Atomic-scale observation of lithiation reaction front in nanoscale SnO2 materials

Defect-Mediated Formation of Oriented Phase Domains in a Lithium-Ion Insertion Electrode

The performance and robustness of electrodes are closely related to transformation-induced nanoscale structural heterogeneity during (de)lithiation. As a result, it is critical to understand at atomic scale the origin of such structural heterogeneity and ultimately control the transformation microstructure, which remains a formidable task. Here, by performing in situ studies on a model intercalation electrode material, anatase TiO2, we reveal that defects─both preexisting and as-formed during lithiation─can mediate the local anisotropic volume expansion direction, resulting in the formation of multiple differently oriented phase domains and eventually a network structure within the lithiated matrix. Our results indicate that such a mechanism operated by defects, if properly harnessed, could not only improve lithium transport kinetics but also facilitate strain accommodation and mitigate chemomechanical degradation. These findings provide insights into the connection of defects to the robustness and rate performance of electrodes, which help guide the development of advanced lithium-ion batteries via defect engineering.

Insight into Reversible Conversion Reactions in SnO2 -Based Anodes for Lithium Storage: A Review

Various anode materials have been widely studied to pursue higher performance for next generation lithium ion batteries (LIBs). Metal oxides hold the promise for high energy density of LIBs through conversion reactions. Among these, tin dioxide (SnO₂ ) has been typically investigated after the reversible lithium storage of tin-based oxides is reported by Idota and co-workers in 1997. Numerous in/ex situ studies suggest that SnO₂ stores Li⁺ through a conversion reaction and an alloying reaction. The difficulty of reversible conversion between Li₂ O and SnO₂ is a great obstacle limiting the utilization of SnO₂ with high theoretical capacity of 1494 mA h g^-1 . Thus, enhancing the reversibility of the conversion reaction has become the research emphasis in recent years. Here, taking SnO₂ as a typical representative, the recent progress is summarized and insight into the reverse conversion reaction is elaborated. Promoting Li₂ O decomposition and maintaining high Sn/Li₂ O interface density are two effective approaches, which also provide implications for designing other metal oxide anodes. In addition, some in/ex situ characterizations focusing on the conversion reaction are emphatically introduced. This review, from the viewpoint of material design and advanced characterizations, aims to provide a comprehensive understanding and shed light on the development of reversible metal oxide electrodes.

Self-Assembly MXene-rGO/CoNi Film with Massive Continuous Heterointerfaces and Enhanced Magnetic Coupling for Superior Microwave Absorber

MXene, as a rising star of two-dimensional (2D) materials, has been widely applied in fields of microwave absorption and electromagnetic shielding to cope with the arrival of the 5G era. However, challenges arise due to the excessively high permittivity and the difficulty of surface modification of few-layered MXenes severely, which infect the microwave absorption performance. Herein, for the first time, a carefully designed and optimized electrostatic self-assembly strategy to fabricate magnetized MXene-rGO/CoNi film was reported. Inside the synthesized composite film, rGO nanosheets decorated with highly dispersed CoNi nanoparticles are interclacted into MXene layers, which effectively suppresses the originally self-restacked of MXene nanosheets, resulting in a reduction of high permittivity. In addition, owing to the strong magnetic coupling between the magnetic FeCo alloy nanoparticles on the rGO substrate, the entire MXene-rGO/CoNi film exhibits a strong magnetic loss capability. Moreover, the local dielectric polarized fields exist at the continuous hetero-interfaces between 2D MXene and rGO further improve the capacity of microwave loss. Hence, the synthesized composite film exhibits excellent microwave absorption property with a maximum reflection loss value of - 54.1 dB at 13.28 GHz. The electromagnetic synergy strategy is expected to guide future exploration of high-efficiency MXene-based microwave absorption materials.

Ultrafast Na Transport into Crystalline Sn via Dislocation-Pipe Diffusion

The charging process of secondary batteries is always associated with a large volume expansion of the alloying anodes, which in many cases, develops high compressive residual stresses near the propagating interface. This phenomenon causes a significant reduction in the rate performance of the anodes and is detrimental to the development of fast-charging batteries. However, for the Na-Sn battery system, the residual stresses that develop near the interface are not stored, but are relieved by the generation of high-density dislocations in crystalline Sn. Direct-contact diffusion experiments show that these dislocations facilitate the preferential transport of Na and accelerate the Na diffusion into crystalline Sn at ultrafast rates via "dislocation-pipe diffusion". Advanced analyses are performed to observe the evolution of atomic-scale structures while measuring the distribution and magnitude of residual stresses near the interface. In addition, multi-scale simulations that combined classical molecular dynamics and first-principles calculations are performed to explain the structural origins of the ultrafast diffusion rates observed in the Na-Sn system. These findings not only address the knowledge gaps regarding the relationship between pipe diffusion and the diffusivity of carrier ions but also provide guidelines for the appropriate selection of anode materials for use in fast-charging batteries.

3D Seed-Germination-Like MXene with In Situ Growing CNTs/Ni Heterojunction for Enhanced Microwave Absorption via Polarization and Magnetization

Benefiting from the possible "seed-germination" effect, the "seeds" Ni²⁺ grow into "buds" Ni nanoparticles and "stem" carbon nanotubes (CNTs) from the enlarged "soil" of MXene skeleton. Compared with the traditional magnetic agglomeration, the MXene-CNTs/Ni hybrids exhibit the highly spatial dispersed magnetic architecture. 3D MXene-CNTs/Ni composites hold excellent microwave absorption performance (-56.4 dB at only 2.4 mm). Ti₃C₂T_x MXene is widely regarded as a potential microwave absorber due to its dielectric multi-layered structure. However, missing magnetic loss capability of pure MXene leads to the unmatched electromagnetic parameters and unsatisfied impedance matching condition. Herein, with the inspiration from dielectric-magnetic synergy, this obstruction is solved by fabricating magnetic CNTs/Ni hetero-structure decorated MXene substrate via a facile in situ induced growth method. Ni²⁺ ions are successfully attached on the surface and interlamination of each MXene unit by intensive electrostatic adsorption. Benefiting from the possible "seed-germination" effect, the "seeds" Ni²⁺ grow into "buds" Ni nanoparticles and "stem" carbon nanotubes (CNTs) from the enlarged "soil" of MXene skeleton. Due to the improved impedance matching condition, the MXene-CNTs/Ni hybrid holds a superior microwave absorption performance of - 56.4 dB at only 2.4 mm thickness. Such a distinctive 3D architecture endows the hybrids: (i) a large-scale 3D magnetic coupling network in each dielectric unit that leading to the enhanced magnetic loss capability, (ii) a massive multi-heterojunction interface structure that resulting in the reinforced polarization loss capability, confirmed by the off-axis electron holography. These outstanding results provide novel ideas for developing magnetic MXene-based absorbers.

In Situ TEM Study on Conversion-Type Electrodes for Rechargeable Ion Batteries

Conversion-type materials have been considered as potentially high-energy-density alternatives to commercially dominant intercalation-based electrodes for rechargeable ion batteries and have attracted tremendous research effort to meet the performance for viable energy-storage technologies. In situ transmission electron microscopy (TEM) has been extensively employed to provide mechanistic insights into understanding the behavior of battery materials. Noticeably, a great portion of previous in situ TEM studies has been focused on conversion-type materials, but a dedicated review for this group of materials is missing in the literature. Herein, recent developments of in situ TEM techniques for investigation of dynamic phase transformation and associated structural, morphological, and chemical evolutions during conversion reactions with alkali ions in secondary batteries are comprehensively summarized. The materials of interest broadly cover metal oxides, chalcogenides, fluorides, phosphides, nitrides, and silicates with specific emphasis on spinel metal oxides and recently emerged 2D metal chalcogenides. Special focus is placed on the scientific findings that are uniquely obtained by in situ TEM to address fundamental questions and practical issues regarding phase transformation, structural evolution, electrochemical redox, reaction mechanism, kinetics, and degradation. Critical challenges and perspectives are discussed for advancing new knowledge that can bridge the gap between prototype materials and real-world applications.

Diffusion Along Dislocations Mitigates Self-Limiting Na Diffusion in Crystalline Sn

The diffusion of carrier ions in alloying anodes often develops compressive stresses in front of the propagating interface, suppressing the carrier-ion diffusion and limiting their full penetration into alloying anodes during battery cycles. This phenomenon, termed "self-limiting diffusion (SLD)", reduces the rate performance of batteries and hinders the full usage of anode materials. However, SLD is mitigated in some systems where tensile residual stresses develop at the interface, causing them to manifest significantly improved rate performance and energy capacity. Here, a comparative study of LiSi and NaSn systems to elucidate how the differing diffusion kinetics displayed by the two systems can influence SLD behaviors and the rate performance of batteries is performed. Experiments show that the Na diffusion into soft Sn crystals induces tensile stresses near the interface, promoting the nucleation of high-density dislocations. Thus-formed dislocations facilitate Na diffusion at ultrafast rates by providing pathways for dislocation pipe diffusion and alleviate SLD, making crystalline Sn suitable for fast-charging anode material. The outcomes of this study, while filling the knowledge gaps on the reasons for SLD, offer some guidelines for the appropriate choice of potential anode materials with superior rate performance and energy capacity suitable for future applications.

A Review of Recent Advancements in Electrospun Anode Materials to Improve Rechargeable Lithium Battery Performance

Although lithium-ion batteries have already had a considerable impact on making our lives smarter, healthier, and cleaner by powering smartphones, wearable devices, and electric vehicles, demands for significant improvement in battery performance have grown with the continuous development of electronic devices. Developing novel anode materials offers one of the most promising routes to meet these demands and to resolve issues present in existing graphite anodes, such as a low theoretical capacity and poor rate capabilities. Significant improvements over current commercial batteries have been identified using the electrospinning process, owing to a simple processing technique and a wide variety of electrospinnable materials. It is important to understand previous work on nanofiber anode materials to establish strategies that encourage the implementation of current technological developments into commercial lithium-ion battery production, and to advance the design of novel nanofiber anode materials that will be used in the next-generation of batteries. This review identifies previous research into electrospun nanofiber anode materials based on the type of electrochemical reactions present and provides insights that can be used to improve conventional lithium-ion battery performances and to pioneer novel manufacturing routes that can successfully produce the next generation of batteries.

Application of digital phase shifting moiré method in interface and dislocation location recognition and real strain characterization from HRTEM images

In high-resolution transmission electron microscopy (HRTEM) images of heterostructures, it is always difficult to accurately determine the interface position and identify dislocations in a large field of view at tens to hundreds of nanometers due to the small lattice differences. However, in the heterostructure, the determination of the interface position is the key to obtain the true mismatch stress/strain field of the interface. Due to the magnifying effect of the digital moiré method on small differences, digital moiré technology was applied to determine Ge/Si heterostructure interfaces and large-area identification interface dislocations in HRTEM lattice diagrams in this study. By optimizing the frequency and angle of the reference lattice, the interface and dislocation position are clearly and intuitively displayed. How to accurately determine the position of the heterostructure interface and the dislocation of the large-area recognition interface from HRTEM images are studied through simulation experiments. The results show that when the frequency of the reference lattice and the specimen lattice are close, and the angle between them is within 10°, the position of the heterostructure interface can be accurately and intuitively determined by the naked eye according to the distortion characteristics of the moiré fringe. When the frequency of the reference lattice is 0.7 to 0.9 times of the specimen lattice, and the rotation angle is within 8°, the visually clear crossover phenomenon of the moiré fringes is used for large-area identification of interface dislocations. Using the phase measurement interface position sensitivity can reach the Å level. Using the phase-shifting digital moiré method the strain field on the dislocation core at the Ge/Si heterostructure interface and the interface stress distribution were quantitatively analyzed. Compared with the Peierls-Nabarro dislocation model and the Foreman dislocation model, Foreman's variable factor α = 4 is more suitable for describing the strain field of misfit dislocations on the Ge/Si heterostructure interface.

Tin Oxide Based Nanomaterials and Their Application as Anodes in Lithium-Ion Batteries and Beyond

Herein, recent progress in the field of tin oxide (SnO2 )-based nanosized and nanostructured materials as conversion and alloying/dealloying-type anodes in lithium-ion batteries and beyond (sodium- and potassium-ion batteries) is briefly discussed. The first section addresses the importance of the initial SnO2 micro- and nanostructure on the conversion and alloying/dealloying reaction upon lithiation and its impact on the microstructure and cyclability of the anodes. A further section is dedicated to recent advances in the fabrication of diverse 0D to 3D nanostructures to overcome stability issues induced by large volume changes during cycling. Additionally, the role of doping on conductivity and synergistic effects of redox-active and -inactive dopants on the reversible lithium-storage capacity and rate capability are discussed. Furthermore, the synthesis and electrochemical properties of nanostructured SnO2 /C composites are reviewed. The broad research spectrum of SnO2 anode materials is finally reflected in a brief overview of recent work published on Na- and K-ion batteries.

In Situ Transmission Electron Microscopy for Energy Materials and Devices

Energy devices such as rechargeable batteries, fuel cells, and solar cells are central to powering a renewable, mobile, and electrified future. To advance these devices requires a fundamental understanding of the complex chemical reactions, material transformations, and charge flow that are associated with energy conversion processes. Analytical in situ transmission electron microscopy (TEM) offers a powerful tool for directly visualizing these complex processes at the atomic scale in real time and in operando. Recent advancements in energy materials and devices that have been enabled by in situ TEM are reviewed. First, the evolutionary development of TEM nanocells from the open-cell configuration to the closed-cell, and finally the full-cell, is reviewed. Next, in situ TEM studies of rechargeable ion batteries in a practical operation environment are explored, followed by applications of in situ TEM for direct observation of electrocatalyst formation, evolution, and degradation in proton-exchange membrane fuel cells, and fundamental investigations of new energy materials such as perovskites for solar cells. Finally, recent advances in the use of environmental TEM and cryogenic electron microscopy in probing clean-energy materials are presented and emerging opportunities and challenges in in situ TEM research of energy materials and devices are discussed.

Review of Recent Development of In Situ/Operando Characterization Techniques for Lithium Battery Research

The increasing demands of energy storage require the significant improvement of current Li-ion battery electrode materials and the development of advanced electrode materials. Thus, it is necessary to gain an in-depth understanding of the reaction processes, degradation mechanism, and thermal decomposition mechanisms under realistic operation conditions. This understanding can be obtained by in situ/operando characterization techniques, which provide information on the structure evolution, redox mechanism, solid-electrolyte interphase (SEI) formation, side reactions, and Li-ion transport properties under operating conditions. Here, the recent developments in the in situ/operando techniques employed for the investigation of the structural stability, dynamic properties, chemical environment changes, and morphological evolution are described and summarized. The experimental approaches reviewed here include X-ray, electron, neutron, optical, and scanning probes. The experimental methods and operating principles, especially the in situ cell designs, are described in detail. Representative studies of the in situ/operando techniques are summarized, and finally the major current challenges and future opportunities are discussed. Several important battery challenges are likely to benefit from these in situ/operando techniques, including the inhomogeneous reactions of high-energy-density cathodes, the development of safe and reversible Li metal plating, and the development of stable SEI.

Phase evolution of conversion-type electrode for lithium ion batteries

Batteries with conversion-type electrodes exhibit higher energy storage density but suffer much severer capacity fading than those with the intercalation-type electrodes. The capacity fading has been considered as the result of contact failure between the active material and the current collector, or the breakdown of solid electrolyte interphase layer. Here, using a combination of synchrotron X-ray absorption spectroscopy and in situ transmission electron microscopy, we investigate the capacity fading issue of conversion-type materials by studying phase evolution of iron oxide composited structure during later-stage cycles, which is found completely different from its initial lithiation. The accumulative internal passivation phase and the surface layer over cycling enforce a rate−limiting diffusion barrier for the electron transport, which is responsible for the capacity degradation and poor rate capability. This work directly links the performance with the microscopic phase evolution in cycled electrode materials and provides insights into designing conversion-type electrode materials for applications.

Conversion electrodes possess high energy density but suffer a rapid capacity loss over cycling compared to their intercalation equivalents. Here the authors reveal the microscopic origin of the fading behavior, showing that the formation and augmentation of passivation layers are responsible.

Metal-organic framework derived 3D graphene decorated NaTi2(PO4)3 for fast Na-ion storage

NASCION-type materials featuring super ionic conductivity are of considerable interest for energy storage in sodium ion batteries. However, the issue of inherent poor electronic conductivity of these materials represents a fundamental limitation in their utilization as battery electrodes. Here, for the first time, we develop a facile strategy for the synthesis of NASICON-type NaTi2(PO4)3/reduced graphene oxide (NTP-rGO) Na-ion anode materials from three-dimensional (3D) metal-organic frameworks (MOFs). The selected MOF serves as an in situ etching template for the titanium resource, and importantly, endows the materials with structure-directing properties for the self-assembly of graphene oxide (GO) through a one-step solvothermal process. Through the subsequent carbonization, an rGO decorated NTP architecture is obtained, which offers fast electron transfer and improved Na+ ion accessibility to active sites. Benefiting from its unique structural merits, the NTP-rGO exhibits improved sodium storage properties in terms of high capacity, excellent rate performance and good cycling life. We believe that the findings of this work provide new opportunities to design high performance NASICON-type materials for energy storage.

Atomic-Scale Observation of Electrochemically Reversible Phase Transformations in SnSe2 Single Crystals

2D materials have shown great promise to advance next-generation lithium-ion battery technology. Specifically, tin-based chalcogenides have attracted widespread attention because lithium insertion can introduce phase transformations via three types of reactions-intercalation, conversion, and alloying-but the corresponding structural changes throughout these processes, and whether they are reversible, are not fully understood. Here, the first real-time and atomic-scale observation of reversible phase transformations is reported during the lithiation and delithiation of SnSe₂ single crystals, using in situ high-resolution transmission electron microscopy complemented by first-principles calculations. Lithiation proceeds sequentially through intercalation, conversion, and alloying reactions (SnSe₂ → Li_x SnSe₂ → Li₂ Se + Sn → Li₂ Se + Li₁₇ Sn₄ ) in a manner that maintains structural and crystallographic integrity, whereas delithiation forms numerous well-aligned SnSe₂ nanodomains via a homogeneous deconversion process, but gradually loses the coherent orientation in subsequent cycling. Furthermore, alloying and dealloying reactions cause dramatic structural reorganization and thereby consequently reduce structural stability and electrochemical cyclability, which implies that deep discharge for Sn chalcogenide electrodes should be avoided. Overall, the findings elucidate atomistic lithiation and delithiation mechanisms in SnSe₂ with potential implications for the broader class of 2D metal chalcogenides.

Electrochemical solid-state amorphization in the immiscible Cu-Li system

As a typical immiscible binary system, copper (Cu) and lithium (Li) show no alloying and chemical intermixing under normal circumstances. Here we show that, when decreasing Cu nanoparticle sizes into ultrasmall range, the nanoscale size effect can play a subtle yet critical role in mediating the chemical activity of Cu and therefore its miscibility with Li, such that the electrochemical alloying and solid-state amorphization will occur in such an immiscible system. This unusual observation was accomplished by performing in-situ studies of the electrochemical lithiation processes of individual CuO nanowires inside a transmission electron microscopy (TEM). Upon lithiation, CuO nanowires are first electrochemically reduced to form discrete ultrasmall Cu nanocrystals that, unexpectedly, can in turn undergo further electrochemical lithiation to form amorphous CuLi_x nanoalloys. Real-time TEM imaging unveils that there is a critical grain size (ca. 6 nm), below which the nanocrystalline Cu particles can be continuously lithiated and amorphized. The possibility that the observed solid-state amorphization of Cu-Li might be induced by electron beam irradiation effect can be explicitly ruled out; on the contrary, it was found that electron beam irradiation will lead to the dealloying of as-formed amorphous CuLi_x nanoalloys.

Quantitative evaluation of the interface lattice quality of a strain superlattice by strain analysis

The lattice quality of strain superlattice structures in Quantum Cascade Lasers (QCLs) directly influences the photoelectric properties and service life of the lasers. However, the evaluation method for lattice quality on the nanoscale is not very well developed at present, especially for interface lattice quality assessment. In this investigation, all atoms positioned in the multiple interface layers can be simultaneously and accurately determined through Subset Geometric Phase Analysis (S-GPA) combined with a Peak Finding (PF) method and an Optimal Approximation Algorithm (OAA) with a sensitivity of about 0.04 Å. Based on the determined interface location, the strain distribution in all layers of the superlattice structure was simultaneously measured using the improved S-GPA by means of the optimal selection of multiple reference areas. A quantitative evaluation of the strain/stress compensation effect was then carried out based on the theoretical model of elastic mechanics. The proposed method was successfully applied to evaluating the lattice quality of an In0.6Ga0.4As/In0.44Al0.56As superlattice structure grown by Molecular Beam Epitaxy (MBE). The obtained results show that the interface lattices are almost perfect with a uniform thickness of layers, without any defects and stress concentration. Each In0.44Al0.56As layer and adjacent In0.6Ga0.4As layers provided effective strain/stress compensation for each other, reducing the possibility of forming dislocations. In one period, the active region has been properly strain-balanced to give a nearly net zero strain. The proposed method can not only be applied in evaluating the growth quality of the superlattice structure with a large field of view, but also provide quantitative experimental data for further improving the superlattice design.

Recent Advances in Designing High-Capacity Anode Nanomaterials for Li-Ion Batteries and Their Atomic-Scale Storage Mechanism Studies

Lithium-ion batteries (LIBs) have been widely applied in portable electronics (laptops, mobile phones, etc.) as one of the most popular energy storage devices. Currently, much effort has been devoted to exploring alternative high-capacity anode materials and thus potentially constructing high-performance LIBs with higher energy/power density. Here, high-capacity anode nanomaterials based on the diverse types of mechanisms, intercalation/deintercalation mechanism, alloying/dealloying reactions, conversion reaction, and Li metal reaction, are reviewed. Moreover, recent studies in atomic-scale storage mechanism by utilizing advanced microscopic techniques, such as in situ high-resolution transmission electron microscopy and other techniques (e.g., spherical aberration-corrected scanning transmission electron microscopy, cryoelectron microscopy, and 3D imaging techniques), are highlighted. With the in-depth understanding on the atomic-scale ion storage/release mechanisms, more guidance is given to researchers for further design and optimization of anode nanomaterials. Finally, some possible challenges and promising future directions for enhancing LIBs' capacity are provided along with the authors personal viewpoints in this research field.

Multistep Lithiation of Tin Sulfide: An Investigation Using in Situ Electron Microscopy

Two-dimensional (2D) metal sulfides have been widely explored as promising electrodes for lithium-ion batteries since their two-dimensional layered structure allows lithium ions to intercalate between layers. For tin disulfide, the lithiation process proceeds via a sequence of three different types of reactions: intercalation, conversion, and alloying, but the full scenario of reaction dynamics remains nebulous. Here, we investigate the dynamical process of the multistep reactions using in situ electron microscopy and discover the formation of an intermediate rock-salt phase with the disordering of Li and Sn cations after initial 2D intercalation. The disordered cations occupy all the octahedral sites and block the channels for intercalation, which alter the reaction pathways during further lithiation. Our first-principles calculations of the nonequilibrium lithiation of SnS₂ corroborate the energetic preference of the disordered rock-salt structure over known layered polymorphs. The in situ observations and calculations suggest a two-phase reaction nature for intercalation, disordering, and following conversion reactions. In addition, in situ delithiation observation confirms that the alloying reaction is reversible, while the conversion reaction is not, which is consistent with the ex situ analysis. This work reveals the full lithiation characteristic of SnS₂ and sheds light on the understanding of complex multistep reactions in 2D materials.

Localized concentration reversal of lithium during intercalation into nanoparticles

Nanoparticulate electrodes, such as Li _x FePO₄, have unique advantages over their microparticulate counterparts for the applications in Li-ion batteries because of the shortened diffusion path and access to nonequilibrium routes for fast Li incorporation, thus radically boosting power density of the electrodes. However, how Li intercalation occurs locally in a single nanoparticle of such materials remains unresolved because real-time observation at such a fine scale is still lacking. We report visualization of local Li intercalation via solid-solution transformation in individual Li _x FePO₄ nanoparticles, enabled by probing sub-angstrom changes in the lattice spacing in situ. The real-time observation reveals inhomogeneous intercalation, accompanied with an unexpected reversal of Li concentration at the nanometer scale. The origin of the reversal phenomenon is elucidated through phase-field simulations, and it is attributed to the presence of structurally different regions that have distinct chemical potential functions. The findings from this study provide a new perspective on the local intercalation dynamics in battery electrodes.

Kinetically-Driven Phase Transformation during Lithiation in Copper Sulfide Nanoflakes

Two-dimensional (2D) transition metal chalcogenides have been widely studied and utilized as electrode materials for lithium ion batteries due to their unique layered structures to accommodate reversible lithium insertion. Real-time observation and mechanistic understanding of the phase transformations during lithiation of these materials are critically important for improving battery performance by controlling structures and reaction pathways. Here, we use in situ transmission electron microscopy methods to study the structural, morphological, and chemical evolutions in individual copper sulfide (CuS) nanoflakes during lithiation. We report a highly kinetically driven phase transformation in which lithium ions rapidly intercalate into the 2D van der Waals-stacked interlayers in the initial stage, and further lithiation induces the Cu extrusion via a displacement reaction mechanism that is different from the typical conversion reactions. Density functional theory calculations have confirmed both the thermodynamically favored and the kinetically driven reaction pathways. Our findings elucidate the reaction pathways of the Li/CuS system under nonequilibrium conditions and provide valuable insight into the atomistic lithiation mechanisms of transition metal sulfides in general.

Unlocking the potential of SnS2: Transition metal catalyzed utilization of reversible conversion and alloying reactions

The alloying-dealloying reactions of SnS₂ proceeds with the initial conversion reaction of SnS₂ with lithium that produces Li₂S. Unfortunately, due to the electrochemical inactivity of Li₂S, the conversion reaction of SnS₂ is irreversible, which significantly limit its potential applications in lithium-ion batteries. Herein, a systematic understanding of transition metal molybdenum (Mo) as a catalyst in SnS₂ anode is presented. It is found that Mo catalyst is able to efficiently promote the reversible conversion of Sn to SnS₂. This leads to the utilization of both conversion and alloying reactions in SnS₂ that greatly increases lithium storage capability of SnS₂. Mo catalyst is introduced in the form of MoS₂ grown directly onto self-assembled vertical SnS₂ nanosheets that anchors on three-dimensional graphene (3DG) creating a hierarchal nanostructured named as SnS₂/MoS₂/3DG. The catalytic effect results in a significantly enhanced electrochemical properties of SnS₂/MoS₂/3DG; a high initial Coulombic efficiency (81.5%) and high discharge capacities of 960.5 and 495.6 mA h g⁻¹ at current densities of 50 and 1000 mA g⁻¹, respectively. Post cycling investigations using ex situ TEM and XPS analysis verifies the successful conversion reaction of SnS₂ mediated by Mo. The successful integration of catalyst on alloying type metal sulfide anode creates a new avenue towards high energy density lithium anodes.

Multi-yolk-shell SnO2/Co3Sn2@C Nanocubes with High Initial Coulombic Efficiency and Oxygen Reutilization for Lithium Storage

The challenging problems of SnO₂ anode material for lithium ion batteries are the poor electronic conductivity and the low oxygen reutilization due to the irreversibility of Li₂O generated in the initial discharge leading to a theoretical initial Coulombic efficiency (ICE) of only 52.4%. Different from these strategies, this work proposes a novel strategy to level up the oxygen reutilization in SnO₂ by introducing Co₃Sn₂ nanoalloys which can release Co atoms to reversibly react with Li₂O instead. According to this protocol, multi-yolk-shell SnO₂/Co₃Sn₂@C nanocubes are designed and successfully prepared using hollow CoSn(OH)₆ nanocubes as precursors followed a hydrothermal carbon coating and calcination treatment. The unique multi-yolk-shell nanostructure offers adequate breathing space for the volumetric deformation during long-term cycling. Moreover, the removal of Li₂O allows a high electronic conductivity and resultant rate performance. As a result, the efficient reutilization of oxygen enables a high ICE of 71.7% and a reversible capacity of 1003 mA h g^-1 after 200 cycles at 100 mA g^-1. Cyclic voltammetry, cycling performance at different voltage windows, and X-ray photoelectron spectroscopy confirm the proposed mechanism. This strategy employing oxygen-poor metals or alloys provides a novel approach to enhance the oxygen reutilization in SnO₂ for higher reversibility.

Localized Mechanical Stress Induced Ionic Redistribution in a Layered LiCoO2 Cathode

Controlling the transport of ions within electrodes is highly desirable for the operation of rechargeable ion batteries. Here, for the first time, we report the role of mechanical stress in controlling the redistribution of lithium ions in a layered LiCoO₂ electrode at a resolution of ∼100 nm. Under a higher stress field, more active redistribution of lithium ions was observed along the grain boundaries than the interiors of the layered LiCoO₂. The dynamic force ramping test proved the external stress field (<100 nN) is capable of inducing the resistive-switching effect of the layered LiCoO₂. The comparison test on the highly ordered pyrolytic graphite (HOPG) substrate further demonstrated the improved current responses from the layered LiCoO₂ resulted from the deficiency of lithium ions, rather than the increase of tip-sample contact area. Our findings will pave the road for a full understanding of how mechanical stimulus can affect the distribution of ions in the layered electrodes of rechargeable ion batteries.

Kinetic Phase Evolution of Spinel Cobalt Oxide during Lithiation

Spinel cobalt oxide has been proposed to undergo a multiple-step reaction during the electrochemical lithiation process. Understanding the kinetics of the lithiation process in this compound is crucial to optimize its performance and cyclability. In this work, we have utilized a low-angle annular dark-field scanning transmission electron microscopy method to visualize the dynamic reaction process in real time and study the reaction kinetics at different rates. We show that the particles undergo a two-step reaction at the single-particle level, which includes an initial intercalation reaction followed by a conversion reaction. At low rates, the conversion reaction starts after the intercalation reaction has fully finished, consistent with the prediction of density functional theoretical calculations. At high rates, the intercalation reaction is overwhelmed by the subsequently nucleated conversion reaction, and the reaction speeds of both the intercalation and conversion reactions are increased. Phase-field simulations show the crucial role of surface diffusion rates of lithium ions in controlling this process. This work provides microscopic insights into the reaction dynamics in non-equilibrium conditions and highlights the effect of lithium diffusion rates on the overall reaction homogeneity as well as the performance.

Visualizing non-equilibrium lithiation of spinel oxide via in situ transmission electron microscopy

Spinel transition metal oxides are important electrode materials for lithium-ion batteries, whose lithiation undergoes a two-step reaction, whereby intercalation and conversion occur in a sequential manner. These two reactions are known to have distinct reaction dynamics, but it is unclear how their kinetics affects the overall electrochemical response. Here we explore the lithiation of nanosized magnetite by employing a strain-sensitive, bright-field scanning transmission electron microscopy approach. This method allows direct, real-time, high-resolution visualization of how lithiation proceeds along specific reaction pathways. We find that the initial intercalation process follows a two-phase reaction sequence, whereas further lithiation leads to the coexistence of three distinct phases within single nanoparticles, which has not been previously reported to the best of our knowledge. We use phase-field theory to model and describe these non-equilibrium reaction pathways, and to directly correlate the observed phase evolution with the battery's discharge performance.

Non-equilibrium intercalation reactions may determine the performance of lithium-ion battery materials undergoing lithiation, but it is difficult to probe in real time. Here, the authors use in situ electron microscopy to identify kinetically-driven phase evolution in magnetite single nanoparticles.

New Insights into Electrochemical Lithiation/Delithiation Mechanism of α-MoO3 Nanobelt by in Situ Transmission Electron Microscopy

The α-MoO3 nanobelt has great potential for application as anode of lithium ion batteries (LIBs) because of its high capacity and unique one-dimensional layer structure. However, its fundmental electrochemical failure mechanism during first lithiation/delithiation process is still unclear. Here, we constructed an electrochemical setup within α-MoO3 nanobelt anode inside a transmission electron microscope to observe in situ the mircostructure evolution during cycles. Upon first lithiation, the α-MoO3 nanobelt converted into numerous Mo nanograins within the Li2O matrix, with an obvious size expansion. Interestingly, α-MoO3 nanobelt was found to undergo a two-stage delithiation process. Mo nanograins were first transformed into crystalline Li(1.66)Mo(0.66)O2 along with the disappearance of Li2O and size shrink, followed by the conversion to amorphous Li2MoO3. This irreversible phase conversion should be responsible for the large capacity loss in first cycle. In addition, a fully reversile phase conversion between crystalline Mo and amorphous Li2MoO3 was revealed accompanying the formation and disapperance of the Li2O layer during the subsequent cycles. Our experiments provide direct evidence to deeply understand the distinctive electrochemical lithiation/delithiation behaviors of α-MoO3 nanobelt, shedding light onto the development of α-MoO3 anode for LIBs.

Two-dimensional graphitic carbon nitride nanosheets for biosensing applications

Two-dimensional graphitic carbon nitride nanosheets (CNNSs) with planar graphene-like structure have stimulated increasingly research interest in recent years due to their unique physicochemical properties. CNNSs possess superior stability, high fluorescence quantum yield, low-toxicity, excellent biocompatibility, unique electroluminescent and photoelectrochemical properties, which make them appropriate candidates for biosensing. In this review, we first introduce the preparation and unique properties of CNNSs, with emphasis on their superior properties for biosensing. Then, recent advances of CNNSs in photoelectrochemical biosensing, electrochemiluminescence biosensing and fluorescence biosensing are highlighted. An additional attention is paid to the marriage of CNNSs and nucleic acids, which exhibits great potentials in both biosensing and intracellular imaging. Finally, current challenges and opportunities of this 2D material are outlined. Inspired by the unique properties of CNNSs and their advantages in biological applications, we expect that more attention will be drawn to this promising 2D material and extensive applications can be found in bioanalysis and diseases diagnosis.

New insights into the electrode mechanism of lithium sulfur batteries via air-free post-test analysis

Schematic models of ball-milled Li₂S cathodes and carbon-coated Li₂S (Li₂S@C) cathodes during charge/discharge cycles.

Improved coulombic efficiency and cycleability of SnO2–Cu–graphite composite anode with dual scale embedding structure

SnO₂–Cu–graphite composite has unique dual scale embedding structure through two-step milling process, the nanocrystalline Cu and microsized graphite jointly cause the significant improvement in the coulombic efficiency and cyclic stability.

Lithiation-induced crystal restructuring of hydrothermally prepared Sn/TiO2 nanocrystallite with substantially enhanced capacity and cycling performance for lithium-ion battery

Sn dopants undergo restructuring into Ti sites of TiO₂ upon lithiation reaction. These Sn dopants attract Li to form local SnLi_x alloys, which sufficiently increase the capacity of Sn-substituted TiO₂ as a negative electrode material.

Coupling In Situ TEM and Ex Situ Analysis to Understand Heterogeneous Sodiation of Antimony

We employed an in situ electrochemical cell in the transmission electron microscope (TEM) together with ex situ time-of-flight, secondary-ion mass spectrometry (TOF-SIMS) depth profiling, and FIB-helium ion scanning microscope (HIM) imaging to detail the structural and compositional changes associated with Na/Na(+) charging/discharging of 50 and 100 nm thin films of Sb. TOF-SIMS on a partially sodiated 100 nm Sb film gives a Na signal that progressively decreases toward the current collector, indicating that sodiation does not proceed uniformly. This heterogeneity will lead to local volumetric expansion gradients that would in turn serve as a major source of intrinsic stress in the microstructure. In situ TEM shows time-dependent buckling and localized separation of the sodiated films from their TiN-Ge nanowire support, which is a mechanism of stress-relaxation. Localized horizontal fracture does not occur directly at the interface, but rather at a short distance away within the bulk of the Sb. HIM images of FIB cross sections taken from sodiated half-cells, electrically disconnected, and aged at room temperature, demonstrate nonuniform film swelling and the onset of analogous through-bulk separation. TOF-SIMS highlights time-dependent segregation of Na within the structure, both to the film-current collector interface and to the film surface where a solid electrolyte interphase (SEI) exists, agreeing with the electrochemical impedance results that show time-dependent increase of the films' charge transfer resistance. We propose that Na segregation serves as a secondary source of stress relief, which occurs over somewhat longer time scales.

Sodiation Kinetics of Metal Oxide Conversion Electrodes: A Comparative Study with Lithiation

The development of sodium ion batteries (NIBs) can provide an alternative to lithium ion batteries (LIBs) for sustainable, low-cost energy storage. However, due to the larger size and higher m/e ratio of the sodium ion compared to lithium, sodiation reactions of candidate electrodes are expected to differ in significant ways from the corresponding lithium ones. In this work, we investigated the sodiation mechanism of a typical transition metal-oxide, NiO, through a set of correlated techniques, including electrochemical and synchrotron studies, real-time electron microscopy observation, and ab initio molecular dynamics (MD) simulations. We found that a crystalline Na2O reaction layer that was formed at the beginning of sodiation plays an important role in blocking the further transport of sodium ions. In addition, sodiation in NiO exhibits a "shrinking-core" mode that results from a layer-by-layer reaction, as identified by ab initio MD simulations. For lithiation, however, the formation of Li antisite defects significantly distorts the local NiO lattice that facilitates Li insertion, thus enhancing the overall reaction rate. These observations delineate the mechanistic difference between sodiation and lithiation in metal-oxide conversion materials. More importantly, our findings identify the importance of understanding the role of reaction layers on the functioning of electrodes and thus provide critical insights into further optimizing NIB materials through surface engineering.

High rate and durable, binder free anode based on silicon loaded MoO3 nanoplatelets

In order to make fast-charging batteries a reality for electric vehicles, durable, more energy dense and high-current density resistant anodes need to be developed. With such purpose, a low lithiation potential of 0.2 V vs. Li/Li⁺ for MoO₃ nanoplatelet arrays is reported here for anodes in a lithium ion battery. The composite material here presented affords elevated charge capacity while at the same time withstands rapid cycling for longer periods of time. Li₂MoO₄ and Li_1.333Mo_0.666O₂ were identified as the products of lithiation of pristine MoO₃ nanoplatelets and silicon-decorated MoO₃, respectively, accounting for lower than previously reported lithiation potentials. MoO₃ nanoplatelet arrays were deposited using hot-wire chemical vapor deposition. Due to excellent voltage compatibility, composite lithium ion battery anodes comprising molybdenum oxide nanoplatelets decorated with silicon nanoparticles (0.3% by wt.) were prepared using an ultrasonic spray. Silicon decorated MoO₃ nanoplatelets exhibited enhanced capacity of 1037 mAh g⁻¹ with exceptional cyclablity when charged/discharged at high current densities of 10 A g⁻¹.

Atomic resolution observation of conversion-type anode RuO₂ during the first electrochemical lithiation

Transition metal oxides have attracted great interest as alternative anode materials for rechargeable lithium-ion batteries. Among them, ruthenium dioxide is considered to be a prototype material that reacts with the Li ions in the conversion type. In situ transmission electron microscopy reveals a two-step process during the initial lithiation of the RuO2 nanowire anode at atomic resolution. The first step is characterized by the formation of the intermediate phase LixRuO2 due to the Li-ion intercalation. The following step is manifested by the solid-state amorphization reaction driven by advancing the reaction front. The crystalline/amorphous interface is consisted of {011} atomic terraces, revealing the orientation-dependent mobility. In the crystalline matrix, lattice disturbance and dislocation are identified to be two major stress-induced distortions. The latter can be effective diffusion channels, facilitating transportation of the Li ions inside the bulk RuO2 crystal and further resulting in non-uniform Li-ion distribution. It is expected that the local enrichment of the Li ions may account for the homogeneous nucleation of dislocations in the bulk RuO2 crystal and the special island-like structures. These results elucidate the structural evolution and the phase transformation during electrochemical cycling, which sheds light on engineering RuO2 anode materials.

In situ SEM study of lithium intercalation in individual V2O5 nanowires

Progress in rational engineering of Li-ion batteries requires better understanding of the electrochemical processes and accompanying transformations in the electrode materials on multiple length scales. In spite of recent progress in utilizing transmission electron microscopy (TEM) to analyze these materials, in situ scanning electron microscopy (SEM) was mostly overlooked as a powerful tool that allows probing these phenomena on the nano and mesoscale. Here we report on in situ SEM study of lithiation in a V2O5-based single-nanobelt battery with ionic liquid electrolyte. Coupled with cyclic voltammetry measurements, in situ SEM revealed the peculiarities of subsurface intercalation, formation of a solid-electrolyte interface (SEI) and electromigration of liquid. We observed that single-crystalline vanadia nanobelts do not undergo large-scale amorphization or fracture during electrochemical cycling, but rather transform topochemically with only a slight shape distortion. The SEI layer seems to have significant influence on the lithium ion diffusion and overall capacity of the single-nanobelt battery.

In situ observation of divergent phase transformations in individual sulfide nanocrystals

Inorganic nanocrystals have attracted widespread attention both for their size-dependent properties and for their potential use as building blocks in an array of applications. A complete understanding of chemical transformations in nanocrystals is important for controlling structure, composition, and electronic properties. Here, we utilize in situ high-resolution transmission electron microscopy to study structural and morphological transformations in individual sulfide nanocrystals (copper sulfide, iron sulfide, and cobalt sulfide) as they react with lithium. The experiments reveal the influence of structure and composition on the transformation pathway (conversion versus displacement reactions), and they provide a high-resolution view of the unique displacement reaction mechanism in copper sulfide in which copper metal is extruded from the crystal. The structural similarity between the initial and final phases, as well as the mobility of ions within the crystal, are seen to exert a controlling influence on the reaction pathway.

Twin boundary-assisted lithium ion transport

With the increased need for high-rate Li-ion batteries, it has become apparent that new electrode materials with enhanced Li-ion transport should be designed. Interfaces, such as twin boundaries (TBs), offer new opportunities to navigate the ionic transport within nanoscale materials. Here, we demonstrate the effects of TBs on the Li-ion transport properties in single crystalline SnO2 nanowires. It is shown that the TB-assisted lithiation pathways are remarkably different from the previously reported lithiation behavior in SnO2 nanowires without TBs. Our in situ transmission electron microscopy study combined with direct atomic-scale imaging of the initial lithiation stage of the TB-SnO2 nanowires prove that the lithium ions prefer to intercalate in the vicinity of the (101̅) TB, which acts as conduit for lithium-ion diffusion inside the nanowires. The density functional theory modeling shows that it is energetically preferred for lithium ions to accumulate near the TB compared to perfect neighboring lattice area. These findings may lead to the design of new electrode materials that incorporate TBs as efficient lithium pathways, and eventually, the development of next generation rechargeable batteries that surpass the rate performance of the current commercial Li-ion batteries.