Microfluidic sorting of mammalian cells by optical force switching

An optofluidic system for the concentration gradient screening of oocyte protection drugs

Oocytes protective drug screening is essential for the treatment of reproductive diseases. However, few studies construct the oocyte in vitro drug screening microfluidic systems because of their enormous size, scarcity, and sensitivity to the culture environment. Here, we present an optofluidic system for oocyte drug screening and state analysis. The system consists of two parts: an open-top drug screening microfluidic chip and an optical Fourier filter analysis part. The open-top microfluidic chip anchors single oocyte with hydrogel and allows nutrient and gas environment updating which is essential for oocyte culturing. The optical filter analysis part is used to accurately analyse the status of oocytes. Based on this system, we found that fluorene-9-bisphenol (BHPF) damaged the oocyte spindle in a dose-dependent manner, a high dose of melatonin (10-3 M) effectively reduces the percentage of abnormally arranged chromosomes of oocytes exposed to 40 μM BHPF. This optofluidic system shows great promise for the culture of oocytes and demonstrates the robust ability for convenient multi-concentration oocytes drug screening. This technology may benefit further biomedicine and reproductive toxicology applications in the lab on a chip community.

UV-Catalyzed TiO2-Based Optofluidic SERS Chip for Three Online Strategies: Fabrication, Detection, and Self-Cleaning

We developed an optofluidic surface-enhanced Raman scattering chip capable of online fabrication, online molecular detection, and online self-cleaning. In this chip, we harnessed UV light to successfully reduce an AgNO3 solution, resulting in the formation of Ag nanoparticles on carbon fiber cloth coated with titanium dioxide (TiO2). This innovative approach enabled the online fabrication of AgNPs@TiO2-CFC SERS structures. By introducing target molecules into our optofluidic SERS chip, we achieved online molecular Raman detection. Furthermore, by leveraging the UV light-induced self-cleaning properties of TiO2, we achieved continuous online self-cleaning of the molecules. To verify the feasibility and stability of our method, we conducted multiple experiments for online detection and self-cleaning. Experimental results demonstrated impressively low detection limits of 10-8 mol/L for crystal violet and 10-9 mol/L for rhodamine 6G, with an enhancement factor as high as 1.4 × 106. Additionally, we successfully applied our method to polycyclic aromatic hydrocarbons like pyrene.

A High-Throughput Circular Tumor Cell Sorting Chip with Trapezoidal Cross Section

Circulating tumor cells are typically found in the peripheral blood of patients, offering a crucial pathway for the early diagnosis and prediction of cancer. Traditional methods for early cancer diagnosis are inefficient and inaccurate, making it difficult to isolate tumor cells from a large number of cells. In this paper, a new spiral microfluidic chip with asymmetric cross-section is proposed for rapid, high-throughput, label-free enrichment of CTCs in peripheral blood. A mold of the desired flow channel structure was prepared and inverted to make a trapezoidal cross-section using a micro-nanotechnology process of 3D printing. After a systematic study of how flow rate, channel width, and particle concentration affect the performance of the device, we utilized the device to simulate cell sorting of 6 μm, 15 μm, and 25 μm PS (Polystyrene) particles, and the separation efficiency and separation purity of 25 μm PS particles reached 98.3% and 96.4%. On this basis, we realize the enrichment of a large number of CTCs in diluted whole blood (5 mL). The results show that the separation efficiency of A549 was 88.9% and the separation purity was 96.4% at a high throughput of 1400 μL/min. In conclusion, we believe that the developed method is relevant for efficient recovery from whole blood and beneficial for future automated clinical analysis.

Single-Cell RNA Sequencing in Organ and Cell Transplantation

Single-cell RNA sequencing is a high-throughput novel method that provides transcriptional profiling of individual cells within biological samples. This method typically uses microfluidics systems to uncover the complex intercellular communication networks and biological pathways buried within highly heterogeneous cell populations in tissues. One important application of this technology sits in the fields of organ and stem cell transplantation, where complications such as graft rejection and other post-transplantation life-threatening issues may occur. In this review, we first focus on research in which single-cell RNA sequencing is used to study the transcriptional profile of transplanted tissues. This technology enables the analysis of the donor and recipient cells and identifies cell types and states associated with transplant complications and pathologies. We also review the use of single-cell RNA sequencing in stem cell implantation. This method enables studying the heterogeneity of normal and pathological stem cells and the heterogeneity in cell populations. With their remarkably rapid pace, the single-cell RNA sequencing methodologies will potentially result in breakthroughs in clinical transplantation in the coming years.

Artificial neural network assisted the design of subwavelength-grating waveguides for nanoparticles optical trapping

In this work, we propose artificial neural networks (ANNs) to predict the optical forces on particles with a radius of 50 nm and inverse-design the subwavelength-grating (SWG) waveguides structure for trapping. The SWG waveguides are applied to particle trapping due to their superior bulk sensitivity and surface sensitivity, as well as longer working distance than conventional nanophotonic waveguides. To reduce the time consumption of the design, we train ANNs to predict the trapping forces and to inverse-design the geometric structure of SWG waveguides, and the low mean square errors (MSE) of the networks achieve 2.8 × 10-4. Based on the well-trained forward prediction and inverse-design network, an SWG waveguide with significant trapping performance is designed. The trapping forces in the y-direction achieve-40.39 pN when the center of the particle is placed 100 nm away from the side wall of the silicon segment, and the negative sign of the optical forces indicates the direction of the forces. The maximum trapping potential achieved to 838.16 kBT in the y-direction. The trapping performance in the x and z directions is also quite superior, and the neural network model has been further applied to design SWGs with a high trapping performance. The present work is of significance for further research on the application of artificial neural networks in other optical devices designed for particle trapping.

Magnetophoresis-Enhanced Elasto-Inertial Migration of Microparticles and Cells in Microfluidics

Microfluidic particle and cell manipulation techniques possess many potentials for biomedicine and healthcare. Many techniques have been developed based on active (e.g., electrical, magnetic, acoustic, and thermal) force fields and passive hydrodynamic forces (e.g., inertial and elastic lift forces). However, techniques based on a single active or passive manipulating physics cannot always meet the demands, and combining multiple physics becomes a promising strategy to promote technique flexibility and versatility. In this work, we explored the physical coupling of magnetophoresis with the elastic and inertial (i.e., elasto-inertial) lift forces for the manipulation of microparticles. Particle lateral migration was studied in a coflowing configuration of viscoelastic ferrofluid/water (sample/sheath). The particles were suspended in the viscoelastic ferrofluid and confined near the channel sidewall by a sheath flow. The coordination of magnetophoresis and elasto-inertial lift forces promoted the cross-stream migration of particles. Besides, we investigated the effect of the flow rate ratio and total flow rate on the migration of particles. Furthermore, we also investigated the effects of fluid elasticity in sample and sheath flows on particle migration using different combinations of sample and sheath flows, including Newtonian ferrofluid/water, Newtonian ferrofluid/viscoelastic fluid, and viscoelastic ferrofluid/viscoelastic coflows. Experimental results demonstrated and ascertained the promoted particle lateral migration in the PEO-based ferrofluid/water coflow. Finally, we demonstrate the proof-of-concept application of the physical coupling strategy for cell cross-stream migration and solution exchange. We envisage that this novel multiphysical coupling scheme has great potential for the flexible and versatile manipulation of microparticles and cells.

Nanoparticle Deep-Subwavelength Dynamics Empowered by Optical Meron-Antimeron Topology

Optical meron is a type of nonplanar topological texture mainly observed in surface plasmon polaritons and highly symmetric points of photonic crystals in the reciprocal space. Here, we report Poynting-vector merons formed at the real space of a photonic crystal for a Γ-point illumination. Optical merons can be utilized for subwavelength-resolution manipulation of nanoparticles, resembling a topological Hall effect on electrons via magnetic merons. In particular, staggered merons and antimerons impose strong radiation pressure on large gold nanoparticles (AuNPs), while focused hot spots in antimerons generate dominant optical gradient forces on small AuNPs. Synergistically, differently sized AuNPs in a still environment can be trapped or orbit in opposite directions, mimicking a coupled galaxy system. They can also be separated with a 10 nm precision when applying a flow velocity of >1 mm/s. Our study unravels a novel way to exploit topological textures for optical manipulation with deep-subwavelength precision and switchable topology in a lossless environment.

Yolk-Shell Encapsulation of Cells by Biomimetic Mineralization and Visible Light-Induced Surface Graft Polymerization

The pursuit of low-cytotoxicity modification strategies represents a prominent avenue in cell coating research, holding immense significance for the advancement of practical living cell-related technologies. Here, we presented a novel method to fabricate encapsulated yeast cells with a yolk-shell structure by biomimetic mineralization and visible-light-induced surface graft polymerization. In this approach, an amorphous calcium carbonate (ACC) shell was first deposited on the surface of a yeast cell (cell@ACC) modified with 4 layers of self-assembled poly(diallyl dimethylammonium chloride) (PDADMAC)/poly(acrylic acid) (PAA) film using a biomimetic mineralization technique. Subsequently, polyethylenimine (PEI) was absorbed on the surface of cell@ACC by electrostatic interaction. Then, a cross-linked shell was introduced by surface-initiated graft polymerization of poly(ethylene glycol) diacrylate (PEGDA) on cell@ACC under irradiation of visible light using thioxanthone catechol-O,O'-diacetic acid as the photosensitizer. After the removal of the inner ACC shell, the yolk-shell-structured yeast cells (cell@PHS) were obtained. Due to the mild conditions of the strategy, the cell@PHS could retain 98.81% of its original viability. The introduction of the shell layer significantly prolonged the lag phase of yeast cells, which could be tuned between 5 and 25 h by regulating the thickness of the shell. Moreover, the cell@PHS showed improved resistance against lyticase due to the presence of a protective shell. After 30 days of storage, the viability of cell@PHS was 81.09%, which is significantly higher than the 19.89% viability of native yeast cells.

Visualizing ultrafast photothermal dynamics with decoupled optical force nanoscopy

The photothermal effect in nanomaterials, resulting from resonant optical absorption, finds wide applications in biomedicine, cancer therapy, and microscopy. Despite its prevalence, the photothermal effect in light-absorbing nanoparticles has typically been assessed using bulk measurements, neglecting near-field effects. Beyond standard imaging and therapeutic uses, nanosecond-transient photothermal effects have been harnessed for bacterial inactivation, neural stimulation, drug delivery, and chemical synthesis. While scanning probe microscopy and electron microscopy offer single-particle imaging of photothermal fields, their slow speed limits observations to milliseconds or seconds, preventing nanoscale dynamic investigations. Here, we introduce decoupled optical force nanoscopy (Dofn), enabling nanometer-scale mapping of photothermal forces by exploiting unique phase responses to temporal modulation. We employ the photothermal effect's back-action to distinguish various time frames within a modulation period. This allows us to capture the dynamic photothermal process of a single gold nanorod in the nanosecond range, providing insights into non-stationary thermal diffusion at the nanoscale.

Cell damage evaluation by intelligent imaging flow cytometry

Essential thrombocythemia (ET) is an uncommon situation in which the body produces too many platelets. This can cause blood clots anywhere in the body and results in various symptoms and even strokes or heart attacks. Removing excessive platelets using acoustofluidic methods receives extensive attention due to their high efficiency and high yield. While the damage to the remaining cells, such as erythrocytes and leukocytes is yet evaluated. Existing cell damage evaluation methods usually require cell staining, which are time-consuming and labor-intensive. In this paper, we investigate cell damage by optical time-stretch (OTS) imaging flow cytometry with high throughput and in a label-free manner. Specifically, we first image the erythrocytes and leukocytes sorted by acoustofluidic sorting chip with different acoustic wave powers and flowing speed using OTS imaging flow cytometry at a flowing speed up to 1 m/s. Then, we employ machine learning algorithms to extract biophysical phenotypic features from the cellular images, as well as to cluster and identify images. The results show that both the errors of the biophysical phenotypic features and the proportion of abnormal cells are within 10% in the undamaged cell groups, while the errors are much greater than 10% in the damaged cell groups, indicating that acoustofluidic sorting causes little damage to the cells within the appropriate acoustic power, agreeing well with clinical assays. Our method provides a novel approach for high-throughput and label-free cell damage evaluation in scientific research and clinical settings.

Optofluidic Tweezers: Efficient and Versatile Micro/Nano-Manipulation Tools

Optical tweezers (OTs) can transfer light momentum to particles, achieving the precise manipulation of particles through optical forces. Due to the properties of non-contact and precise control, OTs have provided a gateway for exploring the mysteries behind nonlinear optics, soft-condensed-matter physics, molecular biology, and analytical chemistry. In recent years, OTs have been combined with microfluidic chips to overcome their limitations in, for instance, speed and efficiency, creating a technology known as "optofluidic tweezers." This paper describes static OTs briefly first. Next, we overview recent developments in optofluidic tweezers, summarizing advancements in capture, manipulation, sorting, and measurement based on different technologies. The focus is on various kinds of optofluidic tweezers, such as holographic optical tweezers, photonic-crystal optical tweezers, and waveguide optical tweezers. Moreover, there is a continuing trend of combining optofluidic tweezers with other techniques to achieve greater functionality, such as antigen-antibody interactions and Raman tweezers. We conclude by summarizing the main challenges and future directions in this research field.

Nanomechanical hydrodynamic force sensing using suspended microfluidic channels

Microfluidics has demonstrated high versatility in the analysis of in-flow particles and can even achieve mechanical properties measurements of biological cells by applying hydrodynamic forces. However, there is currently no available technique that enables the direct measurement and tracking of these hydrodynamic forces acting on a flowing particle. In this work, we introduce a novel method for the direct measurement of the hydrodynamic force actuating on an in-flow particle based on the analysis of the induced resonance changes of suspended microchannel resonators (SMRs). This hydrodynamic force sensitivity depends on the device used; therefore, we considered the geometry and materials to advance this dependency on the SMR resonance frequency.

Novel size-based design of spiral microfluidic devices with elliptic configurations and trapezoidal cross-section for ultra-fast isolation of circulating tumor cells

Investigation and analysis of circulating tumor cells (CTCs) have been valuable resources for detecting and diagnosing cancer in its early stages. Recently, enumeration and separation of CTCs via microfluidic devices have attracted significant attention due to their low cost and easy setup. In this study, novel microfluidic devices based on size-dependent cell-sorting with a trapezoidal cross-section and elliptic spiral configurations were proposed to reach label-free, ultra-fast CTCs enrichment. Firstly, the possibility and quality of separation in the devices were evaluated via a numerical simulation. Subsequently, these devices were fabricated to investigate the effects of the altering curvature and the trapezoidal cross-section on the isolation of CTCs from the peripheral blood sample at varying flow rates ranging from 0.5 mL/min to 3.5 mL/min. The experimental results indicated that the flow rate of 2.5 mL/min provided the optimal separation efficiency in the proposed devices, which was in fine agreement with the numerical analysis results. In this experiment, the purity values of CTCs between 88% and 90% were achieved, which is an indicator of the high capability of the proposed devices for the isolation and enrichment of CTCs. This strategy is hoped to overcome the limitations of classical affinity-based CTC separation approaches in the future.

Optical trapping with holographically structured light for single-cell studies

A groundbreaking work in 1970 by Arthur Ashkin paved the way for developing various optical trapping techniques. Optical tweezers have become an established method for the manipulation of biological objects, due to their noninvasiveness and precise controllability. Recent innovations are accelerating and now enable single-cell manipulation through holographic light structuring. In this review, we provide an overview of recent advances in optical tweezer techniques for studies at the individual cell level. Our review focuses on holographic optical tweezers that utilize active spatial light modulators to noninvasively manipulate live cells. The versatility of the technology has led to valuable integrations with microscopy, microfluidics, and biotechnological techniques for various single-cell studies. We aim to recapitulate the basic principles of holographic optical tweezers, highlight trends in their biophysical applications, and discuss challenges and future prospects.

Graphene-based optofluidic tweezers for refractive-index and size-based nanoparticle sorting, manipulation, and detection

This work proposes a novel design composed of graphene nanoribbons-based optofluidic tweezers to manipulate and sort bio-particles with radii below 2.5 nm. The suggested structure has been numerically investigated by the finite difference time domain (FDTD) method employing Maxwell's stress tensor analysis (MST). The finite element method (FEM) has been used to obtain the electrostatic response of the proposed structure. The tweezer main path is a primary channel in the center of the structure, where the microfluidic flow translates the nanoparticle toward this channel. Concerning the microfluid's drag force, the nanoparticles tend to move along the length of the main channel. The graphene nanoribbons are fixed near the main channel at different distances to exert optical forces on the moving nanoparticles in the perpendicular direction. In this regard, sub-channels embedding in the hBN layer on the Si substrate deviate bio-particles from the main path for particular nanoparticle sizes and indices. Intense hotspots with electric field enhancements up to 900 times larger than the incident light are realized inside and around the graphene ribbons. Adjusting the gap distance between the graphene nanoribbon and the main channel allows us to separate the individual particle with a specific size from others, thus guiding that in the desired sub-channel. Furthermore, we demonstrated that in a structure with a large gap between channels, particles experience weak field intensity, leading to a low optical force that is insufficient to detect, trap, and manipulate nanoparticles. By varying the chemical potential of graphene associated with the electric field intensity variations in the graphene ribbons, we realized tunability in sorting nanoparticles while structural parameters remained constant. In fact, by adjusting the graphene Fermi level via the applied gate voltage, nanoparticles with any desired radius will be quickly sorted. Moreover, we exhibited that the proposed structure could sort nanoparticles based on their refractive indices. Therefore, the given optofluidic tweezer can easily detect bio-particles, such as cancer cells and viruses of tiny size.

Image-based cell sorting using focused travelling surface acoustic waves

Sorting cells is an essential primary step in many biological and clinical applications such as high-throughput drug screening, cancer research and cell transplantation. Cell sorting based on their mechanical properties has long been considered as a promising label-free biomarker that could revolutionize the isolation of cells from heterogeneous populations. Recent advances in microfluidic image-based cell analysis combined with subsequent label-free sorting by on-chip actuators demonstrated the possibility of sorting cells based on their physical properties. However, the high purity of sorting is achieved at the expense of a sorting rate that lags behind the analysis throughput. Furthermore, stable and reliable system operation is an important feature in enabling the sorting of small cell fractions from a concentrated heterogeneous population. Here, we present a label-free cell sorting method, based on the use of focused travelling surface acoustic wave (FTSAW) in combination with real-time deformability cytometry (RT-DC). We demonstrate the flexibility and applicability of the method by sorting distinct blood cell types, cell lines and particles based on different physical parameters. Finally, we present a new strategy to sort cells based on their mechanical properties. Our system enables the sorting of up to 400 particles per s. Sorting is therefore possible at high cell concentrations (up to 36 million per ml) while retaining high purity (>92%) for cells with diverse sizes and mechanical properties moving in a highly viscous buffer. Sorting of small cell fraction from a heterogeneous population prepared by processing of small sample volume (10 μl) is also possible and here demonstrated by the 667-fold enrichment of white blood cells (WBCs) from raw diluted whole blood in a continuous 10-hour sorting experiment. The real-time analysis of multiple parameters together with the high sensitivity and high-throughput of our method thus enables new biological and therapeutic applications in the future.

Integrating Micro and Nano Technologies for Cell Engineering and Analysis: Toward the Next Generation of Cell Therapy Workflows

The emerging field of cell therapy offers the potential to treat and even cure a diverse array of diseases for which existing interventions are inadequate. Recent advances in micro and nanotechnology have added a multitude of single cell analysis methods to our research repertoire. At the same time, techniques have been developed for the precise engineering and manipulation of cells. Together, these methods have aided the understanding of disease pathophysiology, helped formulate corrective interventions at the cellular level, and expanded the spectrum of available cell therapeutic options. This review discusses how micro and nanotechnology have catalyzed the development of cell sorting, cellular engineering, and single cell analysis technologies, which have become essential workflow components in developing cell-based therapeutics. The review focuses on the technologies adopted in research studies and explores the opportunities and challenges in combining the various elements of cell engineering and single cell analysis into the next generation of integrated and automated platforms that can accelerate preclinical studies and translational research.

Optical Force of Bessel Pincer Light-Sheets Beam on a Dielectric Sphere of Arbitrary Size

In the framework of Generalized Lorenz-Mie theory (GLMT), based on the expansion results of electromagnetic field radiation components of Bessel pincer light sheets beam acting on dielectric particles of arbitrary size, the expression of radiation force components in a Cartesian coordinate system is obtained by using the Maxwell stress tensor method. On the one hand, the effects of the refractive index and the equivalent radius of spherical particles on the distribution of radiation force are discussed; On the other hand, the influence of beam scaling parameter and beam order of Bessel pincer light sheets beam on the distribution of radiation force are investigated. The results indicate that the changes of particle's refractive index and effective radius only affect the distribution of radiation force. However, the beam scaling parameter and beam order of Bessel pincer light sheets beam have a very sharp impact on the convergence position, distribution range and bending degree far away from the wave source of the radiation force. Single-beam optical tweezers using the self-focusing and self-bending Bessel pincer light-sheets beam are crucial for applications such as single molecule biophysics, optical manipulation and particle separation/clearing.

Optical pulling and pushing forces via Bloch surface waves

For flexible tailoring of optical forces, as well as for extraordinary optomechanical effects, additional degrees of freedom should be introduced into a system. Here, we demonstrate that photonic crystals are a versatile platform for optical manipulation due to both Bloch surface waves (BSWs) and the complex character of the reflection coefficient paving a way for controlled optomechanical interactions. We demonstrate enhanced pulling and pushing transversal optical forces acting on a single dipolar bead above a one-dimensional photonic crystal due to directional excitation of BSWs. Our results demonstrate angle- or wavelength-assisted switching between BSW-induced optical pulling and pushing forces. Easy to fabricate for any desired spectral range, photonic crystals are shown to be prospective for precise optical sorting of nanoparticles, which are difficult to sort with conventional optomechanical methods. Our approach opens opportunities for novel, to the best of our knowledge, optical manipulation schemes and platforms, and enhanced light-matter interaction in optical trapping setups.

Single cell sorting of young yeast based on label-free fluorescence lifetime imaging microscopy

Saccharomyces cerevisiae is an attractive organism used in the fermentation industry and is an important model organism for virus research. The ability to sort yeast cells is important for diverse applications. Replicative aging of Saccharomyces Cerevisiae is accompanied by metabolic changes that are related to an essential coenzyme, reduced nicotinamide adenine dinucleotide (phosphate) (NAD(P)H). Here, a single cell sorting method based on fluorescence lifetime imaging microscopy (FLIM) and laser-induced forward transfer (LIFT) was implemented for the first time. The aging level of yeast was determined based on the FLIM by NAD(P)H, which was a label-free and noninvasive method for studying individual cells. Then, young and active yeast cells were sorted by the LIFT system at the single cell level. During the entire experiment, a sterile and humid environment was maintained to ensure the activity of cells. The high viability of sorted cells was achieved by the LIFT combining with FLIM.

On-chip trapping and sorting of nanoparticles using a single slotted photonic crystal nanobeam cavity

In this work, we propose a slotted photonic crystal nanobeam cavity (PCNC) to trap and sort the 120 nm and 30 nm nanoparticles. The simulation shows that the maximum optical trapping force of the 120 nm particle is 38.7 pN/mW, and that of the 30 nm particle is 10.8 pN/mW. It is calculated that the trapping threshold power of the 120 nm particle is 35.3 µW, and that of the 30 nm particle is 41.6 µW. Because the width of the slot is 100 nm, when the input power is between 35.3 µW and 41.6 µW, only the 120 nm particle can be trapped in the upper cladding of the slotted-PCNC. When the input power is greater than 41.6 µW, the 120 nm particle is still trapped in the upper cladding of the slotted-PCNC, while the 30 nm particle is trapped inside the slot of the slotted-PCNC. By properly controlling the input power and the direction of flow in the microfluidic channel, the sorting of particles can be achieved. In addition, trapping of the particles causes different redshifts of peak wavelengths. Thus, the proposed slotted-PCNC can detect particle trapping and sorting by monitoring the resonant wavelength shifts. What is the most important, compared with previous reported single particle trapping work, is that the proposed work can realize both trapping and sorting. Therefore, provided with the ultra-compact footprint and excellent performance, the proposed slotted-PCNC shows great potential for a multifunctional lab-on-a-chip system.

Advances in automated real-time flow cytometry for monitoring of bioreactor processes

Flow cytometry and its technological possibilities have greatly advanced in the past decade as analysis tool for single cell properties and population distributions of different cell types in bioreactors. Along the way, some solutions for automated real-time flow cytometry (ART-FCM) were developed for monitoring of bioreactor processes without operator interference over extended periods with variable sampling frequency. However, there is still great potential for ART-FCM to evolve and possibly become a standard application in bioprocess monitoring and process control. This review first addresses different components of an ART-FCM, including the sampling device, the sample-processing unit, the unit for sample delivery to the flow cytometer and the settings for measurement of pre-processed samples. Also, available algorithms are presented for automated data analysis of multi-parameter fluorescence datasets derived from ART-FCM experiments. Furthermore, challenges are discussed for integration of fluorescence-activated cell sorting into an ART-FCM setup for isolation and separation of interesting subpopulations that can be further characterized by for instance omics-methods. As the application of ART-FCM is especially of interest for bioreactor process monitoring, including investigation of population heterogeneity and automated process control, a summary of already existing setups for these purposes is given. Additionally, the general future potential of ART-FCM is addressed.

Advances and enabling technologies for phase-specific cell cycle synchronisation

Cell cycle synchronisation is the process of isolating cell populations at specific phases of the cell cycle from heterogeneous, asynchronous cell cultures. The process has important implications in targeted gene-editing and drug efficacy of cells and in studying cell cycle events and regulatory mechanisms involved in the cell cycle progression of multiple cell species. Ideally, cell cycle synchrony techniques should be applicable for all cell types, maintain synchrony across multiple cell cycle events, maintain cell viability and be robust against metabolic and physiological perturbations. In this review, we categorize cell cycle synchronisation approaches and discuss their operational principles and performance efficiencies. We highlight the advances and technological development trends from conventional methods to the more recent microfluidics-based systems. Furthermore, we discuss the opportunities and challenges for implementing high throughput cell synchronisation and provide future perspectives on synchronisation platforms, specifically hybrid cell synchrony modalities, to allow the highest level of phase-specific synchrony possible with minimal alterations in diverse types of cell cultures.

Emerging microfluidics-enabled platforms for osteoarthritis management: from benchtop to bedside

Osteoarthritis (OA) is a prevalent debilitating age-related joint degenerative disease. It is a leading cause of pain and functional disability in older adults. Unfortunately, there is no cure for OA once the damage is established. Therefore, it promotes an urgent need for early detection and intervention of OA. Theranostics, combining therapy and diagnosis, emerges as a promising approach for OA management. However, OA theranostics is still in its infancy. Three fundamental needs have to be firstly fulfilled: i) a reliable OA model for disease pathogenesis investigation and drug screening, ii) an effective and precise diagnostic platform, and iii) an advanced fabrication approach for drug delivery and therapy. Meanwhile, microfluidics emerges as a versatile technology to address each of the needs and eventually boost the development of OA theranostics. Therefore, this review focuses on the applications of microfluidics, from benchtop to bedside, for OA modelling and drug screening, early diagnosis, and clinical therapy. We first introduce the basic pathophysiology of OA and point out the major unfilled research gaps in current OA management including lack of disease modelling and drug screening platforms, early diagnostic modalities and disease-modifying drugs and delivery approaches. Accordingly, we then summarize the state-of-the-art microfluidics technology for OA management from in vitro modelling and diagnosis to therapy. Given the existing promising results, we further discuss the future development of microfluidic platforms towards clinical translation at the crossroad of engineering and biomedicine.

Gravity-Driven Microfluidic Siphons: Fluidic Characterization and Application to Quantitative Immunoassays

A range of biosensing techniques including immunoassays are routinely used for quantitation of analytes in biological samples and available in a range of formats, from centralized lab testing (e.g., microplate enzyme-linked immunosorbent assay (ELISA)) to automated point-of-care (POC) and lateral flow immunochromatographic tests. High analytical performance is intrinsically linked to the use of a sequence of reagent and washing steps, yet this is extremely challenging to deliver at the POC without a high level of fluidic control involving, e.g., automation, fluidic pumping, or manual fluid handling/pipetting. Here we introduce a microfluidic siphon concept that conceptualizes a multistep ″dipstick″ for quantitative, enzymatically amplified immunoassays using a strip of microporous or microbored material. We demonstrated that gravity-driven siphon flow can be realized in single-bore glass capillaries, a multibored microcapillary film, and a glass fiber porous membrane. In contrast to other POC devices proposed to date, the operation of the siphon is only dependent on the hydrostatic liquid pressure (gravity) and not capillary forces, and the unique stepwise approach to the delivery of the sample and immunoassay reagents results in zero dead volume in the device, no reagent overlap or carryover, and full start/stop fluid control. We demonstrated applications of a 10-bore microfluidic siphon as a portable ELISA system without compromised quantitative capabilities in two global diagnostic applications: (1) a four-plex sandwich ELISA for rapid smartphone dengue serotype identification by serotype-specific dengue virus NS1 antigen detection, relevant for acute dengue fever diagnosis, and (2) quantitation of anti-SARS-CoV-2 IgG and IgM titers in spiked serum samples. Diagnostic siphons provide the opportunity for high-performance immunoassay testing outside sophisticated laboratories, meeting the rapidly changing global clinical and public health needs.

The Rise of the OM-LoC: Opto-Microfluidic Enabled Lab-on-Chip

The integration of optical circuits with microfluidic lab-on-chip (LoC) devices has resulted in a new era of potential in terms of both sample manipulation and detection at the micro-scale. On-chip optical components increase both control and analytical capabilities while reducing reliance on expensive laboratory photonic equipment that has limited microfluidic development. Notably, in-situ LoC devices for bio-chemical applications such as diagnostics and environmental monitoring could provide great value as low-cost, portable and highly sensitive systems. Multiple challenges remain however due to the complexity involved with combining photonics with micro-fabricated systems. Here, we aim to highlight the progress that optical on-chip systems have made in recent years regarding the main LoC applications: (1) sample manipulation and (2) detection. At the same time, we aim to address the constraints that limit industrial scaling of this technology. Through evaluating various fabrication methods, material choices and novel approaches of optic and fluidic integration, we aim to illustrate how optic-enabled LoC approaches are providing new possibilities for both sample analysis and manipulation.

Microfluidics as a Novel Technique for Tuberculosis: From Diagnostics to Drug Discovery

Tuberculosis (TB) remains a global healthcare crisis, with an estimated 5.8 million new cases and 1.5 million deaths in 2020. TB is caused by infection with the major human pathogen Mycobacterium tuberculosis, which is difficult to rapidly diagnose and treat. There is an urgent need for new methods of diagnosis, sufficient in vitro models that capably mimic all physiological conditions of the infection, and high-throughput drug screening platforms. Microfluidic-based techniques provide single-cell analysis which reduces experimental time and the cost of reagents, and have been extremely useful for gaining insight into monitoring microorganisms. This review outlines the field of microfluidics and discusses the use of this novel technique so far in M. tuberculosis diagnostics, research methods, and drug discovery platforms. The practices of microfluidics have promising future applications for diagnosing and treating TB.

Simulating microgravity using a random positioning machine for inducing cellular responses to mechanotransduction in human osteoblasts

The mechanotransduction pathways that mediate cellular responses to contact forces are better understood than those that mediate response to distance forces, especially the force of gravity. Removing or reducing gravity for significant periods of time involves either sending samples to space, inducing diamagnetic levitation with high magnetic fields, or continually reorienting samples for a period, all in a manner that supports cell culturing. Undesired secondary effects due to high magnetic fields or shear forces associated with fluid flow while reorienting must be considered in the design of ground-based devices. We have developed a lab-friendly and compact random positioning machine (RPM) that fits in a standard tissue culture incubator. Using a two-axis gimbal, it continually reorients samples in a manner that produces an equal likelihood that all possible orientations are visited. We contribute a new control algorithm by which the distribution of probabilities over all possible orientations is completely uniform. Rather than randomly varying gimbal axis speed and/or direction as in previous algorithms (which produces non-uniform probability distributions of orientation), we use inverse kinematics to follow a trajectory with a probability distribution of orientations that is uniform by construction. Over a time period of 6 h of operation using our RPM, the average gravity is within 0.001 23% of the gravity of Earth. Shear forces are minimized by limiting the angular speed of both gimbal motors to under 42 °/s. We demonstrate the utility of our RPM by investigating the effects of simulated microgravity on adherent human osteoblasts immediately after retrieving samples from our RPM. Cytoskeletal disruption and cell shape changes were observed relative to samples cultured in a 1 g environment. We also found that subjecting human osteoblasts in suspension to simulated microgravity resulted in less filamentous actin and lower cell stiffness.

Precise Microfluidic Luminescent Sensor Platform with Controlled Injection System

Efforts have been devoted to screening various prevalent diseases, such as severe acute respiratory syndrome (SARS) and coronavirus disease 2019 (COVID-19). Real-time polymerase chain reaction (RT-PCR), which is currently the most widely used, has high accuracy, but it requires several facilities and takes a relatively long time to check; so, new testing technology is necessary for a higher test efficiency. A chemiluminescence (CL) sensor is a relatively simple device and suitable as an alternative because it can detect very precise specimens. However, in measurements via CL, the quantitative formulation of reagents that cause color development is important. In the case of mixing using micropipettes, precise analysis is possible, but this technique is limited by uncontrollable errors or deviations in detection amounts. In addition, in using a microfluidic chip to increase field applicability, a syringe pump or other quantification injection tools are required, so problems must be overcome for practical use. Therefore, in this study, a microchip was designed and manufactured to supply a sample of a certain volume by simply blowing air and injecting a sample into the chamber. By utilizing the luminescence reaction of luminol, CuSO4 and H2O2 the performance of the prepared chip was confirmed, and the desired amount of the sample could be injected with a simple device with an error rate of 2% or less. For feasible applications, an experiment was performed to quantitatively analyze thrombin, a biomarker of heart disease. Results demonstrated that biomarkers could be more precisely detected using the proposed microchips than using micropipettes.

Light-induced micro-vibrator with controllable amplitude and frequency

We propose and demonstrate a light-induced micro-vibrator that can perform an adjustable reciprocating vibration based on the Δα-typed photophoretic force. The vibration amplitudes and periods can be precisely controlled and modulated in real-time, and the maximum average restoring speed is as high as 23.26 μm/s. In addition, by using the self-healing properties of the Bessel-like beam, we achieve the simultaneous driving and modulating of three absorbing micro-vibrators. The proposed absorbing micro-vibrator can be used as a novel light-driven micromotor, which is considered to have potential application value in the field of targeted drug delivery, biosensing, and environmental detection.

3D printed microfluidic lab-on-a-chip device for fiber-based dual beam optical manipulation

3D printing of microfluidic lab-on-a-chip devices enables rapid prototyping of robust and complex structures. In this work, we designed and fabricated a 3D printed lab-on-a-chip device for fiber-based dual beam optical manipulation. The final 3D printed chip offers three key features, such as (1) an optimized fiber channel design for precise alignment of optical fibers, (2) an optically clear window to visualize the trapping region, and (3) a sample channel which facilitates hydrodynamic focusing of samples. A square zig–zag structure incorporated in the sample channel increases the number of particles at the trapping site and focuses the cells and particles during experiments when operating the chip at low Reynolds number. To evaluate the performance of the device for optical manipulation, we implemented on-chip, fiber-based optical trapping of different-sized microscopic particles and performed trap stiffness measurements. In addition, optical stretching of MCF-7 cells was successfully accomplished for the purpose of studying the effects of a cytochalasin metabolite, pyrichalasin H, on cell elasticity. We observed distinct changes in the deformability of single cells treated with pyrichalasin H compared to untreated cells. These results demonstrate that 3D printed microfluidic lab-on-a-chip devices offer a cost-effective and customizable platform for applications in optical manipulation.

Methods of Generating Dielectrophoretic Force for Microfluidic Manipulation of Bioparticles

Manipulation of microscale bioparticles including living cells is of great significance to the broad bioengineering and biotechnology fields. Dielectrophoresis (DEP), which is defined as the interactions between dielectric particles and the electric field, is one of the most widely used techniques for the manipulation of bioparticles including cell separation, sorting, and trapping. Bioparticles experience a DEP force if they have a different polarization from the surrounding media in an electric field that is nonuniform in terms of the intensity and/or phase of the electric field. A comprehensive literature survey shows that the DEP-based microfluidic devices for manipulating bioparticles can be categorized according to the methods of creating the nonuniformity via patterned microchannels, electrodes, and media to generate the DEP force. These methods together with the theory of DEP force generation are described in this review, to provide a summary of the methods and materials that have been used to manipulate various bioparticles for various specific biological outcomes. Further developments of DEP-based technologies include identifying materials that better integrate with electrodes than current popular materials (silicone/glass) and improving the performance of DEP manipulation of bioparticles by combining it with other methods of handling bioparticles. Collectively, DEP-based microfluidic manipulation of bioparticles holds great potential for various biomedical applications.

Mattertronics for programmable manipulation and multiplex storage of pseudo-diamagnetic holes and label-free cells

Manipulating and separating single label-free cells without biomarker conjugation have attracted significant interest in the field of single-cell research, but digital circuitry control and multiplexed individual storage of single label-free cells remain a challenge. Herein, by analogy with the electrical circuitry elements and electronical holes, we develop a pseudo-diamagnetophoresis (PsD) mattertronic approach in the presence of biocompatible ferrofluids for programmable manipulation and local storage of single PsD holes and label-free cells. The PsD holes conduct along linear negative micro-magnetic patterns. Further, eclipse diode patterns similar to the electrical diode can implement directional and selective switching of different PsD holes and label-free cells based on the diode geometry. Different eclipse heights and junction gaps influence the switching efficiency of PsD holes for mattertronic circuitry manipulation and separation. Moreover, single PsD holes are stored at each potential well as in an electrical storage capacitor, preventing multiple occupancies of PsD holes in the array of individual compartments due to magnetic Coulomb-like interaction. This approach may enable the development of large programmable arrays of label-free matters with high throughput, efficiency, and reliability as multiplex cell research platforms.

Micro-scale technologies propel biology and medicine

Historically, technology has been central to new discoveries in biology and progress in medicine. Among various technologies, microtechnologies, in particular, have had a prominent role in the revolution experienced by the life sciences in the last few decades, which will surely continue in the years to come. In this Perspective, we illustrate how microtechnologies, with a focus on microfluidics, have evolved in trends/waves to tackle the boundary of knowledge in the life sciences. We provide illustrative examples of technology-enabled biological breakthroughs and their current and future use in clinics. Finally, we take a closer look at the translational process to understand why the incorporation of new micro-scale technologies in medicine has been comparatively slow so far.

A polymer-film inertial microfluidic sorter fabricated by jigsaw puzzle method for precise size-based cell separation

A polymer-film inertial microfluidic jigsaw (PIMJ) sorter with trapezoidal spiral channels using the jigsaw puzzle method was proposed to realize precise and high-throughput rare cell separation. The PIMJ sorter was fabricated by assembling laser-patterned polymer-film layers of different thicknesses. After illustrating the conceptual design and fabrication process, the effects of the cross-sectional dimension, particle size, and operational flow rate on particle focusing were systematically explored under a broad flow rate range. Then, the separation performances of the PIMJ sorter were characterized using the binary particle mixture and the blood samples spiked with four types of tumor cells. The results indicated that the complete separation of the binary particles with a minimum size difference of 2 μm was successfully realized at a high throughput up to 3000 μL/min. A high recovery ratio of 90.57%-94.14% and a high purity of 48.67%-79.05% were achieved for the separation of rare tumor cells from white blood cells (WBCs). Finally, the PIMJ sorter was successfully employed for separating rare circulating tumor cells (CTCs) from the metastatic breast and lung cancer patients with a capture ratio of 7-226 CTCs per 5 mL sample. The results proved the high sensitivity and high reliability of the PIMJ sorter. The PIMJ sorter is expected to be a potential device for precise CTC separation towards the clinical applications.

An optomicrofluidic device for the detection and isolation of drop-encapsulated target cells in single-cell format

Single-cell analysis has emerged as a powerful method for genomics, transcriptomics, proteomics, and metabolomics characterisation at the individual cell level. Here, we demonstrate a technique for the detection and selective isolation of target cells encapsulated in microdroplets in single-cell format. A sample containing a mixed population of cells with fluorescently labelled target cells can be focused using a sheath fluid to direct cells in single file toward a droplet junction, wherein the cells are encapsulated inside droplets. The droplets containing the cells migrate toward the centre of the channel owing to non-inertial lift force. The cells present in the droplets are studied and characterised based on forward scatter (FSC), side scatter (SSC), and fluorescence (FL) signals. The FL signals from the target cells can be used to activate a selective isolation module based on electro-coalescence, using suitable electronics and a program to sort droplets containing the target cells in single-cell format from droplets containing background cells. We demonstrated the detection and isolation of target cells (cancer cells: HeLa and DU145) from mixed populations of cells, peripheral blood mononuclear cells (PBMC) + cervical cancer cells (HeLa) and PBMC + human prostate cancer cells (DU145), at a concentration range of 104-106 ml-1 at 300 cells per s. The performance of the device is characterised in terms of sorting efficiency (>97%), enrichment (>1800×), purity (>98%), and recovery (>95%). The sorted target cells were found to be viable (>95% viability) and showed good proliferation when cultured, showing the potential of the proposed sorting technique for downstream analysis.

Effect of Varying Expression of EpCAM on the Efficiency of CTCs Detection by SERS-Based Immunomagnetic Optofluidic Device

Simple Summary

In this work we present a magnetically supported SERS-based immunoassay based on solid SERS-active support for the detection of circulating tumor cells. The SERS response in our optofluidic device was correlated with the level of EpCAM expression. The level of EpCAM cell expression in four cell lines with relatively high (human metastatic prostate adenocarcinoma cells (LNCaP)), medium (human metastatic prostate adenocarcinoma cells (LNCaP)), weak (human metastatic prostate adenocarcinoma cells (LNCaP)), and no EpCAM expressions (cervical cancer cells (HeLa) has been estimated using Western Blot method supported by immunochemistry and correlated with responses of immunomagnetic SERS-based analysis. The capture efficiency of developed assay was investigated in metastatic lung cancer patients. The assay demonstrates the capability to detect circulating tumor cells from blood samples over a broad linear range (from 1 to 100 cells/mL) reflecting clinically relevant amount of CTCs depending on the stage of metastasis, age, applied therapy.

Abstract

The circulating tumor cells (CTCs) isolation and characterization has a great potential for non-invasive biopsy. In the present research, the surface–enhanced Raman spectroscopy (SERS)-based assay utilizing magnetic nanoparticles and solid SERS-active support integrated in the external field assisted microfluidic device was designed for efficient isolation of CTCs from blood samples. Magnetic nanospheres (Fe₂O₃) were coated with SERS-active metal and then modified with p-mercaptobenzoic acid (p-MBA) which works simultaneously as a Raman reporter and linker to an antiepithelial-cell-adhesion-molecule (anti-EpCAM) antibodies. The newly developed laser-induced SERS-active silicon substrate with a very strong enhancement factor (up to 10⁸) and high stability and reproducibility provide the additional extra-enhancement in the sandwich plasmonic configuration of immune assay which finally leads to increase the efficiency of detection. The sensitive immune recognition of cancer cells is assisted by the introducing of the controllable external magnetic field into the microfluidic chip. Moreover, the integration of the SERS-active platform and p-MBA-labeled immuno-Ag@Fe₂O₃ nanostructures with microfluidic device offers less sample and analytes demand, precise operation, increase reproducibly of spectral responses, and enables miniaturization and portability of the presented approach. In this work, we have also investigated the effect of varying expression of the EpCAM established by the Western Blot method supported by immunochemistry on the efficiency of CTCs’ detection with the developed SERS method. We used four target cancer cell lines with relatively high (human metastatic prostate adenocarcinoma cells (LNCaP)), medium (human metastatic prostate adenocarcinoma cells (LNCaP)), weak (human metastatic prostate adenocarcinoma cells (LNCaP)), and no EpCAM expressions (cervical cancer cells (HeLa)) to estimate the limits of detection based on constructed calibration curves. Finally, blood samples from lung cancer patients were used to validate the efficiency of the developed method in clinical trials.

Particle size effect on sorting with optical lattice

Transport of mesoscale particles due to driving flow fields or external forces on a periodic surface appears in many areas. Geometrical and physical characteristics of particles affect the velocities of the particles in these periodic landscapes. In this paper, we present a numerical simulation based on solving the Langevin equation for the meso-size particles subjected to the thermal fluctuations in a periodic array of optical traps. We consider the real-size particles which cause the partial trapping of particles in the optical traps. The particles are sorted for the size-dependency of particles' trajectories. Our results are in good agreement with experiments.

Detection and isolation of free cancer cells from ascites and peritoneal lavages using optically induced electrokinetics (OEK)

Detection of free gastric cancer cells in peritoneal lavages and ascites plays a vital role in gastric cancer. However, due to the low content of cancer cells in patients' peritoneal lavages, traditional detection methods lack sensitivity and cannot satisfy clinical demand. In this study, we used an optically induced electrokinetics (OEK) microfluidic method for label-free separation and characterization of patient gastric cancer cells. This method showed high effectiveness and sensitivity. We successfully separated cancer cells from a simulated peritoneal lavage mixture of gastric cancer cell lines and peritoneal lavage cells in a ratio of 1:1000. We further separated gastric cancer cells from six patients' ascites with purity up to 71%. In addition, we measured the cell membrane capacitances, which may be used as a biomarker for gastric cancer cells. Thus, our method can be used to effectively and rapidly detect peritoneal metastasis and to acquire cellular electrical information.

Analytical Guidelines for Designing Curvature-Induced Dielectrophoretic Particle Manipulation Systems

Curvature-induced dielectrophoresis (C-iDEP) is an established method of applying electrical energy gradients across curved microchannels to obtain a label-free manipulation of particles and cells. This method offers several advantages over the other DEP-based methods, such as increased chip area utilisation, simple fabrication, reduced susceptibility to Joule heating and reduced risk of electrolysis in the active region. Although C-iDEP systems have been extensively demonstrated to achieve focusing and separation of particles, a detailed mathematical analysis of the particle dynamics has not been reported yet. This work computationally confirms a fully analytical dimensionless study of the electric field-induced particle motion inside a circular arc microchannel, the simplest design of a C-iDEP system. Specifically, the analysis reveals that the design of a circular arc microchannel geometry for manipulating particles using an applied voltage is fully determined by three dimensionless parameters. Simple equations are established and numerically confirmed to predict the mutual relationships of the parameters for a comprehensive range of their practically relevant values, while ensuring design for safety. This work aims to serve as a starting point for microfluidics engineers and researchers to have a simple calculator-based guideline to develop C-iDEP particle manipulation systems specific to their applications.

Microfluidic platform for 3D cell culture with live imaging and clone retrieval

Combining live imaging with the ability to retrieve individual cells of interest remains a technical challenge. Combining imaging with precise cell retrieval is of particular interest when studying highly dynamic or transient, asynchronous, or heterogeneous cell biological and developmental processes. Here, we present a method to encapsulate live cells in a 3D hydrogel matrix, via hydrogel bead compartmentalisation. Using a small-scale screen, we optimised matrix conditions for the culture and multilineage differentiation of mouse embryonic stem cells. Moreover, we designed a custom microfluidic platform that is compatible with live imaging. With this platform we can long-term culture and subsequently extract individual cells-in-beads by media flow only, obviating the need for enzymatic cell removal from the platform. Specific beads may be extracted from the platform in isolation, without disrupting the adjacent beads. We show that we can differentiate mouse embryonic stem cells, monitor reporter expression by live imaging, and retrieve individual beads for functional assays, correlating reporter expression with functional response. Overall, we present a highly flexible 3D cell encapsulation and microfluidic platform that enables both monitoring of cellular dynamics and retrieval for molecular and functional assays.

Optical Potential-Well Array for High-Selectivity, Massive Trapping and Sorting at Nanoscale

Optical tweezers are versatile tools capable of sorting microparticles, yet formidable challenges are present in the separation of nanoparticles smaller than 200 nm. The difficulties arise from the controversy on the requirement of a tightly focused light spot in order to create strong optical forces while a large area is kept for the sorting. To overcome this problem, we create a near-field potential well array with connected tiny hotspots in a large scale. This situation can sort nanoparticles with sizes from 100 to 500 nm, based on the differentiated energy depths of each potential well. In this way, nanoparticles of 200, 300, and 500 nm can be selectively trapped in this microchannel by appropriately tuning the laser power. Our approach provides a robust and unprecedented recipe for optical trapping and separation of nanoparticles and biomolecules, such that it presents a huge potential in the physical and biomedical sciences.

Optical Sorting at the Single-Particle Level with Single-Nanometer Precision Using Coordinated Intensity and Phase Gradient Forces

Position-controlled sorting of colloidal nanoparticles (NPs) at the single-particle level is a challenge in nanoscience. Optofluidic potential wells can partially address this challenge, but they have limited flexibility, reconfigurability, and precision. Here we introduce a strategy by feedback-controlled manipulation of NPs using reconfigurable optical traps with designed intensity and phase gradient. Spatiotemporal patterns of these optical traps coordinatively manipulate the NPs based on machine vision of their positions and differentiated scattering intensities. The NPs are always kept inside the optical field during the manipulation and stably trapped once the sorting is accomplished. To substantiate the key advantages of our approach, we present position-controlled optical sorting of single Ag and Au NPs of the same size (150 nm diameter) and ordering of monodisperse Au NPs (80 ± 9 nm diameter) according to their sub-10 nm radius variation, which can hardly be done via other approaches.

Nanovortex-Driven All-Dielectric Optical Diffusion Boosting and Sorting Concept for Lab-on-a-Chip Platforms

The ever-growing field of microfluidics requires precise and flexible control over fluid flows at reduced scales. Current constraints demand a variety of controllable components to carry out several operations inside microchambers and microreactors. In this context, brand-new nanophotonic approaches can significantly enhance existing capabilities providing unique functionalities via finely tuned light-matter interactions. A concept is proposed, featuring dual on-chip functionality: boosted optically driven diffusion and nanoparticle sorting. High-index dielectric nanoantennae is specially designed to ensure strongly enhanced spin-orbit angular momentum transfer from a laser beam to the scattered field. Hence, subwavelength optical nanovortices emerge driving spiral motion of plasmonic nanoparticles via the interplay between curl-spin optical forces and radiation pressure. The nanovortex size is an order of magnitude smaller than that provided by conventional beam-based approaches. The nanoparticles mediate nanoconfined fluid motion enabling moving-part-free nanomixing inside a microchamber. Moreover, exploiting the nontrivial size dependence of the curled optical forces makes it possible to achieve precise nanoscale sorting of gold nanoparticles, demanded for on-chip separation and filtering. Altogether, a versatile platform is introduced for further miniaturization of moving-part-free, optically driven microfluidic chips for fast chemical analysis, emulsion preparation, or chemical gradient generation with light-controlled navigation of nanoparticles, viruses or biomolecules.

Lab-on-a-Chip Technologies for the Single Cell Level: Separation, Analysis, and Diagnostics

In the last three decades, microfluidics and its applications have been on an exponential rise, including approaches to isolate rare cells and diagnose diseases on the single-cell level. The techniques mentioned herein have already had significant impacts in our lives, from in-the-field diagnosis of disease and parasitic infections, through home fertility tests, to uncovering the interactions between SARS-CoV-2 and their host cells. This review gives an overview of the field in general and the most notable developments of the last five years, in three parts: 1. What can we detect? 2. Which detection technologies are used in which setting? 3. How do these techniques work? Finally, this review discusses potentials, shortfalls, and an outlook on future developments, especially in respect to the funding landscape and the field-application of these chips.