Strain-controlled shell morphology on quantum rods

Colossal Core/Shell CdSe/CdS Quantum Dot Emitters

Single-photon sources are essential for advancing quantum technologies with scalable integration being a crucial requirement. To date, deterministic positioning of single-photon sources in large-scale photonic structures remains a challenge. In this context, colloidal quantum dots (QDs), particularly core/shell configurations, are attractive due to their solution processability. However, traditional QDs are typically small, about 3 to 6 nm, which restricts their deterministic placement and utility in large-scale photonic devices, particularly within optical cavities. The largest existing core/shell QDs are a family of giant CdSe/CdS QDs, with total diameters ranging from about 20 to 50 nm. Pushing beyond this size limit, we introduce a synthesis strategy for colossal CdSe/CdS QDs, with sizes ranging from 30 to 100 nm, using a stepwise high-temperature continuous injection method. Electron microscopy reveals a consistent hexagonal diamond morphology composed of 12 semipolar {101̅1} facets and one polar (0001) facet. We also identify conditions where shell growth is disrupted, leading to defects, islands, and mechanical instability, which suggest synthetic requirements for growing crystalline particles beyond 100 nm. The stepwise growth of thick CdS shells on CdSe cores enables the synthesis of emissive QDs with long photoluminescence lifetimes of a few microseconds and suppressed blinking at room temperature. Notably, QDs with 80 and 100 CdS monolayers exhibit high single-photon emission purity with second-order photon correlation g(2)(0) values below 0.2.

Organic Synaptic Transistors with Environmentally Friendly Core/Shell Quantum Dots for Wavelength-Selective Memory and Neuromorphic Functions

Organic transistors based on organic semiconductors together with quantum dots (QDs) are attracting more and more interest because both materials have excellent optoelectronic properties and solution processability. Electronics based on nontoxic QDs are highly desired considering the potential health risks but are limited by elevated surface defects, inadequate stability, and diminished luminescent efficiency. Herein, organic synaptic transistors based on environmentally friendly ZnSe/ZnS core/shell QDs with passivating surface defects are developed, exhibiting optically programmable and electrically erasable characteristics. The synaptic transistors feature linear multibit storage capability and wavelength-selective memory function with a retention time above 6000 s. Various neuromorphic applications, including memory enhancement, optical communication, and memory consolidation behaviors, are simulated. Utilizing an established neuromorphic model, accuracies of 92% and 91% are achieved in pattern recognition and complicated electrocardiogram signal processing, respectively. This research highlights the potential of environmentally friendly QDs in neuromorphic applications and health monitoring.

The Strain Effects and Interfacial Defects of Large ZnSe/ZnS Core/Shell Nanocrystals

The shell growth of large ZnSe/ZnS nanocrystals( is of great importance in the pursuit of pure-blue emitters for display applications, however, suffers from the challenges of spectral blue-shifts and reduced photoluminescence quantum yields. In this work, the ZnS shell growth on different-sized ZnSe cores is investigated. By controlling the reactivity of Zn and S precursors, the ZnS shell growth can be tuned from defect-related strain-released to defect-free strained mode, corresponding to the blue- and red-shifts of resultant nanocrystals respectively. The shape of strain-released ZnSe/ZnS nanocrystals can be kept nearly spherical during the shell growth, while the shape of strained nanocrystals evolutes from spherical into island-like after the critical thickness. Furthermore, the strain between ZnSe core and ZnS shell can convert the band alignment from type-I into type-II core/shell structure, resulting in red-shifts and improved quantum yield. By correlating the strain effects with interfacial defects, a strain-released shell growth model is proposed to obtain large ZnSe/ZnS nanocrystals with isotropic shell morphology.

Enhancing Circularly Polarized Luminescence in Quantum Dots through Chiral Coordination-Mediated Growth at the Liquid/Liquid Interface

Here, we develop a novel methodology for synthesizing chiral CdSe@ZnS quantum dots (QDs) with enhanced circularly polarized luminescence (CPL) by incorporating l-/d-histidine (l-/d-His) ligands during ZnS shell growth at the water/oil interface. The resulting chiral QDs exhibit exceptional absolute photoluminescence quantum yield of up to 67.2%, surpassing the reported limits of 40.0% for chiral inorganic QDs, along with absorption dissymmetry factor (|gabs|) and luminescence dissymmetry factor (|glum|) values of 10-2, exceeding the range of 10-5-10-3 and 10-4-10-2, respectively. Detailed investigations of the synthetic pathway reveal that the interface, as a binary synthetic environment, facilitates the coordinated ligand exchange and shell growth mediated by chiral His-Zn2+ coordination complexes, leading to a maximum fluorescent brightness and chiroptical activities. The growth process, regulated by the His-Zn2+ coordination complex, not only reduces trap states on the CdSe surface, thereby enhancing the fluorescence intensity, but also significantly promotes the orbital hybridization between QDs and chiral ligands, effectively overcoming the shielding effect of the wide bandgap shell and imparting pronounced chirality. The proposed growth pathway elucidates the origin of chirality and provides insights into the regulation of the CPL intensity in chiral QDs. Furthermore, the application of CPL QDs in multilevel anticounterfeiting systems overcomes the limitations of replication in achiral fluorescence materials and enhances the system's resistance to counterfeiting, thus opening new opportunities for chiral QDs in optical anticounterfeiting and intelligent information encryption.

Determination of hyper-parameters in the atomic descriptors for efficient and robust molecular dynamics simulations with machine learning forces

The atomic descriptors used in machine learning to predict forces are often high dimensional. In general, by retrieving a significant amount of structural information from these descriptors, accurate force predictions can be achieved. On the other hand, to acquire higher robustness for transferability without overfitting, sufficient reduction of descriptors should be necessary. In this study, we propose a method to automatically determine hyperparameters in the atomic descriptors, aiming to obtain accurate machine learning forces while using a small number of descriptors. Our method focuses on identifying an appropriate threshold cut-off for the variance value of the descriptor components. To demonstrate the effectiveness of our method, we apply it to crystalline, liquid, and amorphous structures in SiO₂, SiGe, and Si systems. By using both conventional two-body descriptors and our introduced split-type three-body descriptors, we demonstrate that our method can provide machine learning forces that enable efficient and robust molecular dynamics simulations.

Anisotropic Heavy-Metal-Free Semiconductor Nanocrystals: Synthesis, Properties, and Applications

Heavy-metal (Cd, Hg, and Pb)-containing semiconductor nanocrystals (NCs) have been explored widely due to their unique optical and electrical properties. However, the toxicity risks of heavy metals can be a drawback of heavy-metal-containing NCs in some applications. Anisotropic heavy-metal-free semiconductor NCs are desirable replacements and can be realized following the establishment of anisotropic growth mechanisms. These anisotropic heavy-metal-free semiconductor NCs can possess lower toxicity risks, while still exhibiting unique optical and electrical properties originating from both the morphological and compositional anisotropy. As a result, they are promising light-emitting materials in use various applications. In this review, we provide an overview on the syntheses, properties, and applications of anisotropic heavy-metal-free semiconductor NCs. In the first section, we discuss hazards of heavy metals and introduce the typical heavy-metal-containing and heavy-metal-free NCs. In the next section, we discuss anisotropic growth mechanisms, including solution-liquid-solid (SLS), oriented attachment, ripening, templated-assisted growth, and others. We discuss mechanisms leading both to morphological anisotropy and to compositional anisotropy. Examples of morphological anisotropy include growth of nanorods (NRs)/nanowires (NWs), nanotubes, nanoplatelets (NPLs)/nanosheets, nanocubes, and branched structures. Examples of compositional anisotropy, including heterostructures and core/shell structures, are summarized. Third, we provide insights into the properties of anisotropic heavy-metal-free NCs including optical polarization, fast electron transfer, localized surface plasmon resonances (LSPR), and so on, which originate from the NCs' anisotropic morphologies and compositions. Finally, we summarize some applications of anisotropic heavy-metal-free NCs including catalysis, solar cells, photodetectors, lighting-emitting diodes (LEDs), and biological applications. Despite the huge progress on the syntheses and applications of anisotropic heavy-metal-free NCs, some issues still exist in the novel anisotropic heavy-metal-free NCs and the corresponding energy conversion applications. Therefore, we also discuss the challenges of this field and provide possible solutions to tackle these challenges in the future.

Tensile-Strained Platinum-Cobalt Alloy Surface on Palladium Octahedra as a Highly Durable Oxygen Reduction Catalyst

Designing shape-controlled Pt-based core-shell nanocrystals is a prospective strategy to maximize the utilization of Pt while maintaining high activity for oxygen reduction reaction (ORR). However, the core-shell structures with ultrathin Pt shell exhibit limited electrochemical durability. Therefore, a thicker shell is proposed to successfully improve the durability of the core-shell structures by preventing the core from dissolution. Nevertheless, the deposition of Pt tends to switch to the Stranski-Krastanov (S-K) growth mode with the increase of the number of layer, resulting in the absence of a conformal morphology. Herein, we realize the deposition of three-to-five-layer epitaxial Pt-Co layers on Pd octahedral seeds by introducing tensile strain in the epitaxial layer to impede the S-K growth. The as-obtained Pd@Pt-Co octahedra with four layers exhibit enhanced mass activity (0.69 A/mg_Pt) and specific activity (1.00 mA/cm²) for ORR, which are 4.93 and 5 times that of the commercial Pt/C, respectively. Furthermore, it shows only 17% decay for specific activity after a 30,000-cycle durability test. This work is expected to enlighten the design and synthesis of related core-shell nanocrystals with facetted multicomponent shells, offering a promising strategy for designing cost-effective and efficient catalysts.

Design Principles of Colloidal Nanorod Heterostructures

Anisotropic heterostructures of colloidal nanocrystals embed size-, shape-, and composition-dependent electronic structure within variable three-dimensional morphology, enabling intricate design of solution-processable materials with high performance and programmable functionality. The key to designing and synthesizing such complex materials lies in understanding the fundamental thermodynamic and kinetic factors that govern nanocrystal growth. In this review, nanorod heterostructures, the simplest of anisotropic nanocrystal heterostructures, are discussed with respect to their growth mechanisms. The effects of crystal structure, surface faceting/energies, lattice strain, ligand sterics, precursor reactivity, and reaction temperature on the growth of nanorod heterostructures through heteroepitaxy and cation exchange reactions are explored with currently known examples. Understanding the role of various thermodynamic and kinetic parameters enables the controlled synthesis of complex nanorod heterostructures that can exhibit unique tailored properties. Selected application prospects arising from such capabilities are then discussed.

Chiral FA Conjugated CdTe/CdS Quantum Dots for Selective Cancer Ablation

Inducing apoptosis in cancer cells is considered a potential therapeutic mechanism underlying cancers. Here, chiral folic acid (FA) conjugated Cys-CdTe/CdS quantum dots (QDs) conjugated with a cancer-targeting ligand were fabricated to induce apoptosis in vivo. Ligand-induced chirality mechanism for FA-Cys-CdTe/CdS QDs was discussed, which is verified by density functional theory (DFT) simulation. Interestingly, we found that the circular dichroism (CD) signals of chiral QDs can effectively distinguish breast cancer cells from normal cells, where a sharp decrease in CD signal and absorption intensity can be seen. Notably, chiral FA-Cys-CdTe/CdS QDs showed significant apoptosis-inducing ability after the release of mitochondrial apoptotic factors. Furthermore, in vivo experiments showed that chiral FA-Cys-CdTe/CdS QDs provide an efficient cancer ablation through the apoptosis process with negligible toxicity, demonstrating their great potential utility in targeted anticancer agent for future clinic application.

Increased TRIM31 gene expression is positively correlated with SARS-CoV-2 associated genes TMPRSS2 and TMPRSS4 in gastrointestinal cancers

Besides typical respiratory symptoms, COVID-19 patients also have gastrointestinal symptoms. Studies focusing on the gastrointestinal tumors derived from gastrointestinal tissues have raised a question whether these tumors might express higher levels of SARS-CoV-2 associated genes and therefore patients diagnosed with GI cancers may be more susceptible to the infection. In this study, we have analyzed the expression of SARS-CoV-2 associated genes and their co-expressions in gastrointestinal solid tumors, cancer cell lines and patient-derived organoids relative to their normal counterparts. Moreover, we have found increased co-expression of TMPRSS2-TMPRSS4 in gastrointestinal cancers suggesting that SARS-CoV-2 viral infection known to be mediated by this protease pair might facilitate the effects of viral infection in GI cancer patients. Further, our findings also demonstrate that TRIM31 expression is upregulated in gastrointestinal tumors, while the inhibition of TRIM31 significantly altered viral replication and viral processes associated with cellular pathways in gastrointestinal cancer samples. Taken together, these findings indicate that in addition to the co-expression of TMPRSS2-TMPRSS4 protease pair in GI cancers, TRIM31 expression is positively correlated with this pair and TRIM31 may play a role in providing an increased susceptibility in GI cancer patients to be infected with SARS-CoV-2 virus.

Coherent InP/ZnS core@shell quantum dots with narrow-band green emissions

We report, for the first time, that the coherent growth of zinc sulfide (ZnS) on a colloidal indium phosphide (InP) quantum dot (QD) yields a InP/ZnS core/shell structure with a single lattice constant of 0.563 nm. Compared to the bulk crystal of zinc-blend (cubic) InP, the lattice of the core QD is compressed by 4.1%. In contrast, the lattice of the shell expands by 4.1% relative to the bulky ZnS crystal throughout the core/shell QD if the shell is thinner than or equal to 0.81 nm and the diameter of the core QD is smaller than 2.64 nm. Under these conditions, the bandgap of the core QD increases, resulting in a blueshift of absorption and photoluminescence (PL) spectra. The PL peak is centered at 523 nm. Furthermore, the PL quantum yield is enhanced up to 70% and the PL bandwidth narrows to 36 nm based on the strengthened quantum confinement effect. The temperature dependence of the PL properties is investigated to discuss the effect of the core/shell lattice coherency on the improved PL performances.

Strain Engineering: A Boosting Strategy for Photocatalysis

Whilst the photocatalytic technique is considered to be one of the most significant routes to address the energy crisis and global environmental challenges, the solar-to-chemical conversion efficiency is still far from satisfying practical industrial requirements, which can be traced to the suboptimal bandgap and electronic structure of photocatalysts. Strain engineering is a universal scheme that can finely tailor the bandgap and electronic structure of materials, hence supplying a novel avenue to boost their photocatalytic performance. Accordingly, to explore promising directions for certain breakthroughs in strained photocatalysts, an overview on the recent advances of strain engineering from the basics of strain effect, creations of strained materials, as well as characterizations and simulations of strain level is provided. Besides, the potential applications of strain engineering in photocatalysis are summarized, and a vision for the future controllable-electronic-structure photocatalysts by strain engineering is also given. Finally, perspectives on the challenges for future strain-promoted photocatalysis are discussed, placing emphasis on the creation and decoupling of strain effect, and the modification of theoretical frameworks.

Authentic Intelligent Machine for Scaling Driven Discovery: A Case for Chiral Quantum Dots

The scaling laws have long been used as evidence of science where many fundamental physics laws emerge. As emerging nanomaterials, quantum dots are also sensitive to scaling because of their strong size effect. In this work, we developed the chiral dielectric theory based on the exciton absorption mechanism to explain the increment of the dielectric constant from chirality via its dimensionality. To help researchers discover and develop scaling relevant theories, the Authentic Intelligent Machine (AIM) protocol was developed to generate and interpret experimental data in an analytical and scaling-oriented manner. We show how the AIM protocol interprets spectra such as transient absorption data of chiral quantum dots with theories, where discrepancies concerning the dielectric constant were discovered. Examples for applying the AIM protocol on other spectra, such as absorption spectra and photoluminescence spectra, are also given.

Investigation of electrochemistry and electrochromic performance of metallopolymer formed by electropolymerization of Fe(II) complex with triphenylamine-hydrazone ligand

The complex of Fe(II) ions of general formula [FeL2](BF4)2 with triphenylamine-hydrazone ligand L has been synthesized and characterized. Oxidative electropolymerization of the complex proceeded smoothly on the working electrode producing homogenous thin film of metallopolymer. The film thickness and morphology of the layer was investigated by microscopy techniques such as SEM and AFM, and the composition of the film was confirmed by XPS analysis. It was found that after fifty successive oxidation/reduction cycles the film of thickness 120 nm was formed on the electrode surface. The metallopolymer was also characterized using cyclic voltammetry and spectroelectrochemical methods. The film was found to change its color from yellow to green-blue, high change in transmittance of 60% at 770 nm and good electrochemical stability during 375 cycles of switching of the potential between -0.1 V and +1.5 V, due to the presence of metal ions that link two ligand molecules resulting in formation of highly cross-linked film. The switching times (coloration and bleaching) were calculated to be 34.2 s and 7.3 s, respectively. Coloration efficiency of the formed film of polymeric complex was found to be 144 cm 2 /C.

Multi-stimuli programmable FRET based RGB absorbing antennae towards ratiometric temperature, pH and multiple metal ion sensing

A red-green-blue (RGB) multichromophoric antenna 1 consisting of energy donors naphthalimides and perylenediimides and a central aza-BODIPY energy acceptor along with two subchromophoric red-blue (RB 6) and green-blue (GB 12) antennae was designed that showed efficient cascade Förster resonance energy transfer (FRET). RGB antenna 1 showed pronounced temperature-dependent emission behaviour where emission intensities in green and red channels could be tuned in opposite directions by temperature giving rise to unique ratiometric sensing with a temperature sensitivity of 0.4% °C. RGB antenna 1 showed reversible absorption modulation selectively in the blue region (RGB ↔ RG) upon acid/base addition giving rise to pH sensing behaviour. Furthermore, RGB antenna 1 was utilized to selectively sense metal ions such as Co2+ and Fe3+ through a FRET turn-off mechanism induced by a redox process at the aza-BODIPY site that resulted in the selective spectral modulation of the red band (i.e., RGB → GB). Model antenna RB 6 showed white light emission with chromaticity coordinates (0.32, 0.33) on acid addition. Antennae 1, 6 and 12 also exhibited solution state electrochromic switching characterized by distinct colour changes upon changing the potential. Finally, antennae 1, 6 and 12 served as reversible fluorescent inks in PMMA/antenna blends whereby the emission colours could be switched or tuned using different stimuli such as acid vapour, temperature and metal ions.

Bulk-like ZnSe Quantum Dots Enabling Efficient Ultranarrow Blue Light-Emitting Diodes

Blue-emitting heavy-metal free QDs simultaneously exhibiting photoluminescence quantum yield close to unity and narrow emission line widths are essential for next-generation electroluminescence displays, yet their synthesis is highly challenging. Herein, we develop the synthesis of blue-emitting QDs by growing a thin shell of ZnS on ZnSe cores with their size larger than bulk Bohr diameter. The bulk-like size of ZnSe cores enables the emission to locate in the blue region with a narrow emission width close to its intrinsic peak width. The obtained bulk-like ZnSe/ZnS core/shell QDs display high quantum yield of 95% and extremely narrow emission width of ∼9.6 nm. Moreover, the bulk-like size of ZnSe cores reduces the energy level difference between QDs and adjacent layers in LEDs and improves charge transport. The LEDs fabricated with these high-quality QDs show bright pure blue emission with an external quantum efficiency of 12.2% and a relatively long operating lifetime.

Ambipolar Charge Storage in Type-I Core/Shell Semiconductor Quantum Dots toward Optoelectronic Transistor-Based Memories

Efficient charge storage media play a pivotal role in transistor-based memories and thus are under intense research. In this work, the charge storage ability of type-I InP/ZnS core/shell quantum dots is well revealed through studying a pentacene-based organic transistor with the quantum dots (QDs) integrated. The quantum well-like energy band structure enables the QDs to directly confine either holes or electrons in the core, signifying a dielectric layer-free nonvolatile memory. Especially, the QDs in this device can be charged by electrons using light illumination as the exclusive method. The electron charging process is ascribed to the photoexcitation process in the InP-core and the hot holes induced. The QDs layer demonstrates an electron storage density of ≈5.0 × 1011  cm-2 and a hole storage density of ≈6.4 × 1011  cm-2 . Resultingly, the output device shows a fast response speed to gate voltage (10 µs), large memory window (42 V), good retention (>4.0 × 104 s), and reliable endurance. This work suggests that the core/shell quantum dot as a kind of charge storage medium is of great promise for optoelectronic memories.

Hydrogel with silver nanoparticles synthesized by Mimosa tenuiflora for second-degree burns treatment

In this work we use Mimosa tenuiflora (MtE) extracts as reducing agents to synthesize silver nanoparticles (AgMt NPs) which were characterized by DPPH and Total Polyphenols Assays, UV-visible, X-ray diffractometer (XRD), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and Thermogravimetric analysis (TGA). AgMt NPs possess average sizes of 21 nm and fcc crystalline structure, it was also confirmed that the MtE is present in the AgMt NPs even after the cleaning protocol applied. Subsequently, carbopol hydrogels were made and the MtE and the synthesized AgMt NPs were dispersed in different gels (MtE-G and AgMt NPs-G, respectively) at 100 µg/g concentration. The gels were characterized by UV-Vis, IR, and rheology. Antimicrobial tests were performed using Staphylococcus aureus and Escherichia coli. Burn wound healing was evaluated in a second-degree burn injury on a Wistar rats model for 14 days and additional skin biopsies were examined with histopathological analysis. Gel with commercial silver nanoparticles (Ag NPs) was prepared and employed as a control on the biological assays. Hydrogel system containing silver nanoparticles synthesized with Mimosa tenuiflora (AgMt NPs-G) is a promising therapeutic strategy for burn wound healing, this due to bactericidal and anti-inflammatory effects, which promotes a more effective recovery (in percentage terms) by damaged area.

The effects of long and bulky aromatic pendent groups with flexible linkages on the thermal, mechanical and electrical properties of the polyimides and their nanocomposites with functionalized silica

A novel diamine bis(4-aminophenyl)bis{3,4[(4-(8-quinolyloxymethyl carbonyl)]}methane, containing two long/bulky aromatic pendent chains was synthesized by incorporating aromatic and hetero aromatic groups with flexible linkages. Flexible, stretchable, thermally stable and processable polyimides were prepared by reacting this newly synthesized diamine with commercial tetracarboxylic acid dianhydrides like 3,3',4,4'-benzophenone tetra carboxylic acid dianhydride (BTDA) and 4,4'-(4,4'-isopropylidenediphenoxy)diphthalic Anhydride (BPADA). Nanocomposites of polyimides were prepared using aromatic amine functionalized silica as a filler by solution casting method. The current work investigates the effects of incorporating long/bulky aromatic side chains and flexible linkages on the thermal, mechanical, electrical and optical properties of the polyimides and nanocomposites. The polyimides showed good thermal stability (T 10% = 364 & 388), high flame resistance, low glass transition temperatures (T g = 130 °C & 156 °C), very low dielectric constants (2.5 & 2.8 at 1 MHz) and good optical transparency. The neat polyimides displayed good elongation at break (133-155%) but possessed low tensile strength. The chemically imidized polyimides showed good solubility in low and high boiling solvents. Nanocomposites of polyimides based on aromatic amine functionalized silica exhibited enhanced properties with T 10% values varying between 409-482 °C, T g between 165-280 °C and higher dielectric constants (3-5.7 at 1 MHz).

Morphology effect on zinc oxide quantum photoinitiators for radical polymerization

Semiconductor nanocrystal based photoinitiators, quantum PIs, are a viable alternative to organic photoinitiators demonstrating unique advantages, including a broad and tunable excitation window, limited migration, and more. Aiming towards efficient quantum PIs with tunable properties, a deeper understanding of the relationships between the nanoparticle properties and their efficiency is required. Herein, we studied the morphological effect on ZnO nanocrystals functioning as photoinitiators in both water-based and solvent-free formulations by comparing rod and pyramidal shaped particles of similar volumes and nearly identical surface area. Superior polymerization performances are measured for the nanorods. Photocatalytic characterization including oxygen consumption and reactive oxygen species formation as well as dyes reduction and oxidation, also showed enhanced activities for the nanorods. The different performances were attributed to the anisotropic nanorod morphology which is beneficial for charge separation as well as to the presence of a reactive [0001] facet in the nanorods, which is known to increase the adsorption of molecular oxygen and anionic molecules, thus affecting the catalytic activity. These observations, along with the higher photoinitiation efficiency of the ZnO nanorods, bring them closer to functionality as photoinitiators in numerous photopolymerization applications.

Performance of Spherical Quantum Well Down Converters in Solid State Lighting

We report the color conversion performance of amber and red emitting quantum dots (QDs) on InGaN solid-state lighting (SSL) light emitting diode (LED) packages. Spherical quantum well (SQW) architectures (CdS/CdSe_1-xS_x/CdS) were prepared using a library of thio- and selenourea synthesis reagents and high throughput synthesis robotics. CdS/CdSe_1-xS_x QDs with narrow luminescence bands were coated with thick CdS shells (thickness = 1.6-7.5 nm) to achieve photoluminescence quantum yields (PLQY) up to 88% at amber and red emission wavelengths (λ_max = 600-642 nm, FWHM < 45 nm). The photoluminescence from SQWs encapsulated in silicone and deposited on LED packages was monitored under accelerated aging conditions (oven temperature = 85 °C, relative humidity = 5-85%, blue optical power density = 3-45 W/cm²) by monitoring the red photon output over several hundred hours of continuous operation. The growth of a ZnS shell on the SQW surface increases the stability under long-term operation but also reduces the PLQY, especially of SQWs with thick CdS shells. The results illustrate that the outer ZnS shell layer is key to optimizing the PLQY and the long-term stability of QDs during operation on SSL packages.

Nanotechnology for catalysis and solar energy conversion

This roadmap on Nanotechnology for Catalysis and Solar Energy Conversion focuses on the application of nanotechnology in addressing the current challenges of energy conversion: 'high efficiency, stability, safety, and the potential for low-cost/scalable manufacturing' to quote from the contributed article by Nathan Lewis. This roadmap focuses on solar-to-fuel conversion, solar water splitting, solar photovoltaics and bio-catalysis. It includes dye-sensitized solar cells (DSSCs), perovskite solar cells, and organic photovoltaics. Smart engineering of colloidal quantum materials and nanostructured electrodes will improve solar-to-fuel conversion efficiency, as described in the articles by Waiskopf and Banin and Meyer. Semiconductor nanoparticles will also improve solar energy conversion efficiency, as discussed by Boschloo et al in their article on DSSCs. Perovskite solar cells have advanced rapidly in recent years, including new ideas on 2D and 3D hybrid halide perovskites, as described by Spanopoulos et al 'Next generation' solar cells using multiple exciton generation (MEG) from hot carriers, described in the article by Nozik and Beard, could lead to remarkable improvement in photovoltaic efficiency by using quantization effects in semiconductor nanostructures (quantum dots, wires or wells). These challenges will not be met without simultaneous improvement in nanoscale characterization methods. Terahertz spectroscopy, discussed in the article by Milot et al is one example of a method that is overcoming the difficulties associated with nanoscale materials characterization by avoiding electrical contacts to nanoparticles, allowing characterization during device operation, and enabling characterization of a single nanoparticle. Besides experimental advances, computational science is also meeting the challenges of nanomaterials synthesis. The article by Kohlstedt and Schatz discusses the computational frameworks being used to predict structure-property relationships in materials and devices, including machine learning methods, with an emphasis on organic photovoltaics. The contribution by Megarity and Armstrong presents the 'electrochemical leaf' for improvements in electrochemistry and beyond. In addition, biohybrid approaches can take advantage of efficient and specific enzyme catalysts. These articles present the nanoscience and technology at the forefront of renewable energy development that will have significant benefits to society.

Quantum Photoinitiators: Toward Emerging Photocuring Applications

Semiconductor nanocrystals are promising photocatalysts for a wide range of applications, ranging from alternative fuel generation to biomedical and environmental applications. This stems from their diverse properties, including flexible spectral tunability, stability, and photocatalytic efficiencies. Their functionality depends on the complex influence of multiple parameters, including their composition, dimensions, architecture, surface coating, and environmental conditions. A particularly promising direction for rapid adoption of these nanoparticles as photocatalysts is their ability to act as photoinitiators (PIs) for radical polymerization. Previous studies served to demonstrate the proof of concept for the use of quantum confined semiconductor nanocrystals as photoinitiators, coining the term Quantum PIs, and provided insights for their photocatalytic mechanism of action. However, these early reports suffered from low efficiencies while requiring purging with inert gases, use of additives, and irradiation by high light intensities with very long excitation durations, which limited their potential for real-life applications. The progress in nanocrystal syntheses and surface engineering has opened the way to the introduction of the next generation of Quantum PIs. Herein, we introduce the research area of nanocrystal photocatalysts, review their studies as Quantum PIs for radical polymerization, from suspension polymerization to novel printing, as well as in a new family of polymerization techniques, of reversible deactivation radical polymerization, and provide a forward-looking view for the challenges and prospects of this field.

Shedding Light on the Role of Misfit Strain in Controlling Core-Shell Nanocrystals

Heteroepitaxial modification of nanomaterials has become a powerful means to create novel functionalities for various applications. One of the most elementary factors in heteroepitaxial nanostructures is the misfit strain arising from mismatched lattices of the constituent parts. Misfit strain not only dictates epitaxy kinetics for diversifying nanocrystal morphologies but also provides rational control over materials properties. In recent years, advances in chemical synthesis along with the rapid development of electron microscopy and X-ray diffraction techniques have enabled a substantial understanding of strain-related processes, which offers theoretical foundation and experimental guidance for researchers to refine heteroepitaxial nanostructures and their properties. Herein, recent investigations on heterogeneous core-shell nanocrystals containing misfit strains are summarized, with a focus on the mechanistic understanding of strain and strain-induced effects such as tuning the epitaxial habit, modulating the optical emission, and enhancing the catalytic activity and magnetic coercivity.

Ligand-Induced Chirality in Asymmetric CdSe/CdS Nanostructures: A Close Look at Chiral Tadpoles

Ligand-induced chirality in asymmetric CdSe/CdS core-shell nanocrystals (NCs) has been extensively applied in chiral biosensors, regioselective syntheses and assemblies, circularly polarized luminescence (CPL), and chiroptic-based devices due to their excellent physiochemical properties, such as the tunable quantum confinement effects, surface functionality, and chemical stability. Herein, we present CdSe/CdS NCs with various morphologies such as nanoflowers, tadpoles, and dot/rods (DRs) with chirality induced by surface chiral ligands. The observed circular dichroism (CD) and CPL activities are closely associated with the geometrical characteristics of the nanostructures, such as the shell thickness and the aspect ratio of the CdSe/CdS NCs. Furthermore, in situ observations of the growth of tadpoles with a single tail indicate that the CD response is mainly attributed to the CdS shell, which has a maximum tail length of ∼45 nm (approximately λ/10 of the incident light wavelength). On the other hand, the CPL activity is only related to the CdSe core, and the activity benefits from a thin CdS shell with a relatively high photoluminescence quantum yield (QY). Further theoretical models demonstrated the aspect-ratio-dependent g-factor and QY variations in these asymmetric nanostructures. These findings provide insights into not only the asymmetric synthesis of CdSe/CdS NCs, but also the rational design of CdSe/CdS nanostructures with tunable CD and CPL activities.

Piezochromic luminescence in all-inorganic core-shell InP/ZnS nanocrystals via pressure-modulated strain engineering

Piezochromic materials alter their photoluminescent (PL) colors in response to the action of external force. Such materials have attracted much attention owing to their promising applications in pressure-sensing, optoelectronic memory and anticounterfeiting. However, almost all the reported piezochromic materials were limited to the organic matters or compounds containing organic components. Here we present piezochromic materials and pressure-induced optical response based on all-inorganic core/shell InP/ZnS nanocrystals (NCs). The InP/ZnS NCs exhibit noticeable PL color changes, shifting from orange (2.08 eV) to green (2.25 eV), with the PL intensity showing slight enhancement below an applied pressure of 2.5 GPa. Further compressing to fluorescence quenching produces an ultrabroad energy tenability range up to 400 meV. Structural and time-resolved PL lifetime studies, together with first-principle calculations, reveal the weakening of strain-induced defect states in the low pressure regime, which contributes to effective excition recombination, thus ensuring high fluorescence emission of InP/ZnS NCs. This work provides a promising strategy to prepare piezochromic materials of all-inorganic semiconductors, thereby greatly increasing the choice of materials for new applications.

Tuning epitaxial growth on NaYbF4 upconversion nanoparticles by strain management

Core-shell structural engineering is a common strategy for tuning upconversion luminescence in lanthanide-doped nanoparticles. However, epitaxial growth on hexagonal phase NaYbF₄ nanoparticles typically suffers from incomplete shell coverage due to the large and anisotropic interfacial strain. Herein, we explore the effects of core particle size and morphology as well as reaction temperature on controlling the epitaxial growth of NaGdF₄ shells on NaYbF₄ nanoparticles with misfit parameters of f_a = 1.58% and f_l = 2.24% for axial and lateral growth, respectively. Rod-like core particles with a long length and a large diameter are found to promote shell growth with high surface coverage by facilitating the relaxation of lattice strains. Furthermore, the primary NaGdF₄ shell can serve as a transition layer to mediate the growth of additional NaNdF₄ coating layers that display an even larger lattice misfit with the core (f_a = 2.98%; f_l = 4.32%). The resultant NaYbF₄@Na(Gd/Nd)F₄ core-shell nanostructures simultaneously show strong multiphoton upconversion luminescence and superior magnetic resonance T₁ ionic relaxivity. Our findings are important for the rational design of core-shell upconversion nanoparticles with optimized properties and functionality for technological applications.

Enzyme-catalysed polymer cross-linking: Biocatalytic tools for chemical biology, materials science and beyond

Intermolecular cross-linking is one of the most important techniques that can be used to fundamentally alter the material properties of a polymer. The introduction of covalent bonds between individual polymer chains creates 3D macromolecular assemblies with enhanced mechanical properties and greater chemical or thermal tolerances. In contrast to many chemical cross-linking reactions, which are the basis of thermoset plastics, enzyme catalysed processes offer a complimentary paradigm for the assembly of cross-linked polymer networks through their predictability and high levels of control. Additionally, enzyme catalysed reactions offer an inherently 'greener' and more biocompatible approach to covalent bond formation, which could include the use of aqueous solvents, ambient temperatures, and heavy metal-free reagents. Here, we review recent progress in the development of biocatalytic methods for polymer cross-linking, with a specific focus on the most promising candidate enzyme classes and their underlying catalytic mechanisms. We also provide exemplars of the use of enzyme catalysed cross-linking reactions in industrially relevant applications, noting the limitations of these approaches and outlining strategies to mitigate reported deficiencies.

ZnSe/ZnS Core/Shell Quantum Dots with Superior Optical Properties through Thermodynamic Shell Growth

Epitaxial growth of a protective semiconductor shell on a colloidal quantum dot (QD) core is the key strategy for achieving high fluorescence quantum efficiency and essential stability for optoelectronic applications and biotagging with emissive QDs. Herein we investigate the effect of shell growth rate on the structure and optical properties in blue-emitting ZnSe/ZnS QDs with narrow emission line width. Tuning the precursor reactivity modifies the growth mode of ZnS shells on ZnSe cores transforming from kinetic (fast) to thermodynamic (slow) growth regimes. In the thermodynamic growth regime, enhanced fluorescence quantum yields and reduced on-off blinking are achieved. This high performance is ascribed to the effective avoidance of traps at the interface between the core and the shell, which are detrimental to the emission properties. Our study points to a general strategy to obtain high-quality core/shell QDs with enhanced optical properties through controlled reactivity yielding shell growth in the thermodynamic limit.

Co-production of DHA and squalene by thraustochytrid from forest biomass

Omega-3 fatty acids, and specifically docosahexaenoic acid (DHA), are important and essential nutrients for human health. Thraustochytrids are recognised as commercial strains for nutraceuticals production, they are group of marine oleaginous microorganisms capable of co-synthesis of DHA and other valuable carotenoids in their cellular compartment. The present study sought to optimize DHA and squalene production by the thraustochytrid Schizochytrium limacinum SR21. The highest biomass yield (0.46 g/g_substrate) and lipid productivity (0.239 g/g_substrate) were observed with 60 g/L of glucose, following cultivation in a bioreactor, with the DHA content to be 67.76% w/w_{total lipids}. To reduce costs, cheaper feedstocks and simultaneous production of various value-added products for pharmaceutical or energy use should be attempted. To this end, we replaced pure glucose with organosolv-pretreated spruce hydrolysate and assessed the simultaneous production of DHA and squalene from S. limacinum SR21. After the 72 h of cultivation period in bioreactor, the maximum DHA content was observed to 66.72% w/w_{total lipids} that was corresponded to 10.15 g/L of DHA concentration. While the highest DHA productivity was 3.38 ± 0.27 g/L/d and squalene reached a total of 933.72 ± 6.53 mg/L (16.34 ± 1.81 mg/g_CDW). In summary, we show that the co-production of DHA and squalene makes S. limacinum SR21 appropriate strain for commercial-scale production of nutraceuticals.

Controllable synthesis of a 3D ZnS@MoO3 heterojunction via a hydrothermal method towards efficient NO purification under visible light

Heterojunctions can deliver superior photocatalytic efficiency via modulating the surface-interface reaction, enhancing light absorption and hindering charge carrier recombination.

Heavy-Metal-Free Colloidal Semiconductor Nanorods: Recent Advances and Future Perspectives

Quasi-1D colloidal semiconductor nanorods (NRs) are at the forefront of nanoparticle (NP) research owing to their intriguing size-dependent and shape-dependent optical and electronic properties. The past decade has witnessed significant advances in both fundamental understanding of the growth mechanisms and applications of these stimulating materials. Herein, the state-of-the-art of colloidal semiconductor NRs is reviewed, with special emphasis on heavy-metal-free materials. The main growth mechanisms of heavy-metal-free colloidal semiconductor NRs are first elaborated, including anisotropic-controlled growth, oriented attachment, solution-liquid-solid method, and cation exchange. Then, structural engineering and properties of semiconductor NRs are discussed, with a comprehensive overview of core/shell structures, alloying, and doping, as well as semiconductor-metal hybrid nanostructures, followed by highlighted practical applications in terms of photocatalysis, photodetectors, solar cells, and biomedicine. Finally, challenges and future opportunities in this fascinating research area are proposed.

Colloidal quasi-one-dimensional dual semiconductor core/shell nanorod couple heterostructures with blue fluorescence

Herein we report a nanorod couple heterostructure made of dual semiconductors, in which two parallelly aligned ZnSe nanorods are connected by the growth of ZnS on both end and side facets, producing hetero-ZnS (short arms)-ZnSe (long arms)/ZnS shell nanorod couples. As evidenced by electronic structure studies, both experimental and theoretical, such core/shell nanorod couple heterostructures can act as a platform to precisely tailor the quantum confinement of charge carriers between the constituting components within a single nano-object, generating blue fluorescence after the overgrowth of an alloyed ZnCdS layer on the heterostructures. We foresee the mechanistic insights gained and electronic structures revealed in this work would shed light on the rational design of more complex heterostructures with novel functionalities.