Human intestinal permeability

Investigating pharmacokinetic profiles of Centella asiatica using machine learning and PBPK modelling

Physiologically based pharmacokinetic (PBPK) modeling serves as a valuable tool for determining the distribution and disposition of substances in the body of an organism. It involves a mathematical representation of the interrelationships among crucial physiological, biochemical, and physicochemical parameters. A lack of the values of pharmacokinetic parameters can be challenging in constructing a PBPK model. Herein, we propose an artificial intelligence framework to evaluate a key pharmacokinetic parameter, the intestinal effective permeability (Peff). The publicly available Peff dataset was utilized to develop regression machine learning models. The XGBoost model demonstrates the best test accuracy of R-squared (R2, coefficient of determination) of 0.68. The model is then applied to compute the Peff of asiaticoside and madecassoside, the parent compounds found in Centella asiatica. Subsequently, PBPK modeling was conducted to evaluate the biodistribution of the herbal substances following oral administration in a rat model. The simulation results were evaluated and validated, which agreed with the existing in vivo studies in rats. This in silico pipeline presents a potential approach for investigating the pharmacokinetic parameters and profiles of drugs or herbal substances, which can be used independently or integrated into other modeling systems.

Validation of a Caco-2 microfluidic Chip model for predicting intestinal absorption of BCS Class I-IV drugs

Oral delivery is considered the most patient preferred route of drug administration, however, the drug must be sufficiently soluble and permeable to successfully formulate an oral formulation. There have been advancements in the development of more predictive solubility and dissolution tools, but the tools that has been developed for permeability assays have not been validated as extensively as the gold-standard Caco-2 Transwell assay. Here, we evaluated Caco-2 intestinal permeability assay in Transwells and a commercially available microfluidic Chip using 19 representative Biopharmaceutics Classification System (BCS) Class I-IV compounds. For each selected compound, we performed a comprehensive viability test, quantified its apparent permeability (Papp), and established an in vitro in vivo correlation (IVIVC) to the human fraction absorbed (fa) in both culture conditions. Permeability differences were observed across the models as demonstrated by antipyrine (Transwell Papp: 38.5 ± 6.1 × 10-8 cm/s vs Chip Papp: 32.9 ± 11.3 × 10-8 cm/s) and nadolol (Transwell Papp: 0.6 ± 0.1 × 10-7 cm/s vs Chip Papp: 3 ± 1.2 × 10-7 cm/s). The in vitro in vivo correlation (IVIVC; Papp vs. fa) of the Transwell model (r2 = 0.59-0.83) was similar to the Chip model (r2 = 0.41-0.79), highlighting similar levels of predictivity. Comparing to historical data, our Chip Papp data was more closely aligned to native tissues assessed in Ussing chambers. This is the first study to comprehensively validate a commercial Gut-on-a-Chip model as a predictive tool for assessing oral absorption to further reduce our reliance on animal models.

Balanced Permeability Index: A Multiparameter Index for Improved In Vitro Permeability

The optimization of passive permeability is a key objective for orally available small molecule drug candidates. For drugs targeting the central nervous system (CNS), minimizing P-gp-mediated efflux is an additional important target for optimization. The physicochemical properties most strongly associated with high passive permeability and lower P-gp efflux are size, polarity, and lipophilicity. In this study, a new metric called the Balanced Permeability Index (BPI) was developed that combines these three properties. The BPI was found to be more effective than any single property in classifying molecules based on their permeability and efflux across a diverse range of chemicals and assays. BPI is easy to understand, allowing researchers to make decisions about which properties to prioritize during the drug development process.

Sex-Dependent Changes to the Intestinal and Hepatic Abundance of Drug Transporters and Metabolizing Enzymes in the SOD1G93A Mouse Model of Amyotrophic Lateral Sclerosis

Amyotrophic lateral sclerosis (ALS) is characterized by death and dysfunction of motor neurons that result in a rapidly progressing loss of motor function. While there are some data on alterations at the blood-brain barrier (BBB) in ALS and their potential impact on CNS trafficking of drugs, little is reported on the impact of this disease on the expression of drug-handling proteins in the small intestine and liver. This may impact the dosing of the many medicines that individuals with ALS are prescribed. In the present study, a proteomic evaluation was performed on small intestine and liver samples from postnatal day 120 SOD1G93A mice (a model of familial ALS that harbors a human mutant form of superoxide dismutase 1) and wild-type (WT) littermates (n = 7/genotype/sex). Untargeted, quantitative proteomics was undertaken using either label-based [tandem mass tag (TMT)] or label-free [data-independent acquisition (DIA)] acquisition strategies on high-resolution mass spectrometric instrumentation. Copper chaperone for superoxide dismutase (CCS) was significantly higher in SOD1G93A samples compared to the WT samples for both sexes and tissues, therefore representing a potential biomarker for ALS in this mouse model. Relative to WT mice, male SOD1G93A mice had significantly different proteins (Padj < 0.05, |fold-change|>1.2) in the small intestine (male 22, female 1) and liver (male 140, female 3). This included an up-regulation of intestinal transporters for dietary glucose [solute carrier (SLC) SLC5A1] and cholesterol (Niemann-Pick c1-like 1), as well as for several drugs (e.g., SLC15A1), in the male SOD1G93A mice. There was both an up-regulation (e.g., SLCO2A1) and down-regulation (ammonium transporter rh type b) of transporters in the male SOD1G93A liver. In addition, there was both an up-regulation (e.g., phosphoenolpyruvate carboxykinase) and down-regulation (e.g., carboxylesterase 1) of metabolizing enzymes in the male SOD1G93A liver. This proteomic data set identified male-specific changes to key small intestinal and hepatic transporters and metabolizing enzymes that may have important implications for the bioavailability of nutrients and drugs in individuals with ALS.

A Comprehensive Review on Novel Lipid-Based Nano Drug Delivery

Novel drug delivery system opens the doors towards nano/micro formulation strategies to overcome the challenges associated with the poorly soluble and permeable drugs. Lipid based nanoparticles are widely accepted that includes liposomes, niosomes and micelles which are FDA approved. Such lipid based drug delivery allows delivery for natural phytoconstituents, biopharmaceutical classification system (BCS) class II and class IV drugs are effectively delivered to improve its solubility, permeability and bioavailability. The article provides the recent advances and application of lipid based dosage form for improvement of therapeutic efficacy.

A Window for Enhanced Oral Delivery of Therapeutics via Lipid Nanoparticles

Oral administration of dosage forms is convenient and beneficial in several respects. Lipid nanoparticulate dosage forms have emerged as a useful carrier system in deploying low solubility drugs systemically, particularly class II, III, and IV drugs of the Biopharmaceutics Classification System. Like other nanoparticulate delivery systems, their low size-to-volume ratio facilitates uptake by phagocytosis. Lipid nanoparticles also provide scope for high drug loading and extended-release capability, ensuring diminished systemic side effects and improved pharmacokinetics. However, rapid gastrointestinal (GI) clearance of particulate delivery systems impedes efficient uptake across the mucosa. Mucoadhesion of dosage forms to the GI mucosa results in longer transit times due to interactions between the former and mucus. Delayed transit times facilitate transfer of the dosage form across the mucosa. In this regard, a balance between mucoadhesion and mucopenetration guarantees optimal systemic transfer. Furthermore, the interplay between GI anatomy and physiology is key to ensuring efficient systemic uptake. This review captures salient anatomical and physiological features of the GI tract and how these can be exploited for maximal systemic delivery of lipid nanoparticles. Materials used to impart mucoadhesion and examples of successful mucoadhesive lipid nanoformulations are highlighted in this review.

Solubility-permeability interplay of a supersaturated lutein delivery system constructed by glycosylated stevioside and hydroxypropyl-methylcellulose

This study investigated the solubilizing capacity of glycosylated stevioside/hydroxypropyl-methylcellulose (stevia-G-HPMC) complexes with varying mass ratios on lutein. The impact on the steady-state flux and permeability coefficient of intracellular lutein was also explored through the construction of a Caco-2 cellular transport model. The results indicated that the equilibrium solubility of lutein linearly increased with an increase in stevia-G amount. The stability constants of the ternary system surpassed those of the binary system. Molecular dynamics simulation revealed a tight and stable structure in lutein supersaturated complexes. Meanwhile, lutein-stevia-G-HPMC complexes demonstrated superior cumulative penetrations, with the peak Papp (AP → BL) value being (3.24 ± 0.89) × 10-5 cm·s-1. There was a slight decrease in Papp (BL → AP), which improved the forward transport of lutein. Highly soluble lutein in aqueous environments saturated the extracellular transport proteins on the AP side of cell membranes, thereby maintaining the high permeability transport. Notably, the permeability trend of lutein in Caco-2 cells negatively correlated with the equilibrium solubility and matched the single exponential growth model. When the mass ratio of lutein, stevia-G and HPMC was 1:21:5, the solubility-permeability trade-off of lutein was effectively maintained.

Physiological Dynamics in the Upper Gastrointestinal Tract and the Development of Gastrointestinal Absorption Models for the Immediate-Release Oral Dosage Forms in Healthy Adult Human

This review is a revisit of various oral drug absorption models developed in the past decades, focusing on how to incorporate the physiological dynamics in the upper gastrointestinal (GI) tract. For immediate-release oral drugs, GI absorption is a critical input of drug exposure and subsequent human body response, yet difficult to model largely due to the complex GI environment. One of the biggest hurdles lies at capturing the high within-subject variability (WSV) of bioavailability measures, which can be mechanistically explained by the GI physiological dynamics. A thorough summary of how GI dynamics is handled in the absorption models would promote the development of mechanism-based oral drug absorption models, aid in the design of clinical studies regarding dosing regimens and bioequivalence studies based on WSV, and advance the decision-making on formulation selection.

Utility of Minimal Physiologically Based Pharmacokinetic Models for Assessing Fractional Distribution, Oral Absorption, and Series-Compartment Models of Hepatic Clearance

Minimal physiologically based pharmacokinetic (mPBPK) models are physiologically relevant, require less information than full PBPK models, and offer flexibility in pharmacokinetics (PK). The well-stirred hepatic model (WSM) is commonly used in PBPK, whereas the more plausible dispersion model (DM) poses computational complexities. The series-compartment model (SCM) mimics the DM but is easier to operate. This work implements the SCM and mPBPK models for assessing fractional tissue distribution, oral absorption, and hepatic clearance using literature-reported blood and liver concentration-time data in rats for compounds mainly cleared by the liver. Further handled were various complexities, including nonlinear hepatic binding and metabolism, differing absorption kinetics, and sites of administration. The SCM containing one to five (n) liver subcompartments yields similar fittings and provides comparable estimates for hepatic extraction ratio (ER), prehepatic availability (Fg ), and first-order absorption rate constants (ka ). However, they produce decreased intrinsic clearances (CLint ) and liver-to-plasma partition coefficients (Kph ) with increasing n as expected. Model simulations demonstrated changes in intravenous and oral PK profiles with alterations in Kph and ka and with hepatic metabolic zonation. The permeability (PAMPA P) of the various compounds well explained the fitted fractional distribution (fd ) parameters. The SCM and mPBPK models offer advantages in distinguishing systemic, extrahepatic, and hepatic clearances. The SCM allows for incorporation of liver zonation and is useful in assessing changes in internal concentration gradients potentially masked by similar blood PK profiles. Improved assessment of intraorgan drug concentrations may offer insights into active moieties driving metabolism, biliary excretion, pharmacodynamics, and hepatic toxicity. SIGNIFICANCE STATEMENT: The minimal physiologically based pharmacokinetic model and the series-compartment model are useful in assessing oral absorption and hepatic clearance. They add flexibility in accounting for various drug- or system-specific complexities, including fractional distribution, nonlinear binding and saturable hepatic metabolism, and hepatic zonation. These models can offer improved insights into the intraorgan concentrations that reflect physiologically active moieties often driving disposition, pharmacodynamics, and toxicity.

Cyanocobalamin-Modified Colistin-Hyaluronan Conjugates: Synthesis and Bioactivity

Polymeric drug delivery systems enhance the biopharmaceutical properties of antibiotics by increasing their bioavailability, providing programmable and controlled-release properties, and reducing toxicity. In addition, drug delivery systems are a promising strategy to improve the intestinal permeability of various antimicrobial agents, including colistin (CT). This study describes the modification of conjugates based on CT and hyaluronic acid (HA) with cyanocobalamin (vitamin B12). Vitamin B12 was chosen as a targeting ligand because it has its own absorption pathway in the small intestine. The resulting polysaccharide conjugates contained 95 μg/mg vitamin B12 and the CT content was 335 μg/mg; they consisted of particles of two sizes, 98 and 702 nm, with a ζ-potential of approximately -25 mV. An in vitro release test at pH 7.4 and pH 5.2 showed an ultra-slow release of colistin of approximately 1% after 10 h. The modified B12 conjugates retained their antimicrobial activity at the level of pure CT (minimum inhibitory concentration was 2 μg/mL). The resulting delivery systems also reduced the nephrotoxicity of CT by 30-40% (HEK 293 cell line). In addition, the modification of B12 improved the intestinal permeability of CT, and the apparent permeability coefficient of HA-CT-B12 conjugates was 3.5 × 10^-6 cm/s, corresponding to an in vivo intestinal absorption of 50-100%. Thus, vitamin-B12-modified conjugates based on CT and HA may be promising oral delivery systems with improved biopharmaceutical properties.

Bioequivalence Dissolution Test Criteria for Formulation Development of High Solubility-Low Permeability Drugs

The purpose of the present study was to provide the experimental and theoretical basis of bioequivalence (BE) dissolution test criteria for formulation development of high solubility-low permeability drugs. According to the biowaiver scheme based on the biopharmaceutics classification system (BCS), for BCS class III drugs, a test formulation and a reference formulation are predicted to be BE when 85% of the drug dissolves within 15 min (T_85% < 15 min) in the compendial dissolution test. However, previous theoretical simulation studies have suggested that this criterion may possibly be relaxed for use in practical formulation development. In the present study, the dissolution profiles of 14 famotidine formulations for which BE has been clinically confirmed were evaluated by the compendial dissolution test at pH 1.2 and 6.8. The plasma concentration-time profiles of famotidine formulations were simulated using the dissolution data. In addition, virtual simulations were performed to estimate the range of dissolution rates to be bioequivalent. The fastest and slowest dissolution rates among the famotidine formulations were T_85% = 10 min and T_85% = 60 min at pH 6.8, respectively. The virtual simulation BE study suggested that famotidine formulations can be bioequivalent when T_85% < 99 min. In the case of BCS III drugs, the rate-limiting step of oral drug absorption is the membrane permeation process rather than the dissolution process. Therefore, a difference in the dissolution process has less effect on BE. These results contribute to a better understanding of the biowaiver approach and would be of great help in the formulation development of BCS class III drugs.

Interplay of Breast Cancer Resistance Protein (Bcrp/Abcg2), Sex, and Fed State in Oral Pharmacokinetic Variability of Furosemide in Rats

Poor and variable oral bioavailability of furosemide (FUR) presents critical challenges in pharmacotherapy. We investigated the interplay of breast cancer resistance protein (Bcrp)-mediated transport, sex, and fed state on FUR pharmacokinetics (PK) in rats. A crossover PK study of FUR (5 mg/kg, oral) was performed in Sprague-Dawley rats (3 males and 3 females), alone or with a Bcrp inhibitor, novobiocin (NOV) (20 mg/kg, oral), in both fed and fasted states. Co-administration of NOV significantly increased FUR extent (AUC) and rate (C_max) of exposure by more than two-fold, which indicates efficient Bcrp inhibition in the intestine. The female rats showed two-fold higher AUC and C_max, and two-fold lower renal clearance of FUR compared to the male rats. The latter was correlated with higher renal abundance of Bcrp and organic anion transporters (Oats) in the male rats compared to age-matched female rats. These findings suggest that the PK of Bcrp and/or Oat substrates could be sex-dependent in rats. Moreover, allometric scaling of rat PK and toxicological data of Bcrp substrates should consider species and sex differences in Bcrp and Oat abundance in the kidney. Considering that Bcrp is abundant in the intestine of rats and humans, a prospective clinical study is warranted to evaluate the effect of Bcrp inhibition on FUR PK. The potential confounding effect of the Bcrp transporter should be considered when FUR is used as a clinical probe of renal organic anion transporter-mediated drug-drug interactions. Unlike human data, no food-effect was observed on FUR PK in rats.

Influence of permeability enhancers on the paracellular permeability of metformin hydrochloride and furosemide across Caco-2 cells

Permeability enhancers can affect absorption of paracellularly transported drugs. This study aims to evaluate effects of permeability enhancers (chitosan, methyl-β -cyclodextrin, sodium caprate, sodium lauryl sulfate, etc.) on the permeability of paracellularly absorbed furosemide and metformin hydrochloride. Methyl thiazole tetrazolium bromide test was carried out to determine the drug concentrations in permeability study. Trans-epithelial electrical resistance (TEER) values determined to assess the integrity of tight junctions. Permeability enhancers were applied at different concentrations alone, in dual/triple combinations. Permeability was determined using human colorectal adenocarcinoma (Caco-2) cells (TEER > 400 Ω·cm²). Permeability enhancers have no significant effect (<2-fold; p > 0.05) on the permeability of furosemide (1.80 × 10^-5 ± 4.55 × 10^-7 cm/s); however, metformin permeability (1.36 × 10^-5 ± 1.25 × 10^-6 cm/s) increased significantly (p < 0.05) with 0.3% and 0.5% (w/v) chitosan (2.0- and 2.7-fold, respectively), 1% methyl-β -cyclodextrin (w/v) (3.5-fold), 10 and 20 µmol/L sodium caprate (2.2- and 2.8-fold, respectively), and 0.012% sodium lauryl sulfate (w/v) (1.9-fold). Furosemide permeability increased significantly (p < 0.05) with chitosan-sodium lauryl sulfate combination (1.7-fold), and all triple combinations (1.4- to 1.9-fold). Chitosan containing dual/triple combinations resulted in significant increase (p < 0.05) in metformin permeability (1.7 to 2.8-fold). All results indicated that absorption of furosemide and metformin can be improved by the combination of permeability enhancers. Therefore, it can be evaluated for the formulation of development strategies containing furosemide and metformin by the pharmaceutical industry.

In silico model-based exploration of the applicability of parallel artificial membrane permeability assay (PAMPA) to screen chemicals of environmental concern

Parallel Artificial Membrane Permeability Assay (PAMPA) is an in vitro laboratory method for screening the transmembrane permeability of chemicals. Stemming from medicinal chemistry, PAMPA has the potential for use in the cost-effective high-throughput evaluation of chemicals of environmental concern. However, many chemicals of environmental concern differ substantially from pharmaceuticals in hydrophobicity and volatility. Here, we develop an in silico mass balance model to explore the impacts of chemical properties on chemical mass transfer in PAMPA and PAMPA's applicability to hydrophobic or volatile chemicals of environmental concern. The model's performance is evaluated by agreement between predicted and measured permeabilities of 1383 chemicals. The model predicts that the PAMPA measured permeability can be highly uncertain for hydrophobic chemicals because of considerable retention by the artificial membrane and for volatile chemicals because of substantial volatilization to the headspace. Notably, the permeabilities of hydrophobic chemicals are remarkably sensitive to specific experimental conditions, for example, the frequency of stirring and incubation time, challenging the comparison between measurements under different conditions. For hydrophobic chemicals, the PAMPA measured permeability may largely indicate the permeability of the unstirred water layer over the membrane, instead of the "intrinsic" permeability of the membrane, and therefore, may not be of interest for environmental exposure and risk assessments. The model also predicts that the time for mass transfer of highly hydrophobic chemicals to reach the steady state likely exceeds the incubation time, which violates the steady-state assumption used in calculating permeability from measured concentrations. Overall, our theoretical analysis underscores the importance to consider chemical properties when applying the current design of PAMPA to chemicals of environmental concern.

The Role of Mass Spectrometry Imaging in Pharmacokinetic Studies

Although liquid chromatography-tandem mass spectrometry is the gold standard analytical platform for the quantification of drugs, metabolites, and biomarkers in biological samples, it cannot localize them in target tissues.The localization and quantification of drugs and/or their associated metabolites in target tissues is a more direct measure of bioavailability, biodistribution, efficacy, and regional toxicity compared to the traditional substitute studies using plasma.Therefore, combining high spatial resolution imaging functionality with the superior selectivity and sensitivity of mass spectrometry into one analytical technique will be a valuable tool for targeted localization and quantification of drugs, metabolites, and biomarkers.Mass spectrometry imaging (MSI) is a tagless analytical technique that allows for the direct localization and quantification of drugs, metabolites, and biomarkers in biological tissues, and has been used extensively in pharmaceutical research.The overall goal of this current review is to provide a detailed description of the working principle of MSI and its application in pharmacokinetic studies encompassing absorption, distribution, metabolism, excretion, and toxicity processes, followed by a discussion of the strategies for addressing the challenges associated with the functional utility of MSI in pharmacokinetic studies that support drug development.

Permeability of Olmesartan Medoxomil from Lipid Based and Suspension Formulations using an Optimized HDM-PAMPA Model

Hexadecane membrane-parallel artificial membrane permeability assay (HDM-PAMPA) is based on an artificial hexadecane membrane that separates the two compartments (donor and acceptor compartment). This model is used to predict the permeability of drugs in gastrointestinal tract and to simulate the passive absorption. In vivo behaviour of the drugs can be estimated with these systems in drug development studies. In our study we optimized HDM-PAMPA model to determine permeability of olmesartan medoxomil (OM) lipid based drug delivery system (OM-LBDDS). In order to prove that LBDDS formulation facilitates the weak permeability of OM, permeation rates were compared with the OM suspension formula (containing 0.25% v/w CMC). The experiment was performed on a 96-well MultiScreen® PAMPA filter plate (MAIPN4510). The permeability of olmesartan formulations from the donor to acceptor compartment separated by a HDM membrane were determined by the previous validated HPLC method. We created positive control series without coating hexadecane membrane to present the LBDDS and suspension formulation permeability from uncoated plates. The effective permeability constant (P_e) was calculated by the formula and improvement of permeability of OM-LBDDS formulation from hexadecane membrane was confirmed. On the contrary there was no permeation of OM-Suspension in the hexadecane coated plates. As a result, the intestinal permeability of OM-LBDDS was calculated to be at least 100 times more than the suspension. OM-Suspension permeation was only observed in the hexadecane uncoated positive control plates. This was also manifestation of HDM-PAMPA mimicking permeability of intestines because of its lipidic construction.

Nano-hydroxyapatite improves intestinal absorption of acetazolamide (BCS Class IV drug)–but how?

We earlier reported that coating poorly water-soluble drugs with nano-hydroxyapatite (nano-HAP) improves bioavailability after oral administration. In the present study, we coated BCS Class IV drug acetazolamide (AZ) with nano-HAP (AZ/HAP formulation), and investigated its bioavailability and nano-HAP’s role in promoting it. We tested AZ bioavailability after a single oral dose of the AZ/HAP formulation in rats, followed by a series of in vitro, ex vivo and in vivo testing. The binding state of AZ and nano-HAP was analyzed by gel filtration chromatography. AZ permeability was studied using a Caco-2 cell monolayer assay kit, to test for tight junction penetration, then using an Ussing chamber mounted with intestinal epithelium, both with and without Peyer’s patch tissue, to examine the role of intracellular transport. Fluorescence-labeled nano-HAP particles were administered orally in rats to investigate their localization in the intestinal tract. The area under the blood concentration time-curve in rats was about 4 times higher in the AZ/HAP formulation group than in the untreated AZ group. Gel filtration analysis showed AZ and nano-HAP were not bound. The Caco-2 study showed equivalent AZ permeability for both groups, but without significant change in transepithelial electrical resistance (TEER), indicating that tight junctions were not penetrated. In the Ussing chamber study, no significant difference in AZ permeability between the two groups was observed for epithelium containing Peyer’s patch tissue, but for epithelium without Peyer’s patch tissue, at high concentration, significantly higher permeability in the AZ/HAP formulation group was observed. Fluorescent labeling showed nano-HAP particles were present in both intestinal villi and Peyer’s patch tissue 30 min after oral administration. Our results suggest that nano-HAP’s enhancement of drug permeability from the small intestine occurs not via tight junctions, but intracellularly, via the intestinal villi. Further study to elucidate the mechanism of this permeability enhancement is required.

Solid-State and Particle Size Control of Pharmaceutical Cocrystals using Atomization-Based Techniques

Poor bioavailability and aqueous solubility represent a major constraint during the development of new API molecules and can influence the impact of new medicines or halt their approval to the market. Cocrystals offer a novel and competitive advantage over other conventional methods with respect towards the substantial improvement in solubility profiles relative to the single-API crystals. Furthermore, the production of such cocrystals through atomization-based methods allow for greater control, with respect to particle size reduction, to further increase the solubility of the API. Such atomization-based methods include supercritical fluid methods, conventional spray drying and electrohydrodynamic atomization/electrospraying. The influence of process parameters such as solution flow rates, pressure and solution concentration, in controlling the solid-state and final particle size are discussed in this review with respect to atomization-based methods. For the last decade, literature has been attempting to catch-up with new regulatory rulings regarding the classification of cocrystals, due in part to data sparsity. In recent years, there has been an increase in cocrystal publications, specifically employing atomization-based methods. This review considers the benefits to employing atomization-based methods for the generation of pharmaceutical cocrystals, examines the most recent regulatory changes regarding cocrystals and provides an outlook towards the future of this field.

Application of In Vivo Imaging Techniques and Diagnostic Tools in Oral Drug Delivery Research

Drug absorption following oral administration is determined by complex and dynamic interactions between gastrointestinal (GI) physiology, the drug, and its formulation. Since many of these interactions are not fully understood, the COST action on “Understanding Gastrointestinal Absorption-related Processes (UNGAP)” was initiated in 2017, with the aim to improve the current comprehension of intestinal drug absorption and foster future developments in this field. In this regard, in vivo techniques used for the characterization of human GI physiology and the intraluminal behavior of orally administered dosage forms in the GI tract are fundamental to gaining deeper mechanistic understanding of the interplay between human GI physiology and drug product performance. In this review, the potential applications, advantages, and limitations of the most important in vivo techniques relevant to oral biopharmaceutics are presented from the perspectives of different research fields.

Integration of In Silico, In Vitro and In Situ Tools for the Preformulation and Characterization of a Novel Cardio-Neuroprotective Compound during the Early Stages of Drug Development

The main aim of this work is the biopharmaceutical characterization of a new hybrid benzodiazepine-dihydropyridine derivative, JM-20, derived with potent anti-ischemic and neuroprotective effects. In this study, the pKa and the pH-solubility profile were experimentally determined. Additionally, effective intestinal permeability was measured using three in vitro epithelial cell lines (MDCK, MDCK-MDR1 and Caco-2) and an in situ closed-loop intestinal perfusion technique. The results indicate that JM-20 is more soluble at acidic pH (9.18 ± 0.16); however, the Dose number (Do) was greater than 1, suggesting that it is a low-solubility compound. The permeability values obtained with in vitro cell lines as well as with the in situ perfusion method show that JM-20 is a highly permeable compound (Caco-2 value 3.8 × 10-5). The presence of an absorption carrier-mediated transport mechanism was also demonstrated, as well as the efflux effect of P-glycoprotein on the permeability values. Finally, JM-20 was provisionally classified as class 2 according to the biopharmaceutical classification system (BCS) due to its high intestinal permeability and low solubility. The potential good oral absorption of this compound could be limited by its solubility.

'Stirred not Shaken!' Comparing Agitation Methods for Permeability Studies Using a Novel Type of 96-Well Sandwich-Plates

In order to achieve a high sample throughput, permeation experiments are often carried out using 96-well sandwich plates. Even though agitation is regarded as important, permeation studies in 96-well format are often carried out without agitation since orbital shaking, the most common agitation method for 96-well plates, has been reported to create difficulties (e.g., well-to-well cross-talk), and high cost and low availability limits the use of other agitation techniques (e.g., magnetic stirring). This study investigates how orbital shaking and magnetic stirring affect the apparent permeability of model compounds with different water-solubilities (methylene blue, carbamazepine, and albendazole) using a novel 96-well sandwich plate comprising a cellulose-hydrate membrane (PermeaPlain® plate). Orbital shaking was found less efficient than magnetic stirring in terms of homogeneously distributing a small volume of dye within the donor compartment. Furthermore, in terms of achieving maximum trans-barrier flux, magnetic stirring was found a more effective agitation method than orbital shaking. Obviously, with orbital shaking the medium in the bottom compartment of the sandwich plates never was mixed in-phase. The impact of insufficient mixing on permeation was found strongest with the most lipophilic compound, which correlates with literature reports that the contribution of the unstirred water layer towards the overall resistance of the barrier is most expressed in case of lipophilic drugs. Finally, it was tested how different liquid volumes in the bottom compartment of the plates affect the well-to-well cross-talk during permeation experiments under orbital shaking. This study revealed that 250-300 µL should be used in the bottom compartment of the sandwich plates to reduce well-to-well cross-talk when using orbital shaking for agitation.

Best practices in current models mimicking drug permeability in the gastrointestinal tract - an UNGAP review

The absorption of orally administered drug products is a complex, dynamic process, dependent on a range of biopharmaceutical properties; notably the aqueous solubility of a molecule, stability within the gastrointestinal tract (GIT) and permeability. From a regulatory perspective, the concept of high intestinal permeability is intrinsically linked to the fraction of the oral dose absorbed. The relationship between permeability and the extent of absorption means that experimental models of permeability have regularly been used as a surrogate measure to estimate the fraction absorbed. Accurate assessment of a molecule's intestinal permeability is of critical importance during the pharmaceutical development process of oral drug products, and the current review provides a critique of in vivo, in vitro and ex vivo approaches. The usefulness of in silico models to predict drug permeability is also discussed and an overview of solvent systems used in permeability assessments is provided. Studies of drug absorption in humans are an indirect indicator of intestinal permeability, but in vitro and ex vivo tools provide initial screening approaches are important tools for direct assessment of permeability in drug development. Continued refinement of the accuracy of in silico approaches and their validation with human in vivo data will facilitate more efficient characterisation of permeability earlier in the drug development process and will provide useful inputs for integrated, end-to-end absorption modelling.

Emerging investigator series: the role of chemical properties in human exposure to environmental chemicals

One of the ultimate goals of environmental exposure science is to mechanistically understand how chemical properties and human behavior interactively determine human exposure to the wide spectrum of chemicals present in the environment. This comprehensive review assembles state-of-the-art knowledge of the role of partitioning, dissociation, mass transfer, and reactive properties in human contact with and absorption of organic chemicals via oral, dermal, and respiratory routes. Existing studies have revealed that chemicals with different properties vary greatly in mass distribution and occurrence among multiple exposure media, resulting in distinct patterns of human intake from the environment. On the other hand, these chemicals encounter different levels of resistance in the passage of intestinal, dermal, and pulmonary absorption barriers and demonstrate different levels of bioavailability, due to the selectivity of biochemical, anatomical and physiological structures of these absorption barriers. Moving forward, the research community needs to gain more in-depth mechanistic insights into the complex processes in human exposure, advance the technique to better characterize and predict chemical properties, generate and leverage experimental data for a more diverse range of chemicals, and describe better the interactions between chemical properties and human behavior.

Towards a better mechanistic comprehension of drug permeation and absorption: Introducing the diffusion-partitioning interplay

The process of passive drug absorption from the gastrointestinal tract is still poorly understood and modelled. Additionally, the rapidly evolving field of pharmaceutics demands efficient, affordable and reliable in vitro tools for predicting in vivo performance. In this work, we combined established methods for quantifying drug diffusivity (localized UV-spectroscopy) and permeability (Permeapad® plate) in order to gain a better understanding of the role of unstirred water layers (UWLs) in drug absorption. The effect of diffusion/permeability media composition and viscosity on the apparent permeation resistance (R_app) of model drugs caffeine (CAF) and hydrocortisone (HC) were tested and evaluated by varying the type and concentration of viscosity-enhancing agent - glycerol or a poly(ethylene glycol) (PEG) with different average molecular weights. For all types of media, increased viscosity lead to reduction in diffusivity but could not alone explain the observed effect, which was attributed to intermolecular polymer-drug interactions. Additionally, for both drugs, smaller hydrophilic viscosity-enhancing agents (glycerol and PEG 400) had larger influence than larger ones (PEG 3350 and 6000). The results highlighted the role of UWL as an additive barrier to permeation and indicated that diffusion through UWL is the rate-limiting step to CAF's permeation, whilst HC permeability is a partition-driven process.

Versatile membrane-based microfluidic platform for in vitro drug diffusion testing mimicking in vivo environments

Mimicking the diffusion that drugs suffer through different body tissues before reaching their target is a challenge. In this work, a versatile membrane-based microfluidic platform was developed to allow for the identification of drugs that would keep their cytotoxic properties after diffusing through such a barrier. As an application case, this paper reports on a microfluidic device capable of mimicking the diffusion that free or encapsulated anticancer drugs would suffer in the intestine before reaching the bloodstream. It not only presents the successful fabrication results for the platform but also demonstrates the significant effect that the analyzed drugs have over the viability of osteosarcoma cells. This intestine-like microfluidic platform works as a tool to allow for the identification of drugs whose cytotoxic performance remains effective enough once they enter the bloodstream. Therefore, it allows for the prediction of the best treatment available for each patient in the battle against cancer.

An overview of in vitro, ex vivo and in vivo models for studying the transport of drugs across intestinal barriers

Oral administration is the most commonly used route for drug delivery owing to its cost-effectiveness, ease of administration, and high patient compliance. However, the absorption of orally delivered compounds is a complex process that greatly depends on the interplay between the characteristics of the drug/formulation and the gastrointestinal tract. In this contribution, we review the different preclinical models (in vitro, ex vivo and in vivo) from their development to application for studying the transport of drugs across intestinal barriers. This review also discusses the advantages and disadvantages of each model. Furthermore, the authors have reviewed the selection and validation of these models and how the limitations of the models can be addressed in future investigations. The correlation and predictability of the intestinal transport data from the preclinical models and human data are also explored. With the increasing popularity and prevalence of orally delivered drugs/formulations, sophisticated preclinical models with higher predictive capacity for absorption of oral formulations used in clinical studies will be needed.

Oleacein Intestinal Permeation and Metabolism in Rats Using an In Situ Perfusion Technique

Oleacein (OLEA) is one of the most important phenolic compounds in extra virgin olive oil in terms of concentration and health-promoting properties, yet there are insufficient data on its absorption and metabolism. Several non-human models have been developed to assess the intestinal permeability of drugs, among them, single-pass intestinal perfusion (SPIP), which is commonly used to investigate the trans-membrane transport of drugs in situ. In this study, the SPIP model and simultaneous luminal blood sampling were used to study the absorption and metabolism of OLEA in rats. Samples of intestinal fluid and mesenteric blood were taken at different times and the ileum segment was excised at the end of the experiment for analysis by LC-ESI-LTQ-Orbitrap-MS. OLEA was mostly metabolized by phase I reactions, undergoing hydrolysis and oxidation, and metabolite levels were much higher in the plasma than in the lumen. The large number of metabolites identified and their relatively high abundance indicates an important intestinal first-pass effect during absorption. According to the results, OLEA is well absorbed in the intestine, with an intestinal permeability similar to that of the highly permeable model compound naproxen. No significant differences were found in the percentage of absorbed OLEA and naproxen (48.98 ± 12.27% and 43.96 ± 7.58%, respectively).

In Vitro Caco-2 Cell Permeability Studies of Ziprasidone Hydrochloride Monohydrate Nanocrystals

Objectives

The current study focused on the evaluation of the cytotoxic effect and permeability of ziprasidone hydrochloride monohydrate (ZHM) nanocrystals on Caco-2 cells.

Materials and Methods

ZHM nanocrystals were prepared by the microfluidization method in the presence of polyvinylpyrrolidone as a stabilizer. Particle size (PS), particle size distribution (PDI), and zeta potential (ZP) values were measured in characterization studies. In vitro cytotoxic effects of ZHM nanocrystals were investigated using the 3-(4,5-dimetylthiazol-2-yl)-2,5-diphenyltetrazolium bromide test. Caco-2 transport studies were conducted with formulations of ZHM coarse powder and nanocrystals.

Results

Nanocrystals were obtained with 400-600 nm PS, 0.1-0.4 PDI, and >20 mV ZP values. The cell viability remained 100% for all sample groups. The permeability value of ZHM nanocrystals through Caco-2 cells increased 2.3-fold in comparison with ZHM coarse powder. Cumulative drug transport also increased at the end of the sampling period.

Conclusion

Nanocrystal technology helps to increase the permeability of drug particles by increasing the saturation solubility.

Drug Disposition in the Lower Gastrointestinal Tract: Targeting and Monitoring

The increasing prevalence of colonic diseases calls for a better understanding of the various colonic drug absorption barriers of colon-targeted formulations, and for reliable in vitro tools that accurately predict local drug disposition. In vivo relevant incubation conditions have been shown to better capture the composition of the limited colonic fluid and have resulted in relevant degradation and dissolution kinetics of drugs and formulations. Furthermore, drug hurdles such as efflux transporters and metabolising enzymes, and the presence of mucus and microbiome are slowly integrated into drug stability- and permeation assays. Traditionally, the well characterized Caco-2 cell line and the Ussing chamber technique are used to assess the absorption characteristics of small drug molecules. Recently, various stem cell-derived intestinal systems have emerged, closely mimicking epithelial physiology. Models that can assess microbiome-mediated drug metabolism or enable coculturing of gut microbiome with epithelial cells are also increasingly explored. Here we provide a comprehensive overview of the colonic physiology in relation to drug absorption, and review colon-targeting formulation strategies and in vitro tools to characterize colonic drug disposition.

Contribution of Uptake and Efflux Transporters to Oral Pharmacokinetics of Furosemide

Furosemide is a widely used diuretic for treating excessive fluid accumulation caused by disease conditions like heart failure and liver cirrhosis. Furosemide tablet formulation exhibits variable pharmacokinetics (PK) with bioavailability ranging from 10 to almost 100%. To explain the variable absorption, we integrated the physicochemical, in vitro dissolution, permeability, distribution, and the elimination parameters of furosemide in a physiologically-based pharmacokinetic (PBPK) model. Although the intravenous PBPK model reasonably described the observed in vivo PK data, the reported low passive permeability failed to capture the observed data after oral administration. To mechanistically justify this discrepancy, we hypothesized that transporter-mediated uptake contributes to the oral absorption of furosemide in conjunction with passive permeability. Our in vitro results confirmed that furosemide is a substrate of intestinal breast cancer resistance protein (BCRP), multidrug resistance-associated protein 4 (MRP4), and organic anion transporting polypeptide 2B1 (OATP2B1), but it is not a substrate of P-glycoprotein (P-gp) and MRP2. We then estimated the net transporter-mediated intestinal uptake and integrated it into the PBPK model under both fasting and fed conditions. Our in vitro data and PBPK model suggest that the absorption of furosemide is permeability-limited, and OATP2B1 and MRP4 are important for its permeability across intestinal membrane. Further, as furosemide has been proposed as a probe substrate of renal organic anion transporters (OATs) for assessing clinical drug-drug interactions (DDIs) during drug development, the confounding effects of intestinal transporters identified in this study on furosemide PK should be considered in the clinical transporter DDI studies.

Physiologically Based Pharmacokinetic/Pharmacodynamic Modeling to Support Waivers of In Vivo Clinical Studies: Current Status, Challenges, and Opportunities

Physiologically based pharmacokinetic/pharmacodynamic (PBPK/PD) modeling has been extensively applied to quantitatively translate in vitro data, predict the in vivo performance, and ultimately support waivers of in vivo clinical studies. In the area of biopharmaceutics and within the context of model-informed drug discovery and development (MID3), there is a rapidly growing interest in applying verified and validated mechanistic PBPK models to waive in vivo clinical studies. However, the regulatory acceptance of PBPK analyses for biopharmaceutics and oral drug absorption applications, which is also referred to variously as "PBPK absorption modeling" [Zhang et al. CPT: Pharmacometrics Syst. Pharmacol. 2017, 6, 492], "physiologically based absorption modeling", or "physiologically based biopharmaceutics modeling" (PBBM), remains rather low [Kesisoglou et al. J. Pharm. Sci. 2016, 105, 2723] [Heimbach et al. AAPS J. 2019, 21, 29]. Despite considerable progress in the understanding of gastrointestinal (GI) physiology, in vitro biopharmaceutic and in silico tools, PBPK models for oral absorption often suffer from an incomplete understanding of the physiology, overparameterization, and insufficient model validation and/or platform verification, all of which can represent limitations to their translatability and predictive performance. The complex interactions of drug substances and (bioenabling) formulations with the highly dynamic and heterogeneous environment of the GI tract in different age, ethnic, and genetic groups as well as disease states have not been yet fully elucidated, and they deserve further research. Along with advancements in the understanding of GI physiology and refinement of current or development of fully mechanistic in silico tools, we strongly believe that harmonization, interdisciplinary interaction, and enhancement of the translational link between in vitro, in silico, and in vivo will determine the future of PBBM. This Perspective provides an overview of the current status of PBBM, reflects on challenges and knowledge gaps, and discusses future opportunities around PBPK/PD models for oral absorption of small and large molecules to waive in vivo clinical studies.

Comprehensive two-dimensional liquid chromatography as a biomimetic screening platform for pharmacokinetic profiling of compound libraries in early drug development

A comprehensive two-dimensional liquid chromatography-based biomimetic platform (LCxLC) has been developed and validated for drug diffusion studies. Human serum albumin (HSA) and immobilized artificial membrane (IAM) were thereby used in the first (¹D) and second (²D) separation dimension, respectively. While the former was meant to emulate the blood, the latter was instead intended to mimic the intestinal mucosa epithelium. Therefore, the experimental conditions, i.e. pH, temperature and buffer composition, were modulated to reflect faithfully in vivo conditions. 30 compounds, whose effective intestinal permeability (P_eff) assayed in situ on humans by a validated technique was known from the literature, were used as model drugs. A good and orthogonal separation was achieved for the whole dataset, although for a better distribution of the most polar compounds in the elution window a segmented gradient elution program had to be employed. Interestingly, the passively uptaken compounds having the most favourable P_eff populated a specific area of the 2D plots, implying that the affinity for HSA and IAM has to lie in specific ranges in order for a compound to be satisfactorily absorbed from the intestinal lumen. Although these results should be regarded as preliminary, this work paves an entirely new and unprecedented way to profile pharmaceutically relevant compounds for their in vivo absorption and distribution potential.

In Vitro Biopredictive Methods: A Workshop Summary Report

This workshop report summarizes the proceedings of Day 1 of a three-day workshop on "Current State and Future Expectations of Translational Modeling Strategies to Support Drug Product Development, Manufacturing Changes and Controls". Physiologically based biopharmaceutics models (PBBM) are tools which enable the drug product quality attributes to be linked to the in vivo performance. These tools rely on key quality inputs in order to provide reliable predictions. After introducing the objectives of the workshop and the expectations from the breakout sessions, Day 1 of the workshop focused on the best practices and challenges in measuring in vitro inputs needed for modeling, such as the drug solubility, the dissolution rate of the drug product, potential precipitation of the drug and drug permeability. This paper reports the podium presentations and summarizes breakout session discussions related to A) the best strategies for determining solubility, supersaturation and critical supersaturation; B) the best strategies for the development of biopredictive (clinically relevant) dissolution methods; C) the challenges associated with describing gastro-intestinal systems parameters such as mucus, liquid volume and motility; and D) the challenges with translating biopharmaceutical measures of drug permeability along the gastrointestinal tract to a meaningful model parameter.

Prediction of negative food effect induced by bile micelle binding on oral absorption of hydrophilic cationic drugs

The purpose of the present study was to quantitatively predict the negative food effect induced by bile micelle binding on the oral absorption of hydrophilic cationic drugs. The intrinsic membrane permeability and bile micelle unbound fraction of 12 model drugs (7 tertiary amines, 3 quaternary ammoniums, and 2 neutral drugs) were calculated from the experimental Caco-2 permeability data (P_app) under fasted and fed conditions. From these input data, the fraction of a dose absorbed (Fa) was predicted using the gastrointestinal unified theoretical framework, a mechanism-based oral absorption model. The predicted Fa ratio (fed/fasted) was then compared with the in vivo fed/fasted area under the plasma concentration-time curve ratio (AUCr). The AUCr values of tertiary amines and neutral drugs were appropriately predicted (absolute average fold error (AAFE) = 1.19), whereas those of quaternary ammoniums were markedly underestimated (AAFE = 4.70). The P_app ratio (fed/fasted) predicted AUCr less quantitatively (AAFE = 1.30 for tertiary amines and neutral drugs). The results of the present study would lead to a better understanding of negative food effect on oral drug absorption.

The Solubility-Permeability Interplay for Solubility-Enabling Oral Formulations

The Biopharmaceutical classification system (BCS) classifies the drugs based on their intrinsic solubility and intestinal permeability. The drugs with good solubility and intestinal permeability have good bioavailability. The drugs with poor solubility and poor permeability have solubility dependent and permeability dependent bioavailability, respectively. In the current pharmaceutical field, most of the drugs have poor solubility. To solve the problem of poor solubility, various solubility enhancement approaches have been successfully used. The effects of these solubility enhancing approaches on the intestinal permeability of the drugs are a matter of concern, and must not be overlooked. The current review article focuses on the effect of various solubility enhancing approaches viz. cyclodextrin, surfactant, cosolvent, hydrotropes, and amorphous solid dispersion, on the intestinal permeability of drugs. This article will help in the designing of the optimized formulations having balanced solubility enhancement without affecting the permeability of drugs.

A proposed pediatric biopharmaceutical classification system for medications for chronic diseases in children

Age-appropriate pediatric formulations for oral administration can be challenging to formulate. Development of such formulations is often time consuming, labor-intensive and costly. The Biopharmaceutical Classification System (BCS), developed more than two decades ago, is used to develop suitable oral drug formulations for adult use. In theory, some of the same principles could be applied to formulate pediatric oral liquid dosage forms. However, the present BCS system was developed using adult gastrointestinal physiologic factors. Direct extrapolation of this method to develop pediatric oral dosage forms is inappropriate due to differences in adult and pediatric gastrointestinal physiologic differences during development. To date age-appropriate BCS to guide pediatric oral liquid formulation development has not been developed for various pediatric subpopulations. The objective of this study was to provisionally classify oral liquid formulations of extemporaneously prepared drugs at our institution into an age-appropriate BCS class after elimination of any duplicate listing when matched with the most current World Health Organization's Essential Medicines List for Children available at the time of this study and other published studies that may have reported BCS classification of drugs used as extemporaneous oral liquid formulations in children to treat chronic or rare diseases. A total of 96 orally administered extemporaneously compounded liquid formulations were included in this classification. Dose numbers were calculated using age-appropriate initial gastric volume for neonates, 6-month-old infants, and children up to 6 years of age. Using age-appropriate initial gastric volumes and pediatric and neonatal Lexicomp® age-specific maximal dosing recommendations for calculation of dose numbers, the solubility classes shifted for 62.5% of the drugs studied. A significant number of currently used extemporaneously compounded oral liquid formulations for age groups of children included in this study may not provide formulations with predictable safety and efficacy. Factors used in development of adult BCS cannot be applied directly to pediatric subpopulations.

Segmental-Dependent Solubility and Permeability as Key Factors Guiding Controlled Release Drug Product Development

The main factors influencing the absorption of orally administered drugs are solubility and permeability, which are location-dependent and may vary along the gastrointestinal tract (GIT). The purpose of this work was to investigate segmental-dependent intestinal absorption and its role in controlled-release (CR) drug product development. The solubility/dissolution and permeability of carvedilol (vs. metoprolol) were thoroughly studied, in vitro/in vivo (Octanol-buffer distribution coefficients (Log D), parallel artificial membrane permeability assay (PAMPA), rat intestinal perfusion), focusing on location-dependent effects. Carvedilol exhibits changing solubility in different conditions throughout the GIT, attributable to its zwitterionic nature. A biorelevant pH-dilution dissolution study for carvedilol immediate release (IR) vs. CR scenario elucidates that while the IR dose (25 mg) may dissolve in the GIT luminal conditions, higher doses used in CR products would precipitate if administered at once, highlighting the advantage of CR from the solubility/dissolution point of view. Likewise, segmental-dependent permeability was evident, with higher permeability of carvedilol vs. the low/high Peff marker metoprolol throughout the GIT, confirming it as a biopharmaceutical classification system (BCS) class II drug. Theoretical analysis of relevant physicochemical properties confirmed these results as well. A CR product may shift the carvedilol's solubility behavior from class II to I since only a small dose portion needs to be solubilized at a given time point. The permeability of carvedilol surpasses the threshold of metoprolol jejunal permeability throughout the entire GIT, including the colon, establishing it as a suitable candidate for CR product development. Altogether, this work may serve as an analysis model in the decision process of CR formulation development and may increase our biopharmaceutical understanding of a successful CR drug product.

ADMET profiling of geographically diverse phytochemical using chemoinformatic tools

Aim: Phytocompounds are important due to their uniqueness, however, only few reach the development phase due to their poor pharmacokinetics. Therefore, preassessing the absorption, distribution, metabolism, excretion and toxicity (ADMET) properties is essential in drug discovery. Methodology: Biologically diverse databases (Phytochemica, SerpentinaDB, SANCDB and NuBBE_DB) covering the region of India, Brazil and South Africa were considered to predict the ADMET using chemoinformatic tools (Qikprop, pkCSM and DataWarrior). Results: Screening through each of pharmacokinetic criteria resulted in identification of 24 compounds that adhere to all the ADMET properties. Furthermore, assessment revealed that five have potent anticancer biological activity against cancer cell lines. Conclusion: We have established an open-access database (ADMET-BIS) to enable identification of promising molecules that follow ADMET properties and can be considered for drug development.

Cyclodextrins in Drug Delivery Systems and Their Effects on Biological Barriers

Cyclodextrins are widely used excipients, composed of glucopyranose units with a cyclic structure. One of their most important properties, is that their inner cavity is hydrophobic, while their surface is hydrophilic. This enables them for the complex formation with lipophilic molecules. They have several applications in the pharmaceutical field like solubility enhancers or the building blocks of larger drug delivery systems. On the other hand, they have numerous effects on cells or biological barriers. In this review the most important properties of cyclodextrins and cyclodextrin-based drug delivery systems are summarized with special focus on their biological activity.