Exploiting Force Sensitive Spiropyrans as Molecular Level Probes

Fluorescent Materials Based on Spiropyran for Advanced Anti-Counterfeiting and Information Encryption

In daily life, counterfeit and substandard products, particularly currency, medicine, food, and confidential documents, are capable of bringing about very serious consequences. The development of anti-counterfeiting and authentication technologies with multilevel securities is a powerful means to overcome this challenge. Among various anti-counterfeiting technologies, fluorescent anti-counterfeiting technology is well-known and commonly used to fight counterfeiters due to its wide material source, low cost, simple usage, good concealment, and simple response mechanism. Spiropyran is favored by scientists in the fields of anti-counterfeiting and information encryption due to its reversible photochromic property. Here, we summarize the current available spiropyran-based fluorescent materials from design to anti-counterfeiting applications. This review will be help scientists to design and develop fluorescent anti-counterfeiting materials with high security, high performance, quick response, and high anti-counterfeiting level.

Mechanochromic Hydrogel Fibers with Multiple Fluorescent Colors

Mechanochromic polymers can change their color in response to external force and have shown promising applications in stress sensing and failure warning. They are usually obtained as thin films or bulky specimens. The mechanochromic fibers, which can be used to make smart fabrics, have been seldom reported due to the lack of efficient fabrication techniques. In this work, a general method using photo-polymerization of microgel solution in a template tube to produce mechanochromic hydrogel fibers is reported. The obtained hydrogel fibers can generate visible and fluorescent color changes upon deformation. The diameter of the mechanochromic fibers can be easily adjusted by using different template tubes. The mechanochromic fibers can be fabricated as long as 1 m. By reducing the fiber diameter or increasing the microgel concentration, the mechanical properties of the mechanochromic fibers can be improved, leading to more obvious mechanochromic behavior. The polymethacrylate (PMA) is further used to coat the hydrogel fibers, prevent the loss of water in the fibers, and increase the storage time. The mechanochromic fibers with multiple fluorescent colors are further fabricated by utilizing different microgel solutions. This work provides an easy and effective method to fabricate mechanochromic fibers with different color change abilities.

Solvent Polarity Effects on the Mechanochemistry of Spiropyran Ring Opening

The spiropyran mechanophore (SP) is employed as a reporter of molecular tension in a wide range of polymer matrices, but the influence of surrounding environment on the force-coupled kinetics of its ring opening has not been quantified. Here, we report single-molecule force spectroscopy studies of SP ring opening in five solvents that span normalized Reichardt solvent polarity factors (ETN) of 0.1-0.59. Individual multimechanophore polymers were activated under increasing tension at constant 300 nm s-1 displacement in an atomic force microscope. The extension results in a plateau in the force-extension curve, whose midpoint occurs at a transition force f* that corresponds to the force required to increase the rate constant of SP activation to approximately 30 s-1. More polar solvents lead to mechanochemical reactions that are easier to trigger; f* decreases across the series of solvents, from a high of 415 ± 13 pN in toluene to a low of 234 ± 9 pN in n-butanol. The trend in mechanochemical reactivity is consistent with the developing zwitterionic character on going from SP to the ring-opened merocyanine product. The force dependence of the rate constant (Δx‡) was calculated for all solvent cases and found to increase with ETN, which is interpreted to reflect a shift in the transition state to a later and more productlike position. The inferred shift in the transition state position is consistent with a double-well (two-step) reaction potential energy surface, in which the second step is rate determining, and the intermediate is more polar than the product.

Triggered Crosslinking of Main-Chain Enediyne Polyurethanes via Bergman Cyclization

Crosslinking chemistries occupy an important position in polymer modification with a particular importance when triggered in response to external stimuli. Enediyne (EDY) moieties are used as functional entities in this work, known to undergo a pericyclic Bergman cyclization (BC) to induce a triggered crosslinking of polyurethanes (PU) via the intermediately formed diradicals. Diamino-EDYs, where the distance between the enyne-moieties is known to be critical to induce a BC, are placed repetitively as main-chain structural elements in isophorone-based PUs to induce reinforcement upon heating, compression, or stretching. A 7-day compression under room temperature results in a ≈69% activation of the BC, together with the observation of an increase in tensile strength by 62% after 25 stretching cycles. The occurrence of BC is further proven by the decreased exothermic values in differential scanning calorimetry, together with characteristic peaks of the formed benzene moieties via IR spectroscopy. Purely heat-induced crosslinking contributes to 191% of the maximum tensile strength in comparison to the virgin PU. The BC herein forms an excellent crosslinking strategy, triggered by heat or force in PU materials.

Semi-Telechelic Polymers from Mechanochemical C─C Bond Activation

Unstrained C─C bond activation is attained in homopolymers through mechanochemical bond scission followed by functionalization to yield mostly semi-telechelic polymer chains. Ball milling poly(ethylene oxide) (PEO) in the presence of 1-(bromoacetyl)pyrene (BAPy) yields the pyrene terminated PEO. Similarly, milling with 2,4'-dibromoacetophenone followed by Suzuki coupling allows the introduction of various aryl end groups. PEOs with a molecular weight below 20 kDa show no functionalization, supporting a mechanochemical mechanism. The protocol is also tested with doxorubicin, yielding the drug-polymer conjugate. PEO halogenation is also demonstrated by milling PEO with iodine, N-bromosuccinimide, or N-iodosuccinimide, which can then be reacted with an amine substituted anthracene. Grinding additional carbon polymers with BAPy indicates that this functionalization method is general for different polymer chemistries.

Effect of Polymer Composition and Morphology on Mechanochemical Activation in Nanostructured Triblock Copolymers

The effect of composition and morphology on mechanochemical activation in nanostructured block copolymers was investigated in a series of poly(methyl methacrylate)-block-poly(n-butyl acrylate)-block-poly(methyl methacrylate) (PMMA-b-PnBA-b-PMMA) triblock copolymers containing a force-responsive spiropyran unit in the center of the rubbery PnBA midblock. Triblock copolymers with identical PnBA midblocks and varying lengths of PMMA end-blocks were synthesized from a spiropyran-containing macroinitiatior via atom transfer radical polymerization, yielding polymers with volume fractions of PMMA ranging from 0.21 to 0.50. Characterization by transmission electron microscopy revealed that the polymers self-assembled into spherical and cylindrical nanostructures. Simultaneous tensile tests and optical measurements revealed that mechanochemical activation is strongly correlated to the chemical composition and morphologies of the triblock copolymers. As the glassy (PMMA) block content is increased, the overall activation increases, and the onset of activation occurs at lower strain but higher stress, which agrees with predictions from our previous computational work. These results suggest that the self-assembly of nanostructured morphologies can play an important role in controlling mechanochemical activation in polymeric materials and provide insights into how polymer composition and morphology impact molecular-scale force distributions.

Multi-material 3D Printing of Mechanochromic Double Network Hydrogels for On-Demand Patterning

Cephalopods can change their color and patterns by activating the skin chromatophores for camouflage. However, in the man-made soft material systems, it is greatly challenging to fabricate the color-change structure in the desired patterns and shapes. Herein, we employ a multi-material microgel direct ink writing (DIW) printing method to make mechanochromic double network hydrogels in arbitrary shapes. We prepare the microparticles by grinding the freeze-dried polyelectrolyte hydrogel and immobilize the microparticles in the precursor solution to produce the printing ink. The polyelectrolyte microgels contain mechanophores as the cross-linkers. We adjust the rheological and printing properties of the microgel ink by tailoring the grinding time of freeze-dried hydrogels and microgel concentration. The multi-material DIW 3D printing technique is utilized to fabricate various 3D hydrogel structures which could change into a colorful pattern in response to applied force. The microgel printing strategy shows great potential in the fabrication of the mechanochromic device with arbitrary patterns and shapes.

Hybrid phenol-rhodamine dye based mechanochromic double network hydrogels with tunable stress sensitivity

Mechanochromic hydrogels, which can switch their color in response to the applied external force, have shown great potential in the stress visualization and damage indication. However, the kinds of the colors in the reported mechanochromic hydrogels are limited. It is challenging to develop the mechanochromic hydrogels with new kinds of color change. Herein, we report a kind of mechanochromic double network (DN) hydrogel based on the hybrid phenol-rhodamine (HPR) mechanophore. The hydrogels turn into orange color with an emission wavelength of around 566/574 nm in response to tensile and compressive stress. The DN hydrogels show great reversibility. The color of DN hydrogels vanishes slowly after releasing the stress. The stress sensitivity can be tailored by the crosslinking density and the mechanophore concentration of the first network. In addition, the influence of the pH on the mechanochromic properties of DN hydrogels is also studied. This study provides an insightful study in tuning the stress sensitivity in the mechanochromic hydrogel, which would be beneficial for the development of the mechanochromic materials. This article is protected by copyright. All rights reserved.

Mechanochromophore-linked Polymeric Materials with Visible Color Changes

Mechanical force as a type of stimuli for smart materials has obtained much attention in the past decade. Color-changing materials in response to mechanical stimuli have shown great potential in the applications such as sensors and displays. Mechanochromophore-linked polymeric materials, which are a growing sub-class of these materials, are discussed in detail in this review. Two main types of mechanochromophores which exhibit visible color change, summarized herein, involve either isomerization or radical generation mechanisms. This review focuses on their synthesis and incorporation into polymer matrices, the type of mechanical force used, factors affecting the mechanochromic properties, and their applications. This article is protected by copyright. All rights reserved.

Design and synthesis of mechanochromic poly(ether-ester-urethane) elastomer with high toughness and resilience mediated by crystalline domains

Mechanochromic elastomers play an important role in stain sensing, materials damage alarming and stress detecting, etc. Low activation strain and stress, high toughness and resilience, and self-recovery ability are essential...

Strain-correlated mechanochromism in different polyurethanes featuring a supramolecular mechanophore

A previously reported, supramolecular, loop-forming mechanophore comprised of two covalently connected perylene diimide (PDI) dyes was equipped with hydroxy groups and covalently incorporated into different polyurethanes (PUs). Four PUs with...

Release of Molecular Cargo from Polymer Systems by Mechanochemistry

The design and manipulation of (multi)functional materials at the nanoscale holds the promise of fuelling tomorrow's major technological advances. In the realm of macromolecular nanosystems, the incorporation of force‐responsive groups, so called mechanophores, has resulted in unprecedented access to responsive behaviours and enabled sophisticated functions of the resulting structures and advanced materials. Among the diverse force‐activated motifs, the on‐demand release or activation of compounds, such as catalysts, drugs, or monomers for self‐healing, are sought‐after since they enable triggering pristine small molecule function from macromolecular frameworks. Here, we highlight examples of molecular cargo release systems from polymer‐based architectures in solution by means of sonochemical activation by ultrasound (ultrasound‐induced mechanochemistry). Important design concepts of these advanced materials are discussed, as well as their syntheses and applications.

Force-mediated molecule release from double network hydrogels

The incorporation of mechanosensitive linkages into polymers has led to materials with dynamic force responsivity. Here we report oxanorbornadiene cross-linked double network hydrogels that release molecules through a force-mediated retro Diels-Alder reaction. The molecular design and tough double network of polyacrylamide and alginate promote significantly higher activation at substantially less force than pure polymer systems. Activation at physiologically relevant forces provides scope for instilling dynamic mechanochemical behavior in soft biological materials.

Activation of a Copper Biscarbene Mechano-Catalyst Using Single-Molecule Force Spectroscopy Supported by Quantum Chemical Calculations

Single-molecule force spectroscopy allows investigation of the effect of mechanical force on individual bonds. By determining the forces necessary to sufficiently activate bonds to trigger dissociation, it is possible to predict the behavior of mechanophores. The force necessary to activate a copper biscarbene mechano-catalyst intended for self-healing materials was measured. By using a safety line bypassing the mechanophore, it was possible to pinpoint the dissociation of the investigated bond and determine rupture forces to range from 1.6 to 2.6 nN at room temperature in dimethyl sulfoxide. The average length-increase upon rupture of the Cu-C bond, due to the stretching of the safety line, agrees with quantum chemical calculations, but the values exhibit an unusual scattering. This scattering was assigned to the conformational flexibility of the mechanophore, which includes formation of a threaded structure and recoiling of the safety line.

Rhodamine-Installed Polynorbornenes: Molecular Design, Structure, and Stimuli-Responsive Properties

The synthesis of a number of tailored architectures of rhodamine dye-norbornene conjugate monomers and corresponding homopolymers derived from them is described. The impact of the monomer architecture on the mechanochromic, photochromic, and thermochromic properties of rhodamine-modified polynorbornenes is reported. Color changes were caused by the reversible interconversion between the "open" and "closed" spirolactam form of the covalently attached dye. Monomers were synthesized in two principle architectures that varied on: (1) the number of polymerizable norbornene groups tethered to a bifunctional rhodamine dye; (2) the presence of flexible methylene spacers between the dye and the polymerizable norbornene groups. Introduction of norbornene groups on each of the two hydroxy groups of a bifunctional rhodamine resulted in a cross-linked polymer that exhibited better mechanochromic, photochromic, and thermochromic properties compared to the corresponding polymer without cross-links, derived from the derivatization of bifunctional rhodamine with only one norbornene. The introduction of flexible methylene spacers between the two polymerizable norbornenes and the dye molecule resulted in a polymeric framework with rapidly reversible color-changing properties upon mechanical or photostimulation. The ideal monomer molecular structure, whereby (1) attaching norbornene on both sides of the rhodamine dye and (2) methylene spacers between the dye and norbornenes on both sides afforded the nonpareil polymer structure that was capable of thermoreversible mechanochromic and photochromic features, and irreversible thermochromic features. These new materials may find utility as multi-stimuli-responsive soft materials.

Direct and Divergent Solid-Phase Synthesis of Azobenzene and Spiropyran Derivatives

Here, we report a solid-phase approach to synthesize azobenzene and spiropyran derivatives. The divergent synthesis process requires no purification steps to obtain the desired product with a 28-55% yield, depending on the specific compound. For the spiropyran compounds, solid-phase resin cleavage is performed under mild conditions to minimize spiropyran ring opening. The solid-phase method enables the synthesis of a library of azobenzene and spiropyran derivatives without the need to develop purification strategies for each derivative.

Substituent Effects in Mechanochemical Allowed and Forbidden Cyclobutene Ring-Opening Reactions

Woodward and Hoffman once jested that a very powerful Maxwell demon could seize a molecule of cyclobutene at its methylene groups and tear it open in a disrotatory fashion to obtain butadiene (Woodward, R. B.; Hoffmann, R. The Conservation of Orbital Symmetry. Angew. Chem., Int. Ed. 1969, 8, 781-853). Nearly 40 years later, that demon was discovered, and the field of covalent polymer mechanochemistry was born. In the decade since our demon was befriended, many fundamental investigations have been undertaken to build up our understanding of force-modified pathways for electrocyclic ring-opening reactions. Here, we seek to extend that fundamental understanding by exploring substituent effects in allowed and forbidden ring-opening reactions of cyclobutene (CBE) and benzocyclobutene (BCB) using a combination of single-molecule force spectroscopy (SMFS) and computation. We show that, while the forbidden ring-opening of cis-BCB occurs at a lower force than the allowed ring-opening of trans-BCB on the time scale of the SMFS experiment, the opposite is true for cis- and trans-CBE. Such a reactivity flip is explained through computational analysis and discussion of the so-called allowed/forbidden gap.

An effective approach for fabricating high-strength polyurethane hydrogels with reversible photochromic performance as a photoswitch

Reversible high-strength photochromic polyurethane hydrogel which can realize information storage was successfully prepared by a polyaddition reaction.

Mechanochemical tools for polymer materials

This review aims to provide a field guide for the implementation of mechanochemistry in synthetic polymers by summarizing the molecules, materials, and methods that have been developed in this field.

Monolithic Spiropyran-Based Porous Polysilsesquioxanes with Stimulus-Responsive Properties

Dynamic materials comprising spiropyrans have emerged as one of the most interesting and promising class of stimulus-responsive materials. Spiropyrans are often embedded in polymer matrices; their covalent attachment into porous monolithic silsesquioxane frameworks, however, is virtually unexplored. We demonstrate that a silylated spiropyran derivative can be covalently incorporated into ultralight silsesquioxane-based bulk materials by a two-step co-condensation sol-gel approach without restricting its conformational freedom and thus its stimulus-responsive properties. UV-vis measurements prove the conversion of the colorless closed-ring form of the spiropyran molecule into its highly colored purple isomer or the yellow colored protonated structure thereof. The transformation can be triggered simply by irradiation of the spiropyran-containing silsesquioxane monolith with UV or visible light or by the pH value of the chemical environment. A strong dependence of the surface polarity and water wettability on the prevalent isomer was observed. The contact angle of a water droplet on the monolithic surface can be altered from 146 to 100° by irradiation of the monolith with UV light for 3 min. Additionally, the prepared materials possess high specific surface areas, low bulk densities, and porosities of up to 84%.

Textile Based Electrochromic Cells Prepared with PEDOT: PSS and Gelled Electrolyte

Electrochromic devices can act as passive displays. They change their color when a low voltage is applied. Flexible and bendable hybrid textile-film electrochromic devices with poly-3,4-ethylenedioxythiophene polystyrene sulfonate (PEDOT:PSS) were prepared on polyethylene polyethylene terephthalate (PEPES) membranes using a spray coating technique. The electrolyte consisted of a gelatin glycerol mixture as host matrix and calcium chloride. Titanium dioxide was used as an ion storage layer and a carbon containing dispersion was used for the counter electrode on a polyester rip-stop fabric. The sheet resistance of PEDOT:PSS on PEPES was 500 Ohm/sq. A 5 × 5 electrochromic matrix with individually addressable pixels was successfully designed and assembled. The switching time of the pixels was 2 s at a voltage of 2.0 V directly after assembling. The use of titanium dioxide as ion storage also increased the contrast of the dark-blue reduced electrochromic layer. Coloration was not self-sustaining. The PEDOT:PSS layer needed a constant low voltage of at least 0.5 V to sustain in the dark-blue reduced state. The switching time increased with time. After 12 months the switching time was ~4 s at a voltage of 2.8 V. The addition of glycerol into the electrolyte extended the lifetime of a non-encapsulated textile electrochromic cell, because moisture is retained in the electrolyte. Charge carriers can be transported into and out of the electrochromic layer.

An engineer's introduction to mechanophores

Mechanophores (MPs) are a class of stimuli-responsive materials that are of increasing interest to engineers due to their potential applications as stress sensors. These mechanically responsive molecules change color or become fluorescent upon application of a mechanical stimulus as they undergo a chemical reaction when a load is applied. By incorporating MPs such as spirolactam, spiropyran, or dianthracene into a material system, the real-time stress distribution of the matrix can be directly observed through a visual response, ideal for damage and failure sensing applications. A wide array of applications that require continuous structural health monitoring could benefit from MPs including flexible electronics, protective coatings, and polymer matrix composites. However, there are significant technical challenges preventing MP implementation in industry. Effective strategies to quantitatively calibrate the photo response of the MP with applied stress magnitudes must be developed. Additionally, environmental conditions, including temperature, humidity, and ultraviolet light exposure can potentially impact the performance of MPs. By addressing these limitations, engineers can work to move MPs from the synthetic chemistry bench to the field. This review aims to highlight recent progress in MP research, discuss barriers to implementation, and provide an outlook on the future of MPs, specifically focused on polymeric material systems. Although the focus is on engineering MPs for bulk materials, a brief overview of mechanochemistry will be discussed followed by methods for activation and quantification of MP photo response (concentrating specifically on fluorescently active species). Finally, current challenges and future directions in MP research will be addressed.

Supramolecular Oligourethane Gel with Multicolor Luminescence Controlled by Mechanically Sensitive Hydrogen-Bonding

We report a new type of mechanically sensitive multicolor luminescent oligourethane gel (OUA-gel). The conformation of the oligomeric chains can be controlled by changing the strength of hydrogen bonds. The optical properties of the oligomers are highly dependent on the conformations which vary in response to mechanical stresses and phase transitions. The design relies on the introduction of a single mechanical chromophore, aurintricarboxylic acid, with propeller-like, spatially crowded, and highly twisted conformations, and the presence of three carboxyl groups, which provide multidirectional hydrogen-bonding opportunities. Introducing dimethylsulfoxide (DMSO) as an additional H-bond acceptor molecule leads to a viscous OUA-gel which exhibits multiemission colors because of changes in the chain conformation within the matrix, which are induced by different strengths of H bonds. The conformation can be adjusted by mechanical force or temperature, both of which influence the H-bonding. The multifunctional and multicolored mechanochromism of the OUA-gel has great promise in sensing applications. The results represent a substantial step toward understanding the mechanism of polychromism in soft materials and the molecular design of advanced smart materials.

Localization of Spiropyran Activation

Functionalization of planar and curved glass surfaces with spiropyran (SP) molecules and localized UV-induced activation of the mechanophore are demonstrated. Fluorescence spectra of UV-irradiated SP-functionalized surfaces reveal that increases in surface roughness or curvature produce more efficient conversion of the mechanophore to the open merocyanine (MC) form. Further, force-induced activation of the mechanophore is achieved at curved glass-polymer interfaces and not planar interfaces. Minimal fluorescence signal from UV-irradiated SP-functionalized planar glass surfaces precluded mechanical activation testing. Curved glass-polymer interfaces are prepared by SP functionalization of E-glass fibers, which are subsequently embedded in a poly(methyl methacrylate) (PMMA) matrix. Mechanical activation is induced through shear loading by a single fiber microbond testing protocol. In situ detection of SP activation at the interface is monitored by fluorescence spectroscopy. The fluorescence increase during interfacial testing suggests that attachment of the interfacial SP molecule to both fiber surface and polymer matrix is present and able to achieve significant activation of SP at the fiber-polymer matrix interface. Unlike previous studies for bulk polymers, SP activation is detected at relatively low levels of applied shear stress. By linking SP at the glass-polymer interface and transferring load directly to that interface, a more efficient mechanism for eliciting the SP response is achieved.

Polymer mechanochemistry-enabled pericyclic reactions

Polymer mechanochemical pericyclic reactions are reviewed with regard to their structural features and substitution prerequisites to the polymer framework.

Fractography of poly(N-isopropylacrylamide) hydrogel networks crosslinked with mechanofluorophores using confocal laser scanning microscopy

Employing mechanofluorophores in polymer fractography to obtain new information on force-induced events when analyzed by confocal laser scanning microscopy.

Color and shape reversible, recoverable and repeatable mechanochromic shape memory polycaprolactone: a single material with dual functions

A polycaprolactone-based mechanochromic shape memory material exhibits reversible and repeatable shape and color as a result of its crystallinity.

An optomechanical study of mechanoluminescent elastomeric polyurethanes with different hard segments

An optomechanical study of a series of mechanochemiluminescent polyurethanes with different hard segments provides a detailed picture of microphase separation dependent force transduction during their failure process.

Highly sensitive mechano-controlled luminescence in polymer films modified by dynamic CuI-based cross-linkers

Dynamic Cu^I-based mechanophores used as cross-linkers in polybutylacrylates enable highly sensitive detection of mechanical stress even at small strain (<50%) and stress (<0.1 MPa) values via reversible changes in luminescence intensity. Such sensitivity is superior to previously reported systems based on classical organic mechanophores and it allows for direct visualization of mechanical stress by imaging methods.

Strain-Dependent Kinetics in the Cis-to-Trans Isomerization of Azobenzene in Bulk Elastomers

The cis-to-trans isomerization of azobenzene is accelerated in a bulk PDMS elastomer under uniaxial tension. The kinetics are cleanly described by a single-exponential first-order process (k = 2.7 × 10^-5 s^-1) in the absence of tension but become multiexponential under constant strains of 40-90%. The complex kinetics can be reasonably modeled as a two-component process. The majority (∼92%) process is slower and occurs with a rate constant that is similar to that of the unstrained system (k = 2.3-2.7 × 10^-5 s^-1), whereas the rate constant of the minority (∼8%) process increases from k = 10.1 × 10^-5 s^-1 at 40% strain to k = 21.3 × 10^-5 s^-1 at 90% strain. Simple models of expected force-rate relationships suggest that the average force of tension per strand in the minority component ranges from 28 to 44 pN across strains of 40-90%.

Anthracene-based mechanophores for compression-activated fluorescence in polymeric networks

The recent attention given to functionalities that respond to mechanical force has led to a deeper understanding of force transduction and mechanical wear in polymeric materials. Furthermore, polymers have been carefully designed such that activation of "mechanophores" leads to productive outputs, such as material reinforcement or changes in optical properties. In this work, a crosslinker containing an anthracene-maleimide linkage was designed and used to prepare networks that display a fluorescence response when damaged. The pressure-dependent damage of poly(N,N-dimethylacrylamide) networks was monitored using solid-state fluorescence spectroscopy, with increasing compressive forces leading to higher degrees of mechanophore activation. When a stamp was used to compress the networks, only the areas in contact with the raised portion of the stamp underwent mechanophore activation, resulting in the generation of patterns that were only visible under UV light. Finally, an isomeric "flex" mechanophore was designed and used to prepare networks that were compressed and compared to the previously described networks.

Revealing the Dependence of Molecular-Level Force Transfer and Distribution on Polymer Cross-Link Density via Mechanophores

The correlation between polymer architecture and molecular-level forces has long been a challenging research subject. Herein, spiropyran, a mechanophore that exhibits fluorescence change under force, was incorporated as a cross-linker between PMMA backbone segments. Using an in situ opto-mechanical setup to probe the molecular-level forces, the mechano-response of SP-linked PMMA as a function of the cross-link density was monitored during deformation. The dependence of the molecular-level force on cross-link density was quantitatively examined and revealed. First, a higher cross-link density shifted the fluorescence onset, that is, the onset of the spiropyran-to-merocyanine transition, to lower strains, eventually shifting the onset long before yield, without requiring sufficient chain mobility, owing to the higher efficiency of the force transfer. Under the same energy, the increase in cross-link density allowed for faster force transfer, but only to a certain level. Finally, the overall amount of spiropyran-to-merocyanine conversion linearly decreased with increasing cross-link density.

Multicolor Organometallic Mechanophores for Polymer Imaging Driven by Exciplex Level Interactions

Photoluminescent compounds can undergo various structural changes upon interaction with light. When these changes manifest themselves in the excited state, the resulting emitters can obtain a sensory function. In this work, we designed coordination compounds that can vary their emission color in response to thermal and mechanical stimuli. When embedded in a polymer matrix, Cu-NHC sensors act as mechanophores, and their color-based response can readily describe mechanical stress and phase transition phenomena. A strong practical advantage of new mechanophores over previous generations of organometallic stress sensors stems from their reliance on emission color variations that are easy to detect. In a broad context, our work implies that emission color variations that we often view as thermally governed can also be triggered mechanically and used to generate sensory information.

A Hierarchical Nanoparticle-in-Micropore Architecture for Enhanced Mechanosensitivity and Stretchability in Mechanochromic Electronic Skins

Biological tissues are multiresponsive and functional, and similar properties might be possible in synthetic systems by merging responsive polymers with hierarchical soft architectures. For example, mechanochromic polymers have applications in force-responsive colorimetric sensors and soft robotics, but their integration into sensitive, multifunctional devices remains challenging. Herein, a hierarchical nanoparticle-in-micropore (NP-MP) architecture in porous mechanochromic polymers, which enhances the mechanosensitivity and stretchability of mechanochromic electronic skins (e-skins), is reported. The hierarchical NP-MP structure results in stress-concentration-induced mechanochemical activation of mechanophores, significantly improving the mechanochromic sensitivity to both tensile strain and normal force (critical tensile strain: 50% and normal force: 1 N). Furthermore, the porous mechanochromic composites exhibit a reversible mechanochromism under a strain of 250%. This architecture enables a dual-mode mechanochromic e-skin for detecting static/dynamic forces via mechanochromism and triboelectricity. The hierarchical NP-MP architecture provides a general platform to develop mechanochromic composites with high sensitivity and stretchability.

Synthesis of functionalized diazocines for application as building blocks in photo- and mechanoresponsive materials

Seven symmetrically 3,3'-substituted diazocines were synthesized. Functional groups include alcohol, azide, amine and vinyl groups, which are suitable for polymer synthesis. Upon irradiation at 385 and 530 nm the diazocines perform a reversible, pincer-type movement switching the 3,3'-distance between 6.1 Å (cis, stable isomer) and 8.2 Å (trans, metastable isomer). Key reactions in the synthesis are an oxidative C-C coupling of 2-nitrotoluenes (75-82% yield) and a reductive ring closure to form the diazocines (56-60% yield). The cyclization of the dinitro compound to the azo compound was improved in yield and reproducibility, by over-reduction to the hydrazine and reoxidation to the azo unit. In contrast to 3,3'- and 4,4'-diaminodiazocine, which have been implemented in macromolecules for conformation switching, our compounds exhibit improved photophysical properties (photostationary states, separation of absorption bands in the cis and trans configuration). Hence they are promising candidates as molecular switches in photo and mechanoresponsive macromolecules and other smart materials.

Mechanochromic dendrimers: the relationship between primary structure and mechanochromic properties in the bulk

Radical-type mechanochromic dendrimers were developed and their mechano-responsivity drastically increased in higher-generation dendrimers.

Tracking Local Mechanical Impact in Heterogeneous Polymers with Direct Optical Imaging

Structural heterogeneity defines the properties of many functional polymers and it is often crucial for their performance and ability to withstand mechanical impact. Such heterogeneity, however, poses a tremendous challenge for characterization of these materials and limits our ability to design them rationally. Herein we present a practical methodology capable of resolving the complex mechanical behavior and tracking mechanical impact in discrete phases of segmented polyurethane-a typical example of a structurally complex polymer. Using direct optical imaging of photoluminescence produced by a small-molecule organometallic mechano-responsive sensor we observe in real time how polymer phases dissipate energy, restructure, and breakdown upon mechanical impact. Owing to its simplicity and robustness, this method has potential in describing the evolution of complex soft-matter systems for which global characterization techniques fall short of providing molecular-level insight.