Thermal Behavior of Polyelectrolyte Multilayer Microcapsules. 1. The Effect of Odd and Even Layer Number

Picometer Scale Photothermal Tuning of Plasmonic Nanocavities and Interfacial Processes

The ability to precisely tune plasmon resonances is critical for advancing nanophotonic and sensing technologies. In this work, we exploit the photothermal effect to achieve picometer-level tunability of plasmon resonances in nanorod-on-mirror nanocavities, using polyelectrolyte (PE) layers as dielectric spacers. The plasmon-induced thermal response of these soft materials allows real-time adjustment of the nanocavity, unlike stable inorganic spacers like aluminum oxide. Under continuous laser illumination, the PE spacers undergo thickness reduction and phase transitions, leading to significant shifts in plasmon resonances. These shifts are influenced by laser power and initial spacer thickness, which govern near-field enhancement and photothermal effects. It is shown that this precise tuning capability enables the exploration of various photophysical processes, including the excitation of higher-order plasmon modes, optomechanical enhancement of surface-enhanced Raman scattering signals, electron tunneling, molecular diffusion from the nanocavities, and the transition to charge transfer plasmons.

The Buffer Capacity of Polyelectrolyte Microcapsules Depends on the Type of Template

One of the key physicochemical parameters of polyelectrolyte microcapsules (PMCs) is their buffer capacity (BC). The BC of the microcapsules allows for an assessment of the change in protonation state across the entire polyelectrolyte system, which directly impacts the buffer barrier of PMCs, as well as the stability and physical properties of their shell. However, the buffer capacity of PMCs and their behavior under changes in ionic strength and temperature can differ depending on the type of core used to form the microcapsules. As part of this study, we revealed the buffer capacity (BC) of polyelectrolyte microcapsules formed on polystyrene cores (PMCPs) and studied the influence of ionic strength and environmental temperature on the BC of these capsules. We found that the buffer capacity of PMCPs differs from the BC of water at a pH above 8; the addition of sodium chloride leads to an increase in buffer capacity in alkaline conditions, and conversely, thermal treatment leads to its decrease at a pH of 9. The results obtained are different from the BC of polyelectrolyte microcapsules formed on CaCO3 cores, which suggests a difference in the physicochemical properties of these types of capsules. The buffer capacity of polyelectrolyte microcapsules depends on the type of template used.

Multiple dyes applications for fluorescent convertible polymer capsules as macrophages tracking labels

Tracing individual cell pathways among the whole population is crucial for understanding their behavior, cell communication, migration dynamics, and fate. Optical labeling is one approach for tracing individual cells, but it typically requires genetic modification to induce the generation of photoconvertible proteins. Nevertheless, this approach has limitations and is not applicable to certain cell types. For instance, genetic modification often leads to the death of macrophages. This study aims to develop an alternative method for labeling macrophages by utilizing photoconvertible micron-sized capsules capable of easy internalization and prolonged retention within cells. Thermal treatment in a polyvinyl alcohol gel medium is employed for the scalable synthesis of capsules with a wide range of fluorescent dyes, including rhodamine 6G, pyronin B, fluorescein, acridine yellow, acridine orange, thiazine red, and previously reported rhodamine B. The fluorescence brightness, photostability, and photoconversion ability of the capsules are evaluated using confocal laser scanning microscopy. Viability, uptake, mobility, and photoconversion studies are conducted on RAW 264.7 and bone marrow-derived macrophages, serving as model cell lines. The production yield of the capsules is increased due to the use of polyvinyl alcohol gel, eliminating the need for conventional filtration steps. Capsules entrapping rhodamine B and rhodamine 6G meet all requirements for intracellular use in individual cell tracking. Mass spectrometry analysis reveals a sequence of deethylation steps that result in blue shifts in the dye spectra upon irradiation. Cellular studies on macrophages demonstrate robust uptake of the capsules. The capsules exhibit minimal cytotoxicity and have a negligible impact on cell motility. The successful photoconversion of RhB-containing capsules within cells highlights their potential as alternatives to photoconvertible proteins for individual cell labeling, with promising applications in personalized medicine.

Characterization of Polyallylamine/Polystyrene Sulfonate Polyelectrolyte Microcapsules Formed on Solid Cores: Morphology

Polyelectrolyte microcapsules (PMC) based on polyallylamine and polystyrene sulfonate are utilized in various fields of human activity, including medicine, textiles, and the food industry, among others. However, characteristics such as microcapsule size, shell thickness, and pore size are not sufficiently studied and systematized, even though they determine the possibility of using microcapsules in applied tasks. The aim of this review is to identify general patterns and gaps in the study of the morphology of polyelectrolyte microcapsules obtained by the alternate adsorption of polystyrene sulfonate and polyallylamine on different solid cores. First and foremost, it was found that the morphological change in polyelectrolyte microcapsules formed on different cores exhibits a significant difference in response to varying stimuli. Factors such as ionic strength, the acidity of the medium, and temperature have different effects on the size of the microcapsules, the thickness of their shells, and the number and size of their pores. At present, the morphology of the microcapsules formed on the melamine formaldehyde core has been most studied, while the morphology of microcapsules formed on other types of cores is scarcely studied. In addition, modern methods of nanoscale system analysis will allow for an objective assessment of PMC characteristics and provide a fresh perspective on the subject of research.

Labeling and Tracking of Individual Human Mesenchymal Stromal Cells Using Photoconvertible Fluorescent Microcapsules

The behavior and migration of human mesenchymal stromal cells (hMSCs) are focal points of research in the biomedical field. One of the major aspects is potential therapy using hMCS, but at present, the safety of their use is still controversial owing to limited data on changes that occur with hMSCs in the long term. Fluorescent photoconvertible proteins are intensively used today as "gold standard" to mark the individual cells and study single-cell interactions, migration processes, and the formation of pure lines. A crucial disadvantage of this method is the need for genetic modification of the primary culture, which casts doubt on the possibility of exploring the resulting clones in personalized medicine. Here we present a new approach for labeling and tracking hMSCs without genetic modification based on the application of cell-internalizable photoconvertible polyelectrolyte microcapsules (size: 2.6 ± 0.5 μm). These capsules were loaded with rhodamine B, and after thermal treatment, exhibited fluorescent photoconversion properties. Photoconvertible capsules demonstrated low cytotoxicity, did not affect the immunophenotype of the hMSCs, and maintained a high level of fluorescent signal for at least seven days. The developed approach was tested for cell tracking for four days and made it possible to trace the destiny of daughter cells without the need for additional labeling.

Fluorescent polymer markers photoconvertible with a 532 nm laser for individual cell labeling

Fluorescent photoconvertible materials and molecules have been successfully exploited as bioimaging markers and cell trackers. Recently, the novel fluorescent photoconvertible polymer markers have been developed that allow the long-term tracking of individual labeled cells. However, it is still necessary to study the functionality of this type of fluorescent labels for various operating conditions, in particular for commonly used discrete wavelength lasers. In this article, the photoconversion of fluorescent polymer labels with both pulsed and continuous-wave lasers with 532 nm-irradiation wavelength, and under different laser power densities were studied. The photoconversion process was described and its possible mechanism was proposed. The peculiarities of fluorescent polymer capsules performance as an aqueous suspension and as a single capsule were described. We performed the successful nondestructivity marker photoconversion inside RAW 264.7 monocyte/macrophage cells under continuous-wave laser with 532 nm-irradiation wavelength, showing prospects of these fluorescent markers for long-term live cell labeling.

A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules

Transferring the layer-by-layer (LbL) coating approach from planar surfaces to spherical templates and subsequently dissolving these templates leads to the fabrication of polyelectrolyte multilayer capsules. The versatility of the coatings of capsules and their flexibility upon bringing in virtually any material into the coatings has quickly drawn substantial attention. Here, we provide an overview of the main developments in this field, highlighting the trends in the last decade. In the beginning, various methods of encapsulation and release are discussed followed by a broad range of applications, which were developed and explored. We also outline the current trends, where the range of applications is continuing to grow, including addition of whole new and different application areas.

Stability improvement of carboxymethyl cellulose/chitosan complex beads by thermal treatment

Carboxymethyl cellulose (CMC) and chitosan (CHI) are two well-known natural polymer derivatives, as such the CMC@CHI complex beads fulfill many requirements for bio-related and safety-required applications. However, poor mechanical properties of CMC@CHI beads hinder their applications. We managed to improve the beads stability by a simple thermal treatment during the bead preparation. The effects of temperature, changing from 25 °C to 75 °C, on the stability of the formed beads were investigated. The morphology, diameter, shell thickness and structure of the beads treated at different temperature were analyzed using SEM, XPS and FTIR. The mechanical test and swelling experiments showed that the thermal treatment enhanced the bead's ability to withstand pressure and swelling. The beads treated at 75 °C showed the best pressure resistance, while the beads treated at 55 °C exhibited the highest swelling capability without losing integrity. This method is convenient to implement, not only improves the stability, but also controls the swelling capacity and mechanical properties of the beads, which are important for their potential applications in adsorption and controlled release. More importantly, this work offered insights on the effects of thermal treatment on the complexation process of the two polysaccharide molecular chains.

Biocides and techniques for their encapsulation: a review

Biocides are compounds that are broadly used to protect products and equipment against microbiological damage. Encapsulation can effectively increase physicochemical stability and allow for controlled release of encapsulated biocides. We categorized microencapsulation into coacervation, sol-gel, and self-assembly methods. The former comprises internal phase separation, interfacial polymerization, and multiple emulsions, and the latter include polymersomes and layer-by-layer techniques. The focus of this review is the description of these categories based on their microencapsulation methods and mechanisms. We discuss the key features and potential applications of each method according to the characteristics of the biocide to be encapsulated, relating the solubility of biocides to the capsule-forming materials, the reactivity between them and the desired release rate. The role of encapsulation in the safety and toxicity of biocide applications is also discussed. Furthermore, future perspectives for biocide applications and encapsulation techniques are presented.

A Study of the Buffer Capacity of Polyelectrolyte Microcapsules Depending on Their Ionic Environment and Incubation Temperature

Polyelectrolyte microcapsules (PMCs) are used in the development of new forms of drugs, coatings and diagnostic systems. Their buffer capacity, depending on the conditions of the medium, has not been practically studied, although it can affect the structure of both the capsule itself and the encapsulated agents. In this connection, we studied the buffer capacity of polyelectrolyte microcapsules of the composition (polystyrene sulfonate/polyallylamine)₃ ((PSS/PAH)₃) depending on the concentration and the type of salt in solution, as well as the microcapsule incubation temperature. It was found that the buffer capacity of microcapsules in the presence of mono- and di-valent salts of the same ionic strength did not differ practically. Increasing the NaCl concentration to 1 M led to an increase of buffer capacity of PMCs at pH ≥ 5, and an increase in NaCl concentration above 1 M did not change buffer capacity. The study of the buffer capacity of pre-heated PMCs showed that buffer capacity decreased with increasing incubation temperature, which was possibly due to the compaction of the PMCs and an increase in the number of compensated PAH sites. The addition of 1 M sodium chloride to heated PMCs presumably reversed the process described above, since an increase in the ionic strength of the solution led to an increase of the buffer capacity of the PMCs. The effects described above confirm the hypothesis put forward that the buffer properties of microcapsules are determined by uncompensated PAH regions in their composition.

Biopolymer-Based Multilayer Capsules and Beads Made via Templating: Advantages, Hurdles and Perspectives

One of the undeniable trends in modern bioengineering and nanotechnology is the use of various biomolecules, primarily of a polymeric nature, for the design and formulation of novel functional materials for controlled and targeted drug delivery, bioimaging and theranostics, tissue engineering, and other bioapplications. Biocompatibility, biodegradability, the possibility of replicating natural cellular microenvironments, and the minimal toxicity typical of biogenic polymers are features that have secured a growing interest in them as the building blocks for biomaterials of the fourth generation. Many recent studies showed the promise of the hard-templating approach for the fabrication of nano- and microparticles utilizing biopolymers. This review covers these studies, bringing together up-to-date knowledge on biopolymer-based multilayer capsules and beads, critically assessing the progress made in this field of research, and outlining the current challenges and perspectives of these architectures. According to the classification of the templates, the review sequentially considers biopolymer structures templated on non-porous particles, porous particles, and crystal drugs. Opportunities for the functionalization of biopolymer-based capsules to tailor them toward specific bioapplications is highlighted in a separate section.

Communicating assemblies of biomimetic nanocapsules

Communication assemblies between biomimetic nanocapsules in a 3D closed system with self-regulating and self-organization functionalities were demonstrated for the first time. Two types of biomimetic nanocapsules, TiO2/polydopamine capsules and SiO2/polyelectrolytes capsules with different stimuli-responsive properties were prepared and leveraged to sense the external stimulus, transmit chemical signaling, and autonomic communication-controlled release of active cargos. The capsules have clear core-shell structures with average diameters of 30 nm and 25 nm, respectively. The nitrogen adsorption-desorption isotherms and thermogravimetric analysis displayed their massive pore structures and encapsulation capacity of 32% of glycine pH buffer and 68% of benzotriazole, respectively. Different from the direct release mode of the single capsule, the communication assemblies show an autonomic three-stage release process with a "jet lag" feature, showing the internal modulation ability of self-controlled release efficiency. The control overweight ratios of capsules influences on communication-release interaction between capsules. The highest communication-release efficiency (89.6% of benzotriazole) was achieved when the weight ratio of TiO2/polydopamine/SiO2/polyelectrolytes capsules was 5 : 1 or 10 : 1. Communication assemblies containing various types of nanocapsules can autonomically perform complex tasks in a biomimetic fashion, such as cascaded amplification and multidirectional communication platforms in bioreactors.

All-Dielectric Nanostructures with a Thermoresponsible Dynamic Polymer Shell

We suggest a new strategy for creating stimuli-responsive bio-integrated optical nanostructures based on Mie-resonant silicon nanoparticles covered by an ensemble of similarity negatively charged polyelectrolytes (heparin and sodium polystyrene sulfonate). The dynamic tuning of the nanostructures' optical response is due to light-induced heating of the nanoparticles and swelling of the polyelectrolyte shell. The resulting hydrophilic/hydrophobic transitions significantly change the shell thickness and reversible shift of the scattering spectra for individual nanoparticles up to 60 nm. Our findings bring novel opportunities for the application of smart nanomaterials in nanomedicine and bio-integrated nanophotonics.

Durable Polyelectrolyte Microcapsules with Near-Infrared-Triggered Loading and Nondestructive Release of Cargo

Microcapsules formed using a "layer-by-layer" alternating deposition of oppositely charged polyelectrolytes on sacrificial templates have reached high interest because of their facile fabrication procedure using a broad range of materials and tailored properties. However, their practical applications as microcarriers are limited as the capsules commonly suffer from low mechanical stability that can be enhanced by chemical or physical crosslinking but at the expense of decreasing permeability of the capsules' walls. It is demonstrated here that the incorporation of multiwalled carbon nanotubes in a relatively small amount (3.5%) arranged in the direction perpendicular to the capsules' walls led to an almost 20-fold increase of the apparent elastic modulus of the microcapsules as shown using the osmotic pressure method. Importantly, the introduced carbon nanotubes due to their absorption in the near-infrared region and specific arrangement enabled also a light-triggered increase of permeability of the capsules in a reversible, nondestructive manner as shown using fluorescently labeled dextrans of various molar masses. Such results imply durability and facile loading/unloading of the microcapsules that are both crucial for their practical applications as microcontainers and microreactors.

Emerging trends in the dynamics of polyelectrolyte complexes

Polyelectrolyte complexes (PECs) are highly tunable materials that result from the phase separation that occurs upon mixing oppositely charged polymers. Over the years, they have gained interest due to their broad range of applications such as drug delivery systems, protective coatings, food packaging, and surface adhesives. In this review, we summarize the structure, phase transitions, chain dynamics, and rheological and thermal properties of PECs. Although most literature focuses upon the thermodynamics and application of PECs, this review highlights the fundamental role of salt and water on mechanical and thermal properties impacting the PEC's dynamics. A special focus is placed upon experimental results and techniques. Specifically, the review examines phase behaviour and salt partitioning in PECs, as well as different techniques used to measure diffusion coefficients, relaxation times, various superpositioning principles, glass transitions, and water microenvironments in PECs. This review concludes with future areas of opportunity in fundamental studies and best practices in reporting.

Layer-By-Layer Assemblies of Biopolymers: Build-Up, Mechanical Stability and Molecular Dynamics

Rapid development of versatile layer-by-layer technology has resulted in important breakthroughs in the understanding of the nature of molecular interactions in multilayer assemblies made of polyelectrolytes. Nowadays, polyelectrolyte multilayers (PEM) are considered to be non-equilibrium and highly dynamic structures. High interest in biomedical applications of PEMs has attracted attention to PEMs made of biopolymers. Recent studies suggest that biopolymer dynamics determines the fate and the properties of such PEMs; however, deciphering, predicting and controlling the dynamics of polymers remains a challenge. This review brings together the up-to-date knowledge of the role of molecular dynamics in multilayers assembled from biopolymers. We discuss how molecular dynamics determines the properties of these PEMs from the nano to the macro scale, focusing on its role in PEM formation and non-enzymatic degradation. We summarize the factors allowing the control of molecular dynamics within PEMs, and therefore to tailor polymer multilayers on demand.

Encapsulation of Low-Molecular-Weight Drugs into Polymer Multilayer Capsules Templated on Vaterite CaCO3 Crystals

Polyelectrolyte multilayer capsules (PEMCs) templated onto biocompatible and easily degradable vaterite CaCO₃ crystals via the layer-by-layer (LbL) polymer deposition process have served as multifunctional and tailor-made vehicles for advanced drug delivery. Since the last two decades, the PEMCs were utilized for effective encapsulation and controlled release of bioactive macromolecules (proteins, nucleic acids, etc.). However, their capacity to host low-molecular-weight (LMW) drugs (<1–2 kDa) has been demonstrated rather recently due to a limited retention ability of multilayers to small molecules. The safe and controlled delivery of LMW drugs plays a vital role for the treatment of cancers and other diseases, and, due to their tunable and inherent properties, PEMCs have shown to be good candidates for smart drug delivery. Herein, we summarize recent progress on the encapsulation of LMW drugs into PEMCs templated onto vaterite CaCO₃ crystals. The drug loading and release mechanisms, advantages and limitations of the PEMCs as LMW drug carriers, as well as bio-applications of drug-laden capsules are discussed based upon the recent literature findings.

In Vitro Bioeffects of Polyelectrolyte Multilayer Microcapsules Post-Loaded with Water-Soluble Cationic Photosensitizer

Microencapsulation and targeted delivery of cytotoxic and antibacterial agents of photodynamic therapy (PDT) improve the treatment outcomes for infectious diseases and cancer. In many cases, the loss of activity, poor encapsulation efficiency, and inadequate drug dosing hamper the success of this strategy. Therefore, the development of novel and reliable microencapsulated drug formulations granting high efficacy is of paramount importance. Here we report the in vitro delivery of a water-soluble cationic PDT drug, zinc phthalocyanine choline derivative (Cholosens), by biodegradable microcapsules assembled from dextran sulfate (DS) and poly-l-arginine (PArg). A photosensitizer was loaded in pre-formed [DS/PArg]4 hollow microcapsules with or without exposure to heat. Loading efficacy and drug release were quantitatively studied depending on the capsule concentration to emphasize the interactions between the DS/PArg multilayer network and Cholosens. The loading data were used to determine the dosage for heated and intact capsules to measure their PDT activity in vitro. The capsules were tested using human cervical adenocarcinoma (HeLa) and normal human dermal fibroblast (NHDF) cell lines, and two bacterial strains, Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. Our results provide compelling evidence that encapsulated forms of Cholosens are efficient as PDT drugs for both eukaryotic cells and bacteria at specified capsule-to-cell ratios.

Multilayer capsules made of weak polyelectrolytes: a review on the preparation, functionalization and applications in drug delivery

Multilayer capsules have been of great interest for scientists and medical communities in multidisciplinary fields of research, such as drug delivery, sensing, biomedicine, theranostics and gene therapy. The most essential attributes of a drug delivery system are considered to be multi-functionality and stimuli responsiveness against a range of external and internal stimuli. Apart from the highly explored strong polyelectrolytes, weak polyelectrolytes offer great versatility with a highly controllable architecture, unique stimuli responsiveness and easy tuning of the properties for intracellular delivery of cargo. This review describes the progress in the preparation, functionalization and applications of capsules made of weak polyelectrolytes or their combination with biopolymers. The selection of a sacrificial template for capsule formation, the driving forces involved, the encapsulation of a variety of cargo and release based on different internal and external stimuli have also been addressed. We describe recent perspectives and obstacles of weak polyelectrolyte/biopolymer systems in applications such as therapeutics, biosensing, bioimaging, bioreactors, vaccination, tissue engineering and gene delivery. This review gives an emerging outlook on the advantages and unique responsiveness of weak polyelectrolyte based systems that can enable their widespread use in potential applications.

Classification of analytics, sensorics, and bioanalytics with polyelectrolyte multilayer capsules

Polyelectrolyte multilayer (PEM) capsules, constructed by LbL (layer-by-layer)-adsorbing polymers on sacrificial templates, have become important carriers due to multifunctionality of materials adsorbed on their surface or encapsulated into their interior. They have been also been used broadly used as analytical tools. Chronologically and traditionally, chemical analytics has been developed first, which has long been synonymous with all analytics. But it is not the only development. To the best of our knowledge, a summary of all advances including their classification is not available to date. Here, we classify analytics, sensorics, and biosensorics functionalities implemented with polyelectrolyte multilayer capsules and coated particles according to the respective stimuli and application areas. In this classification, three distinct categories are identified: (I) chemical analytics (pH; K⁺, Na⁺, and Pb²⁺ ion; oxygen; and hydrogen peroxide sensors and chemical sensing with surface-enhanced Raman scattering (SERS)); (II) physical sensorics (temperature, mechanical properties and forces, and osmotic pressure); and (III) biosensorics and bioanalytics (fluorescence, glucose, urea, and protease biosensing and theranostics). In addition to this classification, we discuss also principles of detection using the above-mentioned stimuli. These application areas are expected to grow further, but the classification provided here should help (a) to realize the wealth of already available analytical and bioanalytical tools developed with capsules using inputs of chemical, physical, and biological stimuli and (b) to position future developments in their respective fields according to employed stimuli and application areas. Graphical abstract.

Hybrids of Polymeric Capsules, Lipids, and Nanoparticles: Thermodynamics and Temperature Rise at the Nanoscale and Emerging Applications

The importance of thermodynamics does not need to be emphasized. Indeed, elevated temperature processes govern not only industrial scale production but also self-assembly, chemical reaction, interaction between molecules, etc. Not surprisingly, biological processes typically take place at a specific temperature. Here, we look at possibilities to raise the localized temperature by a laser around noble-metal nanoparticles incorporated into shells of layer-by-layer polyelectrolyte microcapsules-freely suspended delivery vehicles in an aqueous solution, developed in the Department of Interfaces, Max Planck Institute of Colloids and Interfaces, headed by Helmuth Möhwald. Understanding the mechanisms of localized temperature rise is essential, that is why we analyze the influence of incident intensity, nanoparticle size, their distribution and aggregation state, as well as thermodynamics at the nanoscale. This leads us to scrutinize "global" (used for thermal encapsulation) versus "local" (used for release of encapsulated materials) temperature rise. Similar analysis is extended to planar polymeric coatings, the lipid membrane system of vesicles and cells, on which nanoparticles are adsorbed. Insights are provided into the mechanisms of physicochemical and biological effects, the nature of which has always been profoundly, interactively, and engagingly discussed in the Department of Interfaces. This analysis is combined with recent developments providing outlook and highlighting a broad range of emerging applications.

Nanocontainer-Based Active Systems: From Self-Healing Coatings to Thermal Energy Storage

We highlight the development of nanocontainer-based active materials started in 2006 at the Max Planck Institute of Colloids and Interfaces under the supervision of Prof. Helmuth Möhwald. The active materials encapsulated in the nanocontainers with controlled shell permeability have been first applied for self-healing coatings with controlled release of the corrosion inhibitor. The nanocontainers have been added to the paint formulation matrix at 5-10 wt % concentration, which resulted in attaining a coating-autonomous self-healing ability. This research idea has attracted the attention of many scientists around the world (>1500 publications during the last 10 years) and has already been transferred to the commercialization level. The current trend in nanocontainer-based active systems is devoted to the multifunctionality of the capsules which can combine self-healing, antibacterial, thermal, and other functionalities into one host matrix. This article summarizes the previous research done in the area of nanocontainer-based active materials together with future perspectives of capsule-based materials with antifouling or thermoregulating activity.

Recent progress in preparation and agricultural application of microcapsules

Recent advances in life science technology have prompted the need to develop microcapsule delivery systems that can encapsulate many different functional or active materials such as drugs, peptides, and live cells, etc. The encapsulation technology is now commonly used in medicine, agriculture, food, and other many fields. The application of biodegradable microcapsule systems can not only effectively prevent the degradation of core materials in the body or the biological environment, but also improve the bioavailability, control the release and prolong the halftime or storage of core active materials. Various wall materials, preparation methods, encapsulation processes, and release mechanisms are covered in this review, as well as several main factors including pH values, temperatures, particle sizes, and additives, which can strongly influence the encapsulation efficiency, the strength, and release of microcapsules. The improvement of coating materials, preparation techniques, and challenges are also highlighted, as well as application prospects.

Triple-Stimuli-Responsive Smart Nanocontainers Enhanced Self-Healing Anticorrosion Coatings for Protection of Aluminum Alloy

Novel acid/alkali/corrosion potential triple-stimuli-responsive smart nanocontainers (TSR-SNs) were successfully assembled to regulate the release of an encapsulated corrosion inhibitor, benzotriazole (BTA), by installing specially structured bistable pseudorotaxanes as supramolecular nanovalves onto orifices of mesoporous silica nanoparticles. In normal conditions, BTA molecules were sealed in the mesopores. Upon any stimulus of acid, alkali, or corrosion potential, BTA molecules were quickly released because of the open states of the supramolecular nanovalves. TSR-SNs as smart nanocontainers were added into the SiO₂-ZrO₂ sol-gel coating to fabricate a stimuli-feedback, corrosion-compensating self-healing anticorrosion coating (SF-SHAC). Compared with the conventional pH-responsive smart nanocontainers synthesized for the SHAC, TSR-SNs not only respond to the pH changes occurring on corrosive microregions but also, and more importantly, feel the corrosion potential of aluminum alloys and give quick feedback. This design avoids wasting smart nanocontainers because of the local-dependent, gradient pH stimulus intensities and obviously enhances the response sensitivity of the SF-SHAC. Electrochemical impedance spectroscopy and salt spray tests prove the excellent physical barrier of the SF-SHAC. Through scanning vibrating electrode technique measurements, the SF-SHAC doped with TSR-SNs demonstrates inhibiting rates for corrosive microcathodic/anodic current densities that are faster than other control SHACs. The new incorporated corrosion potential-responsive function ensures the efficient working efficiency of TSR-SNs and makes full use of the preloaded corrosion inhibitors as repair factors.

Nanocontainer-based self-healing coatings: current progress and future perspectives

Nanocontainers add more functionalities to the standard coating formulations.

Ultrathin Shell Layers Dramatically Influence Polymer Nanoparticle Surface Mobility

Advances in nanoparticle synthesis, self-assembly, and surface coating or patterning have enabled a diverse array of applications ranging from photonic and phononic crystal fabrication to drug delivery vehicles. One of the key obstacles restricting its potential is structural and thermal stability. The presence of a glass transition can facilitate deformation within nanoparticles, thus resulting in a significant alteration in structure and performance. Recently, we detected a glassy-state transition within individual polystyrene nanoparticles and related its origin to the presence of a surface layer with enhanced dynamics compared to the bulk. The presence of this mobile layer could have a dramatic impact on the thermal stability of polymer nanoparticles. Here, we demonstrate how the addition of a shell layer, as thin as a single polymer chain, atop the nanoparticles could completely eliminate any evidence of enhanced mobility at the surface of polystyrene nanoparticles. The ultrathin polymer shell layers were placed atop the nanoparticles via two approaches: (i) covalent bonding or (ii) electrostatic interactions. The temperature dependence of the particle vibrational spectrum, as recorded by Brillouin light scattering, was used to probe the surface mobility of nanoparticles with and without a shell layer. Beyond suppression of the surface mobility, the presence of the ultrathin polymer shell layers impacted the nanoparticle glass transition temperature and shear modulus, albeit to a lesser extent. The implication of this work is that the core-shell architecture allows for tailoring of the nanoparticle elasticity, surface softening, and glass transition temperature.

Water Uptake of Polyelectrolyte Multilayers Including Water Condensation in Voids

The paper addresses the swelling of polyelectrolyte multilayers (PEMs) at varying humidity. In particular, a new model will be presented, which takes the gradual filling of voids into account. Absorption of water results in PEM swelling. This absorbed water can be distinguished into swelling and void water. Swelling water leads to an increase in thickness and a change of the optical properties of PEMs, while the void water results only in a change of the optical properties. In former studies, neutron reflectometry was used to distinguish between swelling and void water. However, as we show in this study, it is possible to resolve the two different kinds of water in PEMs by ellipsometry, a much simpler tool. The present study evaluates and interprets the refractive index of polystyrenesulfonate/polydiallyldimethylammonium chloride (PSS/PDADMAC) PEMs. Both the swelling behavior and the refractive index change as a function of relative humidity and were found to be independent of the layer number. The void model and the extended void model were used to describe the data. The void model allows fitting the experimentally determined refractive index at humidity beyond 20% RH but fails for humidity lower than 20% RH. Therefore, we modified the existing model in order to account for air-water exchange. The extended void model assumes a gradual air-water exchange at low h and describes the refractive index over the entire humidity range in a precise way. Up to 30% RH, air and water coexist. Above this threshold, the voids are completely filled with water and this threshold does not change either with layer number or with the outermost layer. Furthermore, this model allows the determination of the volume fraction of the voids (0.05 ± 0.01) and the refractive index of the pure polymer matter (1.592 ± 0.002).

Molecular Origin of the Glass Transition in Polyelectrolyte Assemblies

Water plays a central role in the assembly and the dynamics of charged systems such as proteins, enzymes, DNA, and surfactants. Yet it remains a challenge to resolve how water affects relaxation at a molecular level, particularly for assemblies of oppositely charged macromolecules. Here, the molecular origin of water's influence on the glass transition is quantified for several charged macromolecular systems. It is revealed that the glass transition temperature (Tg) is controlled by the number of water molecules surrounding an oppositely charged polyelectrolyte-polyelectrolyte intrinsic ion pair as 1/Tg ∼ ln(nH2O/nintrinsic ion pair). This relationship is found to be "general", as it holds for two completely different types of charged systems (pH- and salt-sensitive) and for both polyelectrolyte complexes and polyelectrolyte multilayers, which are made by different paths. This suggests that water facilitates the relaxation of charged assemblies by reducing attractions between oppositely charged intrinsic ion pairs. This finding impacts current interpretations of relaxation dynamics in charged assemblies and points to water's important contribution at the molecular level.

Biocompatible Nanocoatings of Fluorinated Polyphosphazenes through Aqueous Assembly

Nonionic fluorinated polyphosphazenes, such as poly[bis(trifluoroethoxy)phosphazene] (PTFEP), display superb biocompatibility, yet their deposition to surfaces has been limited to solution casting from organic solvents or thermal molding. Herein, hydrophobic coatings of fluorinated polyphosphazenes are demonstrated through controlled deposition of ionic fluorinated polyphosphazenes (iFPs) from aqueous solutions using the layer-by-layer (LbL) technique. Specifically, the assemblies included poly[(carboxylatophenoxy)(trifluoroethoxy)phosphazenes] with varied content of fluorine atoms as iFPs (or poly[bis(carboxyphenoxy)phosphazene] (PCPP) as a control nonfluorinated polyphosphazene) and a variety of polycations. Hydrophobic interactions largely contributed to the formation of LbL films of iFPs with polycations, leading to linear growth and extremely low water uptake. Hydrophobicity-enhanced ionic pairing within iFP/BPEI assemblies gave rise to large-amplitude oscillations in surface wettability as a function of capping layer, which were the largest for the most fluorinated iFP, while control PCPP/polycation systems remained hydrophilic regardless of the film top layer. Neutron reflectometry (NR) studies indicated superior layering and persistence of such layering in salt solution for iFP/BPEI films as compared to control PCPP/polycation systems. Hydrophobicity of iFP-capped LbL coatings could be further enhanced by using a highly porous polyester surgical felt rather than planar substrates for film deposition. Importantly, iFP/polycation coatings displayed biocompatibility which was similar to or superior to that of solution-cast coatings of a clinically validated material (PTFEP), as demonstrated by the hemolysis of the whole blood and protein adsorption studies.

Bioinspired dynamic microcapsules

There is an increasing interest in bioinspired dynamic materials. Abundant illustrations of protein domains exist in nature, with remarkable ligand binding characteristics and structures that undergo conformational changes. For example, calmodulin (CaM) can have three conformational states, which are the unstructured Apo-state, Ca²⁺-bound ligand-exposed binding state, and compact ligand-bound state. CaM's mechanical response to biological cues is highly suitable for engineering dynamic materials. The distance between CaM globular terminals in the Ca²⁺-bound state is 5 nm and in the ligand-bound state is 1.5 nm. CaM's nanoscale conformational changes have been used to develop dynamic hydrogel microspheres that undergo reversible volume changes. The current work presents the fabrication and preliminary results of layer-by-layer (LbL) self-assembled Dynamic MicroCapsules (DynaMicCaps) whose multilayered shell walls are composed of polyelectrolytes and CaM. Quasi-dynamic perfusion results show that the DynaMicCaps undergo drastic volume changes, with up to ∼1500% increase, when exposed to a biochemical ligand trifluoperazine (TFP) at pH 6.3. Under similar test conditions, microcapsules without CaM also underwent volume changes, with only up to ∼290% increase, indicating that CaM's bio-responsiveness was retained within the shell walls of the DynaMicCaps. Furthermore, DynaMicCaps exposed to 0.1 M NaOH underwent volume changes, with only up to ∼580% volume increase. Therefore, DynaMicCaps represent a new class of polyelectrolyte multilayer (PEM) capsules that can potentially be used to release their payload at near physiological pH. With over 200 proteins that undergo marked, well-characterized conformational changes in response to specific biochemical triggers, several other versions of DynaMicCaps can potentially be developed.