Electronic structure and chemical nature of oxygen dopant states in carbon nanotubes

Isomerization of surface functionalized SWCNTs and the critical influence on photoluminescence: static calculations and excited-state dynamics simulations

Single-walled carbon nanotubes (SWCNTs) functionalized with sparse surface chemical groups are promising for a variety of optical applications such as quantum information and bio-imaging. However, the luminescence efficiencies and stability, two key aspects, undoubtedly govern their practical usage. Herein, we assess the surface migration of oxygen and triazine groups on as-modified SWCNT fragments by adopting transition state theory and explore the de-excitation of oxygen-functionalized SWCNT fragments by performing non-adiabatic excited-state dynamics simulations. According to the predicted moderate or even small reaction barriers, the migration of both oxygen and triazine groups is feasible from an sp3 defect configuration forming an energetically more stable sp2 configuration at moderate or even room temperatures. Such isomerization leads to drastically different light emission capabilities as indicated by the large or zero oscillator strengths. During the dynamics simulations, the lowest excited singlet (S1) state rapidly decays in energy within 20 fs and then fluctuates until the end, providing insights into the emission mechanism of SWCNTs. This study highlights the potential intrinsic limitations of surface-functionalized SWCNTs for luminescence applications.

Correlation Measurements for Carbon Nanotubes with Quantum Defects

Single-photon sources are essential building blocks for the development of photonic quantum technology. Regarding potential practical application, an on-demand electrically driven quantum-light emitter on a chip is notably crucial for photonic integrated circuits. Here, we propose functionalized single-walled carbon nanotube field-effect transistors as a promising solid-state quantum-light source by demonstrating photon antibunching behavior via electrical excitation. The sp3 quantum defects were formed on the surface of (7, 5) carbon nanotubes by 3,5-dichlorophenyl functionalization, and individual carbon nanotubes were wired to graphene electrode pairs. Filtered electroluminescent defect-state emission at 77 K was coupled into a Hanbury Brown and Twiss experiment setup, and single-photon emission was observed by performing second-order correlation function measurements. We discuss the dependence of the intensity correlation measurement on electrical power and emission wavelength, highlighting the challenges of performing such measurements while simultaneously analyzing acquired data. Our results indicate a route toward room-temperature electrically triggered single-photon emission.

Photo-Activated, Solid-State Introduction of Luminescent Oxygen Defects into Semiconducting Single-Walled Carbon Nanotubes

Oxygen defects in semiconducting single-walled carbon nanotubes (SWCNTs) are localized disruptions in the carbon lattice caused by the formation of epoxy or ether groups, commonly through wet-chemical reactions. The associated modifications of the electronic structure can result in luminescent states with emission energies below those of pristine SWCNTs in the near-infrared range, which makes them promising candidates for applications in biosensing and as single-photon emitters. Here, we demonstrate the controlled introduction of luminescent oxygen defects into networks of monochiral (6,5) SWCNTs using a solid-state photocatalytic approach. UV irradiation of SWCNTs on the photoreactive surfaces of the transition metal oxides TiOx and ZnOx in the presence of trace amounts of water and oxygen results in the creation of reactive oxygen species that initiate radical reactions with the carbon lattice and the formation of oxygen defects. The created ether-d and epoxide-l defect configurations give rise to two distinct red-shifted emissive features. The chemical and dielectric properties of the photoactive oxides influence the final defect emission properties, with oxygen-functionalized SWCNTs on TiOx substrates being brighter than those on ZnOx or pristine SWCNTs on glass. The photoinduced functionalization of nanotubes is further employed to create lateral patterns of oxygen defects in (6,5) SWCNT networks with micrometer resolution and thus spatially controlled defect emission.

Infrared Light-Emitting Diodes Based on Chirality-Sorted Carbon Nanotube Films

An important goal in carbon nanotube optoelectronics is to achieve a high-performance near-infrared light source. But there are still many challenges such as the purity of single-walled carbon nanotube (SWCNT) chirality, nonradiative defects, thin-film quality, and device structure design. Here, we realize infrared light-emitting diodes (LEDs) based on chirality-sorted (10, 5) SWCNT network films, which operate at a low bias voltage and emit at a telecom O band of 1290 nm. Asymmetric palladium (Pd) and hafnium (Hf) contacts are used as electrodes for hole and electron injection, respectively. However, the large Schottky barrier at the interface of the SWCNTs and the Hf electrode, primarily resulting from the polymer wrapped on the nanotube surface during the sorting process, leads to inefficient electron injection and thus a low electroluminescence efficiency. We find that the efficiency of electron injection can be improved by the local doping of the nanotubes with dielectric layers of YOX-HfO2, which reduces the Schottky barrier at the SWCNT/Hf interface. Accordingly, the (10, 5) SWCNT film-based LED achieves an external quantum efficiency of larger than 0.05% without any optical coupling structure. With further improvement, we expect that such an infrared light source will have great application potential in the carbon nanotube monolithic optoelectronic integrated system and on-chip optical interconnection, especially in the field of short-distance optical fiber communications and data center.

Broken Symmetry Optical Transitions in (6,5) Single-Walled Carbon Nanotubes Containing sp3 Defects Revealed by First-Principles Theory

We present a first-principles many-body perturbation theory study of nitrophenyl-doped (6,5) single-walled nanotubes (SWCNTs) to understand how sp3 doping impacts the excitonic properties. sp3-doped SWCNTs are promising as a class of optoelectronic materials with bright tunable photoluminescence, long spin coherence, and single-photon emission (SPE), motivating the study of spin excitations. We predict that the dopant results in a single unpaired spin localized around the defect site, which induces multiple low-energy excitonic peaks. By comparing optical absorption and photoluminescence from experiment and theory, we identify the transitions responsible for the red-shifted, defect-induced E11* peak, which has demonstrated SPE for some dopants; the presence of this state is due to both the symmetry-breaking associated with the defect and the presence of the defect-induced in-gap state. Furthermore, we find an asymmetry between the contribution of the two spin channels, suggesting that this system has potential for spin-selective optical transitions.

Recent progress in controlling the photoluminescence properties of single-walled carbon nanotubes by oxidation and alkylation

The functionalization of single-walled carbon nanotubes (SWCNTs) has received considerable attention in the last decade since highly efficient near-infrared photoluminescence (PL) has been observed to be red-shifted compared with the intrinsic PL peak of pristine SWCNTs. The PL wavelength has been manipulated using arylation reactions with aryldiazonium salts and aryl halides. Additionally, simple oxidation and alkylation reactions have proven effective in extensively adjusting the PL wavelength, with the resulting PL efficiency varying based on the chosen reaction techniques and molecular structures. This review discusses the latest developments in tailoring the PL attributes of SWCNTs by oxidation and alkylation processes. (6,5) SWCNTs exhibit intrinsic emission at 980 nm, and the PL wavelength can be controlled in the range of 1100-1320 nm by chemical modification. In addition, recent developments in chiral separation techniques have increased our understanding of the control of the PL wavelength, extending to the selection of excitation and emission wavelengths, by chemical modification of SWCNTs with different chiral indices.

Control of functionalized single-walled carbon nanotube photoluminescence via competition between thermal rearrangement and elimination

We conducted the chiral separation of functionalized single-walled carbon nanotubes (SWNTs) with dibromopropane derivatives. Depending on their chirality and diameter, the thermal treatment of functionalized SWNTs leads to a shift in the emission radiation to longer wavelengths owing to rearrangement reaction in competition with elimination reaction.

Utilizing Ultraviolet Photons to Generate Single-Photon Emitters in Semiconductor Monolayers

The understanding and controlled creation of atomic defects in semiconductor transition metal dichalcogenides (TMDs) are highly relevant to their applications in high-performance quantum optics and nanoelectronic devices. Here, we demonstrate a versatile approach in generating single-photon emitters in MoS₂ monolayers using widely attainable UV light. We discover that only defects engendered by UV photons in vacuum exhibit single-photon-emitter characteristics, whereas those created in air lack quantum emission attributes. In combination with theoretical calculations, we assign the defects generated in vacuum to unpassivated sulfur vacancies, whose highly localized midgap states give rise to single-photon emission. In contrast, UV irradiation of the MoS₂ monolayers in air results in oxygen-passivated sulfur vacancies, whose optical properties are likely governed by their pristine band-to-defect band optical transitions. These findings suggest that widely available light sources such as UV light can be utilized for creating quantum photon sources in TMDs.

Localized Charge on Surfactant-Wrapped Single-Walled Carbon Nanotubes

As-synthesized, semiconducting single-walled carbon nanotubes (SWCNTs) are nominally charge neutral. However, ionic surfactants that are commonly used to disperse SWCNTs in solution can lead to significantly charged aggregates adsorbed to the nanotube. Here, electrostatic force microscopy (EFM) was used to characterize the static-charge interactions between individual SWCNTs and the local environment. We report nonuniform spatial charge distributions with highly varying magnitudes ranging between ±15 e associated with surfactant coverage on long SWCNTs (>1.5 μm). EFM images acquired after resonant photoexcitation demonstrate charge carrier localization due to electrostatic interactions with charged surfactant aggregates. Charge densities as measured by EFM are used to estimate the depth of this electrostatically induced potential well, calculated to be on the order of hundreds of millielectronvolts, suggesting that surfactant charges heterogeneously covering SWCNTs provide traps for excitons potentially leading to their localization.

Room Temperature Lasing from Semiconducting Single-Walled Carbon Nanotubes

Miniaturized near-infrared semiconductor lasers that are able to generate coherent light with low energy consumption have widespread applications in fields such as optical interconnects, neuromorphic computing, and deep-tissue optogenetics. With optical transitions at near-infrared wavelengths, diameter-tunable electronic structures, and superlative optoelectronic properties, semiconducting single-walled carbon nanotubes (SWCNTs) are promising candidates for nanolaser applications. However, despite significant efforts in this direction and recent progress toward enhancing spontaneous emission from SWCNTs through Purcell effects, SWCNT-based excitonic lasers have not yet been demonstrated. Leveraging an optimized cavity-emitter integration scheme enabled by a self-assembly process, here we couple SWCNT emission to the whispering gallery modes supported by polymer microspheres, resulting in room temperature excitonic lasing with an average lasing threshold of 4.5 kW/cm². The high photostability of SWCNTs allows stable lasing for prolonged duration with minimal degradation. This experimental realization of excitonic lasing from SWCNTs, combined with their versatile electronic and optical properties that can be further controlled by chemical modification, offers far-reaching opportunities for tunable near-infrared nanolasers that are applicable for optical signal processing, in vivo biosensing, and optoelectronic devices.

Azide modification forming luminescent sp2 defects on single-walled carbon nanotubes for near-infrared defect photoluminescence

Azide functionalization produced luminescent sp²-type defects on single-walled carbon nanotubes, by which defect photoluminescence appeared in near infrared regions (1116 nm). Changes in exciton properties were induced by localization effects at the defect sites, creating exciton-engineered nanomaterials based on the defect structure design.

Recent Advances in Structure Separation of Single-Wall Carbon Nanotubes and Their Application in Optics, Electronics, and Optoelectronics

Structural control of single-wall carbon nanotubes (SWCNTs) with uniform properties is critical not only for their property modulation and functional design but also for applications in electronics, optics, and optoelectronics. To achieve this goal, various separation techniques have been developed in the past 20 years through which separation of high-purity semiconducting/metallic SWCNTs, single-chirality species, and even their enantiomers have been achieved. This progress has promoted the property modulation of SWCNTs and the development of SWCNT-based optoelectronic devices. Here, the recent advances in the structure separation of SWCNTs are reviewed, from metallic/semiconducting SWCNTs, to single-chirality species, and to enantiomers by several typical separation techniques and the application of the corresponding sorted SWCNTs. Based on the separation procedure, efficiency, and scalability, as well as, the separable SWCNT species, purity, and quantity, the advantages and disadvantages of various separation techniques are compared. Combined with the requirements of SWCNT application, the challenges, prospects, and development direction of structure separation are further discussed.

Absolute Quantification of sp3 Defects in Semiconducting Single-Wall Carbon Nanotubes by Raman Spectroscopy

The functionalization of semiconducting single-wall carbon nanotubes (SWCNTs) with luminescent sp³ defects creates red-shifted emission features in the near-infrared and boosts their photoluminescence quantum yields (PLQYs). While multiple synthetic routes for the selective introduction of sp³ defects have been developed, a convenient metric to precisely quantify the number of defects on a SWCNT lattice is not available. Here, we present a direct and simple quantification protocol based on a linear correlation of the integrated Raman D/G⁺ signal ratios and defect densities as extracted from PLQY measurements. Corroborated by a statistical analysis of single-nanotube emission spectra at cryogenic temperature, this method enables the quantitative evaluation of sp³ defect densities in (6,5) SWCNTs with an error of ±3 defects per micrometer and the determination of oscillator strengths for different defect types. The developed protocol requires only standard Raman spectroscopy and is independent of the defect configuration, dispersion solvent, and nanotube length.

Streptavidin-Conjugated Oxygen-Doped Single-Walled Carbon Nanotubes as Near-Infrared Labels for Immunoassays

Single-walled carbon nanotubes (CNTs) are promising candidates for near-infrared (NIR) fluorescent labels in diagnostic fields. We report a complex of oxygen-doped CNT (o-CNT) and streptavidin (SA) for preparing CNT-based NIR labels with a high reaction efficiency in immunoassays. This complex specifically binds to biotin molecules by conjugating a linker molecule of phospholipid polyethylene glycol (PL-PEG) to SA (o-CNT-SA). The immunoprecipitation reaction efficiency between o-CNT-SA and biotin reaches 79.3% when the surface of o-CNTs is uniformly covered with SA-conjugated PL-PEG. The strong affinity between SA and biotin is useful for preparing CNT-based sensitive NIR fluorescent labels.

Quantum Light Emission from Coupled Defect States in DNA-Functionalized Carbon Nanotubes

Solid-state single-photon sources are essential building blocks for quantum photonics and quantum information technologies. This study demonstrates promising single-photon emission from quantum defects generated in single-wall carbon nanotubes (SWCNTs) by covalent reaction with guanine nucleotides in their single-stranded DNA coatings. Low-temperature photoluminescence spectroscopy and photon-correlation measurements on individual guanine-functionalized SWCNTs (GF-SWCNTs) indicate that multiple, closely spaced guanine defect sites within a single ssDNA strand collectively form an exciton trapping potential that supports a localized quantum state capable of room-temperature single-photon emission. In addition, exciton traps from adjacent ssDNA strands are weakly coupled to give cross-correlations between their separate photon emissions. Theoretical modeling identifies coupling mechanism as a capture of band-edge excitons. Because the spatial pattern of nanotube functionalization sites can be readily controlled by selecting ssDNA base sequences, GF-SWCNTs should become a versatile family of quantum light emitters with engineered properties.

Near-infrared nanoscopy with carbon-based nanoparticles for the exploration of the brain extracellular space

Understanding the physiology and pathology of the brain requires detailed knowledge of its complex structures as well as dynamic internal processes at very different scales from the macro down to the molecular dimensions. A major yet poorly described brain compartment is the brain extracellular space (ECS). Signalling molecules rapidly diffuse through the brain ECS which is complex and dynamic structure at numerous lengths and time scales. In recent years, characterization of the ECS using nanomaterials has made remarkable progress, including local analysis of nanoscopic dimensions and diffusivity as well as local chemical sensing. In particular, carbon nanomaterials combined with advanced optical technologies, biochemical and biophysical analysis, offer novel promises for understanding the ECS morphology as well as neuron connectivity and neurochemistry. In this review, we present the state-of-the-art in this quest, which mainly focuses on a type of carbon nanomaterial, single walled carbon nanotubes, as fluorescent nanoprobes to unveil the ECS features in the nanometre domain.

sp3-Functionalization of Single-Walled Carbon Nanotubes Creates Localized Spins

Chemical functionalization-introduced sp³ quantum defects in single-walled carbon nanotubes (SWCNTs) have shown compelling optical properties for their potential applications in quantum information science and bioimaging. Here, we utilize temperature- and power-dependent electron spin resonance measurements to study the fundamental spin properties of SWCNTs functionalized with well-controlled densities of sp³ quantum defects. Signatures of isolated spins that are highly localized at the sp³ defect sites are observed, which we further confirm with density functional theory calculations. Applying temperature-dependent line width analysis and power-saturation measurements, we estimate the spin-lattice relaxation time T₁ and spin dephasing time T₂ to be around 9 μs and 40 ns, respectively. These findings of the localized spin states that are associated with the sp³ quantum defects not only deepen our understanding of the molecular structures of the quantum defects but could also have strong implications for their applications in quantum information science.

Enhancing near-infrared photoluminescence from single-walled carbon nanotubes by defect-engineering using benzoyl peroxide

Single-walled carbon nanotubes (SWCNTs) have been modified with ester groups using typical organic radical chemistry. Consequently, traps for mobile excitons have been created, which enhanced the optical properties of the material. The proposed methodology combines the benefits of mainstream approaches to create luminescent defects in SWCNTs while it simultaneously avoids their limitations. A step change was achieved when the aqueous medium was abandoned. The selection of an appropriate organic solvent enabled much more facile modification of SWCNTs. The presented technique is quick and versatile as it can engage numerous reactants to tune the light emission capabilities of SWCNTs. Importantly, it can also utilize SWCNTs sorted by chirality using conjugated polymers to enhance their light emission capabilities. Such differentiation is conducted in organic solvents, so monochiral SWCNT can be directly functionalized using the demonstrated concept in the same medium without the need to redisperse the material in water.

Chirality-Enriched Carbon Nanotubes for Next-Generation Computing

For the past half century, silicon has served as the primary material platform for integrated circuit technology. However, the recent proliferation of nontraditional electronics, such as wearables, embedded systems, and low-power portable devices, has led to increasingly complex mechanical and electrical performance requirements. Among emerging electronic materials, single-walled carbon nanotubes (SWCNTs) are promising candidates for next-generation computing as a result of their superlative electrical, optical, and mechanical properties. Moreover, their chirality-dependent properties enable a wide range of emerging electronic applications including sub-10 nm complementary field-effect transistors, optoelectronic integrated circuits, and enantiomer-recognition sensors. Here, recent progress in SWCNT-based computing devices is reviewed, with an emphasis on the relationship between chirality enrichment and electronic functionality. In particular, after highlighting chirality-dependent SWCNT properties and chirality enrichment methods, the range of computing applications that have been demonstrated using chirality-enriched SWCNTs are summarized. By identifying remaining challenges and opportunities, this work provides a roadmap for next-generation SWCNT-based computing.

Carbon Nanotube Photoluminescence Modulation by Local Chemical and Supramolecular Chemical Functionalization

ConspectusCarbon nanotubes (CNTs) have been central materials in nanoscience and nanotechnologies. Single-walled CNTs (SWCNTs) consisting of a cylindrical graphene show a metallic (met) or semiconducting (sc) property depending on their rolling up manner (chirality). The sc-SWCNTs show characteristic chirality-dependent optical properties of their absorption and photoluminescence (PL) in the near-infrared (NIR) region. These are derived from their highly π-conjugated structures having semiconducting crystalline sp² carbon networks with defined nanoarchitectures that afford a strong quantum confinement and weak dielectric screening. Consequently, photoirradiation of the SWCNTs produces a stable and mobile exciton (excited electron-hole pair) even at room temperature, and the exciton properties dominate such optical phenomena in the SWCNTs. However, the mobile excitons decrease the PL efficiency due to nonradiative relaxation including collision with tube edges and relaxation to lower-lying dark states. A breakthrough regarding the efficient use of the mobile exciton for PL has recently been achieved by local chemical functionalization of the SWCNTs, in which the chemical reactions introduce local defects of oxygen and sp³ carbon atoms in the tube structures. The defect doping creates new emissive doped sites that have narrower band gaps and trap the mobile excitons, which provides locally functionalized SWCNTs (lf-SWCNTs). As a result, the localized exciton produces E₁₁* PL with red-shifted wavelengths and enhanced PL quantum yields compared to the original E₁₁ PL of the nonmodified SWCNTs.In this Account, we describe recently revealed fundamental properties of the lf-SWCNTs based on the analyses by photophysics, theoretical calculations, and electrochemistry combined with in situ PL spectroscopy. The new insight allows us to expand the wavelength regions of the NIR E₁₁* PL derived from the localized exciton, in which upconversion generates a higher energy PL through thermal activation and proximal doped site formation using bis-aryldiazonium modifiers provides a much lower energy PL than typical E₁₁* PL. Moreover, owing to the chemical reaction-dominant doping process, the molecular structure design of modifiers succeeds in producing functionalized lf-SWCNTs; namely, molecular functions are incorporated into the doped sites for their PL modulation. The wavelength changes/switching in the E₁₁* PL selectively occurs by a supramolecular approach using molecular recognition and imine chemistry. Therefore, the local chemical functionalization of the SWCNTs is a key to designing the properties and creating their new functions of the lf-SWCNTs. Fundamental understanding of the doped site properties of the lf-SWCNTs and molecularly driven approaches for exciton and defect engineering would unveil the intrinsic natures of these materials, which is crucial for elevating the SWCNT-based nanotechnologies to the next stage. The resulting materials are of interest in the fields of high performance NIR-II imaging and sensing for bio/medical analyses and single-photon emitters in quantum information technology.

Fluorescent sp3 Defect-Tailored Carbon Nanotubes Enable NIR-II Single Particle Imaging in Live Brain Slices at Ultra-Low Excitation Doses

Cellular and tissue imaging in the second near-infrared window (NIR-II, ~1000–1350 nm) is advantageous for in vivo studies because of low light extinction by biological constituents at these wavelengths. However, deep tissue imaging at the single molecule sensitivity has not been achieved in the NIR-II window due to lack of suitable bio-probes. Single-walled carbon nanotubes have emerged as promising near-infrared luminescent molecular bio-probes; yet, their inefficient photoluminescence (quantum yield ~1%) drives requirements for sizeable excitation doses (~1–10 kW/cm²) that are significantly blue-shifted from the NIR-II region (<850 nm) and may thus ultimately compromise live tissue. Here, we show that single nanotube imaging can be achieved in live brain tissue using ultralow excitation doses (~0.1 kW/cm²), an order of magnitude lower than those currently used. To accomplish this, we synthesized fluorescent sp³-defect tailored (6,5) carbon nanotubes which, when excited at their first order excitonic transition (~985 nm) fluoresce brightly at ~1160 nm. The biocompatibility of these functionalized nanotubes, which are wrapped by encapsulation agent (phospholipid-polyethylene glycol), is demonstrated using standard cytotoxicity assays. Single molecule photophysical studies of these biocompatible nanotubes allowed us to identify the optimal luminescence properties in the context of biological imaging.

Auger Suppression of Incandescence in Individual Suspended Carbon Nanotube pn-Junctions

There are various mechanisms of light emission in carbon nanotubes (CNTs), which give rise to a wide range of spectral characteristics that provide important information. Here we report suppression of incandescence via Auger recombination in suspended carbon nanotube pn-junctions generated from dual-gate CNT field-effect transistor (FET) devices. By applying equal and opposite voltages to the gate electrodes (i.e., V_g1 = -V_g2), we create a pn-junction within the CNT. Under these gating conditions, we observe a sharp peak in the incandescence intensity around zero applied gate voltage, where the intrinsic region has the largest spatial extent. Here, the emission occurs under high electrical power densities of around 0.1 MW/cm² (or 6 μW) and arises from thermal emission at elevated temperatures above 800 K (i.e., incandescence). It is somewhat surprising that this thermal emission intensity is so sensitive to the gating conditions, and we observe a 1000-fold suppression of light emission between V_g1 = 0 and 15 V, over a range in which the electrical power dissipated in the nanotube is roughly constant. This behavior is understood on the basis of Auger recombination, which suppresses light emission by the excitation of free carriers. Based on the calculated carrier density and band profiles, the length of the intrinsic region drops by a factor of 7-25× over the range from |V_g| = 0 to 15 V. We, therefore, conclude that the light emission intensity is significantly dependent on the free carrier density profile and the size of the intrinsic region in these CNT devices.

Ultrafast Exciton Trapping at sp3 Quantum Defects in Carbon Nanotubes

Semiconducting single-walled carbon nanotubes (SWCNTs) constitute an ideal platform for developing near-infrared biosensors, single photon sources, and nanolasers due to their distinct optical and electrical properties. Covalent doping of SWCNTs has recently been discovered as an efficient approach in enhancing their emission intensities. We perform pump-probe studies of SWCNTs that are covalently doped with sp³ quantum defects and reveal strikingly different exciton formation dynamics and decay mechanisms in the presence of the defect sites. We show that, in highly doped SWCNTs, ultrafast trapping of excitons at the defect sites can outpace other photodynamic processes and lead to ground-state photobleaching of the quantum defects. Our fitting of the transient data with a kinetic model also reveals an upper limit in the quantum defect density for obtaining highly luminescent SWCNTs without causing irreversible damage. These findings not only deepen our understanding of the photodynamics in covalently doped SWCNTs but also reveal critical information for the design of bright near-infrared emitters that can be utilized in biological, quantum information, and nanophotonic applications.

New Light on Molecule-Nanotube Hybrids

Optoelectronics benefits from outstanding new nanomaterials that provide emission and detection in the visible and near-infrared range, photoswitches, two level systems for single photon emission, etc. Among these, carbon nanotubes are envisioned as game changers despite difficult handling and control over chirality burdening their use. However, recent breakthroughs on hybrid carbon nanotubes have established nanotubes as pioneers for a new family of building blocks for optics and quantum optics. Functionalization of carbon nanotubes with molecules or polymers not only preserves the nanotube properties from the environment, but also promotes new performance abilities to the resulting hybrids. Photoluminescence and Raman signals are enhanced in the hybrids, which questions the nature of the electronic coupling between nanotube and molecules. Furthermore, coupling to optical cavities dramatically enhances single photon emission, which operates up to room temperature. This new light on nanotube hybrids shows their potential to push optoelectronics a step forward.

Exciton relaxation in carbon nanotubes via electronic-to-vibrational energy transfer

Covalent functionalization of semiconducting single-wall carbon nanotubes (CNTs) introduces new photoluminescent emitting states. These states are spatially localized around functionalization sites and strongly red-shifted relative to the emission commonly observed from the CNT band-edge exciton state. A particularly important feature of these localized exciton states is that because the exciton is no longer free to diffusively sample photoluminescent quenching sites along the CNT length, its lifetime is significantly extended. We have recently demonstrated that an important relaxation channel of such localized excitons is the electronic-to-vibrational energy transfer (EVET). This process is analogous to the Förster resonance energy transfer except the final state of this process is not electronically, but vibrationally excited molecules of the surrounding medium (e.g., solvent). In this work, we develop a theory of EVET for a nanostructure of arbitrary shape and apply it to the specific case of EVET-mediated relaxation of defect-localized excitons in a covalently functionalized CNT. The resulting EVET relaxation times are in good agreement with experimental data.

Photon Correlation Spectroscopy of Luminescent Quantum Defects in Carbon Nanotubes

Defect-decorated single-wall carbon nanotubes have shown rapid growing potential for imaging, sensing, and the development of room-temperature single-photon sources. The key to the highly nonclassical emission statistics is the discrete energy spectrum of defect-localized excitons. However, variations in defect configurations give rise to distinct spectral bands that may compromise single-photon efficiency and purity in practical devices, and experimentally it has been challenging to study the exciton population distribution among the various defect-specific states. Here, we performed photon correlation spectroscopy on hexyl-decorated single-wall carbon nanotubes to unravel the dynamics and competition between neutral and charged exciton populations. With autocorrelation measurements at the single-tube level, we prove the nonclassical photon emission statistics of defect-specific exciton and trion photoluminescence and identify their mutual exclusiveness in photoemissive events with cross-correlation spectroscopy. Moreover, our study reveals the presence of a dark state with population-shelving time scales between 10 and 100 ns. These new insights will guide further development of chemically tailored carbon nanotube states for quantum photonics applications.

Brightening of Long, Polymer-Wrapped Carbon Nanotubes by sp3 Functionalization in Organic Solvents

The functionalization of semiconducting single-walled carbon nanotubes (SWNTs) with sp3 defects that act as luminescent exciton traps is a powerful means to enhance their photoluminescence quantum yield (PLQY) and to add optical properties. However, the synthetic methods employed to introduce these defects are currently limited to aqueous dispersions of surfactant-coated SWNTs, often with short tube lengths, residual metallic nanotubes, and poor film-formation properties. In contrast to that, dispersions of polymer-wrapped SWNTs in organic solvents feature unrivaled purity, higher PLQY, and are easily processed into thin films for device applications. Here, we introduce a simple and scalable phase-transfer method to solubilize diazonium salts in organic nonhalogenated solvents for the controlled reaction with polymer-wrapped SWNTs to create luminescent aryl defects. Absolute PLQY measurements are applied to reliably quantify the defect-induced brightening. The optimization of defect density and trap depth results in PLQYs of up to 4% with 90% of photons emitted through the defect channel. We further reveal the strong impact of initial SWNT quality and length on the relative brightening by sp3 defects. The efficient and simple production of large quantities of defect-tailored polymer-sorted SWNTs enables aerosol-jet printing and spin-coating of thin films with bright and nearly reabsorption-free defect emission, which are desired for carbon nanotube-based near-infrared light-emitting devices.

Creating fluorescent quantum defects in carbon nanotubes using hypochlorite and light

Covalent doping of single-walled carbon nanotubes (SWCNTs) can modify their optical properties, enabling applications as single-photon emitters and bio-imaging agents. We report here a simple, quick, and controllable method for preparing oxygen-doped SWCNTs with desirable emission spectra. Aqueous nanotube dispersions are treated at room temperature with NaClO (bleach) and then UV-irradiated for less than one minute to achieve optimized O-doping. The doping efficiency is controlled by varying surfactant concentration and type, NaClO concentration, and irradiation dose. Photochemical action spectra indicate that doping involves reaction of SWCNT sidewalls with oxygen atoms formed by photolysis of ClO^- ions. Variance spectroscopy of products reveals that most individual nanotubes in optimally treated samples show both pristine and doped emission. A continuous flow reactor is described that allows efficient preparation of milligram quantities of O-doped SWCNTs. Finally, we demonstrate a bio-imaging application that gives high contrast short-wavelength infrared fluorescence images of vasculature and lymphatic structures in mice injected with only ~100 ng of the doped nanotubes.

Single-defect spectroscopy in the shortwave infrared

Chemical defects that fluoresce in the shortwave infrared open exciting opportunities in deep-penetration bioimaging, chemically specific sensing, and quantum technologies. However, the atomic size of defects and the high noise of infrared detectors have posed significant challenges to the studies of these unique emitters. Here we demonstrate high throughput single-defect spectroscopy in the shortwave infrared capable of quantitatively and spectrally resolving chemical defects at the single defect level. By cooling an InGaAs detector array down to -190 °C and implementing a nondestructive readout scheme, we are able to capture low light fluorescent events in the shortwave infrared with a signal-to-noise ratio improved by more than three orders-of-magnitude. As a demonstration, we show it is possible to resolve individual chemical defects in carbon nanotube semiconductors, simultaneously collecting a full spectrum for each defect within the entire field of view at the single defect limit.

Controlling the optical properties of carbon nanotubes with organic colour-centre quantum defects

Previously unwelcome, defects are emerging as a new frontier of research, providing a molecular focal point to study the coupling of electrons, excitons, phonons and spin in low-dimensional materials. This opportunity is particularly intriguing in semiconducting single-walled carbon nanotubes, in which covalently bonding organic functional groups to the sp 2 carbon lattice can produce tunable sp 3 quantum defects that fluoresce brightly in the shortwave IR, emitting pure single photons at room temperature. These novel physical properties have made such synthetic defects, or 'organic colour centres', exciting new systems for chemistry, physics, materials science, engineering and quantum technologies. This Review examines progress in this emerging field and presents a unified description of this new family of quantum emitters, as well as providing an outlook of the rapidly expanding research and applications of synthetic defects.

Intrinsic limits of defect-state photoluminescence dynamics in functionalized carbon nanotubes

Defect states introduced to single wall carbon nanotubes (SWCNTs) by covalent functionalization give rise to novel photophysics and are showing promise as sources of room-temperature quantum emission of interest for quantum information technologies. Evaluation of their ultimate potential for such needs requires a knowledge of intrinsic dynamic and coherence behaviors. Here we probe population relaxation and dephasing time (T1 and T2, respectively) of defect states following deposition of functionalized SWCNTs on polystyrene substrates that are subjected to an isopropanol rinse to remove surfactant. Low-temperature (4 K) photo-luminescence linewidths (∼100 μeV) following surfactant removal are a factor of ten narrower than those for unrinsed SWCNTs. Measured recombination lifetimes, on the order of 1.5 ns, compare well with those estimated from DFT calculations, indicating that the intrinsic radiatively-limited lifetime is approached following this sample treatment. Dephasing times evaluated directly through an interferometric approach compare closely to those established by photoluminescence linewidths. Dephasing times as high as 12 ps are found; a factor of up to 6 times greater than those evaluated for band-edge exciton states. Such enhancement of dephasing and photoluminescence lifetime behavior is a direct consequence of exciton localization at the SWCNT defect sites.

Photoluminescence Intensity Fluctuations and Temperature-Dependent Decay Dynamics of Individual Carbon Nanotube sp3 Defects

Recent demonstration of room temperature, telecommunication wavelength single photon generation by sp³ defects of single wall carbon nanotubes established these defects as a new class of quantum materials. However, their practical utilization in development of quantum light sources calls for a significant improvement in their imperfect quantum yield (QY∼10-30%). PL intensity fluctuations observed with some defects also need to be eliminated. Aiming toward attaining fundamental understanding necessary for addressing these critical issues, we investigate PL intensity fluctuation and PL decay dynamics of aryl sp³ defects of (6,5), (7,5), and (10,3) single wall carbon nanotubes (SWCNTs) at temperatures ranging from 300 to 4 K. By correlating defect-state PL intensity fluctuations with change (or lack of change) in PL decay dynamics, we identified random variations in the trapping efficiency of E₁₁ band-edge excitons (likely resulting from the existence of a fluctuating potential barrier in the vicinity of the defect) as the mechanism mainly responsible for the defect PL intensity fluctuations. Furthermore, by analyzing the temperature dependence of PL intensity and decay dynamics of individual defects based on a kinetic model involving the trapping and detrapping of excitons by optically allowed and forbidden (bright and dark) defect states, we estimate the height of the potential barrier to be in the 3-22 meV range. Our analysis also provides further confirmation of recent DFT simulation results that the emissive sp³ defect state is accompanied by an energetically higher-lying optically forbidden (dark) exciton state.

Characterization and Biodistribution Analysis of Oxygen-Doped Single-Walled Carbon Nanotubes Used as in Vivo Fluorescence Imaging Probes

Single-walled carbon nanotubes (SWCNTs) show strong fluorescence in the 1000-1700 nm second near-infrared (NIR-II) wavelength range and are considered promising candidates for angiographic imaging probes. Oxygen-doped SWCNTs coated with phospholipid-polyethylene glycol (o-SWCNT-PEG) show exceptional potential, as they emit fluorescence at ∼1300 nm through excitation with 980 nm light. Here, with the aim of putting o-SWCNTs to practical use as an angiographic agent in animal experiments, the retention time after intravenous administration in the vasculature of mice and the biodistribution were studied. To provide bio affinity, the o-SWCNTs were coated with phospholipid polyethylene glycol. The intravenously injected o-SWCNT-PEG circulated within the vasculature for 3 h and cleared within 1 day. There was prominent fluorescence and Raman signals from the SWCNTs in the liver and spleen early in the experiment; the signals remained for 1 month. No apparent abnormalities in weight or appearance were observed after 2 months, suggesting low toxicity of o-SWCNT-PEG. These characteristics of o-SWCNT-PEG would make it useful as an angiographic imaging probe in the NIR-II wavelength range.

Exciton Self-Trapping in sp2 Carbon Nanostructures Induced by Edge Ether Groups

Recent experiments have suggested that exciton self-trapping plays an important role in governing the optical properties of graphene quantum dots (GQDs) and carbon dots (CDs), while the molecular structures related to this phenomenon remain unclear. This theoretical study reports exciton self-trapping induced by edge-bonded ether (C-O-C) groups in graphene nanosheets. Density functional theory (DFT) and time-dependent DFT calculations show that the initially delocalized electron and hole are trapped in the vicinity of the edge ether groups on graphene nanosheets upon excited-state (S1) relaxation, accompanied by structural planarization of the seven-membered cyclic ether rings in the same region. The resulted significant structural deformation leads to large Stokes shift energies, which are comparable to the magnitudes of the notably large emission shift observed in experiments. This study provides a feasible explanation of the origin of exciton self-trapping and offers guidance for experiments to investigate and engineer exciton self-trapping in relevant materials.

Solvent- and Wavelength-Dependent Photoluminescence Relaxation Dynamics of Carbon Nanotube sp3 Defect States

Photoluminescent sp³ defect states introduced to single wall carbon nanotubes (SWCNTs) through low-level covalent functionalization create new photophysical behaviors and functionality as a result of defect sites acting as exciton traps. Evaluation of relaxation dynamics in varying dielectric environments can aid in advancing a more complete description of defect-state relaxation pathways and electronic structure. Here, we exploit helical wrapping polymers as a route to suspending (6,5) SWCNTs covalently functionalized with 4-methoxybenzene in solvent systems including H₂O, D₂O, methanol, dimethylformamide, tetrahydrofuran, and toluene, spanning a range of dielectric constants from 80 to 3. Defect-state photoluminescence decays were measured as a function of emission wavelength and solvent environment. Emission decays are biexponential, with short lifetime components on the order of 65 ps and long components ranging from around 100 to 350 ps. Both short and long decay components increase as emission wavelength increases, while only the long lifetime component shows a solvent dependence. We demonstrate that the wavelength dependence is a consequence of thermal detrapping of defect-state excitons to produce mobile E₁₁ excitons, providing an important mechanism for loss of defect-state population. Deeper trap states (i.e., those emitting at longer wavelengths) result in a decreased rate for thermal loss. The solvent-independent behavior of the short lifetime component is consistent with its assignment as the characteristic time for redistribution of exciton population between bright and dark defect states. The solvent dependence of the long lifetime component is shown to be consistent with relaxation via an electronic to vibrational energy transfer mechanism, in which energy is resonantly lost to solvent vibrations in a complementary mechanism to multiphonon decay processes.

Carbon nanotubes as emerging quantum-light sources

Progress in quantum computing and quantum cryptography requires efficient, electrically triggered, single-photon sources at room temperature in the telecom wavelengths. It has been long known that semiconducting single-wall carbon nanotubes (SWCNTs) display strong excitonic binding and emit light over a broad range of wavelengths, but their use has been hampered by a low quantum yield and a high sensitivity to spectral diffusion and blinking. In this Perspective, we discuss recent advances in the mastering of SWCNT optical properties by chemistry, electrical contacting and resonator coupling towards advancing their use as quantum light sources. We describe the latest results in terms of single-photon purity, generation efficiency and indistinguishability. Finally, we consider the main fundamental challenges stemming from the unique properties of SWCNTs and the most promising roads for SWCNT-based chip integrated quantum photonic sources.

Suppression of exciton dephasing in sidewall-functionalized carbon nanotubes embedded into metallo-dielectric antennas

Covalent functionalization of single-walled carbon nanotubes (SWCNTs) is a promising route to enhance the quantum yield of exciton emission and can lead to single-photon emission at room temperature. However, the spectral linewidth of the defect-related E11* emission remains rather broad. Here, we systematically investigate the low-temperature exciton emission of individual SWCNTs that have been dispersed with sodium-deoxycholate (DOC) and polyfluorene (PFO-BPy), are grown by laser vaporization (LV) or by CoMoCat techniques and are functionalized with oxygen as well as 3,5-dichlorobenzene groups. The E11 excitons in oxygen-functionalized SWCNTs remain rather broad with up to 10 meV linewidth while exciton emission from 3,5-dichlorobenzene functionalized SWCNTs is found to be about one order of magnitude narrower. In all cases, wrapping with PFO-BPy provides significantly better protection against pump induced dephasing compared to DOC. To further study the influence of exciton localization on pump-induced dephasing, we have embedded the functionalized SWCNTs into metallo-dielectric antenna cavities to maximize light collection. We show that 0D excitons attributed to the E11* emission of 3,5-dichlorobenzene quantum defects of LV-grown SWCNTs can display near resolution-limited linewidths down to 35 μeV. Interestingly, these 0D excitons give rise to a 3-fold suppressed pump-induced exciton dephasing compared to the E11 excitons in the same SWCNT. These findings provide a foundation to build a unified description of the emergence of novel optical behavior from the interplay of covalently introduced defects, dispersants, and exciton confinement in SWCNTs and might further lead to the realization of indistinguishable photons from carbon nanotubes.

Ultrashort Carbon Nanotubes That Fluoresce Brightly in the Near-Infrared

The intrinsic near-infrared photoluminescence observed in long single-walled carbon nanotubes is known to be quenched in ultrashort nanotubes due to their tiny size as compared to the exciton diffusion length in these materials (>100 nm). Here, we show that intense photoluminescence can be created in ultrashort nanotubes (∼40 nm length) upon incorporation of exciton-trapping sp³ defect sites. Using super-resolution photoluminescence imaging at <25 nm resolution, we directly show the preferential localization of excitons at the nanotube ends, which separate by less than 40 nm and behave as independent emitters. This unexpected observation opens the possibility to synthesize fluorescent ultrashort nanotubes-a goal that has been long thought impossible-for bioimaging applications, where bright near-infrared photoluminescence and small size are highly desirable, and for quantum information science, where high quality and well-controlled near-infrared single photon emitters are needed.

Correction Scheme for Comparison of Computed and Experimental Optical Transition Energies in Functionalized Single-Walled Carbon Nanotubes

Covalent functionalization of single-walled carbon nanotubes (SWCNTs) introduces red-shifted emission features in the near-infrared spectral range due to exciton localization around the defect site. Such chemical modifications increase their potential use as near-infrared emitters and single-photon sources in telecommunications applications. Density functional theory (DFT) studies using finite-length tube models have been used to calculate their optical transition energies. Predicted energies are typically blue-shifted compared to experiment due to methodology errors including imprecise self-interaction corrections in the density functional and finite-size basis sets. Furthermore, artificial quantum confinement in finite models cannot be corrected by a constant-energy shift since they depend on the degree of exciton localization. Herein, we present a method that corrects the emission energies predicted by time-dependent DFT. Confinement and methodology errors are separately estimated using experimental data for unmodified tubes. Corrected emission energies are in remarkable agreement with experiment, suggesting the value of this straightforward method toward predicting and interpreting the optical features of functionalized SWCNTs.

Oxygen-doped carbon nanotubes for near-infrared fluorescent labels and imaging probes

Chemical modification of carbon nanotube surface can controllably modulate their optical properties. Here we report a simple and effective synthesis method of oxygen-doped single-walled carbon nanotubes (o-SWCNTs), in which a thin film of SWCNTs is just irradiated under the UV light for a few minutes in air. By using this method, the epoxide-type oxygen-adducts (ep-SWCNTs) were produced in addition to the ether-type oxygen-adducts (eth-SWCNTs). The Treated (6, 5) ep-SWCNTs show a red-shifted luminescence at ~1280 nm, which corresponds to the most transparent regions for bio-materials. Immunoassay, fluorescence vascular angiography and observation of the intestinal contractile activity of mice were demonstrated by using the produced o-SWCNTs as infrared fluorescent labels and imaging agents.

Interplay of spectral diffusion and phonon-broadening in individual photo-emitters: the case of carbon nanotubes

At cryogenic temperatures, the photoluminescence (PL) spectrum of nano-emitters may still be significantly broadened due to interactions with the environment. The interplay of spectral diffusion (SD) and phonon broadening in this context is still a debated issue. Singlewall carbon nanotubes (SWNTs) are a particularly relevant system to address this topic as they show intense spectral diffusion and undergo a high exciton-phonon coupling due to their one-dimensional geometry. Here, we investigate the correlations between the spectral diffusion of the main line and that of the wings in SWNTs quantitatively and demonstrate that the photoluminescence spectrum undergoes spectral jumps as a whole, without distortions. This behavior suggests that the spectral shape of SWNT PL is defined by exciton-phonon interactions and that spectral diffusion results in an additional flat broadening. The methodology developed here can be used to investigate a broad range of non-Lorentzian emitters undergoing spectral diffusion.

Low-Temperature Single Carbon Nanotube Spectroscopy of sp3 Quantum Defects

Aiming to unravel the relationship between chemical configuration and electronic structure of sp³ defects of aryl-functionalized (6,5) single-walled carbon nanotubes (SWCNTs), we perform low-temperature single nanotube photoluminescence (PL) spectroscopy studies and correlate our observations with quantum chemistry simulations. We observe sharp emission peaks from individual defect sites that are spread over an extremely broad, 1000-1350 nm, spectral range. Our simulations allow us to attribute this spectral diversity to the occurrence of six chemically and energetically distinct defect states resulting from topological variation in the chemical binding configuration of the monovalent aryl groups. Both PL emission efficiency and spectral line width of the defect states are strongly influenced by the local dielectric environment. Wrapping the SWCNT with a polyfluorene polymer provides the best isolation from the environment and yields the brightest emission with near-resolution limited spectral line width of 270 μeV, as well as spectrally resolved emission wings associated with localized acoustic phonons. Pump-dependent studies further revealed that the defect states are capable of emitting single, sharp, isolated PL peaks over 3 orders of magnitude increase in pump power, a key characteristic of two-level systems and an important prerequisite for single-photon emission with high purity. These findings point to the tremendous potential of sp³ defects in development of room temperature quantum light sources capable of operating at telecommunication wavelengths as the emission of the defect states can readily be extended to this range via use of larger diameter SWCNTs.

Multi-exciton emission from solitary dopant states of carbon nanotubes

By separating the photons from slow and fast decays of single and multi-exciton states in a time gated 2^nd order photon correlation experiment, we show that solitary oxygen dopant states of single-walled carbon nanotubes (SWCNTs) allow emission of photon pairs with efficiencies as high as 44% of single exciton emission. Our pump dependent time resolved photoluminescence (PL) studies further reveal diffusion-limited exciton-exciton annihilation as the key process that limits the emission of multi-excitons at high pump fluences. We further postulate that creation of additional permanent exciton quenching sites occurring under intense laser irradiation leads to permanent PL quenching. With this work, we bring out multi-excitonic processes of solitary dopant states as a new area to be explored for potential applications in lasing and entangled photon generation.

Determination of Enantiomeric Purity of Single-Wall Carbon Nanotubes Using Flavin Mononucleotide

Although enantiomeric separation of single-wall carbon nanotubes is possible, their enantiomeric purity (EP) remains an issue due to a lack of effective evaluation methods. In this work, we report the EP of (6,5) carbon nanotube enantiomers using flavin mononucleotide (FMN) as an enantiomer-sensitive dispersant. The enantiomers (6,5) and (11,-5) were separated by a gel column chromatography method and dispersed in a FMN aqueous solution. In these solutions, (6,5) and (11,-5) showed E₁₁ optical transitions at different wavelengths due to handedness-dependent interactions with the FMN molecule, which enabled us to estimate each concentration, namely, the EP. We prepared six intermediate-purity enantiomer samples by mixing the (6,5) and (11,-5) enantiomers and measured their circular dichroism (CD) spectra. The CD signal was confirmed to change linearly with the EP. Using this relationship, we can estimate the EP of any mixture of (6,5) and (11,-5) from its CD intensity.