Single-atom catalysis of CO oxidation using Pt1/FeOx

Theoretical study on the carbon nanomaterial-supported Pt complex electrocatalysts for efficient and selective chlorine evolution reaction

Chlorine is an important chemical which has long been produced in chlor-alkali process using dimensionally stable anodes (DSA). However, some serious drawbacks of DSA inspire the development of alternative anodes for chlorine evolution reaction (CER). In this study, we focused on the graphene- and carbon nanotube-supported platinum tetra-phenyl porphyrins as electrocatalysts for CER, which have been theoretically investigated based on density functional theory. Our results reveal that the supported substrates possess potential CER electrocatalytic activity with very low thermodynamic overpotentials (0.012-0.028 V) via Cl* pathway instead of ClO*. The electronic structures analyses showed that electron transfer from the support to the adsorbed chlorine via the Pt center leads to strong Pt-Cl interactions. Furthermore, the supported electrocatalysts exhibited excellent selectivity toward CER because of high overpotentials and reaction barriers of oxygen evolution process. Therefore, our results may pave the way for designing CER electrocatalyst utilizing emerging carbon nanomaterials.

Colorimetric sensor array for identifying antioxidants based on pyrolysis-free synthesis of Fe-N/C single-atom nanozymes

Iron-anchored nitrogen/doped carbon single-atom nanozymes (Fe-N/C), which possess homogeneous active sites and adjustable catalytic environment, represent an exemplary model for investigating the structure-function relationship and catalytic activity. However, the development of pyrolysis-free synthesis technique for Fe-N/C with adjustable enzyme-mimicking activity still presents a significant challenge. Herein, Fe-N/C anchored three carrier morphologies were created via a pyrolysis-free approach by covalent organic polymers. The peroxidase-like activity of these Fe-N/C nanozymes was regulated via the pores of the anchored carrier, resulting in varying electron transfer efficiency due to disparities in contact efficacy between substrates and catalytic sites within diverse microenvironments. Additionally, a colorimetric sensor array for identifying antioxidants was developed: (1) the Fe-N/C catalytically oxidized two substrates TMB and ABTS, respectively; (2) the development of a colorimetric sensor array utilizing oxTMB and oxABTS as sensing channels enabled accurate discrimination of antioxidants such as ascorbic acid (AsA), glutathione (GSH), cysteine (Cys), gallic acid (GA), and caffeic acid (CA). Subsequently, the sensor array underwent rigorous testing to validate its performance, including assessment of antioxidant mixtures and individual antioxidants at varying concentrations, as well as target antioxidants and interfering substances. In general, the present study offered valuable insights into the active origin and rational design of nanozyme materials, and highlighting their potential applications in food analysis.

Applications of metal nanoclusters supported on the two-dimensional material graphene in electrocatalytic carbon dioxide reduction

Metal nanoclusters (MNCs) have been demonstrated to exhibit superior catalytic performance compared to single nanoparticles. This is attributed to their quantized electronic structure, unique geometrical stacking and abundant active sites. While the exposed metal atoms can markedly enhance the efficiency of catalysis, unfortunately, MNCs are susceptible to agglomeration, which impairs their catalytic activity and stability. Graphene is a two-dimensional material consisting of a single atomic layer formed by the hybridization of the s and p orbitals of carbon atoms. It exhibits stable physical and chemical properties and has an easily controllable structure, making it an ideal carrier for MNCs. When metal nanoclusters (MNCs) are loaded on a graphene substrate, the MNCs can form a stable binding site on the graphene substrate. Furthermore, the construction of a defective structure on the graphene substrate enables the formation of robust interactions between the metal atoms of the MNCs and the substrate, facilitating the rapid establishment of electron conduction pathways and markedly enhancing the electrocatalytic performance. This paper presents a review of the applications of metal nanoclusters supported on graphene skeletons in the field of the electrocatalytic CO2 reduction reaction (CO2RR). Firstly, we briefly introduce the reaction mechanism of the CO2RR, then we systematically discuss the synthesis strategies, properties and applications of metal nanoclusters in electrocatalytic carbon dioxide reduction from both experimental and theoretical perspectives, and lastly, we discuss the opportunities and challenges of metal nanocluster catalysts supported on carbon materials.

Subsurface Single-Atom Catalyst Enabled by Mechanochemical Synthesis for Oxidation Chemistry

Single-atom catalysts have garnered significant attention due to their exceptional atom utilization and unique properties. However, the practical application of these catalysts is often impeded by challenges such as sintering-induced instability and poisoning of isolated atoms due to strong gas adsorption. In this study, we employed the mechanochemical method to insert single Cu atoms into the subsurface of Fe2O3 support. By manipulating the location of single atoms at the surface or subsurface, catalysts with distinct adsorption properties and reaction mechanisms can be achieved. It was observed that the subsurface Cu single atoms in Fe2O3 remained isolated under both oxidation and reduction environments, whereas surface Cu single atoms on Fe2O3 experienced sintering under reduction conditions. The unique properties of these subsurface single-atom catalysts call for innovations and new understandings in catalyst design.

On the Nature of HOPG-Supported Pt1Ti2O7 and its Decomposition of a Nerve Agent Simulant: A Cluster Model of a Single Atom Catalyst Active Site

Chemical weapons, including hyper lethal nerve agents, are a persistently looming threat across the modern geopolitical landscape. There is a pressing need for the design and development of improved protective materials, which can be substantially aided by the cultivation of a fundamental molecular-level understanding of candidate systems and the corresponding decomposition chemistry. The emergence of the exciting new class of single atom catalyst (SAC) materials has enhanced the prospect of subnanoscale design tailoring in the hopes of optimizing activity and selectivity for a variety of chemical applications. Here, we apply our recently developed experimental technique for modeling the active sites of such SAC materials through the preparation of surface supported size-selected single metal-atom doped metal oxide clusters. The propensity for an SAC cluster model system for Pt1/TiO2 materials, Pt1Ti2O7 supported on highly oriented pyrolytic graphite (HOPG), to adsorb and decompose nerve agent simulant dimethyl methylphosphonate (DMMP) was investigated through a combination of temperature-programmed desorption/reaction (TPD/R) and X-ray photoelectron spectroscopy (XPS). XPS measurements of the as-prepared Pt1Ti2O7 clusters supported the successful isolation of single Pt atoms in clusters monodispersed across the HOPG surface. TPD/R experiments showed that the reactivity exhibited by the Pt1Ti2O7 clusters was distinct from that of Ti2O7 clusters lacking the single Pt atom. It was found that DMMP decomposed over Pt1Ti2O7 upon heating to as low as room temperature, and higher temperature treatments evolved exclusively H2O, CO, and H2, while decomposition over Ti2O7 evolved only methanol and formaldehyde at elevated temperatures. This indicated the promotion of C-H and PO-C bond cleavage within DMMP due to the presence of single Pt atoms in the clusters. Further, the Pt1Ti2O7 clusters were found to desorb P-containing decomposition species, preventing active site poisoning; however, a change of reactivity reflecting that of Ti2O7 was observed following a single TPD/R cycle. This suggested the encapsulation of active Pt sites by titanium oxide during high temperature treatment and is thus an issue deserving of serious attention in the study of Pt1/Ti2O7 SAC materials.

Single-Atom Doped Fullerene (MN4-C54) as Bifunctional Catalysts for the Oxygen Reduction and Oxygen Evolution Reactions

Development of high-performance oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts is crucial to realizing the electrolytic water cycle. C60 is an ideal substrate material for single atom catalysts (SACs) due to its unique electron-withdrawing properties and spherical structure. In this work, we screened for a novel single-atom catalyst based on C60, which anchored transition metal atoms in the C60 molecule by coordination with N atoms. Through first-principles calculations, we evaluated the stability and activity of MN4-C54 (M = Fe, Co, Ni, Cu, Rh, Ru, Pd, Ag, Pt, Ir, Au). The results indicate that CuN4-C54, which is based only on earth-abundant elements, exhibited low overpotentials of 0.46 and 0.47 V for the OER and ORR, respectively, and was considered a promising bifunctional catalyst, showing better performance than the noble-metal ones. In addition, according to the linear relationship of intermediates, we established volcano plots to describe the activity trends of the OER and ORR on MN4-C54. Finally, d-band center and crystal orbital Hamiltonian populations methods were used to explain the catalytic origin. Suitable d-band centers lead to moderate adsorption strength, further leading to good catalytic performances.

Atomically dispersed recognition unit for selective in vivo photoelectrochemical medicine detection

Continuous and long-term therapeutic monitoring of medicine molecules in biological systems will revolutionize healthcare by offering personalized pharmacokinetic reports. However, the extremely complex biological environment brings great challenges for in vivo molecule detection in living organisms. Here we introduce an in vivo photoelectrochemical biosensor following a reverse design strategy with single atoms as molecular recognition units. Atomic dispersion of Cu single atoms on TiO2-x substrate create synergistic anchoring triple-site for efficiently and selectively capturing of dual-carbonyl group and neighboring dual-hydroxyl group of tetracycline molecules. The photoelectrode is encapsulated with antibiofouling layer and implanted into the vein of living mouse to enable long-term in vivo monitoring of tetracycline in real biological environments. It is important to note that our approach was exclusively tested in male mice, and therefore, the findings may not be generalizable to female mice or other species without further research. The rationally designed biological-components-free in vivo biosensor with excellent selectivity, robustness, and stability endows possibility for enabling personalized medicine guidance through real-time feedbacking information and providing direct and authentic medicine molecular analysis.

Recent advances on COF-based single-atom and dual-atom sites for oxygen catalysis

Covalent organic frameworks (COFs) have emerged as promising platforms for the construction of single-atom and dual-atom catalysts (SACs and DACs), owing to their well-defined structures, tunable pore sizes, and abundant active sites. In recent years, the development of COF-based SACs and DACs as highly efficient catalysts has witnessed a remarkable surge. The synergistic interplay between the metal active sites and the COF has established the design and fabrication of COF-based SACs and DACs as a prominent research area in electrocatalysis. These catalytic materials exhibit promising prospects for applications in energy storage and conversion devices. This review summarizes recent advances in the design, synthesis, and applications of COF-based SACs and DACs for oxygen catalysis. The catalytic mechanisms of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are comprehensively explored, providing a comparative analysis to elucidate the correlation between the structure and performance, as well as their functional attributes in battery devices. This review highlights a promising approach for future research, emphasizing the necessity of rational design, breakthroughs, and in-situ characterization to further advance the development of high-performance COF-based SACs and DACs for sustainable energy applications.

Low-peroxide-consumption fenton-like systems: The future of advanced oxidation processes

Conventional heterogeneous Fenton-like systems employing different peroxides have been developed for water/wastewater remediation. However, a large population of peroxides consumed during various Fenton-like systems with low utilization efficiency and associated secondary contamination have become the bottlenecks for their actual applications. Recent strategies for lowering the peroxide consumptions to develop economic Fenton-like systems are primarily devoted to the effective radical generation and subsequent high-efficiency radical utilization through catalysts/systems engineering, leveraging emerging nonradical oxidation pathways with higher selectivity and longer life of the reactive intermediate, as well as reactor designs for promoting the mass transfer and peroxides decomposition to improve the yield of radicals/nonradicals. However, a comparative review summarizing the mechanisms and pathways of these strategies has not yet been published. In this review, we endeavor to showcase the designated systems achieving the reduction of peroxides while ensuring high catalytic activity from the perspective of the above strategic mechanisms. An in-depth understanding of these aspects will help elucidate the key mechanisms for achieving economic peroxide consumption. Finally, the existing problems of these strategies are put forward, and new ideas and research directions for lowering peroxide consumption are proposed to promote the application of various Fenton-like systems in actual wastewater purification.

Enhancement of single-atom catalytic activity by the synergistic effect of interlayer charge transfer and magnetic coupling in an electride-based heterostructure

2D material-based single-atom catalysts have rapidly emerged and flourished in recent years due to their exceptional atomic utilization efficiency, adjustable catalytic activity, and remarkably high selectivity. The interface matching mechanism of 2D materials, influenced by van der Waals (vdW) interactions, presents a novel opportunity for constructing a heterostructure, further augmenting catalytic efficiency. In this work, the mechanism of performance regulation of magnetic transition-metal decorated MoS2 single-atom catalysis by importing a Gd2C electride substrate is investigated using first-principles calculations. The localization of d orbitals in transition-metals is weakened by adding a Gd2C substrate, thereby modulating the catalytic performance. Our findings demonstrate that the formation of an electron layer at the interface of the heterostructure by electride Gd2C induces a modification in the chemical environment of the MoS2 surface. The electron layer enhances the electron transfer during catalysis. Additionally, for the catalyst containing magnetic atoms, Gd2C can also achieve catalytic performance adjustment due to the magnetic coupling, similar to the effect of external magnetic fields. This study offers a novel concept and a pathway for enhancing the performance of single-atom catalysts through the construction of a heterostructure, capitalizing on the distinctive electron layer of an electride and its inherent high magnetic moments.

Quantitative Measurement of Cooperative Binding in Partially Dissociated Water Dimers at the Hematite "R-Cut" Surface

Water-solid interfaces pervade the natural environment and modern technology. On some surfaces, water-water interactions induce the formation of partially dissociated interfacial layers; understanding why is important to model processes in catalysis or mineralogy. The complexity of the partially dissociated structures often makes it difficult to probe them quantitatively. Here, we utilize normal incidence X-ray standing waves (NIXSW) to study the structure of partially dissociated water dimers (H2O-OH) at the α-Fe2O3(012) surface (also called the (11̅02) or "R-cut" surface): a system simple enough to be tractable yet complex enough to capture the essential physics. We find the H2O and terminal OH groups to be the same height above the surface within experimental error (1.45 ± 0.04 and 1.47 ± 0.02 Å, respectively), in line with DFT-based calculations that predict comparable Fe-O bond lengths for both water and OH species. This result is understood in the context of cooperative binding, where the formation of the H-bond between adsorbed H2O and OH induces the H2O to bind more strongly and the OH to bind more weakly compared to when these species are isolated on the surface. The surface OH formed by the liberated proton is found to be in plane with a bulk truncated (012) surface (-0.01 ± 0.02 Å). DFT calculations based on various functionals correctly model the cooperative effect but overestimate the water-surface interaction.

Recent Development of Nanozymes for Combating Bacterial Drug Resistance: A Review

The World Health Organization has warned that without effective action, deaths from drug-resistant bacteria can exceed 10 million annually, making it the leading cause of death. Conventional antibiotics are becoming less effective due to rapid bacterial drug resistance and slowed new antibiotic development, necessitating new strategies. Recently, materials with catalytic/enzymatic properties, known as nanozymes, have been developed, inspired by natural enzymes essential for bacterial eradication. Unlike recent literature reviews that broadly cover nanozyme design and biomedical applications, this review focuses on the latest advancements in nanozymes for combating bacterial drug resistance, emphasizing their design, structural characteristics, applications in combination therapy, and future prospects. This approach aims to promote nanozyme development for combating bacterial drug resistance, especially towards clinical translation.

An Oriented Diffusion Strategy to Configure All-Region Ultrahigh-Density Metal Single Atoms for High-Capacity Sodium Storage

Single-atom metals (SAMs), despite being promising for high-utilization catalysis, biomedicine, and energy storage, usually suffer from limited catalytic performance caused by low metal loading. Herein, via an oriented diffusion strategy, all-region ultrahigh-loading (18.9 wt.%) Sn-SAMs over carbon nanorings matrix (Sn-SAMs@CNR) are initially achieved based on the transformation of a g-C3N4@SnO2@polydopamine ring-like nested structure. The formation process of Sn-SAMs involves a critical conversion from oxygen-coordination (SnO2) to nitrogen-coordination (Sn-N4) and simultaneous anti-Osterwalder ripening promoted under spatial confinement. Notably, the g-C3N4-derived N-containing gaseous intermediates dynamically drive the oriented diffusion (inside-out diffusion) of Sn-SAMs across the carbon nanorings, realizing an all-region ultrahigh loading of SAMs throughout the carbon matrix. This strategy is also applied to other metal materials (Fe, Co, Ni, Cu, and Sb), and features excellent universality. When applied as the anode for sodium-ion batteries, experimental analyses and theoretical calculations demonstrate that high-loading Sn-N4 active sites significantly optimize electron density distribution and improve reaction kinetics. Consequently, Sn-SAMs@CNR exhibits outstanding durability of 364 mAh g-1   even after 5000 cycles with an impressively low (0.00068%) capacity decay per cycle. This work opens up a universally new avenue for all-region ultrahigh loading of SAMs to carbon matrix for high-performance energy storage.

Microenvironment Engineering of Heterogeneous Catalysts for Liquid-Phase Environmental Catalysis

Environmental catalysis has emerged as a scientific frontier in mitigating water pollution and advancing circular chemistry and reaction microenvironment significantly influences the catalytic performance and efficiency. This review delves into microenvironment engineering within liquid-phase environmental catalysis, categorizing microenvironments into four scales: atom/molecule-level modulation, nano/microscale-confined structures, interface and surface regulation, and external field effects. Each category is analyzed for its unique characteristics and merits, emphasizing its potential to significantly enhance catalytic efficiency and selectivity. Following this overview, we introduced recent advancements in advanced material and system design to promote liquid-phase environmental catalysis (e.g., water purification, transformation to value-added products, and green synthesis), leveraging state-of-the-art microenvironment engineering technologies. These discussions showcase microenvironment engineering was applied in different reactions to fine-tune catalytic regimes and improve the efficiency from both thermodynamics and kinetics perspectives. Lastly, we discussed the challenges and future directions in microenvironment engineering. This review underscores the potential of microenvironment engineering in intelligent materials and system design to drive the development of more effective and sustainable catalytic solutions to environmental decontamination.

Rice HUSK silica: A review from conventional uses to new catalysts for advanced oxidation processes

The rice industry is of great importance worldwide and within the cereal industrialization process, rice husk is obtained as waste, a by-product with various alternative uses, among others, the obtaining of amorphous silica, a covalent oxide with chemical, structural and textural properties suitable for use as catalytic support. This review shows the potential of rice husk silica in the synthesis of heterogeneous catalysts with transition metals for the oxidation of different polluting molecules present in water, as well as the limitations of the catalytic system and the way to overcome them through new synthesis routes, to obtain single atom catalysts - SACs. The main preparation strategies applied for aqueous phase systems are summarized, as well as the studies of single atom catalysts in oxidation reactions of recalcitrant compounds using silica as support and, finally, the perspectives and opportunities regarding this novel topic.

Unveiling Advancements: Trends and Hotspots of Metal-Organic Frameworks in Photocatalytic CO2 Reduction

Metal-organic frameworks (MOFs) are robust, crystalline, and porous materials featured by their superior CO2 adsorption capacity, tunable energy band structure, and enhanced photovoltaic conversion efficiency, making them highly promising for photocatalytic CO2 reduction reaction (PCO2RR). This study presents a comprehensive examination of the advancements in MOFs-based PCO2RR field spanning the period from 2011 to 2023. Employing bibliometric analysis, the paper scrutinizes the widely adopted terminology and citation patterns, elucidating trends in publication, leading research entities, and the thematic evolution within the field. The findings highlight a period of rapid expansion and increasing interdisciplinary integration, with extensive international and institutional collaboration. A notable emphasis on significant research clusters and key terminologies identified through co-occurrence network analysis, highlighting predominant research on MOFs such as UiO, MIL, ZIF, porphyrin-based MOFs, their composites, and the hybridization with photosensitizers and molecular catalysts. Furthermore, prospective design approaches for catalysts are explored, encompassing single-atom catalysts (SACs), interfacial interaction enhancement, novel MOF constructions, biocatalysis, etc. It also delves into potential avenues for scaling these materials from the laboratory to industrial applications, underlining the primary technical challenges that need to be overcome to facilitate the broader application and development of MOFs-based PCO2RR technologies.

Electronic communications between active sites on individual metallic nanoparticles in catalysis

Catalytic activity of metal particles is reported to originate from the appearance of nonmetallic states, but conductive metallic particles, as an electron reservoir, should render electron delivery between reactants more favorably so as to have higher activity. We present that metallic rhodium particle catalysts are highly active in the low-temperature oxidation of carbon monoxide, whereas nonmetallic rhodium clusters or monoatoms on alumina remain catalytically inert. Experimental and theoretical results evidence the presence of electronic communications in between vertex atom active sites of individual metallic particles in the reaction. The electronic communications dramatically lower apparent activation energies via coupling two electrochemical-like half-reactions occurring on different active sites, which enable the metallic particles to show turnover frequencies at least four orders of magnitude higher than the nonmetallic clusters or monoatoms. Similar results are found for other metallic particle catalysts, implying the importance of electronic communications between active sites in heterogeneous catalysis.

Emerging ZnO Semiconductors for Photocatalytic CO2 Reduction to Methanol

Carbon recycling is poised to emerge as a prominent trend for mitigating severe climate change and meeting the rising demand for energy. Converting carbon dioxide (CO2) into green energy and valuable feedstocks through photocatalytic CO2 reduction (PCCR) offers a promising solution to global warming and energy needs. Among all semiconductors, zinc oxide (ZnO) has garnered considerable interest due to its ecofriendly nature, biocompatibility, abundance, exceptional semiconducting and optical properties, cost-effectiveness, easy synthesis, and durability. This review thoroughly discusses recent advances in mechanistic insights, fundamental principles, experimental parameters, and modulation of ZnO catalysts for direct PCCR to C1 products (methanol). Various ZnO modification techniques are explored, including atomic size regulation, synthesis strategies, morphology manipulation, doping with cocatalysts, defect engineering, incorporation of plasmonic metals, and single atom modulation to boost its photocatalytic performance. Additionally, the review highlights the importance of photoreactor design, reactor types, geometries, operating modes, and phases. Future research endeavors should prioritize the development of cost-effective catalyst immobilization methods for solid-liquid separation and catalyst recycling, while emphasizing the use of abundant and non-toxic materials to ensure environmental sustainability and economic viability. Finally, the review outlines key challenges and proposes novel directions for further enhancing ZnO-based photocatalytic CO2 conversion processes.

Si@SbN: a promising solar photocatalyst for the reduction of NO

Si@SbN, a highly promising visible-light photocatalyst for the NO reduction reaction (NORR), was studied by performing first-principles calculations. A novel design concept of the Si electron configuration applied to metal-free active sites has been explored. This Si-altered SbN enhances chemical NORR activity without taking into account complicated reaction mechanisms, facilitating the development of catalysts.

Enabling Sustainable Ammonia Synthesis: From Nitrogen Activation Strategies to Emerging Materials

Ammonia (NH3) is one of the most important precursors of various chemicals and fertilizers. Given that ammonia synthesis via the traditional Haber-Bosch process requires high temperatures and pressures, it is critical to explore effective strategies and catalysts for ammonia synthesis under mild reaction conditions. Although electrocatalysis and photocatalysis can convert N2 to NH3 under mild conditions, their efficiencies and production scales are still far from the requirements for industrialization. Thermal catalysis has been proven to be the most direct and effective approach for ammonia synthesis. Over the past few decades, significant efforts have been made to develop novel catalysts capable of nitrogen fixation and ammonia generation via thermal catalytic processes. In parallel with catalyst exploration, new strategies such as self-electron donation, hydride fixation, hydridic hydrogen reduction, and anionic vacancy promotion have also been explored to moderate the operating conditions and improve the catalytic efficiency of ammonia synthesis. In this review, the emergence of new materials and strategies for promoting N2 activation and NH3 formation during thermal catalysis is briefly summarized. Moreover, challenges and prospects are proposed for the future development of thermal catalytic ammonia synthesis.

Regulating Co-O covalency to manipulate mechanistic transformation for enhancing activity/durability in acidic water oxidation

Developing earth-abundant electrocatalysts with high activity and durability for acidic oxygen evolution reaction is essential for H2 production, yet it remains greatly challenging. Here, guided by theoretical calculations, the challenge of overcoming the balance between catalytic activity and dynamic durability for acidic OER in Co3O4 was effectively addressed via the preferential substitution of Ru for the Co2+ (Td) site of Co3O4. In situ characterization and DFT calculations show that the enhanced Co-O covalency after the introduction of Ru SAs facilitates the generation of OH* species and mitigates the unstable structure transformation via direct O-O coupling. The designed Ru SAs-CoO x catalyst (5.16 wt% Ru) exhibits enhanced OER activity (188 mV overpotential at 10 mA cm-2) and durability, outperforming most reported Co3O4-based and Ru-based electrocatalysts in acidic media.

Periodic Single-Metal Site Catalysts: Creating Homogeneous and Ordered Atomic-Precision Structures

Heterogeneous single-metal-site catalysts (SMSCs), often referred to as single-atom catalysts (SACs), demonstrate promising catalytic activity, selectivity, and stability across a wide spectrum of reactions due to their rationally designed microenvironments encompassing coordination geometry, binding ligands, and electronic configurations. However, the inherent disorderliness of SMSCs at both atomic scale and nanoscale poses challenges in deciphering working principles and establishing the correlations between microenvironments and the catalytic performances of SMSCs. The rearrangement of randomly dispersed single metals into homogeneous and atomic-precisely structured periodic single-metal site catalysts (PSMSCs) not only simplifies the chaos in SMSCs systems but also unveils new opportunities for manipulating catalytic performance and gaining profound insights into reaction mechanisms. Moreover, the synergistic effects of adjacent single metals and the integration effects of periodic single-metal arrangement further broaden the industrial application scope of SMSCs. This perspective offers a comprehensive overview of recent advancements and outlines prospective avenues for research in the design and characterizations of PSMSCs, while also acknowledging the formidable challenges encountered and the promising prospects that lie ahead.

Unveiling the potential of MOF-based single-atom photocatalysts for the production of clean fuel and valuable chemical

Harnessing solar energy through photocatalysis has excellent potential for powering sustainable chemical production, supporting the United Nations' environmental goals. Single-atoms (SAs) dispersed on catalyst surfaces are gaining attention for their highly active and durable nature. Metal-organic frameworks (MOFs) can provide enough reactive sites to sustain selectivity and durability over time because of their tunable channels and functional groups. Owing to their organized structures, MOFs are ideal platforms for securing individual atoms and promoting solar-driven reactions. Few reviews have, however, reflected the possibility of combining MOFs and SAs to produce potent photocatalysts that may produce clean fuels and valuable chemicals. This review provides a general overview of methods for combining MOFs and SAs to generate photocatalysts. The challenges associated with these MOF-based single-atom systems are also critically examined. Their future development is discussed as continued refinement helps to more fully leverage their advantages for boosting photocatalytic performances - turning sunlight into chemicals in a manner that supports sustainable development. Insights gained here could illuminate pathways toward realizing the profound potential of MOF-based single-atom photocatalysts to empower production driven by renewable solar energy.

Halogen Tailoring of Platinum Electrocatalyst with High CO Tolerance for Methanol Oxidation Reaction

The catalytic activity of platinum for CO oxidation depends on the interaction of electron donation and back-donation at the platinum center. Here we demonstrate that the platinum bromine nanoparticles with electron-rich properties on bromine bonded with sp-C in graphdiyne (PtBr NPs/Br-GDY), which is formed by bromine ligand and constitutes an electrocatalyst with a high CO-resistant for methanol oxidation reaction (MOR). The catalyst showed peak mass activity for MOR as high as 10.4 A mgPt -1, which is 20.8 times higher than the 20 % Pt/C. The catalyst also showed robust long-term stability with slight current density decay after 100 hours at 35 mA cm-2. Structural characterization, experimental, and theoretical studies show that the electron donation from bromine makes the surface of platinum catalysts highly electron-rich, and can strengthen the adsorption of CO as well as enhance π back-donation of Pt to weaken the C-O bond to facilitate CO electrooxidation and enhance catalytic performance during MOR. The results highlight the importance of electron-rich structure among active sites in Pt-halogen catalysts and provide detailed insights into the new mechanism of CO electrooxidation to overcome CO poisoning at the Pt center on an orbital level.

Catalytic Potential of Supported Superatoms

The importance of catalysts in industrial products is a driving factor in the search of efficient and cost-effective catalysts, creating considerable interest in the past decade in single-atom catalysis. One of the first requirements of a good catalyst is that it should bind to the molecules with energies intermediate between physisorption and chemisorption while simultaneously activating them. Herein, it is shown that superatoms, which are atomic clusters with fixed size and composition, can meet this challenge even better than the atoms whose chemistry they mimic. The reactions of molecules such as H2, O2, N2, CO, NO, and CO2 with an atom (Li) and its corresponding superatom (Li3O) are confirmed through study. As these clusters need to be supported on a substrate for practical applications, the study focuses on the reaction of CO2 with Li and Li3O supported on graphene, Au(111), and Cu(111) substrates. Using density functional theory, it is shown that the Li3O superatom can activate CO2 far greater than the Li atom - stretching the CO bond from 1.16 Å to as large as 1.30 Å and bending the O─C─O bond angle from 180° to as low as 120°. Equally interesting, the results are not very sensitive to the substrate.

Ultrahigh Single Au Atoms Loaded Porous Aromatic Frameworks for Enhanced Photocatalytic Hydrogen Evolution

Supported single-atom catalysts (SACs) are promising in heterogeneous catalysis because of their atom economy, unusual transformations, and mechanistic clarity. The metal SAs loading, however, limits the catalytic efficiency. Herein, an in situ pre-metallated monomer-based preparation strategy is shown to achieve ultrahigh Au SAs loading in catalyst formations. The polymerization of single-atom loaded monomers yield a new porous aromatic framework (PAF-164) with Au SAs loading up to a record high 45.3 wt.%. SACs of Au-PAFs exhibit excellent photocatalytic activity in hydrogen (H2) evolution, and the H2 evolution rate of Au100%-SAs-PAF-164 can reach 4.82 mmol g-1 h-1 with great recyclability.

Asymmetric Microenvironment Tailoring Strategies of Atomically Dispersed Dual-Site Catalysts for Oxygen Reduction and CO2 Reduction Reactions

Dual-atom catalysts (DACs) with atomically dispersed dual-sites, as an extension of single-atom catalysts (SACs), have recently become a new hot topic in heterogeneous catalysis due to their maximized atom efficiency and dual-site diverse synergy, because the synergistic diversity of dual-sites achieved by asymmetric microenvironment tailoring can efficiently boost the catalytic activity by optimizing the electronic structure of DACs. Here, this work first summarizes the frequently-used experimental synthesis and characterization methods of DACs. Then, four synergistic catalytic mechanisms (cascade mechanism, assistance mechanism, co-adsorption mechanism and bifunction mechanism) and four key modulating methods (active site asymmetric strategy, transverse/axial-modification engineering, distance engineering and strain engineering) are elaborated comprehensively. The emphasis is placed on the effects of asymmetric microenvironment of DACs on oxygen/carbon dioxide reduction reaction. Finally, some perspectives and outlooks are also addressed. In short, the review summarizes a useful asymmetric microenvironment tailoring strategy to speed up synthesis of high-performance electrocatalysts for different reactions.

Digging Its Own Site: Linear Coordination Stabilizes a Pt1/Fe2O3 Single-Atom Catalyst

Determining the local coordination of the active site is a prerequisite for the reliable modeling of single-atom catalysts (SACs). Obtaining such information is difficult on powder-based systems and much emphasis is placed on density functional theory computations based on idealized low-index surfaces of the support. In this work, we investigate how Pt atoms bind to the (11̅02) facet of α-Fe2O3; a common support material in SACs. Using a combination of scanning tunneling microscopy, X-ray photoelectron spectroscopy, and an extensive computational evolutionary search, we find that Pt atoms significantly reconfigure the support lattice to facilitate a pseudolinear coordination to surface oxygen atoms. Despite breaking three surface Fe-O bonds, this geometry is favored by 0.84 eV over the best configuration involving an unperturbed support. We suggest that the linear O-Pt-O configuration is common in reactive Pt-based SAC systems because it balances thermal stability with the ability to adsorb reactants from the gas phase. Moreover, we conclude that extensive structural searches are necessary to determine realistic active site geometries in single-atom catalysis.

Challenges and Opportunities for Single-Atom Electrocatalysts: From Lab-Scale Research to Potential Industry-Level Applications

Single-atom electrocatalysts (SACs) are a class of promising materials for driving electrochemical energy conversion reactions due to their intrinsic advantages, including maximum metal utilization, well-defined active structures, and strong interface effects. However, SACs have not reached full commercialization for broad industrial applications. This review summarizes recent research achievements in the design of SACs for crucial electrocatalytic reactions on their active sites, coordination, and substrates, as well as the synthesis methods. The key challenges facing SACs in activity, selectivity, stability, and scalability, are highlighted. Furthermore, it is pointed out the new strategies to address these challenges including increasing intrinsic activity of metal sites, enhancing the utilization of metal sites, improving the stability, optimizing the local environment, developing new fabrication techniques, leveraging insights from theoretical studies, and expanding potential applications. Finally, the views are offered on the future direction of single-atom electrocatalysis toward commercialization.

Integrative catalytic pairs for efficient multi-intermediate catalysis

Single-atom catalysts (SACs) have attracted considerable research interest owing to their combined merits of homogeneous and heterogeneous catalysts. However, the uniform and isolated active sites of SACs fall short in catalysing complex chemical processes that simultaneously involve multiple intermediates. In this Review, we highlight an emerging class of catalysts with adjacent binary active centres, which is called integrative catalytic pairs (ICPs), showing not only atomic-scale site-to-site electronic interactions but also synergistic catalytic effects. Compared with SACs or their derivative dual-atom catalysts (DACs), multi-interactive intermediates on ICPs can overcome kinetic barriers, adjust reaction pathways and break the universal linear scaling relations as the smallest active units. Starting from this active-site design principle, each single active atom can be considered as a brick to further build integrative catalytic clusters (ICCs) with desirable configurations, towards trimer or even larger multi-atom units depending on the requirement of a given reaction.

Facile construction of Mo-based nanozyme system via ZIF-8 templating with enhanced catalytic efficiency and antibacterial performance

Although Zeolitic Imidazolate Framework-8 (ZIF-8) shows significant promise in chemodynamic therapy of bacterial infections due to its large specific surface area and enzyme-like activity, it still faces a considerable gap compared to natural enzymes. The dependency on low pH and high concentrations of hydrogen peroxide ((H2O2) is a major factor limiting the clinical progress of nanozymes. Single-atom nanozymes (SA-zyme), which exhibit superior catalytic performance, are expected to overcome this limitation. In this study, we used ZIF-8 as a template to prepare structurally regular molybdenum-based single-atom nanozymes (Mo-zyme) by coordinating molybdenum atoms with nitrogen atoms within the zeolitic imidazolate framework and evaporating the zinc element at high temperatures. The cascade catalytic performance of the nanodrugs was enhanced by loading glucose oxidase (GOx) and encapsulating it with a hyaluronic acid (HA) layer to form a composite (Mo/GOx@HA). Upon contact with hyaluronidase from bacteria in infected tissues, the cascade reaction is triggered, resulting in the degradation of the HA shell, and releasing the encapsulated GOx. Once exposed, GOx catalyzes the oxidation of glucose into gluconic acid, resulting in a localized decrease in pH and continuous production of H2O2. The combination of lowered pH and increased H2O2 concentration significantly amplifies the catalytic activity of the Mo-zyme. This enhanced activity facilitates the in situ generation of hydroxyl radicals (•OH) on the bacterial surface, leading to effective and efficient bacterial eradication. Wound infection treatment has demonstrated that the as-prepared Mo/GOx@HA exhibits excellent antibacterial and anti-inflammatory activity. This work provided a promising enzymatic cascade reaction nanoplatform for the treatment of bacteria infected wounds.

Tuning catalytic performance of platinum single atoms by choosing the shape of cerium dioxide supports

The local coordination environment of single atom catalysts (SACs) often determines their catalytic performance. To understand these metal-support interactions, we prepared Pt SACs on cerium dioxide (CeO2) cubes, octahedra and rods, with well-structured exposed crystal facets. The CeO2 crystals were characterized by SEM, TEM, pXRD, and N2 sorption, confirming the shape-selective synthesis, identical bulk structure, and variations in specific surface area, respectively. EPR, XPS, TEM and XANES measurements showed differences in the oxygen vacancy density following the trend rods > octahedra > cubes. AC-HAADF-STEM, XPS and CO-DRIFTS measurements confirmed the presence of only single Pt2+ sites, with different surface platinum surface concentrations. We then compared the performance of the three catalysts in ammonia borane hydrolysis. Precise monitoring of reaction kinetics between 30-80 °C gave Arrhenius plots with hundreds of data points. All plots showed a clear inflection point, the temperature of which (rods > octahedra > cubes) correlates to the energy barrier of ammonia borane diffusion to the Pt sites. These activity differences reflect variations in the - facet dependent - degree of stabilization of intermediates by surface oxygen lone pairs and surface-metal binding strength. Our results show how choosing the right macroscopic support shape can give control over single atom catalysed reactions on the microscopic scale.

Enhancing Activity and Stability of Pd-on-TiO2 Single-Atom Catalyst for Low-Temperature CO Oxidation through in Situ Local Environment Tailoring

The development of efficient Pd single-atom catalysts for CO oxidation, crucial for environmental protection and fundamental studies, has been hindered by their limited reactivity and thermal stability. Here, we report a thermally stable TiO2-supported Pd single-atom catalyst that exhibits enhanced intrinsic CO oxidation activity by tunning the local coordination of Pd atoms via H2 treatment. Our comprehensive characterization reveals that H2-treated Pd single atoms have reduced nearest Pd-O coordination and form short-distanced Pd-Ti coordination, effectively stabilizing Pd as isolated atoms even at high temperatures. During CO oxidation, partial replacement of the Pd-Ti coordination by O or CO occurs. This unique Pd local environment facilitates CO adsorption and promotes the activity of the surrounding oxygen species, leading to superior catalytic performance. Remarkably, the turnover frequency of the H2-treated Pd single-atom catalyst at 120 °C surpasses that of the O2-treated Pd single-atom catalyst and the most effective Pd/Pt single-atom catalysts by an order of magnitude. These findings open up new possibilities for the design of high-performance single-atom catalysts for crucial industrial and environmental applications.

Bioinspired Homonuclear Diatomic Iron Active Site Regulation for Efficient Antifouling Osmotic Energy Conversion

Membrane-based reverse electrodialysis is globally recognized as a promising technology for harnessing osmotic energy. However, its practical application is greatly restricted by the poor anti-fouling ability of existing membrane materials. Inspired by the structural and functional models of natural cytochrome c oxidases (CcO), the first use of atomically precise homonuclear diatomic iron composites as high-performance osmotic energy conversion membranes with excellent anti-fouling ability is demonstrated. Through rational tuning of the atomic configuration of the diatomic iron sites, the oxidase-like activity can be precisely tailored, leading to the augmentation of ion throughput and anti-fouling capacity. Composite membranes featuring direct Fe-Fe motif configurations embedded within cellulose nanofibers (CNF/Fe-DACs-P) surpass state-of-the-art CNF-based membranes with power densities of ca. 6.7 W m-2 and a 44.5-fold enhancement in antimicrobial performance. Combined, experimental characterization and density functional theory simulations reveal that homonuclear diatomic iron sites with metal-metal interactions can achieve ideally balanced adsorption and desorption of intermediates, thus realizing superior oxidase-like activity, enhanced ionic flux, and excellent antibacterial activity.

Recent advances in noble metal-based catalysts for CO oxidation

Carbon monoxide, one of the major pollutants in the air, is mainly produced due to the incomplete combustion of fossil fuels such as coal and oil. Among all the techniques developed for removing CO, catalytic oxidation has been considered one of the most effective approaches, and the commonly used catalysts include metal oxides and noble metals. Noble metal attracted extensive attention due to its good catalytic performance at low temperatures and high resistance to poisoning. The review summarizes the recent advances of noble metals including Pt, Pd, Au, Ru, Rh, and Ir in CO oxidation. The effect of support, metal doping, the particle size of noble metals, and the hydroxyl groups on CO oxidation is discussed. Besides, the metal-support interaction on the stability and activity is also involved in this review. Finally, the challenges and opportunities of supported noble metal catalysts in practical CO oxidation are proposed.

CrSe2 based single-cluster catalysts with controllable charge states for the oxygen reduction and hydrogen evolution reactions

Development of affordable catalysts for the oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) represents a central task for advancing electrochemical systems such as fuel cells and metal-air batteries. This study reported the ORR and HER performance of a set of single cluster catalysts (SCCs) with atomically dispersed 3d/4d/5d transition metal cluster (TM3) embedded in a two-dimensional (2D) defective CrSe2 substrate. Distinguishing from the conventional SCCs with positive charge active center, the unique electronegativity discrepancy between the metal clusters and the substrate renders the active center controllable charge states from negative to positive. Our investigations indicate that the TM3 cluster helps tuning the adsorption performance of the intermediates, and therefore enhancing the electrocatalytic activity of the SCCs. Among all the candidates, we demonstrated that the less reported elements of Ir and Ag exhibit the best performance of HER and ORR with low overpotentials of -0.059 and 0.61 V, respectively. Our work provides a prototype to rationally regulate the charge states of catalysts, which could potentially contribute to the development of new kinds of catalysts and serve as a valuable theoretical reference for the experimental rationalization of SCCs.

Single-Atom Ce-N-C Nanozyme Ameliorates Type 2 Diabetes Mellitus by Improving Glucose Metabolism Disorders and Reducing Oxidative Stress

Type 2 diabetes mellitus (T2DM) as a chronic metabolic disease has become a global public health problem. Insulin resistance (IR) is the main pathogenesis of T2DM. Oxidative stress refers to an imbalance between free radical production and the antioxidant system, causing insulin resistance and contributing to the development of T2DM via several molecular mechanisms. Besides, the reduction in hepatic glycogen synthesis also leads to a decrease in peripheral insulin sensitivity. Thus, reducing oxidative stress and promoting glycogen synthesis are both targets for improving insulin resistance and treating T2DM. The current study aims to investigate the pharmacological effects of single-atom Ce-N-C nanozyme (SACe-N-C) on the improvement of insulin resistance and to elucidate its underlying mechanisms using HFD/STZ-induced C57BL/6J mice and insulin-resistant HepG2 cells. The results indicate that SACe-N-C significantly improves hepatic glycogen synthesis and reduces oxidative stress, as well as pancreatic and liver injury. Specifically, compared to the T2DM model group, fasting blood glucose decreased by 29%, hepatic glycogen synthesis increased by 17.13%, and insulin secretion increased by 18.87%. The sod and GPx in the liver increased by 17.80% and 25.28%, respectively. In terms of mechanism, SACe-N-C modulated glycogen synthesis through the PI3K/AKT/GSK3β signaling pathway and activated the Keap1/Nrf2 pathway to alleviate oxidative stress. Collectively, this study suggests that SACe-N-C has the potential to treat T2DM.

A configuration sampling study of reaction intermediates constituting catalytic cycles for CO oxidation with Pt1/TiO2

We combine ab initio molecular dynamics (AIMD) simulations with an unsupervised machine learning approach to automate the search for possible configurations of CO oxidation reaction intermediates catalyzed by the atomically dispersed Pt1/TiO2 catalyst. Following the example of Roncoroni and co-workers [Phys. Chem. Chem. Phys. 25, 13741 (2023)], we employ t-distributed stochastic neighbor embedding and hierarchical density-based spatial clustering of applications with noise to reduce the dimensionality and cluster AIMD snapshots based on the local coordination environment of Pt. We identify new local minima, particularly in cases where CO2 is bound to the active site, because it can coordinate in various ways with both the metal and support. The new minima constitute additional elementary steps in some proposed pathways for CO oxidation, resulting in turnover frequencies that differ from prior estimates by several orders of magnitude. This work, therefore, demonstrates that configuration sampling is a necessary component of computational studies of catalytic cycles for atomically dispersed catalysts.

Mononuclear metal complex catalysts on supports: foundations in organometallic and surface chemistry and insights into structure, reactivity, and catalysis

Catalysts that consist of isolated metal atoms bonded to solid supports have drawn wide attention by researchers, with recent work emphasizing noble metals on metal oxide and zeolite supports. Progress has been facilitated by methods for atomic-scale imaging the metals and spectroscopic characterization of the supported structures and the nature of metal-support bonding, even with catalysts in the working state. Because of the intrinsic heterogeneity of support surface sites for bonding of metals and the tendency of noble metal cations on supports to be reduced and aggregated, it is challenging to determine structures of individual metal complexes among the mixtures that may be present and to determine structures of catalytically active species and reactive intermediates. A central premise of this perspective is that synthesis of supported metal complexes that have nearly uniform structures-on supports such as dealuminated HY zeolite, chosen to have relatively uniform surfaces-is a key to fundamental understanding, facilitating progress toward determining the roles of the ligands on the metals, which include the supports and reactive intermediates in catalysis. Characterization of relatively uniform and well-defined samples nonetheless requires multiple spectroscopic, microscopic, and theory-based techniques used in concert and still leaves open many questions about the nature of reactive intermediates and catalytic reaction mechanisms.

Enhanced catalytic performance through a single-atom preparation approach: a review on ruthenium-based catalysts

The outstanding catalytic properties of single-atom catalysts (SACs) stem from the maximum atom utilization and unique quantum size effects, leading to ever-increasing research interest in SACs in recent years. Ru-based SACs, which have shown excellent catalytic activity and selectivity, have been brought to the frontier of the research field due to their lower cost compared with other noble catalysts. The synthetic approaches for preparing Ru SACs are rather diverse in the open literature, covering a wide range of applications. In this review paper, we attempt to disclose the synthetic approaches for Ru-based SACs developed in the most recent years, such as defect engineering, coordination design, ion exchange, the dipping method, and electrochemical deposition etc., and discuss their representative applications in both electrochemical and organic reaction fields, with typical application examples given of: Li-CO2 batteries, N2 reduction, water splitting and oxidation of benzyl alcohols. The mechanisms behind their enhanced catalytic performance are discussed and their structure-property relationships are revealed in this review. Finally, future prospects and remaining unsolved issues with Ru SACs are also discussed so that a roadmap for the further development of Ru SACs is established.

A Multitechnique Study of C2H4 Adsorption on a Model Single-Atom Rh1 Catalyst

Single-atom catalysts are potentially ideal model systems to investigate structure-function relationships in catalysis if the active sites can be uniquely determined. In this work, we study the interaction of C2H4 with a model Rh/Fe3O4(001) catalyst that features 2-, 5-, and 6-fold coordinated Rh adatoms, as well as Rh clusters. Using multiple surface-sensitive techniques in combination with calculations of density functional theory (DFT), we follow the thermal evolution of the system and disentangle the behavior of the different species. C2H4 adsorption is strongest at the 2-fold coordinated Rh1 with a DFT-determined adsorption energy of -2.26 eV. However, desorption occurs at lower temperatures than expected because the Rh migrates into substitutional sites within the support, where the molecule is more weakly bound. The adsorption energy at the 5-fold coordinated Rh sites is predicated to be -1.49 eV, but the superposition of this signal with that from small Rh clusters and additional heterogeneity leads to a broad C2H4 desorption shoulder in TPD above room temperature.

Atomically dispersed single-atom catalysts (SACs) and enzymes (SAzymes): synthesis and application in Alzheimer's disease detection

Alzheimer's disease (AD) is a progressive neurodegenerative disorder characterized by cognitive decline and memory loss. Conventional diagnostic methods, such as neuroimaging and cerebrospinal fluid analysis, typically detect AD at advanced stages, limiting the efficacy of therapeutic interventions. Early detection is crucial for improving patient condition by enabling timely administration of treatments that may decelerate disease progression. In this context, single-atom catalysts (SACs) and single-atom nanozymes (SAzymes) have emerged as promising tools offering highly sensitive and selective detection of Alzheimer's biomarkers. SACs, consisting of isolated metal atoms on a support surface, deliver unparalleled atomic efficiency, increased reactivity, and reduced operational costs, although certain challenges in terms of stability, aggregation, and other factors persist. The advent of SAzymes, which integrate SACs with natural metalloprotease catalysts, has further advanced this field by enabling controlled electronic exchange, synergistic productivity, and enhanced biosafety. Particularly, M-N-C SACs with M-Nx active sites mimic the selectivity and sensitivity of natural metalloenzymes, providing a robust platform for early detection of AD. This review encompasses the advancements in SACs and SAzymes, highlighting their pivotal role in bridging the gap between conventional enzymes and nanozyme and offering enhanced catalytic efficiency, controlled electron transfer, and improved biosafety for Alzheimer's detection.

Advancing Heterogeneous Organic Synthesis With Coordination Chemistry-Empowered Single-Atom Catalysts

For traditional metal complexes, intricate chemistry is required to acquire appropriate ligands for controlling the electron and steric hindrance of metal active centers. Comparatively, the preparation of single-atom catalysts is much easier with more straightforward and effective accesses for the arrangement and control of metal active centers. The presence of coordination atoms or neighboring functional atoms on the supports' surface ensures the stability of metal single-atoms and their interactions with individual metal atoms substantially regulate the performance of metal active centers. Therefore, the collaborative interaction between metal and the surrounding coordination environment enhances the initiation of reaction substrates and the formation and transformation of crucial intermediate compounds, which imparts single-atom catalysts with significant catalytic efficacy, rendering them a valuable framework for investigating the correlation between structure and activity, as well as the reaction mechanism of catalysts in organic reactions. Herein, comprehensive overviews of the coordination interaction for both homogeneous metal complexes and single-atom catalysts in organic reactions are provided. Additionally, reflective conjectures about the advancement of single-atom catalysts in organic synthesis are also proposed to present as a reference for later development.

A General Metal Ion Recognition Strategy to Mediate Dual-Atomic-Site Catalysts

Heterogeneous dual-atomic-site catalysts (DACs) hold great potential for diverse applications. However, to date, the synthesis of DACs primarily relies on different atoms freely colliding on the support during synthesis, principally leading to low yields. Herein, we report a general metal ion recognition (MIR) strategy for constructing a series of DACs, including but not limited to Fe1Sn1, Fe1Co1, Fe1Ni1, Fe1Cu1, Fe1Mn1, Co1Ni1, Co1Cu1, Co2, and Cu2. This strategy is achieved by coupling target inorganometallic cations and anions as ion pairs, which are sequentially adsorbed onto a nitrogen-doped carbon substrate as the precursor. Taking the oxygen reduction reaction as an example, we demonstrated that the Fe1Sn1-DAC synthesized through this strategy delivers a record peak power density of 1.218 W cm-2 under 2.0 bar H2-O2 conditions and enhanced stability compared to the single-atom-site FeN4. Further study revealed that the superior performance arises from the synergistic effect of Fe1Sn1 dual vicinal sites, which effectively optimizes the adsorption of *OH and alleviates the troublesome Fenton-like reaction.

Computational screening of pyrazine-based graphene-supported transition metals as single-atom catalysts for the nitrogen reduction reaction

Electrochemical synthesis of NH3 from N2 utilizing single-atom catalysts (SACs) is a promising strategy for industrial nitrogen fixation and chemical raw material production. In this work, single transition metals (TMs) anchored on pyrazine-based graphene (TM@py-GY) are systematically studied to screen potential electrocatalysts for the nitrogen reduction reaction (NRR) using first-principles calculations. Particularly, the descriptor φ related to electronegativity and valence electron number is selected to clarify the trend of NRR activity, realizing a fast-scan/estimation among various candidates. After a four-step screening process, WI@py-GY and MoII@py-GY SACs are screened with good structural stability, high selectivity, and high activity. Meanwhile, the thermodynamic stability of WI@py-GY and MoII@py-GY SACs is demonstrated to ensure their feasibility in real experimental conditions. Furthermore, electronic properties are also examined in detail to analyze activity origin. This work not only provides an effective and reliable method for screening electrochemical NRR catalysts with excellent performance but also provides guidance for the rational design of SACs.

Silver and g-C3N4 co-modified biochar (Ag-CN@BC) for enhancing photocatalytic/PDS degradation of BPA: Role of carrier and photoelectric mechanism

Photocatalytic property of nano Ag is weak and its enhancement is important to enlarge its application. Herein, a novel strategy of constructing silver g-C3N4 biochar composite (Ag-CN@BC) as photocatalyst is developed and its photocatalytic degradation of bisphenol A (BPA) coupled with peroxydisulfate (PDS) oxidation process is characterized. Characterization result showed that silver was evenly embedded into the g-C3N4 structure of the nitrogen atoms format, impeding agglomeration of Ag by distributing stably on biochar. In optimum condition, BPA of 10 mg/L could be degraded completely at pH of 9.0 with a 0.5 g/L photocatalyst, 2 mM PDS in Ag-CN@BC-2 (Ag/melamine molar ratio of 0.5)/PDS system (99.2%, k = 4.601 h-1). Ag-CN@BC shows superior mineralization ratio in degrading BPA to CO₂ and H₂O via active radical way, including holes (h⁺), superoxide radicals (•O2⁻), sulfate radicals (SO4•⁻), and hydroxyl radicals (•OH). Proper amount of silver can be dispersed effectively by gC3N4, which is responsible for improving the visible-light absorbing capability and accelerate charge transfer during activation of PDS for BPA degradation, while biochar as carrier in the composite is supposed to enhance the photoelectric degradation of BPA by reducing the band gap and increasing the photocurrent of Ag-CN@BC catalyst. Ag-CN@BC exhibits excellent catalyst stability and photocatalytic activity for treatment of toxic organic contaminants in the environment.

Electronic Structure Regulated Carbon-Based Single-Atom Catalysts for Highly Efficient and Stable Electrocatalysis

Single-atom-catalysts (SACs) with atomically dispersed sites on carbon substrates have attained great advancements in electrocatalysis regarding maximum atomic utilization, unique chemical properties, and high catalytic performance. Precisely regulating the electronic structure of single-atom sites offers a rational strategy to optimize reaction processes associated with the activation of reactive intermediates with enhanced electrocatalytic activities of SACs. Although several approaches are proposed in terms of charge transfer, band structure, orbital occupancy, and the spin state, the principles for how electronic structure controls the intrinsic electrocatalytic activity of SACs have not been sufficiently investigated. Herein, strategies for regulating the electronic structure of carbon-based SACs are first summarized, including nonmetal heteroatom doping, coordination number regulating, defect engineering, strain designing, and dual-metal-sites scheming. Second, the impacts of electronic structure on the activation behaviors of reactive intermediates and the electrocatalytic activities of water splitting, oxygen reduction reaction, and CO2/N2 electroreduction reactions are thoroughly discussed. The electronic structure-performance relationships are meticulously understood by combining key characterization techniques with density functional theory (DFT) calculations. Finally, a conclusion of this paper and insights into the challenges and future prospects in this field are proposed. This review highlights the understanding of electronic structure-correlated electrocatalytic activity for SACs and guides their progress in electrochemical applications.

Coordination engineering of single-atom ruthenium in 2D MoS2 for enhanced hydrogen evolution

This study investigates the enhancement of catalytic activity in single-atom catalysts (SACs) through coordination engineering. By introducing non-metallic atoms (X = N, O, or F) into the basal plane of MoS2 via defect engineering and subsequently anchoring hetero-metallic Ru atoms, we created 10 types of non-metal-coordinated Ru SACs (Ru-X-MoS2). Computations indicate that non-metal atom X significantly modifies the electronic structure of Ru, optimizing the hydrogen evolution reaction (HER). Across acidic, neutral, and alkaline electrolytes, Ru-X-MoS2 catalysts exhibit significantly improved HER performance compared with Ru-MoS2, even surpassing commercial Pt/C catalysts. Among these, the Ru-O-MoS2 catalyst, characterized by its asymmetrically coordinated O2-Ru-S1 active sites, demonstrates the most favorable electrocatalytic behavior and exceptional stability across all pH ranges. Consequently, single-atom coordination engineering presents a powerful strategy for enhancing SAC catalytic performance, with promising applications in various fields.

Electron Transfer Induced by the Change of Spin States as a Catalytic Descriptor on C2N-TM Single-Atom Catalysts

The catalytic activity and selectivity of metal single-atom catalysts strongly depend upon their spin states. However, their intrinsic connections are not yet clear. In this work, we evaluate the catalytic activity and selectivity of oxygen reduction reactions (ORRs) on C2N-supporting 3d transition metal (TM = Mn/Co/Ni/Cu) single-atom catalysts (SACs) using the density functional theory calculations. It is found that all of the SACs with different spin states tend to follow the 2e- H2O2 pathway, except for C2N-Mn (S = 1/2), which takes the 4e- OOH pathway. Interestingly, we found that the sum of the changes in the electron spin moments of the metal active centers and the reaction intermediate OOH affects the OOH electron transfer, and the electron transfer promotes the catalytic activity of the 2e- H2O2 pathway on C2N-TM SACs. Moreover, there is a strong linear relationship between the OOH electron transfer and the catalytic activity of the 2e- H2O2 pathway on C2N-TM SACs. These findings indicate that electron transfer induced by the change of spin states serves as a descriptor of the catalytic activity of the 2e- H2O2 pathway on C2N-TM SACs, which is very helpful for designing more powerful SACs.

A General Strategy Based on Hetero-Charge Coupling Effect for Constructing Single-Atom Sites

Single-atom catalysts have emerged as cutting-edge hotspots in the field of material science owing to their excellent catalytic performance brought about by well-defined metal single-atom sites (M SASs). However, huge challenges still lie in achieving the rational design and precise synthesis of M SASs. Herein, we report a novel synthesis strategy based on the hetero-charge coupling effect (HCCE) to prepare M SASs loaded on N and S co-doped porous carbon (M1/NSC). The proposed strategy was widely applied to prepare 17 types of M1/NSC composed of single or multi-metal with the integrated regulation of the coordination environment and electronic structure, exhibiting good universality and flexible adjustability. Furthermore, this strategy provided a low-cost method of efficiently synthesizing M1/NSC with high yields, that can produce more than 50 g catalyst at one time, which is key to large-scale production. Among various as-prepared unary M1/NSC (M can be Fe, Co, Ni, V, Cr, Mn, Mo, Pd, W, Re, Ir, Pt, or Bi) catalysts, Fe1/NSC delivered excellent performance for electrocatalytic nitrate reduction to NH3 with high NH3 Faradaic efficiency of 86.6 % and high NH3 yield rate of 1.50 mg h-1 mgcat. -1 at -0.6 V vs. RHE. Even using Fe1/NSC as a cathode in a Zn-nitrate battery, it exhibited a high open circuit voltage of 1.756 V and high energy density of 4.42 mW cm-2 with good cycling stability.