Large electric-field-induced strain in ferroelectric crystals by point-defect-mediated reversible domain switching

High Temperature-Insensitive Electrostrain Obtained in (K, Na)NbO3-Based Lead-Free Piezoceramics

Over the last decades, notable progress is achieved in (K, Na)NbO3 (KNN)-based lead-free piezoceramics. However, more studies are conducted to increase its piezoelectric charge coefficient (d33). For actuator applications, piezoceramics need high electric-field induced strain under low electric fields while maintaining exceptional temperature stability across a wide temperature range. In this study, this work developes Li/Sb-codoped KNN (LKNNS) ceramics with high electrostrain by defect engineering and domain engineering. A remarkable strain of 0.43%, along with a giant d33* value of 2177 pm V-1, is attained in the LKNNS ceramic at 20 kV cm-1. The ceramic exhibits a minimal performance decrease of less than 15% over a temperature range from room temperature to 150 °C. The exceptional strain is attributed to the presence of A-site vacancy-oxygen vacancy (V A ' - V O • • ${\mathrm{V}}_{\mathrm{A}}^{{\prime}}{\mathrm{ - V}}_{\mathrm{O}}^{{\mathrm{ \bullet \bullet }}}$ ) defect dipoles and the increase in nano-domains. The hierarchical domain configuration andV A ' - V O • • ${\mathrm{V}}_{\mathrm{A}}^{{\prime}}{\mathrm{ - V}}_{\mathrm{O}}^{{\mathrm{ \bullet \bullet }}}$ defect dipoles impede the switched domains from reverting to their original state as temperature increases, furthermore, the elongated dipole moments ofV A ' - V O • • ${\mathrm{V}}_{\mathrm{A}}^{{\prime}}{\mathrm{ - V}}_{\mathrm{O}}^{{\mathrm{ \bullet \bullet }}}$ caused by rising temperatures compensate for strain reduction results in exceptional temperature stability. This study provides a model for designing piezoelectric materials with exceptional overall performance under low electric fields and across a wide temperature range.

Deciphering the Effect of Defect Dipoles on the Polarization and Electrostrain Behavior in Perovskite Ferroelectrics

Defect dipoles are crucial for regulating electromechanical properties in piezoelectric ceramics, but their effects on polarization and electrostrain behaviors are still unclear. Here, a reasonable theoretical model is proposed and evidenced by experiments to address a long-standing puzzle of the relationship between the internal bias field and defect dipoles. By incorporating the additional polarization induced by defect dipoles, we refine the classical theory to account for the recently reported asymmetric giant-strain behaviors. Phase-field simulation reveals the electrostrain evolution in response to defect dipole elastic distortion and additional polarization. This work not only elucidates the effect of defect dipoles on polarization and electrostrain but also advances the theoretical understanding of defects in piezoelectrics.

Porous Structure Enhances the Longitudinal Piezoelectric Coefficient and Electromechanical Coupling Coefficient of Lead-Free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3

The introduction of porosity into ferroelectric ceramics can decrease the effective permittivity, thereby enhancing the open circuit voltage and electrical energy generated by the direct piezoelectric effect. However, the decrease in the longitudinal piezoelectric coefficient (d33) with increasing porosity levels currently limiting the range of pore fractions that can be employed. By introducing aligned lamellar pores into (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3, this paper demonstrates an unusual 22-41% enhancement in the d33 compared to its dense counterpart. This unique combination of high d33 and a low permittivity leads to a significantly improved voltage coefficient (g33), energy harvesting figure of merit (FoM33) and electromechanical coupling coefficient (k 33 2 $k_{33}^2$ ). The underlying mechanism for the improved properties is demonstrated to be a synergy between the low defect concentration and high internal polarizing field within the porous lamellar structure. This work provides insights into the design of porous ferroelectrics for applications related to sensors, energy harvesters, and actuators.

Enhancement of the Piezocatalytic Response of La-Doped BiFeO3 Nanoparticles by Defects Synergy

Because of their intrinsic polarization and related properties, ferroelectrics attract significant attention to address energy transformation and environmental protection. Here, by using trivalent-ion-lanthanum doping of BiFeO3 nanoparticles (NPs), it is shown that defects and piezoelectric potential are synergized to achieve a high piezocatalytic effect for decomposing the model Rhodamine B (RhB) pollutant, reaching a record-high piezocatalytic rate of 21 360 L mol-1 min-1 (i.e., 100% RhB degradation within 20 min) that exceeds most state-of-the art ferroelectrics. The piezocatalytic Bi0.99La0.01FeO3 NPs are also demonstrated to be versatile toward various pharmaceutical pollutants with over 90% removal efficiency, making them extremely efficient piezocatalysts for water purification. It is also shown that 1% La-doping introduces oxygen vacancies and Fe2+ defects. It is thus suggested that oxygen vacancies act as both active sites and charge providers, permitting more surface adsorption sites for the piezocatalysis process, and additional charges and better energy transfer between the NPs and surrounding molecules. Furthermore, the oxygen vacancies are proposed to couple to Fe2+ to form defect dipoles, which in turn introduces an internal field, resulting in more efficient charge de-trapping and separation when added to the piezopotential. This synergistic mechanism is believed to provide a new perspective for designing future piezocatalysts with high performance.

Antiferroelectric Heterostructures Memristors with Unique Resistive Switching Mechanisms and Properties

A novel antiferroelectric material, PbSnO3 (PSO), was introduced into a resistive random access memory (RRAM) to reveal its resistive switching (RS) properties. It exhibits outstanding electrical performance with a large memory window (>104), narrow switching voltage distribution (±2 V), and low power consumption. Using high-resolution transmission electron microscopy, we observed the antiferroelectric properties and remanent polarization of the PSO thin films. The in-plane shear strains in the monoclinic PSO layer are attributed to oxygen octahedral tilts, resulting in misfit dislocations and grain boundaries at the PSO/SRO interface. Furthermore, the incoherent grain boundaries between the orthorhombic and monoclinic phases are assumed to be the primary paths of Ag+ filaments. Therefore, the RS behavior is primarily dominated by antiferroelectric polarization and defect mechanisms for the PSO structures. The RS behavior of antiferroelectric heterostructures controlled by switching spontaneous polarization and strain, defects, and surface chemistry reactions can facilitate the development of new antiferroelectric device systems.

Ultrahigh electromechanical response from competing ferroic orders

Materials with electromechanical coupling are essential for transducers and acoustic devices as reversible converters between mechanical and electrical energy1-6. High electromechanical responses are typically found in materials with strong structural instabilities, conventionally achieved by two strategies-morphotropic phase boundaries7 and nanoscale structural heterogeneity8. Here we demonstrate a different strategy to accomplish ultrahigh electromechanical response by inducing extreme structural instability from competing antiferroelectric and ferroelectric orders. Guided by the phase diagram and theoretical calculations, we designed the coexistence of antiferroelectric orthorhombic and ferroelectric rhombohedral phases in sodium niobate thin films. These films show effective piezoelectric coefficients above 5,000 pm V-1 because of electric-field-induced antiferroelectric-ferroelectric phase transitions. Our results provide a general approach to design and exploit antiferroelectric materials for electromechanical devices.

Ultrahigh Electrobending Deformation in Lead-Free Piezoelectric Ceramics via Defect Concentration Gradient Design

Recent breakthroughs in defect-engineered lead-free piezoelectric ceramics have reported remarkable electrostrain values, surpassing the limit of lattice distortion. This has aroused wide concern on bending deformation and the associated underlying mechanism. Herein, via designing lead-free piezoelectric ceramics with varying volatilization characteristics, it is uncovered that the ultrahigh electrobending deformation is primarily attributed to a large strain gradient induced by unevenly distributed defect dipoles. In 0.5 mm thick Sr/Sn co-doped potassium sodium niobate ceramics featuring volatile K/Na elements, the inherent bipolar electrostrain value can reach 0.3% at 20 kV cm-1 due to the existence of defect dipoles, while the gradient distribution of defect dipole generates significant bending displacement, amplifying apparent electrostrain value to 1.1%. Notably, nonvolatile Ba0.99TiO2.99 ceramic with homogeneous defect dipole distribution does not present electrobending. Of particular interest is that the electrobending phenomenon can be observed through introducing a defect dipole gradient into barium titanate ceramic. A monolayer ceramic with defect dipole gradient can generate large tip displacement (±1.5 mm) in cantilever structure, demonstrating its promising potential in precise positioning. This study delves into the underlying mechanism driving electrobending deformation and its impact on the apparent electrostrain measurement in defect-engineered piezoelectric ceramics, providing fresh perspectives for the development of piezoelectric bending actuators.

Dislocation Density-Mediated Functionality in Single-Crystal BaTiO3

Unlike metals where dislocations carry strain singularity but no charge, dislocations in oxide ceramics are characterized by both a strain field and a local charge with a compensating charge envelope. Oxide ceramics with their deliberate engineering and manipulation are pivotal in numerous modern technologies such as semiconductors, superconductors, solar cells, and ferroics. Dislocations facilitate plastic deformation in metals and lead to a monotonous increase in the strength of metallic materials in accordance with the widely recognized Taylor hardening law. However, achieving the objective of tailoring the functionality of oxide ceramics by dislocation density still remains elusive. Here a strategy to imprint dislocations with {100}<100> slip systems and a tenfold change in dislocation density of BaTiO3 single crystals using high-temperature uniaxial compression are reported. Through a dislocation density-based approach, dielectric permittivity, converse piezoelectric coefficient, and alternating current conductivity are tailored, exhibiting a peak at medium dislocation density. Combined with phase-field simulations and domain wall potential energy analyses, the dislocation-density-based design in bulk ferroelectrics is mechanistically rationalized. These findings may provide a new dimension for employing plastic strain engineering to tune the electrical properties of ferroics, potentially paving the way for advancing dislocation technology in functional ceramics.

Organic Passivation-Enhanced Ferroelectricity in Perovskite Oxide Films

Perovskite oxides and organic-inorganic halide perovskite materials, with numerous fascinating features, have been subjected to extensive studies. Most of the properties of perovskite materials are dependence on their ferroelectricity that denoted by remanent polarization (Pr). Thus, the increase of Pr in perovskite films is mainly an effort in material physics. At present, commonplace improvement schemes, i.e., controlling material crystallinity, and post-annealing by using a high-temperature process, are normally used. However, a simpler and temporal strategy for Pr improvement is always unavailable to perovskite material researchers. In this study, an organic coating layer, low-temperature, and vacuum-free strategy is proposed to improve the Pr, directly increasing the Pr from 36 to 56 µC cm-2. Further study finds that the increased Pr originates from the suppression of the oxygen defects and Ti defects. This organic coating layer strategy for passivating the defects may open a new way for the preparation of higher-performance and cost-effective perovskite products, further improving its prospective for application in the electron devices field.

Piezoelectric Biomaterials Inspired by Nature for Applications in Biomedicine and Nanotechnology

Bioelectricity provides electrostimulation to regulate cell/tissue behaviors and functions. In the human body, bioelectricity can be generated in electromechanically responsive tissues and organs, as well as biomolecular building blocks that exhibit piezoelectricity, with a phenomenon known as the piezoelectric effect. Inspired by natural bio-piezoelectric phenomenon, efforts have been devoted to exploiting high-performance synthetic piezoelectric biomaterials, including molecular materials, polymeric materials, ceramic materials, and composite materials. Notably, piezoelectric biomaterials polarize under mechanical strain and generate electrical potentials, which can be used to fabricate electronic devices. Herein, a review article is proposed to summarize the design and research progress of piezoelectric biomaterials and devices toward bionanotechnology. First, the functions of bioelectricity in regulating human electrophysiological activity from cellular to tissue level are introduced. Next, recent advances as well as structure-property relationship of various natural and synthetic piezoelectric biomaterials are provided in detail. In the following part, the applications of piezoelectric biomaterials in tissue engineering, drug delivery, biosensing, energy harvesting, and catalysis are systematically classified and discussed. Finally, the challenges and future prospects of piezoelectric biomaterials are presented. It is believed that this review will provide inspiration for the design and development of innovative piezoelectric biomaterials in the fields of biomedicine and nanotechnology.

Defect dipole stretching enables ultrahigh electrostrain

Piezoelectric actuators have been extensively utilized as micro-displacement devices because of their advantages of large output displacement, high sensitivity, and immunity to electromagnetic interference. Here, we propose a straightforward approach to design <110>-oriented defect dipoles by introducing A-site vacancies and oxygen vacancies in (K0.48Na0.52)0.99NbO2.995 ceramics. As a result, we achieve ultrahigh electrostrains of 0.7% at 20 kV cm-1 (with an effective piezoelectric strain coefficient d33* = 3500 pm V-1), outperforming the performance of existing piezoelectric ceramics at the same driving field. The exceptional electrostrain is primarily attributed to the large stretching of defect dipoles when subjected to an applied electric field, a phenomenon that has been experimentally confirmed. Moreover, the strong interaction between these defect dipoles and <110> spontaneous polarizations plays a critical role in minimizing hysteresis and ensuring excellent fatigue resistance. Our findings present a practical and effective strategy for developing high-performance piezoelectric materials tailored for advanced actuator applications.

Insights into Antisite Defect Complex Induced High Ferro-Piezoelectric Properties in KNbO3 Perovskite: First-Principles Study

Improving ferro-piezoelectric properties of niobate-based perovskites is highly desirable for developing eco-friendly high-performance sensors and actuators. Although electro-strain coupling is usually obtained by constructing multiphase boundaries via complex chemical compositions, defect engineering can also create opportunities for novel property and functionality advancements. In this work, a representative tetragonal niobate-based perovskite, i.e., KNbO3, is studied by using first-principles calculations. Two intrinsic types of Nb antisite defect complexes are selected to mimic alkali-deficiency induced excess Nb antisites in experiments. The formation energy, electronic profiles, polarization, and piezoelectric constants are systematically analyzed. It is shown that the structural distortion and chemical heterogeneity around the energetically favorable antisite pair defects, i.e., (NbK4·+KNb4'), lower the crystal symmetry of KNbO3 from tetragonal to triclinic phase, and facilitate polarization emergence and reorientation to substantially enhance intrinsic ferro-piezoelectricity (i.e., spontaneous polarization Ps of 68.2 μC/cm2 and piezoelectric strain constant d33 of 228.3 pC/N) without complicated doping and alloying.

The Influence of Measurement Conditions on the Electrocaloric Effect in Ferroelectric Ceramics of Modified Barium Titanate

In this work, the electrocaloric effect (ECE) and electrocaloric strength (ΔT/E) were measured and thermal and dielectric studies were performed on Pb-modified BaTiO3 (BPT). The saturated hysteresis loops and normal ferroelectric behavior of the ferroelectric ceramics allow the utilization of the indirect method to estimate the electrocaloric properties. The electrocaloric measurements were performed under high (18 kV/cm) versus low (8 kV/cm) electric field conditions. These conditions were chosen to notice and then eliminate an artificial negative electrocaloric effect in the tested ceramics. At the same time, relatively high values of positive electrocaloric temperature change ΔT (~ 2.19 K) and electrocaloric strength ΔT/E (~0.27-0.11 K·cm/kV) were obtained.

Ultrahigh Energy Storage Performance of BiFeO3-BaTiO3 Flexible Film Capacitor with High-Temperature Stability via Defect Design

Nanoengineering polar oxide films have attracted great attention in energy storage due to their high energy density. However, most of them are deposited on thick and rigid substrates, which is not conducive to the integration of capacitors and applications in flexible electronics. Here, an alternative strategy using van der Waals epitaxial oxide dielectrics on ultra-thin flexible mica substrates is developed and increased the disorder within the system through high laser flux. The introduction of defects can efficiently weaken or destroy the long-range ferroelectric ordering, ultimately leading to the emergence of a large numbers of weak-coupling regions. Such polarization configuration ensures fast polarization response and significantly improves energy storage characteristics. A flexible BiFeO3-BaTiO3 (BF-BT) capacitor exhibits a total energy density of 43.5 J cm-3 and an efficiency of 66.7% and maintains good energy storage performance over a wide temperature range (20-200 °C) and under large bending deformation (bending radii ≈ 2 mm). This study provides a feasible approach to improve the energy storage characteristics of dielectric oxide films and paves the way for their practical application in high-energy density capacitors.

A Highly Deficient Medium-Entropy Perovskite Ceramic for Electromagnetic Interference Shielding under Harsh Environment

Materials that can provide reliable electromagnetic interference (EMI) shielding in highly oxidative atmosphere at elevated temperature are indispensable in the fast-developing aerospace field. However, most of conductor-type EMI shielding materials such as metals can hardly withstand the high-temperature oxidation, while the conventional dielectric-type materials cannot offer sufficient shielding efficiency in gigahertz (GHz) frequencies. Here, a highly deficient medium-entropy (ME) perovskite ceramic as an efficient EMI shielding material in harsh environment, is demonstrated. The synergistic effect of entropy stabilization and aliovalent substitution on A-site generate abnormally high concentration of Ti and O vacancies that are stable under high-temperature oxidation. Due to the clustering of vacancies, the highly deficient perovskite ceramic exhibits giant complex permittivity and polarization loss in GHz, leading to the specific EMI shielding effectiveness above 30 dB/mm in X-band even after 100 h of annealing at 1000 °C in air. Along with the low thermal conductivity, the aliovalent ME perovskite can serve as a bifunctional shielding material for applications in aircraft engines and reusable rockets.

Reversible Mechanical Switching of Ferroelastic Stripe Domains in Multiferroic Thin Films

The application potential of ferroelectric thin films largely relies on the controllability of their domain structure. Among the various proposed strategies, mechanical switching is being considered as a potential alternative to replace electrical switching for control of the domain structure of ferroelectric thin films via, e.g., the flexoelectric effect. So far, studies on mechanical switching are confined to out-of-plane polarization switching in ferroelectric thin films, which are in pristine or prepoled single-domain states. In this work, we report reversible in-plane mechanical switching of the monoclinic phase (MC phase) stripe domains in BiFeO3 thin films can be realized by scanning tip force. Via controlling the fast scan direction of the scanning probe microscopy tip and the magnitude of the tip force, the effective trailing field induced by the local tip force can be rotated to consequently switch the net in-plane polarization of the two-variant stripe domain patterns by either 90° or 180°. Moreover, the monoclinic to rhombohedral (MC-R) phase transition occurs during mechanical switching with the distribution of R-phase domains dependent on the switching paths. These results extend our current understanding of the mechanical switching behavior in ferroelectric thin films and should be instructive for their future applications.

Contribution of irreversible non-180° domain to performance for multiphase coexisted potassium sodium niobate ceramics

Despite the dominance of lead-based piezoelectric materials with ultrahigh electric-field-induced strain in actuating applications, seeking eco-friendly substitutes with an equivalent performance remains an urgent demand. Here, a strategy of regulating the irreversible non-180° domain via phase engineering is introduced to optimize the available strain (the difference between the maximum strain and the remnant strain in a unipolar strain curve) in the lead-free potassium-sodium niobate-based piezoelectric ceramics. In situ synchrotron X-ray diffraction and Rayleigh analysis reveal the contribution of the non-180° domain to available strain in the tetragonal-orthorhombic-rhombohedral phase boundary. The reducing orthorhombic phase and increasing rhombohedral/tetragonal phase accompanied by the reduced irreversible non-180° domain are obtained with increasing doping of Sb5+, resulting in an enlarged available strain due to the significantly lowered remnant strain. This optimization is mainly attributed to the reduced irreversible non-180° domain wall motion and the increased lattice distortion, which are beneficial to decrease extrinsic contribution and enhance intrinsic contribution. The mesoscopic structure of miniaturized nanosized domain with facilitated domain switching also contributes to the enhancement of available strain due to the improved random field and decreased energy barrier. The study will shed light on the design of lead-free high-performance piezoelectric ceramics for actuator applications.

Ultra-large electromechanical deformation in lead-free piezoceramics at reduced thickness

Lead-free piezoceramics with large controllable deformations are highly desirable for numerous energy converter applications ranging from consumer electronics to medical microrobots. Although several new classes of high-performance ferroelectrics have been discovered, a universal strategy to enable various piezoceramics to realize large electromechanical deformations is still lacking. Herein, by gradually reducing the thickness from 0.5 mm to 0.1 mm, we discover that a large nominal electrostrain of ∼11.49% can be achieved in thin 0.937(Bi0.5Na0.5)TiO3-0.063BaTiO3 (BNT-BT) ceramics with highly asymmetric strain-electric field curves. Further analyses of the polarization switching process reveal that the boosted strain curves originate from the bending deformation driven by asymmetric ferroelastic switching in the surface layers. Based on this, one monolayer BNT-BT was designed to realize digital displacement actuation and a scanning mirror application with a maximum mirror deflection angle of 44.38°. Moreover, the surface effect-induced bending deformation can be extended to other piezoceramics, accompanied by derived shape retention effects. These discoveries raise the possibility of utilizing thickness engineering to design large-displacement actuators and may accelerate the development of high-performance lead-free piezoceramics.

Enhanced Piezoelectric Response at Nanoscale Vortex Structures in Ferroelectrics

The piezoelectric response is a measure of the sensitivity of a material's polarization to stress or its strain to an applied field. Using in operando X-ray Bragg coherent diffraction imaging, we observe that topological vortices are the source of a 5-fold enhancement of the piezoelectric response near the vortex core. The vortices form where several low-symmetry ferroelectric phases and phase boundaries coalesce. Unlike bulk ferroelectric solid solutions in which a large piezoelectric response is associated with coexisting phases in the proximity of the triple point, the largest responses for pure BaTiO3 at the nanoscale are in spatial regions of extremely small spontaneous polarization at vortex cores. The response decays inversely with polarization away from the vortex, analogous to the behavior in bulk ceramics as the cation compositions are varied away from the triple point. We use first-principles-based molecular dynamics to augment our observations, and our results suggest that nanoscale piezoelectric materials with a large piezoelectric response can be designed within a parameter space governed by vortex cores. Our findings have implications for the development of next-generation nanoscale piezoelectric materials.

Extended planar defects of oxygen vacancies in ferroelectric [Formula: see text] and impact on ferroelectricity

Extended defects of vacancies in ferroelectrics (FE), where vacancies spread over an extended space, are of critical importance in terms of understanding the long-standing problems such as polarization fatigue and aging. However, extended defects in FEs are poorly understood. Here we investigate the extended planar oxygen vacancies in ferroelectric [Formula: see text] using density functional theory and the modern theory of polarization. Oxygen vacancies of different charge states, namely [Formula: see text], [Formula: see text], and [Formula: see text], are studied. We obtain interesting results such as: (i) The formation energy of planar [Formula: see text] vacancies can be very small (merely 0.54 eV) even under the oxygen-rich condition, which is considerably smaller than the formation energy (4.0 eV) of planar [Formula: see text] vacancies; (ii) Planar [Formula: see text] vacancies drastically reduce the ferroelectric polarization in [Formula: see text] by more than one order of magnitude, which provides a pivotal (theoretical) evidence that the planar oxygen vacancies could be the origin of polarization fatigue and imprinting. The polarization dead layer caused by planar oxygen vacancies is shown to be around 72 Å. Microscopic origin and insight, based on the local Ti-O relative displacements, are provided to understand these interesting phenomena.

Electromechanical Performance Optimization of Ni-Doped Bi(Sc, Zr)O3-PbTiO3 Ceramics and Microstructure Analysis

BiScO3-PbTiO3-based ceramics show great potential in high-temperature piezoelectric applications. However, their high dielectric loss tan δ and low mechanical quality factor Qm have to be optimized. In this paper, a ceramic system of (1-y)Bi(Sc0.975Zr0.025)O3-yPb(Ti1-xNix)O3 (BSZ-yPT-xNi, x = 0, 0.015, 0.025, and 0.035 and y = 0.62, 0.63, 0.64, and 0.65) was systematically investigated. Increase in x or y values leads to the enhancement of the tetragonal phase and tetragonal lattice distortion. The rhombohedral/tetragonal morphotropic phase boundary (MPB) locates in the vicinity of y = 0.64 for the x = 0 and 0.015 samples, and y = 0.63 for the x = 0.025 and 0.035 samples. For these MPB samples, the substitution of Ni2+ for Ti4+ causes domain refinement, evolving from the submicrometer lamellar domains to hierarchical domains, and finally to the high-density stripe-like nanodomains, which benefits the domain wall motion and makes the coercive field reduced. However, the alignment of defect dipoles (NiTi''-VO••) after the sufficient poling and aging treatment induces the noticeable internal bias field, which increases with the addition of Ni2+. Apparent piezoelectric "hardening" occurred, evidenced by the increase in Qm and the reduction in tan δ. Among the MPB samples, the x = 0.025/y = 0.63 ceramic shows the superior comprehensive electromechanical performance with the d33 of 380 pC/N, kt of 0.51, Qm of 112, and tan δ of 0.010. Besides, excellent temperature stability was achieved with the d33 of 367-380 pC/N, Qm of 106-112, and tan δ ≤ 0.010 in the temperature range of 25-250 °C.

Ultrahigh Electrostrictive Effect in Lead-Free Ferroelectric Ceramics Via Texture Engineering

The electrostrictive effect, which induces strain in ferroelectric ceramics, offers distinct advantages over its piezoelectric counterpart for high-precision actuator applications, including anhysteretic behavior even at high frequencies, rapid reaction times, and no requirement for poling. Historically, commercially available electrostrictive materials have been lead oxide-based. However, global restrictions on the use of lead in electronic components necessitate the exploration of lead-free electrostrictive ceramics with a high strain performance. Although various engineering strategies for producing materials with high strain have been proposed, they typically come at the expense of increased strain hysteresis. Here, we describe the extraordinary electrostrictive response of (Ba0.95Ca0.05)(Ti0.88Sn0.12)O3 (BCTS) ceramics with ultrahigh electrostrictive strain and negligible hysteresis achieved through texture engineering leveraging the anisotropic intrinsic lattice contribution. The BCTS ceramics exhibit a high unipolar strain of 0.175%, a substantial electrostrictive coefficient Q33 of 0.0715 m4 C-2, and an ultralow hysteresis of less than 0.8%. Notably, the Q33 value is three times greater than that of high-performance lead-based Pb(Mg1/3Nb2/3)O3 electrostrictive ceramics. Multiscale structural analyses demonstrate that the electrostrictive effect dominates the BCTS strain response. This research introduces a novel approach to texture engineering to enhance the electrostrictive effect, offering a promising paradigm for future advancements in this field.

Tailoring the Properties of Bulk BaTiO3Based Perovskites by Heteroatom-Doping towards Multifunctional Applications: A Review

Dielectric barium titanate-based perovskite (BaTiO3) has emerged as one of the most popular multilayer ceramic materials for its versatile properties. However, the intrinsic properties, particularly the dielectric, ferroelectric, piezoelectric, and electrical properties of natural barium titanate perovskite (BTP) are not as attractive as required for its multifunctional applications. In recent years, the doping technique has been widely studied for improving the desirable properties of BTP ceramic to expand its practical applications in various advanced technologies. Considering the latest research and developments, this review aims to discuss the synthesis techniques of hetero-atom doped BTP, together with doping status, such as doping sites, doped content, and surface-to-volume ratio. We also critically analyze the effects of co-factors (e.g., sintering temperature, grain size, Curie temperature, and compositions of hetero-atoms) on the structural, and electronic properties of BTP. In addition, optimization of the doping requirements for obtaining the desired improvements of the target properties is also discussed, coupled with providing a comprehensive discussion on the synthesis pathways. Subsequently, diverse applications of the heteroatom-doped BTP are exemplified. Finally, major challenges and future outlooks are highlighted from the perspective of different applications of BTP.

Effect of sub-micron grains and defect-dipole interactions on dielectric properties of iron, cobalt, and copper doped barium titanate ceramics

Introduction: Dilutely doped ferroelectric materials are of interest, as engineering these materials by introducing point defects via doping often leads to unique behavior not otherwise achievable in the undoped material. For example, B-site doping with transition metals in barium titanate (BaTiO3, or BTO) creates defect dipoles via oxygen vacancies leading enhanced polarization, strain, and the ability to tune dielectric properties. Though defect dipoles should lead to dielectric property enhancements, the effect of grain size in polycrystalline ferroelectrics such as BTO plays a significant role in those properties as well. Methods: Herein, doped BTO with 1.0% copper (Cu), iron (Fe), or cobalt (Co) was synthesized using traditional solid-state processing to observe the contribution of both defect-dipole formation and grain size on the ferroelectric and dielectric properties. Results and discussion: 1.0% Cu doped BTO showed the highest polarization and strain (9.3 μC/cm2 and 0.1%, respectively) of the three doped BTO samples. While some results, such as the aforementioned electrical properties of the 1.0% Cu doped BTO can be explained by the strong chemical driving force of the Cu atoms to form defect dipoles with oxygen vacancies and copper's consistent +2 valency leading to stable defect-dipole formation (versus the readily mixed valency states of Fe and Co at +2/+3), other properties cannot. For instance, all three Tc values should fall below that of undoped BTO (typically 120°C-135°C), but the Tc of 1.0% Cu BTO actually exceeds that range (139.4°C). Data presented on the average grain size and distribution of grain sizes provides insight allowing us to decouple the effect of defect dipoles and the effect of grain size on properties such as Tc, where the 1.0% Cu BTO was shown to possess the largest overall grains, leading to its increase in Tc. Conclusion/future work: Overall, the 1% Cu BTO possessed the highest polarization, strain, and Tc and is a promising dopant for engineering the performance of the material. This work emphasizes the challenge of extricating one effect (such as defect-dipole formation) from another (grain size modification) inherent to doping polycrystalline BTO.

Pressure Control of Nonferroelastic Ferroelectric Domains in ErMnO3

Mechanical pressure controls the structural, electric, and magnetic order in solid-state systems, allowing tailoring of their physical properties. A well-established example is ferroelastic ferroelectrics, where the coupling between pressure and the primary symmetry-breaking order parameter enables hysteretic switching of the strain state and ferroelectric domain engineering. Here, we study the pressure-driven response in a nonferroelastic ferroelectric, ErMnO3, where the classical stress-strain coupling is absent and the domain formation is governed by creation-annihilation processes of topological defects. By annealing ErMnO3 polycrystals under variable pressures in the MPa regime, we transform nonferroelastic vortex-like domains into stripe-like domains. The width of the stripe-like domains is determined by the applied pressure as we confirm by three-dimensional phase field simulations, showing that pressure leads to oriented layer-like periodic domains. Our work demonstrates the possibility to utilize mechanical pressure for domain engineering in nonferroelastic ferroelectrics, providing a lever to control their dielectric and piezoelectric responses.

Facile Control of Ferroelectricity Driven by Ingenious Interaction Engineering

Construction of ferroelectric and optimization of macroscopic polarization has attracted tremendous attention for next generation light weight and flexible devices, which brings fundamental vitality for molecular ferroelectrics. However, effective molecular tailoring toward cations makes ferroelectric synthesis and modification relatively elaborate. Here, the study proposes a facile method to realize triggering and optimization of ferroelectricity. The experimental and theoretical investigation reveals that orientation and alignment of polar cations, dominated factors in molecular ferroelectrics, can be controlled by easily processed anionic modification. In one respect, ferroelectricity is induced by strengthened intermolecular interaction. Moreover, ≈50% of microscopic polarization enhancement (from 8.07 to 11.68 µC cm-2 ) and doubling of equivalent polarization direction (from 4 to 8) are realized in resultant ferroelectric FEtQ2ZnBrI3 (FEQZBI, FEtQ = N-fluoroethyl-quinuclidine). The work offers a totally novel platform for control of ferroelectricity in organic-inorganic hybrid ferroelectrics and a deep insight of structure-property correlations.

Intrinsic-Strain Engineering by Dislocation Imprint in Bulk Ferroelectrics

We report an intrinsic strain engineering, akin to thin filmlike approaches, via irreversible high-temperature plastic deformation of a tetragonal ferroelectric single-crystal BaTiO_{3}. Dislocations well-aligned along the [001] axis and associated strain fields in plane defined by the [110]/[1[over ¯]10] plane are introduced into the volume, thus nucleating only in-plane domain variants. By combining direct experimental observations and theoretical analyses, we reveal that domain instability and extrinsic degradation processes can both be mitigated during the aging and fatigue processes, and demonstrate that this requires careful strain tuning of the ratio of in-plane and out-of-plane domain variants. Our findings advance the understanding of structural defects that drive domain nucleation and instabilities in ferroic materials and are essential for mitigating device degradation.

Defect Dipole Behaviors on the Strain Performances of Bismuth Sodium Titanate-Based Lead-Free Piezoceramics

Bismuth sodium titanate (BNT)-based, lead-free piezoelectric materials have been extensively studied due to their excellent strain characteristics and environmental friendliness. In BNTs, the large strain (S) usually requires a relatively large electric field (E) excitation, resulting in a low inverse piezoelectric coefficient d₃₃* (S/E). Moreover, the hysteresis and fatigue of strain in these materials have also been bottlenecks impeding the applications. The current common regulation method is chemical modification, which mainly focuses on forming a solid solution near the morphotropic phase boundary (MPB) by adjusting the phase transition temperature of the materials, such as BNT-BaTiO₃, BNT-Bi_0.5K_0.5TiO₃, etc., to obtain a large strain. Additionally, the strain regulation based on the defects introduced by the acceptor, donor, or equivalent dopant or the nonstoichiometry has proven effective, but its underlying mechanism is still ambiguous. In this paper, we review the generation of strain and then discuss it from the domain, volume, and boundary effect perspectives to understand the defect dipole behavior. The asymmetric effect caused by the coupling between defect dipole polarization and ferroelectric spontaneous polarization is expounded. Moreover, the defect effect on the conductive and fatigue properties of BNT-based solid solutions is described, which will affect the strain characteristics. The optimization approach is appropriately evaluated while there are still challenges in the full understanding of the defect dipoles and their strain output, in which further efforts are needed to achieve new breakthroughs in atomic-level insight.

Enhancing Electromechanical Properties of PZT-Based Piezoelectric Ceramics by High-Temperature Poling for High-Power Applications

Defect engineering is a proven method to tune the properties of perovskite oxides. In demanding high-power piezoelectric ceramic applications, acceptor doping is the most effective method to harden ceramics, but it inevitably degrades the ceramics' electromechanical properties. Herein, a poling method based on acceptor doping, namely, high-temperature poling, is implemented by applying an electric field above the Curie temperature for poling to achieve a balance of the properties of piezoelectric coefficient d₃₃ and mechanical quality factor Q_m. After high-temperature poling, the piezoelectric property of 0.6 mol % Mn-doped Pb_0.92Sr_0.08(Zr_0.533Ti_0.443Nb_0.024)O₃ is d₃₃ = 483 pC/N and Q_m = 448. Compared with the traditional poling, the piezoelectric coefficient d₃₃ of the high-temperature poling ceramics increased by approximately 40%, and Q_m also increased by nearly 18%. Therefore, high d₃₃ and Q_m were exhibited by our PZT piezoelectric ceramics. Rayleigh's law analysis, XRD, and transmission electron microscopy analysis show that, after high-temperature poling, the considerably increased d₃₃ is related to the large increase in the reversible domain wall motion in the intrinsic effect, while the slightly increased Q_m is related to the inhibited irreversible domain wall motion in the extrinsic effect. This study reports a method for high-temperature poling and provides insights into the design of high-power piezoelectric ceramics with high d₃₃ and Q_m.

Shape-memory effect in twisted ferroic nanocomposites

The shape recovery ability of shape-memory alloys vanishes below a critical size (~50 nm), which prevents their practical applications at the nanoscale. In contrast, ferroic materials, even when scaled down to dimensions of a few nanometers, exhibit actuation strain through domain switching, though the generated strain is modest (~1%). Here, we develop freestanding twisted architectures of nanoscale ferroic oxides showing shape-memory effect with a giant recoverable strain (>8%). The twisted geometrical design amplifies the strain generated during ferroelectric domain switching, which cannot be achieved in bulk ceramics or substrate-bonded thin films. The twisted ferroic nanocomposites allow us to overcome the size limitations in traditional shape-memory alloys and open new avenues in engineering large-stroke shape-memory materials for small-scale actuating devices such as nanorobots and artificial muscle fibrils.

Sm-Doped PIN-PMN-PT Transparent Ceramics with High Curie Temperature, Good Piezoelectricity, and Excellent Electro-Optical Properties

Transparent piezoelectric materials are capable of coupling several physical effects such as optics, acoustics, electricity, and mechanical deformation together, which expands applications for mechanical-electro-optical multifunctional devices. However, piezoelectricity, transparency, and Curie temperature restrict each other, so it is difficult to achieve high piezoelectricity with both good transparency and a high Curie point. In this paper, Sm-doped 24Pb(In_1/2Nb_1/2)O₃-42Pb(Mg_1/3Nb_2/3)O₃-34PbTiO₃ (PIN-PMN-PT) transparent ceramic with a high piezoelectric coefficient of 905 pC/N, excellent electro-optical coefficient of 814 pm/V, and high Curie-point of 179 °C is fabricated. Sm doping effect on the phase structures, piezoelectricity, ferroelectricity, optical transparency, electro-optical properties, and thermal stability is systematically investigated. Compared with PMN-PT transparent ceramics, PIN-PMN-PT transparent ceramics exhibit better temperature stability. Electro-optical modulation and energy conversion are achieved using PIN-PMN-PT transparent piezoelectric ceramic, which indicates that it has great potential to develop mechanical-electrical-optical multifunctional coupling devices for optical communication, energy harvesting, photoacoustic imaging, and so on.

Achieving giant electrostrain of above 1% in (Bi,Na)TiO3-based lead-free piezoelectrics via introducing oxygen-defect composition

Piezoelectric ceramics have been extensively used in actuators, where the magnitude of electrostrain is key indicator for large-stroke actuation applications. Here, we propose an innovative strategy based on defect chemistry to form a defect-engineered morphotropic phase boundary and achieve a giant strain of 1.12% in lead-free Bi_0.5Na_0.5TiO₃ (BNT)-based ceramics. The incorporation of the hypothetical perovskite BaAlO_2.5 with nominal oxygen defect into BNT will form strongly polarized directional defect dipoles, leading to a strong pinning effect after aging. The large asymmetrical strain is mainly attributed to two factors: The defect dipoles along crystallographic [001] direction destroy the long-range ordering of the ferroelectric and activate a reversible phase transition while promoting polarization rotation when the dipoles are aligned along the applied electric field. Our results not only demonstrate the potential application of BNT-based materials in low-frequency, large-stroke actuators but also provide a general methodology to achieve large strain.

Water Quenched and Acceptor-Doped Textured Piezoelectric Ceramics for Off-Resonance and On-Resonance Devices

Piezoelectric materials should simultaneously possess the soft properties (high piezoelectric coefficient, d₃₃ ; high voltage coefficient, g₃₃ ; high electromechanical coupling factor, k) and hard properties (high mechanical quality factor, Q_m ; low dielectric loss, tan δ) along with wide operation temperature (e.g., high rhombohedral-tetragonal phase transition temperature T_r-t ) for covering off-resonance (figure of merit (FOM), d₃₃  × g₃₃ ) and on-resonance (FOM, Q_m  × k² ) applications. However, achieving hard and soft piezoelectric properties simultaneously along with high transition temperature is quite challenging since these properties are inversely related to each other. Here, through a synergistic design strategy of combining composition/phase selection, crystallographic texturing, defect engineering, and water quenching technique, <001> textured 2 mol% MnO₂ doped 0.19PIN-0.445PSN-0.365PT ceramics exhibiting giant FOM values of Q_m  × k 31 2 $k_{31}^2$ (227-261) along with high d₃₃  × g₃₃ (28-35 × 10^-12 m² N^-1 ), low tan δ (0.3-0.39%) and high T_r-t of 140-190 °C, which is far beyond the performance of the state-of-the-art piezoelectric materials, are fabricated. Further, a novel water quenching (WQ) room temperature poling technique, which results in enhanced piezoelectricity of textured MnO₂ doped PIN-PSN-PT ceramics, is reported. Based upon the experiments and phase-field modeling, the enhanced piezoelectricity is explained in terms of the quenching-induced rhombohedral phase formation. These findings will have tremendous impact on development of high performance off-resonance and on-resonance piezoelectric devices with high stability.

Giant electric field-induced strain in lead-free piezoceramics

Piezoelectric actuators are indispensable over a wide range of industries for their fast response and precise displacement. Most commercial piezoelectric actuators contain lead, posing environmental challenges. We show that a giant strain (1.05%) and a large-signal piezoelectric strain coefficient (2100 picometer/volt) are achieved in strontium (Sr)-doped (K,Na)NbO₃ lead-free piezoceramics, being synthesized by the conventional solid-state reaction method without any post treatment. The underlying mechanism responsible for the ultrahigh electrostrain is the interaction between defect dipoles and domain switching. The fatigue resistance, thermal stability, and strain value (0.25%) at 20 kilovolt/centimeter are comparable with or better than those of commercial Pb(Zr,Ti)O₃-based ceramics, showing great potential for practical applications. This material may provide a lead-free alternative with a simple composition for piezoelectric actuators and a paradigm for the design of high-performance piezoelectrics.

Anisotropic dislocation-domain wall interactions in ferroelectrics

Dislocations are usually expected to degrade electrical, thermal and optical functionality and to tune mechanical properties of materials. Here, we demonstrate a general framework for the control of dislocation-domain wall interactions in ferroics, employing an imprinted dislocation network. Anisotropic dielectric and electromechanical properties are engineered in barium titanate crystals via well-controlled line-plane relationships, culminating in extraordinary and stable large-signal dielectric permittivity (≈23100) and piezoelectric coefficient (≈2470 pm V^-1). In contrast, a related increase in properties utilizing point-plane relation prompts a dramatic cyclic degradation. Observed dielectric and piezoelectric properties are rationalized using transmission electron microscopy and time- and cycle-dependent nuclear magnetic resonance paired with X-ray diffraction. Succinct mechanistic understanding is provided by phase-field simulations and driving force calculations of the described dislocation-domain wall interactions. Our 1D-2D defect approach offers a fertile ground for tailoring functionality in a wide range of functional material systems.

An Experimental Investigation on Polarization Process of a PZT-52 Tube Actuator with Interdigitated Electrodes

The manipulator is the key component of the micromanipulator. Using the axial expansion and contraction properties, the piezoelectric tube can drive the manipulator to achieve micro-motion positioning. It is widely used in scanning probe microscopy, fiber stretching and beam scanning. The piezoceramic tube actuator used to have continuous electrodes inside and outside. It is polarized along the radial direction. There are relatively high polarization voltages, but poor axial mechanical properties. A new tubular actuator is presented in this paper by combining interdigitated electrodes and piezoceramic tubes. The preparation, polarization and mesoscopic mechanical properties were investigated. Using Lead Zirconate Titanate (PZT-52) as a substrate, the preparation process of interdigitated electrodes by screen printing was studied. For initial polarization voltage determination, the local characteristic model of the actuator was extracted and the electric field was analyzed by a finite element method. By measuring the actuator's axial displacement, we measured the actuator's polarization effect. Various voltages, times and temperatures were evaluated to determine how polarization affects the actuator's displacement. Optimal polarization conditions are 800 V, 60 min and 150 °C, with a maximum displacement of 0.88 μm generated by a PZT-52 tube actuator with interdigitated electrodes. PZT-52 tube actuators with a continuous electrode cannot be polarized under these conditions. The maximum displacement is 0.47 μm after polarization at 4 kV. Based on the results, the new actuator has a more convenient polarization process and a greater axial displacement from an application standpoint. It provides technical guidance for the preparation and polarization of the piezoceramic tube actuator. There is potential for piezoelectric tubular actuators to be used in a broader range of applications.

Quenching and Electrical Current Poling Effect on Improved Ferroelectric and Piezoelectric Properties in BiFeO3-Based High-Temperature Piezoceramics

The effects of quenching on the structural, electrical, dielectric, ferroelectric (FE), and piezoelectric properties are investigated systematically in the 0.85BiFe_1-xCr_xO₃-0.15BaTi_1-xMn_xO₃ (0 ≤ x ≤ 0.03) ceramics. Optimal piezoelectricity and FE Curie temperature are obtained through optimized quenching rate and temperature. Quenching effect on piezoelectricity is especially significant for the samples near morphotropic phase boundaries (MPB), which can be ascribed to quenching-induced changes in phase ratio (rhombohedral and tetragonal phase) and domain structure/defect dipole orientation. Moreover, a new poling method, that is, cooling the sample at a constant dc current across FE T_C, is established to improve the piezoelectricity. This work not only reveals the possible mechanism of quenching effect on the improved piezoelectricity in the BFO-based piezoceramics (especially near the MPB) but also suggests an electric current poling strategy for improving piezoelectricity by suppressing the defect dipole effects in BFO-based and even other piezoelectrics.

Reversibly Controlled Ternary Polar States and Ferroelectric Bias Promoted by Boosting Square-Tensile-Strain

Interaction between dipoles often emerges intriguing physical phenomena, such as exchange bias in the magnetic heterostructures and magnetoelectric effect in multiferroics, which lead to advances in multifunctional heterostructures. However, the defect-dipole tends to be considered the undesired to deteriorate the electronic functionality. Here, deterministic switching between the ferroelectric and the pinched states by exploiting a new substrate of cubic perovskite, BaZrO₃ is reported, which boosts the square-tensile-strain to BaTiO₃ and promotes four-variants in-plane spontaneous polarization with oxygen vacancy creation. First-principles calculations propose a complex of an oxygen vacancy and two Ti³⁺ ions coins a charge-neutral defect-dipole. Cooperative control of the defect-dipole and the spontaneous polarization reveals ternary in-plane polar states characterized by biased/pinched hysteresis loops. Furthermore, it is experimentally demonstrated that three electrically controlled polar-ordering states lead to switchable and nonvolatile dielectric states for application of nondestructive electro-dielectric memory. This discovery opens a new route to develop functional materials via manipulating defect-dipoles and offers a novel platform to advance heteroepitaxy beyond the prevalent perovskite substrates.

High Velocity, Low-Voltage Collective In-Plane Switching in (100) BaTiO3 Thin Films

Ferroelectrics are being increasingly called upon for electronic devices in extreme environments. Device performance and energy efficiency is highly correlated to clock frequency, operational voltage, and resistive loss. To increase performance it is common to engineer ferroelectric domain structure with highly-correlated electrical and elastic coupling that elicit fast and efficient collective switching. Designing domain structures with advantageous properties is difficult because the mechanisms involved in collective switching are poorly understood and difficult to investigate. Collective switching is a hierarchical process where the nano- and mesoscale responses control the macroscopic properties. Using chemical solution synthesis, epitaxially nearly-relaxed (100) BaTiO₃ films are synthesized. Thermal strain induces a strongly-correlated domain structure with alternating domains of polarization along the [010] and [001] in-plane axes and 90° domain walls along the [011] or [01 1 ¯ $\bar{1}$ ] directions. Simultaneous capacitance-voltage measurements and band-excitation piezoresponse force microscopy revealed strong collective switching behavior. Using a deep convolutional autoencoder, hierarchical switching is automatically tracked and the switching pathway is identified. The collective switching velocities are calculated to be ≈500 cm s^-1 at 5 V (7 kV cm^-1 ), orders-of-magnitude faster than expected. These combinations of properties are promising for high-speed tunable dielectrics and low-voltage ferroelectric memories and logic.

Coherent Precipitates with Strong Domain Wall Pinning in Alkaline Niobate Ferroelectrics

High-power piezoelectric applications are predicted to share approximately one-third of the lead-free piezoelectric ceramic market in 2024 with alkaline niobates as the primary competitor. To suppress self-heating in high-power devices due to mechanical loss when driven by large electric fields, piezoelectric hardening to restrict domain wall motion is required. In the present work, highly effective piezoelectric hardening via coherent plate-like precipitates in a model system of the (Li,Na)NbO₃ (LNN) solid solution delivers a reduction in losses, quantified as an electromechanical quality factor, by a factor of ten. Various thermal aging schemes are demonstrated to control the average size, number density, and location of the precipitates. The established properties are correlated with a detailed determination of short- and long-range atomic structure by X-ray diffraction and pair distribution function analysis, respectively, as well as microstructure determined by transmission electron microscopy. The impact of microstructure with precipitates on both small- and large-field properties is also established. These results pave the way to implement precipitate hardening in piezoelectric materials, analogous to precipitate hardening in metals, broadening their use cases in applications.

Heterostrain-enabled ultrahigh electrostrain in lead-free piezoelectric

Piezoelectric materials provide high strain and large driving forces in actuators and can transform electrical energy into mechanical energy. Although they were discovered over 100 years ago, scientists are still searching for alternative lead-free piezoelectrics to reduce their environmental impact. Developing high-strain piezoelectric materials has been a long-term challenge, particularly challenging for the design of high-strain polycrystalline piezoelectrics containing no toxic lead element. In this work, we report one strategy to enhance the electrostrain via designing "heterostrain" through atomic-scale defect engineering and mesoscale domain engineering. We achieve an ultrahigh electrostrain of 2.3% at high temperature (220 °C) in lead-free polycrystalline ceramics, higher than all state-of-the-art piezoelectric materials, including lead-free and lead-based ceramics and single crystals. We demonstrate practical solutions for achieving high electrostrain in low-cost environmentally piezoelectric for various applications.

Origin of giant electric-field-induced strain in faulted alkali niobate films

A large electromechanical response in ferroelectrics is highly desirable for developing high-performance sensors and actuators. Enhanced electromechanical coupling in ferroelectrics is usually obtained at morphotropic phase boundaries requiring stoichiometric control of complex compositions. Recently it was shown that giant piezoelectricity can be obtained in films with nanopillar structures. Here, we elucidate its origin in terms of atomic structure and demonstrate a different system with a greatly enhanced response. This is in non-stoichiometric potassium sodium niobate epitaxial thin films with a high density of self-assembled planar faults. A giant piezoelectric coefficient of ∼1900 picometer per volt is demonstrated at 1 kHz, which is almost double the highest ever reported effective piezoelectric response in any existing thin films. The large oxygen octahedral distortions and the coupling between the structural distortion and polarization orientation mediated by charge redistribution at the planar faults enable the giant electric-field-induced strain. Our findings demonstrate an important mechanism for realizing the unprecedentedly giant electromechanical coupling and can be extended to many other material functions by engineering lattice faults in non-stoichiometric compositions.

Maximizing the electromechanical response is crucial for developing piezoelectric devices. Here, the authors demonstrate a giant electric-field-induced strain and its origin in alkali niobate epitaxial thin films with self-assembled planar faults.

Switchable Electric Dipole from Polaron Localization in Dielectric Crystals

Ferroelectricity in crystals is associated with the displacement of ions or rotations of polar units. Here we consider the dipole created by donor doping (D^{+}) and the corresponding bound polaron (e^{-}). A dipole of 6.15 Debye is predicted, from Berry phase analysis, in the Ruddlesden-Popper phase of Sr_{3}Ti_{2}O_{7}. A characteristic double-well potential is formed, which persists for high doping densities. The effective Hubbard U interaction can vary the defect state from metallic, a two-dimensional polaron, through to a zero-dimensional polaron. The ferroelectriclike behavior reported here is localized and distinct from conventional spontaneous lattice polarization.

Evolution from Lead-Based to Lead-Free Piezoelectrics: Engineering of Lattices, Domains, Boundaries, and Defects Leading to Giant Response

Piezoelectric materials are known to mankind for more than a century, with numerous advancements made in both scientific understandings and practical applications. In the last two decades, in particular, the research on piezoelectrics has largely been driven by the constantly changing technological demand, and the drive toward a sustainable society. Hence, environmental-friendly "lead-free piezoelectrics" have emerged in the anticipation of replacing lead-based counterparts with at least comparable performance. However, there are still obstacles to be overcome for realizing this objective, while the efforts in this direction already seem to culminate. Therefore, novel structural strategies need to be designed to address these issues and for further breakthrough in this field. Here, various strategies to enhance piezoelectric properties in lead-free systems with fundamental and historical context, and from atomic to macroscopic scale, are explored. The main challenges currently faced in the transition from lead-based to lead-free piezoelectrics are identified and key milestones for future research in this field are suggested. These include: i) decoding the fundamental mechanisms; ii) large temperature-stable piezoresponse; and iii) fabrication-friendly and tailorable composition. Strategic insights and general guidelines for the synergistic design of new piezoelectric materials for obtaining a large piezoelectric response are also provided.

Electromagnetic field controlled domain wall displacement for induced strain tailoring in BaTiO3-epoxy nanocomposite

Failure in an epoxy polymer composite material is prone to initiate by the coalescence of microcracks in its polymer matrix. As such, matrix toughening via addition of a second phase as rigid or/and rubber nano/micro-particles is one of the most popular approaches to improve the fracture toughness across multiple scales in a polymer composite, which dissipates fracture energy via deformation mechanisms and microcracks arrest. Few studies have focused on tailorable and variable toughening, so-called ‘active toughening’, mainly suggesting thermally induced strains which offer slow and irreversible toughening due to polymer’s poor thermal conductivity. The research presented in the current article has developed an instantaneous, reversible extrinsic strain field via remote electromagnetic radiation. Quantification of the extrinsic strain evolving in the composite with the microwave energy has been conducted using in-situ real-time fibre optic sensing. A theoretical constitutive equation correlating the exposure energy to micro-strains has been developed, with its solution validating the experimental data and describing their underlying physics. The research has utilised functionalised dielectric ferroelectric nanomaterials, barium titanate (BaTiO₃), as a second phase dispersed in an epoxy matrix, able to introduce microscopic electro-strains to their surrounding rigid epoxy subjected to an external electric field (microwaves, herein), as result of their domain walls dipole displacements. Epoxy Araldite LY1564, a diglycidyl ether of bisphenol A associated with the curing agent Aradur 3487 were embedded with the BaTiO₃ nanoparticles. The silane coupling agent for the nanoparticles’ surface functionalisation was 3-glycidoxypropyl trimethoxysilane (3-GPS). Hydrogen peroxide (H₂O₂, 30%) and acetic acid (C₂H₄O₂, 99.9%) used as functionalisation aids, and the ethanol (C₂H₆O, 99.9%) used for BaTiO₃ dispersion. Firstly, the crystal microstructure of the functionalised nanoparticles and the thermal and dielectric properties of the achieved epoxy composite materials have been characterised. It has been observed that the addition of the dielectric nanoparticles has a slight impact on the curing extent of the epoxy. Secondly, the surface-bonded fibre Bragg grating (FBG) sensors have been employed to investigate the real-time variation of strain and temperature in the epoxy composites exposed to microwaves at 2.45 GHz and at different exposure energy. The strains developed due to the in-situ exposure at composite, adhesive and their holding fixture material were evaluated using the FBG. The domain wall induced extrinsic strains were distinguished from the thermally induced strains, and found that the increasing exposure energy has an instantaneously increasing effect on the development of such strains. Post-exposure Raman spectra showed no residual field in the composite indicating no remnant strain field examined under microwave powers < 1000 W, thus suggesting a reversible strain introduction mechanism, i.e. the composite retaining its nominal properties post exposure. The dielectric composite development and quantifications presented in this article proposes a novel active toughening technology for high-performance composite applications in numerous sectors.

Engineering the Defects and Microstructures in Ferroelectrics for Enhanced/Novel Properties: An Emerging Way to Cope with Energy Crisis and Environmental Pollution

In the past century, ferroelectrics are well known in electroceramics and microelectronics for their unique ferroelectric, piezoelectric, pyroelectric, and photovoltaic effects. Nowadays, the advances in understanding and tuning of these properties have greatly promoted a broader application potential especially in energy and environmental fields, by harvesting solar, mechanical, and heat energies. For example, high piezoelectricity and high pyroelectricity can be designed by defect or microstructure engineering for piezo- and pyro-catalyst, respectively. Moreover, highly piezoelectric and broadband (UV-Vis-NIR) light-responsive ferroelectrics can be designed via defect engineering, giving rise to a new concept of photoferroelectrics for efficient photocatalysis, piezocatalysis, pyrocatalysis, and related cocatalysis. This article first summarizes the recent developments in ferroelectrics in terms of piezoelectricity, pyroelectricity, and photovoltaic effects based on defect and microstructure engineering. Then, the potential applications in energy generation (i.e., photovoltaic effect, H2 generation, and self-powered multisource energy harvesting and signal sensing) and environmental protection (i.e., photo-piezo-pyro- cocatalytic dye degradation and CO2 reduction) are reviewed. Finally, the outlook and challenges are discussed. This article not only covers an overview of the state-of-art advances of ferroelectrics, but also prospects their applications in coping with energy crisis and environmental pollution.

Reconfigurable Quasi-Nonvolatile Memory/Subthermionic FET Functions in Ferroelectric-2D Semiconductor vdW Architectures

The functional reconfiguration of transistors and memory in homogenous ferroelectric devices offers significant opportunities for implementing the concepts of in-memory computing and logic-memory monolithic integration. Thus far, reconfiguration is realized through programmable doping profiles in the semiconductor channel using multiple-gate operation. This complex device architecture limits further scaling to match the overall chip requirements. Here, reconfigurable memory/transistor functionalities in a ferroelectric-gated van der Waals transistor by controlling the behavior of ferroelectric oxygen vacancies at the interface are demonstrated. Short- and long-term memory functions are demonstrated by modulating the border oxygen vacancy distribution and the associated charge dynamics. The quasi-nonvolatile long-term memory exhibits data retention of over 10⁵ s and endurance of up to 5 × 10⁵ cycles, verifying its applicability as a potential device platform for neuromorphic networks. More importantly, by modulating the ferroelectricity of the interfacial domains with the interactions of oxygen vacancies, a hysteresis-free logic transistor is realized with a subthermionic subthreshold swing down to 46 mV dec^-1 , which resembles a negative-capacitance field-effect transistor. The new concept of achieving functional reconfiguration with prior device performance in a single-gate ferroelectric field-effect transistor is of great advantage in future integrated circuit applications.