Acute toxicity assessment of polyaniline/Ag nanoparticles/graphene oxide quantum dots on Cypridopsis vidua and Artemia salina

Tetracycline: structural characterization and antimicrobial properties of its water-soluble di-anionic bi-sodium salt

The new water-soluble di-anionic bi-sodium salt of tetracycline (TC), an antibiotic in clinical use, with the formula {[TC]2-[Na+(MeOH)(H2O)] [Na+]·(H2O)}n (TCNa) was synthesized. The compound was characterized by m.p., attenuated total reflectance-Fourier transform infra-red (ATR-FTIR) spectroscopy, and ultraviolet (UV) and proton nuclear magnetic resonance (1H NMR) spectroscopy in the solid state and in solution. The molecular weight (MW) was determined by cryoscopy. The crystal structure of TCNa was also determined by X-ray crystallography. The antibacterial activity of TCNa was evaluated against the bacterial species Pseudomonas aeruginosa (P. aeruginosa), Escherichia coli (E. coli), Staphylococcus epidermidis (S. epidermidis) and Staphylococcus aureus (S. aureus) by means of minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and inhibition zones (IZs). Moreover, the ability of the compound to eradicate biofilm formation was also evaluated. The results are compared with those obtained for the commercially available drug TCH2. The in vitro and in vivo toxicities of TCNa were tested against human corneal epithelial cells (HCECs) and Artemia salina.

Anionic Hyperbranched Amphiphilic Polyelectrolytes as Nanocarriers for Antimicrobial Proteins and Peptides

This manuscript presents the synthesis of hyperbranched amphiphilic poly (lauryl methacrylate-co-tert-butyl methacrylate-co-methacrylic acid), H-P(LMA-co-tBMA-co-MAA) copolymers via reversible addition fragmentation chain transfer (RAFT) copolymerization of tBMA and LMA, and their post-polymerization modification to anionic amphiphilic polyelectrolytes. The focus is on investigating whether the combination of the hydrophobic characters of LMA and tBMA segments, as well as the polyelectrolyte and hydrophilic properties of MAA segments, both distributed within a unique hyperbranched polymer chain topology, would result in intriguing, branched copolymers with the potential to be applied in nanomedicine. Therefore, we studied the self-assembly behavior of these copolymers in aqueous media, as well as their ability to form complexes with cationic proteins, namely lysozyme (LYZ) and polymyxin (PMX). Various physicochemical characterization techniques, including size exclusion chromatography (SEC) and proton nuclear magnetic resonance (1H-NMR), verified the molecular characteristics of these well-defined copolymers, whereas light scattering and fluorescence spectroscopy techniques revealed promising nanoparticle (NP) self- and co-assembly properties of the copolymers in aqueous media.

Cyanide Removal by ZnTiO3/TiO2/H2O2/UVB System: A Theoretical-Experimental Approach

Cyanide is a highly toxic substance present in wastewater from various industries. This study investigates the removal of cyanide species (CS) from aqueous solutions using the ZnTiO3/TiO2/H2O2/UVB system. ZnTiO3/TiO2 nanoparticles synthesized by the sol-gel method were characterized by powder X-ray diffractometry (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The adsorption capacity of nanoparticles was tested by varying the pH of the solution, adsorbent concentration, and contact time. The adsorption of CS on ZnTiO3 and TiO2 surfaces was verified by Density Functional Theory (DFT) calculations. Photocatalytic experiments were achieved under UVB irradiation (λ = 310 nm). The response surface methodology (RSM) was used to optimize the CS removal efficiency. The detoxification effect was evaluated by acute toxicity tests with brine shrimp. The theoretical results show that the adsorption of CS is energetically more favorable on the ZnTiO3 surface than on the TiO2 surface. The experimental results show that the system consisting of ZnTiO3/TiO2 (200 mg L-1), H2O2 (0.1%), and UVB light removes 99% of CS from aqueous solutions after 60 min and reduces the mortality of nauplii in 90% after 90 min. This system was reused in five consecutive cycles with a total loss of efficiency of 30%.

An update on the biological effects of quantum dots: From environmental fate to risk assessment based on multiple biological models

Quantum dots (QDs) are zero-dimension nanomaterials with excellent physical and chemical properties, which have been widely used in environmental science and biomedicine. Therefore, QDs are potential to cause toxicity to the environment and enter organisms through migration and bioenrichment effects. This review aims to provide a comprehensive and systematic analysis on the adverse effects of QDs in different organisms based on recently available data. Following PRISMA guidelines, this study searched PubMed database according to the pre-set keywords, and included 206 studies according to the inclusion and elimination criteria. CiteSpace software was firstly used to analyze the keywords of included literatures, search for breaking points of former studies, and summarize the classification, characterization and dosage of QDs. The environment fate of QDs in the ecosystems were then analyzed, followed with comprehensively summarized toxicity outcomes at individual, system, cell, subcellular and molecular levels. After migration and degradation in the environment, aquatic plants, bacteria, fungi as well as invertebrates and vertebrates have been found to be suffered from toxic effects caused by QDs. Aside from systemic effects, toxicity of intrinsic QDs targeting to specific organs, including respiratory system, cardiovascular system, hepatorenal system, nervous system and immune system were confirmed in multiple animal models. Moreover, QDs could be taken up by cells and disturb the organelles, which resulted in cellular inflammation and cell death, including autophagy, apoptosis, necrosis, pyroptosis and ferroptosis. Recently, several innovative technologies, like organoids have been applied in the risk assessment of QDs to promote the surgical interventions of preventing QDs' toxicity. This review not only aimed at updating the research progress on the biological effects of QDs from environmental fate to risk assessment, but also overcame the limitations of available reviews on basic toxicity of nanomaterials by interdisciplinarity and provided new insights for better applications of QDs.

Individual and binary exposure to nanoscales of silver, titanium dioxide, and silicon dioxide alters viability, growth, and reproductive system: Hidden indices to re-establish artemia as a toxicological model in saline waters

This study evaluated and compared the individual and combined toxicity of AgNPs, TiO₂NPs, and SiO₂NPs to life cycle of A. salina. To this end, both stability and toxicity of AgNPs were determined in the presence of TiO₂NPs and SiO₂NPs. The colloidal stability of AgNPs decreased in the presence of the other two NPs, especially SiO₂NPs. AgNPs displayed acute toxicity to A. salina, whereas SiO₂NPs and TiO₂NPs chronically induced toxicity in a concentration- and time-dependent manner during 28-day exposure. The experimental NPs significantly decreased the weight and length of A. salina and induced reproductive toxicity through perturbation in first brood timespan, sexual maturity, egg development time, egg pouch area, offspring quality, and fecundity. Exposure to AgNPs shifted the mode of reproduction in brine shrimp from ovoviviparity to oviparity, and also co-presence of AgNPs with SiO₂NPs or TiO₂NPs caused infertility. Generally, their individual toxicity was in order of AgNPs > TiO₂NPs > SiO₂NPs, and binary exposure to AgNPs-SiO₂NPs appear to be more threatening than AgNPs-TiO₂NPs to A. salina. Together, this study highlights that these nanoparticles could disrupt reproductive health of A. salina and lead to alterations in population dynamics and aquatic ecosystem balance.

Recent advances in nanomaterials based sustainable approaches for mitigation of emerging organic pollutants

Emerging organic pollutants (EOPs) are a category of pollutants that are relatively new to the environment and recently garnered a lot of attention. The majority of EOPs includes endocrine-disrupting chemicals (EDCs), antibiotic resistance genes (ARGs), pesticides, dyes and pharmaceutical and personal care products (PPCPs). Exposure to contaminated water has been linked to an increase in incidences of malnutrition, intrauterine growth retardation, respiratory illnesses, liver malfunctions, eye and skin diseases, and fatalities. Consequently, there is a critical need for wastewater remediation technologies which are effective, reliable, and economical. Conventional wastewater treatment methods have several shortcomings that can be addressed with the help of nanotechnology. Unique characteristics of nanomaterials (NMs) make them intriguing and efficient alternative in wastewater treatment strategies. This review emphasis on the occurrence of divers emerging organic pollutants (EOPs) in water and their effective elimination via different NMs based methods with in-depth mechanisms. Furthermore, it also delves the toxicity assessment of NMs and critical challenges, which are crucial steps for practical implementations.

New Apoptosis Inducers Containing Anti-inflammatory Drugs and Pnictogen Derivatives: A New Strategy in the Development of Mitochondrial Targeting Chemotherapeutics

{[Ag₈(Mef)₈(μ₂-S,O-DMSO)₂(μ₂-O-DMSO)₂(O-DMSO)₈]·2(H₂O)} (1), [Ag(Mef)(tpP)₂] (2), [Ag(Mef)(tpAs)₃] (3), and {2 [Ag(Mef)(tpSb)₃] (DMSO)} (4) were obtained by the conjugation of mefenamic acid (MefH), a nonsteroidal anti-inflammatory drug (NSAID), with a mitochondriotropic derivative of pnictogen tpE (tp = triphenyl group; E = P, As, and Sb) through silver(I). Their hydrophilicity was adjusted by their dispersion into sodium lauryl sulfate (SLS), forming SLS@1-4. 1-4 and SLS@1-4 were characterized by their spectral data and X-ray crystallography. They inhibit the proliferation of human breast adenocarcinoma cells MCF-7 (hormone-dependent (HD)) and MDA-MB-231 (hormone-independent (HI)). X-ray fluorescence reveals the Ag cellular uptake. The in vitro and in vivo nongenotoxicity was confirmed with micronucleus (MN), Artemia salina, and Allium cepa assays. Their mechanism of action was studied by cell morphology, DNA fragmentation, acridine orange/ethidium bromide (AO/EB) staining, cell cycle arrest, mitochondrial membrane permeabilization tests, DNA binding affinity, and LOX inhibitory activity and was rationalized by regression analysis.

Garlic capped silver nanoparticles for rapid detection of cholesterol

A fluorescent biosensor based on garlic (Allium sativum L.) capped Ag nanoparticles (G-Ag NPs) has been synthesized for cholesterol detection. Pristine Ag NPs and G-Ag NPs were synthesized through the chemical reduction process. The effect of different capping agents such as 3-aminopropyltriethoxysilane (APTS), glutathione, 8-hydroxyquinoline, garlic/APTS, garlic/glutathione, and garlic/8-hydroxyquinoline on Ag NPs was evaluated. These NPs were characterized using Fourier transform infrared (FTIR), energy-dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HRTEM), X-Ray diffraction (XRD), UV-visible spectra, and Zeta potential. The HRTEM micrographs illustrated that Ag NPs with particles size ranging from 2.98 to 14.34 nm were aggregated. G-Ag NPs images showed uniformly distributed spherical particles with particles size from 4.52 to 12.8 nm. The reduction in the plasmonic bands of Ag NPs and G-Ag NPs occurred by 96.4% and 11.7%, respectively after 12 months. The developed sensor for cholesterol based on the fluorescence enhancement had a linear response in a concentration range of 0.4-5.17 mM with a sensitivity of 4.36 Mm^-1 and a limit of detection of 0.186 mM. The high selectivity toward cholesterol in presence of different interferes such as glucose, cysteine, glycine, urea, sucrose, nickel, and copper, and their mixture was evaluated. The applicability of this developed sensor for real serum samples was detected with a recovery percentage from 99.1 to 101.3%. Repeatability and reproducibility experiments displayed relative standard deviations (RSD) of 0.88% and 0.62%, respectively.

Genotoxicity in Artemia spp.: An old model with new sensitive endpoints

Artemia spp. represent models species widely used in ecotoxicological studies due to its simple and fast manipulation in laboratory conditions that makes this crustacean well adaptable to several methodological approaches. Although cysts hatching, swimming behavior, reproductive success and mortality are the main endpoints used for the determination of toxicity, the detection of slight alterations induced by certain substances found at low concentrations in the environment may require more sensitive biomarkers. For this reason, the identification of DNA or chromosomal damages has been proposed as an additional and appreciable endpoint for the ecotoxicological assessment of environmental chemicals. Concerning Artemia models, only few studies indicated that the exposure to organic and inorganic compounds (i.e. pesticides, nanoparticles, bacterial products or heavy metals) can reduce the survival and fitness through the onset of DNA breaks or the dysregulation of key genes. In contrast, literature research revealed a lot of works primarily focusing on the mortality and hatching rates of Artemia nauplii and cysts despite the well-known low sensitivity of these species. The present review reports the current state of knowledge concerning the effects induced by various chemicals, including organic and inorganic compounds, on the common parameters and genotoxicity in both Artemia franciscana and Artemia salina. Advantages and limitations of Artemia spp. models in eco-toxicological investigations together with the most used classes of compounds are briefly discussed. Moreover, a mention is also addressed to scarce availability of literature data focusing on genotoxic effects and the great reliability of molecular approaches observed in this poorly sensitive model organism. Thus, the opportunity to take advantage of genotoxic analyses has also been highlighted, by suggesting this approach as a novel endpoint to be used for the eco-toxicological assessment of several stressors.

A robust electrochemical sensing platform for the detection of erlotinib based on nitrogen-doped graphene quantum dots/copper nanoparticles-polyaniline-graphene oxide nanohybrid

Erlotinib is a potent and highly specific tyrosine kinase inhibitor with the hindering effects on the growth of cancer cells. An electrochemical sensor with the great sensitivity and selectivity was fabricated for determining erlotinib by using a graphite rod electrode modified by the nitrogen-doped graphene quantum dots (N-GQDs) and a ternary nanohybrid comprising copper nanoparticles, polyaniline, along with graphene oxide (N-GQDs/CuNPs-PANI@GO) for the first time. The establishment of PANI and CuNPs was done simultaneously on the GO surface by thein situoxidative polymerization method. The morphological characteristics and elemental structure of the synthesized nanoparticles were examined by some microscopy techniques and x-ray energy/diffraction methods. The fabricated sensor represented the electrocatalytic activity towards erlotinib with a linear detection range from 1.0 nM to 35.0μM, a detection limit of 0.712 nM, and a sensitivity of 1.3604μAμM^-1. Moreover, the N-GQDs/CuNPs-PANI@GO sensor showed acceptable stability up to 30 d (94.82%), reproducibility (RSD values of 3.19% intraday and 3.52% interday), and repeatability (RSD value of 3.65%) as a novel and powerful electrochemical sensor. It was successfully applied to monitor erlotinib in the drug-injected aqueous solution, serum, and urine samples that proved the capability of the sensor for the erlotinib monitoring in the biological samples.

Design of fluorescent method for sensing toxic diazinon in water samples using PbS quantum dots-based gelatin

In this current article, a chemical sensor was synthesized PbS functionalized with gelatin quantum dots for toxic diazinon. The measure of toxic diazinon was performed using concentration 0.5 µM, PbS quantum dot-gelatin nanocomposites sensor, pH 6, and time 50 s, wavelength 300 nm, in phosphate buffer solution. Under the optimum conditions, the detection limit linear range was obtained (0.01-20.0 µg L^-1). The standard deviation of less than (1.0%), and detection limits (3S/m) of the method (0.01 µg L^-1) and quantification (LOQ) of (0.099 µg L^-1), for determination of toxic diazinon, was obtained. The observed outcomes confirmed the suitability recovery and a very low detection limit for measuring the toxic diazinon. The Chemical PbS Quantum Dot-Gelatin nanocomposites sensor as excellent sensor was applied to measure and analyze residue toxic diazinon in water samples.

Supercapacitor based on polymeric binary composite of polythiophene and single-walled carbon nanotubes

The aim of this work is to fabricate supercapacitor electrode based on poly (3-hexyl-thiophene-2, 5-diyl) (P3HT) and single-walled carbon nanotubes (SWCNTs) nanocomposites with different ratios onto a graphite sheet as a substrate with a wide voltage window in nonaqueous electrolyte. Structural, morphological and electrochemical properties of the prepared nanocomposites of P3HT/SWCNTs were studied and discussed. The electrochemical properties included cyclic voltammetry (CV), galvanostatic charging-discharging (GCD), and electrochemical impedance spectroscopy (EIS) were investigated. The obtained results indicated that P3HT/SWCNTs nanocomposite possesses higher specific capacitance than that present in its individual component. The high electrochemical performance of the nanocomposite was due to formation of microporous structure which facilitates ions diffusion and electrolyte penetration in these pores. The morphological micrographs of the purified SWCNTs had buckypaper structure while the photomicrographs of P3HT/SWCNTs showed that SWCNTs appear behind and front of the P3HT nanospheres. The specific capacitance of 50% SWCNTs at 0.5 Ag⁻¹ was found to be 245.8 Fg⁻¹ compared with that of pure P3HT of 160.5 Fg⁻¹.

Mycobacterium abscessus: insights from a bioinformatic perspective

Mycobacterium abscessus is a nontuberculous mycobacterium, associated with broncho-pulmonary infections in individuals suffering from cystic fibrosis, bronchiectasis, and pulmonary diseases. The risk factors for transmission include biofilms, contaminated water resources, fomites, and infected individuals. M. abscessus is extensively resistant to antibiotics. To date, there is no vaccine and combination antibiotic therapy is followed. However, drug toxicities, low cure rates, and high cost of treatment make it imperfect. Over the last 20 years, bioinformatic studies on M. abscessus have advanced our understanding of the pathogen. This review integrates knowledge from the analysis of genomes, microbiomes, genomic variations, phylogeny, proteome, transcriptome, secretome, antibiotic resistance, and vaccine design to further our understanding. The utility of genome-based studies in comprehending disease progression, surveillance, tracing transmission routes, and epidemiological outbreaks on a global scale has been highlighted. Furthermore, this review underlined the importance of using computational methodologies for pinpointing factors responsible for pathogen survival and resistance. We reiterate the significance of interdisciplinary research to fight M. abscessus. In a nutshell, the outcome of computational studies can go a long way in creating novel therapeutic avenues to control M. abscessus mediated pulmonary infections.

Effects of one-dimensional nanomaterial polyaniline nanorods on earthworm biomarkers and soil enzymes

Polyaniline nanorods (PANRs) are typical one-dimensional nanomaterials (1D NMs), which are widely used in medicine, batteries and water treatment, etc. Applications of PANRs will eventually enter the soil environment, but their ecotoxicity has been barely reported. Therefore, we measured earthworm biomass, earthworm biomarkers and soil enzymes to investigate the ecotoxicity of PANRs. The result of positive and increasing growth inhibition rates (GIR) showed that PANRs inhibited earthworm growth. As for earthworm biomarkers, PANRs caused a decrease in protein content, indicating that PANRs stress would increase earthworm energy consumption. Except for the 7th day, the activities of SOD, CAT and POD consistently increased, suggesting that PANRs activated the earthworm antioxidant system. The continually augment of MDA content indicated that PANRs stress would cause earthworm lipid damage. Na⁺-K⁺-ATPase increased with an excellent dose-time relationship. Differently, cellulase and AChE activities promoted at low concentrations and inhibited at high concentrations. The positive and dose-dependent IBRv2 indicated that the higher the concentrations of PANRs, the greater the ecotoxicity to earthworms. PANRs inhibited the soil enzyme activities such as sucrase, neutral phosphatase, protease and urease, while induced catalase activity in a dose-dependent manner. Earthworm addition reduced catalase activity by 10.74-29.99%, but improved other soil enzymes activities, demonstrating that earthworms played a positive role in regulating soil enzyme activity. GMean and T-SQI consistently increased due to earthworm activity, meaning a higher soil microbial functional diversity. Generally, this study provided data support for future PANRs toxicity studies, but their toxicity mechanisms still need to be further studied.

Enhanced fluorescent sensing probe via PbS quantum dots functionalized with gelatin for sensitive determination of toxic bentazon in water samples

Fluorescent chemical sensors to detect materials, by increasing fluorescence emission and absorption or by shutting down, because they are nondestructive, the ability to show decomposed concentrations, fast response, high accuracy have been considered and used. In this research, a chemical sensor was synthesized PbS functionalized with gelatin quantum dots for the determination of toxic bentazon (BTZN) one of the most problematic pesticides polluting in water samples, and extremely harmful to humans and animals even at low concentrations. The calibration curve was linear in the range of (0.05 to 200.0 ng mL^-1). The current response was linearly proportional to the BTZN concentration with a R²∼ 0.999. The standard deviation of less than (3%), and detection limits (3S/m) of the method (0.5 ng mL^-1, in time 50 s, 325 nm) were obtained for sensor level response PbS Quantum Dot-Gelatin nanocomposites sensor with (99%) which is below the U.S. Health Advisory level. The observed outcomes confirmed the suitability recovery and a very low detection limit for measuring the BTZN. The method fluorometric introduced to measure BTZN in water samples was used and can be used for in different intricate matrices, the chemical PbS Quantum Dot-Gelatin nanocomposites sensor made it possible as an excellent sensor with good reproducibility.

Superhydrophobic functionalized cellulosic paper by copper hydroxide nanorods for oils purification

Oily water contamination has been sighted as one of the most global environmental pollution. Herein, copper hydroxide nanorods layer was constructed onto cellulosic filter paper surface cured with polydopamine, Ag nanoparticles, and Cu NPs through immersion method. This work has been aimed to produce a superhydrophobic and superoleophilic cellulosic filter paper. The structure, crystalline, and morphological properties of these modified cellulosic filter paper were investigated. Scanning electron microscope images confirmed that the modified surface was rougher compared with the pristine surface. The contact angle measurement confirmed the hydrophobic nature of these modified surfaces with a water contact angle of 169.7°. The absorption capacity was 8.2 g/g for diesel oil and the separation efficiency was higher than 99%. It was noted that the flux in the case of low viscosity solvent as n-hexane was 9663.5 Lm-2 h-1, while for the viscous oil as diesel was 1452.7 Lm-2 h-1.