Insight in the phase separation peculiarities of poly(dialkylaminoethyl methacrylate)s

Stimulus-Responsive Gas Marbles as an Amphibious Carrier for Gaseous Materials

Gas marbles are a new family of particle-stabilized soft dispersed system with a soap bubble-like air-in-water-in-air structure. Herein, stimulus-responsive character is successfully introduced to a gas marble system for the first time using polymer particles carrying a poly(tertiary amine methacrylate) (pKa ≈7) steric stabilizer on their surfaces as a particulate stabilizer. The gas marbles exhibited long-term stability when transferred onto the planar surface of liquid water, provided that the solution pH of the subphase is basic and neutral. In contrast, the use of acidic solutions led to immediate disintegration of the gas marbles, resulting in release of the inner gas. The critical minimum solution pH required for long-term gas marble stability correlates closely with the known pKa value for the poly(tertiary amine methacrylate) stabilizer. It also demonstrates amphibious motions of the gas marbles.

An Evolutionary Review of Hemoperfusion Adsorbents: Materials, Preparation, Functionalization, and Outlook

Accumulation of pathogenic factors in the blood may cause irreversible damage and may even be life-threatening. Hemoperfusion is an effective technique for eliminating pathogenic factors, which is widely used in the treatment of various diseases including liver failure, renal failure, sepsis, and others. Hemoperfusion adsorbents are crucial in this process as they specifically bind and remove the target pathogenic factors. This review describes the development of hemoperfusion adsorbents, detailing the different properties exhibited by inorganic materials, organic polymers, and new materials. Advances in natural and synthetic polymers and novel materials manufacturing techniques have driven the expansion of hemoperfusion adsorbents in clinical applications. Stimuli-responsive (smart responsive) adsorbents with controllable molecular binding properties have many promising and environmentally friendly biomedical applications. Knowledge gaps, future research directions, and prospects for hemoperfusion adsorbents are discussed.

Comparing polymer-surfactant complexes to polyelectrolytes

HYPOTHESIS

Understanding the complex interactions between polymers and surfactants is required to optimise commercially relevant systems such as paint, toothpaste and detergent. Neutral polymers complex with surfactants, forming 'pearl necklace' structures that are often conceptualised as pseudo-polyelectrolytes. Here we pose two questions to test the limits of this analogy: Firstly, in the presence of salt, do these polymer-surfactant systems behave like polyelectrolytes? Secondly, do polymer-surfactant complexes resist geometric confinement like polyelectrolytes?

EXPERIMENTS

We test the limits of the pseudo-polyelectrolyte analogy through studying a poly(N-isopropylacrylamide) (PNIPAM) brush in the presence of sodium dodecylsulfate (SDS). Brushes are ideal for interrogating pseudo-polyelectrolytes, as neutral and polyelectrolyte brushes exhibit distinct and well understood behaviours. Spectroscopic ellipsometry, quartz crystal microbalance with dissipation monitoring (QCM-D), and neutron reflectometry (NR) were used to monitor the behaviour and structure of the PNIPAM-SDS system as a function of NaCl concentration. The ability of the PNIPAM-SDS complex to resist geometric confinement was probed with NR.

FINDINGS

At a fixed SDS concentration below the zero-salt CMC, increasing NaCl concentration <100 mM promoted brush swelling due to an increase in osmotic pressure, not dissimilar to a weak polyelectrolyte. At these salt concentrations, the swelling of the brush could be described by a single parameter: the effective CMC. However, at high NaCl concentrations (e.g., 500 mM) no brush collapse was observed at all (non-zero) concentrations of SDS studied, contrary to what is seen for many polyelectrolytes. Study of the polymer-surfactant system under confinement revealed that the physical volume of surfactant dominates the structure of the strongly confined system, which further differentiates it from the polyelectrolyte case.

Dense Monolayer Network Structures of Double Hydrophilic Hyperbranched Copolymers at the Air/Water Interface

Influences of subphase pH and temperature on the interfacial aggregation behavior of two double hydrophilic hyperbranched copolymers of poly[oligo(ethylene glycol) methacrylate-co-(2-diisopropylamino)ethyl methacrylate] (P(OEGMA-co-DIPAEMA)) at the air/water interface are studied by the Langmuir film balance technique. Morphologies of their Langmuir-Blodgett (LB) films are characterized by atomic force microscopy (AFM). At the interface, P(OEGMA-co-DIPAEMA) copolymers tend to form a dense network structure of circular micelles composed of branching agent-connected carbon backbone cores and mixed shells of OEGMA and DIPAEMA segments (pendant groups). This network structure containing many honeycomb-like holes with diameters of 6-8 nm is identified for the first time and clearly observed in the enlarged AFM images of their LB films. Under acidic conditions, surface pressure versus molecular area isotherms of the two copolymers in the low-pressure region show larger mean molecular area than those under neutral and alkaline conditions due to the lack of impediment from DIPAEMA segments. Upon further compression, each isotherm exhibits a wide pseudo-plateau, which corresponds to OEGMA segments being pressed into the subphase. Furthermore, the isotherms under neutral and alkaline conditions exhibit the lower critical solution temperature behavior of OEGMA segments, and the critical temperature is lower when the hyperbranched copolymer contains higher OEGMA content.

Novel Multi-Responsive Hyperbranched Polyelectrolyte Polyplexes as Potential Gene Delivery Vectors

In this work, we investigate the complexation behavior of poly(oligo(ethylene glycol)methyl methacrylate)-co-poly(2-(diisopropylamino)ethyl methacrylate), P(OEGMA-co-DIPAEMA), hyperbranched polyelectrolyte copolymers, synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization, with short-linear DNA molecules. The synthesized hyperbranched copolymers (HBC), having a different chemical composition, are prepared in order to study their ability to bind with a linear nucleic acid at various N/P ratios (amine over phosphate groups). Specifically, the three pH and thermo-responsive P(OEGMA-co-DIPAEMA) hyperbranched copolymers were able to form polyplexes with DNA, with dimensions in the nanoscale. Using several physicochemical methods, such as dynamic and electrophoretic light scattering (DLS, ELS), as well as fluorescence spectroscopy (FS), the complexation process and the properties of formed polyplexes were explored in response to physical and chemical stimuli such as temperature, pH, and ionic strength. The mass and the size of polyplexes are shown to be affected by the hydrophobicity of the copolymer utilized each time, as well as the N/P ratio. Additionally, the stability of polyplexes in the presence of serum proteins is found to be excellent. Finally, the multi-responsive hyperbranched copolymers were evaluated regarding their cytotoxicity via in vitro experiments on HEK 293 non-cancerous cell lines and found to be sufficiently non-toxic. Based on our results, these polyplexes could be useful candidates for gene delivery and related biomedical applications.

In Vitro Release and In Vivo Pharmacokinetics of Praziquantel Loaded in Different Polymer Particles

Approximately 1 billion people are affected by neglected diseases around the world. Among these diseases, schistosomiasis constitutes one of the most important public health problems, being caused by Schistosoma mansoni and treated through the oral administration of praziquantel (PZQ). Despite being a common disease in children, the medication is delivered in the form of large, bitter-tasting tablets, which makes it difficult for patients to comply with the treatment. In order to mask the taste of the drug, allow more appropriate doses for children, and enhance the absorption by the body, different polymer matrices based on poly(methyl methacrylate) (PMMA) were developed and used to encapsulate PZQ. Polymer matrices included PMMA nano- and microparticles, PMMA-co-DEAEMA (2-(diethylamino)ethyl methacrylate), and PMMA-co-DMAEMA (2-(dimethylamino)ethyl methacrylate) microparticles. The performances of the drug-loaded particles were characterized in vitro through dissolution tests and in vivo through pharmacokinetic analyses in rats for the first time. The in vitro dissolution studies were carried out in accordance with the Brazilian Pharmacopeia and revealed a good PZQ release profile in an acidic medium for the PMMA-DEAEMA copolymer, reaching values close to 100 % in less than 3 h. The in vivo pharmacokinetic analyses were conducted using free PZQ as the control group that was compared with the investigated matrices. The drug was administered orally at doses of 60 mg/kg, and the PMMA-co-DEAEMA copolymer microparticles were found to be the most efficient release system among the investigated ones, reaching a C_max value of 1007 ± 83 ng/mL, even higher than that observed for free PZQ, which displayed a C_max value of 432 ± 98 ng/mL.

Phase Separation of Aqueous Poly(diisopropylaminoethyl methacrylate) upon Heating

Poly(diisopropylaminoethyl methacrylate) (PDPA) is a pH- and thermally responsive water-soluble polymer. This study deepens the understanding of its phase separation behavior upon heating. Phase separation upon heating was investigated in salt solutions of varying pH and ionic strength. The effect of the counterion on the phase transition upon heating is clearly demonstrated for chloride-, phosphate-, and citrate-anions. Phase separation did not occur in pure water. The buffer solutions exhibited similar cloud points, but phase separation occurred in different pH ranges and with different mechanisms. The solution behavior of a block copolymer comprising poly(dimethylaminoethyl methacrylate) (PDMAEMA) and PDPA was investigated. Since the PDMAEMA and PDPA blocks phase separate within different pH- and temperature ranges, the block copolymer forms micelle-like structures at high temperature or pH.

Functional Mesostructured Electrospun Polymer Nonwovens with Supramolecular Nanofibers

Functional, hierarchically mesostructured nonwovens are of fundamental importance because complex fiber morphologies increase the active surface area and functionality allowing for the effective immobilization of metal nanoparticles. Such complex functional fiber morphologies clearly widen the property profile and enable the preparation of more efficient and selective filter media. Here, we demonstrate the realization of hierarchically mesostructured nonwovens with barbed wire-like morphology by combining electrospun polystyrene fibers, decorated with patchy worm-like micelles, with solution-processed supramolecular short fibers composed of 1,3,5-benzenetricarboxamides with peripheral N,N-diisopropylaminoethyl substituents. The worm-like micelles with a patchy microphase-separated corona were prepared by crystallization-driven self-assembly of a polyethylene based triblock terpolymer and deposited on top of the polystyrene fibers by coaxial electrospinning. The micelles were designed in a way that their patches promote the directed self-assembly of the 1,3,5-benzenetricarboxamide and the fixation of the supramolecular nanofibers on the supporting polystyrene fibers. Functionality of the mesostructured nonwoven is provided by the peripheral N,N-diisopropylaminoethyl substituents of the 1,3,5-benzenetricarboxamide and proven by the effective immobilization of individual palladium nanoparticles on the supramolecular nanofibers. The preparation of hierarchically mesostructured nonwovens and their shown functionality demonstrate that such systems are attractive candidates to be used for example in filtration, selective separation and heterogenous catalysis. This article is protected by copyright. All rights reserved.

Exploring the role of Muscovite in poly(alkyl methacrylate)-based ternary nanocomposite cryogels with selective functional groups: formation via cryogelling with the aid of inorganic clay

Easy fabrication of inorganic clay muscovite (MUS) embedded poly(2-acrylamido-2-methyl-1-propane sulfonic acid-co-diethylaminoethyl methacrylate-co-hydroxyethyl methacrylate) (PADH) nanocomposite cryogels with dual temperature/pH dependent catalytic potential was reported. Nanocomposite cryogels were fabricated by a method involving cryogelation and free radical crosslinking of aqueous systems containing MUS ranging from 0% to 1.50% (w/v). The changes in the properties of polybasic PADH networks were investigated to explain how the network parameters and gel properties were affected by the addition of clay, with the formation of a single terpolymer-MUS structure. The potential of the addition of different amounts of MUS to strengthen the prepared terpolymer matrix was investigated by uniaxial compression tests. By lowering the polymerization temperature or increasing the MUS content, the PADH/MUS nanocomposite cryogels became more elastic and compressible with stronger entanglement of terpolymer chains between the clay layers. With the addition of 1.50% (w/v) MUS, the swelling capacity was reduced by 50%, resulting in a two-fold increase in compression elasticity. The nanocomposite gels showed a strong pH-dependence, and when the pH of the swelling medium decreased from 9.8 to 2.1, there was a significant increase in the degree of swelling with increasing protonation of tertiary amine groups. Under an acidic environment, the swelling capacity of the nanocomposite gel containing 1.10% (w/v) MUS increased by 49.5%. In temperature dependent swelling between 15 and 75 °C, all ternary PADH/MUS-Ngels showed a tendency to swell at low and high swelling temperatures, by the predominance of DEAEM units at low temperatures and HEMA monomers at high temperatures, respectively. As the temperature was increased to 55 °C, the swelling decreased and reached a minimum, and then the nanocomposite gels tended to swell again. The obtained results provide an insight into the effect of MUS addition on the properties of poly(alkyl methacrylate)-based ternary nanocomposite gels and demonstrate a simple and efficient way to produce multiple response systems with enhanced elasticity.

Thermoresponsive Polymers Based on Tertiary Amine Moieties

Thermoresponsive polymers exhibiting unique reversible phase transition properties in aqueous solution in response to temperature stimuli have been extensively investigated. In the past two decades, thermoresponsive polymers based on tertiary amine moieties have achieved considerable progress and become an important family of thermoresponsive polymers, including tertiary amine functionalized poly((meth)acrylamide)s, poly((meth)acrylate)s, poly(styrene)s, poly(vinyl alcohol)s, and poly(ethylene oxide)s, which exhibit lower critical solution temperature and/or upper critical solution temperature in water or aliphatic alcohols. Their phase transition behavior can be modulated by the solution pH and CO₂ due to the protonation of tertiary amine moieties in acidic condition and deprotonation in alkaline condition and the charged ammonium bicarbonate formed by the tertiary amine moieties and CO₂ . The aim of this review is to summarize the recent progress in the thermoresponsive polymers based on tertiary amine moieties.

Correlation between Protonation of Tailor-Made Polypiperazines and Endosomal Escape for Cytosolic Protein Delivery

Responsive polymers, which become protonated at decreasing pH, are considered a milestone in the development of synthetic cell entry vectors. Exact correlations between their properties and their ability to escape the endosome, however, often remain elusive due to hydrophobic interactions or limitations in the design of water-soluble materials with suitable basicity. Here, we present a series of well-defined, hydrophilic polypiperazines, where systematic variation of the amino moiety facilitates an unprecedented fine-tuning of the basicity or pK_a value within the physiologically relevant range (pH 6-7.4). Coincubation of HEK 293T cells with various probes, including small fluorophores or functioning proteins, revealed a rapid increase of endosomal release for polymers with pK_a values above 6.5 or 7 in serum-free or serum-containing media, respectively. Similarly, cytotoxic effects became severe at increased pK_a values (>7). Although the window for effective transport appears narrow, the discovered correlations offer a principal guideline for the design of effective polymers for endosomal escape.

Tuning the Cloud-Point and Flocculation Temperature of Poly(2-(diethylamino)ethyl methacrylate)-Based Nanoparticles via a Postpolymerization Betainization Approach

The ability to tune the behavior of temperature-responsive polymers and self-assembled nanostructures has attracted significant interest in recent years, particularly in regard to their use in biotechnological applications. Herein, well-defined poly(2-(diethylamino)ethyl methacrylate) (PDEAEMA)-based core-shell particles were prepared by RAFT-mediated emulsion polymerization, which displayed a lower-critical solution temperature (LCST) phase transition in aqueous media. The tertiary amine groups of PDEAEMA units were then utilized as functional handles to modify the core-forming block chemistry via a postpolymerization betainization approach for tuning both the cloud-point temperature (T _CP) and flocculation temperature (T _CFT) of these particles. In particular, four different sulfonate salts were explored aiming to investigate the effect of the carbon chain length and the presence of hydroxyl functionalities alongside the carbon spacer on the particle's thermoresponsiveness. In all cases, it was possible to regulate both T _CP and T _CFT of these nanoparticles upon varying the degree of betainization. Although T _CP was found to be dependent on the type of betainization reagent utilized, it only significantly increased for particles betainized using sodium 3-chloro-2-hydroxy-1-propanesulfonate, while varying the aliphatic chain length of the sulfobetaine only provided limited temperature variation. In comparison, the onset of flocculation for betainized particles varied over a much broader temperature range when varying the degree of betainization with no real correlation identified between T _CFT and the sulfobetaine structure. Moreover, experimental results were shown to partially correlate to computational oligomer hydrophobicity calculations. Overall, the innovative postpolymerization betainization approach utilizing various sulfonate salts reported herein provides a straightforward methodology for modifying the thermoresponsive behavior of soft polymeric particles with potential applications in drug delivery, sensing, and oil/lubricant viscosity modification.

One-Shot Preparation of Polybasic Ternary Hybrid Cryogels Consisting of Halloysite Nanotubes and Tertiary Amine Functional Groups: An Efficient and Convenient Way by Freezing-Induced Gelation

A convenient method for the preparation of polybasic ternary hybrid cryogels consisting of Halloysite nanotubes (HNTs) and tertiary amine functional groups by freezing-induced gelation is proposed. Ternary hybrid gels were produced via one-shot radical terpolymerization of 2-hydroxyethyl methacrylate (HEMA), 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS), and DEAEMA in the presence of HNTs. The equilibrium swelling in various swelling media and the mechanical properties of the produced ternary hybrid gels were analyzed to investigate their network structure and determine their final performance. The swelling ratio of HNT-free gels was significantly higher than the ternary hybrid gels composed of high amount of HNTs. The addition of HNTs to terpolymer network did not suppress pH- and temperature-sensitive behavior. While DEAEMA groups were effective for pH-sensitive swelling, it was determined that both HEMA and DEAEMA groups were effective in temperature-sensitive swelling. Ternary hybrid gels simultaneously demonstrated both negative and positive temperature-responsive swelling behavior. The swelling ratio changed considerably according to swelling temperature. Both DEAEMA and HEMA monomers in terpolymer structure were dominant in temperature-sensitive swelling. Mechanical tests in compression of both as-prepared and swollen-state demonstrated that strength and modulus of hybrid cryogels significantly increased with addition of HNTs without significant loss of mechanical strength. Ultimately, the results of the current system can benefit characterization with analysis tools for the application of innovative materials.

Electrochemical Stimulation of Water-Oil Interfaces by Nonionic-Cationic Block Copolymer Systems

Variable interfacial tension could be desirable for many applications. Beyond classical stimuli like temperature, we introduce an electrochemical approach employing polymers. Hence, aqueous solutions of the nonionic-cationic block copolymer poly(ethylene oxide)₁₁₄-b-poly{[2-(methacryloyloxy)ethyl]diisopropylmethylammonium chloride}₁₇₁ (i.e., PEO₁₁₄-b-PDPAEMA₁₇₁ with a quaternized poly(diisopropylaminoethyl methacrylate) block) were investigated by emerging drop measurements and dynamic light scattering, analyzing the PEO₁₁₄-b-qPDPAEMA₁₇₁ impact on the interfacial tension between water and n-decane and its micellar formation in the aqueous bulk phase. Potassium hexacyanoferrates (HCFs) were used as electroactive complexants for the charged block, which convert the bishydrophilic copolymer into amphiphilic species. Interestingly, ferricyanides ([Fe(CN)₆]^3-) act as stronger complexants than ferrocyanides ([Fe(CN)₆]^4-), leading to an insoluble qPDPAEMA block in the presence of ferricyanides. Hence, bulk micellization was demonstrated by light scattering. Due to their addressability, in situ redox experiments were performed to trace the interfacial tension under electrochemical control, directly utilizing a drop shape analyzer. Here, the open-circuit potential (OCP) was changed by electrolysis to vary the ratio between ferricyanides and ferrocyanides in the aqueous solution. While a chemical oxidation/reduction is feasible, also an electrochemical oxidation leads to a significant change in the interfacial tension properties. In contrast, a corresponding electrochemical reduction showed only a slight response after converting ferricyanides to ferrocyanides. Atomic force microscopy (AFM) images of the liquid/liquid interface transferred to a solid substrate showed particles that are in accordance with the diameter from light scattering experiments of the bulk phase. In conclusion, the present results could be an important step toward economic switching of interfaces suitable, e.g., for emulsion breakage.

Multi-responsive poly(oligo(ethylene glycol)methyl methacrylate)-co-poly(2-(diisopropylamino)ethyl methacrylate) hyperbranched copolymers via reversible addition fragmentation chain transfer polymerization

Multi-responsive P(OEGMA-co-DIPAEMA) hyperbranched copolymers are synthesized via RAFT polymerization. The copolymers form different aggregates in aqueous media depending on solution pH, temperature and copolymer composition.

Charge-balanced terpolymer poly(diethylaminoethyl methacrylate-hydroxyethyl methacrylate-2-acrylamido-2-methyl-propanesulfonic acid) hydrogels and cryogels: scaling parameters and correlation with composition

The scaling laws relating the preparation conditions to the swelling degree, reduced modulus and effective crosslinking density of poly(diethylaminoethyl methacrylate-co-hydroxyethyl methacrylate-co-2-acrylamido-2-methyl-propanesulfonic acid), henceforth designated as PDHA, gels prepared by radical crosslinking copolymerization in a solvent mixture were reported. Charge-balanced terpolymer PDHA hydrogels and cryogels (PDHA-Hgs and Cgs) were prepared in different monomer feed compositions. The swelling dependence of the reduced modulus was described by a power law relationship G_r≈ (φ_V)^m with an exponent of m = -0.30 at low swelling degree, while in the high swelling region the scaling becomes 0.21, indicating the finite extensibility of the network chains. The scaling exponent for the swelling degree and terpolymer composition, φ_V≈ (Nν)^m, was found to be -0.13, indicating the increasing extent of the topological constraints arising from the trapped entanglements. By combining elasticity and swelling results, the scaling relationship between the apparent crosslink density and HEMA content used in the terpolymer feed was obtained as a cubic polynomial of the mol% of HEMA. In the HEMA-rich terpolymer PDHA Hgs and Cgs, the swelling degree was possibly controlled by the HEMA part of the terpolymer network, while the presence of DEAEM units in the network triggered the thermoresponsive swelling behavior. The dependence of interaction parameter χ on the volume fraction of the crosslinked terpolymer network in the swollen gel ν₂ was evaluated and the results revealed extremely strong concentration dependence of χ for all terpolymer samples. Because of their inherent properties, the resulting terpolymer gels might contribute to the improvement of the loading capacity of polymers used in anticancer drug delivery systems.

Complex Formation of Sulfobetaine Surfactant and Ionic Polymers and Their Stimuli Responsivity

We investigated the kinds of complexes sulfobetaine surfactant and ionic polymer formed using lauramidopropyl hydroxysultane (LAPHS) as a sulfobetaine surfactant, poly(sodium styrenesulfonate) (PSSNa) as the anionic polymer and poly[3-(methacrylamido)propyl trimethylammonium chloride] (PMAPTAC) as the cationic polymer. The fundamental properties of LAPHS at various salt concentrations were estimated by various measurements, and it was confirmed that the LAPHS micelles alone did not show temperature responsiveness. The presence of large aggregates in addition to LAPHS micelles was confirmed in the aggregates prepared by adding PSSNa to LAPHS at a charge ratio of 1:0.5, 1:1, and 1:2. However, the aggregates could not be formed when the salt concentration was high or when a monomer was added instead of the polymer. This revealed that the cation part of sulfobetaine, which is the shell of LAPHS micelles, and the anion part of PSSNa electrostatically interacted with each other to form a large aggregate. On the other hand, unlike the case of LAPHS micelles alone and the aggregate consisting of LAPHS micelles and PSSNa, the aggregate of LAPHS micelles and PMAPTAC showed an unprecedented phenomenon of "clear → opaque → clear" with increasing concentration in the concentration range above CMC. The change in the transition temperature due to the change of concentration was a factor. Additionally, we confirmed that the transition temperature was lowered when the concentration was higher than CMC or the salt concentration was increased, and the transition temperature was increased when the PMAPTAC with a high degree of polymerization was added. These results suggested that the LAPHS micelles and the ionic polymer form an aggregate, and the temperature responsivity can be expressed by the interaction with the cationic polymer.

Enrichment of Charged Monomers Explains Non-monotonic Polymer Volume Fraction Profiles of Multi-stimulus Responsive Copolymer Brushes

Multi-stimulus responsive poly(2-(2-methoxyethoxy)ethyl methacrylate-co-2-(diethylamino)ethyl methacrylate) [P(MEO₂MA-co-DEA)] 80:20 mol % copolymer brushes were synthesized on planar silica substrates via surface-initiated activators continuously regenerated via electron transfer atom transfer radical polymerization. Brush thickness was sensitive to changes in pH and temperature as monitored with ellipsometry. At low pH, the brush is charged and swollen, while at high pH, the brush is uncharged and more collapsed. Clear thermoresponsive behavior is also observed with the brush more swollen at low temperatures compared to high temperatures at both high and low pH. Neutron reflectometry was used to determine the polymer volume fraction profiles (VFPs) at various pH values and temperatures. A region of lower polymer content, or a depletion region, near the substrate is present in all of the experimental polymer VFPs, and it is more pronounced at low pH (high charge) and less so at high pH (low charge). Polymer VFPs calculated through numerical self-consistent field theory suggest that enrichment of DEA monomers near the substrate results in the experimentally observed non-monotonic VFPs. Adsorption of DEA monomers to the substrate prior to initiation of polymerization could give rise to DEA segment-enriched region proximal to the substrate.

Thermoresponsive Polymers of Poly(2-(N-alkylacrylamide)ethyl acetate)s

Thermoresponsive poly(2-(N-alkylacrylamide) ethyl acetate)s with different N-alkyl groups, including poly(2-(N-methylacrylamide) ethyl acetate) (PNMAAEA), poly(2-(N-ethylacrylamide) ethyl acetate) (PNEAAEA), and poly(2-(N-propylacrylamide) ethyl acetate) (PNPAAEA), as well as poly(N-acetoxylethylacrylamide) (PNAEAA), were synthesized by solution RAFT polymerization. Unexpectedly, it was found that there are induction periods in the RAFT polymerization of these monomers, and the induction time correlates with the length of the N-alkyl groups in the monomers and follows the order of NAEAA < NMAAEA < NEAAEA < NPAAEA. The solubility of poly(2-(N-alkylacrylamide) ethyl acetate)s in water is also firmly dependent on the length of the N-alkyl groups. PNPAAEA including the largest N-propyl group is insoluble in water, whereas PNMAAEA and PNEAAEA are thermoresponsive in water and undergo the reversible soluble-to-insoluble transition at a critical solution temperature. The cloud point temperature (Tcp) of the thermoresponsive polymers is in the order of PNEAAEA < PNAEAA < PNMAAEA. The parameters affecting the Tcp of thermoresponsive polymers, e.g., degree of polymerization (DP), polymer concentration, salt, urea, and phenol, are investigated. Thermoresponsive PNMAAEA-b-PNEAAEA block copolymer and PNMAAEA-co-PNEAAEA random copolymers with different PNMAAEA and/or PNEAAEA fractions are synthesized, and their thermoresponse is checked.

CO2-Gas-Responsive Liquid Marble

Liquid marbles were prepared using a water droplet and nonprotonated hydrophobic poly(2-N,N-diisopropylaminoethyl methacrylate) (PDiPAEMA) powder. Although the nonprotonated PDiPAEMA was hydrophobic, PDiPAEMA became hydrophilic because of the protonation of the pendant tertiary amino groups under acidic conditions. Therefore, liquid marbles stabilized with PDiPAEMA powder could float on a neutral to basic water surface, but they immediately disintegrated on an acidic water surface. Furthermore, the liquid marbles floating on the water surface disintegrated in response to CO₂ gas because the water became acidic as a result of carbonic acid formation.

Interplay of Composition, pH, and Temperature on the Conformation of Multi-stimulus-responsive Copolymer Brushes: Comparison of Experiment and Theory

Poly(2-(2-methoxyethoxy)ethyl methacrylate) (PMEO₂MA), a thermoresponsive polymer with a lower critical solution temperature of ∼28 °C, and poly(2-(diethylamino)ethyl methacrylate) (PDEA), a weak polybase with an apparent pK_a of ∼7.5, have been statistically copolymerized using activators continuously regenerated via electron transfer atom transfer radical polymerization to form multi-stimulus-responsive polymer brushes. The stimulus-responsive behavior of these brushes has been investigated with ellipsometry and numerical self-consistent field (nSCF) theory. The pH- and thermoresponsive behaviors of a PDEA homopolymer brush were investigated experimentally in order to benchmark the nSCF theory calculations. nSCF theory was able to reproduce the responsive behavior of PDEA and PMEO₂MA homopolymer brushes. Three copolymer compositions (90:10, 70:30, and 50:50 mol % MEO₂MA:DEA) were investigated experimentally with pH ramps performed at low and high temperatures and temperature ramps performed at low and high pH. A broader range of compositions were investigated with nSCF theory and compared to the experimental results, with the nSCF calculations able to capture the general behavior of the homopolymer and copolymer brushes. The responsive behavior of each brush to a given stimulus (temperature or pH) was dependent on both the polymer composition and environment (temperature or pH). The influence of pH on the brush increased with higher DEA mol % with a copolymer brush response transitioning from temperature-dominant to pH-dominant. The temperature response of PMEO₂MA was completely masked at low and high pH values by the presence of at least 30 mol % polybase in the copolymer.

Converting Poly(Methyl Methacrylate) into a Triple-Responsive Polymer

Multiresponsive polymers that can respond to several external stimuli are promising materials for a manifold of applications. Herein, a facile method for the synthesis of triple-responsive (pH, temperature, CO2 ) poly(N,N-diethylaminoethyl methacrylamide) by a post-polymerization amidation of poly(methyl methacrylate) (PMMA) is presented. Combined with trivalent counterions ([Fe(CN)6 ]3- ) both an upper and lower critical solution temperature (UCST/LCST)-type phase behavior can be realized at pH 8 and 9. PMMA and PMMA-based block copolymers are readily accessible by living anionic and controlled radical polymerization techniques, which opens access to various responsive polymer architectures based on the developed functionalization method. This method can also be applied on melt-processed bulk PMMA samples to introduce functional, responsive moieties at the PMMA surface.

Thermoresponsive Diblock Copolymer Films with a Linear Shrinkage Behavior and Its Potential Application in Temperature Sensors

The linear shrinkage behavior in thermoresponsive diblock copolymer films and its potential application in temperature sensors are investigated. The copolymer is composed of two thermoresponsive blocks with different transition temperatures (TTs): di(ethylene glycol) methyl ether methacrylate (MEO₂MA; TT₁ = 25 °C) and poly(ethylene glycol) methyl ether methacrylate (OEGMA₃₀₀; TT₂ = 60 °C) with a molar ratio of 1:1. Aqueous solutions of PMEO₂MA-b-POEGMA₃₀₀ show a three-stage transition upon heating as seen with optical transmittance and small-angle X-ray scattering: dissolution (T < TT₁), self-assembled micelles with core-shell structure (TT₁ < T < TT₂), and aggregation of collapsed micelles (T > TT₂). Due to the restrictions in the polymer chain arrangement introduced by the solid Si substrate, spin-coated PMEO₂MA-b-POEGMA₃₀₀ films exhibit an entirely different internal structure and transition behavior. Neutron reflectivity shows the absence of an ordered structure normal to the Si substrate in as-prepared PMEO₂MA-b-POEGMA₃₀₀ films. After exposure to D₂O vapor for 3 h and then increasing the temperature above its TT₁ and TT₂, the ordered structure is still not observed. Only a D₂O enrichment layer is formed close to the hydrophilic Si substrate. Such PMEO₂MA-b-POEGMA₃₀₀ films show a linear shrinkage between TT₁ and TT₂ in a D₂O vapor atmosphere. This special behavior can be attributed to the synergistic effect between the restrained collapse of the PMEO₂MA blocks by the still swollen POEGMA₃₀₀ blocks and the impedance of chain arrangement by the Si substrate. Based on this unique behavior, spin-coated PMEO₂MA-b-POEGMA₃₀₀ films are further prepared into a temperature sensor by implementing Ag electrodes. Its resistance decreases linearly with temperature between TT₁ and TT₂.

Thermoresponsive behavior of poly[trialkyl-(4-vinylbenzyl)ammonium] based polyelectrolytes in aqueous salt solutions

A systematic method to induce thermoresponsive behavior for polycations with salts from the reversed Hofmeister series is introduced.

Cargo shuttling by electrochemical switching of core-shell microgels obtained by a facile one-shot polymerization

Controlling and understanding the electrochemical properties of electroactive polymeric colloids is a highly topical but still a rather unexplored field of research. This is especially true when considering more complex particle architectures like stimuli-responsive microgels, which would entail different kinetic constraints for charge transport within one particle. We synthesize and electrochemically address dual stimuli responsive core-shell microgels, where the temperature-responsiveness modulates not only the internal structure, but also the microgel electroactivity both on an internal and on a global scale. In detail, a facile one-step precipitation polymerization results in architecturally advanced poly(N-isopropylacrylamide-co-vinylferrocene) P(NIPAM-co-VFc) microgels with a ferrocene (Fc)-enriched (collapsed/hard) core and a NIPAM-rich shell. While the remaining Fc units in the shell are electrochemically accessible, the electrochemical activity of Fc in the core is limited due to the restricted mobility of redox active sites and therefore restricted electron transfer in the compact core domain. Still, prolonged electrochemical action and/or chemical oxidation enable a reversible adjustment of the internal microgel structure from core-shell microgels with a dense core to completely oxidized microgels with a highly swollen core and a denser corona. The combination of thermo-sensitive and redox-responsive units being part of the network allows for efficient amplification of the redox response on the overall microgel dimension, which is mainly governed by the shell. Further, it allows for an electrochemical switching of polarity (hydrophilicity/hydrophobicity) of the microgel, enabling an electrochemically triggered uptake and release of active guest molecules. Hence, bactericidal drugs can be released to effectively kill bacteria. In addition, good biocompatibility of the microgels in cell tests suggests suitability of the new microgel system for future biomedical applications.

pH-Responsive Pickering Foams Generated by Surfactant-Free Soft Hydrogel Particles

Pickering foams are foams stabilized by particles and are generally known to have good stability. A special subclass of particle-stabilized foams includes stimuli-responsive Pickering foams that can be formed or deconstructed by applying an external stimuli or changing the environmental conditions; such intelligent particles could find use in many practical applications. Here, we synthesized surfactant-free biocompatible poly[2(diethylamino)ethyl methacrylate] (PDEAEMA) hydrogel particles (HGPs) by emulsion polymerization. The morphology, structure, and surface charge of the HGPs were characterized by TEM, DLS, and the zeta potential, respectively. We have observed that the pH values of the aqueous solution have a strong influence on the formation of the Pickering foams in the presence of PDEAEMA HGPs. Namely, at pH values ≤4.0 no Pickering foams were produced, while at pH values >4.0 stable Pickering foams were formed. Moreover, the height, size and bubble size distribution of Pickering foams are strongly influenced by the pH values of aqueous solution and PDEAEMA HGPs concentration. The formed Pickering foams in basic aqueous solution can all be conveniently deconstructed by changing the pH values to below 4.0. Interestingly, the dried lamellas of the Pickering foams were constituted by either monolayers or multilayers of PDEAEMA HGPs as demonstrated by SEM.

RAFT-mediated polymerisation of dialkylaminoethyl methacrylates in tert-butanol

Dialkylaminoethyl methacrylates were polymerised by RAFT in tert-butanol to make macro-chain transfer agents for subsequent grafting onto various substrates.

Balancing Segregation and Complexation in Amphiphilic Copolymers by Architecture and Confinement

Segregation is a well-known principle for micellization, as solvophobic components try to minimize interactions with other entities (such as solvent) by self-assembly. An opposite principle is based on complexation (or coacervation), leading to the coassembly/association of different components. Most cases in the literature rely on only one of these modes, though the classical micellization scheme (such as spherical micelles, wormlike micelles, and vesicles) can be enriched by a subtle balance of segregation and complexation. Because of their counteraction, micellar constructs with unprecedented structure and behavior could be obtained. In this feature, systems are highlighted, which are between both mechanisms, and we study concentration, architecture, and confinement effects. Systems with inter- and intramolecular interactions are presented, and the effects of polymer topology and monomer sequence on the resulting structures are discussed. It is shown that complexation can lead to altered micellization behavior as the complex of one hydrophobic and one hydrophilic component can have a very low surface tension toward the solvent. Then, the more soluble component is enriched at the surface of the complex and acts as a microsurfactant. Although segregation dominates for amphiphilic copolymers in solution, the effect of the complexation can be enhanced by branching (change of architecture). Another possibility to enhance the complexation is by confining copolymers in a (pseudo-) 2D environment (like the one available at liquid-liquid interfaces). These observations show how new structural features can be achieved by tuning the subtle balance between segregation and complexation/solubilization.