Preparation of molecularly imprinted polymers specific to glycoproteins, glycans and monosaccharides via boronate affinity controllable–oriented surface imprinting

Boosting Cancer Immunotherapy via Reversing PD-L1-Mediated Immunosuppression with a Molecularly Imprinted Lysosomal Nanodegrader

Immune checkpoint blockade therapy has achieved important clinical advances in several types of tumors, particularly via targeting the PD-1/PD-L1 axis. However, existing therapeutic strategies that suppress the PD-1/PD-L1 signal pathway usually experience low treatment efficacy and the risk of causing autoimmune diseases. Herein, we report a cancer cell-targeted molecularly imprinted lysosomal nanodegrader (MILND) for boosting immune checkpoint blockade therapy against tumors. The MILND, imprinted with the N-terminal epitope of PD-L1 as an imprinting template, could specifically target the PD-L1 on tumor cells to promote cellular uptake. This process further induces the transport of PD-L1 into lysosomes for degradation, ultimately resulting in the downregulation of PD-L1 expression levels on tumor cells. As a result, a T cell-mediated immune response in the body was activated via the blockade of the PD-1/PD-L1 signaling pathway, which triggered a durable antitumor efficacy. In vivo experiments demonstrated that the MILND could effectively accumulate in tumor sites and exhibit strong tumor growth suppression efficacy in a xenograft tumor model without obvious side effects. Therefore, the MILND provides not only a promising strategy for boosting cancer immunotherapy but also insights for developing molecular imprinting-empowered nanomedicines.

Self-polymerization silica nanoparticles based molecularly imprinted polymers for selective recognition of protein

Molecularly imprinted polymers (MIPs) are promising for precise protein separation and purification. However, challenges persist due to their large size, variable configuration, and instability during preparation. Here, a simple silicon self-assembly program was designed to synthesize MIPs without any organic reagents and acid-base catalysis, avoiding the structural damage of protein under severe conditions. In this method, employing hemoglobin (Hb) as a model protein, with tween-20 in emulsification, and tetraethyl orthosilicate (TEOS) as the cross-linking agent, along with co-functional monomers 3-aminopropyltriethoxysilane (APTES) and benzyl(triethoxy)silane (BnTES), enhanced binding efficacy was achieved. Successful imprinting was evidenced through surface morphology observation and physical/chemical property evaluations of the synthesized MIPs. A series of adsorption experiments were performed to investigate the recognition performance of Hb-MIPs. The Hb-MIPs not only exhibited large adsorption capacity (400 μg/mg) and good imprinting factor (6.09) toward template protein, but also showed satisfactory selectivity for reference proteins. Five cycles of adsorption proved that the Hb-MIPs had good reusability. In addition, the successful isolation of HB from bovine blood indicated that Hb-MIPs were an excellent separation and purification material. The mild preparation conditions and good adsorption capacity demonstrated the potential value of this method in separation and purification research.

Development of surface molecular-imprinted electrochemical sensor for palmitic acid with machine learning assistance

Palmitic acid (PA) is a kind of saturated high fatty acid, which is involved in physiological safety and food quality. A surface molecularly imprinted polymer (MIP) electrochemical sensor was prepared on MXene surface using dopamine (DA) as functional monomer. The electrode was modified with gold nanoparticles (AuNPs), ferrocene-graphene oxide-multiwalled carbon nanotubes (Fc-GO-MWCNT) composite to enhance the electroactive area and conductivity. The sensor was characterized by scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), electrochemical impedance spectroscopy (EIS) and Differential pulse voltammetry (DPV), respectively. The parameters concerning this assay and various regeneration conditions have been carefully studied. The sensor can detect PA in the range of 1 nM-1 mM (R2 = 0.995), the limit of detection (LOD) is 0.48 nM (S/N = 3), and the limit of quantification (LOQ) is 1.61 nM. The artificial neural network (ANN) model in machine learning is further used to analyze the data collected by the sensor. The results show that the back propagation (BP) neural network in ANN is more suitable for the intelligent analysis of PA. The practicality of the sensor was confirmed by detecting PA in pork samples. This is the first MIP-based electrochemical sensor for PA, and it has great potential in practical applications.

Renin imprinted Poly(methyldopa) for biomarker detection and disease therapy

Conventional molecularly imprinted polymers (MIPs) perform their functions principally depended on their three dimensional (3D) imprinted cavities (recognition sites) of templates. Here, retaining the function of recognition sites resulted from the imprinting of template molecules, the role of functional monomers is explored and expanded. Briefly, a class of dual-functional renin imprinted poly(methyldopa) (RMIP) is prepared, consisting of a drug-type function monomer (methyldopa, clinical high blood pressure drug) and a corresponding disease biomarker (renin, biomarker for high blood pressure disease). To boost target-to-receptor binding ratio and sensitivity, the microstructure of recognition sites is beforehand calculated and designed by Density Functional Theory calculations, and the whole interfacial structure, property and thickness of RMIP film is regulated by adjusting the polymerization techniques. The dual-functional applications of RMIP for biomarker detection and disease therapy in vivo is explored. Such RMIP-based biosensors achieves highly sensitive biomarker detection, where the LODs reaches down to 1.31 × 10-6 and 1.26 × 10-6 ng mL-1 for electrochemical and chemical polymers, respectively, and the application for disease therapy in vivo has been verified where displays the obviously decreased blood pressure values of mice. No acute and long-term toxicity is found from the pathological slices, declaring the promising clinical application potential of such engineered RMIP nanostructure.

Fabricating Ultrathin Imprinting Layer for Fast Capture of Valsartan via a Metal Affinity-Oriented Surface Imprinting Method

Rapid separation and enrichment of targets in biological matrixes are of significant interest in multiple life sciences disciplines. Molecularly imprinted polymers (MIPs) have vital applications in extraction and sample cleanup owing to their excellent specificity and selectivity. However, the low mass transfer rate, caused by the heterogeneity of imprinted cavities in polymer networks and strong driving forces, significantly limits its application in high-throughput analysis. Herein, one novel metal affinity-oriented surface imprinting method was proposed to fabricate an MIP with an ultrathin imprinting layer. MIPs were prepared by immobilized template molecules on magnetic nanoparticles (NPs) with metal ions as bridges via coordination, and then polymerization was done. Under the optimized conditions, the thickness of the imprinting layer was merely 1 nm, and the adsorption toward VAL well matched the Langmuir model. Moreover, it took just 5 min to achieve adsorption equilibrium significantly faster than other reported MIPs toward VAL. Adsorption capacity still can reach 25.3 mg/g ascribed to the high imprinting efficiency of the method (the imprinting factor was as high as 5). All evidence proved that recognition sites were all external cavities and were evenly distributed on the surface of the NPs. The obtained MIP NPs exhibited excellent selectivity and specificity toward VAL, with good dispersibility and stability. Coupled with high-performance liquid chromatography, it was successfully used as a dispersed solid phase extraction material to determine VAL in serum. Average recoveries are over 90.0% with relative standard deviations less than 2.14% at three spiked levels (n = 3). All evidence testified that the MIPs fabricated with the proposed method showed a fast trans mass rate and a large rebinding capacity. The method can potentially use high-throughput separation and enrichment of target molecules in batch samples to meet practical applications.

Functional Interface for Glycoprotein Sensing: Focusing on Biosensors

Glycosylated proteins or glycoproteins make up a large family of glycoconjugates, and they participate in a variety of fundamental biological events. Glycoproteins have become important biomarkers in the diagnosis and treatment of a number of tumors. Biosensors are quite suitable for glycoprotein detection. The design and fabrication of a functional sensing interface play a crucial role in the biosensor construction to target glycoproteins. The functional interface, particularly receptors, typically determines the key characteristics of a biosensor, such as selectivity and sensitivity. Antibody, peptide, aptamer, boronic acid derivative, lectin, and molecularly imprinted polymer are all capable receptors for glycoprotein recognition, and each of these will be discussed. Most glycoproteins exist in low abundance, thus rendering signal amplification techniques indispensable. Nucleic acid-mediated and nanomaterial-mediated signal amplification for the detection of glycoproteins will be focused on herein. This review aims to highlight these different functional interfaces for glycoprotein sensing.

Glycan-Imprinted Nanoparticle as Artificial Neutralizing Antibody for Efficient HIV-1 Recognition and Inhibition

The HIV-1 envelope is a heavily glycosylated class 1 trimeric fusion protein responsible for viral entry into CD4+ immune cells. Developing neutralizing antibodies against the specific envelope glycans is an alternative method for antiviral therapies. This work presents the first-ever development and characterization of artificial neutralizing antibodies using molecular imprinting technology to recognize and bind to the envelope protein of HIV-1. The prepared envelope glycan-imprinted nanoparticles (GINPs) can successfully prevent HIV-1 from infecting target cells by shielding the glycans on the envelope protein. In vitro experiments showed that GINPs have strong affinity toward HIV-1 (Kd = 36.7 ± 2.2 nM) and possess high anti-interference and specificity. GINPs demonstrate broad inhibition activity against both tier 1 and tier 2 HIV-1 strains with a pM-level IC50 and exhibit a significant inhibitory effect on long-term viral replication by more than 95%. The strategy provides a promising method for the inhibition and therapy of HIV-1 infection.

Construction of a Novel Semiautomated Electrochemical Sensor Array Platform and Its Application in Multiplexed Monitoring of Antibiotic Therapy

At present, traditional analytical methods suffer from issues such as complex operation, expensive equipment, and a lengthy testing time. Electrochemical sensors have shown great advantages and application potential as an alternative solution. In this study, we proposed a novel semiautomated electrochemical sensor array (SAESA) platform. The sensor array was fabricated using screen-printed technology with a tubular design where all electrodes were printed on the inner wall. The integration of the tubular sensor array with a pipet allows for a semiautomated process including sampling and rinsing, which simplifies operation and reduces overall time. Each working electrode in the tubular sensor array underwent distinct decoration to get specific sensing responses toward the target analytes in a mixture environment (e.g., blood samples). To demonstrate the applicability of the developed sensing platform for simultaneous multianalyte detection, we chose antibiotic treatment for inflammatory infection as a model scenario and continuously measured three biomarkers, namely, tigecycline (TGC), procalcitonin (PCT), and alanine aminotransferase (ALT). The detection limits were 0.3 μM, 0.3 ng/L, and 2.76 U/L, respectively. The developed semiautomated electrochemical sensor array exhibits characteristics such as rapid and simple operation, portability, good selectivity, and excellent stability.

Monitoring of Medical Wastewater by Sensitive, Convenient, and Low-Cost Determination of Small Extracellular Vesicles Using a Glycosyl-Imprinted Sensor

The monitoring of small extracellular vesicles (sEVs) in medical waste is of great significance for the prevention of the spread of infectious diseases and the treatment of environmental pollutants in medical waste. Highly sensitive and selective detection methods are urgently needed due to the low content of sEVs in waste samples and the complex sample composition. Herein, a glycosyl-imprinted electrochemical sensor was constructed and a novel strategy for rapid, sensitive, and selective sEVs detection was proposed. The characteristic trisaccharide at the end of the glycosyl chain of the glycoprotein carried on the surface of the sEVs was used as the template molecule. The glycosyl-imprinted polymer films was then prepared by electropolymerization with o-phenylenediamine (o-PD) and 3-aminophenylboronic acid (m-APBA) as functional monomers. sEVs were captured by the imprinted cavities through the recognition and adsorption of glycosyl chains of glycoproteins on sEVs. The m-APBA molecule also acted as a signal probe and was then attached on the immobilized glycoprotein on the surface of sEVs by boric acid affinity. The electrochemical signal of m-APBA was amplificated due to the abundant glycoproteins on the surface of sEVs. The detection range of the sensor was 2.1 × 104 to 8.7 × 107 particles/mL, and the limit of detection was 1.7 × 104 particles/mL. The sensor was then applied to the determination of sEVs in medical wastewater and urine, which showed good selectivity, low detection cost, and good sensitivity.

Flexible molecularly imprinted fiber library for the metabolic analysis of bisphenol F and ecological risk evaluation

Bisphenol F (BPF) has evoked global attentions due to its ubiquity and detrimental effects. Herein, a flexible molecularly imprinted fiber library was firstly proposed for the metabolic analysis of BPF in aquatic ecosystems. The library includes flexible single fibers and fiber arrays to precisely identify BPF and its metabolites with a wide range of polarities. Compared to commercial polyacrylate, the performance increased 11.56-570.98-fold. The adsorption capacity and the LogKow value were positively related. These arrays were used for the acquisition of environmental metabolomics data from aquatic ecosystems. In-depth data analysis showed that risk quotient was lower than 0.76, and bioaccumulation factor was lower than 2000 L/kg. Distribution concentration of BPF and its metabolites changed seasonally, and accumulation in sediment was much larger than that in surface water and hydrobionts. The risk is gradually increasing in sediment, but it does not reach high risk. The likelihood of bioaccumulation of parent compounds was greater than its metabolites. The library can be used in the metabolic diagnosis of pollutants with a broad range of polarities, providing a new method to acquire data for further ecological risk assessment, and offering a revolutionary strategy for environmental metabolomics investigation in aquatic ecosystems.

Ultrasensitive molecular imprinted electrochemical sensor for in vivo determination of glycine betaine in plants

Glycine betaine (GB) is a bioactive molecule protecting plants from abiotic stress. This study fabricated an ultrasensitive molecular imprinted polymer (MIP) electrochemical sensor to perform in vivo measurements of GB. Polydopamine (PDA) was formed on the carboxylated multi-walled carbon nanotubes (COOH-MWCNTs) by spontaneous polymerisation of dopamine (DA). Then MIP-coated MWCNTs were fabricated on a Au nanoparticles (NP) and thionine (Thi) modified screen-printed electrode (SPE). The MIP-COOH-MWCNTs/pThi/AuNPs/SPE exhibited an ultrasensitive GB detection response between 1 fmol/L and 10 mmol/L (R2 = 0.996) with a low detection limit (0.707 fmol/L, S/N = 3). In vivo measurement of GB in cucumber seedling leaves under different salinity stress conditions confirmed the practical applicability of the MIP sensor. Thus, this study proposed a novel and promising fabrication method for an electrochemical MIP sensor that has broad application prospects in precision agriculture.

Glycan-specific molecularly imprinted polymers towards cancer diagnostics: merits, applications, and future perspectives

Aberrant glycans are a hallmark of cancer states. Notably, emerging evidence has demonstrated that the diagnosis of cancers with tumour-specific glycan patterns holds great potential to address unmet medical needs, especially in improving diagnostic sensitivity and selectivity. However, despite vast glycans having been identified as potent markers, glycan-based diagnostic methods remain largely limited in clinical practice. There are several reasons that prevent them from reaching the market, and the lack of anti-glycan antibodies is one of the most challenging hurdles. With the increasing need for accelerating the translational process, numerous efforts have been made to find antibody alternatives, such as lectins, boronic acids and aptamers. However, issues concerning affinity, selectivity, stability and versatility are yet to be fully addressed. Molecularly imprinted polymers (MIPs), synthetic antibody mimics with tailored cavities for target molecules, hold the potential to revolutionize this dismal progress. MIPs can bind a wide range of glycan markers, even those without specific antibodies. This capacity effectively broadens the clinical applicability of glycan-based diagnostics. Additionally, glycoform-resolved diagnosis can also be achieved through customization of MIPs, allowing for more precise diagnostic applications. In this review, we intent to introduce the current status of glycans as potential biomarkers and critically evaluate the challenges that hinder the development of in vitro diagnostic assays, with a particular focus on glycan-specific recognition entities. Moreover, we highlight the key role of MIPs in this area and provide examples of their successful use. Finally, we conclude the review with the remaining challenges, future outlook, and emerging opportunities.

An Electrochemiluminescent Sensor Based on Glycosyl Imprinting and Aptamer for the Detection of Cancer-Related Extracellular Vesicles

Cancer-related extracellular vesicles (EVs) are considered important biomarkers for cancer diagnosis because they can convey a large amount of information about tumor cells. In order to detect cancer-related EVs efficiently, an electrochemiluminescence (ECL) sensor for the specific identification and highly sensitive detection of EVs in the plasma of cancer patients was constructed based on dual recognitions by glycosyl-imprinted polymer (GIP) and aptamer. The characteristic glycosyl Neu5Ac-α-(2,6)-Gal-β-(1-4)-GlcNAc trisaccharide on the surface of EVs was used as a template molecule and 3-aminophenylboronic acid as a functional monomer to form a glycosyl-imprinted polymer by electropolymerization. After glycosyl elution, the imprinted film specifically recognized and adsorbed the EVs in the sample, and then the CD63 aptamer-bipyridine ruthenium (Aptamer-Ru(bpy)) was added to combine with the CD63 glycoprotein on the extracellular vesicle's surface, thus providing secondary recognition of the EVs. Finally, the EVs were quantitatively detected according to the ECL signal produced by the labeled bipyridine ruthenium. When more EVs were captured by the imprinted film, more probes were obtained after incubation, and the ECL signal was stronger. Under the optimized conditions, the ECL signal showed a good linear relationship with the concentration of EVs in the range of 9.5 × 102 to 9.5 × 107 particles/mL, and the limit of detection was 641 particles/mL. The GIP sensor can discriminate between the EV contents of cancer patients and healthy controls with high accuracy. Because of its affordability, high sensitivity, and ease of use, it is anticipated to be employed for cancer early detection and diagnosis.

Emerging trends in sensors based on molecular imprinting technology: Harnessing smartphones for portable detection and recognition

Molecular imprinting technology (MIT) has become a promising recognition technology in various fields due to its specificity, high efficiency, stability and eco-friendliness in the recognition of target. Molecularly imprinted polymers (MIPs), known as 'artificial receptors', are shown similar properties to natural receptors as a biomimetic material. The selectivity of recognition for targets can be greatly improved when MIPs are introduced into sensors, as known that MIPs, are suitable for the pretreatment and analysis of trace substances in complex matrix samples. At present, various sensors has been developed by the combination with MIPs for detecting and identifying trace compounds, biological macromolecules or other substances, such as optical, electrochemical and piezoelectric sensors. Smart phones, with their built-in sensors and powerful digital imaging capabilities, provide a unique platform for the needs of portability and instant detection. MIP sensors based on smart phones are expected to become a new research direction in the future. This review discusses the latest applications of MIP sensors in the field of detection and recognition in recent years, summarizes the frontier progress of MIP sensor research based on smart phones in the past two years, and points out the challenges, limitations and future development prospects.

Electron Lock Manipulates the Catalytic Selectivity of Nanozyme

Nanomaterials with enzyme-mimicking functions, termed nanozymes, offer attractive opportunities for biocatalysis and biomedicine. However, manipulating nanozyme selectivity poses an insurmountable hurdle. Here, we propose the concept of an energy-governed electron lock that controls electron transfer between nanozyme and substrates to achieve selectivity manipulation of enzyme-like catalysis. An electron lock can be constructed and opened, via modulating the nanozyme's electron energy to match the energy barrier of enzymatic reactions. An iron-doped carbon dot (FeCD) nanozyme with easy-to-regulate electron energy is selected as a proof of concept. Through regulating the conduction band which dominates electron energy, activatable oxidase and selective peroxidase (POD) with substrate affinity 123-fold higher than that of natural horseradish peroxidase (HRP) is achieved. Furthermore, while maintaining selectivity, FeCDs exhibit catalytic kinetics comparable to that of HRP upon transforming photons into electrons. Superior selectivity, efficient catalysis, and undetectable biotoxicity energize FeCDs as potent targeted drugs on antibiotic-resistant bacterial abscesses. An electron lock provides a robust strategy to manipulate selectivity toward advanced nanozymes.

Recent Advances in Molecular Imprinting for Proteins on Magnetic Microspheres

The separation of proteins in biological samples plays an essential role in the development of disease detection, drug discovery, and biological analysis. Protein imprinted polymers (PIPs) serve as a tool to capture target proteins specifically and selectively from complex media for separation purposes. Whereas conventional molecularly imprinted polymer is time-consuming in terms of incubation studies and solvent removal, magnetic particles are introduced using their magnetic properties for sedimentation and separation, resulting in saving extraction and centrifugation steps. Magnetic protein imprinted polymers (MPIPs), which combine molecularly imprinting materials with magnetic properties, have emerged as a new area of research hotspot. This review provides an overview of MPIPs for proteins, including synthesis, preparation strategies, and applications. Moreover, it also looks forward to the future directions for research in this emerging field.

Molecular Imprinting Technology Enables Proactive Capture of Nitrogen for Boosted Ammonia Synthesis under Ambient Conditions

Electrochemical nitrogen reduction reaction (NRR) is a burgeoning field for green and sustainable ammonia production, in which numerous potential catalysts emerge endlessly. However, satisfactory performances are still not realized under practical applications due to the limited solubility and sluggish diffusion of nitrogen at the interface. Herein, molecular imprinting technology is adopted to construct an adlayer with abundant nitrogen imprints on the electrocatalyst, which is capable of selectively recognizing and proactively aggregating high-concentrated nitrogen at the interface while hindering the access of overwhelming water simultaneously. With this favorable microenvironment, nitrogen can preferentially occupy the active surface, and the NRR equilibrium can be positively shifted to facilitate the reaction kinetics. Approximately threefold improvements in both ammonia production rate (185.7 µg h-1 mg-1 ) and Faradaic efficiency (72.9%) are achieved by a metal-free catalyst compared with the bare one. It is believed that the molecular imprinting strategy should be a general method to find further applicability in numerous catalysts or even other reactions facing similar challenges.

In situ digestion-assisted multi-template imprinted nanoparticles for efficient analysis of protein phosphorylation

A new general approach called in situ digestion-assisted multi-template imprinting is proposed for preparation of phospho-specific molecularly imprinted nanoparticles. Through the novel templating strategy and controllable imprinting process, imprinted nanoparticles specific to the intact phosphoprotein and its phosphopeptides were synthesized. The prepared imprinted nanoparticles exhibited excellent specificity (cross reactivity < 10%), high affinity (10-6 M), high efficiency (47.5%), and good generality (both intact phosphoprotein and phosphopeptides). We also realized the fine tuning of the recognition at peptide level of the imprinted nanoparticles by adjusting the imprinting time. Based on the selective enrichment of the imprinted nanoparticles, the MS identification of both the intact phosphoprotein (Tau) and phosphopeptides (angiotensin II and peptides of Tau) in real complex samples could be achieved. Therefore, we believe that the in situ digestion-assisted multi-template imprinting strategy holds promising future in both phosphorylation analysis and proteomics applications.

Sequentially Controlled Recognition of Different Proteins Using Programmable Protein Imprinted Nanospheres

Although protein imprinted materials with multiple templates are developed to selectively separate different proteins, it is difficult to achieve the programmed adsorption and separation of different proteins using one material, because the available protein imprinted materials are constructed through irreversible crosslinking and their structures are unprogrammable and non-reconstructive. Herein, a novel nanosphere (MS@PTL-g-PNIPAM) is designed, which not only is temperature and pH responsive but also can dynamically reversibly crosslink/de-crosslink under ultraviolet light of different wavelengths. With the help of the dynamically reversible photo-crosslinking, the nanospheres can be repeatedly programmed into protein imprinted nanospheres toward different target proteins. Moreover, the prepared imprinted nanospheres can easily achieve the controlled rebinding and release of target proteins, benefiting from the introduced temperature- and pH-responsive moieties. As a consequence, this study realizes the specific separation of different target proteins from protein mixture and the real bovine blood sequentially by programming one material. It is resource saving, time saving, recyclable, and it will provide convenience for protein imprinted materials to use in the blood purification, drug delivery, and virus detection.

Fabrication and application of molecularly imprinted polymer doped carbon dots coated silica stationary phase

Facing the difficulties in chromatographic separation of polar compounds, this investigation devotes to developing novel stationary phase. Molecularly imprinted polymers (MIPs) have aroused wide attention, owing to their outstanding selectivity, high stability, and low cost. In this work, a novel stationary phase based on carbon dots (CDs), MIP layer, and silica beads was synthesized to exploit high selectivity of MIPs, excellent physicochemical property of CDs, and outstanding chromatographic performances of silica microspheres simultaneously. The MIP doped CDs coated silica (MIP-CDs/SiO₂) stationary phase was systematically characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area measurement, and carbon elemental analysis. Furthermore, the chromatographic performance of the MIP-CDs/SiO₂ column was thoroughly assessed by using a wide variety of compounds (including nucleosides, sulfonamides, benzoic acids, and some other antibiotics). Meanwhile, the separation efficiency of the MIP-CDs/SiO₂ stationary phase was superior to other kinds of stationary phases (e.g. nonimprinted NIP-CDs/SiO₂, MIP/SiO₂, and C18-SiO₂). The results demonstrated that MIP-CDs/SiO₂ column exhibited best performance in terms of chromatographic separation. For all tested compounds, the resolution value was not less than 1.60, and the column efficiency of MIP-CDs/SiO₂ for thymidine was 22,740 plates/m. The results further indicate that the MIP-CDs/SiO₂ column can combine the good properties of MIP, CDs, with those of silica microbeads. Therefore, the developed MIP-CDs/SiO₂ stationary phase can be applied in the separation science and chromatography-based techniques.

Electrochemical detection of glycoproteins using boronic acid-modified metal-organic frameworks as dual-functional signal reporters

The sensitive analysis of glycoproteins is of great importance for early diagnosis and prognosis of diseases. In this work, a sandwich-type electrochemical aptasensor was developed for the detection of glycoproteins using 4-formylphenylboric acid (FPBA)-modified Cu-based metal-organic frameworks (FPBA-Cu-MOFs) as dual-functional signal probes. The target captured by the aptamer-modified electrode allowed the attachment of FPBA-Cu-MOFs based on the interaction between boronic acid and glycan on glycoproteins. Large numbers of Cu2+ ions in FPBA-Cu-MOFs produced an amplified signal for the direct voltammetric detection of glycoproteins. The electrochemical aptasensor showed a detection limit as low as 6.5 pg mL-1 for prostate specific antigen detection. The method obviates the use of antibody and enzymes for molecular recognition and signal output. The dual-functional MOFs can be extended to the design of other biosensors for the determination of diol-containing biomolecules in clinical diagnosis.

Bovine Serum Albumin Molecularly Imprinted Electrochemical Sensors Modified by Carboxylated Multi-Walled Carbon Nanotubes/CaAlg Hydrogels

In this paper, sodium alginate (NaAlg) was used as functional monomers, bovine serum albumin (BSA) was used as template molecules, and calcium chloride (CaCl2) aqueous solution was used as a cross-linking agent to prepare BSA molecularly imprinted carboxylated multi-wall carbon nanotubes (CMWCNT)/CaAlg hydrogel films (MIPs) and non-imprinted hydrogel films (NIPs). The adsorption capacity of the MIP film for BSA was 27.23 mg/g and the imprinting efficiency was 2.73. The MIP and NIP hydrogel film were loaded on the surface of the printed electrode, and electrochemical performance tests were carried out by electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) using the electrochemical workstation. The loaded MIP film and NIP film effectively improved the electrochemical signal of the bare carbon electrode. When the pH value of the Tris HCl elution solution was 7.4, the elution time was 15 min and the adsorption time was 15 min, and the peak currents of MIP-modified electrodes and NIP-modified electrodes reached their maximum values. There was a specific interaction between MIP-modified electrodes and BSA, exhibiting specific recognition for BSA. In addition, the MIP-modified electrodes had good anti-interference, reusability, stability, and reproducibility. The detection limit (LOD) was 5.6 × 10-6 mg mL-1.

Biosensors with Boronic Acid-Based Materials as the Recognition Elements and Signal Labels

It is of great importance to have sensitive and accurate detection of cis-diol-containing biologically related substances because of their important functions in the research fields of metabolomics, glycomics, and proteomics. Boronic acids can specifically and reversibly interact with 1,2- or 1,3-diols to form five or six cyclic esters. Based on this unique property, boronic acid-based materials have been used as synthetic receptors for the specific recognition and detection of cis-diol-containing species. This review critically summarizes the recent advances with boronic acid-based materials as recognition elements and signal labels for the detection of cis-diol-containing biological species, including ribonucleic acids, glycans, glycoproteins, bacteria, exosomes, and tumor cells. We also address the challenges and future perspectives for developing versatile boronic acid-based materials with various promising applications.

Linking peptide-oriented surface imprinting magnetic nanoparticle with carbon nanotube-based fluorescence signal output device for ultrasensitive detection of glycoprotein

Determination of trace glycoprotein has important guiding significance in clinical diagnosis and is usually achieved by immunoaffinity. However, immunoaffinity possesses inherent drawbacks, such as poor probability of high-quality antibodies, instability of biological reagents, and harmfulness of chemical labels to the body. Herein, we propose an innovative method of peptide-oriented surface imprinting to fabricate artificial antibody for recognition of glycoprotein. By integrating peptide-oriented surface imprinting and PEGylation, an innovative hydrophilic peptide-oriented surface imprinting magnetic nanoparticle (HPIMN) was successfully fabricated with human epidermal growth factor receptor-2 (HER2) as a model glycoprotein template. In addition, we further prepared a novel boronic acid-modified/fluorescein isothiocyanate-loaded/polyethylene glycol-covered carbon nanotube (BFPCN) as fluorescence signal output device, which was loaded with numerous fluorescent molecules could specifically label the cis-diol of glycoprotein at physiological pH via boronate-affinity interaction. To prove the practicability, we proposed a HPIMN-BFPCN strategy, in which the HPIMN first selectively captured the HER2 due to the molecular imprinted recognition and then the BFPCN specific labeled the exposed cis-diol of HER2 based on the boronate-affinity reaction. The HPIMN-BFPCN strategy exhibited ultrahigh sensitivity with limit of detection of 14 fg mL^-1 and was successfully used in the determination of HER2 in spiked sample with recovery and relative standard deviation in the range of 99.0%-103.0% and 3.1%-5.6%, respectively. Therefore, we believe that the novel peptide-oriented surface imprinting has great potential to become an universal strategy for fabrication of recognition units for other protein biomarkers, and the synergy sandwich assay could become a powerful tool in prognosis evaluation and clinical diagnosis of glycoprotein-related diseases.

Microfluidic synthesis of pH-responsive molecularly imprinted silica nanospheres for fluorescence sensing target glycoprotein

Here, fluorescent artificial antibodies for sensing ovalbumin in food were synthesized by molecular imprinting technique in a microfluidic reactor. A phenylboronic acid-functionalized silane was employed as the functional monomer to enable the polymer has pH-responsive property. Fluorescent molecularly imprinted polymers (FMIPs) could be produced continuously in a short time. Both fluorescein isothiocyanate (FITC) and rhodamine B isothiocyanate (RB)-based FMIPs can specifically recognize the target ovalbumin, particularly FITC-based FMIP, giving an imprinting factor of 2.5 and cross-reactivity factors of 2.7 (ovotransferrin), 2.8 (β-lactoglobulin) and 3.4 (bovine serum albumin), and was applied for the detection of ovalbumin in milk powder with recovery rates of 93-110%; moreover, the FMIP can be reused at least four times. Such FMIPs have promising future in replacing the fluorophore-labelled antibodies to fabricate fluorescent sensing devices or establish immunoassay methods, which have extra merits of low-cost, high stability and recyclability, easy to carry and store at ambient environments.

Precise identification and ultrafast transport of specific molecules with nanofluid-functionalized imprinted membrane

Membrane-based imprinted sites for achieving specific molecule transport and precise recognition have great potential to revolutionize nanofiltration technology. Nonetheless, how to efficiently prepare imprinted membrane structures with accurate identification - ultrafast molecular transport - high stability in mobile phase remains a key issue and serious challenge. Herein, we have developed a dual-activation strategy to constructing nanofluid-functionalized membranes with double imprinted nanoscale channels (NMDINCs), realizing ultrafast transport performance as well as structure&size-exclusion selectivity in allusion to particular compounds. The resultant NMDINCs, founded on principal nanofluid-functionalized construction companied by the boronate affinity sol-gel imprinting systems, illustrated that delicate regulation towards polymerization framework as well as functionalization belonging to distinctive membrane structures was crucial for realizing ultrafast molecules transport combined with prominent molecules selectivity. The synergistic recognition of covalent bonds and non-covalent bonds driven by two functional monomers effectively realized the selective recognition to template molecules, leading to the high selective separation factors of Shikimic acid (SA)/ Para hydroxybenzoic acid（PHA）, SA/ P nitrophenol（PN）and catechol（CL）for 8.9, 8.14 and 7.23, respectively. The dynamic consecutive transport outcomes exhibited that numerous SA-dependent recognition sites could still keep reactivity under pump-driven permeation pressure for appreciable time, forcefully proving the successful construction as to high-efficiency membrane-based selective separation system. It is anticipated that this strategy as to the in situ introduction of nanofluid-functionalized construction into porous membrane would hold great promise in preparing high-intensities membrane-founded discriminating separation systems, which was equipped with prominent consecutive permeability as well as excellent selectivity.

Leveraging Macrophage-Mediated Cancer Immunotherapy via a Cascading Effect Induced by a Molecularly Imprinted Nanocoordinator

Reprogramming tumor-associated macrophages (TAMs) has emerged as a promising strategy in cancer immunotherapy. Targeted therapeutics integrating multiple functions to fully leverage the antitumor immune functions of macrophages without affecting systemic or tissue-resident macrophages are crucial for TAM reprogramming. Herein, by integrating molecular imprinting and nanotechnology, we rationally designed and engineered an unprecedented nanocoordinator for targeted remolding of TAMs to fully leverage the antitumor efficacy of macrophages by inducing a cascade effect. The nanocoordinator features a magnetic iron oxide nanoinner core and sialic acid-imprinted shell. Intravenously administered into systemic circulation, the nanocoordinator can rapidly accumulate at the tumor site in response to an external magnet. Then, by specifically binding to sialic acid overexpressed on tumor cells, the nanocoordinator anchors at the tumor site with prolonged retention time. Via binding with the nanocoordinator, tumor cells are tagged with a foreign substance, which promotes the intrinsic phagocytosis of macrophages. Subsequently, the nanocoordinator taken up by macrophages effectively promotes the polarization of macrophages toward the M1 phenotype, thus activating the immunotherapeutic efficacy of macrophages. Synergized by the cascade effect, this nanocoordinator effectively harnesses TAMs for macrophage-mediated immunotherapy. This study offers new TAM-targeted therapeutics that allows us to fully leverage the antitumor immune functions of macrophages without affecting the normal tissue.

Functionalized pyrite nanozyme probe and imprinted polymer modified with hydrophilic layer for rapid colorimetric analysis of glycoprotein in serum

The biological molecules used in the sandwich detection method have problems such as complex extraction processes, high costs, and uneven quality. Therefore we integrated glycoprotein molecularly controllable-oriented surface imprinted magnetic nanoparticles (GMC-OSIMN) and boric acid functionalized pyrite nanozyme probe (BPNP) to replace the traditional antibody and horseradish peroxidase for sensitive detection of glycoproteins through sandwich detection. In this work, a novel nanozyme functionalized with boric acid was used to label glycoproteins that were captured by GMC-OSIMN. The substrate in the working solution catalyzed by the nanozyme labeled on the protein underwent visible color changes to the naked eye, and the generated signal can be quantitatively detected by a spectrophotometer, and the best color development conditions of the novel nanozyme under the influence of many factors were determined through multi-dimensional investigation. The optimum conditions of sandwich are optimized with ovalbumin (OVA), and it was extended to the detection of transferrin (TRF) and alkaline phosphatase (ALP) in the application. The detection range for TRF was 2.0 × 10^-1-1.0 × 10⁴ ng mL^-1 with a detection limit of 1.32 × 10^-1 ng mL^-1, The detection range for ALP was 2.0 × 10^-3-1.0 × 10² U L^-1 with the detection limit of 1.76 × 10^-3 U L^-1. This method was subsequently used to detect TRF and ALP levels in 16 liver cancer patients, and the standard deviation of the test results of each patient was less than 5.7%.

A surface molecularly imprinted electrochemical biosensor for the detection of SARS-CoV-2 spike protein by using Cu7S4-Au as built-in probe

Sensitive detection of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) spike protein (S protein) is of significant clinical importance in the diagnosis of COVID-19 pandemic. In this work, a surface molecularly imprinted (SMI) electrochemical biosensor is fabricated for the detection of SARS-CoV-2 S protein. Cu₇S₄-Au is used as the built-in probe and modified on the surface of a screen-printed carbon electrode (SPCE). 4-Mercaptophenylboric acid (4-MPBA) is anchored to the surface of the Cu₇S₄-Au through Au-SH bonds, which can be used for the immobilization of the SARS-CoV-2 S protein template through boronate ester bonds. After that, 3-aminophenylboronic acid (3-APBA) is electropolymerized on the electrode surface and used as the molecularly imprinted polymers (MIPs). The SMI electrochemical biosensor is obtained after the elution of the SARS-CoV-2 S protein template with an acidic solution by the dissociation of the boronate ester bonds, which can be utilized for sensitive detection of the SARS-CoV-2 S protein. The developed SMI electrochemical biosensor displays high specificity, reproducibility and stability, which might be a potential and promising candidate for the clinical diagnosis of COVID-19.

Probing Protein 4'-Phosphopantetheinylation in Single Living Cells

4'-Phosphopantetheinylation (4PPTylation) of proteins, which is derived from the hydrolysis of coenzyme A (CoA), is an essential post-translational modification participating in biosynthetic and metabolic pathways. However, due to the lack of specific recognition ligands as well as the shortage of sensitive analytical tools for single-cell analysis, the in-depth exploration of new cellular functions and mechanisms of protein 4PPTylation has been much hampered. In this study, we rationally engineered CoA-imprinted Raman nanotags for the specific recognition of 4PPTylation and thereby developed a molecularly imprinted polymer (MIP)-based plasmonic immunosandwich assay (PISA) for facile probing the 4PPTylation of ALDH1L1 in single cells. The molecularly imprinted nanotags exhibited excellent binding properties, giving a dissociation constant of 10^-6 M and cross-reactivity values of less than 10%. The MIP-based PISA enabled the specific and sensitive detection of the level of 4PPTylated ALDH1L1 in single living cells. Particularly, monitoring of the fluctuation of 4PPTylated ALDH1L1 in single cells under simulation by an inhibitor (methotrexate) that acts on a different metabolism pathway was achieved, implying possible crosstalk between two different pathways in folate metabolism. Thus, the imprinted Raman nanotags-PISA provides a promising analytical tool with a single-cell resolution for exploring new functions and elucidating their mechanisms of protein 4PPTylation.

Molecularly imprinted and cladded polymers for constructing a portable plasmonic immunoassay for peptides in biofluids

Using two molecularly imprinted and cladded polymers (cMIPs), an inexpensive, fast and portable plasmonic immuno-sandwich assay (PISA) was rationally developed for high-specificity and ultra-sensitive detection of C-peptide in urine. The dual cMIPs-based PISA allowed healthy individuals to be distinguished from diabetes patients and exhibited several significant merits over existing immunoassays, holding great promise in clinical diagnosis.

Molecularly Imprinted Polymers as Synthetic Antibodies for Protein Recognition: The Next Generation

Molecularly imprinted polymers (MIPs) are chemical antibody mimics obtained by nanomoulding the 3D shape and chemical functionalities of a desired target in a synthetic polymer. Consequently, they possess exquisite molecular recognition cavities for binding the target molecule, often with specificity and affinity similar to those of antigen-antibody interactions. Research on MIPs targeting proteins began in the mid-90s, and this review will evaluate the progress made till now, starting from their synthesis in a monolith bulk format through surface imprinting to biocompatible soluble nanogels prepared by solid-phase synthesis. MIPs in the latter format will be discussed more in detail because of their tremendous potential of replacing antibodies in the biomedical domain like in diagnostics and therapeutics, where the workforce of antibodies is concentrated. Emphasis is also put on the development of epitope imprinting, which consists of imprinting a short surface-exposed fragment of a protein, resulting in MIPs capable of selectively recognizing the whole macromolecule, amidst others in complex biological media, on cells or tissues. Thus selecting the 'best' peptide antigen is crucial and in this context a rational approach, inspired from that used to predict peptide immunogens for peptide antibodies, is described for its unambiguous identification.

Functional thiolactone assisted imprinting cavities with abundant amines for strong binding of protein imprinted nanospheres

In order to develop new protein imprinting polymerization methods and to prepare protein imprinted nanomaterials with high recognition, a novel protein imprinted strategy is developed in this study by using polyethyleneimine (PEI) for aminolysis of tailor-made thiolactone-based functional monomers and crosslinkers on amine-modified magnetic nanospheres in an aqueous medium. The prepared protein imprinted nanospheres can seize BSA templates in the imprinting polymerization process through multiple hydrogen bonds, and hydrophobic and electrostatic interactions. In addition, the aminolysis reaction also generates abundant amide bonds in the imprinting polymer network, which not only enhances the hydrogen bonding interactions between the imprinted nanospheres and BSA but also improves the stability of the imprinting cavities by increasing the rigidity of the polymer chains. Based on the above advantages, the protein imprinted nanospheres show excellent rebinding specificity for BSA, for which the rebinding capacity is up to 505 ± 15 mg g^-1 and the imprinting factor is 4.09. The protein imprinted nanospheres exhibit fast adsorption kinetics, outstanding reusability, and can selectively separate BSA from a protein mixture and actual biological samples. The generality of this imprinted method is also verified. Thus, this study will provide a new idea for the design of protein imprinted materials with high recognition.

Molecularly Imprinted Nanomaterials with Stimuli Responsiveness for Applications in Biomedicine

The review aims to summarize recent reports of stimuli-responsive nanomaterials based on molecularly imprinted polymers (MIPs) and discuss their applications in biomedicine. In the past few decades, MIPs have been proven to show widespread applications as new molecular recognition materials. The development of stimuli-responsive nanomaterials has successfully endowed MIPs with not only affinity properties comparable to those of natural antibodies but also the ability to respond to external stimuli (stimuli-responsive MIPs). In this review, we will discuss the synthesis of MIPs, the classification of stimuli-responsive MIP nanomaterials (MIP-NMs), their dynamic mechanisms, and their applications in biomedicine, including bioanalysis and diagnosis, biological imaging, drug delivery, disease intervention, and others. This review mainly focuses on studies of smart MIP-NMs with biomedical perspectives after 2015. We believe that this review will be helpful for the further exploration of stimuli-responsive MIP-NMs and contribute to expanding their practical applications especially in biomedicine in the near future.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2017-2018

This review is the tenth update of the original article published in 1999 on the application of matrix-assisted laser desorption/ionization mass spectrometry (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2018. Also included are papers that describe methods appropriate to glycan and glycoprotein analysis by MALDI, such as sample preparation techniques, even though the ionization method is not MALDI. Topics covered in the first part of the review include general aspects such as theory of the MALDI process, new methods, matrices, derivatization, MALDI imaging, fragmentation and the use of arrays. The second part of the review is devoted to applications to various structural types such as oligo- and poly-saccharides, glycoproteins, glycolipids, glycosides, and biopharmaceuticals. Most of the applications are presented in tabular form. The third part of the review covers medical and industrial applications of the technique, studies of enzyme reactions, and applications to chemical synthesis. The reported work shows increasing use of combined new techniques such as ion mobility and highlights the impact that MALDI imaging is having across a range of diciplines. MALDI is still an ideal technique for carbohydrate analysis and advancements in the technique and the range of applications continue steady progress.

Rational Development of Hypervalent Glycan Shield-Binding Nanoparticles with Broad-Spectrum Inhibition against Fatal Viruses Including SARS-CoV-2 Variants

Infectious virus diseases, particularly coronavirus disease 2019, have posed a severe threat to public health, whereas the developed therapeutic and prophylactic strategies are seriously challenged by viral evolution and mutation. Therefore, broad-spectrum inhibitors of viruses are highly demanded. Herein, an unprecedented antiviral strategy is reported, targeting the viral glycan shields with hypervalent mannose-binding nanoparticles. The nanoparticles exhibit a unique double-punch mechanism, being capable of not only blocking the virus-receptor interaction but also inducing viral aggregation, thereby allowing for inhibiting the virus entry and facilitating the phagocytosis of viruses. The nanoparticles exhibit potent and broad-spectrum antiviral efficacy to multiple pseudoviruses, including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its major variants (D614G, N501Y, N439K, Δ69-70, Delta, and Omicron; lentiviruses expressing only the spike proteins), as well as other vital viruses (human immunodeficiency virus 1 and Lassa virus), with apparent EC50 values around the 10^-9  m level. Significantly, the broad-spectrum inhibition of authentic viruses of both wild-type SARS-CoV-2 and Delta variants is confirmed. Therefore, this hypervalent glycan-shield targeting strategy opens new access to broad-spectrum viral inhibition.

Preparation and properties of boron affinity molecularly imprinted mesoporous polymers based on Mn-doped ZnS quantum dots

Sialic acid (SA), known as N-acetyl neuraminic acid, is a natural 9-carbomonosaccharide derivative. SA has been widely applied in the early diagnosis of diseases as therapeutic target. However, the abundance of SA is very low in biological samples, which is usually interfered by the similar molecules coexisting at high abundance. Combining the advantages of high selectivity and specificity of molecularly imprinted technology, high specific surface area of mesoporous materials and excellent optical properties of quantum dots, we chose Mn-doped ZnS quantum dots as signal elements, and sialic acid as the template molecule. KH-4-MAPB with recognition ability to SA was synthesized by one-step hydrothermal method using thiolene click reaction as functional monomer. Based on the principle of boron affinity, molecularly imprinted polymers with highly ordered mesoporous structure were prepared, and the structure and fluorescence properties of fluorescent molecularly imprinted polymers were studied. FT-IR, XRD, TEM and nitrogen adsorption-desorption experiments were used to characterize the structure and morphology of the molecularly imprinted polymers. The results showed that the prepared molecularly imprinted polymers had highly ordered mesoporous structure and a large number of imprinted holes, which ensured the specific selectivity of the molecularly imprinted polymers. The fluorescence properties of MIMPs were characterized and analyzed by fluorescence spectra, equilibrium adsorption kinetics experiments were conducted and imprinting properties were recorded under different pH. The above experimental results showed that the fluorescence quenching was successfully achieved when the template molecule SA was captured by the molecularly imprinted polymer. When the concentration of SA was 1.25-100 × 10^-2 g/L, the fluorescence quenching degree of MIMPs showed a fine linear relationship with SA. The correlation coefficient was 0.9946, and the detection equation was F₀/F - 1 = 0.0215 [CSA] + 0.0241. MIMPs had a high recognition ability for SA, and the imprinting factor was 2.44. As a fluorescent sensor for SA, the response time of MIMPs was 20 min. When the buffer solution pH was 7, the imprinting factor was the largest. Under the best conditions, MIMPs revealed good selectivity and specificity for the fluorescence recognition of SA. MIMPS were also applied to the analysis of SA in real human serum samples with satisfactory results.

Rapid Measurement of Residual Kanamycin Using Highly Specific Biomimetic Recognition Paper-Based Chip

The development of highly specific biomimetic recognition material is a challenge for rapid detection of harmful residues in foodstuff. In this study, a paper-based boronate affinity metal-organic framework/molecularly imprinted polymer microfluidic chip (FZS-BA@MIP) was constructed based on the in situ construction strategy, which was also designed as a highly specific biomimetic recognition module. Here, the homogeneous zeolitic imidazole framework-8 (ZIF-8) membrane served as a great scaffold and enrichment layer. Besides, the recognition layer of MIP was prepared based on a highly oriented boronate affinity surface imprinting strategy. With the aid of the liquid flow channel, the highly specific enrichment and visual detection for antibiotic residues like kanamycin in actual products were achieved on the paper chip module of an integrated lateral flow platform. The whole analysis process could be accomplished within 30 min. In brief, this study offered a new integrated biomimetic recognition platform for visually detecting harmful veterinary residues containing cis-diols, which demonstrated promising commercial value in point-of-care testing of foodborne hazardous compounds.

pH-Responsive epitope-imprinted magnetic nanoparticles for selective separation and extraction of chlorogenic acid and caffeic acid in traditional Chinese medicines

Chlorogenic acid and caffeic acid often coexist in traditional Chinese medicines (TCMs) and play roles as antioxidation, antiviral, antitumor and anti-inflammatory agents. Due to their low content and the presence of structural analogues, they cannot be effectively separated by conventional extraction methods. Molecularly imprinted polymers, as synthesized receptors with antibody-like binding properties, have significant advantages in separating structural analogues. However, the harsh imprinting conditions easily induced the degradation of chlorogenic acid. Therefore, caffeic acid was used as an epitope template to replace chlorogenic acid for imprinting. Boronic acid-functionalized magnetic nanoparticles (MNPs) were selected as substrates, which could not only facilitate the immobilization and removal of the templates by pH regulation, but also achieve rapid separation under an external magnetic field. Tetraethyl orthosilicate was selected as an imprinting monomer which allowed for precise control of the thickness of the imprinting layer by adjusting the imprinting time. The prepared epitope-imprinted MNPs showed excellent specificity, in combination with high performance liquid chromatography, have been successfully applied to the selective separation and detection of chlorogenic acid and caffeic acid in TCMs.

Ring -opening of polythiolactones to construct protein-imprinted nanospheres with high recognition and regulation capabilities

Developing and preparing novel protein-imprinted nanomaterials with high recognition ability remains challenging because it is difficult to controllably and orderly design and arrange functional groups on the imprinted polymer layers of protein-imprinted nanomaterials to improve their protein identification. Herein, we present a new technology using rationally designed polythiolactone-decorated magnetic nanospheres as the precursor of multifunctionalized imprinted materials. Moreover, the strategy of ring-opening the polythiolactione layers using primary amines with terminal alcohols, acids and pyrrolidines introduces abundant recognition sites, which enhance the recognition for template proteins through multiple hydrogen-bonding and hydrophobic interactions. Thiols generated in situ by the ring-opening reaction provide sufficient crosslinking sites proximate to each recognition site for the formation of imprinting cavities, endowing the imprinted nanospheres with promising regulation capabilities. Based on the rational design, the imprinted nanospheres can be prepared conveniently and present tunable rebinding capacity and specificity for bovine serum albumin (BSA). The maximum saturated rebinding capacity of imprinted materials for BSA is up to 285 ± 15 mg g^-1 and the highest imprinting factor reaches 5.79. The simple and versatile strategy demonstrated in this study shows promise for the design of other protein-imprinted materials with high recognition ability.

Photothermal Therapy of Neuroblastoma via Polysialic Acid-Targeting Nanomissiles

Exploring new targets and developing novel targeted therapies are urgently needed for neuroblastoma therapy. Polysialic acid (polySia), a linear homopolymer of sialic acid units that correlates well with tumor progression and poor prognosis, has emerged as a potential target for neuroblastoma. However, the lack of polySia-specific binding reagents has severely limited the development of polySia-targeting therapeutics for neuroblastoma. Herein, the construction of polySia-targeting nanomissiles via molecular imprinting for the photothermal therapy of neuroblastoma is reported. Oligosialic acid (oligoSia) containing 3-4 units is considered as a characteristic structure for the recognition of polySia, while oligoSia containing 4-7 units digested from polySia is employed as the template. Via boronate-affinity controllable oriented surface imprinting, oligoSia-imprinted nanoparticles (oSia-MIP) are prepared. The oSia-MIP allows for specifically recognizing polySia and targeting polySia overexpressed neuroblastoma cells in vitro and in vivo. oSia-MIP loaded with indocyanine green is prepared and experimentally demonstrated to be a potent targeted photothermal therapeutic for neuroblastoma. Equipping the core substrate with functional entities, the developed polySia targeting nanoplatform can be accommodated to various therapeutic modalities, holding great promise for neuroblastoma targeted therapy.

Fabrication of efficient protein imprinted materials based on pearl necklace-like MOFs bacterial cellulose composites

The acquisition of efficient protein isolation substances is vital for proteomic research, whereas it's still challenging nowadays. Herein, an elaborately designed protein imprinted material based on a bacterial cellulose@ZIF-67 composite carrier (BC@ZIF-67) is proposed for the first time. In particular, due to the ultrafine fiber diameter and abundant hydroxyl functional groups of the bacterial cellulose, BC@ZIF-67 presented a compact arrangement structure similar to a pearl necklace, which greatly promoted template immobilization and mass transfer resistance in protein imprinting technology. Therefore, the protein-imprinted material (BC@ZIF-67@MIPs) fabricated by surface imprinting technology and template immobilization strategy could exhibit ultrahigh adsorption capacity (1017.0 mg g^-1), excellent recognition (IF = 5.98) and rapid adsorption equilibrium time (50 min). In addition, based on the experiment outcomes, our team employed BC@ZIF-67@MIPs to enrich template protein in blended protein solutions and biosamples, identifying them as underlying candidates for isolating and purifying proteins.

Isolation of Phenolic Compounds from Raspberry Based on Molecular Imprinting Techniques and Investigation of Their Anti-Alzheimer's Disease Properties

Alzheimer's disease is the most common neurodegenerative disease, characterized by memory loss and cognitive dysfunction. Raspberry fruits contain polyphenols which have antioxidant and anti-inflammatory properties. In this study, we used molecular imprinting technology to efficiently isolate phenolic components from the raspberry ethyl acetate extracts. Six phenolic components (ellagic acid, tiliroside, kaempferol-3-o-rutoside, gallic acid, ferulic acid and vanillic acid) were identified by UPLC-Q-TOF-MS analysis. Molecular docking was used to predict the anti-inflammatory effects and anti-Alzheimer's potential of these isolated compounds, which showed a good binding ability to diseases and related proteins. However, the binding energy and docking fraction of ellagic acid, tiliroside, and kaempferol-3-o-rutoside were better than those of gallic acid, ferulic acid and vanillic acid. Additionally, by studying the effects of these six phenolic components on the LPS-induced secretion of inflammatory mediators in murine microglial (BV2) cells, it was further demonstrated that they were all capable of inhibiting the secretion of NO, IL-6, TNF-α, and IL-1β to a certain extent. However, ellagic acid, tiliroside, and kaempferol-3-o-rutoside have better inhibitory effects compared to others. The results obtained suggest that the phenolic components extracted from ethyl acetate extracts of raspberry by molecularly imprinted polymers have the potential to inhibit the progression of Alzheimer's disease.

Boosting Chemodynamic Therapy by Tumor-Targeting and Cellular Redox Homeostasis-Disrupting Nanoparticles

Chemodynamic therapy (CDT) that kills tumor cells by converting low-reactivity H₂O₂ into highly toxic hydroxyl radicals (•OH) is an emerging tumor therapeutic modality, but its therapeutic efficacy is largely limited by both the lack of tumor targeting and redox homeostasis in tumor cells. Herein, we report Cu²⁺-encapsulated and GalNAc-imprinted biodegradable silica nanoparticles (nanoMIP) for boosting CDT. In this strategy, the Cu²⁺ was first encapsulated into disulfide-bridged silica nanoparticles with a high loading capacity of ∼18.3%, followed by in situ functionalization via molecular imprinting using GalNAc as a template. Such a nanovector could specifically target tumor cells overexpressing the Tn antigen to promote the cellular uptake. After internalization into tumor cells, the degradation of nanoMIP occurred in response to the tumor microenvironment, spontaneously releasing Cu²⁺/Cu⁺ via redox cycles, which in turn promoted highly potent GSH depletion and triggered •OH generation by a Fenton-like reaction. Notably, we found that the catalase activity could be effectively inhibited by the produced Cu⁺, which indirectly upregulated the endogenous H₂O₂ level. As a result, the "maladjusted" tumor cells lost the resistance against •OH damage, finally resulting in the apoptosis of tumor cells. In vitro and in vivo experiments demonstrated that our nanoMIP exhibited excellent cytotoxicity against tumor cells and high efficacy of tumor inhibition in the xenograft tumor model with negligible side effects. Taken together, our study provides not only a promising strategy for maximizing the CDT efficacy but also a new insight for developing MIP-based nanomedicine.

Greenificated Molecularly Imprinted Materials for Advanced Applications

Molecular imprinting technology (MIT) produces artificial binding sites with precise complementarity to substrates and thereby is capable of exquisite molecular recognition. Over five decades of evolution, it is predicted that the resulting host imprinted materials will overtake natural receptors for research and application purposes, but in practice, this has not yet been realized due to the unsustainability of their life cycles (i.e., precursors, creation, use, recycling, and end-of-life). To address this issue, greenificated molecularly imprinted polymers (GMIPs) are a new class of plastic antibodies that have approached sustainability by following one or more of the greenification principles, while also demonstrating more far-reaching applications compared to their natural counterparts. In this review, the most recent developments in the delicate design and advanced application of GMIPs in six fast-growing and emerging fields are surveyed, namely biomedicine/therapy, catalysis, energy harvesting/storage, nanoparticle detection, gas sensing/adsorption, and environmental remediation. In addition, their distinct features are highlighted, and the optimal means to utilize these features for attaining incredibly far-reaching applications are discussed. Importantly, the obscure technical challenges of the greenificated MIT are revealed, and conceivable solutions are offered. Lastly, several perspectives on future research directions are proposed.