Degradation of Chlorophenols by Supported Co–Mg–Al Layered Double Hydrotalcite with Bicarbonate Activated Hydrogen Peroxide

A systematic review on percarbonate-based advanced oxidation processes in wastewater remediation: From theoretical understandings to practical applications

Percarbonate encompasses sodium percarbonate (SPC) and composite in-situ generated peroxymonocarbonate (PMC). SPC emerges as a promising alternative to hydrogen peroxide (H2O2), hailed for its superior transportation safety, stability, cost-effectiveness, and eco-friendliness, thereby becoming a staple in advanced oxidation processes for mitigating water pollution. Yet, scholarly literature scarcely explores the deployment of percarbonate-AOPs in eradicating organic contaminants from aquatic systems. Consequently, this review endeavors to demystify the formation mechanisms and challenges associated with reactive oxygen species (ROS) in percarbonate-AOPs, alongside highlighting directions for future inquiry and development. The genesis of ROS encompasses the in situ chemical oxidation of activated SPC (including iron-based activation, discharge plasma, ozone activation, photon activation, and metal-free materials activation) and composite in situ chemical oxidation via PMC (namely, H2O2/NaHCO3/Na2CO3, peroxymonosulfate/NaHCO3/Na2CO3 systems). Moreover, the ROS generated by percarbonate-AOPs, such as •OH, O2•-, CO3•-, HO2•-, 1O2, and HCO4-, can work individually or synergistically to disintegrate target pollutants. Concurrently, this review systematically addresses conceivable obstacles posing percarbonate-AOPs in real-world application from the angle of environmental conditions (pH, temperature, coexisting substances), and potential ecological toxicity. Considering the outlined challenges and advantages, we posit future research directions to amplify the applicability and efficacy of percarbonate-AOPs in tangible settings. It is anticipated that the insights provided in this review will catalyze the progression of percarbonate-AOPs in water purification endeavors and bridge the existing knowledge void.

Activation of H2O2-HCO3- by Ca2Co2O5 for pollutant degradation

The bicarbonate-activated hydrogen peroxide (BAP) system is widely studied for organic pollutant degradation in wastewater treatment. Ca2Co2O5, a heterogeneous catalyst containing multivalent cobalt including Co(II) and Co(III), was herein investigated as a BAP activator, and Acid Orange 7 (AO7) was used as a model pollutant. Ca2Co2O5 exhibited good activation performance. The degradation rate and the initial rate constant of the Ca2Co2O5-activated BAP system were 5.4 and 11.2 times as high as the BAP system, respectively. The removal rate of AO7 reached 90.9% in 30 min under optimal conditions (AO7 20 mg/L, Ca2Co2O5 0.2 g/L, H2O2 1 mM, NaHCO3 5 mM, pH 8.5, 25℃). The Ca2Co2O5 catalyst exhibited good stability and recyclability, retaining 85% of AO7 removal rate in the fifth run. Compared to the BAP system, a lower dosage of H2O2 was required and a higher initial concentration of pollutants allowed for effective degradation in the Ca2Co2O5-BAP system. X-ray photoelectron spectroscopy was used to analyze the catalytic mechanism. The analysis showed that the good catalytic performance of Ca2Co2O5 attributes to its high proportion of oxygen vacancies and Co(III) species, and the presence of Ca. The active species O2•-, •OH, and 1O2 are responsible for the degradation, as indicated by the quenching experiments. The degradation mechanism of AO7 was speculated based on UV-Vis spectral analysis and the identification of degradation intermediates. The azo form, naphthalene and benzoic rings in the AO7 structure are destroyed in the decomposition. This research provides a feasible approach to designing effective and reusable BAP activators for pollutant degradation in wastewater treatment.

A novel cobalt-iron bimetallic hydrochar for the degradation of triclosan in the aqueous solution: performance, reusability, and synergistic degradation mechanism

Low activation performance is a critical issue limiting the practical application of low-cost biochar in the advanced oxidation. Given the high potential of transition metals in the persulfate activation process and abundant oxygen-containing groups of hydrochar, hydrochar derived from cobalt (Co)-modified iron (Fe)-enriched sludge was synthesized and its performance and activation mechanism for the degradation of triclosan were investigated. Co modification significantly altered the morphology of hydrochar, and the increased Co-Fe mass ratios transformed hydrochar from granular to rose-shaped lamellar and then to helical sheet structures. Specific surface area, defect degree, and oxygen-containing groups of hydrochar increased with increasing cobalt-iron mass ratios. The highest removal of triclosan was up to 98% in the hydrochar/peroxymonosulfate (PMS) system under a wide range of pHs (3-10) and still remained higher than 90% after four cycles. Both Radical (mainly hydroxyl radical) and nonradical pathways (singlet oxygen and electron transfer) were evidenced to play roles in the triclosan removal. Fe3+ promoted the regeneration of Co2+ and realized the efficient circulation of Co3+/Co2+. A ternary system consisting of electron donor (triclosan)-electron mediator (hydrochar)-electron acceptor (PMS) provided channels for electron transfer. No measurable Co and Fe were released during the reaction, and the toxicity of degradation intermediates was lower than that of triclosan. Beside triclosan, rhodamine B, bisphenol A, sulfamethoxazole, and phenol were also almost degraded completely in this oxidation system. This study provides a promising way for the enhancement of catalytic activity of carbonaceous material.

The Degradation of Aqueous Oxytetracycline by an O3/CaO2 System in the Presence of HCO3-: Performance, Mechanism, Degradation Pathways, and Toxicity Evaluation

This research constructed a novel O3/CaO2/HCO3- system to degrade antibiotic oxytetracycline (OTC) in water. The results indicated that CaO2 and HCO3- addition could promote OTC degradation in an O3 system. There is an optimal dosage of CaO2 (0.05 g/L) and HCO3- (2.25 mmol/L) that promotes OTC degradation. After 30 min of treatment, approximately 91.5% of the OTC molecules were eliminated in the O3/CaO2/HCO3- system. A higher O3 concentration, alkaline condition, and lower OTC concentration were conducive to OTC decomposition. Active substances including ·OH, 1O2, ·O2-, and ·HCO3- play certain roles in OTC degradation. The production of ·OH followed the order: O3/CaO2/HCO3- > O3/CaO2 > O3. Compared to the sole O3 system, TOC and COD were easier to remove in the O3/CaO2/HCO3- system. Based on DFT and LC-MS, active species dominant in the degradation pathways of OTC were proposed. Then, an evaluation of the toxic changes in intermediates during OTC degradation was carried out. The feasibility of O3/CaO2/HCO3- for the treatment of other substances, such as bisphenol A, tetracycline, and actual wastewater, was investigated. Finally, the energy efficiency of the O3/CaO2/HCO3- system was calculated and compared with other mainstream processes of OTC degradation. The O3/CaO2/HCO3- system may be considered as an efficient and economical approach for antibiotic destruction.

Peroxymonocarbonate activation via Co nanoparticles confined in metal-organic frameworks for efficient antibiotic degradation in different actual water matrices

Traditional advanced oxidation processes suffer from low availability of ultrashort lifetime radicals and declining stability of catalysts. Co nanoparticles in hollow bimetallic metal-organic frameworks (Co@MOFs) were synthesized via a solvothermal method. Nanoconfinement and peroxymonocarbonate (PMC) degradation system endows Co@MOFs with high catalytic activity and stability even in the actual water matrices. The nanocomposites exhibited 100-200 nm polyhedron structure with irregular nanocavity between the 20 nm shell and multicores. Co nanoparticles were completely encapsulated by the FeIII-MOF-5 shell according to the X-ray diffraction and photoelectron spectra. Both 0.8 nm micropores and 3.6 nm mesopores were proven to be present. The yolk-shell Co@MOFs exhibited higher catalytic performance than that of Co nanoparticles, hollow FeIII-MOF-5 and its core-shell counterpart toward PMC activation during sulfamethoxazole degradation. The catalytic activities of Co@MOFs for the activation of unsymmetrical peroxides (PMC and peroxymonosulfate) were much higher than those for the symmetrical peroxides (H2O2 and persulfate) and the heterogeneous catalysis was dominant in the Co@MOFs activated H2O2 and PMC systems. The MOF stability was the highest and metal leakages were the least in the activated PMC system among the four peroxides because of mild reaction conditions and the alkalescent solution (pH = 8.3-8.4). Furthermore, the high removal efficiencies (>94%) and degradation rates could be maintained in the different actual water matrices due to the confinement effects. The contributions of carbonate and hydroxyl radicals were primary for sulfamethoxazole degradation, and superoxide anion and singlet oxygen also played essential roles according to scavenging experiments and time-series spin-trapping electron spin resonance spectra. Six degradation pathways were proposed according to 26 intermediate identification and the pharmacophores of more than 80% intermediates were destroyed, which would benefit subsequent biological treatment. Successful combination of nanoconfinement and PMC might provide a new effective solution for pollution remediation.

Bicarbonate-Hydrogen Peroxide System for Treating Dyeing Wastewater: Degradation of Organic Pollutants and Color Removal

The textile industry is a global economic driving force; however, it is also one of the most polluting industries, with highly toxic effluents which are complex to treat due to the recalcitrant nature of some compounds present in these effluents. This research focuses on the removal of Chemical Oxygen Demand (COD), color, Total Organic Carbon (TOC), and Ammoniacal Nitrogen (N-NH₃) on tannery wastewater treatment through an advanced oxidation process (AOPs) using sodium bicarbonate (NaHCO₃), hydrogen peroxide (H₂O₂) and temperature using a central composite non-factorial design with a surface response using Statistica 7.0 software. All experiments used a 500 mL reactor with 300 mL of tannery wastewater from a company in Cúcuta, Colombia. The physicochemical characterization was done to determine the significant absorbance peaks about the color in the wavelengths between 297 and 669 nm. Statistical analysis found that the concentration of NaHCO₃ affects the removal of color and N-NH₃; however, it did not affect COD and TOC. The optimal process conditions for removing the different compounds under study were: NaHCO₃ 1 M, H₂O₂ 2 M, and 60 °C, with efficiencies of 92.35%, 31.93%, 68.85%, and 35.5% N-NH₃, COD, color, and TOC respectively. It can be concluded that AOPs using H₂O₂ and NaHCO₃ are recommended to remove color and N-NH₃.

Catalytic ozonation for imazapic degradation over kelp-derived biochar: Promotional role of N- and S-based active sites

It is a feasible strategy to prepare reliable biochar catalysts for heterogeneous catalytic ozonation (HCO) processes by using inexpensive, high quality, and easily available raw materials. Here, an environmentally friendly, simple, and green biochar catalyst rich in nitrogen (N) and sulfur (S) has been prepared by the pyrolysis of kelp. Compared with directly carbonized kelp biomass (KB), acid-activated KB (KBA) and base-activated KB (KBB) have higher specific surface areas and more extensive porous structures, although only KBB displays effective ozone activation. Imazapic (IMZC), a refractory organic herbicide, was chosen as the target pollutant, which has apparently not hitherto been investigated in the HCO process. Second-order rate constants (k) for the reactions of IMZC with three different reactive oxygen species (ROS), specifically kO3, IMZC, kOH, IMZC, and k1O2, IMZC, have been determined as 0.974, 2.48 × 109, and 6.23 × 105 M-1 s-1, respectively. The amounts of graphitic N and thiophene S derived from the intrinsic N and S showed good correlations with the IMZC degradation rate, implicating them as the main active sites. OH and O2- and 1O2 were identified as main ROS in heterogeneous catalytic ozonation system for IMZC degradation. This study exemplified the utilization of endogenous N and S in biological carbon, and provided more options for the application of advanced oxidation processes and the development of marine resources.

Peroxymonosulfate activated by composite ceramic membrane for the removal of pharmaceuticals and personal care products (PPCPs) mixture: Insights of catalytic and noncatalytic oxidation

A composite manganese-based catalytic ceramic membrane (Mn-CCM) was developed by a solid-state sintering method, and its effectiveness toward activation of peroxymonosulfate (PMS) for the degradation of 11 pharmaceutical and personal care products (PPCPs) mixture was tested. The optimized Mn-CCMs/PMS system showed remarkable degradation efficiencies for PPCPs mixture with total removal >90% in ultrapure water, river water and natural organic matter (NOM) solution. The Mn-CCMs/PMS system showed the contribution of different phenomena in PPCPs removal in the order of catalytic oxidation (54.7%, Mn-CCMs/PMS) > noncatalytic oxidation (42.3%, PMS oxidation) > adsorption (3.0%, by Mn-CCMs). The singlet oxygen (¹O₂) was the dominant reactive oxygen specie for the degradation of PPCPs in all water matrices proved by the quenching experiments and electro-paramagnetic resonance (EPR) spectroscopy. The extraordinary stability of Mn-CCMs for the activation of PMS has been noted in terms of repeatability experiments for PPCPs degradation with fewer leaching of Mn (1.9 to 3.6 µg/L). Mineralization was achieved in the range of 28-65% for different water matrices. The toxicity of the PPCPs mixture was reduced by 85.9%. The Mn-CCMs/PMS system showed a reduction (25-100%) in precursors of different carbon- and nitrogen-based disinfection by-products. This study found the Mn-CCMs/PMS system as a feasible purification unit for removing trace concentrations of PPCPs (ng/L) in real drinking water matrices.

Bicarbonate enhanced heterogeneous activation of peroxymonosulfate by copper ferrite nanoparticles for the efficient degradation of refractory organic contaminants in water

Nowadays, the treatment of residual refractory organic contaminants (ROCs) is a huge challenge for environmental remediation. In this study, a potential process is provided by copper ferrite catalyst (CuFe₂O₄) activated peroxymonosulfate (PMS, HSO₅^-) in the bicarbonate (HCO₃^-) enhanced system for efficient removal of Acid Orange 7 (AO7), 2,4-dichlorophenol, phenol and methyl orange (MO) in water. The impact of key reaction parameters, water quality components, main reactive oxygen species (ROS), probable degradation mechanism, rational degradation pathways and catalyst stability were systematically investigated. A 95.0% AO7 (C₀ = 100 mg L^-1) removal was achieved at initial pH (pH₀) of 5.9 ± 0.1 (natural pH), CuFe₂O₄ dosage of 0.15 g L^-1, PMS concentration of 0.98 mM, HCO₃^- concentration of 2 mM, and reaction time of 30 min. Both sulfate radical (SO₄^-•) and hydroxyl radical (^•OH) on the surface of catalyst were proved as the predominant radical species through radical quenching experiments and electron paramagnetic resonance (EPR) analysis. The buffer nature of HCO₃^- was partially contributed for the enhanced degradation of AO7 under CuFe₂O₄/PMS/HCO₃^- system. Importantly, according to ¹³C nuclear magnetic resonance (NMR) and EPR analysis, the positive effect of bicarbonate may be mainly attributed to the formation of peroxymonocarbonate (HCO₄^-), which may enhance the generation of ^•OH. The magnetic CuFe₂O₄ particles can be well recycled and the leaching concentration of Cu was acceptable (<1 mg L^-1). Considering the widespread presence of bicarbonate in water environment, this work may provide a safe, efficient, and sustainable technique for the elimination of ROCs from practical complex wastewater.

Nanobionics-Driven Synthesis of Molybdenum Oxide Nanosheets with Tunable Plasmonic Resonances in Visible Light Regions

Nanobionics-driven synthesis offers a process of designing and synthesizing functional materials on a nanoscale based on the structures and functions of biological systems. An approach such as this is environmentally friendly and sustainable, providing a viable option for synthesizing functional nanomaterials for catalysis and nanoelectronic components. In this work, we present a facile and green nanobionics approach to synthesize plasmonic H_xMoO₃ by interacting chloroplasts extracted from spinach with two-dimensional (2D) MoO₃ nanoflakes. The generated plasmon resonances can be modulated in the visible wavelength ranges, and the efficiency to form the plasmonic materials is enhanced by 90% within 45 min of light excitation compared to reactions without chloroplast involvement. Such a characteristic is ascribed to the interfacial carrier dynamics between the two entities in the reactions, in which highly doped metal oxides with quasi-metallic properties can be formed to generate optical absorptions in the visible light region. The green synthesized plasmonic materials show high photocatalytic activities without the coupling of semiconductors, providing a promising nanoelectronics unit, based on the nanobionics-driven synthesized plasmonic materials.

Hydroxyl radical and carbonate radical facilitate chlortetracycline degradation in the bio-photoelectrochemical system with a bioanode and a Bi2O3/CuO photocathode using bicarbonate buffer

The single-chamber bio-photoelectrochemical system (BPES) with a bioanode and a Bi₂O₃/CuO photocathode is developed for chlortetracycline (CTC) degradation under simulated solar irradiation, using phosphate buffer solution (PBS) or NaHCO₃ as buffer solution. The optimized Bi₂O₃/CuO photocathode possesses rich vacancies, great photoresponse capability, and exhibits great photocatalytic activity toward CTC degradation due to its Z-scheme structure. Electron spin-resonance spectroscopy (ESR) and reactive species trapping experiments reveal that superoxide radicals/hydroxyl radicals are both the main radicals contributing to CTC degradation. Moreover, carbonate radical plays a more effective role toward CTC degradation, resulting in 40% improvement for CTC degradation in the BPES within 2 h. Higher current density (maximum of 137.6 A m^-2) and more negative cathode potential are obtained from the illuminated BPES with NaHCO₃ buffer. Possible mechanism and pathways of CTC degradation are proposed. This study contributes to the development of BPESs for antibiotics degradation.

Efficient catalyst prepared from water treatment residuals and industrial glucose using hydrothermal treatment: Preparation, characterization and its catalytic performance for activating peroxymonosulfate to degrade imidacloprid

Water treatment residuals (WTRs), as by-products of drinking water treatment plant, were used as catalyst for persulfate activation to degrade organic pollutants. In this study, G-HWTRs were successfully prepared by hydrothermal treatment, which combined WTRs and a hydrothermal reducing agent (industrial glucose) in different ratios. These materials manifested upgraded performance compared with raw WTRs and HWTRs (prepared only with WTRs under hydrothermal condition) in imidacloprid (IMD) degradation. The elemental composition, structure, morphological and magnetic properties of the G-HWTRs were investigated. And the influences of peroxymonosulfate (PMS) concentration, G-HWTRs dosage, initial pH, water matrix on IMD degradation were determined. The results demonstrated that G-HWTRs-3 had the best catalytic performance, 10 μM IMD was almost completely degraded in the system of G-HWTRs (0.2 g L^-1) and PMS (0.1 mM) within 2 h without pH adjustment. Based on the results of the electron spin-resonance spectroscopy (ESR) tests and radicals scavenging experiments, all of SO₄^-, OH, ¹O₂ and O₂- were the reactive oxygen species driving the IMD degradation, and OH was regarded as the main role of IMD degradation. The possible degradation pathways of IMD were further proposed based on the degradation intermediates that identified by LC-MS. Besides, further experiments indicated G-HWTRs has degradation potential for various pollutants, the degradation rate of atrazine (ATZ), acetochlor (ACE) and simazine (SMX) within 2 h achieved 92.54%, 83.88% and 90.25%, respectively. These results confirmed G-HWTRs has good catalytic performance and activation potential on PMS, providing an effective method for remediating organic polluted wastewater.

Behaviour of ozone in the hybrid ozonation-coagulation (HOC) process for ibuprofen removal: Reaction selectivity and effects on coagulant hydrolysis

Simultaneous ozonation and coagulation can be realized in one unit in the developed hybrid ozonation-coagulation (HOC) process. To reveal the reaction sequence within the HOC process, the ibuprofen (IBP) removal efficiency of the ozonation only, HOC and HOC-PO₄^3- (inhibition of the reactions between ozone and metal coagulant) processes at pH 5 and different ozone dosages were investigated. The removal efficiency is almost the same for the three processes at a low ozone dosage (4.8 mg/L), and higher removal performance can be achieved by the HOC process with increasing ozone dosage. It can be implied that ozone preferentially reacts with OH^- to generate OH which react with IBP in the HOC process, and subsequently reacts with the surface hydroxyl groups of hydrolysed Al species to enhance OH generation. Moreover, based on the kinetics, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) analyses, the synergistic reactions between ozone and the metal coagulants (SOC) started to take effect from ozone dosage of 9.6 mg/L, which further verified that ozone will be involved in the IBP ozonation prior to the SOC reactions. The subsequent SOC reactions also resulted in the increased generation of polymeric Al species and more abundant intermediates in the HOC process.

Minute Cu2+ coupling with HCO3- for efficient degradation of acetaminophen via H2O2 activation

Homogeneous Cu²⁺-mediated activation of H₂O₂ has been widely applied for the removal of organic contaminants, but fairly high dosage of Cu²⁺ is generally required and may cause secondary pollution. In the present study, minute Cu²⁺ (2.5 μM) catalyzed H₂O₂ exhibited excellent efficiency in degradation of organic pollutants with the assistant of naturally occurring level HCO₃^- (1 mM). In a typical case, acetaminophen (ACE) was completely eliminated within 10 min which followed the pseudo-first-order kinetics. Singlet oxygen and superoxide radical rather than traditionally identified hydroxyl radical were the predominant reactive oxygen species (ROS) responsible for ACE degradation. Meanwhile, Cu³⁺ was deduced through Cu⁺ and p-hydroxybenzoic acid formation analysis. CuCO₃(aq) was the main complex with high reactivity for the activation of H₂O₂ to form ROS and Cu³⁺. The removal efficiency of ACE depended on the operating parameters, such as Cu²⁺, HCO₃^- and H₂O₂ dosage, solution initial pH. The presence of Cl^-, HPO₄^2-, humic acid were found to retard ACE removal while other anions such as SO₄^2- and NO₃^- had no obvious effect. ACE exhibited lower degradation efficiency in real water matrices than that in ultra-pure water. Nevertheless, 58-100% of ACE was removed from domestic wastewater, lake water and tap water within 60 min. Moreover, eight intermediate products were identified and the possible degradation pathways of ACE were proposed. Additionally, other typical organic pollutants including bisphenol A, norfloxacin, lomefloxacin hydrochloride and sulfadiazine, exhibited great removal efficiency in the Cu²⁺/H₂O₂/HCO₃^- system.

Catalytic ozonation for metoprolol and ibuprofen removal over different MnO2 nanocrystals: Efficiency, transformation and mechanism

Manganese dioxide has been widely recognized as catalyst in catalytic ozonation for organic pollutants removal from wastewater in recent decades. However, few studies focus on the structure-activity relationship of MnO₂ and catalytic ozonation mechanism in water. In the present study, the oxidative reactivity of three different crystal phases of MnO₂ corresponding to α-MnO₂, β-MnO₂ and γ-MnO₂ towards metoprolol (MET) and ibuprofen (IBU) were evaluated. α-MnO₂ was found to contain the most abundant oxygen vacancy and readily reducible surface adsorbed oxygen (O^2-, O^-, OH^-), which facilitated an increase of ozone utilization and the highest catalytic performance with 99% degradation efficiency for IBU and MET. α-MnO₂ was then selected to investigate the optimum key operating parameters with a result of catalyst dosage 0.1 g/L, ozone dosage 1 mg/min and an initial pH 7. The introduction of α-MnO₂ promoted reactive oxygen species (O^2-, O^-, OH^-) generation which played significant roles in IBU degradation. Probable degradation pathways of MET and IBU were proposed according to the organic intermediates identified and the reaction sites based on density function theory (DFT) calculations. The present study deepened our understanding on the MnO₂ catalyzed ozonation and provided reference to enhance the process efficiency.

Degradation of Rhodamine B by activation of peroxymonosulfate using Co3O4-rice husk ash composites

Rice husk is an agricultural residue in rice producing process with a worldwide annual output of more than 190 million tons. To investigate the possibility of disposal method, rice husk ash (RHA) derived from the rice husk residue was treated as a support material thus synthesizing a Co-based heterogeneous catalyst for peroxymonosulfate activation. The interconnected architecture of the Co₃O₄ nanoflakes grown vertically on the surface of RHA provided high surface area and structure stability. The as-synthesized heterogeneous catalyst exhibited enhanced ability for peroxymonosulfate activation towards Rhodamine B degradation. Degradation efficiency of Rhodamine B achieved 96.3% within 60 min by using Co₃O₄-0.5 RHA catalyst, while only 44.1% Rhodamine B was degraded for bare Co₃O₄. The effects of pH, catalyst dosage, peroxymonosulfate dosage, Rhodamine B concentration, inorganic ions and temperature were evaluated. Radical scavenging experiments revealed that ¹O₂ and O₂^•- other than SO₄^•- and •OH were the main active species. Furthermore, the addition of rice husk ash proved to be capable of reducing the dissolution of Co and extended the lifetime of the catalyst. This study elucidated a new opportunity for both utilizing agricultural residue and reducing contaminants in wastewater.

A Comprehensive Assessment of Catalytic Performances of Mn2O3 Nanoparticles for Peroxymonosulfate Activation during Bisphenol A Degradation

Catalytic performances of Mn2O3 nanoparticles for peroxymonosulfate (PMS) activation in bisphenol A (BPA) degradation were comprehensively investigated in this study. Experimental results showed that 10 mg/L BPA could be 100% degraded within 20 min with the dosages of 0.2 g/L Mn2O3 and 0.1 mM PMS. Moreover, Mn2O3 showed remarkable activity in activation of PMS and excellent adaptability in various real water matrices, including river water, tap water and secondary effluents. Based on the radical detection and scavenging experiments, it was found that both radical and non-radical oxidation contributed to the degradation of BPA and 1O2 was the dominant species in the degradation compared to •OH, SO4•− and O2•−. A total of 15 transformation products were identified by LC/MS-MS during BPA degradation in the Mn2O3/PMS system, and degradation pathways via three routes are proposed. Compared with lab-made catalysts reported in the literature, the Mn2O3 catalyst demonstrated its superiority in terms of its high TOC removal, low PMS consumption and fast degradation rate for BPA.

Application of percarbonate and peroxymonocarbonate in decontamination technologies

Sodium percarbonate (SPC) and peroxymonocarbonate (PMC) have been widely used in modified Fenton reactions because of their multiple superior features, such as a wide pH range and environmental friendliness. This broad review is intended to provide the fundamental information, status and progress of SPC and PMC based decontamination technologies according to the peer-reviewed papers in the last two decades. Both SPC and PMC can directly decompose various pollutants. The degradation efficiency will be enhanced and the target contaminants will be expanded after the activation of SPC and PMC. The most commonly used catalysts for SPC activation are iron compounds while cobalt compositions are applied to activate PMC in homogenous and heterogeneous catalytical systems. The generation and participation of hydroxyl, superoxide and/or carbonate radicals are involved in the activated SPC and PMC system. The reductive radicals, such as carbon dioxide and hydroxyethyl radicals, can be generated when formic acid or methanol is added in the Fe(II)/SPC system, which can reduce target contaminants. SPC can also be activated by energy, tetraacetylethylenediamine, ozone and buffered alkaline to generate different reactive radicals for pollutant decomposition. The SPC and activated SPC have been assessed for application in-situ chemical oxidation and sludge dewatering treatment. The challenges and prospects of SPC and PMC based decontamination technologies are also addressed in the last section.

Heterogeneous Fenton Degradation of Organic Pollutants in Water Enhanced by Combining Iron-type Layered Double Hydroxide and Sulfate

Water pollution derived from organic pollutants is one of the global environmental problems. The Fenton reaction using Fe²⁺ as a homogeneous catalyst has been known as one of clean methods for oxidative degradation of organic pollutants. Here, a layered double hydroxide (Fe²⁺ Al³⁺ -LDH) containing Fe²⁺ and Al³⁺ in the structure was used to develop a "heterogeneous" Fenton catalyst capable of mineralizing organic pollutants. We found that sulfate ion (SO₄ ^2- ) immobilized on the Fe²⁺ Al³⁺ -LDH significantly facilitated oxidative degradation (mineralization) of phenol as a model compound of water pollutants to carbon dioxide (CO₂ ) in a heterogeneous Fenton process. The phenol conversion and mineralization efficiency to CO₂ reached >99% and ca. 50%, respectively, even with a reaction time of only 60 min.

Unveiling the exceptional synergism-induced design of Co-Mg-Al layered triple hydroxides (LTHs) for boosting catalytic activity toward the green synthesis of indol-3-yl derivatives under mild conditions

The current study provides a novel insight into the role of synergism of the changes in Mg²⁺/ Al³⁺ in the best catalytic activity of indol-3-yl derivatives. A series of Co-Mg-Al layered triple hydroxides (LTHs) catalysts were produced by altering the Al³⁺/Mg²⁺ ratio with respect to Co²⁺. The physicochemical properties of LTHs were well characterized by ICP-AES, XRD, FTIR, FE-SEM, BET, Zeta-sizer, and VSM. The results show that the sample CMA4 (Co²⁺:Mg²⁺:Al³⁺ 2:4:4) is an exception to the physicochemical characteristics of the produced Co-Mg-Al LTHs, which is due to the synergism between the changes in Mg²⁺ and Al³⁺. To the best of our knowledge, this is the first study to report the synthesis of indol-3-yl derivatives from indole-3-carbaldehyde using Co-Mg-Al LTHs as highly efficient heterogeneous catalysts, which is an extremely appealing path. The selectivity of the synthesis was studied by condensing various nucleophiles through the one-pot method that established superior reactivity under mild conditions. Notably, the results show that the Co-Mg-Al LTHs system exhibited an extraordinarily catalytic activity, with the highest yield (98%) being obtained under the following optimal conditions: the concentration of Co-Mg-Al LTHs = 5 mol%, 30 min., water/ethanol as solvent. Furthermore, the reusable studies exhibited that the catalysts were found to be stable and reusable for up to six cycles without substantial loss of catalytic activity. Finally, a plausible reaction mechanism of the Co-Mg-Al LTHs system for indol-3-yl derivatives was put forward according to our comprehensive analysis. Our work illuminates a cheap and flexible strategy for the synthesis of indol-3-yl derivatives using Co-Mg-Al LTHs.

Catalytic oxidation of sulfachloropyridazine by MnO2: Effects of crystalline phase and peroxide oxidants

Catalytic activation of different oxidants including peroxymonosulfate (PMS), peroxydisulfate (PDS), hydrogen peroxide (H₂O₂) and ozone (O₃) by MnO₂ for degradation of sulfachloropyridazine (SCP) was investigated and the effects of different crystalline phases of MnO₂ including nanowire α-MnO₂, nanorod β-MnO₂, nanofiber γ-MnO₂, and nanosphere δ-MnO₂ on catalytic ozonation of SCP were also studied. The SCP degradation and total organic carbon removal indicated that the oxidation efficiency of the peroxide oxidants followed an order of O₃/MnO₂ > PMS/MnO₂ > PDS/MnO₂ > H₂O₂/MnO₂. In catalytic ozonation, SCP degradation rate constants of different MnO₂ phases followed an order of δ-MnO₂ > α-MnO₂ > γ-MnO₂> β-MnO₂. Electron paramagnetic resonance (EPR) suggested that hydroxyl radicals (·OH) and singlet oxygen (¹O₂) might be more significant for SCP degradation than sulfate (SO₄^·-) and superoxide (·O₂^-) radicals. Radical competition experiments demonstrated that ¹O₂ and ·OH contributed to 63.16% and 28.07%, respectively, for the catalytic ozonation of SCP. It was also found that more oxygen vacancies, specific surface area and exposure of MnO₆ edges could facilitate the activation of O₃ for ¹O₂ and ·OH productions and SCP degradation. The degradation pathways of SCP could mainly follow the cleavage of S-C or S-N bond and dechlorination, accompanied by hydroxylation and oxidation.

Tuning the structural properties of cadmium-aluminum layered double hydroxide for enhanced photocatalytic dye degradation

The distinctive layered structure, chemical stability and tunability of layered double hydroxides (LDHs) have led to extensive investigations in various areas of photocatalysis, including photocatalytic water splitting, carbon dioxide photoreduction, and degradation of organic pollutants. Here, a series of visible light active cadmium-aluminum layered double hydroxides (CdAl LDHs) with various Cd²⁺ : Al³⁺ ratios is synthesized via the reaction-diffusion framework (RDF) leading thereby to a hierarchal spherical structure of the LDH. The aim of this study is to develop an optimal CdAl LDH photocatalyst that is activated by solar light irradiation and tested for methylene blue (MB) degradation. The structural and physicochemical properties of the synthesized materials are determined by several imaging and spectroscopic techniques. The photocatalytic study reveals a strong dependence of the photocatalytic activity of the CdAl LDH on the cationic ratio with an optimal performance at a ratio Cd²⁺ : Al³⁺ equal to 3 : 1. A mechanism is proposed whereby the activity is ascribed to the formation of intermediate reactive oxidative species (ROS) during the photodegradation reactions and scrutinised by invoking different ROS quenchers and corroborated by density functional theory (DFT) calculations.

Sonophotocatalytic activities of FeCuMg and CrCuMg LDHs: Influencing factors, antibacterial effects, and intermediate determination

Herein, FeCuMg and CrCuMg layered double hydroxides (LDHs) were synthesized and their sonophotocatalytic activities toward Acid blue 113 (AB113) were compared. Sonolysis alone (only ultrasound) led to the decolorization efficiency of 13.0 %. A similar result was obtained in the case of the utilization of photolysis alone using a 10-W LED lamp (13.5 %). The adsorption process of AB113 onto both compounds was not efficient to significantly remove the target contaminant. The bandgap energy of 2.54 eV and 2.41 eV was calculated for FeCuMg and CrCuMg LDHs, respectively, indicating relatively higher photocatalytic activity of Cr-incorporated LDH than FeCuMg LDH. The sonophotocatalysis of AB113 (50 mg L^-1) over CrCuMg LDH (81.1 %) was more efficient than that of FeCuMg LDH (57.3 %) within the reaction time of 60 min. Intermediate byproducts of the sonophotocatalytic decomposition of organic dye over the as-synthesized tri-metal layered sonophotocatalysts were also identified. Furthermore, the antibacterial activity of both LDHs was evaluated by the CFU technique and the MBC and MIC values were determined. The antibacterial assessment confirmed the higher antibacterial activity of CrCuMg LDH than that of FeCuMg LDH against Staphylococcus aureus (S. aureus).

Non-radical PMS activation by the nanohybrid material with periodic confinement of reduced graphene oxide (rGO) and Cu hydroxides

A new strategy was applied by periodic stacking of active sites of Cu and reduced graphene oxide (rGO) in the form of Cu-rGO LDH nanohybrid material. The experimental results revealed that newly prepared Cu-rGO LDH nanohybrid material was extremely reactive in PMS activation as evident from the degradation rate of 0.115 min^-1, much higher than Mn-rGO LDH (0.071 min^-1), Zn-rGO LDH (0.023 min^-1) or other benchmarked material used during the degradation of bisphenol A (BPA). This excellent activity of Cu-rGO LDH nanohybrid was attributed to the better PMS utilization efficiency as compared to the other catalysts. Additionally, the characterization techniques disclosed that the layer by layer arrangement of active sites in the Cu-rGO LDH catalyst promotes interfacial electron mobility owing to the synergistic association between Cu in LDH and interlayered rGO. Based on the in-situ electron paramagnetic resonance spectroscopy (EPR) and chemical scavengers, singlet oxygen (¹O₂) was unveiled as dominant reactive species for pollutant removal, resulting from the recombination of superoxides (O₂^-) or reduction of active Cu centers. We believe that this novel Cu-rGO LDH/PMS system will open up a new avenue to design efficient metal-carbon nanohybrid catalysts for the degradation of emerging aquatic pollutants in a real application.

Reactive Oxygen Species and Catalytic Active Sites in Heterogeneous Catalytic Ozonation for Water Purification

Heterogeneous catalytic ozonation (HCO) processes have been widely studied for water purification. The reaction mechanisms of these processes are very complicated because of the simultaneous involvement of gas, solid, and liquid phases. Although typical reaction mechanisms have been established for HCO, some of them are only appropriate for specific systems. The divergence and deficiency in mechanisms hinders the development of novel active catalysts. This critical review compares the various existing mechanisms and categorizes the catalytic oxidation of HCO into radical-based oxidation and nonradical oxidation processes with an in-depth discussion. The catalytic active sites and adsorption behaviors of O₃ molecules on the catalyst surface are regarded as the key clues for further elucidating the O₃ activation processes, evolution of reactive oxygen species (ROS) or organic oxidation pathways. Moreover, the detection methods of the ROS produced in both types of oxidations and their roles in the destruction of organics are reviewed with discussion of some specific problems among them, including the scavengers selection, experiment results analysis as well as some questionable conclusions. Finally, alternative strategies for the systematic investigation of the HCO mechanism and the prospects for future studies are envisaged.

Cobalt-based layered double hydroxides revisited: evidence for oxidizing radical generation

Layered double hydroxides (LDHs) containing transition metal elements such as cobalt show interesting reactivity related to the complexity of cobalt chemistry.

Activation of sodium percarbonate by vanadium for the degradation of aniline in water: Mechanism and identification of reactive species

Sodium percarbonate (SPC)-based advanced oxidation process has been applied to the wastewater treatment in recent years. In the present study, a novel catalyst utilization of vanadium(V) was investigated for the activation of SPC for aniline degradation. The mechanism of SPC activation by V(IV) was demonstrated, and the major free radicals were identified through scavenging tests and electron paramagnetic resonance (EPR) analysis. The performance of aniline degradation was evaluated in the V(IV)/H₂O₂ and V(IV)/H₂O₂/Na₂CO₃ systems and compared with that of the V(IV)/SPC system. The influences of initial pH and effects of inorganic anions were also studied. The results show that aniline could be decomposed efficiently by SPC activated with V(IV) and the degradation efficiency increased with the increase in V(IV) and SPC dosage. O₂^-, CO₃^-, and OH were found to participate in aniline degradation, and O₂^- and CO₃^- were confirmed to be the predominant species. The decomposition of aniline was enhanced when equal amount of H₂O₂ was utilized instead of SPC under acidic condition while a comparative behavior was achieved in the V(IV)/H₂O₂/Na₂CO₃ system. Furthermore, aniline degradation was not impacted significantly by the initial pH and addition of Cl^-, SO₄^2- and NO₃^-, while HCO₃^- led to a betterment of aniline removal. These results indicate that the V(IV)/SPC system is an effective and promising approach for the removal of aniline from water for its feasibility and stability, which achieves eliminating contaminants by another waste.

A review on electrochemical biosensing platform based on layered double hydroxides for small molecule biomarkers determination

The development of layered double hydroxides (LDHs), also known as anionic clays with uniform distribution of metal ions and facile exchangeability of intercalated anions, are now appealing an immense deal of attention in synthesis of multifunctional materials. In electrochemical biosensors, LDHs provide stable environment for immobilization of enzymes or other sensing materials and play crucial roles in development of clinical chemistry, point-of-care devices through analysis of various small molecule metabolites excreted by biological processes which in turn serve as molecular biomarkers for medical diagnostics. In this review, we summarize the recent development in fabrication of LDH based nanoarchitectures and their electrocatalytic applications in ultrasensitive in vitro determination of conventional biomarkers, i.e., H₂O₂, glucose, dopamine and other biomolecules. Moreover, detailed discussion has been compiled to differentiate electrochemical enzymatic and nonenzymatic biosensors, to evaluate useful concentration ranges of H₂O₂ and glucose for analytical circumstances and to distinguish tumorigenic and normal cells via quantifying the released H₂O₂ efflux from living cells. Here, we envision that electrochemical sensing platform based on structurally integrated LDH nanohybrids with highly conducting substrates will assist as diseases diagnostic probe further enhancing diagnosis as well as therapeutic window for chronic diseases. Finally, the perspective for fabrication and assembly of LDH electrode is proposed for the future innovation of electrochemical biosensors with high performance making them more reliable for in vitro diagnostics.

Pd based in situ AOPs with heterogeneous catalyst of FeMgAl layered double hydrotalcite for the degradation of bisphenol A and landfill leachate through multiple pathways

In situ degradation of organic contaminants by Pd and electro-generated H₂ and O₂ overcomes the drawbacks to traditional Fenton process, and conducting heterogeneous catalyst of FeMgAl layered double hydrotalcite (LDH) further improved the efficiency and stability. Using bisphenol A (BPA) as the model contaminants, 90% removal can be achieved with 1200 mg/L Pd/Al₂O₃ and FeMgAl-2. The reusability was satisfying due to the very limited leaching of Fe ions at 0.1 ppm level. FeMgAl also amplified the window of pH for Pd-catalyzed in situ advanced oxidation processes (AOPs) from 3 by homogenous Fe(II) to 3-7 by FeMgAl LDH. The COD of landfill leachate effluent of the MBR system removed by about 52.3% by this system by the initial pH was 5. Characterizations revealed the distinguishing features associated with LDH structure such as large surface area, good stability, basic character, and strong linage among active sites were accounted for the remarkable performances over a wide pH window. Five reactive intermediates were observed and multiple degradation pathways were proposed in Pd-catalyzed in situ AOP for the first time. Interestingly, because of the unique role of Pd catalyst, these degradation pathways were clearly distinguished from traditional Fenton or Fenton-like AOPs and may provide a new approach of in situ heterogeneous AOPs for refractory contaminants in future.

Ozonation of aqueous phenol catalyzed by biochar produced from sludge obtained in the treatment of coking wastewater

Sludge collected from industrial wastewater treatment possesses a threatening effect on environment, and changing it into functional material provides an alternative for its disposal. Biochar synthesized by pyrolysis of sludge obtained from coking wastewater treatment was evaluated for the catalytic ozonation of phenol in aqueous solution. The present work focused on testing the catalytic performance of biochar, deducing the kinetics of phenol removal in various reaction conditions, and finally elucidating the mechanism of biochar-enhanced phenol removal. The results demonstrated that biochars produced at pyrolysis temperatures of 700 and 900 °C revealed highly comparable catalytic activity in phenol ozonation, leading to around 95% phenol removal within 30 min reaction, due to the abundant carbonyl groups on biochar surface. The biochar, however, was suffered from poor stability, which was attributed to biochar loss and changes in surface chemistry. On the basis of examining reaction variables, an empirical kinetic model was developed well matching experimental results. It was found that ozone concentration adsorbed on biochar surface was first increased with a peak (3.8 mg/L for biochar obtained at 700 °C) at reaction time 10 min, after which it decreased along with proceeding reaction. In light of radical scavenging test, superoxide radical (O₂-) was identified as main radical species produced from the interaction of ozone with biochar surface, while hydroxyl radical (OH) played negligible role in biochar catalytic ozonation. The promoting mechanism of bicarbonate on phenol ozonation was verified to be the generation of O₂- via series reactions of HCO₃- with OH and ozone, apart from increase in solution pH. These results provide important implications for future recycling of coking wastewater treatment sludge in environmental remediation.

Enhanced degradation of isoproturon in soil through persulfate activation by Fe-based layered double hydroxide: different reactive species comparing with activation by homogenous Fe(II)

Phenylurea herbicide residuals in soil may continuously contaminate surface water and groundwater due to unregulated and improper use. Herein, we reported a stable and active oxidation system including heterogeneous Fe-based layered double hydroxide materials as persulfate (PS) activators. Under mild conditions, 1% LDH in weight and 70 mM PS can completely degrade 500 mg/kg isoproturon in soil within 10 h, during which less than 0.1 ppm heavy metal leaching was detected. This remarkable performance was consistent in a broad pH range (3~11) and was resistant to various inorganic anions (Cl^-, Br^-, NO₃^-, HCO₃^-) and humic acid. Mechanism studies from scavenging tests, EPR, and fluorescence spectra collectively proved that besides •OH and •SO₄^-, singlet oxygen (¹O₂) and superoxide (•O₂^-) were also generated and were accounted for the oxidative degradation. This unique mechanism of generating diverse radicals was clearly distinguished from classic Fe(II)/PS system, significantly reduced the influence of varying parameters in water and soil matrix, and was suggestive to chemical oxidation system in soil remediation to avoid scavenging effects by background electrolytes or other components in water/soil matrix. Graphical abstract ᅟ.

Multipath fabrication of hierarchical CuAl layered double hydroxide/carbon fiber composites for the degradation of ammonia nitrogen

In this work, a series of flower-like CuAl layered double hydroxides (LDHs) and hierarchical CuAl/carbon fiber-LDH (CuAl/CF-LDH) materials were synthesized, and these materials were used as catalysts for the degradation of ammonia nitrogen from simulated wastewater. The morphologies and structures of the materials were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy (RS), X-ray diffraction (XRD), and the Brunauer-Emmett-Teller (BET) technique. The effects of the catalyst and H₂O₂ loading dosages, reaction temperature, pH, Cu/Al ratio of the samples, and contact time on the degradation process were investigated by degrading ammonia nitrogen under different conditions, and the possible degradation mechanism was discussed. CuAl/CF-LDH exhibited more effectively catalytically degradation of ammonia nitrogen than others as-prepared samples, and removal efficiency reached 99.7% under the optimized conditions. The reusing capability and stability of the materials were studied. Meanwhile, the versatility of the materials was investigated by testing their performance in the absorption of azo dye, the highest removal efficiency was found to be 99.28%. The prepared materials are promising for use as effective catalysts for the degradation of ammonia nitrogen from wastewater.

Carbonate-activated hydrogen peroxide oxidation process for azo dye decolorization: Process, kinetics, and mechanisms

Advanced oxidation processes offer effective solutions in treating wastewater from various industries. This study is the first time to investigate the potential of carbonate-activated hydrogen peroxide (CAP) oxidation process for the removal of organic pollutant from highly alkaline wastewaters. Azo dye acid orange 7 (AO7) was selected as a model pollutant. The influences of various parameters on AO7 decolorization by the CAP oxidation were evaluated. Furthermore, the active species involved in AO7 degradation were explored using scavenger experiments and electron spin resonance analysis. Additionally, AO7 degradation products by the CAP oxidation were identified to elucidate possible transformation pathways. Results showed that the CAP oxidation had better AO7 decolorization performance compared to bicarbonate-activated hydrogen peroxide method. The AO7 decolorization efficiency augmented from 3.70 ± 0.76% to 54.27 ± 2.65% when carbonate concentration was increased from 0 to 50 mM at pH 13.0, and then changed slightly with further increasing carbonate concentration to 70 mM. It increased almost linearly from 5.95 ± 0.32% to 94.03 ± 0.39% as H₂O₂ concentration was increased from 5 to 50 mM. Moreover, trace amount of Co(II) could facilitate AO7 decolorization by the CAP reaction. Superoxide and carbonate radicals might be the main reactive oxygen species involved in the CAP process. Finally, a possible degradation pathway of AO7 by the CAP oxidation was proposed based on the identified products.

Treatment of refractory contaminants by sludge-derived biochar/persulfate system via both adsorption and advanced oxidation process

A novel strategy for the removal of refractory organic contaminants was realized through sludge-derived biochar (SDBC)/persulfate (PS) system via both adsorption and advanced oxidation process under ambient conditions. SDBC was prepared by one single step of slow pyrolysis of municipal sewage sludge, appeared a porous structure, and contained abundant oxygen-containing functional groups as well as amorphous Fe species. Large surface area and porous structure of SDBC benefitted the adsorption and enrichment of contaminants, while oxygen-containing functional groups and Fe species on the surface were considered as reactive components for the activation of PS. Under conditions of [PS]₀ = 1.85 mM, [4-chlorophenol]₀ = 0.039 mM, [SDBC]₀ = 1 g L^-1, pH₀ = 6.30 and temperature = 25 °C, the removal of model compound of 4-chlorophenol achieved 92.3%, and this significant performance of SDBC/PS system was consistent in a broad pH window. Radical scavengers and electron paramagnetic resonance (EPR) studies suggested that SDBC successfully activated PS to produce various oxidative radicals. Meanwhile, recycle experiments and Fe³⁺ leaching tests further demonstrated the stability of SDBC during the activation of PS. Municipal landfill leachate effluent through a membrane bio-reactor was testified as the refractory real wastewater, in which both the removal of total organic carbon and ammonia was significant. Thus, SDBC showed certain advantages in PS activation such as feasible preparation method, remarkable efficiency and stability. These advantages proved SDBC/PS system as an effective strategy of controlling waste by waste, and implicated its potential application in full-scale for the treatment of refractory organic contaminants.

Synergistic degradation of phenols using peroxymonosulfate activated by CuO-Co3O4@MnO2 nanocatalyst

The development of transition metal based heterogeneous catalysts with efficient reactivity and intensive stability is of great demand in peroxymonosulfate based AOPs in water treatment. Herein, we present a novel approach of creating stable and effective nano-rod catalyst of CuCo@MnO₂ with tetragonal structure. A remarkable synergetic effect was found between bi-metallic oxides of Cu and Co: 0.5%Cu-2%Co-MnO₂ can efficiently degrade 100% of 30ppm phenol, while 0.5%Cu@MnO₂ or 2%Co@MnO₂ alone is apparently sluggish for the degradation of organic contaminants. The nanocatalyst retained good stability in recycling tests, during which little leaching of Co and Cu ions can be detected and crystallinity of support α-MnO₂ remained unchanged. Mechanism study indicated that SO₄^- and OH are accounted to participate the degradation, and the generation of radicals is originated from the interaction of CuCo@MnO₂ and PMS through metal site with peroxo species bond. The redox cycle among the active metals (M²⁺↔M³⁺↔M²⁺) and Cu enhanced generation of Co(II)-OH complex are critical for the remarkable performance in CuCo@MnO₂/PMS system. Both the synergetic acceleration of catalyst activity and instinct mechanism are highly suggestive to the design of heterogeneous catalysts for the degradation of organic contaminants in PMS based advanced oxidation processes.

Selection of active phase of MnO2 for catalytic ozonation of 4-nitrophenol

Catalytic ozonation is a highly effective method in wastewater treatment, and MnO₂ materials are widely recognized as active heterogeneous catalysts in this process. Many works reported the progress in active MnO₂ synthesis, but the active phase is rarely systematically studied. In this paper, all six phases of MnO₂ (α-, β-, δ-, γ-, λ- and ε-) were synthesized by facile methods. Their catalytic activities in ozonation of 4-nitrophenol (4-NP) were evaluated and correlated with the physicochemical properties obtained from X-ray Diffraction (XRD), transmission electron microscopy (TEM), physical adsorption and cyclic voltammetry (CV) analysis. α- MnO₂ was found to be the most active catalyst in 4-NP degradation at neutral pH. MnO₂ with low average oxidation state (AOS) showed stronger oxidation/reduction peaks in CV characterization, which benefited catalytic decomposition of ozone to generate active species. Superoxide radical was confirmed as the main oxidizing species, along with singlet oxygen and ozone molecule oxidation in bulk solution and little contribution of oxidation on the MnO₂ surface. Mn²⁺ leaching happened during catalytic ozonation, but its catalytic role is negligible. This result may give rise to the preparation of new active MnO₂ catalysts.

Three-dimensional MnO2 porous hollow microspheres for enhanced activity as ozonation catalysts in degradation of bisphenol A

Three-dimensional (3D) MnO₂ porous hollow microspheres (δ- and α- MnO₂ PHMSs), with high adsorption and catalytic ozonation performance, were synthesized by a self-template (MnCO₃ microspheres) process at room temperature. The synthesized MnO₂ PHMSs were characterized by X-ray diffraction (XRD), scanning electronic microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area. The results showed that PHMSs exhibit the excellent adsorption ability and catalytic activity owning to their hollow spherical structure, mesoporous shell and well-defined interior voids, leading to the strong adsorption for bisphenol A (BPA) and the retention of O₃ molecules on catalyst. Moreover, the catalytic performance of α-MnO₂ PHMSs was better than that of δ-MnO₂ PHMSs which was attributed to the richer lattice oxygen of α-MnO₂ PHMSs to accelerate O₃ decomposition by producing more reactive oxidative species. The degradation efficiency of BPA using 3D α-MnO₂ PHMSs was more than 90% in the presence of ozone within 30min reaction time. The probe tests for reactive oxidative species (ROSs) displayed that BPA degradation by catalytic ozonation is dominated by O₂^- and OH in our present study. Furthermore, the organic compounds as intermediates of the degradation process were identified by LC/MS.