Cooperative CO2-to-ethanol conversion via enriched intermediates at molecule–metal catalyst interfaces

Metal-organic framework-derived silver/copper-oxide catalyst for boosting the productivity of carbon dioxide electrocatalysis to ethylene

Electrochemical reduction of CO2 into valuable multi-carbon (C2) chemicals holds promise for mitigating CO2 emissions and enabling artificial carbon cycling. However, achieving high selectivity remains challenging due to the limited activity and active sites of CC coupling catalysts. Herein, we report an Ag-modified Cu-oxide catalyst (CuO/Ag@C) derived from metal-organic frameworks (MOF), capable of efficiently converting CO2 to C2H4. The MOF-derived porous carbon confines the size of metal nanoparticles, ensuring sufficient exposure of active sites. Remarkably, the CuO/Ag@C catalyst achieves an impressive Faradaic efficiency of 48.6% for C2H4 at -0.7 V vs. RHE, demonstrating excellent stability. Both experimental results and theoretical calculations indicate that Ag sites promote the production of CO, enhancing the coverage of *CO on Cu sites. Furthermore, the reconfiguration of charge density at the Cu-Ag interface optimizes the electronic states of the reaction sites, reducing the formation energy of the key intermediate *OCCHO, thereby favoring C2H4 production effectively. This work provides insight into structurally rational catalyst design for highly active and selective multiphase catalysts.

Electrocatalytic Mapping of Metal Fatigue with Persistent Slip Bands

Metal fatigue, characterized by the accumulation of dislocation defects, is a prevalent failure mode in structural materials. Nondestructive early-stage detection of metal fatigue is extremely important to prevent disastrous events and protect human life. However, the lack of a precise quantitative method to visualize fatigue with spatiotemporal resolution poses a significant obstacle to timely detection. Here, we demonstrate a nondestructive electrocatalytic method to visualize metal fatigue, which is promising for future fatigue early detections. The persistent slip band (PSB) is considered one of the most consequential defect structures for metal fatigue failure. The selective electrochemistry is highly dependent on the metal crystallography and the collective dislocations in the PSB structure, enabling the amplification of the electrochemical response and differentiation of the fatigue stages at a submillimeter resolution. In addition, this nondestructive electrocatalytic method is applicable to several common metals, including copper, silver, iron, and aluminum, holding great significance where metal fatigue is a critical concern.

Establishment of Gas-Liquid-Solid Interface on Multilevel Porous Cu2O for Potential-Driven Selective CO2 Electroreduction toward C1 or C2 Products

Copper-based catalysts demonstrate distinctive multicarbon product activity in the CO2 electroreduction reaction (CO2RR); however, their low selectivity presents significant challenges for practical applications. Herein, we have developed a multilevel porous spherical Cu2O structure, wherein the mesopores are enriched with catalytic active sites and effectively stabilize Cu+, while the macropores facilitate the formation of a "gas-liquid-solid" three-phase interface, thereby creating a microenvironment with an increasing water concentration gradient from the interior to the exterior. Potential-driven phase engineering and protonation synergistically optimize the reaction pathway, facilitating a switch between CO and C2H4. At a low current density of 100 mA cm-2, the faradaic efficiency (FE) for CO reaches an impressive 96.97%. When the current density increases to 1000 mA cm-2, FEC2H4 attains 53.05%. Experiments and theoretical calculations indicate that at lower potentials, the pure Cu2O phase diminishes the adsorption of *CO intermediates, while weak protonation inhibits hydrogen evolution reactions, thereby promoting CO production. Conversely, at more negative potentials, the Cu0/Cu+ interface and strong protonation generate locally elevated concentrations of *CO and *COOH intermediates, which enhance C-C coupling and deep hydrogenation, ultimately improving selectivity toward C2+ products. This study provides novel insights into the rational design of copper-based catalysts for customizable CO2 electroreduction products.

Solvent Mediated Interfacial Microenvironment Design for High-Performance Electrochemical CO2 Reduction to C2+ Products

Electrochemical CO2 reduction (CO2RR) in membrane electrode assembly (MEA) represents a viable strategy for converting CO2 into value-added multi-carbon (C2+) compounds. Therefore, the microstructure of the catalyst layer (CL) affects local gas transport, charge conduction, and proton supply at three-phase interfaces, which is significantly determined by the solvent environment. However, the microenvironment of the CLs and the mechanism of the solvent effect on C2+ selectivity remains elusive. Herein, a tailored interfacial structure is designed by introducing a solvent-mediated catalyst-ionomer-solvent microenvironment. The acetone surface promotion strategy is beneficial for the unfolded ionomers to uniformly coat the catalysts, which contributes to enhancing interfacial hydrophobicity and inhibiting hydrogen evolution. Furthermore, molecular dynamics (MD) simulation and in situ ATR-SEIRAS are employed to elucidate the appropriate interfacial network with a balanced distribution of CO2 and H2O. The uniform and continuous network in acetone is advantageous for CO2-to-C2+. The optimized structure favors the production of C2+ products in Cu-based MEA, exhibiting a high C2+ faradaic efficiency (FE) of 80.27% at 400 mA cm-2.

Cr-MOF composited with facet-engineered bimetallic alloys for inducing photocatalytic conversion of CO2 to C2H4

The design of efficient photocatalysts is crucial for photocatalytic CO2 reduction. This study developed photocatalysts based on MIL-101(Cr) composited with a facet-engineered Pt/Pd nanoalloy (PPNA). Photocatalytic performance evaluations show that MIL-101(Cr) loaded with PPNA exposing {111} facets, namely M-A(111), exhibits a CO2 to C2H4 conversion rate of 9.5 μmol g-1 h-1 in addition to the CO and CH4, whereas M-A(100) with PPNA exposing {100} facets gives CO2 conversion rates of 33.2 for CO and 9.3 μmol g-1 h-1 for CH4 without C2H4. In situ FT-IR revealed that M-A(111) can readily form C2 intermediates during the reaction. This work offers a strategy for the design of photocatalysts for CO2 reduction to C2H4.

Interfacial Oxygen Vacancy-Copper Pair Sites on Inverse CeO2/Cu Catalyst Enable Efficient CO2 Electroreduction to Ethanol in Acid

Renewable electricity-driven electrochemical reduction of CO2 offers a promising route for the production of high-value ethanol. However, the current state of this technology is hindered by low selectivity and productivity, primarily due to a limited understanding of the atomic-level active sites involved in ethanol formation. Herein, we identify that the interfacial oxygen vacancy-neighboring Cu (Ov-Cu) pair sites are the active sites for CO2 electroreduction to ethanol. A linear correlation between the density of Ov-Cu pair sites and ethanol productivity is experimentally evidenced. Moreover, a high Faradaic efficiency of 48.5 % and a partial current density of 344.0 mA cm-2 for ethanol production are achieved over the inverse CeO2/Cu catalyst with a high density of Ov-Cu pair sites in acid. Mechanistic studies that combine density functional theory calculations and spectroscopic techniques propose an Ov-involved mechanism where interfacial Ov sites directly activate and dissociate CO2 into *CO in a thermodynamically spontaneous manner, thus favoring the subsequent *CHO formation and asymmetric CHO-CO coupling. Besides, the asymmetric Ov-Cu pair sites could preferentially stabilize the *CH2CHOH intermediate, resulting in the favorable formation of ethanol over ethylene. Our findings provide new atomic-level insights into CO2 electroreduction to ethanol, paving the way for the rational design of future catalysts.

Switching CO2 Electroreduction Pathways between Ethylene and Ethanol via Tuning Microenvironment of the Coating on Copper Nanofibers

Engineering the microenvironment of electrode surface is one of the effective means to tune the reaction pathways in CO2RR. In this work, we prepared copper nanofibers with conductive polypyrrole coating by polymerization of pyrrole using polyvinyl pyrrolidone (PVP) as template. As a result, the obtained copper nanofibers Cu/Cu2+1O/SHNC, exhibited a superhydrophobic surface, which demonstrated very high selectivity for ethanol with a Faraday efficiency (FE) of 66.5 % at -1.1 V vs reversible hydrogen electrode (RHE) in flow cell. However, the catalyst Cu/Cu2+1O/NC, which was prepared under the same conditions but without PVP, possessed a hydrophobic surface and exhibited high selectivity towards ethylene at the given potentials. The mechanism for switch of reaction pathways from ethylene to ethanol in CO2RR was studied. Incorporating pyrrolidone groups into the polymer coating results in the formation of a superhydrophobic surface. This surface weakens the hydrogen bonding interaction between interfacial water molecules and facilitates the transfer of CO2, thereby enhancing the local CO2/H2O ratio. The high coverage of *CO promotes the coupling of *CO and *CHO to form C2 intermediates, and reduces the reaction energy for the formation of *CHCHOH (ethanol path) at the interface. This ensures that the reaction pathway is directed towards ethanol.

Nickel-Doped Facet-Selective Copper Nanowires for Activating CO-to-Ethanol Electrosynthesis

Ethanol isa promising energy vector for closing the anthropogenic carbon cycle through reversible electrochemical redox. Currently, ethanol electrosynthesissuffers from low product selectivity due to the competitive advantage of ethylene in CO2/CO electroreduction. Here, a facet-selective metal-doping strategy is reported, tuning the reaction kinetics of CO reduction paths and thus enhancing the ethanol selectivity. The theoretical calculations reveal that nickel (Ni)doped Cu(100) surface facilitates water dissociation to form adsorbed hydrogen, which promotesselective electrochemical hydrogenation of a key C2 intermediate (*CHCOH) toward ethanol path over ethylene path. Experimentally, a solution-phase synthesis of a Ni-doped {100}-dominated Copper nanowires (Cu NWs) catalyst is reported, enabling an ethanol Faradaic efficiency of 56% and a selectivity ratio of ethanol to ethylene of 2.7, which are ≈4 and 15 times larger than those of undoped Cu NWs, respectively. The operando spectroscopic characterizations confirm that Ni-doping in Cu NWs can alter the interfacial water activity and thus regulate the C2 product selectivity. With further electrode engineering, a membrane electrode assembly electrolyzer using Ni-doped Cu NWs catalysts demonstrates an ethanol Faradaic efficiency over 50% at 300 mA cm-2 with a full cell voltage of ≈2.7 V and operates stably for over 300 h.

Promoting CO Electroreduction to C2+ Oxygenates by Distribution of Water Dissociation Sites

The electrocatalytic CO2 or CO reduction reaction is a complex proton-coupled electron transfer reaction, in which protons in the electrolyte have a critical effect on the surface adsorbed *H species and the multi-carbon oxygenate products such as ethanol. However, the coupling of *H and carbon-containing intermediates into C2+ oxygenates can be severely hampered by the inappropriate distributions of those species in the catalytic interfaces. In this work, the controlled distribution of highly dispersed CeOx nanoclusters is demonstrated on Cu nanosheets as an efficient CO electroreduction catalyst, with Faradaic efficiencies of ethanol and total oxygenates of 35% and 58%, respectively. The CeOx nanoclusters (2-5 nm) enabled efficient water dissociation and appropriate distribution of adsorbed *H species on the Cu surface with carbon-containing species, thus facilitating the generation of C2+ oxygenate products. In contrast, pristine Cu without CeOx tended to form ethylene, while the aggregated CeOx nanoparticles promoted the surface density of *H and subsequent H2 evolution.

Mechanism of oxygen vacancy engineering CoOX/Fe3O4 regulated electrocatalytic reduction of nitrate to ammonia

To enhance the activity of the nitrate reduction reaction (NO3-RR), the development of oxygen vacancies electrocatalysts is a promising approach for improving the efficiency of ammonia synthesis. However, the mechanism by which oxygen vacancies regulate NO3-RR to ammonia remains poorly understood. In this study, a series of CoOX/Fe3O4 composite catalysts derived from ZIF-67 containing oxygen vacancies (OVs) were synthesized to elucidate the role of OVs on the activity and selectivity of ammonia synthesis. Structural characterization revealed that the concentration of OVs in the catalysts increased with the addition of iron ions. Electrochemical experiments and theoretical calculations demonstrated that OVs promote interfacial electron transfer, alter the adsorption conformation of NO3* on the catalyst surface, and reduce the activation energy barrier of NO3*. Nonetheless, we observed that high concentrations of OVs exhibited a preference for the product NO2- at high potentials, which we attribute to the strong adsorption of NO* by the OVs, impeding the subsequent hydrogenation process. Additionally, electron paramagnetic resonance (EPR) and activated hydrogen (H*) quenching experiments indicated that the catalyst was unable to deliver substantial amounts of H* in the buffered electrolyte, resulting in low ammonia productivity. The ammonia Faraday current efficiency (FE) of CoOX/Fe3O4-90 in 0.1 M KOH and 0.1 M NO3- was 82.22 %, with an ammonia production rate of 1.09 mmol h-1 cm-2.

Regulating Interfacial Hydrogen-Bonding Networks by Implanting Cu Sites with Perfluorooctane to Accelerate CO2 Electroreduction to Ethanol

Efficient CO2 electroreduction (CO2RR) to ethanol holds promise to generate value-added chemicals and harness renewable energy simultaneously. Yet, it remains an ongoing challenge due to the competition with thermodynamically more preferred ethylene production. Herein, we presented a CO2 reduction predilection switch from ethylene to ethanol (ethanol-to-ethylene ratio of ~5.4) by inherently implanting Cu sites with perfluorooctane to create interfacial noncovalent interactions. The 1.83 %F-Cu2O organic-inorganic hybrids (OIHs) exhibited an extraordinary ethanol faradaic efficiency (FEethanol) of ∼55.2 %, with an impressive ethanol partial current density of 166 mA cm-2 and excellent robustness over 60 hours of continuous operation. This exceptional performance ranks our 1.83 %F-Cu2O OIHs among the best-performing ethanol-oriented CO2RR electrocatalysts. Our findings identified that C8F18 could strengthen the interfacial hydrogen bonding connectivity, which consequently promotes the generation of active hydrogen species and preferentially favors the hydrogenation of *CHCOH to *CHCHOH, thus switching the reaction from ethylene-preferred to ethanol-oriented. The presented investigations highlight opportunities for using noncovalent interactions to tune the selectivity of CO2 electroreduction to ethanol, bringing it closer to practical implementation requirements.

Enhancing CO2 Electroreduction Precision to Ethylene and Ethanol: The Role of Additional Boron Catalytic Sites in Cu-Based Tandem Catalysts

The electrocatalytic conversion of carbon dioxide (CO2) into valuable multicarbon (C2+) compounds offers a promising approach to mitigate CO2 emissions and harness renewable energy. However, achieving precise selectivity for specific C2+ products, such as ethylene and ethanol, remains a formidable challenge. This study shows that incorporating elemental boron (B) into copper (Cu) catalysts provides additional adsorption sites for *CO intermediates, enhancing the selectivity of desirable C2+ products. Additionally, using a nickel single-atom catalyst (Ni-SAC) as a *CO source increases local *CO concentration and reduces the hydrogen evolution reaction. In situ experiments and density functional theory (DFT) calculations reveal that surface-bound boron units adsorb and convert *CO more efficiently, promoting ethylene production, while boron within the bulk phase of copper influences charge transfer, facilitating ethanol generation. In a neutral electrolyte, the bias current density for ethylene production using the B-O-Cu2@Ni-SAC0.05 hybrid catalyst exceeded 300 mA cm-2, and that for ethanol production with B-O-Cu5@Ni-SAC0.2 surpassed 250 mA cm-2. This study underscores that elemental doping in Cu-based catalysts not only alters charge and crystalline phase arrangements at Cu sites but also provides additional reduction sites for coupling reactions, enabling the efficient synthesis of distinct C2+ products.

Advances in the Catalytic Conversion of Ethanol into Nonoxygenated Added-Value Chemicals

Given that ethanol can be obtained from abundant biomass resources (e.g., crops, sugarcane, cellulose, and algae), waste, and CO2, its conversion into value-added chemicals holds promise for the sustainable production of high-demand chemical commodities. Nonoxygenated chemicals, including light olefins, 1,3-butadiene, aromatics, and gasoline, are some of the most important of these commodities, substantially contributing to modern lifestyles. Despite the industrial implementation of some ethanol-to-hydrocarbons processes, several fundamental questions and technological challenges remain unaddressed. In addition, the utilization of ethanol as an intermediate provides new opportunities for the direct valorization of CO and CO2. Herein, the recent advances in the design of ethanol conversion catalysts are summarized, providing mechanistic insights into the corresponding reactions and catalyst deactivation, and discussing the related future research directions, including the exploitation of active site proximity to achieve better synergistic effects for reactions involving ethanol.

Manipulating C-C coupling pathway in electrochemical CO2 reduction for selective ethylene and ethanol production over single-atom alloy catalyst

Manipulation C-C coupling pathway is of great importance for selective CO2 electroreduction but remain challenging. Herein, two model Cu-based catalysts, by modifying Cu nanowires with Ag nanoparticles (AgCu NW) and Ag single atoms (Ag1Cu NW), respectively, are rationally designed for exploring the C-C coupling mechanisms in electrochemical CO2 reduction reaction (CO2RR). Compared to AgCu NW, the Ag1Cu NW exhibits a more than 10-fold increase of C2 selectivity in CO2 reduction to ethanol, with ethanol-to-ethylene ratio increased from 0.41 over AgCu NW to 4.26 over Ag1Cu NW. Via a variety of operando/in-situ techniques and theoretical calculation, the enhanced ethanol selectivity over Ag1Cu NW is attributed to the promoted H2O dissociation over the atomically dispersed Ag sites, which effectively accelerated *CO hydrogenation to form *CHO intermediate and facilitated asymmetric *CO-*CHO coupling over paired Cu atoms adjacent to single Ag atoms. Results of this work provide deep insight into the C-C coupling pathways towards target C2+ product and shed light on the rational design of efficient CO2RR catalysts with paired active sites.

Electrochemical CO2 Reduction Reaction: Comprehensive Strategic Approaches to Catalyst Design for Selective Liquid Products Formation

The escalating concern regarding the release of CO2 into the atmosphere poses a significant threat to the contemporary efforts in mitigating climate change. Amidst a multitude of strategies for curtailing CO2 emissions, the electrochemical CO2 reduction presents a promising avenue for transforming CO2 molecules into a diverse array of valuable gaseous and liquid products, such as CO, CH3OH, CH4, HCO2H, C2H4, C2H5OH, CH3CO2H, 1-C3H7OH and others. The mechanistic investigations of gaseous products (e. g. CO, CH4, C2H4, C2H6 and others) broadly covered in the literature. There is a noticeable gap in the literature when it comes to a comprehensive summary exclusively dedicated to coherent roadmap for the designing principles for a selective catalyst all possible liquid products (such as CH3OH, C2H5OH, 1-C3H7OH, 2-C3H7OH, 1-C4H9OH, as well as other C3-C4 products like methylglyoxal and 2,3-furandiol, in addition to HCO2H, AcOH, oxalic acid and others), selectively converted by CO2 reduction. This entails a meticulous analysis to justify these approaches and a thorough exploration of the correlation between materials and their electrocatalytic properties. Furthermore, these insightful discussions illuminate the future prospects for practical applications, a facet not exhaustively examined in prior reviews.

Cascade Catalytic Systems for Converting CO2 into C2+ Products

The excessive emission and continuous accumulation of CO2 have precipitated serious social and environmental issues. However, CO2 can also serve as an abundant, inexpensive, and non-toxic renewable C1 carbon source for synthetic reactions. To achieve carbon neutrality and recycling, it is crucial to convert CO2 into value-added products through chemical pathways. Multi-carbon (C2+) products, compared to C1 products, offer a broader range of applications and higher economic returns. Despite this, converting CO2 into C2+ products is difficult due to its stability and the high energy required for C-C coupling. Cascade catalytic reactions offer a solution by coordinating active components, promoting intermediate transfers, and facilitating further transformations. This method lowers energy consumption. Recent advancements in cascade catalytic systems have allowed for significant progress in synthesizing C2+ products from CO2. This review highlights the features and advantages of cascade catalysis strategies, explores the synergistic effects among active sites, and examines the mechanisms within these systems. It also outlines future prospects for CO2 cascade catalytic synthesis, offering a framework for efficient CO2 utilization and the development of next-generation catalytic systems.

Preserving Molecular Tuning for Enhanced Electrocatalytic CO2-to-Ethanol Conversion

Modifying catalyst surface with small molecular-additives presents a promising avenue for enhancing electrocatalytic performance. However, challenges arise in preserving the molecular-additives and maximizing their tuning effect, particularly at high current densities. Herein, we develop an effective strategy to preserve the molecular-additives on electrode surface by applying a thin protective layer. Taking 4-dimethylaminopyridine (DMAP) as an example of a molecular-additive, the hydrophobic protection layer on top of the DMAP-functionalized Cu-catalyst effectively prevents its leaching during CO2 electroreduction (CO2R). Consequently, the confined DMAP molecules substantially promote the CO2-to-multicarbon conversion at low overpotentials. For instance, at a potential as low as -0.47 V vs. reversible hydrogen electrode, the DMAP-functionalized Cu exhibits over 80 % selectivity towards multi-carbon products, while the pristine Cu shows only ~35 % selectivity for multi-carbon products. Notably, ethanol appears as the primary product on DMAP-functionalized Cu, with selectivity approaching 50 % at a high current density of 400 mA cm-2. Detailed kinetic analysis, in situ spectroscopies, and theoretical calculations indicate that DMAP-induced electron accumulations on surface Cu-sites decrease the reaction energy for C-C coupling. Additionally, the interactions between DMAP and oxygenated intermediates facilitate the ethanol formation pathway in CO2R. Overall, this study showcases an effective strategy to guide future endeavors involving molecular tuning effects.

Tensile-Strained Cu Penetration Electrode Boosts Asymmetric C-C Coupling for Ampere-Level CO2-to-C2+ Reduction in Acid

The synthesis of multicarbon (C2+) products remains a substantial challenge in sustainable CO2 electroreduction owing to the need for sufficient current density and faradaic efficiency alongside carbon efficiency. Herein, we demonstrate ampere-level high-efficiency CO2 electroreduction to C2+ products in both neutral and strongly acidic (pH=1) electrolytes using a hierarchical Cu hollow-fiber penetration electrode (HPE). High concentration of K+ could concurrently suppress hydrogen evolution reaction and facilitate C-C coupling, thereby promoting C2+ production in strong acid. By optimizing the K+ and H+ concentration and CO2 flow rate, a faradaic efficiency of 84.5 % and a partial current density as high as 3.1 A cm-2 for C2+ products, alongside a single-pass carbon efficiency of 81.5 % and stable electrolysis for 240 h were demonstrated in a strong acidic solution of H2SO4 and KCl (pH=1). Experimental measurements and density functional theory simulations suggested that tensile-strained Cu HPE enhances the asymmetric C-C coupling to steer the selectivity and activity of C2+ products.

Cu-In Dual Sites with Sulfur Defects toward Superior Ethanol Electrosynthesis from CO2 Electrolysis

The electrosynthesis of multi-carbon chemicals from excess carbon dioxide (CO2) is an area of great interest for research and commercial applications. However, improving both the yield of CO2-to-ethanol conversion and the stability of the catalyst at the same time is proving to be a challenging issue. Here it is proposed to stabilize active Cu(I) and In dual sites with sulfur defects through an electro-driven intercalation strategy, which leads to the delocalization of electron density that enhances orbital hybridizations between the Cu-C and In-H bonds. Hence, the energy barrier for the rate-limiting *CHO formation step is reduced toward the key *OCHCHO* formation during ethanol production, which is also facilitated by the combined Cu site enabling C-C coupling and In site with a higher oxygen affinity based on both thermodynamic and kinetic calculations. Accordingly, such dual-site catalyst achieves a high partial current density toward ethanol of 409 ± 15 mA cm⁻2 for over 120 h. Furthermore, a scaled-up flow cell is assembled with an industrial-relevant current of 5.7 A for over 36 h, in which the carbon loss is less than 2.5% and single-pass carbon efficiency is ≈19%.

Scalable Low-Temperature CO2 Electrolysis: Current Status and Outlook

The electrochemical CO2 reduction (eCO2R) in membrane electrode assemblies (MEAs) has brought e-chemical production one step closer to commercialization because of its advantages of minimized ohmic resistance and stackability. However, the current performance of reported eCO2R in MEAs is still far below the threshold for economic feasibility where low overall cell voltage (<2 V) and extensive stability (>5 years) are required. Furthermore, while the production cost of e-chemicals heavily relies on the carbon capture and product separation processes, these areas have received much less attention compared to CO2 electrolysis, itself. In this perspective, we examine the current status of eCO2R technologies from both academic and industrial points of view. We highlight the gap between current capabilities and commercialization standards and offer future research directions for eCO2R technologies with the hope of achieving industrially viable e-chemical production.

Porphyrin-silver acetylide cluster catalysts with dual active sites for the electrochemical reduction of CO2

A one-step synthesis of porphyrin-silver acetylide clusters from tetra alkyne-substituted porphyrin is described. The solid-state properties of three 2D-like compounds were fully characterised using XPS and XRD while their catalytic properties under CO2 electroreduction reaction conditions were assessed and their faradaic efficiency quantified.

Blended nexus molecules promote CO2 to l-tyrosine conversion

Using CO2 as the primary feedstock offers the potential for high-value utilization of CO2 while forging sustainable pathways for producing valuable natural products, such as l-tyrosine. Cascade catalysis is a promising approach but limited by stringent purity demands of nexus molecules. We developed an abiotic/biotic cascade catalysis using blended nexus molecules for l-tyrosine synthesis. Specifically, we begin by constructing a solid-state reactor to reduce CO2 electrochemically, yielding a mixture of acetic acid and ethanol, which serves as the blended nexus molecules. Subsequently, we use genetic engineering to introduce an ethanol utilization pathway and a tyrosine producing pathway to Escherichia coli to facilitate l-tyrosine production. The ethanol pathway synergistically cooperated with the acetic acid pathway, boosting l-tyrosine production rate (nearly five times higher compared to the strain without ethanol utilization pathway) and enhancing carbon efficiency. Our findings demonstrate that using blended nexus molecules could potentially offer a more favorable strategy for the cascade catalysis aimed at producing valuable natural products.

Active Oxygenated Structure-Intensified CO2 Capture Enables Efficient Electrochemical Ethylene Production Over Carbon Nanofibers

The pursuit of high efficacy C-C coupling during the electrochemical CO2 reduction reaction remains a tremendous challenge owing to the high energy barrier of CO2 activation and insufficient coverage of the desired intermediates on catalytic sites. Inspired by the concept of capture-coupled CO2 activation, we fabricated quinone-grafted carbon nanofibers via an in situ oxidative carbonylation strategy. The quinone functionality of carbon nanofibers promotes the capture of CO2 followed by activation. At a current density of 400 mA cm-2, the Faradaic efficiency of ethylene reached 62.9 %, and a partial current density of 295 mA cm-2 was achieved on the quinone-rich carbon nanofibers. The results of in situ spectroscopy and theoretical calculations indicated that the remarkable selectivity enhancement in ethylene originates from the quinone structure, rather than the electronic properties of Cu particles. The interaction of quinone with CO2 increases the local *CO coverage and simultaneously hinders the co-adsorption of *H on Cu sites, which greatly reduces the energy barrier for C-C coupling and restrains subsequent *CO protonation. The modulation strategy involving specific oxygenated structure, as an independent degree of freedom, guides the design of functionalized carbon materials for tailoring the selectivity of desired products during the CO2 capture and reduction.

In Situ Electropolymerizing Toward EP-CoP/Cu Tandem Catalyst for Enhanced Electrochemical CO2-to-Ethylene Conversion

Electrochemical CO2 reduction has garnered significant interest in the conversion of sustainable energy to valuable fuels and chemicals. Cu-based bimetallic catalysts play a crucial role in enhancing *CO concentration on Cu sites for efficient C─C coupling reactions, particularly for C2 product generation. To enhance Cu's electronic structure and direct its selectivity toward C2 products, a novel strategy is proposed involving the in situ electropolymerization of a nano-thickness cobalt porphyrin polymeric network (EP-CoP) onto a copper electrode, resulting in the creation of a highly effective EP-CoP/Cu tandem catalyst. The even distribution of EP-CoP facilitates the initial reduction of CO2 to *CO intermediates, which then transition to Cu sites for efficient C─C coupling. DFT calculations confirm that the *CO enrichment from Co sites boosts *CO coverage on Cu sites, promoting C─C coupling for C2+ product formation. The EP-CoP/Cu gas diffusion electrode achieves an impressive current density of 726 mA cm-2 at -0.9 V versus reversible hydrogen electrode (RHE), with a 76.8% Faraday efficiency for total C2+ conversion and 43% for ethylene, demonstrating exceptional long-term stability in flow cells. These findings mark a significant step forward in developing a tandem catalyst system for the effective electrochemical production of ethylene.

Glycine modified copper promotes CO2 electroreduction to multi-carbon products: a computational study

Molecular modification strategy exhibits great potential for electrocatalytic CO2 reduction. Here, DFT calculations were applied to study the mechanism of CO2 electroreduction on glycine modified copper. The results indicate that the interaction between the modified molecule and the intermediate could change the reaction energy of CO2 electroreduction.

Unveiling the Interfacial Species Synergy in Promoting CO2 Tandem Electrocatalysis in Near-Neutral Electrolyte

The interfacial species-built local environments on Cu surfaces impact the CO2 electroreduction process significantly in producing value-added multicarbon (C2+) products. However, intricate interfacial dynamics leads to a challenge in understanding how these species affect the process. Herein, with ab initio molecular dynamics (AIMD) and finite element method (FEM) simulations, we reveal that the highly concentrated interfacial species, including the *CO, hydroxide, and K+, could synergistically promote the C-C coupling on the one-dimensional (1D) porous hollow structure regulated interfacial environment. The Cu-Ag tandem catalyst was then synthesized with the as-designed structure, exhibiting a high C2+ Faradaic efficiency of 76.0% with a partial current density of 380.0 mA cm-2 in near-neutral electrolytes. Furthermore, in situ Raman spectra validate that the 1D porous structure regulates the concentration of interfacial CO intermediates and ions to increase *CO coverage, local pH value, and ionic field, promoting the CO2-to-C2+ activity. These results provide insights into the design of practical ECR electrocatalysts by regulating interfacial species-induced local environments.

Strategies for overcoming challenges in selective electrochemical CO2 conversion to ethanol

The electrochemical conversion of carbon dioxide (CO2) to valuable chemicals is gaining significant attention as a pragmatic solution for achieving carbon neutrality and storing renewable energy in a usable form. Recent research increasingly focuses on designing electrocatalysts that specifically convert CO2 into ethanol, a desirable product due to its high-energy density, ease of storage, and portability. However, achieving high-efficiency ethanol production remains a challenge compared to ethylene (a competing product with a similar electron configuration). Existing electrocatalytic systems often suffer from limitations such as low energy efficiency, poor stability, and inadequate selectivity toward ethanol. Inspired by recent progress in the field, this review explores fundamental principles and material advancements in CO2 electroreduction, emphasizing strategies for ethanol production over ethylene. We discuss electrocatalyst design, reaction mechanisms, challenges, and future research directions. These advancements aim to bridge the gap between current research and industrialized applications of this technology.

Selective Increase in CO2 Electroreduction to Ethanol Activity at Nanograin-Boundary-Rich Mixed Cu(I)/Cu(0) Sites via Enriching Co-Adsorbed CO and Hydroxyl Species

Selective producing ethanol from CO2 electroreduction is highly demanded, yet the competing ethylene generation route is commonly more thermodynamically preferred. Herein, we reported an efficient CO2-to-ethanol conversion (53.5 % faradaic efficiency at -0.75 V versus reversible hydrogen electrode (vs. RHE)) over an oxide-derived nanocubic catalyst featured with abundant "embossment-like" structured grain-boundaries. The catalyst also attains a 23.2 % energy efficiency to ethanol within a flow cell reactor. In situ spectroscopy and electrochemical analysis identified that these dualphase Cu(I) and Cu(0) sites stabilized by grain-boundaries are very robust over the operating potential window, which maintains a high concentration of co-adsorbed *CO and hydroxyl (*OH) species. Theoretical calculations revealed that the presence of *OHad not only promote the easier dimerization of *CO to form *OCCO (ΔG~0.20 eV) at low overpotentials but also preferentially favor the key *CHCOH intermediate hydrogenation to *CHCHOH (ethanol pathway) while suppressing its dehydration to *CCH (ethylene pathway), which is believed to determine the remarkable ethanol selectivity. Such imperative intermediates associated with the bifurcation pathway were directly distinguished by isotope labelling in situ infrared spectroscopy. Our work promotes the understanding of bifurcating mechanism of CO2ER-to-hydrocarbons more deeply, providing a feasible strategy for the design of efficient ethanol-targeted catalysts.

Construction of Cobalt Porphyrin-Modified Cu2O Nanowire Array as a Tandem Electrocatalyst for Enhanced CO2 Reduction to C2 Products

Here, the molecule-modified Cu-based array is first constructed as the self-supporting tandem catalyst for electrocatalytic CO2 reduction reaction (CO2RR) to C2 products. The modification of cuprous oxide nanowire array on copper mesh (Cu2O@CM) with cobalt(II) tetraphenylporphyrin (CoTPP) molecules is achieved via a simple liquid phase method. The systematical characterizations confirm that the formation of axial coordinated Co-O-Cu bond between Cu2O and CoTPP can significantly promote the dispersion of CoTPP molecules on Cu2O and the electrical properties of CoTPP-Cu2O@CM heterojunction array. Consequently, as compared to Cu2O@CM array, the optimized CoTPP-Cu2O@CM sample as electrocatalyst can realize the 2.08-fold C2 Faraday efficiency (73.2% vs 35.2%) and the 2.54-fold current density (‒52.9 vs ‒20.8 mA cm-2) at ‒1.1 V versus RHE in an H-cell. The comprehensive performance is superior to most of the reported Cu-based materials in the H-cell. Further study reveals that the CoTPP adsorption on Cu2O can restrain the hydrogen evolution reaction, improve the coverage of *CO intermediate, and maintain the existence of Cu(I) at low potential.

Toward Durable CO2 Electroreduction with Cu-Based Catalysts via Understanding Their Deactivation Modes

The technology of CO2 electrochemical reduction (CO2ER) provides a means to convert CO2, a waste greenhouse gas, into value-added chemicals. Copper is the most studied element that is capable of catalyzing CO2ER to obtain multicarbon products, such as ethylene, ethanol, acetate, etc., at an appreciable rate. Under the operating condition of CO2ER, the catalytic performance of Cu decays because of several factors that alters the surface properties of Cu. In this review, these factors that cause the degradation of Cu-based CO2ER catalysts are categorized into generalized deactivation modes, that are applicable to all electrocatalytic systems. The fundamental principles of each deactivation mode and the associated effects of each on Cu-based catalysts are discussed in detail. Structure- and composition-activity relationship developed from recent in situ/operando characterization studies are presented as evidence of related deactivation modes in operation. With the aim to address these deactivation modes, catalyst design and reaction environment engineering rationales are suggested. Finally, perspectives and remarks built upon the recent advances in CO2ER are provided in attempts to improve the durability of CO2ER catalysts.

Enhancing local K+ adsorption by high-density cube corners for efficient electroreduction of CO2 to C2+ products

Reducing carbon dioxide (CO2) to high value-added chemicals using renewable electricity is a promising approach to reducing CO2 levels in the air and mitigating the greenhouse effect, which depends on high-efficiency electrocatalysts. Copper-based catalysts can be used for electroreduction of CO2 to produce C2+ products with high added value, but suffer from poor stability and low selectivity. Herein, we propose a strategy to enhance the field effect by varying the cubic corner density on the surface of Cu2O microspheres for improving the electrocatalytic performance of CO2 reduction to C2+ products. Finite element method (FEM) simulation results show that the high density of cubic corners helps to enhance the local electric field, which increases the K+ concentration on the catalyst surface. The results of CO2 electroreduction tests show that the FEC2+ of the Cu2O catalyst with high-density cubic corners is 71% at a partial current density of 497 mA cm-2. Density functional theory (DFT) calculations reveal that Cu2O (111) and Cu2O (110) can effectively reduce the energy barrier of C-C coupling and improve the FEC2+ at high K+ concentrations relative to Cu2O (100). This study provides a new perspective for the design and development of efficient CO2RR catalysts.

Efficient CO2 electroreduction to ethanol enabled by tip-curvature-induced local electric fields

Electrocatalytic reduction of CO2 into multicarbon (C2+) products offers a promising pathway for CO2 utilization. However, achieving high selectivity towards multicarbon alcohols, such as ethanol, remains a challenge. In this work, we present a novel CuO nanoflower catalyst with engineered tip curvature, achieving remarkable selectivity and efficiency in the electroreduction of CO2 to ethanol. This catalyst exhibits an ethanol faradaic efficiency (FEethanol) of 47% and a formation rate of 320 μmol h-1 cm-2, with an overall C2+ product faradaic efficiency (FEC2+) reaching ∼77.8%. We attribute this performance to the catalyst's sharp tip, which generates a strong local electric field, thereby accelerating CO2 activation and facilitating C-C coupling for deep CO2 reduction. In situ Raman spectroscopy reveals an increased *OH coverage under operating conditions, where the enhanced *OH adsorption facilitates the stabilization of *CHCOH intermediates through hydrogen bonding interaction, thus improving ethanol selectivity. Our findings demonstrate the pivotal role of local electric fields in altering reaction kinetics for CO2 electroreduction, presenting a new avenue for catalyst design aiming at converting CO2 to ethanol.

A Blueprint for Secondary Coordination Sphere Editing: Approaches Toward Lewis-Acid Assisted Carbon Dioxide Co-Activation

Carbon dioxide (CO2) is a potent greenhouse gas of environmental concern. Seeking to offer a solution to the "CO2-problem", the chemistry community has turned a focus toward transition metal complexes which can activate, reduce, and convert CO2 into carbon-based products. The design of such systems involves judicious selection of both metal and accompanying donor ligand; in part, these efforts are motivated by biological metalloenzymes that undertake similar transformations. As a design element, metal-ligand cooperativity, which leverages intramolecular interactions between a transition metal and an adjacent secondary ligand site, has been acknowledged as a vitally important component by the CO2 activation community. These systems offer a "push-pull" style of activation where electron density is chaperoned onto CO2 with an accompanying electrophile, such as a Lewis-acid, playing the role of acceptor. This pairing allows for the stabilization of reactive CxHyOz-containing intermediates and can bias CO2 product selectivity. In the laboratory, chemists can test hypotheses and ideas, enabling rationalization of why a given pairing of transition metal/Lewis-acid leads to selective CO2 reduction outcomes. This Concept identifies literature examples and highlights key design properties, allowing interested contributors to design, create, and implement novel systems for productive transformations of a small molecule (CO2) with huge potential impact.

Bioinspired molecule-functionalized Cu with high CO adsorption for efficient CO electroreduction to acetate

Electrochemical reduction of carbon dioxide (CO2) or carbon monoxide (CO) to valuable multi-carbon (C2+) products like acetate is a promising approach for a sustainable energy economy. However, it is still challenging to achieve high activity and selectivity for acetate production, especially in neutral electrolytes. Herein, a bioinspired hemin/Cu hybrid catalyst was developed to enhance the surface *CO coverage for highly efficient electroreduction of CO to acetate fuels. The hemin/Cu electrocatalyst exhibits a remarkable faradaic efficiency of 45.2% for CO-to-acetate electroreduction and a high acetate partial current density of 152.3 mA cm-2. Furthermore, the developed hybrid catalyst can operate stably at 200 mA cm-2 for 14.6 hours, producing concentrated acetate aqueous solutions (0.235 M, 2.1 wt%). The results of in situ Raman spectroscopy and theoretical calculations proved that the Fe-N4 structure of hemin could enhance the CO adsorption and enrich the local concentration of CO, thereby improving C-C coupling for acetate production. In addition, compared to the unmodified Cu catalysts, the Cu catalysts functionalized with cobalt phthalocyanine with a Co-N4 structure also exhibit improved acetate performance, proving the universality of this bioinspired molecule-enhanced strategy. This work paves a new way to designing bioinspired electrolysis systems for producing specific C2+ products from CO2 or CO electroreduction.

Electrical-Driven Directed-Evolution of Copper Nanowires Catalysts for Efficient Nitrate Reduction to Ammonia

The electrocatalytic conversion of nitrate (NO3 -) to NH3 (NO3RR) at ambient conditions offers a promising alternative to the Haber-Bosch process. The pivotal factors in optimizing the proficient conversion of NO3 - into NH3 include enhancing the adsorption capabilities of the intermediates on the catalyst surface and expediting the hydrogenation steps. Herein, the Cu/Cu2O/Pi NWs catalyst is designed based on the directed-evolution strategy to achieve an efficient reduction of NO3‾. Benefiting from the synergistic effect of the OV-enriched Cu2O phase developed during the directed-evolution process and the pristine Cu phase, the catalyst exhibits improved adsorption performance for diverse NO3RR intermediates. Additionally, the phosphate group anchored on the catalyst's surface during the directed-evolution process facilitates water electrolysis, thereby generating Hads on the catalyst surface and promoting the hydrogenation step of NO3RR. As a result, the Cu/Cu2O/Pi NWs catalyst shows an excellent FE for NH3 (96.6%) and super-high NH3 yield rate of 1.2 mol h-1 gcat. -1 in 1 m KOH and 0.1 m KNO3 solution at -0.5 V versus RHE. Moreover, the catalyst's stability is enhanced by the stabilizing influence of the phosphate group on the Cu2O phase. This work highlights the promise of a directed-evolution approach in designing catalysts for NO3RR.

Recent advances in dynamic reconstruction of electrocatalysts for carbon dioxide reduction

Electrocatalysts undergo structural evolution under operating electrochemical CO2 reduction reaction (CO2RR) conditions. This dynamic reconstruction correlates with variations in CO2RR activity, selectivity, and stability, posing challenges in catalyst design for electrochemical CO2RR. Despite increased research on the reconstruction behavior of CO2RR electrocatalysts, a comprehensive understanding of their dynamic structural evolution under reaction conditions is lacking. This review summarizes recent developments in the dynamic reconstruction of catalysts during the CO2RR process, covering fundamental principles, modulation strategies, and in situ/operando characterizations. It aims to enhance understanding of electrocatalyst dynamic reconstruction, offering guidelines for the rational design of CO2RR electrocatalysts.

Illustration of the Intrinsic Mechanism of Reconstructed Cu Clusters for Enhanced CO2 Electroreduction to Ethanol Production with Industrial Current Density

Copper-based catalysts have been attracting increasing attention for CO2 electroreduction into value-added multicarbon chemicals. However, most Cu-based catalysts are designed for ethylene production, while ethanol production with high Faradaic efficiency at high current density still remains a great challenge. Herein, Cu clusters supported on single-atom Cu dispersed nitrogen-doped carbon (Cux/Cu-N/C) show ethanol Faradaic efficiency of ∼40% and partial current density of ∼350 mA cm-2. Quasi in situ X-ray photoelectron spectroscopy and operando X-ray absorption spectroscopy results suggest the generation of surface asymmetrical sites of Cu+ and Cu0 as well as Cu clusters by electrochemical reduction and reconstruction during the CO2 electroreduction process. Density functional theory calculations indicate that the interaction between Cu clusters and the Cu-N/C support enhances *CO adsorption, facilitates the C-C coupling step, and favors the hydrogenation rather than dehydroxylation of the critical intermediate *CHCOH toward ethanol in the bifurcation.

Enhanced CO2 Electroreduction to Multi-Carbon Products on Copper via Plasma Fluorination

The electroreduction of carbon dioxide (CO2) to multi-carbon (C2+) compounds offers a viable approach for the up-conversion of greenhouse gases into valuable fuels and feedstocks. Nevertheless, current industrial applications face limitations due to unsatisfactory conversion efficiency and high overpotential. Herein, a facile and scalable plasma fluorination method is reported. Concurrently, self-evolution during CO2 electroreduction is employed to control the active sites of Cu catalysts. The copper catalyst modified with fluorine exhibits an impressive C2+ Faradaic efficiency (FE) of 81.8% at a low potential of -0.56 V (vs a reversible hydrogen electrode) in an alkaline flow cell. The presence of modified fluorine leads to the exposure and stabilization of high-activity Cu+ species, enhancing the adsorption of *CO intermediates and the generation of *CHO, facilitating the subsequent dimerization. This results in a notably improved conversion efficiency of 13.1% and a significant reduction in the overpotential (≈100 mV) for the C2+ products. Furthermore, a superior C2+ FE of 81.6% at 250 mA cm-2, coupled with an energy efficiency of 31.0%, can be achieved in a two-electrode membrane electrode assembly electrolyzer utilizing the fluorine-modified copper catalyst. The strategy provides novel insights into the controllable electronic modification and surface reconstruction of electrocatalysts with practical potential.

Regulating Lateral Adsorbate Interaction for Efficient Electroreforming of Bio-polyols

Tailoring the selectivity at the electrode-electrolyte interface is one of the greatest challenges for heterogeneous electrocatalysis, and complementary strategies to catalyst structural designs need to be developed. Herein, we proposed a new strategy of controlling the electrocatalytic pathways by lateral adsorbate interaction for the bio-polyol oxidation. Redox-innocent 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) anion possesses the alcoholic property that facilely adsorbs on the nickel oxyhydroxide catalyst, but is resistant to oxidation due to the electron-withdrawing trifluoromethyl groups. The alien HFIP adsorbents can compete with bio-polyols and form a mixed adsorbate layer that creates lateral adsorbate interaction via hydrogen bonding, which achieved a >2-fold enhancement of the oxalate selectivity to 55 % for the representative glycerol oxidation and can be extended to various bio-polyol substrates. Through in situ spectroscopic analysis and DFT calculation on the glycerol oxidation, we reveal that the hydrogen-bonded adsorbate interaction can effectively tune the adsorption energies and tailor the oxidation capabilities toward the targeted products. This work offers an additional perspective of tuning electrocatalytic reactions via introducing redox-innocent adsorbates to create lateral adsorbate interactions.

NHC-CDI Ligands Boost Multicarbon Production in Electrocatalytic CO2 Reduction by Increasing Accumulated Charged Intermediates and Promoting *CO Dimerization on Cu

Copper-based materials exhibit significant potential as catalysts for electrochemical CO2 reduction, owing to their capacity to generate multicarbon hydrocarbons. The molecular functionalization of Cu electrodes represents a simple yet powerful strategy for improving the intrinsic activity of these materials by favoring specific reaction pathways through the creation of tailored microenvironments around the surface active sites. However, despite its success, comprehensive mechanistic insights derived from experimental techniques are often limited, leaving the active role of surface modifiers inconclusive. In this work, we show that N-heterocyclic carbene-carbodiimide-functionalized Cu catalysts display a remarkable activity for multicarbon product formation, surpassing bare Cu electrodes by more than an order of magnitude. These hybrid catalysts operate efficiently using an electrolyzer equipped with a gas diffusion electrode, achieving a multicarbon product selectivity of 58% with a partial current density of ca. -80 mA cm-2. We found that the activity for multicarbon product formation is closely linked to the surface charge that accumulates during electrocatalysis, stemming from surface intermediate buildup. Through X-ray photoelectron spectroscopy, we elucidated the role of the molecular additives in altering the electronic structure of the Cu electrodes, promoting the stabilization of surface CO. Additionally, in situ Raman measurements established the identity of the reaction intermediates that accumulate during electrocatalysis, indicating preferential CO binding on Cu step sites, known for facilitating C-C coupling. This study underscores the significant potential of molecular surface modifications in developing efficient electrocatalysts for CO2 reduction, highlighting surface charge as a pivotal descriptor of multicarbon product activity.

High yield electrosynthesis of oxygenates from CO using a relay Cu-Ag co-catalyst system

As a sustainable alternative to fossil fuel-based manufacture of bulk oxygenates, electrochemical synthesis using CO and H2O as raw materials at ambient conditions offers immense appeal. However, the upscaling of the electrosynthesis of oxygenates encounters kinetic bottlenecks arising from the competing hydrogen evolution reaction with the selective production of ethylene. Herein, a catalytic relay system that can perform in tandem CO capture, activation, intermediate transfer and enrichment on a Cu-Ag composite catalyst is used for attaining high yield CO-to-oxygenates electrosynthesis at high current densities. The composite catalyst Cu/30Ag (molar ratio of Cu to Ag is 7:3) enables high efficiency CO-to-oxygenates conversion, attaining a maximum partial current density for oxygenates of 800 mA cm-2 at an applied current density of 1200 mA cm-2, and with 67 % selectivity. The ability to finely control the production of ethylene and oxygenates highlights the principle of efficient catalyst design based on the relay mechanism.

Local CO Generator Enabled by a CO-Producing Core for Kinetically Enhancing Electrochemical CO2 Reduction to Multicarbon Products

CO plays a crucial role as an intermediate in electrochemical CO2 conversion to generate multicarbon (C2+) products. However, optimizing the coverage of the CO intermediate (*CO) to improve the selectivity of C2+ products remains a great challenge. Here, we designed a hierarchically structured double hollow spherical nanoreactor featuring atomically dispersed nickel (Ni) atoms as the core and copper (Cu) nanoparticles as the shell, which can greatly improve the catalytic activity and selectivity for C2+ compounds. Within this configuration, CO generated at the active Ni sites on the inner layer accumulates in the cavity before spilling over neighboring Cu sites on the outer layer, thus enhancing CO dimerization within the cavity. Notably, this setup achieves a sustained faradaic efficiency of 74.4% for C2+ production, with partial current densities reaching 337.4 mA cm-2. In situ Raman spectroscopy and finite-element method (FEM) simulations demonstrate that the designed local CO generator can effectively increase the local CO concentration and restrict CO evolution, ultimately boosting C-C coupling. The hierarchically ordered architectural design represents a promising solution for achieving highly selective C2+ compound production in the electroreduction of CO2.

Surface modified copper foam with cobalt phthalocyanine carbon nanotube hybrids for tuning CO2 reduction reaction products

The CO2 reduction reaction (CO2RR) is a feasible way to convert this greenhouse gas into molecules of industrial interest. Herein we present the modification of the Cu foam cathode using molecular catalyst hybrid from cobalt phthalocyanine (CoPc) to increase selectivity and stability towards CO2RR products in a flow cell setup.

Electronic Structure Design of Transition Metal-Based Catalysts for Electrochemical Carbon Dioxide Reduction

With the increasingly serious greenhouse effect, the electrochemical carbon dioxide reduction reaction (CO2RR) has garnered widespread attention as it is capable of leveraging renewable energy to convert CO2 into value-added chemicals and fuels. However, the performance of CO2RR can hardly meet expectations because of the diverse intermediates and complicated reaction processes, necessitating the exploitation of highly efficient catalysts. In recent years, with advanced characterization technologies and theoretical simulations, the exploration of catalytic mechanisms has gradually deepened into the electronic structure of catalysts and their interactions with intermediates, which serve as a bridge to facilitate the deeper comprehension of structure-performance relationships. Transition metal-based catalysts (TMCs), extensively applied in electrochemical CO2RR, demonstrate substantial potential for further electronic structure modulation, given their abundance of d electrons. Herein, we discuss the representative feasible strategies to modulate the electronic structure of catalysts, including doping, vacancy, alloying, heterostructure, strain, and phase engineering. These approaches profoundly alter the inherent properties of TMCs and their interaction with intermediates, thereby greatly affecting the reaction rate and pathway of CO2RR. It is believed that the rational electronic structure design and modulation can fundamentally provide viable directions and strategies for the development of advanced catalysts toward efficient electrochemical conversion of CO2 and many other small molecules.

Recent Advances in Electrocatalytic Hydrogenation Reactions on Copper-Based Catalysts

Hydrogenation reactions play a critical role in the synthesis of value-added products within the chemical industry. Electrocatalytic hydrogenation (ECH) using water as the hydrogen source has emerged as an alternative to conventional thermocatalytic processes for sustainable and decentralized chemical synthesis under mild conditions. Among the various ECH catalysts, copper-based (Cu-based) nanomaterials are promising candidates due to their earth-abundance, unique electronic structure, versatility, and high activity/selectivity. Herein, recent advances in the application of Cu-based catalysts in ECH reactions for the upgrading of valuable chemicals are systematically analyzed. The unique properties of Cu-based catalysts in ECH are initially introduced, followed by design strategies to enhance their activity and selectivity. Then, typical ECH reactions on Cu-based catalysts are presented in detail, including carbon dioxide reduction for multicarbon generation, alkyne-to-alkene conversion, selective aldehyde conversion, ammonia production from nitrogen-containing substances, and amine production from organic nitrogen compounds. In these catalysts, the role of catalyst composition and nanostructures toward different products is focused. The co-hydrogenation of two substrates (e.g., CO2 and NOx n, SO3 2-, etc.) via C─N, C─S, and C─C cross-coupling reactions are also highlighted. Finally, the critical issues and future perspectives of Cu-catalyzed ECH are proposed to accelerate the rational development of next-generation catalysts.

Pulsed Electrolysis Promotes CO2 Reduction to Ethanol on Heterostructured Cu2O/Ag Catalysts

The electrochemical conversion of carbon dioxide (CO2) into ethanol with high added value has attracted increasing attention. Here, an efficient catalyst with abundant Cu2O/Ag interfaces for ethanol production under pulsed CO2 electrolysis is reported, which is composed of Cu2O hollow nanospheres loaded with Ag nanoparticles (named as se-Cu2O/Ag). The CO2-to-ethanol Faradaic efficiency is prominently improved to 46.3% at a partial current density up to 417 mA cm-2 under pulsed electrolysis conditions in a neutral flow cell, notably outperforming conventional Cu catalysts during static electrolysis. In situ spectroscopy reveals the stabilized Cu+ species of se-Cu2O/Ag during pulsed electrolysis and the enhanced adsorbed CO intermediate (*CO)coverage on the heterostructured catalyst. Density functional theory (DFT) calculations further confirm that the Cu2O/Ag heterostructure stabilizes the *CO intermediate and promotes the coupling of *CO and adsorbed CH intermediate (*CH). Meanwhile, the stable Cu+ species under pulsed electrolysis favor the hydrogenation of adsorbed HCCOH intermediate (*HCCOH) to adsorbed HCCHOH intermediate (*HCCHOH) on the pathway to ethanol. The synergistic effect between the enhanced generation of *CO on Cu2O/Ag and regenerated Cu+ species under pulsed electrolysis steers the reaction pathway toward ethanol. This work provides some insights into selective ethanol production from CO2 electroreduction via combined catalyst design and non-steady state electrolysis.

Efficient multicarbon formation in acidic CO2 reduction via tandem electrocatalysis

The electrochemical reduction of CO2 in acidic conditions enables high single-pass carbon efficiency. However, the competing hydrogen evolution reaction reduces selectivity in the electrochemical reduction of CO2, a reaction in which the formation of CO, and its ensuing coupling, are each essential to achieving multicarbon (C2+) product formation. These two reactions rely on distinct catalyst properties that are difficult to achieve in a single catalyst. Here we report decoupling the CO2-to-C2+ reaction into two steps, CO2-to-CO and CO-to-C2+, by deploying two distinct catalyst layers operating in tandem to achieve the desired transformation. The first catalyst, atomically dispersed cobalt phthalocyanine, reduces CO2 to CO with high selectivity. This process increases local CO availability to enhance the C-C coupling step implemented on the second catalyst layer, which is a Cu nanocatalyst with a Cu-ionomer interface. The optimized tandem electrodes achieve 61% C2H4 Faradaic efficiency and 82% C2+ Faradaic efficiency at 800 mA cm-2 at 25 °C. When optimized for single-pass utilization, the system reaches a single-pass carbon efficiency of 90 ± 3%, simultaneous with 55 ± 3% C2H4 Faradaic efficiency and a total C2+ Faradaic efficiency of 76 ± 2%, at 800 mA cm-2 with a CO2 flow rate of 2 ml min-1.

Tuning the Catalytic Selectivity Toward C2+ Oxygenate Products by Manipulating Cu Oxidation States in CO Electroreduction

Enhancing the reaction selectivity for multicarbon products (C2+) is an important goal for the electrochemical CO(2) reduction (ECO(2)R) process. Cuprous compounds have demonstrated promising C2+ selectivity in the ECO(2)R process, but further investigation is necessary to thoroughly elucidate their catalytic behavior toward C2+ oxygenate production. In this study, copper nitride-based materials with varying reduction rates were employed as precatalysts. Consequently, a relationship between the selectivity toward C2+ oxygenates and the Cu oxidation state during the ECOR process is established. Results of theoretical and experimental analyses reveal that the Cu0/Cu+ interface plays a key role in enhancing *CO adsorption while lowering the formation energy of *CH2CO, thereby promoting acetate production. This work highlights the significance of the Cu0/Cu+ interface in the regulation of C2+ oxygenate production and paves the way for the development of highly selective catalysts in the future.

Multiscale effects in tandem CO2 electrolysis to C2+ products

CO2 electrolysis is a sustainable technology capable of accelerating global decarbonisation through the production of high-value alternatives to fossil-derived products. CO2 conversion can generate critical multicarbon (C2+) products such as drop-in chemicals ethylene and ethanol, however achieving high selectivity from single-component catalysts is often limited by the competitive formation of C1 products. Tandem catalysis can overcome C2+ selectivity limitations through the incorporation of a component that generates a high concentration of CO, the primary reactant involved in the C-C coupling step to form C2+ products. A wide range of approaches to promote tandem CO2 electrolysis have been presented in recent literature that span atomic-scale manipulation to device-scale engineering. Therefore, an understanding of multiscale effects that contribute to selectivity alterations are required to develop effective tandem systems. In this review, we use relevant examples to highlight the complex and interlinked contributions to selectivity and provide an outlook for future development of tandem CO2 electrolysis systems.

Studying the cation dependence of CO2 reduction intermediates at Cu by in situ VSFG spectroscopy

The nature of the electrolyte cation is known to have a significant impact on electrochemical reduction of CO2 at catalyst|electrolyte interfaces. An understanding of the underlying mechanism responsible for catalytic enhancement as the alkali metal cation group is descended is key to guide catalyst development. Here, we use in situ vibrational sum frequency generation (VSFG) spectroscopy to monitor changes in the binding modes of the CO intermediate at the electrochemical interface of a polycrystalline Cu electrode during CO2 reduction as the electrolyte cation is varied. A CObridge mode is observed only when using Cs+, a cation that is known to facilitate CO2 reduction on Cu, supporting the proposed involvement of CObridge sites in CO coupling mechanisms during CO2 reduction. Ex situ measurements show that the cation dependent CObridge modes correlate with morphological changes of the Cu surface.