Accurate standard hydrogen electrode potential and applications to the redox potentials of vitamin C and NAD/NADH

First and Second Reductions in an Aprotic Solvent: Comparing Computational and Experimental One-Electron Reduction Potentials for 345 Quinones

Using reference reduction potentials of quinones recently measured relative to the saturated calomel electrode (SCE) in N,N-dimethylformamide (DMF), we benchmark absolute one-electron reduction potentials computed for 345 Q/Q•- and 265 Q•-/Q2- half-reactions using adiabatic electron affinities computed with density functional theory and solvation energies computed with four continuum solvation models: IEF-PCM, C-PCM, COSMO, and SM12. Regression analyses indicate a strong linear correlation between experimental and absolute computed Q/Q•- reduction potentials with Pearson's correlation coefficient (r) between 0.95 and 0.96 and the mean absolute error (MAE) relative to the linear fit between 83.29 and 89.51 mV for different solvation methods when the slope of the regression is constrained to 1. The same analysis for Q•-/Q2- gave a linear regression with r between 0.74 and 0.90 and MAE between 95.87 and 144.53 mV, respectively. The y-intercept values obtained from the linear regressions are in good agreement with the range of absolute reduction potentials reported in the literature for the SCE but reveal several sources of systematic error. The y-intercepts from Q•-/Q2- calculations are lower than those from Q/Q•- by around 320-410 mV for IEF-PCM, C-PCM, and SM12 compared to 210 mV for COSMO. Systematic errors also arise between molecules having different ring sizes (benzoquinones, naphthoquinones, and anthraquinones) and different substituents (titratable vs nontitratable). SCF convergence issues were found to be a source of random error that was slightly reduced by directly optimizing the solute structure in the continuum solvent reaction field. While SM12 MAEs were lower than those of the other solvation models for Q/Q•-, SM12 had larger MAEs for Q•-/Q2- pointing to a larger error when describing multiply charged anions in DMF. Altogether, the results highlight the advantages of, and further need for, testing computational methods using a large experimental data set that is not skewed (e.g., having more titratable than nontitratable substituents on different parent groups or vice versa) to help further distinguish between sources of random and systematic errors in the calculations.

Unraveling redox pathways of the disulfide bond in dimethyl disulfide: Ab initio modeling

CONTEXT

In cellular environments, the reduction of disulfide bonds is pivotal for protein folding and synthesis. However, the intricate enzymatic mechanisms governing this process remain poorly understood. This study addresses this gap by investigating a disulfide bridge reduction reaction, serving as a model for comprehending electron and proton transfer in biological systems. Six potential mechanisms for reducing the dimethyl disulfide (DMDS) bridge through electron and proton capture were explored. Thermodynamic and kinetic analyses elucidated the sequence of proton and electron addition. MD-PMM, a method that combines molecular dynamics simulations and quantum-chemical calculations, was employed to compute the redox potential of the mechanism. This research provides valuable insights into the mechanisms and redox potentials involved in disulfide bridge reduction within proteins, offering an understanding of phenomena that are challenging to explore experimentally.

METHODS

All calculations used the Gaussian 09 software package at the MP2/6-311 + g(d,p) theory level. Visualization of the molecular orbitals and electron densities was conducted using Gaussview6. Molecular dynamics simulations were performed using GROMACS with the CHARMM36 force field. The PyMM program (Python Program for QM/MM Simulations Based on the Perturbed Matrix Method) is used to apply the Perturbed Matrix Method to MD simulations.

The role of surface functionalization in quantum dot-based photocatalytic CO2 reduction: balancing efficiency and stability

Photocatalytic CO2 reduction offers a promising strategy to produce hydrocarbons without reliance on fossil fuels. Visible light-absorbing colloidal nanomaterials composed of earth-abundant metals suspended in aqueous media are particularly attractive owing to their low-cost, ease of separation, and highly modifiable surfaces. The current study explores such a system by employing water-soluble ZnSe quantum dots and a Co-based molecular catalyst. Water solubilization of the quantum dots is achieved with either carboxylate (3-mercaptopropionic acid) or ammonium (2-aminoethanethiol) functionalized ligands to produce nanoparticles with either negatively or positively-charged surfaces. Photocatalysis experiments are performed to compare the effectiveness of these two surface functionalization strategies on CO2 reduction and ultrafast spectroscopy is used to reveal the underlying photoexcited charge dynamics. We find that the positively-charged quantum dots can support sub-picosecond electron transfer to the carboxylate-based molecular catalyst and also produce >30% selectivity for CO and >170 mmolCO gZnSe-1. However, aggregation reduces activity in approximately one day. In contrast, the negatively-charged quantum dots exhibit >10 ps electron transfer and substantially lower CO selectivity, but they are colloidally stable for days. These results highlight the importance of the quantum dot-catalyst interaction for CO2 reduction. Furthermore, multi-dentate catalyst molecules create a trade-off between photocatalytic efficiency from strong interactions and deleterious aggregation of quantum dot-catalyst assemblies.

Dithiothreitol reduces oxidative stress and necrosis caused by ultraviolet A radiation in L929 fibroblasts

Ultraviolet A (UVA) radiation, present in sunlight, can induce cell redox imbalance leading to cellular damage and even cell death, compromising skin health. Here, we evaluated the in vitro antioxidant and photochemoprotective effect of dithiothreitol (DTT). DTT neutralized the free radicals 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS·+), 2,2-diphenyl-1-picrylhydrazyl (DPPH·), and superoxide anion (O2·-) in in vitro assays, as well as the ferric ion (Fe3+) in the ferric reducing antioxidant power (FRAP) assay. We also evaluated the effect of DTT pre-treatment in L929 dermal fibroblasts and DTT (50 and 100 µM) led to greater cell viability following UVA-irradiation compared to cells that were untreated. Furthermore, the pre-treatment of cells with DTT prevented the increase of intracellular reactive oxygen species (ROS) production, including hydrogen peroxide (H2O2), lipid peroxidation, and DNA condensation, as well as the decrease in mitochondrial membrane potential (Δψm), that occurred following irradiation in untreated cells. The endogenous antioxidant system of cells was also improved in irradiated cells that were DTT pre-treated compared to the untreated cells, as the activity of the superoxide dismutase (SOD) and catalase (CAT) enzymes remained as high as non-irradiated cells, while the activity levels were depleted in the untreated irradiated cells. Furthermore, DTT reduced necrosis in UVA-irradiated fibroblasts. Together, these results showed that DTT may have promising use in the prevention of skin photoaging and photodamage induced by UVA, as it provided photochemoprotection against the harmful effects of this radiation, reducing oxidative stress and cell death, due mainly to its antioxidant capacity.

Can l-ascorbic acid and trans-resveratrol protect HaCaT cells from fine particulate matter toxicity?

Continuous exposure of human skin to air pollution can result in a range of undesirable skin conditions. In our recent study, UV and visible light were found to increase cytotoxicity of fine particulate matter (PM2.5 ) against human keratinocytes. Since it is impossible to avoid exposure of human skin to PM2.5 , effective strategies are needed to reduce their damaging effects. l-ascorbic acid and resveratrol were tested as potential topical agents against pollution-related skin impairment. Although these agents were previously found to ameliorate PM-dependent damage, the effect of light and seasonal variation of particles were not previously studied. EPR spin-trapping, DPPH assay, and singlet oxygen phosphorescence were used to determine the scavenging activities of the antioxidants. MTT, JC-10 and iodometric assays were used to analyze the effect on PM2.5 -induced cytotoxicity, mitochondrial damage and oxidation of lipids. Live-cell imaging was employed to examine wound-healing properties of cells. Light-induced, PM2.5 -mediated oxidative damage was examined by immunofluorescent staining. Both antioxidants effectively scavenged free radicals and singlet oxygen produced by PM2.5 , reduced cell death and prevented oxidative damage to HaCaT cells. l-ascorbic acid and resveratrol, especially when applied in combination, can protect HaCaT cells against the dark and light induced toxicity of PM2.5 .

Product Metrics for the Manufacturability of Single-Crystal Gold Nanorods via Reaction Engineering

Colloidal gold nanorods (AuNRs) are integral to a diverse array of technologies, ranging from plasmonic imaging, therapeutics, and sensors to large-area coatings, catalysts, filters, and optical attenuators. Different lab-scale strategies are available to fabricate AuNRs with a broad range of physiochemical properties; however, this is achieved at the cost of synthetic robustness and scalability, which limit broad adoption in these technologies. To address this, Product Metrics (Structural Precision, Shape Yield, and Reagent Utilization), measurable with UV-vis-NIR spectroscopy, are defined to evaluate the efficiency of AuNR production. The dependency of these metrics on reaction formulation (reagent concentrations, pH, and T) is established and used to develop a two-step method based on optimizing symmetry breaking of seed particles, followed by the controlled extension of AuNR length and volume. Reagent concentrations and their relative molar ratios with respect to HAuCl4 are adjusted for each step to optimize these adversarial processes. Based on these correlations, we successfully demonstrate the production of highly concentrated AuNRs with targeted volume and aspect ratio while reducing particle impurities and shape dispersity to less than 4 and 10%, respectively, by employing a rationalized formulation that maximizes both product quality and Reagent Utilization. This results in a product density of 1.6 mg/mL, which is 20 times higher than that of conventional literature methods, with commensurate reduction in environmental waste products.

Biomimetic catalysis of nitrite reductase enzyme using copper complexes in chemical and electrochemical reduction of nitrite

Copper nitrite reductase mimetics were synthesized using three new tridentate ligands sharing the same N,N,N motif of coordination. The ligands were based on L-proline modifications, attaching a pyridine and a triazole to the pyrrolidine ring, and differ by a pendant group (R = phenyl, n-butyl and n-propan-1-ol). All complexes coordinate nitrite, as evidenced by cyclic voltammetry, UV-Vis, FTIR and electron paramagnetic resonance (EPR) spectroscopies. The coordination mode of nitrite was assigned by FTIR and EPR as κ2O chelate mode. Upon acidification, EPR experiments indicated a shift from chelate to monodentate κO mode, and 15N NMR experiments of a Zn2+ analogue, suggested that the related Cu(II) nitrous acid complex may be reasonably stable in solution, but in equilibrium with free HONO under non catalytic conditions. Reduction of nitrite to NO was performed both chemically and electrocatalytically, observing the highest catalytic activities for the complex with n-propan-1-ol as pendant group. These results support the hypothesis that a hydrogen bond moiety in the secondary coordination sphere may aid the protonation step.

Selenium vitaminology: The connection between selenium, vitamin C, vitamin E, and ergothioneine

Selenium is connected to three small molecule antioxidant compounds, ascorbate, α-tocopherol, and ergothioneine. Ascorbate and α-tocopherol are true vitamins, while ergothioneine is a "vitamin-like" compound. Here we review how selenium is connected to all three. Selenium and vitamin E work together as a team to prevent lipid peroxidation. Vitamin E quenches lipid hydroperoxyl radicals and the resulting lipid hydroperoxide is then converted to the lipid alcohol by selenocysteine-containing glutathione peroxidase. Ascorbate reduces the resulting α-tocopheroxyl radical in this reaction back to α-tocopherol with concomitant production of the ascorbyl radical. The ascorbyl radical can be reduced back to ascorbate by selenocysteine-containing thioredoxin reductase. Ergothioneine and ascorbate are both water soluble, small molecule reductants that can reduce free radicals and redox-active metals. Thioredoxin reductase can reduce oxidized forms of ergothioneine. While the biological significance of this is not yet realized, this discovery underscores the centrality of selenium to all three antioxidants.

Acidic enol electrooxidation-coupled hydrogen production with ampere-level current density

Hydrogen production coupled with biomass upgrading is vital for future sustainable energy developments. However, most biomass electrooxidation reactions suffer from high working voltage and low current density, which substantially hinder large-scale industrial applications. Herein, we report an acidic hydrogen production system that combined anodic ascorbic acid electrooxidation with cathodic hydrogen evolution. Unlike C-H and O-H bonds cleavage with slow kinetics in conventional organic oxidation, the highly active enol structure in ascorbic acid allows for an ultralow overpotential of only 12 mV@10 mA/cm² using Fe single-atom catalysts, and reaches 1 A/cm² at only 0.75 V (versus reversible hydrogen electrode) with approximately 100% Faraday efficiency for hydrogen production. Furthermore, the fabricated two-electrode membrane-free electrolyser delivers an industrial current density of 2 A/cm²@1.1 V at 60 °C (2.63 kWh/Nm³ H₂), which requires half of the electricity consumption in conventional water electrolysis (~5 kWh/Nm³ H₂). This work provides a new avenue for achieving industrial-scale hydrogen production from biomass.

Regulating electron transportation by tungsten oxide nanocapacitors for enhanced radiation therapy

In the process of radiation therapy (RT), the cytotoxic effects of excited electrons generated from water radiolysis tend to be underestimated due to multiple biochemical factors, particularly the recombination between electrons and hydroxyl radicals (·OH). To take better advantage of radiolytic electrons, we constructed WO₃ nanocapacitors that reversibly charge and discharge electrons to regulate electron transportation and utilization. During radiolysis, WO₃ nanocapacitors could contain the generated electrons that block electron-·OH recombination and contribute to the yield of ·OH at a high level. These contained electrons could be discharged from WO₃ nanocapacitors after radiolysis, resulting in the consumption of cytosolic NAD⁺ and impairment of NAD⁺-dependent DNA repair. Overall, this strategy of nanocapacitor-based radiosensitization improves the radiotherapeutic effects by increasing the utilization of radiolytic electrons and ·OH, warranting further validation in multiple tumour models and preclinical experiments.

Aflatoxin B1 Degradation by Ery4 Laccase: From In Vitro to Contaminated Corn

Aflatoxins (AFs) are toxic secondary metabolites produced by Aspergillus spp. and are found in food and feed as contaminants worldwide. Due to climate change, AFs occurrence is expected to increase also in western Europe. Therefore, to ensure food and feed safety, it is mandatory to develop green technologies for AFs reduction in contaminated matrices. With this regard, enzymatic degradation is an effective and environmentally friendly approach under mild operational conditions and with minor impact on the food and feed matrix. In this work, Ery4 laccase, acetosyringone, ascorbic acid, and dehydroascorbic acid were investigated in vitro, then applied in artificially contaminated corn for AFB₁ reduction. AFB₁ (0.1 µg/mL) was completely removed in vitro and reduced by 26% in corn. Several degradation products were detected in vitro by UHPLC-HRMS and likely corresponded to AFQ₁, epi-AFQ₁, AFB₁-diol, or AFB₁dialehyde, AFB_2a, and AFM₁. Protein content was not altered by the enzymatic treatment, while slightly higher levels of lipid peroxidation and H₂O₂ were detected. Although further studies are needed to improve AFB₁ reduction and reduce the impact of this treatment in corn, the results of this study are promising and suggest that Ery4 laccase can be effectively applied for the reduction in AFB₁ in corn.

GaOOH Crystallite Growth on Liquid Metal Microdroplets in Water: Influence of the Local Environment

Gallium-based liquid metals form alloys with a melting point close to or below room temperature. On the surface of these liquid metals, a thin oxide skin is formed once in contact with oxygen, and this oxide skin can be leveraged to stabilize liquid metal micro- and nanodroplets in a liquid. During sonication and storage of these droplets in aqueous solution, gallium oxide hydroxide (GaOOH) forms on these droplets, and given enough time or treatment with heat, a full shape transition and dealloying are observed. In this article, we show that GaOOH can be grown at room temperature and that the growth is dependent on both the local environment and temperature. GaOOH growth on liquid metal microdroplets located at the air/water interface is considerably faster than in the bulk phase. Interestingly, hydrolysis to GaOOH is hampered and stops at 15 °C in bulk water after 6 h. In contrast, hydrolysis commences even at 15 °C for liquid metal microdroplets located at the air/water interface, and full surface coverage is obtained after around 24 h (compared to 12 h at 25 °C at the air/water interface). The X-ray photoelectron spectroscopy (XPS) measurement suggests that gallium oxide is dissolved and Ga(OH)₃ is formed as a precursor that reacts in a downstream reaction toward GaOOH. This improved understanding of the GaOOH formation can be leveraged to control the liquid metal micro- and nanodroplet shape and composition (i.e., for biomedical applications).

Development of Copper Nanoparticle Conjugated Chitosan Microparticle as a Stable Source of 2nm Copper Nanoparticle Effective against Methicillin- resistant Staphylococcus aureus

BACKGROUND

Copper nanoparticle (CuNP) has well-established antimicrobial activity. Instability in an aqueous medium due to aggregation into larger particles, conversion into metal ions, and oxidation into metal oxides are the major limitations of its practical use against bacterial infections.

OBJECTIVE

Development of CuNP Conjugated Chitosan Microparticles as a reservoir that will release CuNP effective against notorious bacteria like Methicillin-resistant Staphylococcus aureus.

METHODS

CuNP conjugated chitosan microparticles (CNCCM) were synthesized using a simple twostep process. In the first step, a solution of chitosan in 2% (w/v) ascorbic acid was added dropwise in copper sulphate solution to prepare Cu ion conjugated chitosan beads. In the second step, these beads were soaked in sodium hydroxide solution to get the CNCCM. The dried CNCCM were characterized thoroughly for surface conjugation of CuNP, and the release of CuNP in a suitable medium. The physicochemical properties of release CuNP were further verified with the in silico modelled CuNP. The Antimicrobial and antibiofilm activities of released CuNp were evaluated against methicillin-resistant Staphylococcus aureus (MRSA).

RESULTS

2% (w/v) ascorbic acid solution (pH 3.5) was the optimum medium for the release of ~2 nm CuNP from CNCCM. The CuNP had an optical band gap of ~ 2 eV. It inhibited the cell wall synthesis of MRSA. The minimum inhibitory concentration was 200 nM. At 100 nM dose, the CuNP caused ~73% reduction in biofilm development after 24 h of growth. The cytotoxic effect of CuNP on the human cell line (HEK 293) was significantly less than that on MRSA. The 48 h IC₅₀ value against HEK 293 was 3.45-fold higher than the MIC value against MRSA after 24 h treatment.

CONCLUSION

CuNP Conjugated Chitosan Microparticle has been developed. It works as a stable reservoir of ~2 nm CuNP. The CuNP is released in an aqueous medium containing 2% (w/v) ascorbic acid (pH 3.5). The released CuNP has a bacteriostatic effect against MRSA at a concentration safe for human cells.

On the dissociation pathways of copper complexes relevant as PET imaging agents

Several bifunctional chelators have been synthesized in the last years for the development of new ⁶⁴Cu-based PET agents for in vivo imaging. When designing a metal-based PET probe, it is important to achieve high stability and kinetic inertness once the radioisotope is coordinated. Different competitive assays are commonly used to evaluate the possible dissociation mechanisms that may induce Cu(II) release in the body. Among them, acid-assisted dissociation tests or transchelation challenges employing EDTA or SOD are frequently used to evaluate both solution thermodynamics and the kinetic behavior of potential metal-based systems. Despite of this, the Cu(II)/Cu(I) bioreduction pathway that could be promoted by the presence of bioreductants still remains little explored. To fill this gap we present here a detailed spectroscopic study of the kinetic behavior of different macrocyclic Cu(II) complexes. The complexes investigated include the cross-bridge cyclam derivative [Cu(CB-TE1A)]⁺, whose structure was determined using single-crystal X-ray diffraction. The acid-assisted dissociation mechanism was investigated using HClO₄ and HCl to analyse the effect of the counterion on the rate constants. The complexes were selected so that the effects of complex charge and coordination polyhedron could be assessed. Cyclic voltammetry experiments were conducted to investigate whether the reduction to Cu(I) falls within the window of common bioreducing agents. The most striking behavior concerns the [Cu(NO2Th)]²⁺ complex, a 1,4,7-triazacyclononane derivative containing two methylthiazolyl pendant arms. This complex is extremely inert with respect to dissociation following the acid-catalyzed mechanism, but dissociates rather quickly in the presence of a bioreductant like ascorbic acid.

Dealkenylative Alkynylation Using Catalytic FeII and Vitamin C

In this paper, we report the synthesis of alkyl-tethered alkynes through ozone-mediated and FeII-catalyzed dealkenylative alkynylation of unactivated alkenes in the presence of alkynyl sulfones. This one-pot reaction, which employs a combination of a catalytic FeII salt and l-ascorbic acid, proceeds under mild conditions with good efficiency, high stereoselectivity, and broad functional group compatibility. In contrast to our previous FeII-mediated reductive fragmentation of α-methoxyhydroperoxides, the FeII-catalyzed process was devised through a thorough kinetic analysis of the multiple competing radical (redox) pathways. We highlight the potential of this dealkenylative alkynylation through multiple post-synthetic transformations and late-stage diversifications of complex molecules, including natural products and pharmaceuticals.

How to Predict the pK a of Any Compound in Any Solvent

Acid-base properties of molecules in nonaqueous solvents are of critical importance for almost all areas of chemistry. Despite this very high relevance, our knowledge is still mostly limited to the pK _a of rather few compounds in the most common solvents, and a simple yet truly general computational procedure to predict pK _a's of any compound in any solvent is still missing. In this contribution, we describe such a procedure. Our method requires only the experimental pK _a of a reference compound in water and a few standard quantum-chemical calculations. This method is tested through computing the proton solvation energy in 39 solvents and by comparing the pK _a of 142 simple compounds in 12 solvents. Our computations indicate that the method to compute the proton solvation energy is robust with respect to the detailed computational setup and the construction of the solvation model. The unscaled pK _a's computed using an implicit solvation model on the other hand differ significantly from the experimental data. These differences are partly associated with the poor quality of the experimental data and the well-known shortcomings of implicit solvation models. General linear scaling relationships to correct this error are suggested for protic and aprotic media. Using these relationships, the deviations between experiment and computations drop to a level comparable to that observed in water, which highlights the efficiency of our method.

Facile liquid colorimetric sensor using high-density deep eutectic solvent for trace detection and speciation of iron in milk

An efficient colorimetric sensor was developed using a high-density deep eutectic solvent (HD-DES) for the trace detection and speciation of iron in various milk samples. A liquid colorimetric probe was fabricated by dissolving ferrozine (FZ) in HD-DES prepared from TBABr and PBA. The prederivatization of Fe²⁺ via complexation with FZ on the HD-DES/FZ probe provided the [Fe(FZ)₃]^4- complex, which led to a color change from pale yellow to purple before it was simultaneously extracted by HD-DES. The Fe³⁺ content was calculated by subtracting the amount of Fe²⁺ from the total Fe content following the reduction of Fe³⁺ to Fe²⁺ by L-ascorbic acid in an acid buffer. Under the optimized conditions, the proposed colorimetric sensor exhibited appreciable linearity in the concentration range of 0.003-0.04 mg L^-1, a low limit of detection (0.95 µg L^-1), high enrichment factor (50), and outstanding repeatability. The liquid colorimetric probe was successfully applied for the determination and speciation of iron in milk samples, and the results were compared with those obtained using the standard atomic absorption spectrometry method. Moreover, quantitative analysis was performed on a smartphone using the Image J application to estimate the color intensity change, which eliminated the requirement of sophisticated scientific instruments.

Inuloxin A Inhibits Seedling Growth and Affects Redox System of Lycopersicon esculentum Mill. and Lepidium sativum L

Allelochemicals are considered an environment-friendly and promising alternative for weed management, although much effort is still needed for understanding their mode of action and then promoting their use in plant allelopathy management practices. Here, we report that Inuloxin A (InA), an allelochemical isolated from Dittrichia viscosa, inhibited root elongation and growth of seedlings of Lycopersicon esculentum and Lepidium sativum at the highest concentrations tested. InA-induced antioxidant responses in the seedlings were investigated by analysing the contents of glutathione (GSH) and ascorbate (ASC), and their oxidized forms, dehydroascorbate (DHA), and glutathione disulphide (GSSG), as well as the redox state of thiol-containing proteins. An increase in ASC, DHA, and GSH levels at high concentrations of InA, after 3 and 6 days, were observed. Moreover, the ASC/DHA + ASC and GSH/GSSG + GSH ratios showed a shift towards the oxidized form. Our study provides the first insight into how the cell redox system responds and adapts to InA phytotoxicity, providing a framework for further molecular studies.

Theoretical Modeling of Redox Potentials of Biomolecules

The estimation of the redox potentials of biologically relevant systems by means of theoretical-computational approaches still represents a challenge. In fact, the size of these systems typically does not allow a full quantum-mechanical treatment needed to describe electron loss/gain in such a complex environment, where the redox process takes place. Therefore, a number of different theoretical strategies have been developed so far to make the calculation of the redox free energy feasible with current computational resources. In this review, we provide a survey of such theoretical-computational approaches used in this context, highlighting their physical principles and discussing their advantages and limitations. Several examples of these approaches applied to the estimation of the redox potentials of both proteins and nucleic acids are described and critically discussed. Finally, general considerations on the most promising strategies are reported.

Towards Sustainable Oxalic Acid from CO2 and Biomass

To quickly and drastically reduce CO2 emissions and meet our ambitions of a circular future, we need to develop carbon capture and storage (CCS) and carbon capture and utilization (CCU) to deal with the CO2 that we produce. While we have many alternatives to replace fossil feedstocks for energy generation, for materials such as plastics we need carbon. The ultimate circular carbon feedstock would be CO2 . A promising route is the electrochemical reduction of CO2 to formic acid derivatives that can subsequently be converted into oxalic acid. Oxalic acid is a potential new platform chemical for material production as useful monomers such as glycolic acid can be derived from it. This work is part of the European Horizon 2020 project "Ocean" in which all these steps are developed. This Review aims to highlight new developments in oxalic acid production processes with a focus on CO2 -based routes. All available processes are critically assessed and compared on criteria including overall process efficiency and triple bottom line sustainability.

Shape- and Size-Controlled Fabrication of Gold Nano-Urchins via Use of a Mixed Sodium Borohydride and Ascorbic Acid Reductant System

Urchin-shaped gold nanoparticles (AuNUs) are anisotropic nanomaterials with unique chemical and physical properties of interest for a variety of applications. However, synthesizing AuNUs with controlled sizes and shapes remains challenging. We demonstrate that a combination of sodium borohydride (NaBH₄) and ascorbic acid (AA) as reducing agents can produce an aqueous dispersion of AuNUs after just 9 min at room temperature (25 °C). The AuNUs were size- and shape-controlled using a molar ratio for NaBH₄/AA/HAuCl₄ = 1:1:1 at pH 3. The added aurate was almost entirely (98.8%) consumed in the formation of AuNUs. The resultant AuNU concentration was 1.1 × 10¹⁰ particles/mL. The diameters observed in transmission electron microscopy were 145.1 ± 37.4 nm. The AuNUs had an average of 12 spikes and an average volume of 3.7 × 10⁵ nm³. The partition volume between the spikes and the core of particles was 3:2. The AuNUs had a pink color and exhibited an absorption wavelength maximum at 540 nm. It is assumed that the AuNUs originate from icosahedral seeds and urchin shapes emerge from connecting smaller-sized seeds and larger-sized core particles.

Photocontrolled RAFT Polymerization Catalyzed by Conjugated Polymers under Aerobic Aqueous Conditions

Photocontrolled polymerization offers a convenient way to direct the reaction progress and tailor the polymer structures. Nevertheless, conjugated polymers are yet to be utilized as the photocatalyst in associated reactions. Herein, we employed poly(boron dipyrromethene-alt-fluorene) (PBF), a conjugated polymer with better photostability than eosin Y, as the photocatalyst for photo-RAFT polymerizations of acrylic monomers, and the polymers were obtained with moderately narrow molecular weight distributions. The reaction progress was effectively controlled by switching irradiation conditions, and the block copolymers were prepared from chain extension of a macroinitiator. As electron spin resonance (ESR) and optical spectra results suggested, the reductive quenching of PBF* by ascorbate was the key step leading to the reduction of a chain transfer agent (CTA), whereas the hydroxyl radical derived from superoxide was considered as a byproduct of deoxygenation.

Plasma-Functionalized Isotactic Polypropylene Assembled with Conducting Polymers for Bacterial Quantification by NADH Sensing

Rapid detection of bacterial presence on implantable medical devices is essential to prevent biofilm formation, which consists of densely packed bacteria colonies able to withstand antibiotic-mediated killing. In this work, a smart approach is presented to integrate electrochemical sensors for detecting bacterial infections in biomedical implants made of isotactic polypropylene (i-PP) using chemical assembly. The electrochemical detection is based on the capacity of conducting polymers (CPs) to detect extracellular nicotinamide adenine dinucleotide (NADH) released from cellular respiration of bacteria, which allows distinguishing prokaryotic from eukaryotic cells. Oxygen plasma-functionalized free-standing i-PP, coated with a layer (≈1.1 µm in thickness) of CP nanoparticles obtained by oxidative polymerization, is used as working electrode for the anodic polymerization of a second CP layer (≈8.2 µm in thickness), which provides very high electrochemical activity and stability. The resulting layered material, i-PP_f /CP² , detects the electro-oxidation of NADH in physiological media with a sensitivity 417 µA cm^-2 and a detection limit up to 0.14 × 10^-3 m, which is below the concentration of extracellular NADH found for bacterial cultures of biofilm-positive and biofilm-negative strains.

From absolute potentials to a generalized computational standard hydrogen electrode for aqueous and non-aqueous solvents

We describe a simple and efficient procedure to compute a conversion factor for the absolute potential of the standard hydrogen electrode in water to any other solvent. In contrast to earlier methods our procedure only requires the pKa of an arbitrary acid in water and few simple quantum chemical calculations as input. Thus, it is not affected adversely by experimental shortcomings related to measurements in non-aqueous solvents. By combining this conversion factor with the absolute potential in water, the absolute potential in the solvent of interest is obtained. Based on this procedure a new generalized computational standard hydrogen electrode for the computation of electron transfer and proton-coupled electron transfer potentials in non-aqueous solvents and ionic liquids is developed. This enables for the first time the reliable prediction of redox potentials in any solvent. The method is tested through calculation of absolute potentials in 36 solvents. Using the Kamlet-Taft linear solvation energy model we find that the relative absolute potentials consistently increase with decreasing polarisability and decreasing hydrogen bonding ability. For protic solvents good agreement with literature is observed while significant deviations are found for aprotic solvents. The obtained conversion factors are independent of the quantum chemical method, while minor differences are observed between solvation models. This does, however, not affect the global trends.

A photoenhanced oxidation of amino acids and the cross-linking of lysozyme mediated by tetrazolium salts

Tetrazolium salts (TZs) are pervasively utilized as precursors in the dye industry, colorimetric probes in enzyme assays and for exploring nanomaterial toxicity, but its own toxicity is not investigated enough so far. Using femtosecond transient absorption spectroscopy, nanosecond pulse radiolysis (ns-PRL), western blotting and UV-vis absorption spectroscopy, here we characterized a neutral tetrazolinyl radical (with the same maximum absorption at 420 nm and different lifetimes of 5.0 and 9.0 μs for two selected TZs), the key intermediate of TZs reduction, and noticed TZs-formazan production under UV light irradiation accompanied by 41% increase in the cross-linking of lysozyme (Lyso, model protein) compared to TZs-free sample, which uncovered the photoenhanced oxidation of TZs towards Lyso. The ns-PRL in a reductive atmosphere simulated the electron/proton donors of amino acid residues in Lyso upon photoexcitation and revealed the reduction mechanism of TZs, as that first followed one-electron-transfer and then probably proton-coupled electron transfer. This is the first time to report on the photoenhanced oxidation mechanism of TZs, which would provide new insights into the applications of TZs in cell biology, "click" chemistry and nanotoxicology.

Voltage-Switchable Biosensor with Gold Nanoparticles on TiO2 Nanotubes Decorated with CdS Quantum Dots for the Detection of Cholesterol and H2O2

A thin layer of gold nanoparticles (Au NPs) sputtered on cadmium sulfide quantum dots (CdS QDs) decorated anodic titanium dioxide nanotubes (TNTs) (Au/CdS QDs/TNTs) was fabricated and explored for the nonenzymatic detection of cholesterol and hydrogen peroxide (H₂O₂). Morphological studies of the sensor revealed the formation of uniform nanotubes decorated with a homogeneously dispersed CdS QDs and Au NPs layer. The electrochemical measurements showed an enhanced electrocatalytic performance with a fast electron transfer (∼2 s) between the redox centers of each analyte and electrode surface. The hybrid nanostructure (Au/CdS QDs/TNTs) electrode exhibited about a 6-fold increase in sensitivity for both cholesterol (10,790 μA mM^-1 cm^-2) and H₂O₂ (78,833 μA mM^-1 cm^-2) in analyses compared to the pristine samples. The hybrid electrode utilized different operational potentials for both analytes, which may lead to a voltage-switchable dual-analyte biosensor with a higher selectivity. The biosensor also demonstrated a good reproducibility, thermal stability, and increased shelf life. In addition, the clinical significance of the biosensor was tested for cholesterol and H₂O₂ in real blood samples, which showed maximum relative standard deviations of 1.8 and 2.3%, respectively. These results indicate that a Au/CdS QDs/TNTs-based hybrid nanostructure is a promising choice for an enzyme-free biosensor due to its suitable band gap alignment and higher electrocatalytic activities.

Bakalova RB, Semkova S, Zhelev Z. The antimalaria drug artemisinin displays strong cytotoxic effect on leukaemia lymphocytes in combination with vitamin C and pro-vitamin K3

This study investigated the anticancer effect of the anti-parasitic drug artemisinin in combination with two redox modulators: vitamin C and pro-vitamin K3 (C/K3) The experiments were conducted on leukaemia cells Jurkat. Cells were treated with either artemisinin or C/K3 alone and with all three compounds. Cell proliferation and viability were analysed using trypan blue stating and automated cell counting. The results showed that artemisinin (>10 mM) suppressed cell proliferation activity, but did not induce cell death up to 500 mM. The drug demonstrated a clear cytostatic effect at concentrations 250- 500 mM – Jurkat cells did not proliferate, but were alive. The combination C/K3 (200:2, 300:3 mM/mM) applied alone did not affect cell proliferation and viability. Vitamins C/K3 in concentration ratio 500:5 (μM/mM) decreased cell proliferation activity by ~10%. The triple combination artemisinin/C/K3 manifested synergistic anti-proliferative effects at all concentration ratios analysed. This synergistic effect increased with increasing C/K3 concentration. Based on literature data, it was assumed that the anti-proliferative effect of the triple combination was mediated by changes in the redox-homeostasis of cancer cells. The C/K3 redox system likely acted on cancer mitochondria and increased superoxide production and activation of pro-apoptotic signals, specific for cancer cells. On the other hand, artemisinin could generate hydroxyl radicals as a result of activation of Fenton reactions, depleting intracellular reducing equivalents. Both redox mechanisms lead to activation of signal pathways for induction of cancer cell death.

Improving the Stability of EGFR Inhibitor Cobalt(III) Prodrugs

Although tyrosine kinase inhibitors (TKIs) have revolutionized cancer therapy in the past two decades, severe drawbacks such as strong adverse effects and drug resistance limit their clinical application. Prodrugs represent a valuable approach to overcoming these disadvantages by administration of an inactive drug with tumor-specific activation. We have recently shown that hypoxic prodrug activation is a promising strategy for a cobalt(III) complex bearing a TKI of the epidermal growth factor receptor (EGFR). The aim of this study was the optimization of the physicochemical properties and enhancement of the stability of this compound class. Therefore, we synthesized a series of novel derivatives to investigate the influence of the electron-donating properties of methyl substituents at the metal-chelating moiety of the EGFR inhibitor and/or the ancillary acetylacetonate (acac) ligand. To understand the effect of the different methylations on the redox properties, the newly synthesized complexes were analyzed by cyclic voltammetry and their behavior was studied in the presence of natural low-molecular weight reducing agents. Furthermore, it was proven that reduction to cobalt(II) resulted in a lower stability of the complexes and subsequent release of the coordinated TKI ligand. Moreover, the stability of the cobalt(III) prodrugs was investigated in blood serum as well as in cell culture by diverse cell and molecular biological methods. These analyses revealed that the complexes bearing the methylated acac ligand are characterized by distinctly enhanced stability. Finally, the cytotoxic activity of all new compounds was tested in cell culture under normoxic and various hypoxic conditions, and their prodrug nature could be correlated convincingly with the stability data. In summary, the performed chemical modifications resulted in new cobalt(III) prodrugs with strongly improved stabilities together with retained hypoxia-activatable properties.

This study presents the synthesis of improved EGFR inhibitor cobalt(III) prodrugs activatable by hypoxia. By modification of the ancillary ligands, the redox potential could be lowered and the stability of the complexes could be distinctly increased in blood serum. Their physico-chemical properties were in detail characterized, the reductive behavior analyzed by different methods and the biological properties investigated in cancer cells.

Method for the accurate prediction of electron transfer potentials using an effective absolute potential

A protocol for the accurate computation of electron transfer (ET) potentials from ab initio and density functional theory (DFT) calculations is described. The method relies on experimental pKa values, which can be measured accurately, to compute a computational setup dependent effective absolute potential. The effective absolute potentials calculated using this protocol display strong variations between the different computational setups and deviate in several cases significantly from the "generally accepted" value of 4.28 V. The most accurate estimate, obtained from CCSD(T)/aug-ccpvqz, indicates an absolute potential of 4.14 V for the normal hydrogen electrode (nhe) in water. Using the effective absolute potential in combination with CCSD(T) and a moderately sized basis, we are able to predict ET potentials accurately for a test set of small organic molecules (σ = 0.13 V). Similarly we find the effective absolute potential method to perform equally good or better for all considered DFT functionals compared to using one of the literature values for the absolute potential. For, M06-2X, which comprises the most accurate DFT method, standard deviation of 0.18 V is obtained. This improved performance is a result of using the most appropriate effective absolute potential for a given method.

Influence of pH, ionic strength and isoascorbic acid on the gel-forming ability of Jumbo squid muscle (Dosidicus gigas)

The effect of pH and ionic strength (μ) on the extraction capacity of myofibrillar proteins from Jumbo squid mantle muscle along with the addition of isoascorbic acid (IA) in its gel-forming ability (GFA) were evaluated. The results indicate that μ had a greater impact (p < 0.05) than pH on the extraction of muscle myofibrillar proteins. The effectiveness of IA, as the precursor of dehydro-isoascorbic acid (DIA), on the oxidation of sulfhydryl groups (-SH) to disulfide bonds (-SS-) of extracted proteins at 0.6 μ was also evaluated. During the sol-gel transition the -SH groups initially present in the protein system decreased (p < 0.05) due to the combined effect of heat treatment (90 °C/30 min) and the addition of IA; however, the oxidative effect of IA reduced (p < 0.05) the GFA of Jumbo squid muscle proteins. Results also indicated that NaCl at 2.8% rather than at 2.5% during gel preparation significantly (p < 0.05) improves its GFA.

Do Ophthalmic Solutions of Amphotericin B Solubilised in 2-Hydroxypropyl-γ-Cyclodextrins Possess an Extended Physicochemical Stability?

Fungal keratitis is a sight-threatening disease for which amphotericin B eye drops is one of the front-line treatments. Unfortunately, there are currently no commercial forms available, and there is little data concerning the long-term stability of compounded formulations based on intravenous dosages forms. New formulations of amphotericin B ophthalmic solutions solubilised with γ-cyclodextrins have shown promising in-vitro results, but stability data is also lacking. The objective of this study was therefore to investigate the stability of a formulation of ready-to-use amphotericin B solubilised in 2-hydroxypropyl-γ-cyclodextrins (AB-HP-γ-CD), for 350 days. An amphotericin B deoxycholate (ABDC) formulation was used as a comparator. Analyses used were the following: visual inspection, turbidity, osmolality and pH measurements, amphotericin B quantification by a stability-indicating liquid chromatography method, breakdown product research, and sterility assay. AB-HP-γ-CD formulation showed signs of chemical instability (loss of amphotericin B) after 28 and 56 days at 25 °C and 5 °C. Adding an antioxidant (ascorbic acid) to the formulation did not improve stability. ABDC formulation showed signs of physical instability (increased turbidy and amphotericin B precipitation) after 28 days and 168 days at 25 °C and 5 °C. As such, AB-HP-γ-CD formulation does not provide long-term stability for ophthalmic amphotericin B solutions.

Mechanistic insight into hydroxamate transfer reaction mimicking the inhibition of zinc-containing enzymes

A hydroxamate transfer reaction between metal complexes has been investigated by a combination of experimental and theoretical studies. A hydroxamate-bound cobalt(ii) complex bearing a tetradentate macrocyclic ligand, [CoII(TBDAP)(CH3C(-NHO)O)]+ (1), is prepared by the reduction of a hydroximatocobalt(iii) complex with a biological reductant. Alternatively, 1 is accessible via a synthetic route for the reaction between the cobalt(ii) complex and acetohydroxamic acid in the presence of a base. 1 was isolated and characterized by various physicochemical methods, including UV-vis, IR, ESI-MS, and X-ray crystallography. The hydroxamate transfer reactivity of 1 was examined with a zinc complex, which was followed by UV-vis and ESI-MS. Kinetic and activation parameter data suggest that the hydroxamate transfer reaction occurs via a bimolecular mechanism, which is also supported by DFT calculations. Moreover, 1 is able to inhibit the activity against a zinc enzyme, i.e., matrix metalloproteinase-9. Our overall investigations of the hydroxamate transfer using the synthetic model system provide considerable insight into the final step involved in the inhibition of zinc-containing enzymes.

Subcritical Water Extraction of Valuable Metals from Spent Lithium-Ion Batteries

The leaching of valuable metals (Co, Li, and Mn) from spent lithium-ion batteries (LIBs) was studied using subcritical water extraction (SWE). Two types of leaching agents, hydrochloric acid (HCl) and ascorbic acid, were used, and the effects of acid concentration and temperature were investigated. Leaching efficiency of metals increased with increasing acid concentration and temperature. Ascorbic acid performed better than HCl, which was attributed to ascorbic acid’s dual functions as an acidic leaching agent and a reducing agent that facilitates leaching reactions, while HCl mainly provides acidity. The chemical analysis of leaching residue by X-ray photoelectron spectroscopy (XPS) revealed that Co(III) oxide could be totally leached out in ascorbic acid but not in HCl. More than 95% of Co, Li, and Mn were leached out from spent LIBs’ cathode powder by SWE using 0.2 M of ascorbic acid within 30 min at 100 °C, initial pressure of 10 bar, and solid-to-liquid ratio of 10 g/L. The application of SWE with a mild concentration of ascorbic acid at 100 °C could be an alternative process for the recovery of valuable metal in spent LIBs. The process has the advantages of rapid reaction rate and energy efficiency that may benefit development of a circular economy.

Vitamin C versus Cancer: Ascorbic Acid Radical and Impairment of Mitochondrial Respiration?

Vitamin C as a cancer therapy has a controversial history. Much of the controversy arises from the lack of predictive biomarkers for stratification of patients, as well as a clear understanding of the mechanism of action and its multiple targets underlying the anticancer effect. Our review expands the analysis of cancer vulnerabilities for high-dose vitamin C, based on several facts, illustrating the cytotoxic potential of the ascorbyl free radical (AFR) via impairment of mitochondrial respiration and the mechanisms of its elimination in mammals by the membrane-bound NADH:cytochrome b5 oxidoreductase 3 (Cyb5R3). This enzyme catalyzes rapid conversion of AFR to ascorbate, as well as reduction of other redox-active compounds, using NADH as an electron donor. We propose that vitamin C can function in “protective mode” or “destructive mode” affecting cellular homeostasis, depending on the intracellular “steady-state” concentration of AFR and differential expression/activity of Cyb5R3 in cancerous and normal cells. Thus, a specific anticancer effect can be achieved at high doses of vitamin C therapy. The review is intended for a wide audience of readers—from students to specialists in the field.

Vitamin C in Plants: From Functions to Biofortification

Vitamin C (l-ascorbic acid) is an excellent free radical scavenger, not only for its capability to donate reducing equivalents but also for the relative stability of the derived monodehydroascorbate radical. However, vitamin C is not only an antioxidant, since it is also a cofactor for numerous enzymes involved in plant and human metabolism. In humans, vitamin C takes part in various physiological processes, such as iron absorption, collagen synthesis, immune stimulation, and epigenetic regulation. Due to the functional loss of the gene coding for l-gulonolactone oxidase, humans cannot synthesize vitamin C; thus, they principally utilize plant-based foods for their needs. For this reason, increasing the vitamin C content of crops could have helpful effects on human health. To achieve this objective, exhaustive knowledge of the metabolism and functions of vitamin C in plants is needed. In this review, the multiple roles of vitamin C in plant physiology as well as the regulation of its content, through biosynthetic or recycling pathways, are analyzed. Finally, attention is paid to the strategies that have been used to increase the content of vitamin C in crops, emphasizing not only the improvement of nutritional value of the crops but also the acquisition of plant stress resistance.

Synthesis of unsymmetric perylenediimide dye molecule and its photochemical properties on lipid membrane

Optical manipulation of cellular function is one of the important targets in chemical biology and medicine. To achieve manipulation of cellular function using small molecules, photochemical reaction, such as photo-isomerization and photo-induced electron transfer, is one of the most promising reactions. Especially, photo-induced electron transfer process may be the crucial for their further development of photo-functional agents in living cells. However, such molecules, which enable the modification of cellular function, are limited and the further development is necessary. Herein, we synthesized a novel unsymmetric perylenediimide dye and investigated the cellular staining upon the addition in the cell culture medium. Furthermore, we observed the fluorescence quenching upon the addition of ascorbic acid as electron donor and report the preliminary results to manipulate Ca²⁺ concentration in living cell line upon 488-nm light photoirradiation.

CO2 capture and sequestration in stable Ca-oxalate, via Ca-ascorbate promoted green reaction

The increase in the amount of carbon dioxide (CO₂) emissions related to many anthropic activities is a persistent and growing problem. During the last years, many solutions have been set out, none of them being the ultimate one. Investigators agree on the need of a synergic approach to the problem, in terms of many complementary methods of sequestration that, combined with the reduction of production, will be able to decrease the concentration of the CO₂ in the atmosphere. In this work, we explore the use of a green reaction to trap the CO₂ into a stable crystalline phase (weddellite) resorting to a multidisciplinary approach. CO₂ is reduced and precipitated as calcium oxalate through vitamin C as a sacrificial reductant. Calcium oxalate crystals obtained show a startling good quality that increases their already great stability over a wide chemical and physical conditions' range.

Reduction midpoint potentials of bifurcating electron transfer flavoproteins

Recently, a variety of enzymes have been found to accept electrons from NAD(P)H yet reduce lower-potential carriers such as ferredoxin and flavodoxin semiquinone, in apparent violation of thermodynamics. The reaction is favorable overall, however, because these enzymes couple the foregoing endergonic one-electron transfer to exergonic transfer of the other electron from each NAD(P)H, in a process called "flavin-based electron bifurcation." The reduction midpoint potentials (E°s) of the multiple flavins in these enzymes are critical to their mechanisms. We describe methods we have found to be useful for measuring each of the E°s of each of the flavins in bifurcating electron transfer flavoproteins.

High-Pressure Oxidative Leaching and Iodide Leaching Followed by Selective Precipitation for Recovery of Base and Precious Metals from Waste Printed Circuit Boards Ash

: This paper deals with the recovery of gold from waste printed circuit boards (WPCBs) ash by high-pressure oxidative leaching (HPOL) pre-treatment and iodide leaching followed by reduction precipitation. Base metals present in WPCB ash were removed via HPOL using a diluted sulfuric acid solution at elevated temperatures. Effects of potassium iodide concentration, hydrogen peroxide concentration, sulfuric acid concentration, leaching temperature, and leaching time on gold extraction from pure gold chips with KI–H2O2–H2SO4 were investigated. The applicability of the optimized iodide leaching process for the extraction of gold from the leach residue obtained after HPOL were examined at different pulp densities ranging from 50 g/t to 200 g/t. Results show that the removal efficiency was 99% for Cu, 95.7% for Zn, 91% for Ni, 87.3% for Al, 82% for Co, and 70% for Fe under defined conditions. Under the optimal conditions, the percentage of gold extraction from the gold chips and the residue of WPCBs was 99% and 95%, respectively. About 99% of the gold was selectively precipitated from the pregnant leach solution by sequential precipitation with sodium hydroxide and L-ascorbic acid. Finally, more than 93% of gold recovery was achieved from WPCB ash by overall combined processes.

A Density Functional Theory-Based Scheme to Compute the Redox Potential of a Transition Metal Complex: Applications to Heme Compound

We estimated the redox potential of a model heme compound by using the combination of our density functionals with a computational scheme, which corrects the solvation energy to the normal solvent model. Among many density functionals, the LC-BOP12 functional gave the smallest mean absolute error of 0.16 V in the test molecular sets. The application of these methods revealed that the redox potential of a model heme can be controlled within 200 mV by changing the protonation state and even within 20 mV by the flipping of the ligand histidine. In addition, the redox potential depends on the inverse of the dielectric constant, which controls the surroundings. The computational results also imply that a system with a low dielectric constant avoids the charged molecule by controlling either the redox potential or the protonation system.

Nitrogen-doped carbon dots as fluorescence ON-OFF-ON sensor for parallel detection of copper(ii) and mercury(ii) ions in solutions as well as in filter paper-based microfluidic device

Due to improper garbage disposal and rapid industrialization, concentrations of different metal ions are rising to toxic levels in natural water sources. Development of novel, selective and sensitive sensors for different metal ions is in high demand for rapid detection and remediation. Herein, we report nitrogen-doped carbon dots (NCDs) with high blue fluorescence, synthesized by a new one-step pyrolytic method using urea and ethylenediaminetetraacetic (EDTA) acid as precursors. The NCDs were used for parallel detection of Hg²⁺ and Cu²⁺ ions in aqueous medium through a fluorescence ON-OFF-ON process. The minimum detection limit for Hg²⁺ and Cu²⁺ were 6.2 nM and 2.304 nM, respectively, in aqueous medium, which is close to or below the allowed levels of Hg²⁺ and Cu²⁺ ions, i.e., 6 ppb and 2 ppm, respectively, in drinking water as per World Health Organisation (WHO). Hg²⁺ and Cu²⁺ ions were discriminated with vitamin C (ascorbic acid) and trisodium citrate by a fluorescence turn on process. A filter paper based microfluidic device loaded with NCDs, vitamin C and trisodium citrate was developed using candle wax channels on a filter paper as a proof of principle, projecting NCDs as a promising material for parallel detection of multiple metal ions. The device demonstrated herein is capable of detecting Hg²⁺ and Cu²⁺ ions up to 0.1 μM. This simple, low cost, disposable paper-based device will be very useful for rapid onsite analysis.