n-type colloidal semiconductor nanocrystals

In Situ Studies of Multi-Carrier Dynamics in Electrochemically-Charged Colloidal CdSe/CdS Core/Shell Quantum Dots

The application of semiconductor nanocrystals (NCs) in optoelectronic devices and photocatalysis inevitably involves them in charged states. The carrier and exciton dynamics of electrochemically charged NCs in solutions have yet to be reported. Herein, the electrochemical charging effects in colloidal CdSe/CdS core/shell quantum dots (QDs) are systematically investigated using static spectroelectrochemistry (SEC) and in situ transient absorption (TA) spectroscopy. Static SEC reveals the presence of in-gap trap states from 0.9 eV below the conduction band (CB) edge. Negligible changes in TA spectra and kinetics were observed from open circuit potential (OCP) to more anodic potentials within the QD band gap. At cathodic potentials, the negatively charged QDs show band edge trion decay with a lifetime of 690 ± 31 ps and slower 1P to 1S electron relaxation with time constants of 12.4 ± 0.8 ps assigned to the spin blockade effect and 316 ± 35 ps assigned to the phonon bottleneck effect. Our study reveals rich effects of charging on QD excited state under nearly native conditions.

Ionic liquid-assisted sustainable preparation of photo-catalytically active nanomaterials and their composites with 2D materials

The preparation of nanomaterials employing ionic liquids (ILs) and surface active ionic liquids (SAILs) in a relatively sustainable manner for different applications is reviewed. ILs offer structure directing and templating effects via inherent bi-continuous structures formed by the segregation of polar and non-polar domains. On the other hand, SAILs offer a structure-directing effect governed by their ability to lower the surface tension, self-assembling nature and interaction with precursors via ionic head groups. Binary mixtures of ILs with other relatively greener solvents or utilization of metal-based ILs (MILs), which act as precursors of metal ions, templates and stabilizing agents propose a new way to prepare a variety of nanomaterials. The introduction of SAILs that exfoliate 2D materials under low-energy bath sonication and also aid in photoreduction and stabilization of photocatalytically active nanomaterials at the surface of 2D materials poses a distinctive perspective in sustainable preparation and utilization of nanomaterials in different photocatalytic applications. The present feature article reviews the employment of distinctive properties of ILs in precise morphological control of nanomaterials, and their after-effects on their catalytic efficiencies.

Coordinated Anions Tune Z-Type Ligand Displacement from Colloidal CdSe and InP Nanocrystal Surfaces

Neutral metal salts coordinate to the surfaces of colloidal semiconductor nanocrystals (NCs) by acting as Lewis acid acceptors for the NC surface anions. This ligand coordination has been associated with increased emission due to the passivation of surface hole traps. Here, variation of the anionic ligands of metal salts is used to study anion effects on metal complex Lewis acidity and surface coordination at CdSe and InP NCs. To resolve dynamic ligand exchange processes, the tetracarbonylcobaltate anion, [Co(CO)4]-, is used as a monoanionic ligand for which IR spectroscopy can readily identify displacement of neutral M[Co(CO)4]x species (M = Cd or In; x = 2 or 3, respectively) upon addition of neutral donor ligands. Notably, although Cd[Co(CO)4]2 is more Lewis acidic than cadmium oleate, the former is more readily displaced from the NC surfaces. Lewis acidity and X-type anion exchange are, therefore, factors to be considered when performing postsynthetic addition of metal salts for NC photoluminescence emission enhancement.

Atomically precise surface chemistry of zirconium and hafnium metal oxo clusters beyond carboxylate ligands

The effectiveness of nanocrystals in many applications depends on their surface chemistry. Here, we leverage the atomically precise nature of zirconium and hafnium oxo clusters to gain fundamental insight into the thermodynamics of ligand binding. Through a combination of theoretical calculations and experimental spectroscopic techniques, we determine the interaction between the M6O8 8+ (M = Zr, Hf) cluster surface and various ligands: carboxylates, phosphonates, dialkylphosphinates, and monosubstituted phosphinates. We refute the common assumption that the adsorption energy of an adsorbate remains unaffected by the surrounding adsorbates. For example, dialkylphosphinic acids are too sterically hindered to yield complete ligand exchange, even though a single dialkylphosphinate has a high binding affinity. Monoalkyl or monoaryl phosphinic acids do replace carboxylates quantitatively and we obtained the crystal structure of M6O8H4(O2P(H)Ph)12 (M = Zr, Hf), giving insight into the binding mode of monosubstituted phosphinates. Phosphonic acids cause a partial structural reorganization of the metal oxo cluster into amorphous metal phosphonate as indicated by pair distribution function analysis. These results rationalize the absence of phosphonate-capped M6O8 clusters and the challenge in preparing Zr phosphonate metal-organic frameworks. We thus further reinforce the notion that monoalkylphosphinates are carboxylate mimics with superior binding affinity.

CdS Quantum Dot Gels as a Direct Hydrogen Atom Transfer Photocatalyst for C-H Activation

Here, we report CdS quantum dot (QD) gels, a three-dimensional network of interconnected CdS QDs, as a new type of direct hydrogen atom transfer (d-HAT) photocatalyst for C-H activation. We discovered that the photoexcited CdS QD gel could generate various neutral radicals, including α-amido, heterocyclic, acyl, and benzylic radicals, from their corresponding stable molecular substrates, including amides, thio/ethers, aldehydes, and benzylic compounds. Its C-H activation ability imparts a broad substrate and reaction scope. The mechanistic study reveals that this reactivity is intrinsic to CdS materials, and the neutral radical generation did not proceed via the conventional sequential electron transfer and proton transfer pathway. Instead, the C-H bonds are activated by the photoexcited CdS QD gel via a d-HAT mechanism. This d-HAT mechanism is supported by the linear correlation between the logarithm of the C-H bond activation rate constant and the C-H bond dissociation energy (BDE) with a Brønsted slope α=0.5. Our findings expand the currently limited direct hydrogen atom transfer photocatalysis toolbox and provide new possibilities for photocatalytic C-H activation.

Heavily Doped Carbon Nitride Nanocrystal Promotes Visible-Near-Infrared Photosynthesis of Hydrogen Peroxide with Near-Unit Photon Utilization

Direct photosynthesis of hydrogen peroxide (H2O2) from water and oxygen represents an intriguing alternative to the current indirect process involving the reduction and oxidation of quinones. However, limited light utilization and sluggish charge transfer largely impede overall photocatalytic efficiency. Herein, we present a heavily doped carbon nitride (CNKLi) nanocrystal for efficient and selective photoproduction of H2O2 via a two-electron oxygen reduction reaction (ORR) pathway. CNKLi induces metal-to-ligand charge transfer (MLCT) and electron trapping, which broadens the light absorption to the visible-near-infrared (vis-NIR) spectrum and prolongs the photoelectron lifetime to the microsecond time scale with an exceptional charge diffusion length of ∼1200 nm. Near-unit photoutilization with an apparent quantum yield (AQY) of 100% for H2O2 generation is achieved below 420 nm. Impressively, CNKLi exhibits an appreciable AQY of 16% at 700 nm, which reaches the absorption capacity (∼16%), thus suggesting a near-unit photon utilization <700 nm. In situ characterization and theoretical calculations reveal the facilitated charge transfer from K+ to the heptazine ring skeleton. These findings provide an approach to improve the photosynthetic efficiency of direct H2O2 preparation in the vis-NIR region and expand applications for driving kinetically slow and technologically desirable oxidations or high-value chemical generation.

The "energy gap law" for mid-infrared nanocrystals

Colloidal quantum dots are of increasing interest for mid-infrared detection and emission, but device performances will vastly benefit from reducing the non-radiative recombination. Empirically, the photoluminescence quantum yield decreases exponentially toward the mid-infrared, which appears similar to the energy gap law known for molecular fluorescence in the near-infrared. For molecules, the mechanism is electron-vibration coupling and fast internal vibrational relaxation. Here, we explore the possible mechanisms for inorganic quantum dots. The primary mechanism is assigned to an electric dipole near-field energy transfer from the quantum dot electronic transitions to the infrared absorption of surface organic ligands and then to the multiphonon absorption of the quantum dot inorganic core or the surrounding inorganic matrix. In order to obtain luminescent quantum dots in the 3-10 μm range, we motivate the importance of using inorganic matrices, which have a higher infrared transparency compared to organic materials. At longer wavelengths, inter-quantum dot energy transfer is noted to be much faster than radiative relaxation, indicating that bright mid-infrared colloidal quantum dot films might then benefit from dilution.

Fluctuations in the Photoluminescence Excitation Spectra of Individual Semiconductor Nanocrystals

Most single quantum emitters display non-steady emission properties. Models that explain this effect have primarily relied on photoluminescence measurements that reveal variations in intensity, wavelength, and excited-state lifetime. While photoluminescence excitation spectroscopy could provide complementary information, existing experimental methods cannot collect spectra before individual emitters change in intensity (blink) or wavelength (spectrally diffuse). Here, we present an experimental approach that circumvents such issues, allowing the collection of excitation spectra from individual emitters. Using rapid modulation of the excitation wavelength, we collect and classify excitation spectra from individual CdSe/CdS/ZnS core/shell/shell quantum dots. The spectra, along with simultaneous time-correlated single-photon counting, reveal two separate emission-reduction mechanisms caused by charging and trapping, respectively. During bright emission periods, we also observe a correlation between emission red-shifts and the increased oscillator strength of higher excited states. Quantum-mechanical modeling indicates that diffusion of charges in the vicinity of an emitter polarizes the exciton and transfers the oscillator strength to higher-energy transitions.

Reversible Ligand Detachment from CdSe Quantum Dots Following Photoexcitation

The nanocrystal-ligand boundaries of colloidal quantum dots (QDs) mediate charge and energy transfer processes that underpin photochemical and photocatalytic transformations at their surfaces. We used time-resolved infrared spectroscopy combined with transient electronic spectroscopy to probe vibrational modes of the carboxylate anchoring groups of stearate ligands attached to cadmium selenide (CdSe) QDs that were optically excited in solid nanocrystal films. The vibrational frequencies of surface-bonded carboxylate groups revealed their interactions with surface-localized holes in the excited states of the QDs. We also observed transient and reversible photoinduced ligand detachment from CdSe nanocrystals within their excited state lifetime. By probing both surface charge distributions and ligand dynamics on QDs in their excited states, we open a pathway to explore how the nanocrystal-ligand boundary can be understood and controlled for the design of QD architectures that most effectively drive charge transfer processes in solar energy harvesting and photoredox catalysis applications.

Enhancement of Optical Gain in Colloidal CdSe/CdS/ZnS Quantum Dots through Nanosecond Optical Pumping

Optical gain and lasing in colloidal nanocrystals are often hindered by sub-nanosecond rapid Auger non-radiative recombination, especially under continuous wave optical or electrical excitation. This study demonstrates amplified spontaneous emission (ASE) from CdSe/CdS/ZnS quantum dot (QD) solids through prolonged pulsed optical pumping over 10 ns. The incorporation of CdS and ZnS double shells on CdSe QDs effectively decelerates the Auger process in multiexcitonic states by extending the electron wave function and enhancing dielectric screening. Furthermore, we engineer smooth, densely packed QD solid films that efficiently guide the optical mode, achieving substantial net gain values under nanosecond pumping. The proposed approach helps observe ASE with gain thresholds of 0.84 and 1.5 mJ/cm2 under optical pumping pulse widths of 6 and 15 ns, respectively. This advancement can promote continuous pumping in colloidal QD gain systems, opening new avenues for optoelectronic applications.

Redox Chemistries for Vacancy Modulation in Plasmonic Copper Phosphide Nanocrystals

Copper phosphide (Cu3-xP) nanocrystals are promising materials for nanoplasmonics due to their substoichiometric composition, enabling the generation and stabilization of excess delocalized holes and leading to localized surface plasmon resonance (LSPR) absorption in the near-IR. We present three Cu-coupled redox chemistries that allow postsynthetic modulation of the delocalized hole concentrations and corresponding LSPR absorption in colloidal Cu3-xP nanocrystals. Changes in the structural, optical, and compositional properties are evaluated by powder X-ray diffraction, electronic absorption spectroscopy, 31P magic-angle spinning solid-state nuclear magnetic resonance spectroscopy, and elemental analysis. The redox chemistries presented herein can be used to access nanocrystals with LSPR energies of 660-890 meV, a larger range than has been possible through synthetic tuning alone. In addition to utilizing previously reported redox chemistries used for copper chalcogenide nanocrystals, we show that the largest structural and LSPR modulation is achieved using a divalent metal halide and trioctylphosphine. Specifically, nanocrystals treated with zinc iodide and trioctylphosphine have the smallest unit-cell volume (295.2 Å3) reported for P63cm Cu3-xP, indicating more Cu vacancies than have been previously observed. Overall, these redox chemistries present valuable insight into controlling the optical and structural properties of Cu3-xP.

Carbon dots and their interactions with recognition molecules for enhanced nucleic acid detection

Carbon Dots (C-dots) have exceptional fluorescence and incident wavelength alteration capabilities because of their π-π* electron transitions between the surface-trapped charges. They have clear, considerate and cost-effective applications in the domain of bio-sensing, optical imaging, medical diagnostics, fluorescence chemotherapy, forensics, and environmentology. Advances in the production process of C-dots can change their optical and chemical characteristics, allowing them to interact with a variety of chemicals and ions that can be exploited for the DNA detection in point-of-care devices. In the current scenario of pathogenic disease prevention, metagenomics and industrial processes, alternative genetic material identification is critical. This review focuses on the existing carbon dots-based DNA detection technologies and their interactions with other components such as metallic salts, dyes, and biological chemicals based on their surface charge distribution (positive or negative) employed in the DNA diagnostic devices and biosensors with their operating mechanism regarding their target component. These intriguing scientific discoveries and technologies will be extensively examined to translate them into real-world solutions which will have a significant societal and economic impact on overall well-being and innovation.

Guilty as Charged: The Role of Undercoordinated Indium in Electron-Charged Indium Phosphide Quantum Dots

Quantum dots (QDs) are known for their size-dependent optical properties, narrow emission bands, and high photoluminescence quantum yield (PLQY), which make them interesting candidates for optoelectronic applications. In particular, InP QDs are receiving a lot of attention since they are less toxic than other QD materials and are hence suitable for consumer applications. Most of these applications, such as LEDs, photovoltaics, and lasing, involve charging QDs with electrons and/or holes. However, charging of QDs is not easy nor innocent, and the effect of charging on the composition and properties of InP QDs is not yet well understood. This work provides theoretical insight into electron charging of the InP core and InP/ZnSe QDs. Density functional theory calculations are used to show that charging of InP-based QDs with electrons leads to the formation of trap states if the QD contains In atoms that are undercoordinated and thus have less than four bonds to neighboring atoms. InP core-only QDs have such atoms at the surface, which are responsible for the formation of trap states upon charging with electrons. We show that InP/ZnSe core-shell models with all In atoms fully coordinated can be charged with electrons without the formation of trap states. These results show that undercoordinated In atoms should be avoided at all times for QDs to be stably charged with electrons.

Characterizing the Semiconductor Nanocrystal Surface through Chemical Reactivity

ConspectusMany desirable and undesirable properties of semiconductor nanocrystals (NCs) can be traced to the NC surface due to the large surface-to-volume ratio. Therefore, precise control of the NC surface is imperative to achieve NCs with the desired qualities. Ligand-specific reactivity and surface heterogeneity make it difficult to accurately control and tune the NC surface. Without a molecular-level appreciation of the NC surface chemistry, modulating the NC surface is impossible and the risk of introducing deleterious surface defects is imminent. To gain a more comprehensive understanding of the surface reactivity, we have utilized a variety of spectroscopic techniques and analytical methods in concert.This Account describes our use of robust characterization techniques and ligand exchange reactions in effort to establish a molecular-level understanding of NC surface reactivity. The utility of NCs in target applications such as catalysis and charge transfer hangs on precise tunability of NC ligands. Modulating the NC surface requires the necessary tools to monitor chemical reactions. One commonly utilized analytical method to achieve targeted surface compositions is ¹H nuclear magnetic resonance (NMR) spectroscopy. Here we describe our use of ¹H NMR spectroscopy to monitor chemical reactions at CdSe and PbS NC surfaces to identify ligand specific reactivity. However, seemingly straightforward ligand exchange reactions can vary widely depending on the NC materials and anchoring group. Some non-native X-type ligands will irreversibly displace native ligands. Other ligands exist in equilibrium with native ligands. Depending on the application, it is important to understand the nature of exchange reactions. This level of understanding can be obtained by extracting exchange ratios, exchange equilibrium, and reaction mechanism information from ¹H NMR spectroscopy to establish precise NC reactivity.Reactivity that occurs through multiple, parallel ligand exchange mechanisms can involve both the liberation of metal-based Z-type ligands in addition to reactivity of X-type ligands. In these reactions, ¹H NMR spectroscopy fails to discern between an X-type oleate or a Z-type Pb(oleate)₂ because only the alkene resonance of the organic constituent is probed by this method. Multiple, parallel reaction pathways occur when thiol ligands are introduced to oleate-capped PbS NCs. This necessitated the use of synergistic characterization methods including ¹H NMR spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and inductively coupled plasma mass spectrometry (ICP-MS) to characterize both surface-bound and liberated ligands.Similar analytical methods have been employed to probe the NC topology, which is an important, but often overlooked, component to NC reactivity given the facet-specific reactivity of PbS NCs. Through the tandem use of NMR spectroscopy and ICP-MS, we have monitored the liberation of Pb(oleate)₂ as an L-type ligand is titrated to the NC to determine the quantity and equilibrium of Z-type ligands. By studying a variety of NC sizes, we correlated the number of liberated ligands with the size-dependent topology of PbS NCs.Lastly, we incorporate redox-active chemical probes into our toolbox to study NC surface defects. We describe how the site-specific reactivity and relative energetics of redox-active surface-based defects are elucidated using redox probes and show that this reactivity is highly dependent on the surface composition. This Account is designed to encourage readers to consider the necessary characterization techniques needed establish a molecular-level understanding of NC surfaces in their own work.

Remarkable Electrical Conductivity Increase and Pure Metallic Properties from Semiconducting Colloidal Nanocrystals by Cation Exchange for Solution-Processable Optoelectronic Applications

The authors report a strategic approach to achieve metallic properties from semiconducting CuFeS colloidal nanocrystal (NC) solids through cation exchange method. An unprecedentedly high electrical conductivity is realized by the efficient generation of charge carriers onto a semiconducting CuS NC template via minimal Fe exchange. An electrical conductivity exceeding 10 500 S cm^-1 (13 400 S cm^-1 at 2 K) and a sheet resistance of 17 Ω/sq at room temperature, which are among the highest values for solution-processable semiconducting NCs, are achieved successfully from bornite-phase CuFeS NC films possessing 10% Fe atom. The temperature dependence of the corresponding films exhibits pure metallic characteristics. Highly conducting NCs are demonstrated for a thermoelectric layer exhibiting a high power factor over 1.2 mW m^-1 K^-2 at room temperature, electrical wires for switching on light emitting diods (LEDs), and source-drain electrodes for p- and n-type organic field-effect transistors. Ambient stability, eco-friendly composition, and solution-processability further validate their sustainable and practical applicability. The present study provides a simple but very effective method for significantly increasing charge carrier concentrations in semiconducting colloidal NCs to achieve metallic properties, which is applicable to various optoelectronic devices.

Colloidal Approaches to Zinc Oxide Nanocrystals

Zinc oxide is an extensively studied semiconductor with a wide band gap in the near-UV. Its many interesting properties have found use in optics, electronics, catalysis, sensing, as well as biomedicine and microbiology. In the nanoscale regime the functional properties of ZnO can be precisely tuned by manipulating its size, shape, chemical composition (doping), and surface states. In this review, we focus on the colloidal synthesis of ZnO nanocrystals (NCs) and provide a critical analysis of the synthetic methods currently available for preparing ZnO colloids. First, we outline key thermodynamic considerations for the nucleation and growth of colloidal nanoparticles, including an analysis of different reaction methodologies and of the role of dopant ions on nanoparticle formation. We then comprehensively review and discuss the literature on ZnO NC systems, including reactions in polar solvents that traditionally occur at low temperatures upon addition of a base, and high temperature reactions in organic, nonpolar solvents. A specific section is dedicated to doped NCs, highlighting both synthetic aspects and structure-property relationships. The versatility of these methods to achieve morphological and compositional control in ZnO is explicated. We then showcase some of the key applications of ZnO NCs, both as suspended colloids and as deposited coatings on supporting substrates. Finally, a critical analysis of the current state of the art for ZnO colloidal NCs is presented along with existing challenges and future directions for the field.

Indium arsenide quantum dots: an alternative to lead-based infrared emitting nanomaterials

Colloidal quantum dots (QDs) emitting in the infrared (IR) are promising building blocks for numerous photonic, optoelectronic and biomedical applications owing to their low-cost solution-processability and tunable emission. Among them, lead- and mercury-based QDs are currently the most developed materials. Yet, due to toxicity issues, the scientific community is focusing on safer alternatives. In this regard, indium arsenide (InAs) QDs are one of the best candidates as they can absorb and emit light in the whole near infrared spectral range and they are RoHS-compliant, with recent trends suggesting that there is a renewed interest in this class of materials. This review focuses on colloidal InAs QDs and aims to provide an up-to-date overview spanning from their synthesis and surface chemistry to post-synthesis modifications. We provide a comprehensive overview from initial synthetic methods to the most recent developments on the ability to control the size, size distribution, electronic properties and carrier dynamics. Then, we describe doping and alloying strategies applied to InAs QDs as well as InAs based heterostructures. Furthermore, we present the state-of-the-art applications of InAs QDs, with a particular focus on bioimaging and field effect transistors. Finally, we discuss open challenges and future perspectives.

Chemical approaches for electronic doping in photovoltaic materials beyond crystalline silicon

Electronic doping is applied to tailor the electrical and optoelectronic properties of semiconductors, which have been widely adopted in information and clean energy technologies, like integrated circuit fabrication and PVs. Though this concept has prevailed in conventional PVs, it has achieved limited success in the new-generation PV materials, particularly in halide perovskites, owing to their soft lattice nature and self-compensation by intrinsic defects. In this review, we summarize the evolution of the theoretical understanding and strategies of electronic doping from Si-based photovoltaics to thin-film technologies, e.g., GaAs, CdTe and Cu(In,Ga)Se₂, and also cover the emerging PVs including halide perovskites and organic solar cells. We focus on the chemical approaches to electronic doping, emphasizing various chemical interactions/bonding throughout materials synthesis/modification to device fabrication/operation. Furthermore, we propose new classifications and models of electronic doping based on the physical and chemical properties of dopants, in the context of solid-state chemistry, which inspires further development of optoelectronics based on perovskites and other hybrid materials. Finally, we outline the effects of electronic doping in semiconducting materials and highlight the challenges that need to be overcome for reliable and controllable doping.

Deep-UV laser direct writing of photoluminescent ZnO submicron patterns: an example of nanoarchitectonics concept

Micro- and nanopatterning of metal oxide materials is an important process to develop electronic or optoelectronic devices. ZnO is a material of choice for its semiconducting and photoluminescence properties. In the frame of the nanoarchitectonics concept, we have developed and investigated a new process that relies on direct writing laser patterning in the Deep-UV (DUV) range to prepare photoluminescent microstructures of ZnO at room temperature, under air. This process is based on a synthesis of colloidal ZnO nanocrystals (NCs) with a careful choice of the ligands on the surface to obtain an optimal (i) stability of the colloids, (ii) redissolution of the non-insolated parts and (iii) cross-linking of the DUV-insolated parts. The mechanisms of photocrosslinking are studied by different spectroscopic methods. This room temperature process preserves the photoluminescence properties of the NCs and the wavelength used in DUV allows to reach a sub-micrometer resolution, which opens new perspectives for the integration of microstructures on flexible substrates for optoelectronic applications.

Mid-Infrared Intraband Photodetector via High Carrier Mobility HgSe Colloidal Quantum Dots

In this work, a room-temperature mixed-phase ligand exchange method is developed to obtain a relatively high carrier mobility (∼1 cm²/(V s)) on HgSe intraband colloidal quantum dot solids without any observable trap state. What is more, the doping from 1S_e to 1P_e state in the conduction band could be precisely controlled by additional salts during this method, proved by optical and transport experiments. The high mobility and controllable doping benefit the mid-infrared photodetector utilizing the 1S_e to 1P_e transition, with a 1000-fold improvement in response speed, which is several μs, a 55-fold increase in responsivity, which is 77 mA/W, and a 10-fold increase in specific detectivity, which is above 1.7 × 10⁹ Jones at 80 K. The high-performance photodetector could serve as an intraband infrared camera for thermal imaging, as well as a CO₂ gas sensor with a range from 0.25 to 2000 ppm.

Intraband Transitions of Nanocrystals Transforming from Lead Selenide to Self-doped Silver Selenide Quantum Dots by Cation Exchange

In search of heavy metal-free mid-IR active colloidal materials, self-doped silver selenide colloidal quantum dots (CQDs) can be an alternative offering tunable mid-IR wavelength with a narrow bandwidth. One of the challenges in the study of the intraband transition is developing a method to widen the intraband transition energy range as well as reducing the toxicity of the materials. Here, we present Ag_xSe (x > 2) CQDs exhibiting an intraband transition up to 0.39 eV, produced by the cation exchange (CE) method from PbSe CQDs. The major electronic transition efficiently changes from the SWIR band gap of PbSe CQDs to the mid-IR intraband transition of the Ag_xSe CQDs by the CE. The intraband exciton is verified by examining the absorption and emission of the CE Ag_xSe CQDs as well as their applications on electrochemical mid-IR luminescence and mid-IR intraband photodetectors.

CdS Quantum Dots as Potent Photoreductants for Organic Chemistry Enabled by Auger Processes

Strong reducing agents (<-2.0 V vs saturated calomel electrode (SCE)) enable a wide array of useful organic chemistry, but suffer from a variety of limitations. Stoichiometric metallic reductants such as alkali metals and SmI₂ are commonly employed for these reactions; however, considerations including expense, ease of use, safety, and waste generation limit the practicality of these methods. Recent approaches utilizing energy from multiple photons or electron-primed photoredox catalysis have accessed reduction potentials equivalent to Li⁰ and shown how this enables selective transformations of aryl chlorides via aryl radicals. However, in some cases, low stability of catalytic intermediates can limit turnover numbers. Herein, we report the ability of CdS nanocrystal quantum dots (QDs) to function as strong photoreductants and present evidence that a highly reducing electron is generated from two consecutive photoexcitations of CdS QDs with intermediate reductive quenching. Mechanistic experiments suggest that Auger recombination, a photophysical phenomenon known to occur in photoexcited anionic QDs, generates transient thermally excited electrons to enable the observed reductions. Using blue light-emitting diodes (LEDs) and sacrificial amine reductants, aryl chlorides and phosphate esters with reduction potentials up to -3.4 V vs SCE are photoreductively cleaved to afford hydrodefunctionalized or functionalized products. In contrast to small-molecule catalysts, QDs are stable under these conditions and turnover numbers up to 47 500 have been achieved. These conditions can also effect other challenging reductions, such as tosylate protecting group removal from amines, debenzylation of benzyl-protected alcohols, and reductive ring opening of cyclopropane carboxylic acid derivatives.

Permanent Electrochemical Doping of Quantum Dot Films through Photopolymerization of Electrolyte Ions

Quantum dots (QDs) are considered for devices like light-emitting diodes (LEDs) and photodetectors as a result of their tunable optoelectronic properties. To utilize the full potential of QDs for optoelectronic applications, control over the charge carrier density is vital. However, controlled electronic doping of these materials has remained a long-standing challenge, thus slowing their integration into optoelectronic devices. Electrochemical doping offers a way to precisely and controllably tune the charge carrier concentration as a function of applied potential and thus the doping levels in QDs. However, the injected charges are typically not stable after disconnecting the external voltage source because of electrochemical side reactions with impurities or with the surfaces of the QDs. Here, we use photopolymerization to covalently bind polymerizable electrolyte ions to polymerizable solvent molecules after electrochemical charge injection. We discuss the importance of using polymerizable dopant ions as compared to nonpolymerizable conventional electrolyte ions such as LiClO₄ when used in electrochemical doping. The results show that the stability of charge carriers in QD films can be enhanced by many orders of magnitude, from minutes to several weeks, after photochemical ion fixation. We anticipate that this novel way of stable doping of QDs will pave the way for new opportunities and potential uses in future QD electronic devices.

Doping Colloidal Quantum Dot Materials and Devices for Photovoltaics

Colloidal semiconductor nanocrystals have generated tremendous interest because of their solution processability and robust tunability. Among such nanocrystals, the colloidal quantum dot (CQD) draws the most attention for its well-known quantum size effects. In the last decade, applications of CQDs have been booming in electronics and optoelectronics, especially in photovoltaics. Electronically doped semiconductors are critical in the fabrication of solar cells, because carefully designed band structures are able to promote efficient charge extraction. Unlike conventional semiconductors, diffusion and ion implantation technologies are not suitable for doping CQDs. Therefore, researchers have creatively developed alternative doping methods for CQD materials and devices. In order to provide a state-of-the-art summary and comprehensive understanding to this research community, we focused on various doping techniques and their applications for photovoltaics and demystify them from different perspectives. By analyzing two classes of CQDs, lead chalcogenide CQDs and perovskite CQDs, we compared different working scenarios of each technique, summarized the development in this field, and raised our own future perspectives.

Intraband Transition and Localized Surface Plasmon Resonance of Metal Chalcogenides Nanocrystals and their Dependence on Crystal Structure

Understanding the localized surface plasmon resonance (LSPR) and the intraband transition of semiconductor nanocrystals (NCs) has attracted considerable attention since it can provide the opportunity to investigate the boundary between...

Colloidal n-Doped CdSe and CdSe/ZnS Nanoplatelets

Colloidal semiconductor nanoplatelets (NPLs) are chemical versions of well-studied quantum wells (QWs). For QWs, gating and carrier doping are standard tools to manipulate their optical, electric, or magnetic properties. It would be highly desirable to use pure chemical methods to dope extra charge carriers into free-standing colloidal NPLs to achieve a similar level of manipulation. Here we report colloidal n-doped CdSe and CdSe/ZnS NPLs achieved through a photochemical doping method. The extra electrons doped into the conduction band edges are evidenced by exciton absorption bleaches recoverable through dedoping and the appearance of new intersub-band transitions in the near-infrared. A high surface ligand coverage is the key to successful doping; otherwise, the doped electrons can be depleted likely by unpassivated surface cations. Large trion binding energies of 20-30 meV are found for the n-doped CdSe NPLs, which, in contrast, are reduced by 1 order of magnitude in CdSe/ZnS core/shell NPLs due to dielectric screening. Furthermore, we identify a long-lived negative trion with a lifetime of 1.5-1.6 ns that is likely dominated by radiative recombination.

Toward Bright Mid-Infrared Emitters: Thick-Shell n-Type HgSe/CdS Nanocrystals

A procedure is developed for the growth of thick, conformal CdS shells that preserve the optical properties of 5 nm HgSe cores. The n-doping of the HgSe/CdS core/shell particles is quantitatively tuned through a simple postsynthetic Cd treatment, while the doping is monitored via the intraband optical absorption at 5 μm wavelength. Photoluminescence lifetime and quantum yield measurements show that the CdS shell greatly increases the intraband emission intensity. This indicates that decoupling the excitation from the environment reduces the nonradiative recombination. We find that weakly n-type HgSe/CdS are the brightest solution-phase mid-infrared chromophores reported to date at room temperature, achieving intraband photoluminescence quantum yields of 2%. Such photoluminescence corresponds to intraband lifetimes in excess of 10 ns, raising important questions about the fundamental limits to achievable slow intraband relaxation in quantum dots.

Water Effects on Colloidal Semiconductor Nanocrystals: Correlation of Photophysics and Photochemistry

With high-quality CdSe/CdS core/shell nanocrystals as the main model system and under a controlled atmosphere, responses of photoexcited semiconductor nanocrystals to two active species (water and/or oxygen) in an ambient environment are studied systematically. Under photoexcitation, although high-quality semiconductor nanocrystals in either thin solid films or various solutions have a near-unity photoluminescence quantum yield, there is still a small probability (∼10^-5 per photon absorbed) to be photoreduced by the water molecules efficiently accumulated in the highly hydrophilic nanocrystal-ligands interface. The resulting negatively charged nanocrystals are the starting point of most photophysical variations, and the hydroxyl radical─key photo-oxidation product of water─plays the main role for initiating various photochemical processes. Depending on the supplementation of water to the interface, accessibility to oxygen, photoirradiation power, type of matrices, type of measurement schemes, and solubility of nanocrystals in the solution, various photophysical/photochemical phenomena─either reported or not reported in the literature─are reproducibly observed. Results confirm that photophysical properties and photochemical reactions can be well-correlated, offering a unified and unique basis for fundamental studies and the design of processing techniques in industry.

Mechanistic insights into defect chemistry and tailored photoluminescence and photocatalytic properties of aliovalent cation substituted Zn0.94M0.06-xLixO (M: Fe3+, Al3+, Cr3+) nanoparticles

In this work, we demonstrate the microwave assisted solution combustion synthesis of aliovalent cation substituted Zn_0.94M_0.06-xLi_xO (M: Fe³⁺, Al³⁺, Cr³⁺) nanoparticles. The structural features, photoluminescence and photocatalytic properties were characterized by X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and UV-visible and photoluminescence (PL) techniques. We have introduced aliovalent cations such as reducible Fe³⁺, stable Al³⁺ and oxidisable Cr³⁺ ions into ZnO and investigated its structural and optical properties. The charge balance and defect stoichiometric composition of ZnO were also studied by co-doping with Li⁺ ions. By understanding the photoluminescence and photocatalytic activity of doped and co-doped ZnO nanoparticles, the defect chemistry of ZnO is explained in detail. The photocatalytic efficiency of various doped and co-doped ZnO catalysts was compared with respect to the degradation of rhodamine B dye. Among them, the CZO, AZO and L3AZO catalysts showed enhanced photo-degradation efficiencies of 98.1%, 97.6% and 96.6%, respectively, which are high as compared to that of ZnO (89%). This work presents a novel and straightforward, low-cost, tunable and scalable fabrication protocol for highly efficient ZnO-based photocatalysts for practical applications.

Tunable Band-Edge Potentials and Charge Storage in Colloidal Tin-Doped Indium Oxide (ITO) Nanocrystals

Degenerately doped metal-oxide nanocrystals (NCs) show localized surface plasmon resonances (LSPRs) that are tunable via their tunable excess charge-carrier densities. Modulation of excess charge carriers has also been used to control magnetism in colloidal doped metal-oxide NCs. The addition of excess delocalized conduction-band (CB) electrons can be achieved through aliovalent doping or by postsynthetic techniques such as electrochemistry or photodoping. Here, we examine the influence of charge-compensating aliovalent dopants on the potentials of excess CB electrons in free-standing colloidal degenerately doped oxide NCs, both experimentally and through modeling. Taking Sn⁴⁺:In₂O₃ (ITO) NCs as a model system, we use spectroelectrochemical techniques to examine differences between aliovalent doping and photodoping. We demonstrate that whereas photodoping introduces excess CB electrons by raising the Fermi level relative to the CB edge, aliovalent impurity substitution introduces excess CB electrons by stabilizing the CB edge relative to an externally defined Fermi level. Significant differences are thus observed electrochemically between spectroscopically similar delocalized CB electrons compensated by aliovalent dopants and those compensated by surface cations (e.g., protons) during photodoping. Theoretical modeling illustrates the very different potentials that arise from charge compensation via aliovalent substitution and surface charge compensation. Spectroelectrochemical titrations allow the ITO NC band-edge stabilization as a function of Sn⁴⁺ doping to be quantified. Extremely large capacitances are observed in both In₂O₃ and ITO NCs, making these NCs attractive for reversible charge-storage applications.

Metal-Carbonyl-Functionalized CdSe Nanocrystals: Synthesis, Surface Redox, and Infrared Intensities

Characterizing the surfaces of colloidal semiconductor nanocrystals (NCs) remains a key challenge for understanding and controlling their physical properties and chemical behavior. For this reason, the development of new methods to study NC surfaces is of great interest. In this paper, we report the use of (Me₃Si)₂Fe(CO)₄ and Et₃SiCo(CO)₄ as reagents for functionalizing CdSe NC surfaces with organometallic metal tetracarbonyl fragments. This method avoids NC surface reduction and can achieve high metal carbonyl surface densities. Surface reduction or oxidation, as well as changes to the surface stoichiometry, was shown to shift the metal carbonyl CO stretching frequencies, making these surface-bound metal carbonyl fragments useful spectroscopic reporters of NC surface chemistry. Normal coordinate analysis was used on the metal carbonyl CO stretching vibrations to study the electronic influence of the CdSe NCs on the transition-metal center of the metal carbonyl fragments. These studies demonstrate the utility of organometallic spectroscopic reporters in studying the surface chemistry of NCs.

Nanoparticle O-H Bond Dissociation Free Energies from Equilibrium Measurements of Cerium Oxide Colloids

A novel equilibrium strategy for measuring the hydrogen atom affinity of colloidal metal oxide nanoparticles is presented. Reactions between oleate-capped cerium oxide nanoparticle colloids (nanoceria) and organic proton-coupled electron transfer (PCET) reagents are used as a model system. Nanoceria redox changes, or hydrogen loadings, and overall reaction stoichiometries were followed by both ¹H NMR and X-ray absorption near-edge spectroscopies. These investigations revealed that, in many cases, reactions between nanoceria and PCET reagents reach equilibrium states with good mass balance. Each equilibrium state is a direct measure of the bond strength, or bond dissociation free energy (BDFE), between nanoceria and hydrogen. Further studies, including those with larger nanoceria, indicated that the relevant bond is a surface O-H. Thus, we have measured surface O-H BDFEs for nanoceria-the first experimental BDFEs for any nanoscale metal oxide. Remarkably, the measured CeO-H BDFEs span 13 kcal mol^-1 (0.56 eV) with changes in the average redox state of the nanoceria colloid. Possible chemical models for this strong dependence are discussed. We propose that the tunability of ceria BDFEs may be important in explaining its effectiveness in catalysis. More generally, metal oxide BDFEs have been used as predictors of catalyst efficacy that, traditionally, have only been accessible by computational methods. These results provide important experimental benchmarks for metal oxide BDFEs and demonstrate that the concepts of molecular bond strength thermochemistry can be applied to nanoscale materials.

Quantitative Electrochemical Control over Optical Gain in Quantum-Dot Solids

Solution-processed quantum dot (QD) lasers are one of the holy grails of nanoscience. They are not yet commercialized because the lasing threshold is too high: one needs >1 exciton per QD, which is difficult to achieve because of fast nonradiative Auger recombination. The threshold can, however, be reduced by electronic doping of the QDs, which decreases the absorption near the band-edge, such that the stimulated emission (SE) can easily outcompete absorption. Here, we show that by electrochemically doping films of CdSe/CdS/ZnS QDs, we achieve quantitative control over the gain threshold. We obtain stable and reversible doping of more than two electrons per QD. We quantify the gain threshold and the charge carrier dynamics using ultrafast spectroelectrochemistry and achieve quantitative agreement between experiments and theory, including a vanishingly low gain threshold for doubly doped QDs. Over a range of wavelengths with appreciable gain coefficients, the gain thresholds reach record-low values of ∼1 × 10-5 excitons per QD. These results demonstrate a high level of control over the gain threshold in doped QD solids, opening a new route for the creation of cheap, solution-processable, low-threshold QD lasers.

Molecular-Level Insight into Semiconductor Nanocrystal Surfaces

Semiconductor nanocrystals exhibit attractive photophysical properties for use in a variety of applications. Advancing the efficiency of nanocrystal-based devices requires a deep understanding of the physical defects and electronic states that trap charge carriers. Many of these states reside at the nanocrystal surface, which acts as an interface between the semiconductor lattice and the molecular capping ligands. While a detailed structural and electronic understanding of the surface is required to optimize nanocrystal properties, these materials are at a technical disadvantage: unlike molecular structures, semiconductor nanocrystals lack a specific chemical formula and generally must be characterized as heterogeneous ensembles. Therefore, in order for the field to improve current nanocrystal-based technologies, a creative approach to gaining a "molecular-level" picture of nanocrystal surfaces is required. To this end, an expansive toolbox of experimental and computational techniques has emerged in recent years. In this Perspective, we critically evaluate the insight into surface structure and reactivity that can be gained from each of these techniques and demonstrate how their strategic combination is already advancing our molecular-level understanding of nanocrystal surface chemistry.

Reversible Electron Doping of Layered Metal Hydroxide Nanoplates (M = Co, Ni) Using n-Butyllithium

Ambipolar doping of metal oxides is critical toward broadening the functionality of semiconducting oxides in electronic devices. Most metal oxides, however, show a strong preference for a single doping polarity due to the intrinsic stability of particular defects in an oxide lattice. In this work, we demonstrate that layered metal hydroxide nanomaterials of Co and Ni, which are intrinsically p-doped in their anhydrous rock salt form, can be n-doped using n-BuLi as a strong electron donor. A combination of X-ray characterization techniques reveal that hydroxide vacancy formation, Li⁺ adsorption, and varying degrees of electron delocalization are responsible for the stability of injected electrons. The doped electrons induce conductivity increases of 4-6 orders of magnitude relative to the undoped M(OH)₂. We anticipate that chemical electron doping of layered metal hydroxides may be a general strategy to increase carrier concentration and stability for n-doping of intrinsically p-type metal oxides.

Two-Electron-Two-Proton Transfer from Colloidal ZnO and TiO2 Nanoparticles to Molecular Substrates

Transfers of multiple electrons and protons are challenging yet central to many energy-conversion processes and other chemical and biochemical reactions. Semiconducting oxides can hold multiple redox equivalents. This study describes the 2e^-/2H⁺ transfer reactivity of photoreduced ZnO and TiO₂ nanoparticle (NP) colloids with molecular 2e^-/2H⁺ acceptors, to form new O-H, N-H, and C-H bonds. The reaction stoichiometries were monitored by NMR and optical spectroscopies. Faster 2e^-/2H⁺ transfer rates were observed for substrates forming O-H or N-H bonds, presumably due to initial hydrogen bonding at the oxide surface. Chemically reduced ZnO NPs stabilized by Na⁺ or Ca²⁺ also engage in 2e^-/2H⁺ transfer reactivity, showing that protons transferred in these processes are inherent to the oxide nanoparticles and do not exclusively stem from photoreduction. These results highlight the potential of ZnO and TiO₂ for multiple proton-coupled electron transfer (PCET) reactions.

Single-Exciton Gain and Stimulated Emission Across the Infrared Telecom Band from Robust Heavily Doped PbS Colloidal Quantum Dots

Materials with optical gain in the infrared are of paramount importance for optical communications, medical diagnostics, and silicon photonics. The current technology is based either on costly III-V semiconductors that are not monolithic to silicon CMOS technology or Er-doped fiber technology that does not make use of the full fiber transparency window. Colloidal quantum dots (CQDs) offer a unique opportunity as an optical gain medium in view of their tunable bandgap, solution processability, and CMOS compatibility. The 8-fold degeneracy of infrared CQDs based on Pb-chalcogenides has hindered the demonstration of low-threshold optical gain and lasing, at room temperature. We demonstrate room-temperature, infrared, size-tunable, band-edge stimulated emission with a line width of ∼14 meV. Leveraging robust electronic doping and charge-exciton interactions in PbS CQD thin films, we reach a gain threshold at the single exciton regime representing a 4-fold reduction from the theoretical limit of an 8-fold degenerate system, with a net modal gain in excess of 100 cm^-1.

n-Doping of Quantum Dots by Lithium Ion Intercalation

The optical properties of colloidal quantum dots (QDs) are controllable through introduction of excess electrons or holes into their delocalized bands. Crucial to robust and energy-efficient electronic doping of QDs is suitable charge compensation. Compensation by surface modification and substitutional impurities are however not sufficiently controllable to enable effective doping of QDs. This article describes electrochemical n-type doping of CdSe QDs where injected electrons are compensated by interstitial Li⁺ to form Li_xCdSe, x ≤ 0.3. n-type degenerate doping reversibly decreases absorption into the lowest-energy excitonic state of the QD, activates intraband optical transitions, and shifts the photoluminescence of the QD to higher energy. This work establishes electrochemical interstitial doping as a reversible and highly controllable method for tuning the optical properties of colloidal QDs.

Size- and Temperature-Dependent Intraband Optical Properties of Heavily n-Doped PbS Colloidal Quantum Dot Solid-State Films

Steady-state access to intraband transitions in colloidal quantum dots (CQDs), via doping, permits exploitation of the electromagnetic spectrum at energies below the band gap. CQD intraband optoelectronics allows envisaging cheap mid- and long-wavelength infrared photodetectors and light-emitting devices, which today employ epitaxial materials. As intraband devices start to emerge, thorough studies of the basic properties of intraband transitions in different CQD materials are needed to guide technological research. In this work, we investigate the size and temperature dependence of the intraband transition in heavily n-doped PbS quantum dot (QD) films. In the studied QD size range (5-8 nm), the intraband energy spans from 209 to 151 meV. We measure the intraband absorption coefficient of heavily doped PbS QD films to be around 2 × 10⁴ cm^-1, proving that intraband absorption is as strong as interband absorption. We demonstrate a negative dependence of the intraband energy with temperature, in contrast to the positive dependence of the interband transition. Also opposite to the interband case, the temperature dependence of the intraband energy increases with decreasing size, going from -29 μeV/K to -49 μeV/K in the studied size range.

When Like Destabilizes Like: Inverted Solvent Effects in Apolar Nanoparticle Dispersions

We report on the colloidal stability of nanoparticles with alkanethiol shells in apolar solvents. Small-angle X-ray scattering and molecular dynamics simulations were used to characterize the interaction between nanoparticles in linear alkane solvents ranging from hexane to hexadecane, including 4 nm gold cores with hexadecanethiol shells and 6 nm cadmium selenide cores with octadecanethiol shells. We find that the agglomeration is enthalpically driven and that, contrary to what one would expect from classical colloid theory, the temperature at which the particles agglomerate increases with increasing solvent chain length. We demonstrate that the inverted trend correlates with the temperatures at which the ligands order in the different solvents and show that the inversion is due to a combination of enthalpic and entropic effects that enhance the stability of the ordered ligand state as the solvent length increases. We also explain why cyclohexane is a better solvent than hexadecane despite the two having very similar solvation parameters.

In-situ resonant band engineering of solution-processed semiconductors generates high performance n-type thermoelectric nano-inks

Thermoelectric devices possess enormous potential to reshape the global energy landscape by converting waste heat into electricity, yet their commercial implementation has been limited by their high cost to output power ratio. No single “champion” thermoelectric material exists due to a broad range of material-dependent thermal and electrical property optimization challenges. While the advent of nanostructuring provided a general design paradigm for reducing material thermal conductivities, there exists no analogous strategy for homogeneous, precise doping of materials. Here, we demonstrate a nanoscale interface-engineering approach that harnesses the large chemically accessible surface areas of nanomaterials to yield massive, finely-controlled, and stable changes in the Seebeck coefficient, switching a poor nonconventional p-type thermoelectric material, tellurium, into a robust n-type material exhibiting stable properties over months of testing. These remodeled, n-type nanowires display extremely high power factors (~500 µW m⁻¹K⁻²) that are orders of magnitude higher than their bulk p-type counterparts.

The design of solution-processed thermoelectric nanomaterials with efficient, stable performance remains a challenge. Here, the authors report an in-situ doping method based on nanoscale interface engineering to realize n-type thermoelectric nanowires with high performance and stability.

Complementary Oligonucleotide Conjugated Multicolor Carbon Dots for Intracellular Recognition of Biological Events

By using complementary DNA sequences as surface ligands, we selectively allow two individual diffusing "dual-color" carbon dots to interact in situ and in vitro. Spontaneous nanoscale oxidation of surface-abundant nitroso-/nitro-functionalities leads to two distinctly colored carbon dots (CD) which are isolated by polarity driven chromatographic separation. Green- and red-emitting carbon dots (gCD and rCD) were decorated by complementary single-stranded DNAs which produce a marked increase in the fluorescence emission of the respective carbon dots. Mutual colloidal interactions are achieved through hybridization of complementary DNA base pairs attached to the respective particles, resulting in quenching of their photoluminescence. The observed post-hybridization quenching is presumably due to a combined effect from an aggregation of CDs post duplex DNA formation and close proximity of multicolored CDs, having overlapped spectral regions leading to a nonradiative energy transfer process possibly released as heat. This strategy may contribute to the rational design of mutually interacting carbon dots for a better control over the resulting assembly structure for studying different biological phenomenon including molecular cytogenetics. One of the newly synthesized CDs was successfully used to image intracellular location of GAPDH mRNA using an event of change in fluorescence intensity (FI) of CDs. This selectivity was introduced by conjugating an oligonucleotide harboring complementary sequence to GAPDH mRNA. FI of this conjugated carbon dot, rCD-GAPDH, was also found to decrease in the presence of Ca2+, varied in relation to H+ concentrations, and could serve as a tool to quantify the intracellular concentrations of Ca2+ and pH value (H+) which can give important information about cell survival. Therefore, CD-oligonucleotide conjugates could serve as efficient probes for cellular events and interventions.

Composite formation in CdSe:Cu2Se nanocrystal films, charge transport characteristics and heterojunction performance

The use of nanocrystals as materials for potential technological applications depends on tailoring their properties through intentional doping with external impurities. We have used a new technique to synthesize nanocrystal thin films of CdSe:Cu₂Se containing different weight percentages (wt%) of Cu₂Se. The films were deposited on glass substrates at room temperature by co-evaporation of CdSe and Cu₂Se powder in nitrogen gas at a pressure larger than that required for conventional thin film deposition. The films consisted of nanograins of CdSe doped with Cu₂Se (i.e., nanograins of Cd_1−xCu_2(x)Se where x is the atom% of Cu₂Se doped into CdSe) for lower wt% of Cu₂Se, and nanocomposites of Cd_1−xCu_2(x)Se and Cu₂Se for higher wt% of Cu₂Se. An energy band diagram built using the Anderson model was used for discussing the heterojunction characteristics of the junction between nanograins of Cd_1−xCu_2(x)Se and Cu₂Se. To investigate the usefulness of the nanocrystal thin films of CdSe:Cu₂Se for practical applications, the I–V characteristics of p–p and p–n hetero-junctions formed by the films respectively with nanostructured films of similarly deposited Cu₂Se and CdSe films were studied.

The use of nanocrystals as materials for potential technological applications depends on tailoring their properties through intentional doping with external impurities.

Electrochemically-stable ligands bridge the photoluminescence-electroluminescence gap of quantum dots

Colloidal quantum dots are promising emitters for quantum-dot-based light-emitting-diodes. Though quantum dots have been synthesized with efficient, stable, and high colour-purity photoluminescence, inheriting their superior luminescent properties in light-emitting-diodes remains challenging. This is commonly attributed to unbalanced charge injection and/or interfacial exciton quenching in the devices. Here, a general but previously overlooked degradation channel in light-emitting-diodes, i.e., operando electrochemical reactions of surface ligands with injected charge carriers, is identified. We develop a strategy of applying electrochemically-inert ligands to quantum dots with excellent luminescent properties to bridge their photoluminescence-electroluminescence gap. This material-design principle is general for boosting electroluminescence efficiency and lifetime of the light-emitting-diodes, resulting in record-long operational lifetimes for both red-emitting light-emitting-diodes (T₉₅ > 3800 h at 1000 cd m⁻²) and blue-emitting light-emitting-diodes (T₅₀ > 10,000 h at 100 cd m⁻²). Our study provides a critical guideline for the quantum dots to be used in optoelectronic and electronic devices.

New design principles for bridging the photoluminescence and electroluminescence of colloidal quantum dots are needed. In this work, the authors report electrochemically-inert ligands as a general material-design strategy for realizing high-performance LEDs based on quantum dots.

Mid- and Long-Wave Infrared Optoelectronics via Intraband Transitions in PbS Colloidal Quantum Dots

Optical sensing in the mid- and long-wave infrared (MWIR, LWIR) is of paramount importance for a large spectrum of applications including environmental monitoring, gas sensing, hazard detection, food and product manufacturing inspection, and so forth. Yet, such applications to date are served by costly and complex epitaxially grown HgCdTe quantum-well and quantum-dot infrared photodetectors. The possibility of exploiting low-energy intraband transitions make colloidal quantum dots (CQD) an attractive low-cost alternative to expensive low bandgap materials for infrared applications. Unfortunately, fabrication of quantum dots exhibiting intraband absorption is technologically constrained by the requirement of controlled heavy doping, which has limited, so far, MWIR and LWIR CQD detectors to mercury-based materials. Here, we demonstrate intraband absorption and photodetection in heavily doped PbS colloidal quantum dots in the 5-9 μm range, beyond the PbS bulk band gap, with responsivities on the order of 10-4 A/W at 80 K. We have further developed a model based on quantum transport equations to understand the impact of electron population of the conduction band in the performance of intraband photodetectors and offer guidelines toward further performance improvement.

Gold nanoparticle on semiconductor quantum dot: Do surface ligands influence Fermi level equilibration

Semiconductor-metal heterojunction nanostructures possess an ability to store electrons upon photoexcitation through Fermi level equilibration. The unique role of capping ligands in modulating the equilibration of Fermi level in CdSe-Au heteronanostructures is explored by taking alkyl thiols and alkyl amines as examples. Alkyl thiol having its highest occupied molecular orbital (HOMO) above the valence band of the heterojunction nanostructure inhibits the exciton recombination by scavenging the photogenerated hole. This leads to the elevation in the Fermi level of Au and equilibration with the conduction band of CdSe. The Fermi level equilibrated electrons are further transferred to an acceptor molecule such as methyl viologen, demonstrating the potential of heterojunction nanostructures capped with hole accepting ligands for charge transport application in photovoltaics. In contrast, alkyl amine being a non-hole acceptor ligand with its HOMO placed below its valence band promotes rapid Au mediated exciton recombination, limiting its usefulness in charge transport application. Thus, the energetics of ligands on heterojunction nanostructures plays a decisive role in Fermi level equilibration.

Identification of eight pathogenic microorganisms by single concentration-dependent multicolor carbon dots

Single concentration-dependent carbon dots were synthesized and applied to the rapid identification of eight kinds of pathogenic microorganisms.