Cyclodextrin-functionalized Fe3O4@TiO2: reusable, magnetic nanoparticles for photocatalytic degradation of endocrine-disrupting chemicals in water supplies

Insight into mechanism of excellent visible-light photocatalytic activity of CuO/MgO/ZnO nanocomposite for advanced solution of environmental remediation

Environmental remediation has sought several innovative ways for the treatment of wastewater and captivated researchers around the globe towards it. Through this study, we aim to proceed with the efforts to foster sustainable and feasible ways for the treatment of wastewater. In this work, we report the sol-gel synthesis of CuO/MgO/ZnO nanocomposite and carry out their systematic characterization with the help of state-of-the-art analytical techniques, such as FTIR, SEM, TEM, PL, XRD, Raman, and AFM. The SEM along with TEM and AFM provided useful insights into the surface morphology of the synthesized nanocomposite on both 2D and 3D surfaces and concluded the well-dispersed behavior of the nanocomposite. The characteristic functional groups responsible for carrying out the reaction of Cu-O, Mg-O, and Zn-O were identified by FTIR spectroscopy. On the other hand, crystal size, dislocation density, and microstrain of the nanocomposite were calculated by XRD. For optical studies, photoluminescence spectroscopy was performed. Once the characterization of the nanocomposite was done, they were eventually treated against the toxic organic dye, methylene blue. The calculated rate constant values of k for CuO was 2.48 × 10-3 min-1, for CuO/MgO (2.04 × 10-3 min-1), for CuO/ZnO (1.82 × 10-3 min-1) and CuO/MgO/ZnO was found to be 2.00 × 10-3 min-1. It has become increasingly evident that nanotechnology can be used in various facets of modern life, and its implementation in wastewater treatment has recently received much attention.

Carboxymethyl β-Cyclodextrin Assistance for the 4-Nitrophenol Reduction Using Cobalt-Based Layered Double Hydroxides

Cobalt-aluminum-layered double hydroxides containing carboxymethyl β-cyclodextrin (CMβCD) were synthesized by coprecipitation and evaluated as a cobalt source for the 4-nitrophenol reduction in an aqueous medium. Several physicochemical techniques (XRD, FTIR, TGA) indicated the intercalation of the anionic cyclodextrin without damages to the hydrotalcite-type structure. These lamellar cobalt-aluminum hybrid materials (CoAl_CMβCD) were evaluated in the 4-nitrophenol reduction and showed higher activities in comparison with the CMβCD-free standard material (CoAl_CO3). To rationalize these results, a set of experimental controls going from physical mixtures of CoAl_CO3 with different cyclodextrins to other cobalt-based materials were investigated, highlighting the beneficial effects of both the layered double hydroxide and CMβCD-based hybrid structures. CMβCD also showed a beneficial effect as an additive during the 4-nitrophenol reduction. CoAl_CO3, dispersed in a fresh CMβCD solution could be re-used for five successive cycles without the loss of activity.

Sulfate Radical-Based Degradation of Organic Pollutants: A Review on Application of Metal-Organic Frameworks as Catalysts

The degradation of organic pollutants present in domestic and industrial effluents is a matter of concern because of their high persistence and ecotoxicity. Recently, advanced oxidation processes (AOPs) are being emphasized for organic pollutant removal from effluents, as they have shown higher degradation efficiencies when compared to conventional activated sludge processes. Sulfate radical-based methods are some of the AOPs, mainly carried out using persulfate (PS) and peroxymonosulfate (PMS), which have gained attention due to the ease of sulfate radical generation and the effective degradation of organic molecules. PMS is gaining more popularity because of its high reactivity and ability to generate excess sulfate radicals. PMS has been the major focus; therefore, its mechanism has been explained, and limitations have been elaborated. The involvement of metal-organic frameworks for PMS/PS activation applied to organic pollutant removal and recent advances in the application of biochar and hydrogel-assisted metal-organic frameworks have been discussed.

Hybrid collagen-cellulose-Fe3O4@TiO2 magnetic bio-sponges derived from animal skin waste and Kenaf fibers for wastewater remediation

Water pollution from synthetic dyes and oil spills has a significant impact on the environment and living species. Here, we developed a low-cost, environmentally friendly and easily biodegradable magnetic hybrid bio-sponge nanocomposite from renewable resources such as collagen and cellulose (Kenaf fibre cellulose-collagen, KFCC). We loaded it with magnetic bimetallic Fe3O4@TiO2 (BFT) NPs to produce a photocatalyst material (KFCC-BFT) for the treatment of colored wastewater as well as a sorbent for oil-water separation. The characterization of the bimetallic BFT NPs by XRD, HRTEM and VSM showed the deposition of TiO2 particles onto the surface of Fe3O4 with lattice interlayers spacing of 0.24 and 0.33 nm for Fe3O4 and TiO2, respectively with ferromagnetic property. The UV-vis diffuse reflectance spectra result indicated that the band gap energy of bio-sponges decreases with the increase of the bimetallic moiety. The photocatalytic efficiency of the as-prepared magnetic hybrid bio-sponge in the degradation of crystal violet dye was up to 91.2% under visible light conditions and 86.6% under direct sunlight exposure. Furthermore, the magnetic hybrid bio-sponge was used to separate motor oil from water (> 99%) and had a high oil sorption capacity of 46.1 g/g. Investigation of the recyclability and reusability performance for 9 cycles revealed that the bio-sponge had a high sorption capacity for up to 5 cycles. Our results suggest that the bio-polymer-supported BFT hybrid nanocomposite is a cost-effective and easily biodegradable photocatalyst and has great potential for real-field environmental remediation applications.

A review of the occurrence, transformation, and removal technologies for the remediation of per- and polyfluoroalkyl substances (PFAS) from landfill leachate

Per- and polyfluoroalkyl substances (PFAS) are persistent organic pollutants (POPs) that pose significant environmental and human health risks. The presence of PFAS in landfill leachate is becoming an increasingly concerning issue. This article presents a comprehensive review of current knowledge and research gaps in monitoring and removing PFAS from landfill leachate. The focus is on evaluating the effectiveness and sustainability of existing removal technologies, and identifying areas where further research is needed. To achieve this goal, the paper examines the existing technologies for monitoring and treating PFAS in landfill leachate. The review emphasizes the importance of sample preparation techniques and quality assurance/quality control measures in ensuring accurate and reliable results. Then, this paper reviewed the existing technologies for removal and remediation of PFAS in landfill leachates, such as adsorption, membrane filtration, photocatalytic oxidation, electrocatalysis, biodegradation, and constructed wetlands. Additionally, the paper summarizes the factors that exhibit the performance of various treatment technologies: reaction time, experimental conditions, and removal rates. Furthermore, the paper evaluates the potential application of different remediation technologies (i.e., adsorption, membrane filtration, photocatalytic oxidation, electrocatalysis, biodegradation, and constructed wetlands, etc.) in treating landfill leachate containing PFAS and its precursors, such as fluorotelomeres like FTOH and FTSs. The review highlights the importance of considering economic, technical, and environmental factors when selecting control measures. Overall, this article aims to provide guidance for promoting environmental protection and sustainable development in the context of PFAS contamination in landfill leachate.

Phthalate esters: occurrence, toxicity, bioremediation, and advanced oxidation processes

Phthalic acid esters are emerging pollutants, commonly used as plasticizers that are categorized as hazardous endocrine-disrupting chemicals (EDCs). A rise in anthropogenic activities leads to an increase in phthalate concentration in the environment which leads to various adverse environmental effects and health issues in humans and other aquatic organisms. This paper gives an overview of the research related to phthalate ester contamination and degradation methods by conducting a bibliometric analysis with VOS Viewer. Ecotoxicity analysis requires an understanding of the current status of phthalate pollution, health impacts, exposure routes, and their sources. This review covers five toxic phthalates, occurrences in the aquatic environment, toxicity studies, biodegradation studies, and degradation pathways. It highlights the various advanced oxidation processes like photocatalysis, Fenton processes, ozonation, sonolysis, and modified AOPs used for phthalate removal from the environment.

Magnetic covalent organic frameworks for rapid solid-phase extraction of phthalate esters and bisphenol A in beverage samples

Phthalate esters (PAEs) and bisphenol A (BPA) are endocrine-disrupting chemicals (EDCs), which are widely used in the production of food plastic packaging and easily migrate to food. Continuous exposure to EDCs may cause harm to human health. Herein, magnetic covalent organic framework TFP-NDA/Fe₃O₄ was synthesized by magnetizing covalent organic framework TFP-NDA through a facile coprecipitation method, and used as an adsorbent for rapid solid-phase extraction of PAEs (diethyl phthalate (DEP), diisobutyl phthalate (DIBP) and dibutyl phthalate (DBP)) and BPA. The extraction equilibrium can be reached within 12 min. By combination with a gas chromatography-flame ionization detector, the limits of detection were 0.7-2.3 μg L^-1 and the linear ranges were 10-500 μg L^-1 for diethyl phthalate (DEP) and 10-1000 μg L^-1 for diisobutyl phthalate (DIBP), dibutyl phthalate (DBP) and BPA with R² > 0.9916. In beverage samples (plastic bottled drinking water, juice and carbonated drink), the developed method was successfully applied to extract and quantify PAEs and BPA with recoveries ranging from 81.7% to 114.2%.

Photodegradation of Amido Black 10b Dye Under Visible Light Using Ni and Zn Ferrite Catalysts Prepared by a Simple Modified Sol–Gel Method

The pure α-Fe2O3, NiFe2O4, and ZnFe2O4 were prepared by a simple modified sol–gel method. The prepared catalysts were characterized by X-ray diffraction, transmission electron microscope, surface area, Zeta potential and optical techniques. The ferrite structure of samples is confirmed. The photocatalytic activity was evaluated toward Amido black 10b dye degradation under visible light at different pHs of 4, 8, and 10 for 90 min irradiation time. The photodegradation toward Amido black b10 dye reached maximum value at pH 8, and it reaches 92%, 89%, and 85% over ZnFe2O4, Fe2O3, and NiFe2O4 photocatalysts; respectively. The increased photoactivity of the ZnFe2O4 sample can also be attributed to its lower bandgap of 2 eV, the formation of the −OH-surface group. Since –OH can interact with the photoexcited holes that were originally formed on the catalyst surface, hydroxyl radicals are produced that have strong oxidizing properties. Whereas; the dye photodegradation is negligible in the case of Fe2O3, and NiFe2O4 catalysts at pH 10, due to the electrostatic repulsion between negatively charged catalyst surface and dye ions at high basic medium. While, in case of ZnFe2O4, the photodegradation reached only 40%.

Fabrication, characterization, and performance evaluation of Bi2WO6/TiO2/Fe3O4 photocatalyst responding to visible light for enhancing bisphenol A degradation

A novel magnetic Bi₂WO₆/TiO₂/Fe₃O₄ photocatalyst was synthesized by a hydrothermal approach. The pattern, structure, elemental composition, light-absorbing properties, and magnetism of Bi₂WO₆/TiO₂/Fe₃O₄ were characterized and analyzed. The performance, influencing factors, and mechanism of Bi₂WO₆/TiO₂/Fe₃O₄ towards bisphenol A (BPA) degradation were investigated and deduced. BPA removal up to 95% was achieved with the addition of 1.25 g/L Bi/Ti/Fe2 (molar ratio of Bi₂WO₆:TiO₂:Fe₃O₄ = 2:1:0.17) in the solution containing 10 mg/L BPA at pH 5.6. The performance of Bi/Ti/Fe2 was stable for five cycles at least after extracted from the reacted solution by magnet. Photoexcited h⁺, •OH, and •O₂^- formed in the reaction mainly contributed to BPA degradation. The Bi/Ti/Fe2 composite was composed of a three-layer petal structure from outside to inside to be Bi₂WO₆, TiO₂, and Fe₃O₄. This structure was conducive in forming a heterojunction between TiO₂ and Bi₂WO₆, inhibiting the merging of photoexcited e^- and h⁺, and improving the photocatalytic efficiency.

Photoremoval of Bisphenol A Using Hierarchical Zeolites and Diatom Biosilica

Bisphenol A (4,4-isopropylidenediphenol, BPA) is an organic compound widely used, e.g., in the production of epoxy resins, plastics, and thermal receipt papers. Unfortunately, bisphenol A has negative effects on human health, which has prompted the search for an effective method of its removal. One of the most promising methods of its elimination is photocatalytic removal. The aim of this study was to design an effective method for the photocatalytic removal of bisphenol A using, for the first time, hierarchical zeolites and ruthenium ion-modified diatom biosilica, and silver as photocatalysts and optimization of the reaction conditions: temperature, pH, and composition of the reaction mixture as well as the electromagnetic wavelength. Additionally, for the first time, the electromagnetic wavelength that would be most suitable for the study was selected. All materials used were initially characterized by XRD and low-temperature nitrogen adsorption/desorption isotherms. Ruthenium ion-modified biosilica proved to be the most effective catalyst for bisphenol A removal, which occurred at a rate higher than 99%.

Construction lamellar BaFe12O19/Bi3.64Mo0.36O6.55 photocatalyst for enhanced photocatalytic activity via a photo-Fenton-like Mo6+/Mo4+redox cycle

The novel BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 composite materials were constructed as magnetically recyclable photo-Fenton-like degradation systems. The composite catalyst not only promoted the effective transfer of photo-generated electrons and improved the Mo⁶⁺/Mo⁴⁺ cycle consequent, but also activated hydrogen peroxide to generate oxidizing free radicals. BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55-0.25 exhibited an outstanding degradation performance for tetracycline hydrochloride it is 1.3 times to Bi_3.64Mo_0.36O_6.55. The thermal catalytic performance of the Bi_3.64Mo_0.36O_6.55 monomer is similar to that of the BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 material without light. However, the removal rate of BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 material reaches 84.5% after 60 min with light, far exceeding that of Bi_3.64Mo_0.36O_6.55 material. By way of the contrast experiment with light and without light, it is further demonstrated that interfacial interaction between BaFe₁₂O₁₉ and Bi_3.64Mo_0.36O_6.55 acted a key role in the photocatalytic reaction system. It is also a good advantage that pollutants can be efficiently degraded without adjusting the pH. The characterization of photocurrent and X-ray photoelectron spectroscopy (XPS) also further proved the synergy between the two materials, which is useful to the separation of electrons and holes. The synergy ultimately improves the degradation performance. Besides, BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 can be easily separated by an external magnetic field after the photocatalytic activity reaction owing to BaFe₁₂O₁₉'s magnetic properties. It provides a new research idea for the construction and iron-based heterogeneous Fenton-like system for magnetic degradation of antibiotics.

Insights into the Titania (TiO2) Photocatalysis on the Removal of Phthalic Acid Esters (PAEs) in Water

In this era of globalization, plastic is regarded as one of the most versatile innovations, finding its uses ranging from packaging, automotive, agriculture, and construction to the medical and pharmaceutical industries. Unfortunately, the single-use nature of plastics leads to ecological and environmental problems. Among conventional disposal management of plastic waste are landfilling dumping, incineration, and recycling. However, not all plastic waste goes into disposal management and ends up accumulating in lakes, rivers, and seas. In the aquatic environment, the action of photochemical weathering plastics has resulted in the release of chemical additives such as phthalic acid esters (PAEs), an important plasticizer added to plastic products to improve their softness, flexibility, and durability. Nowadays, PAEs have been ubiquitously detected in our environment and numerous organisms are exposed to PAEs to some extent. As PAEs carry endocrine disruptive and carcinogenicity properties, an urgent search for the development of an efficient and effective method to remove PAEs from the environment is needed. As a viable option, titania (TiO2) photocatalysis is a promising tool to combat the PAEs contamination in our environment owing to its high photocatalytic activity, cost-effectiveness, and its ability to totally mineralize PAEs into carbon dioxide and water. Hence, this paper aims to highlight the concerning issue of the contamination of PAEs in our aquatic environments and the summary of the removal of PAEs by TiO2 photocatalysis. This review concerning the significance of knowledge on environmental PAEs would hopefully spark huge interest and future development to tackle this plastic-associated pollutant. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

UV-irradiating synthesis of cyclodextrin–silver nanocluster decorated TiO2 nanoparticles for photocatalytic enhanced anticancer effect on HeLa cancer cells

Titanium dioxide (TiO₂) has emerged as a viable choice for several biological and environmental applications because of its high efficiency, cheap cost, and high photostability. In pursuit of this purpose, the research of its many forms has been influenced by these unique aspects. The development of novel TiO₂-based hybrid materials with enhanced photocatalytically induced anticancer activity has gained tremendous attention. Here, we have developed a novel photocatalytic material (TiO₂–Ag NPs@-CD) by decorating ultrasmall silver nanoparticles (Ag NPs) with per-6-thio-β-cyclodextrin (SH-β-CD) on TiO₂ NPs. TiO₂–Ag NPs@-CD were characterized by employing various characterization techniques and evaluated for their anticancer activity against HeLa cancer cells using an MTT assay. The biocompatibility of the designed nanoparticles was determined on two normal cell lines, namely, 3T3 and human mesenchymal stem cells (hMSCs). The results show that the TiO₂–Ag NPs@-CD induced superior cytotoxic effects on HeLa cancer cells at a concentration of 64 μg/ml. Live-dead staining and oxidative stress investigations demonstrated that cell membrane disintegration and ROS-induced oxidative stress generated by TiO₂-Ag NPs@-CD inside HeLa cancer cells are the contributing factors to their exceptional anti-cancer performance. Moreover, TiO₂-Ag NPs@-CD exhibited good biocompatibility with 3T3 and hMSCs. These results indicated that the combination of all three components—a silver core, SH-β-CD ligands, and TiO₂ nanoparticles—produced a synergistic anticancer effect. Hence, the TiO₂-Ag NPs@-CD is a promising material that can be employed for different biological applications.

Ferritin: A Promising Nanoreactor and Nanocarrier for Bionanotechnology

The essence of bionanotechnology lies in the application of nanotechnology/nanomaterials to solve the biological problems. Quantum dots and nanoparticles hold potential biomedical applications, but their inherent problems such as low solubility and associated toxicity due to their interactions at nonspecific target sites is a major concern. The self-assembled, thermostable, ferritin protein nanocages possessing natural iron scavenging ability have emerged as a potential solution to all the above-mentioned problems by acting as nanoreactor and nanocarrier. Ferritins, the cellular iron repositories, are hollow, spherical, symmetric multimeric protein nanocages, which sequester the excess of free Fe(II) and synthesize iron biominerals (Fe₂O₃·H₂O) inside their ∼5-8 nm central cavity. The electrostatics and dynamics of the pore residues not only drives the natural substrate Fe²⁺ inside ferritin nanocages but also uptakes a set of other metals ions/counterions during in vitro synthesis of nanomaterial. The current review aims to report the recent developments/understanding on ferritin structure (self-assembly, surface/pores electrostatics, metal ion binding sites) and chemistry occurring inside these supramolecular protein cages (protein mediated metal ion uptake and mineralization/nanoparticle formation) along with its surface modification to exploit them for various nanobiotechnological applications. Furthermore, a better understanding of ferritin self-assembly would be highly useful for optimizing the incorporation of nanomaterials via the disassembly/reassembly approach. Several studies have reported the successful engineering of these ferritin protein nanocages in order to utilize them as potential nanoreactor for synthesizing/incorporating nanoparticles and as nanocarrier for delivering imaging agents/drugs at cell specific target sites. Therefore, the combination of nanoscience (nanomaterials) and bioscience (ferritin protein) projects several benefits for various applications ranging from electronics to medicine.

Simultaneous reduction and sequestration of hexavalent chromium by magnetic β-Cyclodextrin stabilized Fe3S4

In this study, β-Cyclodextrin (CD) modified Fe₃S₄ nanomaterials were synthesized by a one-step facile strategy and investigated for the removal of Cr(VI). The resulted CD-Fe₃S₄ exhibited enhanced removal efficiency toward Cr(VI) than bared Fe₃S₄ with a maximum capacity of 220.26 mg·g^-1 as the molar ratio of CD-to-Fe₃S₄ at 0.2. The effective performance of CD-Fe₃S₄ toward Cr(VI) could well maintain under oxic conditions and a wide pH range of aqueous solution. A high selectivity for Cr(VI) was achieved in the presence of coexisting cations and anions. More significantly, a single treatment step of CD-Fe₃S₄ effectively removed chromium from actual electroplating wastewater to the detection limit of 0.004 mg·L^-1 that far below the WHO limitation of Cr (VI) (<0.05 mg·L^-1) combing with the rapid magnetic separation without adjusting the pH value of wastewater at 7. The effective removal of Cr (VI) by CD-Fe₃S₄ involved a complex process of surface adsorption/reduction, and solution homogenous reduction and subsequent sequestration of Cr(III) achieving the effective removal of aqueous total Cr. The superior Cr (VI) removal capability and facial separation of CD-Fe₃S₄ attained its prominent potential application as an effective material for the Cr(VI) removal.

Current Developments in the Effective Removal of Environmental Pollutants through Photocatalytic Degradation Using Nanomaterials

Photocatalysis plays a prominent role in the protection of the environment from recalcitrant pollutants by reducing hazardous wastes. Among the different methods of choice, photocatalysis mediated through nanomaterials is the most widely used and economical method for removing pollutants from wastewater. Recently, worldwide researchers focused their research on eco-friendly and sustainable environmental aspects. Wastewater contamination is one of the major threats coming from industrial processes, compared to other environmental issues. Much research is concerned with the advanced development of technology for treating wastewater discharged from various industries. Water treatment using photocatalysis is prominent because of its degradation capacity to convert pollutants into non-toxic biodegradable products. Photocatalysts are cheap, and are now emerging slowly in the research field. This review paper elaborates in detail on the metal oxides used as a nano photocatalysts in the various type of pollutant degradation. The progress of research into metal oxide nanoparticles, and their application as photocatalysts in organic pollutant degradation, were highlighted. As a final consideration, the challenges and future perspectives of photocatalysts were analyzed. The application of nano-based materials can be a new horizon in the use of photocatalysts in the near future for organic pollutant degradation.

A Review of the Techno-Economic Feasibility of Nanoparticle Application for Wastewater Treatment

The increase in heavy metal contamination has led to an increase in studies investigating alternative sustainable ways to treat heavy metals. Nanotechnology has been shown to be an environmentally friendly technology for treating heavy metals and other contaminants from contaminated water. However, this technology is not widely used in wastewater treatment plants (WWTPs) due to high operational costs. The increasing interest in reducing costs by applying nanotechnology in wastewater treatment has resulted in an increase in studies investigating sustainable ways of producing nanoparticles. Certain researchers have suggested that sustainable and cheap raw materials must be used for the production of cheaper nanoparticles. This has led to an increase in studies investigating the production of nanoparticles from plant materials. Additionally, production of nanoparticles through biological methods has also been recognized as a promising, cost-effective method of producing nanoparticles. Some studies have shown that the recycling of nanoparticles can potentially reduce the costs of using freshly produced nanoparticles. This review evaluates the economic impact of these new developments on nanotechnology in wastewater treatment. An in-depth market assessment of nanoparticle application and the economic feasibility of nanoparticle applications in WWTPs is presented. Moreover, the challenges and opportunities of using nanoparticles for heavy metal removal are also discussed.

Phthalates removal from wastewater by different methods - a review

Phthalate esters are commonly used as plasticizers to improve the durability and workability of polymeric materials, locating and identifying them in various contexts has become a major challenge. Because of their ubiquitous use in plastic packaging and personal care items, as well as their tendency to leach out of these materials, phthalates have been detected in a variety of aquatic situations, including surface water, groundwater, drinking water, and wastewater. Phthalate esters have been shown to affect reproductive health and physical growth by disrupting the endocrine system. As a result, developing energy-efficient and effective technologies to eliminate these harmful substances from the atmosphere has become more important and urgent. This paper examines the existing techniques for treating phthalates and degradation mechanisms, as well as knowledge gaps and future research directions. These technologies include adsorption, electrochemical, photocatalysis, membrane filtration and microbial degradation. Adsorption and photo catalysis are the most widely used techniques for phthalate removal, according to the literature survey papers.

Application of natural minerals in photocatalytic degradation of organic pollutants: A review

Photocatalysis is an effective, inexpensive and environmentally friendly technology for the decomposition of various aqueous organic pollutants and plays an increasingly critical role in the degradation of pollutants. Natural minerals are abundant natural resources on Earth and can be obtained directly from nature. Natural minerals are excellent photocatalyst carriers that are environmentally friendly, low in price, and will not cause secondary pollution to the environment. Natural minerals have the characteristics of a large specific surface area, providing more active centres, and adsorbing pollutants to concentrate catalysis. Natural minerals are also excellent photocatalysts, such as haematite and magnetite, which play a very good role in the degradation of water pollutants. Studies that make full use of natural minerals are of great significance. This review covers the latest research on natural minerals as photocatalytic composite materials to degrade organic pollutants in water, including three parts: the classification of natural minerals, the structural description of natural mineral composites, and the photocatalytic degradation of organic pollutants by natural mineral composites. In addition, the current limitations and opinions of natural mineral composites are discussed to achieve better results in applying natural minerals.

Magnetically separable ZnFe2O4/Ag3PO4/g-C3N4 photocatalyst for inactivation of Microcystis aeruginosa: Characterization, performance and mechanism

Water eutrophication leads to increasingly serious harmful algal blooms (HABs), which poses tremendous threats on aquatic environment and human health. In this work, a novel magnetically separable ZnFe₂O₄/Ag₃PO₄/g-C₃N₄ (ZFO/AP/CN) photocatalyst with double Z-scheme was constructed for Microcystis aeruginosa (M. aeruginosa) inactivation and Microcystin-LR (MC-LR) degradation under visible light. The photocatalyst was characterized by XRD, SEM, EDS, TEM, XPS, FTIR, UV-vis, PL, and VSM. Approximately 96.33% of chlorophyll a was degraded by ZFO/AP/CN (100 mg/L) after 3 h of visible light irradiation. During the photocatalytic process, the malondialdehyde (MDA) of M. aeruginosa increased, the activities of superoxide dismutase (SOD) and catalase (CAT) increased initially and decreased afterwards. Furthermore, the photocatalytic removal efficiency of M. aeruginosa (OD₆₈₀ ≈0.732) and MC-LR (0.2 mg/L) reached 94.31% and 76.92%, respectively, in the simultaneous removal of algae and algal toxin experiment. Reactive species scavenging experiments demonstrated that·O₂^- and·OH played key roles in inactivating M. aeruginosa and degrading MC-LR. The excellent recoverability and stability of ZFO/AP/CN were proved by cycling photocatalytic experiment which using magnetic recovery method. In summary, the synthesized magnetically separable ZFO/AP/CN photocatalyst has remarkable photocatalytic activity under visible light and shows promising potential for practical application of alleviating HABs.

Enhanced oil recovery using hyperbranched polyglycerol polymer-coated silica nanoparticles

Functionalized Fe₃O₄-SiO₂ magnetic nanoparticles (Fe-Si-MNPs) coated with hyperbranched polyglycerol polymer were prepared and tested for oil recovery from oil in water (O/W) emulsions. The structure, chemistry, and surface modifications of the newly developed demulsifier (PSiMNPs) were analyzed, and the percentage demulsification efficiency (%η_dem) was tested at differing concentrations of surfactant (C_sur), oil (C_oil), and demulsifier (D_PSiMNPs). The developed PSiMNPs can be separated from the solution by a magnetic field, regenerated using ethanol, and reused several times. The reported %η_dem was ≥80% for all the studied C_oil. The %η_dem improved as the C_sur and pH decreased, with maximum values of 98.8% and 98.5% achieved at C_sur = 0.05 g/L and a pH = 4, respectively. A D_PSiMNPs = 100 mg/L was sufficient to achieve %η_dem of 99.4% for C_oil = 100 mg/L and slightly decreased to ~93% for C_oil ~4000 mg/L. The PSiMNPs can be reused up to 15 times with a steady %η_dem of 89.1% for C_oil = 100 mg/L and 88.6% for C_oil = 4000 mg/L. The adsorption of oil on the PSiMNPs follows Freundlich isotherm with maximum adsorption capacity (q_max) of 192.8 g/mg and Langmuir constant (b) of 28.06 mg/L for C_oil = 900 mg/L. The q_max of the recycled PSiMNPs slightly decreased to 189.08 g/mg. The kinetic of oil recovery follows the PSO with a K₂ of 0.0169 g/mg. min. Surface modification of Fe-Si-MNPs enhanced the oil adsorption, increased the adsorption capacity, and extended the service life resulting in a better cost and process feasibility.

Predicting kinetics of water-rich permeate flux through photocatalytic mesh under visible light illumination

Membrane-based separation technologies are attractive to remediating unconventional water sources, including brackish, industrial, and municipal wastewater, due to their versatility and relatively high energy efficiency. However, membrane fouling by dissolved or suspended organic substances remains a primary challenge which can result in an irreversible decline of the permeate flux. To overcome this, membranes have been incorporated with photocatalytic materials that can degrade these organic substances deposited on the surface upon light illumination. While such photocatalytic membranes have demonstrated that they can recover their inherent permeability, less information is known about the effect of photocatalysis on the kinetics of the permeate flux. In this work, a photocatalytic mesh that can selectively permeate water while repelling oil was fabricated by coating a mixture of nitrogen-doped TiO2 (N-TiO2) and perfluorosilane-grafted SiO2 (F-SiO2) nanoparticles on a stainless steel mesh. Utilizing the photocatalytic mesh, the time-dependent evolution of the water-rich permeate flux as a result of photocatalytic degradation of the oil was studied under the visible light illumination. A mathematical model was developed that can relate the photocatalytic degradation of the organic substances deposited on a mesh surface to the evolution of the permeate flux. This model was established by integrating the Langmuir-Hinshelwood kinetics for photocatalysis and the Cassie-Baxter wettability analysis on a chemically heterogeneous mesh surface into a permeate flux relation. Consequently, the time-dependent water-rich permeate flux values are compared with those predicted by using the model. It is found that the model can predict the evolution of the water-rich permeate flux with a goodness of fit of 0.92.

Remediation of Diethyl Phthalate in Aqueous Effluents with TiO2-Supported Rh0 Nanoparticles as Multicatalytic Materials

An innovative “domino” process, based on an arene hydrogenation followed by a photocatalytic step, was designed for the remediation of endocrine disrupting compounds, in highly concentrated aqueous effluents. The novelty relies on the use of TiO2-supported zerovalent Rh nanoparticles as multicatalytic materials (MCMs) for this two-step treatment, applied on diethyl phthalate, which is a model aromatic pollutant frequently present in aquatic environments. This nanocomposite advanced material, which was easily prepared by a green, wet impregnation methodology, proved to be active in the successive reactions, the reduction in the aromatic ring, and the photodegradation step. This sustainable approach offers promising alternatives in the case of photoresistive compounds.

High-Capacity Amidoxime-Functionalized β-Cyclodextrin/Graphene Aerogel for Selective Uranium Capture

Uranium extraction from seawater is a grand challenge of mounting severity as the energy demand increases with a growing global population. An amidoxime-functionalized carboxymethyl β-cyclodextrin/graphene aerogel (GDC) is developed for highly efficient and selective uranium extraction via a facile one-pot hydrothermal process. GDC reaches equilibrium in 1 h, and the maximum adsorption capacity calculated from Langmuir model is 654.2 mg/g. Benefiting from the chelation and complexation reaction, the obtained GDC has an excellent selectivity even when the competitive cations, anions, and oil pollutants exist. In addition, the aerogel possesses great mechanical integrity and remains intact after 10 compression cycles. Meanwhile, the GDC can be easily regenerated and maintains a high reusability of 87.3% after 10 adsorption-desorption cycles. It is worthwhile to mention that GDC exhibits an excellent extraction capacity of 19.7 mg/g within 21 days in natural seawater, which is greatly desired in uranium extraction from seawater.

ZnO nanorods/Fe3O4-graphene oxide/metal-organic framework nanocomposite: recyclable and robust photocatalyst for degradation of pharmaceutical pollutants

Nanosized semiconductors are widely utilized as solar energy based photocatalyst. However, the deficiencies such as poor adsorption toward contaminants and recyclability issues, rapid recombination of photo-introduced radicals, and deactivation by scavengers are still be the obstacle. To addressing those obstacles, zeolitic imidazolate framework-8 (ZIF-8), photosensitive ZnO, and paramagnetic Fe₃O₄ were anchored on conductive graphene oxide (GO) to prepare a nanocomposite photocatalyst ZnO/Fe₃O₄-GO/ZIF. The photocatalyst showed good robustness to scavengers of hydroxyl radicals (OH^•), superoxide radicals (O₂^•-), and hole (h⁺) with hydrophobic ZIF-8 modified surface. Finally, four pharmaceuticals (sulfamethazine, metronidazole, norfloxacin, and 4-acetaminophen) were degraded rapidly under simulated solar irradiation for 1 h, and the photocatalyst could be recycled at least ten times without obvious deactivation. The final results show that combination of semiconductor, graphene oxide and ZIF-8 is a good idea for construction of efficient photocatalyst. It offers new views in interface modification of nanomaterials, photocatalysis, and adsorption.

Cyclodextrins and inorganic nanoparticles: Another tale of synergy

In this review, we summarize the recent research focused on the combination of inorganic nanoparticles and α-, β- and γ- cyclodextrins. Our intention is to highlight the most relevant publications on the synthesis of nanoparticle-cyclodextrin (NP-CD) nanohybrids, with CDs acting as reducing agents or through the post-synthetic modification of inorganic nanoparticles with CDs. We also discuss the new or enhanced properties that arise from the host-guest capabilities of the CDs and inorganic nanoparticles. Finally, we illustrate the potential applications of these materials in numerous research fields.

Removal of phthalates from aqueous solution by semiconductor photocatalysis: A review

While phthalate esters are commonly used as plasticizers to improve the flexibility and workability of polymeric materials, their presence and detection in various environments has become a significant concern. Phthalate esters are known to have endocrine-disrupting effects, which affects reproductive health and physical development. As a result, there is now increased focus and urgency to develop effective and energy efficient technologies capable of removing these harmful compounds from the environment. This review explores the use of semiconductor photocatalysis as an efficient and promising solution towards achieving removal and degradation of phthalate esters. A comprehensive review of photocatalysts reported in the literature demonstrates the range of materials including commercial TiO₂, solar activated catalysts and composite materials capable of enhancing adsorption and degradation. The degradation pathways and kinetics are also considered to provide the reader with an insight into the photocatalytic mechanism of removal. In addition, through the use of two key platforms (the technology readiness level scale and electrical energy per order), the crucial parameters associated with advancing photocatalysis for phthalate ester removal are discussed. These include enhanced surface interaction, catalyst platform development, improved light delivery systems and overall system energy requirements with a view towards pilot scale and industrial deployment.

Methylene Blue Dye Photocatalytic Degradation over Synthesised Fe3O4/AC/TiO2 Nano-Catalyst: Degradation and Reusability Studies

In this study, activated carbon (AC) from coconut shell, as a widely available agricultural waste, was synthesised in a simple one-step procedure and used to produce a magnetic Fe3O4/AC/TiO2 nano-catalyst for the degradation of methylene blue (MB) dye under UV light. Scanning electron microscopy revealed that TiO2 nanoparticles, with an average particle size of 45 to 62 nm, covered the surface of the AC porous structure without a reunion of its structure, which according to the TGA results enhanced the stability of the photocatalyst at high temperatures. The photocatalytic activities of synthesised AC, commercial TiO2, Fe3O4/AC, and Fe3O4/AC/TiO2 were compared, with Fe3O4/AC/TiO2 (1:2) exhibiting the highest catalytic activity (98%). Furthermore, evaluation of the recovery and reusability of the photocatalysts after treatment revealed that seven treatment cycles were possible without a significant reduction in the removal efficiency.

Photocatalytic degradation of model pharmaceutical pollutant by novel magnetic TiO2@ZnFe2O4/Pd nanocomposite with enhanced photocatalytic activity and stability under solar light irradiation

In the last decades, the use of magnetic nanocomposites as a catalyst was considered for removal of organic pollutants due to its easy separation. Therefore, initially, TiO₂@ZnFe₂O₄/Pd nanocomposite was prepared and then used in the photodegradation of diclofenac under direct solar irradiation in the batch and continuous systems. The structure, morphology and other specifications of produced nanocatalyst were determined via XRD, VSM, FESEM/EDX, FTIR, GTA, UV-Vis, Zeta potential, XPS and ICP-OES. The effective factors on diclofenac removal via nanophotocatalyst viz. pH, catalyst concentration, initial concentration of diclofenac, and flow rate and column length on diclofenac photodegradation were studied. Based on the results, the optimal rate for pH, catalyst concentration, and initial concentration of diclofenac was 4, 0.03 g/l and 10 mg/l respectively. Pd-coated TiO₂@ZnFe₂O₄ magnetic photocatalyst had higher photocatalytic activity in diclofenac photodegradation in relation to ZnFe₂O₄ and TiO₂@ZnFe₂O₄ under solar light irradiation. The findings showed that after five recycles, the photocatalytic efficiency did not show much reduction i.e. the removal efficiency from 86.1% in the first cycle reduced only to 71.38% in the last cycle. Likewise, in this study, with flow rate reduction and column length increase diclofenac degradation rate increased.

Surface engineering of magnetic iron oxide nanoparticles by polymer grafting: synthesis progress and biomedical applications

Magnetic iron oxide nanoparticles (IONPs) have wide applications in magnetic resonance imaging (MRI), biomedicine, drug delivery, hyperthermia therapy, catalysis, magnetic separation, and others. However, these applications are usually limited by irreversible agglomeration of IONPs in aqueous media because of their dipole-dipole interactions, and their poor stability. A protecting polymeric shell provides IONPs with not only enhanced long-term stability, but also the functionality of polymer shells. Therefore, polymer-grafted IONPs have recently attracted much attention of scientists. In this tutorial review, we will present the current strategies for grafting polymers onto the surface of IONPs, basically including "grafting from" and "grafting to" methods. Available functional groups and chemical reactions, which could be employed to bind polymers onto the IONP surface, are comprehensively summarized. Moreover, the applications of polymer-grafted IONPs will be briefly discussed. Finally, future challenges and perspectives in the synthesis and application of polymer-grafted IONPs will also be discussed.

Preparation and surface engineering of CM-β-CD functionalized Fe3O4@TiO2 nanoparticles for photocatalytic degradation of polychlorinated biphenyls (PCBs) from transformer oil

The aim of the present research is to investigate the efficiency of surface-modified magnetic nanoparticles for photocatalytic degradation of PCBs from transformer oil. Therefore, CMCD-Fe₃O₄@TiO₂ was successfully produced via grafting of carboxymethyl-β-cyclodextrin (CM-β-CD) onto the core-shell titania magnetic nanoparticles surface. The photocatalytic efficiency of CMCD-Fe₃O₄@TiO₂ for degradation of PCBs was systematically evaluated using an experimental design and the process parameters were optimized by response surface methodology (RSM). The central composite design (CCD) with four experimental parameters was used successfully in the modeling and optimization of photocatalytic efficiency in removing PCBs from transformer oil. ANOVA analysis confirmed a high R-squared value of 0.9769 describing the goodness of fit of the proposed model for the significance estimation of the individual and the interaction effects of variables. The optimal degradation yields of PCBs was achieved 83 % at a temperature of 25 °C, time of 16 min, the dosage of the catalyst of 8.35 mg and oil: ethanol ratio of 1:5. These findings encourage the practical use of CM-β-CD-Fe₃O₄@TiO₂ as a promising and alternative photocatalyst on an industrial scale for the cleaning of organic pollutants such as PCBs due to its environmental friendliness, the benefit of magnetic separation and good reusability after five times.

Accelerated photoelectron transmission by carboxymethyl β-cyclodextrin for organic contaminants removal: An alternative to noble metal catalyst

Applications of noble metal decorated photocatalytic nanomaterials are restricted by its high cost. In this study, carboxymethyl β-cyclodextrin (CM-β-CD), as an alternative to gold nanoparticle, was used to modified titanium dioxide (CM-β-CD-P25) to accelerate photoelectron transmission and enhance the organic contaminants removal from water. Several of emerging organic contaminants, such as bisphenol A (BPA), phenol and sulphanilamide (SA), were used to evaluate their photocatalytic activities. Carboxymethyl-β-cyclodextrin not only provide hydrophobic sites to entrap organic contaminants but also provide a "bridge" for accelerated transmission of photogenerated charges without introducing the recombination interface. Consequently, 91.6 % of BPA, 71.9 % of phenol and 97.1 % of SA could be removed by CM-β-CD-P25(2:1) under 1 h UV light irradiation. The photooxidation rate constant of BPA, phenol and SA by CM-β-CD-P25(2:1) were 0.039 min^-1, 0.021 min^-1 and 0.062 min^-1, respectively, which are much higher than that of pristine P25 and Au-P25. Moreover, the photocatalytic activity of CM-β-CD-P25(2:1) remains almost unchanged in repeated cycle test owing to its high stability. The reasonable mechanism of CM-β-CD-P25 were investigated. CM-β-CD-P25 hybrid nanoparticles completely surpasses Au-P25 in organic contaminants removal, and shows great potential to replace noble metal as mediator.

Effective degradation of Di-n-butyl phthalate by reusable, magnetic Fe3O4 nanoparticle-immobilized Pseudomonas sp. W1 and its application in simulation

Di-n-butyl phthalate (DBP), one of the most widely used plasticizers, has been listed as a priority pollutant because of its toxicity to both humans and animals. In this study, Pseudomonas sp. W1, isolated from activated sludge, was capable of degrading 99.88% of DBP (1000 mg L^-1) within 8 days. We immobilized the W1 strain using Fe₃O₄ iron nanoparticles (IONPs) coated with poly-dopamine (PDA), and further evaluated its DBP degradation efficiency. The DBP degradation performance of W1 was improved by immobilization, exhibiting 99.69% of DBP degradation efficiency on the 6th day, which was 25.68% higher than un-immobilized W1. After three cycles of magnetic recycling and utilization, W1-PDA-IONPs retained 99.6% of their original efficiency. W1-PDA-IONPs were then used to degrade DBP in landfill leachate. When the proportion of raw leachate was ≤50%, DBP could be all degraded by W1-PDA-IONPs within 6 days. In 100% landfill leachate, DBP degradation efficiency after 10 days of incubation reached 66.40%. Furthermore, W1-PDA-IONPs cells in a simulated aeration system could be effectively magnetically separated at aeration rates from 60 to 600 mL min^-1. These results highlight the potential of W1-PDA-IONPs in the bioremediation of DBP-contaminated waste water.

Intimate coupling of photocatalysis and biodegradation for wastewater treatment: Mechanisms, recent advances and environmental applications

Due to the increase of emerging contaminants in water, how to use new treatment technology to make up for the defects of traditional wastewater treatment method has become one of the research hotspots at present. Intimate coupling of photocatalysis and biodegradation (ICPB) as a novel wastewater treatment method, which combines the advantages of biological treatment and photocatalytic reactions, has shown a great potential as a low-cost, environmental friendly and sustainable treatment technology. The system mainly consists of photocatalytic materials, porous carriers and biofilm. The key principle of ICPB is to transform bio-recalcitrant pollutants into biodegradable products by photocatalysis on the surface of porous carriers. The biodegradable products were mineralized simultaneously through the biofilm inside the carriers. Because of the protection of the carriers, the microorganism can remain active even under the UV-light, the mechanical force of water flow or the attack of free radicals. ICPB breaks the traditional concept that photocatalytic reaction and biodegradation must be separated in different reactors, improves the purification capacity of sewage and saves the cost. This review summarizes the recent advances of ICPB photocatalysts, carriers and biofilm being applied, and focuses on the mechanisms and reactor configurations which is particularly novel. Furthermore, the possible ongoing researches on ICPB are also put forward. This review will provide a valuable insight into the design and application of ICPB in environment and energy field.

Dual responsive magnetic Fe3O4-TiO2/graphene nanocomposite as an artificial nanozyme for the colorimetric detection and photodegradation of pesticide in an aqueous medium

The Fe₃O₄-TiO₂/reduced graphene oxide (Fe₃O₄-TiO₂/rGO) nanocomposite was successfully prepared by one step hydrothermal method and exhibit intrinsic peroxidase mimic activity and photocatalytic efficiency. The as-prepared nanomaterials were characterized by several analytical tools including XRD, HRTEM, FESEM, XPS, VSM, FT-IR, AFM, TGA and zeta potential analysis. The average particle size of Fe₃O₄ and TiO₂ NPs on the rGO nanosheets are found to be 9 ± 0.2 nm. The synthesized nanocomposite showed dual responsive including highly sensitive colorimetric detection of harmful atrazine pesticide in an aqueous medium as well as photocatalytic degradation of atrazine pesticide. The Fe₃O₄-TiO₂/rGO nanocomposite showed the efficient peroxidase-like catalytic activity throughout the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) as a peroxidase substrate to the blue-colored oxidized product (ox-TMB) in presence of H₂O₂. Based on this observation, the colorimetric detection technique is applied for the sensing of atrazine as model pesticides using TMB as a peroxidase substrate molecule and 2.98 μg/L of the limit of detection (LOD) was obtained in the linear range of 2-20 μg/L. Thus the proposed colorimetric sensing technique is simple and low cost for the real-time monitoring of the pesticides in an aqueous medium. Further, the Fe₃O₄-TiO₂/rGO nanocomposite was also successfully utilized towards efficient photocatalytic degradation of atrazine molecule (100 %) under irradiation of natural sunlight. Moreover, Fe₃O₄-TiO₂/rGO nanocomposite was successfully recycled for 10 times without a significant loss of its photocatalytic efficiency. This work delivers a new insight for the dual responsive of the Fe₃O₄-TiO₂/rGO nanocomposite as an artificial nanozyme for colorimetric sensing of the water pollutant and also removal of the water pollutant by simple photocatalytic degradation method under natural sunlight irradiation.

Magnetic Ti3C2Tx (Mxene) for diclofenac degradation via the ultraviolet/chlorine advanced oxidation process

In this study, a magnetic titanium carbide (Ti₃C₂T_x) MXene was synthesized through a one-step chemical co-precipitation method using ammonium bifluoride as a mild etchant and was investigated for photocatalytic degradation of diclofenac (DCF) via the ultraviolet (UV)/chlorine process. The DCF degradation was enhanced by the generation of active radicals such as the hydroxyl radical and reactive chlorine species compared with that resulting from UV and chlorination treatment alone as well as UV/H₂O₂ processes at pH 7. The first-order rate constant of the UV/chlorine process was 0.1025 min^-1, which is 12.7 and 6.8 times higher than those of the only UV and UV/H₂O₂ processes, respectively. Magnetic nanoparticles on the surfaces of Ti₃C₂T_x sheets not only enhanced the adsorption capacity of the synthesized composite but also increased the rate of electron transfer in solution. In addition, the effects of different operating conditions such as magnetic Ti₃C₂T_x dose, pH, and initial chlorine concentration on DCF degradation were investigated. Magnetic Ti₃C₂T_x showed high stability and photodegradation efficiency during seven consecutive degradation reaction cycles. The derivatives of DCF during the photocatalytic degradation process were also investigated based on the observed intermediate products and a degradation pathway was proposed. Thus the synthesized magnetic Ti₃C₂T_x is a simple and affordable photocatalyst, which can significantly enhance DCF degradation in the UV/chlorine advanced oxidation process.