Multilayered thin films that sustain the release of functional DNA under physiological conditions

Designing Polyelectrolyte Microneedles Based on Borylated Poly(β-aminoester) Polymers To Enhance Transdermal pH-Controlled Delivery of Nucleic Acids

The use of transdermal delivery for nucleic acid administration is an interesting approach to overcoming limitations of systemic administration routes, such as first-pass effects, the painful needle injection, or their poor biodistribution. Thus, the use of a microneedle-based patch could represent a turning point for nucleic acid delivery, thanks to the possibility of self-administration of the actives in a painless and easy procedure. However, the design of transdermal systems with a higher degree of precision release is a clear need that has not been fully resolved. Committed to tackling this challenge, we present here a microneedle patch that involves a smart delivery system supported by the well-established ability of boronic acid to interact with carbohydrates in a pH-dependent manner. This system builds up a multilayer structure over a solid microneedle platform whose surface has been modified to immobilize glucosamine units that are able to interact with an oligopeptide-end terminated poly(β-aminoester) that presents a 4-carboxy-3-fluorophenylboronic acid (Bor-pBAE). Thus, sequential layers of the Bor-pBAE and plasmid DNA have been assembled, thanks to the ability of the polymer to interact with the nucleic acid at a basic pH and then gradually release the plasmid under two different conditions of pH (the physiological pH = 7.4 and the acidic pH = 5.1). We set up the design and implementation of this first proof of concept while demonstrating microneedles' safety and functionality. Additionally, we have shown the efficacy of the construct to express the encoded genes in model cell lines. In conclusion, we have established the basis to confirm that this generation of borylated poly(β-aminoesters) holds great promise as a transdermal local nucleic acid delivery system.

Postpolymerization Modification of Poly(2-vinyl-4,4-dimethyl azlactone) as a Versatile Strategy for Drug Conjugation and Stimuli-Responsive Release

Postpolymerization modification of highly defined "scaffold" polymers is a promising approach for overcoming the existing limitations of controlled radical polymerization such as batch-to-batch inconsistencies, accessibility to different monomers, and compatibility with harsh synthesis conditions. Using multiple physicochemical characterization techniques, we demonstrate that poly(2-vinyl-4,4-dimethyl azlactone) (PVDMA) scaffolds can be efficiently modified with a coumarin derivative, doxorubicin, and camptothecin small molecule drugs. Subsequently, we show that coumarin-modified PVDMA has a high cellular biocompatibility and that coumarin derivatives are liberated from the polymer in the intracellular environment for cytosolic accumulation. In addition, we report the pharmacokinetics, biodistribution, and antitumor efficacy of a PVDMA-based polymer for the first time, demonstrating unique accumulation patterns based on the administration route (i.e., intravenous vs oral), efficient tumor uptake, and tumor growth inhibition in 4T1 orthotopic triple negative breast cancer (TNBC) xenografts. This work establishes the utility of PVDMA as a versatile chemical platform for producing polymer-drug conjugates with a tunable, stimuli-responsive delivery.

Physical characteristics and stability profile of recombinant plasmid DNA within a film matrix

Plasmids are essential source material for production of biological drugs, vaccines and vectors for gene therapy. They are commonly formulated as frozen solutions. Considering the cost associated with maintenance of cold chain conditions during storage and transport, there is a significant need for alternative methods for stabilization of plasmids at ambient temperature. The objective of these studies was to identify a film-based formulation that preserved transfection efficiency of plasmids at 25 °C. A model plasmid, pAAVlacZ, was used for these studies. Transfection efficiency and agarose gel electrophoresis were utilized to assess bioactivity and changes in physical conformation of plasmid during storage. An amino acid, capable of sustaining a positive charge while supporting an alkaline environment within the film matrix, preserved transfection efficiency for 9 months at 25 °C. Addition of sugar and a plasticizer to the formulation preserved the plasmid in an amorphous state and improved handling properties of the film. The manner in which excipients were incorporated into bulk formulations and environmental humidity in which films were stored significantly impacted transfection efficiency of plasmid in the rehydrated solution. Taken together, these results suggest that plasmids can be stored for extended periods of time without refrigeration within a film matrix.

Poly(β-amino ester)s-based nanovehicles: Structural regulation and gene delivery

The first poly(β-amino) esters (PβAEs) were synthesized more than 40 years ago. Since 2000, PβAEs have been found to have excellent biocompatibility and the capability of ferrying gene molecules. Moreover, the synthesis process of PβAEs is simple, the monomers are readily available, and the polymer structure can be tailored to meet different gene delivery needs by adjusting the monomer type, monomer ratio, reaction time, etc. Therefore, PβAEs are a promising class of non-viral gene vector materials. This review paper presents a comprehensive overview of the synthesis and correlated properties of PβAEs and summarizes the progress of each type of PβAE for gene delivery. The review focuses in particular on the rational design of PβAE structures, thoroughly discusses the correlations between intrinsic structure and effect, and then finishes with the applications and perspectives of PβAEs.

Stimuli-Responsive Polymer Coatings for the Rapid and Tunable Contact Transfer of Plasmid DNA to Soft Surfaces

We report the design and characterization of thin polymer-based coatings that promote the contact transfer of DNA to soft surfaces under mild and physiologically relevant conditions. Past studies reveal polymer multilayers fabricated using linear poly(ethylene imine) (LPEI), poly(acrylic acid) (PAA), and plasmid DNA promote contact transfer of DNA to vascular tissue. Here, we demonstrate that changes in the structure of the polyamine building blocks of these materials can have substantial impacts on rates and extents of contact transfer. We used two hydrogel-based substrate models that permit identification and manipulation of parameters that influence contact transfer. We used a planar gel model to characterize films having the structure (cationic polymer/PAA/cationic polymer/plasmid DNA)_x fabricated using either LPEI or one of three poly(β-amino ester)s as polyamine building blocks. The structure of the polyamine influenced subsequent contact transfer of DNA significantly; in general, films fabricated using more hydrophilic polymers promoted transfer more effectively. This planar model also permitted characterization of the stabilities of films transferred onto secondary surfaces, revealing rates of DNA release to be slower than rates of release prior to transfer. We also used a three-dimensional hole-based hydrogel model to evaluate contact transfer of DNA from the surfaces of inflatable catheter balloons used in vascular interventions and selected a rapid-transfer coating for proof-of-concept studies to characterize balloon-mediated contact transfer of DNA to peripheral arterial tissue in swine. Our results reveal robust and largely circumferential transfer of DNA to the luminal walls of peripheral arteries using inflation times as short as 15 to 30 s. The materials and approaches reported here provide new and useful tools for promoting rapid, substrate-mediated contact transfer of plasmid DNA to soft surfaces in vitro and in vivo that could prove useful in a range of fundamental and applied contexts.

pH-Responsive Polyelectrolyte Coatings that Enable Catheter-Mediated Transfer of DNA to the Arterial Wall in Short and Clinically Relevant Inflation Times

We report the design and characterization of pH-responsive polymer coatings that enable catheter balloon-mediated transfer of DNA to arterial tissue in short, clinically relevant inflation times. Our approach exploits the pH-dependent ionization of poly(acrylic acid) (PAA) to promote disassembly and release of plasmid DNA from polyelectrolyte multilayers. We characterized the contact transfer of multilayers composed of PAA, plasmid DNA, and linear poly(ethyleneimine) (LPEI) identified as promising in prior studies on the delivery of DNA to arterial tissue. In contrast to thinner films evaluated previously, we found thicker coatings composed of 32 repeating (LPEI/PAA/LPEI/DNA)_x tetralayers to swell substantially in physiologically relevant media (in PBS; pH = 7.4). In some cases, these coatings also disintegrated or delaminated rapidly from their underlying substrates, suggesting the potential for enhanced balloon-mediated transfer. We developed a technically straightforward agarose gel-based hole-insertion model to characterize factors (inflation time, lumen size, etc.) that influence contact transfer of DNA when film-coated balloons are inflated into contact with soft surfaces. Those studies and the results of in vivo experiments using small animal (rat) and large animal (pig) models of peripheral arterial injury revealed catheters coated with these materials to promote robust contact transfer of DNA to soft hydrogel surfaces and the luminal surfaces of arterial tissue using inflation times as short as 30 s. These short inflation times are relevant in the context of clinical vascular interventions in peripheral arteries. Additional studies demonstrated that contact transfer of DNA using these short times can promote subsequent dissemination and transport of DNA to the medial tissue layer, suggesting the potential for use in therapeutically relevant applications of balloon-mediated gene transfer.

Polymeric Delivery of Therapeutic Nucleic Acids

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

Advanced in developmental organic and inorganic nanomaterial: a review

With the unique properties such as high surface area to volume ratio, stability, inertness, ease of functionalization, as well as novel optical, electrical, and magnetic behaviors, nanomaterials have a wide range of applications in various fields with the common types including nanotubes, dendrimers, quantum dots, and fullerenes. With the aim of providing useful insights to help future development of efficient and commercially viable technology for large-scale production, this review focused on the science and applications of inorganic and organic nanomaterials, emphasizing on their synthesis, processing, characterization, and applications on different fields. The applications of nanomaterials on imaging, cell and gene delivery, biosensor, cancer treatment, therapy, and others were discussed in depth. Last but not least, the future prospects and challenges in nanoscience and nanotechnology were also explored.

Star polymer-based nanolayers with immobilized complexes of polycationic stars and DNA for deposition gene delivery and recovery of intact transfected cells

We designed a novel thermoresponsive system of nanolayers composed of star poly[oligo(ethylene glycol) methacrylate]s (S-POEGMA) covalently bonded to a solid support and covered with polyplexes of cationic star polymers and plasmid DNA (pDNA). S-POEGMA stars were attached to the solid support via a UV-mediated "grafting to" method. To the best of our knowledge, for the first time, the conformational changes of obtained star nanolayers, occurring with changes in temperature, were studied using a quartz crystal microbalance technique. Next, the polyplexes of star poly[N,N'-dimethylaminoethyl methacrylate-ran-di(ethylene glycol) methacrylate] (S-P(DMAEMA-DEGMA)) with pDNA, exhibiting a phase transition temperature (T_CP) in culture medium DMEM, were deposited on S-POEGMA layers when the temperature increased above the T_CP of polyplex. The thermoresponsivity of the system was then the main mechanism for controlling the adhesion, proliferation, transfection and detachment of HT-1080 cells. The nanolayers promoted the effective cell culture and delivered nucleic acids into cells, with a transfection efficiency several times higher than that of the control. The detachment of the transfected cells was regulated only by the change of temperature. The studies demonstrated that we obtained a novel and effective system, based on a star polymer architecture, useful for gene delivery and tissue engineering applications.

Contact-Triggered Lipofection from Multilayer Films Designed as Surfaces for in Situ Transfection Strategies in Tissue Engineering

Biomaterials, which release active compounds after implantation, are an essential tool for targeted regenerative medicine. In this study, thin multilayer films loaded with lipid/DNA complexes (lipoplexes) were designed as surface coatings for in situ transfection applicable in tissue engineering and regenerative medicine. The film production and embedding of lipoplexes were based on the layer-by-layer (LbL) deposition technique. Hyaluronic acid (HA) and chitosan (CHI) were used as the polyelectrolyte components. The embedded plasmid DNA was complexed using a new designed cationic lipid formulation, namely, OH4/DOPE 1/1, the advantageous characteristics of which have been proven already. Three different methods were tested regarding its efficiency of lipid and DNA deposition. Therefore, several surface specific analytics were used to characterize the LbL formation, the lipid DNA embedding, and the surface characteristics of the multilayer films, such as fluorescence microscopy, surface plasmon resonance spectroscopy, ellipsometry, zeta potential measurements, atomic force microscopy, and scanning electron microscopy. Interaction studies were conducted for optimized lipoplex-loaded polyelectrolyte multilayers (PEMs) that showed an efficient attachment of C2C12 cells on the surface. Furthermore, no acute toxic effects were found in cell culture studies, demonstrating biocompatibility. Cell culture experiments with C2C12 cells, a cell line which is hard to transfect, demonstrated efficient transfection of the reporter gene encoding for green fluorescent protein. In vivo experiments using the chicken embryo chorion allantois membrane animal replacement model showed efficient gene-transferring rates in living complex tissues, although the DNA-loaded films were stored over 6 days under wet and dried conditions. Based on these findings, it can be concluded that OH4/DOPE 1/1 lipoplex-loaded PEMs composed of HA and CHI can be an efficient tool for in situ transfection in regenerative medicine.

Surface- and Hydrogel-Mediated Delivery of Nucleic Acid Nanoparticles

Gene expression within a cell population can be directly altered through gene delivery approaches. Traditionally for nonviral delivery, plasmids or siRNA molecules, encoding or targeting the gene of interest, are packaged within nanoparticles. These nanoparticles are then delivered to the media surrounding cells seeded onto tissue culture plastic; this technique is termed bolus delivery. Although bolus delivery is widely utilized to screen for efficient delivery vehicles and to study gene function in vitro, this delivery strategy may not result in efficient gene transfer for all cell types or may not identify those delivery vehicles that will be efficient in vivo. Furthermore, bolus delivery cannot be used in applications where patterning of gene expression is needed. In this chapter, we describe methods that incorporate material surfaces (i.e., surface-mediated delivery) or hydrogel scaffolds (i.e., hydrogel-mediated delivery) to efficiently deliver genes. This chapter includes protocols for surface-mediated DNA delivery focusing on the simplest and most effective methods, which include nonspecific immobilization of DNA complexes (both polymer and lipid vectors) onto serum-coated cell culture polystyrene and self-assembled monolayers (SAMs) of alkanethiols on gold. Also, protocols for the encapsulation of DNA/cationic polymer nanoparticles into hydrogel scaffolds are described, including methods for the encapsulation of low amounts of DNA (<0.2 μg/μl) and high amounts of DNA (>0.2 μg/μl) since incorporation of high amounts of DNA pose significant challenges due to aggregation.

Localised non-viral delivery of nucleic acids for nerve regeneration in injured nervous systems

Axons damaged by traumatic injuries are often unable to spontaneously regenerate in the adult central nervous system (CNS). Although the peripheral nervous system (PNS) has some regenerative capacity, its ability to regrow remains limited across large lesion gaps due to scar tissue formation. Nucleic acid therapy holds the potential of improving regeneration by enhancing the intrinsic growth ability of neurons and overcoming the inhibitory environment that prevents neurite outgrowth. Nucleic acids modulate gene expression by over-expression of neuronal growth factor or silencing growth-inhibitory molecules. Although in vitro outcomes appear promising, the lack of efficient non-viral nucleic acid delivery methods to the nervous system has limited the application of nucleic acid therapeutics to patients. Here, we review the recent development of efficient non-viral nucleic acid delivery platforms, as applied to the nervous system, including the transfection vectors and carriers used, as well as matrices and scaffolds that are currently used. Additionally, we will discuss possible improvements for localised nucleic acid delivery.

Layer-by-layer DNA films incorporating highly transfecting bioreducible poly(amido amine) and polyethylenimine for sequential gene delivery

Background

The layer-by-layer (LbL) assembly method offers a molecular level control of the amount and spatial distribution of bioactive molecules. However, successful clinical translation of LbL film technology will most certainly require a better understanding and control of not only the film assembly process, but also film disassembly kinetics in physiologic conditions.

Purpose

This work focuses on the understanding and control of degradation properties of LbL films for localized gene delivery.

Methods

Bioreducible poly(amido amine)s (PAAs) containing cystaminebisacrylamide (CBA), methylenebisacrylamide, and 5-amino-1-pentanol (APOL) were synthesized by Michael addition polymerization for the construction of bioreducible LbL films capable of sequential gene delivery.

Results

The synthesized PAAs were screened for desirable buffering capacity, cell transfection, and cytotoxicity characteristics together with 25 kDa branched polyethylenimine (PEI) and cross-linked 800 Da PEI. By screening the various polycations we were able to identify a copolymer of CBA and APOL for the subsequent construction of the LbL films. By incorporating a highly transfecting polycation and a nondiffusing polycation we were able to improve the overall transfection of HEK293 and MC3T3 cells from the bioreducible LbL films. We also demonstrated the dual-stage release and transfection of two different DNAs from the LbL films.

Conclusion

The results indicate that LbL films consisting of bioreducible PAAs and non-diffusing polyelectrolytes have excellent degradation properties for the development of LbL coating technology for localized gene delivery applications.

Research Progress on Rolling Circle Amplification (RCA)-Based Biomedical Sensing

Enhancing the limit of detection (LOD) is significant for crucial diseases. Cancer development could take more than 10 years, from one mutant cell to a visible tumor. Early diagnosis facilitates more effective treatment and leads to higher survival rate for cancer patients. Rolling circle amplification (RCA) is a simple and efficient isothermal enzymatic process that utilizes nuclease to generate long single stranded DNA (ssDNA) or RNA. The functional nucleic acid unit (aptamer, DNAzyme) could be replicated hundreds of times in a short period, and a lower LOD could be achieved if those units are combined with an enzymatic reaction, Surface Plasmon Resonance, electrochemical, or fluorescence detection, and other different kinds of biosensor. Multifarious RCA-based platforms have been developed to detect a variety of targets including DNA, RNA, SNP, proteins, pathogens, cytokines, micromolecules, and diseased cells. In this review, improvements in using the RCA technique for medical biosensors and biomedical applications were summarized and future trends in related research fields described.

Controlling the surface-mediated release of DNA using 'mixed multilayers'

We report the design of erodible 'mixed multilayer' coatings fabricated using plasmid DNA and combinations of both hydrolytically degradable and charge-shifting cationic polymer building blocks. Films fabricated layer-by-layer using combinations of a model poly(β-amino ester) (polymer 1) and a model charge-shifting polymer (polymer 2) exhibited DNA release profiles that were substantially different than those assembled using DNA and either polymer 1 or polymer 2 alone. In addition, the order in which layers of these two cationic polymers were deposited during assembly had a profound impact on DNA release profiles when these materials were incubated in physiological buffer. Mixed multilayers ∼225 nm thick fabricated by depositing layers of polymer 1/DNA onto films composed of polymer 2/DNA released DNA into solution over ∼60 days, with multi-phase release profiles intermediate to and exhibiting some general features of polymer 1/DNA or polymer 2/DNA films (e.g., a period of rapid release, followed by a more extended phase). In sharp contrast, 'inverted' mixed multilayers fabricated by depositing layers of polymer 2/DNA onto films composed of polymer 1/DNA exhibited release profiles that were almost completely linear over ∼60-80 days. These and other results are consistent with substantial interdiffusion and commingling (or mixing) among the individual components of these compound materials. Our results reveal this mixing to lead to new, unanticipated, and useful release profiles and provide guidance for the design of polymer-based coatings for the local, surface-mediated delivery of DNA from the surfaces of topologically complex interventional devices, such as intravascular stents, with predictable long-term release profiles.

Effect of Assembly pH on Polyelectrolyte Multilayer Surface Properties and BMP-2 Release

The effect of solution pH during layer-by-layer assembly of polyelectrolyte multilayer (PEM) coatings on properties relevant to orthopedic implant success was investigated. Bone morphogenetic protein 2 (BMP-2), a potent osteoconductive growth factor, was adsorbed onto the surface of anodized titanium, and PEM coatings prepared from solutions of poly-l-histidine and poly(methacrylic acid) were built on top of the BMP-2. High levels of BMP-2 released over several months were achieved. Approximately 2 μg/cm(2) of BMP-2 were initially adsorbed on the anodized titanium and a pH-dependent release behavior was observed, with more stable coatings assembled at pH = 6-7. Three different diffusion regimes could be determined from the release profiles: an initial burst release, a sustained release regime, and a depletion regime. BMP-2 was shown to maintain bioactivity after release from a PEM and the presence of a PEM was shown to preserve BMP-2 structure. No visible change was observed in surface roughness as the assembly pH was varied, whereas the surface energy decreased for samples prepared at more basic pH. These results indicate that the initial BMP-2 layer affects PEM surface structure, but not the functional groups exposed on the surface.

Effect of pH on the structure and drug release profiles of layer-by-layer assembled films containing polyelectrolyte, micelles, and graphene oxide

Layer by layer (lbl) assembled multilayer thin films are used in drug delivery systems with attractive advantages such as unlimited selection of building blocks and free modification of the film structure. In this paper, we report the fundamental properties of lbl films constructed from different substances such as PS-b-PAA amphiphilic block copolymer micelles (BCM) as nano-sized drug vehicles, 2D-shaped graphene oxide (GO), and branched polyethylenimine (bPEI). These films were fabricated by successive lbl assembly as a result of electrostatic interactions between the carboxyl group of BCM and amine group of functionalized GO or bPEI under various pH conditions. We also compared the thickness, roughness, morphology and degree of adsorption of the (bPEI/BCM) films to those in the (GO/BCM) films. The results showed significant difference because of the distinct pH dependence of each material. In addition, drug release rates of the GO/BCM film were more rapid those of the (bPEI/BCM) film in pH 7.4 and pH 2 PBS buffer solutions. In (bPEI/BCM/GO/BCM) film, the inserted GO layers into bPEI/BCM multilayer induced rapid drug release. We believe that these materials &pH dependent film properties allow developments in the control of coating techniques for biological and biomedical applications.

Nanocoating for biomolecule delivery using layer-by-layer self-assembly

Since its introduction in the early 1990s, layer-by-layer (LbL) self-assembly of films has been widely used in the fields of nanoelectronics, optics, sensors, surface coatings, and controlled drug delivery. The growth of this industry is propelled by the ease of film manufacture, low cost, mild assembly conditions, precise control of coating thickness, and versatility of coating materials. Despite the wealth of research on LbL for biomolecule delivery, clinical translation has been limited and slow. This review provides an overview of methods and mechanisms of loading biomolecules within LbL films and achieving controlled release. In particular, this review highlights recent advances in the development of LbL coatings for the delivery of different types of biomolecules including proteins, polypeptides, DNA, particles and viruses. To address the need for co-delivery of multiple types of biomolecules at different timing, we also review recent advances in incorporating compartmentalization into LbL assembly. Existing obstacles to clinical translation of LbL technologies and enabling technologies for future directions are also discussed.

Layer-by-layer assembly for biomedical applications in the last decade

In the past two decades, the design and manufacture of nanostructured materials has been of tremendous interest to the scientific community for their application in the biomedical field. Among the available techniques, layer-by-layer (LBL) assembly has attracted considerable attention as a convenient method to fabricate functional coatings. Nowadays, more than 1000 scientific papers are published every year, tens of patents have been deposited and some commercial products based on LBL technology have become commercially available. LBL presents several advantages, such as (1): a precise control of the coating properties; (2) environmentally friendly, mild conditions and low-cost manufacturing; (3) versatility for coating all available surfaces; (4) obtainment of homogeneous film with controlled thickness; and (5) incorporation and controlled release of biomolecules/drugs. This paper critically reviews the scientific challenge of the last 10 years--functionalizing biomaterials by LBL to obtain appropriate properties for biomedical applications, in particular in tissue engineering (TE). The analysis of the state-of-the-art highlights the current techniques and the innovative materials for scaffold and medical device preparation that are opening the way for the preparation of LBL-functionalized substrates capable of modifying their surface properties for modulating cell interaction to improve substitution, repair or enhancement of tissue function.

Polymer Multilayers that Promote the Rapid Release and Contact Transfer of DNA

We report a layer-by-layer approach to the fabrication of thin polymer-based multilayers that release DNA rapidly in physiologically relevant environments. This approach exploits the properties of a weak anionic polyelectrolyte [poly(acrylic acid); PAA] to disrupt ionic interactions and promote disassembly in coatings that otherwise erode slowly. We investigated this approach using multilayers fabricated from plasmid DNA and linear poly(ethylenimine) (LPEI), a model synthetic cationic polymer used widely for DNA delivery. LPEI/DNA multilayers erode and release DNA slowly over ∼4 days when incubated in PBS buffer. In contrast, substitution of every other layer of DNA with PAA lead to thin films that released DNA rapidly, with >60% being released in the first 5 min. These quick-release coatings release bioactive DNA and can be used to fabricate uniform coatings on a variety of objects, including the tips of inflatable balloon catheters. We demonstrate that these coatings can promote high levels of cell transfection in vitro and the robust contact transfer and expression of DNA in vascular tissue in vivo using a rat model of vascular injury. These materials provide useful alternatives to multilayers and other coatings that promote the prolonged release of DNA. More broadly, approaches that depart from the use of degradable polymers to promote film erosion create opportunities to design new gene delivery coatings using a broader range of polymer-based building blocks designed for other gene delivery applications. With further development, this approach could thus provide a new and useful platform for the rapid contact transfer of DNA to cells and tissues of interest in a range of fundamental and applied contexts.

Multilayered thin films from poly(amido amine)s and DNA

Dip-coated multilayered thin films of poly(amido amine)s (PAAs) and DNA have been developed to provide surfaces with cell-transfecting capabilities. Three types of PAAs, differing in side chain functional groups, were synthesized and characterized for their properties in forming multilayered structures with ultrasonicated calf thymus DNA (CTDNA) as model DNA. All three polymers display a multilayer build-up in linear profiles as demonstrated by UV spectroscopy. More highly charged side chains were found to provide the lowest deposition of DNA. Surface profiles of the obtained films were investigated by atomic force microscopy (AFM) and static water contact angle measurements to reveal complete surface coverage after at least four layer pair depositions, where alternating patterns of surface profiles were observed depending on whether the cationic polymer or the anionic DNA layer was on top. The stability of the formed surfaces was investigated in vitro under physiological and reductive conditions. Owing to the presence of disulfide bonds in the PAA main chain, the films were readily degraded in the presence of 1mM of DTT in vitro. Under non-reductive physiological conditions, two of the thicker films underwent thermodynamic rearrangement, which resulted in release of approximately half of the incorporated material within 1h, which was caused by the physiological salt concentration. Further, this unpacking phenomenon proved useful in transfecting COS-7 cells seeded on top of these multilayers containing functional plasmid DNA encoding for green fluorescence protein (GFP). Two out of the three different multilayers facilitated good COS-7 cell attachment, proliferation, and transfection in vitro within 2d ays of culture. Fluorescence staining further revealed the presence of DNA-containing released film material among cultured cells. The present work demonstrates the possibility of coating surfaces with thin films that are conveniently adjustable in thickness and amount of active agent to provide cell-transfecting functionality. In this manner transfection can be achieved by simply culturing cells on a multilayer-coated surface in their optimal culture condition (in the presence of serum) and without the need of removing the transfection agent to avoid cytotoxicity.

Flipped polyelectrolyte multilayer films: accessing the buried interface

Little is known concerning the interface between a polyelectrolyte multilayer, PEMU, and its substrate. Recent models suggest that excess polymer charge, compensated by counterions, remains buried within the PEMU, especially for thicker films having a nonlinear component to their growth. We report a novel approach for making free-standing multilayers of poly(diallyldimethylammonium) (PDADMA) and poly(styrenesulfonate) (PSS): after assembly on aluminum substrates, films were released by brief immersion in aqueous alkali. The multilayers were then flipped, allowing access to the initially buried substrate/PEMU interface. Experiments were performed to show that this method of release, one of many established for PEMUs, perturbed the surface and bulk of the film minimally. Film/solution and film/substrate interfaces were compared using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM was used to record topography and perform nanoindentation, while XPS provided surface elemental composition. All three methods revealed data consistent with an excess of PDADMA at the buried interface. This excess PDADMA was then complexed with additional PSS to yield "nanosandwiches" of nonstoichiometric PEMU between layers of stoichiometric PEMU.

Improved DNA microarray detection sensitivity through immobilization of preformed in solution streptavidin/biotinylated oligonucleotide conjugates

A novel immobilization approach involving binding of preformed streptavidin/biotinylated oligonucleotide conjugates onto surfaces coated with biotinylated bovine serum albumin is presented. Microarrays prepared according to the proposed method were compared, in terms of detection sensitivity and specificity, with other immobilization schemes employing coupling of biotinylated oligonucleotides onto directly adsorbed surface streptavidin, or sequential coupling of streptavidin and biotinylated oligonucleotides onto a layer of adsorbed biotinylated bovine serum albumin. A comparison was performed employing biotinylated oligonucleotides corresponding to wild- and mutant-type sequences of seven single point mutations of the BRCA1 gene. With respect to the other immobilization protocols, the proposed oligonucleotide immobilization approach offered the highest hybridization signals (at least 5 times higher) and permitted more elaborative washings, thus providing considerably higher discrimination between complimentary and non-complementary DNA sequences for all mutations tested. In addition, the hybridization kinetics were significantly enhanced compared to two other immobilization protocols, permitting PCR sample analysis in less than 40 min. Thus, the proposed oligonucleotide immobilization approach offered improved detection sensitivity and discrimination ability along with considerably reduced analysis time, and it is expected to find wide application in DNA mutation detection.

Rational design of a degradable polyanion for layer-by-layer assembly for encapsulation and release of cationic functional biomolecules

We designed and synthesized a novel degradable polyanion, poly(phthalic ethylene glycol ester), that assembles with various polycationic biomolecules to form layer-by-layer films to encapsulate and release physiologically active biomolecules.

Layer-by-layer films with bioreducible and nonbioreducible polycations for sequential DNA release

Layer-by-layer (LbL) films containing cationic polyelectrolytes and anionic bioactive molecules such as DNA are promising biomaterials for controlled and localized gene delivery for a number of biomedical applications including cancer DNA vaccine delivery. Bioreducible LbL films made of disulfide-containing poly(amido amine)s (PAAs) and plasmid DNA can be degraded by redox-active membrane proteins through the thiol-disulfide exchange reaction to release DNA exclusively into the extracellular microenvironment adjacent to the film. In order to better understand the film degradation mechanism and nature of the released species, the bioreducible film degradation is studied by atomic force microscopy, fluorescence, and dynamic light scattering in solutions containing a reducing agent. The PAA/DNA LbL film undergoes fast bulk degradation with micrometer-sized pieces breaking off from the substrate. This bulk degradation behavior is arrested by periodic insertions of a nonbioreducible poly(ethylenimine) (PEI) layer. The LbL films containing PAA/DNA and PEI/DNA bilayers display sequential film disassembly and are capable of continuously releasing DNA nanoparticles over a prolonged time. Insertion of the PEI layer enables the bioreducible LbL films to transfect human embryonic kidney 293 cells. The data conclude that the PEI layer is effective as a barrier layer against interlayer diffusion during LbL film assembly and more importantly during film disassembly. Without the barrier layer, the high mobility of cleaved PAA fragments is responsible for bulk degradation of bioreducible LbL films, which may prevent their ultimate gene-delivery applications. This work establishes a direct link among film internal structure, disassembly mechanism, and transfection efficiency. It provides a simple method to design bioreducible LbL films for sequential and long-time DNA release.

Construction and modeling of concatemeric DNA multilayers on a planar surface as monitored by QCM-D and SPR

The sequential hybridization of a 534 base pair DNA concatemer layer was monitored by QCM-D and SPR, and the QCM-D data were analyzed by Voigt viscoelastic models. The results show that Voigt-based modeling gives a good description of the experimental data but only if shear viscosity and elasticity are allowed to depend on the shear frequency. The derived layer thickness, shear viscosity and elasticity of the growing film give a representation of the DNA film in agreement with known bulk properties of DNA, and reveal a maximum in film viscosity when the molecules in the layer contain 75 base pairs. The experimental data during construction of a 3084 bp DNA concatemer layer were compared to predictions of the QCM-D response of a 1 μm thick film of rod-like polymers. A predicted nonmonotonous variation of dissipation with frequency (added mass) is in qualitative agreement with the experiments, but with a quantitative disagreement which likely reflects that the flexibility of such long DNA molecules is not included in the model.

Multilayer films assembled from naturally-derived materials for controlled protein release

Herein we designed and characterized films composed of naturally derived materials for controlled release of proteins. Traditional drug delivery strategies rely on synthetic or semisynthetic materials or utilize potentially denaturing assembly conditions that are not optimal for sensitive biologics. Layer-by-layer (LbL) assembly of films uses benign conditions and can generate films with various release mechanisms including hydrolysis-facilitated degradation. These use components such as synthetic polycations that degrade into non-natural products. Herein we report the use of a naturally derived, biocompatible and degradable polyanion, poly(β-l-malic acid), alone and in combination with chitosan in an LbL film, whose degradation products of malic acid and chitosan are both generally recognized as safe (GRAS) by the FDA. We have found that films based on this polyanion have shown sustained release of a model protein, lysozyme that can be timed from tens of minutes to multiple days through different film architectures. We also report the incorporation and release of a clinically used biologic, basic fibroblast growth factor (bFGF), which demonstrates the use of this strategy as a platform for controlled release of various biologics.

Real-time study of interactions between cytosine-cytosine pairs in DNA oligonucleotides and silver ions using dual polarization interferometry

The real-time conformational changes of cytosine (C)-rich ssDNA oligonucleotides upon binding with silver ions (Ag(+)) were studied using dual polarization interferometry (DPI). Upon the addition of Ag(+), Ag(+) selectively bound to cytosine-cytosine mismatches and formed C-Ag(+)-C complexes, inducing change of the structure of the C-rich ssDNA from random coil conformation to duplex conformation, whereas the control ssDNA without cytosine-cytosine mismatches had no such signal, which was consistent with circular dichroism (CD) characterization. The conformational change of DNA was reflected on the changes of the mass, thickness, and density values resolved by DPI. The calibration curves showed that as the concentration of Ag(+) increased from 10 nM to 8 μM, the thickness and mass values increased linearly while the density values decreased linearly. Other metal ions such as K(+), Ca(2+), Na(+), Mg(2+), Zn(2+), Mn(2+), Ni(2+), and Pb(2+) did not interfere with the interaction between Ag(+) and C-rich ssDNA, indicating that this method had a good selectivity. The practical application of this biosensor was also investigated in real samples such as drinking water. Besides, cysteine could specifically capture Ag(+) from C-Ag(+)-C complexes and transformed the structure of the C-rich DNA back from rigid double-stranded conformation to random coil conformation, which allowed cysteine to be detected selectively as well. It is expected that this biosensing strategy may be utilized to study the interaction of DNA with other molecules.

Polymer-peptide delivery platforms: effect of oligopeptide orientation on polymer-based DNA delivery

The success of nonviral transfection using polymers hinges on efficient nuclear uptake of nucleic acid cargo and overcoming intra- and extracellular barriers. By incorporating PKKKRKV heptapeptide pendent groups as nuclear localization signals (NLS) on a polymer backbone, we demonstrate protein expression levels higher than those obtained from JetPEI and Lipofectamine 2000, the latter being notorious for coupling high transfection efficiency with cytotoxicity. The orientation of the NLS peptide grafts markedly affected transfection performance. Polymers with the sequence attached to the backbone from the valine residue achieved a level of nuclear translocation higher than the levels of those having the NLS groups attached in the opposite orientation. The differences in nuclear localization and DNA complexation strength between the two orientations correlated with a striking difference in protein expression, both in cell culture and in vivo. Polyplexes formed from these comb polymer structures exhibited transfection efficiencies superior to those of Lipofectamine 2000 but with greatly reduced toxicity. Moreover, these novel polymers, when administered by intramuscular ultrasound-mediated delivery, allowed a high level of reporter gene expression in mice, demonstrating their therapeutic promise in vivo.

Controlled release of an anti-cancer drug from DNA structured nano-films

We demonstrate the generation of systemically releasable anti-cancer drugs from multilayer nanofilms. Nanofilms designed to drug release profiles in programmable fashion are promising new and alternative way for drug delivery. For the nanofilm structure, we synthesized various unique 3-dimensional anti cancer drug incorporated DNA origami structures (hairpin, Y, and X shaped) and assembled with peptide via layer-by-layer (LbL) deposition method. The key to the successful application of these nanofilms requires a novel approach of the influence of DNA architecture for the drug release from functional nano-sized surface. Herein, we have taken first steps in building and controlling the drug incorporated DNA origami based multilayered nanostructure. Our finding highlights the novel and unique drug release character of LbL systems in serum condition taken full advantages of DNA origami structure. This multilayer thin film dramatically affects not only the release profiles but also the structure stability in protein rich serum condition.

Mutant MCP-1 protein delivery from layer-by-layer coatings on orthopedic implants to modulate inflammatory response

Total joint replacement (TJR) is a common and effective surgical procedure for hip or knee joint reconstruction. However, the production of wear particles is inevitable for all TJRs, which activates macrophages and initiates an inflammatory cascade often resulting in bone loss, prosthetic loosening and eventual TJR failure. Macrophage Chemoattractant Protein-1 (MCP-1) is one of the most potent cytokines responsible for macrophage cell recruitment, and previous studies suggest that mutant MCP-1 proteins such as 7ND may be used as a decoy drug to block the receptor and reduce inflammatory cell recruitment. Here we report the development of a biodegradable, layer-by-layer (LBL) coating platform that allows efficient loading and controlled release of 7ND proteins from the surface of orthopedic implants using as few as 14 layers. Scanning electron microscopy and fluorescence imaging confirmed effective coating using the LBL procedure on titanium rods. 7ND protein loading concentration and release kinetics can be modulated by varying the polyelectrolytes of choice, the polymer chemistry, the pH of the polyelectrolyte solution, and the degradation rate of the LBL assembly. The released 7ND from LBL coating retained its bioactivity and effectively reduced macrophage migration towards MCP-1. Finally, the LBL coating remained intact following a femoral rod implantation procedure as determined by immunostaining of the 7ND coating. The LBL platform reported herein may be applied for in situ controlled release of 7ND protein from orthopedic implants, to reduce wear particle-induced inflammatory responses in an effort to prolong the lifetime of implants.

(3-aminopropyl)-4-methylpiperazine end-capped poly(1,4-butanediol diacrylate-co-4-amino-1-butanol)-based multilayer films for gene delivery

Biodegradable polyelectrolyte surfaces for gene delivery were created through electrospinning of biodegradable polycations combined with iterative solution-based multilayer coating. Poly(β-amino ester) (PBAE) poly(1,4-butanediol diacrylate-co-4-amino-1-butanol) end-capped with 1-(3-aminopropyl)-4-methylpiperazine was utilized because of its ability to electrostatically interact with anionic molecules like DNA, its biodegradability, and its low cytotoxicity. A new DNA release system was developed for sustained release of DNA over 24 h, accompanied by high exogenous gene expression in primary human glioblastoma (GB) cells. Electrospinning a different PBAE, poly(1,4-butanediol diacrylate-co-4,4'-trimethylenedipiperidine), and its combination with polyelectrolyte 1-(3-aminopropyl)-4-methylpiperazine end-capped poly(1,4-butanediol diacrylate-co-4-amino-1-butanol)-based multilayers are promising for DNA release and intracellular delivery from a surface.

Polyelectrolyte multilayers promote stent-mediated delivery of DNA to vascular tissue

We report an approach to deliver DNA to vascular tissue in vivo using intravascular stents coated with degradable, DNA-containing polyelectrolyte multilayers (PEMs). Ionically cross-linked multilayers ∼120 nm thick were fabricated layer-by-layer on the surfaces of balloon-mounted stainless steel stents using plasmid DNA and a hydrolytically degradable poly(β-amino ester) (polymer 1). Characterization of stents coated using a fluorescently end-labeled analog of polymer 1 revealed film erosion to be uniform across the surfaces of the stents; differential stresses experienced upon balloon expansion did not lead to faster film erosion or dose dumping of DNA in areas near stent joints when stents were incubated in physiologically relevant media. The ability of film-coated stents to transfer DNA and transfect arterial tissue in vivo was then investigated in pigs and rabbits. Stents coated with films fabricated using fluorescently labeled DNA resulted in uniform transfer of DNA to sub-endothelial tissue in the arteries of pigs in patterns corresponding to the locations and geometries of stent struts. Stents coated with films fabricated using polymer 1 and plasmid DNA encoding EGFP resulted in expression of EGFP in the medial layers of stented tissue in both pigs and rabbits two days after implantation. The results of this study, combined with the modular and versatile nature of layer-by-layer assembly, provide a polymer-based platform that is well suited for fundamental studies of stent-mediated gene transfer. With further development, this approach could also prove useful for the design of nonviral, gene-based approaches for prevention of complications that arise from the implantation of stents and other implantable interventional devices.

Smart Layer-by-Layer Assemblies for Drug Delivery

Layer-by-layer (LbL) assembly is an effective tool for development of surface coatings and capsules for localized, controlled delivery of bioactive molecules. Because of the unprecedented versatility of the technique, a broad range of nanoobjects, including molecules, particles, micelles, vesicles and others with diverse chemistry and architecture can be used as building blocks for LbL assemblies, opening various routes for inclusion and delivery of functional molecules to/from LbL films. Moreover, the LbL technique continues to show its power in constructing three-dimensional (3D) delivery containers, in which LbL walls can additionally control delivery of functional molecules incorporated in the capsule interior. In this chapter, we discuss recent progress in the use of LbL assemblies to control release of therapeutic compounds via diffusion, hydrolytic degradation, pH, ionic strength or temperature variations, application of light, ultrasound, electric and magnetic field stimuli, redox activation or biological stimuli.