S-protected thiolated chitosan for oral delivery of hydrophilic macromolecules: evaluation of permeation enhancing and efflux pump inhibitory properties

P-gp inhibition and enhanced oral bioavailability of amikacin Sulfate: A novel approach using Thiolated Chito-PEGylated Lipidic Hybrids

This study aimed to develop oral lipidic hybrids of amikacin sulfate (AMK), incorporating thiolated chitosan as a P-glycoprotein (P-gp) inhibitor to enhance intestinal absorptivity and bioavailability. Three formulations were designed: PEGylated Liposomes, Chitosan-functionalized PEGylated (Chito-PEGylated) Lipidic Hybrids, and Thiolated Chito-PEGylated Lipidic Hybrids. The physical characteristics of nanovesicles were assessed. Ex-vivo permeation and confocal laser scanning microscopy (CLSM) studies were conducted to evaluate the formulations' potential to enhance AMK intestinal permeability. In-vivo pharmacokinetic studies in rats and histological/biochemical investigations assessed the safety profile and oral bioavailability. The AMK-loaded Thiolated Chito-PEGylated Lipidic Hybrids exhibited favorable physical characteristics, higher ex-vivo permeation parameters, and verified P-gp inhibition via CLSM. They demonstrated heightened oral bioavailability (68.62% absolute bioavailability) and a sufficient safety profile. Relative bioavailability was significantly higher (1556.3% and 448.79%) compared to PEGylated Liposomes and Chito-PEGylated Lipidic Hybrids, respectively, indicating remarkable oral AMK delivery with fewer doses, reduced side effects, and enhanced patient compliance.

Inhibition of P-glycoprotein-mediated efflux by thiolated cyclodextrins

Overcoming P-glycoprotein (P-gp)-mediated efflux poses a significant challenge for the pharmaceutical industry. This study investigates the potential of thiolated β-cyclodextrins (β-CD-SHs) as inhibitors of P-gp-mediated efflux in Caco-2 cells. Through a series of transport assays, intracellular accumulation, and efflux of the P-gp substrates Rhodamine 123 (Rh123) and Calcein-AM with and without co-administration of β-CD-SHs were assessed. The results revealed that the cellular uptake of Rh123 and Calcein-AM were enhanced up to 7- and 3-fold, compared to the control, respectively. In efflux studies an up to 2.5-fold reduction of the Rh123 efflux was reached compared the control, indicating a substantial decrease of Rh123 efflux by β-CD-SHs. Furthermore, it was observed that β-CD-SHs led to a decrease in the reactivity of fluorescence-labeled anti-P-gp, suggesting additional effects on the conformation of P-gp. Overall, this study demonstrates the potential of β-CD-SHs as effective modulator of P-gp-mediated drug efflux in Caco-2 cells.

Chitosan-based oral hydrogel formulations of β-galactosidase to improve enzyme supplementation therapy for lactose intolerance

β-Galactosidase supplementation plays an important role in the life of people with lactose intolerance. However, these formulations are rendered ineffective by the low pH and pepsin in the stomach and pancreatic proteases in the intestine. Therefore, it is necessary to develop oral transport systems for carrying this enzyme in the active form up to the intestine, where the lactose digestion occurs. In this research, a new hydrogel was developed that could potentially be used for enzyme supplement therapy. In this regard, the chitosan-based β-Gal formulations described in the manuscript are an alternative long-acting preparation to the so far available preparations that allow for enzyme protection and mucosal targeting. These hydrogels were prepared from chitosan and polyethylene glycol and contained a covalently immobilized β-galactosidase from Aspergillus oryzae. The β-galactosidase in the hydrogel was protected from degradation in a gastric medium at a pH of 2.5 and retained 75 % of its original activity under subsequent intestinal conditions. In the case of a simulated gastric fluid with a pH of 1.5, a copolymer containing methacrylic acid functional groups was sufficient to protect the hybrid hydrogel from the extremely acidic pH. In addition, the surface of the hydrogel was chemically modified with thiol and amidine groups, which increased the binding to intestinal mucin by 20 % compared with the unmodified hydrogel. These results represent a promising approach for oral transport as a reservoir for β-galactosidase in the small intestine to reduce the symptoms of hypolactasia.

Graphene oxide reinforced biopolymeric (chitosan) hydrogels for controlled cephradine release

In the current study, chitosan, poly (N-vinyl-2-pyrolidone) and polyamidoamine based hydrogels were prepared by Solution Casting Method using different quantity of graphene oxide (GO) for controlled cephradine (CPD) release. The hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, thermal analysis, scanning electron microscope and atomic force microscopy. FTIR results endorsed the presence of particular functionalities and developed interfaces in hydrogels. The thermal stability was directly proportional to the amount of GO. Antibacterial activity was investigated against gram-negative bacteria resultantly; CAD-2 exhibited maximum bactericidal activity against Escherichia coli and Psuedomonas aeruginosa. In addition, in-vitro biodegradation was examined in phosphate buffer saline solution and proteinase K for 21 and 07 days respectively. The maximum swelling was exhibited by CAD-133777 % in distilled water that was governed by quasi-Fickian diffusion. The swelling volumes were inversely proportional to the amount of GO. In the same way, pH sensitive CPD release was detected by UV visible spectrophotometer that followed zero order and Higuchi models. However, in 4 h, 89.4 % and 83.7 % of CPD was released in PBS and SIF solution correspondingly. Therefore, the chitosan-based biocompatible and biodegradable hydrogel platforms offered substantial potential for the controlled CPD release in medico-biological applications.

Synergistic effect of p53 gene/DOX intracellular delivery and P-gp inhibition by pullulan thiomers on cancer cells: in vitro and in vivo evaluations

Numerous reports emphasize the inverse relationship between the mutant p53 protein and P-glycoprotein overexpression, which adversely affects the chemosensitivity of cancer cells. In this study, the cationised pullulan polysaccharide was conjugated with dithiobutyric acid (PPDBA) for the intracellular delivery of doxorubicin and the p53 gene. The transfection efficiency of PPDBA using the apoptotic gene p53 and its ability to modulate efflux pumps in the presence and absence of glutathione and the subsequent drug retention were studied in different cell lines. The percentage cell death mediated by the PPDBA/p53 nanoplex (4 : 1 ratio) was 59%, and by DOX alone a 50% cell death was attained at 3.13 μM in C6 cells, but the percentage cell death mediated by PPDBA/p53 (4 : 1) in combination with 1 μM DOX was as high as 98%. The effect of PPDBA II/p53/DOX nanoplexes on the mouse tumor model was evaluated in BALB/c mice which demonstrated good efficacy when compared with the drug or gene alone.

Thiolated Nanoparticles for Biomedical Applications: Mimicking the Workhorses of Our Body

Advances in nanotechnology have generated a broad range of nanoparticles (NPs) for numerous biomedical applications. Among the various properties of NPs are functionalities being related to thiol substructures. Numerous biological processes that are mediated by cysteine or cystine subunits of proteins representing the workhorses of the bodies can be transferred to NPs. This review focuses on the interface between thiol chemistry and NPs. Pros and cons of different techniques for thiolation of NPs are discussed. Furthermore, the various functionalities gained by thiolation are highlighted. These include overall bio- and mucoadhesive, cellular uptake enhancing, and permeation enhancing properties. Drugs being either covalently attached to thiolated NPs via disulfide bonds or being entrapped in thiolated polymeric NPs that are stabilized via inter- and intrachain crosslinking can be released at the diseased tissue or in target cells under reducing conditions. Moreover, drugs, targeting ligands, biological analytes, and enzymes bearing thiol substructures can be immobilized on noble metal NPs and quantum dots for therapeutic, theranostic, diagnostic, biosensing, and analytical reasons. Within this review a concise summary and analysis of the current knowledge, future directions, and potential clinical use of thiolated NPs are provided.

Effect of oxidized dextran on the stability of gallic acid-modified chitosan-sodium caseinate nanoparticles

We incorporated oxidized dextran (Odex) into nanoparticles composed of gallic acid-modified chitosan (GA-CS) and sodium caseinate (NaCas). The mass ratio of GA-CS to NaCas and the pH of the reaction solution were optimized to obtain nanoparticles with excellent performance and stability. The interactions among various nanomaterials were confirmed by Fourier-transform infrared spectroscopy (FT-IR) and fluorescence spectrometer. The optimized complex nanoparticles had a diameter of approximately 131.2 nm with a polydispersity index (PDI) of 0.14, and a zeta potential of 26.2 mV. Our results showed that Odex enhanced the stability and function of GA-CS/NaCas nanoparticles (NP). At a curcumin loading of 10%, the encapsulation efficiency of Odex-crosslinked GA-CS/NaCas (NP (Odex)) was 96.2%, whereas that for uncrosslinked nanoparticles was 66.9%. Compared to the burst release profile of free curcumin in simulated GI fluids, the sustained release profile of encapsulated curcumin was observed. Radical-scavenging assays confirmed that the nanoparticles had excellent antioxidant activity themselves due to the grafting of phenolic acid on chitosan backbone. Overall, NP (Odex) with good GI stability and antioxidant activity hold promising for the oral delivery of hydrophobic bioactives.

Thiolated pectins: In vitro and ex vivo evaluation of three generations of thiomers

In recent decades, three generations of thiomers have been developed with the main purpose of obtaining enhanced interactions with mucosal tissues. Therefore, many different types of thiolated ligands have been generated and attached to polymeric backbones. The aim of this study was to synthesize all three generations of thiomers and to directly compare their properties regarding mucus penetration and mucoadhesion. Starting from pectin, the unprotected thiomer pectin-cysteine (Pec-Cys), the preactivated S-protected thiomer pectin-cysteine-mercaptonicotinic acid (Pec-Cys-MNA) and the less reactive S-protected thiomer pectin-cysteine-glutathione (Pec-Cys-GSH) were synthesized and characterised by FT-IR, NMR, and colorimetric studies. The polymers were evaluated regarding their cytotoxicity, swelling behaviour, viscosity after mixing with mucus, mucus diffusion, penetration into mucosa, and mucoadhesion. The amount of the three ligands (Cys, Cys-MNA and Cys-GSH) bound to the polymer was determined to be in the range of 193-196 µmol/g. All polymers showed no cytotoxicity. Viscosity of the mixture of Pec-Cys-MNA and Pec-Cys-GSH with mucus increased 21.5- and 26.7-fold, respectively, compared to the unmodified polymer within 3 hours. Swelling, mucoadhesion, interpenetration and mucus diffusion were increased in the following rank order: Pec-Cys < Pec-Cys-MNA < Pec-Cys-GSH. Results of mucoadhesion study indicated a 7.4 and 8.1-fold increase of Pec-Cys-MNA and Pec-Cys-GSH, respectively, compared to the unmodified polymer. As the less reactive S-protected thiomer exhibited higher mucoadhesive properties than the other thiomers, this study provides evidence for the superior mucoadhesion of 3^rd generation thiomers. STATEMENT OF SIGNIFICANCE: Three generations of thiolated polymers have been developed bearing different types of thiol ligands with the main purpose of enhancing mucus interactions. In this study, all generations were synthesized on the polymeric backbone of pectin for the first time to directly compare their mucus penetrating and mucoadhesive properties. 1^st generation exhibited covalently bound L-cysteine moieties. For 2^nd generation, thiols of cysteines were S-protected with 2-mercaptonicotinic acid (MNA), resulting in high reactive disulfide bonds. 3^rd generation was synthesized by a thiol/disulfide exchange of glutathione with MNA, producing a less reactive disulfide bond. Mucus penetrating and mucoadhesive properties were found to be increased as follows: 1^st generation < 2^nd generation < 3^rd generation. According to these results, the thiomer of 3^rd generation represents a promising excipient with strong mucoadhesion.

Photoinduced Water Oxidation in Chitosan Nanostructures Containing Covalently Linked RuII Chromophores and Encapsulated Iridium Oxide Nanoparticles

The luminophore Ru(bpy)₂(dcbpy)²⁺ (bpy=2,2’‐bipyridine; dcbpy=4,4’‐dicarboxy‐2,2’‐bipyridine) is covalently linked to a chitosan polymer; crosslinking by tripolyphosphate produced Ru‐decorated chitosan fibers (NS‐RuCh), with a 20 : 1 ratio between chitosan repeating units and Ru^II chromophores. The properties of the Ru^II compound are unperturbed by the chitosan structure, with NS‐RuCh exhibiting the typical metal‐to‐ligand charge‐transfer (MLCT) absorption and emission bands of Ru^II complexes. When crosslinks are made in the presence of IrO₂ nanoparticles, such species are encapsulated within the nanofibers, thus generating the IrO₂⊂NS‐RuCh system, in which both Ru^II photosensitizers and IrO₂ water oxidation catalysts are within the nanofiber structures. NS‐RuCh and IrO₂⊂NS‐RuCh have been characterized by dynamic light scattering, scanning electronic microscopy, and energy‐dispersive X‐ray analysis, which indicated a 2 : 1 ratio between Ru^II chromophores and IrO₂ species. Photochemical water oxidation has been investigated by using IrO₂⊂NS‐RuCh as the chromophore/catalyst assembly and persulfate anions as the sacrificial species: photochemical water oxidation yields O₂ with a quantum yield (Φ) of 0.21, definitely higher than the Φ obtained with a similar solution containing separated Ru(bpy)₃²⁺ and IrO₂ nanoparticles (0.05) or with respect to that obtained when using NS‐RuCh and “free” IrO₂ nanoparticles (0.10). A fast hole‐scavenging process (rate constant, 7×10⁴ s⁻¹) involving the oxidized photosensitizer and the IrO₂ catalyst within the IrO₂⊂NS‐RuCh system is behind the improved photochemical quantum yield of IrO₂⊂NS‐RuCh.

Potential Applications of Chitosan-Based Nanomaterials to Surpass the Gastrointestinal Physiological Obstacles and Enhance the Intestinal Drug Absorption

The small intestine provides the major site for the absorption of numerous orally administered drugs. However, before reaching to the systemic circulation to exert beneficial pharmacological activities, the oral drug delivery is hindered by poor absorption/metabolic instability of the drugs in gastrointestinal (GI) tract and the presence of the mucus layer overlying intestinal epithelium. Therefore, a polymeric drug delivery system has emerged as a robust approach to enhance oral drug bioavailability and intestinal drug absorption. Chitosan, a cationic polymer derived from chitin, and its derivatives have received remarkable attention to serve as a promising drug carrier, chiefly owing to their versatile, biocompatible, biodegradable, and non-toxic properties. Several types of chitosan-based drug delivery systems have been developed, including chemical modification, conjugates, capsules, and hybrids. They have been shown to be effective in improving intestinal assimilation of several types of drugs, e.g., antidiabetic, anticancer, antimicrobial, and anti-inflammatory drugs. In this review, the physiological challenges affecting intestinal drug absorption and the effects of chitosan on those parameters impacting on oral bioavailability are summarized. More appreciably, types of chitosan-based nanomaterials enhancing intestinal drug absorption and their mechanisms, as well as potential applications in diabetes, cancers, infections, and inflammation, are highlighted. The future perspective of chitosan applications is also discussed.

Nanochitosan: Commemorating the Metamorphosis of an ExoSkeletal Waste to a Versatile Nutraceutical

Chitin (poly-N-acetyl-D-glucosamine) is the second (after cellulose) most abundant organic polymer. In its deacetylated form-chitosan-becomes a very interesting material for medical use. The chitosan nano-structures whose preparation is described in this article shows unique biomedical value. The preparation of nanochitosan, as well as the most vital biomedical applications (antitumor, drug delivery and other medical uses), have been discussed in this review. The challenges confronting the progress of nanochitosan from benchtop to bedside clinical settings have been evaluated. The need for inclusion of nano aspects into chitosan research, with improvisation from nanotechnological inputs has been prescribed for breaking down the limitations. Future perspectives of nanochitosan and the challenges facing nanochitosan applications and the areas needing research focus have been highlighted.

Quaternary Ammonium Chitosans: The Importance of the Positive Fixed Charge of the Drug Delivery Systems

As a natural polysaccharide, chitosan has good biocompatibility, biodegradability and biosecurity. The hydroxyl and amino groups present in its structure make it an extremely versatile and chemically modifiable material. In recent years, various synthetic strategies have been used to modify chitosan, mainly to solve the problem of its insolubility in neutral physiological fluids. Thus, derivatives with negative or positive fixed charge were synthesized and used to prepare innovative drug delivery systems. Positively charged conjugates showed improved properties compared to unmodified chitosan. In this review the main quaternary ammonium derivatives of chitosan will be considered, their preparation and their applications will be described to evaluate the impact of the positive fixed charge on the improvement of the properties of the drug delivery systems based on these polymers. Furthermore, the performances of the proposed systems resulting from in vitro and ex vivo experiments will be taken into consideration, with particular attention to cytotoxicity of systems, and their ability to promote drug absorption.

Thiolated Chitosans: A Multi-talented Class of Polymers for Various Applications

Various properties of chitosan can be customized by thiolation for very specific needs in a wide range of application areas. Since the discovery of thiolated chitosans, many studies have proven their advantageous characteristics, such as adhesion to biological surfaces, adjustable cross-linking and swelling behavior, controllable drug release, permeation as well as cellular uptake enhancement, inhibition of efflux pumps and enzymes, complexation of metal ions, antioxidative properties, and radical scavenging activity. Simultaneously, these polymers remain biodegradable without increased toxicity. Within this Review, an overview about the different possibilities to covalently attach sulfhydryl ligands to the polymeric backbone of chitosan is given, and the resulting versatile physiochemical properties are discussed in detail. Furthermore, the broad spectrum of applications for thiolated chitosans in science and industry, ranging from their most advanced use in pharmaceutical and medical science over wastewater treatment to the impregnation of textiles, is addressed.

Less Reactive Thiol Ligands: Key towards Highly Mucoadhesive Drug Delivery Systems

As less reactive s-protected thiomers can likely interpenetrate the mucus gel layer to a higher extent before getting immobilized via disulfide bond formation with mucins, it was the aim of this study to develop a novel type of s-protected thiomer based on the less reactive substructure cysteine-N-acetyl cysteine (Cys-NAC) in order to obtain improved mucoadhesive properties. For this purpose, two types of s-protected thiomers, polyacrylic acid-cysteine-mercaptonicotinic acid (PAA-Cys-MNA) and polyacrylic acid-cysteine-N-acetyl cysteine (PAA-Cys-NAC), were synthesized and characterized by Fourier-transform infrared spectroscopy (FT-IR) and the quantification of attached disulfide ligands. The viscosity of both products was measured in the presence of NAC and mucus. Both thiomers were also evaluated regarding swelling behavior, tensile studies and retention time on the porcine intestinal mucosa. The FT-IR spectra confirmed the successful attachment of Cys-MNA and Cys-NAC ligands to PAA. The number of attached sulfhydryl groups was in the range of 660–683 µmol/g. The viscosity of both s-protected thiomers increased due to the addition of increasing amounts of NAC. The viscosity of the mucus increased in the presence of 1% PAA-Cys-MNA and PAA-Cys-NAC 5.6- and 10.9-fold, respectively, in comparison to only 1% PAA. Both s-protected thiomers showed higher water uptake than unmodified PAA. The maximum detachment force (MDF) and the total work of adhesion (TWA) increased in the case of PAA-Cys-MNA up to 1.4- and 1.6-fold and up to 2.4- and 2.8-fold in the case of PAA-Cys-NAC. The retention of PAA, PAA-Cys-MNA, and PAA-Cys-NAC on porcine intestinal mucosa was 25%, 49%, and 76% within 3 h, respectively. The results of this study provide evidence that less reactive s-protected thiomers exhibit higher mucoadhesive properties than highly reactive s-protected thiomers.

A gellan gum derivative as in-situ gelling cationic polymer for nasal drug delivery

The aim of the present study was the development of a novel gellan gum derivative exhibiting mucoadhesive properties for nasal application. Accomplishing this, amino groups have been introduced to the polymeric backbone. The resulting synthesis products were characterized in terms of the amount of attached amino groups, regarding hydration, zeta potential and gel characteristics. Mucoadhesiveness was assessed studying rheological synergism, by rotating cylinder and regarding tensile studies. Next to erythrocyte-/cytotoxicity evaluation, the impact on ciliary beat frequency of nasal epithelial cells was investigated. Results revealed coupling rates up to 1259.50 ± 75.98 μmol/g polymer as well as accelerated hydration of the derivatives. Comparing aminated with unmodified gellan, enhanced mucoadhesion was verified by a 32-fold increase in viscosity of polymer/mucus mixtures and by a 14-fold extended mucosal adhesion time. Tensile studies demonstrated a 9-fold higher total work of adhesion and a 3.75-fold elevated maximum detachment force. Cellular membrane was not seriously impaired. CBF studies proved a reversible inhibition due to the application of the novel derivative. According to the outlined findings, aminated gellan gum can be considered as a promising excipient for nasal dosage forms improving drug bioavailability by superior adhesive features.

Molecular dynamics study on the encapsulation and release of anti-cancer drug doxorubicin by chitosan

Doxorubicin (DOX) is a broad-spectrum anti-tumor drug, but it has certain limitations in its therapeutic effects due to poor tumor selectivity. Chitosan-based pH-sensitive polymers drug delivery systems could improve DOX's activity and selectivity against tumor cells. Understanding the atomic interaction mechanism between chitosan and DOX at different pH levels is important in the design and application of chitosan-based drug delivery systems. In this study, molecular dynamics simulations were performed to investigate the encapsulation and release of DOX by chitosan at different pH levels. Our results show that the protonation state of amine groups of chitosan and the π-π stacking interaction between the conjugated anthraquinone ring of DOX regulate the interaction behavior between chitosan and DOX. Moreover, DOX could gradually release from chitosan at acidic pH environment in tumor tissue. These results revealed the underlying atomic interaction mechanism between DOX and chitosan at various pH levels and may provide novel ideas for the design and application of chitosan-based drug delivery system.

Development of Microspheres Based on Thiol-Modified Sodium Alginate for Intestinal-Targeted Drug Delivery

Bioactive peptide drugs are mostly delivered by parenteral administration, which brings great pain and risks to patients. Oral administration is an acceptable alternative form. However, peptide drugs are extremely sensitive to the strong acidic environment in the stomach after oral administration. They would be degraded by pepsin and trypsin in the gastrointestinal tract. Herein, we present microspheres for intestinal-targeted peptides drug delivery through oral administration. Sodium alginate was reacted with l-cysteine to bring it into thiol groups. Then sodium alginate-l-cysteine conjugates were mixed with native sodium alginate and emulsified by an improved method. Ca²⁺ was used to fix the emulsion to get the microspheres. Bovine serum albumin was used as the simulating drug to assess the feasibility of microspheres as intestinal delivery carriers. The results showed that the microspheres exhibited spherical properties and narrow size distribution. The drug-loading capacity of microspheres was not compromised after thiol-modification. It is interesting that the microspheres can maintain structural integrity and hold drugs in the strong acidic environment in the stomach. Conversely, the microspheres presented sustained intestinal-targeted drugs release ability as expected. Moreover, thiol-modification further improved the adherence ability of microspheres on the inner walls of the small intestine, which is good for enhancing drug permeability. In sum, the microspheres based on thiol-modified sodium alginate have promising applications as intestinal-targeted macromolecular drug carriers.

Thiolated polymers: Bioinspired polymers utilizing one of the most important bridging structures in nature

Thiolated polymers designated "thiomers" are obtained by covalent attachment of thiol functionalities on the polymeric backbone of polymers. In 1998 these polymers were first described as mucoadhesive and in situ gelling compounds forming disulfide bonds with cysteine-rich substructures of mucus glycoproteins and crosslinking through inter- and intrachain disulfide bond formation. In the following, it was shown that thiomers are able to form disulfides with keratins and membrane-associated proteins exhibiting also cysteine-rich substructures. Furthermore, permeation enhancing, enzyme inhibiting and efflux pump inhibiting properties were demonstrated. Because of these capabilities thiomers are promising tools for drug delivery guaranteeing a strongly prolonged residence time as well as sustained release on mucosal membranes. Apart from that, thiomers are used as drugs per se. In particular, for treatment of dry eye syndrome various thiolated polymers are in development and a first product has already reached the market. Within this review an overview about the thiomer-technology and its potential for different applications is provided discussing especially the outcome of studies in non-rodent animal models and that of numerous clinical trials. Moreover, an overview on product developments is given.

Polyelectrolyte-Based Platforms for the Delivery of Peptides and Proteins

The use of peptides and proteins in the pharmaceutical field has increased dramatically over recent years. They have been especially relevant to advances in the treatment of cancer, rheumatoid arthritis, leukemia, and cardiovascular, ophthalmological, metabolic, and infectious diseases. Despite the great potential of peptides and proteins, their use in pharmaceuticals has failed to reach its full potential because of some outstanding challenges. They are unstable under storage conditions and in biological milieus, and their high molecular weight limits permeation through biological membranes. A variety of delivery systems have been investigated to overcome these limitations. Polyelectrolytes (PEs) are molecules that bear multiple negative or positive charges. These molecules play an important role in various platforms relating to the delivery of peptide/protein-based drugs and subunit vaccines. The most commonly utilized PEs include chitosan, alginate, chondroitin sulfate, and poly(γ-glutamic acid). PE-based delivery systems, such as polyelectrolyte complexes (PECs), PE-coated nanocarriers, and PE multilayers, were designed to protect peptides and proteins from degradation and facilitate their absorption. These delivery systems are especially effective when administered orally or intranasally. This review emphasizes the important role of PEs and PE-based delivery vehicles in peptide/protein-based drugs and vaccines.

Binding and mucoadhesion of sulfurated derivatives of quaternary ammonium-chitosans and their nanoaggregates: An NMR investigation

The effect of insertion of SH and S-protected groups on the binding and mucoadhesion properties of quaternary ammonium-chitosans and their nanoparticulate forms has been investigated by NMR spectroscopy. Diclofenac sodium salt has been assumed as low molecular weight probe to detect the different binding behaviour of polymeric materials; mucin from bovine submaxillary glands was selected as the model protein for differentiating their mucoadhesion. NMR proton selective relaxation rates of the probe molecule were remarkably sensitive to the presence of very low amounts of sulfurated moieties. Impact of supramolecular aggregation in nanostructured species was demonstrated as well as the relevance of S-protection.

In vitro evaluation of intravesical mucoadhesive self-emulsifying drug delivery systems

Intravesical mucoadhesive self-emulsifying drug delivery system (SEDDS) have been developed via synthesis and incorporation of S-protected chitosan CS-MNA into SEDDS. N-acetyl cysteine-6-mercaptonicotinamide (NAC-6-MNA) was synthetized via disulphide exchange reaction between N-acetyl cysteine and 6-mercaptonicotinamide dimer. NAC-6-MNA was attached to chitosan (CS) via carbodiimide mediated amide bond formation. The S-protected chitosan (CS-MNA) and chitosan (CS) were complexed with sodium dodecyl sulfate (CS-SDS and CS-MNA-SDS) and incorporated in SEDDS at a concentration of 1% (m/m). SEDDS, SEDDS-CS-SDS and SEDDS-CS-MNA-SDS were characterized regarding size and zeta potential. 6-MNA release from SEDDS-CS-MNA-SDS in presence of glutathione was evaluated. Mucoadhesive properties of these novel formulations were assessed via rheology measurements and residence time evaluation on porcine bladder. Cytotoxicity of formulations was determined on porcine bladder. S-protected chitosan displayed 465.42 ± 75.64 µmol of NAC-6-MNA per gram of polymer. SEDDS and SEDDS-CS-SDS and SEDDS-CS-MNA-SDS displayed a size of 22.5 ± 0.9, 37.4 ± 0.1 and 98.5 ± 5.7 nm at a concentration of 20% (m/v) in simulated urine pH 6.2, and a zeta potential of -5.1 ± 0.2, -1.6 ± 0.1 and -1.4 ± 0.2 mV at a concentration of 1% (m/v) in water at pH 6, respectively. 80% of MNA was released from SEDDS-CS-MNA-SDS in presence of glutathione. Viscosity of SEDDS-CS-SDS/mucus and SEDDS-CS-MNA-SDS/mucus was 6- and 18-fold higher than SEDDS/mucus after 90 min incubation. 2.6%, 5.8% and 14% of SEDDS, SEDDS-CS-SDS and SEDDS-CS-MNA-SDS remained on bladder mucosa within 120 min, respectively. No pronounced bladder cytotoxicity was observed in presence of 0.5% (m/v) formulations. According to these results, SEDDS-CS-MNA-SDS might be a promising carrier for intravesical drug administration.

Covalently binding mucoadhesive polymers: N-hydroxysuccinimide grafted polyacrylates

AIM

The aim of the study was to establish a novel type of covalently mucus-binding polymers by targeting selectively amino groups within mucus glycoproteins.

METHODS

N-Hydroxysuccinimide (NHS) was attached to carboxylic groups of polyacrylic acid (PAA). The reaction was mediated by the coupling reagent N,N'-dicyclohexylcarbodiimide (DCC) achieving polymeric NHS esters being able to form amide bonds with free amino groups. The chemical structure of the obtained conjugates was characterized via FTIR- and UV spectroscopy. Reactivity towards mucosal amino groups was evaluated UV spectrometrically upon addition of L-glycine. Furthermore, tensile force evaluations on intestinal mucosa as well as rheological experiments with mucus were performed in order to prove mucoadhesive potential.

RESULTS

Depending on the amount of NHS added to the synthesis, coupling rates of 876 to 1820 µmol NHS per gram polymer were obtained. Kinetic studies of amide bond formation showed a substrate dependent reaction velocity. Rheological synergism of PAA-NHS was proven by a 7.9-fold increased mucus viscosity compared to the control polymer. In further mucoadhesion studies PAA-NHS showed a 5.5-fold improved adhesion time compared to unmodified PAA. Tensile force evaluation confirmed these results with a 1.7-fold higher maximum detachment force (MDF) and 2.7-fold increased total work adhesion (TWA) for PAA-NHS compared to the unmodified control polymer.

CONCLUSION

The results of the present study provide strong evidence that coupling NHS to polymers could be a promising tool for the development of novel mucoadhesive excipients.

Chitosan nanopolymers: An overview of drug delivery against cancer

Cancer is becoming a major reason for death troll worldwide due to the difficulty in finding an efficient, cost effective and target specific method of treatment or diagnosis. The variety of cancer therapy used in the present scenario have painful side effects, low effectiveness and high cost, which are some major drawbacks of the available therapies. Apart from the conventional cancer therapy, nanotechnology has grown extremely towards treating cancer. Nanotechnology is a promising area of science focusing on developing target specific drug delivery system for carrying small or large active molecules to diagnose and treat cancer cells. In the field of nanoscience, Chitosan nanopolymers (ChNPs) are been emerging as a potential carrier due to their biodegradability and biocompatibility. The easy modification and versatility in administration route of ChNPs has attracted attention of researchers towards loading chemicals, proteins and gene drugs for target specific therapy of cancer cells. Therefore, the present review deals with the growing concern towards cancer therapy, introduction of ChNPs, mode of action and other strategies employed by researchers till date towards cancer treatment and diagnosis ChNPs.

Chitosan: The One and Only? Aminated Cellulose as an Innovative Option for Primary Amino Groups Containing Polymers

The aim of this study was the synthesis and in vitro characterization of aminated cellulose as alternative excipient to chitosan. The aldehyde form of cellulose was generated via the oxidative cleavage of vicinal diols by the addition of increasing concentrations of sodium periodate. The insertion of primary amines was achieved by reductive amination with ammonia. The degree of substitution was calculated via primary amino group quantification using a 2,4,6-trinitrobenzenesulfonic acid assay. Mucoadhesiveness was examined by adopting the rotating-cylinder method and tensile studies using porcine intestinal mucosa. Hydration was evaluated at pH 2-11. The successful formation of aldehydes as well as a subsequent introduction of up to 311.61 micromoles per gram of primary amines were proven to correlate with the amount of added periodate. There was a 3- to 14-fold prolongation in the mucosal residence time of the new polymer in comparison to chitosan, as measured by the rotating-cylinder method. Although cationic cellulose did not reach the maximum detachment force of chitosan, the total work of adhesion of the newly synthesized cellulose derivate was higher than that of chitosan. The higher the degree of amination, the higher the degree of hydration in neutral and alkaline aqueous media was. Compared to chitosan, the novel cationic cellulose derivative displays improved mucoadhesive properties as well as sufficient hydration at physiological pH. Therefore, aminated cellulose is a promising alternative to the cationic polymers, such as chitosan, used thus far.

Impact of mucoadhesive polymeric nanoparticulate systems on oral bioavailability of a macromolecular model drug

Nanoparticles (NP) only different in mucoadhesivity are compared for impact on drug oral bioavailability. Two polymeric NP types based on quaternary ammonium-chitosan (NP QA-Ch) and S-protected thiolated derivative thereof (NP QA-Ch-S-pro), respectively, containing the macromolecular drug model, FD4, were prepared by crosslinking each polymer with reduced MW hyaluronic acid. The structure of basic polymers was determined by H¹NMR analysis. NP were similar in size (371 ± 38 vs. 376 ± 82 nm); polydispersity index (0.39 ± 0.08 vs. 0.41 ± 0.10); zeta potential (13.4 ± 0.9 vs. 11.9 ± 1.2 mV); reversible interactions with drug (bound drug, 67 vs. 66%); encapsulation efficiency (23 ± 5 vs. 23 ± 8%); release properties (15% released in 15 h in both cases); and apparent permeation across excised rat intestine (P_app, 8.8 ± 0.8 vs. 10 ± 1 cm/s). Then the differences in NP transport ratio through mucus (TR, 0.75 vs. 0.37) and adhesion to excised rat intestinal mucosa (adsorbed fraction, 23 ± 3 vs. 45 ± 2%) were ascribed to higher mucoadhesivity of NP QA-Ch-S-pro compared to NP QA-Ch. This directly influenced drug oral bioavailability in rats (T_max, 1 vs. 2 h; AUC, 1.7 ± 0.3 vs. 2.9 ± 0.4 μg/mL min, for NP QA-Ch and NP QA-Ch-S-pro, respectively). Mucoadhesivity increases drug bioavailability by retaining NP at its absorption site and opposing its transit down the GI tract. Data on drug accumulation in rat liver allows the assertion that NP is absorbed by transcytosis across intestinal epithelium and transported from blood into liver by Kuppfer cells.

Chitosan and Its Derivatives for Application in Mucoadhesive Drug Delivery Systems

Mucoadhesive drug delivery systems are desirable as they can increase the residence time of drugs at the site of absorption/action, provide sustained drug release and minimize the degradation of drugs in various body sites. Chitosan is a cationic polysaccharide that exhibits mucoadhesive properties and it has been widely used in the design of mucoadhesive dosage forms. However, its limited mucoadhesive strength and limited water-solubility at neutral and basic pHs are considered as two major drawbacks of its use. Chemical modification of chitosan has been exploited to tackle these two issues. In this review, we highlight the up-to-date studies involving the synthetic approaches and description of mucoadhesive properties of chitosan and chitosan derivatives. These derivatives include trimethyl chitosan, carboxymethyl chitosan, thiolated chitosan, chitosan-enzyme inhibitors, chitosan-ethylenediaminetetraacetic acid (chitosan-EDTA), half-acetylated chitosan, acrylated chitosan, glycol chitosan, chitosan-catechol, methyl pyrrolidinone-chitosan, cyclodextrin-chitosan and oleoyl-quaternised chitosan. We have particularly focused on the effect of chemical derivatization on the mucoadhesive properties of chitosan. Additionally, other important properties including water-solubility, stability, controlled release, permeation enhancing effect, and in vivo performance are also described.

Entirely S-protected chitosan: A promising mucoadhesive excipient for metronidazole vaginal tablets

AIM

Synthesis and evaluation of an entirely S-protected chitosan as mucoadhesive excipient for vaginal drug delivery.

METHODS

N-acetyl-cysteine was linked to 6-mercaptonicotinamide via disulphide exchange reaction. The obtained ligand, NAC-6-MNA, was subsequently attached to chitosan by carbodiimide mediated amide bond formation in two concentrations. The synthesized S-protected chitosan was chemically characterized and mucoadhesive properties and stability against oxidation were investigated. Moreover, metronidazole tablets comprising the S-protected chitosan were evaluated regarding water uptake capacity, disintegration behaviour, residence time on vaginal mucosa, release of the encapsulated drug and antimicrobial activity.

RESULTS

S-protected chitosan displayed 160±19 (CS-MNA-160) and 320±38 (CS-MNA-320)µmol of ligand per gram of polymer. At pH 4.2, CS-MNA-160 and CS-MNA-320 showed 5.2-fold and 6.2-fold increase in mucus viscosity in comparison to unmodified chitosan (One-way ANOVA, p<.001), whereas, 9.9-fold (CS-MNA-160) and 15.6-fold (CS-MNA-320) (One-way ANOVA, p<.001) increase in viscosity was measured at pH 6. The S-protected chitosan remained stable against oxidation in presence of 0.5%v/v hydrogen peroxide. Metronidazole tablets consisting in S-protected chitosan showed prolonged residence time on vaginal mucosa and improved water uptake capacity and disintegration time in comparison to tablets consisting of unmodified chitosan. Moreover, CS-MNA-320 metronidazole tablets displayed prolonged drug release and antimicrobial activity.

CONCLUSIONS

On the basis of the achieved results, entirely S-protected chitosan represents a promising excipient for the development of metronidazole vaginal tablets.

STATEMENT OF SIGNIFICANCE

S-protected thiomers are polymers modified with thiol groups protected by aromatic ligands and characterized by strong mucoadhesive properties and high stability against oxidation. Up to date, the entirely S-protection of thiol groups was achieved via the synthesis of the ligand 2-((2-amino-2-carboxyethyl)disulfanyl)nicotinic acid) which can be directly bound to the backbone of polymers bearing carboxylic moieties as pectin. However, this ligand is not suitable for positively charged polymers due to the negative charge. In this paper, the synthesis of a suitable ligand for the entirely S-protection of positively charged polymers is presented. The first entirely S-protected chitosan was synthesized, characterized and its mucoadhesive properties were assessed. Moreover, metronidazole tablets comprising the entirely S-protected chitosan were developed and evaluated as vaginal drug delivery system.

Recent Developments in Thiolated Polymeric Hydrogels for Tissue Engineering Applications

This review focuses on the recent strategy in the preparation of thiolated polymers and fabrication of their hydrogel matrices. The mechanism involved in the synthesis of thiolated polymers and fabrication of thiolated polymer hydrogels is exemplified with suitable schematic representations reported in the recent literature. The 2-iminothiolane namely "Traut's reagent" has been widely used for effectively thiolating the natural polymers such as collagen and gelatin, which contain free amino group in their backbone. The free carboxylic acid group containing polymers such as hyaluronic acid and heparin have been thiolated by using the bifunctional molecules such as cysteamine and L-cysteine via N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide/N-hydroxysuccinimide (EDC/NHS) coupling reaction. The degree of thiolation in the polymer chain has been widely determined by using Ellman's assay method. The thiolated polymer hydrogels are prepared by disulfide bond formation (or) thiol-ene reaction (or) Michael-type addition reaction. The thiolated polymers such as thiolated gelatin are reacted with polyethylene glycol diacrylate for obtaining interpenetrating polymer network hydrogel scaffolds. Several in vitro cell culture experiments indicate that the developed thiolated polymer hydrogels exhibited biocompatibility and cellular mimicking properties. The developed hydrogel scaffolds efficiently support proliferation and differentiation of various cell types. In the present review article, the thiol-functionalized protein-based biopolymers, carbohydrate-based polymers, and some synthetic polymers have been covered with recently published research articles. In addition, the usage of new thiolated nanomaterials as a crosslinking agent for the preparation of three-dimensional tissue-engineered hydrogels is highlighted.

Development of mannose-anchored thiolated amphotericin B nanocarriers for treatment of visceral leishmaniasis

AIM

Our goal was to improve treatment outcomes for visceral leishmaniasis by designing nanocarriers that improve drug biodistribution and half-life. Thus, long-acting mannose-anchored thiolated chitosan amphotericin B nanocarrier complexes (MTC AmB) were developed and characterized.

MATERIALS & METHODS

A mannose-anchored thiolated chitosan nanocarrier was manufactured and characterized. MTC AmB was examined for cytotoxicity, biocompatibility, uptake and antimicrobial activities.

RESULTS

MTC AmB was rod shaped with a size of 362 nm. MTC AmB elicited 90% macrophage viability and 71-fold enhancement in drug uptake compared with native drug. The antileishmanial IC50 for MTC AmB was 0.02 μg/ml compared with 0.26 μg/ml for native drug.

CONCLUSION

These studies show that MTC can serve as a platform for clearance of Leishmania in macrophages.

Synthesis of thiolated polysaccharides for formation of polyelectrolyte multilayers with improved cellular adhesion

Intrinsic cross-linking is not only useful for increasing stability, but also for tailoring mechanical properties of polyelectrolyte multilayers (PEM) on implants and tissue engineering scaffolds. Here, a novel route for synthesizing thiolated chitosan (t-Chi) based on the application of 3,3'-dithiodipropionic acid was applied, while thiolated chondroitin sulfate (t-CS) was conjugated by 3,3'-dithiobis (propanoic hydrazide). Both products were subsequently reduced to obtain the free thiols. The thiol content, structural changes and degree of substitution were studied by UV-vis, FTIR, Raman and ¹H NMR spectroscopy, respectively. Chi and CS can be used for PEM formation with the layer-by-layer method, due to the cationic nature of Chi at pH values below 5.0 and the anionic character of CS. Comparative studies on the formation of native Chi/CS versus t-Chi/t-CS PEM with surface plasmon resonance and ellipsometry revealed higher layer mass. We also found that the PEM composed of t-Chi/t-CS had superior cell adhesion properties for human keratinocytes in comparison to the native PEM.

Spray-dried mucoadhesives for intravesical drug delivery using N-acetylcysteine- and glutathione-glycol chitosan conjugates

This work describes N-acetylcysteine (NAC)- and glutathione (GSH)-glycol chitosan (GC) polymer conjugates engineered as potential platform useful to formulate micro-(MP) and nano-(NP) particles via spray-drying techniques. These conjugates are mucoadhesive over the range of urine pH, 5.0-7.0, which makes them advantageous for intravesical drug delivery and treatment of local bladder diseases. NAC- and GSH-GC conjugates were generated with a synthetic approach optimizing reaction times and purification in order to minimize the oxidation of thiol groups. In this way, the resulting amount of free thiol groups immobilized per gram of NAC- and GSH-GC conjugates was 6.3 and 3.6mmol, respectively. These polymers were completely characterized by molecular weight, surface sulfur content, solubility at different pH values, substitution and swelling degree. Mucoadhesion properties were evaluated in artificial urine by turbidimetric and zeta (ζ)-potential measurements demonstrating good mucoadhesion properties, in particular for NAC-GC at pH 5.0. Starting from the thiolated polymers, MP and NP were prepared using both the Büchi B-191 and Nano Büchi B-90 spray dryers, respectively. The resulting two formulations were evaluated for yield, size, oxidation of thiol groups and ex-vivo mucoadhesion. The new spray drying technique provided NP of suitable size (<1μm) for catheter administration, low degree of oxidation, and sufficient mucoadhesion property with 9% and 18% of GSH- and NAC-GC based NP retained on pig mucosa bladder after 3h of exposure, respectively.

STATEMENT OF SIGNIFICANCE

The aim of the present study was first to optimize the synthesis of NAC-GC and GSH-GC, and preserve the oxidation state of the thiol moieties by introducing several optimizations of the already reported synthetic procedures that increase the mucoadhesive properties and avoid pH-dependent aggregation. Second, starting from these optimized thiomers, we studied the feasibility of manufacturing MP and NP by spray-drying techniques. The aim of this second step was to produce mucoadhesive drug delivery systems of adequate size for vesical administration by catheter, and comparable mucoadhesive properties with respect to the processed polymers, avoiding thiolic oxidation during the formulation. MP with acceptable size produced by spray-dryer Büchi B-191 were compared with NP made with the apparatus Nano Büchi B-90.

Thiomers and their potential applications in drug delivery

INTRODUCTION

Thiomers are the product of the immobilization of sulfhydryl-bearing ligands onto the polymer backbone of a conventional polymer, which results in a significant improvement in mucoadhesion; in situ gelation and efflux inhibition compare with unchanged polymers. Because of thiol groups, thiomers have more reactivity and enhanced protection against oxidation. Since the late 1990s, extensive work has been conducted on these promising polymeric excipients in the pharmaceutical field. Areas covered: This review covers thiomers, their classification and their different properties. Various techniques for the synthesis, purification and characterization of thiomers are described in detail. This review also encompasses their various properties such as mucoadhesion, permeation enhancement, in situ gelation and efflux inhibition, as well as different formulations based on thiomers. In addition to the use of thiomers as multifunctional excipients, this review also encompasses their use as drugs. Expert opinion: The synthesis is realized by linkage of sulfhydryl-bearing ligands but reported methods give low yields. Higher degrees of modification are not necessary and would probably lead to extreme changes in properties. Nevertheless, an accurate characterization of the final product is important. The scale-up procedure for industrial manufacturing has been adapted to produce GMP materials; Lacrimera® eye drops have already entered the European market.