Regioregular narrow-bandgap-conjugated polymers for plastic electronics

Synthesis of Regioregular and Random Boron-Fused Azomethine Conjugated Polymers for Film Morphology Control

Regioregular and random conjugated polymers based on a boron-fused azomethine unit were synthesized by Sonogashira-Hagihara cross coupling reaction. Although these polymers exhibited similar optical properties in the solution states, a distinct difference was observed in the aggregation forming ability in the film states; scanning electron microscope (SEM) observation indicated the existence of fiber-like aggregates in the spin-coated film of the regioregular polymer, while regiorandom polymer showed no aggregate in the film state. Accordingly, the UV-vis absorption spectrum of the regioregular polymer showed an increased shoulder peak due to the aggregate formation, whereas the random one showed no change. Furthermore, an absolute fluorescence quantum efficiency of the regioregular polymer was enhanced in response to the aggregate disassembly via thermal annealing treatment. In this study, we demonstrate that controlling regioregularity of the conjugated polymers can induce the different morphological structures and thermal-responsive behaviors. These findings could be beneficial for the design strategy and potential applications of thin-film optoelectronic devices with stimuli-responsive properties.

High-speed flexible near-infrared organic photodiode for optical communication

Optical communication is a particularly compelling technology for tackling the speed and capacity bottlenecks in data communication in modern society. Currently, the silicon photodetector plays a dominant role in high-speed optical communication across the visible-near-infrared spectrum. However, its intrinsic rigid structure, high working bias and low responsivity essentially limit its application in next-generation flexible optoelectronic devices. Herein, we report a narrow-bandgap non-fullerene acceptor (NFA) with a remarkable π-extension in the direction of both central and end units (CH17) with respect to the Y6 series, which demonstrates a more effective and compact 3D molecular packing, leading to lower trap states and energetic disorders in the photoactive film. Consequently, the optimized solution-processed organic photodetector (OPD) with CH17 exhibits a remarkable response time of 91 ns (λ = 880 nm) due to the high charge mobility and low parasitic capacitance, exceeding the values of most commercial Si photodiodes and all NFA-based OPDs operating in self-powered mode. More significantly, the flexible OPD exhibits negligible performance attenuation (<1%) after bending for 500 cycles, and maintains 96% of its initial performance even after 550 h of indoor exposure. Furthermore, the high-speed OPD demonstrates a high data transmission rate of 80 MHz with a bit error rate of 3.5 [Formula: see text] 10-4, meaning it has great potential in next-generation high-speed flexible optical communication systems.

Engineering organic polymers as emerging sustainable materials for powerful electrocatalysts

Cost-effective and high-efficiency catalysts play a central role in various sustainable electrochemical energy conversion technologies that are being developed to generate clean energy while reducing carbon emissions, such as fuel cells, metal-air batteries, water electrolyzers, and carbon dioxide conversion. In this context, a recent climax in the exploitation of advanced earth-abundant catalysts has been witnessed for diverse electrochemical reactions involved in the above mentioned sustainable pathways. In particular, polymer catalysts have garnered considerable interest and achieved substantial progress very recently, mainly owing to their pyrolysis-free synthesis, highly tunable molecular composition and microarchitecture, readily adjustable electrical conductivity, and high stability. In this review, we present a timely and comprehensive overview of the latest advances in organic polymers as emerging materials for powerful electrocatalysts. First, we present the general principles for the design of polymer catalysts in terms of catalytic activity, electrical conductivity, mass transfer, and stability. Then, the state-of-the-art engineering strategies to tailor the polymer catalysts at both molecular (i.e., heteroatom and metal atom engineering) and macromolecular (i.e., chain, topology, and composition engineering) levels are introduced. Particular attention is paid to the insightful understanding of structure-performance correlations and electrocatalytic mechanisms. The fundamentals behind these critical electrochemical reactions, including the oxygen reduction reaction, hydrogen evolution reaction, CO2 reduction reaction, oxygen evolution reaction, and hydrogen oxidation reaction, as well as breakthroughs in polymer catalysts, are outlined as well. Finally, we further discuss the current challenges and suggest new opportunities for the rational design of advanced polymer catalysts. By presenting the progress, engineering strategies, insightful understandings, challenges, and perspectives, we hope this review can provide valuable guidelines for the future development of polymer catalysts.

A skeletal randomization strategy for high-performance quinoidal-aromatic polymers

Enhancing the solution-processability of conjugated polymers (CPs) without diminishing their thin-film crystallinity is crucial for optimizing charge transport in organic field-effect transistors (OFETs). However, this presents a classic "Goldilocks zone" dilemma, as conventional solubility-tuning methods for CPs typically yield an inverse correlation between solubility and crystallinity. To address this fundamental issue, a straightforward skeletal randomization strategy is implemented to construct a quinoid-donor conjugated polymer, PA4T-Ra, that contains para-azaquinodimethane (p-AQM) and oligothiophenes as repeat units. A systematic study is conducted to contrast its properties against polymer homologues constructed following conventional solubility-tuning strategies. An unusually concurrent improvement of solubility and crystallinity is realized in the random polymer PA4T-Ra, which shows moderate polymer chain aggregation, the highest crystallinity and the least lattice disorder. Consequently, PA4T-Ra-based OFETs, fabricated under ambient air conditions, deliver an excellent hole mobility of 3.11 cm2 V-1 s-1, which is about 30 times higher than that of the other homologues and ranks among the highest for quinoidal CPs. These findings debunk the prevalent assumption that a random polymer backbone sequence results in decreased crystallinity. The considerable advantages of the skeletal randomization strategy illuminate new possibilities for the control of polymer aggregation and future design of high-performance CPs, potentially accelerating the development and commercialization of organic electronics.

Conjugated Polymers for Aptasensing Applications

Rapid and specific assaying of molecules that report on a pathophysiological condition, environmental pollution, or drug concentration is pivotal for establishing efficient and accurate diagnostic systems. One of the main components required for the construction of these systems is the recognition element (receptor) that can identify target analytes. Oligonucleotide switching structures, or aptamers, have been widely studied as selective receptors that can precisely identify targets in different analyzed matrices with minimal interference from other components in an antibody-like recognition process. These aptasensors, especially when integrated into sensing platforms, enable a multitude of sensors that can outperform antibody-based sensors in terms of flexibility of the sensing strategy and ease of deployment to areas with limited resources. Research into compounds that efficiently enhance signal transduction and provide a suitable platform for conjugating aptamers has gained huge momentum over the past decade. The multifaceted nature of conjugated polymers (CPs), notably their versatile electrical and optical properties, endows them with a broad range of potential applications in optical, electrical, and electrochemical signal transduction. Despite the substantial body of research demonstrating the enhanced performance of sensing devices using doped or nanostructure-embedded CPs, few reviews are available that specifically describe the use of conjugated polymers in aptasensing. The purpose of this review is to bridge this gap and provide a comprehensive description of a variety of CPs, from a historical viewpoint, underpinning their specific characteristics and demonstrating the advances in biosensors associated with the use of these conjugated polymers.

How Regiochemistry Influences Aggregation Behavior and Charge Transport in Conjugated Organosulfur Polymer Cathodes for Lithium-Sulfur Batteries

For lithium-sulfur (Li-S) batteries to become competitive, they require high stability and energy density. Organosulfur polymer-based cathodes have recently shown promising performance due to their ability to overcome common limitations of Li-S batteries, such as the insulating nature of sulfur. In this study, we use a multiscale modeling approach to explore the influence of the regiochemistry of a conjugated poly(4-(thiophene-3-yl)benzenethiol) (PTBT) polymer on its aggregation behavior and charge transport. Classical molecular dynamics simulations of the self-assembly of polymer chains with different regioregularity show that a head-to-tail/head-to-tail regularity can form a well-ordered crystalline phase of planar chains allowing for fast charge transport. Our X-ray diffraction measurements, in conjunction with our predicted crystal structure, confirm the presence of crystalline phases in the electropolymerized PTBT polymer. We quantitatively describe the charge transport in the crystalline phase in a band-like regime. Our results give detailed insights into the interplay between microstructural and electrical properties of conjugated polymer cathode materials, highlighting the effect of polymer chain regioregularity on its charge transport properties.

Design new organic material based on triphenylamine (TPA) with D-π-A-π-D structure used as an electron donor for organic solar cells: A DFT approach

Because of the increasing scarcity of fossil fuels and the growing need for energy, it has become necessary to research new renewable energy resources. In this study, five new high-performance materials (TP-FA₁F-TP - TP-FA₅F-TP) of the D-π-A-π-D configuration based on triphenylamine (TPA) were theoretically investigated by applying DFT and TD-DFT methods for future application as heterojunction organic solar cells (BHJ). The influence of the modification of the acceptor (A) of the parent molecule TP-FTzF-TP on the structural, electronic, photovoltaic and optical properties of the TP-FA1F-TP - TP-FA5F-TP organic molecules was investigated in detail. TP-FA₁F-TP - TP-FA₅F-TP showed E_gap in the interval of 1.44-2.01 eV with λ_abs in the range of 536-774 nm, open-circuit voltage (V_oc) values varied between 0.3 and 0.56 V and power conversion efficiencies (PCE) ranging from (3-6) %. Our results also show that the donor molecules suggested in this research exhibit an improved performance compared to the recently synthesized TP-FTzF-TP, such as a lowest HOMO energy, a smaller E_gap, and a greater absorption spectrum, and can lead to higher performance. Indeed, this theoretical research could lead to the future synthesis of better compounds as active substances used in BHJ.

Record-High Electron Mobility Exceeding 16 cm2 V- 1 s- 1 in Bisisoindigo-Based Polymer Semiconductor with a Fully Locked Conjugated Backbone

Polymer semiconductors with mobilities exceeding 10 cm² V^{- 1} s^{- 1} , especially ambipolar and n-type polymer semiconductors, are still rare, although they are of great importance for fabricating polymer field-effect transistors (PFETs) toward commercial high-grade electronics. Herein, two novel donor-acceptor copolymers, PNFFN-DTE and PNFFN-FDTE, are designed and synthesized based on the electron-deficient bisisoindigo (NFFN) and electron-rich dithienylethylenes (DTE or FDTE). The copolymer PNFFN-DTE, containing NFFN and DTE, possesses a partially locked polymeric conjugated backbone, whereas PNFFN-FDTE, containing NFFN and FDTE, has a fully locked one. Fluorine atoms in FDTE not only induce the formation of additional CH∙∙∙F hydrogen bonds, but also lower frontier molecular orbitals for PNFFN-FDTE. Both PNFFN-DTE and PNFFN-FDTE form more ordered molecular packing in thin films prepared from a polymer solution in bicomponent solvent containing 1,2-dichlorobenzene (DCB) and 1-chloronaphthalene (with volume ratio of 99.2/0.8) than pure DCB. The two copolymers-based flexible PFETs exhibit ambipolar charge-transport properties. Notably, the bicomponent solvent-processed PNFFN-FDTE-based PFETs afford a high electron mobility of 16.67 cm² V^-1 s^-1 , which is the highest electron-transport mobility for PFETs reported so far. The high electron mobility of PNFFN-FDTE is attributed to its fully locked conjugated backbone, dense molecular packing, and much matched LUMO energy level.

Carbon-Carbon Linked Organic Frameworks: An Explicit Summary and Analysis

Organic frameworks with carbon-carbon (CC) linkage are an important class of materials owing to their outstanding chemical stability and extended π-electron delocalization resulting in unique optoelectronic properties. In the first part of this review article, the design principles for the bottom-up synthesis of 2D and 3D sp/sp² CC linked organic frameworks are summarized. Representative reaction methodologies, such as Knoevenagel condensation, Aldol condensation, Horner-Wadsworth-Emmons reaction, Wittig reaction, and coupling reactions (Ullmann, Suzuki, Heck, Yamamoto, etc.) are included. This is discussed in the context of their reaction mechanism, reaction dynamics, and whether and why resulting in an amorphous or crystalline product. This is followed by a discussion of different state-of-the art bottom-up synthesis methodologies, like solvothermal, interfacial, and solid-state synthesis. In the second part, the structure-property relationships in CC linked organic frameworks with representative examples of organocatalysis, photo(electro)catalysis, energy storage and conversion, magnetism, and molecular storage and separation are analyzed. The importance of linkage type, building blocks, topology, and crystallinity of the framework material in connection with the structure-property relationship is highlighted. Finally, brief concluding remarks are presented based on the key development of bottom-up synthetic methods and provide perspectives for future development in this field.

Dopant-Stabilized Assembly of Poly(3-hexylthiophene)

Polymer self-assembly is a powerful approach for forming nanostructures for solution-phase applications. However, polymer semiconductor assembly has primarily been driven by solvent interactions. Here, we report poly(3-hexythiophene) homopolymer assembly driven and stabilized by oxidative doping with iron (III) p-toluenesulfonate in benzonitrile. By this improved method, dopant mol % and addition temperature determine the size and morphology of oxidized polymer nanostructures. The dopant counterion provides colloidal stability in a process of dopant-stabilized assembly (DSA). Each variable governing polymer assembly is systematically varied, revealing general principles of oxidized nanostructure assembly and allowing the polymer planarity, optical absorption, and doping level to be modulated. Oxidized nanostructure heights, lengths, and widths are shown to depend on these properties, which we hypothesize is due to competing nanostructure formation and oxidation mechanisms that are governed by the polymer conformation upon doping. Finally, we demonstrate that the nanoparticle oxidative doping level can be tuned post-formation through sequential dopant addition. By revealing the fundamental processes underlying DSA, this work provides a powerful toolkit to control the assembly and optoelectronic properties of oxidatively doped nanostructures in solution.

Bihalogenated Thiophene-Based Terpolymers for High-Performance Semitransparent Organic Solar Cells Processed by an Eco-Friendly Solvent and Layer-by-Layer Deposition

The development of photoactive materials simultaneously satisfying high performance, low cost, and eco-friendly processability remains challenging in organic solar cells (OSCs). Herein, a synergistic strategy is proposed to design three terpolymers (PM7(ClCl = 0.2), PM7(ClBr = 0.2), and PM7(BrBr = 0.2)) based on bihalogenated thiophenes with relatively low cost, for improving the optical and electrochemical properties, solubility in nontoxic solvents, and crystallinity and miscibility balance. In summary, a bulk-heterojunction (BHJ)-processed device based on PM7(ClCl = 0.2) with 20% dichlorinated thiophene achieves the highest power conversion efficiency (PCE) of 15.2% using toluene (best PCE ≈ 15.8% on the ternary blend). Moreover, high-performance semitransparent OSCs (ST-OSCs) were fabricated by a combination of layer-by-layer (LBL) and sequential dynamic and static spin-coating techniques according to the molecular weight of PM7(ClCl = 0.2). Using this unique LBL strategy, the PM7(ClCl = 0.2)-MW (H; high molecular weight)-processed ST-OSCs yield a high PCE of 11.5% and an average visible transmittance (AVT) of 27.1% with outstanding tolerance to device reproducibility. By optimizing ST-OSCs with tungsten trioxide as a distributed Bragg reflector, a light utilization efficiency (LUE) of 3.61% is realized with a PCE of 10.8% and an AVT of 33.4% (certified PCE ≈ 11.157%; LUE ≈ 3.73%). This study provides a novel perspective for designing and developing actual photoactive materials for OSC commercialization.

Design strategies for improving the crystallinity of covalent organic frameworks and conjugated polymers: a review

Highly crystalline covalent organic frameworks (COFs) or conjugated polymers (CPs) are very important and highly desirable because these materials would display better performance in diverse devices and provide more structure-property related information. However, how to achieve highly crystalline or single-crystal COFs and CPs is very challenging. Recently, many research studies have demonstrated the possibility of enhancing the crystallinity of COFs and CPs. Thus, it is timely to offer an overview of the important progress in improving the crystallinity of COFs and CPs from the viewpoint of design strategies. These strategies include polycondensation reaction optimization, improving the planarity, fluorine substitution, side chain engineering, and so on. Furthermore, the challenges and perspectives are also discussed to promote the realization of highly crystalline or single-crystal COFs and CPs.

Triphenyleno[1,2-c:7,8-c']bis([1,2,5]thiadiazole) as a V-Shaped Electron-Deficient Unit to Construct Wide-Bandgap Amorphous Polymers for Efficient Organic Solar Cells

The backbone shape of semiconducting polymers strongly affects their electronic properties and morphologies in films, yet the conventional design principle for building blocks focuses on using linear main chains to maintain high crystallinity. Here, we developed a V-shaped unit, triphenyleno[1,2-c:7,8-c']bis([1,2,5]thiadiazole) (TPTz), featuring two 1,2,5-thiadiazole rings fused to a triphenylene core with strong electron-withdrawing properties and an extended conjugation plane. We used TPTz to prepare a highly soluble copolymer, PTPTz-indacenodithiophene (IDT), which exhibited a wide bandgap of 1.94 eV and energy levels suitable for the donor polymer in organic solar cells (OSCs) in combination with non-fullerene acceptors. Despite the amorphous nature of the polymer film, single-junction OSCs with PTPTz-IDT:Y6 as the active layer achieved a power conversion efficiency of 10.4% (J_SC = 19.8 mA cm^-2; V_OC = 0.80 V; fill factor = 0.66), which is the highest value reported for a single-junction OSC with IDT-based donor polymers. This work demonstrates that TPTz is a promising electron-acceptor unit for developing functional polymers with zigzag structures.

Effect of Bulky Atom Substitution on Backbone Coplanarity and Electrical Properties of Cyclopentadithiophene-Based Semiconducting Polymers

The effect of atomic substitution on the optoelectronic properties of a coplanar donor-acceptor (D-A) semiconducting polymer (SPs), prepared using cyclopentadithiophene (CDT) and 2,1,3-benzothiadiazole (BT) moieties, is investigated. By substituting a carbon atom in the BT unit with CF or C-Cl, two random D-A SPs are prepared, and their optoelectronic properties are thoroughly investigated. Density functional theory calculations demonstrate that the fluorinated polymer has a slightly smaller dihedral angle (ϴ = 0.6°) than the pristine polymer (ϴ = 1.9°) in its lowest-energy conformation, implying efficient charge transport through the coplanar backbone of the fluorinated polymer. However, the chlorinated polymer shows the lowest energy at a relatively larger dihedral angle (ϴ = 139°) due to the steric hindrance induced by bulky chlorine atoms in the backbone, thereby leading to thin-film morphology, which is unfavorable for charge transport. Consequently, the fluorinated polymer yields the highest field-effect mobility (μ) of 0.57 cm² V^-1 s^-1 , slightly higher than that of the pristine polymer (μ = 0.33 cm² V^-1 s^-1 ), and the extended device lifetime of organic field-effect transistors over 12 d without any encapsulation layers. The results of this study provide design guidelines for air-stable D-A SPs.

Programmable Assembly of π-Conjugated Polymers

π-Conjugated polymers have numerous applications due to their advantageous optoelectronic and mechanical properties. These properties depend intrinsically on polymer ordering, including crystallinity, orientation, morphology, domain size, and π-π interactions. Programming, or deliberately controlling the composition and ordering of π-conjugated polymers by well-defined inputs, is a key facet in the development of organic electronics. Here, π-conjugated programming is described at each stage of material development, stressing the links between each programming mode. Covalent programming is performed during polymer synthesis such that complex architectures can be constructed, which direct polymer assembly by governing polymer orientation, π-π interactions, and morphological length-scales. Solution programming is performed in a solvated state as polymers dissolve, aggregate, crystallize, or react in solution. Solid-state programming occurs in the solid state and is governed by polymer crystallization, domain segregation, or gelation. Recent progress in programming across these stages is examined, highlighting order-dependent features and assembly techniques that are unique to π-conjugated polymers. This should serve as a guide for delineating the many ways of directing π-conjugated polymer assembly to control ordering, structure, and function, enabling the further development of organic electronics.

Interfacial Engineering of Hybrid Polydopamine/Polypyrrole Nanosheets with Narrow Band Gaps for Fluorescence Sensing of MicroRNA

Nanoquencher-based biosensors have emerged as powerful tools for the detection of tumor markers, where challenges in efficiently docking the π-electron interaction interface toward nucleic acid probes containing π-electron-rich units of bases and fluorescent dyes still remain. Herein, we present hybrid polydopamine/polypyrrole nanosheets (PDA-PPy-NS) with π electron coupling and ultranarrow band gap (0.29 eV) by interfacial engineering of polymer hybrids at the nanoscale. PDA-PPy-NS were first prepared through oxidant-induced polymerization of pyrrole on PDA nanosheets. By utilizing fluorescent-dye-labeled single-stranded DNA as a probe, the hybrid nanoquencher showed ultrahigh fluorescence quenching ability, i.e., a Cy5-ssDNA/nanoquencher mass ratio of 36.9 under the complete quenching condition, which is comparable to that of graphene oxide. It was demonstrated that the energy level coupling of nanosheets and nucleic acid dye (Cy5) was the key factor contributing to the efficient photoinduced electron transfer (PET). Subsequently, the nanoquencher/DNA probe was proved to possess superior sensitivity and selectivity for efficient and reliable detection of miRNA-21 with a detection limit of 23.1 pM. Our work proves that the π-electron-rich biosensor interface can significantly enhance the PET efficiency, providing a theoretical basis for developing novel high-performance sensors.

Probing morphology and chemistry in complex soft materials within situresonant soft x-ray scattering

Small angle scattering methodologies have been evolving at fast pace over the past few decades due to the ever-increasing demands for more details on the complex nanostructures of multiphase and multicomponent soft materials like polymer assemblies and biomaterials. Currently, element-specific and contrast variation techniques such as resonant (elastic) soft/tender x-ray scattering, anomalous small angle x-ray scattering, and contrast-matching small angle neutron scattering, or combinations of above are routinely used to extract the chemical composition and spatial arrangement of constituent elements at multiple length scales and examine electronic ordering phenomena. Here we present some recent advances in selectively characterizing structural architectures of complex soft materials, which often contain multi-components with a wide range of length scales and multiple functionalities, where novel resonant scattering approaches have been demonstrated to decipher a higher level of structural complexity that correlates to functionality. With the advancement of machine learning and artificial intelligence assisted correlative analysis, high-throughput and autonomous experiments would open a new paradigm of material research. Further development of resonant x-ray scattering instrumentation with crossplatform sample environments will enable multimodalin situ/operando characterization of the system dynamics with much improved spatial and temporal resolution.

Efficiency improvement of P3CT-Na based MAPbI3solar cells with a simple wetting process

The averaged power conversion efficiency of polyelectrolytes (P3CT-Na) based MAPbI₃solar cells can be increased from 14.94% to 17.46% with a wetting method before the spin-coating process of MAPbI₃precursor solutions. The effects of the wetting process on the surface, structural, optical and excitonic properties of MAPbI₃thin films are investigated by using the atomic-force microscopic images, x-ray diffraction patterns, transmittance spectra, photoluminescence spectra and Raman scattering spectra. The experimental results show that the wetting process of MAPbI₃precursor solution on top of the P3CT-Na/ITO/glass substrate can be used to manipulate the molecular packing structure of the P3CT-Na thin film, which determines the formation of MAPbI₃thin films.

The Effect of Physical Cues of Biomaterial Scaffolds on Stem Cell Behavior

Stem cells have been sought as a promising cell source in the tissue engineering field due to their proliferative capacity as well as differentiation potential. Biomaterials have been utilized to facilitate the delivery of stem cells in order to improve their engraftment and long-term viability upon implantation. Biomaterials also have been developed as scaffolds to promote stem cell induced tissue regeneration. This review focuses on the latter where the biomaterial scaffold is designed to provide physical cues to stem cells in order to promote their behavior for tissue formation. Recent work that explores the effect of scaffold physical properties, topography, mechanical properties and electrical properties, is discussed. Although still being elucidated, the biological mechanisms, including cell shape, focal adhesion distribution, and nuclear shape, are presented. This review also discusses emerging areas and challenges in clinical translation.

Influence of Regioregularity on the Optoelectronic Properties of Conjugated Diketopyrrolopyrrole Polymers Comprising Asymmetric Monomers

Two asymmetric thiophene (T)/pyridine (Py) flanked diketopyrrolopyrrole (DPP) polymers with a regiorandom and regioregular conjugated backbone are synthesized via a Stille polycondensation to investigate the effect of regioregularity on their optoelectronic properties and photovoltaic performance in fullerene-based polymer solar cells. Surprisingly, both polymers possess very similar optical bandgap, energy levels, and photovoltaic performance. These findings, combined with a factor of 19 reactivity difference between the two end groups of the asymmetric DPP monomer, intuitively suggest the formation of regular chain segments in the random polymer. However, by modeling the random polymerization reaction with a kinetic Monte Carlo (KMC) simulation, evidence is obtained for exclusive formation of a fully random polymer structure. UV-vis-NIR absorption spectra of three extended DPP chromophores, containing the donor segments (T-T-T, Py-T-Py, and Py-T-T) present in the regiorandom polymer, confirm that regioregularity of the backbone has a negligible influence on the optical properties.

Configurationally Random Polythiophene for Improved Polymer Ordering and Charge-Transporting Ability

Random polythiophene polymers are characterized by the arbitrary sequences of monomeric units along polymer backbones. These untailored orientations generally result in the twisting of thiophene rings out of the conjugation planarity in addition to steric repulsions experienced among substituted alkyl chains. These tendencies have limited close polymer packing, which has been detrimental to charge transport in these moieties. To ameliorate charge transport in these classes of polymers, we make use of simple Stille coupling polymerization to synthesize highly random polythiophene polymers. We induced a positive microstructural change between polymer chains by attuning the ratio between alkyl-substituted and nonalkyl-substituted monomer units along the backbones. The optimized random polythiophene was found to have enhanced intermolecular interaction, increased size of crystallites, and stronger tendency to take edge orientation compared with both regiorandom and regioregular poly(3-hexylthiophene) polymers. Incorporation of the optimized random polythiophene as an active material in solid-state electrolyte-gated organic field-effect transistors exhibited better performance than the control device using regioregular poly(3-hexylthiophene), with a high hole mobility up to 4.52 cm² V^-1 s^-1 in ambient conditions.

"Double-Acceptor-Type" Random Conjugated Terpolymer Donors for Additive-Free Non-Fullerene Organic Solar Cells

Random conjugated terpolymers (RCTs) not only promote great comprehension and realization for the state-of-the-art highly effective non-fullerene organic solar cells (OSCs) but also offer a simple and practical synthetic strategy. However, the photovoltaic properties of RCTs yet lagged behind that of the donor-acceptor (D-A) alternating copolymer, especially in additive-free devices. Hence, we developed two feasible "double-acceptor-type" random conjugated terpolymers, PBDB-TAZ20 and PBDB-TAZ40. The additive-free OSCs based on PBDB-TAZ20:ITIC and PBDB-TAZ40:ITIC exhibit decent efficiencies of 12.34 and 11.27%, respectively, which both surpass the PBDB-T:ITIC-based device. For RCTs, the reasonably weakened crystallinity and the reduced phase separation degree are demonstrated to help in improving charge transport, reducing bimolecular recombination, and thus enhancing the photovoltaic performance of additive-free OSCs. The results imply that adding a third moiety into the D-A polymer donors provides a simple but efficient synthetic approach for high-performance OSCs.

Oxidation promoted self-assembly of π-conjugated polymers

Self-assembly is an attractive strategy for organizing molecules into ordered structures that can span multiple length scales. Crystallization Driven Self-Assembly (CDSA) involves a block copolymer with a crystallizable core-forming block and an amorphous corona-forming block that aggregate into micelles with a crystalline core in solvents that are selective for the corona block. CDSA requires core- and corona-forming blocks with very different solubilities. This hinders its use for the self-assembly of purely π-conjugated block copolymers since blocks with desirable optoelectronic properties tend to have similar solubilities. Further, this approach is not readily reversible, precluding stimulus-responsive assembly and disassembly. Here, we demonstrate that selective oxidative doping of one block of a fully π-conjugated block copolymer promotes the self-assembly of redox-responsive micelles. Heteroatom substitution in polychalcogenophenes enables the modulation of the intrinsic polymer oxidation potential. We show that oxidized micelles with a narrow size distribution form spontaneously and disassemble in response to a chemical reductant. This method expands the scope of π-conjugated polymers that can undergo controlled self-assembly and introduces reversible, redox-responsive self-assembly of π-conjugated polymers.

Influence of the –CN substitution position on the performance of dicyanodistyrylbenzene-based polymer solar cells

We developed four novel copolymers based on DCB units with differently positioned –CN groups and investigated their effects on the film morphology and performance of non-fullerene polymer solar cells.

Influence of Backbone Regioregularity on High-Mobility Conjugated Polymers Based on Alkylated Dithienylacrylonitrile

We designed and synthesized two donor-acceptor type conjugated polymers, the regioirregular polymer RI-PDPP-CNTVT-6 and its regioregular counterpart RR-PDPP-CNTVT-6, based on diketopyrrolopyrrole (DPP) and alkylated dithienylacrylonitrile (CNTVT) units. Among them, the 2-decyltetradecyl side chain on the DPP acceptor unit and the hexyl side chain on the CNTVT donor unit were used to ensure enough solubility for them. The backbone regioregularity was used to tune electronic structures and carrier transport of the conjugated system. The two conjugated polymers were characterized for their thermal, photophysical, electrochemical, and solution-processable properties, thin-film microstructures, and morphologies. The top-gate bottom-contact configuration organic field-effect transistor (OFET) devices based on these two conjugated polymers showed excellent ambipolar performances. Remarkably, the regioirregular polymer RI-PDPP-CNTVT-6 exhibited higher charge-carrier mobilities than the regioregular counterpart polymer RR-PDPP-CNTVT-6 did, as their highest hole/electron mobilities (μ_hmax/μ_emax) were 1.48/1.27 and 0.48/0.052 cm² V^-1 s^-1, respectively. Moreover, the influence of backbone regioregularity on its thermal stability, electrochemical and photophysical properties, solution processability, and charge-carrier mobility was intensively studied. Our results afforded a promising pathway toward the development of excellent ambipolar OFETs with high performance, good solution processability, and thermal stability.

Intrinsically distinct hole and electron transport in conjugated polymers controlled by intra and intermolecular interactions

It is still a matter of controversy whether the relative difference in hole and electron transport in solution-processed organic semiconductors is either due to intrinsic properties linked to chemical and solid-state structure or to extrinsic factors, as device architecture. We here isolate the intrinsic factors affecting either electron or hole transport within the same film microstructure of a model copolymer semiconductor. Relatively, holes predominantly bleach inter-chain interactions with H-type electronic coupling character, while electrons' relaxation more strongly involves intra-chain interactions with J-type character. Holes and electrons mobility correlates with the presence of a charge transfer state, while their ratio is a function of the relative content of intra- and inter-molecular interactions. Such fundamental observation, revealing the specific role of the ground-state intra- and inter-molecular coupling in selectively assisting charge transport, allows predicting a more favorable hole or electron transport already from screening the polymer film ground state optical properties.

Single-digit-micrometer thickness wood speaker

Thin films of several microns in thickness are ubiquitously used in packaging, electronics, and acoustic sensors. Here we demonstrate that natural wood can be directly converted into an ultrathin film with a record-small thickness of less than 10 μm through partial delignification followed by densification. Benefiting from this aligned and laminated structure, the ultrathin wood film exhibits excellent mechanical properties with a high tensile strength of 342 MPa and a Young’s modulus of 43.6 GPa, respectively. The material’s ultrathin thickness and exceptional mechanical strength enable excellent acoustic properties with a 1.83-times higher resonance frequency and a 1.25-times greater displacement amplitude than a commercial polypropylene diaphragm found in an audio speaker. As a proof-of-concept, we directly use the ultrathin wood film as a diaphragm in a real speaker that can output music. The ultrathin wood film with excellent mechanical property and acoustic performance is a promising candidate for next-generation acoustic speakers.

Thin films of several microns in thickness are ubiquitously used in packaging, electronics, and acoustic sensors. Here the authors demonstrate an ultrathin wood film with an aligned and laminal structure and acoustic properties which allows application of the film as diaphragm for an audio speaker.

Regioregularity and Electron Deficiency Control of Unsymmetric Diketopyrrolopyrrole Copolymers for Organic Photovoltaics

Manipulating the electron deficiency and controlling the regioregularity of π-conjugated polymers are important for the fine-tuning of their electronic and electrochemical properties to make them suitable for an organic solar cell. Here, we report such a molecular design of unsymmetric diketopyrrolopyrrole (DPP) based copolymers with different aromatic side units of either thiophene (Th), pyridine (Py), or fluorobenzene (FBz). The unsymmetric electron acceptors of Th-DPP-Py and Th-DPP-FBz were polymerized with the electron donor of two-dimensional benzobisthiophene (BDT-Th), affording two regiorandom DPP copolymers. They exhibited contrasting molecular orbital levels and bulk heterojunction morphology in methanofullerene-blended films, leading to power conversion efficiencies of 3.75 and 0.18%, respectively. We further synthesized a regioregular DPP copolymer via sandwiching the centrosymmetric BDT-Th unit by two Th-DPP-Py units in an axisymmetric manner. The extensive characterization through morphology observation, X-ray diffraction, and space-charge-limited current mobilities highlight the case-dependent positive/negative effects of regioregularity and electron deficiency control.

Regioregularity and deposition effect on the physical/chemical properties of polythiophene derivatives films

Polythiophene thin films are widely studied for applications in organic electronics. However, some comparisons are still missing, regarding distinct deposition techniques and regioregularity. Here regioregular and regiorandom alkyl-substituted polythiophene derivatives (P3ATs) were deposited on solid substrates using both Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) techniques. The main goal was to verify the possible influence of the regioregularity as well the deposition technique on their optical, electrical and electrochemical properties. LB and LS films of regioregular and regiorandom poly(3-butylthiophene) (P3BT) and poly(3-octylthiophene) (P3OT) were deposited onto glass/Indium-Tin-Oxide) substrates and characterized by UV-visible optical spectroscopy, atomic force microscopy, cyclic voltammetry, and conductivity measurements. The results demonstrated the influence of the deposition technique on the electrical outcome, moreover, the regioregularity affected all the performed characterizations. In addition, this paper may be useful to understand how the amphiphilic molecule addition affected the film properties of regioregular and regiorandom P3ATs, particularly the energy diagram provided by the electrochemical and absorption features.

Solution-Processed Semitransparent Organic Photovoltaics: From Molecular Design to Device Performance

Recent research efforts on solution-processed semitransparent organic solar cells (OSCs) are presented. Essential properties of organic donor:acceptor bulk heterojunction blends and electrode materials, required for the combination of simultaneous high power conversion efficiency (PCE) and average visible transmittance of photovoltaic devices, are presented from the materials science and device engineering points of view. Aspects of optical perception, charge generation-recombination, and extraction processes relevant for semitransparent OSCs are also discussed in detail. Furthermore, the theoretical limits of PCE for fully transparent OSCs, compared to the performance of the best reported semitransparent OSCs, and options for further optimization are discussed.

Pristine Poly( para-phenylene): Relating Semiconducting Behavior to Kinetics of Precursor Conversion

We investigated unsubstituted poly( para-phenylene) (PPP), a long-desired prototype of a conjugated polymer semiconductor. PPP was accessed via thermal aromatization of a precursor polymer bearing kinked, solubility-inducing dimethoxycyclohexadienylene moieties. IR spectroscopy and Vis ellipsometry studies revealed that the rate of conversion of the precursor to PPP increases with temperature and decreases with film density, indicating a process with high activation volume. The obtained PPP films were analyzed in thin-film transistors to gain insights into the interplay between the degree of conversion and the resulting p-type semiconducting properties. The semiconducting behavior of PPP was further unambiguously proven through IR and transistor measurements of molybdenum trioxide p-doped films.

On the homocoupling of trialkylstannyl monomers in the synthesis of diketopyrrolopyrrole polymers and its effect on the performance of polymer-fullerene photovoltaic cells

Homocoupling of monomers in a palladium-catalyzed copolymerization of donor-acceptor polymers affects the perfect alternating structure and may deteriorate the performance of such materials in solar cells. Here we investigate the effect of homocoupling bis(trialkylstannyl)-thiophene and -bithiophene monomers in two low band gap poly(diketopyrrolopyrrole-alt-oligothiophene) polymers by deliberately introducing extended oligothiophene defects in a controlled fashion. We find that extension of the oligothiophene by one or two thiophenes and creating defects up to at least 10% does not significantly affect the opto-electronic properties of the polymers or their photovoltaic performance as electron donor in solar cells in combination with [6,6]-phenyl C71 butytic acid methyl ester as acceptor. By using model reactions, we further demonstrate that for the optimized synthetic protocol and palladium-catalyst system the naturally occurring defect concentration in the polymers is expected to be less than 0.5%.