Chemometric analysis in Raman spectroscopy from experimental design to machine learning-based modeling

Two-step machine learning-assisted label-free surface-enhanced Raman spectroscopy for reliable prediction of dissolved furfural in transformer oil

Accurate detection of dissolved furfural in transformer oil is crucial for real-time monitoring of the aging state of transformer oil-paper insulation. While label-free surface-enhanced Raman spectroscopy (SERS) has demonstrated high sensitivity for dissolved furfural in transformer oil, challenges persist due to poor substrate consistency and low quantitative reliability. Herein, machine learning (ML) algorithms were employed in both substrate fabrication and spectral analysis of label-free SERS. Initially, a high-consistency Ag@Au substrate was prepared through a combination of experiments, particle swarm optimization-neural network (PSO-NN), and a hybrid strategy of particle swarm optimization and genetic algorithm (Hybrid PSO-GA). Notably, a two-step ML framework was proposed, whose operational mechanism is classification followed by quantification. The framework adopts a hierarchical modeling strategy, incorporating simple algorithms such as kernel support vector machine (Kernel-SVM), k-nearest neighbors (KNN), etc., to independently establish lightweight regression models on each cluster, which allows each model to focus more effectively on fitting the data within its cluster. The classification model achieved an accuracy of 100%, while the regression models exhibited an average correlation coefficient (R2) of 0.9953 and the root mean square errors (RMSE) consistently below 10-2. Thus, this ML framework emerges as a rapid and reliable method for detecting dissolved furfural in transformer oil, even in the presence of different interfering substances, which may also have potentiality for other complex mixture monitoring systems.

Hyperspectral unmixing for Raman spectroscopy via physics-constrained autoencoders

Raman spectroscopy is widely used across scientific domains to characterize the chemical composition of samples in a nondestructive, label-free manner. Many applications entail the unmixing of signals from mixtures of molecular species to identify the individual components present and their proportions, yet conventional methods for chemometrics often struggle with complex mixture scenarios encountered in practice. Here, we develop hyperspectral unmixing algorithms based on autoencoder neural networks, and we systematically validate them using both synthetic and experimental benchmark datasets created in-house. Our results demonstrate that unmixing autoencoders provide improved accuracy, robustness, and efficiency compared to standard unmixing methods. We also showcase the applicability of autoencoders to complex biological settings by showing improved biochemical characterization of volumetric Raman imaging data from a monocytic cell.

Hybrid Raman and Partial Wave Spectroscopy Microscope for the Characterization of Molecular and Structural Alterations in Tissue

We present a hybrid Raman spectroscopy (RS) and partial wave spectroscopy (PWS) microscope for the characterization of molecular and structural tissue alterations. The PWS performance was assessed with surface roughness standards, while the Raman performance with a silicon crystal standard. We also validated the system on stomach and intestinal mouse tissues, two closely-related tissue types, and demonstrate that the addition of PWS information improves RS data classification for these tissue types from R2 = 0.892 to R2 = 0.964 (norm of residuals 0.863 and 0.497, respectively). Then, in a proof-of-concept experiment, we show that the hybrid system can detect changes in intestinal tissues harvested from a tumorigenic Villin-Cre, Apcfl/wt mouse. We discuss how the hybrid modality offers new abilities to identify the relative roles of PWS morphological features and Raman molecular fingerprints, possibly allowing for their combination to enhance the study of carcinogenesis and early cancer diagnostics in the future.

A Universal Framework for General Prediction of Physicochemical Properties: The Natural Growth Model

To precisely and reasonably describe the contribution of interatomic and intermolecular interactions to the physicochemical properties of complex systems, a chemical message passing strategy as driven by graph neural network is proposed. Thus, by distinguishing inherent and environmental features of atoms, as well as proper delivering of these messages upon growth of systems from atoms to bulk level, the evolution of system features affords eventually the target properties like the adsorption wavelength, emission wavelength, solubility, photoluminescence quantum yield, ionization energy, and lipophilicity. Considering that such a model combines chemical principles and natural behavior of atom aggregation crossing multiple scales, most likely, it will be proven to be rational and efficient for more general aims in dealing with complex systems.

Artifacts and Anomalies in Raman Spectroscopy: A Review on Origins and Correction Procedures

Raman spectroscopy, renowned for its unique ability to provide a molecular fingerprint, is an invaluable tool in industry and academic research. However, various constraints often hinder the measurement process, leading to artifacts and anomalies that can significantly affect spectral measurements. This review begins by thoroughly discussing the origins and impacts of these artifacts and anomalies stemming from instrumental, sampling, and sample-related factors. Following this, we present a comprehensive list and categorization of the existing correction procedures, including computational, experimental, and deep learning (DL) approaches. The review concludes by identifying the limitations of current procedures and discussing recent advancements and breakthroughs. This discussion highlights the potential of these advancements and provides a clear direction for future research to enhance correction procedures in Raman spectral analysis.

CODI: Enhancing machine learning-based molecular profiling through contextual out-of-distribution integration

Molecular analytics increasingly utilize machine learning (ML) for predictive modeling based on data acquired through molecular profiling technologies. However, developing robust models that accurately capture physiological phenotypes is challenged by the dynamics inherent to biological systems, variability stemming from analytical procedures, and the resource-intensive nature of obtaining sufficiently representative datasets. Here, we propose and evaluate a new method: Contextual Out-of-Distribution Integration (CODI). Based on experimental observations, CODI generates synthetic data that integrate unrepresented sources of variation encountered in real-world applications into a given molecular fingerprint dataset. By augmenting a dataset with out-of-distribution variance, CODI enables an ML model to better generalize to samples beyond the seed training data, reducing the need for extensive experimental data collection. Using three independent longitudinal clinical studies and a case-control study, we demonstrate CODI's application to several classification tasks involving vibrational spectroscopy of human blood. We showcase our approach's ability to enable personalized fingerprinting for multiyear longitudinal molecular monitoring and enhance the robustness of trained ML models for improved disease detection. Our comparative analyses reveal that incorporating CODI into the classification workflow consistently leads to increased robustness against data variability and improved predictive accuracy.

Biomedical SERS - the current state and future trends

Surface enhanced Raman spectroscopy (SERS) is meeting the requirements in biomedical science being a highly sensitive and specific analytical tool. By employing portable Raman systems in combination with customized sample pre-treatment, point-of-care-testing (POCT) becomes feasible. Powerful SERS-active sensing surfaces with high stability and modification layers if required are available for testing and application in complex biological matrices such as body fluids, cells or tissues. This review summarizes the current state in sample collection and pretreatment in SERS detection protocols, SERS detection schemes, i.e. direct and indirect SERS as well as targeted and non-targeted SERS, and SERS-active sensing surfaces. Moreover, the recent developments and advances of SERS in biomedical application scenarios, such as infectious diseases, cancer diagnostics and therapeutic drug monitoring is given, which enables the readers to identify the sample collection and preparation protocols, SERS substrates and detection strategies that are best-suited for their specific applications in biomedicine.

Characterization of vaginal Lactobacillus in biologically relevant fluid using surface-enhanced Raman spectroscopy

The native vaginal microbiome plays a crucial role in maintaining vaginal health and disruption can have significant consequences for women during their lifetime. While the composition of the vaginal microbiome is important, current methods for monitoring this community are lacking. Clinically used techniques routinely rely on subjective analysis of vaginal fluid characteristics or time-consuming microorganism culturing. Surface-enhanced Raman spectroscopy (SERS) can aid in filling this gap in timely detection of alterations in the vaginal microbiome as it can discriminate between bacterial species in complex solutions including bacterial mixtures and biofluids. SERS has not previously been applied to study variations in vaginal Lactobacillus, the most common species found in the vaginal microbiome, in complex solutions. Herein, the SERS spectra of Lactobacillus crispatus (L. crispatus) and Lactobacillus iners (L. iners), two of the most common vaginal bacteria, was characterized at physiologically relevant concentrations. Subsequently, the ability of SERS to detect L. crispatus and L. iners in both pure mixtures and when mixed with a synthetic vaginal fluid mimicking solution was determined. In both pure and complex solutions, SERS coupled with partial least squares regression predicted the ratiometric bacterial content with less than 10% error and strong goodness of prediction (Q2 > 0.9). This developed method highlights the applicability of SERS to predict the dominant Lactobacillus in the vaginal micro-environment toward the monitoring of this community.

Standardized Electric-Field-Resolved Molecular Fingerprinting

Field-resolved infrared spectroscopy (FRS) of impulsively excited molecular vibrations can surpass the sensitivity of conventional time-integrating spectroscopies, owing to a temporal separation of the molecular signal from the noisy excitation. However, the resonant response carrying the molecular signal of interest depends on both the amplitude and phase of the excitation, which can vary over time and across different instruments. To date, this has compromised the accuracy with which FRS measurements could be compared, which is a crucial factor for practical applications. Here, we utilize a data processing procedure that overcomes this shortcoming while preserving the sensitivity of FRS. We validate the approach for aqueous solutions of molecules. The employed approach is compatible with established processing and evaluation methods for the analysis of infrared spectra and can be applied to existing spectra from databases, facilitating the spread of FRS to new molecular analytical applications.

Raman spectroscopy - a visit to the literature on plant, food, and agricultural studies

Raman spectroscopy, a fast, non-invasive, and label-free optical technique, has significantly advanced plant and food studies and precision agriculture by providing detailed molecular insights into biological tissues. Utilizing the Raman scattering effect generates unique spectral fingerprints that comprehensively analyze tissue composition, concentration, and molecular structure. These fingerprints are obtained without chemical additives or extensive sample preparation, making Raman spectroscopy particularly suitable for in-field applications. Technological enhancements such as surface-enhanced Raman scattering, Fourier-transform-Raman spectroscopy, and chemometrics have increased Raman spectroscopy sensitivity and precision. These and other advancements enable real-time monitoring of compound translocation within plants and improve the detection of chemical and biological contaminants, essential for food safety and crop optimization. Integrating Raman spectroscopy into agronomic practices is transformative and marks a shift toward more sustainable farming activities. It assesses crop quality - as well as the quality of the food that originated from crop production - early plant stress detection and supports targeted breeding programs. Advanced data processing techniques and machine learning integration efficiently handle complex spectral data, providing a dynamic and detailed view of food conditions and plant health under varying environmental and biological stresses. As global agriculture faces the dual challenges of increasing productivity and sustainability, Raman spectroscopy stands out as an indispensable tool, enhancing farming practices' precision, food safety, and environmental compatibility. This review is intended to select and briefly comment on outstanding literature to give researchers, students, and consultants a reference for works of literature in Raman spectroscopy mainly focused on plant, food, and agronomic sciences. © 2024 Society of Chemical Industry.

Raman spectroscopic deep learning with signal aggregated representations for enhanced cell phenotype and signature identification

Feature representation is critical for data learning, particularly in learning spectroscopic data. Machine learning (ML) and deep learning (DL) models learn Raman spectra for rapid, nondestructive, and label-free cell phenotype identification, which facilitate diagnostic, therapeutic, forensic, and microbiological applications. But these are challenged by high-dimensional, unordered, and low-sample spectroscopic data. Here, we introduced novel 2D image-like dual signal and component aggregated representations by restructuring Raman spectra and principal components, which enables spectroscopic DL for enhanced cell phenotype and signature identification. New ConvNet models DSCARNets significantly outperformed the state-of-the-art (SOTA) ML and DL models on six benchmark datasets, mostly with >2% improvement over the SOTA performance of 85-97% accuracies. DSCARNets also performed well on four additional datasets against SOTA models of extremely high performances (>98%) and two datasets without a published supervised phenotype classification model. Explainable DSCARNets identified Raman signatures consistent with experimental indications.

Diagnostic application in streptozotocin-induced diabetic retinopathy rats: A study based on Raman spectroscopy and machine learning

Vision impairment caused by diabetic retinopathy (DR) is often irreversible, making early-stage diagnosis imperative. Raman spectroscopy emerges as a powerful tool, capable of providing molecular fingerprints of tissues. This study employs RS to detect ex vivo retinal tissue from diabetic rats at various stages of the disease. Transmission electron microscopy was utilized to reveal the ultrastructural changes in retinal tissue. Following spectral preprocessing of the acquired data, the random forest and orthogonal partial least squares-discriminant analysis algorithms were employed for spectral data analysis. The entirety of Raman spectra and all annotated bands accurately and distinctly differentiate all animal groups, and can identify significant molecules from the spectral data. Bands at 524, 1335, 543, and 435 cm-1 were found to be associated with the preproliferative phase of DR. Bands at 1045 and 1335 cm-1 were found to be associated with early stages of DR.

SERS microscopy as a tool for comprehensive biochemical characterization in complex samples

Surface enhanced Raman scattering (SERS) spectra of biomaterials such as cells or tissues can be used to obtain biochemical information from nanoscopic volumes in these heterogeneous samples. This tutorial review discusses the factors that determine the outcome of a SERS experiment in complex bioorganic samples. They are related to the SERS process itself, the possibility to selectively probe certain regions or constituents of a sample, and the retrieval of the vibrational information in order to identify molecules and their interaction. After introducing basic aspects of SERS experiments in the context of biocompatible environments, spectroscopy in typical microscopic settings is exemplified, including the possibilities to combine SERS with other linear and non-linear microscopic tools, and to exploit approaches that improve lateral and temporal resolution. In particular the great variation of data in a SERS experiment calls for robust data analysis tools. Approaches will be introduced that have been originally developed in the field of bioinformatics for the application to omics data and that show specific potential in the analysis of SERS data. They include the use of simulated data and machine learning tools that can yield chemical information beyond achieving spectral classification.

Iterative Regression of Corrective Baselines (IRCB): A New Model for Quantitative Spectroscopy

In this work, a new model with broad utility for quantitative spectroscopy development is reported. A primary objective of this work is to create a novel modeling procedure that may allow for higher automation of the model development process. The fundamental concept is simple yet powerful even for complex spectra and is employed with no additional preprocessing. This approach is applicable for several types of spectroscopic data to develop regression models that have similar or greater quality than the current methods. The key modeling steps are a matrix transformation and subsequent feature selection process that are collectively referred to as iterative regression of corrective baselines (IRCB). The transformed matrix (Xtransform) is a linearized form of the original X data set. Features from Xtransform that are predictive of Y can be ranked and selected by ordinary least-squares regression. The best features (rows of Xtransform) are linear depictions of Y that can be utilized to develop regression models with several machine learning models. The IRCB workflow is first detailed by using a case study of Fourier transform infrared (FTIR) spectroscopy for prepared solutions of a three-component mixture. Next, IRCB is applied and compared to benchmark results for the 2006 "Chimiométrie" near-infrared spectroscopy (NIR) soil composition challenge and Raman measurements of a simulated nuclear waste slurry.

Improving skin cancer detection by Raman spectroscopy using convolutional neural networks and data augmentation

Background

Our previous studies have demonstrated that Raman spectroscopy could be used for skin cancer detection with good sensitivity and specificity. The objective of this study is to determine if skin cancer detection can be further improved by combining deep neural networks and Raman spectroscopy.

Patients and methods

Raman spectra of 731 skin lesions were included in this study, containing 340 cancerous and precancerous lesions (melanoma, basal cell carcinoma, squamous cell carcinoma and actinic keratosis) and 391 benign lesions (melanocytic nevus and seborrheic keratosis). One-dimensional convolutional neural networks (1D-CNN) were developed for Raman spectral classification. The stratified samples were divided randomly into training (70%), validation (10%) and test set (20%), and were repeated 56 times using parallel computing. Different data augmentation strategies were implemented for the training dataset, including added random noise, spectral shift, spectral combination and artificially synthesized Raman spectra using one-dimensional generative adversarial networks (1D-GAN). The area under the receiver operating characteristic curve (ROC AUC) was used as a measure of the diagnostic performance. Conventional machine learning approaches, including partial least squares for discriminant analysis (PLS-DA), principal component and linear discriminant analysis (PC-LDA), support vector machine (SVM), and logistic regression (LR) were evaluated for comparison with the same data splitting scheme as the 1D-CNN.

Results

The ROC AUC of the test dataset based on the original training spectra were 0.886±0.022 (1D-CNN), 0.870±0.028 (PLS-DA), 0.875±0.033 (PC-LDA), 0.864±0.027 (SVM), and 0.525±0.045 (LR), which were improved to 0.909±0.021 (1D-CNN), 0.899±0.022 (PLS-DA), 0.895±0.022 (PC-LDA), 0.901±0.020 (SVM), and 0.897±0.021 (LR) respectively after augmentation of the training dataset (p<0.0001, Wilcoxon test). Paired analyses of 1D-CNN with conventional machine learning approaches showed that 1D-CNN had a 1-3% improvement (p<0.001, Wilcoxon test).

Conclusions

Data augmentation not only improved the performance of both deep neural networks and conventional machine learning techniques by 2-4%, but also improved the performance of the models on spectra with higher noise or spectral shifting. Convolutional neural networks slightly outperformed conventional machine learning approaches for skin cancer detection by Raman spectroscopy.

Multi-branch attention Raman network and surface-enhanced Raman spectroscopy for the classification of neurological disorders

Surface-enhanced Raman spectroscopy (SERS), a rapid, low-cost, non-invasive, ultrasensitive, and label-free technique, has been widely used in-situ and ex-situ biomedical diagnostics questions. However, analyzing and interpreting the untargeted spectral data remains challenging due to the difficulty of designing an optimal data pre-processing and modelling procedure. In this paper, we propose a Multi-branch Attention Raman Network (MBA-RamanNet) with a multi-branch attention module, including the convolutional block attention module (CBAM) branch, deep convolution module (DCM) branch, and branch weights, to extract more global and local information of characteristic Raman peaks which are more distinctive for classification tasks. CBAM, including channel and spatial aspects, is adopted to enhance the distinctive global information on Raman peaks. DCM is used to supplement local information of Raman peaks. Autonomously trained branch weights are applied to fuse the features of each branch, thereby optimizing the global and local information of the characteristic Raman peaks for identifying diseases. Extensive experiments are performed for two different neurological disorders classification tasks via untargeted serum SERS data. The results demonstrate that MBA-RamanNet outperforms commonly used CNN methods with an accuracy of 88.24% for the classification of healthy controls, mild cognitive impairment, Alzheimer's disease, and Non-Alzheimer's dementia; an accuracy of 90% for the classification of healthy controls, elderly depression, and elderly anxiety.

RamanSPy: An Open-Source Python Package for Integrative Raman Spectroscopy Data Analysis

Raman spectroscopy is a nondestructive and label-free chemical analysis technique, which plays a key role in the analysis and discovery cycle of various branches of science. Nonetheless, progress in Raman spectroscopic analysis is still impeded by the lack of software, methodological and data standardization, and the ensuing fragmentation and lack of reproducibility of analysis workflows thereof. To address these issues, we introduce RamanSPy, an open-source Python package for Raman spectroscopic research and analysis. RamanSPy provides a comprehensive library of tools for spectroscopic analysis that supports day-to-day tasks, integrative analyses, the development of methods and protocols, and the integration of advanced data analytics. RamanSPy is modular and open source, not tied to a particular technology or data format, and can be readily interfaced with the burgeoning ecosystem for data science, statistical analysis, and machine learning in Python. RamanSPy is hosted at https://github.com/barahona-research-group/RamanSPy, supplemented with extended online documentation, available at https://ramanspy.readthedocs.io, that includes tutorials, example applications, and details about the real-world research applications presented in this paper.

Raman hyperspectroscopy of saliva and machine learning for Sjögren's disease diagnostics

Sjögren's disease is an autoimmune disorder affecting exocrine glands, causing dry eyes and mouth and other morbidities. Polypharmacy or a history of radiation to the head and neck can also lead to dry mouth. Sjogren's disease is often underdiagnosed due to its non-specific symptoms, limited awareness among healthcare professionals, and the complexity of diagnostic criteria, limiting the ability to provide therapy early. Current diagnostic methods suffer from limitations including the variation in individuals, the absence of a single diagnostic marker, and the low sensitivity and specificity, high cost, complexity, and invasiveness of current procedures. Here we utilized Raman hyperspectroscopy combined with machine learning to develop a novel screening test for Sjögren's disease. The method effectively distinguished Sjögren's disease patients from healthy controls and radiation patients. This technique shows potential for development of a single non-invasive, efficient, rapid, and inexpensive medical screening test for Sjögren's disease using a Raman hyper-spectral signature.

Metabolic profiling of murine radiation-induced lung injury with Raman spectroscopy and comparative machine learning

Radiation-induced lung injury (RILI) is a dose-limiting toxicity for cancer patients receiving thoracic radiotherapy. As such, it is important to characterize metabolic associations with the early and late stages of RILI, namely pneumonitis and pulmonary fibrosis. Recently, Raman spectroscopy has shown utility for the differentiation of pneumonitic and fibrotic tissue states in a mouse model; however, the specific metabolite-disease associations remain relatively unexplored from a Raman perspective. This work harnesses Raman spectroscopy and supervised machine learning to investigate metabolic associations with radiation pneumonitis and pulmonary fibrosis in a mouse model. To this end, Raman spectra were collected from lung tissues of irradiated/non-irradiated C3H/HeJ and C57BL/6J mice and labelled as normal, pneumonitis, or fibrosis, based on histological assessment. Spectra were decomposed into metabolic scores via group and basis restricted non-negative matrix factorization, classified with random forest (GBR-NMF-RF), and metabolites predictive of RILI were identified. To provide comparative context, spectra were decomposed and classified via principal component analysis with random forest (PCA-RF), and full spectra were classified with a convolutional neural network (CNN), as well as logistic regression (LR). Through leave-one-mouse-out cross-validation, we observed that GBR-NMF-RF was comparable to other methods by measure of accuracy and log-loss (p > 0.10 by Mann-Whitney U test), and no methodology was dominant across all classification tasks by measure of area under the receiver operating characteristic curve. Moreover, GBR-NMF-RF results were directly interpretable and identified collagen and specific collagen precursors as top fibrosis predictors, while metabolites with immune and inflammatory functions, such as serine and histidine, were top pneumonitis predictors. Further support for GBR-NMF-RF and the identified metabolite associations with RILI was found as CNN interpretation heatmaps revealed spectral regions consistent with these metabolites.

Simultaneous prediction of 16 quality attributes during protein A chromatography using machine learning based Raman spectroscopy models

Several key technologies for advancing biopharmaceutical manufacturing depend on the successful implementation of process analytical technologies that can monitor multiple product quality attributes in a continuous in-line setting. Raman spectroscopy is an emerging technology in the biopharma industry that promises to fit this strategic need, yet its application is not widespread due to limited success for predicting a meaningful number of quality attributes. In this study, we addressed this very problem by demonstrating new capabilities for preprocessing Raman spectra using a series of Butterworth filters. The resulting increase in the number of spectral features is paired with a machine learning algorithm and laboratory automation hardware to drive the automated collection and training of a calibration model that allows for the prediction of 16 different product quality attributes in an in-line mode. The demonstrated ability to generate these Raman-based models for in-process product quality monitoring is the breakthrough to increase process understanding by delivering product quality data in a continuous manner. The implementation of this multiattribute in-line technology will create new workflows within process development, characterization, validation, and control.

Unlocking Preclinical Alzheimer's: A Multi-Year Label-Free In Vitro Raman Spectroscopy Study Empowered by Chemometrics

Alzheimer's disease is a progressive neurodegenerative disorder, the early detection of which is crucial for timely intervention and enrollment in clinical trials. However, the preclinical diagnosis of Alzheimer's encounters difficulties with gold-standard methods. The current definitive diagnosis of Alzheimer's still relies on expensive instrumentation and post-mortem histological examinations. Here, we explore label-free Raman spectroscopy with machine learning as an alternative to preclinical Alzheimer's diagnosis. A special feature of this study is the inclusion of patient samples from different cohorts, sampled and measured in different years. To develop reliable classification models, partial least squares discriminant analysis in combination with variable selection methods identified discriminative molecules, including nucleic acids, amino acids, proteins, and carbohydrates such as taurine/hypotaurine and guanine, when applied to Raman spectra taken from dried samples of cerebrospinal fluid. The robustness of the model is remarkable, as the discriminative molecules could be identified in different cohorts and years. A unified model notably classifies preclinical Alzheimer's, which is particularly surprising because of Raman spectroscopy's high sensitivity regarding different measurement conditions. The presented results demonstrate the capability of Raman spectroscopy to detect preclinical Alzheimer's disease for the first time and offer invaluable opportunities for future clinical applications and diagnostic methods.

Discrimination of ivory from extant and extinct elephant species using Raman spectroscopy: A potential non-destructive technique for combating illegal wildlife trade

The use of elephant ivory as a commodity is a factor in declining elephant populations. Despite recent worldwide elephant ivory trade bans, mammoth ivory trade remains unregulated. This complicates law enforcement efforts, as distinguishing between ivory from extant and extinct species requires costly, destructive and time consuming methods. Elephant and mammoth ivory mainly consists of dentine, a mineralized connective tissue that contains an organic collagenous component and an inorganic component of calcium phosphate minerals, similar in structure to hydroxyapatite crystals. Raman spectroscopy is a non-invasive laser-based technique that has previously been used for the study of bone and mineral chemistry. Ivory and bone have similar biochemical properties, making Raman spectroscopy a promising method for species identification based on ivory. This study aimed to test the hypothesis that it is possible to identify differences in the chemistry of mammoth and elephant ivory using Raman spectroscopy. Mammoth and elephant tusks were obtained from the Natural History Museum in London, UK. Included in this study were eight samples of ivory from Mammuthus primigenius, two samples of carved ivory bangles from Africa (Loxodonta species), and one cross section of a tusk from Elephas maximus. The ivory was scanned using an inVia Raman micro spectrometer equipped with a x50 objective lens and a 785nm laser. Spectra were acquired using line maps and individual spectral points were acquired randomly or at points of interest on all samples. The data was then analysed using principal component analysis (PCA) with use of an in-house MATLAB script. Univariate analysis of peak intensity ratios of phosphate to amide I and III peaks, and carbonate to phosphate peaks showed statistical differences (p<0.0001) in the average peak intensity ratios between Mammuthus primigenius, Loxodonta spp. and Elephas maximus. Full width at half maximum hight (FWHM)analysis of the phosphate peak demonstrated higher crystal maturity of Mammuthus primigenius compared to living elephant species. The results of the study have established that spectra acquired by Raman spectroscopy can be separated into distinct classes through PCA. In conclusion, this study has shown that well-preserved mammoth and elephant ivory has the potential to be characterized using Raman spectroscopy, providing a promising method for species identification. The results of this study will be valuable in developing quick and non-destructive methods for the identification of ivory, which will have direct applications in archaeology and the regulation of international trade.

Rapid identification of lactic acid bacteria at species/subspecies level via ensemble learning of Ramanomes

Rapid and accurate identification of lactic acid bacteria (LAB) species would greatly improve the screening rate for functional LAB. Although many conventional and molecular methods have proven efficient and reliable, LAB identification using these methods has generally been slow and tedious. Single-cell Raman spectroscopy (SCRS) provides the phenotypic profile of a single cell and can be performed by Raman spectroscopy (which directly detects vibrations of chemical bonds through inelastic scattering by a laser light) using an individual live cell. Recently, owing to its affordability, non-invasiveness, and label-free features, the Ramanome has emerged as a potential technique for fast bacterial detection. Here, we established a reference Ramanome database consisting of SCRS data from 1,650 cells from nine LAB species/subspecies and conducted further analysis using machine learning approaches, which have high efficiency and accuracy. We chose the ensemble meta-classifier (EMC), which is suitable for solving multi-classification problems, to perform in-depth mining and analysis of the Ramanome data. To optimize the accuracy and efficiency of the machine learning algorithm, we compared nine classifiers: LDA, SVM, RF, XGBoost, KNN, PLS-DA, CNN, LSTM, and EMC. EMC achieved the highest average prediction accuracy of 97.3% for recognizing LAB at the species/subspecies level. In summary, Ramanomes, with the integration of EMC, have promising potential for fast LAB species/subspecies identification in laboratories and may thus be further developed and sharpened for the direct identification and prediction of LAB species from fermented food.

Raman Flow Cytometry and Its Biomedical Applications

Raman flow cytometry (RFC) uniquely integrates the "label-free" capability of Raman spectroscopy with the "high-throughput" attribute of traditional flow cytometry (FCM), offering exceptional performance in cell characterization and sorting. Unlike conventional FCM, RFC stands out for its elimination of the dependency on fluorescent labels, thereby reducing interference with the natural state of cells. Furthermore, it significantly enhances the detection information, providing a more comprehensive chemical fingerprint of cells. This review thoroughly discusses the fundamental principles and technological advantages of RFC and elaborates on its various applications in the biomedical field, from identifying and characterizing cancer cells for in vivo cancer detection and surveillance to sorting stem cells, paving the way for cell therapy, and identifying metabolic products of microbial cells, enabling the differentiation of microbial subgroups. Moreover, we delve into the current challenges and future directions regarding the improvement in sensitivity and throughput. This holds significant implications for the field of cell analysis, especially for the advancement of metabolomics.

Revisiting El-Sayed Synthesis: Bayesian Optimization for Revealing New Insights during the Growth of Gold Nanorods

In diverse fields, machine learning (ML) has sparked transformative changes, primarily driven by the wealth of big data. However, an alternative approach seeks to mine insights from "precious data", offering the possibility to reveal missed knowledge and escape potential knowledge traps. In this context, Bayesian optimization (BO) protocols have emerged as crucial tools for optimizing the synthesis and discovery of a broad spectrum of compounds including nanoparticles. In our work, we aimed to go beyond the commonly explored experimental conditions and showcase a workflow capable of unearthing fresh insights, even in well-studied research domains. The growth of AuNRs is a nonequilibrium process that remains poorly understood despite the presence of well-established seeded growth protocols. Traditional research aimed at understanding the mechanism of AuNR growth has primarily relied on altering one reaction condition at a time. While these studies are undeniably valuable, they often fail to capture the synergies between different reaction conditions, thus constraining the depth of insights they can offer. In the present study, we exploit BO, to identify diverse experimental conditions yielding AuNRs with similar spectroscopic characteristics. Notably, we identify viable and accelerated synthesis conditions involving elevated temperatures (36-40 °C) as well as high ascorbic acid concentrations. More importantly, we note that ascorbic acid and temperature can modulate each other's undesirable influences on the growth of AuNRs. Finally, by harnessing the power of interpretable ML algorithms, complemented by our deep chemical understanding, we revisited the established hierarchical relationships among reaction conditions that impact the El-Sayed-based growth of AuNRs.

Combination of Machine Learning and Raman Spectroscopy for Determination of the Complex of Whey Protein Isolate with Hyaluronic Acid

Macromolecules and their complexes remain interesting topics in various fields, such as targeted drug delivery and tissue regeneration. The complex chemical structure of such substances can be studied with a combination of Raman spectroscopy and machine learning. The complex of whey protein isolate (WPI) and hyaluronic acid (HA) is beneficial in terms of drug delivery. It provides HA properties with the stability obtained from WPI. However, differences between WPI-HA and WPI solutions can be difficult to detect by Raman spectroscopy. Especially when the low HA (0.1, 0.25, 0.5% w/v) and the constant WPI (5% w/v) concentrations are used. Before applying the machine learning techniques, all the collected data were divided into training and test sets in a ratio of 3:1. The performances of two ensemble methods, random forest (RF) and gradient boosting (GB), were evaluated on the Raman data, depending on the type of problem (regression or classification). The impact of noise reduction using principal component analysis (PCA) on the performance of the two machine learning methods was assessed. This procedure allowed us to reduce the number of features while retaining 95% of the explained variance in the data. Another application of these machine learning methods was to identify the WPI Raman bands that changed the most with the addition of HA. Both the RF and GB could provide feature importance data that could be plotted in conjunction with the actual Raman spectra of the samples. The results show that the addition of HA to WPI led to changes mainly around 1003 cm-1 (correspond to ring breath of phenylalanine) and 1400 cm-1, as demonstrated by the regression and classification models. For selected Raman bands, where the feature importance was greater than 1%, a direct evaluation of the effect of the amount of HA on the Raman intensities was performed but was found not to be informative. Thus, applying the RF or GB estimators to the Raman data with feature importance evaluation could detect and highlight small differences in the spectra of substances that arose from changes in the chemical structure; using PCA to filter out noise in the Raman data could improve the performance of both the RF and GB. The demonstrated results will make it possible to analyze changes in chemical bonds during various processes, for example, conjugation, to study complex mixtures of substances, even with small additions of the components of interest.

Illuminating the Tiny World: A Navigation Guide for Proper Raman Studies on Microorganisms

Raman spectroscopy is an emerging method for the identification of bacteria. Nevertheless, a lot of different parameters need to be considered to establish a reliable database capable of identifying real-world samples such as medical or environmental probes. In this review, the establishment of such reliable databases with the proper design in microbiological Raman studies is demonstrated, shining a light into all the parts that require attention. Aspects such as the strain selection, sample preparation and isolation requirements, the phenotypic influence, measurement strategies, as well as the statistical approaches for discrimination of bacteria, are presented. Furthermore, the influence of these aspects on spectra quality, result accuracy, and read-out are discussed. The aim of this review is to serve as a guide for the design of microbiological Raman studies that can support the establishment of this method in different fields.

Siamese Networks for Clinically Relevant Bacteria Classification Based on Raman Spectroscopy

Identifying bacterial strains is essential in microbiology for various practical applications, such as disease diagnosis and quality monitoring of food and water. Classical machine learning algorithms have been utilized to identify bacteria based on their Raman spectra. However, convolutional neural networks (CNNs) offer higher classification accuracy, but they require extensive training sets and retraining of previous untrained class targets can be costly and time-consuming. Siamese networks have emerged as a promising solution. They are composed of two CNNs with the same structure and a final network that acts as a distance metric, converting the classification problem into a similarity problem. Classical machine learning approaches, shallow and deep CNNs, and two Siamese network variants were tailored and tested on Raman spectral datasets of bacteria. The methods were evaluated based on mean sensitivity, training time, prediction time, and the number of parameters. In this comparison, Siamese-model2 achieved the highest mean sensitivity of 83.61 ± 4.73 and demonstrated remarkable performance in handling unbalanced and limited data scenarios, achieving a prediction accuracy of 73%. Therefore, the choice of model depends on the specific trade-off between accuracy, (prediction/training) time, and resources for the particular application. Classical machine learning models and shallow CNN models may be more suitable if time and computational resources are a concern. Siamese networks are a good choice for small datasets and CNN for extensive data.

Cancer detection in dogs using rapid Raman molecular urinalysis

Introduction

The presence of cancer in dogs was detected by Raman spectroscopy of urine samples and chemometric analysis of spectroscopic data. The procedure created a multimolecular spectral fingerprint with hundreds of features related directly to the chemical composition of the urine specimen. These were then used to detect the broad presence of cancer in dog urine as well as the specific presence of lymphoma, urothelial carcinoma, osteosarcoma, and mast cell tumor.

Methods

Urine samples were collected via voiding, cystocentesis, or catheterization from 89 dogs with no history or evidence of neoplastic disease, 100 dogs diagnosed with cancer, and 16 dogs diagnosed with non-neoplastic urinary tract or renal disease. Raman spectra were obtained of the unprocessed bulk liquid urine samples and were analyzed by ISREA, principal component analysis (PCA), and discriminant analysis of principal components (DAPC) were applied using the Rametrix®Toolbox software.

Results and discussion

The procedure identified a spectral fingerprint for cancer in canine urine, resulting in a urine screening test with 92.7% overall accuracy for a cancer vs. cancer-free designation. The urine screen performed with 94.0% sensitivity, 90.5% specificity, 94.5% positive predictive value (PPV), 89.6% negative predictive value (NPV), 9.9 positive likelihood ratio (LR+), and 0.067 negative likelihood ratio (LR-). Raman bands responsible for discerning cancer were extracted from the analysis and biomolecular associations were obtained. The urine screen was more effective in distinguishing urothelial carcinoma from the other cancers mentioned above. Detection and classification of cancer in dogs using a simple, non-invasive, rapid urine screen (as compared to liquid biopsies using peripheral blood samples) is a critical advancement in case management and treatment, especially in breeds predisposed to specific types of cancer.

Detection of Helicobacter pylori Infection in Human Gastric Fluid Through Surface-Enhanced Raman Spectroscopy Coupled With Machine Learning Algorithms

Diagnostic methods for Helicobacter pylori infection include, but are not limited to, urea breath test, serum antibody test, fecal antigen test, and rapid urease test. However, these methods suffer drawbacks such as low accuracy, high false-positive rate, complex operations, invasiveness, etc. Therefore, there is a need to develop simple, rapid, and noninvasive detection methods for H. pylori diagnosis. In this study, we propose a novel technique for accurately detecting H. pylori infection through machine learning analysis of surface-enhanced Raman scattering (SERS) spectra of gastric fluid samples that were noninvasively collected from human stomachs via the string test. One hundred participants were recruited to collect gastric fluid samples noninvasively. Therefore, 12,000 SERS spectra (n = 120 spectra/participant) were generated for building machine learning models evaluated by standard metrics in model performance assessment. According to the results, the Light Gradient Boosting Machine algorithm exhibited the best prediction capacity and time efficiency (accuracy = 99.54% and time = 2.61 seconds). Moreover, the Light Gradient Boosting Machine model was blindly tested on 2,000 SERS spectra collected from 100 participants with unknown H. pylori infection status, achieving a prediction accuracy of 82.15% compared with qPCR results. This novel technique is simple and rapid in diagnosing H. pylori infection, potentially complementing current H. pylori diagnostic methods.

Noise learning of instruments for high-contrast, high-resolution and fast hyperspectral microscopy and nanoscopy

The low scattering efficiency of Raman scattering makes it challenging to simultaneously achieve good signal-to-noise ratio (SNR), high imaging speed, and adequate spatial and spectral resolutions. Here, we report a noise learning (NL) approach that estimates the intrinsic noise distribution of each instrument by statistically learning the noise in the pixel-spatial frequency domain. The estimated noise is then removed from the noisy spectra. This enhances the SNR by ca. 10 folds, and suppresses the mean-square error by almost 150 folds. NL allows us to improve the positioning accuracy and spatial resolution and largely eliminates the impact of thermal drift on tip-enhanced Raman spectroscopic nanoimaging. NL is also applicable to enhance SNR in fluorescence and photoluminescence imaging. Our method manages the ground truth spectra and the instrumental noise simultaneously within the training dataset, which bypasses the tedious labelling of huge dataset required in conventional deep learning, potentially shifting deep learning from sample-dependent to instrument-dependent.

Raman spectroscopy applied to online monitoring of a bioreactor: Tackling the limit of detection

An in-situ monitoring model of alcoholic fermentation based on Raman spectroscopy was developed in this study. The optimized acquisition parameters were an 80 s exposure time with three accumulations. Standard solutions were prepared and used to populate a learning database. Two groups of mixed solutions were prepared for a validation database to simulate fermentation at different conditions. First, all spectra of the standards were evaluated by principal component analysis (PCA) to identify the spectral features of the target substances and observe their distribution and outliers. Second, three multivariate calibration models for prediction were developed using the partial least squares (PLS) method, either on the whole learning database or subsets. The limit of detection (LOD) of each model was estimated by using the root mean square error of cross validation (RMSECV), and the prediction ability was further tested with both validation datasets. As a result, improved LODs were obtained: 0.42 and 1.55 g·L-1 for ethanol and glucose using a sub-learning dataset with a concentration range of 0.5 to 10 g·L-1. An interesting prediction result was obtained from a cross-mixed validation set, which had a root mean square error of prediction (RMSEP) for ethanol and glucose of only 3.21 and 1.69, even with large differences in mixture concentrations. This result not only indicates that a model based on standard solutions can predict the concentration of a mixed solution in a complex matrix but also offers good prospects for applying the model in real bioreactors.

Raman spectroscopy and its plasmon-enhanced counterparts: A toolbox to probe protein dynamics and aggregation

Protein unfolding and aggregation are often correlated with numerous diseases such as Alzheimer's, Parkinson's, Huntington's, and other debilitating neurological disorders. Such adverse events consist of a plethora of competing mechanisms, particularly interactions that control the stability and cooperativity of the process. However, it remains challenging to probe the molecular mechanism of protein dynamics such as aggregation, and monitor them in real-time under physiological conditions. Recently, Raman spectroscopy and its plasmon-enhanced counterparts, such as surface-enhanced Raman spectroscopy (SERS) and tip-enhanced Raman spectroscopy (TERS), have emerged as sensitive analytical tools that have the potential to perform molecular studies of functional groups and are showing significant promise in probing events related to protein aggregation. We summarize the fundamental working principles of Raman, SERS, and TERS as nondestructive, easy-to-perform, and fast tools for probing protein dynamics and aggregation. Finally, we highlight the utility of these techniques for the analysis of vibrational spectra of aggregation of proteins from various sources such as tissues, pathogens, food, biopharmaceuticals, and lastly, biological fouling to retrieve precise chemical information, which can be potentially translated to practical applications and point-of-care (PoC) devices. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Diagnostic Tools > Diagnostic Nanodevices Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Artificial Intelligence for Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman spectroscopy (SERS), well acknowledged as a fingerprinting and sensitive analytical technique, has exerted high applicational value in a broad range of fields including biomedicine, environmental protection, food safety among the others. In the endless pursuit of ever-sensitive, robust, and comprehensive sensing and imaging, advancements keep emerging in the whole pipeline of SERS, from the design of SERS substrates and reporter molecules, synthetic route planning, instrument refinement, to data preprocessing and analysis methods. Artificial intelligence (AI), which is created to imitate and eventually exceed human behaviors, has exhibited its power in learning high-level representations and recognizing complicated patterns with exceptional automaticity. Therefore, facing up with the intertwining influential factors and explosive data size, AI has been increasingly leveraged in all the above-mentioned aspects in SERS, presenting elite efficiency in accelerating systematic optimization and deepening understanding about the fundamental physics and spectral data, which far transcends human labors and conventional computations. In this review, the recent progresses in SERS are summarized through the integration of AI, and new insights of the challenges and perspectives are provided in aim to better gear SERS toward the fast track.

Investigating the effect of different pre-treatment methods on Raman spectra recorded with different excitation wavelengths

Raman reference libraries can be used for identification of components in unknown samples as Raman spectroscopy offers fingerprint information of the measured samples. Since Raman libraries often contain many different and/or highly similar spectra, it is important that the spectra are a reliable fingerprint for each compound. However, Raman spectra are highly sensitive to the experimental conditions, and the Raman spectra will change in different conditions even though the same sample is measured. Raman data pre-treatment minimizes the differences between Raman spectra arising from different experimental conditions. In this study, different combinations of pre-treatment methods are used to quantify the effect of each pre-treatment step in minimizing the differences between Raman spectra of the same sample in different experimental conditions, e.g., different excitation wavelengths. These different pre-treatment processes are evaluated for six solvents. The spectra differences between spectra recorded with three excitation wavelengths (532 nm, 633 nm, and 830 nm) are evaluated by angular difference index and the influence on a classification model is tested. The angular difference index of each spectrum after every data pre-treatment step shows a decreasing behavior. It could be demonstrated that wavenumber calibration has the largest effect on the differences between the Raman spectra. However, ω4 correction doesn't have a significate effect in this dataset. The classification results show that the prediction accuracy is improving by doing data pre-treatment. In the dataset obtained in 633 nm a lower amount of pre-treatment steps is needed but in the dataset 830 nm more pre-treatment steps are needed for a high accuracy. The result shows that the choice of an optimal pre-treatment method or combination of methods strongly influences the analysis results, but is far from straightforward, since it depends on the characteristics of the data set and the goal of data analysis.

Extracting accurate infrared lineshapes from weak vibrational probes at low concentrations

Fourier-transform infrared (FTIR) spectroscopy using vibrational probes is an ideal tool to detect changes in structure and local environments within biological molecules. However, challenges arise when dealing with weak infrared probes, such as thiocyanates, due to their inherent low signal strengths and overlap with solvent bands. In this protocol we demonstrate:•A streamlined approach for the precise extraction of weak infrared absorption lineshapes from a strong solvent background.•A protocol combining a spectral filter, background modeling, and subtraction.•Our methodology successfully extracts the CN stretching mode peak from methyl thiocyanate at remarkably low concentrations (0.25 mM) in water, previously a challenge for FTIR spectroscopy.This approach offers valuable insights and tools for more accurate FTIR measurements using weak vibrational probes. This enhanced precision can potentially enable new approaches to enhance our understanding of protein structure and dynamics in solution.

Physicochemical understanding of biomineralization by molecular vibrational spectroscopy: From mechanism to nature

The process and mechanism of biomineralization and relevant physicochemical properties of mineral crystals are remarkably sophisticated multidisciplinary fields that include biology, chemistry, physics, and materials science. The components of the organic matter, structural construction of minerals, and related mechanical interaction, etc., could help to reveal the unique nature of the special mineralization process. Herein, the paper provides an overview of the biomineralization process from the perspective of molecular vibrational spectroscopy, including the physicochemical properties of biomineralized tissues, from physiological to applied mineralization. These physicochemical characteristics closely to the hierarchical mineralization process include biological crystal defects, chemical bonding, atomic doping, structural changes, and content changes in organic matter, along with the interface between biocrystals and organic matter as well as the specific mechanical effects for hardness and toughness. Based on those observations, the special physiological properties of mineralization for enamel and bone, as well as the possible mechanism of pathological mineralization and calcification such as atherosclerosis, tumor micro mineralization, and urolithiasis are also reviewed and discussed. Indeed, the clearly defined physicochemical properties of mineral crystals could pave the way for studies on the mechanisms and applications.

Automated calibration and in-line measurement of product quality during therapeutic monoclonal antibody purification using Raman spectroscopy

Current manufacturing and development processes for therapeutic monoclonal antibodies demand increasing volumes of analytical testing for both real-time process controls and high-throughput process development. The feasibility of using Raman spectroscopy as an in-line product quality measuring tool has been recently demonstrated and promises to relieve this analytical bottleneck. Here, we resolve time-consuming calibration process that requires fractionation and preparative experiments covering variations of product quality attributes (PQAs) by engineering an automation system capable of collecting Raman spectra on the order of hundreds of calibration points from two to three stock seed solutions differing in protein concentration and aggregate level using controlled mixing. We used this automated system to calibrate multi-PQA models that accurately measured product concentration and aggregation every 9.3 s using an in-line flow-cell. We demonstrate the application of a nonlinear calibration model for monitoring product quality in real-time during a biopharmaceutical purification process intended for clinical and commercial manufacturing. These results demonstrate potential feasibility to implement quality monitoring during GGMP manufacturing as well as to increase chemistry, manufacturing, and controls understanding during process development, ultimately leading to more robust and controlled manufacturing processes.

Hyperspectral Raman Imaging for Automated Recognition of Human Renal Amyloid

In the clinical setting, routine identification of the main types of tissue amyloid deposits, light-chain amyloid (AL) and serum amyloid A (AA), is based on histochemical staining; rarer types of amyloid require mass spectrometry analysis. Raman spectroscopic imaging is an analytical tool, which can be used to chemically map, and thus characterize, the molecular composition of fluid and solid tissue. In this proof-of-concept study, we tested the feasibility of applying Raman spectroscopy combined with artificial intelligence to detect and characterize amyloid deposits in unstained frozen tissue sections from kidney biopsies with pathologic diagnosis of AL and AA amyloidosis and control biopsies with no amyloidosis (NA). Raman hyperspectral images, mapped in a 2D grid-like fashion over the tissue sections, were obtained. Three machine learning-assisted analysis models of the hyperspectral images could accurately distinguish AL (types λ and κ), AA, and NA 93-100% of the time. Although very preliminary, these findings illustrate the potential of Raman spectroscopy as a technique to identify, and possibly, subtype renal amyloidosis.

Machine Learning-Assisted Low-Dimensional Electrocatalysts Design for Hydrogen Evolution Reaction

Efficient electrocatalysts are crucial for hydrogen generation from electrolyzing water. Nevertheless, the conventional "trial and error" method for producing advanced electrocatalysts is not only cost-ineffective but also time-consuming and labor-intensive. Fortunately, the advancement of machine learning brings new opportunities for electrocatalysts discovery and design. By analyzing experimental and theoretical data, machine learning can effectively predict their hydrogen evolution reaction (HER) performance. This review summarizes recent developments in machine learning for low-dimensional electrocatalysts, including zero-dimension nanoparticles and nanoclusters, one-dimensional nanotubes and nanowires, two-dimensional nanosheets, as well as other electrocatalysts. In particular, the effects of descriptors and algorithms on screening low-dimensional electrocatalysts and investigating their HER performance are highlighted. Finally, the future directions and perspectives for machine learning in electrocatalysis are discussed, emphasizing the potential for machine learning to accelerate electrocatalyst discovery, optimize their performance, and provide new insights into electrocatalytic mechanisms. Overall, this work offers an in-depth understanding of the current state of machine learning in electrocatalysis and its potential for future research.

Combining electromyography and Raman spectroscopy: optical EMG

INTRODUCTION/AIMS

Electromyography (EMG) remains a key component of the diagnostic work-up for suspected neuromuscular disease, but it does not provide insight into the molecular composition of muscle which can provide diagnostic information. Raman spectroscopy is an emerging neuromuscular biomarker capable of generating highly specific, molecular fingerprints of tissue. Here, we present "optical EMG," a combination of EMG and Raman spectroscopy, achieved using a single needle.

METHODS

An optical EMG needle was created to collect electrophysiological and Raman spectroscopic data during a single insertion. We tested functionality with in vivo recordings in the SOD1G93A mouse model of amyotrophic lateral sclerosis (ALS), using both transgenic (n = 10) and non-transgenic (NTg, n = 7) mice. Under anesthesia, compound muscle action potentials (CMAPs), spontaneous EMG activity and Raman spectra were recorded from both gastrocnemius muscles with the optical EMG needle. Standard concentric EMG needle recordings were also undertaken. Electrophysiological data were analyzed with standard univariate statistics, Raman data with both univariate and multivariate analyses.

RESULTS

A significant difference in CMAP amplitude was observed between SOD1G93A and NTg mice with optical EMG and standard concentric needles (p = .015 and p = .011, respectively). Spontaneous EMG activity (positive sharp waves) was detected in transgenic SOD1G93A mice only. Raman spectra demonstrated peaks associated with key muscle components. Significant differences in molecular composition between SOD1G93A and NTg muscle were identified through the Raman spectra.

DISCUSSION

Optical EMG can provide standard electrophysiological data and molecular Raman data during a single needle insertion and represents a potential biomarker for neuromuscular disease.

Recent advances in surface enhanced Raman spectroscopy for bacterial pathogen identifications

BACKGROUND

The rapid and reliable detection of pathogenic bacteria at an early stage is a highly significant research field for public health. However, most traditional approaches for pathogen identification are time-consuming and labour-intensive, which may cause physicians making inappropriate treatment decisions based on an incomplete diagnosis of patients with unknown infections, leading to increased morbidity and mortality. Therefore, novel methods are constantly required to face the emerging challenges of bacterial detection and identification. In particular, Raman spectroscopy (RS) is becoming an attractive method for rapid and accurate detection of bacterial pathogens in recent years, among which the newly developed surface-enhanced Raman spectroscopy (SERS) shows the most promising potential.

AIM OF REVIEW

Recent advances in pathogen detection and diagnosis of bacterial infections were discussed with focuses on the development of the SERS approaches and its applications in complex clinical settings.

KEY SCIENTIFIC CONCEPTS OF REVIEW

The current review describes bacterial classification using surface enhanced Raman spectroscopy (SERS) for developing a rapid and more accurate method for the identification of bacterial pathogens in clinical diagnosis. The initial part of this review gives a brief overview of the mechanism of SERS technology and development of the SERS approach to detect bacterial pathogens in complex samples. The development of the label-based and label-free SERS strategies and several novel SERS-compatible technologies in clinical applications, as well as the analytical procedures and examples of chemometric methods for SERS, are introduced. The computational challenges of pre-processing spectra and the highlights of the limitations and perspectives of the SERS technique are also discussed.Taken together, this systematic review provides an overall summary of the SERS technique and its application potential for direct bacterial diagnosis in clinical samples such as blood, urine and sputum, etc.

Correction for Extrinsic Background in Raman Hyperspectral Images

Raman hyperspectral microscopy is a valuable tool in biological and biomedical imaging. Because Raman scattering is often weak in comparison to other phenomena, prevalent spectral fluctuations and contaminations have brought advancements in analytical and chemometric methods for Raman spectra. These chemometric advances have been key contributors to the applicability of Raman imaging to biological systems. As studies increase in scale, spectral contamination from extrinsic background, intensity from sources such as the optical components that are extrinsic to the sample of interest, has become an emerging issue. Although existing baseline correction schemes often reduce intrinsic background such as autofluorescence originating from the sample of interest, extrinsic background is not explicitly considered, and these methods often fail to reduce its effects. Here, we show that extrinsic background can significantly affect a classification model using Raman images, yielding misleadingly high accuracies in the distinction of benign and malignant samples of follicular thyroid cell lines. To mitigate its effects, we develop extrinsic background correction (EBC) and demonstrate its use in combination with existing methods on Raman hyperspectral images. EBC isolates regions containing the smallest amounts of sample materials that retain extrinsic contributions that are specific to the device or environment. We perform classification both with and without the use of EBC, and we find that EBC retains biological characteristics in the spectra while significantly reducing extrinsic background. As the methodology used in EBC is not specific to Raman spectra, correction of extrinsic effects in other types of hyperspectral and grayscale images is also possible.

Identification of microplastic fibres released from COVID-19 test swabs with Raman imaging

Background

COVID-19 pandemic is not yet over, and it has been generating lots of plastic wastes that become a big concern. To catch the virus, for example, no matter via antigen or PCR test, swab is generally used for sampling. Unfortunately, the swab tip is commonly made of plastics, and thus it can be a potential source of microplastics. This study aims to propose and optimise several Raman imaging to identify the microplastic fibres released from different COVID-19 test swabs.

Results

The results show that Raman imaging can effectively identify and visualise the microplastic fibres released from the swabs. In the meantime, on the surface of the fibres, additives such as titanium oxide particles are also captured for some brands of swabs. To increase the result certainty, scanning electron microscope (SEM) is first employed to get the morphology of the released microplastic fibres, along with Energy-dispersive X-ray spectroscopy (EDS) to confirm the presence of titanium element. Then, Raman imaging is advanced to identify and visualise the microplastics and titanium oxide particles, from different characteristic peaks in the scanning spectrum matrix. To further increase the imaging certainty, these images can be merged and cross-checked using algorithms, or the raw data from the scanning spectrum matrix can be analysed and decoded via chemometrics, such as principal component analysis (PCA). Beyond the advantages, the disadvantages of the confocal Raman imaging (affected by focal height) and algorithms (non-supervised calculation) are also discussed and intentionally corrected. In brief, the imaging analysis (particularly the combined SEM with Raman) is recommended to avoid the possible result bias that might be generated from the single spectrum analysis at a selective but random position.

Conclusions

Overall, the results indicate that Raman imaging can be a useful tool to detect microplastics. The results also send us a strong warning that, if we worry about the potential microplastics contamination, we should be cautious to select the suitable COVID-19 testing kits.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12302-023-00737-0.

Machine Learning Spectroscopy Using a 2-Stage, Generalized Constituent Contribution Protocol

A corrected group contribution (CGC)-molecule contribution (MC)-Bayesian neural network (BNN) protocol for accurate prediction of absorption spectra is presented. Upon combination of BNN with CGC methods, the full absorption spectra of various molecules are afforded accurately and efficiently-by using only a small dataset for training. Here, with a small training sample (<100), accurate prediction of maximum wavelength for single molecules is afforded with the first stage of the protocol; by contrast, previously reported machine learning (ML) methods require >1,000 samples to ensure the accuracy of prediction. Furthermore, with <500 samples, the mean square error in the prediction of full ultraviolet spectra reaches <2%; for comparison, ML models with molecular SMILES for training require a much larger dataset (>2,000) to achieve comparable accuracy. Moreover, by employing an MC method designed specifically for CGC that properly interprets the mixing rule, the spectra of mixtures are obtained with high accuracy. The logical origins of the good performance of the protocol are discussed in detail. Considering that such a constituent contribution protocol combines chemical principles and data-driven tools, most likely, it will be proven efficient to solve molecular-property-relevant problems in wider fields.

Non-Perturbative Identification and Subtyping of Amyloidosis in Human Kidney Tissue with Raman Spectroscopy and Machine Learning

Amyloids are proteins with characteristic beta-sheet secondary structures that display fibrillary ultrastructural configurations. They can result in pathologic lesions when deposited in human organs. Various types of amyloid protein can be routinely identified in human tissue specimens by special stains, immunolabeling, and electron microscopy, and, for certain forms of amyloidosis, mass spectrometry is required. In this study, we applied Raman spectroscopy to identify immunoglobulin light chain and amyloid A amyloidosis in human renal tissue biopsies and compared the results with a normal kidney biopsy as a control case. Raman spectra of amyloid fibrils within unstained, frozen, human kidney tissue demonstrated changes in conformation of protein secondary structures. By using t-distributed stochastic neighbor embedding (t-SNE) and density-based spatial clustering of applications with noise (DBSCAN), Raman spectroscopic data were accurately classified with respect to each amyloid type and deposition site. To the best of our knowledge, this is the first time Raman spectroscopy has been used for amyloid characterization of ex vivo human kidney tissue samples. Our approach, using Raman spectroscopy with machine learning algorithms, shows the potential for the identification of amyloid in pathologic lesions.

Increased levels of nerve growth factor accompany oxidative load in recurrent pregnancy loss. Machine learning applied to FT-Raman spectra study

The presented article is focused on developing and validating an efficient, credible, minimally invasive technique based on spectral signatures of blood serum samples in patients with diagnosed recurrent pregnancy loss (RPL) versus healthy individuals who were followed at the Gynecology department. A total of 120 participants, RPL disease (n = 60) and healthy individuals (n = 60), participated in the study. First, we investigated the effect of circulating nerve growth factor (NGF) in RPL and healthy groups. To show NGF's effect, we measured the level of oxidative loads such as Total Antioxidant Level (TAS), Total Oxidant Level (TOS), and Oxidative Stress Index (OSI) with Beckman Coulter AU system and biochemical assays. We find a correlation between oxidative load and NGF level. Oxidative load mainly causes structural changes in the blood. Therefore, we obtained Raman measurements of the participant's serum. Then we selected two Raman regions, 800 and 1800 cm^-1, and between 2700 cm^-1 and 3000 cm^-1, to see chemical changes. We noted that Raman spectra obtained for RPL and healthy women differed. The findings confirm that the imbalance between reactive oxygen species and antioxidants has important implications for the pathogenesis of RPL and that NGF levels accompany the level of oxidative load in the RPL state. Biomolecular structure and composition were determined using Raman spectroscopy and machine learning methods, and the correlation of these parameters was studied alongside machine learning technologies to advance toward clinical translation. Here we determined and validated the development of instrumentation for the Analysis of RPL patients' serum that can differentiate from control individuals with an accuracy of 100% using the Raman region corresponding to structural changes. Furthermore, this study found a correlation between traditional biochemical parameters and Raman data. This suggests that Raman spectroscopy is a sensitive tool for detecting biochemical changes in serum caused by RPL or other diseases.

Machine Learning Identification of Organic Compounds Using Visible Light

Identifying chemical compounds is essential in several areas of science and engineering. Laser-based techniques are promising for autonomous compound detection because the optical response of materials encodes enough electronic and vibrational information for remote chemical identification. This has been exploited using the fingerprint region of infrared absorption spectra, which involves a dense set of absorption peaks that are unique to individual molecules, thus facilitating chemical identification. However, optical identification using visible light has not been realized. Using decades of experimental refractive index data in the scientific literature of pure organic compounds and polymers over a broad range of frequencies from the ultraviolet to the far-infrared, we develop a machine learning classifier that can accurately identify organic species based on a single-wavelength dispersive measurement in the visible spectral region, away from absorption resonances. The optical classifier proposed here could be applied to autonomous material identification protocols and applications.

Non-negative matrix factorisation of Raman spectra finds common patterns relating to neuromuscular disease across differing equipment configurations, preclinical models and human tissue

Raman spectroscopy shows promise as a biomarker for complex nerve and muscle (neuromuscular) diseases. To maximise its potential, several challenges remain. These include the sensitivity to different instrument configurations, translation across preclinical/human tissues and the development of multivariate analytics that can derive interpretable spectral outputs for disease identification. Nonnegative matrix factorisation (NMF) can extract features from high-dimensional data sets and the nonnegative constraint results in physically realistic outputs. In this study, we have undertaken NMF on Raman spectra of muscle obtained from different clinical and preclinical settings. First, we obtained and combined Raman spectra from human patients with mitochondrial disease and healthy volunteers, using both a commercial microscope and in-house fibre optic probe. NMF was applied across all data, and spectral patterns common to both equipment configurations were identified. Linear discriminant models utilising these patterns were able to accurately classify disease states (accuracy 70.2-84.5%). Next, we applied NMF to spectra obtained from the mdx mouse model of a Duchenne muscular dystrophy and patients with dystrophic muscle conditions. Spectral fingerprints common to mouse/human were obtained and able to accurately identify disease (accuracy 79.5-98.8%). We conclude that NMF can be used to analyse Raman data across different equipment configurations and the preclinical/clinical divide. Thus, the application of NMF decomposition methods could enhance the potential of Raman spectroscopy for the study of fatal neuromuscular diseases.