Structure and Bonding of the Multifunctional Amino Acid l-DOPA on Au(110)

Diblock Copolymers of Methacryloyloxyethyl Phosphorylcholine and Dopamine Methacrylamide: Synthesis and Real-Time Adsorption Dynamics by SEIRAS and RAIRS

Amphiphilic diblock copolymers containing a block of 2-methacryloyloxyethyl phosphorylcholine (MPC) with unique properties to prevent nonspecific protein adsorption and enhance lubrication in aqueous media and a block of dopamine methacrylamide (DOPMA) distinguished by excellent adhesion performance were synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization for the first time. The DOPMA monomer with an acetonide-protected catechol group (acetonide-protected dopamine methacrylamide (ADOPMA)) was used, allowing the prevention of undesirable side reactions during polymerization and oxidation during storage. The adsorption behavior of the diblock copolymers with protected and unprotected catechol groups on gold surfaces was probed using attenuated total reflection (ATR)-Fourier transform infrared (FTIR) spectroscopy, surface-enhanced infrared absorption spectroscopy (SEIRAS), and reflection-absorption infrared spectroscopy (RAIRS). The copolymers pMPC-b-pADOPMA demonstrated physisorption with rapid adsorption and ultrasound-assisted desorption, while the copolymers pMPC-b-DOPMA exhibited chemical adsorption with slower dynamics but a stronger interaction with the gold surface. SEIRAS and RAIRS allowed proving the reorientation of the diblock copolymers during adsorption, demonstrating the exposure of the pMPC block toward the aqueous phase.

Protein-based bioactive coatings: from nanoarchitectonics to applications

Protein-based bioactive coatings have emerged as a versatile and promising strategy for enhancing the performance and biocompatibility of diverse biomedical materials and devices. Through surface modification, these coatings confer novel biofunctional attributes, rendering the material highly bioactive. Their widespread adoption across various domains in recent years underscores their importance. This review systematically elucidates the behavior of protein-based bioactive coatings in organisms and expounds on their underlying mechanisms. Furthermore, it highlights notable advancements in artificial synthesis methodologies and their functional applications in vitro. A focal point is the delineation of assembly strategies employed in crafting protein-based bioactive coatings, which provides a guide for their expansion and sustained implementation. Finally, the current trends, challenges, and future directions of protein-based bioactive coatings are discussed.

L-DOPA coating improved phosphate glass fibre strength and fibre/matrix interface

The levodopa (L-DOPA) has been reported as a promising adhesive for various materials. In this study, we utilized L-DOPA as an interfacial agent for phosphate glass fibre/polycaprolactone (PGF/PCL) composites, with the aim to enhance the interfacial properties between the fibres and polymer matrix. The PGFs were dip-coated in varying concentrations of L-DOPA solution ranging between 5 and 40 g L-1. The fibre strength and interfacial shear strength (IFSS) of the composites were measured via a single fibre tensile test and single fibre fragmentation test, respectively. It was found that the L-DOPA agent (at conc. 10 g L-1) significantly improved the IFSS of the composites up to 27%. Also, the L-DOPA coating (at conc. 40 g L-1) significantly increased the glass fibre strength up to 18%. As a result, an optimum coating level could be tailored depending on application and whether fibre strength or IFSS was of greater importance. In addition, SEM and TGA analyses were used to detect and quantify the coating agents. FTIR and XPS further confirmed presence of the coating and indicated the zwitterionic crystals of L-DOPA and the formation of a melanin-like polymer layer. The spectroscopy data also evidenced that both catechol and amine groups contributed to the interaction between the L-DOPA and the PGF surface.

Unleashing the shape of L-DOPA at last

Herein, we report the first rotational study of neutral L-DOPA, an extensively used supramolecular synthon and an amino acid precursor of the neurotransmitters dopamine, norepinephrine (noradrenaline), and epinephrine (adrenaline) using broadband and narrowband Fourier transform microwave spectroscopies coupled with a laser ablation vaporization system. The spectroscopic parameters derived from the analysis of the rotational spectrum conclusively identify the existence of four distinct conformers of L-DOPA in the supersonic jet, further rejecting the previously reported catechol ring-induced conformational restriction. The analysis of the ¹⁴N nuclear quadrupole coupling hyperfine structure further revealed the orientation of the N-bearing functional group, proving the existence of stabilizing N-H⋯π interactions for the observed structures.

Engineering the Cellulose Fiber Interface in a Polymer Composite by Mussel-Inspired Adhesive Nanoparticles with Intrinsic Stress-Sensitive Responsivity

The interface between the fiber and matrix plays a key role in polymer composite performance and is adapted by chemical modification of the fiber surface. In this study, biomimetic adhesive nanoparticles formed by the self-assembly of polymer-peptide amphiphiles with a polydiacetelyene tail and local presentation of 3-hydroxyphenylalanine or DOPA adhesive groups at the outer surface are adsorbed on cellulose fiber surfaces for (i) probing the nanoscale adhesion in combination with a functionalized atomic force microscopy tip and (ii) evaluating the macroscale adhesion by single-fiber pull out tests from a solvent cast cellulose/poly(methyl methacrylate) composite. The interface properties are altered by changing the structure of the nanoparticles into either vesicular or planar shapes depending on the number of incorporated amphiphiles with adhesive groups and the nanoparticle concentration at the cellulose fiber surface. Based on nanoscale adhesive measurements, the adhesion force on modified cellulose fibers increases as a function of the nanoparticle concentration and is higher for the vesicular than for the planar nanoparticle structures. However, the local presentation and number of adhesive groups seems to rule over the surface roughness effects. From macrosale tests, an optimum concentration of adhesive vesicles provides maximum interface strength, while the formation of nanoparticle multilayers at higher concentrations results in lower interface adhesion. In addition, the intrinsic fluorescent properties of the adhesive vesicles under mechanical stress provide a unique tool to evaluate local failure and stress concentrations in the fiber/matrix interface. The incorporation of both adhesive and sensitive properties and versatility of the adhesive functional group may be an attractive strategy for the surface modification of fiber-reinforced composites in general.

Mixed-matrix membranes with enhanced antifouling activity: probing the surface-tailoring potential of Tiron and chromotropic acid for nano-TiO2

Mixed-matrix membranes (MMMs) were developed by impregnating organofunctionalized nanoadditives within fouling-susceptible polysulfone matrix following the non-solvent induced phase separation (NIPS) method. The facile functionalization of nanoparticles of anatase TiO₂ (nano-TiO₂) by using two different organoligands, viz. Tiron and chromotropic acid, was carried out to obtain organofunctionalized nanoadditives, F_T-nano-TiO₂ and F_C-nano-TiO₂, respectively. The structural features of nanoadditives were evaluated by X-ray diffraction, X-ray photoelectron spectroscopy, Raman and Fourier transform infrared spectroscopy, which established that Tiron leads to the blending of chelating and bridging bidentate geometries for F_T-nano-TiO₂, whereas chromotropic acid produces bridging bidentate as well as monodentate geometries for F_C-nano-TiO₂. The surface chemistry of the studied membranes, polysulfone (Psf): F_T-nano-TiO₂ UF and Psf: F_C-nano-TiO₂ UF, was profoundly influenced by the benign distributions of the nanoadditives enriched with distinctly charged sites ([Formula: see text]), as evidenced by superior morphology, improved topography, enhanced surface hydrophilicity and altered electrokinetic features. The membranes exhibited enhanced solvent throughputs, viz. 3500-4000 and 3400-4300 LMD at 1 bar of transmembrane pressure, without significant compromise in their rejection attributes. The flux recovery ratios and fouling resistive behaviours of MMMs towards bovine serum albumin indicated that the nanoadditives could impart stable and appreciable antifouling activity, potentially aiding in a sustainable ultrafiltration performance.

Resolving Non-Specific and Specific Adhesive Interactions of Catechols at Solid/Liquid Interfaces at the Molecular Scale

The adhesive system of mussels evolved into a powerful and adaptive system with affinity to a wide range of surfaces. It is widely known that thereby 3,4-dihydroxyphenylalanine (Dopa) plays a central role. However underlying binding energies remain unknown at the single molecular scale. Here, we use single-molecule force spectroscopy to estimate binding energies of single catechols with a large range of opposing chemical functionalities. Our data demonstrate significant interactions of Dopa with all functionalities, yet most interactions fall within the medium-strong range of 10-20 kB T. Only bidentate binding to TiO2 surfaces exhibits a higher binding energy of 29 kB T. Our data also demonstrate at the single-molecule level that oxidized Dopa and amines exhibit interaction energies in the range of covalent bonds, confirming the important role of Dopa for cross-linking in the bulk mussel adhesive. We anticipate that our approach and data will further advance the understanding of biologic and technologic adhesives.

One-step continuous synthesis of functionalized magnetite nanoflowers

For the first time, functionalized magnetite nanoparticles (Fe3O4 NPs) that form aggregates with a nanoflower morphology were synthesized using a rapid (11 s) one-step continuous hydrothermal process, which was recently modified, and their application as a T 2 magnetic resonance imaging (MRI) contrast agent was evaluated. The nanoparticles functionalized with 3,4-dihydroxy-L-phenylalanine (LDOPA) or 3,4-dihydroxyhydrocinnamic acid (DHCA) consisted of small crystallites of approximately 15 nm of diameter that assembled to form flower-shaped aggregate structures. The Fe3O4-LDOPA nanoflowers exhibited a high transverse relaxivity, r 2 of 418 ± 10 l mmolFe (-1) s(-1) at 3 T owing to magnetic dipolar interactions, which is twice as that of the commercial Feridex®/Endorem®. The prepared nanostructures were compared with bare Fe3O4 NPs and citrated Fe3O4 NPs. DHCA, LDOPA, and citric acid (CA) were found to have an anti-oxidizing effect and to influence the crystallite size and the lattice parameter of the NPs. DHCA and LDOPA increased the crystallite size, whereas CA decreased it. Surface modification increased the colloidal stability of NPs as compared to bare NPs. Nanoflower suspensions of Fe3O4-LDOPA NPs were found to be stable in the phosphate-buffered saline, saline medium, and minimal essential medium and formed aggregates of sizes smaller than 120 nm. All samples were found to be superparamagnetic in nature and the highest saturation magnetization was obtained for the Fe3O4-LDOPA samples. These NPs can bind to polymers such as PEG, and to fluorescent and chelating agents owing to the presence of free -NH2 or -COOH groups on the surface of NPs, allowing their use in dual imaging applications.

Adsorption configuration of sodium 2-quinoxalinecarboxylate on iron substrate: Investigation by in situ SERS, XPS and theoretical calculation

The adsorption geometry of sodium 2-quinoxalinecarboxylate (2-QC) on iron surface was investigated by in situ surface-enhanced Raman scattering spectroscopy (SERS) and X-ray photoelectron spectroscopy (XPS) measurements. The density functional theory (DFT) calculations predicted that 2-QC ion was a highly efficient inhibitor and N as well as O atoms were the possible adsorption centers, and theoretically offered the Raman-active band position and intensity. Potential-dependent SERS results suggested that the 2-QC strongly bonded to the iron surface via the lone pair electrons of the two O atoms of the carboxylate group in a bidentate configuration with a vertical orientation at more positive potentials; However, at -1.0 V, only one O atom of the carboxylate and the neighboring N(1) atom (or very close to surface) adsorbed on the iron surface forming an unidentate configuration with a titled orientation. The ions did not remain on the iron surface at more negative potentials.

Bridging adhesion of mussel-inspired peptides: role of charge, chain length, and surface type

The 3,4-dihydroxyphenylalanine (Dopa)-containing proteins of marine mussels provide attractive design paradigms for engineering synthetic polymers that can serve as high performance wet adhesives and coatings. Although the role of Dopa in promoting adhesion between mussels and various substrates has been carefully studied, the context by which Dopa mediates a bridging or nonbridging macromolecular adhesion to surfaces is not understood. The distinction is an important one both for a mechanistic appreciation of bioadhesion and for an intelligent translation of bioadhesive concepts to engineered systems. On the basis of mussel foot protein-5 (Mfp-5; length 75 res), we designed three short, simplified peptides (15-17 res) and one relatively long peptide (30 res) into which Dopa was enzymatically incorporated. Peptide adhesion was tested using a surface forces apparatus. Our results show that the short peptides are capable of weak bridging adhesion between two mica surfaces, but this adhesion contrasts with that of full length Mfp-5, in that (1) while still dependent on Dopa, electrostatic contributions are much more prominent, and (2) whereas Dopa surface density remains similar in both, peptide adhesion is an order of magnitude weaker (adhesion energy E(ad) ∼ -0.5 mJ/m(2)) than full length Mfp-5 adhesion. Between two mica surfaces, the magnitude of bridging adhesion was approximately doubled (E(ad) ∼ -1 mJ/m(2)) upon doubling the peptide length. Notably, the short peptides mediate much stronger adhesion (E(ad) ∼ -3.0 mJ/m(2)) between mica and gold surfaces, indicating that a long chain length is less important when different interactions are involved on each of the two surfaces.

Functionalized Fe3O4 nanoparticles: influence of ligand addition sequence and pH during their continuous hydrothermal synthesis

New efficient ways to synthesize and modify in situ magnetite NPs are reported according to pH, concentration and addition sequence.

Surface functionalization by decal-like transfer of thermally cross-linked urushiol thin films

We have demonstrated surface functionalization through the decal-like transfer of thermally cross-linked urushiol thin films onto various substrates. Tensile adhesive strength measurements showed that the film adheres strongly to the surface of various substrates including chemically inert materials, such as polyolefins and thermosetting resins, because of the properties of urushiol. Furthermore, the highly cross-linked structure of urushiol made the films mechanically robust. These two properties allowed the fabrication of practicable thin films for indirect surface modification. Actually, the robust thin film served as a scaffold for an Au thin film, which was then bound to various substrates. Surface-texturing of nanodecal was also demonstrated as an application aspects.

A fundamental understanding of catechol and water adsorption on a hydrophilic silica surface: exploring the underwater adhesion mechanism of mussels on an atomic scale

Mussels have a remarkable ability to bond to solid surfaces under water. From a microscopic perspective, the first step of this process is the adsorption of dopa molecules to the solid surface. In fact, it is the catechol part of the dopa molecule that is interacting with the surface. These molecules are able to make reversible bonds to a wide range of materials, even underwater. Previous experimental and theoretical efforts have produced only a limited understanding of the mechanism and quantitative details of the competitive adsorption of catechol and water on hydrophilic silica surfaces. In this work, we uncover the nature of this competitive absorption by atomic scale modeling of water and catechol adsorbed at the geminal (001) silica surface using density functional theory calculations. We find that catechol molecules displace preadsorbed water molecules and bond directly on the silica surface. Using molecular dynamics simulations, we observe this process in detail. We also calculate the interaction force as a function of distance, and observe a maximum of 0.5 nN of attraction. The catechol has a binding energy of 23 kcal/mol onto the silica surface with adsorbed water molecules.

Bioinspired catechol-terminated self-assembled monolayers with enhanced adhesion properties

The role of the catechol moiety in the adhesive properties of mussel proteins and related synthetic materials has been extensively studied in the last years but still remains elusive. Here, a simplified model approach is presented based on a self-assembled monolayer (SAM) of upward-facing catechols thiol-bound to epitaxial gold substrates. The orientation of the catechol moieties is confirmed by spectroscopy, which also showed lack of significant amounts of interfering o-quinones. Local force-distance curves on the SAM measured by atomic force microscopy (AFM) shows an average adhesion force of 45 nN, stronger than that of a reference polydopamine coating, along with higher reproducibility and less statistical dispersion. This is attributed to the superior chemical and topographical homogeneity of the SAM coating. Catechol-terminated SAMs are also obtained on high-roughness gold substrates that show the ability to assemble magnetic nanoparticles, despite their lack of enhanced adhesion at the molecular level. Finally, the influence of the catechol group on the formation and quality of the SAM is explored both theoretically (molecular dynamics simulations) and experimentally using direct-write AFM lithography.

Polydopamine-enabled surface functionalization of gold nanorods for cancer cell-targeted imaging and photothermal therapy

AIM

A novel biomimetic strategy was employed for presenting antibodies on gold nanorods (NRs) to target growth factor receptors on cancer cells for use in photothermal therapy.

MATERIALS & METHODS

Polydopamine (PD) was polymerized onto gold NRs, and EGF receptor antibodies (anti-EGFR) were immobilized onto the layer. Cell-binding affinity and light-activated cell death of cancer cells incubated with anti-EGFR-PD-NRs were quantified by optical imaging.

RESULTS

PD was deposited onto gold NRs, and antibodies were bound to PD-coated NRs. Anti-EGFR-PD-NRs were stable in media, and were specifically bound to EGFR-overexpressing cells. Illumination of cells targeted with anti-EGFR-PD-NRs enhanced cell death compared with nonirradiated controls and cells treated with antibody-free NRs.

CONCLUSION

PD facilitates the surface functionalization of gold NRs with biomolecules, allowing cell targeting and photothermal killing of cancer cells. PD can potentially coat a large variety of nanoparticles with targeting ligands as a strategy for biofunctionalization of diagnostic and therapeutic nanoparticles.

PEGylation of nanosubstrates (titania) with multifunctional reagents: at the crossroads between nanoparticles and nanocomposites

Titania (anatase) nanoparticles were successfully PEGylated through the use of catechol (dopamine)-terminated PEG derivatives. The resulting materials were characterized by excellent stability at neutral pH and extremely low toxicity (phagocytic and nonphagocytic cell lines). In particular, we focused on the comparison between mono- and bis-catechol PEGs. Due to the double terminal anchorage on the titania surface, bis-catechol ligands can produce chains differing from classical monoanchored PEG in conformation (horseshoe-shaped vs brush) and thus the possibility of interactions with biomolecules. At the same time, less than quantitative catechol binding may lead to the presence of dangling chains with unbound catechols which can polymerize and eventually produce PEG/titania nanocomposite colloids. Our results on double-functional PEG2000 show the latter to be the case. Pluronic F127 was also used as a bifunctional ligand, leading to nanocomposite aggregates with an even larger organic content.

Tunable micropatterned substrates based on poly(dopamine) deposition via microcontact printing

A simple technique was developed to fabricate tunable micropatterned substrates based on mussel-inspired surface modification. Polydopamine (PDA) was developed on polydimethylsiloxane (PDMS) stamps and was easily imprinted to several substrates such as glass, silicon, gold, polystyrene, and poly(ethylene glycol) via microcontact printing. The imprinted PDA retained its unique reactivity and could modulate the chemical properties of micropatterns via secondary reactions, which was illustrated in this study. PDA patterns imprinted onto a cytophobic and nonfouling substrates were used to form patterns of cells or proteins. PDA imprints reacted with nucleophilic amines or thiols to conjugate molecules such as poly(ethylene glycol) for creating nonfouling area. Gold nanoparticles were immobilized onto PDA-stamped area. The reductive ability of PDA transformed silver ions to elemental metals as an electroless process of metallization. This facile and economic technique provides a powerful tool for development of a functional patterned substrate for various applications.

Bio-initiated light addressable potentiometric sensor for unlabeled biodetection and its MEDICI simulation

A bio-mimetic anchoring strategy based on L-3,4-dihydroxyphenylalanine (L-DOPA) was exploited to activate the surface of light addressable potentiometric sensor (LAPS), with the structure of Si(3)N(4)/SiO(2)/Si. X-Ray photoelectron spectroscopy (XPS) measurements were carried out to ascertain its existence. The protein's immobilization on L-DOPA-initiated LAPS were also tested by our LAPS system. Then L-DOPA-activated LAPS were applied in the unlabeled rabbit anti-mouse immunoglobulin (IgG) detection. The maximum sensitivity of L-DOPA-activated LAPS to antigen (Ag) is about 5.68 nA/p[Ag]. LAPS responses in IgG measurements were from 95 to 180 nA, when the concentration was varied from 0-4 μg mL(-1). These experiments show that L-DOPA is an available material for LAPS surface modifications. At the same time, simulations based on MEDICI (Synopsys™) were performed. The simulated curves are in accordance with experimental data which demonstrate our theoretical analysis for the experimental phenomenon, and indicate the feasibility of simulating biological electronic devices with MEDICI.

Catechol Redox Induced Formation of Metal Core-Polymer Shell Nanoparticles

A novel strategy was developed to synthesize polymer-coated metal nanoparticles (NPs) through reduction of metal cations with 3,4-dihydroxyphenylalanine (DOPA)-containing polyethylene glycol (PEG) polymers. Catechol redox chemistry was used to both synthesize metal NPs and simultaneously form a cross-linked shell of PEG polymers on their surfaces. DOPA reduced gold and silver cations into neutral metal atoms, producing reactive quinones that covalently cross-linked the PEG molecules around the surface of the NP. Importantly, these PEG-functionalized metal NPs were stable in physiological ionic strengths and under centrifugation, and hold broad appeal since they absorb and scatter light in aqueous solutions.

Dopamine adsorption on anatase TiO2(101): a photoemission and NEXAFS spectroscopy study

The adsorption of dopamine onto an anatase TiO(2)(101) single crystal has been studied using photoemission and NEXAFS techniques. Photoemission results suggest that the dopamine molecule adsorbs on the surface in a bidentate geometry, resulting in the removal of band gap states in the TiO(2) valence band. Using the searchlight effect, carbon K-edge NEXAFS spectra indicate that the phenyl rings in the dopamine molecules are orientated normal to the surface. A combination of experimental and computational results indicates the appearance of new unoccupied states arising following adsorption. The possible role of these states in the charge-transfer mechanism of the dopamine-TiO(2) system is discussed.

Inkjet printing of bioadhesives

Over the past century, synthetic adhesives have largely displaced their natural counterparts in medical applications. However, rising concerns over the environmental and toxicological effects of the solvents, monomers, and additives used in synthetic adhesives have recently led the scientific community to seek natural substitutes. Marine mussel adhesive protein is a formaldehyde-free natural adhesive that demonstrates excellent adhesion to several classes of materials, including glasses, metals, metal oxides, and polymers. In this study, we have demonstrated computer aided design (CAD) patterning of various biological adhesives using piezoelectric inkjet technology. A MEMS-based piezoelectric actuator was used to control the flow of the mussel adhesive protein solution through the ink jet nozzles. Fourier transform infrared spectroscopy (FTIR), microscopy, and adhesion studies were performed to examine the chemical, structural, and functional properties of these patterns, respectively. FTIR revealed the piezoelectric inkjet technology technique to be nondestructive. Atomic force microscopy was used to determine the extent of chelation caused by Fe(III). The adhesive strength in these materials was correlated with the extent of chelation by Fe(III). Piezoelectric inkjet printing of naturally-derived biological adhesives may overcome several problems associated with conventional tissue bonding materials. This technique may significantly improve wound repair in next generation eye repair, fracture fixation, wound closure, and drug delivery devices.

Gold nanorod arrays with good reproducibility for high-performance surface-enhanced Raman scattering

We have attempted to develop surface-enhanced Raman scattering (SERS) substrates by the use of two-dimensional (2D) Au nanorod arrays and to characterize the SERS-active sites of the Au nanostructures. We prepared two different types of 2D Au nanorod arrays by means of the anodic aluminum oxide (AAO) template-assisted nanofabrication. In the template-embedded array (type I) an Au nanorod fills up the AAO pore, while in the annularly spaced array (type II) an Au nanorod keeps approximately 20 nm away from the pore wall. The strongest SERS effect was observed for both types of substrates with an Au nanorod diameter of approximately 66 nm. With respect to the bare AAO template, the NaOH-etched (unetched) type I substrate with the 66 nm Au nanorod showed 115-fold (63-fold) enhancement in Raman scattering, corresponding to a SERS enhancement factor of 10(7)-10(9). For the unetched and ordered Au naonorod arrays, the SERS-active sites localized around the rod end, whereas for the NaOH-etched and partially aggregated Au nanorods, hot spots for SERS were found in the interstices between rod tips. The type II substrate allowed the effect of rod length on the SERS response to be investigated, and the SERS response was observed to vary very little with the rod length increase (250-1000 nm), indicating that majority of the signal originates at the rod end. A comparison between the analytes all-trans-beta-carotene and pyridine suggests that, for both types of substrates, the electromagnetic enhancement is predominant over the chemical enhancement. This work demonstrates that the unetched type I substrate is highly SERS effective, for which the fabrication protocol is advantageous in its simplicity and reproducibility.