CoFe2O4@MIL-100(Fe) hybrid magnetic nanoparticles exhibit fast and selective adsorption of arsenic with high adsorption capacity

Ferrocene-based metal-organic frameworks with dual synergistic active sites for selectively electrochemical removal of arsenic from contaminated water

The effective removal of trace levels of the highly toxic arsenite (As(Ⅲ)) from groundwater is crucial to address the threat to drinking water supply. Herein, we developed an electrochemical separation system utilizing redox-active ferrocene-based metal-organic frameworks (termed Fe-DFc) for selective removal of As(III). This system leveraged 1,1'-ferrocenedicarboxylic acid as a ligand coordinated with iron, enabling the highly selective capture and conversion of As(III) from groundwater. The Fe-DFc electrode-based electrochemical system not only effectively removed As(III) even in the presence of a 1250-fold excess of competing electrolytes, but also converted about 96 % of the adsorbed As(III) into the less toxic As(V), surpassing the results of those documented in the current literature. X-ray absorption fine structure analysis and density functional theory calculations demonstrated that the high selectivity of Fe-O6 moiety and the exceptional redox activity of Fc synergistically contributed to the efficient removal of As(III). Moreover, the electrochemical separation system enabled the remediation of arsenic-contaminated groundwater at a low energy cost of 0.033 kWh m-3 during long-term operation, highlighting the application potential of the electrochemical technology for arsenic removal from contaminated water.

Sulfonated magnetic spirulina nanobiomaterial as a novel and environmentally friendly catalyst for the synthesis of dihydroquinazolin-4(1H)-ones in aqueous medium

Spirulina algae is an excellent candidate for catalyst preparation due to its reactive functional groups, cost-effectiveness, widespread commercial accessibility, and biodegradability. In this study, magnetized Spirulina was used for the synthesis of dihydroquinazolin-4(1H)-ones (DHQZs) as catalyst. Magnetized Spirulina was produced by CoFe2O4 and sulfonation method using chlorosulfonic acid to create the catalyst [CoFe2O4-Sp-SO3H]. It was affirmed by various techniques, including Fourier transform infrared (FT-IR), Vibrating sample magnetometry (VSM), Powder X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS), Thermogravimetric analysis (TGA), Transmission electron microscopy (TEM), Field emission scanning electron microscopy (FE-SEM), and elemental mapping techniques. DHQZs synthesis was accomplished through a concise one-pot, three-component reaction involving a range of diverse aldehydes, isatoic anhydride, and primary aromatic amine, within an aqueous medium. The method offers several advantages, including using green conditions, the generation of several new 2-furan-quinazolinone derivatives, chromatography-free purification, short reaction times, appropriate yield of product (75-96%), and catalyst recyclability. The proposed catalyst and water as solvent demonstrated a strong synergistic effect, leading to the prosperous synthesis of various novel dihydroquinazolinones at 60 °C. These numerous benefits make our approach highly attractive for academic research and industrial applications.

Metal-Organic Framework with a Redox-Active Bridge Enables Electrochemically Highly Selective Removal of Arsenic from Water

Selective removal of trace, highly toxic arsenic from water is vital to ensure an adequate and safe drinking water supply for over 230 million people around the globe affected by arsenic contamination. Here, we developed an Fe-based metal-organic framework (MOF) with a ferrocene (Fc) redox-active bridge (termed Fe-MIL-88B-Fc) for the highly selective removal of As(III) from water. At a cell voltage of 1.2 V, Fe-MIL-88B-Fc can selectively separate and oxidize As(III) into the less harmful As(V) state in the presence of a 100- to 1250-fold excess of competing electrolyte, with an uptake capacity of >110 mg-As g^-1 adsorbent. The high affinity between the uncharged As(III) and the μ₃-O trimer (-36.55 kcal mol^-1) in Fe-MIL-88B-Fc and the electron transfer between As(III) and redox-active Fc⁺ synergistically govern the selective capture and conversion of arsenic. The Fe-based MOF demonstrates high selectivity and capacity to remediate arsenic-contaminated natural water at a low energy cost (0.025 kWh m^-3). This study provides valuable guidance for the tailoring of effective and robust electrodes, which can lead to a wider application of electrochemical separation technologies.

Overview on recent advances of magnetic metal-organic framework (MMOF) composites in removal of heavy metals from aqueous system

Developing a novel, simple, and cost-effective analytical technique with high enrichment capacity and selectivity is crucial for environmental monitoring and remediation. Metal-organic frameworks (MOFs) are porous coordination polymers that are self-assembly synthesized from organic linkers and inorganic metal ions/metal clusters. Magnetic metal-organic framework (MMOF) composites are promising candidate among the new-generation sorbent materials available for magnetic solid-phase extraction (MSPE) of environmental contaminants due to their superparamagnetism properties, high crystallinity, permanent porosity, ultrahigh specific surface area, adaptable pore shape/sizes, tunable functionality, designable framework topology, rapid and ultrahigh adsorption capacity, and reusability. In this review, we focus on recent scientific progress in the removal of heavy metal ions present in contaminated aquatic system by using MMOF composites. Different types of MMOFs, their synthetic approaches, and various properties that are harnessed for removal of heavy metal ions from contaminated water are discussed briefly. Adsorption mechanisms involved, adsorption capacity, and regeneration of the MMOF sorbents as well as recovery of heavy metal ions adsorbed that are reported in the last ten years have been discussed in this review. Moreover, particular prospects, challenges, and opportunities in future development of MMOFs towards their greener synthetic approaches for their practical industrial applications have critically been considered in this review.

A Brief Review of Recent Results in Arsenic Adsorption Process from Aquatic Environments by Metal-Organic Frameworks: Classification Based on Kinetics, Isotherms and Thermodynamics Behaviors

In nature, arsenic, a metalloid found in soil, is one of the most dangerous elements that can be combined with heavy metals. Industrial wastewater containing heavy metals is considered one of the most dangerous environmental pollutants, especially for microorganisms and human health. An overabundance of heavy metals primarily leads to disturbances in the fundamental reactions and synthesis of essential macromolecules in living organisms. Among these contaminants, the presence of arsenic in the aquatic environment has always been a global concern. As (V) and As (III) are the two most common oxidation states of inorganic arsenic ions. This research concentrates on the kinetics, isotherms, and thermodynamics of metal-organic frameworks (MOFs), which have been applied for arsenic ions uptake from aqueous solutions. This review provides an overview of the current capabilities and properties of MOFs used for arsenic removal, focusing on its kinetics and isotherms of adsorption, as well as its thermodynamic behavior in water and wastewater.

Recent developments of magnetic nanoadsorbents for remediation of arsenic from aqueous stream

One of the emerging environmental concerns is the high levels of arsenic ions found in groundwater and other water sources. Decontaminating water that contains arsenic is crucial for environmental and health reasons. Nano-adsorbents have gained much interest recently for the adsorptive removal of arsenic species from wastewater. On the other hand, for their prospective use in natural water treatment, current nano-adsorbents must be separated from treated fluids. Researchers studied nanocomposite iron oxide-based adsorbents to overcome these problems and to design effective sorbents for removing arsenic. This study provides a summary of current developments in the field of magnetic nanoadsorbents for the removal of various arsenic compounds from wastewater. Adsorption of arsenic from groundwater has been found to be very promising for magnetic nanoadsorbents. In order to eliminate arsenic from the aqueous phase, magnetic nanocomposite adsorbents may offer practical and affordable water purification solutions.

High efficiency of magnetite nanoparticles for the arsenic removal from an aqueous solution and natural water taken from Tambo River in Peru

Water is an essential compound on earth and necessary for life. The presence of highly toxic contaminants such as arsenic and others, in many cases, represents one of the biggest problems facing the earth´s population. Treatment of contaminated water with magnetite (Fe3O4) nanoparticles (NPs) can play a crucial role in arsenic removal. In this report, we demonstrate arsenic removal from an aqueous solution and natural water taken from the Peruvian river (Tambo River in Arequipa, Peru) using magnetite NPs synthesized by the coprecipitation method. XRD data analysis of Fe3O4 NPs revealed the formation of the cubic-spinel phase of magnetite with an average crystallite size of ~ 13 nm, which is found in good agreement with the physical size assessed from TEM image analysis. Magnetic results evidence that our NPs show a superparamagnetic-like behavior with a thermal relaxation of magnetic moments mediated by strong particle-particle interactions. FTIR absorption band shows the interactions between arsenate anions and Fe-O and Fe-OH groups through a complex mechanism. The experimental results showed that arsenic adsorption is fast during the first 10 min; while the equilibrium is reached within 60 min, providing an arsenic removal efficiency of ~ 97%. Adsorption kinetics is well modeled using the pseudo-second-order kinetic equation, suggesting that the adsorption process is related to the chemisorption model. According to Langmuir's model, the maximum arsenic adsorption capacity of 81.04 mg·g- 1 at pH = 2.5 was estimated, which describes the adsorption process as being monolayer, However, our results suggest that multilayer adsorption can be produced after monolayer saturation in agreement with the Freundlich model. This finding was corroborated by the Sips model, which showed a good correlation to the experimental data. Tests using natural water taken from Tambo River indicate a significant reduction of arsenic concentration from 356 µg L- 1 to 7.38 µg L- 1, the latter is below the limit imposed by World Health Organization (10 µg L- 1), suggesting that magnetite NPs show great potential for the arsenic removal.

Magnetic nanocomposite adsorbents for abatement of arsenic species from water and wastewater

The presence of high concentrations of arsenic species in drinking water and other water bodies has become one of the most critical environmental concerns. Therefore, decontamination of arsenic-containing water is essential for improved health and environmental concern. In recent years, nano-adsorbents have been widely used for the adsorptive removal of arsenic from water. Separating existing nano-adsorbents from treated waters, on the other hand, is a critical issue for their potential applications in natural water treatment. To address these issues and to effectively remove arsenic from water, researchers looked at iron oxide-based magnetic nanocomposite adsorbents. The magnetic nanoadsorbents have the benefit of surface functionalization, making it easier to target a specific pollutant for adsorption, and magnetic separation. In addition, magnetic nanoparticles have a large surface area, high chemical inertness, superparamagnetic, high magnetic susceptibility, small particle size, and large specific surface area, and are especially easily separated in a magnetic field. Magnetic nano-adsorbents have been discovered to have a lot of potential for eliminating arsenic from water. The recent advances in magnetic nano-absorbents for the cleanup of arsenic species from water are summarized in this paper. Future perspectives and directions were also discussed in this article. This will help budding researchers for the further advancement of magnetic nanocomposites for the treatment of water and wastewater contaminated with arsenic.

Tuning the structure of cerium-based metal-organic frameworks for efficient removal of arsenic species: The role of organic ligands

The ability of organic ligands to change the structure of metal-organic frameworks (MOFs) in nature and influence their adsorption efficiency for arsenic species is enormous. The current work was designed to investigate the adsorption performance of cerium-based MOFs with tunable structures through the use of organic ligands (Ce-MOF-66 and Ce-MOF-808) towards arsenic species from water. The structural features of Ce-MOF-66 and Ce-MOF-808 with varying crystallinity, morphology, particle size, and surface area are considerably altered by organic ligands tuning, resulting in clearly distinct arsenate (As (V)) and arsenite (As (III)) adsorption capabilities. The experimental results showed that the Langmuir adsorption capacities of As (V) by Ce-MOF-66 and Ce-MOF-808 reached 355.67 and 217.80 mg/g, respectively, while for As (III) were 5.52 and 402.10 mg/g for Ce-MOF-66 and Ce-MOF-808, respectively. Except for the impact of PO₄^3- on As (V), co-existing ions had no significant influence on adsorption, illustrating the high selectivity. Furthermore, to understand the structure and adsorption mechanism, two adsorbents were characterized by powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, specific surface area, Fourier transform infrared and X-ray photoelectron spectroscopy, in which identified that unsaturated sites and ligand exchange were the main adsorption mechanisms of As (V) and As (III). Overall, this research presents a novel approach for developing high-performance Ce-derived MOFs adsorbents to capture arsenic species.

MIL series of metal organic frameworks (MOFs) as novel adsorbents for heavy metals in water: A review

With large specific surface area, abundant adsorption sites, flexible pore structure, and good water stability, Materials of Institute Lavoisier frameworks (MILs) have attracted increasing attention as effective environmental adsorbents. This review systematically analyzes and recapitulates recent progress in the synthesis and application of MIL-based adsorbents for the removal of aqueous heavy metal ions. Commonly used solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical syntheses of MILs are first summarized and compared. Instead of focusing on adsorption process parameters, adsorption performances and governing mechanisms of virgin MILs, functional MILs, MIL-based composites, and carbonized MILs to representative metal(loid) ions (chromium, arsenic, lead, cadmium, and mercury) in water under various conditions are then systematically reviewed and discussed. In the end, this work also outlines prospects and future directions to promote the applications of MILs in treating heavy metal contaminated water.

Nanomaterials as adsorbents for As(III) and As(V) removal from water: A review

Freshwater demand will rise in the next couple of decades, with an increase in worldwide population growth and industrial development. The development activities, on one side, have increased the freshwater demand. However, the ground water has been degraded. Among the various organic and inorganic contaminants, arsenic is one of the most toxic elements. Arsenic contamination in ground waters is a major issue worldwide, especially in South and Southeast Asia. Various methods have been applied to provide a remedy to arsenic contamination, including adsorption, ion exchange, oxidation, coagulation-precipitation and filtration, and membrane filtration. Out of these methods, adsorption of As(III)/As(V) using nanomaterials and biopolymers has been used on a wide scale. The present review focuses on recently used nanomaterials and biopolymer composites for As(III)/As(V) sorptive removal. As(III)/As(V) adsorption mechanisms have been explored for various sorbents. The impacts of environmental factors such as pH and co-existing ions on As(III)/As(V) removal, have been discussed. Comparison of various nanosorbents and biopolymer composites for As(III)/As(V) adsorption and regeneration of exhausted materials has been included. Overall, this review will be useful to understand the sorption mechanisms involved in As(III)/As(V) removal by nanomaterials and biopolymer composites and their comparative sorption performances.

UiO-66(Zr)-derived t-zirconia with abundant lattice defect for remarkably enhanced arsenic removal

Zirconium oxide (ZrO₂) exhibits great potential in the remediation of arsenic-polluted water. In this study, tetragonal zirconium oxide (t-ZrO₂) with high lattice defects was facilely fabricated by regulating the Zr-metal-organic framework (MOF) (UiO-66) with sodium acetate modulator and examined to adsorb arsenic from water. Benefitting from the synergistic effects of mesopores structure and lattice defect, t-ZrO₂ exhibited ultrahigh adsorption capacity and faster kinetics towards both arsenate (As(V)) and arsenite (As(III)). The Langmuir adsorption capacity for As(V) and As(III) of 147.5 mg g^-1 and 352.1 mg g^-1 on t-ZrO₂ in exothermic process, respectively, significantly outperforming reported counterparts in literature (generally ≤100 mg g^-1). The faster adsorption kinetic of both As(III) and As(V) on t-ZrO₂ is defined favorably by the pseudo-second-order model over a wide pH (3-11). Furthermore, arsenic is mainly captured by t-ZrO₂ via forming Zr-O-As bonds through occupying coordinatively unsaturated zirconium atoms adsorption sites revealed by the X-ray photoelectron spectroscopy (XPS) spectrum and Fourier-transformed infrared (FTIR) spectra analysis. This study offers a new strategy for designing ultrahigh performance Zr-MOF-derived adsorbents for capturing arsenic.

Unravelling the catalytic potential of a magnetic CoFe2O4/Cu–ABDC MOF composite in the sustainable synthesis of 2H-indazole motifs

A magnetic CoFe2O4/Cu–ABDC hybrid composite was fabricated for the synthesis of biologically active and pharmacologically significant 2H-indazole scaffolds.

Decorating S-doped Cu-La bimetallic oxides with UIO-66 to increase the As(III) adsorption capacity via synchronous oxidation and adsorption

Arsenite (As(III)) is more toxic and difficult to remove than arsenate (As(V)). In this study, an S-doped Cu-La bimetallic oxide (S-CuLaO) decorated with metal-organic framework (MOF) composite (S-CuLaO@UIO-66) was synthesized and applied for the adsorption of As(III). The maximum adsorption capacity of As(III) by S-CuLaO@UIO-66 was as high as 171 mg/g, which was much higher compared with other MOF compounds reported to date. The UIO-66 support improved the dispersion and reduced the size of the S-CuLaO particles, which increased the number of exposed adsorption reactive sites. Study of the mechanism revealed that the synchronous oxidation and adsorption significantly increased the removal of As(III). O₂^∙- was produced by the receiving electron from the dissolved oxygen from Cu(I) in S-CuLaO, which converted As(III) to As(V). Furthermore, the stability and reusability S-CuLaO@UIO-66 (without regeneration) was investigated at a low As(III) concentration (approximately 1000 µg/L) in deionized water and well water. The residual arsenic concentration ranged from 0.8 to 2.8 μg/L in deionized water and 3-58.2 μg/L in well water within 240 min during three cycles. Generally, this study suggests that combining an optimal oxide with a stable MOF is a promising approach for the fabrication of composite adsorbents.

Probing the catalytic activity of highly efficient sulfonic acid fabricated cobalt ferrite magnetic nanoparticles for the clean and scalable synthesis of dihydro, spiro and bis quinazolinones

An exceptionally productive, rapid, simple, and eco-friendly approach for the synthesis of 2,3-dihydroquinazolin-4(1H)-one has been developed utilizing acidic magnetically retrievable cobalt ferrite nanoparticles (CFNP@SO3H).

A critical review on recent developments in MOF adsorbents for the elimination of toxic heavy metals from aqueous solutions

Effective and substantial remediation of contaminants especially heavy metals from water is still a big challenge in terms of both environmental and biological perspectives because of their adverse effects on the human health. Many techniques including adsorption, ion exchange, co-precipitation, chemical reduction, ultrafiltration, etc. are reported for eliminating heavy metal ions from the water. However, adsorption has preferred because of its simple and easy handlings. Several types of adsorbents are observed and documented well for the purpose. Recently, highly porous metal-organic frameworks (MOFs) were developed by incorporating metals and organic ligands together and claimed as potent adsorbents for the remediation of highly toxic heavy metals from the aqueous solutions due to their unique features like greater surface area, high chemical stability, green and reuse material, etc. In this review, the authors discussed systematically some recent developments about secure MOFs to eliminate the toxic metals such as arsenic (both arsenite and arsenate), chromium(VI), cadmium (Cd), mercury (Hg) and lead (Pb). MOFs are observed as the most efficient adsorbents with greater selectivity as well as high adsorption capacity for metallic contamination. Graphical abstract.

Removal of heavy metals and radionuclides from water using nanomaterials: current scenario and future prospects

There is an increase in concern about the hazardous effects of radioactivity due to the presence of undesirable radioactive substances in our vicinity. Nuclear accidents such as Chernobyl (1986) and Fukushima (2011) have further raised concerns towards such incidents which have led to contamination of water bodies. Conventional methods of water purification are less efficient in decontamination of radioisotopes. They are usually neither cost-effective nor environmentally friendly. However, nanotechnology can play a vital role in providing practical solutions to this problem. Nano-engineered materials like metal oxides, metallic organic frameworks, and nanoparticle-impregnated membranes have proven to be highly efficient in treating contaminated water. Their unique characteristics such as high adsorption capacity, large specific surface area, high tensile strength, and excellent biocompatibility properties make them useful in the field of water purification. This review explores the present status and future prospects of nanomaterials as the next-generation water purification systems that can play an important role in the removal of heavy metals and radioactive contaminants from aqueous solutions.

Preparation and characterization of novel polyoxometalate/CoFe2O4/metal-organic framework magnetic core-shell nanocomposites for the rapid removal of organic dyes from water

In this study, the MIL-101(Cr) metal–organic framework was functionalized with a Dowson-type polyoxometalate (P₂W₁₈O₆₂⁶⁻; POM) and magnetic spinel cobalt ferrite (CoFe₂O₄; CFO) through a hydrothermal route and was characterized by means of FT-IR, XRD, FE-SEM, EDX, BET, and VSM measurements. All analyses confirmed the successful encapsulation of POM (∼32.2 wt%) into the magnetic MIL-101(Cr) framework. Compared to the pristine MIL-101(Cr) MOF, the as-prepared magnetic ternary nanocomposite (abbreviated as POM/CFO/MIL-101(Cr)) demonstrated a notable decrease in both the surface area and pore volume because of the incorporation of CoFe₂O₄ nanoparticles and huge P₂W₁₈O₆₂⁶⁻ polyanions into the cages of the MIL-101(Cr) framework. The POM/CFO/MIL-101(Cr) was then applied as a magnetically separable adsorbent for the rapid elimination of rhodamine B (RhB), methyl orange (MO), and methylene blue (MB) dye pollutants from aqueous solutions. For achieving the optimized conditions, the effects of initial pH, initial dye concentration, temperature, salt effect, and adsorbent dose on MB and RhB elimination were investigated. The dye adsorption isotherms followed the Langmuir model and pseudo-second-order kinetic model. The POM/CFO/MIL-101(Cr) composite material not only exhibited a fast adsorption rate towards dye molecules, but also demonstrated the selective adsorption of the cationic dyes in wastewater. The recycling experiments also demonstrated that the POM/CFO/MIL-101(Cr) adsorbent was highly stable and could be quickly recovered under a magnetic field without any alteration in the structure. The high adsorption capacity, simple fabrication method, rapid separation by a magnet and supreme reusability of the POM/CFO/MIL-101(Cr) nanocomposite make it an attractive adsorbent for the elimination of cationic dyes from wastewater.

The magnetic CoFe₂O₄/MIL-101 (Cr) metal–organic framework nanocomposite containing P₂W₁₈O₆₂⁶⁻ polyoxometalate was fabricated and applied as an ultrafast adsorbent to remove organic dyes from water.

Highly Porous MIL-100(Fe) for the Hydrogen Evolution Reaction (HER) in Acidic and Basic Media

The present study reports the synthesis of a porous Fe-based MOF named MIL-100(Fe) by a modified hydrothermal method without the HF process. The synthesis gave a high surface area with the specific surface area calculated to be 2551 m² g^-1 and a pore volume of 1.407 cm³ g^-1 with an average pore size of 1.103 nm. The synthesized electrocatalyst having a high surface area is demonstrated as an excellent electrocatalyst for the hydrogen evolution reaction investigated in both acidic and alkaline media. As desired, the electrochemical results showed low Tafel slopes (53.59 and 56.65 mV dec^-1), high exchange current densities (76.44 and 72.75 mA cm^-2), low overpotentials (148.29 and 150.57 mV), and long-term stability in both media, respectively. The high activity is ascribed to the large surface area of the synthesized Fe-based metal-organic framework with porous nature.

Recent Progress in Heavy Metal Ion Decontamination Based on Metal-Organic Frameworks

Heavy metals are inorganic pollutants which pose a serious threat to human and environmental safety, and their effective removal is becoming an increasingly urgent issue. Metal-organic frameworks (MOFs) are a novel group of crystalline porous materials, which have proven to be promising adsorbents because of their extremely high surface areas, optimizable pore volumes and pore size distributions. This study is a systematic review of the recent research on the removal of several major heavy metal ions by MOFs. Based on the different structures of MOFs, varying adsorption capacity can be achieved, ranging from tens to thousands of milligrams per gram. Many MOFs have shown a high selectivity for their target metal ions. The corresponding mechanisms involved in capturing metal ions are outlined and finally, the challenges and prospects for their practical application are discussed.

Harnessing the Untapped Catalytic Potential of a CoFe2O4/Mn-BDC Hybrid MOF Composite for Obtaining a Multitude of 1,4-Disubstituted 1,2,3-Triazole Scaffolds

Metal-organic frameworks derived nanostructures with extraordinary variability, and many unprecedented properties have recently emerged as promising catalytic materials to address the challenges in the field of modern organic synthesis. In this contribution, the present work reports the fabrication of an intricately designed magnetic MOF composite based on Mn-BDC (manganese benzene-1,4-dicarboxylate/manganese terephthalate) microflakes via a facile and benign in situ solvothermal approach. Structural information about the as-synthesized hybrid composite has been obtained with characterization techniques such as TEM, SEM, XRD, FT-IR, AAS, EDX, ED-XRF, and VSM analysis. Upon investigation of catalytic performance, the resulting material unveils remarkable efficacy toward facile access of a diverse array of pharmaceutically active 1,2,3-triazoles from a multicomponent coupling reaction of terminal alkynes, sodium azide, and alkyl or aryl halides as coupling partners. In addition to a wide substrate scope, the catalyst with highly accessible active sites also possesses a stable catalytic metal center along with superb magnetic properties that facilitate rapid and efficient separation. The prominent feature that makes this protocol highly desirable is the ambient and greener reaction conditions in comparison to literature precedents reported to date. Further, a plausible mechanistic pathway is also proposed to rationalize the impressive potential of the developed catalytic system in the concerned reaction. We envision that findings from our study would not only provide new insights into the judicious design of advanced MOF based architectures but also pave the way toward greening of industrial manufacturing processes to tackle critical environmental and economic issues.

A Hybrid {Silk@Zirconium MOF} Material as Highly Efficient AsIII-sponge

Exposure of humans to Arsenic from groundwater drinking sources is an acute global public health problem, entailing the urgent need for highly efficient/low-cost Arsenite (As^III) up-taking materials. Herein we present an innovative hybrid-material, ZrMOF@SF_d operating like an “As^III-sponge” with unprecedented efficiency of 1800 mg As^III gr⁻¹. ZrMOF@SF_d consists of a neutral Zirconium Metal-Organic Framework [ZrMOF] covalently grafted on a natural silk-fiber (SF_d). ZrMOF itself exhibits As^III adsorption of 2200 mg gr⁻¹, which supersedes any -so far- known As^ΙΙΙ-sorbent. Using XPS, FTIR, BET-porosimetry data, together with theoretical Surface-Complexation-Modeling (SCM), we show that the high-As^ΙΙΙ-uptake is due to a sequence of two phenomena:[i] at low As^III-concentrations, surface-complexation of H₃AsO₃ results in As^III-coated voids of ZrMOF, [ii] at increased As^III-concentrations, the As^III-coated voids of ZrMOF are filled-up by H₃AsO₃via a partitioning-like mechanism. In a more general context, the present research exemplifies a mind-changing concept, i.e. that a “partitioning-like” mechanism can be operating for adsorption of metalloids, such as H₃AsO_3, by metal oxide materials. So far, such a mechanism has been conceptualized only for the uptake of non-polar organics by natural organic matter or synthetic polymers.

Spinel-type ferrite nanoparticles for removal of arsenic(V) from water

Spinel ferrite particles (Fe₃O₄, MnFe₂O₄, and CoFe₂O₄) were investigated as magnetic nanosorbents for removing arsenic from spiked water samples. The nanosorbents were collected via magnetic separation from aqueous solutions spiked with an arsenic concentration that mimics the amount of this contaminant in real water samples. This research shows that using amounts of CoFe₂O₄ or MnFe₂O₄ as low as 40 mg/L, the arsenic content in the contaminated water decreased for levels below the maximum admitted value by the World Health Organization for drinking waters (10 μg/L). Moreover, these magnetic nanosorbents also showed good performance for As(V) sorption, when applied to aqueous matrices with variable ionic strength and in the mixtures of other several hazardous contaminants. The good performance observed for the MnFe₂O₄ and CoFe₂O₄ ferrites contrasts with the one observed for Fe₃O₄ nanosorbent, whose efficiency is lower in the removal of As(V) from water, nevertheless increased with the presence of other elements in solution.

Fast and efficient aqueous arsenic removal by functionalized MIL-100(Fe)/rGO/δ-MnO2 ternary composites: Adsorption performance and mechanism

Because of its significant toxicological effects on the environment and human health, arsenic (As) is a major global issue. In this study, an Fe-based metal-organic framework (MOF) (Materials of Institut Lavoisier: MIL-100 (Fe)) which was impregnated with reduced graphene oxide (rGO) by using a simple hydrothermal method and coated with birnessite-type manganese oxide (δ-MnO₂) using the one-pot reaction process (MIL-100(Fe)/rGO/δ-MnO₂ nanocomposites) was synthesized and applied successfully in As removal. The removal efficiency was rapid, the equilibrium was achieved in 40 min and 120 min for As(III) and As(V), respectively, at a level of 5 mg/L. The maximum adsorption capacities of As(III) and As(V) at pH 2 were 192.67 mg/g and 162.07 mg/g, respectively. The adsorbent revealed high stability in pH range 2-9 and saturated adsorbent can be fully regenerated at least five runs. The adsorption process can be described by the pseudo-second-order kinetic model and Langmuir monolayer adsorption. The adsorption mechanisms consisted of electrostatic interaction, oxidation and inner sphere surface complexation.

Critical review of magnetic biosorbents: Their preparation, application, and regeneration for wastewater treatment

The utilisation of magnetic biosorbents (metal or metal nanoparticles impregnated onto biosorbents) has attracted increasing research attention due to their manipulable active sites, specific surface area, pore volume, pore size distribution, easy separation, and reusability that are suitable for remediation of heavy metal(loid)s and organic contaminants. The properties of magnetic biosorbents (MB) depend on the raw biomass, properties of metal nanoparticles, modification/synthesis methods, and process parameters which influence the performance of removal efficiency of organic and inorganic contaminants. There is a lack of information regarding the development of tailored materials for particular contaminants and the influence of specific characteristics. This review focuses on the synthesis/modification methods, application, and recycling of magnetic biosorbents. In particular, the mechanisms and the effect of sorbents properties on the adsorption capacity. Ion exchanges, electrostatic interaction, precipitation, and complexation are the dominant sorption mechanisms for ionic contaminants whereas hydrophobic interaction, interparticle diffusion, partition, and hydrogen bonding are the dominant adsorption mechanisms for removal of organic contaminants by magnetic biosorbents. In generally, low pyrolysis temperatures are suitable for ionic contaminants separation, whereas high pyrolysis temperatures are suitable for organic contaminants removal. Additionally, magnetic properties of the biosorbents are positively correlated with the pyrolysis temperatures. Metal-based functional groups of MB can contribute to an ion exchange reaction which influences the adsorption capacity of ionic contaminants and catalytic degradation of non-persistent organic contaminants. Metal modified biosorbents can enhance adsorption capacity of anionic contaminants significantly as metal nanoparticles are not occupying positively charged active sites of the biosorbents. Magnetic biosorbents are promising adsorbents in comparison with other adsorbents including commercially available activated carbon, and thermally and chemically modified biochar in terms of their removal capacity, rapid and easy magnetic separation which allow multiple reuse to minimize remediation cost of organic and inorganic contaminants from wastewater.

Differently shaped nanocrystalline (Fe, Y)3O4 and its adsorption efficiency toward inorganic arsenic species

Herein we report effects of partial substitution of Fe³⁺ by Y³⁺ in magnetite (Fe₃O₄) on morphology and inorganic arsenic species adsorption efficiency of the Fe_3-x Y _x O₄ nanoparticles formed. The series of Fe_3-x Y _x O₄ (x = 0.00, 0.042 and 0.084, labeled as Y00, Y05 and Y10, respectively) was synthesized using co-precipitation followed by microwave-hydrothermal treatment (MW) at 200 °C. With increase of yttrium content (x value), both the morphological inhomogeneity of the samples and the fraction of spinel nanorods as compared to spinel pseudospherical particles increased. By both transmission electron microscopy and x-ray powder diffraction analyses, it was determined that the direction of growth of the spinel nanorods is along the [110] crystallographic direction. The Fe_3-x Y _x O₄ affinities of adsorption toward the inorganic arsenic species, As(III) (arsenite, AsO₃ ^3-) and As(V) (arsenate, AsO₄ ^3-), were investigated. Increased Y³⁺ content related to changes in sample morphology was followed by a decrease of As(III) removal efficiency and vice versa for As(V). The increase in Y³⁺ content, in addition to increasing the adsorption capacity for As(V), significantly expanded the optimum pH range for the maximum removal and decreased the contact time for necessary 50% removal (t _1/2) of As(V) (Y00: pH 2-3, t _1/2 = 3.12 min; Y05: pH 2-6, t _1/2 = 2.12 min and Y10: pH 2-10, t _1/2 = 1.12 min). The results point to incorporation of Y³⁺ in the crystal lattice of magnetite, inducing nanorod spinel structure formation with significant changes in sorption properties important for the removal of inorganic arsenic from waters.

Metal-organic frameworks for aquatic arsenic removal

Effective remediation of arsenic contaminated water remains a critical task from the environmental perspective, owing to the harmful effects of arsenic on human health and the environment. Recently, highly porous metal-organic frameworks (MOFs) with excellent chemical stability and abundant functional groups represent a significant new addition to the area of capturing aquatic arsenic pollutants. This review focuses on the development of MOF-based materials for the efficient removal of toxic arsenic species from aqueous solutions. Aspects related to the materials' characteristics, application performance and interaction mechanisms are systematically studied, referencing the macroscopic experimental behaviors and microscopic spectroscopy analyses. The properties of various MOF-based materials are assessed and compared with those of other conventionally used materials. At last, insights and perspectives are suggested in terms of future research directions and development challenges. Overall, this class of materials demonstrates a promising potential for aquatic arsenic removal, and with a proper up-scaling development might it be used for practical applications in the near future.

Environmental remediation of heavy metal ions by novel-nanomaterials: A review

Recently, novel-nanomaterials with excellent sorption capacities, mild stability, and environmental-friendly performance, have enabled massive developments in capturing heavy metal ions. This review firstly introduces the preparation and modification of novel-nanomaterials (e.g., MOFs, nZVI, MXenes, and g-C₃N₄). Then, the heavy metal ions' sorption properties and the impact of environmental conditions have been discussed. Subsequently, the sorption mechanisms are verified through batch experiments, spectral analysis, surface complexation models, and theoretical calculations. Finally, the applications prospects of novel-nanomaterials in removing heavy metal ion polluted water have also been discussed, which provide perspective for future in-depth research and practical applications.

Expanding the Horizon of Multicomponent Oxidative Coupling Reaction via the Design of a Unique, 3D Copper Isophthalate MOF-Based Catalyst Decorated with Mixed Spinel CoFe2O4 Nanoparticles

This work discloses the first ever magnetically retrievable copper isophthalate-based metal-organic framework (MOF) decorated with surface-modified cobalt ferrite (CoFe2O4) nanoparticles that have been utilized as catalytic reactors for obtaining a relatively large number of biologically active benzimidazole scaffolds. A facile one-pot solvothermal approach was employed for obtaining spherical and monodisperse CoFe2O4 nanoparticles, which were subsequently modified using suitable protecting and functionalizing agents. Finally, these functionalized magnetic nanoparticles were anchored onto the three-dimensional copper isophthalate MOF via a covalent immobilization methodology. The exploitation of advanced microscopic tools such as transmission electron microscopy and scanning electron microscopy provided valuable insights into the morphology of the immobilized MOF. These results indicated that the surface-modified magnetic nanoparticles had grown onto the surface of copper-5-nitroisophthalic acid MOF. A greener C-H functionalization strategy that involves the multicomponent oxidative cross-coupling between two different set of amines (sp2-hybridized nitrogen-containing anilines and sp3-hybridized nitrogen-containing alkyl/aryl amine derivatives) and sodium azide has been incorporated to provide access to a broad spectrum of the value-added target benzimidazole moieties. It is interesting to note that this magnetic MOF-catalyzed protocol not only replaces toxic solvents with water, which is a green solvent, but also enhances the economic competitiveness since the magnetic catalyst can be readily recovered and recycled for eight consecutive runs.

Advances of magnetic nanoparticles in environmental application: environmental remediation and (bio)sensors as case studies

Nanotechnology is an emerging technique drawing increasing attentions in biomedical, electronic, environmental, and industrial application. Nanoparticles (NPs) possess unique optical, electrical, catalytic, and thermal properties, among which magnetic NPs (MNPs) are one of the most important groups with excellent superparamagnetism property, large surface area, and biocompatibility. In this review, methods for synthesizing and functionalizing MNPs are summarized and linked to their applications in environmental science as either adsorbents or catalysts for removing contaminants from environmental matrices, illustrating stronger reactivity, higher removal capacity, and fast kinetics. Additionally, we also comprehensively discuss the application of MNPs as (bio)sensors to selectively and sensitively detect the presence of environmental contaminants or pathogenic bacteria. This work summarizes the recent progresses of using MNPs as powerful tools in environmental science and engineering, raising their state-of-art application from environmental perspectives and benefiting researchers interested in NPs and environmental studies.

Water-stable metal-organic frameworks for aqueous removal of heavy metals and radionuclides: A review

Heavy metals and radionuclides in water are a global environmental issue, which has been receiving considerable attention worldwide. Water-stable MOFs are green and recyclable materials to eliminate the environmental impacts caused by the hazardous heavy metal ions and radionuclides in water. This paper presents a systematical review on the current status of water-stable MOFs that capture and convert a wide range of heavy metal ions (e.g., As(III)/As(V), Pb(II), Hg(II), Cd(II), and Cr(III)/Cr(VI)) and radionuclides (e.g., U(VI), Se(IV)/Se(VI) and Cs(I)) in aqueous solution. Water-stable MOFs and MOF-based composites exhibit the superior adsorption capability for these metal species in water. Significantly, MOFs show high selectivity in capturing target metal ions even in the presence of multiple water constituents. Mechanisms involved in capturing metal ions are described. MOFs also have excellent catalytic performance (photocatalysis and catalytic reduction by formic acid) for Cr(VI) conversion to Cr(III). Future research is suggested to provide insightful guidance to enhance the performance of the MOFs in capturing target pollutants in aquatic environment.

Arsenic removal from water by metal-organic framework MIL-88A microrods

Fe-based metal-organic framework MIL-88A microrods were synthesized by hydrothermal method, which were used to adsorb As(V) in water for the first time. The experimental results indicated that MIL-88A has a very fast adsorption rate towards arsenic in water. The kinetic and isothermal data for arsenic removal were better fitted to the pseudo-second-order kinetic model and Langmuir model, respectively, implying a chemical and monolayer adsorption for As(V) on MIL-88A microrods. Two rate-controlling processes during adsorption were revealed by the intraparticle diffusion model. The maximum adsorption capacity of MIL-88A reached 145 mg g^-1, higher than those of Fe-based MIL adsorbents reported previously, which probably originates from its unique microstructure with abundant OH^- groups and an unusual large swelling towards water. These show that Fe-based MIL-88A is a good candidate for arsenic removal.

Metal-organic framework-based materials: superior adsorbents for the capture of toxic and radioactive metal ions

Highly efficient removal of metal ion pollutants, such as toxic and nuclear waste-related metal ions, remains a serious task from the biological and environmental standpoint because of their harmful effects on human health and the environment. Recently, highly porous metal-organic frameworks (MOFs), with excellent chemical stability and abundant functional groups, have represented a new addition to the area of capturing various types of hazardous metal ion pollutants. This review focuses on recent progress in reported MOFs and MOF-based composites as superior adsorbents for the efficient removal of toxic and nuclear waste-related metal ions. Aspects related to the interaction mechanisms between metal ions and MOF-based materials are systematically summarized, including macroscopic batch experiments, microscopic spectroscopy analysis, and theoretical calculations. The adsorption properties of various MOF-based materials are assessed and compared with those of other widely used adsorbents. Finally, we propose our personal insights into future research opportunities and challenges in the hope of stimulating more researchers to engage in this new field of MOF-based materials for environmental pollution management.

Iron Mesh-Based Metal Organic Framework Filter for Efficient Arsenic Removal

Efficient oxidation from arsenite [As(III)] to arsenate [As(V)], which is less toxic and more readily to be adsorbed by adsorbents, is important for the remediation of arsenic pollution. In this paper, we report a metal organic framework (MIL-100(Fe)) filter to efficiently remove arsenic from synthetic groundwater. With commercially available iron mesh as a substrate, MIL-100(Fe) is implanted through an in situ growth method. MIL-100(Fe) is able to capture As(III) due to its microporous structure, superior surface area, and ample active sites for As adsorption. This approach increases the localized As concentration around the filter, where Fenton-like reactions are initiated by the Fe²⁺/Fe³⁺ sites within the MIL-100(Fe) framework to oxidize As(III) to As(V). The mechanism was confirmed by colorimetric detection of H₂O₂, fluorescence, and electron paramagnetic resonance detection of ·OH. With the aid of oxygen bubbling and Joule heating, the removal efficiency of As(III) can be further boosted. The MIL-100(Fe)-based filter also exhibits satisfactory structural stability and recyclability. Notably, the adsorption capacity of the filter can be regenerated satisfactorily. Our results demonstrate the potential of this filter for the efficient remediation of As contamination in groundwater.

Nanofibers of resorcinol-formaldehyde for effective adsorption of As (III) ions from mimicked effluents

In the present study, the core-shell structured RF/PVA nanofibers have been developed and used for the adsorption of As³⁺ ions from the mimicked liquid effluents. Efficient-facile fabrication of the structured nanofibers (300-417 nm diameter) was accomplished using facile electrospinning technique. Chi parameter (χ = 25.56) and free energy of mixing (E_mix = 17.19 kcal/mol) calculated via molecular dynamics simulations depicted compatibility of the polymeric system resulting supermolecular core-shell nanofibers, whose adsorption results were also supported by the FE-SEM, FT-IR, and UV-VIS spectroscopy analysis. The adsorption analysis was performed using both linear and non-linear regression methods, for kinetic models and adsorption isotherms. The developed nanofibers demonstrated an adsorption capacity of 11.09 mg/g at a pH of 7, and an adsorption efficiency of 97.46% on protracted exposure, which is even adaptable at high temperatures with 93.1% reclamation. FE-SEM analysis and FT-IR spectra confirm the adsorption of As (III) ions on RF/PVA nanofibers and the presence of embedded hydrophilic oxygen sites for metal ion adsorption. The developed RF/PVA nanofibers demonstrate scalability in fabrication, low-cost, recycling, and less solid waste generation, depicting the large-scale applicability in removing arsenic ions from effluent waste. Graphical Abstract ᅟ.