Crystal structure of a eukaryotic group II intron lariat

Scaffold-enabled high-resolution cryo-EM structure determination of RNA

Cryo-EM structure determination of protein-free RNAs has remained difficult with most attempts yielding low to moderate resolution and lacking nucleotide-level detail. These difficulties are compounded for small RNAs as cryo-EM is inherently more difficult for lower molecular weight macromolecules. Here we present a strategy for fusing small RNAs to a group II intron that yields high resolution structures of the appended RNA, which we demonstrate with the 86-nucleotide thiamine pyrophosphate (TPP) riboswitch, and visualizing the riboswitch ligand binding pocket at 2.5 Å resolution. We also determined the structure of the ligand-free apo state and observe that the aptamer domain of the riboswitch undergoes a large-scale conformational change upon ligand binding, illustrating how small molecule binding to an RNA can induce large effects on gene expression. This study both sets a new standard for cryo-EM riboswitch visualization and offers a versatile strategy applicable to a broad range of small to moderate-sized RNAs, which were previously intractable for high-resolution cryo-EM studies.

Research Progress of Group II Intron Splicing Factors in Land Plant Mitochondria

Mitochondria are important organelles that provide energy for the life of cells. Group II introns are usually found in the mitochondrial genes of land plants. Correct splicing of group II introns is critical to mitochondrial gene expression, mitochondrial biological function, and plant growth and development. Ancestral group II introns are self-splicing ribozymes that can catalyze their own removal from pre-RNAs, while group II introns in land plant mitochondria went through degenerations in RNA structures, and thus they lost the ability to self-splice. Instead, splicing of these introns in the mitochondria of land plants is promoted by nuclear- and mitochondrial-encoded proteins. Many proteins involved in mitochondrial group II intron splicing have been characterized in land plants to date. Here, we present a summary of research progress on mitochondrial group II intron splicing in land plants, with a major focus on protein splicing factors and their probable functions on the splicing of mitochondrial group II introns.

Structural basis of branching during RNA splicing

Branching is a critical step in RNA splicing that is essential for 5' splice site selection. Recent spliceosome structures have led to competing models for the recognition of the invariant adenosine at the branch point. However, there are no structures of any splicing complex with the adenosine nucleophile docked in the active site and positioned to attack the 5' splice site. Thus we lack a mechanistic understanding of adenosine selection and splice site recognition during RNA splicing. Here we present a cryo-electron microscopy structure of a group II intron that reveals that active site dynamics are coupled to the formation of a base triple within the branch-site helix that positions the 2'-OH of the adenosine for nucleophilic attack on the 5' scissile phosphate. This structure, complemented with biochemistry and comparative analyses to splicing complexes, supports a base triple model of adenosine recognition for branching within group II introns and the evolutionarily related spliceosome.

Structural insights into intron catalysis and dynamics during splicing

The group II intron ribonucleoprotein is an archetypal splicing system with numerous mechanistic parallels to the spliceosome, including excision of lariat introns1,2. Despite the importance of branching in RNA metabolism, structural understanding of this process has remained elusive. Here we present a comprehensive analysis of three single-particle cryogenic electron microscopy structures captured along the splicing pathway. They reveal the network of molecular interactions that specifies the branchpoint adenosine and positions key functional groups to catalyse lariat formation and coordinate exon ligation. The structures also reveal conformational rearrangements of the branch helix and the mechanism of splice site exchange that facilitate the transition from branching to ligation. These findings shed light on the evolution of splicing and highlight the conservation of structural components, catalytic mechanism and dynamical strategies retained through time in premessenger RNA splicing machines.

In Silico Discovery of Group II Intron RNA Splicing Inhibitors

Here, we describe the discovery of compounds that inhibit self-splicing in group II introns. Using docking calculations, we targeted the catalytic active site within the Oceanobacillus iheyensis group IIC intron and virtually screened a library of lead-like compounds. From this initial virtual screen, we identified three unique scaffolds that inhibit splicing in vitro. Additional tests revealed that an analog of the lead scaffold inhibits splicing in an intron-dependent manner. Furthermore, this analog exhibited activity against the group II intron from a different class: the yeast ai5γ IIB intron. The splicing inhibitors we identified could serve as chemical tools for developing group II intron-targeted antifungals, and, more broadly, our results highlight the potential of in silico techniques for identifying bioactive hits against structured and functionally complex RNAs.

Fluorescent labeling of RNA and DNA on the Hoogsteen edge using sulfinate chemistry

We have devised a single pot, low-cost method to add azide groups to unmodified nucleic acids without the need for enzymes or chemically modified nucleoside triphosphates. This involves reacting an azide-containing sulfinate salt with the nucleic acid, leading to replacement of C-H bonds on the nucleobase aromatic rings with C-R, where R is the azide-containing linker derived from the original sulfinate salt. With the addition of azide functional groups, the modified nucleic acid can easily be reacted with any alkyne-labeled compound of interest, including fluorescent dyes as shown in this work. This methodology enables the fluorescent labeling of a wide variety of nucleic acids, including natively folded RNAs, under mild conditions with minimal effects upon biochemical function and ribozyme catalysis. To demonstrate this, we show that a pair of labeled complementary ssDNA oligonucleotides (oligos) can hybridize to form dsDNA, even when labeled with multiple fluorophores per oligo. In addition, we also demonstrate that two different group II introns can splice when prelabeled internally with fluorophores, using our method. Broadly, this demonstrates that sulfinate modification of RNA is compatible with ribozyme function and Watson-Crick pairing, while preserving the labile backbone.

General Strategies for RNA X-ray Crystallography

An extremely small proportion of the X-ray crystal structures deposited in the Protein Data Bank are of RNA or RNA-protein complexes. This is due to three main obstacles to the successful determination of RNA structure: (1) low yields of pure, properly folded RNA; (2) difficulty creating crystal contacts due to low sequence diversity; and (3) limited methods for phasing. Various approaches have been developed to address these obstacles, such as native RNA purification, engineered crystallization modules, and incorporation of proteins to assist in phasing. In this review, we will discuss these strategies and provide examples of how they are used in practice.

Structures of a mobile intron retroelement poised to attack its structured DNA target

Group II introns are ribozymes that catalyze their self-excision and function as retroelements that invade DNA. As retrotransposons, group II introns form ribonucleoprotein (RNP) complexes that roam the genome, integrating by reversal of forward splicing. Here we show that retrotransposition is achieved by a tertiary complex between a structurally elaborate ribozyme, its protein mobility factor, and a structured DNA substrate. We solved cryo-electron microscopy structures of an intact group IIC intron-maturase retroelement that was poised for integration into a DNA stem-loop motif. By visualizing the RNP before and after DNA targeting, we show that it is primed for attack and fits perfectly with its DNA target. This study reveals design principles of a prototypical retroelement and reinforces the hypothesis that group II introns are ancient elements of genetic diversification.

Structure-based thermodynamics of ion selectivity (Mg2+versus Ca2+ and K+versus Na+) in the active site of the eukaryotic lariat group II intron from algae Pylaiella littoralis

Group II introns are metalloenzymes that can catalyze self-splicing. Recently, the crystal structures of the eukaryotic group IIB lariat intron from the brown algae Pylaiella littoralis have been reported for two intermediate states (pre-hydrolytic (2s) and post-hydrolytic) along the self-splicing pathway. Three characteristic metal-ion binding sites (M1 and M2 sites for catalytic Mg2+ ions, and K1 site for K+) in the catalytic pocket of the lariat intron have been identified and proposed to be crucial for self-splicing. Using the X-ray structures as a template, we quantitatively estimated the energetics of divalent (Mg2+versus Ca2+) and monovalent (K+versus Na+) ion selectivity and established a direct link between the energetics and structures of this lariat intron (bound to cognate and near-cognate metal ions). Molecular dynamics (MD) free energy simulations showed that the lariat intron was strongly selective between divalent metal ions. The strength of divalent metal-ion selectivity was noticeably high in the post-hydrolytic state (ΔΔG ≈ 20 kcal mol-1) relative to its pre-hydrolytic (2s) state (ΔΔG ≈ 13 kcal mol-1). Quantum chemical calculations ensured that the sign of the estimated divalent metal-ion selectivity was correct. The M1-binding pocket was less solvent-exposed in the case of the post-hydrolytic state relative to the pre-hydrolytic (2s) state, which boosted the metal-ion selectivity of the former. Surprisingly, in contrast to the bacterial linear group II intron, the lariat intron was found to be non-selective between monovalent ions (K+versus Na+). The interaction network in the first coordination shell of Ca2+ in the M1-binding pocket was different relative to Mg2+. Mg2+ substitution by Ca2+ resulted in the substitution of a single M1-RNA interaction by the M1-water interaction. In the pre-hydrolytic (2s) state, Ca2+ substitution completely disrupted the M1⋯5'-exon interaction; thus, the nature of the divalent metal ion is critical for catalysis. The interaction network in the M2 site was independent of the nature of the divalent metal ions (Mg2+ or Ca2+). The monovalent ion was loosely bound in the wet binding pocket (K1 site) of the lariat intron; thus, the substitution of K+ by Na+ could not significantly alter the free energy of the complex. The metal ion selectivity was dependent on the solvent accessibility of the metal-ion-binding-pocket, dry pocket enhanced the selectivity.

Natural circularly permuted group II introns in bacteria produce RNA circles

Group II self-splicing introns are large structured RNAs that remove themselves from transcripts while simultaneously sealing the resulting gaps. Some representatives can subsequently reverse splice into DNA, accounting for their pervasive distribution in bacteria. The catalytically active tertiary structure of each group II intron is assembled from six domains that are arranged in a conserved order. Here, we report structural isomers of group II introns, called CP group II ribozymes, wherein the characteristic order of domains has been altered. Domains five and six, which normally reside at the 3' end of group II introns, instead occupy the 5' end to form circularly permuted variants. These unusual group II intron derivatives are catalytically active and generate large linear branched and small circular RNAs, reaction products that are markedly different from those generated by canonical group II introns. The biological role of CP group II ribozymes is currently unknown.

The pentatricopeptide repeat protein EMB1270 interacts with CFM2 to splice specific group II introns in Arabidopsis chloroplasts

Chloroplast biogenesis requires the coordinated expression of chloroplast and nuclear genes. Here, we show that EMB1270, a plastid-localized pentatricopeptide repeat (PPR) protein, is required for chloroplast biogenesis in Arabidopsis thaliana. Knockout of EMB1270 led to embryo arrest, whereas a mild knockdown mutant of EMB1270 displayed a virescent phenotype. Almost no photosynthetic proteins accumulated in the albino emb1270 knockout mutant. By contrast, in the emb1270 knockdown mutant, the levels of ClpP1 and photosystem I (PSI) subunits were significantly reduced, whereas the levels of photosystem II (PSII) subunits were normal. Furthermore, the splicing efficiencies of the clpP1.2, ycf3.1, ndhA, and ndhB plastid introns were dramatically reduced in both emb1270 mutants. RNA immunoprecipitation revealed that EMB1270 associated with these introns in vivo. In an RNA electrophoretic mobility shift assay (REMSA), a truncated EMB1270 protein containing the 11 N-terminal PPR motifs bound to the predicted sequences of the clpP1.2, ycf3.1, and ndhA introns. In addition, EMB1270 specifically interacted with CRM Family Member 2 (CFM2). Given that CFM2 is known to be required for splicing the same plastid RNAs, our results suggest that EMB1270 associates with CFM2 to facilitate the splicing of specific group II introns in Arabidopsis.

Organellar Introns in Fungi, Algae, and Plants

Introns are ubiquitous in eukaryotic genomes and have long been considered as ‘junk RNA’ but the huge energy expenditure in their transcription, removal, and degradation indicate that they may have functional significance and can offer evolutionary advantages. In fungi, plants and algae introns make a significant contribution to the size of the organellar genomes. Organellar introns are classified as catalytic self-splicing introns that can be categorized as either Group I or Group II introns. There are some biases, with Group I introns being more frequently encountered in fungal mitochondrial genomes, whereas among plants Group II introns dominate within the mitochondrial and chloroplast genomes. Organellar introns can encode a variety of proteins, such as maturases, homing endonucleases, reverse transcriptases, and, in some cases, ribosomal proteins, along with other novel open reading frames. Although organellar introns are viewed to be ribozymes, they do interact with various intron- or nuclear genome-encoded protein factors that assist in the intron RNA to fold into competent splicing structures, or facilitate the turn-over of intron RNAs to prevent reverse splicing. Organellar introns are also known to be involved in non-canonical splicing, such as backsplicing and trans-splicing which can result in novel splicing products or, in some instances, compensate for the fragmentation of genes by recombination events. In organellar genomes, Group I and II introns may exist in nested intronic arrangements, such as introns within introns, referred to as twintrons, where splicing of the external intron may be dependent on splicing of the internal intron. These nested or complex introns, with two or three-component intron modules, are being explored as platforms for alternative splicing and their possible function as molecular switches for modulating gene expression which could be potentially applied towards heterologous gene expression. This review explores recent findings on organellar Group I and II introns, focusing on splicing and mobility mechanisms aided by associated intron/nuclear encoded proteins and their potential roles in organellar gene expression and cross talk between nuclear and organellar genomes. Potential application for these types of elements in biotechnology are also discussed.

Identification of polycistronic transcriptional units and non-canonical introns in green algal chloroplasts based on long-read RNA sequencing data

BACKGROUND

Chloroplasts are important semi-autonomous organelles in plants and algae. Unlike higher plants, the chloroplast genomes of green algal linage have distinct features both in organization and expression. Despite the architecture of chloroplast genome having been extensively studied in higher plants and several model species of algae, little is known about the transcriptional features of green algal chloroplast-encoded genes.

RESULTS

Based on full-length cDNA (Iso-Seq) sequencing, we identified widely co-transcribed polycistronic transcriptional units (PTUs) in the green alga Caulerpa lentillifera. In addition to clusters of genes from the same pathway, we identified a series of PTUs of up to nine genes whose function in the plastid is not understood. The RNA data further allowed us to confirm widespread expression of fragmented genes and conserved open reading frames, which are both important features in green algal chloroplast genomes. In addition, a newly fragmented gene specific to C. lentillifera was discovered, which may represent a recent gene fragmentation event in the chloroplast genome. With the newly annotated exon-intron boundary information, gene structural annotation was greatly improved across the siphonous green algae lineages. Our data also revealed a type of non-canonical Group II introns, with a deviant secondary structure and intronic ORFs lacking known splicing or mobility domains. These widespread introns have conserved positions in their genes and are excised precisely despite lacking clear consensus intron boundaries.

CONCLUSION

Our study fills important knowledge gaps in chloroplast genome organization and transcription in green algae, and provides new insights into expression of polycistronic transcripts, freestanding ORFs and fragmented genes in algal chloroplast genomes. Moreover, we revealed an unusual type of Group II intron with distinct features and conserved positions in Bryopsidales. Our data represents interesting additions to knowledge of chloroplast intron structure and highlights clusters of uncharacterized genes that probably play important roles in plastids.

SHAPE Profiling to Probe Group II Intron Conformational Dynamics During Splicing

Selective 2'-hydroxyl acylation analyzed by primer extension (SHAPE) is a widely used technique for studying the structure and function of RNA molecules. It characterizes the flexibility of single nucleotides in the context of the local RNA structure. Here we describe the application of SHAPE-MaP (mutational profiling) to study different conformational states of the group II intron during the self-splicing reaction.

Structural basis for conformational equilibrium of the catalytic spliceosome

The ATPase Prp16 governs equilibrium between the branching (B^∗/C) and exon ligation (C^∗/P) conformations of the spliceosome. Here, we present the electron cryomicroscopy reconstruction of the Saccharomyces cerevisiae C-complex spliceosome at 2.8 Å resolution and identify a novel C-complex intermediate (C_i) that elucidates the molecular basis for this equilibrium. The exon-ligation factors Prp18 and Slu7 bind to C_i before ATP hydrolysis by Prp16 can destabilize the branching conformation. Biochemical assays suggest that these pre-bound factors prime the C complex for conversion to C^∗ by Prp16. A complete model of the Prp19 complex (NTC) reveals how the branching factors Yju2 and Isy1 are recruited by the NTC before branching. Prp16 remodels Yju2 binding after branching, allowing Yju2 to remain tethered to the NTC in the C^∗ complex to promote exon ligation. Our results explain how Prp16 action modulates the dynamic binding of step-specific factors to alternatively stabilize the C or C^∗ conformation and establish equilibrium of the catalytic spliceosome.

•

Cryo-EM reveals new C_i spliceosome intermediate between branching and exon ligation

•

Binding of branching and exon-ligation factors to C_i governs spliceosome equilibrium

•

Exon-ligation factors Slu7 and Prp18 bind C_i weakly before Prp16 action

•

After Prp16 action, pre-bound Slu7 and Prp18 bind strongly to promote exon ligation

The Chloroplast Trans-Splicing RNA-Protein Supercomplex from the Green Alga Chlamydomonas reinhardtii

In eukaryotes, RNA trans-splicing is a significant RNA modification process for the end-to-end ligation of exons from separately transcribed primary transcripts to generate mature mRNA. So far, three different categories of RNA trans-splicing have been found in organisms within a diverse range. Here, we review trans-splicing of discontinuous group II introns, which occurs in chloroplasts and mitochondria of lower eukaryotes and plants. We discuss the origin of intronic sequences and the evolutionary relationship between chloroplast ribonucleoprotein complexes and the nuclear spliceosome. Finally, we focus on the ribonucleoprotein supercomplex involved in trans-splicing of chloroplast group II introns from the green alga Chlamydomonas reinhardtii. This complex has been well characterized genetically and biochemically, resulting in a detailed picture of the chloroplast ribonucleoprotein supercomplex. This information contributes substantially to our understanding of the function of RNA-processing machineries and might provide a blueprint for other splicing complexes involved in trans- as well as cis-splicing of organellar intron RNAs.

Exon and protein positioning in a pre-catalytic group II intron RNP primed for splicing

Group II introns are the putative progenitors of nuclear spliceosomal introns and use the same two-step splicing pathway. In the cell, the intron RNA forms a ribonucleoprotein (RNP) complex with the intron-encoded protein (IEP), which is essential for splicing. Although structures of spliced group II intron RNAs and RNP complexes have been characterized, structural insights into the splicing process remain enigmatic due to lack of pre-catalytic structural models. Here, we report two cryo-EM structures of endogenously produced group II intron RNPs trapped in their pre-catalytic state. Comparison of the catalytically activated precursor RNP to its previously reported spliced counterpart allowed identification of key structural rearrangements accompanying splicing, including a remodeled active site and engagement of the exons. Importantly, altered RNA-protein interactions were observed upon splicing among the RNP complexes. Furthermore, analysis of the catalytically inert precursor RNP demonstrated the structural impact of the formation of the active site on RNP architecture. Taken together, our results not only fill a gap in understanding the structural basis of IEP-assisted group II intron splicing, but also provide parallels to evolutionarily related spliceosomal splicing.

Titration of Adenine in a GA Mismatch with Grand Canonical Simulations

Computational prediction of the pKa of ionizable groups remains a central challenge in biomolecular modeling. Although all-atom fixed-charge force fields could be accurate to describe the interaction network within the biomolecules, proper sampling techniques are required to obtain the thermodynamic information in the (de)protonation event. Sufficient sampling requires an ensemble of structures from simulations with proper treatments of the acid-base equilibria, and the grand canonical simulation technique could be used to model the growth/annihilation of hydrogen atoms by merging Hamiltonians of different protonation states into one simulation ensemble. The electrostatic feature of nucleotide systems is especially difficult to model, and the situation becomes more challenging when the ionizable site is highly perturbed. Although there are many successful predictions obtained from the grand canonical constant pH simulations, few reports focus on highly perturbed nucleotide systems with unconventional base-pair features. In this work, with the discrete constant pH method, we investigate the titration thermodynamics of an adenine in the catalytic triad in a 35-nucleotide single-stranded RNA hairpin, featuring an unconventional GA mismatch and a substantially shifted pKa value. Validation tests are performed with two system setups, both of which provide pKa predictions in good agreement with the experimental value. A single-configuration-based technique is used to calculate the pKa for comparison. The current success indicates the predictive power of the current nucleotide modeling framework.

Group II intron as cold sensor for self-preservation and bacterial conjugation

Group II introns are self-splicing ribozymes and mobile genetic elements. Splicing is required for both expression of the interrupted host gene and intron retromobility. For the pRS01 plasmid-encoded Lactococcus lactis group II intron, Ll.LtrB, splicing enables expression of the intron's host relaxase protein. Relaxase, in turn, initiates horizontal transfer of the conjugative pRS01 plasmid and stimulates retrotransposition of the intron. Little is known about how splicing of bacterial group II introns is influenced by environmental conditions. Here, we show that low temperatures can inhibit Ll.LtrB intron splicing. Whereas autocatalysis is abolished in the cold, splicing is partially restored by the intron-encoded protein (IEP). Structure profiling reveals cold-induced disruptions of key tertiary interactions, suggesting that a kinetic trap prevents the intron RNA from assuming its native state. Interestingly, while reduced levels of transcription and splicing lead to a paucity of excised intron in the cold, levels of relaxase mRNA are maintained, partially due to diminished intron-mediated mRNA targeting, allowing intron spread by conjugal transfer. Taken together, this study demonstrates not only the intrinsic cold sensitivity of group II intron splicing and the role of the IEP for cold-stress adaptation, but also maintenance of horizontal plasmid and intron transfer under cold-shock.

DEK46 performs C-to-U editing of a specific site in mitochondrial nad7 introns that is critical for intron splicing and seed development in maize

The self-splicing of group II introns during RNA processing depends on their catalytic structure and is influenced by numerous factors that promote the formation of that structure through direct binding. Here we report that C-to-U editing at a specific position in two nad7 introns is essential to splicing, which also implies that the catalytic activity of non-functional group II introns could be restored by editing. We characterized a maize (Zea mays) mutant, dek46, with a defective kernel phenotype; Dek46 encodes a pentatricopeptide repeat DYW protein exclusively localized in mitochondria. Analyses of the coding regions of mitochondrial transcripts did not uncover differences in RNA editing between dek46 mutant and wild-type maize, but showed that splicing of nad7 introns 3 and 4 is severely reduced in the mutant. Furthermore, editing at nucleotide 22 of domain 5 (D5-C22) of both introns is abolished in dek46. We constructed chimeric introns by swapping D5 of P.li.LSUI2 with D5 of nad7 intron 3. In vitro splicing assays indicated that the chimeric intron containing D5-U22 can be self-spliced, but the one containing D5-C22 cannot. These results indicate that DEK46 functions in the C-to-U editing of D5-C22 of both introns, and the U base at this position is critical to intron splicing.

LocalSTAR3D: a local stack-based RNA 3D structural alignment tool

A fast-growing number of non-coding RNA structures have been resolved and deposited in Protein Data Bank (PDB). In contrast to the wide range of global alignment and motif search tools, there is still a lack of local alignment tools. Among all the global alignment tools for RNA 3D structures, STAR3D has become a valuable tool for its unprecedented speed and accuracy. STAR3D compares the 3D structures of RNA molecules using consecutive base-pairs (stacks) as anchors and generates an optimal global alignment. In this article, we developed a local RNA 3D structural alignment tool, named LocalSTAR3D, which was extended from STAR3D and designed to report multiple local alignments between two RNAs. The benchmarking results show that LocalSTAR3D has better accuracy and coverage than other local alignment tools. Furthermore, the utility of this tool has been demonstrated by rediscovering kink-turn motif instances, conserved domains in group II intron RNAs, and the tRNA mimicry of IRES RNAs.

Visualizing group II intron dynamics between the first and second steps of splicing

Group II introns are ubiquitous self-splicing ribozymes and retrotransposable elements evolutionarily and chemically related to the eukaryotic spliceosome, with potential applications as gene-editing tools. Recent biochemical and structural data have captured the intron in multiple conformations at different stages of catalysis. Here, we employ enzymatic assays, X-ray crystallography, and molecular simulations to resolve the spatiotemporal location and function of conformational changes occurring between the first and the second step of splicing. We show that the first residue of the highly-conserved catalytic triad is protonated upon 5’-splice-site scission, promoting a reversible structural rearrangement of the active site (toggling). Protonation and active site dynamics induced by the first step of splicing facilitate the progression to the second step. Our insights into the mechanism of group II intron splicing parallels functional data on the spliceosome, thus reinforcing the notion that these evolutionarily-related molecular machines share the same enzymatic strategy.

Group II introns are self-splicing ribozymes. Here, the authors employ enzymatic assay, X-ray crystallography and molecular dynamics simulations to show that protonation of the group II intron catalytic triad plays an important role for the transition from the first to the second step of splicing.

Unraveling the structure and biological functions of RNA triple helices

It has been nearly 63 years since the first characterization of an RNA triple helix in vitro by Gary Felsenfeld, David Davies, and Alexander Rich. An RNA triple helix consists of three strands: A Watson–Crick RNA double helix whose major‐groove establishes hydrogen bonds with the so‐called “third strand”. In the past 15 years, it has been recognized that these major‐groove RNA triple helices, like single‐stranded and double‐stranded RNA, also mediate prominent biological roles inside cells. Thus far, these triple helices are known to mediate catalysis during telomere synthesis and RNA splicing, bind to ligands and ions so that metabolite‐sensing riboswitches can regulate gene expression, and provide a clever strategy to protect the 3′ end of RNA from degradation. Because RNA triple helices play important roles in biology, there is a renewed interest in better understanding the fundamental properties of RNA triple helices and developing methods for their high‐throughput discovery. This review provides an overview of the fundamental biochemical and structural properties of major‐groove RNA triple helices, summarizes the structure and function of naturally occurring RNA triple helices, and describes prospective strategies to isolate RNA triple helices as a means to establish the “triplexome”.

This article is categorized under:

RNA Structure and Dynamics > RNA Structure and Dynamics

RNA Structure and Dynamics > RNA Structure, Dynamics and Chemistry

RNA Structure and Dynamics > Influence of RNA Structure in Biological Systems

Transitions between the steps of forward and reverse splicing of group IIC introns

Group II introns are mobile genetic elements that perform both self-splicing and intron mobility reactions. These ribozymes are comprised of a catalytic RNA core that binds to an intron-encoded protein (IEP) to form a ribonucleoprotein (RNP) complex. Splicing proceeds through two competing reactions: hydrolysis or branching. Group IIC intron ribozymes have a minimal RNA architecture, and splice almost exclusively through hydrolysis in ribozyme reactions. Addition of the IEP allows the splicing reaction to form branched lariat RNPs capable of intron mobility. Here we examine ribozyme splicing, IEP-dependent splicing, and mobility reactions of a group IIC intron from the thermophilic bacterium Thermoanerobacter italicus (Ta.it.I1). We show that Ta.it.I1 is highly active for ribozyme activity, forming linear hydrolytic intron products. Addition of purified IEP switches activity to the canonical lariat forming splicing reaction. We demonstrate that the Ta.it.I1 group IIC intron coordinates the progression of the forward splicing reaction through a π-π' interaction between intron domains II and VI. We further show that branched splicing is supported in the absence of the IEP when the π-π' interaction is mutated. We also investigated the regulation of the two steps of reverse splicing during intron mobility into DNA substrates. Using a fluorescent mobility assay that simultaneously visualizes all steps of intron integration into DNA, we show that completion of reverse splicing is tightly coupled to cDNA synthesis regardless of mutation of the π-π' interaction.

Cryo-EM Structures of a Group II Intron Reverse Splicing into DNA

Group II introns are a class of retroelements that invade DNA through a copy-and-paste mechanism known as retrotransposition. Their coordinated activities occur within a complex that includes a maturase protein, which promotes splicing through an unknown mechanism. The mechanism of splice site exchange within the RNA active site during catalysis also remains unclear. We determined two cryo-EM structures at 3.6-Å resolution of a group II intron reverse splicing into DNA. These structures reveal that the branch-site domain VI helix swings 90°, enabling substrate exchange during DNA integration. The maturase assists catalysis through a transient RNA-protein contact with domain VI that positions the branch-site adenosine for lariat formation during forward splicing. These findings provide the first direct evidence of the role the maturase plays during group II intron catalysis. The domain VI dynamics closely parallel spliceosomal branch-site helix movement and provide strong evidence for a retroelement origin of the spliceosome.

Retroelement origins of pre-mRNA splicing

Recent cryo-EM structures of a group II intron caught in the process of invading DNA have given new insight into the mechanisms of both splicing and retrotransposition. Conformational dynamics involving the branch-site helix domain VI are responsible for substrate exchange between the two steps of splicing. These structural rearrangements have strong parallels with the movement of the branch-site helix in the spliceosome during catalysis. This is strong evidence for the spliceosome evolving from a group II intron ancestor. We observe other topological changes in the overall structure of the catalytic domain V that may occur in the spliceosome as well. Therefore, studying group II introns not only provides us with insight into the evolutionary origins of the spliceosome, but also may inform the design of experiments to further probe structure-function relationships in this eukaryotic splicing apparatus. This article is categorized under: RNA Processing > Splicing Mechanisms RNA Structure and Dynamics > RNA Structure, Dynamics, and Chemistry RNA Structure and Dynamics > Influence of RNA Structure in Biological Systems RNA Evolution and Genomics > RNA and Ribonucleoprotein Evolution.

Zinc-finger protein CNBP alters the 3-D structure of lncRNA Braveheart in solution

Long non-coding RNAs (lncRNAs) constitute a significant fraction of the transcriptome, playing important roles in development and disease. However, our understanding of structure-function relationships for this emerging class of RNAs has been limited to secondary structures. Here, we report the 3-D atomistic structural study of epigenetic lncRNA, Braveheart (Bvht), and its complex with CNBP (Cellular Nucleic acid Binding Protein). Using small angle X-ray scattering (SAXS), we elucidate the ensemble of Bvht RNA conformations in solution, revealing that Bvht lncRNA has a well-defined, albeit flexible 3-D structure that is remodeled upon CNBP binding. Our study suggests that CNBP binding requires multiple domains of Bvht and the RHT/AGIL RNA motif. We show that RHT/AGIL, previously shown to interact with CNBP, contains a highly flexible loop surrounded by more ordered helices. As one of the largest RNA-only 3-D studies, the work lays the foundation for future structural studies of lncRNA-protein complexes.

Metal ions and sugar puckering balance single-molecule kinetic heterogeneity in RNA and DNA tertiary contacts

The fidelity of group II intron self-splicing and retrohoming relies on long-range tertiary interactions between the intron and its flanking exons. By single-molecule FRET, we explore the binding kinetics of the most important, structurally conserved contact, the exon and intron binding site 1 (EBS1/IBS1). A comparison of RNA-RNA and RNA-DNA hybrid contacts identifies transient metal ion binding as a major source of kinetic heterogeneity which typically appears in the form of degenerate FRET states. Molecular dynamics simulations suggest a structural link between heterogeneity and the sugar conformation at the exon-intron binding interface. While Mg2+ ions lock the exon in place and give rise to long dwell times in the exon bound FRET state, sugar puckering alleviates this structural rigidity and likely promotes exon release. The interplay of sugar puckering and metal ion coordination may be an important mechanism to balance binding affinities of RNA and DNA interactions in general.

PPR14 Interacts With PPR-SMR1 and CRM Protein Zm-mCSF1 to Facilitate Mitochondrial Intron Splicing in Maize

In plants, splicing of organellar group II introns involves numerous nucleus-encoded trans-factors. But, how these trans-factors function and interact is not well understood. Here we report the function of a pentatricopeptide repeat (PPR) protein PPR14 and its physical relationship with other splicing factors in mitochondria. Null mutations of PPR14 severely arrest the embryo and endosperm development, causing an empty pericarp phenotype. PPR14 is required for the splicing of NADH dehydrogenase 2 (nad2) intron 3 and nad7 introns 1 and 2 in mitochondria. The absence of nad2 and nad7 transcripts leads to disruption of the mitochondrial complex I assembly and abolishes its NADH dehydrogenase activity. This is accompanied with increased levels of other mitochondrial complexes and elevated expression of the alternative oxidase proteins. As the function of PPR14 overlaps with PPR-SMR1 and the CRM-domain containing protein Zm-mCSF1, we tested their interactions. Protein-protein interaction analysis indicated that PPR14 interacts with PPR-SMR1 and Zm-mCSF1, suggesting that these three proteins may form a complex. As PPR proteins and CRM-domain containing proteins have many members in mitochondria and chloroplasts, we propose that organellar group II intron splicing is probably mediated by a dynamic complex that includes different PPR and CRM proteins in plants.

Branch site bulge conformations in domain 6 determine functional sugar puckers in group II intron splicing

Although group II intron ribozymes are intensively studied the question how structural dynamics affects splicing catalysis has remained elusive. We report for the first time that the group II intron domain 6 exists in a secondary structure equilibrium between a single- and a two-nucleotide bulge conformation, which is directly linked to a switch between sugar puckers of the branch site adenosine. Our study determined a functional sugar pucker equilibrium between the transesterification active C2'-endo conformation of the branch site adenosine in the 1nt bulge and an inactive C3'-endo state in the 2nt bulge fold, allowing the group II intron to switch its activity from the branching to the exon ligation step. Our detailed NMR spectroscopic investigation identified magnesium (II) ions and the branching reaction as regulators of the equilibrium populations. The tuneable secondary structure/sugar pucker equilibrium supports a conformational selection mechanism to up- and downregulate catalytically active and inactive states of the branch site adenosine to orchestrate the multi-step splicing process. The conformational dynamics of group II intron domain 6 is also proposed to be a key aspect for the directionality selection in reversible splicing.

A shared vision for macromolecular crystallography over the next five years

Macromolecular crystallography (MX) is the dominant means of determining the three-dimensional structures of biological macromolecules, but the method has reached a critical juncture. New diffraction-limited storage rings and upgrades to the existing sources will provide beamlines with higher flux and brilliance, and even the largest detectors can collect at rates of several hundred hertz. Electron cryomicroscopy is successfully competing for structural biologists' most exciting projects. As a result, formerly scarce beam time is becoming increasingly abundant, and beamlines must innovate to attract users and ensure continued funding. Here, we will show how data collection has changed over the preceding five years and how alternative methods have emerged. We then explore how MX at synchrotrons might develop over the next five years. We predict that, despite the continued dominance of rotation crystallography, applications previously considered niche or experimental, such as serial crystallography, pink-beam crystallography, and crystallography at energies above 25 keV and below 5 keV, will rise in prominence as beamlines specialize to offer users the best value. Most of these emerging methods will require new hardware and software. With these advances, MX will more efficiently provide the high-resolution structures needed for drug development. MX will also be able to address a broader range of questions than before and contribute to a deeper understanding of biological processes in the context of integrative structural biology.

PPR-SMR1 is required for the splicing of multiple mitochondrial introns, interacts with Zm-mCSF1, and is essential for seed development in maize

Group II introns are ribozymes that can excise themselves from precursor-RNA transcripts, but plant organellar group II introns have structural deviations that inhibit ribozyme activity. Therefore, splicing of these introns requires the assistance of nuclear- and/or organellar-encoded splicing factors; however, how these splicing factors function remains unclear. In this study, we report the functions and interactions of two splicing factors, PPR-SMR1 and Zm-mCSF1, in intron splicing in maize mitochondria. PPR-SMR1 is a SMR domain-containing pentatricopeptide repeat (PPR) protein and Zm-mCSF1 is a CRM domain-containing protein, and both are targeted to mitochondria. Loss-of-function mutations in each of them severely arrests embryogenesis and endosperm development in maize. Functional analyses indicate that PPR-SMR1 and Zm-mCSF1 are required for the splicing of most mitochondrial group II introns. Among them, nad2-intron 2 and 3, and nad5-intron 1 are PPR-SMR1/Zm-mCSF1-dependent introns. Protein interaction assays suggest that PPR-SMR1 can interact with Zm-mCSF1 through its N-terminus, and that Zm-mCSF1 is self-interacting. Our findings suggest that PPR-SMR1, a novel splicing factor, acts in the splicing of multiple group II introns in maize mitochondria, and the protein-protein interaction between it and Zm-mCSF1 might allow the formation of large macromolecular splicing complexes.

Structural accommodations accompanying splicing of a group II intron RNP

Group II introns, the putative progenitors of spliceosomal introns and retrotransposons, are ribozymes that are capable of self-splicing and DNA invasion. In the cell, group II introns form ribonucleoprotein (RNP) complexes with an intron-encoded protein, which is essential to folding, splicing and retromobility of the intron. To understand the structural accommodations underlying splicing, in preparation for retromobility, we probed the endogenously expressed Lactococcus lactis Ll.LtrB group II intron RNP using SHAPE. The results, which are consistent in vivo and in vitro, provide insights into the dynamics of the intron RNP as well as RNA-RNA and RNA-protein interactions. By comparing the excised intron RNP with mutant RNPs in the precursor state, confined SHAPE profile differences were observed, indicative of rearrangements at the active site as well as disengagement at the functional RNA-protein interface in transition between the two states. The exon-binding sequences in the intron RNA, which interact with the 5' exon and the target DNA, show increased flexibility after splicing. In contrast, stability of major tertiary and protein interactions maintains the scaffold of the RNA through the splicing transition, while the active site is realigned in preparation for retromobility.

Structural dynamics of the N-terminal domain and the Switch loop of Prp8 during spliceosome assembly and activation

Precursor message RNA (pre-mRNA) splicing is executed by the spliceosome, a large ribonucleoprotein (RNP) machinery that is comparable to the ribosome. Driven by the rapid progress of cryo-electron microscopy (cryo-EM) technology, high resolution structures of the spliceosome in its different splicing stages have proliferated over the past three years, which has greatly facilitated the mechanistic understanding of pre-mRNA splicing. As the largest and most conserved protein in the spliceosome, Prp8 plays a pivotal role within this protein-directed ribozyme. Structure determination of different spliceosomal complexes has revealed intimate and dynamic interactions between Prp8 and catalytic RNAs as well as with other protein factors during splicing. Here we review the structural dynamics of two elements of Prp8, the N-terminal domain (N-domain) and the Switch loop, and delineate the dynamic organisation and underlying functional significance of these two elements during spliceosome assembly and activation. Further biochemical and structural dissections of idiographic splicing stages are much needed for a complete understanding of the spliceosome and pre-mRNA splicing.

Multiple RNA-RNA tertiary interactions are dispensable for formation of a functional U2/U6 RNA catalytic core in the spliceosome

The active 3D conformation of the spliceosome's catalytic U2/U6 RNA core is stabilised by a network of secondary and tertiary RNA interactions, but also depends on spliceosomal proteins for its formation. To determine the contribution towards splicing of specific RNA secondary and tertiary interactions in the U2/U6 RNA core, we introduced mutations in critical U6 nucleotides and tested their effect on splicing using a yeast in vitro U6 depletion/complementation system. Elimination of selected RNA tertiary interactions involving the U6 catalytic triad, or deletions of the bases of U6-U80 or U6-A59, had moderate to no effect on splicing, showing that the affected secondary and tertiary interactions are not required for splicing catalysis. However, removal of the base of U6-G60 of the catalytic triad completely blocked splicing, without affecting assembly of the activated spliceosome or its subsequent conversion into a B*-like complex. Our data suggest that the catalytic configuration of the RNA core that allows catalytic metal M1 binding can be maintained by Protein–RNA contacts. However, RNA stacking interactions in the U2/U6 RNA core are required for productive coordination of metal M2. The functional conformation of the U2/U6 RNA core is thus highly buffered, with overlapping contributions from RNA–RNA and Protein–RNA interactions.

Rearrangements within the U6 snRNA Core during the Transition between the Two Catalytic Steps of Splicing

The RNA catalytic core of spliceosomes as visualized by cryoelectron microscopy (cryo-EM) remains unchanged at different stages of splicing. However, we demonstrate that mutations within the core of yeast U6 snRNA modulate conformational changes between the two catalytic steps. We propose that the intramolecular stem-loop (ISL) of U6 exists in two competing states, changing between a default, non-catalytic conformation and a transient, catalytic conformation. Whereas stable interactions in the catalytic triplex promote catalysis and their disruptions favor exit from the catalytic conformation, destabilization of the lower ISL stem promotes catalysis and its stabilization supports exit from the catalytic conformation. Thus, in addition to the catalytic triplex, U6-ISL acts as an important dynamic component of the catalytic center. The relative flexibility of the lower U6-ISL stem is conserved across eukaryotes. Similar features are found in U6atac and domain V of group II introns, arguing for the generality of the proposed mechanism.

The mechanism of splicing as told by group II introns: Ancestors of the spliceosome

Spliceosomal introns and self-splicing group II introns share a common mechanism of intron splicing where two sequential transesterification reactions remove intron lariats and ligate exons. The recent revolution in cryo-electron microscopy (cryo-EM) has allowed visualization of the spliceosome's ribozyme core. Comparison of these cryo-EM structures to recent group II intron crystal structures presents an opportunity to draw parallels between the RNA active site, substrate positioning, and product formation in these two model systems of intron splicing. In addition to shared RNA architectural features, structural similarity between group II intron encoded proteins (IEPs) and the integral spliceosomal protein Prp8 further support a shared catalytic core. These mechanistic and structural similarities support the long-held assertion that group II introns and the eukaryotic spliceosome have a common evolutionary origin. In this review, we discuss how recent structural insights into group II introns and the spliceosome facilitate the chemistry of splicing, highlight similarities between the two systems, and discuss their likely evolutionary connections. This article is part of a Special Issue entitled: RNA structure and splicing regulation edited by Francisco Baralle, Ravindra Singh and Stefan Stamm.

Group II Intron RNPs and Reverse Transcriptases: From Retroelements to Research Tools

Group II introns, self-splicing retrotransposons, serve as both targets of investigation into their structure, splicing, and retromobility and a source of tools for genome editing and RNA analysis. Here, we describe the first cryo-electron microscopy (cryo-EM) structure determination, at 3.8-4.5 Å, of a group II intron ribozyme complexed with its encoded protein, containing a reverse transcriptase (RT), required for RNA splicing and retromobility. We also describe a method called RIG-seq using a retrotransposon indicator gene for high-throughput integration profiling of group II introns and other retrotransposons. Targetrons, RNA-guided gene targeting agents widely used for bacterial genome engineering, are described next. Finally, we detail thermostable group II intron RTs, which synthesize cDNAs with high accuracy and processivity, for use in various RNA-seq applications and relate their properties to a 3.0-Å crystal structure of the protein poised for reverse transcription. Biological insights from these group II intron revelations are discussed.

Nucleobase carbonyl groups are poor Mg2+ inner-sphere binders but excellent monovalent ion binders-a critical PDB survey

Precise knowledge of Mg²⁺ inner-sphere binding site properties is vital for understanding the structure and function of nucleic acid systems. Unfortunately, the PDB, which represents the main source of Mg²⁺ binding sites, contains a substantial number of assignment issues that blur our understanding of the functions of these ions. Here, following a previous study devoted to Mg²⁺ binding to nucleobase nitrogens, we surveyed nucleic acid X-ray structures from the PDB with resolutions ≤2.9 Å to classify the Mg²⁺ inner-sphere binding patterns to nucleotide carbonyl, ribose hydroxyl, cyclic ether, and phosphodiester oxygen atoms. From this classification, we derived a set of "prior-knowledge" nucleobase Mg²⁺ binding sites. We report that crystallographic examples of trustworthy nucleobase Mg²⁺ binding sites are fewer than expected since many of those are associated with misidentified Na⁺ or K⁺ We also emphasize that binding of Na⁺ and K⁺ to nucleic acids is much more frequent than anticipated. Overall, we provide evidence derived from X-ray structures that nucleobases are poor inner-sphere binders for Mg²⁺ but good binders for monovalent ions. Based on strict stereochemical criteria, we propose an extended set of guidelines designed to help in the assignment and validation of ions directly contacting nucleobase and ribose atoms. These guidelines should help in the interpretation of X-ray and cryo-EM solvent density maps. When borderline Mg²⁺ stereochemistry is observed, alternative placement of Na⁺, K⁺, or Ca²⁺ must be considered. We also critically examine the use of lanthanides (Yb³⁺, Tb³⁺) as Mg²⁺ substitutes in crystallography experiments.

Optimal molecular crowding accelerates group II intron folding and maximizes catalysis

Unlike in vivo conditions, group II intron ribozymes are known to require high magnesium(II) concentrations ([Mg2+]) and high temperatures (42 °C) for folding and catalysis in vitro. A possible explanation for this difference is the highly crowded cellular environment, which can be mimicked in vitro by macromolecular crowding agents. Here, we combined bulk activity assays and single-molecule Förster Resonance Energy Transfer (smFRET) to study the influence of polyethylene glycol (PEG) on catalysis and folding of the ribozyme. Our activity studies reveal that PEG reduces the [Mg2+] required, and we found an "optimum" [PEG] that yields maximum activity. smFRET experiments show that the most compact state population, the putative active state, increases with increasing [PEG]. Dynamic transitions between folded states also increase. Therefore, this study shows that optimal molecular crowding concentrations help the ribozyme not only to reach the native fold but also to increase its in vitro activity to approach that in physiological conditions.

Structural basis for the second step of group II intron splicing

The group II intron and the spliceosome share a common active site architecture and are thought to be evolutionarily related. Here we report the 3.7 Å crystal structure of a eukaryotic group II intron in the lariat-3' exon form, immediately preceding the second step of splicing, analogous to the spliceosomal P complex. This structure reveals the location of the intact 3' splice site within the catalytic core of the group II intron. The 3'-OH of the 5' exon is positioned in close proximity to the 3' splice site for nucleophilic attack and exon ligation. The active site undergoes conformational rearrangements with the catalytic triplex having different configurations before and after the second step of splicing. We describe a complete model for the second step of group II intron splicing that incorporates a dynamic catalytic triplex being responsible for creating the binding pocket for 3' splice site capture.

Influence of pH and Mg(ii) on the catalytic core domain 5 of a bacterial group II intron

RNA molecules fold into complex structures that allow them to perform specific functions. To compensate the relative lack of diversity of functional groups within nucleotides, metal ions work as crucial co-factors. In addition, shifted pK_as are observed in RNA, enabling acid-base reactions at ambient pH. The central catalytic domain 5 (D5) hairpin of the Azotobacter vinelandii group II intron undergoes both metal ion binding and pH dependence, presumably playing an important functional role in the ribozyme's reaction. By NMR spectroscopy we have here characterized the metal ion binding sites and affinities for the hairpin's internal G-A mismatch, bulge, and pentaloop. The influence of Mg(ii) and pH on the local conformation of the catalytically crucial region is also explored by fluorescence spectroscopy.

Group II intron inhibits conjugative relaxase expression in bacteria by mRNA targeting

Group II introns are mobile ribozymes that are rare in bacterial genomes, often cohabiting with various mobile elements, and seldom interrupting housekeeping genes. What accounts for this distribution has not been well understood. Here, we demonstrate that Ll.LtrB, the group II intron residing in a relaxase gene on a conjugative plasmid from Lactococcus lactis, inhibits its host gene expression and restrains the naturally cohabiting mobile element from conjugative horizontal transfer. We show that reduction in gene expression is mainly at the mRNA level, and results from the interaction between exon-binding sequences (EBSs) in the intron and intron-binding sequences (IBSs) in the mRNA. The spliced intron targets the relaxase mRNA and reopens ligated exons, causing major mRNA loss. Taken together, this study provides an explanation for the distribution and paucity of group II introns in bacteria, and suggests a potential force for those introns to evolve into spliceosomal introns.

The Rainbow Spectrum of RNA Secondary Structures

In this paper, we analyze the length spectrum of rainbows in RNA secondary structures. A rainbow in a secondary structure is a maximal arc with respect to the partial order induced by nesting. We show that there is a significant gap in this length spectrum. We shall prove that there asymptotically almost surely exists a unique longest rainbow of length at least [Formula: see text] and that with high probability any other rainbow has finite length. We show that the distribution of the length of the longest rainbow converges to a discrete limit law and that, for finite k, the distribution of rainbows of length k becomes for large n a negative binomial distribution. We then put the results of this paper into context, comparing the analytical results with those observed in RNA minimum free energy structures, biological RNA structures and relate our findings to the sparsification of folding algorithms.

Molecular Mechanism and Evolution of Nuclear Pre-mRNA and Group II Intron Splicing: Insights from Cryo-Electron Microscopy Structures

Nuclear pre-mRNA splicing and group II intron self-splicing both proceed by two-step transesterification reactions via a lariat intron intermediate. Recently determined cryo-electron microscopy (cryo-EM) structures of catalytically active spliceosomes revealed the RNA-based catalytic core and showed how pre-mRNA substrates and reaction products are positioned in the active site. These findings highlight a strong structural similarity to the group II intron active site, strengthening the notion that group II introns and spliceosomes evolved from a common ancestor. Prp8, the largest and most conserved protein in the spliceosome, cradles the active site RNA. Prp8 and group II intron maturase have a similar domain architecture, suggesting that they also share a common evolutionary origin. The interactions between maturase and key group II intron RNA elements, such as the exon-binding loop and domains V and VI, are recapitulated in the interactions between Prp8 and key elements in the spliceosome's catalytic RNA core. Structural comparisons suggest that the extensive RNA scaffold of the group II intron was gradually replaced by proteins as the spliceosome evolved. A plausible model of spliceosome evolution is discussed.