Assessing graphene nanopores for sequencing DNA

Porous Nanographenes, Graphene Nanoribbons, and Nanoporous Graphene Selectively Synthesized from the Same Molecular Precursor

We demonstrate a family of molecular precursors based on 7,10-dibromo-triphenylenes that can selectively produce different varieties of atomically precise porous graphene nanomaterials through the use of different synthetic environments. Upon Yamamoto polymerization of these molecules in solution, the free rotations of the triphenylene units around the C-C bonds result in the formation of cyclotrimers in high yields. In contrast, in on-surface polymerization of the same molecules on Au(111) these rotations are impeded, and the coupling proceeds toward the formation of long polymer chains. These chains can then be converted to porous graphene nanoribbons (pGNRs) by annealing. Correspondingly, the solution-synthesized cyclotrimers can also be deposited onto Au(111) and converted into porous nanographenes (pNGs) via thermal treatment. Thus, both processes start with the same molecular precursor and end with a porous graphene nanomaterial on Au(111), but the type of product, pNG or pGNR, depends on the specific coupling approach. We also produced extended nanoporous graphenes (NPGs) through the lateral fusion of highly aligned pGNRs on Au(111) that were grown at high coverage. The pNGs can also be synthesized directly in solution by Scholl oxidative cyclodehydrogenation of cyclotrimers. We demonstrate the generality of this approach by synthesizing two varieties of 7,10-dibromo-triphenylenes that selectively produced six nanoporous products with different dimensionalities. The basic 7,10-dibromo-triphenylene monomer is amenable to structural modifications, potentially providing access to many new porous graphene nanomaterials. We show that by constructing different porous structures from the same building blocks, it is possible to tune the energy band gap in a wide range.

High-Resolution and Low-Noise Single-Molecule Sensing with Bio-Inspired Solid-State Nanopores

Solid-state nanopores have been extensively explored as single-molecule sensors, bearing the potential for the sequencing of DNA. Although they offer advantages in terms of high mechanical robustness, tunable geometry, and compatibility with existing semiconductor fabrication techniques in comparison with their biological counterparts, efforts to sequence DNA with these nanopores have been hampered by insufficient spatial resolution and high noise in the measured ionic current signal. Here we show that these limitations can be overcome by the use of solid-state nanopores featuring a thin, narrow constriction as the sensing region, inspired by biological protein nanopores that have achieved notable success in DNA sequencing. Our extensive molecular dynamics simulations show that these bio-inspired nanopores can provide high spatial resolution equivalent to 2D material nanopores and, meanwhile, significantly inhibit noise levels. A theoretical model is also provided to assess the performance of the bio-inspired nanopore, which could guide its design and optimization.

Controllable Fabrication of Sub-10 nm Graphene Nanopores via Helium Ion Microscopy and DNA Detection

Solid-state nanopores have become a prominent tool in the field of single-molecule detection. Conventional solid-state nanopores are thick, which affects the spatial resolution of the detection results. Graphene is the thinnest 2D material and has the highest spatial detection resolution. In this study, a graphene membrane chip was fabricated by combining a MEMS process with a 2D material wet transfer process. Raman spectroscopy was used to assess the quality of graphene after the transfer. The mechanism behind the influence of the processing dose and residence time of the helium ion beam on the processed pore size was investigated. Subsequently, graphene nanopores with diameters less than 10 nm were fabricated via helium ion microscopy. DNA was detected using a 5.8 nm graphene nanopore chip, and the appearance of double-peak signals on the surface of 20 mer DNA was successfully detected. These results serve as a valuable reference for nanopore fabrication using 2D material for DNA analysis.

Interplay of graphene-DNA interactions: Unveiling sensing potential of graphene materials

Graphene-based materials and DNA probes/nanostructures have emerged as building blocks for constructing powerful biosensors. Graphene-based materials possess exceptional properties, including two-dimensional atomically flat basal planes for biomolecule binding. DNA probes serve as excellent selective probes, exhibiting specific recognition capabilities toward diverse target analytes. Meanwhile, DNA nanostructures function as placement scaffolds, enabling the precise organization of molecular species at nanoscale and the positioning of complex biomolecular assays. The interplay of DNA probes/nanostructures and graphene-based materials has fostered the creation of intricate hybrid materials with user-defined architectures. This advancement has resulted in significant progress in developing novel biosensors for detecting DNA, RNA, small molecules, and proteins, as well as for DNA sequencing. Consequently, a profound understanding of the interactions between DNA and graphene-based materials is key to developing these biological devices. In this review, we systematically discussed the current comprehension of the interaction between DNA probes and graphene-based materials, and elucidated the latest advancements in DNA probe-graphene-based biosensors. Additionally, we concisely summarized recent research endeavors involving the deposition of DNA nanostructures on graphene-based materials and explored imminent biosensing applications by seamlessly integrating DNA nanostructures with graphene-based materials. Finally, we delineated the primary challenges and provided prospective insights into this rapidly developing field. We envision that this review will aid researchers in understanding the interactions between DNA and graphene-based materials, gaining deeper insight into the biosensing mechanisms of DNA-graphene-based biosensors, and designing novel biosensors for desired applications.

Label-Free Imaging of DNA Interactions with 2D Materials

Two-dimensional (2D) materials offer potential as substrates for biosensing devices, as their properties can be engineered to tune interactions between the surface and biomolecules. Yet, not many methods can measure these interactions in a liquid environment without introducing labeling agents such as fluorophores. In this work, we harness interferometric scattering (iSCAT) microscopy, a label-free imaging technique, to investigate the interactions of single molecules of long dsDNA with 2D materials. The millisecond temporal resolution of iSCAT allows us to capture the transient interactions and to observe the dynamics of unlabeled DNA binding to a hexagonal boron nitride (hBN) surface in solution for extended periods (including a fraction of 10%, of trajectories lasting longer than 110 ms). Using a focused ion beam technique to engineer defects, we find that DNA binding affinity is enhanced at defects; when exposed to long lanes, DNA binds preferentially at the lane edges. Overall, we demonstrate that iSCAT imaging is a useful tool to study how biomolecules interact with 2D materials, a key component in engineering future biosensors.

Effect of surface functionalization on DNA sequencing using MXene-based nanopores

As one of the most promising types of label-free nanopores has great potential for DNA sequencing via fast detection of different DNA bases. As one of the most promising types of label-free nanopores, two-dimensional nanopore materials have been developed over the past two decades. However, how to detect different DNA bases efficiently and accurately is still a challenging problem. In the present work, the translocation of four homogeneous DNA strands (i.e., poly(A)20, poly(C)20, poly(G)20, and poly(T)20) through two-dimensional transition-metal carbide (MXene) membrane nanopores with different surface terminal groups is investigated via all-atom molecular dynamics simulations. Interestingly, it is found that the four types of bases can be distinguished by different ion currents and dwell times when they are transported through the Ti3C2(OH)2 nanopore. This is mainly attributed to the different orientation and position distributions of the bases, the hydrogen bonding inside the MXene nanopore, and the interaction of the ssDNA with the nanopore. The present study enhances the understanding of the interaction between DNA strands and MXene nanopores with different functional groups, which may provide useful guidelines for the design of MXene-based devices for DNA sequencing in the future.

Unveiling DNA Translocation in Pristine Graphene Nanopores: Understanding Pore Clogging via Polarizable Simulations

Graphene has garnered remarkable attention in recent years as an attractive nanopore membrane for rapid and accurate sequencing of DNA. The inherent characteristics of graphene offer exquisite experimental control over pore dimensions, encompassing both the width (pore diameter) and height. Despite these promising prospects, the practical deployment of pristine graphene nanopores for DNA sequencing has encountered a formidable challenge in the form of pore clogging, which is primarily attributed to hydrophobic interactions. However, a comprehensive understanding of the atomistic origins underpinning this clogging phenomenon and the nuanced impact of individual nucleobase identities on clogging dynamics remain an underexplored domain. Elucidating the atomistic intricacies governing pore clogging is pivotal to devising strategies for its mitigation and advancing our understanding of graphene nanopore behavior. We harness Drude polarizable simulations to systematically dissect the nucleobase-dependent mechanisms that play a pivotal role in nanopore clogging. We unveil nucleobase-specific interactions that illuminate the multifaceted roles played by both hydrophobic and electrostatic forces in driving nanopore clogging events. Notably, the Drude simulations also unveil the bias-dependent translocation dynamics and its pivotal role in alleviating pore clogging─a facet that remains significantly underestimated in conventional additive (nonpolarizable) simulations. Our findings underscore the indispensability of incorporating polarizability to faithfully capture the intricate dynamics governing graphene nanopore translocation phenomena, thus deepening our insights into this crucial field.

Exploring the non-monotonic DNA capture behavior in a charged graphene nanopore

Nanopore-based biomolecule detection has emerged as a promising and sought-after innovation, offering high throughput, rapidity, label-free analysis, and cost-effectiveness, with potential applications in personalized medicine. However, achieving efficient and tunable biomolecule capture into the nanopore remains a significant challenge. In this study, we employ all-atom molecular dynamics simulations to investigate the capture of double-stranded DNA (dsDNA) molecules into graphene nanopores with varying positive charges. We discover a non-monotonic relationship between the DNA capture rate and the charge of the graphene nanopore. Specifically, the capture rate initially decreases and then increases with an increase in nanopore charge. This behavior is primarily attributed to differences in the electrophoretic force, rather than the influence of electroosmosis or counterions. Furthermore, we also observe this non-monotonic trend in various ionic solutions, but not in ionless solutions. Our findings shed light on the design of novel DNA sequencing devices, offering valuable insights into enhancing biomolecule capture rates in nanopore-based sensing platforms.

Exploring the Synergies of Single-Molecule Fluorescence and 2D Materials Coupled by DNA

The world of 2D materials is steadily growing, with numerous researchers attempting to discover, elucidate, and exploit their properties. Approaches relying on the detection of single fluorescent molecules offer a set of advantages, for instance, high sensitivity and specificity, that allow the drawing of conclusions with unprecedented precision. Herein, it is argued how the study of 2D materials benefits from fluorescence-based single-molecule modalities, and vice versa. A special focus is placed on DNA, serving as a versatile adaptor when anchoring single dye molecules to 2D materials. The existing literature on the fruitful combination of the two fields is reviewed, and an outlook on the additional synergies that can be created between them provided.

Nanopore actuation of a DNA-tracked nanovehicle

As a kind of nanomachine that has great potential for applications in nanoscale sensing and manipulation, nanovehicles with unique shapes and functions have received extensive attention in recent years. Different from the existing common method of using synthetic chemistry to design and manufacture a nanovehicle, here we theoretically report a molecularly assembled DNA-tracked nanovehicle that can move on a solid-state surface using molecular dynamics simulations. A graphene membrane with four nanopores acts as the chassis of the nanoscale vehicle, and two circular ssDNAs across the nanopores serve as the wheels. The electroosmotic flows induced by independently charged nanopores with different surface charge densities under external electric fields were found to be the main power to actuate the controlled rotary motion of circular ssDNAs across every two nanopores. By tuning the rotary speed of each circular ssDNA, the linear and turning movements of the designed nanovehicle were realized. The designed nanovehicle makes it possible to have access to almost everywhere in the human body, which would lead to significant breakthroughs in the fields of nanoscale surgery, drug delivery and so on. The research not only enriches the family of nanorobots, but also opens another way for designing nanovehicles.

Adsorption of DNA nucleobases on single-layer Ti3C2 MXene and graphene: vdW-corrected DFT and NEGF studies

We investigated the interaction of DNA nucleobases [adenine (A), guanine (G), thymine (T), and cytosine (C)] with single-layer Ti3C2 MXene using Van der Waals (vdW)-corrected density functional theory and non-equilibrium Green's function methods. All calculations were benchmarked against graphene. We showed that depending on the initial vertical height of a nucleobase above the Ti3C2 surface, two interaction mechanisms are possible, namely, physisorption and chemisorption. For graphene, DNA nucleobases always physisorbed onto the graphene surface irrespective of the initial vertical height of the nucleobase above the graphene sheet. The PBE+vdW binding energies for graphene are high (0.55-0.74 eV) and follow the order G > A > T > C, with adsorption heights in the range of 3.16-3.22 Å, indicating strong physisorption. For Ti3C2, the PBE+vdW binding energies are relatively weaker (0.16-0.20 eV) and follow the order A > G = T > C, with adsorption heights in the range of 5.51-5.60 Å, indicating weak physisorption. The binding energies for chemisorption follow the order G > A > T > C, which is the same order for physisorption. The binding energy values (5.3-7.5 eV) indicate very strong chemisorption (∼40 times larger than the physisorption binding energies). Furthermore, our band structure and electronic transport analysis showed that for physisorption, there is neither significant variation in the band structure nor modulation in the transmission function and device density of states. The relatively weak physisorption and strong chemisorption show that Ti3C2 might not be capable of identifying DNA nucleobases using the physisorption method.

DNA sequencing via molecular dynamics simulation with functionalized graphene nanopore

Through this research, functionalized graphene nanopores are used to verify how effective such an apparatus for DNA sequencing is. The circular symmetric pores are functionalized with hydrogen and a hydroxyl group bonded with carbon atoms of the pore rim. Plus, two adenine bases are also put at the rim perimeter to verify whether such a combination would lead to base detection. A homopolymer of single-stranded DNA (ssDNA) is pulled through a nanopore using steered molecular dynamics (SMD) simulation. Pulling force profile, moving fashion of ssDNA in irreversible DNA pulling as well as the base orientation during translocation relative to the graphene plane, called beta angle, are assessed. Based on the studied parameters, SMD force, and base orientation, the hydrogenated and hydroxylated pores do not show a clear distinction between bases, while the adenine-functionalized pore can distinguish between adenine and cytosine. Therefore, there may be some hope for achieving single-base sequencing, while further research is needed.

Ionic Signal Amplification of DNA in a Nanopore

Ionic signal amplification is a key challenge for single-molecule analyses by solid-state nanopore sensing. Here, a permittivity gradient approach for amplifying ionic blockade characteristics of DNA in a nanofluidic channel is reported. The transmembrane ionic current response is found to change substantially through modifying the liquid permittivity at one side of a pore with an organic solvent. Imposing positive liquid permittivity gradients with respect to the direction of DNA electrophoresis, this study observes the resistive ionic signals to become larger due to the varying contributions of molecular counterions. On the contrary, negative gradients render adverse effects causing conductive ionic current pulses upon polynucleotide translocations. Most importantly, both the positive and negative gradients are demonstrated to be capable of amplifying the ionic signals by an order of magnitude with a 1.3-fold difference in the transmembrane liquid dielectric constants. This phenomenon allows a novel way to enhance the single-molecule sensitivity of nanopore sensing that may be useful in analyzing secondary structures and genome sequence of DNA by ionic current measurements.

Which 2D Material is Better for DNA Detection: Graphene, MoS2, or MXene?

Despite much research on characterizing 2D materials for DNA detection with nanopore technology, a thorough comparison between the performance of different 2D materials is currently lacking. In this work, using extensive molecular dynamics simulations, we compare nanoporous graphene, MoS₂ and titanium carbide MXene (Ti₃C₂) for their DNA detection performance and sensitivity. The ionic current and residence time of DNA are characterized in each nanoporous materials by performing hundreds of simulations. We devised two statistical measures including the Kolmogorov-Smirnov test and the absolute pairwise difference to compare the performance of nanopores. We found that graphene nanopore is the most sensitive membrane for distinguishing DNA bases. The MoS₂ is capable of distinguishing the A and T bases from the C and G bases better than graphene and MXene. Physisorption and the orientation of DNA in nanopores are further investigated to provide molecular insight into the performance characteristics of different nanopores.

Extraction of Dielectric Permittivity from Atomistic Molecular Dynamics Simulations and Microwave Measurements

The design of new biotechnology depends on the prediction and measurement of the electrical properties of biomolecules. The dielectric permittivity, in particular, is highly important for the design of microwave systems for diagnostics, yet this property is rarely explicitly targeted during the development of biomolecular force fields for molecular dynamics (MD) simulations. In order to explore the ability of existing force fields to reproduce the frequency-dependent permittivity, we carried out MD simulations of various aqueous solutions, including pure water, isopropyl alcohol, alanine, and the protein ubiquitin. The TIP3P, TIP4P, TIP4P/ε, and SWM4-NDP water models were used along with the CHARMM36m and Drude protein force fields. An experimental setup using a truncated coaxial line was created to measure the permittivity of the same solutions to check for measure-model agreement. We found that one of the nonpolarizable force fields (TIP4P/ε + CHARMM36m) and the polarizable force fields (SWM4-NDP + Drude) closely agree with experimental results. This demonstrates the strength of the tuned TIP4P/ε water model, as well as the physical validity of polarizable force fields in capturing dielectric permittivity. This represents an important step toward the predictive design of biosensors.

Theoretical Design of a Janus-Nanoparticle-Based Sandwich Assay for Nucleic Acids

Nanoparticles exhibit diverse self-assembly attributes and are expected to be applicable under unique settings. For instance, biomolecules can be sandwiched between dimer nanoparticles and detected by surface-enhanced Raman scattering. Controlling the gap between extremely close dimers and stably capturing the target molecule in the gap are crucial aspects of this strategy. Therefore, polymer-tethered nanoparticles (PTNPs), which show promise as high-performance materials that exhibit the attractive features of both NPs and polymers, were targeted in this study to achieve stable biomolecule sensing. Using coarse-grained molecular dynamics simulations, the dependence of the PTNP interactions on the length of the grafted polymer, graft density, and coverage ratio of a hydrophobic tether were examined. The results indicated that the smaller the tether length and graft density, the smaller was the distance between the PTNP surfaces (Rsurf). In contrast, Rsurf decreased as the coverage ratio of the hydrophobic surface (ϕ) increased. The sandwiching probability of the sensing target increased in proportion to the coverage ratio. At high ϕ values, the PTNPs aggregated into three or more particles, which hindered their sensing attributes. These results provide fundamental insight into the sensing applications of NPs and demonstrate the usefulness of PTNPs in sensing biomolecules.

Understanding interactions between biomolecules and two-dimensional nanomaterials using in silico microscopes

Two-dimensional (2D) nanomaterials such as graphene are increasingly used in research and industry for various biomedical applications. Extensive experimental and theoretical studies have revealed that 2D nanomaterials are promising drug delivery vehicles, yet certain materials exhibit toxicity under biological conditions. So far, it is known that 2D nanomaterials possess strong adsorption propensities for biomolecules. To mitigate potential toxicity and retain favorable physical and chemical properties of 2D nanomaterials, it is necessary to explore the underlying mechanisms of interactions between biomolecules and nanomaterials for the subsequent design of biocompatible 2D nanomaterials for nanomedicine. The purpose of this review is to integrate experimental findings with theoretical observations and facilitate the study of 2D nanomaterial interaction with biomolecules at the molecular level. We discuss the current understanding and progress of 2D nanomaterial interaction with proteins, lipid membranes, and DNA based on molecular dynamics (MD) simulation. In this review, we focus on the 2D graphene nanosheet and briefly discuss other 2D nanomaterials. With the ever-growing computing power, we can image nanoscale processes using MD simulation that are otherwise not observable in experiment. We expect that molecular characterization of the complex behavior between 2D nanomaterials and biomolecules will help fulfill the goal of designing effective 2D nanomaterials as drug delivery platforms.

Single nucleobase identification for transversally-confined ssDNA using longitudinal ionic currents

High-fidelity DNA sequencing using solid-state nanopores remains a big challenge, partly due to difficulties related to efficient molecular capture and subsequent control of the dwell time. To help address these issues, here we propose a sequencing platform consisting of stacked two-dimensional materials with tailored structures containing a funnel-shaped step defect and a nanopore drilled inside the nanochannel. Our all-atom molecular dynamics (MD) simulations showed that, assisted by the step defect, single-stranded DNA (ssDNA) can be transported to the nanopore in a deterministic way by pulsed transversal electric fields. Furthermore, different types of DNA bases can reside in the pore for a sufficiently long time which can be successfully differentiated by longitudinal ionic currents. By using the decoupled driving forces for ssDNA transport and ionic current measurements, this approach holds potential for high-fidelity DNA sequencing.

Tailoring Nanoporous Graphene via Machine Learning: Predicting Probabilities and Formation Times of Arbitrary Nanopore Shapes

Nanopores in graphene, a 2D material, are currently being explored for various applications, such as gas separation, water desalination, and DNA sequencing. The shapes and sizes of nanopores play a major role in determining the performance of devices made out of graphene. However, given an arbitrary nanopore shape, anticipating its creation probability and formation time are challenging inverse problems, solving which could help develop theoretical models for nanoporous graphene and guide experiments in tailoring pore sizes/shapes. In this work, we develop a machine learning (ML) framework to predict these target variables, based on data generated using kinetic Monte Carlo simulations and chemical graph theory. Thereby, we enable the rapid quantification of the ease of formation of a given nanopore shape in graphene via silicon-catalyzed electron-beam etching and provide an experimental handle to realize it in practice. We use structural features such as the number of carbon atoms removed, the number of edge atoms, the diameter of the nanopore, and its shape factor, which can be readily extracted from the nanopore shape. We show that the trained models can accurately predict nanopore probabilities and formation times with R2 values on the test set of 0.97 and 0.95, respectively. Not only that, we obtain physical insight into the working of the model and discuss the role played by the various structural features in modulating nanopore formation. Overall, our work provides a solid foundation for experimental studies to manipulate nanopore sizes/shapes and for theoretical studies to consider realistic structures of nanopores in graphene.

Single Molecule DNA Analysis Based on Atomic-Controllable Nanopores in Covalent Organic Frameworks

We explored the application of two-dimensional covalent organic frameworks (2D COFs) in single molecule DNA analysis. Two ultrathin COF nanosheets were exfoliated with pore sizes of 1.1 nm (COF-1.1) and 1.3 nm (COF-1.3) and covered closely on a quartz nanopipette with an orifice of 20 ± 5 nm. COF nanopores exhibited high size selectivity for fluorescent dyes and DNA molecules. The transport of long (calf thymus DNA) and short (DNA-80) DNA molecules through the COF nanopores was studied. Because of the strong interaction between DNA bases and the organic backbones of COFs, the DNA-80 was transported through the COF-1.1 nanopore at a speed of 270 μs/base, which is the slowest speed ever observed compared with 2D inorganic nanomaterials. This study shows that the COF nanosheet can work individually as a nanopore monomer with controllable pore size like its biological counterparts.

Two-dimensional material-based virus detection

Cost-effective, rapid, and accurate virus detection technologies play key roles in reducing viral transmission. Prompt and accurate virus detection enables timely treatment and effective quarantine of virus carrier, and therefore effectively reduces the possibility of large-scale spread. However, conventional virus detection techniques often suffer from slow response, high cost or sophisticated procedures. Recently, two-dimensional (2D) materials have been used as promising sensing platforms for the high-performance detection of a variety of chemical and biological substances. The unique properties of 2D materials, such as large specific area, active surface interaction with biomolecules and facile surface functionalization, provide advantages in developing novel virus detection technologies with fast response and high sensitivity. Furthermore, 2D materials possess versatile and tunable electronic, electrochemical and optical properties, making them ideal platforms to demonstrate conceptual sensing techniques and explore complex sensing mechanisms in next-generation biosensors. In this review, we first briefly summarize the virus detection techniques with an emphasis on the current efforts in fighting again COVID-19. Then, we introduce the preparation methods and properties of 2D materials utilized in biosensors, including graphene, transition metal dichalcogenides (TMDs) and other 2D materials. Furthermore, we discuss the working principles of various virus detection technologies based on emerging 2D materials, such as field-effect transistor-based virus detection, electrochemical virus detection, optical virus detection and other virus detection techniques. Then, we elaborate on the essential works in 2D material-based high-performance virus detection. Finally, our perspective on the challenges and future research direction in this field is discussed.

Nanopores in Graphene and Other 2D Materials: A Decade's Journey toward Sequencing

Nanopore techniques offer a low-cost, label-free, and high-throughput platform that could be used in single-molecule biosensing and in particular DNA sequencing. Since 2010, graphene and other two-dimensional (2D) materials have attracted considerable attention as membranes for producing nanopore devices, owing to their subnanometer thickness that can in theory provide the highest possible spatial resolution of detection. Moreover, 2D materials can be electrically conductive, which potentially enables alternative measurement schemes relying on the transverse current across the membrane material itself and thereby extends the technical capability of traditional ionic current-based nanopore devices. In this review, we discuss key advances in experimental and computational research into DNA sensing with nanopores built from 2D materials, focusing on both the ionic current and transverse current measurement schemes. Challenges associated with the development of 2D material nanopores toward DNA sequencing are further analyzed, concentrating on lowering the noise levels, slowing down DNA translocation, and inhibiting DNA fluctuations inside the pores. Finally, we overview future directions of research that may expedite the emergence of proof-of-concept DNA sequencing with 2D material nanopores.

Recent Progress in the Transfer of Graphene Films and Nanostructures

The one-atom-thick graphene has excellent electronic, optical, thermal, and mechanical properties. Currently, chemical vapor deposition (CVD) graphene has received a great deal of attention because it provides access to large-area and uniform films with high-quality. This allows the fabrication of graphene based-electronics, sensors, photonics, and optoelectronics for practical applications. Zero bandgap, however, limits the application of a graphene film as electronic transistor. The most commonly used bottom-up approaches have achieved efficient tuning of the electronic bandgap by customizing well-defined graphene nanostructures. The postgrowth transfer of graphene films/nanostructures to a certain substrate is crucial in utilizing graphene in applicable devices. In this review, the basic growth mechanism of CVD graphene is first introduced. Then, recent advances in various transfer methods of as-grown graphene to target substrates are presented. The fabrication and transfer methods of graphene nanostructures are also provided, and then the transfer-related applications are summarized. At last, the challenging issues and the potential transfer-free approaches are discussed.

Ozark Graphene Nanopore for Efficient Water Desalination

A nanoporous graphene membrane is crucial to energy-efficient reverse osmosis water desalination given its high permeation rate and ion selectivity. However, the ion selectivity of the common circular graphene nanopore is dependent on the pore size and scales inversely with the water permeation rate. Larger, circular graphene nanopores give rise to the high water permeation rate but compromise the ability to reject ions. Therefore, the pursuit of a higher permeation rate while maintaining high ion selectivity can be challenging. In this work, we discover that the geometry of graphene nanopore can play a significant role in its water desalination performance. We demonstrate that the ozark graphene nanopore, which has an irregular slim shape, can reject over 12% more ions compared with a circular nanopore with the same water permeation rate. To reveal the physical reason behind the outstanding performance of the ozark nanopore, we compared it with circular, triangular, and rhombic pores from perspectives including interfacial water density, energy barrier, water/ion distribution in pores, the ion-water RDF in pores, and the hydraulic diameter. The ozark graphene nanopore further explores the potential of graphene for efficient water desalination.

Spontaneous DNA translocation through a van der Waals heterostructure nanopore for single-molecule detection

Solid-state nanopore detection and sequencing of a single molecule offers a new paradigm because of its several well-recognized features such as long reads, high throughput, high precision and direct analyses. However, several key technical challenges are yet to be addressed, especially the abilities to control the speed and direct the translocation of the target molecules. In this work, using molecular dynamics (MD) simulations, we found a spontaneous translocation of single-stranded DNA (ssDNA) through a van der Waals (vdW) heterostructure nanopore formed by stacking two graphenic materials, namely those of BC₃ and C₃N. Our results showed that, without using an external stimulus, ssDNA can be spontaneously transported through such a vdW nanopore from its BC₃ side to its C₃N side, with the C₃N surface demonstrating a stronger capability than the BC₃ surface to attract DNA bases. Thus, the distinct binding strengths of BC₃ and C₃N were concluded to drive the ssDNA translocation. The results indicated the vdW forces playing a leading role during the translocation process. Our simulations also showed, at the edges of the nanopore, a clear energy barrier for nucleotides, resulting in a translocation speed slowed to a value of 0.2 μs per base, i.e., twice as slow as that indicated for the latest published methods. The present findings provide a new architecture for biomolecule detection and sequencing, which may be considered some of the most important functions of nanomaterials in biological and chemical analyses.

Nanopores in Atomically Thin 2D Nanosheets Limit Aqueous Single-Stranded DNA Transport

Nanopores in 2D materials are highly desirable for DNA sequencing, yet achieving single-stranded DNA (ssDNA) transport through them is challenging. Using density functional theory calculations and molecular dynamics simulations we show that ssDNA transport through a pore in monolayer hexagonal boron nitride (h-BN) is marked by a basic nanomechanical conflict. It arises from the notably inhomogeneous flexural rigidity of ssDNA and causes high friction via transient DNA desorption costs exacerbated by solvation effects. For a similarly sized pore in bilayer h-BN, its self-passivated atomically smooth edge enables continuous ssDNA transport. Our findings shed light on the fundamental physics of biopolymer transport through pores in 2D materials.

Synthesis of holey graphene for advanced nanotechnological applications

Holey or porous graphene, a structural derivative of graphene, has attracted immense attention due to its unique properties and potential applications in different branches of science and technology. In this review, the synthesis methods of holey or porous graphene/graphene oxide are systematically summarized and their potential applications in different areas are discussed. The process–structure–applications are explained, which helps relate the synthesis approaches to their corresponding key applications. The review paper is anticipated to benefit the readers in understanding the different synthesis methods of holey graphene, their key parameters to control the pore size distribution, advantages and limitations, and their potential applications in various fields.

The review paper presents a systematic understanding of different synthesis routes to obtain holey graphene, its properties, and key applications in different fields. The article also evaluates the current progress and future opportunities of HG.

Deep Learning-Enhanced Nanopore Sensing of Single-Nanoparticle Translocation Dynamics

Noise is ubiquitous in real space that hinders detection of minute yet important signals in electrical sensors. Here, the authors report on a deep learning approach for denoising ionic current in resistive pulse sensing. Electrophoretically-driven translocation motions of single-nanoparticles in a nano-corrugated nanopore are detected. The noise is reduced by a convolutional auto-encoding neural network, designed to iteratively compare and minimize differences between a pair of waveforms via a gradient descent optimization. This denoising in a high-dimensional feature space is demonstrated to allow detection of the corrugation-derived wavy signals that cannot be identified in the raw curves nor after digital processing in frequency domains under the given noise floor, thereby enabled in-situ tracking to electrokinetic analysis of fast-moving single- and double-nanoparticles. The ability of the unlabeled learning to remove noise without compromising temporal resolution may be useful in solid-state nanopore sensing of protein structure and polynucleotide sequence.

DNA Detection with Single-Layer Ti3C2 MXene Nanopore

Nanopore based sequencing is an exciting alternative to the conventional sequencing methods as it allows for high-throughput sequencing with lower reagent costs and time requirements. Biological nanopores, such as α-hemolysin, are subject to breakdown under thermal, electrical, and mechanical stress after being used millions of times. On the contrary, two-dimensional (2D) nanomaterials have been explored as a solid-state platform for the sequencing of DNA. Their subnanometer thickness and outstanding mechanical properties have made possible the high-resolution and high-signal-to-noise ratio detection of DNA, but such a performance is dependent on the type of nanomaterial selected. Solid-state nanopores of graphene, Si₃N₄, and MoS₂ have been studied as potential candidates for DNA detection. However, it is important to understand the sensitivity and characterization of these solid-state materials for nanopore based detection. Recent developments in the synthesis of MXene have inspired our interest in its application as a nanopore based DNA detection membrane. Here, we simulate the metal carbide, MXene (Ti₃C₂), with single stranded DNA to understand its interactions and the efficiency of MXene as a putative material for the development of a nanopore based detection platform. Using molecular dynamics (MD) simulations, we present evidence that a MXene based nanopore is able to detect the different types of DNA bases. We have successfully identified features to differentiate the translocation of different types of DNA bases across the nanopore.

Light-Nucleotide versus Ion-Nucleotide Interactions for Single-Nucleotide Resolution

Several parallel reads of ionic currents through multiple CsgG nanopores provide information about ion-nucleotide interactions for sequencing single-stranded DNA (ss-DNA) using base-calling algorithms. However, the information in ion-nucleotide interactions seems insufficient for single-read nanopore DNA sequencing. Here we report discriminative light-nucleotide interactions calculated from density functional theory (DFT), which are compared with ionic currents obtained from molecular dynamics (MD) simulations. The MD simulations were performed on a system containing a transverse nanochannel and a longitudinal solid state nanopore. We show that both of the transverse and longitudinal ionic currents during the translocation of A₁₆, G₁₆, T₁₆, and C₁₆ through the nanopore, overlapped widely. On the other hand, the UV-vis and Raman spectra of different types of single nucleotides, nucleosides, and nucleobases show relatively higher resolution than the ionic currents. Light-nucleotide interactions provide better information for characterizing the nucleotides in comparison to ion-nucleotide interactions for nanopore DNA sequencing. This can be realized by using optical techniques including surface-enhanced Raman spectroscopy (SERS) or tip-enhanced Raman spectroscopy (TERS), while plasmon excitation can be used to localize light and control the rate of nucleotide flow.

Detection of nucleotides in hydrated ssDNA via 2D h-BN nanopore with ionic-liquid/salt-water interface

Accomplishing slow translocation speed with high sensitivity has been the most critical mission for solid-state nanopore (SSN) device to electrically detect nucleobases in ssDNA. In this study, a method to detect nucleobases of ssDNA using a 2D SSN is introduced by considerably reducing the translocation speed and effectively increasing its sensitivity. The ultra-thin titanium dioxide coated hexagonal boron nitride nanopore was fabricated, along with an ionic-liquid 1-butyl-3-methylimidazolium hexafluorophosphate/2.0 M KCl aqueous (cis/trans) interface, for increasing both the spatial and the temporal resolutions. As the ssDNA molecules entered the nanopore, a brief surge of electrical conductivity occurred, which was followed by multiple resistive pulses from nucleobases during the translocation of ssDNA and another brief current surge flagging the exit of the molecule. The continuous detection of nucleobases using a 2D SSN device is a novel achievement: the water molecules bound to ssDNA increased the molecular conductivity and amplified electrical signals during the translocation. Along with the experiment, computational simulations using COMSOL Multiphysics are presented to explain the pivotal role of water molecules bound to ssDNA to detect nucleobases using a 2D SSN.

Polarization influences the evolution of nucleobase-graphene interactions

In recent years, graphene has attracted attention from researchers as an atomistically thin solid state material for the study on the self-assembly of nucleobases. Non-covalent interactions between nucleobases and graphene sheets play a fundamental role in understanding the self-assembly of nucleobases on the graphene sheet. A fundamental understanding of the effect of molecular polarizability on these non-covalent interactions between the nucleobases and the underlying graphene sheet is absent in the literature. In this paper, we present the results from polarizable molecular dynamics simulation studies to understand the effect of polarization on the strength of non-covalent interactions. To this end, we report the development of Drude parameters for describing the polarizable graphene sheet. The developed parameters were used to study the self-aggregation phenomenon of nucleobases on a graphene support. We observe a significant change in the interaction patterns upon the inclusion of polarization into the system, with polarizable simulations yielding results that closely resemble the experimental studies. Two of the key observations were the probability of the formation of stacks in guanine-rich systems, and the spontaneous formation of H-bonded structures over the graphene sheet, which allude to the importance of the DNA sequence and composition. Both these effects were not observed in the additive simulations. The present study sheds light on the effect of polarization on the adsorption of DNA nucleobases on a graphene sheet, but the methodology can be extended to include a variety of small molecules and complete DNA strands.

Graphene for Biosensing Applications in Point-of-Care Testing

Graphene and graphene-related materials (GRMs) exhibit a unique combination of electronic, optical, and electrochemical properties, which make them ideally suitable for ultrasensitive and selective point-of-care testing (POCT) devices. POCT device-based applications in diagnostics require test results to be readily accessible anywhere to produce results within a short analysis timeframe. This review article provides a summary of methods and latest developments in the field of graphene and GRM-based biosensing in POCT and an overview of the main applications of the latter in nucleic acids and enzymatic biosensing, cell detection, and immunosensing. For each application, we discuss scientific and technological advances along with the remaining challenges, outlining future directions for widespread use of this technology in biomedical applications.

DNA Translocation through Vertically Stacked 2D Layers of Graphene and Hexagonal Boron Nitride Heterostructure Nanopore

Cost-effective, fast, and reliable DNA sequencing can be enabled by advances in nanopore-based methods, such as the use of atomically thin graphene membranes. However, strong interaction of DNA bases with graphene leads to undesirable effects such as sticking of DNA strands to the membrane surface. While surface functionalization is one way to counter this problem, here, we present another solution based on a heterostructure nanopore system, consisting of a monolayer of graphene and hexagonal boron nitride (hBN) each. Molecular dynamics studies of DNA translocation through this heterostructure nanopore revealed a surprising and crucial influence of the heterostructure layer order in controlling the base specific signal variability. Specifically, the heterostructure with graphene on top of hBN had nearly 3-10× lower signal variability than the one with hBN on top of graphene. Simulations point to the role of differential underside sticking of DNA bases as a possible reason for the observed influence of the layer order. Our studies can guide the development of experimental systems to study and exploit DNA translocation through two-dimensional heterostructure nanopores for single molecule sequencing and sensing applications.

High-Fidelity Capture, Threading, and Infinite-Depth Sequencing of Single DNA Molecules with a Double-Nanopore System

Nanopore sequencing of nucleic acids has an illustrious history of innovations that eventually made commercial nanopore sequencing possible. Nevertheless, the present nanopore sequencing technology leaves much room for improvement, especially with respect to accuracy of raw reads and detection of nucleotide modifications. Double-nanopore sequencing-an approach where a DNA molecule is pulled back and forth by a tug-of-war of two nanopores-could potentially improve single-molecule read accuracy and modification detection by offering multiple reads of the same DNA fragment. One principle difficulty in realizing such a technology is threading single-stranded DNA through both nanopores. Here, we describe and demonstrate through simulations a nanofluidic system for loading and threading DNA strands through a double-nanopore setup with nearly 100% fidelity. The high-efficiency loading is realized by using hourglass-shaped side channels that not only deliver the molecules to the nanopore but also retain molecules that missed the nanopore at the first passage to attempt the nanopore capture again. The second nanopore capture is facilitated by an orthogonal microfluidic flow that unravels the molecule captured by the first nanopore and delivers it to the capture volume of the second nanopore. We demonstrate the potential utility of our double-nanopore system for DNA sequencing by simulating repeat back-and-forth motion-flossing-of a DNA strand through the double-nanopore system. We show that repeat exposure of the same DNA fragments to the nanopore sensing volume considerably increases accuracy of the nucleotide sequence determination and that correlated displacement of ssDNA through the two nanopores may facilitate recognition of homopolymer fragments.

A Nanoparticle-DNA Assembled Nanorobot Powered by Charge-Tunable Quad-Nanopore System

Molecular machines hold keys to performing intrinsic functions in living cells so that the organisms can work properly, and unveiling the mechanism of functional molecule machines as well as elucidating the dynamic process of interaction with their surrounding environment is an attractive pharmaceutical target for human health. Due to the limitations of searching and exploring all possible motors in human bodies, designing and constructing functional nanorobots is vital for meeting the fast-rising demand of revealing life science and related diagnostics. Here, we theoretically designed a nanoparticle-DNA assembled nanorobot that can move along a solid-state membrane surface. The nanorobot is composed of a nanoparticle and four single-stranded DNAs. Our molecular dynamics simulations show that electroosmosis could be the main power driving the movement of a nanorobot. After the DNA strands were one-to-one captured by the nanopores in the membrane, by tuning the surface charge density of each nanopore, we have theoretically shown that the electroosmosis coupled with electrophoresis can be used to drive the movement of the nanorobot in desired directions along the graphene membrane surface. It is believed that the well-controlled nanorobot will lead to many exciting applications, such as cargo delivery, nanomanipulation, and so on, if it is implemented in the near future.

Microscopic Detection Analysis of Single Molecules in MoS2 Membrane Nanopores

A systematic microscopic analysis of the various resistive effects involved in the electronic detection of single biomolecules in a nanopore of a MoS₂ nanoribbon is presented. The variations of the transverse electronic current along the two-dimensional (2D) membrane due to the translocation of DNA and protein molecules through the pore are obtained by model calculations based on molecular dynamics (MD) and Boltzmann transport formalism, which achieved good agreement with the experimental data. Our analysis points to a self-consistent interaction among ions, charge carriers around the pore rim, and biomolecules. It provides a comprehensive understanding of the effects of the electrolyte concentration, pore size, nanoribbon geometry, and also the doping polarity of the nanoribbon on the electrical sensitivity of the nanopore in detecting biomolecules. These results can be utilized for fine-tuning the design parameters in the fabrication of highly sensitive 2D nanopore biosensors.

Spontaneous Translocation of Single-Stranded DNA in Graphene-MoS2 Heterostructure Nanopores: Shape Effect

The appropriate translocation speed of a single-stranded DNA (ssDNA) through a solid-state nanopore is crucial for DNA sequencing technologies. By studying the geometry effect of graphene-MoS₂ hetero-nanopores with molecular dynamics simulations, we have found that the shape of these nanopores (circular, square, or triangular, with similar size) may have a significant effect on the spontaneous translocation of ssDNA, with the triangular nanopore showing the slowest translocation and the circular one the fastest. Further analyses reveal that such differences in the spontaneous ssDNA translocation arise from different electrostatic attractions between the positively charged Mo atoms exposed in the pore and the negatively charged phosphate groups (PO₄^-) in nucleotides; the "sharpness" and the total number of the exposed Mo atoms of the nanopores are responsible for different electrostatic attractions between ssDNA and the nanopore. Our findings suggest that graphene-MoS₂ heterostructure nanopores with lower symmetries (i.e., having sharper corners) are capable of slowing down the ssDNA translocation, which might help better facilitate the nucleotide sensing and DNA sequencing. The conclusion from these findings might also extend to other solid-state nanopores in designing appropriate shapes for better controlling of the translocation speed.

Facile Size-Selective Defect Sealing in Large-Area Atomically Thin Graphene Membranes for Sub-Nanometer Scale Separations

Atomically thin graphene with a high-density of precise subnanometer pores represents the ideal membrane for ionic and molecular separations. However, a single large-nanopore can severely compromise membrane performance and differential etching between pre-existing defects/grain boundaries in graphene and pristine regions presents fundamental limitations. Here, we show for the first time that size-selective interfacial polymerization after high-density nanopore formation in graphene not only seals larger defects (>0.5 nm) and macroscopic tears but also successfully preserves the smaller subnanometer pores. Low-temperature growth followed by mild UV/ozone oxidation allows for facile and scalable formation of high-density (4-5.5 × 10¹² cm^-2) useful subnanometer pores in the graphene lattice. We demonstrate scalable synthesis of fully functional centimeter-scale nanoporous atomically thin membranes (NATMs) with water (∼0.28 nm) permeance ∼23× higher than commercially available membranes and excellent rejection to salt ions (∼0.66 nm, >97% rejection) as well as small organic molecules (∼0.7-1.5 nm, ∼100% rejection) under forward osmosis.

Crucial Role of Out-of-Pore Resistance on Temporal Response of Ionic Current in Nanopore Sensors

We investigated the temporal resolution of ionic current in solid-state nanopore sensors. Resistive pulses observed upon translocation of single-nanoparticles were found to become blunter as we imposed larger external resistance in series to the pore via the integrated microfluidic channels on the membrane. This was found to occur even when the out-of-pore resistance is more than an order of magnitude smaller than that at the nanopore, which can be understood as a predominant contribution of charging/discharging at the water-touching thin dielectrics to retard the response of the ionic current against ion blockage by a fast-moving object through the sensing zone. Most importantly, our results predict a time resolution of better than 12 ns, irrespective of the nanopore size, by optimizing the membrane capacitance and the external resistance that promises high-speed single-molecule sequencing by the ionic current at 10⁶ base/s.

Molecular Transport across the Ionic Liquid-Aqueous Electrolyte Interface in a MoS2 Nanopore

Nanopore sequencing of DNA has been enabled by the use of a biological enzyme to thread DNA through an engineered biological nanopore while recording the ionic current flowing through the nanopore. Efforts to realize a similar concept using a solid-state nanopore have been met with several technical challenges, one of which is the high speed of DNA translocation and the other the low ionic current contrast among individual nucleotides. A promising avenue to addressing both problems is using an ionic liquid to slow DNA translocation and a tiny nanopore in the MoS₂ membrane to distinguish individual nucleotides. The physical mechanisms enabling these technical advances have remained elusive. Here, we characterize the ion and DNA transport through the ionic liquid/aqueous electrolyte interface, with and without a MoS₂ nanopore, using the all-atom molecular dynamics method. We find that the partial miscibility of the ionic liquid and the aqueous electrolyte considerably alters the physics of the nanopore translocation process. Thus, the interface of the two phases generates a contact potential of 600 mV, the ionic current is dominated by the motion of ionic liquid molecules through the aqueous solution phase, and the DNA nucleotides exhibit preferential partitioning into the aqueous electrolyte, which leads to spontaneous transport of DNA polymers from the ionic liquid to the aqueous solution compartment in the absence of external voltage bias. The complex physics of the two-phase nanopore system offers a multitude of opportunities for extending the functionality of nanopore-sensing platforms.

Ion Concentration Effect on Nanoscale Electrospray Modes

The phenomena and mechanism of electrospray modes in nanoscale are investigated from experiments and molecular dynamics simulations. It is found that the ionic concentration plays a crucial role in determining the dripping or the jetting modes in a nanoscale electrospray system. Molecular dynamics simulations uncover that the two modes are caused by the competition between the electric field stress and surface tension, which is similar to the mechanism in a macroscale electrospray system. However, in a nanoscale electrospray system, the two competing forces of the electric field stress and surface tension are more sensitive to the ion distributions than that in a macroscale electrospray system, in which the applied voltage and pressure dominate. With the decrease of the nozzle diameter to nanoscale, the ions not only affect the local electric field stress, but also destroy the hydrogen bonds among water molecules, which lead to that the ion concentration becomes a dominant factor in determining the electrospray modes in nanoscale. The discovery provides a novel method to control nanoscale electrospray modes, which may find potential applications for mass spectrometry, film deposition, and electrohydrodynamic printing.

Computational investigation of geometrical effects in 2D boron nitride nanopores for DNA detection

Nanopore-based DNA detection and analysis have been intensively pursued theoretically and experimentally over the past decade. Owing to their nanometer thickness, 2D nanopores, such as boron nitride nanopores, show great potential for achieving DNA detection at base resolution. Although 2D nanopore devices hold great promise for next-generation DNA detection, efficiently and reliably detecting different DNA sequences is still a challenging problem. To date, most of the investigated nanopores adopt circular shapes. Because of the successful fabrication of triangular nanopores, investigating the shape effect of nanopores for DNA detection has become more and more important. In this study, boron nitride nanopores with circular, hexagonal, quadrangular and triangular shapes were modeled at various sizes. The translocation of homogeneous dsDNA through these nanopores was investigated by all-atom molecular dynamic simulations. The ionic conductivity of these nanopores was characterized and formulas for the total resistance based on the pore and access resistance were derived. The ionic current, dwell time and conductance blockade of homogeneous dsDNA were compared for nanopores with different shapes. We demonstrate that the charge distribution at the pore mouth plays an important role in the transportation of ions and DNA molecules. Our findings may shed light on the design of 2D nanopores and can facilitate the development of fast, low-cost and reliable nanopore-based DNA detection.

Fabrication of Si Micropore and Graphene Nanohole Structures by Focused Ion Beam

A biosensor formed by a combination of silicon (Si) micropore and graphene nanohole technology is expected to act as a promising device structure to interrogate single molecule biopolymers, such as deoxyribonucleic acid (DNA). This paper reports a novel technique of using a focused ion beam (FIB) as a tool for direct fabrication of both conical-shaped micropore in Si₃N₄/Si and a nanohole in graphene to act as a fluidic channel and sensing membrane, respectively. The thinning of thick Si substrate down to 50 µm has been performed prior to a multi-step milling of the conical-shaped micropore with final pore size of 3 µm. A transfer of graphene onto the fabricated conical-shaped micropore with little or no defect was successfully achieved using a newly developed all-dry transfer method. A circular shape graphene nanohole with diameter of about 30 nm was successfully obtained at beam exposure time of 0.1 s. This study opens a breakthrough in fabricating an integrated graphene nanohole and conical-shaped Si micropore structure for biosensor applications.

Plasmonic Nanopores for Single-Molecule Detection and Manipulation: Toward Sequencing Applications

Solid-state nanopore-based sensors are promising platforms for next-generation sequencing technologies, featuring label-free single-molecule sensitivity, rapid detection, and low-cost manufacturing. In recent years, solid-state nanopores have been explored due to their miscellaneous fabrication methods and their use in a wide range of sensing applications. Here, we highlight a novel family of solid-state nanopores which have recently appeared, namely plasmonic nanopores. The use of plasmonic nanopores to engineer electromagnetic fields around a nanopore sensor allows for enhanced optical spectroscopies, local control over temperature, thermophoresis of molecules and ions to/from the sensor, and trapping of entities. This Mini Review offers a comprehensive understanding of the current state-of-the-art plasmonic nanopores for single-molecule detection and biomolecular sequencing applications and discusses the latest advances and future perspectives on plasmonic nanopore-based technologies.

Rectification of protein translocation in truncated pyramidal nanopores

Solid-state nanopore technology presents an emerging single-molecule-based analytical tool for the separation and analysis of nanoparticles. Different approaches have been pursued to attain the anticipated detection performance. Here, we report the rectification behaviour of protein translocation through silicon-based truncated pyramidal nanopores. When the size of translocating proteins is comparable to the smallest physical constriction of the nanopore, the frequency of translocation events observed is lower for proteins that travel from the larger to the small opening of the nanopore than for those that travel in the reverse direction. When the proteins are appreciably smaller than the nanopore, an opposite rectification in the frequency of translocation events is evident. The maximum rectification factor achieved is around ten. Numerical simulations reveal the formation of an electro-osmotic vortex in such asymmetric nanopores. The vortex-protein interaction is found to play a decisive role in rectifying the translocation in terms of polarity and amplitude. The reported phenomenon can be potentially exploitable for the discrimination of various nanoparticles.