Hydrogen evolution on nano-particulate transition metal sulfides

Doping-Induced Enhancement of Hydrogen Evolution at MoS2 Electrodes

Rate theory and DFT calculations of hydrogen evolution reaction (HER) on MoS2 with Co, Ni and Pt impurities show the significance of dihydrogen (H2*) complex where both hydrogen atoms are interacting with the surface. Stabilization of such a complex affects the competing Volmer-Heyrovsky (direct H2 release) and Volmer-Tafel (H2* intermediate) pathways. The resulting evolution proceeds with a very small overpotential for all dopants ( η ${\eta }$ =0.1 to 0.2 V) at 25 % edge substitution, significantly reduced from the already low η ${\eta }$ =0.27 V for the undoped edge. At full edge substitution, Co-MoS2 remains highly active ( η ${\eta }$ =0.18 V) while Ni- and Pt-MoS2 are deactivated ( η ${\eta }$ =0.4 to 0.5 V) due to unfavorable interaction with H2*. Instead of the single S-vacancy, the site of intrinsic activity in the basal plane was found to be the undercoordinated central Mo-atom in threefold S-vacancy configurations, enabling hydrogen evolution with η ${\eta }$ =0.52 V via a H2* intermediate. The impurity atoms interact favorably with the intrinsic sulfur vacancies on the basal plane, stabilizing but simultaneously deactivating the triple vacancy configuration. The calculated shifts in overpotential are consistent with reported measurements, and the dependence on doping level may explain variations in experimental observations.

Engineered Two-Dimensional Transition Metal Dichalcogenides for Energy Conversion and Storage

Designing efficient and cost-effective materials is pivotal to solving the key scientific and technological challenges at the interface of energy, environment, and sustainability for achieving NetZero. Two-dimensional transition metal dichalcogenides (2D TMDs) represent a unique class of materials that have catered to a myriad of energy conversion and storage (ECS) applications. Their uniqueness arises from their ultra-thin nature, high fractions of atoms residing on surfaces, rich chemical compositions featuring diverse metals and chalcogens, and remarkable tunability across multiple length scales. Specifically, the rich electronic/electrical, optical, and thermal properties of 2D TMDs have been widely exploited for electrochemical energy conversion (e.g., electrocatalytic water splitting), and storage (e.g., anodes in alkali ion batteries and supercapacitors), photocatalysis, photovoltaic devices, and thermoelectric applications. Furthermore, their properties and performances can be greatly boosted by judicious structural and chemical tuning through phase, size, composition, defect, dopant, topological, and heterostructure engineering. The challenge, however, is to design and control such engineering levers, optimally and specifically, to maximize performance outcomes for targeted applications. In this review we discuss, highlight, and provide insights on the significant advancements and ongoing research directions in the design and engineering approaches of 2D TMDs for improving their performance and potential in ECS applications.

Advances in Understanding Tungsten Disulfide Dynamics during the Hydrogen-Evolution Reaction: An Initial Step in Elucidating the Mechanism

Tungsten disulfide (WS2), a promising electrocatalyst made from readily available materials, demonstrates significant effectiveness in the hydrogen-evolution reaction (HER). The study conducts a thorough investigation using various analytical methods such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), electron paramagnetic resonance (EPR), and in situ Raman spectroscopy. These techniques have uncovered changes in the WS2 particle structure during HER. Through employing EPR, XAS, and in situ Raman spectroscopy, the research reveals structural and chemical transformations. This includes the formation of novel W species and signs of W-O bond formation. Moreover, significant changes in the morphology of the particles were observed. These findings offer enhanced insights into the mechanisms of WS2 under HER conditions, highlighting its catalytic performance and durability.

Sustainable Photocatalytic Acylation of Transition Metal Dichalcogenides with Atom Economy

Transition metal dichalcogenides (TMDs) are promising 2D nanomaterials for diverse applications, but their intrinsic chemical inertness hinders their modification. Herein, a novel approach is presented for the photocatalytic acylation of 2H-MoS2 and 2H-MoSe2, utilizing tetrabutyl ammonium decatungstate ((nBu4N)4W10O32) polyoxometalate complex as a catalyst and a conventional halogen lamp as a source of irradiation. By harnessing the semiconducting properties of TMDs, new avenues emerge for the functionalization of these materials. This novel photocatalytic protocol constitutes the first report on the chemical modification of 2D nanomaterials based on a catalytic protocol and applies to both aliphatic and aromatic substrates. The scope of the decatungstate-photocatalyzed acylation reaction of TMDs is explored by employing an alkyl and an aromatic aldehyde and the success of the methodology is confirmed by diverse spectroscopic, thermal, microscopy imaging, and redox techniques. This catalytic approach on modifying 2D nanomaterials introduces the principles of atom economy in a functionalization protocol for TMDs. It marks a transformative shift toward more sustainable and efficient methodologies in the realm of TMD modification and nanomaterial chemistry.

Allotrope-dependent activity-stability relationships of molybdenum sulfide hydrogen evolution electrocatalysts

Molybdenum disulfide (MoS2) is widely regarded as a competitive hydrogen evolution reaction (HER) catalyst to replace platinum in proton exchange membrane water electrolysers (PEMWEs). Despite the extensive knowledge of its HER activity, stability insights under HER operation are scarce. This is paramount to ensure long-term operation of Pt-free PEMWEs, and gain full understanding on the electrocatalytically-induced processes responsible for HER active site generation. The latter are highly dependent on the MoS2 allotropic phase, and still under debate. We rigorously assess these by simultaneously monitoring Mo and S dissolution products using a dedicated scanning flow cell coupled with downstream analytics (ICP-MS), besides an electrochemical mass spectrometry setup for volatile species analysis. We observe that MoS2 stability is allotrope-dependent: lamellar-like MoS2 is highly unstable under open circuit conditions, whereas cluster-like amorphous MoS3-x instability is induced by a severe S loss during the HER and undercoordinated Mo site generation. Guidelines to operate non-noble PEMWEs are therefore provided based on the stability number metrics, and an HER mechanism which accounts for Mo and S dissolution pathways is proposed.

2D MXenes Nanosheets for Advanced Energy Conversion and Storage Devices: Recent Advances and Future Prospects

Since the initial MXenes were discovered in 2011, several MXene compositions constructed using combinations of various transition metals have been developed. MXenes are ideal candidates for different applications in energy conversion and storage, because of their unique and interesting characteristics, which included good electrical conductivity, hydrophilicity, and simplicity of large-scale synthesis. Herein, we study the current developments in two-dimensional (2D) MXene nanosheets for energy storage and conversion technologies. First, we discuss the introduction to energy storage and conversion devices. Later, we emphasized on 2D MXenes and some specific properties of MXenes. Subsequently, research advances in MXene-based electrode materials for energy storage such as supercapacitors and rechargeable batteries is summarized. We provide the relevant energy storage processes, common challenges, and potential approaches to an acceptable solution for 2D MXene-based energy storage. In addition, recent advances for MXenes used in energy conversion devices like solar cells, fuel cells and catalysis is also summarized. Finally, the future prospective of growing MXene-based energy conversion and storage are highlighted.

Sulfur-deficient edges as active sites for hydrogen evolution on MoS2

A grand-canonical approach is employed to calculate the voltage-dependent activation energy and estimate the kinetics of the hydrogen evolution reaction (HER) on intrinsic sites of MoS2, including edges of varying S-coverage as well as S-vacancies on the basal plane. Certain edge configurations are found to be vastly more active than others, namely S-deficient edges on the Mo-termination where, in the fully S-depleted case, HER can proceed with activation energy below 0.5 eV at an electrode potential of 0 V vs. SHE. There is a clear distinction between the performance of Mo-rich and S-rich adsorption sites, as HER at the latter sites is characterized by large (generally above 1.5 eV) Heyrovsky and Tafel energy barriers despite near-thermoneutral hydrogen adsorption energy. Thus, exposing Mo-atoms on the edges to which hydrogen can directly bind is crucial for efficient hydrogen evolution. While S-vacancies on the basal plane do expose Mo-rich sites, the energy barriers are still significant due to high coordination of the Mo atoms. Kinetic modelling based on the voltage-dependent reaction energetics gives a theoretical overpotential of 0.25 V and 1.09 V for the Mo-edge with no S atoms and the weakly sulfur-deficient (2% S-vacancies) basal plane, respectively, with Volmer-Heyrovsky being the dominant pathway. These values coincide well with reported experimentally measured values of the overpotential for the edges and basal plane. For the partly Mo-exposed edges, the calculated overpotential is 0.6-0.7 V while edges with only S-sites give overpotential exceeding that of the basal plane. These results show that the overpotential systematically decreases with increased sulfur-deficiency and reduced Mo-coordination. The fundamental difference between Mo- and S-rich sites suggests that catalyst design of transition metal dichalcogenides should be focused on facilitating and modifying the metal sites, rather than activating the chalcogen sites.

MoS2-Based Nanocomposites for Photocatalytic Hydrogen Evolution and Carbon Dioxide Reduction

Photocatalysis is a facile and sustainable approach for energy conversion and environmental remediation by generating solar fuels from water splitting. Due to their two-dimensional (2D) layered structure and excellent physicochemical properties, molybdenum disulfide (MoS₂) has been effectively utilized in photocatalytic H₂ evolution reaction (HER) and CO₂ reduction. The photocatalytic efficiency of MoS₂ greatly depends on the active edge sites present in their layered structure. Modifications like reducing the layer numbers, creating defective structures, and adopting different morphologies produce more unsaturated S atoms as active edge sites. Hence, MoS₂ acts as a cocatalyst in nanocomposites/heterojunctions to facilitate the photogenerated electron transfer. This review highlights the role of MoS₂ as a cocatalyst for nanocomposites in H₂ evolution reaction and CO₂ reduction. The H₂ evolution activity has been described comprehensively as binary (with metal oxide, carbonaceous materials, metal sulfides, and metal-organic frameworks) and ternary composites of MoS₂. Photocatalytic CO₂ reduction is a more complex and challenging process that demands an efficient light-responsive semiconductor catalyst to tackle the thermodynamic and kinetic factors. Photocatalytic reduction of CO₂ using MoS₂ is an emerging topic and would be a cost-effective substitute for noble catalysts. Herein, we also exclusively envisioned the possibility of layered MoS₂ and its composites in this area. This review is expected to furnish an understanding of the diverse roles of MoS₂ in solar fuel generation, thus endorsing an interest in utilizing this unique layered structure to create nanostructures for future energy applications.

2D FeSx Nanosheets by Atomic Layer Deposition: Electrocatalytic Properties for the Hydrogen Evolution Reaction

2-dimensional FeS_x nanosheets of different sizes are synthesized by applying different numbers of atomic layer deposition (ALD) cycles on TiO₂ nanotube layers and graphite sheets as supporting materials and used as an electrocatalyst for the hydrogen evolution reaction (HER). The electrochemical results confirm electrocatalytic activity in alkaline media with outstanding long-term stability (>65 h) and enhanced catalytic activity, reflected by a notable drop in the initial HER overpotential value (up to 26 %). By using a range of characterization techniques, the origin of the enhanced catalytic activity was found to be caused by the synergistic interplay between in situ morphological and compositional changes in the 2D FeS_x nanosheets during HER. Under the application of a cathodic potential in alkaline media, the as-synthesized 2D FeS_x nanosheets transformed into iron oxyhydroxide-iron oxysulfide core-shell nanoparticles, which exhibited a higher active catalytic surface and newly created Fe-based HER catalytic sites.

Exploring the Sub-nanoscale Structure of Cobalt Molybdenum Sulfide and the Role of a Cobalt Promoter in Catalytic Hydrogen Evolution

Cobalt-promoted molybdenum sulfide (CoMoS) is known as a promising catalyst for H₂ evolution reaction and hydrogen desulfurization reaction. This material exhibits superior catalytic activity as compared to its pristine molybdenum sulfide counterpart. However, revealing the actual structure of cobalt-promoted molybdenum sulfide as well as the plausible contribution of a cobalt promoter is still challenging, especially when the material has an amorphous nature. Herein, we report, for the first time, on the use of positron annihilation spectroscopy (PAS), being a nondestructive nuclear radiation-based method, to visualize the position of a Co promoter within the structure of MoS at the atomic scale, which is inaccessible by conventional characterization tools. It is found that at low concentrations, a Co atom occupies preferably the Mo-vacancies, thus generating the ternary phase CoMoS whose structure is composed of a Co-S-Mo building block. Increasing the Co concentration, e.g., a Co/Mo molar ratio of higher than 1.12/1, leads to the occupation of both Mo-vacancies and S-vacancies by Co. In this case, secondary phases such as MoS and CoS are also produced together with the CoMoS one. Combining the PAS and electrochemical analyses, we highlight the important contribution of a Co promoter to enhancing the catalytic H₂ evolution activity. Having more Co promoter in the Mo-vacancies promotes the H₂ evolution rate, whereas having Co in the S-vacancies causes a drop in H₂ evolution ability. Furthermore, the occupation of Co to the S-vacancies leads also to the destabilization of the CoMoS catalyst, resulting in a rapid degradation of catalytic activity.

Carbon Dioxide Reduction on Transition Metal Dichalcogenides with Ni and Cu Edge Doping: A Density-Functional Theory Study

Transition-metal dichalcogenides (TMDs) have promising properties for their use as catalysts of CO₂ reduction to methane via the Sabatier reaction. In this article we use density-functional theory calculations to gain insight into the energetics of this reaction for Mo/W-based and S/Se-based TMDs with non-, Ni- and Cu-doping. We show that sulfur-based TMDs with Ni/Cu doping exhibit better indicators for catalytic performance of the CO₂ reduction reaction than non-doped and doped TMDs without active sites. In addition, the role of the transition metal was found to a much smaller influence in the reaction than the role of the chalcogen and dopant atoms, which influence the bonding strength and type, respectively.

Interfacial Strain-Modulated Nanospherical Ni2 P by Heteronuclei-Mediated Growth on Ti3 C2 Tx MXene for Efficient Hydrogen Evolution

Interface modulation of nickel phosphide (Ni₂ P) to produce an optimal catalytic activation barrier has been considered a promising approach to enhance the hydrogen production activity via water splitting. Herein, heteronuclei-mediated in situ growth of hollow Ni₂ P nanospheres on a surface defect-engineered titanium carbide (Ti₃ C₂ T_x ) MXene showing high electrochemical activity for the hydrogen evolution reaction (HER) is demonstrated. The heteronucleation drives intrinsic strain in hexagonal Ni₂ P with an observable distortion at the Ni₂ P@Ti₃ C₂ T_x MXene heterointerface, which leads to charge redistribution and improved charge transfer at the interface between the two components. The strain at the Ni₂ P@Ti₃ C₂ T_x MXene heterointerface significantly boosts the electrochemical catalytic activities and stability toward HER in an acidic medium via a combination between experimental results and theoretical calculations. In a 0.5 m H₂ SO₄ electrolyte, the Ni₂ P@Ti₃ C₂ T_x MXene hybrid shows excellent HER catalytic performance, requiring an overpotential of 123.6 mV to achieve 10 mA cm^-2 with a Tafel slope of 39 mV dec^-1 and impressive durability over 24 h operation. This approach presents a significant potential to rationally design advanced catalysts coupled with 2D materials and transition metal-based compounds for state-of-the-art high efficiency energy conversions.

Impact Electrochemistry of MoS2: Electrocatalysis and Hydrogen Generation at Low Overpotentials

MoS₂ materials have been extensively studied as hydrogen evolution reaction (HER) catalysts. In this study nanoparticulate MoS₂ is explored as a HER catalyst through impact voltammetry. The onset potential was found to be -0.10 V (vs RHE) at pH 2, which was confirmed to be due to HER by scale-up of the impact experiment to generate and collect a sufficient volume of the gas to enable its identification as hydrogen via gas chromatography. This is in contrast to electrodeposited MoS₂, which was found to be stable in pH 2 sulfuric acid solution with an onset potential of -0.29 V (vs RHE), in good agreement with literature. XPS was used to categorize the materials and confirm the chemical composition of both nanoparticles and electrodeposits, with XRD used to analyze the crystal structure of the nanoparticles. The early onset of HER was postulated from kinetic analysis to be due to the presence of nanoplatelets of about 1-3 trilayers participating in the impact reactions, and AFM imaging confirmed the presence of these platelets.

Metal-Support Interactions in Molecular Single-Site Cluster Catalysts

This study provides atomistic insights into the interface between a single-site catalyst and a transition metal chalcogenide support and reveals that peak catalytic activity occurs when edge/support redox cooperativity is maximized. A molecular platform MCo₆Se₈(PEt₃)₄(L)₂ (1-M, M = Cr, Mn, Fe, Co, Cu, and Zn) was designed in which the active site (M)/support (Co₆Se₈) interactions are interrogated by systematically probing the electronic and structural changes that occur as the identity of the metal varies. All 3d transition metal 1-M clusters display remarkable catalytic activity for coupling tosyl azide and tert-butyl isocyanide, with Mn and Co derivatives showing the fastest turnover in the series. Structural, electronic, and magnetic characterization of the clusters was performed using single crystal X-ray diffraction, ¹H and ³¹P nuclear magnetic resonance spectroscopy, electronic absorption spectroscopy, cyclic voltammetry, and computational methods. Distinct metal/support redox regimes can be accessed in 1-M based on the energy of the edge metal's frontier orbitals with respect to those of the cluster support. As the degree of electronic interaction between the edge and the support increases, a cooperative regime is reached wherein the support can deliver electrons to the catalytic site, increasing the reactivity of key metal-nitrenoid intermediates.

A Review on MXene Synthesis, Stability, and Photocatalytic Applications

Photocatalytic water splitting, CO₂ reduction, and pollutant degradation have emerged as promising strategies to remedy the existing environmental and energy crises. However, grafting of expensive and less abundant noble-metal cocatalysts on photocatalyst materials is a mandatory practice to achieve enhanced photocatalytic performance owing to the ability of the cocatalysts to extract electrons efficiently from the photocatalyst and enable rapid/enhanced catalytic reaction. Hence, developing highly efficient, inexpensive, and noble-metal-free cocatalysts composed of earth-abundant elements is considered as a noteworthy step toward considering photocatalysis as a more economical strategy. Recently, MXenes (two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides) have shown huge potential as alternatives for noble-metal cocatalysts. MXenes have several excellent properties, including atomically thin 2D morphology, metallic electrical conductivity, hydrophilic surface, and high specific surface area. In addition, they exhibit Gibbs free energy of intermediate H atom adsorption as close to zero and less than that of a commercial Pt-based cocatalyst, a Fermi level position above the H₂ generation potential, and an excellent ability to capture and activate CO₂ molecules. Therefore, there is a growing interest in MXene-based photocatalyst materials for various photocatalytic events. In this review, we focus on the recent advances in the synthesis of MXenes with 2D and 0D morphologies, the stability of MXenes, and MXene-based photocatalysts for H₂ evolution, CO₂ reduction, and pollutant degradation. The existing challenges and the possible future directions to enhance the photocatalytic performance of MXene-based photocatalysts are also discussed.

Electronic Properties and Electrocatalytic Water Splitting Activity for Precious-Metal-Adsorbed Silicene with Nonmetal Doping

Since nonmetal (NM)-doped two-dimensional (2D) materials can effectively modulate their physical properties and chemical activities, they have received a lot of attention from researchers. Therefore, the stability, electronic properties, and electrocatalytic water splitting activity of precious-metal (PM)-adsorbed silicene doped with two NM atoms are investigated based on density functional theory (DFT) in this paper. The results show that NM doping can effectively improve the stability of PM-adsorbed silicene and exhibit rich electronic properties. Meanwhile, by comparing the free energies of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) intermediates of 15 more stable NM-doped systems, it can be concluded that the electrocatalytic water splitting activity of the NM-doped systems is more influenced by the temperature. Moreover, the Si-S2-Ir-doped system exhibits good HER performance when the temperature is 300 K, while the Si-N2-Pt-doped system shows excellent OER activity. Our theoretical study shows that NM doping can effectively promote the stability and electrocatalytic water splitting of PM-adsorbed silicene, which can help in the application of silicene in electrocatalytic water splitting.

Revealing the Heterogeneity of Large-Area MoS2 Layers in the Electrocatalytic Hydrogen Evolution Reaction

The electrocatalytic activity concerning the hydrogen evolution reaction (HER) of micrometer-sized MoS2 layers transferred on a glassy carbon surface was evaluated by scanning electrochemical cell microscopy (SECCM) in a high-throughput approach. Multiple areas on single or multiple MoS2 layers were assessed using a hopping mode nanocapillary positioning with a hopping distance of 500 nm and a nanopipette size of around 55 nm. The locally recorded linear sweep voltammograms revealed a high lateral heterogeneity over the MoS2 sheet regarding their HER activity, with currents between -40 and -60 pA recorded at -0.89 V vs. reversible hygrogen electrode over about 4400 different measured areas on the MoS2 sheet. Stacked MoS2 layers did not show different electrocatalytic activity than the single MoS2 sheet, suggesting that the interlayer resistance influences the electrocatalytic activity less than the resistances induced by possible polymer residues or water layers formed between the transferred MoS2 sheet and the glassy carbon electrode.

Boosting Hydrogen Evolution Reaction Activity of Amorphous Molybdenum Sulfide Under High Currents Via Preferential Electron Filling Induced by Tungsten Doping

The lack of highly efficient, durable, and cost-effective electrocatalysts for the hydrogen evolution reaction (HER) working at high current densities poses a significant challenge for the large-scale implementation of hydrogen production from renewable energy. Herein, amorphous molybdenum tungsten sulfide/nitrogen-doped reduced graphene oxide nanocomposites (a-MoWS_x /N-RGO) are synthesized by plasma treatment for use as high-performance HER catalysts. By adjusting the plasma treatment duration and chemical composition, an optimal a-MoWS_x /N-RGO catalyst is obtained, which exhibits a low overpotential of 348 mV at a current density of 1000 mA cm^-2 and almost no decay after 24 h of working at this current density, outperforming commercial platinum/carbon (Pt/C) and previously reported heteroatom-doped MoS₂ -based catalysts. Based on density functional theory (DFT) calculations, it is found that with a reasonable tungsten doping level, the catalytic active site (2S^{2 -} ) shows excellent catalytic performance working at high current densities because extra electrons preferentially fill at 2S^{2 -} . The introduction of tungsten tends to lower the electronic structure energy, resulting in a closer-to-zero positive Δ G H ∗ $\Delta {G}_{{{\rm{H}}}^{\rm{*}}}$ . Excessive tungsten introduction, however, can lead to structural damage and a worse HER performance under high current densities. The work provides a route towards rationally designing high-performance catalysts for the HER at industrial-level currents using earth-abundant elements.

Tungsten-Based Nanocatalysts: Research Progress and Future Prospects

The high price of noble metal resources limits its commercial application and stimulates the potential for developing new catalysts that can replace noble metal catalysts. Tungsten-based catalysts have become the most important substitutes for noble metal catalysts because of their rich resources, friendly environment, rich valence and better adsorption enthalpy. However, some challenges still hinder the development of tungsten-based catalysts, such as limited catalytic activity, instability, difficult recovery, and so on. At present, the focus of tungsten-based catalyst research is to develop a satisfactory material with high catalytic performance, excellent stability and green environmental protection, mainly including tungsten atomic catalysts, tungsten metal nanocatalysts, tungsten-based compound nanocatalysts, and so on. In this work, we first present the research status of these tungsten-based catalysts with different sizes, existing forms, and chemical compositions, and further provide a basis for future perspectives on tungsten-based catalysts.

Synthesis of Self-Supported Cu/Cu3P Nanoarrays as an Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Owing to the energy crisis and environmental pollution, it is essential to develop cheap, environmentally friendly and sustainable energy to replace noble metal electrocatalysts for use in the hydrogen evolution reaction (HER). We report herein that a Cu/Cu3P nanoarray catalyst was directly grown on the surfaces of Cu nanosheets from its Cu/CuO nanoarray precursor by a low-temperature phosphidation process. In particular, the effects of phosphating distance, mass ratio and temperature on the morphology of Cu/Cu3P nanoarrays were studied in detail. This nanoarray, as an electrocatalyst, displays excellent catalytic performance and long-term stability in an acid solution for electrochemical hydrogen generation. Specifically, the Cu/Cu3P nanoarray-270 exhibits a low onset overpotential (96 mV) and a small Tafel slope (131 mV dec−1).

Detection of Trace Water Based on Electro-oxidation of Molybdenum Disulfide Nanomaterials to Form Molybdenum Oxysulfide

Molybdenum disulfide nanomaterials nowadays are very popular in electrocatalysis field due to their outstanding catalytic performance toward many electrochemical reactions. However, the electrochemical oxidation reaction of molybdenum disulfide nanomaterials in the range of positive potential has not been studied thoroughly. Herein, we have investigated electro-oxidation of molybdenum disulfide nanomaterials and put forward a new reaction mechanism: molybdenum disulfide nanomaterials are electro-oxidized with water to form molybdenum oxysulfide (MoOS2) and hydrogen ions, leading to the release of hydrogen on the counter electrode. Various characterization methods such as contact angle measurement, scanning electron microscope (SEM), transmission electron microscope (TEM) with energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS), and gas chromatography (GC) were applied to attest the doping of oxygen and the generation of hydrogen. Based on this reaction, we constructed a novel ultrasensitive electrochemical sensor for detecting trace water with the minimum detectable content of 0.0010% (v/v) in various organic solvents and ionic liquids, which is comparable to the Karl Fischer titration, but with much simpler reagent.

Transition Metal Atoms Anchored on CuPS3 Monolayer for Enhancing Catalytic Performance of Hydrogen Evolution Reactions

The noble metal such as Pt has been used as the catalysts for hydrogen evolution reaction (HER), but with problems such as scarcity of resources and high cost. Anchoring transition metal atoms onto the catalysts is regarded as a potential approach to solve this problem and enhance the electrocatalytic performance of HER. For this purpose, two-dimensional materials, such as CuPS3 monolayer, are regarded as one of the most ideal carriers for adsorption of metal atoms. However, there is no previous study on this topic. In this paper, we systematically studied microstructures, electronic properties, and electrocatalytic performance of the CuPS3 monolayer anchored with transition metal atoms (e.g., Sc, Ti, V, Cr, Mn, Fe, Co, and Ni) using a density functional theory (DFT). Results showed that all the transition metal atoms are favorably adsorbed onto the CuPS3 monolayer with large binding energies at the top of the Cu atom. The pristine CuPS3 monolayer has a large catalytic inertia for hydrogen evolution reactions, whereas after anchored with transition metal atoms, their catalytic performances have been significantly improved. The Gibbs free energy (ΔGH) is 0.44 eV for the H atom absorbed onto the pristine CuPS3 monolayer, whereas the ΔGH values for the V, Fe, and Ni atoms anchored onto the CuPS3 monolayer are 0.02, 0.11, and 0.09 eV, respectively, which is close to the ΔGH of H atom adsorbed on Pt (e.g., −0.09 eV). At the same time, the influence of hydrogen coverage rate was calculated. The result shows that V adsorbed on CuPS3 monolayer is catalytic active for HER for a large range of hydrogen coverage. Our results demonstrate that anchoring of V atom onto the CuPS3 monolayer is a potentially superior method for making the catalyst for the HER.

Graphical abstract

Improving the intrinsic activity of electrocatalysts for sustainable energy conversion: where are we and where can we go?

As we are in the midst of a climate crisis, there is an urgent need to transition to the sustainable production of fuels and chemicals. A promising strategy towards this transition is to use renewable energy for the electrochemical conversion of abundant molecules present in the earth's atmosphere such as H₂O, O₂, N₂ and CO₂, to synthetic fuels and chemicals. A cornerstone to this strategy is the development of earth abundant electrocatalysts with high intrinsic activity towards the desired products. In this perspective, we discuss the importance and challenges involved in the estimation of intrinsic activity both from the experimental and theoretical front. Through a thorough analysis of published data, we find that only modest improvements in intrinsic activity of electrocatalysts have been achieved in the past two decades which necessitates the need for a paradigm shift in electrocatalyst design. To this end, we highlight opportunities offered by tuning three components of the electrochemical environment: cations, buffering anions and the electrolyte pH. These components can significantly alter catalytic activity as demonstrated using several examples, and bring us a step closer towards complete system level optimization of electrochemical routes to sustainable energy conversion.

Smart Designs of Mo Based Electrocatalysts for Hydrogen Evolution Reaction

As a sustainable and clean energy source, hydrogen can be generated by electrolytic water splitting (i.e., a hydrogen evolution reaction, HER). Compared with conventional noble metal catalysts (e.g., Pt), Mo based materials have been deemed as a promising alternative, with a relatively low cost and comparable catalytic performances. In this review, we demonstrate a comprehensive summary of various Mo based materials, such as MoO2, MoS2 and Mo2C. Moreover, state of the art designs of the catalyst structures are presented, to improve the activity and stability for hydrogen evolution, including Mo based carbon composites, heteroatom doping and heterostructure construction. The structure–performance relationships relating to the number of active sites, electron/ion conductivity, H/H2O binding and activation energy, as well as hydrophilicity, are discussed in depth. Finally, conclusive remarks and future works are proposed.

Creating Fluorine-Doped MoS2 Edge Electrodes with Enhanced Hydrogen Evolution Activity

The edge sites of MoS₂ are catalytically active for hydrogen evolution reactions (HER). However, pristine edge sites usually contain only intrinsic atoms or defects, limiting the tuning of on-site hydrogen species adsorption and desorption, the critical steps for HER. In addition, the number of atoms on pristine edges is small compared to that of electrochemically inert atoms in bulk. Thus, it is desirable to develop a scalable technique of creating a large number of highly HER-active edge sites. Here, a plasma etching strategy is developed for creating MoS₂ edge electrodes with a controllable number of active sites that enable the quantitative characterization of their HER activity using a local probe method. Fluorine atoms with large electronegativity are doped on the MoS₂ edge sites that lead to a fivefold activity enhancement compared to that from pristine edges and is attributed to the more moderate binding energy for hydrogen species. The scalability of such a method is further demonstrated by activating MoS₂ catalyst in macroscopic quantities with enhanced HER performance and stability. The work provides two-dimensional materials as a platform for understanding the doping effect on the edge sites at atomic-level, and offers a novel route for the design of efficient catalysts.

Size-dependent trends in the hydrogen evolution activity and electronic structure of MoS2 nanotubes

The thermodynamics of hydrogen evolution on MoS2 nanotubes is studied for the first time using periodic density functional theory calculations to obtain hydrogen adsorption free energies (ΔG Hads ) on pristine nanotubes and those with S-vacancy defects. Armchair and zigzag MoS2 nanotubes of different diameters, ranging from 12 to 22 Å, are examined. The H adsorption energy is observed to become more favourable (lower ΔG Hads ) as nanotube diameter decreases, with ΔG Hads values ranging from 1.82 to 1.39 eV on the pristine nanotubes, and from 0.03 to -0.30 eV at the nanotube S-vacancy defect sites. An ideal thermoneutral ΔG Hads value of nearly 0 eV is observed at the S-vacancy site on nanotubes around 20 to 22 Å in diameter. For the pristine nanotubes, density of states calculations reveal that electron transfer from S to Mo occurs during H adsorption, and the energy gap between these two states yields a highly reliable linear correlation with ΔG Hads , where a smaller gap leads to a more favourable hydrogen adsorption. For the S-vacancy defect site the H adsorption resembles that on a pure metallic surface, meaning that a traditional d-band centre model can be applied to explain the trends in ΔG Hads . A linear relation between the position of the Mo d-states and ΔG Hads is found, with d-states closer to the Fermi level leading to strong hydrogen adsorption. Overall this work highlights the relevance of MoS2 nanotubes as promising hydrogen evolution catalysts and explains trends in their activity using the energies of the electronic states involved in binding hydrogen.

Double Transition Metal Carbides MXenes (D-MXenes) as Promising Electrocatalysts for Hydrogen Reduction Reaction: Ab Initio Calculations

Double-transition-metal MXenes (D-MXenes) have been widely pursued in the advancement of the renewable energy storage technology in recent years. In this work, the hydrogen evolution reaction (HER) catalytic mechanism of several oxygen-terminated D-MXenes with the chemical formula of M'2M″C2O2 (M' = Mo, Cr; M″ = Ti, V, Nb, Ta) is theoretically studied. For comparison, the corresponding monometallic MXenes (M-MXenes, M'3C2O2) are fairly compared by means of the density functional theory calculations. Based on our theoretical results, the HER performance of M-MXenes can be improved by constructing a "sandwich-like" ordered D-MXene configuration. Moreover, the HER performance of Mo-based D-MXenes (Mo2M″C2O2) is superior to that of Cr-based D-MXenes (Cr2M″C2O2), which highlights that the HER activity of Mo2VC2O2 and Mo2NbC2O2 is better than that of Pt(111). This work not only unravels the HER mechanism of D-MXenes (M'2M″C2O2) but also paves the way in designing emergent MXene-based HER electrocatalysts with high efficiency.

Highly Dispersed Ru Nanoparticles on Boron-Doped Ti3 C2 Tx (MXene) Nanosheets for Synergistic Enhancement of Electrocatalytic Hydrogen Evolution

2D-layered materials have attracted increasing attention as low-cost supports for developing active catalysts for the hydrogen evolution reaction (HER). In addition, atomically thin Ti₃ C₂ T_x (MXene) nanosheets have surface termination groups (T_x : F, O, and OH), which are active sites for effective functionalization. In this work, heteroatom (boron)-doped Ti₃ C₂ T_x (MXene) nanosheets are developed as an efficient solid support to host ultrasmall ruthenium (Ru) nanoparticles for electrocatalytic HER. The quantum-mechanical first-principles calculations and electrochemical tests reveal that the B-doping onto 2D MXene nanosheets can largely improve the intermediate H* adsorption kinetics and reduce the charge-transfer resistance toward the HER, leading to increased reactivity of active sites and favorable electrode kinetics. Importantly, the newly designed electrocatalyst based on Ru nanoparticles supported on B-doped MXene (Ru@B-Ti₃ C₂ T_x ) nanosheets shows a remarkable catalytic activity with low overpotentials of 62.9 and 276.9 mV to drive 10 and 100 mA cm^-2 , respectively, for the HER, while exhibiting excellent cycling stabilities. Moreover, according to the theoretical calculations, Ru@B-Ti₃ C₂ T_x exhibits a near-zero value of Gibbs free energy (ΔG_H*  = 0.002 eV) for the HER. This work introduces a facile strategy to functionalize MXene for use as a solid support for efficient electrocatalysts.

Corrosion Behavior of CW6MC Nickel Cast Alloy (Inconel 625) Welded by Shielded Metal Arc Welding

The aim of this study concerns the effect of multi-pass shielded metal arc welding (SMAW) on the corrosion behavior of CW6MC cast nickel alloy. Using optical and SEM techniques the welded joint is analyzed. Vickers microhardness mapping and potentiodynamic polarization in NaCl and H2SO4 solutions are also evaluated. Both the Laves phase and NbC-type carbides are identified in the base metal (BM) and weld metal (WM) regions. The main microstructural difference observed between these regions is the morphology aspect and fineness of the dendritic arrays. The welding process promotes the finer columnar grains formation with refined intermetallic particles in the WM than equiaxed grains of the BM, which in turn results in higher microhardness values in the former region. However, no substantial changes were observed in the corrosion behavior between the BM and WM regions, considering both acid and saline media. Nevertheless, during the multi-pass SMAW process, some non-metallic micrometric inclusions (Mo and S-rich regions) can be constituted to occur in the WM region. This is associated with a significant drop in the corrosion performance of this region when the electrochemical tests are evaluated.

The Synergetic Effect of MoSO2/Graphite Nanosheets as Highly Efficient for Electrochemical Water Splitting in Acidic Media

Metal oxide nanoarchitectures have a wide range of qualities that can be used to produce novel technologies in the field of renewable energy, such as energy conversion solar fuels and storage via the photovoltaic effect, and electrochemical water splitting. The approach for the synthesis of earth abundant metal oxide nanostructures is facile and cost effective and involves scalable methodologies for the development of functional devices. The composite material exhibits enhanced active edge sites for the potential HER. The electrochemical experiments revealed satisfactory results of electrocatalytic gas production HER. The composite sample produces a current density at 10 mAcm−2 an over potential of 345 mV and Tafel value of 60 mVdec−1 it exhibits at which predominantly ensures the swift charge transfer kinetics during HER. The sample 3 remains durable and stable for 30 hours. EIS shown value of 21.88 Ohms as charge transfer resistance which further strengthened HER and Tafel results. The sample 3 exhibits a 4.69 µFcm−2 capacitance double layer and surface area of 177.25 cm2 it further supports the unique productivity for HER activity. The small Tafel slope which relatively close to Pt shows a clear and high potential of as prepared MoS2/Graphite nanosheets composite material for the replacement of noble metals in the field of renewable energy. The tiny Tafel slope value suggests that the efficient hydrogen evolution reaction has a lot of promise. This developed method provides the alternative method for the development of other materials for the energy harvesting applications.

Differences and Similarities of Photocatalysis and Electrocatalysis in Two-Dimensional Nanomaterials: Strategies, Traps, Applications and Challenges

Photocatalysis and electrocatalysis have been essential parts of electrochemical processes for over half a century. Recent progress in the controllable synthesis of 2D nanomaterials has exhibited enhanced catalytic performance compared to bulk materials. This has led to significant interest in the exploitation of 2D nanomaterials for catalysis. There have been a variety of excellent reviews on 2D nanomaterials for catalysis, but related issues of differences and similarities between photocatalysis and electrocatalysis in 2D nanomaterials are still vacant. Here, we provide a comprehensive overview on the differences and similarities of photocatalysis and electrocatalysis in the latest 2D nanomaterials. Strategies and traps for performance enhancement of 2D nanocatalysts are highlighted, which point out the differences and similarities of series issues for photocatalysis and electrocatalysis. In addition, 2D nanocatalysts and their catalytic applications are discussed. Finally, opportunities, challenges and development directions for 2D nanocatalysts are described. The intention of this review is to inspire and direct interest in this research realm for the creation of future 2D nanomaterials for photocatalysis and electrocatalysis.

A ternary hybrid of Zn-doped MoS2-RGO for highly effective electrocatalytic hydrogen evolution

Modification of MoS₂-based catalysts is effective in solving the overdependence of hydrogen evolution reactions (HERs) on noble metal catalysts. In this work, a Zn-doped molybdenum disulfide-reduced graphene oxide (Zn-MoS₂-RGO) hybrid was synthesized in one step employing a hydrothermal method. By substituting the position of Mo, uniform doping with Zn improved the catalytic activity of MoS₂ for HER. The interlayer spacing of MoS₂ increased from 0.65 to 0.75 nm, demonstrating RGO effectively interpolate into MoS₂ nanosheets. This prevented aggregation and exposed more edge active sites of MoS₂. According to density functional theory (DFT) calculations, the layered structure of the MoS₂ nanosheets doped with Zn and intercalated with RGO promoted charge transfer and resulted in outstanding hydrogen evolution activity. Compared with MoS₂ (6.86 eV), the Zn-MoS₂-RGO hybrid (5.47 eV) with a considerably lower energy level value exhibited excellent electrocatalytic performance. Under optimal conditions, at a potential of -0.3 V vs. RHE, the current density reached -169 mA cm^-2 in a 0.5 M H₂SO₄ solution, 4.78 μmol of H₂ was produced in 6 h, and the Faraday efficiency reached 92%. The results obtained herein indicated that Zn-MoS₂-RGO was a promising candidate for application in electrocatalytic HER.

Functionalized tungsten disulfide nanotubes for dopamine and catechol detection in a tyrosinase-based amperometric biosensor design

WS2 nanotubes functionalized with carboxylic acid functions (WS2-COOH) were used for improved immobilization of the enzyme tyrosinase in order to form an electrochemical biosensor towards catechol and dopamine. The nanotubes were deposited on glassy carbon electrodes using a dispersion-filtration-transfer procedure to assure the reproducibility of the deposits. After the electrochemical and morphological characterization of these WS2-COOH nanotube deposits, the formed biosensors showed very satisfying performance towards catechol detection with a linear range of 0.6-70 μmol L-1 and a sensitivity of 10.7 ± 0.2 mA L mol-1. The apparent Michaelis Menten constant of this system is slightly lower than the KM value of tyrosinase in solution, reflecting an excellent accessibility of the active site of the enzyme combined with a good mass transport of the target molecule through the deposit. For dopamine detection, we observed an accumulation of this substrate due to electrostatic interactions between the amine function of dopamine and the carboxylic acid groups of the nanotubes. This led to improved signal capture at low dopamine concentrations. With linear ranges of 0.5-10 μmol L-1 and 10-40 μmol L-1, and respective sensitivities of 6.2 ± 0.7 mA L mol-1 and 3.4 ± 0.4 mA L mol-1, the overall sensor performance is within the average of comparable results using carbon nanotubes. Nonetheless, the simplified handling of these nanotubes and their reduced environmental impact make these WS2-COOH nanotubes a promising nanomaterial for biosensing applications.

Rhenium Doping of Layered Transition-Metal Diselenides Triggers Enhancement of Photoelectrochemical Activity

The ever decreasing sources of fossil fuels have launched extensive research of alternative materials that might play a key role in their replacement. Therefore, the scientific community continuously investigates the possibilities of maximizing the working capacity of such materials in order to fulfill energy challenges in the near future. In this context, doping of the semiconducting materials is a versatile strategy to trigger their physicochemical properties as well their electrochemical performance. Herein, the impact of rhenium doping toward photoelectrochemical activity of MoSe₂ and WSe₂ was studied. Our results indicate that rhenium as a dopant contributes to better overall electrochemical performance, that is, an easier electron transfer of these materials compared to pristine compounds. Additionally, the photoelectrochemical measurements revealed that the doping with rhenium generated an enhancement of the photocurrent response of MoSe₂ as well as WSe₂ under UV light illumination.

Enhancing the hydrogen evolution activity of MoS2 basal planes and edges using tunable carbon-based supports

The hydrogen adsorption free energy (ΔG_Hads) on the basal plane and edges of MoS₂ is studied using periodic density functional theory, with the catalyst supported by a range of two-dimensional carbon-based materials. Understanding how ΔG_Hads can be tuned with support gives insight into MoS₂ as a catalyst for the hydrogen evolution reaction. The supports studied here include graphene oxide materials, heteroatom doped (S, B, and N) graphene, and some insulator materials (hexagonal boron nitride and graphitic carbon nitride). For the basal plane of MoS₂, a wide range of values for ΔG_Hads are observed (between 1.4 and 2.2 eV) depending on the support material used. It is found that ΔG_Hads relates directly to the energy of occupied p-orbital states in the MoS₂ catalyst, which is modified by the support material. On the Mo-edge of MoS₂, different supports induce smaller variations in ΔG_Hads, with values ranging between -0.27 and 0.09 eV. However, a graphene support doped with graphitic N atoms produces a ΔG_Hads value of exactly 0 eV, which is thermodynamically ideal for hydrogen evolution. Furthermore, ΔG_Hads is found to relate closely and linearly to the amount of charge transfer between MoS₂ and support when they adhere together. The support-induced tuning of ΔG_Hads on MoS₂ observed here provides a useful tool for improving current MoS₂ catalysts, and the discovery of variables which mediate changes in ΔG_Hads contributes to the rational design of new hydrogen evolution catalysts.

Engineering MoSe2/WS2 Hybrids to Replace the Scarce Platinum Electrode for Hydrogen Evolution Reactions and Dye-Sensitized Solar Cells

In recent times, two-dimensional transition-metal dichalcogenides (TMDs) have become extremely attractive and proficient electrodes for dye-sensitized solar cells (DSSCs) and water electrolysis hydrogen evolution as alternatives to the scarce metal platinum (Pt). The active TMD molybdenum selenide (MoSe₂) and tungsten disulfide (WS₂) are inspiring systems owing to their abundance of active sulfur and selenium sites, but their outputs are lacking due to their inactive basal planes and ineffective transport behavior. In this work, van der Waals interrelated MoSe₂/WS₂ hybrid structures were constructed on conducting glass substrates by chemicophysical methodologies. For the first time, the constructed MoSe₂/WS₂ structures were effectively used as a counter electrode for DSSCs and an active electrode for hydrogen evolution to replace the nonabundant Pt. The assembled DSSCs using the designed MoSe₂/WS₂ heterostructure counter electrode provided a superior power-conversion efficiency of 9.92% and a photocurrent density of 23.10 mA·cm^-2, unmatchable by most of the TMD-based structures. The MoSe₂/WS₂ heterostructure displayed excellent electrocatalytic hydrogen evolution behavior with a 75 mV overpotential to drive a 10 mA·cm^-2 current density, a 60 mV·dec^-1 Tafel slope, and an over 20 h durable process in an acidic medium. The results demonstrated the advantages of the MoSe₂/WS₂ hybrid development for generating interfacial transport and active facet distribution and enriching the electrocatalytic activity for DSSCs and the water-splitting hydrogen evolution process.

2D Transition Metal Dichalcogenides: Design, Modulation, and Challenges in Electrocatalysis

Hydrogen has been deemed as an ideal substitute fuel to fossil energy because of its renewability and the highest energy density among all chemical fuels. One of the most economical, ecofriendly, and high-performance ways of hydrogen production is electrochemical water splitting. Recently, 2D transition metal dichalcogenides (also known as 2D TMDs) showed their utilization potentiality as cost-effective hydrogen evolution reaction (HER) catalysts in water electrolysis. Herein, recent representative research efforts and systematic progress made in 2D TMDs are reviewed, and future opportunities and challenges are discussed. Furthermore, general methods of synthesizing 2D TMDs materials are introduced in detail and the advantages and disadvantages for some specific methods are provided. This explanation includes several important regulation strategies of creating more active sites, heteroatoms doping, phase engineering, construction of heterostructures, and synergistic modulation which are capable of optimizing the electrical conductivity, exposure to the catalytic active sites, and reaction energy barrier of the electrode material to boost the HER kinetics. In the last section, the current obstacles and future chances for the development of 2D TMDs electrocatalysts are proposed to provide insight into and valuable guidelines for fabricating effective HER electrocatalysts.

Tuning of structural and optical properties with enhanced catalytic activity in chemically synthesized Co-doped MoS2 nanosheets

Molybdenum disulfide (MoS2) nanosheets, due to having a highly active nature, being low cost and having unique physical and chemical properties, have shown their efficacy in the catalytic reduction of nitroarenes. Doping of transition metal ions in molybdenum disulfide (MoS2) nanosheets is a well-known strategy to enhance their catalytic efficiency for the reduction of nitroarenes, however, finding the optimum dopant amount is still a subject of ongoing research. Herein, we have synthesized few-layered cobalt (Co) doped MoS2 nanosheets with different cobalt content (2%, 4%, 6% and 8%) through the solvothermal approach, taking sodium molybdate dihydrate (Na2MoO4·2H2O), thiourea (CH4N2S) and cobalt acetate tetrahydrate [Co(CH3COO)2·4H2O] as precursors and their catalytic performance has been affirmed by monitoring the reduction of p-nitrophenol by NaBH4 in real time using UV-visible absorption spectroscopy. The 6% Co doped MoS2 nanosheets have exhibited superior catalytic activity with a pseudo-first order rate constant of 3.03 × 10-3 s-1 attributed to the abundant defects in the active edge sites having a dominant metallic 1T phase with Co ion activated defective basal planes, sulphur (S) edges, synergistic structural and electronic modulation between MoS2 and Co ions and enhanced electron transfer assisted through redox cycling in the active sites. An attempt has also been made to study the manipulation of structural and optical properties with cobalt doping in MoS2 nanosheets to establish a correlation between the catalytic efficiency and dopant content. This study demonstrates that proper tuning of Co doping in MoS2 nanosheets paves the way in searching for a potential alternative of a noble metal catalyst for the catalytic reduction of nitroarenes.