Macroscopic weavable fibers of carbon nanotubes with giant thermoelectric power factor

Fibres-threads of intelligence-enable a new generation of wearable systems

Fabrics represent a unique platform for seamlessly integrating electronics into everyday experiences. The advancements in functionalizing fabrics at both the single fibre level and within constructed fabrics have fundamentally altered their utility. The revolution in materials, structures, and functionality at the fibre level enables intimate and imperceptible integration, rapidly transforming fibres and fabrics into next-generation wearable devices and systems. In this review, we explore recent scientific and technological breakthroughs in smart fibre-enabled fabrics. We examine common challenges and bottlenecks in fibre materials, physics, chemistry, fabrication strategies, and applications that shape the future of wearable electronics. We propose a closed-loop smart fibre-enabled fabric ecosystem encompassing proactive sensing, interactive communication, data storage and processing, real-time feedback, and energy storage and harvesting, intended to tackle significant challenges in wearable technology. Finally, we envision computing fabrics as sophisticated wearable platforms with system-level attributes for data management, machine learning, artificial intelligence, and closed-loop intelligent networks.

N-DMBI Doping of Carbon Nanotube Yarns for Achieving High n-Type Thermoelectric Power Factor and Figure of Merit

The application of carbon nanotube (CNT) yarns as thermoelectric materials for harvesting energy from low-grade waste heat including that generated by the human body, is attracting considerable attention. However, the lack of efficient n-type CNT yarns hinders their practical implementation in thermoelectric devices. This study reports efficient n-doping of CNT yarns, employing 4-(1, 3-dimethyl-2, 3-dihydro-1H-benzimidazole-2-yl) phenyl) dimethylamine (N-DMBI) in alternative to conventional n-dopants, with o-dichlorobenzene emerging as the optimal solvent. The small molecular size of N-DMBI enables highly efficient doping within a remarkably short duration (10 s) while ensuring prolonged stability in air and at high temperature (150 °C). Furthermore, Joule annealing of the yarns significantly improves the n-doping efficiency. Consequently, thermoelectric power factors (PFs) of 2800, 2390, and 1534 µW m-1 K-2 are achieved at 200, 150, and 30 °C, respectively. The intercalation of N-DMBI molecules significantly suppresses the thermal conductivity, resulting in the high figure of merit (ZT) of 1.69×10-2 at 100 °C. Additionally, a π-type thermoelectric module is successfully demonstrated incorporating both p- and n-doped CNT yarns. This study offers an efficient doping strategy for achieving CNT yarns with high thermoelectric performance, contributing to the realization of lightweight and mechanically flexible CNT-based thermoelectric devices.

Capillary compression induced outstanding n-type thermoelectric power factor in CNT films towards intelligent temperature controller

One-dimensional carbon nanotubes are promising candidates for thermoelectrics because of their excellent electrical and mechanical properties. However, the large n-type power factor remains elusive in macroscopic carbon nanotubes films. Herein, we report an outstanding n-type power factor of 6.75 mW m-1 K-2 for macroscopic carbon nanotubes films with high electrical and thermal conductivity. A high-power density curl-able thermoelectric generator is fabricated with the obtained carbon nanotubes films, which exhibits a high normalized power output density of 2.75 W m-1 at a temperature difference of 85 K. The value is higher than that of previously reported flexible all-inorganic thermoelectric generators (<0.3 W m-1). An intelligent temperature controller with automated temperature-controlling ability is fabricated by assembling these thermoelectric generators, which demonstrates the potential application of the carbon nanotubes films in automated thermal management of electronic devices where requires a large thermoelectric power factor and a large thermal conductivity simultaneously.

Upscaling Thermoelectrics: Micron-Thick, Half-a-Meter-Long Carbon Nanotube Films with Monolithic Integration of p- and n-Legs

In order for organic thermoelectrics to successfully establish their own niche as energy-harvesting materials, they must reach several crucial milestones, including high performance, long-term stability, and scalability. Performance and stability are currently being actively studied, whereas demonstrations of large-scale compatibility are far more limited and for carbon nanotubes (CNTs) are still missing. The scalability challenge includes material-related economic considerations as well as the availability of fast deposition methods that produce large-scale films that simultaneously satisfy the thickness constraints required for thermoelectric modules. Here we report on true solutions of CNTs that form gels upon air exposure, which can then be dried into micron-thick films. The CNT ink can be extruded using a slot-shaped nozzle into a continuous film (more than half a meter in the present paper) and patterned into alternating n- and p-type components, which are then folded to obtain the finished thermoelectric module. Starting from a given n-type film, differentiation between the n and p components is achieved by a simple postprocessing step that involves a partial oxidation reaction and neutralization of the dopant. The presented method allows the thermoelectric legs to seamlessly interconnect along the continuous film, thus avoiding the need for metal electrodes, and, most importantly, it is compatible with large-scale printing processes. The resulting thermoelectric legs retain 80% of their power factor after 100 days in air and about 30% after 300 days. Using the proposed methodology, we fabricate two thermoelectric modules of 4 and 10 legs that can produce maximum power outputs of 1 and 2.4 μW, respectively, at a temperature difference ΔT of 46 K.

High-performance flexible p-type Ce-filled Fe3CoSb12 skutterudite thin film for medium-to-high-temperature applications

P-type Fe3CoSb12-based skutterudite thin films are successfully fabricated, exhibiting high thermoelectric performance, stability, and flexibility at medium-to-high temperatures, based on preparing custom target materials and employing advanced pulsed laser deposition techniques to address the bonding challenge between the thin films and high-temperature flexible polyimide substrates. Through the optimization of fabrication processing and nominal doping concentration of Ce, the thin films show a power factor of >100 μW m-1 K-2 and a ZT close to 0.6 at 653 K. After >2000 bending cycle tests at a radius of 4 mm, only a 6 % change in resistivity can be observed. Additionally, the assembled p-type Fe3CoSb12-based flexible device exhibits a power density of 135.7 µW cm-2 under a temperature difference of 100 K with the hot side at 623 K. This work fills a gap in the realization of flexible thermoelectric devices in the medium-to-high-temperature range and holds significant practical application value.

Phase-Transition-Promoted Thermoelectric Textiles Based on Twin Surface-Modified CNT Fibers

With the fast development of new science and technology, wearable devices are in great demand in modern human daily life. However, the energy problem is a long-lasting issue to achieve real smart, wearable, and portable devices. Flexible thermoelectric generators (TEGs) based on thermoelectric conversion systems can convert body waste heat into electricity with excellent flexibility and wearability, which shows a new direction to solving this issue. Here in this work, polyethylenimine (PEI) and gold nanoparticles (Au NPs) twin surface-modified carbon nanotube fibers (CNTFs) were designed and prepared to fabricate thermoelectric textiles (TET) with high performance, good air stability, and high-efficiency power generation. To better utilize the heat emitted by the human body, microencapsulated phase change materials (MPCM) were coated on the hot end of the TET to achieve the phase-transition-promoted TET. MPCM-coated TET device could generate 25.7% more energy than the untreated control device, which indicates the great potential of the phase-transition-promoted TET.

Wearable Aerogels for Personal Thermal Management and Smart Devices

Extreme climates have become frequent nowadays, causing increased heat stress in human daily life. Personal thermal management (PTM), a technology that controls the human body's microenvironment, has become a promising strategy to address heat stress. While effective in ordinary environments, traditional high-performance fibers, such as ultrafine, porous, highly thermally conductive, and phase change materials, fall short when dealing with harsh conditions or large temperature fluctuations. Aerogels, a third-generation superinsulation material, have garnered extensive attention among researchers for their thermal management applications in building energy conservation, transportation, and aerospace, attributed to their extremely low densities and thermal conductivity. While aerogels have historically faced challenges related to weak mechanical strength and limited secondary processing capacity, recent advancements have witnessed notable progress in the development of wearable aerogels for PTM. This progress underscores their potential applications within extremely harsh environments, serving as self-powered smart devices and sensors. This Review offers a timely overview of wearable aerogels and their PTM applications with a particular focus on their wearability and suitability. Finally, the discussion classifies five types of PTM applications based on aerogel function: thermal insulation, heating, cooling, adaptive regulation (involving thermal insulation, heating, and cooling), and utilization of aerogels as wearable smart devices.

Synergistic Interactions in Sequential Process Doping of Polymer/Single-Walled Carbon Nanotube Nanocomposites for Enhanced n-Type Thermoelectric Performance

This study focuses on the fabrication of nanocomposite thermoelectric devices by blending either a naphthalene-diimide (NDI)-based conjugated polymer (NDI-T1 or NDI-T2), or an isoindigo (IID)-based conjugated polymer (IID-T2), with single-walled carbon nanotubes (SWCNTs). This is followed by sequential process doping method with the small molecule 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI) to provide the nanocomposite with n-type thermoelectric properties. Experiments in which the concentrations of the N-DMBI dopant are varied demonstrate the successful conversion of all three polymer/SWCNT nanocomposites from p-type to n-type behavior. Comprehensive spectroscopic, microstructural, and morphological analyses of the pristine polymers and the various N-DMBI-doped polymer/SWCNT nanocomposites are performed in order to gain insights into the effects of various interactions between the polymers and SWCNTs on the doping outcomes. Among the obtained nanocomposites, the NDI-T1/SWCNT exhibits the highest n-type Seebeck coefficient and power factor of -57.7 µV K-1 and 240.6 µW m-1 K-2 , respectively. However, because the undoped NDI-T2/SWCNT exhibits a slightly higher p-type performance, an integral p-n thermoelectric generator is fabricated using the doped and undoped NDI-T2/SWCNT nanocomposite. This device is shown to provide an output power of 27.2 nW at a temperature difference of 20 K.

Porous Conductive Textiles for Wearable Electronics

Over the years, researchers have made significant strides in the development of novel flexible/stretchable and conductive materials, enabling the creation of cutting-edge electronic devices for wearable applications. Among these, porous conductive textiles (PCTs) have emerged as an ideal material platform for wearable electronics, owing to their light weight, flexibility, permeability, and wearing comfort. This Review aims to present a comprehensive overview of the progress and state of the art of utilizing PCTs for the design and fabrication of a wide variety of wearable electronic devices and their integrated wearable systems. To begin with, we elucidate how PCTs revolutionize the form factors of wearable electronics. We then discuss the preparation strategies of PCTs, in terms of the raw materials, fabrication processes, and key properties. Afterward, we provide detailed illustrations of how PCTs are used as basic building blocks to design and fabricate a wide variety of intrinsically flexible or stretchable devices, including sensors, actuators, therapeutic devices, energy-harvesting and storage devices, and displays. We further describe the techniques and strategies for wearable electronic systems either by hybridizing conventional off-the-shelf rigid electronic components with PCTs or by integrating multiple fibrous devices made of PCTs. Subsequently, we highlight some important wearable application scenarios in healthcare, sports and training, converging technologies, and professional specialists. At the end of the Review, we discuss the challenges and perspectives on future research directions and give overall conclusions. As the demand for more personalized and interconnected devices continues to grow, PCT-based wearables hold immense potential to redefine the landscape of wearable technology and reshape the way we live, work, and play.

Stretchable photothermal membrane of NIR-II charge-transfer cocrystal for wearable solar thermoelectric power generation

Harvesting sunlight into cost-effective electricity presents an enticing prospect for self-powered wearable applications. The photothermal materials with an extensive absorption are fundamental to achieve optical and thermal concentration of the sunlight for efficiency output electricity of wearable solar thermoelectric generators (STEGs). Here, we synthesize an organic charge-transfer (CT) cocrystal with a flat absorption from ultraviolet to second near-infrared region (200 to 1950 nanometers) and a high photothermal conversion efficiency (PCE) of 80.5%, which is introduced into polyurethane toward large-area nanofiber membrane by electrospinning technology. These corresponding membranes demonstrate a high PCE of 73.7% under the strain more than 80%. Sandwiched with carbon nanotube-based thermoelectric fibers, the membranes as stretchable solar absorbers of STEGs could supply a notably increase temperature gradient, processing a maximum output voltage density of 23.4 volts per square meter at 1:00 p.m. under sunlight. This strategy presents an important insight in heat management for wearable STEGs with a desired electricity output.

Densification Induced Decoupling of Electrical and Thermal Properties in Free-Standing MWCNT Films for Ultrahigh p- and n-Type Power Factors and Enhanced ZT

Generating sufficient power from waste heat is one of the most important things for thermoelectric (TE) techniques in numerous practical applications. The output power density of an organic thermoelectric generator (OTEG) is proportional to the power factors (PFs) and the electrical conductivities of organic materials. However, it is still challenging to have high PFs over 1 mW m-1  K-2 in free-standing films together with high electrical conductivities over 1000 S cm-1 . Herein, densifying multi-walled carbon nanotube (MWCNT) films would increase their electrical conductivity dramatically up to over 10 000 S cm-1 with maintained high Seebeck coefficients >60 µV K-1 , thus leading to ultrahigh PFs of 7.25 and 4.34 mW m-1  K-2 for p- and n-type MWCNT films, respectively. In addition, it is interesting to notice that the electrical properties increase faster than the thermal conductivities, resulting in enhanced ZT of 3.6 times in MWCNT films. An OTEG made of compressed MWCNT films is fabricated to demonstrate the heat-to-electricity conversion ability, which exhibits a high areal output power of ∼12 times higher than that made of pristine MWCNT films. This work demonstrates an effective way to high-performance nanowire/nanoparticle-based TE materials such as printable TE materials comprised of nanowires/nanoparticles.

Molecular Engineering for Enhanced Thermoelectric Performance of Single-Walled Carbon Nanotubes/π-Conjugated Organic Small Molecule Hybrids

Hybridizing single-walled carbon nanotubes (SWCNTs) with π-conjugated organic small molecules (π-OSMs) offers a promising approach for producing high-performance thermoelectric (TE) materials through the facile optimization of the molecular geometry and energy levels of π-OSMs. Designing a twisted molecular structure for the π-OSM with the highest occupied molecular orbital energy level comparable to the valence band of SWCNTs enables effective energy filtering between the two materials. The SWCNTs/twisted π-OSM hybrid exhibits a high Seebeck coefficient of 110.4 ± 2.6 µV K-1 , leading to a significantly improved power factor of 2,136 µW m-1 K-2 , which is 2.6 times higher than that of SWCNTs. Moreover, a maximum figure of merit over 0.13 at room temperature is achieved via the efficient TE transport of the SWCNTs/twisted π-OSM hybrid. The study highlights the promising potential of optimizing molecular engineering of π-OSMs for hybridization with SWCNTs to create next-generation, efficient TE materials.

Ambient-Stable n-Type Carbon Nanotube/Organic Small-Molecule Thermoelectrics Enabled by Energy Level Control

The stability of n-type organic and hybrid thermoelectric materials is limited in terms of their practical application to p-n parallel thermoelectric devices. We demonstrate the ambient stability of an n-type single-walled carbon nanotube/organic small-molecule (SWNT/OSM) hybrid by deepening the lowest occupied molecular orbital energy level. This hybrid exhibited the best figure of merit (0.032) among n-type SWNT/OSM hybrid thermoelectrics and an enhanced power factor of 291.0 μW m-1 K-2. Furthermore, we observed that the n-type thermoelectric stability of a hybrid of SWNT and pip containing two N-ethylpiperidinyl groups on both sides of a naphthalenediimide core was retained at 87% over 7 months (220 days) under ambient conditions without encapsulation.

High thermoelectric performance in metallic NiAu alloys via interband scattering

Thermoelectric materials seamlessly convert thermal into electrical energy, making them promising for power generation and cooling applications. Although historically the thermoelectric effect was first discovered in metals, state-of-the-art research focuses on semiconductors. Here, we discover unprecedented thermoelectric performance in metals and realize ultrahigh power factors up to 34 mW m-1 K-2 in binary NixAu1-x alloys, more than twice larger than in any bulk material above room temperature, reaching zTmax ∼ 0.5. In metallic NixAu1-x alloys, large Seebeck coefficients originate from electron-hole selective scattering of Au s electrons into more localized Ni d states. This intrinsic energy filtering effect owing to the unique band structure yields a strongly energy-dependent carrier mobility. While the metastable nature of the Ni-Au system as well as the high cost of Au pose some constraints for practical applications, our work challenges the common belief that good metals are bad thermoelectrics and presents an auspicious route toward high thermoelectric performance exploiting interband scattering.

Recent Advances in Carbon Nanotube-Based Energy Harvesting Technologies

There has been enormous interest in technologies that generate electricity from ambient energy such as solar, thermal, and mechanical energy, due to their potential for providing sustainable solutions to the energy crisis. One driving force behind the search for new energy-harvesting technologies is the desire to power sensor networks and portable devices without batteries, such as self-powered wearable electronics, human health monitoring systems, and implantable wireless sensors. Various energy harvesting technologies have been demonstrated in recent years. Among them, electrochemical, hydroelectric, triboelectric, piezoelectric, and thermoelectric nanogenerators have been extensively studied because of their special physical properties, ease of application, and sometimes high obtainable efficiency. Multifunctional carbon nanotubes (CNTs) have attracted much interest in energy harvesting because of their exceptionally high gravimetric power outputs and recently obtained high energy conversion efficiencies. Further development of this field, however, still requires an in-depth understanding of harvesting mechanisms and boosting of the electrical outputs for wider applications. Here, various CNT-based energy harvesting technologies are comprehensively reviewed, focusing on working principles, typical examples, and future improvements. The last section discusses the existing challenges and future directions of CNT-based energy harvesters.

Catalytic CO2 Capture via Ultrasonically Activating Dually Functionalized Carbon Nanotubes

High energy consumption and high cost have been the obstacles for large-scale deployment of all state-of-the-art CO₂ capture technologies. Finding a transformational way to improve mass transfer and reaction kinetics of the CO₂ capture process is timely for reducing carbon footprints. In this work, commercial single-walled carbon nanotubes (CNTs) were activated with nitric acid and urea under ultrasonication and hydrothermal methods, respectively, to prepare N-doped CNTs with the functional group of -COOH, which possesses both basic and acid functionalities. The chemically modified CNTs with a concentration of 300 ppm universally catalyze both CO₂ sorption and desorption of the CO₂ capture process. The increases in the desorption rate achieved with the chemically modified CNTs can reach as high as 503% compared to that of the sorbent without the catalyst. A chemical mechanism underlying the catalytic CO₂ capture is proposed based on the experimental results and further confirmed by density functional theory computations.

Acid enhanced zipping effect to densify MWCNT packing for multifunctional MWCNT films with ultra-high electrical conductivity

The outstanding electrical and mechanical properties remain elusive on macroscopic carbon nanotube (CNT) films because of the difficult material process, which limits their wide practical applications. Herein, we report high-performance multifunctional MWCNT films that possess the specific electrical conductivity of metals as well as high strength. These MWCNT films were synthesized by a floating chemical vapor deposition method, purified at high temperature and treated with concentrated HCl, and then densified due to the developed chlorosulfonic acid-enhanced zipping effect. These large scalable films exhibit high electromagnetic interference shielding efficiency, high thermoelectric power factor, and high ampacity because of the densely packed crystalline structure of MWCNTs, which are promising for practical applications.

Fabrication and thermoelectric conversion of thermoelectric concrete brick with buried unileg N-type CaMnO3 thermoelectric module inside

To investigate the effect of heat loss reduction due to thermal insulator and thermal interface resistance due to multi-layer structure in order to improve the efficiency of a thermoelectric device, a thermoelectric concrete brick was fabricated using a unileg n-type CaMnO₃ thermoelectric module inside. CaMnO₃ thermoelectric materials were synthesized by starting materials CaCO₃ and MnO₂ to produce a unileg n-type CaMnO₃ module. Thermoelectric concrete brick consisted of two types: I-layer brick (one layer of concrete thermal insulator) and III-layer brick (three layers of different concrete insulators). The occurring temperature difference, electric current and voltage on the CaMnO₃ module and thermoelectric concrete brick were measured in closed and open circuits. The temperature difference, thermal distribution, and output voltage when applying constant temperatures of 100, 200 and 400 °C were measured. Computer simulations of the Finite Element Method (FEM) were performed to compare with the experimental results. The trends of the temperature difference and the output voltage from the experimental and computer simulations were in good agreement. The results of the temperature difference during the hotter side temperature of 200 °C exhibited the temperature difference along the vertical direction of the thermoelectric concrete bricks for both types of the III-layer brick of 172 °C and the I-layer brick of 132 °C are larger than that of the CaMnO₃ TEG module without using a thermal concrete insulator of 108 °C. The thermoelectric concrete bricks of the III-layer brick type of 27.70 mV displayed output voltage results being higher than those of the I-layer brick of 26.57 mV and the CaMnO₃ TEG module without using a thermal concrete insulator of 24.35 mV. Thermoelectric concrete brick of the III-layer brick type displayed higher electric generation power than the I-layer brick and the CaMnO₃ TEG module. Additionally, the results exhibited the capability of thermoelectric concrete brick in the III-layer brick model for electric generation power based on the temperature difference. The TEG concrete brick of I-layer concrete covering the series-parallel combination circuit of 120 modules of the unileg n-type CaMnO₃ was constructed and then embedded on the outer surface of the furnace. During the maximum hotter side temperature of 580 °C of the concrete brick, the temperature difference between the hotter side and the cooler side of the brick occurred at 365 °C and the maximum output voltage was obtained at 581.7 mV.

Superstrong Carbon Nanotube Yarns by Developing Multiscale Bundle Structures on the Direct Spin-Line without Post-Treatment

Super strong fibers, such as carbon or aramid fibers, have long been used as effective fillers for advanced composites. In this study, the highest tensile strength of 5.5 N tex-1 for carbon nanotube yarns (CNTYs) is achieved by controlling the micro-textural structure through a facile and eco-friendly bundle engineering process in direct spinning without any post-treatment. Inspired by the strengthening mechanism of the hierarchical fibrillary structure of natural cellulose fiber, this study develops multiscale bundle structures in CNTYs whereby secondary bundles, ≈200 nm in thickness, evolve from the assembly of elementary bundles, 30 nm in thickness, without any damage, which is a basic load-bearing element in CNTY. The excellent mechanical performance of these CNTYs makes them promising substitutes for the benchmark, lightweight, and super strong commercial fibers used for energy-saving structural materials. These findings address how the tensile strength of CNTY can be improved without additional post-treatment in the spinning process if the development of the aforementioned secondary bundles and the corresponding orientations are properly engineered.

Hierarchical Materials from High Information Content Macromolecular Building Blocks: Construction, Dynamic Interventions, and Prediction

Hierarchical materials that exhibit order over multiple length scales are ubiquitous in nature. Because hierarchy gives rise to unique properties and functions, many have sought inspiration from nature when designing and fabricating hierarchical matter. More and more, however, nature's own high-information content building blocks, proteins, peptides, and peptidomimetics, are being coopted to build hierarchy because the information that determines structure, function, and interfacial interactions can be readily encoded in these versatile macromolecules. Here, we take stock of recent progress in the rational design and characterization of hierarchical materials produced from high-information content blocks with a focus on stimuli-responsive and "smart" architectures. We also review advances in the use of computational simulations and data-driven predictions to shed light on how the side chain chemistry and conformational flexibility of macromolecular blocks drive the emergence of order and the acquisition of hierarchy and also on how ionic, solvent, and surface effects influence the outcomes of assembly. Continued progress in the above areas will ultimately usher in an era where an understanding of designed interactions, surface effects, and solution conditions can be harnessed to achieve predictive materials synthesis across scale and drive emergent phenomena in the self-assembly and reconfiguration of high-information content building blocks.

Simultaneously enhanced tenacity, rupture work, and thermal conductivity of carbon nanotube fibers by raising effective tube portion

Although individual carbon nanotubes (CNTs) are superior to polymer chains, the mechanical and thermal properties of CNT fibers (CNTFs) remain inferior to synthetic fibers because of the failure of embedding CNTs effectively in superstructures. Conventional techniques resulted in a mild improvement of target properties while degrading others. Here, a double-drawing technique is developed to rearrange the constituent CNTs. Consequently, the mechanical and thermal properties of the resulting CNTFs can simultaneously reach their highest performances with specific strength ~3.30 N tex-1 (4.60 GPa), work of rupture ~70 J g-1, and thermal conductivity ~354 W m-1 K-1 despite starting from low-crystallinity materials (IG:ID ~ 5). The processed CNTFs are more versatile than comparable carbon fiber, Zylon and Dyneema. On the basis of evidence of load transfer efficiency on individual CNTs measured with in situ stretching Raman, we find that the main contributors to property enhancements are the increasing of the effective tube contribution.

Ultra-long air-stability of n-type carbon nanotube films with low thermal conductivity and all-carbon thermoelectric generators

This report presents n-type single-walled carbon nanotubes (SWCNT) films with ultra-long air stability using a cationic surfactant and demonstrates that the n-type Seebeck coefficient can be maintained for more than two years, which is the highest stability reported thus far to the best of our knowledge. Furthermore, the SWCNT films exhibit an extremely low thermal conductivity of 0.62 ± 0.08 W/(m·K) in the in-plane direction, which is very useful for thin-film TEGs. We fabricated all-carbon-nanotube TEGs, which use p-type SWCNT films and the n-type SWCNT films developed, and their air-stability was investigated. The TEGs did not degrade for 160 days and exhibited an output voltage of 24 mV, with a maximum power of 0.4 µW at a temperature difference of 60 K. These results open a pathway to enable the widespread use of carbon nanotube TEGs as power sources in IoT sensors.

Semiconductor Multimaterial Optical Fibers for Biomedical Applications

Integrated sensors and transmitters of a wide variety of human physiological indicators have recently emerged in the form of multimaterial optical fibers. The methods utilized in the manufacture of optical fibers facilitate the use of a wide range of functional elements in microscale optical fibers with an extensive variety of structures. This article presents an overview and review of semiconductor multimaterial optical fibers, their fabrication and postprocessing techniques, different geometries, and integration in devices that can be further utilized in biomedical applications. Semiconductor optical fiber sensors and fiber lasers for body temperature regulation, in vivo detection, volatile organic compound detection, and medical surgery will be discussed.

Direct Wet-Spun Single-Walled Carbon Nanotubes-Based p-n Segmented Filaments toward Wearable Thermoelectric Textiles

Three-dimensional thermoelectric (TE) textiles (TETs) fabricated with TE filaments (TEFs) possess merits over other types such as thickness-direction thermal energy harvesting and excellent conformability with dynamic body curves, revealing the prospect of generating electricity for on-body application. Nonetheless, there is still a lack of a costless but scalable method to automatically and seamlessly produce in-series interconnected p-n segmented TEFs with high TE properties via conventional fiber spinning processes. Here, we developed an alternate wet-spinning strategy to continuously manufacture single-walled carbon nanotube-based p-n segmented TEFs at large scale. The TEF with high electrical conductivity (400-800 S cm^-1) displays a low contact resistivity of 189.8 μΩ cm² between the segments and interelectrode, showing 2 orders of magnitude smaller than that reported in the literature. More importantly, the power factors of p-type and n-type segments are 26.25 and 17.14 μW m^-1 K^-2, respectively, which are 3 and 4 orders of magnitude higher than those of advanced studies. We finally embroidered it into spacer fabric to fabricate a wearable TET, demonstrating an output power density of 501 nW m^-2 at ΔT = 27.7 K. The methodology can inspire the development of fiber-based electronics such as wearable TEs and diodes and so forth.

Ultrastrong Hybrid Fibers with Tunable Macromolecular Interfaces of Graphene Oxide and Carbon Nanotube for Multifunctional Applications

Individual carbon nanotubes (CNT) and graphene have unique mechanical and electrical properties; however, the properties of their macroscopic assemblies have not met expectations because of limited physical dimensions, the limited degree of dispersion of the components, and various structural defects. Here, a state-of-the-art assembly for a novel type of hybrid fiber possessing the properties required for a wide variety of multifunctional applications is presented. A simple and effective multidimensional nanostructure of CNT and graphene oxide (GO) assembled by solution processing improves the interfacial utilization of the components. Flexible GOs are effectively intercalated between nanotubes along the shape of CNTs, which reduces voids, enhances orientation, and maximizes the contact between elements. The microstructure is finely controlled by the elements content ratio and dimensions, and an optimal balance improves the mechanical properties. The hybrid fibers simultaneously exhibit exceptional strength (6.05 GPa), modulus (422 GPa), toughness (76.8 J g-1 ), electrical conductivity (8.43 MS m-1 ), and knot strength efficiency (92%). Furthermore, surface and electrochemical properties are significantly improved by tuning the GO content, further expanding the scope of applications. These hybrid fibers are expected to offer a strategy for overcoming the limitations of existing fibers in meeting the requirements for applications in the fiber industry.

Constructing A/B-Side Heterogeneous Asynchronous Structure with Ag2Se Layers and Bushy-like PPy toward High-Performance Flexible Photo-Thermoelectric Generators

The enthusiasm for environmental energy harvesting has triggered a boom in research on photo-thermoelectric generators (PTEGs), and the relevant applications are mainly focused on self-energy supply sensors owing to the limitations of their output performances. For this purpose, high-output hierarchical heterogeneous PTEGs were constructed by assembling separately optimized thermoelectric (TE) and photothermal (PT) layers. The pressure and temperature conditions of Ag2Se films during the pressing process were first explored, and the sample with the optimal performance and least defects was selected as the TE layer. At the same time, different morphologies of polypyrrole (PPy) PT layers were electrochemically synthesized. It is found that the three-dimensional structure of Bushy-PPy could effectively improve the light absorption and thus enhance the PT conversion performance. The final assembled PTEG can produce an output voltage of -9.03 mV and an output power of 3.53 μW under the irradiation of a near-infrared light source of 300 mW cm-2 without a cooling source, and it can also achieve considerable output power under visible light irradiation of different intensities. Combining its high retentions of electrical conductivity (99%) and output performance (97%) after 1000 bending-tension cycles, it is proven to be a promising next-generation wearable flexible energy harvesting device.

Stretchable Temperature-Responsive Multimodal Neuromorphic Electronic Skin with Spontaneous Synaptic Plasticity Recovery

Multimodal electronic skin devices capable of detecting multimodal signals provide the possibility for health monitoring. Sensing and memory for temperature and deformation by human skin are of great significance for the perception and monitoring of physiological changes of the human body. Electronic skin is highly expected to have similar functions as human skin. Here, by implementing intrinsically stretchable neuromorphic transistors with mechanoreceptors and thermoreceptors in an array, we have realized stretchable temperature-responsive multimodal neuromorphic electronic skin (STRM-NES) with both sensory and memory functions, in which synaptic plasticity can be modulated by multiple modalities, in situ temperature variations, and stretching deformations. Temperature-responsive functions, spontaneous recovery, and temperature-dependent multitrial learning are proposed. Furthermore, a stretchable temperature neuromorphic array composed of multiple fully functional subcells is demonstrated to identify temperature distributions and variations at different regions and conditions after various strains of skin. The STRM-NES has temperature- and strain-responsive neuromorphic functions, excellent self-healing, and reusable capability, showing similar abilities as human skin to sense, transmit, memory, and recovery from external stimuli. It is expected to facilitate the development of wearable electronics, intelligent robotics, and prosthetic applications.

MXene-Based Textile Sensors for Wearable Applications

Textile-based sensors in the form of a wearable computing device that can be attached to or worn on the human body not only can transmit information but also can be used as a smart sensing device to access the mobile internet. These sensors represent a potential platform for the next generation of human-computer interfaces. The continuous emergence of new conductive materials is one of the driving forces for the development of textile sensors. Recently, a two-dimensional (2D) MXene material with excellent performance has received extensive attention due to its high conductivity, processability, and mechanical stability. In this paper, the synthesis of MXene materials, the fabrication of conductive textiles, the structural design of textile sensors, and the application of MXene-based textile sensors in the wearable field are reviewed. Furthermore, from the perspective of MXene preparation, wearability, stability, and evaluation standards, the difficulties and challenges of MXene-based textile sensors in the field of wearable applications are summarized and prospected. This review attempts to strengthen the connection between wearable smart textiles and MXene materials and promote the rapid development of wearable MXene-based textile sensors.

Carbon Nanotube-Based Thermoelectric Modules Enhanced by ZnO Nanowires

Carbon nanotubes (CNTs) have a wide range of unique properties, which have kept them at the forefront of research in recent decades. Due to their electrical and thermal characteristics, they are often evaluated as key components of thermogenerators. One can create thermogenerators exclusively from CNTs, without any metal counterpart, by properly selecting dopants to obtain n- and p-doped CNTs. However, the performance of CNT thermogenerators remains insufficient to reach wide commercial implementation. This study shows that molecular doping and the inclusion of ZnO nanowires (NWs) can greatly increase their application potential. Moreover, prototype modules, based on single-walled CNTs (SWCNTs), ZnO NWs, polyethyleneimine, and triazole, reveal notable capabilities for generating electrical energy, while ensuring fully scalable performance. Upon doping and the addition of ZnO nanowires, the electrical conductivity of pure SWCNTs (211 S/cm) was increased by a factor of three. Moreover, the proposed strategy enhanced the Power Factor values from 18.99 (unmodified SWCNTs) to 34.9 and 42.91 µW/m∙K² for CNTs triazole and polyethyleneimine + ZnO NWs inclusion, respectively.

Carbon Nanotube Devices for Quantum Technology

Carbon nanotubes, quintessentially one-dimensional quantum objects, possess a variety of electrical, optical, and mechanical properties that are suited for developing devices that operate on quantum mechanical principles. The states of one-dimensional electrons, excitons, and phonons in carbon nanotubes with exceptionally large quantization energies are promising for high-operating-temperature quantum devices. Here, we discuss recent progress in the development of carbon-nanotube-based devices for quantum technology, i.e., quantum mechanical strategies for revolutionizing computation, sensing, and communication. We cover fundamental properties of carbon nanotubes, their growth and purification methods, and methodologies for assembling them into architectures of ordered nanotubes that manifest macroscopic quantum properties. Most importantly, recent developments and proposals for quantum information processing devices based on individual and assembled nanotubes are reviewed.