Metal release from stainless steel particles in vitro-influence of particle size

Visible particles in parenteral drug products: A review of current safety assessment practice

Parenteral drug products (PDPs) are administered extensively to treat various diseases. Product quality plays a critical role in ensuring patient safety and product efficacy. One important quality challenge is the contamination of particles in PDPs. Particle presence in PDPs represents potential safety risk to patients. Differential guidance and practice have been in place for visible (VPs) and subvisible particles (SVPs) in PDPs. For SVPs, the amount limits have been harmonized in multiple Pharmacopeias. The pharmaceutical industry follows the guided limits for regulatory and quality compliance. However, for VPs, no such acceptable limit has been set. This results in not only quality but also safety challenges for manufacturers and drug developers in managing and evaluating VPs. It is important to understand the potential safety risk of VPs so these can be weighed against the benefit of the PDPs. To evaluate their potential risk(s), it is necessary to understand their nature, origin, frequency of their occurrence, safety risk, the risk mitigation measures, and the method to evaluate their safety. The current paper reviews the critical literature on these aspects and provides insight into considerations when performing safety assessment and managing the risk(s) for VPs in PDPs.

In vitro inhalation bioaccessibility and health risk assessment of difenoconazole in the atmosphere

BACKGROUND

Assessment of the risk of pesticide inhalation in populations around farmland is necessary because inhalation is one of the ways in which pesticides can risk human health. This study aimed to identify the inhalation risk of difenoconazole on humans by using dose-response and exposure assessments.

RESULTS

In the field simulation application, respiratory exposure in populations around farmland ranged from 71 to 430 ng/m3 . Using response surface methodology, the maximum bioaccessibility of difenoconazole in three simulated lung fluids was 35.33% in Gamble's solution (GS), 34.12% in artificial lysosomal fluid (ALF), and 42.06% in simulated interstitial lung fluid (SLF). Taking the proliferation activity of the A549 cell model as the endpoint, the benchmark dose limit and benchmark dose of difenoconazole on A549 cells were 16.36 and 5.60 mg/kg, respectively. The margin of exposure to difenoconazole in GS, ALF and SLF were, respectively, 8.66 × 105 to 5.28 × 106 , 8.97 × 105 to 5.47 × 106 and 7.28 × 105 to 4.44 × 106 .

CONCLUSION

The risk assessment results indicate that under all circumstances, applying difenoconazole is safe for populations around farmland. However, a fan-shaped nozzle, suspension concentrate and greater inhalation height increase the risk of inhalation. © 2023 Society of Chemical Industry.

A multi-residue method for the analysis of organic pollutants released from atmospheric PM2.5 in simulated biological fluids: Inhalation bioaccessibility and bioavailability estimation

BACKGROUND

In recent decades, there has been a growing interest within the scientific community regarding the study of the fraction that could be released in simulated biological fluids to estimate in vitro bioaccessibility and bioavailability of compounds. Concerning particulate matter (PM), studies were essentially focused on metal (oid)s probably due to more complex methodologies needed for organic compounds, requiring extraction and pre-concentration steps from simulated fluids, followed by chromatographic analysis. Thus, the development of a simple and sensitive methodology for the analysis of multi-class organic compounds released in different inhalation simulated fluids would represent a great contribution to the field.

RESULTS

In this work, a methodology for the analysis of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols released in simulated fluids from PM2.5 samples was developed. After a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) and a simulated body fluid (SBF, filling a dialysis membrane) to obtain in vitro inhalation bioaccessible and bioavailable fractions, respectively; compounds were determined by a vortex-assisted liquid-liquid extraction (VALLE) and a subsequent analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). Experimental conditions concerning VALLE extraction (extraction time and amount of NaCl (g)) were optimized by using a central composite design (CCD), best MS/MS transitions were selected and matrix-matched calibration combined with use of labelled subrogate standards provided high sensitivity, minimization of matrix effects and recovering losses compensation.

SIGNIFICANCE

The successful validation results obtained for most of the compounds demonstrated the effectiveness of the proposed methodology for the analysis of multi-class organic pollutants released in ALF and SBF for inhalation bioaccessibility and bioavailability assessment, respectively. Furthermore, applicability of the method was proved by analysing 20 p.m.2.5 samples, being the proposed in vitro PBET dialyzability approach for assessing organic pollutant's inhalation bioavailability applied to PM2.5 samples for the first time.

Oral and inhalation bioaccessibility of mercury in contaminated soils and potential health risk to the kidneys and neurodevelopment of children in Taiwan

Health risk assessments of exposure to mercury (Hg) from soils via ingestion and inhalation are indispensable for Taiwanese people living in the vicinity of Hg-contaminated sites. In this study, anthropogenic soils were collected from various polluted sources in Taiwan. In vitro oral and inhalation bioaccessible fractions of Hg were analyzed to avoid from overestimating the exposure risk. Discrepancies in oral and inhalation bioaccessible levels of Hg in soils were found using different in vitro assays with different pH levels and chemical compositions. The freshly contaminated soil (soil S7) polluted by chlor-alkali production activity sampled before the site was remediated had the highest total Hg concentration of 1346 mg/kg, with the highest oral bioaccessibility of 26.2% as analyzed by SW-846 Method 1340 and inhalation bioaccessibility of 30.5% as analyzed by modified Gamble's solution. The lesser extent of aging of Hg in soil S7 increased the Hg availability for humans, which was also found based on results of a sequential extraction procedure. Results of the hazard quotient showed that soil ingestion was the main pathway causing non-carcinogenic risks for children and adults. Children were also exposed to higher risks than were adults due to higher frequencies of hand-to-mouth behaviors and lower body weights. Furthermore, hazard index results adjusted for oral and inhalation bioaccessible Hg were lower than those obtained based on the total Hg content; however, an unacceptable value of the non-carcinogenic risk (> 1) for children living near soil S7 was still observed. This study suggests that children living near sites polluted for a short period of time may suffer potential renal effects regardless of the bioaccessibility. Our findings provide suggestions for decision makers on setting new strategies for managing risks of Hg-contaminated soils in Taiwan.

The new WHO air quality guidelines for PM2.5: predicament for small/medium cities

The global burden of disease estimated that approximately 7.1 million deaths worldwide were related to air pollution in 2016. However, only a limited number of small- and middle-sized cities have air quality monitoring networks. To date, air quality in terms of particulate matter is still mainly focused on mass concentration, with limited compositional monitoring even in mega cities, despite evidence indicating differential toxicity of particulate matter. As this evidence is far from conclusive, we conducted PM_2.5 bioaccessibility studies of potentially harmful elements in a medium-sized city, Londrina, Brazil. The data was interpreted in terms of source apportionment, the health risk evaluation and the bioaccessibility of inorganic contents in an artificial lysosomal fluid. The daily average concentration of PM_2.5 was below the WHO guideline, however, the chemical health assessment indicated a considerable health risk. The in vitro evaluation showed different potential mobility when compared to previous studies in large-sized cities, those with 1 million inhabitants or more (Curitiba and Manaus). The new WHO guideline for PM_2.5 mass concentration puts additional pressure on cities where air pollution monitoring is limited and/or neglected, because decision making is mainly revenue-driven and not socioeconomic-driven. Given the further emerging evidence that PM chemical composition is as, or even more, important than mass concentration levels, the research reported in the paper could pave the way for the necessary inter- and intra-city collaborations that are needed to address this global health challenge.

Bioavailability and regional transport of PM2.5 during heavy haze episode in typical coal city site of Fenwei Plain, China

Despite the decrease in anthropogenic emissions, haze episodes were still frequent in the Fenwei Plain, which was identified as one of the three key areas for air pollution control. Herein, PM_2.5 samples were collected to investigate the influence of festival effect during the Chinese Spring Festival from February 2rd to 13th, 2019, in Linfen on the Fenwei Plain. The characteristics of element pollution, enrichment factor, source apportionment, regional transport of PM_2.5, and health risk assessment were discussed. Meanwhile, the simulated lung fluid method (SLF) was carried out to accurately assess the inhalation risks of heavy metals (HMs). Results indicated that the average concentration of PM_2.5 was 195.6 μg·m^-3 during the studying period. Road fugitive dust (15.6%), firework burning source (25.6%), industrial emission (30.5%), and coal combustion (28.3%) were identified by positive matrix factorization (PMF) modeling. Using the HYSPLIT trajectory model, air masses from the central Shaanxi, southern Hebei, and northern Henan were the dominant transport paths during the Spring Festival, which contributed 21.9 and 41.2% of total trajectories, respectively. The findings that high PSCF and CWT levels were found in central Shaanxi, southern Hebei, and northern Henan were confirmed. The SLF mean bioaccessibility (%) of the solubility of particulate metals was in order of Mn > Ni > Sb > Ba > Zn > Pb > Cr. However, the carcinogenic risk value of Cr was the highest, exceeding the maximum acceptable risk. The present study provided important information for further analyzing the air pollution cause of Fenwei Plain.

Compost and microbial biostimulant applications improve plant growth and soil biological fertility of a grass-based phytostabilization system

In this work, a grass-based phytoremediation system integrated with an organic amendment and biostimulants was evaluated for remediating contaminated sites. Plant growth and biological fertility were monitored to assess the efficacy of a vegetative cap used as a safety measure to reduce sanitary and environmental risks of industrially contaminated soils and soil-washing sludges. Both matrices were potentially contaminated with Pb and Zn with an ecological risk index from low to moderate. According to potentially toxic elements (PTEs) bioaccessibility tests, the exposure to the released fine particulate matter may cause serious risks to human beings, in particular to children. The grass mixture was well adapted to both the substrates and a low PTEs mobility was detected, thus, reducing the leaching risk to ground water sources. Compost addition augmented significantly nitrogenase reductase (nifH) and ammonia monooxygenase (amoA) gene expression abundance in both substrates. Furthermore, a positive interaction between compost fertilization and a Trichoderma-based biostimulant inoculation was recorded in sludges resulting in a significant stimulation of nitrogen-fixing and ammonia-oxidizing bacteria. The application of compost and biostimulant increased soil fertility and plant growth. Furthermore, there was a slight reduction in PTE bioaccessibility, thus, improving the efficiency of the phytostabilization, limiting the resuspension and dispersion of the health-risk soil particulate.

In-vitro inhalation bioavailability estimation of Metal(oid)s in atmospheric particulate matter (PM2.5) using simulated alveolar lysosomal fluid: A dialyzability approach

A novel in-vitro method, by using synthetic body fluids, human physiological conditions and a simulated air-blood barrier (by using a dialysis membrane) has been developed and applied to assess in-vitro inhalation bioavailability of metal(oid)s associated to particulate matter (PM_2,5) samples collected from an industrial site of the Northwest of Spain. A validated analytical methodology based on inductively coupled plasma mass spectrometry (ICP-MS) was used to analyse metal(oid)s concentrations in bioavailable fractions. This approach would be a more realistic human health risk assessment since considering processes that occur in human body in contrast the overestimation derived from current models (which consider environmental concentrations). Metal(oid)s such as Cu and Mo seemed to be the most bioavailable (mean in-vitro bioavailability ratios higher than 70%); Ba, Cd, Mn, Pb, Rb, Sb, Sn, V and Zn shown mean ratios between 20 and 60%, while low in-vitro bioavailability ratios (less than 20%) were observed for metal(oid)s such as Al, Co, Cr, Fe, Ni, Ti, and Tl. Health risk assessment via inhalation based on hazard carcinogenic and non-carcinogenic indexes (HI_c and HI_nc, respectively) were performed considering three exposure scenarios using both inhalation bioavailable and total metal(oid)s concentrations in PM_2.5 samples, suggesting no risk to human health. The influence of chemical composition on in-vitro bioavailability ratios was obtained, pointing out that inhalation ratios of Al, Ba, Cr, Cu, Fe, Ni, Pb and V seem to be affected by sea salt and/or crustal and/or biogenic and/or anthropogenic content of PM_2.5.

Sub-cellular sequestration of alkaline drugs in lysosomes: new insights for pharmaceutical development of lysosomal fluid

Background and purpose

Lysosomal-targeted drug delivery can open a new strategy for drug therapy. However, there is currently no universally accepted simulated or artificial lysosomal fluid utilized in the pharmaceutical industry or recognized by the United States Pharmacopeia (USP).

Experimental procedure

We prepared a simulated lysosomal fluid (SLYF) and compared its composition to a commercial artificial counterpart. The developed fluid was used to test the dissolution of a commercial product (Robitussin^®) of a lysosomotropic drug (dextromethorphan) and to investigate in-vitro lysosomal trapping of two model drugs (dextromethorphan and (+/-) chloroquine).

Findings/Results

The laboratory-prepared fluid or SLYF contained the essential components for the lysosomal function in concentrations reflective of the physiological values, unlike the commercial product. Robitussin^® passed the acceptance criteria for the dissolution of dextromethorphan in 0.1 N HCl medium (97.7% in less than 45 min) but not in the SLYF or the phosphate buffer media (72.6% and 32.2% within 45 min, respectively). Racemic chloroquine showed higher lysosomal trapping (51.9%) in the in-vitro model than dextromethorphan (28.3%) in a behavior supporting in-vivo findings and based on the molecular descriptors and the lysosomal sequestration potential of both.

Conclusion and implication

A standardized lysosomal fluid was reported and developed for in-vitro investigations of lysosomotropic drugs and formulations.

Bioaccessibility, source and human health risk of Pb, Cd, Cu and Zn in windowsill dusts from an area affected by long-term Pb smelting

Non-ferrous metal smelting results in heterogenous spatial distribution of potentially toxic metals (PTM) near smelters. In this work, windowsill dusts were collected from smelting (SA) and urban (UJ) sub-areas of Jiyuan (a city affected by >70 years of Pb smelting) to investigate PTM source and bioaccessibility. The <10 μm fraction of dusts were analyzed for total and bioaccessible Pb, Cd, Cu and Zn concentrations; bioaccessibility was analyzed by a three-stage assay (i.e., lung phase, gastric phase and gastrointestinal phase) using artificial lysosomal fluid (ALF, L phase) followed by simulated gastric and gastrointestinal fluids (G and GI phases). This assay mimicked the movement of particles phagocytosed by alveolar macrophages in the respiratory system, then transported up the oropharynx and subsequently swallowed and transported into the digestive system. Zinc had greater bioaccessible concentrations in L and GI phases than other metals, and the mean L phase bioaccessible PTM concentrations in SA were greater than in UJ. The mean L + GI phase bioaccessible concentrations of Pb, Cd, Cu and Zn in SA were 280, 79, 124 and 1458 mg kg^-1, while those in UJ were 215, 54, 116 and 598 mg kg^-1, respectively. The L phase extracted 87.7 to 98.8 % of PTM within the L + GI assay. Lead had a lower L + GI bioaccessibility than Cd, Cu and Zn (70-76 % vs. 82-92 %). Higher tolerable Cd carcinogenic risks based on bioaccessibility were found in SA sub-area than in UJ while no carcinogenic or non-carcinogenic risk was found for other metals. Lead isotopic ratios indicated that both Pb ore and smelting bottom ash contributed to dust Pb accumulation in SA, while coal burning, lead ore, Pb smelting bottom ash and diesel engine exhaust contributed to dust Pb accumulation in UJ. Overall, results indicated heterogenous distribution of PTM source and bioaccessibility in the vicinity of Pb smelters.

Inhalation bioaccessibility of multi-class organic pollutants associated to atmospheric PM2.5: Correlation with PM2.5 properties and health risk assessment

Inhalation exposure to fine particulate matter (PM_2.5) represents a global concern due to the adverse effects in human health. In the last years, scientific community has been adopted the assessment of the PM_2.5-bound pollutant fraction that could be released (bioaccessible fraction) in simulated lung fluids (SLFs) to achieve a better understanding of PM risk assessment and toxicological studies. Thus, bioaccessibility of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols in PM_2.5 samples was evaluated. The proposed method consists of a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) to obtain bioaccessible fractions, followed by a vortex-assisted liquid-liquid microextraction (VALLME) and a final analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). The highest inhalation bioaccessibility ratio was found for bisphenol A (BPA) with an average of 83%, followed by OPFRs, PAEs and PAHs (with average bioaccessibilities of 68%, 41% and 34%, respectively). Correlations between PM_2.5 composition (major ions, trace metals, equivalent black carbon (eBC) and UV-absorbing particulate matter (UVPM)) and bioaccessibility ratios were also assessed. Principal Component Analysis (PCA) suggested that PAHs, PAES and OPFRs bioaccessibility ratios could be positively correlated with PM_2.5 carbonaceous content. Furthermore, both inverse and positive correlations on PAHs, PAEs and OPFRs bioaccessibilites could be accounted for some major ions and metal (oid)s associated to PM_2.5, whereas no correlations comprising considered PM_2.5 major ions and metal (oid)s contents and BPA bioaccessibility was observed. In addition, health risk assessment of target PM_2.5-associated PAHs via inhalation was assessed in the study area considering both total and bioaccessible concentrations, being averaged human health risks within the safe carcinogenic and non-carcinogenic levels.

Dissolution Rate of Nanomaterials Determined by Ions and Particle Size under Lysosomal Conditions: Contributions to Standardization of Simulant Fluids and Analytical Methods

Dissolution of inhaled engineered nanomaterials (ENM) under physiological conditions is essential to predict the clearance of the ENM from the lungs and to assess their biodurability and the potential effects of released ions. Alveolar macrophage (AM) lysosomes contain a pH 4.5 saline brine with enzymes and other components. Different types of artificial phagolysosomal simulant fluids (PSFs) have been developed for dissolution testing, but the consequence of using different media is not known. In this study, we tested to which extent six fundamentally different PSFs affected the ENM dissolution kinetics and particle size as determined by a validated transmission electron microscopy (TEM) image analysis. Three lysosomal simulant media were consistent with each other and with in vivo clearance. These media predict the quick dissolution of ZnO, the partial dissolution of SiO2, and the very slow dissolution of TiO2. The valid media use either a mix of organic acids (with the total concentration below 0.5 g/L, thereof citric acid below 0.15 g/L) or another organic acid (KH phthalate). For several ENM, including ZnO, BaSO4, and CeO2, all these differences induce only minor modulation of the dissolution rates. Only for TiO2 and SiO2, the interaction with specific organic acids is highly sensitive, probably due to sequestration of the ions, and can lead to wrong predictions when compared to the in vivo behavior. The media that fail on TiO2 and SiO2 dissolution use citric acid at concentrations above 5 g/L (up to 28 g/L). In the present selection of ENM, fluids, and methods, the different lysosomal simulant fluids did not induce changes of particle morphology, except for small changes in SiO2 and BaSO4 particles most likely due to ion dissolution, reprecipitation, and coalescence between neighboring particles. Based on the current evidence, the particle size by TEM analysis is not a sufficiently sensitive analytical method to deduce the rate of ENM dissolution in physiological media. In summary, we recommend the standardization of ENM dissolution testing by one of the three valid lysosomal simulant fluids with determination of the dissolution rate and halftime by the quantification of ions. This recommendation was established for a continuous flow system but may be relevant as well for static (batch) solubility testing.

Safe traveling in public transport amid COVID-19

Several intensive policies, such as mandatorily wearing masks and practicing social distancing, have been implemented in South Korea to prevent the spread of the novel coronavirus disease (COVID-19). We analyzed and measured the impact of the aforementioned policies by calculating the degree of infection exposure in public transport. Specifically, we simulated how passengers encounter and infect each other during their journeys in public transport by tracking movements of passengers. The probabilities of exposure to infections in public transport via the aforementioned preventive measures were compared by using the Susceptible, Exposed, Infected, and Recovered model, a respiratory infectious disease diffusion model. We determined that the mandatory wearing of masks exhibits effects similar to maintaining 2-m social distancing in preventing COVID-19. Mandatory wearing of masks and practicing social distancing with masks during peak hours reduced infection rates by 93.5 and 98.1%, respectively.

Simulated biological fluids - a systematic review of their biological relevance and use in relation to inhalation toxicology of particles and fibres

The use of simulated biological fluids (SBFs) is a promising in vitro technique to better understand the release mechanisms and possible in vivo behaviour of materials, including fibres, metal-containing particles and nanomaterials. Applications of SBFs in dissolution tests allow a measure of material biopersistence or, conversely, bioaccessibility that in turn can provide a useful inference of a materials biodistribution, its acute and long-term toxicity, as well as its pathogenicity. Given the wide range of SBFs reported in the literature, a review was conducted, with a focus on fluids used to replicate environments that may be encountered upon material inhalation, including extracellular and intracellular compartments. The review aims to identify when a fluid design can replicate realistic biological conditions, demonstrate operation validation, and/or provide robustness and reproducibility. The studies examined highlight simulated lung fluids (SLFs) that have been shown to suitably replicate physiological conditions, and identify specific components that play a pivotal role in dissolution mechanisms and biological activity; including organic molecules, redox-active species and chelating agents. Material dissolution was not always driven by pH, and likewise not only driven by SLF composition; specific materials and formulations correspond to specific dissolution mechanisms. It is recommended that SLF developments focus on biological predictivity and if not practical, on better biological mimicry, as such an approach ensures results are more likely to reflect in vivo behaviour regardless of the material under investigation.

Thoracic Fraction (PM10) of Resuspended Urban Dust: Geochemistry, Particle Size Distribution and Lung Bioaccessibility

A fluidized bed aerosol generator was connected to a 13-stage cascade impactor (nanoMOUDI) for the size fractionation of urban dust (<10 µm), followed by the gravimetric analysis of loaded PTFE filter samples. This method was used to characterize the PM10 (thoracic) fraction of road dust sampled from expressways, arterial roads and local roads in Toronto, Canada. The fine particle fractions (<1.8 µm) of all the studied samples accounted for 51–72% of the resuspended PM10 (by weight). Elemental analysis using ICP-MS and ICP-OES revealed an overall trend of element enrichment in the <1.8 µm fraction compared to the coarse fraction (1.8–10 µm) of the road dust. By contrast, archived house dust samples displayed the reverse trend for most elements. The lung bioaccessibility of target elements (Al, B, Ba, Co, Cr, Fe, La, Mn, Mo, Sb, Sr, Ti, V and Zn) was assessed for each road dust fraction using 0.1 M ammonium citrate (pH 4.4) to simulate intracellular fluid and Gamble solution (pH 7.2) to simulate interstitial lung fluid. The <1.8 µm fraction of local road dust displayed significantly higher bioaccessibility (p < 0.05) for Zn when using Gamble solution, and for seven out of the 14 target elements when using ammonium citrate. These results show the importance of characterizing the fine fraction of road dust.

Simulation of respiratory tract lining fluid for in vitro dissolution study

Introduction: Drug particles inhaled via the respiratory system must first dissolve in the respiratory tract lining fluid (RTLF) that lies on the surfaces of airways and alveoli, so that they are absorbed and have therapeutic action. Artificial simulated RTLFs are often used for in vitro dissolution studies to determine the solubility and dissolution of inhaled drug particles. Such studies can be used to predict bioavailability minimizing the requirement for in vivo studies. Numerous studies have been conducted to develop bio-relevant simulated RTLFs; however, to date, there is no singular simulated RTLF that closely resembles human RTLF.Areas covered: This review focuses on the composition of natural and simulated RTLFs and their use in in vitro dissolution studies.Expert opinion: There is variation in the composition and thickness of RTLF along the respiratory tract. Identification of the actual concentration of components of endogenous RTLF present in different areas of the respiratory tract helps in the development of region-specific simulated RTLFs. It is recommended that region-specific simulated RTLFs can be prepared by varying concentration of major RTLF components like mucus/gel simulants, lipids/surfactants, peptides/proteins, and inorganic/organic salts.

Bioaccessibility of potentially toxic metals in soil, sediments and tailings from a north Africa phosphate-mining area: Insight into human health risk assessment

The risk assessment of phosphate mining/processing industrial activities on the environment and human health is crucial to properly manage and minimize the risks over time. In this work, we studied the inhalation and dermal bioaccessibility of potentially toxic metals (PTM) in different particle-size fractions of urban soil, sediments and tailings from Gafsa-Metlaoui phosphate mining area, to assess afterwards the non-carcinogenic (NCR) and carcinogenic (CR) risks for the health of local citizens and workers constantly exposed to airborne particulate matter (PM) originating from these sources of contamination. Samples were separated in particle-size fractions by centrifugation and consecutive cycles of sedimentation and decanting. The pseudo-total concentrations and bioaccessible fractions of PTM were extracted by aqua regia and in vitro bioaccessibility tests, respectively. Both sediments and tailings showed higher-than-background concentrations of PTM (mainly Cd, Zn and Cr), with a tendency to accumulate these metals in fine particles (<10 μm). In urban soil, only Cd was above the background concentration. The bioaccessibility of PTM via inhalation was significantly higher in artificial lysosomal fluid (ALF) than in simulated epithelial lung fluid (SELF): basically, Cd was the most bioaccessible metal (relative bioaccessibility up to 80%), followed by the medium-to-high bioaccessible Zn (47%), Pb (46%) and Cu (39%), and the least bioaccessible Cr (16%). In synthetic skin surface liquid (NIHS 96-10), only Cd was bioaccessible at worrying extent (20-44%). On the basis of US.EPA risk assessment, the exposure to PTM bioaccessible fractions or pseudo-total concentrations would not cause serious NCR and CR risks for human health. Significant health risks (Hazard Index >1 and CR > 10^-4), especially for children, can occur if ingestion route is also considered. The findings underline the need for adequate protection of contaminated soil, sediments and mine tailings laying nearby urban agglomerates, to reduce the health risks for inhabitants and workers of Gafsa-Metlaoui mining area.

Critical Choices in Predicting Stone Wool Biodurability: Lysosomal Fluid Compositions and Binder Effects

The hazard potential, including carcinogenicity, of inhaled man-made vitreous fibers (MMVFs) is correlated with their biodurability in the lung, as prerequisite for biopersistence. Abiotic dissolution testing serves to predict biodurability. We re-analyzed the International Agency for Research on Cancer Monograph on MMVFs and found that the correlation between in vivo biopersistence and abiotic dissolution presented therein confounded different simulant fluids and further confounded evaluation of leaching vs structural elements. These are critical choices for abiotic dissolution testing, as are binder removal and the rate of the flow that removes ions during testing. Therefore, we experimentally demonstrated how fluid composition and binder affect abiotic dissolution of a representative stone wool MMVF. We compared six simulant fluids (all pH 4.5, reflecting the environment of alveolar macrophage lysosomes) that differed in organic acids, which have a critical role in their ability to modulate the formation of Si-rich gels on the fiber surfaces. Removing the binder accelerates the average dissolution rate by +104% (max. + 273%) across the fluids by suppression of gel formation. Apart from the high-citrate fluid that predicted a 10-fold faster dissolution than is observed in vivo, none of the five other fluids resulted in dissolution rates above 400 ng/cm²/h, the limit associated with the exoneration from classification for carcinogenicity in the literature. These findings were confirmed with and without binder. For corroboration, five more stone wool MMVFs were assessed with and without binder in one specific fluid. Again, the presence of the binder caused gel formation and reduced dissolution rates. To enhance the reliability and robustness of abiotic predictions of biodurability, we recommend replacing the critically influential citric acid in pH 4.5 fluids with other organic acids. Also, future studies should consider structural transformations of the fibers, including changes in fiber length, fiber composition, and reprecipitation of gel layers.

Atomic Absorption Spectrometry Methods to Access the Metal Solubility of Aerosols in Artificial Lung Fluid

Recent studies to quantify the health risks that fine particulate matter with an aerodynamic less than 2.5 µm (PM_2.5) pose use in vitro approaches. One of these approaches is to incubate PM_2.5 in artificial lysosomal fluid for a given period at body temperature. These body fluids used have a high ionic strength and as such can be challenging samples to analyze with atomic spectroscopy techniques. As PM_2.5 is a primary health hazard because it is tiny enough to penetrate deep into the lungs and could, in addition, dissolve in the lung fluid it is important to quantify elements of toxic and/or carcinogenic concerns, reliably and accurately. Sophisticated instrumentation and expensive pre-treatment of challenging samples are not always available, especially in developing countries. To evaluate the applicability of graphite furnace atomic absorption spectrometry (GFAAS) without Zeeman correction capability to detect trace quantities of heavy metals leached from PM_2.5 on to artificial lung fluid, univariate and multivariate approaches have been used for optimization purposes. The limits of quantification, LOQ, obtained by the optimized method were: 2 µg L^-1 (Cu), 3 µg L^-1 (Cr), 1 µg L^-1 (Mn), and 10 µg L^-1 (Pb). The addition/recovery experiments had a mean accuracy of: (Cu) 99 ± 7%; 110 ± 8% (Cr); 95 ± 9% (Mn), and 96 ± 11% (Pb). The average soluble fractions of PM_2.5 incubated in artificial lysosomal fluid (ALF) for 1 h were: 1.2 ± 0.01 ng m^-3 Cu, 0.4 ± 0.01 ng m^-3 Cr, 0.6 ± 0.01 ng m^-3 Mn, and 4.8 ± 0.03 ng m^-3 Pb. Using historical elemental averages of PM_2.5 in Curitiba (Cu 3.3 ng m^-3, Cr 2.1 ng m^-3, Mn 6.1 ng m^-3, Pb 21 ng m^-3), the percentage bioaccessibility were determined to be Cu 38%, Cr 20%, Mn 10%, and Pb 23%. The elemental values of the atmospheric soluble fraction of Cu, Cr, and Mn were below the inhalation risk concentrations. However, for Pb, the atmospheric soluble fraction exceeded the inhalation unit risk of 0.012 ng m^-3. This robust and straightforward GF AAS method is pivotal for low and middle-income countries were most air pollution adverse effects occur and established lower-cost technologies are likely unavailable.

In vitro lung and gastrointestinal bioaccessibility of potentially toxic metals in Pb-contaminated alkaline urban soil: The role of particle size fractions

Potentially toxic metals (PTMs), associated with different size particles in soil, may play an important role in adverse health effect and risk for human. The objective is to evaluate the lung and gastrointestinal bioaccessibility and risk of PTMs in Pb-contaminated alkaline urban soil depending on the particle size fractions. The size fractions of 50-250 μm, 5-50 μm, 1-5 μm, <1 μm in Pb-contaminated alkaline urban soil from Baoji Heavy Industrial Base City, NW China, were screened by Sequential Wet Sieving Separation Procedure (SWSSP) based on Stokes' Law. The concentrations of 9 potentially toxic metals (As, Ba, Co, Cr, Cu, Mn, Ni, Pb and Zn) in each particle size fractions were characterized by ICP-OES and ICP-MS, and the in vitro bioaccessibility dependent of size fractions were evaluated by the simulation fluids of Artificial Lysosomal Fluid (ALF) and Gamble for lung, PBET, SBET, IVG, SBRC, UBM for gastric and intestinal, respectively. Health risks were assessed considering simulated external exposure using intestinal and lung bioaccessibility. The lung and gastrointestinal bioaccessibility and exposure risks of PTMs in fine particle size (i.e. <1 μm) was higher than larger particle size fractions (i.e. 50-250 μm, 5-50 μm, 1-5 μm), however, some different variations of bioaccessibility observed the simulation fluids and time dependent. In case of single PTMs, the lung bioaccessibilities of PTMs in ALF were higher than those in Gamble fluids, most prominent in Co, Cu, Mn and Zn, while the gastrointestinal [G + I] bioaccessibility of PTMs was less than those in gastric [G], like Cu, Mn, Pb and Zn mostly. The non-carcinogenic risks of these PTMs to children via inhalation were acceptable and higher than those of adults, but reverse for carcinogenic risk. Comparatively, the non-carcinogenic and carcinogenic risks of PTMs via ingestion pathway were both higher than those for adults. Although the risks from ingestion were in acceptable range, the total carcinogenic risks for children were more than 10^-4, which would bring carcinogenic risks and should be paid attention to. It was noted that the toxic metal, Co in all size fractions was the most important contributor for noncarcinogenic risks and Cr mostly for carcinogenic risks via inhalation pathway for adults and children in local areas. However, Pb was the most important contributor for noncarcinogenic risk both for adults and children via ingestion pathway relative to Co and Cr for carcinogenic risks through hand-to-mouth ingestion. Those observations demonstrated the important role that the smaller particle fractionations in Pb-contaminated alkaline soil played in both bioaccessibility and the refinement of human health-risk assessments for the inhalation and ingestion pathway.

In vitro inhalation bioaccessibility procedures for lead in PM2.5 size fraction of soil assessed and optimized by in vivo-in vitro correlation

In order to assess and optimize frequently used in vitro inhalation bioaccessibility procedures for heavy metals in the inhalation risk assessment, in vivo inhalation bioavailability of Pb in simulated atmosphere fine particles (PM_2.5) from aging soils spiked with lead compounds and field soils in lead-zinc mining areas was investigated via intranasally instilled experiments with these PM_2.5 suspensions to mice and Pb bioaccessibility was extracted by using four frequently used in vitro procedures (Gamble Solution, simulated lung fluid, simulated epithelial lung fluid and artificial lysosomal fluid). Mouse exposure experiments showed that Pb was mainly distributed in the liver, kidneys, blood and spleen. Based on the kidney model, in vitro inhalation bioaccessibility of Pb extracted with optimized Gamble Solution, in which solid to liquid ratio (S/L) was optimized to 1:1000 g ml^-1 and DTPA was proved to be the key effective component, showed a strong linear relationship with its in vivo inhalation bioavailability (y = 1.07x - 3.86, R² = 0.73). Moreover, in vitro bioaccessible and bioavailable fractions of Pb were mainly from acid exchangeable and reducible fractions of Pb in PM_2.5. Altogether, optimized Gamble Solution was suggested for the analysis of in vitro bioaccessibility for risk-based assessments.

An Investigation into the Accumulation of Air Borne Trace Metals in the Lungs of Common Myna Acridotheres tristis and Bank Myna Acridotheres ginginianus Captured from Urban and Semi Urban Areas of Lahore and Pattoki, Pakistan

With increasing urbanization and industrialization, clean air is becoming a scarce resource. During the present investigation, concentrations of metals (Pb, Ni and Zn) in the atmosphere and their subsequent deposition in the lungs of two common avian species, common myna, Acridotheres tristis (n = 30) and bank myna, A. ginginianus (n = 20), captured from urban areas of Lahore city and semi-urban areas of Pattoki city 80 km away from main city of Lahore were determined. The obtained results were analyzed statistically using Independent sample t test and Pearson's correlation. A comparison of trace metal concentrations in air of both the cities was also carried out. Statistically, significant variations were recorded for Pb (t (7) = - 4.276, p = 0.001) while non-significant differences were observed for both Ni (t (7) = 0.049, p = 0.962) and Zn (t (7) = 1.555, p = 0.146).

The influence that different urban development models has on PM2.5 elemental and bioaccessible profiles

Limited studies have reported on in-vitro analysis of PM_2.5 but as far as the authors are aware, bioaccessibility of PM_2.5 in artificial lysosomal fluid (ALF) has not been linked to urban development models before. The Brazilian cities Manaus (Amazon) and Curitiba (South region) have different geographical locations, climates, and urban development strategies. Manaus drives its industrialization using the free trade zone policy and Curitiba adopted a services centered economy driven by sustainability. Therefore, these two cities were used to illustrate the influence that these different models have on PM_2.5in vitro profile. We compared PM_2.5 mass concentrations and the average total elemental and bioaccessible profiles for Cu, Cr, Mn, and Pb. The total average elemental concentrations followed Mn > Pb > Cu > Cr in Manaus and Pb > Mn > Cu > Cr in Curitiba. Mn had the lowest solubility while Cu showed the highest bioaccessibility (100%) and was significantly higher in Curitiba than Manaus. Cr and Pb had higher bioaccessibility in Manaus than Curitiba. Despite similar mass concentrations, the public health risk in Manaus was higher than in Curitiba indicating that the free trade zone had a profound effect on the emission levels and sources of airborne PM. These findings illustrate the importance of adopting sustainable air quality strategies in urban planning.

A quick and simple in vitro assay to predict bioavailability of actinides following accidental exposure

Physicochemical properties of actinides highly influence internal intake and biodistribution. An a priori knowledge of the dissolution properties of compounds involved in accidental exposure would be of great help in early dose assessment. However, this information is rarely available, leading to difficulties in interpreting excretion data from contaminated victims. We developed an in vitro acellular assay to predict in vivo bioavailability of actinides and improve medical handling of the victims. Various actinides of different physicochemical properties were used to validate the reliability of the assay to mimic in vivo behavior of the contaminants. Our assay was designed as a dynamic muticompartmental system in which an agarose gel represents the retention compartment of actinides and a dynamic phase the transfer compartment. Relevant physiological conditions were obtained by introducing various components both in the static and dynamic phases. The proposed model may provide a good prediction of in vivo behavior and could be used as a first assessment to predict the fraction of actinides that could be potentially transferred from retention compartments, as well as the fraction available to chelating drugs.

Methodological factors influencing inhalation bioaccessibility of metal(loid)s in PM2.5 using simulated lung fluid

In this study, methodological factors influencing the dissolution of metal(loid)s in simulated lung fluid (SLF) was assessed in order to develop a standardised method for the assessment of inhalation bioaccessibility in PM_2.5. To achieve this aim, the effects of solid to liquid (S/L) ratio (1:100 to 1:5000), agitation (magnetic agitation, occasional shaking, orbital and end-over-end rotation), composition of SLF (artificial lysosomal fluid: ALF; phagolysosomal simulant fluid: PSF) and extraction time (1-120 h) on metal(loid) bioaccessibility were investigated using PM_2.5 from three Australian mining/smelting impacted soils and a certified reference material. The results highlighted that SLF composition significantly (p < 0.001) influenced metal(loid) bioaccessibility and that when a S/L ratio of 1:5000 and end-over-end rotation was used, metal(loid) solubility plateaued after approximately 24 h. Additionally, in order to assess the exposure of metal(loid)s via incidental ingestion of surface dust, PM_2.5 was subjected to simulated gastro-intestinal tract (GIT) solutions and the results were compared to extraction using SLF. Although As bioaccessibility in SLF (24 h) was significantly lower than in simulated GIT solutions (p < 0.05), Pb bioaccessibility was equal to or significantly higher than that extracted using simulated GIT solutions (p < 0.05).

A critical review of approaches and limitations of inhalation bioavailability and bioaccessibility of metal(loid)s from ambient particulate matter or dust

Inhalation of metal(loid)s in ambient particulate matter (APM) represents a significant exposure pathway to humans. Although exposure assessment associated with this pathway is currently based on total metal(loid) content, a bioavailability (i.e. absorption in the systemic circulation) and/or bioaccessibility (i.e. solubility in simulated lung fluid) based approach may more accurately quantify exposure. Metal(loid) bioavailability-bioaccessibility assessment from APM is inherently complex and lacks consensus. This paper reviews the discrepancies that impede the adoption of a universal protocol for the assessment of inhalation bioaccessibility. Exposure assessment approaches for in-vivo bioavailability, in-vitro cell culture and in-vitro bioaccessibility (composition of simulated lungs fluid, physico-chemical and methodological considerations) are critiqued in the context of inhalation exposure refinement. An important limitation of bioavailability and bioaccessibility studies is the use of considerably higher than environmental metal(loid) concentration, which diminishing their relevance to human exposure scenarios. Similarly, individual metal(loid) studies have been criticised due to complexities of APM metal(loid) mixtures which may impart synergistic or antagonistic effects compared to single metal(loid) exposure. Although a number of different simulated lung fluid (SLF) compositions have been used in metal(loid) bioaccessibility studies, information regarding the comparative leaching efficiency among these different SLF and comparisons to in-vivo bioavailability data is lacking. In addition, the particle size utilised is often not representative of what is deposited in the lungs while assay parameters (extraction time, solid to liquid ratio, temperature and agitation) are often not biologically relevant. Research needs are identified in order to develop robust in-vitro bioaccessibility protocols for the assessment or prediction of metal(loid) bioavailability in APM for the refinement of inhalation exposure.

Lung bioaccessibility of contaminants in particulate matter of geological origin

Human exposure to particulate matter (PM) has been associated with adverse health effects. While inhalation exposure to airborne PM is a prominent research subject, exposure to PM of geological origin (i.e., generated from soil/soil-like material) has received less attention. This review discusses the contaminants in PM of geological origin and their relevance for human exposure and then evaluates lung bioaccessibility assessment methods and their use. PM of geological origin can contain toxic elements as well as organic contaminants. Observed/predicted PM lung clearance times are long, which may lead to prolonged contact with lung environment. Thus, certain exposure scenarios warrant the use of in vitro bioaccessibility testing to predict lung bioavailability. Limited research is available on lung bioaccessibility test development and test application to PM of geological origin. For in vitro tests, test parameter variation between different studies and concerns about physiological relevance indicate a crucial need for test method standardization and comparison with relevant animal data. Research is recommended on (1) developing robust in vitro lung bioaccessibility methods, (2) assessing bioaccessibility of various contaminants (especially polycyclic aromatic hydrocarbons (PAHs)) in PM of diverse origin (surface soils, mine tailings, etc.), and (3) risk characterization to determine relative importance of exposure to PM of geological origin.

Solubility-driven toxicity of CuO nanoparticles to Caco2 cells and Escherichia coli: Effect of sonication energy and test environment

Due to small size and high surface energy nanoparticles (NPs) tend to agglomerate and precipitate. To avoid/diminish that, sonication of NPs stock suspensions prior toxicity testing is often applied. Currently, there is no standardized particle sonication protocol available leading to inconsistent toxicity data, especially if toxicity is driven by NPs' dissolution that may be enhanced by sonication. In this study we addressed the effect of sonication on hydrodynamic size (Dh), dissolution and toxicity of copper oxide (CuO) NPs to mammalian cell line Caco-2 in vitro and bacteria Escherichia coli in the respective test environments (cell culture MEM medium, bacterial LB medium and deionised (DI) water). NPs were suspended using no sonication, water bath and probe sonication with different energy intensities. Increased sonication energy (i) decreased the Dh of CuO NPs in all three test environments; (ii) increased dissolution of NPs in MEM medium and their toxicity to Caco-2; (iii) increased dissolution of NPs in LB medium and their bioavailability to E. coli; and (iv) had no effect on dissolution and antibacterial effects of NPs in DI water. Thus, to reduce variations in dissolution and toxicity, we recommend sonication of NPs in DI water following the dilution into suitable test media.

In vitro toxicity evaluation of silica-coated iron oxide nanoparticles in human SHSY5Y neuronal cells

Iron oxide nanoparticles (ION) have been widely used in biomedical applications, for both diagnosis and therapy, due to their unique magnetic properties. They are intensively explored in neuromedicine mostly because of their ability to cross the blood brain barrier. Hence, their potential harmful effects on neuronal cells need to be carefully assessed. The objective of this study was to evaluate the toxicity of silica-coated ION (S-ION) (10-200 μg ml-1) on human neuronal SHSY5Y cells. Alterations in the cell cycle, cell death by apoptosis or necrosis, and membrane integrity were assessed as cytotoxicity parameters. Genotoxicity was determined by a γH2AX assay, a micronucleus (MN) test, and a comet assay. Complementarily, possible effects on DNA damage repair were also analysed by means of a DNA repair competence assay. All analyses were performed in complete and serum-free cell culture media. Iron ion release from the nanoparticles was notable only in complete medium. Despite being effectively internalized by the neuronal cells, S-ION presented in general low cytotoxicity; positive results were only obtained in some assays at the highest concentrations and/or the longest exposure time tested (24 h). Genotoxicity evaluations in serum-free medium were negative for all conditions assayed; in complete medium, dose and time-dependent increase in DNA damage not related to the production of double strand breaks or chromosome loss (according to the results of the γH2AX assay and MN test), was obtained. The presence of serum slightly influenced the behaviour of S-ION; further studies to investigate the formation of a protein corona and its role in nanoparticle toxicity are necessary.

Analytical methods for assessing metal bioaccessibility in airborne particulate matter: A scoping review

In contrast to the existence of standardized methods to assess metal bioaccessibility via the gastrointestinal route, there are no widely-accepted, established in vitro testing protocols to measure elemental solubility in the human lung. This may be attributed, in part, to the difficulty associated with simulating the lung's complex in vivo conditions. The purpose of this review is two-fold: (1) to determine how the bioaccessibility of metals associated with ambient particulate matter (PM) in the human lung has been assessed in the literature, and (2) examine the suitability and biological relevance of applied methods for the measurement of metal bioaccessibility employed to date. The review revealed that limited attention has been paid to the development and application of biologically-relevant in vitro methods to measure elemental solubility in ambient PM as a proxy for bioaccessibility in the human lung. Few studies (n=14) used synthetic lung fluids to simulate in vivo conditions, with only half extracting samples at a biologically-relevant temperature of 37°C. There was limited evidence suggesting that the use of water is less effective as a leaching agent compared to simulated lung fluids. In sum, this scoping review highlights a critical need to develop standardized methods for the systematic assessment of elemental bioaccessibility via the respiratory route. Priority should be placed on the validation of biologically-relevant methods, including the use of leaching agents and extraction parameters used, which allow for testing to be conducted in a reliable, yet cost efficient, manner.

Bioaccessibility of metals in alloys: evaluation of three surrogate biofluids

Bioaccessibility in vitro tests measure the solubility of materials in surrogate biofluids. However, the lack of uniform methods and the effects of variable test parameters on material solubility limit interpretation. One aim of this study was to measure and compare bioaccessibility of selected economically important alloys and metals in surrogate physiologically based biofluids representing oral, inhalation and dermal exposures. A second aim was to experimentally test different biofluid formulations and residence times in vitro. A third aim was evaluation of dissolution behavior of alloys with in vitro lung and dermal biofluid surrogates. This study evaluated the bioaccessibility of sixteen elements in six alloys and 3 elemental/metal powders. We found that the alloys/metals, the chemical properties of the surrogate fluid, and residence time all had major impacts on metal solubility. The large variability of bioaccessibility indicates the relevancy of assessing alloys as toxicologically distinct relative to individual metals.

Inhalation toxicity of 316L stainless steel powder in relation to bioaccessibility

The Globally Harmonized System for Classification and Labelling of Chemicals (GHS) considers metallic alloys, such as nickel (Ni)-containing stainless steel (SS), as mixtures of substances, without considering that alloys behave differently compared to their constituent metals. This study presents an approach using metal release, explained by surface compositional data, for the prediction of inhalation toxicity of SS AISI 316L. The release of Ni into synthetic biological fluids is >1000-fold lower from the SS powder than from Ni metal, due to the chromium(III)-rich surface oxide of SS. Thus, it was hypothesized that the inhalation toxicity of SS is significantly lower than what could be predicted based on Ni metal content. A 28-day inhalation study with rats exposed to SS 316L powder (<4 µm, mass median aerodynamic diameter 2.5–3.0 µm) at concentrations up to 1.0 mg/L showed accumulation of metal particles in the lung lobes, but no signs of inflammation, although Ni metal caused lung toxicity in a similar published study at significantly lower concentrations. It was concluded that the bioaccessible (released) fraction, rather than the elemental nominal composition, predicts the toxicity of SS powder. The study provides a basis for an approach for future validation, standardization and risk assessment of metal alloys.

Surface-protein interactions on different stainless steel grades: effects of protein adsorption, surface changes and metal release

Implantation using stainless steels (SS) is an example where an understanding of protein-induced metal release from SS is important when assessing potential toxicological risks. Here, the protein-induced metal release was investigated for austenitic (AISI 304, 310, and 316L), ferritic (AISI 430), and duplex (AISI 2205) grades in a phosphate buffered saline (PBS, pH 7.4) solution containing either bovine serum albumin (BSA) or lysozyme (LSZ). The results show that both BSA and LSZ induce a significant enrichment of chromium in the surface oxide of all stainless steel grades. Both proteins induced an enhanced extent of released iron, chromium, nickel and manganese, very significant in the case of BSA (up to 40-fold increase), whereas both proteins reduced the corrosion resistance of SS, with the reverse situation for iron metal (reduced corrosion rates and reduced metal release in the presence of proteins). A full monolayer coverage is necessary to induce the effects observed.

Metal release from stainless steel powders and massive sheets--comparison and implication for risk assessment of alloys

Industries that place metal and alloy products on the market are required to demonstrate that they are safe for all intended uses, and that any risks to humans, animals or the environment are adequately controlled. This requires reliable and robust in vitro test procedures. The aim of this study is to compare the release of alloy constituents from stainless steel powders of different grades (focus on AISI 316L) and production routes into synthetic body fluids with the release of the same metals from massive sheets in relation to material and surface characteristics. The comparison is justified by the fact that the difference between massive surfaces and powders from a metal release/dissolution and surface perspective is not clearly elucidated within current legislations. Powders and abraded and aged (24 h) massive sheets were exposed to synthetic solutions of relevance for biological settings and human exposure routes, for periods of up to one week. Concentrations of released iron, chromium, nickel, and manganese in solution were measured, and the effect of solution pH, acidity, complexation capacity, and proteins elucidated in relation to surface oxide composition and its properties. Implications for risk assessments based on in vitro metal release data from alloys are elucidated.

Manganese in occupational arc welding fumes--aspects on physiochemical properties, with focus on solubility

Physicochemical properties, such as particle sizes, composition, and solubility of welding fumes are decisive for the bioaccessibility of manganese and thereby for the manganese cytotoxic and neurotoxic effects arising from various welding fumes. Because of the diverse results within the research on welding fume solubility, this article aims to review and discuss recent literature on physicochemical properties of gas metal arc welding, shielded metal arc welding, and flux-cored arc welding fumes, with focus on solubility properties. This article also presents a short introduction to the literature on arc welding techniques, health effects from manganese, and occupational exposure to manganese among welders.

Cellular dose of partly soluble Cu particle aerosols at the air-liquid interface using an in vitro lung cell exposure system

BACKGROUND

There is currently a need to develop and test in vitro systems for predicting the toxicity of nanoparticles. One challenge is to determine the actual cellular dose of nanoparticles after exposure.

METHODS

In this study, human epithelial lung cells (A549) were exposed to airborne Cu particles at the air-liquid interface (ALI). The cellular dose was determined for two different particle sizes at different deposition conditions, including constant and pulsed Cu aerosol flow.

RESULTS

Airborne polydisperse particles with a geometric mean diameter (GMD) of 180 nm [geometric standard deviation (GSD) 1.5, concentration 10(5) particles/mL] deposited at the ALI yielded a cellular dose of 0.4-2.6 μg/cm(2) at pulsed flow and 1.6-7.6 μg/cm(2) at constant flow. Smaller polydisperse particles in the nanoregime (GMD 80 nm, GSD 1.5, concentration 10(7) particles/mL) resulted in a lower cellular dose of 0.01-0.05 μg/cm(2) at pulsed flow, whereas no deposition was observed at constant flow. Exposure experiments with and without cells showed that the Cu particles were partly dissolved upon deposition on cells and in contact with medium.

CONCLUSIONS

Different cellular doses were obtained for the different Cu particle sizes (generated with different methods). Furthermore, the cellular doses were affected by the flow conditions in the cell exposure system and the solubility of Cu. The cellular doses of Cu presented here are the amount of Cu that remained on the cells after completion of an experiment. As Cu particles were partly dissolved, Cu (a nonnegligible contribution) was, in addition, present and analyzed in the nourishing medium present beneath the cells. This study presents cellular doses induced by Cu particles and demonstrates difficulties with deposition of nanoparticles at the ALI and of partially soluble particles.

Effect of sonication and serum proteins on copper release from copper nanoparticles and the toxicity towards lung epithelial cells

Abstract Different methodological settings can influence particle characteristics and toxicity in nanotoxicology. The aim of this study was to investigate how serum proteins and sonication of Cu nanoparticle suspensions influence the properties of the nanoparticles and toxicological responses on human lung epithelial cells. This was investigated by using methods for particle characterization (photon correlation spectroscopy and TEM) and Cu release (atomic absorption spectroscopy) in combination with assays for analyzing cell toxicity (MTT-, trypan blue- and Comet assay). The results showed that sonication of Cu nanoparticles caused decreased cell viability and increased Cu release compared to non-sonicated particles. Furthermore, serum in the cell medium resulted in less particle agglomeration and increased Cu release compared with medium without serum, but no clear difference in toxicity was detected. Few cells showed intracellular Cu nanoparticles due to fast release/dissolution processes of Cu. In conclusion; sonication can affect the toxicity of nanoparticles.

Bioaccessibility, bioavailability and toxicity of commercially relevant iron- and chromium-based particles: in vitro studies with an inhalation perspective

BACKGROUND

Production of ferrochromium alloys (FeCr), master alloys for stainless steel manufacture, involves casting and crushing processes where particles inevitably become airborne and potentially inhaled. The aim of this study was to assess potential health hazards induced by inhalation of different well-characterized iron- and chromium-based particles, i.e. ferrochromium (FeCr), ferrosiliconchromium (FeSiCr), stainless steel (316L), iron (Fe), chromium (Cr), and chromium(III)oxide (Cr2O3), in different size fractions using in vitro methods. This was done by assessing the extent and speciation of released metals in synthetic biological medium and by analyzing particle reactivity and toxicity towards cultured human lung cells (A549).

RESULTS

The amount of released metals normalized to the particle surface area increased with decreasing particle size for all alloy particles, whereas the opposite situation was valid for particles of the pure metals. These effects were evident in artificial lysosomal fluid (ALF) of pH 4.5 containing complexing agents, but not in neutral or weakly alkaline biological media. Chromium, iron and nickel were released to very low extent from all alloy particles, and from particles of Cr due to the presence of a Cr(III)-rich protective surface oxide. Released elements were neither proportional to the bulk nor to the surface composition after the investigated 168 hours of exposure. Due to a surface oxide with less protective properties, significantly more iron was released from pure iron particles compared with the alloys. Cr was predominantly released as Cr(III) from all particles investigated and was strongly complexed by organic species of ALF. Cr2O3 particles showed hemolytic activity, but none of the alloy particles did. Fine-sized particles of stainless steel caused however DNA damage, measured with the comet assay after 4 h exposure. None of the particles revealed any significant cytotoxicity in terms of cell death after 24 h exposure.

CONCLUSION

It is evident that particle and alloy characteristics such as particle size and surface composition are important aspects to consider when assessing particle toxicity and metal release from alloy particles compared to pure metal particles. Generated results clearly elucidate that neither the low released concentrations of metals primarily as a result of protective and poorly soluble surface oxides, nor non-bioavailable chromium complexes, nor the particles themselves of occupational relevance induced significant acute toxic response, with exception of DNA damage from stainless steel.

Bioaccessibility studies of ferro-chromium alloy particles for a simulated inhalation scenario: a comparative study with the pure metals and stainless steel

The European product safety legislation, REACH, requires that companies that manufacture, import, or use chemicals demonstrate safe use and high level of protection of their products placed on the market from a human health and environmental perspective. This process involves detailed assessment of potential hazards for various toxicity endpoints induced by the use of chemicals with a minimum use of animal testing. Such an assessment requires thorough understanding of relevant exposure scenarios including material characteristics and intrinsic properties and how, for instance, physical and chemical properties change from the manufacturing phase, throughout use, to final disposal. Temporary or permanent adverse health effects induced by particles depend either on their shape or physical characteristics, and/or on chemical interactions with the particle surface upon human exposure. Potential adverse effects caused by the exposure of metal particles through the gastrointestinal system, the pulmonary system, or the skin, and their subsequent potential for particle dissolution and metal release in contact with biological media, show significant gaps of knowledge. In vitro bioaccessibility testing at conditions of relevance for different exposure scenarios, combined with the generation of a detailed understanding of intrinsic material properties and surface characteristics, are in this context a useful approach to address aspects of relevance for accurate risk and hazard assessment of chemicals, including metals and alloys and to avoid the use of in vivo testing. Alloys are essential engineering materials in all kinds of applications in society, but their potential adverse effects on human health and the environment are very seldom assessed. Alloys are treated in REACH as mixtures of their constituent elements, an approach highly inappropriate because intrinsic properties of alloys generally are totally different compared with their pure metal components. A large research effort was therefore conducted to generate quantitative bioaccessibility data for particles of ferro-chromium alloys compared with particles of the pure metals and stainless steel exposed at in vitro conditions in synthetic biological media of relevance for particle inhalation and ingestion. All results are presented combining bioaccessibility data with aspects of particle characteristics, surface composition, and barrier properties of surface oxides. Iron and chromium were the main elements released from ferro-chromium alloys upon exposure in synthetic biological media. Both elements revealed time-dependent release processes. One week exposures resulted in very small released particle fractions being less than 0.3% of the particle mass at acidic conditions and less than 0.001% in near pH-neutral media. The extent of Fe released from ferro-chromium alloy particles was significantly lower compared with particles of pure Fe, whereas Cr was released to a very low and similar extent as from particles of pure Cr and stainless steel. Low release rates are a result of a surface oxide with passive properties predominantly composed of chromium(III)-rich oxides and silica and, to a lesser extent, of iron(II,III)oxides. Neither the relative bulk alloy composition nor the surface composition can be used to predict or assess the extent of metals released in different synthetic biological media. Ferro-chromium alloys cannot be assessed from the behavior of their pure metal constituents.

Particles, sweat, and tears: a comparative study on bioaccessibility of ferrochromium alloy and stainless steel particles, the pure metals and their metal oxides, in simulated skin and eye contact

Ferrochromium alloys are manufactured in large quantities and placed on the global market for use as master alloys (secondary raw materials), primarily for stainless steel production. Any potential human exposure to ferrochromium alloy particles is related to occupational activities during production and use, with 2 main exposure routes, dermal contact and inhalation and subsequent digestion. Alloy and reference particles exposed in vitro in synthetic biological fluids relevant for these main exposure routes have been investigated in a large research effort combining bioaccessibility; chemical speciation; and material, surface, and particle characteristics. In this paper, data for the dermal exposure route, including skin and eye contact, will be presented and discussed. Bioaccessibility data have been generated for particles of a ferrochromium alloy, stainless steel grade AISI 316L, pure Fe, pure Cr, iron(II,III)oxide, and chromium(III)oxide, upon immersion in artificial sweat (pH 6.5) and artificial tear (pH 8.0) fluids for various time periods. Measured released amounts of Fe, Cr, and Ni are presented in terms of average Fe and Cr release rates and amounts released per amount of particles loaded. The results are discussed in relation to bulk and surface composition of the particles. Additional information, essential to assess the bioavailability of Cr released, was generated by determining its chemical speciation and by providing information on its complexation and oxidation states in both media investigated. The effect of differences in experimental temperature, 30 degrees C and 37 degrees C, on the extent of metal release in artificial sweat is demonstrated. Iron was the preferentially released element in all test media and for all time periods and iron-containing particles investigated. The extent of metal release was highly pH dependent and was also dependent on the medium composition. Released amounts of Cr and Fe were very low (close to the limit of detection, <0.008% of particles released or dissolved as iron or chromium) for the alloy particles (ferrochromium alloy and stainless steel), the pure Cr particles, and the metal oxide particles. The released fraction of Cr (Cr/[Cr + Fe]) varied with the material investigated, the test medium, and the exposure time and cannot be predicted from either the bulk or the surface composition. Chromium was released as noncomplexed Cr(III) and in addition in very low concentrations (<3 microg/L). Nickel released was under the limit of detection (0.5 microg/L), except for ultrafine stainless steel particles (<10 microg/L). It is evident that media chemistry and material properties from a bulk and surface perspective, as well as other particle characteristics, and the chemical speciation of released metals have to be considered when assessing any potential hazard or risk induced by sparingly soluble metal or alloy particles.

Metal release rate from AISI 316L stainless steel and pure Fe, Cr and Ni into a synthetic biological medium--a comparison

Metal release rates from stainless steel grade 316L were investigated in artificial lysosomal fluid (ALF), simulating a human inflammatory cell response. The main focus was placed on release rates of main alloying elements using graphite furnace atomic absorption spectroscopy, and changes in surface oxide composition by means of X-ray photoelectron spectroscopy. To emphasise that alloys and pure metals possess totally different intrinsic properties, comparative studies were performed on the pure alloying constituents: iron, nickel and chromium. Significant differences in release rates were observed due to the presence of a passive surface film on stainless steel. Iron and nickel were released at rates more than 300 times lower from the 316L alloy compared with the pure metals whereas the release rate of chromium was similar. Iron was preferentially released compared with nickel and chromium. Immersion in ALF resulted in the gradual enrichment of chromium in the surface film, a small increase of nickel, and the reduction of oxidized iron with decreasing release rates of alloy constituents as a result. As expected, released metals from stainless steel grade 316L were neither in proportion to the bulk alloy composition nor to the surface film composition.