Discovery of superconductivity in KTaO₃ by electrostatic carrier doping

Electrochemically driven physical properties of solid-state materials: action mechanisms and control schemes

The various physical properties recently induced by solid-state electrochemical reactions must be comprehensively understood, and their mechanisms of action should be elucidated. Reversible changes in conductivity, magnetism, and colour have been achieved by combining the redox reactions of d metal ions and organic materials, as well as the molecular and crystal structures of solids. This review describes the electrochemically driven physical properties of conductors, magnetic materials, and electrochromic materials using various electrochemical devices.

Advancing Superconductivity with Interface Engineering

The development of superconducting materials has attracted significant attention not only for their improved performance, such as high transition temperature (TC), but also for the exploration of their underlying physical mechanisms. Recently, considerable efforts have been focused on interfaces of materials, a distinct category capable of inducing superconductivity at non-superconducting material interfaces or augmenting the TC at the interface between a superconducting material and a non-superconducting material. Here, two distinct types of interfaces along with their unique characteristics are reviewed: interfacial superconductivity and interface-enhanced superconductivity, with a focus on the crucial factors and potential mechanisms responsible for enhancing superconducting performance. A series of materials systems is discussed, encompassing both historical developments and recent progress from the perspectives of technical innovations and the exploration of new material classes. The overarching goal is to illuminate pathways toward achieving high TC, expanding the potential of superconducting parameters across interfaces, and propelling superconductivity research toward practical, high-temperature applications.

Orientation-dependent electronic structure in interfacial superconductors LaAlO3/KTaO3

Emergent superconductivity at the LaAlO3/KTaO3 interfaces exhibits a mysterious dependence on the KTaO3 crystallographic orientations. Here by soft X-ray angle-resolved photoemission spectroscopy, we directly resolve the electronic structure of the LaAlO3/KTaO3 interfacial superconductors and the non-superconducting counterpart. We find that the mobile electrons that contribute to the interfacial superconductivity show strong k⊥ dispersion. Comparing the superconducting and non-superconducting interfaces, the quasi-three-dimensional electron gas with over 5.5 nm spatial distribution ubiquitously exists and shows similar orbital occupations. The signature of electron-phonon coupling is observed and intriguingly dependent on the interfacial orientations. Remarkably, the stronger electron-phonon coupling signature correlates with the higher superconducting transition temperature. Our observations help scrutinize the theories on the orientation-dependent superconductivity and offer a plausible and straightforward explanation. The interfacial orientation effect that can modify the electron-phonon coupling strength over several nanometers sheds light on the applications of oxide interfaces in general.

Surface inducing high-temperature superconductivity in layered metal carborides Li2BC3 and LiBC by metallizing σ electrons

Metallizing σ electrons provides a promising route to design high-temperature superconducting materials, such as MgB2 and high-pressure hydrides. Here, we focus on two MgB2-like layered carborides Li2BC3 and LiBC; their bulk does not have superconductivity because the B-C σ states are far away from the Fermi level (EF), however, based on first-principles calculations, we found that when their bulk systems are cleaved into surfaces with B-C termination, high Tc of ∼80 K could be observed in the exposed B-C layer on the surfaces. Detailed analysis reveals that surface symmetry reduction, due to lattice periodic breaking, not only introduces hole self-doping into surface B-C layers and shifts the σ-bonding states towards the EF - associated with emergent large electronic occupation, but also makes in-plane stretching modes on the surface layer experience significant softness. The enhanced σ states and softened phonon modes work to produce strong coupling, thus yielding high-Tc surface superconductivity, which distinctly differs from the superconducting features of the MgB2 film, which generates phonon stiffness accompanied by suppressed superconductivity. Our findings undoubtedly provide a novel platform to realize high-Tc surface superconductivity, and also clearly elucidate the microscopic mechanism of surface-enhanced superconductivity in favor of creating more high-Tc surface superconductors among MgB2-like layered materials.

Electronic Devices Based on Heterostructures of 2D Materials and Self-Assembled Monolayers

2D materials (2DMs), known for their atomically ultrathin structure, exhibit remarkable electrical and optical properties. Similarly, molecular self-assembled monolayers (SAMs) with comparable atomic thickness show an abundance of designable structures and properties. The strategy of constructing electronic devices through unique heterostructures formed by van der Waals assembly between 2DMs and molecular SAMs not only enables device miniaturization, but also allows for convenient adjustment of their structures and functions. In this review, the fundamental structures and fabrication methods of three different types of electronic devices dominated by 2DM-SAM heterojunctions with varying architectures are timely elaborated. Based on these heterojunctions, their fundamental functionalities and characteristics, as well as the regulation of their performance by external stimuli, are further discussed.

Coexistence of Ferromagnetism and Superconductivity at KTaO3 Heterointerfaces

The coexistence of superconductivity and ferromagnetism is a long-standing issue in superconductivity due to the antagonistic nature of these two ordered states. Experimentally identifying and characterizing novel heterointerface superconductors that coexist with magnetism presents significant challenges. Here, we report the observation of two-dimensional long-range ferromagnetic order in a KTaO3 heterointerface superconductor, showing the coexistence of superconductivity and ferromagnetism. Remarkably, our direct current superconducting quantum interference device measurements reveal an in-plane magnetization hysteresis loop persisting above room temperature. Moreover, first-principles calculations and X-ray magnetic circular dichroism measurements provide decisive insights into the origin of the observed robust ferromagnetism, attributing it to oxygen vacancies that localize electrons in nearby Ta 5d states. Our findings suggest KTaO3 heterointerfaces as time-reversal symmetry breaking superconductors, injecting fresh momentum into the exploration of the intricate interplay between superconductivity and magnetism enhanced by the strong spin-orbit coupling inherent to the heavy Ta in 5d orbitals.

Layer-Dependent Superconductivity in Iron-Based Superconductors CsCa2Fe4As4F2 and CaKFe4As4

In the quasi-two-dimensional superconductor NbSe2, the superconducting transition temperature (Tc) is layer-dependent, decreasing by about 60% in the monolayer limit. However, for the extremely anisotropic copper-based high-Tc superconductor Bi2Sr2CaCu2O8+δ (Bi-2212), the Tc of the monolayer is almost identical with that of its bulk counterpart. To clarify the effect of dimensionality on superconductivity, here, we successfully fabricate ultrathin flakes of iron-based high-Tc superconductors CsCa2Fe4As4F2 and CaKFe4As4. It is found that the Tc of monolayer CsCa2Fe4As4F2 (after tuning to the optimal doping by ionic liquid gating) is about 20% lower than that of the bulk crystal, while the Tc of three-layer CaKFe4As4 decreases by 46%, showing a more pronounced dimensional effect than that of CsCa2Fe4As4F2. By carefully examining their anisotropy and the c-axis coherence length, we reveal the general trend and empirical law of the layer-dependent superconductivity in these quasi-two-dimensional superconductors.

Emerging Two-Dimensional Conductivity at the Interface between Mott and Band Insulators

Intriguingly, conducting perovskite interfaces between ordinary band insulators are widely explored, whereas similar interfaces with Mott insulators are still not quite understood. Here, we address the (001), (110), and (111) interfaces between the LaTiO_{3} Mott, and large band gap KTaO_{3} insulators. Based on first-principles calculations, we reveal a mechanism of interfacial conductivity, which is distinct from a formerly studied one applicable to interfaces between polar wideband insulators. Here, the key factor causing conductivity is the matching of oxygen octahedra tilting in KTaO_{3} and LaTiO_{3} which, due to a small gap in the LaTiO_{3} results in its sensitivity to the crystal structure, yields metallization of its overlayer and following charge transfer from Ti to Ta. Our findings, also applicable to other Mott insulators interfaces, shed light on the emergence of conductivity observed in LaTiO_{3}/KTaO_{3} (110) where the "polar" arguments are not applicable and on the emergence of superconductivity in these structures.

Electronic-grade epitaxial (111) KTaO3 heterostructures

KTaO3 heterostructures have recently attracted attention as model systems to study the interplay of quantum paraelectricity, spin-orbit coupling, and superconductivity. However, the high and low vapor pressures of potassium and tantalum present processing challenges to creating heterostructure interfaces clean enough to reveal the intrinsic quantum properties. Here, we report superconducting heterostructures based on high-quality epitaxial (111) KTaO3 thin films using an adsorption-controlled hybrid PLD to overcome the vapor pressure mismatch. Electrical and structural characterizations reveal that the higher-quality heterostructure interface between amorphous LaAlO3 and KTaO3 thin films supports a two-dimensional electron gas with substantially higher electron mobility, superconducting transition temperature, and critical current density than that in bulk single-crystal KTaO3-based heterostructures. Our hybrid approach may enable epitaxial growth of other alkali metal-based oxides that lie beyond the capabilities of conventional methods.

What Makes On-Chip Microdevices Stand Out in Electrocatalysis?

Clean and sustainable energy conversion and storage through electrochemistry shows great promise as an alternative to traditional fuel or fossil-consumption energy systems. With regards to practical and high-efficient electrochemistry application, the rational design of active sites and the accurate description of mechanism remain a challenge. Toward this end, in this Perspective, a unique on-chip micro/nano device coupling nanofabrication and low-dimensional electrochemical materials is presented, in which material structure analysis, field-effect regulation, in situ monitoring, and simulation modeling are highlighted. The critical mechanisms that influence electrochemical response are discussed, and how on-chip micro/nano device distinguishes itself is emphasized. The key challenges and opportunities of on-chip electrochemical platforms are also provided through the Perspective.

Intrinsic ferromagnetism in two-dimensional 1T-MX2 monolayers with tunable magnetocrystalline anisotropy

Two-dimensional (2D) ferromagnetic materials with tunable magnetocrystalline anisotropy (MCA) provide unique opportunities for developing the next-generation data-storage and information devices. Herein we systematically investigate the electronic and magnetic properties of the 1T-MX2 (M = Cr, Mn, Fe, Co; X = As, Sb) monolayers, and identify the stable 2D ferromagnets as well as their MCA energies. Notably, the results demonstrate that the biaxial strain and carrier doping effects have a significant influence on their magnetic behaviors. In addition to the robust FM states, three FM monolayers yield tunable MCA depending on the applied strain type and carrier doping values. The dominant contributions to these complicated modifications in MCA are mainly attributed to the strain or carrier doping induced alterations of specific M-derived 3d states, which in turn lead to the changes of their spin-orbit coupling (SOC) energies. These findings show effective approaches to control 2D magnetism and suggest that these 2D FM materials may be promising candidates to design highly efficient memory devices.

First-principles calculation of electron-phonon coupling in doped KTaO3

Background: Motivated by the recent experimental discovery of strongly surface-plane-dependent superconductivity at surfaces of KTaO 3 single crystals, we calculate the electron-phonon coupling strength, λ, of doped KTaO 3 along the reciprocal-space high-symmetry directions. Methods:Using the Wannier-function approach implemented in the EPW package, we calculate λ across the experimentally covered doping range and compare its mode-resolved distribution along the [001], [110] and [111] reciprocal-space directions. Results: We find that the electron-phonon coupling is strongest in the optical modes around the Γ point, with some distribution to higher k values in the [001] direction. The electron-phonon coupling strength as a function of doping has a dome-like shape in all three directions and its integrated total is largest in the [001] direction and smallest in the [111] direction, in contrast to the experimentally measured trends in critical temperatures. Conclusions: This disagreement points to a non-BCS character of the superconductivity. Instead, the strong localization of λ in the soft optical modes around Γ suggests an importance of ferroelectric soft-mode fluctuations, which is supported by our findings that the mode-resolved λ values are strongly enhanced in polar structures. The inclusion of spin-orbit coupling has negligible influence on our calculated mode-resolved λ values.

Recent Advanced Applications of Ionic Liquid for Future Iontronics

Recently, electronic devices that make use of a state called the electric double layers (EDL) of ion have opened up a wide range of research opportunities, from novel physical phenomena in solid-state materials to next-generation low-power consumption devices. They are considered to be the future iontronics devices. EDLs behave as nanogap capacitors, resulting the high density of charge carriers is induced at semiconductor/electrolyte by applying only a few volts of the bias voltage. This enables the low-power operation of electronic devices as well as new functional devices. Furthermore, by controlling the motion of ions, ions can be used as semi-permanent charge to form electrets. In this article, we are going to introduce the recent advanced application of iontronics devices as well as energy harvesters making use of ion-based electrets, leading to the future iontronics research.

Modulations in Superconductors: Probes of Underlying Physics

The importance of modulations is elevated to an unprecedented level, due to the delicate conditions required to bring out exotic phenomena in quantum materials, such as topological materials, magnetic materials, and superconductors. Recently, state-of-the-art modulation techniques in material science, such as electric-double-layer transistor, piezoelectric-based strain apparatus, angle twisting, and nanofabrication, have been utilized in superconductors. They not only efficiently increase the tuning capability to the broader ranges but also extend the tuning dimensionality to unprecedented degrees of freedom, including quantum fluctuations of competing phases, electronic correlation, and phase coherence essential to global superconductivity. Here, for a comprehensive review, these techniques together with the established modulation methods, such as elemental substitution, annealing, and polarization-induced gating, are contextualized. Depending on the mechanism of each method, the modulations are categorized into stoichiometric manipulation, electrostatic gating, mechanical modulation, and geometrical design. Their recent advances are highlighted by applications in newly discovered superconductors, e.g., nickelates, Kagome metals, and magic-angle graphene. Overall, the review is to provide systematic modulations in emergent superconductors and serve as the coordinate for future investigations, which can stimulate researchers in superconductivity and other fields to perform various modulations toward a thorough understanding of quantum materials.

Spontaneous rotational symmetry breaking in KTaO3 heterointerface superconductors

Broken symmetries play a fundamental role in superconductivity and influence many of its properties in a profound way. Understanding these symmetry breaking states is essential to elucidate the various exotic quantum behaviors in non-trivial superconductors. Here, we report an experimental observation of spontaneous rotational symmetry breaking of superconductivity at the heterointerface of amorphous (a)-YAlO₃/KTaO₃(111) with a superconducting transition temperature of 1.86 K. Both the magnetoresistance and superconducting critical field in an in-plane field manifest striking twofold symmetric oscillations deep inside the superconducting state, whereas the anisotropy vanishes in the normal state, demonstrating that it is an intrinsic property of the superconducting phase. We attribute this behavior to the mixed-parity superconducting state, which is an admixture of s-wave and p-wave pairing components induced by strong spin-orbit coupling inherent to inversion symmetry breaking at the heterointerface of a-YAlO₃/KTaO₃. Our work suggests an unconventional nature of the underlying pairing interaction in the KTaO₃ heterointerface superconductors, and brings a new broad of perspective on understanding non-trivial superconducting properties at the artificial heterointerfaces.

Full Control of Solid-State Electrolytes for Electrostatic Gating

Ionic gating is a powerful technique to realize field-effect transistors (FETs) enabling experiments not possible otherwise. So far, ionic gating has relied on the use of top electrolyte gates, which pose experimental constraints and make device fabrication complex. Promising results obtained recently in FETs based on solid-state electrolytes remain plagued by spurious phenomena of unknown origin, preventing proper transistor operation, and causing limited control and reproducibility. Here, a class of solid-state electrolytes for gating (Lithium-ion conducting glass-ceramics, LICGCs) is explored, the processes responsible for the spurious phenomena and irreproducible behavior are identified, and properly functioning transistors exhibiting high density ambipolar operation with gate capacitance of ≈ 20   -   50   µ F c m - 2 \[20{\bm{ - }}50\;\mu F c{m^{{\bm{ - }}2}}\] (depending on the polarity of the accumulated charges) are demonstrated. Using 2D semiconducting transition-metal dichalcogenides, the ability to implement ionic-gate spectroscopy to determine the semiconducting bandgap, and to accumulate electron densities above 10¹⁴ cm^-2 are demostrated, resulting in gate-induced superconductivity in MoS₂ multilayers. As LICGCs are implemented in a back-gate configuration, they leave the surface of the material exposed, enabling the use of surface-sensitive techniques (such as scanning tunneling microscopy and photoemission spectroscopy) impossible so far in ionic-gated devices. They also allow double ionic gated devices providing independent control of charge density and electric field.

Surface Superconductivity with High Transition Temperatures in Layered CanBn+1Cn+1 Films

Proposed by Ginzberg nearly 60 years ago, surface superconductivity refers to the emergent phenomenon that the electrons on or near the surface of a material becomes superconducting despite its bulk is nonsuperconducting. Here, based on first-principles calculations within density functional theory, we predict that the superconducting transition temperature T_c at the surfaces of Ca_nB_n+1C_n+1 (n = 1, 2, 3, ...) films can be drastically enhanced to ∼90 K from 8 K for bulk CaBC. Our detailed analyses reveal that structural symmetry reduction at surfaces induces pronounced carrier self-doping into the surface B-C layer of the films and shifts the σ-bonding states toward the Fermi level; furthermore, the in-plane stretching modes of the surface layers experience significant softening. These two effects work collaboratively to strongly enhance the electron-phonon coupling, which in turn results in much higher T_c values than the McMillian limit. These findings point to new material platforms for realizing unusually high-T_c surface superconductivity.

Tunable superconductivity and its origin at KTaO3 interfaces

What causes Cooper pairs to form in unconventional superconductors is often elusive because experimental signatures that connect to a specific pairing mechanism are rare. Here, we observe distinct dependences of the superconducting transition temperature T_c on carrier density n_2D for electron gases formed at KTaO₃ (111), (001) and (110) interfaces. For the (111) interface, a remarkable linear dependence of T_c on n_2D is observed over a range of nearly one order of magnitude. Further, our study of the dependence of superconductivity on gate electric fields reveals the role of the interface in mediating superconductivity. We find that the extreme sensitivity of superconductivity to crystallographic orientation can be explained by pairing via inter-orbital interactions induced by an inversion-breaking transverse optical phonon and quantum confinement. This mechanism is also consistent with the dependence of T_c on n_2D. Our study may shed light on the pairing mechanism in other superconducting quantum paraelectrics.

Anisotropic superconductivity at KTaO3(111) interfaces

A two-dimensional, anisotropic superconductivity was recently found at the KTaO3(111) interfaces. The nature of the anisotropic superconducting transition remains a subject of debate. To investigate the origins of the observed behavior, we grew epitaxial KTaO3(111)-based heterostructures. We show that the superconductivity is robust against the in-plane magnetic field and violates the Pauli limit. We also show that the Cooper pairs are more resilient when the bias is along [11[Formula: see text]] (I ∥ [11[Formula: see text]]) and the magnetic field is along [1[Formula: see text]0] (B ∥ [1[Formula: see text]0]). We discuss the anisotropic nature of superconductivity in the context of electronic structure, orbital character, and spin texture at the KTaO3(111) interfaces. The results point to future opportunities to enhance superconducting transition temperatures and critical fields in crystalline, two-dimensional superconductors with strong spin-orbit coupling.

A multilevel electrolyte-gated artificial synapse based on ruthenium-doped cobalt ferrite

Synaptic devices that emulate synchronized memory and processing are considered the core components of neuromorphic computing systems for the low-power implementation of artificial intelligence. In this regard, electrolyte-gated transistors (EGTs) have gained much scientific attention, having a similar working mechanism as the biological synapses. Moreover, compared to a traditional solid-state gate dielectric, the liquid dielectric has the key advantage of inducing extremely large modulation of carrier density while overcoming the problem of electric pinholes, that typically occurs when using large-area films gated through ultra-thin solid dielectrics. Herein we demonstrate a three-terminal synaptic transistor based on ruthenium-doped cobalt ferrite (CRFO) thin films by electrolyte gating. In the CRFO-based EGT, we have obtained multilevel non-volatile conductance states for analog computing and high-density storage. Furthermore, the proposed synaptic transistor exhibited essential synaptic behavior, including spike amplitude-dependent plasticity, spike duration-dependent plasticity, long-term potentiation, and long-term depression successfully by applying electrical pulses. This study can motivate the development of advanced neuromorphic devices that leverage simultaneous modulation of electrical and magnetic properties in the same device and show a new direction to synaptic electronics.

Manipulating high-temperature superconductivity by oxygen doping in Bi2Sr2CaCu2O8+δ thin flakes

Harnessing the fascinating properties of correlated oxides requires precise control of their carrier density. Compared to other methods, oxygen doping provides an effective and more direct way to tune the electronic properties of correlated oxides. Although several approaches, such as thermal annealing and oxygen migration, have been introduced to change the oxygen content, a continuous and reversible solution that can be integrated with modern electronic technology is much in demand. Here, we report a novel ionic field-effect transistor using solid Gd-doped CeO2 as the gate dielectric, which shows a remarkable carrier-density-tuning ability via electric-field-controlled oxygen concentration at room temperature. In Bi2Sr2CaCu2O8+δ (Bi-2212) thin flakes, we achieve a reversible superconductor-insulator transition by driving oxygen ions in and out of the samples with electric fields, and map out the phase diagram all the way from the insulating regime to the over-doped superconducting regime by continuously changing the oxygen doping level. Scaling analysis indicates that the reversible superconductor-insulator transition for the Bi-2212 thin flakes follows the theoretical description of a two-dimensional quantum phase transition. Our work provides a route for realizing electric-field control of phase transition in correlated oxides. Moreover, the configuration of this type of transistor makes heterostructure/interface engineering possible, thus having the potential to serve as the next-generation all-solid-state field-effect transistor.

Nanoscale Control of the Metal-Insulator Transition at LaAlO3/KTaO3 Interfaces

Recent reports of superconductivity at KTaO₃ (KTO) (110) and (111) interfaces have sparked intense interest due to the relatively high critical temperature as well as other properties that distinguish this system from the more extensively studied SrTiO₃ (STO)-based heterostructures. Here, we report the reconfigurable creation of conducting structures at intrinsically insulating LaAlO₃/KTO(110) and (111) interfaces. Devices are created using two distinct methods previously developed for STO-based heterostructures: (1) conductive atomic-force microscopy lithography and (2) ultralow-voltage electron-beam lithography. At low temperatures, KTO(110)-based devices show superconductivity that is tunable by an applied back gate. A one-dimensional nanowire device shows single-electron-transistor (SET) behavior. A KTO(111)-based device is metallic but does not become superconducting. These reconfigurable methods of creating nanoscale devices in KTO-based heterostructures offer new avenues for investigating mechanisms of superconductivity as well as development of quantum devices that incorporate strong spin-orbit interactions, superconducting behavior, and nanoscale dimensions.

Superfluid stiffness of a KTaO3-based two-dimensional electron gas

After almost twenty years of intense work on the celebrated LaAlO₃/SrTiO₃system, the recent discovery of a superconducting two-dimensional electron gas (2-DEG) in (111)-oriented KTaO₃-based heterostructures injects new momentum to the field of oxides interface. However, while both interfaces share common properties, experiments also suggest important differences between the two systems. Here, we report gate tunable superconductivity in 2-DEGs generated at the surface of a (111)-oriented KTaO₃ crystal by the simple sputtering of a thin Al layer. We extract the superfluid stiffness of the 2-DEGs and show that its temperature dependence is consistent with a node-less superconducting order parameter having a gap value larger than expected within a simple BCS weak-coupling limit model. The superconducting transition follows the Berezinskii-Kosterlitz-Thouless scenario, which was not reported on SrTiO₃-based interfaces. Our finding offers innovative perspectives for fundamental science but also for device applications in a variety of fields such as spin-orbitronics and topological electronics.

Superconductivity from energy fluctuations in dilute quantum critical polar metals

Superconductivity in low carrier density metals challenges the conventional electron-phonon theory due to the absence of retardation required to overcome Coulomb repulsion. Here we demonstrate that pairing mediated by energy fluctuations, ubiquitously present close to continuous phase transitions, occurs in dilute quantum critical polar metals and results in a dome-like dependence of the superconducting T_c on carrier density, characteristic of non-BCS superconductors. In quantum critical polar metals, the Coulomb repulsion is heavily screened, while the critical transverse optical phonons decouple from the electron charge. In the resulting vacuum, long-range attractive interactions emerge from the energy fluctuations of the critical phonons, resembling the gravitational interactions of a chargeless dark matter universe. Our estimates show that this mechanism may explain the critical temperatures observed in doped SrTiO₃. We provide predictions for the enhancement of superconductivity near polar quantum criticality in two- and three-dimensional materials that can be used to test our theory.

Manipulation of 2DEG at double-doped high-entropy heterointerfaces

Chemical doping is a dominating method for manipulating oxide two-dimensional electron gas (2DEG). However, enhancing the doping level while maintaining the metallic conduction remains a challenge, which limits detailed knowledge of 2DEG manipulation. Herein, we propose a concept of high-entropy heterointerface, which consists of a complex oxide (containing at least 5 elements) at either or both sides of the interface. By doubly doping Sr and Mn elements in the Nd and Al sites of NdAlO₃, we grow Nd_1-xSr_xAl_1-xMn_xO₃ (NSAMO) films onto SrTiO₃ (STO) substrates to fabricate NSAMO/STO high-entropy heterointerfaces with different thicknesses (2-30 nm) and a wide range of doping ratios x (0.14-0.56). The 2DEG conducting behavior is maintained until x = 0.42, which is higher compared with similar studies. The varying x results in the coexistence of rich properties like a weak anti-localization (0.14-0.42), abnormal Hall effect (0.28 & 0.42), Lifshitz transition (0.42) and stable structure. These results confirm the potential of this strategy to tailor 2DEG in all-oxide interfaces.

Protonation enhanced superconductivity in PdTe2

Electrochemical ionic liquid gating is an effective way to intercalate ions into layered materials and modulate the properties. Here we report an enhanced superconductivity in a topological superconductor candidate PdTe₂through electrochemical gating procedure. The superconducting transition temperature was increased to approximately 3.2 K by ionic gating induced protonation at room temperature. Moreover, a further enhanced superconductivity of both superconducting transition temperature and superconducting volume fraction was observed after the gated samples were placed in a glove box for 2 months. This may be caused by the diffusion of protons in the gated single crystals, which is rarely reported in electrochemical ionic liquid gating experiments. Our results further the superconducting study of PdTe₂and may reveal a common phenomenon in the electrochemical gating procedure.

Two-dimensional superconductivity at the surfaces of KTaO3 gated with ionic liquid

The recent discovery of superconductivity at the interfaces between KTaO₃ and EuO (or LaAlO₃) gives birth to the second generation of oxide interface superconductors. This superconductivity exhibits a strong dependence on the surface plane of KTaO₃, in contrast to the seminal LaAlO₃/SrTiO₃ interface, and the superconducting transition temperature T_c is enhanced by one order of magnitude. For understanding its nature, a crucial issue arises: Is the formation of oxide interfaces indispensable for the occurrence of superconductivity? Exploiting ionic liquid (IL) gating, we are successful in achieving superconductivity at KTaO₃(111) and KTaO₃(110) surfaces with T_c up to 2.0 and 1.0 K, respectively. This oxide-IL interface superconductivity provides a clear evidence that the essential physics of KTaO₃ interface superconductivity lies in the KTaO₃ surfaces doped with electrons. Moreover, the controllability with IL technique paves the way for studying the intrinsic superconductivity in KTaO₃.

Chemical Potential Switching of the Anomalous Hall Effect in an Ultrathin Noncollinear Antiferromagnetic Metal

The discovery of the anomalous Hall effect in noncollinear antiferromagnetic metals represents one of the most important breakthroughs for the emergent antiferromagnetic spintronics. The tuning of chemical potential has been an important theoretical approach to varying the anomalous Hall conductivity, but the direct experimental demonstration has been challenging owing to the large carrier density of metals. In this work, an ultrathin noncollinear antiferromagnetic Mn₃ Ge film is fabricated and its carrier density is modulated by ionic liquid gating. Via a small voltage of ≈3 V, its carrier density is altered by ≈90% and, accordingly, the anomalous Hall effect is completely switched off. This work thus creates an attractive new way to steering the anomalous Hall effect in noncollinear antiferromagnets.

Computational design of a new layered superconductor LaOTlF2

A new layered compound LaOTlF₂ is designed and investigated using first-principles calculations in this work. The parent compound is an insulator with an indirect band gap of 3.88 eV. Electron-doping of the parent compound makes the material metallic. In the meantime, several lattice vibrational modes couple strongly to the conduction band, leading to a large electron-phonon coupling constant and conventional superconductivity. The highest superconducting transition temperature T_c is predicted to be approximately 8.6 K with λ about 1.25 in the optimally doped LaO_0.95F_0.05TlF₂, where λ is calculated using the Wannier interpolation technique.

Sub-Band Filling, Mott-like Transitions, and Ion Size Effects in C60 Single Crystal Electric Double Layer Transistors

Electric double layer transistors (EDLTs) based on C₆₀ single crystals and ionic liquid gates display pronounced peaks in sheet conductance versus gate-induced charge. Sheet conductance is maximized at electron densities near 0.5 e/C₆₀ and is suppressed near 1 e/C₆₀. The conductance suppression depends markedly on the choice of ionic liquid cation, with small cations favoring activated transport and essentially a complete shutdown of conductance at ∼1 e/C₆₀ and larger cations favoring band-like transport, higher overall conductances at all charge densities up to 1.7 e/C₆₀, and weaker suppression at 1 e/C₆₀. Displacement current measurements on C₆₀ EDLTs with small cations show clear evidence of sub-band filling at 1 e/C₆₀, which correlates very well with the minimum in the C₆₀ sheet conductance. Overall, the data suggest a significant Mott-Hubbard-like energy gap opens up in the surface density of states for C₆₀ crystals gated with small cations. The causes of this energy gap may include both electron-electron repulsion and electron-cation attraction at the crystal/ionic liquid interface. The energy gap suppresses the insulator-to-metal transition in C₆₀ EDLTs, but it can be manipulated by choice of electrolyte.

Emulation of Synaptic Plasticity on a Cobalt-Based Synaptic Transistor for Neuromorphic Computing

Neuromorphic computing (NC), which emulates neural activities of the human brain, is considered for the low-power implementation of artificial intelligence. Toward realizing NC, fabrication, and investigations of hardware elements─such as synaptic devices and neurons─are crucial. Electrolyte gating has been widely used for conductance modulation by massive carrier injections and has proven to be an effective way of emulating biological synapses. Synaptic devices, in the form of synaptic transistors, have been studied using various materials. Despite the remarkable progress, the study of metallic channel-based synaptic transistors remains massively unexplored. Here, we demonstrated a three-terminal electrolyte gating-modulated synaptic transistor based on a metallic cobalt thin film to emulate biological synapses. We have realized gating-controlled, non-volatile, and distinct multilevel conductance states in the proposed device. The essential synaptic functions demonstrating both short-term and long-term plasticity have been emulated in the synaptic device. A transition from short-term to long-term memory has been realized by tuning the gate pulse parameters, such as amplitude and duration. The crucial cognitive behavior, including learning, forgetting, and re-learning, has been emulated, showing a resemblance to the human brain. Beyond that, dynamic filtering behavior has been experimentally implemented in the synaptic device. These results provide an insight into the design of metallic channel-based synaptic transistors for NC.

KTaO3 -The New Kid on the Spintronics Block

Long after the heady days of high-temperature superconductivity, the oxides came back into the limelight in 2004 with the discovery of the 2D electron gas (2DEG) in SrTiO₃ (STO) and several heterostructures based on it. Not only do these materials exhibit interesting physics, but they have also opened up new vistas in oxide electronics and spintronics. However, much of the attention has recently shifted to KTaO₃ (KTO), a material with all the "good" properties of STO (simple cubic structure, high mobility, etc.) but with the additional advantage of a much larger spin-orbit coupling. In this state-of-the-art review of the fascinating world of KTO, it is attempted to cover the remarkable progress made, particularly in the last five years. Certain unsolved issues are also indicated, while suggesting future research directions as well as potential applications. The range of physical phenomena associated with the 2DEG trapped at the interfaces of KTO-based heterostructures include spin polarization, superconductivity, quantum oscillations in the magnetoresistance, spin-polarized electron transport, persistent photocurrent, Rashba effect, topological Hall effect, and inverse Edelstein Effect. It is aimed to discuss, on a single platform, the various fabrication techniques, the exciting physical properties and future application possibilities of this family of materials.

Ionic-Liquid Gating in Two-Dimensional TMDs: The Operation Principles and Spectroscopic Capabilities

Ionic-liquid gating (ILG) is able to enhance carrier densities well above the achievable values in traditional field-effect transistors (FETs), revealing it to be a promising technique for exploring the electronic phases of materials in extreme doping regimes. Due to their chemical stability, transition metal dichalcogenides (TMDs) are ideal candidates to produce ionic-liquid-gated FETs. Furthermore, as recently discovered, ILG can be used to obtain the band gap of two-dimensional semiconductors directly from the simple transfer characteristics. In this work, we present an overview of the operation principles of ionic liquid gating in TMD-based transistors, establishing the importance of the reference voltage to obtain hysteresis-free transfer characteristics, and hence, precisely determine the band gap. We produced ILG-based bilayer WSe₂ FETs and demonstrated their ambipolar behavior. We estimated the band gap directly from the transfer characteristics, demonstrating the potential of ILG as a spectroscopy technique.

Resonant tunneling driven metal-insulator transition in double quantum-well structures of strongly correlated oxide

The metal-insulator transition (MIT), a fascinating phenomenon occurring in some strongly correlated materials, is of central interest in modern condensed-matter physics. Controlling the MIT by external stimuli is a key technological goal for applications in future electronic devices. However, the standard control by means of the field effect, which works extremely well for semiconductor transistors, faces severe difficulties when applied to the MIT. Hence, a radically different approach is needed. Here, we report an MIT induced by resonant tunneling (RT) in double quantum well (QW) structures of strongly correlated oxides. In our structures, two layers of the strongly correlated conductive oxide SrVO₃ (SVO) sandwich a barrier layer of the band insulator SrTiO₃. The top QW is a marginal Mott-insulating SVO layer, while the bottom QW is a metallic SVO layer. Angle-resolved photoemission spectroscopy experiments reveal that the top QW layer becomes metallized when the thickness of the tunneling barrier layer is reduced. An analysis based on band structure calculations indicates that RT between the quantized states of the double QW induces the MIT. Our work opens avenues for realizing the Mott-transistor based on the wave-function engineering of strongly correlated electrons.

Light Controllable Electronic Phase Transition in Ionic Liquid Gated Monolayer Transition Metal Dichalcogenides

Ionic liquid gating has proved to be effective in inducing emergent quantum phenomena such as superconductivity, ferromagnetism, and topological states. The electrostatic doping at two-dimensional interfaces relies on ionic motion, which thus is operated at sufficiently high temperature. Here, we report the in situ tuning of quantum phases by shining light on an ionic liquid-gated interface at cryogenic temperatures. The light illumination enables flexible switching of the quantum transition in monolayer WS₂ from an insulator to a superconductor. In contrast to the prevailing picture of photoinduced carriers, we find that in the presence of a strong interfacial electric field conducting electrons could escape from the surface confinement by absorbing photons, mimicking the field emission. Such an optical tuning tool in conjunction with ionic liquid gating greatly facilitates continuous modulation of carrier densities and hence electronic phases, which would help to unveil novel quantum phenomena and device functionality in various materials.

Critical Thickness in Superconducting LaAlO_{3}/KTaO_{3}(111) Heterostructures

Recently, two-dimensional superconductivity was discovered at the oxide interface between KTaO_{3} and LaAlO_{3} (or EuO), whose superconducting transition temperature T_{c} is up to 2.2 K and exhibits strong crystalline-orientation dependence. However, the origin of the interfacial electron gas, which becomes superconducting at low temperatures, remains elusive. Taking the LaAlO_{3}/KTaO_{3}(111) interface as an example, we have demonstrated that there exists a critical LaAlO_{3} thickness of ∼3  nm. Namely, a thinner LaAlO_{3} film will give rise to an insulating but not conducting (or superconducting) interface. By in situ transport measurements during growth, we have also revealed that the critical thickness can be suppressed if exposure to oxygen is avoided. These observations, together with other control experiments, suggest strongly that the origination of the electron gas is dominated by the electron transfer that is from oxygen vacancies in the LaAlO_{3} film to the KTaO_{3} substrate.

Electric field control of superconductivity at the LaAlO3/KTaO3(111) interface

The oxide interface between LaAlO₃ and KTaO₃(111) can harbor a superconducting state. We report that by applying a gate voltage (V _G) across KTaO₃, the interface can be continuously tuned from superconducting into insulating states, yielding a dome-shaped T _c-V _G dependence, where T _c is the transition temperature. The electric gating has only a minor effect on carrier density but a strong one on mobility. We interpret the tuning of mobility in terms of change in the spatial profile of the carriers in the interface and hence, effective disorder. As the temperature is decreased, the resistance saturates at the lowest temperature on both superconducting and insulating sides, suggesting the emergence of a quantum metallic state associated with a failed superconductor and/or fragile insulator.

A large modulation of electron-phonon coupling and an emergent superconducting dome in doped strong ferroelectrics

We use first-principles methods to study doped strong ferroelectrics (taking BaTiO₃ as a prototype). Here, we find a strong coupling between itinerant electrons and soft polar phonons in doped BaTiO₃, contrary to Anderson/Blount’s weakly coupled electron mechanism for "ferroelectric-like metals”. As a consequence, across a polar-to-centrosymmetric phase transition in doped BaTiO₃, the total electron-phonon coupling is increased to about 0.6 around the critical concentration, which is sufficient to induce phonon-mediated superconductivity of about 2 K. Lowering the crystal symmetry of doped BaTiO₃ by imposing epitaxial strain can further increase the superconducting temperature via a sizable coupling between itinerant electrons and acoustic phonons. Our work demonstrates a viable approach to modulating electron-phonon coupling and inducing phonon-mediated superconductivity in doped strong ferroelectrics and potentially in polar metals. Our results also show that the weakly coupled electron mechanism for "ferroelectric-like metals” is not necessarily present in doped strong ferroelectrics.

Usually the coupling between polar phonons and itinerant electrons is weak in polar metals. Here, the authors show that in doped ferroelectrics (approximate polar metals), this coupling can be increased across the structural phase transition and as a result, phonon-mediated superconductivity emerges.

Impact of electrostatic doping on carrier concentration and mobility in InAs nanowires

We fabricate dual-gated electric double layer (EDL) field effect transistors based on InAs nanowires gated with an ionic liquid, and we perform electrical transport measurements in the temperature range from room temperature to 4.2 K. By adjusting the spatial distribution of ions inside the ionic liquid employed as gate dielectric, we electrostatically induce doping in the nanostructures under analysis. We extract low-temperature carrier concentration and mobility in very different doping regimes from the analysis of current-voltage characteristics and transconductances measured exploiting global back-gating. In the liquid gate voltage interval from -2 to 2 V, carrier concentration can be enhanced up to two orders of magnitude. Meanwhile, the effect of the ionic accumulation on the nanowire surface turns out to be detrimental to the electron mobility of the semiconductor nanostructure: the electron mobility is quenched irrespectively to the sign of the accumulated ionic species. The reported results shine light on the effective impact on crucial transport parameters of EDL gating in semiconductor nanodevices and they should be considered when designing experiments in which electrostatic doping of semiconductor nanostructures via electrolyte gating is involved.

Predicting the structural, electronic and magnetic properties of few atomic-layer polar perovskite

Density functional theory (DFT) calculations are performed to predict the structural, electronic and magnetic properties of electrically neutral or charged few-atomic-layer (AL) oxides based on polar perovskite KTaO3. Their properties vary greatly with the number of ALs (nAL) and the stoichiometric ratio. In the few-AL limit (nAL ≤ 14), the even AL (EL) systems with the chemical formula (KTaO3)n are semiconductors, while the odd AL (OL) systems with the formula Kn+1TanO3n+1 or KnTan+1O3n+2 are half-metal except for the unique KTa2O5 case which is a semiconductor due to the large Peierls distortions. After reaching a certain critical thickness (nAL > 14), the EL systems show ferromagnetic surface states, while ferromagnetism disappears in the OL systems. These predictions from fundamental complexity of polar perovskite when approaching the two-dimensional (2D) limit may be helpful for interpreting experimental observations later.

Chemistry in Superconductors

Superconductors with exotic physical properties are critical to current and future technology. In this review, we highlight several important superconducting families and focus on their crystal structure, chemical bonding, and superconductivity correlations. We connect superconducting materials with chemical bonding interactions based on their structure-property relationships, elucidating our empirically chemical approaches and other methods used in the discovery of new superconductors. Furthermore, we provide some technical strategies to synthesize superconductors and basic but important characterization for chemists needed when reporting new superconductors. In the end, we share our thoughts on how to make new superconductors and where chemists can work on in the superconductivity field. This review is written using chemical terms, with a focus on providing some chemically intuitive thoughts on superconducting materials design.

Two-Dimensional Superconductivity at the LaAlO_{3}/KTaO_{3}(110) Heterointerface

We report on the observation of a T_{c}∼0.9  K superconductivity at the interface between LaAlO_{3} film and the 5d transition metal oxide KTaO_{3}(110) single crystal. The interface shows a large anisotropy of the upper critical field, and its superconducting transition is consistent with a Berezinskii-Kosterlitz-Thouless transition. Both facts suggest that the superconductivity is two-dimensional (2D) in nature. The carrier density measured at 5 K is ∼7×10^{13}  cm^{-2}. The superconducting layer thickness and coherence length are estimated to be ∼8 and ∼30  nm, respectively. Our result provides a new platform for the study of 2D superconductivity at oxide interfaces.

Emerging Magnetic Interactions in van der Waals Heterostructures

Vertical van der Waals (vdWs) heterostructures based on layered materials are attracting interest as a new class of quantum materials, where interfacial charge-transfer coupling can give rise to fascinating strongly correlated phenomena. Transition metal chalcogenides are a particularly exciting material family, including ferromagnetic semiconductors, multiferroics, and superconductors. Here, we report the growth of an organic-inorganic heterostructure by intercalating molecular electron donating bis(ethylenedithio)tetrathiafulvalene into (Li,Fe)OHFeSe, a layered material in which the superconducting ground state results from the intercalation of hydroxide layer. Molecular intercalation in this heterostructure induces a transformation from a paramagnetic to spin-glass-like state that is sensitive to the stoichiometry of molecular donor and an applied magnetic field. Besides, electron-donating molecules reduce the electrical resistivity in the heterostructure and modify its response to laser illumination. This hybrid heterostructure provides a promising platform to study emerging magnetic and electronic behaviors in strongly correlated layered materials.

Superconductivity mediated by polar modes in ferroelectric metals

The occurrence of superconductivity in doped SrTiO₃ at low carrier densities points to the presence of an unusually strong pairing interaction that has eluded understanding for several decades. We report experimental results showing the pressure dependence of the superconducting transition temperature, T_c, near to optimal doping that sheds light on the nature of this interaction. We find that T_c increases dramatically when the energy gap of the ferroelectric critical modes is suppressed, i.e., as the ferroelectric quantum critical point is approached in a way reminiscent to behaviour observed in magnetic counterparts. However, in contrast to the latter, the coupling of the carriers to the critical modes in ferroelectrics is predicted to be small. We present a quantitative model involving the dynamical screening of the Coulomb interaction and show that an enhancement of T_c near to a ferroelectric quantum critical point can arise due to the virtual exchange of longitudinal hybrid-polar-modes, even in the absence of a strong coupling to the transverse critical modes.

Superconductivity in doped SrTiO₃ near to a ferroelectric quantum critical point emerges due to a strong interaction driving the formation of Cooper pairs, the nature of which has remained elusive for several decades.  Here, the authors reveal that pairing is due to the exchange of longitudinal hybrid polar modes rather than transverse critical modes.

Atomic Origin of Interface-Dependent Oxygen Migration by Electrochemical Gating at the LaAlO3-SrTiO3 Heterointerface

Electrical control of material properties based on ionic liquids (IL) has seen great development and emerging applications in the field of functional oxides, mainly understood by the electrostatic and electrochemical gating mechanisms. Compared to the fast, flexible, and reproducible electrostatic gating, electrochemical gating is less controllable owing to the complex behaviors of ion migration. Here, the interface-dependent oxygen migration by electrochemical gating is resolved at the atomic scale in the LaAlO3-SrTiO3 system through ex situ IL gating experiments and on-site atomic-resolution characterization. The difference between interface structures leads to the controllable electrochemical oxygen migration by filling oxygen vacancies. The findings not only provide an atomic-scale insight into the origin of interface-dependent electrochemical gating but also demonstrate an effective way of engineering interface structure to control the electrochemical gating.

The Jeff = 1/2 Antiferromagnet Sr2 IrO4 : A Golden Avenue toward New Physics and Functions

Iridates have been providing a fertile ground for studying emergent phases of matter that arise from the delicate interplay of various fundamental interactions with approximate energy scale. Among these highly focused quantum materials, the perovskite Sr₂ IrO₄ , which belongs to the Ruddlesden-Popper series, stands out and has been intensively addressed in the last decade, since it hosts a novel J_eff = 1/2 state that is a profound manifestation of strong spin-orbit coupling. Moreover, the J_eff = 1/2 state represents a rare example of iridates that is better understood both theoretically and experimentally. Here, Sr₂ IrO₄ is taken as an example to review the recent advances of the J_eff = 1/2 state in two aspects: materials fundamentals and functionality potentials. In the fundamentals part, the basic issues for the layered canted antiferromagnetic order of the J_eff = 1/2 magnetic moments in Sr₂ IrO₄ are illustrated, and then the progress of the antiferromagnetic order modulation through diverse routes is highlighted. Subsequently, for the functionality potentials, fascinating properties such as atomic-scale giant magnetoresistance, anisotropic magnetoresistance, and nonvolatile memory, are addressed. To conclude, prospective remarks and an outlook are given.

Solution-gated transistors of two-dimensional materials for chemical and biological sensors: status and challenges

Two-dimensional (2D) materials have been the focus of materials research for many years due to their unique fascinating properties and large specific surface area (SSA). They are very sensitive to the analytes (ions, glucose, DNA, protein, etc.), resulting in their wide-spread development in the field of sensing. New 2D materials, as the basis of applications, are constantly being fabricated and comprehensively studied. In a variety of sensing applications, the solution-gated transistor (SGT) is a promising biochemical sensing platform because it can work at low voltage in different electrolytes, which is ideal for monitoring body fluids in wearable electronics, e-skin, or implantable devices. However, there are still some key challenges, such as device stability and reproducibility, that must be faced in order to pave the way for the development of cost-effective, flexible, and transparent SGTs with 2D materials. In this review, the device preparation, device physics, and the latest application prospects of 2D materials-based SGTs are systematically presented. Besides, a bold perspective is also provided for the future development of these devices.

Effect of strain and doping on the polar metal phase in LiOsO3

We systematically investigate the effect of strain and doping on the polar metal phase in lithium osmate, LiOsO₃, using first-principles calculations. We demonstrate that the polar metal phase in LiOsO₃ can be controlled by biaxial strain. Based on density functional calculations, we show that a compressive biaxial strain enhances the stability of the polar R3c phase. On the other hand, a tensile biaxial strain favors the centrosymmetric [Formula: see text] structure. Thus, strain emerges as a promising control parameter over polar metallicity in this material. We uncover a strain-driven quantum phase transition under tensile strain, and highlight intriguing properties that could emerge in the vicinity of this polar to non-polar metal transition. We examine the effect of charge doping on the polar metal phase. By means of electrostatic doping as well as supercell calculations, we find that screening from additional charge carriers, expected to suppress the polar distortions, have only a small effect on them. Rather remarkably, and in contrast to conventional ferroelectrics, the polar metal phase in LiOsO₃ remains robust against charge doping up to large doping values.

Doping-Induced Superconductivity in the van der Waals Superatomic Crystal Re6Se8Cl2

Superatomic crystals are composed of discrete modular clusters that emulate the role of atoms in traditional atomic solids. Owing to their unique hierarchical structures, these materials are promising candidates to host exotic phenomena, such as doping-induced superconductivity and magnetism. Low-dimensional superatomic crystals in particular hold great potential as electronic components in nanocircuits, but the impact of doping in such compounds remains unexplored. Here we report the electrical transport properties of Re₆Se₈Cl₂, a two-dimensional superatomic semiconductor. We find that this compound can be n-doped in situ through Cl dissociation, drastically altering the transport behavior from semiconducting to metallic and giving rise to superconductivity with a critical temperature of ∼8 K and upper critical field exceeding 30 T. This work is the first example of superconductivity in a van der Waals superatomic crystal; more broadly, it establishes a new chemical strategy to manipulate the electronic properties of van der Waals materials with labile ligands.