Toxicological effect of ZnO nanoparticles based on bacteria

Passivation of metal sulfides by a marine bacterium for acid mine drainage control

Acid mine drainage originates from metal sulfides oxidation, which results in acidic metal-rich leachate. In this study, a novel and environmentally friendly approach was demonstrated to passivate pyrite and lead-zinc tailings, respectively. The key to this approach is to develop biofilms of the marine bacterium Qipengyuania flava S1. Biofilms can induce biomineralization, thereby isolating metal sulfides from air and water. The stability and biological toxicity of the bio-passivation layers were evaluated by leaching bio-passivated pyrite or tailings in initially acidic H2O2 solutions with shaking for 180 days and then cultivating Brassica chinensis and Allium cepa with the leachates. Our results showed that after passivation, the amount of iron released by pyrite decreased by at least 99.2 ± 0.2 (in wt%). For lead-zinc tailings after passivation, the released metal ions (Fe+Al+Pb+Zn) decreased by at least 52.0 ± 3.2 (in wt%). The bio-passivation layers also maintained the pH of the leachate in the range of 7.5-8.0. Before bio-passivation, compared with mineral water, the pyrite leachate significantly inhibited the growth of the two plants, and the tailings leachate significantly inhibited the growth of A. cepa, whereas the bio-passivated pyrite or tailings leachate did not show any inhibitory effect.

Titanium Dioxide Nanoparticle: A Comprehensive Review on Synthesis, Applications and Toxicity

Nanotechnology has garnered significant interest worldwide due to its wide-ranging applications across various industries. Titanium dioxide nanoparticles are one type of nanoparticle that is commonly utilised in everyday use and can be synthesized by different techniques using physical, chemical and biological extracts. Green synthesis is an economical, environmentally benign and non-toxic method of synthesising nanoparticles. Titanium dioxide nanoparticles have a positive impact on plant physiology, particularly in response to biotic and abiotic stresses, depending on various factors like size, concentration, exposure of the nanoparticles and other variables. Further, titanium dioxide nanoparticles have many applications, such as being used as nano-fertilizers, adsorption of heavy metal from industrial wastewater and antimicrobial activity, as discussed in this review paper. Previous studies investigated whether titanium dioxide nanoparticles also induce genotoxicity may be due to mishandling procedure, exposure time, size, concentration and other variables. This is still contradictory and requires more research. The present review is a pragmatic approach to summarize the synthesis, application, nanotoxicity, genotoxicity and eco-friendly method of nanoparticle synthesis and disposable.

Effects of Zinc Oxide Nanoparticles (ZnO NPs) on Growth, Immune Responses and Histopathological Alterations in Asian Seabass (Lates calcarifer, Bloch 1790) under Low-Salinity Conditions

In the present study, Asian seabass (Lates calcarifer, Bloch) fingerings were used as an animal model to investigate the toxicological effects of zinc oxide nanoparticles (ZnO NPs) under 5 ppt estuarine conditions. The fish were exposed to 0, 1, 5 or 50 ppm ZnO NPs for 8 weeks. It was found that ZnO NP concentrations of 5-50 ppm negatively affected several growth rate parameters, such as the weight and total length of the fish. Additionally, 5 and 50 ppm ZnO NPs led to 32.55% and 100% mortality, respectively, after 8 weeks after exposure (WAE). Furthermore, compared with the control, exposure to 1-50 ppm ZnO NPs strongly affected hematological indices, such as total blood cells, red blood cells, leukocytes and hematocrit, and suppressed lysozyme activity, superoxide anion production and bactericidal activity. High Zn concentrations accumulated in the head kidney, gills and liver, whereas low levels were detected in the gut, skin and muscle. Expression analysis of immune-related genes via quantitative real-time RT-PCR revealed that 5 and 50 ppm ZnO NPs significantly upregulated the cc and cd4 genes at 1 WAE. In contrast, 50 ppm ZnNPs downregulated the expression levels of the cd8, cc, hsp70, hsp90, tcrα, lyz and igmh genes at 1 WAE (p < 0.05). Finally, at 8 WAE, histopathological analysis revealed that 5 and 50 ppm ZnO NPs severely induced alterations in the head kidney, gills and liver.

Assessment of Antimicrobial Activity of Chitosan, ZnO, and Urtica dioica-ZnO NPs Against Staphylococcus aureus Isolated from Diabetic Ulcers

Staphylococcus aureus (S. aureus) is considered as one of the challenging ulcer infections in diabetic patients especially those who have acquired antibiotic-resistant infections. Nanotechnology products have enormous potential to treat diseases including infectious diseases. As chitosan and zinc oxide (ZnO) nanoparticles (NPs) have harbored a high antimicrobial effect, this survey was aimed to synthesize chitosan, ZnO, and ZnO-Urtica. diocia (ZnO-U. diocia) NPs, and to assess their antimicrobial effects and their influence on virulence genes expression in S. aureus isolates from diabetic ulcers. The antibacterial effect of NPs was detected by microdilution method. The most frequently components in U. diocia aqueous extract were linalool,4-thujanol, camphor, carvacrol, propanedioic acid, and di(butyl) phthalate. More than 95% of clinical S. aureus isolates were resistant to several antibiotics including erythromycin, cefoxitin, clindamycin, and ciprofloxacin. The most resistant isolates were S. aureus ATDS 52, ATDS 53, F5232, and F91. The lowest MIC and MBC by the NPs on the isolates was detected as 0.128 g/mL and 0.178 g/mL, respectively. A significant decrease of 90% in the expression rates of lukED and RNAIII genes was reported for S. aureus isolates treated with the NPs. The synthetized ZnO-U. diocia and chitosan NPs can be proposed as a reliable and effective antimicrobial agent targeting diabetic ulcers infections caused by S. aureus because of its high effects on the bacterial growth and virulence genes expression.

Unleashing the promise of emerging nanomaterials as a sustainable platform to mitigate antimicrobial resistance

The emergence and spread of antibiotic-resistant (AR) bacterial strains and biofilm-associated diseases have heightened concerns about exploring alternative bactericidal methods. The WHO estimates that at least 700 000 deaths yearly are attributable to antimicrobial resistance, and that number could increase to 10 million annual deaths by 2050 if appropriate measures are not taken. Therefore, the increasing threat of AR bacteria and biofilm-related infections has created an urgent demand for scientific research to identify novel antimicrobial therapies. Nanomaterials (NMs) have emerged as a promising alternative due to their unique physicochemical properties, and ongoing research holds great promise for developing effective NMs-based treatments for bacterial and viral infections. This review aims to provide an in-depth analysis of NMs based mechanisms combat bacterial infections, particularly those caused by acquired antibiotic resistance. Furthermore, this review examines NMs design features and attributes that can be optimized to enhance their efficacy as antimicrobial agents. In addition, plant-based NMs have emerged as promising alternatives to traditional antibiotics for treating multidrug-resistant bacterial infections due to their reduced toxicity compared to other NMs. The potential of plant mediated NMs for preventing AR is also discussed. Overall, this review emphasizes the importance of understanding the properties and mechanisms of NMs for the development of effective strategies against antibiotic-resistant bacteria.

Nanoemulsions: Summary of a Decade of Research and Recent Advances

Nanoemulsions consist of a combination of several components such as oil, water, emulsifiers, surfactants and cosurfactants. Various techniques for producing nanoemulsions include high-energy and low-energy approaches such as high-pressure homogenization, microfluidization, jet disperser and phase inversion methods. The properties of a formulation can be influenced by elements such as the composition, concentration, size and charge of droplets, which in turn can affect the technique of manufacture. Characterization is conducted by the assessment of several factors such as physical properties, pH analysis, viscosity measurement and refractive index determination. This article offers a thorough examination of the latest developments in nanoemulsion technology, with a focus on their wide-ranging applications and promising future possibilities. It also discusses the administration of nanoemulsions through several methods.

Metal Nanoparticles: Advanced and Promising Technology in Diabetic Wound Therapy

Diabetic wounds pose a significant challenge to public health, primarily due to insufficient blood vessel supply, bacterial infection, excessive oxidative stress, and impaired antioxidant defenses. The aforementioned condition not only places a significant physical burden on patients' prognosis, but also amplifies the economic strain on the medical system in treating diabetic wounds. Currently, the effectiveness of available treatments for diabetic wounds is limited. However, there is hope in the potential of metal nanoparticles (MNPs) to address these issues. MNPs exhibit excellent anti-inflammatory, antioxidant, antibacterial and pro-angiogenic properties, making them a promising solution for diabetic wounds. In addition, MNPs stimulate the expression of proteins that promote wound healing and serve as drug delivery systems for small-molecule drugs. By combining MNPs with other biomaterials such as hydrogels and chitosan, novel dressings can be developed and revolutionize the treatment of diabetic wounds. The present article provides a comprehensive overview of the research progress on the utilization of MNPs for treating diabetic wounds. Building upon this foundation, we summarize the underlying mechanisms involved in diabetic wound healing and discuss the potential application of MNPs as biomaterials for drug delivery. Furthermore, we provide an extensive analysis and discussion on the clinical implementation of dressings, while also highlighting future prospects for utilizing MNPs in diabetic wound management. In conclusion, MNPs represent a promising strategy for the treatment of diabetic wound healing. Future directions include combining other biological nanomaterials to synthesize new biological dressings or utilizing the other physicochemical properties of MNPs to promote wound healing. Synthetic biomaterials that contain MNPs not only play a role in all stages of diabetic wound healing, but also provide a stable physiological environment for the wound-healing process.

Postbiotic as Novel Alternative Agent or Adjuvant for the Common Antibiotic Utilized in the Food Industry

BACKGROUND

Antibiotic resistance is a serious public health problem as it causes previously manageable diseases to become deadly infections that can cause serious disability or even death. Scientists are creating novel approaches and procedures that are essential for the treatment of infections and limiting the improper use of antibiotics in an effort to counter this rising risk.

OBJECTIVES

With a focus on the numerous postbiotic metabolites formed from the beneficial gut microorganisms, their potential antimicrobial actions, and recent associated advancements in the food and medical areas, this review presents an overview of the emerging ways to prevent antibiotic resistance.

RESULTS

Presently, scientific literature confirms that plant-derived antimicrobials, RNA therapy, fecal microbiota transplantation, vaccines, nanoantibiotics, haemofiltration, predatory bacteria, immunotherapeutics, quorum-sensing inhibitors, phage therapies, and probiotics can be considered natural and efficient antibiotic alternative candidates. The investigations on appropriate probiotic strains have led to the characterization of specific metabolic byproducts of probiotics named postbiotics. Based on preclinical and clinical studies, postbiotics with their unique characteristics in terms of clinical (safe origin, without the potential spread of antibiotic resistance genes, unique and multiple antimicrobial action mechanisms), technological (stability and feasibility of largescale production), and economic (low production costs) aspects can be used as a novel alternative agent or adjuvant for the common antibiotics utilized in the production of animal-based foods.

CONCLUSION

Postbiotic constituents may be a new approach for utilization in the pharmaceutical and food sectors for developing therapeutic treatments. Further metabolomics investigations are required to describe novel postbiotics and clinical trials are also required to define the sufficient dose and optimum administration frequency of postbiotics.

Electrodeposited Zinc Coatings for Biomedical Application: Morphology, Corrosion and Biological Behaviour

The improvement of biodegradable metals is currently an active and promising research area for their capabilities in implant manufacturing. However, controlling their degradation rate once their surface is in contact with the physiological media is a challenge. Surface treatments are in the way of addressing the improvement of this control. Zinc is a biocompatible metal present in the human body as well as a metal widely used in coatings to prevent corrosion, due to its well-known metal protective action. These two outstanding characteristics make zinc coating worthy of consideration to improve the degradation behaviour of implants. Electrodeposition is one of the most practical and common technologies to create protective zinc coatings on metals. This article aims to review the effect of the different parameters involved in the electrochemical process on the topography and corrosion characteristics of the zinc coating. However, certainly, it also provides an actual and comprehensive description of the state-of-the-art of the use of electrodeposited zinc for biomedical applications, focusing on their capacity to protect against bacterial colonization and to allow cell adhesion and proliferation.

Recent development of metal oxides and chalcogenides as antimicrobial agents

Pathogenic microbes are a major concern in hospitals and other healthcare facilities because they affect the proper performance of medical devices, surgical devices, etc. Due to the antimicrobial resistance or multidrug resistance, combatting these microbial infections has grown to be a significant research area in science and medicine as well as a critical health concern. Antibiotic resistance is where microbes acquire and innately exhibit resistance to antimicrobial agents. Therefore, the development of materials with promising antimicrobial strategy is a necessity. Amongst other available antimicrobial agents, metal oxide and chalcogenide-based materials have shown to be promising antimicrobial agents due to their inherent antimicrobial activity as well as their ability to kill and inhibit the growth of microbes effectively. Moreover, other features including the superior efficacy, low toxicity, tunable structure, and band gap energy has makes metal oxides (i.e. TiO₂, ZnO, SnO₂ and CeO₂ in particular) and chalcogenides (Ag₂S, MoS₂, and CuS) promising candidates for antimicrobial applications as illustrated by examples discussed in this review.

Inhibition of Adherence and Biofilm Formation of Pseudomonas aeruginosa by Immobilized ZnO Nanoparticles on Silicone Urinary Catheter Grafted by Gamma Irradiation

Nosocomial infections caused by microbial biofilm formation on biomaterial surfaces such as urinary catheters are complicated by antibiotic resistance, representing a common problem in hospitalized patients. Therefore, we aimed to modify silicone catheters to resist microbial adherence and biofilm formation by the tested microorganisms. This study used a simple direct method to graft poly-acrylic acid onto silicone rubber films using gamma irradiation to endow the silicone surface with hydrophilic carboxylic acid functional groups. This modification allowed the silicone to immobilize ZnO nanoparticles (ZnO NPs) as an anti-biofilm. The modified silicone films were characterized by FT-IR, SEM, and TGA. The anti-adherence ability of the modified silicone films was evidenced by the inhibition of biofilm formation by otherwise strong biofilm-producing Gram-positive, Gram-negative, and yeast clinical isolates. The modified ZnO NPs grafted silicone showed good cytocompatibility with the human epithelial cell line. Moreover, studying the molecular basis of the inhibitory effect of the modified silicone surface on biofilm-associated genes in a selected Pseudomonas aeruginosa isolate showed that anti-adherence activity might be due to the significant downregulation of the expression of lasR, lasI, and lecB genes by 2, 2, and 3.3-fold, respectively. In conclusion, the modified silicone catheters were low-cost, offering broad-spectrum anti-biofilm activity with possible future applications in hospital settings.

Do silver/hydroxyapatite and zinc oxide nano-coatings improve inflammation around titanium orthodontic mini-screws? In vitro study

BACKGROUND

Overcoming the failure percentage of orthodontic mini-screws (OMSs), which is about 30% of overall orthodontic cases, especially in malocclusion treatment that requires orthopaedic heavy forces, is a great challenge. Bacterial infections, soft tissue and bone inflammation, and weak connections between bones and the OMS surface are among the main causalities of this failure.

OBJECTIVE

The aim of the study is to evaluate in vitro the microbiological activities of the deposited nanomaterials (Silver/hydroxyapatite nanoparticles (Ag/HA NPs) and zinc oxide nanoparticles (ZnO NPs)) in terms of microbial inhibition. In addition, the in-vitro cytotoxicity and cytocompatibility of the synthesized nano-coatings prior to their in-vivo application in animal models were tested on four types of cells, namely, fibroblasts, osteocytes, osteoblasts, and oral epithelial cells.

MATERIALS AND METHODS

Ag/HA NPs and ZnO NPs were built up onto the surface of titanium OMSs by electrochemical deposition. This electrochemical deposition was performed on 50 orthodontic mini screws and the deposited materials were characterized with the aid of scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) analysis, X-ray Diffraction (XRD) and nano-scratch test. In addition, the microbiological activities of the deposited nanomaterials were explored in vitro in terms of microbial inhibition. Furthermore, the cytotoxicity and cytocompatibility were tested on four types of cells, namely, fibroblasts, osteocytes, osteoblasts and oral epithelial cells.

RESULTS

SEM images revealed spherical Ag NPs in the range of 40-70nm in diameter, rod-shaped HA NPs and porous scaly ZnO NPs on the surface of the OMSs. XRD analysis confirmed the crystal structures of AgNPs, HA NPs, and ZnO NPs. ZnO NPs coated OMS had the highest antimicrobial activity than Ag/HA coated OMS against Gram-positive, Gram-negative and fungal strains. Moreover, after incubation, the decrease in the number of bacterial colonies was significant with ZnO and Ag/HA nanoparticles (with the greatest decrease for the former), due to the potent antibacterial effect of nanoparticles against Escherichia coli and Enterococcus faecalis. Moreover, ZnO NPs-coated OMSs showed a better cytocompatibility with oral epithelium, bone cells, and fibroblasts compared to Ag/HA NPs.

CONCLUSION

The suggested nanocoating is a promising strategy to overcome the development of an inflammatory zone around the fixed OMSs.

Structural and antibacterial studies of novel ZnO and ZnxMn(1-x)O nanostructured titanium scaffolds for biomedical applications

In the biomedical field, the demand for the development of broad-spectrum biomaterials able to inhibit bacterial growth is constantly increasing. Chronic infections represent the most serious and devastating complication related to the use of biomaterials. This is particularly relevant in the orthopaedic field, where infections can lead to implant loosening, arthrodesis, amputations and sometimes death. Antibiotics are the conventional approach for implanted-associated infections, but they have the limitation of increasing antibiotic resistance, a critical worldwide healthcare issue. In this context, the development of anti-infective biomaterials and infection-resistant surfaces can be considered the more effective strategy to prevent the implant colonisation and biofilm formation by bacteria, so reducing the occurrence of implant-associated infections. In the last years, inorganic nanostructures have become extremely appealing for chemical modifications or coatings of Ti surfaces, since they do not generate antibiotic resistance issues and are featured by superior stability, durability, and full compatibility with the sterilization process. In this work, we present a simple, rapid, and cheap chemical nanofunctionalization of titanium (Ti) scaffolds with colloidal ZnO and Mn-doped ZnO nanoparticles (NPs), prepared by a sol-gel method, exhibiting antibacterial activity. ZnO NPs and Zn_xMn_(1-x)O NPs formation with a size around 10-20nm and band gap values of 3.42 eV and 3.38 eV, respectively, have been displayed by characterization studies. UV-Vis, fluorescence, and Raman investigation suggested that Mn ions acting as dopants in the ZnO lattice. Ti scaffolds have been functionalized through dip coating, obtaining ZnO@Ti and Zn_xMn_(1-x)O@Ti biomaterials characterized by a continuous nanostructured film. ZnO@Ti and Zn_xMn_(1-x)O@Ti displayed an enhanced antibacterial activity against both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Pseudomonas aeruginosa (P. aeruginosa) bacterial strains, compared to NPs in solution with better performance of Zn_xMn_(1-x)O@Ti respect to ZnO@Ti. Notably, it has been observed that Zn_xMn_(1-x)O@Ti scaffolds reach a complete eradication for S. aureus and 90 % of reduction for P. aeruginosa. This can be attributed to Zn²⁺ and Mn²⁺ metal ions release (as observed by ICP MS experiments) that is also maintained over time (72 h). To the best of our knowledge, this is the first study reported in the literature describing ZnO and Mn-doped ZnO NPs nanofunctionalized Ti scaffolds with improved antibacterial performance, paving the way for the realization of new hybrid implantable devices through a low-cost process, compatible with the biotechnological industrial chain method.

Nanomedicine: New Frontiers in Fighting Microbial Infections

Microbes have dominated life on Earth for the past two billion years, despite facing a variety of obstacles. In the 20th century, antibiotics and immunizations brought about these changes. Since then, microorganisms have acquired resistance, and various infectious diseases have been able to avoid being treated with traditionally developed vaccines. Antibiotic resistance and pathogenicity have surpassed antibiotic discovery in terms of importance over the course of the past few decades. These shifts have resulted in tremendous economic and health repercussions across the board for all socioeconomic levels; thus, we require ground-breaking innovations to effectively manage microbial infections and to provide long-term solutions. The pharmaceutical and biotechnology sectors have been radically altered as a result of nanomedicine, and this trend is now spreading to the antibacterial research community. Here, we examine the role that nanomedicine plays in the prevention of microbial infections, including topics such as diagnosis, antimicrobial therapy, pharmaceutical administration, and immunizations, as well as the opportunities and challenges that lie ahead.

Effects of nZnS vs. nZnO and ZnCl2 on mungbean [Vigna radiata (L.) R. Wilczek] plant and Bradyrhizobium symbiosis: A life cycle study

Scarce of knowledge of using Zinc (Zn) nanoparticles (NPs) to augment plant growth, Zn availability to plants and its potential toxicity warrants more NPs-plant life cycle studies. The main objectives of this study were to compare nano zinc sulphide (nZnS) with nano zinc oxide (nZnO) and ionic Zn i.e., ZnCl₂, as a source of Zn, as well as to establish physiological impact of NPs on growth, yield and symbiosis of mungbean [Vigna radiata (L.) R. Wilczek] plants at different concentrations (0, 0.01, 0.1, 1 and 10 mg kg^-1 of soil). In this study, mungbean plants were grown for 60 days (life cycle study) in natural soil infested with Bradyrhizobium. Effects of Zn compounds (nZnS, nZnO and ZnCl₂) on plant height, dry biomass, number of nodules per plant, yield and fruit agronomical parameters along with micronutrient assessment were determined. Impact of Zn compounds on Bradyrhizobium-mungbean symbiosis was also unravelled. Results showed that both the NPs, (nZnS and nZnO) were more effective than ZnCl₂ in promoting growth and yield up to a critical concentration and above which phytotoxic effects were observed. Both the NPs were more effective than ZnCl₂ at increasing fruit Zn content also. Whereas, nZnS treatment was found to be better than nZnO in improving overall plant growth. Bradyrhizobium-mungbean symbiosis was not affected at lower NPs concentrations, while higher concentration revealed toxicity by damaging bacterial morphology and nodule formation. There was no nano specific toxicity found while, ZnCl₂ showed relatively more toxicity than both the NPs. The present investigation demonstrated the concept of nano-micronutrient as well as NPs phytotoxicity by understanding NPs-plant interactions in the soil environment.

In Vitro Evaluation of Zinc Oxide Tetrapods as a New Material Component for Glaucoma Implants

In our previous study we were able to show that zinc oxide (ZnO) tetrapods inhibit wound healing processes. Therefore, the aim of this study was to test the antiproliferative effect of two types of porous polydimethylsiloxane (PDMS)/ tetrapodal zinc oxide (ZnO-T) materials, as well as their usability for glaucoma implants. To find the best implant material, two different porous PDMS/ZnO-T materials were examined. One consisted of 3D interconnected PDMS coarse-pored foams with protruding ZnO-T particles; the other consisted of fine-pored 3D interconnected ZnO-T networks homogeneously coated by a thin PDMS film in the nanometer range. Fibroblast cell viability was investigated for both materials via MTT dye, and some implant material samples were further processed for electron microscopy. Both PDMS/ZnO-T materials showed reduced cell viability in the MTT staining. Furthermore, the electron microscopy revealed barely any fibroblasts growing on the implant materials. At the surface of the fine-pored implant material, however, fibroblasts could not be observed in the etched control samples without ZnO-T. It was found that post-processing of the material to the final stent diameter was highly challenging and that the fabrication method, therefore, had to be adapted. In conclusion, we were able to demonstrate the antiproliferative potential of the two different PDMS/ZnO-T materials. Furthermore, smaller pore size (in the range of tens of micrometers) in the implant material seems to be preferable.

Antimicrobial photodynamic inactivation of wastewater microorganisms by halogenated indole derivative capped zinc oxide

Novel 5-bromoindole (5B)-capped zinc oxide (ZnO) nanoparticles (5BZN) were synthesized to improve the antibacterial, antibiofilm, and disinfection processes for the control of microorganisms in wastewater treatment. When exposed to 5BZN, the biofilm density and cell attachment were reduced dramatically, as measured by scanning electron microscopy (SEM). The 5BZN were also investigated for photodynamic treatment of multidrug-resistant (MDR) bacteria and toxicity. The combination of 5B and ZnO exhibited strong antibacterial and antibiofilm activities against MDR bacteria even at low doses (20 μg/mL). After 12.5 mW/cm² blue LED irradiation, the composite 5BZN showed superior photodynamic inactivation of two wastewater MDR, Enterobacter tabaci E2 and Klebsiella quasipneumoniae SC3, with cell densities reduced by 3.9 log CFU/mL and 4.7 log CFU/mL, respectively, after 120 min. The mechanism of bacterial inactivation was studied using a scavenging investigation, and H₂O₂ was identified mainly as the reactive species for bacterial inactivation. The 5BZN exhibited higher photodynamic inactivation towards the total coliform bacteria in wastewater effluents under a blue LED light intensity of 12.5 mW/cm² with almost complete inactivation of the coliform bacteria cells within 40 min. Furthermore, when 5BZN (100 mg/L) was added to the reactor, the level of tetracycline antibiotic degradation was increased by 63.6% after 120 min. The toxicity test, animal model nematode studies and seed germination assays, showed that 5BZN is harmless, highlighting its tremendous potential as a self-healing agent in large-scale photodynamic disinfection processes.

Synthesis of ZnO/Au Nanocomposite for Antibacterial Applications

Annually, antimicrobial-resistant infections-related mortality worldwide accelerates due to the increased use of antibiotics during the coronavirus pandemic and the antimicrobial resistance, which grows exponentially, and disproportionately to the current rate of development of new antibiotics. Nanoparticles can be an alternative to the current therapeutic approach against multi-drug resistance microorganisms caused infections. The motivation behind this work was to find a superior antibacterial nanomaterial, which can be efficient, biocompatible, and stable in time. This study evaluated the antibacterial activity of ZnO-based nanomaterials with different morphologies, synthesized through the solvothermal method and further modified with Au nanoparticles through wet chemical reduction. The structure, crystallinity, and morphology of ZnO and ZnO/Au nanomaterials have been investigated with XRD, SEM, TEM, DLS, and FTIR spectroscopy. The antibacterial effect of unmodified ZnO and ZnO/Au nanomaterials against Escherichia coli and Staphylococcus aureus was investigated through disc diffusion and tetrazolium/formazan (TTC) assays. The results showed that the proposed nanomaterials exhibited significant antibacterial effects on the Gram-positive and Gram-negative bacteria. Furthermore, ZnO nanorods with diameters smaller than 50 nm showed better antibacterial activity than ZnO nanorods with larger dimensions. The antibacterial efficiency against Escherichia coli and Staphylococcus aureus improved considerably by adding 0.2% (w/w) Au to ZnO nanorods. The results indicated the new materials' potential for antibacterial applications.

Zinc Oxide Tetrapods Modulate Wound Healing and Cytokine Release In Vitro-A New Antiproliferative Substance in Glaucoma Filtering Surgery

Glaucoma filtering surgery is applied to reduce intraocular pressure (IOP) in cases of uncontrolled glaucoma. However, postoperative fibrosis reduces the long-term success of both standard trabeculectomy and microstents. The aim of this study was to test the antiproliferative and anti-inflammatory potential of ZnO-tetrapods (ZnO-T) on human Tenon's fibroblasts (HTFs) for glaucoma surgery. The toxicity of ZnO-T on HTFs was determined using an MTT test. For analysis of fibroblast proliferation, migration, and transdifferentiation, cultures were stained for Ki67, alpha-smooth muscle actin (α-SMA), and p-SMAD. A fully quantitative multiplex ELISA was used to determine the concentrations of different cytokines, platelet-derived growth factor (PDGF), and hepatocyte growth factor (HGF) in culture supernatants with and without previous ZnO-T treatment. Treatment with higher concentrations (10 and 20 µg/mL) was associated with HTF toxicity, as shown in the wound healing assay. Furthermore, the number of Ki67, α-SMA-positive, and pSMAD-positive cells, as well as IL-6 and HGF in supernatants, were significantly reduced following incubation with ZnO-T. In conclusion, we were able to show the antiproliferative and anti-inflammatory potentials of ZnO-T. Therefore, the use of ZnO-T may provide a new approach to reducing postoperative fibrosis in glaucoma filtering surgery.

Green synthesis of zinc oxide nanoparticles toward highly efficient photocatalysis and antibacterial application

Zinc oxide nanoparticles (ZnO NPs) were successfully synthesized by a green method using rosin and zinc chloride as salt precursors. The phase structure, morphology, and particle size of ZnO were determined by X-ray powder diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy. The fabricated ZnO NP samples are crystalline with a grain size of 30-100 nm. The ZnO NPs were used as catalysts for the photodegradation of methylene blue (MB) and methyl orange (MO) under visible and UV light. The results indicate that the prepared ZnO material excellently removed MB and MO (c _initial = 10 mg/L) with efficiencies of 100% and 82.78%, respectively, after 210 min under UV radiation with a ZnO NP dose of 2 g/L. The photocatalyst activity of the synthesized material was also tested under visible light radiation with the same conditions; however, it achieved lower efficiencies. In addition, ZnO NPs were also tested regarding their antibacterial activity, and the results showed that the prepared ZnO samples had the highest (i.e., 100%) antibacterial efficiency against E. coli.

Bioengineering Approaches to Fight against Orthopedic Biomaterials Related-Infections

One of the most serious complications following the implantation of orthopedic biomaterials is the development of infection. Orthopedic implant-related infections do not only entail clinical problems and patient suffering, but also cause a burden on healthcare care systems. Additionally, the ageing of the world population, in particular in developed countries, has led to an increase in the population above 60 years. This is a significantly vulnerable population segment insofar as biomaterials use is concerned. Implanted materials are highly susceptible to bacterial and fungal colonization and the consequent infection. These microorganisms are often opportunistic, taking advantage of the weakening of the body defenses at the implant surface–tissue interface to attach to tissues or implant surfaces, instigating biofilm formation and subsequent development of infection. The establishment of biofilm leads to tissue destruction, systemic dissemination of the pathogen, and dysfunction of the implant/bone joint, leading to implant failure. Moreover, the contaminated implant can be a reservoir for infection of the surrounding tissue where microorganisms are protected. Therefore, the biofilm increases the pathogenesis of infection since that structure offers protection against host defenses and antimicrobial therapies. Additionally, the rapid emergence of bacterial strains resistant to antibiotics prompted the development of new alternative approaches to prevent and control implant-related infections. Several concepts and approaches have been developed to obtain biomaterials endowed with anti-infective properties. In this review, several anti-infective strategies based on biomaterial engineering are described and discussed in terms of design and fabrication, mechanisms of action, benefits, and drawbacks for preventing and treating orthopaedic biomaterials-related infections.

ZnO-based antimicrobial coatings for biomedical applications

Rapid transmission of infectious microorganisms such as viruses and bacteria through person-to-person contact has contributed significantly to global health issues. The high survivability of these microorganisms on the material surface enumerates their transmissibility to the susceptible patient. The antimicrobial coating has emerged as one of the most interesting technologies to prevent growth and subsequently kill disease-causing microorganisms. It offers an effective solution a non-invasive, low-cost, easy-in-use, side-effect-free, and environmentally friendly method to prevent nosocomial infection. Among antimicrobial coating, zinc oxide (ZnO) stands as one of the excellent materials owing to zero toxicity, high biocompatibility to human organs, good stability, high abundancy, affordability, and high photocatalytic performance to kill various infectious pathogens. Therefore, this review provides the latest research progress on advanced applications of ZnO nanostructure-based antibacterial coatings for medical devices, biomedical applications, and health care facilities. Finally, future challenges and clinical practices of ZnO-based antibacterial coating are addressed.

Photo-oxygenation of water media using photoactive plasmonic nanocomposites

Plasmonic nanocomposites ZnO–Ag and ZnO–SnO2–Ag(AgCl) were prepared by the polymer–salt method, and their structure and morphology were studied using XRD and SEM analyses. It was found that the addition of photoactive inorganic nanocomposites ZnO–Ag and ZnO–SnO2–Ag(AgCl) in pure water significantly enhances the effectiveness of its disinfection and purification during UV treatment and provides the effective water oxygenation. Oxygen photogeneration under blue light (λex. = 405 nm) can be related to the plasmon-excitation processes in ZnO–SnO2–Ag(AgCl) composites. Prepared composites demonstrate antibacterial activity against both Gram-positive and Gram-negative bacteria. The increase of Ag content in ZnO–Ag and ZnO–SnO2–Ag(AgCl) composites significantly enhances their antibacterial activity.

Novel Bioengineered Antibacterial and Anticancer ZnO Nanoparticles

Transition metal oxide NPs have delivered wide applications in various fields. Therefore, in this study, a novel fungus, Alternaria sp. (NCBI Accession No: MT982648) was isolated and characterized from the vicinity of medicinal plants. Eventually, in this method extracted proteins from isolated fungus were utilized to synthesize highly biocompatible zinc nanoparticles (ZnO NPs). The various physical techniques including UV-visible spectroscopy, TEM, HR-TEM, XRD, DLS, zeta potential, and FTIR were used to characterize particles. The UV-visible absorption (λ_Max) and binding energy for the as-synthesized particles were found to be 329 nm and 3.91 eV, respectively. Further, the polydispersed particles were revealed to have regular crystallinity with hexagonal wurtzite phase of ZnO with the spacing of ~2.46 Å under XRD and HR-TEM. The average size of a particle under TEM was found to be ~18 nm. The evaluation of various surface functional groups of particles was done by FTIR. The average hydrodynamic diameter of particles was found to be ~57 d. nm with 0.44 particle distribution index whereas the nanoemulsion stability was explained by Zeta potential (-9.47 mV). These particles were found to exhibit potential antibacterial and anticancer activities. They were found to be bactericidal against S. abony (MIC 5.73 μg/mL); B. pumilis (MIC 6.64 μg/mL); K. pneumonia (MIC 14.4 μg/mL); E. coli (MIC 8.7 μg/mL); B. subtilis (MIC 5.63 μg/mL) and S. aureus (MIC 12.04 μg/mL). Further, they are also found to be concentration-dependent anticancer and inhibited the growth of A549 cells (IC₅₀-65.3 μg/mL) whereas they were found to demonstrate no any cytotoxicity against NRK normal kidney cell line. The internalization of particles into the nucleus (i.e., nuclear fragmentation and DNA damage) was confirmed by DAPI staining. The intracellular particles were found to generate excessive ROS. Further, the anticancer potential was also estimated by noticing a hike in oxidative stress parameters, cell viability, cell morphology, and change in mitochondrial membrane potential. We effectively synthesized potentially potent antibacterial and anticancer novel bioengineered ZnO NPs.

Exploring the Journey of Zinc Oxide Nanoparticles (ZnO-NPs) toward Biomedical Applications

The field of nanotechnology is concerned with the creation and application of materials having a nanoscale spatial dimensioning. Having a considerable surface area to volume ratio, nanoparticles have particularly unique properties. Several chemical and physical strategies have been used to prepare zinc oxide nanoparticles (ZnO-NPs). Still, biological methods using green or natural routes in various underlying substances (e.g., plant extracts, enzymes, and microorganisms) can be more environmentally friendly and cost-effective than chemical and/or physical methods in the long run. ZnO-NPs are now being studied as antibacterial agents in nanoscale and microscale formulations. The purpose of this study is to analyze the prevalent traditional method of generating ZnO-NPs, as well as its harmful side effects, and how it might be addressed utilizing an eco-friendly green approach. The study's primary focus is on the potential biomedical applications of green synthesized ZnO-NPs. Biocompatibility and biomedical qualities have been improved in green-synthesized ZnO-NPs over their traditionally produced counterparts, making them excellent antibacterial and cancer-fighting drugs. Additionally, these ZnO-NPs are beneficial when combined with the healing processes of wounds and biosensing components to trace small portions of biomarkers linked with various disorders. It has also been discovered that ZnO-NPs can distribute and sense drugs. Green-synthesized ZnO-NPs are compared to traditionally synthesized ones in this review, which shows that they have outstanding potential as a potent biological agent, as well as related hazardous properties.

Nanoparticle, a promising therapeutic strategy for the treatment of infective endocarditis

Infective endocarditis (IE) has been recognized as a biofilm-related disease caused by pathogenic microorganisms, such as bacteria and fungi that invade and damage the heart valves and endocardium. There are many difficulties and challenges in the antimicrobial treatment of IE, including multi-drug resistant pathogens, large dose of drug administration with following side effects, and poor prognosis. For the past few years, the development of nanotechnology has promoted the use of nanoparticles as antimicrobial nano-pharmaceuticals or novel drug delivery systems (NDDS) in antimicrobial therapy for chronic infections and biofilm-related infectious disease as these molecules exhibit several advantages. Therefore, nanoparticles have a potential role to play in solving problems in the treatment of IE, including improving antimicrobial activity, increasing drug bioavailability, minimizing frequency of drug administration, and preventing side effects. In this article, we review the latest advances in nanoparticles against drug-resistant bacteria in biofilm and recommends nanoparticles as an alternative strategy to the antibiotic treatment of IE.

Structure-controlled lignin complex for PLA composites with outstanding antibacterial, fluorescent and photothermal conversion properties

Polylactic acid (PLA) is increasingly being considered as an ideal biodegradable candidate to replace petroleum-based polymers. However, its practical applications are often hampered by the poor mechanical robustness and solo functionality. Herein, based on the mechanical property improvement of PLA we proposed a simple process of assembling lignin-hybridized modifier and PLA matrix, as opposed to the traditional trade-off between mechanical strength and functionality, while anchoring a biofluorescent moiety onto lignin surfaces. Specifically, the fluorophore group could act as interfacial compatibilizer of complex and facilitate the shape-tailored hybrids for promoting functionality flexibility. With the bimetallic hetero-particles, the preferable lignin-assembled complex could be controllably configured as an antibacterial, fluorophore and photothermal agent. Thus, mechanical enhancement, fluorescence introduction and favorable photothermal ability of the resulting PLA composites were successfully achieved for integrated unification of structural robustness, geometric integrity and functional multiplicity, which was never seen in the other reports. The results showed that PLA composites containing 5 wt% modified lignin, 10 wt% zinc oxide, and 5 wt% silver presented excellent mechanical, fluorescent, photothermal conversion properties. By controlling the ZnO content and morphology, strong inhibition of Escherichia coli (Gram-negative) than that of Staphylococcus Aureus (Gram-positive) was also observed. The flake-shaped ZnO /Ag hybrids contributed to better overall performance of PLA composites than the rod-shaped ZnO/Ag. In this work we developed a facile strategy to assemble a bioderived fluorophore with lignin particles for constructing a structure-controlled complex as a multitasking modifier, featuring mechanical unity and functional adaptability. Specifically, the lignin reinforcement and bimetallic hybrids with different morphologies were explored as an effective fluorophore, antibacterial and photothermal agent. Through multiple dehydration reactions, a conjugating fluorophore was successfully grafted on lignin surfaces to serve as an interface modifier without physical changing its structural robustness. And morphology-tailored hybrid was advantageously immobilized on predefined hetero-particle carrier of fluorescent lignin and endowed composites with desirable antimicrobial properties. The developed strategy would expand the functional applications of PLA materials in food packaging, biopharmaceuticals and simple fluorescent anti-counterfeiting.

Cytotoxicity of ZnO Nanoparticle Under Dark via Oxygen Vacancy Dependent Reactive Oxygen Species Generation

Antimicrobial and cytotoxic effect of zinc oxide nanomaterials are popularly thought due to zinc ion leaching, but the exact mechanism of cytotoxicity is controversial and not fully understood. Recent works...

Chitosan nanofiber biocomposites for potential wound healing applications: Antioxidant activity with synergic antibacterial effect

Bacterial wound infection is one of the most common nosocomial infections. The unnecessary employment of antibiotics led to raising the growth of antibiotic-resistant bacteria. Accordingly, alternative armaments capable of accelerating wound healing along with bactericidal effects are urgently needed. Considering this, we fabricated chitosan (CS)/polyethylene oxide (PEO) nanofibers armed with antibacterial silver and zinc oxide nanoparticles. The nanocomposites exhibited a high antioxidant effect and antibacterial activity against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. Besides, based on the results of the cell viability assays, the optimum concentration of ZnONPs and AgNPs in the nanofibrous mats is 0.2% w/v and 0.08% w/v respectively and had no cytotoxicity on fibroblast cells. The scaffold also showed good blood compatibility according to the effects of coagulation time. As well as significant fibroblast migration and proliferation on the wound margin, according to wound-healing assay. All in all, the developed biocompatible, antioxidant, and antibacterial Ag-ZnO NPs incorporated CS/PEO nanofibrous mats showed their potential as an effective wound dressing.

The Influence of Zinc Oxide with Carbon Nanotube Composite NanoMaterials on Antibacterial Activity

A novel hybrid substance, ZnO: MWCNT, are fabricated from prepared pellets using a pulsed laser ablation liquid technique at varied MWCNT concentrations (0, 3, 5, 10, and 15) wt%. The study cast at the effect of MWCNT concentration on the structure of prepared samples using FTIR and tested for different types of antimicrobial activity. From FTIR examination, one can observe that all the prepared ZnO: MWCNT samples with different concentrations have different types of band (stretching and bending). All the prepared composite samples with various concentrations have showed influence on different types of bacterial, however in general the annealing ZnO, MWCNT and the composite nanomaterial with 15%MWCNT have higher zone of antibacterial activity for studying types of bacterial inhibition.

Nanotechnology as a Novel Approach in Combating Microbes Providing an Alternative to Antibiotics

The emergence of infectious diseases promises to be one of the leading mortality factors in the healthcare sector. Although several drugs are available on the market, newly found microorganisms carrying multidrug resistance (MDR) against which existing drugs cannot function effectively, giving rise to escalated antibiotic dosage therapies and the need to develop novel drugs, which require time, money, and manpower. Thus, the exploitation of antimicrobials has led to the production of MDR bacteria, and their prevalence and growth are a major concern. Novel approaches to prevent antimicrobial drug resistance are in practice. Nanotechnology-based innovation provides physicians and patients the opportunity to overcome the crisis of drug resistance. Nanoparticles have promising potential in the healthcare sector. Recently, nanoparticles have been designed to address pathogenic microorganisms. A multitude of processes that can vary with various traits, including size, morphology, electrical charge, and surface coatings, allow researchers to develop novel composite antimicrobial substances for use in different applications performing antimicrobial activities. The antimicrobial activity of inorganic and carbon-based nanoparticles can be applied to various research, medical, and industrial uses in the future and offer a solution to the crisis of antimicrobial resistance to traditional approaches. Metal-based nanoparticles have also been extensively studied for many biomedical applications. In addition to reduced size and selectivity for bacteria, metal-based nanoparticles have proven effective against pathogens listed as a priority, according to the World Health Organization (WHO). Moreover, antimicrobial studies of nanoparticles were carried out not only in vitro but in vivo as well in order to investigate their efficacy. In addition, nanomaterials provide numerous opportunities for infection prevention, diagnosis, treatment, and biofilm control. This study emphasizes the antimicrobial effects of nanoparticles and contrasts nanoparticles' with antibiotics' role in the fight against pathogenic microorganisms. Future prospects revolve around developing new strategies and products to prevent, control, and treat microbial infections in humans and other animals, including viral infections seen in the current pandemic scenarios.

Tuning Microbial Activity via Programmatic Alteration of Cell/Substrate Interfaces

A wide portfolio of advanced programmable materials and structures has been developed for biological applications in the last two decades. Particularly, due to their unique properties, semiconducting materials have been utilized in areas of biocomputing, implantable electronics, and healthcare. As a new concept of such programmable material design, biointerfaces based on inorganic semiconducting materials as substrates introduce unconventional paths for bioinformatics and biosensing. In particular, understanding how the properties of a substrate can alter microbial biofilm behavior enables researchers to better characterize and thus create programmable biointerfaces with necessary characteristics on demand. Herein, the current status of advanced microorganism-inorganic biointerfaces is summarized along with types of responses that can be observed in such hybrid systems. This work identifies promising inorganic material types along with target microorganisms that will be critical for future research on programmable biointerfacial structures.

NanoZnO-modified titanium implants for enhanced anti-bacterial activity, osteogenesis and corrosion resistance

Titanium (Ti) implants are widely used in dentistry and orthopedics owing to their excellent corrosion resistance, biocompatibility, and mechanical properties, which have gained increasing attention from the viewpoints of fundamental research and practical applications. Also, numerous studies have been carried out to fine-tune the micro/nanostructures of Ti and/or incorporate chemical elements to improve overall implant performance. Zinc oxide nanoparticles (nano-ZnO) are well-known for their good antibacterial properties and low cytotoxicity along with their ability to synergize with a variety of substances, which have received increasingly widespread attention as biomodification materials for implants. In this review, we summarize recent research progress on nano-ZnO modified Ti-implants. Their preparation methods of nano-ZnO modified Ti-implants are introduced, followed by a further presentation of the antibacterial, osteogenic, and anti-corrosion properties of these implants. Finally, challenges and future opportunities for nano-ZnO modified Ti-implants are proposed.

Electrochemical Impedance Spectroscopy of Zinc Oxide Nanoparticles After Deposition on Screen Printed Electrode

A small aliquot (10-14 μL) of ZnO nanoparticles dispersed in deionized water was deposited by evaporation to produce a dry residue on the working area of a screen-printed electrode. An electrochemical test solution containing K₃Fe(CN)₆ and KCl was added to the electrode surface for analysis by electrochemical impendence spectroscopy (EIS). Using this deposition analysis technique, a new relationship between the charge transfer resistance (R_ct) and the amount of ZnO nanoparticles has been explored. Based on the trend of increasing R_ct value with an increase of ZnO nanoparticles, a quantitative analysis method can be established to determine the mass of nanoparticles (0.01-1.00 μg) deposited from an unknown dispersion. To study the matrix effect, addition of Nafion solution to the aqueous dispersion resulted in a change of the linear range to 0.3-0.5 μg nanoparticles. Addition of methanol (10% by volume) to the aqueous dispersion changes the analysis range to 0.2-0.6 μg nanoparticles, while additional methanol (50% by volume) changes the analysis range to 0.06-1.00 μg nanoparticles. The analytical sensitivity, as indicated by the slope of each standard calibration curve, ranked as: aqueous dispersion > Nafion/aqueous dispersion > 10% methanol/aqueous dispersion > 50% methanol/aqueous dispersion. Altogether these results verify that deionized water is the best dispersion medium for EIS analysis of ZnO nanoparticles.

Zinc oxide nanoparticles promote the aging process in a size-dependent manner

Zinc oxide (ZnO) nanoparticles (NPs) are generally utilized in cosmetic goods, sheds, biosensors, and delivery of drug. As in vitro ideal systems, mesenchymal stem cells (MSCs) are used to test acute toxicity. In the present study, size-dependent cytotoxicity effects of ZnO NPs on MSCs were assessed. Bone marrow and adipose MSCs were treated with ZnO NPs with average sizes of 10-30 and 35-45 nm. The 5 and 10 µg/ml concentrations of ZnO NP were found to be the safe concentrations for the NP sizes of 10-30 and 35-45 nm, respectively. Cell-cycle analysis indicated that the small size of ZnO NPs has more negative effects on the process of cell entry to DNA synthesis when compared to the larger size. The results of the β-galactosidase test showed the promotion of the aging process in the cells treated with the smaller size of ZnO NPs. Both sizes of the NP were found to upregulate the aging-related genes NF-kB and p53 and downregulate the anti-aging gene Nanog. To sum up, the smaller size of ZnO NPs can enhance the aging process in the cells.

Application of Electrospinning in Antibacterial Field

In recent years, electrospun nanofibers have attracted extensive attention due to their large specific surface area, high porosity, and controllable shape. Among the many applications of electrospinning, electrospun nanofibers used in fields such as tissue engineering, food packaging, and air purification often require some antibacterial properties. This paper expounds the development potential of electrospinning in the antibacterial field from four aspects: fiber morphology, antibacterial materials, antibacterial mechanism, and application fields. The effects of fiber morphology and antibacterial materials on the antibacterial activity and characteristics are first presented, then followed by a discussion of the antibacterial mechanisms and influencing factors of these materials. Typical application examples of antibacterial nanofibers are presented, which show the good prospects of electrospinning in the antibacterial field.

Nanomaterials as drug delivery systems with antibacterial properties: current trends and future priorities

Introduction:Despite extensive advances in the production and synthesis of antibiotics, infectious diseases are one of the main problems of the 21st century due to multidrug-resistant (MDR) distributing in organisms. Therefore, researchers in nanotechnology have focused on new strategies to formulate and synthesis the different types of nanoparticles (NPs) with antimicrobial properties.Areas covered:The present review focuses on nanoparticles which are divided into two groups, organic (micelles, liposomes, polymer-based and lipid-based NPs) and inorganic (metals and metal oxides). NPs can penetrate the cell wall then destroy permeability of cell membrane, the structure and function of cell macromolecules by producing of reactive oxygen species (ROS) and eventually kill the bacteria. Moreover, their characteristics and mechanism in various bacteria especially MDR bacteria and finally their biocompatibility and the factors affecting their activity have been discussed.Expert opinion:Nanotechnology has led to higher drug absorption, targeted drug delivery and fewer side effects. NPs can overcome MDR through affecting several targets in the bacteria cell and synergistically increase the effectiveness of current antibiotics. Moreover, organic NPs with regard to their biodegradability and biocompatibility characteristics can be suitable agents for medical applications. However, they are less stable in environment in comparison to inorganic NPs.