Prevention of erosive tooth wear: targeting nutritional and patient-related risks factors

Nanoscale Study on Noninvasive Prevention of Dental Erosion of Enamel by Silver Diamine Fluoride

Here, we aimed to demonstrate the efficacy of silver diamine fluoride (SDF) in halting dental erosion caused by dietary selection and offer a potential explanation for the underlying mechanism. We investigated the surface chemical and mechanical characteristics of human tooth enamel when exposed to Coca-Cola from 10 s to 1 h, with and without the topical treatment of SDF. We analyzed the mechanical properties by measuring the enamel surface roughness and elastic modulus using atomic force microscopy and the surface chemical composition through x-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analyses, with scanning electron microscopy as a supplementary characterization method. After 1 h of immersion in Coca-Cola, the roughness changed from 83 to 287 nm for enamel without SDF treatment and 64 to 70 nm for enamel with SDF treatment. Under the same conditions, the elastic modulus changed from 125 GPa to 13 GPa for enamel without SDF treatment and 215 GPa to 205 GPa for enamel with SDF treatment. Topical coating of SDF onto enamel formed a passivation layer composed of fluorapatite and created added fluorine flux in the system, which protected the teeth from demineralization under Coca-Cola etching, as shown by morphology and chemical composition analysis as well as roughness and modulus characterization. Applying SDF to enamel minimizes changes in chemical compositions and surface roughness while improving enamel elastic modulus.

Proteome of the 2-h in vivo Formed Acquired Enamel Pellicle of Adolescents with Erosive Tooth Wear, Caries, or Sound

INTRODUCTION

Acquired pellicle (AP) acts as a membrane preventing acids from coming into direct contact with the tooth. Possibly, individuals with different dental health status present changes in its composition that could disrupt this function. Thus, the aim of this study was to compare the protein composition of the AP in adolescents with erosive tooth wear (ETW), caries, or sound.

METHODS

Calibrated examiners in BEWE index and ICDAS-merged Epi criteria assessed ETW and caries in a sample of 454 systemically healthy adolescents aged 12-15 years old. Thirty subjects from that sample were selected for this study: ETW group (n = 10; total BEWE ≥9 and absence of dentinal caries lesions); caries group (n = 10; total BEWE <9 and with at least one dentinal caries lesion), and sound group (n = 10; total BEWE <9 and absence of dentinal caries lesions). Two-hour-formation AP samples were taken from buccal, occlusal/incisal, palatal/lingual tooth surfaces. Protein composition was analysed by liquid chromatography-tandem mass spectrometry. Using mean reporter ion values, relative abundances of proteins were compared among the three groups to calculate for fold changes. Twofold protein increases or decreases were reported (t test, p < 0.05). Gene Ontology (GO) of included proteins was assigned.

RESULTS

Mean age of participants was 13.1 ± 1.14 years and 56.6% were females. The prevalence of ETW was of 66.6% and of dentinal caries of 33.3%. The GO analyses showed that the majority of detected proteins were stress response related. The ETW group disclosed upregulated relative abundance of antileukoprotease (2.85-fold in ETW vs. sound and 2.34-fold in ETW group vs. caries group); histatin (2.42-fold in ETW group vs. sound group and 2.20-fold in ETW group vs. caries group), and prolactin-induced protein (2.30-fold in ETW group vs. sound group and 2.06-fold in ETW group vs. caries group) (p < 0.05). Hemoglobin subunits alpha (HBA) and beta (HBB) showed decreased relative abundances in the ETW and caries groups when compared to the sound group (HBA: 0.42-fold in ETW group and 0.40-fold in caries group; HBB: 0.45-fold in ETW group and 0.38-fold in caries group; p < 0.05).

CONCLUSION

AP from individuals with ETW showed differences when compared to other dental conditions, with relative abundance increasing of some stress response-associated proteins in ETW and a decrease in proteins related to salivary protection against acid challenges.

Practical training using BEWE aimed at improving the diagnosis ability of erosive tooth wear for dental students-A randomized trial

INTRODUCTION

Erosive tooth wear (ETW) has been gaining attention due to its high prevalence. However, ETW clinical diagnosis is difficult and may go unnoticed by many professionals. The present study aimed to develop, implement and evaluate a theoretical-practical training using active methodologies in the development of undergraduate students' skills for the diagnosis of ETW compared to the traditional teaching method.

MATERIALS AND METHODS

This randomized controlled study involved two parallel groups: control group (n = 22), with learning based only on theoretical content and test group (n = 24), learning by theoretical-practical activity mediated by monitors/tutors. The theoretical class covered the current concepts of ETW, aetiology, diagnosis, use of the BEWE index, prevention and treatment. The practical training included exercises and discussions based on the diagnosis using BEWE scores of a collection of images and extracted teeth. To evaluate the efficacy of the teaching-learning methods, a theoretical multiple-choice questionnaire and a practical test using images and extracted teeth were applied. The outcome was the number of correct answers. Groups were compared by Mann-Whitney (theoretical knowledge) and T tests (practical ability in diagnosis) (p < .05).

RESULTS

There was no significant difference between groups in the theoretical evaluation (p = .866). The test group showed higher ability to diagnose ETW lesions compared to the control group in the practical tests (p = .001). The performance of ETW diagnosis was similar when images were used in comparison to extracted teeth (p = .570).

CONCLUSION

The practical activity associated with theoretical classes can be a promising strategy to improve the development of undergraduate students' skills in the diagnosis of ETW.

Factors associated with prevalence and severity of erosive tooth wear in patients with reflux oesophagitis

BACKGROUND

Extrinsic factors for erosive tooth wear (ETW) have been widely reported, but the intrinsic factors for wear remain unclear.

OBJECTIVES

The aim of this study was to evaluate the factors associated with the prevalence of ETW in patients with reflux oesophagitis (RO). To prevent severe ETW with RO, factors associated with severity of ETW were also evaluated.

METHODS

A total of 270 patients with RO were recruited. A modified tooth wear index was used to evaluate the prevalence and severity of ETW. Salivary secretion and buffering capacity were assessed prior to endoscopy. Subjects were asked to complete a medical condition and oral self-care questionnaire. Univariate and multivariate analyses were employed to identify factors collectively associated with the prevalence and severity of ETW.

RESULTS

A total of 212 cases were categorized as patients with ETW (148 with mild ETW and 64 with severe ETW). Multivariate analyses indicated that saliva secretion, severity of RO and proton pump inhibitor (PPI) resistance were associated with the prevalence of ETW, whereas age, BMI and severity of RO were associated with the severity of ETW. The odds ratio of saliva secretion and BMI were less than 1, meaning that higher saliva secretion resulted in a lower prevalence of ETW and lower BMI was associated with severe ETW.

CONCLUSION

Saliva secretion, severity of RO and PPI resistance were associated with the prevalence of ETW, whereas age, BMI and severity of RO were associated with the severity of ETW. Lower saliva secretion and BMI were significant factors for ETW.

Addition of substances to reduce the erosive potential of acidic beverages to tooth enamel: A scoping review

OBJECTIVE

This scoping review aimed (1) to map, analyse, interpret and synthesize data from in situ studies on which substances were added to acidic beverages to reduce the erosive potential on tooth enamel and (2) to establish the level of evidence of the effectiveness of adding substances to acidic beverages to reduce the erosive potential on tooth enamel.

DESIGN

This is a scoping review, according to the methods from the Joanna Briggs Institute and PRISMA-ScR, with high-sensitivity searches in the databases PubMed (MEDLINE), Virtual Health Library, Embase (Elsevier), Scopus (Elsevier), Web of Science and ScienceDirect (Elsevier). In situ studies published in English until December 2022 were included. Studies that did not report a control group were excluded. To map and summarize the results, tables and figures were used.

RESULTS

From 895 potentially eligible articles, nine were included. Blackcurrant juices (n = 5) with the addition of calcium (n = 3) or xanthan gum (n = 2) formulations were the most tested in terms of reducing the erosive potential of the beverages on tooth enamel. The profilometer was the equipment of choice (n = 8) for evaluating the loss of enamel structure after the experimental tests.

CONCLUSIONS

Calcium and xanthan gum are among the most tested by in situ studies, offering promising results in reducing the erosive potential of fruit juices and carbonated and energy drinks.

Protective effect of various toothpastes and mouthwashes against erosive and abrasive challenge on eroded dentin: an in vitro study

The study aimed to compare various toothpastes and mouthwashes on permanent tooth dentin after erosive and abrasive challenges. 130 sound premolars dentin were randomly submitted to an initial erosive challenge and a cycle of erosive and abrasive challenges for five days. The five experimental groups (n = 26) were: (1) Control group (artificial saliva), (2) Elmex erosion protection toothpaste and mouthwash, (3) Vitis anticaries biorepair toothpaste and mouthwash, (4) Oral B Pro-expert toothpaste and Oral B Fluorinse mouthwash, and (5) MI Paste ONE toothpaste and Caphosol mouthwash. Microhardness, surface roughness values, and the topographical characteristics of the dentin surface were assessed. The highest percentage of recovered dentin microhardness (%RDMH) value was observed in groups 2 and 4, followed by groups 5 and 3, respectively. The %RDMH values in groups 2 and 4 did not demonstrate a significant difference (p = 0.855). The highest percentage of improvement in surface roughness was recorded in groups 2 and 4, with no significant differences (p = 0.989). The atomic force microscopy (AFM) findings were consistent with the surface roughness data. The best recovery of dentin microhardness and roughness were measured with the Elmex and Oral B toothpaste and mouthwash, followed by MI Paste ONE toothpaste and Caphosol mouthwash and Vitis anticaries biorepair toothpaste and mouthwash.

The erosive effect of pomegranate juice on enamel: An in vitro study

AIM

Dental erosion is a chemical-mechanical process that leads to the loss of dental hard tissues. This study aimed to investigate the effect of pomegranate juice on the enamel.

METHODS

Enamel blocks were randomly divided into three groups: deionized water, cola, and pomegranate juice. The blocks were immersed in the solutions four times a day for 14 days, and stored in artificial saliva for the remaining period. The surface hardness was measured on days 7 and 14. The surface structures of the demineralized blocks were observed via scanning electron microscopy (SEM), and the depth of demineralization was observed via confocal laser scanning microscopy (CLSM). The pH, calcium, and phosphorus levels of the three solutions were analyzed.

RESULTS

The microhardness values of the blocks in the pomegranate juice and cola groups decreased with the increase in the demineralization time. The blocks in the pomegranate juice group exhibited large fractures in the enamel column, whereas those in the cola group had pitted enamels with destruction of the interstitial enamel column. Compared with cola group, fluorescent penetration increased in pomegranate juice (P < 0.01). The pH of cola (2.32 ± 0.09) was lower than that of pomegranate juice (3.16 ± 0.16). Furthermore, the calcium content in pomegranate juice was significantly higher than that in cola (P < 0.01). Alternatively, the concentration of phosphorous in cola was significantly higher than that in pomegranate juice (P < 0.01).

CONCLUSION

These findings indicate that pomegranate juice can cause enamel demineralization with an erosive potential comparable to that of cola.

In vitro assessment of dental erosion caused by clear aligners

The primary objective of this in vitro study was to investigate the erosive potential of enamel under the use of clear aligners (CA), by simulating in vivo conditions experienced by patients who do not remove their CA during the consumption of acidic beverages. In addition, the difference in erosion protection conferred by artificial and human saliva was also evaluated. Sound-extracted human premolars (n = 20) had half of their surfaces protected with acid-resistant nail polish and were randomly distributed into two experimental groups (n = 10): teeth immersed in human saliva or artificial saliva. All teeth had half of their lingual surfaces enclosed by a CA device. The erosive challenges consisted of individual immersion of each sample in citrus acid three times a day, intermediated by immersion in human saliva or artificial saliva for 2 h, during ten days of the erosive protocol. The enamel mineral content was analyzed by high-resolution microtomography. The differential mineral concentration profiles were obtained by subtracting the profile of the mineral concentration of the exposed area and enamel under the CA area from the respective sound area (control). In addition, enamel wear and enamel volume loss were measured. Scanning electron microscopy (SEM) was also performed to analyze the enamel surface. Data were analyzed by two-way ANOVA, followed by the Student-Newman-Keuls test. The enamel wear was higher in teeth immersed in artificial saliva, when compared to human saliva (p < 0.001). The volume loss of the exposed enamel area was lower for tooth immersed in human saliva than in artificial saliva (p < 0.001), during the acid challenge protocol. The use of CA during acid challenges promoted wear and mineral loss of dental enamel, being these changes more pronounced on the enamel surface under the CA. These results open a new path for the development of further studies adopting clinical protocols that promote more accurate responses in the clinical practice during orthodontic treatment.

Are S-PRG composites able to resist against erosive and abrasive challenges and protect surrounding enamel in situ?

OBJECTIVES

This study evaluated the resistance of S-PRG (Surface Pre-Reacted Glass-ionomer) composites and other restorative materials against erosive and abrasive challenges and their protective effect on enamel adjacent to the restorations.

MATERIALS AND METHODS

Bovine enamel blocks were prepared and randomized into 12 groups, including 6 types of material, each of them subjected to erosion_e or erosion+abrasion_ea: Beautifil II (S-PRG); Beautifil Bulk Restorative (S-PRG); Filtek Z250 XT; Filtek Bulk Fill; EQUIA Forte; Riva Light Cure. Cavities were prepared in the middle of enamel blocks and restored with the materials. Initial profiling measurement was performed on the material and on adjacent enamel (100, 200, 300, 600 and 700 μm from the restoration margin). Palatal intraoral appliances with the restored enamel blocks were used by the volunteers (n = 10). During 5 days appliances were immersed in 2.5 % citric acid for 2 min; 6 × /day (erosion_e). For ea condition, blocks were brushed for 1 min after each acid immersion. Final profile assessment was performed. Data were analysed by two and three way ANOVA followed by Tukey's test (p < 0.05).

RESULTS

Material wear: Riva Light Cure showed the highest wear followed by EQUIA Forte and then all resin composites, including the ones with S-PRG (p = 0.000). Enamel wear: there was significant interaction among type of restorative material, wear condition and distance (p = 0.014), enamel around materials showed similar wear (p = 0.983) and the enamel subjected to ea exhibited highest wear (p = 0.000).

CONCLUSION

SPRG based composites showed resistance against erosive and abrasive challenges but were not able to protect enamel adjacent to the restorations.

CLINICAL SIGNIFICANCE

S-PRG composites exhibit resistance to material wear comparable to resin composites. However, they have shown an inability to effectively protect the adjacent enamel under in situ erosive-abrasive conditions, despite the presence of mineral-loss-preventing ions surrounding materials.

Proteomic analysis of stimulated saliva in gastroesophageal reflux disease patients with and without erosive tooth wear: Observational study

OBJECTIVE

To evaluate the difference in the proteomic profile of stimulated saliva in patients with gastroesophageal reflux disease (GERD) with (GE) and without (GNE) erosive tooth wear (ETW), regarding both human and bacterial proteins.

METHODS

Stimulated saliva (SS) was collected from 16 patients (8/group). Samples were centrifuged at 4.500 g for 15 min under refrigeration to remove all debris. The supernatant from each saliva sample was taken and frozen at -80 °C. After extracting the proteins, they were submitted to reverse phase liquid chromatography and mass spectrometry (nLC-ESI-MS/MS). Label-free proteomic quantification was performed using Protein Lynx Global Service (PLGS) software (p < 0.05) for human and bacterial proteins.

RESULTS

In total, 67 human proteins were common for GNE and GE groups. GNE group presented, compared to GE group, increase in proteins that confer antimicrobial and acid resistant properties, such as cystatins, histatin and immunoglobulins. However, GNE group had a marked decrease in subunits of hemoglobin (α, β and delta). Regarding bacterial proteins, for SS, 7 and 10 unique proteins were identified in the GE and GNE groups, respectively. They are related to protein synthesis and energy metabolism and interact with human proteins typically found in saliva and supramolecular complexes of the acquired pellicle.

CONCLUSIONS

Our data indicate that the stimulation of the salivary flow increases acid resistant and antimicrobial proteins in saliva, which might protect against ETW.

CLINICAL SIGNIFICANCE

This pioneer study showed important differences in the human and bacterial proteome of SS in patients with GERD with or without ETW.

Acquired pellicle engineering with the association of cystatin and vitamin E against enamel erosion

OBJECTIVE

Evaluate CaneCPI-5 associated with Vitamin E in acquired enamel pellicle (AEP) engineering to prevent dental erosion.

METHODS

180 human enamel specimens were divided into 12 groups and treated with the following solutions: Cane+VitT and Cane+VitS- CaneCPI-5 + Vit E; Vit+CaneT and Vit+CaneS- Vit E + CaneCPI-5; VitT and VitS- Vit E; CaneT and CaneS- CaneCPI-5; ControlT and ControlS - AmF/NaF/SnCl2; WaterT and WaterS- Deionized water. Groups' name followed by "T" were first treated (200 μl; 2 min) and then incubated in human saliva (200 μl; 1 h) to form the AEP. For groups followed by "S", the AEP was formed and then treatment was applied. The erosive challenge consisted of immersion in 1% citric acid (1 min, 1x/day, for 3 days). The percentage of superficial hardness loss (%SHL) and the relative surface reflection intensity (%SRI) were subjected to normality and homogeneity tests, Shapiro-Wilk and Levene tests, respectively. Subsequently, the data were analyzed using two-way ANOVA, Tukey's test and Pearson's correlation (p < 0.005).

RESULTS

For%SHL and%SRI, water controls showed significantly lower protective capacity. Cane+VitT, Cane+VitS, and Vit+CaneS presented the lowest%SHL, and VitT and VitS did not differ from Vit+CaneT, but they were different from the other groups (p = 0.002). The greatest%SRI was found for the Cane+VitT, Vit+CaneT, VitT, Cane+VitS, Vit+CaneS, and VitS groups, which did not significantly differ. CaneT and ControlT, showed similar reflections compared to CaneS and ControlS.

CONCLUSION

CaneCPI-5 and Vitamin E demonstrated a synergistic protective effect against initial erosion.

CLINICAL SIGNIFICANCE

The results open up new possibilities for preventive approaches against erosion through the acquired pellicle engineering, with the combination of CaneCPI-5 and Vitamin E, which demonstrated to be more effective than commercial stannous mouthwash. Further research is warranted to explore the potential of this combination in diverse clinical settings.

Association of salivary parameters and erosive tooth wear in preschool children

The aims of this study were to 1) assess the association between erosive tooth wear (ETW) according to the BEWE (Basic Erosive Wear Examination) scoring system and salivary parameters and 2) compare salivary parameters according to ETW severity in the subgroup of children with ETW. This cross-sectional study included 52 preschool children aged 5 years paired by sex. A calibrated examiner assessed ETW using BEWE criteria, and stimulated saliva was collected to determine salivary flow, osmolality, pH, and buffering capacity. The children were divided into two groups: without ETW (n=26; BEWE score 0) and with ETW (n=26; BEWE scores 1 and 2). Logistic regression analysis was used to determine the magnitude of the association between ETW and salivary parameters and estimates of odds ratios (OR). In the unadjusted analysis, the ETW group was more likely to have lower salivary flow (OR = 0.079; 95%CI = 0.013-0.469; p = 0.005) and lower osmolality (OR = 0.993; 95%CI = 0.985-1.000; p = 0.049). In the adjusted analysis, salivary flow remained significantly associated with ETW (OR = 0.087; 95%CI = 0.014-0.533; p = 0.008). Lower salivary osmolality values were observed in ETW, especially in preschool children with more severe ETW (BEWE score 2). Receiver operating characteristic (ROC) determined a salivary osmolality cutoff point of < 201 for the presence of ETW. In conclusion, salivary flow rate was significantly associated with ETW prevalence. Lower values of salivary osmolality were observed in preschool children with distinct erosive lesions with significant loss of tooth structure (BEWE 2).

Eating Disorders and Dental Erosion: A Systematic Review

Both eating disorders and dental erosion are increasingly affecting adolescents and young adults. Thus, our systematic review was designed to answer the question: "Is there a relationship between dental erosion and eating disorders?" Following the inclusion and exclusion criteria, 31 studies were included in this systematic review (according to the PRISMA statement guidelines). Based on the meta-analysis, 54.4% of patients with bulimia nervosa and 26.7% with anorexia nervosa experienced tooth erosion. For the whole group of 1699 patients with eating disorders, erosive lesions were observed in 42.1% of patients. Bulimics were more than 10 times more likely to experience dental erosion compared to healthy individuals (OR = 10.383 [95%CI: 4.882-22.086]). Similarly, more than 16 times increased odds of tooth erosion were found in patients with self-induced vomiting (OR = 16.176 [95%CI: 1.438-181.918]). In conclusion, eating disorders are associated with an increased risk of developing erosive lesions, especially in patients with bulimia nervosa.

Different vehicles containing CaneCPI-5 reduce erosive dentin wear in situ

OBJECTIVE

This study evaluated the protective capacity of a sugarcane-derived cystatin (CaneCPI-5) in different vehicles (1-solution and 2-chitosan gel) against erosive dentin wear in situ.

METHODS

In part-1, 15 volunteers participated in a crossover protocol (solutions): Water; Elmex™ and CaneCPI-5. The volunteers wore an appliance with 4 dentin samples for 5 days. These samples were treated with a drop of the solutions for 1 min (4X/d), then the acquired pellicle (AP) was formed and the samples were subjected to erosive challenges (EROSION: citric acid, for 90 s, 4X/day). 2X/day, half of the samples were also abraded for 15 s (ABRASION). In part-2, 16 volunteers participated in a crossover protocol (gel): No gel, Chitosan gel, Chitosan gel + NaF and Chitosan gel + CaneCPI-5. The volunteers also wore an appliance. The samples were treated once/day with the gel or not for 4 min, then the AP was formed and the samples were subjected to erosive and abrasive challenges, as reported in part-1. Dentin wear was measured by profilometry. Data were analyzed by two-way RM-ANOVA and Sidak's tests (p < 0.05).

RESULTS

Part-1: Elmex™ and CaneCPI-5 significantly reduced dentin loss in comparison with Water for the EROSION/ABRASION conditions (p < 0.05). Part-2, all the treated groups significantly reduced the dentin loss in comparison to the No gel. The greatest reduction was found for the gel + CaneCPI-5 group for the EROSION/ABRASION (p < 0.05).

CONCLUSION

The solution and chitosan gel containing CaneCPI-5 protected against erosive dentin wear in situ.

CLINICAL RELEVANCE

These different vehicles are probably sufficient for protecting people with high risk of developing erosive dentin wear.

Effects of in vitro erosion on surface texture, microhardness, and color stability of resin composite with S-PRG fillers

OBJECTIVES

To evaluate the effect of acid erosion on different physical properties of resin composite with S-PRG (surface pre-reacted glass) fillers, by conducting simulations of intrinsic and extrinsic sources.

MATERIALS AND METHODS

Cylindrical samples (Ø6 vs. 2 mm) of a conventional nanohybrid resin composite (Forma, Ultradent) and of a nanohybrid resin composite with S-PRG filler (Beautifil II, Shofu) were exposed to erosive cycling (5 days), based on (n=12) remineralizing solution (control); 0.3% citric acid (pH=2.6); or 0.01 M hydrochloric acid (pH=2). Roughness (Ra), microhardness (KHN), and color (CIEL*a*b*, CIEDE2000, and Vita scale (SGU)) factors were analyzed at the initial and final time points, and the general color changes (ΔE_ab, ΔE₀₀, ΔSGU) were calculated. Final images were obtained using scanning electron microscopy (SEM). The data were evaluated by generalized models, Mann-Whitney, Wilcoxon, Kruskal-Wallis, and Dunn tests (α=0.05).

RESULTS

Regarding KHN, there was no difference between the groups or the time periods (p = 0.74). As for Ra, there was a significant increase in the Ra of both composites after cycling with hydrochloric acid, but only the resin composite with S-PRG filler showed a change in Ra after cycling with citric acid (p = 0.003). After cycling with citric and hydrochloric acid, the highest Ra values were found for the resin composite with S-PRG filler (p < 0.0001), corroborating the result of images (SEM) indicating loss of filler and porosities in this material. The resin composite with S-PRG filler showed higher ΔE_ab and ΔE₀₀, in addition to more negative ΔSGU values and lower L* values after exposure to both acids, compared to the control (p < 0.05).

CONCLUSION

The acidic conditions altered the roughness and color stability of the materials tested, pointing out that the resin composite containing S-PRG filler showed greater degradation of its physical properties than the conventional resin composite.

CLINICAL RELEVANCE

Bioactive materials are relevant, considering that their properties interact with dental hard tissues; however, the S-PRG-based resin composite showed greater degradation under acidic conditions than the conventional resin composite.

Gels containing statherin-derived peptide protect against enamel and dentin erosive tooth wear in vitro

The effect of gels containing a statherin-derived peptide (Stn) on the protection against enamel and dentin erosive tooth wear (ETW) in vitro was evaluated. Bovine enamel and dentin specimens were divided into 2 groups (n = 15 and 18/group for enamel and dentin, respectively) that were treated with Chitosan or Carboxymethylcellulose (CMC) gels containing Stn15pSpS at 1.88 × 10-5 M or 3.76 × 10-5 M. Chitosan or CMC gels without active ingredients served as negative controls, while chitosan gel containing 1.23% F (as NaF) and acidulated phosphate fluoride gel (1.23% F) served as positive controls. The gels were applied on the specimens for 4 min. Stimulated saliva was collected from 3 donors and used to form a 2-h acquired pellicle on the specimens. Then, the specimens were submitted to an erosive pH cycling protocol 4 times/day for 7 days (0.01 M HCl pH 2.0/45 s, artificial saliva/2 h, and artificial saliva overnight). The gels were applied again during pH cycling, 2 times/day for 4 min after the first and last erosive challenges. Enamel and dentin loss (μm) were assessed by contact profilometry. Scanning electron microscopy (SEM) was analyzed using a cold field emission. Data were analyzed by two-way ANOVA (for chitosan and CMC gels, separately) and Tukey's multiple comparison test. SEM images showed changes to enamel topography after application oft the gels containing Stn or F. Regarding CMC-based gels, for enamel, none of the treatments significantly reduced ETW in comparison with placebo; for dentin, however, gels containing Stn, regardless the concentration, significantly reduced the ETW. Moreover, Chitosan-based gels, regardless the Stn concentration, were able to protect enamel and dentin against ETW. Gels containing Stn might be a new approach to protect against ETW.

Preventive effect of chitosan gel containing CaneCPI-5 against enamel erosive wear in situ

OBJECTIVE

This study evaluated the preventive effect of a chitosan gel containing CaneCPI-5 against enamel erosion and erosion + abrasion in situ.

METHODS

Sixteen volunteers participated in a crossover, double-blind protocol, comprising 4 phases: (1) no treatment (Nt); (2) chitosan gel (Cg); (3) chitosan gel + 12,300 ppm NaF (Cg + NaF); and (4) chitosan gel + 0.1 mg/mL CaneCPI-5 (Cg + Cane). Volunteers wore an appliance containing 4 specimens. Once/day, they applied the gel (except for Nt) (4 min/specimen). Erosive challenges were performed extra-orally (0.1% citric acid, 90 s, 4 × /day; ERO). Specimens were also abraded (toothbrush, 15 s/specimen, 2 × /day; ERO + ABR). Enamel wear was assessed by profilometry and relative surface reflection intensity (%SRI). Two-way RM-ANOVA/Sidak's tests and Spearman's correlation were used (p < 0.05).

RESULTS

For profilometry, ERO + ABR promoted significantly greater wear when compared with ERO. There was a significant difference among all treatments. The lowest enamel loss occurred for Cg + Cane, followed by Cg + NaF, Cg, and Nt (p < 0.05). The %SRI was significantly lower for ERO + ABR when compared to ERO, only for the Nt group. The greatest %SRI was found for the Cg + NaF and Cg + Cane groups, which did not differ significantly, regardless of the conditions. The lowest %SRI was found for the Nt and Cg groups, which did not differ from each other, regardless of the conditions. The Nt group did not differ significantly from the Cg + NaF (ERO). There was a significant correlation between both analyses.

CONCLUSION

The incorporation of CaneCPI-5 in the chitosan gel prevented erosive wear in situ.

CLINICAL RELEVANCE

These results open a new perspective for the use of CaneCPI-5 in other application vehicles, such as chitosan gel.

Effect of air-abrasion pretreatment with three bioactive materials on enamel susceptibility to erosion by artificial gastric juice

OBJECTIVE

The purpose of the study was to investigate the protective effect of three in-office preventive treatments with bioactive materials against enamel erosion induced by artificial gastric juice similar to that found in gastroesophageal reflux disease (GERD) patients. The treatments included air-abrasion of enamel with a fluoride-containing bioactive glass (BioMinF®), Bioglass 45S5 (ProSylc) and nano-hydroxyapatite (MI Pearls) to test enamel susceptibility following an erosive challenge.

METHODS

Enamel surface loss was evaluated using confocal microscopy, while changes in enamel surface roughness and morphology were also investigated after the treatments. SEM and EDS were used to observe formation of apatite crystals on enamel and to detect alterations in mineral composition. In Group 1 (negative control) the specimens did not receive any treatment; Group 2 specimens (positive control) treated with 0.4 % SnF₂, while in Groups 3-5 enamel was air-abraded with BioMinF®, ProSylc and MI Pearls, respectively.

RESULTS

All the experimental groups reduced significantly enamel surface loss compared to the negative control group (p < 0.05), except for the MI Pearls treatment (p > 0.05). The most protective behavior against erosion presented the treatment with SnF₂. BioMinF induced the larger amount of apatite crystals on the enamel surface, followed by ProSylc.

SIGNIFICANCE

BioMinF and ProSylc treatments may be beneficial against dental erosion induced by gastric juice in GERD patients, while MI Pearls treatment may not suitable for this indication. Both materials promote formation of apatite crystals on enamel in acidic conditions protecting the surface from the erosion. The tested treatments may be useful in GERD patients who cannot comply with at-home therapies with SnF₂.

Relationship between erosive tooth wear and possible etiological factors among dental students

OBJECTIVES

The aim of this study was to assess the relationship between erosive tooth wear (ETW) and possible etiological factors in a group of dental students.

MATERIALS AND METHODS

A total of 126 dental students from a public dental school were included in this study. A questionnaire was used to investigate the possible etiological factors related to ETW. The Basic Erosive Wear Examination (BEWE) criteria were used to examine the status of ETW. A univariable and multivariable logistic regression models were used to assess the relationship between the presence of ETW and explanatory variables.

RESULTS

Univariable analysis revealed that taking acidic foods and alcohol more than 4-5 times per week increases the odds of ETW by 6.043 and 2.532 times, respectively, and taking dairy products, fruit juice, and milk more than 4-5 times per week decreases the likelihood of ETW by 61%, 66%, and 80%, respectively. The results of multivariable regression analysis showed that the frequency of consumption of especially acidic foods significantly increased the risk of ETW (OR = 9.981, 95% CI 3.577-27.849, p < 0.001).

CONCLUSIONS

Although the ETW status of dental students, who are the future dentists, varies depending on different possible etiological factors, especially the consumption of acidic foods has increased the risk of ETW approximately 10 times.

CLINICAL RELEVANCE

The findings highlight the high relevance of ETW, especially with acidic food consumption, and the importance of controlling potential etiological factors in dental students.

S-PRG-based composites erosive wear resistance and the effect on surrounding enamel

This study evaluated Surface Pre-Reacted Glass-ionomer (S-PRG)-based-composites' surface resistance against erosive wear and their protective effect on surrounding enamel. Bovine enamel was randomized into 12 groups (n = 10/group) [erosion (e) or erosion + abrasion (a)]: nanohybrid-S-PRG-based composite (SPRGe/SPRGa), nanohybrid-S-PRG-based bulk-fill (SPRGBFe/SPRGBFa), nanoparticle-composite (RCe/RCa), nanohybrid-bulk-fill (BFe/BFa), Glass Hybrid Restorative System (GHRSe/GHRSa), and resin-modified glass-ionomer-cement (RMGICe/RMGICa). Cavities were prepared and restored. Initial profile assessment was performed on material and on adjacent enamel at distances of 100, 200, 300, 600, and 700 μm from margin. Specimens were immersed in citric acid (2 min; 6×/day for 5 days) for erosion. Erosion + abrasion groups were brushed for 1 min after erosion. Final profile assessment was performed. Two-way ANOVA and Tukey-test showed: for erosion, the GHRSe and RMGICe presented greater material wear compared to the other groups (p = 0.001); up to 300 μm away from restoration, GHRSe and SPRGBFe were able to prevent enamel loss compared to RMGICe and other composite groups (p = 0.001). For erosion + abrasion, none of the materials exhibited a significant protective effect and S-PRG-based groups showed lower wear than RMGICa and GHRSa, and higher wear than composites (p = 0.001). S-PRG-based-composites can diminish surrounding enamel loss only against erosion alone, similarly to GIC, with advantage of being a more resistant material.

Influence of energy drinks on enamel erosion: In vitro study using different assessment techniques

Background

Dental erosion has become a relevant public health problem in recent years and is related to the increase in the consumption of acidic beverages. Objective: The aim of the present study was to evaluate the erosive potential of energy drinks on dental enamel using an in vitro erosion model.

Material and Methods

Thirty-eight blocks of human enamel were divided into four groups: G1- TNT Energy Drink®(n=8), G2- Red Bull® (n=10), G3- Monster Energy® (n=10), and G4- Coca-Cola® (n=10) (positive control). For the chemical analysis, the pH values, titratable acidity, and buffering capacity of the beverages were measured in triplicate. For the erosive test, the specimens were immersed in the beverages (5ml/block) for 30 minutes at room temperature with gentle shaking. Initial and final surface microhardness values were measured and the percentage of the loss of surface microhardness was calculated. Profilometry (surface loss and lesion depth) and mineral loss analysis (quantitative light-induced fluorescence) were performed. The data were analysed statistically using ANOVA followed by the Bonferroni correction, Pearson’s correlation test, and multiple linear regression (p<0.05).

Results

The energy drinks had pH values ranging from 2.36 to 3.41. The lowest titratable acidity value was recorded for Monster Energy® and the highest was recorded for TNT Energy Drink®. All energy drinks had buffering capacity values higher than Coca-Cola®. Analysing the eroded enamel surface, the specimens submitted to TNT Energy Drink® had the greatest percentage loss of surface microhardness, surface loss, depth, and mineral loss, followed by those submitted to Red Bull® and Monster Energy®. Surface loss was the only predictor of mineral loss (p<0.001).

Conclusions

Based on the study model employed, all the energy drinks examined were erosive to tooth enamel and TNT Energy Drink® had the worst behaviour.

Key words:Energy drinks, tooth erosion, tooth demineralisation, hardness tests, quantitative light-induced fluorescence.

In situ effect of CO2 laser (9.3 μm) irradiation, combined with AmF/NaF/SnCl2 solution in prevention and control of erosive tooth wear in human enamel

OBJECTIVES

This single-blind, controlled cross-over in situ study aimed to evaluate the effect of CO2 laser (9.3µm) irradiation, combined with AmF/NaF/SnCl2 solution on prevention and control of Erosive Tooth Wear (ETW) in human enamel.

MATERIALS AND METHODS

Two trial conditions were analyzed, Condition-1 as ETW-prevention (sound tooth surface) and Condition-2 as ETW-control (in vitro initial erosive lesion). The experiment was conducted in two phases, one with one without exposure to AmF/NaF/SnCl2 solution. A hundred and ninety-two samples of human enamel (3x3x1mm) were randomly divided into 4 experimental groups for each condition: (C) without treatment (negative control); (F) AmF/NaF/SnCl2 solution (positive control); (L) CO2 laser irradiation; (L+F) CO2 laser+AmF/NaF/SnCl2 solution. Twelve volunteers used a removable device each containing 8 samples per phase. Ex-vivo erosive challenges (4×5min/day) and rinsing protocol (1×30s/day) were performed. The surface loss was determined using optical profilometer (n=12 per group), and the surface morphology was observed with Scanning Electron Microscopy (n=3).

RESULTS

Condition-1 data were analyzed by one-way ANOVA and Condition-2 by two-way repeated measures ANOVA, both with Tukey post-hoc tests (α=5%). Condition-1: groups L (4.59 ±2.95µm) and L+F (1.58 ±1.24µm) showed significantly less surface loss in preventing ETW than groups C and F. Condition-2: in controlling the progression of ETW, L+F was the only group with no significant surface loss between initial erosive lesion (3.65 ±0.16µm) and after erosive challenge (4.99 ±1.17µm).

CONCLUSIONS

CO2 9.3µm laser application prevented and controlled ETW progression in human enamel, with greater efficiency when combined with AmF/NaF/SnCl2 solution application.

Solutions and Gels Containing a Sugarcane-Derived Cystatin (CaneCPI-5) Reduce Enamel and Dentin Erosion in vitro

The effect of solutions and gels containing a sugarcane-derived cystatin (CaneCPI-5) on the protection against enamel and dentin erosion in vitro was evaluated. Bovine enamel and dentin specimens were divided into 2 groups (n = 135 and 153/group for enamel and dentin, respectively) that were treated with solutions or chitosan gels containing 0.1 or 0.25 mg/mL CaneCPI-5. The positive controls for solutions and gels were Elmex Erosion Protection™ solution and NaF gel (12,300 ppm F), respectively. Deionized water and chitosan gel served as controls, respectively. The solutions were first applied on the specimens for 1 min and the gels for 4 min. Stimulated saliva was collected from 3 donors and used to form a 2-h acquired pellicle on the specimens. Then, the specimens were submitted to an erosive pH cycling protocol 4 times/day for 7 days (0.1% citric acid pH 2.5/90 s, artificial saliva/2 h, and artificial saliva overnight). The solutions and gels were applied again during pH cycling, 2 times/day for 1 min and 4 min, respectively, after the first and last erosive challenges. Enamel and dentin losses (µm) were assessed by contact profilometry. Data were analyzed by 2-way ANOVA and Tukey's test (p < 0.05). All the treatments significantly reduced enamel and dentin loss in comparison with controls. Both CaneCPI-5 concentrations had a similar protective effect against enamel erosion, but only the higher concentration was as effective against dentin erosion as the positive control. Regarding the vehicles, only the 0.1 mg/mL gel performed worse than the positive control for dentin. CaneCPI-5 reduced enamel and dentin erosion to a similar extent as the fluoride-containing vehicles. However, dentin requires higher CaneCPI-5 concentrations, in the case of gels. Solutions or gels containing CaneCPI-5 might be a new approach to protect against dental erosion.

Nutrition Care Practices of Dietitians and Oral Health Professionals for Oral Health Conditions: A Scoping Review

BACKGROUND

Oral health conditions, such as dental caries, pose a substantial burden worldwide. Although there are many risk factors for poor oral health, diet is often implicated as a cause of these issues. The purpose of this scoping review was to identify and map studies that have captured information on the "real-world" nutrition care practices of oral health professionals (OHPs) and dietitians to optimize oral health, and specifically the dentition and periodontium.

METHODS

A search of peer-reviewed articles was conducted using MEDLINE, CINAHL, and Embase. Articles that addressed the review objective and met the following criteria were included: English language, published since 2000, and study conducted in a high-income country.

RESULTS

Overall, 70 articles were included. Most articles reported on cross-sectional survey studies and provided self-reported data on OHP practices; few articles reported on dietitians. Most articles reported only general/unspecific information on assessment and intervention practices, such as dietary analysis, nutrition counselling, and diet advice, and lacked specific information about the care provided, such as the dietary assessment tools used, type of information provided, and time spent on these activities. Barriers to the provision of nutrition care by OHPs were common and included time and lack of remuneration. Few studies reported on collaboration between dietitians and OHPs.

CONCLUSIONS

Several studies have captured self-reported information on nutrition care practices of OHPs related to oral health; however, there is limited information available on the details of the care provided. Few studies have examined the practices of dietitians.

Acidic food choice among adolescents with bulimic symptomatology: a major risk factor for erosive tooth wear?

PURPOSE

Evaluate dietary habits and the presence of erosive tooth wear (ETW) among female adolescents with varying severity of bulimic symptomatology.

METHODS

An explanatory study was conducted with 72 female school adolescents with bulimic symptomatology, aged 15-18 years in Southeastern Brazil. Dietary habits were evaluated through a food frequency questionnaire. Bulimic symptomatology was evaluated and classified (mild, moderate and severe) according to the Bulimic Investigatory Test of Edinburgh. ETW examinations were performed. Data analysis involved descriptive statistics, bivariate analysis, Kruskal-Wallis/Mann-Whitney tests and Poisson regression. Ethical approval and informed consents were obtained.

RESULTS

The final population consisted of 62 participants. The prevalence of ETW differed among adolescents with mild, moderate and severe bulimic symptomatology (p = 0.001), corresponding to 5.9%, 8.0% and 45.0%, respectively. Adolescents with severe bulimic symptomatology presented higher daily consumption of acidic food: citric fruits (p < 0.005), diet soda (p < 0.009) and ketchup (p = 0.004). No difference related to vomiting practices was observed between groups (p = 0.060). The adjusted regression model showed that a higher prevalence of ETW was associated with self-induced vomit at least once a week (PR = 2.42, 95% CI = 1.00-5.86, p = 0.05) and higher frequencies of consumption of citric fruits (PR = 7.96, 95% CI = 1.50-42.11, p = 0.015) and diet soda (PR = 2.32, 95% CI = 1.09-4.91, p = 0.029).

CONCLUSION

It was the food choices (acidic food) and not purging practices that differed among adolescents with varying severity of bulimic symptomology. Likewise, higher consumption of citric fruits was the main factor associated with higher prevalence of ETW.

LEVEL OF EVIDENCE

III case-control analytic study.

Development of a Chewing Robot With Built-in Humanoid Jaws to Simulate Mastication to Quantify Robotic Agents Release From Chewing Gums Compared to Human Participants

Medicated chewing gum has been recognised as a new advanced drug delivery method, with a promising future. Its potential has not yet been fully exploited because currently there is no gold standard for testing the release of agents from chewing gum in vitro. This study presents a novel humanoid chewing robot capable of closely replicating the human chewing motion in a closed environment, incorporating artificial saliva and allowing measurement of xylitol release from the gum. The release of xylitol from commercially available chewing gum was quantified following both in vitro and in vivo mastication. The chewing robot demonstrated a similar release rate of xylitol as human participants. The greatest release of xylitol occurred during the first 5 minutes of chewing and after 20 minutes of chewing only a low amount of xylitol remained in the gum bolus, irrespective of the chewing method used. Saliva and artificial saliva solutions respectively were collected after 5, 10, 15 and 20 minutes of continuous chewing and the amount of xylitol released from the chewing gum determined. Bioengineering has been implemented as the key engineering strategy to create an artificial oral environment that closely mimics that found in vivo. These results demonstrate the chewing robot with built-in humanoid jaws could provide opportunities for pharmaceutical companies to investigate and refine drug release from gum, with reduced patient exposure and reduced costs using this novel methodology.

Salivary Hemoglobin Protects against Erosive Tooth Wear in Gastric Reflux Patients

<b><i>Objective:</i></b> Saliva is the most important biological factor to protect against erosive tooth wear (ETW). Gastroesophageal reflux disease (GERD) patients have an increased risk of ETW due to the frequent presence of intrinsic acids in the oral cavity. Remarkably, not all GERD patients suffer from ETW, which might be due to differences in the composition of the saliva. <b><i>Methods:</i></b> This study compared the proteomic profile of saliva in patients (1) with GERD and ETW (basic erosive wear examination, BEWE, score ≥9; GE group) and (2) with GERD without ETW (BEWE = 0; GNE group) using shotgun label-free quantitative proteomic analysis nLC-ESI-MS/MS. The ability of hemoglobin (Hb) to protect against initial enamel erosion caused by a daily 10-s immersion of enamel specimens in 0.01 M HCl (pH 2.3) for 3 days was evaluated in vitro for proof of concept. Surface hardness change was used as response variable. <b><i>Results:</i></b> The differential expression of Hb subunits was significantly increased in the GNE group versus the GE group, in particular the Hb α-subunit that showed a &#x3e;22-fold increase. Expressions of serum albumin (4.5-fold) and isoforms of cytoskeletal keratin type II (&#x3e;3-fold) were also increased in the GNE group. Proteinase inhibitors, such as α₁-antitrypsin and α₂-macroglobulin, were only identified in the GNE group. In vitro, Hb (1.0 and 4.0 mg/mL) significantly reduced initial enamel erosion compared to a negative control after 3 days. <b><i>Conclusions:</i></b> Our results indicate that many proteins, with special emphasis on Hb, may be involved in the resistance of GERD patients to the occurrence of ETW. These proteins may be candidates for inclusion in dental products to protect against ETW.

Does delayed toothbrushing after the consumption of erosive foodstuffs or beverages decrease erosive tooth wear? A systematic review and meta-analysis

OBJECTIVE

Controversy exists regarding the effectiveness of delayed toothbrushing in decreasing erosive tooth wear (ETW). The purpose of this systematic review and meta-analysis was to assess the effects of delayed toothbrushing on ETW.

MATERIALS AND METHODS

This systematic review and meta-analysis was conducted according to the PRISMA statement and registered in PROSPERO (CRD42020200463). PubMed, Embase, and Web of Science databases were systematically searched with no publication year limits. Screening and data extraction were performed independently by two reviewers. In situ and in vitro studies comparing ETW after delayed and immediate toothbrushing following an erosive attack were included. Review Manager software 5.3 (The Cochrane Collaboration, Oxford, UK) was used for statistical analyses. Heterogeneity was assessed with the Cochran Q test and I² statistics.

RESULTS

Of the 565 potentially relevant studies, 26 full-text articles were assessed for eligibility. Twelve articles were included in the systematic review, and 11 were included in the qualitative analyses. No significant difference in the ETW of human enamel was observed between delayed and immediate toothbrushing (P = 0.13), whereas significantly less ETW of bovine enamel was observed after delayed toothbrushing (P < 0.001). No significant difference in the ETW of bovine dentin was observed between delayed and immediate toothbrushing (P = 0.34). Studies on human dentin were not available. Subgroup analyses revealed a significant contribution of the use of fluoridated toothpaste to decreasing the ETW of human enamel after erosion and toothbrush abrasion (P = 0.02).

CONCLUSIONS

Bovine and human teeth behaved differently in response to erosion and toothbrush abrasion. Delayed toothbrushing after an erosive attack was not effective at decreasing the ETW of human enamel compared to immediate toothbrushing, whereas it was effective at decreasing the ETW of bovine enamel.

CLINICAL RELEVANCE

Delayed toothbrushing alone after the consumption of erosive foodstuffs or beverages is not capable of preventing erosive enamel wear.

Prevalence and risk indicators of non-carious cervical lesions in male footballers

Background

Non-carious cervical lesions (NCCLs) have shown a significant incidence and prevalence and have been increasingly associated with people’s lifestyles and youths. This cross-sectional study aimed to determine the prevalence of NCCLs in footballers and to address potential risk indicators.

Methods

Fourty-three male semi-professional footballers with an average of 27 years old completed a questionnaire and were subjected to intraoral examination in terms of cervical tooth wear, morphological characteristics of NCCLs, tooth sensitivity, occlusal/incisal wear, and malocclusion classification. Also, laboratory assays were performed to determine salivary parameters: flow rate, pH, buffer capacity, level of Ca (calcium), Na (sodium), and K (potassium) ions, and level of cortisol. The data obtained from the questionnaire and intraoral examinations were subjected to Chi-square and Poisson regression models while the data obtained from the laboratory assays were analyzed by using analysis of variance (p <  0.05).

Results

The prevalence of NCCLs was 39.5%. The participants presented predominantly initial lesions with signs of mechanical stress. The daily training time was found as a significant risk indicator (p = 0.028). The multivariate analysis showed a significant difference in the variables daily training time (p = 0.023), lemon water intake while fasting (p = 0.002), toothpaste type (p = 0.004), tooth sensitivity (p = 0.006); previous orthodontic treatment (p = 0.003), and occlusion type (p = 0.008). All participants presented normal salivary parameters and levels of cortisol.

Conclusion

The prevalence of NCCLs among footballers was remarkable. The premolars were the most affected teeth and presented symptoms/signs of initial lesions. The daily training time was a dominant risk indicator of NCCLs development. Footballers presented adequate salivary parameters and cortisol levels.

Do commercial whitening dentifrices increase enamel erosive tooth wear?

Objective

This in vitro study evaluated the effect of commercial whitening dentifrices on erosive tooth wear (ETW) of bovine enamel samples, in comparison with commercial regular dentifrices.

Methodology

Sixty bovine crowns were embedded in acrylic resin, polished and then had their baseline profile determined. They were randomly assigned to 5 groups (n=12/group), according to the type of commercial dentifrice to be tested: GI – Crest Anti-cavity Regular; GII – Crest 3D White; GIII – Colgate Total 12 Clean Mint; GIV – Colgate Optic White; GV – Placebo (negative control, fluoride-free dentifrice). The samples were submitted to daily erosive and abrasive challenges for 3 days. The erosive challenges were performed 3 times a day by immersing the specimens in 0.1% citric acid solution (pH 2.5) for 90 s. Each day after the first and last erosive challenges, the specimens were subjected to the abrasive challenge for 15 s, using a toothbrushing machine (Biopdi, São Carlos, SP, Brazil), soft toothbrushes and slurry (1:3 g/ml) of the tested toothpastes (1.5 N). The specimens were kept in artificial saliva between the challenges. The final profile was obtained and the ETW (µm) was calculated. Data were analyzed by Kruskal-Wallis and Dunn’s tests (p<0.05).

Results

All dentifrices tested significantly reduced the enamel wear in comparison with the Placebo, except GIII. The median (95% CI) ETW was 1.35 (1.25-1.46)^bc for GI, 1.17 (1.01-1.34)^cd for GII, 1.36 (1.28-1.45)^ab for GIII, 1.08 (1.04-1.14)^d for GIV and 2.28 (2.18-2.39)^a for GV.

Conclusion

When dentifrices from the same manufacturer were compared, the whitening dentifrices led to similar or less wear than the regular ones.

The use of fluoride for the prevention of dental erosion and erosive tooth wear in children and adolescents

BACKGROUND

Erosive tooth wear (ETW) has gained increasing clinical relevance. It is estimated that worldwide 30-50% of deciduous and 20-45% of permanent teeth are affected. One of the most important nutritional factors causing ETW is the overconsumption of soft drinks, but also patient-related factors like reflux or eating disorders can lead to erosive lesions. Whether acids lead to erosive demineralisation depends on their degree of saturation with respect to tooth mineral at their actual pH.

REVIEW

Fluoride compounds like sodium or amine fluoride seem to be of limited efficacy against erosion, the main reason for this is the missing biofilm in the erosive process as well as the lower pH of the acids compared to bacterial acids. This means that to achieve some kind of preventive effect it would be necessary to use products with higher fluoride concentration, which is not an appropriate option for small children, and/or to increase the frequency of application. In addition, the fluoride compound plays a role as promising effects were found when fluoride is combined with titanium or stannous ions. TiF₄ can cause acid-resistant surface coatings and when Sn²⁺/F^- formulations are applied, Sn is not only found on the surface but is also incorporated into enamel and dentine. Both effects make the tooth surface more resistant against acid demineralisation. Different fluoride-containing vehicles have been tested to prevent erosion/ETW, such as toothpastes, rinses, gels and varnishes. Toothpastes offer some degree of protection, especially Sn²⁺-containing formulations, but effects of the active ingredients are sometimes counteracted by the presence of abrasives.

CONCLUSION

Detecting associated factors and influencing them is the main instrument in arresting erosive tooth wear. Additionally, patients at risk for dental erosion should always use an additional fluoride source preferably containing Sn²⁺.