Mechanised nanoparticles for drug delivery

Facile room temperature synthesis of size-controlled spherical silica from silicon metal via simple sonochemical process

The waterglass or St o¨ ber method is commonly used to synthesize spherical colloidal silica; however, these methods have some disadvantages, such as complicated processes for the removal of sodium ions and expensive and energy-consuming raw materials such as tetraethoxysilane (TEOS). In this study, size-controlled spherical colloidal silica was synthesized from silicon metal at room temperature using an ultrasound process with hydrazine monohydrate as the solvent. Silicon metal dissolves easily in hydrazine monohydrate under ultrasound irradiation, and spherical colloidal silica can be synthesized by adding alcohol to this precursor solution. By changing the concentration or type of alcohol, size-controlled colloidal silica 20-200 nm in size could be easily obtained. In addition, finer and more monodisperse particles were produced by low-frequency ultrasound irradiation, which had a higher stirring effect at the particle formation stage. The present method is effective because size-controlled colloidal silica can be synthesized at room temperature using only silicon metal, hydrazine, and alcohol as raw materials, without complicated processes or expensive and energy-consuming raw materials such as TEOS or tetramethoxysilane (TMOS).

Protocrystallinity of Monodispersed Ultra-Small Templated Mesoporous Silica Nanoparticles

Monodisperse and semi-faceted ultra-small templated mesoporous silica nanoparticles (US-MSNs) of 20-25 nm were synthesized using short-time hydrolysis of tetraethoxysilane (TEOS) at room temperature, followed by a dilution for nucleation quenching. According to dynamic light scattering (DLS), a two-step pH adjustment was necessary for growth termination and colloidal stabilization. The pore size was controlled by cetyltrimethylammonium bromide (CTAB), and a tiny amount of neutral surfactant F127 was added to minimize the coalescence between US-MSNs and to favor the transition towards internal ordering. Flocculation eventually occurred, allowing us to harvest a powder by centrifugation (~60% silica yield after one month). Scanning transmission electron microscopy (STEM) and 3D high-resolution transmission electron microscopy (3D HR-TEM) images revealed that the US-MSNs are partially ordered. The 2D FT transform images provide evidence for the coexistence of four-, five-, and sixfold patterns characterizing an "on-the-edge" crystallization step between amorphous raspberry and hexagonal pore array morphologies, typical of a protocrystalline state. Calcination preserved this state and yielded a powder characterized by packing, developing a hierarchical porosity centered at 3.9 ± 0.2 (internal pores) and 68 ± 7 nm (packing voids) of high potential for support for separation and catalysis.

Fluorescent small molecule donors

Small molecule donors (SMDs) play subtle roles in the signaling mechanism and disease treatments. While many excellent SMDs have been developed, dosage control, targeted delivery, spatiotemporal feedback, as well as the efficiency evaluation of small molecules are still key challenges. Accordingly, fluorescent small molecule donors (FSMDs) have emerged to meet these challenges. FSMDs enable controllable release and non-invasive real-time monitoring, providing significant advantages for drug development and clinical diagnosis. Integration of FSMDs with chemotherapeutic, photodynamic or photothermal properties can take full advantage of each mode to enhance therapeutic efficacy. Given the remarkable properties and the thriving development of FSMDs, we believe a review is needed to summarize the design, triggering strategies and tracking mechanisms of FSMDs. With this review, we compiled FSMDs for most small molecules (nitric oxide, carbon monoxide, hydrogen sulfide, sulfur dioxide, reactive oxygen species and formaldehyde), and discuss recent progress concerning their molecular design, structural classification, mechanisms of generation, triggered release, structure-activity relationships, and the fluorescence response mechanism. Firstly, from the large number of fluorescent small molecular donors available, we have organized the common structures for producing different types of small molecules, providing a general strategy for the development of FSMDs. Secondly, we have classified FSMDs in terms of the respective donor types and fluorophore structures. Thirdly, we discuss the mechanisms and factors associated with the controlled release of small molecules and the regulation of the fluorescence responses, from which universal guidelines for optical properties and structure rearrangement were established, mainly involving light-controlled, enzyme-activated, reactive oxygen species-triggered, biothiol-triggered, single-electron reduction, click chemistry, and other triggering mechanisms. Fourthly, representative applications of FSMDs for trackable release, and evaluation monitoring, as well as for visible in vivo treatment are outlined, to illustrate the potential of FSMDs in drug screening and precision medicine. Finally, we discuss the opportunities and remaining challenges for the development of FSMDs for practical and clinical applications, which we anticipate will stimulate the attention of researchers in the diverse fields of chemistry, pharmacology, chemical biology and clinical chemistry. With this review, we hope to impart new understanding thereby enabling the rapid development of the next generation of FSMDs.

Glutathione Consumptive Dual-Sensitive Lipid-Composite Nanoparticles Induce Immunogenic Cell Death for Enhanced Breast Tumor Therapy

Although chemotherapy remains the standard therapy for tumor treatment, serious side effects can occur because of nontargeted distribution and damage to healthy tissues. Hollow mesoporous silica nanoparticles (HMSNs) modified with lipids offer potential as delivery systems to improve therapeutic outcomes and reduce adverse effects. Herein, we synthesized HMSNs with integrated disulfide bonds (HMSN) for loading with the chemotherapeutic agent oxaliplatin (OXP) which were then covered with the synthesized hypoxia-sensitive lipid (Lip) on the surface to prepare the dual-sensitive lipid-composite nanoparticles (HMSN-OXP-Lip). The empty lipid-composite nanoparticles (HMSN-Lip) would consume glutathione (GSH) in cells because of the reduction of disulfide bonds in HMSN and would also inhibit GSH production because of NADPH depletion driven by Lip cleavage. These actions contribute to increased levels of ROS that induce the immunogenic cell death (ICD) effect. Simultaneously, HMSN-Lip would disintegrate in the presence of high concentrations of GSH. The lipid in HMSN-OXP-Lip could evade payload leakage during blood circulation and accelerate the release of the OXP in the tumor region in the hypoxic microenvironment, which could significantly induce the ICD effect to activate an immune response for an enhanced therapeutic effect. The tumor inhibitory rate of HMSN-OXP-Lip was almost twice that of free OXP, and no apparent side effects were observed. This design provides a dual-sensitive and efficient strategy for tumor therapy by using lipid-composite nanoparticles that can undergo sensitive drug release and biodegradation.

Glucose oxidation induced pH stimuli response controlled release electrochemiluminescence biosensor for ultrasensitive detection of CYFRA 21-1

Herein, a self on electrochemiluminescence (ECL) biosensor was constructed by pH stimuli response controlled release strategy, in which SiO2-PEI as the carrier, BSA/luminol-Ab2 as the encapsulated substance, gold nanoparticles (Au NPs) as the blocking cap, glucose as the inducer. In addition, CeO2-Au was used as catalyst, which generated more O2•- to increase the ECL signal. Under the action of voltage, the glucose was oxidized to gluconic acid, which induced the pH to decrease accordingly. Therefore, Au NPs were stimulated to fall from the surface of SiO2-PEI, releasing the BSA/luminol-Ab2 to realize self on mode. With such design, the constructed self on ECL biosensor owned an ultrasensitive detection capacity of CYFRA 21-1, showing an excellent linear relationship in the range of 0.001-100000 ng/L and 0.4 fg/mL low limit of detection (LOD). It provided an innovative idea for the biosensor construction to clinical detection of lung cancer.

In silico description of the adsorption of cell signaling pathway proteins ovalbumin, glutathione, LC3, TLR4, ASC PYCARD, PI3K and NF-Kβ on 7.0 nm gold nanoparticles: obtaining their Lennard-Jones-like potentials through docking and molecular mechanics

The impact of vaccination on the world's population is difficult to calculate. For developing different types of vaccines, adjuvants are substances added to vaccines to increase the magnitude and durability of the immune response and the effectiveness of the vaccine. This work explores the potential use of spherical gold nanoparticles (AuNPs) as adjuvants. Thus, we employed docking techniques and molecular mechanics to describe how a AuNP 7.0 nm in diameter interacts with cell signaling pathway proteins. Initially, we used X-ray crystallization data of the proteins ovalbumin, glutathione, LC3, TLR4, ASC PYCARD, PI3K, and NF-Kβ to study the adsorption with an AuNP through molecular docking. Therefore, interaction energies were obtained for the AuNP complexes and individual proteins, as well as the AuNP and OVA complex (AuNP@OVA) with each cellular protein, respectively. Results showed that AuNPs had the highest affinity for OVA individually, followed by glutathione, ASC PYCARD domain, LC3, PI3K, NF-Kβ, and TLR4. Furthermore, when evaluating the AuNP@OVA complex, glutathione showed a greater affinity with more potent interaction energy when compared to the other studied systems.

Sliding Dynamics of a Small Charged Ring Chain on the Diblock Polyelectrolyte in Poly[2]catenane in the Presence of Counterions

In this study, we investigate the sliding dynamics of small charged ring chains along the rigid central cyclic diblock polyelectrolyte of AnBn in radial charged poly[2]catenane in the presence of counterions using molecular dynamics simulations and the Lifson-Jackson formula, and our aim is to study the effects of electrostatical interaction strength, the size of the charged small ring chain, and the rigid block length of the diblock polyelectrolyte on the sliding dynamics of a small ring chain threaded on the rigid diblock polyelectrolyte. The mean-square displacement g3(t) of a small ring chain sliding along the rigid diblock polyelectrolyte of A10B10 exhibits oscillating behavior at short time scales for the moderate electrostatical interaction strength, while for the weak or strong electrostatic interactions, it is normal subdiffusion at short time scales. For n = 1, the diffusion coefficient D of the small ring chain sliding along the rigid diblock polyelectrolyte of A1B1 decreases monotonically as the relative electrostatic interaction strength A increases from A = 0.25-4. However, for n ≠ 1, the diffusion coefficient D of the small ring chain sliding along the rigid diblock polyelectrolyte of AnBn first decreases and then increases with the increase of A, and the nonmonotonous relationship between D and A becomes more obvious for larger n. In view of the free energy potential, the sliding diffusion of a small ring chain is governed by both the width of the free energy potential well and the height of the free energy potential barrier. According to the potential of mean force (PMF) of the small ring chain sliding along the rigid diblock polyelectrolyte, we find that our results are in good agreement with the theoretical analysis using the Lifson-Jackson formula. These results may help us to understand the diffusion motion of a ring chain in radial poly[n]catenanes from a fundamental point of view and control the sliding dynamics in molecular designs.

Effect of coating using beeswax and sodium nitroprusside on chlorophyll stability and quality factors of lime during cold storage

Lime (Citrus floridana) is a quickly perishable fruit, limiting its shelf life because of reduced chlorophyll content and post-harvest quality under different storage conditions. To increase chlorophyll stability as well as other quality factors of limes, they were coated with beeswax in 0.1 wt.% and sodium nitroprusside in three various concentrations (0.1, 0.2, and 0.4 mM) at 25 °C for 3 min and then stored at 8 °C for 60 days. In this research, changes in weight loss, juice content, firmness (F), chlorophyll, chlorophyllase activity, polyphenol oxidase activity, color, total acidity (titratable acidity), ascorbic acid (ASA) and sensory evaluation were studied. During storage at low temperatures, BW surface coating (0.1%) alone, sodium nitroprusside alone, and also in combination with each other and a double layer were effective in maintaining chlorophyll and the qualitative characteristics of limes. In our observations, the best treatment was the treatment where the limes were coated by beeswax enriched by sodium nitroprusside coating. This treatment contained the highest content of lime juice and the highest chlorophyll plus the lowest activity of chlorophyllase and polyphenol oxidase, while the amount of green color was maintained to a large extent. As a result, it is possible to use beeswax enriched by sodium nitroprusside coating method to maintain the quality and chlorophyll of cold-stored lime fruits.

Balancing ring and stopper group size to control the stability of doubly threaded [3]rotaxanes

Synthesizing doubly threaded [3]rotaxanes requires the use of larger rings than more traditional singly threaded [2]rotaxanes. A key challenge in accessing stable doubly threaded [3]rotaxanes with large rings is finding the right combination of ring to stopper size. In this study, a series of doubly threaded [3]rotaxanes derived from five different sized macrocycles in the size range of 40-48 atoms and two different stopper groups, which contain 1 or 2 tris(p-t-butylbiphenyl)methyl moieties, were prepared and their kinetic stability examined. These interlocked compounds were synthesized using a metal-templated approach and fully characterized utilizing a combination of mass spectrometry, NMR spectroscopy, and size-exclusion chromatography techniques. The effect of ring size on the stability of the doubly threaded [3]rotaxane was investigated via kinetic stability tests monitored using 1H-NMR spectroscopy. By tightening the macrocycle systematically every 2 atoms from 48 to 40 atoms, a wide range of doubly threaded interlocked molecules could be accessed in which the rate of room temperature slippage of the macrocycle from the dumbbells could be tuned. Using the larger stopper group with a 48-atom ring results in no observable rotaxane, 46-44 atom macrocycles result in metastable rotaxane species with a slippage half-life of ∼5 weeks and ∼9 weeks, respectively, while macrocycles of 42 atoms or smaller yield a stable rotaxane. The smaller sized stopper is not able to fully stabilize any of the [3]rotaxane structures but metastable [3]rotaxanes are obtained with slippage half-lives of 25 ± 2 hours and 13 ± 1 days using macrocycles with 42 or 40 atoms, respectively. These results highlight the dramatic effect that relatively small ring size changes can have on the structure of doubly threaded [3]rotaxanes and lay the synthetic groundwork for a range of higher order doubly threaded interlocked architectures.

Formation of Direction-Controllable Pseudorotaxane and Catenane Using Chemically Cyclized Oligodeoxynucleotides and Their Noncovalent RNA Labeling

The formation of interlocked structures, such as rotaxane and catenane, enables noncovalent conjugations. We previously confirmed that the chemically cyclized pseudorotaxane-forming oligodeoxynucleotides (prfODNs) with double-tailed parts formed a pseudorotaxane structure with the target DNA and RNA via the slipping process. Here, we report the one-step synthesis of cyclized prfODNs from alkyne-modified ODNs, after which we investigated the properties and mechanism of the slipping process and performed noncovalent RNA labeling with prfODNs. Additionally, the catenane structure was formed by the combination of pseudorotaxane formation with a 5'-end-phosphorylated RNA and enzymatic ligation. The newly synthesized prfODN represents a new tool for achieving the noncovalent conjugation of various functional moieties to RNAs.

Stimuli-Responsive Catenane-Based Catalysts

Rotaxanes and molecular knots exhibit particular properties resulting from the presence of a mechanical bond within their structure that maintains the molecular components interlocked in a permanent manner. On the other hand, the disassembly of the interlocked architecture through the breakdown of the mechanical bond can activate properties which are masked in the parent compound. Herein, we present the development of stimuli-responsive Cu^I -complexed [2]catenanes as OFF/ON catalysts for the copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction. The encapsulation of the Cu^I ion inside the [2]catenanes inhibits its ability to catalyze the formation of triazoles. In contrast, the controlled opening of the two macrocycles induces the breaking of the mechanical bond, thereby restoring the catalytic activity of the Cu^I ion for the CuAAC reaction. Such OFF/ON catalysts can be involved in signal amplification processes with various potential applications.

Free and Poly-Methyl-Methacrylate-Bounded BODIPYs: Photodynamic and Antimigratory Effects in 2D and 3D Cancer Models

Several limitations, including dark toxicity, reduced tumor tissue selectivity, low photostability and poor biocompatibility hamper the clinical use of Photodynamic therapy (PDT) in cancer treatment. To overcome these limitations, new PSs have been synthetized, and often combined with drug delivery systems, to improve selectivity and reduce toxicity. In this context, BODIPYs (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) have recently emerged as promising and easy-to-handle scaffolds for the preparation of effective PDT antitumor agents. In this study, the anticancer photodynamic effect of newly prepared negatively charged polymethyl methacrylate (nPMMA)-bounded BODIPYs (3@nPMMA and 6@nPMMA) was evaluated on a panel of 2D- and 3D-cultured cancer cell lines and compared with free BODIPYs. In particular, the effect on cell viability was evaluated, along with their ability to accumulate into the cells, induce apoptotic and/or necrotic cell death, and inhibit cellular migration. Our results indicated that 3@nPMMA and 6@nPMMA reduce cancer cell viability in 3D models of HC116 and MCF7 cells more effectively than the corresponding free compounds. Importantly, we demonstrated that MDA-MB231 and SKOV3 cell migration ability was significantly impaired by the PDT treatment mediated by 3@nPMMA and 6@nPMMA nanoparticles, likely indicating the capability of this approach to reduce metastatic tumor potential.

One-Pot Au@Pd Dendritic Nanoparticles as Electrocatalysts with Ethanol Oxidation Reaction

The one-pot synthesis strategy of Au@Pd dendrites nanoparticles (Au@Pd DNPs) was simply synthesized in a high-temperature aqueous solution condition where cetyltrimethylammonium chloride (CTAC) acted as a reducing and capping agent at a high temperature. The Au@Pd DNPs with highly monodisperse were shown in high yields by the Au:Pd rate. The nanostructure and optical and crystalline properties of the Au@Pd DNPs were characterized by UV–vis spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction. The Au@Pd DNPs showed an efficient electrochemical catalytic performance rate toward the ethanol oxidation reaction (EOR) due to their nanostructures and Au:Pd rate.

Polymeric nanoparticles—Promising carriers for cancer therapy

Polymeric nanoparticles (NPs) play an important role in controlled cancer drug delivery. Anticancer drugs can be conjugated or encapsulated by polymeric nanocarriers, which are known as polymeric nanomedicine. Polymeric nanomedicine has shown its potential in providing sustained release of drugs with reduced cytotoxicity and modified tumor retention, but until now, few delivery systems loading drugs have been able to meet clinical demands, so more efforts are needed. This research reviews the current state of the cancer drug-loading system by exhibiting a series of published articles that highlight the novelty and functions from a variety of different architectures including micelles, liposomes, dendrimers, polymersomes, hydrogels, and metal–organic frameworks. These may contribute to the development of useful polymeric NPs to achieve different therapeutic purposes.

New Water-Soluble Magnetic Field-Induced Drug Delivery System Obtained Via Preferential Molecular Marriage over Narcissistic Self-Sorting

Nanomaterials that respond to stimuli are of considerable interest for drug delivery applications. Drug delivery has been a leading challenge when it comes to the externally triggered controlled release of hydrophobic drugs. The present paper describes a unique arrangement of polymers in a competitive environment derived from the dynamic self-sorting behavior of the hydrophobic chains of amphiphilic mPEG-PLLA and poly-l-lactic acid (PLLA)-coated iron oxide nanoparticles IONP@PLLA to achieve a core-shell structure in which the hydrophobic PLLA part acts as a dense core and poly(ethylene glycol) (PEG) as an uncrowded shell. By using irreversible covalent interactions created by hydrophobic polymer-functionalized IONPs, it was possible to selectively form socially self-sorted nanocarriers (SS-NCs) with a higher hydrophobic core than the hydrophilic shell over narcissistic self-sorted nanocarriers (NS-NCs), that is, homo-micelles of amphiphilic polymers. The higher hydrophobic core of SS-NCs is indeed helpful in achieving higher drug [doxorubicin (DOX)] loading and encapsulation efficiencies of around 17 and 90%, respectively, over 10.3 and 65.6% for NS-NCs. Furthermore, due to the presence of IONPs and the densely packed hydrophobic compartments, the controlled release of DOX was facilitated by direct magnetism and temperature stimulation when an alternating magnetic field (AMF) was applied. An appreciably higher rate of drug release (∼50%) than that without AMF (∼18%) was achieved under ambient conditions in 24 h. The present study, therefore, proposes a new drug delivery system that exceeds homo-micelles and adds an extra feature of manipulating drug release through magnetism and temperature, that is, hyperthermia.

Mechanically interlocked polymers based on rotaxanes

The nature of mechanically interlocked molecules (MIMs) has continued to encourage researchers to design and construct a variety of high-performance materials. Introducing mechanically interlocked structures into polymers has led to novel polymeric materials, called mechanically interlocked polymers (MIPs). Rotaxane-based MIPs are an important class, where the mechanically interlocked characteristic retains a high degree of structural freedom and mobility of their components, such as the rotation and sliding motions of rotaxane units. Therefore, these MIP materials are known to possess a unique set of properties, including mechanical robustness, adaptability and responsiveness, which endow them with potential applications in many emerging fields, such as protective materials, intelligent actuators, and mechanisorption. In this review, we outline the synthetic strategies, structure-property relationships, and application explorations of various polyrotaxanes, including linear polyrotaxanes, polyrotaxane networks, and rotaxane dendrimers.

Engineering mesoporous silica nanoparticles for drug delivery: where are we after two decades?

The present review details a chronological description of the events that took place during the development of mesoporous materials, their different synthetic routes and their use as drug delivery systems. The outstanding textural properties of these materials quickly inspired their translation to the nanoscale dimension leading to mesoporous silica nanoparticles (MSNs). The different aspects of introducing pharmaceutical agents into the pores of these nanocarriers, together with their possible biodistribution and clearance routes, would be described here. The development of smart nanocarriers that are able to release a high local concentration of the therapeutic cargo on-demand after the application of certain stimuli would be reviewed here, together with their ability to deliver the therapeutic cargo to precise locations in the body. The huge progress in the design and development of MSNs for biomedical applications, including the potential treatment of different diseases, during the last 20 years will be collated here, together with the required work that still needs to be done to achieve the clinical translation of these materials. This review was conceived to stand out from past reports since it aims to tell the story of the development of mesoporous materials and their use as drug delivery systems by some of the story makers, who could be considered to be among the pioneers in this area.

Metastable doubly threaded [3]rotaxanes with a large macrocycle

Ring size is a critically important parameter in many interlocked molecules as it directly impacts many of the unique molecular motions that they exhibit. Reported herein are studies using one of the largest macrocycles reported to date to synthesize doubly threaded [3]rotaxanes. A large ditopic 46 atom macrocycle containing two 2,6-bis(N-alkyl-benzimidazolyl)pyridine ligands has been used to synthesize several metastable doubly threaded [3]rotaxanes in high yield (65-75% isolated) via metal templating. Macrocycle and linear thread components were synthesized and self-assembled upon addition of iron(ii) ions to form the doubly threaded pseudo[3]rotaxanes that could be subsequently stoppered using azide-alkyne cycloaddition chemistry. Following demetallation with base, these doubly threaded [3]rotaxanes were fully characterized utilizing a variety of NMR spectroscopy, mass spectrometry, size-exclusion chromatography, and all-atom simulation techniques. Critical to the success of accessing a metastable [3]rotaxane with such a large macrocycle was the nature of the stopper group employed. By varying the size of the stopper group it was possible to access metastable [3]rotaxanes with stabilities in deuterated chloroform ranging from a half-life of <1 minute to ca. 6 months at room temperature potentially opening the door to interlocked materials with controllable degradation rates.

Novel Mesoporous Organosilicas with Task Ionic Liquids: Properties and High Adsorption Performance for Pb(II)

Removal of toxic contaminants such as Pb(II) from waste solutions is environmentally requested. Therefore, in this paper, for potential novel sorbents, mesoporous ionic liquid-functionalized silicas were synthesized and tested for the removal of Pb(II) from aqueous solutions. The successful synthesis of the adsorbents was proved by nuclear magnetic resonance (²⁹Si and ¹³C NMR), Fourier transform infrared spectroscopy (FTIR), and elemental analysis. The structural and textural properties were determined using scanning electron microscopy (SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (TEM), and low-temperature N₂ sorption, and the result showed that the applied procedure made it possible to obtain highly ordered particles with a two-dimensional mesostructure. The effects of several parameters including initial pH, contact time, adsorption temperature, and Pb(II) concentration were studied in detail and were discussed to evaluate the adsorption properties of the fabricated materials towards Pb(II). The obtained results confirmed a very high potential of the sorbents; however, the adsorption properties depend on the structure and amounts of the functional group onto fabricated materials. The sample ILS-Ox3-40 showed fast kinetics (equilibrium reached within 10 min) and capacity of 172 mg/g, and that makes it a promising sorbent for the cleanup of water contaminated by lead. It was also indicated that, regardless on structure of the tested materials, the Pb(II) removal was spontaneous and exothermic. The fabricated mesoporous silicas exhibited that they were easy to regenerate and had excellent reusability.

Treating colon cancers with a non-conventional yet strategic approach: An overview of various nanoparticulate systems

Regardless of progress in therapy management which are developed for colon cancer (CC), it remains the third most common cause of mortality due to cancers around the world. Conventional medicines pose side effects due to untoward action on non-target cells. Their inability to deliver drugs to the affected regions of the colon locally, in a reproducible manner raises a concern towards the efficacy of therapy. In this regard, nanoparticles emerged as a promising drug delivery system due to their flexibility in designing, drug release modulation and cancer cell targeting. Not only are nanoparticles making their way into colon cancer research in the revolution of conventional onco-therapeutics, but they also offer promising scope in the development of colon cancer vaccines and theranostic tools. However, there are challenges with respect to drug delivery using nanoparticles, which may hamper the delivery of these novel carriers to the colon. The present review addresses recent advents in nanotechnology for colon-specific drug delivery (CDDS) which may help to overcome the existing challenges and intends to recognize futuristic potentials in the treatment of CC with CDDS.

The Combination of Liposomes and Metallic Nanoparticles as Multifunctional Nanostructures in the Therapy and Medical Imaging-A Review

Nanotechnology has introduced a new quality and has definitely developed the possibilities of treating and diagnosing various diseases. One of the scientists' interests is liposomes and metallic nanoparticles (LipoMNPs)-the combination of which has introduced new properties and applications. However, the field of creating hybrid nanostructures consisting of liposomes and metallic nanoparticles is relatively little understood. The purpose of this review was to compile the latest reports in the field of treatment and medical imaging using of LipoMNPs. The authors focused on presenting this issue in the direction of improving the used conventional treatment and imaging methods. Most of all, the nature of bio-interactions between nanostructures and cells is not sufficiently taken into account. As a result, overcoming the existing limitations in the implementation of such solutions in the clinic is difficult. We concluded that hybrid nanostructures are used in a very wide range, especially in the treatment of cancer and magnetic resonance imaging. There were also solutions that combine treatments with simultaneous imaging, creating a theragnostic approach. In the future, researchers should focus on the description of the biological interactions and the long-term effects of the nanostructures to use LipoMNPs in the treatment of patients.

Defect-Assisted Loading and Docking Conformations of Pharmaceuticals in Metal-Organic Frameworks

Understanding of drug-carrier interactions is essential for the design and application of metal-organic framework (MOF)-based drug-delivery systems, and such drug-carrier interactions can be fundamentally different for MOFs with or without defects. Herein, we reveal that the defects in MOFs play a key role in the loading of many pharmaceuticals with phosphate or phosphonate groups. The host-guest interaction is dominated by the Coulombic attraction between phosphate/phosphonate groups and defect sites, and it strongly enhances the loading capacity. For similar molecules without a phosphate/phosphonate group or for MOFs without defects, the loading capacity is greatly reduced. We employed solid-state NMR spectroscopy and molecular simulations to elucidate the drug-carrier interaction mechanisms. Through a synergistic combination of experimental and theoretical analyses, the docking conformations of pharmaceuticals at the defects were revealed.

Silica Nanoparticles

Silica consists of one silicon atom and two oxygen atoms (SiO₂) and is commonly used in various aspects of daily life. For example, it has been used as glass, insulator, and so on. Nowadays, silica is used as core reagents for fabricating and encapsulating nanoparticles (NPs). In this chapter, the usage of silica in nanotechnology is described. Synthesis and surface modification of silica nanoparticles (SiNPs), including via the Stöber method, reverse microemulsion method, and modified sol-gel method, are illustrated. Then, various NPs with silica encapsulation are explained. At last, the biological applications of those mentioned NPs are described.

Magnetic properties of γ-Fe2O3 nanoparticles in a porous SiO2 shell for drug delivery

A method is presented for synthesizing core-shell nanoparticles with a magnetic core and a porous shell suitable for drug delivery and other medical applications. The core contains multiple γ-Fe2O3 nanoparticles (∼15 nm) enclosed in a SiO2 (∼100-200 nm) matrix using either methyl (denoted TMOS-γ-Fe2O3) or ethyl (TEOS-γ-Fe2O3) template groups. Low-temperature Mössbauer spectroscopy showed that the magnetic nanoparticles have the maghemite structure, γ-Fe2O3, with all the vacancies in the octahedral sites. Saturation magnetization measurements revealed that the density of γ-Fe2O3 was greater in the TMOS-γ-Fe2O3 nanoparticles than TEOS-γ-Fe2O3 nanoparticles, presumably because of the smaller methyl group. Magnetization measurements showed that the blocking temperature is around room temperature for the TMOS-γ-Fe2O3 and around 250 K for the TEOS-γ-Fe2O3. Three dimensional topography analysis shows clearly that the magnetic nanoparticles are not only at the surface but have penetrated deep in the silica to form the core-shell structure.

Fluorescent spherical mesoporous silica nanoparticles loaded with emodin: Synthesis, cellular uptake and anticancer activity

The natural product emodin (EO) exhibits anti-inflammatory, antiangiogenesis and antineoplastic properties in vitro and in vivo. Due to its biological properties as well as its fluorescence, EO can be useful in pharmacology and pharmacokinetics. To enhance its selectivity to cancer cells, EO was loaded into non-fluorescent and novel fluorescent spherical mesoporous nanoparticles bearing N-methyl isatoic anhydride (SNM~M) or lissamine rhodamine B sulfonyl moieties (SNM~L). The propylamine functionalized mesoporous silica nanomaterial (SNM) were characterized by powder X-ray diffraction (XRD), nitrogen gas sorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), fluorescence spectroscopy, thermogravimetric analysis (TGA) and UV spectroscopy. The cytotoxicity of EO-loaded nanoparticles was tested against the human colon carcinoma cell line HT-29. Non-loaded SNM did not affect cell proliferation, whereas those loaded with EO were at least as efficient as EO alone. It could be shown by fluorescence microscopy that the uptake of silica nanomaterial by the tumor cells occurred within 2 h and the release of EO occurred within 48 h of treatment. Flow cytometry and Western blot analysis showed that SNM containing EO induced apoptosis in HT-29 cells.

Functionalized Fluorescent Silica Nanoparticles for Bioimaging of Cancer Cells

Functionalized fluorescent silica nanoparticles were designed and synthesized to selectively target cancer cells for bioimaging analysis. The synthesis method and characterization of functionalized fluorescent silica nanoparticles (50-60 nm), as well as internalization and subcellular localization in HeLa cells is reported here. The dye, rhodamine 101 (R101) was physically embedded during the sol-gel synthesis. The dye loading was optimized by varying the synthesis conditions (temperature and dye concentration added to the gel) and by the use of different organotriethoxysilanes as a second silica precursor. Additionally, R101, was also covalently bound to the functionalized external surface of the silica nanoparticles. The quantum yields of the dye-doped silica nanoparticles range from 0.25 to 0.50 and demonstrated an enhanced brightness of 230-260 fold respect to the free dye in solution. The shell of the nanoparticles was further decorated with PEG of 2000 Da and folic acid (FA) to ensure good stability in water and to enhance selectivity to cancer cells, respectively. In vitro assays with HeLa cells showed that fluorescent nanoparticles were internalized by cells accumulating exclusively into lysosomes. Quantitative analysis showed a significantly higher accumulation of FA functionalized fluorescent silica nanoparticles compared to nanoparticles without FA, proving that the former may represent good candidates for targeting cancer cells.

Photo-responsive degradable hollow mesoporous organosilica nanoplatforms for drug delivery

BACKGROUND

Stimulus-responsive degradable mesoporous organosilica nanoparticles (MONs) have shown great promise as drug carriers via enhancing the efficiency of drug delivery and accelerating the degradation of nanocarriers. However, it remains a great challenge to develop novel light-enabled spatial and temporal degradable MONs with both superior responsiveness for efficient anti-cancer drug delivery and safe exocytosis.

RESULTS

We report a novel photo-responsive degradable hollow mesoporous organosilica nanoplatform (HMONs@GOQD). The platform is based on organosilica nanoparticles (HMONs) containing singlet oxygen (¹O₂)-responsive bridged organoalkoxysilanes and wrapped graphene oxide quantum dots (GOQDs). The unique hollow mesoporous structure of the HMONs guarantees an excellent drug loading and release profile. During light irradiation, ¹O₂ produced by the GOQDs leads to the degradation of the organosilica nanoparticles, resulting in enhanced local drug release.

CONCLUSIONS

We carried out in vitro and in vivo experiments using DOX as a model drug; DOX-HMONs@GOQDs exhibited high biocompatibility, accelerated degradation, and superior therapeutic efficacy during light irradiation, indicating a promising platform for clinical cancer therapy.

A precise polyrotaxane synthesizer

Mechanically interlocked molecules are likely candidates for the design and synthesis of artificial molecular machines. Although polyrotaxanes have already found niche applications in exotic materials with specialized mechanical properties, efficient synthetic protocols to produce them with precise numbers of rings encircling their polymer dumbbells are still lacking. We report the assembly line-like emergence of poly[n]rotaxanes with increasingly higher energies by harnessing artificial molecular pumps to deliver rings in pairs by cyclical redox-driven processes. This programmable strategy leads to the precise incorporation of two, four, six, eight, and 10 rings carrying 8+, 16+, 24+, 32+, and 40+ charges, respectively, onto hexacationic polymer dumbbells. This strategy depends precisely on the number of redox cycles applied chemically or electrochemically, in both stepwise and one-pot manners.

Biodegradable nanofibrous temperature-responsive gelling microspheres for heart regeneration

Myocardial infarction (heart attack) is the number one killer of heart patients. Existing treatments for heart attack do not address the underlying problem of cardiomyocyte (CM) loss and cannot regenerate the myocardium. Introducing exogenous cardiac cells is required for heart regeneration due to the lack of resident progenitor cells and very limited proliferative potential of adult CMs. Poor retention of transplanted cells is the critical bottleneck of heart regeneration. Here, we report the invention of a poly(l-lactic acid)-b-poly(ethylene glycol)-b-poly(N-Isopropylacrylamide) copolymer and its self-assembly into nanofibrous gelling microspheres (NF-GMS). The NF-GMS undergo thermally responsive transition to form not only a 3D hydrogel after injection in vivo, but also exhibit architectural and structural characteristics mimicking the native extracellular matrix (ECM) of nanofibrous proteins and gelling proteoglycans or polysaccharides. By integrating the ECM-mimicking features, injectable form, and the capability of maintaining 3D geometry after injection, the transplantation of hESC-derived CMs carried by NF-GMS led to a striking 10-fold graft size increase over direct CM injection in an infarcted rat model, which is the highest reported engraftment to date. Furthermore, NF-GMS carried CM transplantation dramatically reduced infarct size, enhanced integration of transplanted CMs, stimulated vascularization in the infarct zone, and led to a substantial recovery of cardiac function. The NF-GMS may also serve as advanced injectable and integrative biomaterials for cell/biomolecule delivery in a variety of biomedical applications.

Comprehensive understanding of the synthesis and formation mechanism of dendritic mesoporous silica nanospheres

The interest in the design and controlled fabrication of dendritic mesoporous silica nanospheres (DMSNs) emanates from their widespread application in drug-delivery carriers, catalysis and nanodevices owing to their unique open three-dimensional dendritic superstructures with large pore channels and highly accessible internal surface areas. A variety of synthesis strategies have been reported, but there is no basic consensus on the elucidation of the pore structure and the underlying formation mechanism of DMSNs. Although all the DMSNs show a certain degree of similarity in structure, do they follow the same synthesis mechanism? What are the exact pore structures of DMSNs? How did the bimodal pore size distributions kinetically evolve in the self-assembly? Can the relative fractions of small mesopores and dendritic large pores be precisely adjusted? In this review, by carefully analysing the structures and deeply understanding the formation mechanism of each reported DMSN and coupling this with our research results on this topic, we conclude that all the DMSNs indeed have the same mesostructures and follow the same dynamic self-assembly mechanism using microemulsion droplets as super templates in the early reaction stage, even without the oil phase.

Exploring BODIPY Derivatives as Singlet Oxygen Photosensitizers for PDT

This minireview is devoted to honoring the memory of Dr. Thomas Dougherty, a pioneer of modern photodynamic therapy (PDT). It compiles the most important inputs made by our research group since 2012 in the development of new photosensitizers based on BODIPY chromophore which, thanks to the rich BODIPY chemistry, allows a finely tuned design of the photophysical properties of this family of dyes to serve as efficient photosensitizers for the generation of singlet oxygen. These two factors, photophysical tuning and workable chemistry, have turned BODIPY chromophore as one of the most promising dyes for the development of improved photosensitizers for PDT. In this line, this minireview is mainly related to the establishment of chemical methods and structural designs for enabling efficient singlet oxygen generation in BODIPYs. The approaches include the incorporation of heavy atoms, such as halogens (iodine or bromine) in different number and positions on the BODIPY scaffold, and also transition metal atoms, by their complexation with Ir(III) center, for instance. On the other hand, low-toxicity approaches, without involving heavy metals, have been developed by preparing several orthogonal BODIPY dimers with different substitution patterns. The advantages and drawbacks of all these diverse molecular designs based on BODIPY structural framework are described.

AT-CuAAC Synthesis of Mechanically Interlocked Oligonucleotides

We present a simple strategy for the synthesis of main chain oligonucleotide rotaxanes with precise control over the position of the macrocycle. The novel DNA-based rotaxanes were analyzed to assess the effect of the mechanical bond on their properties.

Effects of topological constraints on linked ring polymers in solvents of varying quality

We investigate the effects of topological constraints in catenanes composed of interlinked ring polymers on their size in a good solvent as well as on the location of their θ-point when the solvent quality is worsened. We mainly focus on poly[n]catenanes consisting of n ring polymers each of length m interlocked in a linear fashion. Using molecular dynamics simulations, we study the scaling of the poly[n]catenane's radius of gyration in a good solvent, assuming in general that Rg∼mμnν and we find that μ = 0.65 ± 0.02 and ν = 0.60 ± 0.01 for the range of n and m considered. These findings are further rationalized with the help of a mean-field Flory-like theory yielding the values of μ = 16/25 and ν = 3/5, consistent with the numerical results. We show that individual rings within catenanes feature a surplus swelling due to the presence of NL topological links. Furthermore, we consider poly[n]catenanes in solvents of varying quality and we demonstrate that the presence of topological links leads to an increase of its θ-temperature in comparison to isolated linear and ring chains with the following ordering: T > T > T. Finally, we show that the presence of links similarly raises the θ-temperature of a single linked ring in comparison to an unlinked one, bringing its θ-temperature close to the one of a poly[n]catenane.

The non-covalent complexes of α- or γ-cyclodextrin with divalent metal cations determined by mass spectrometry

Noncovalent complexes between cyclodextrin (CD) and divalent metal cations drew growing attentions due to their applications in the pharmaceutical industry for molecular recognition. In this study, gas-phase binding of noncovalent complexes between α-, or γ-CD and divalent metal cations was investigated by electrospray ionization mass spectrometry (ESI-MS), demonstrating the formation of 1:1 stoichiometric noncovalent complexes. The binding of the complexes were furtherly confirmed by collision-induced dissociation (CID) with tandem mass spectrometry. The CID revealed the fragmentation pattern were strongly dependent on the electronic configuration of the cations and the charge separation reaction frequently took place in the cyclodextrin-complexes with transition metal cations. For the non-covalent complexes of α-CD with Mg²⁺, Ca²⁺, Sr²⁺ or Ba²⁺ at a collision energy of 25 eV, the fragments attributed to [α-CD + cation-nGlucose unit]²⁺ were observed (named series A). However, for the γ-CD complexes with transition metal cations Co²⁺, Ni²⁺, Cu²⁺ or Zn²⁺, apart from fragments of series A, it were observed fragment ions of [γ-CD + cation-nGlucose unit]⁺ (named series B), together with the Glucose unit (m/z 163.2) and its products with loss of H₂O (m/z 145.2 and 126.8). The CID performed at a collision energy from 10 to 50 eV showed that the binding strength of complexes increase in the order of [α-CD + Mg]²⁺, [α-CD + Ca]²⁺, [α-CD + Sr]²⁺ and [α-CD + Ba]²⁺. Through mass spectrometric titrations, the values of dissociation constant K_d (in μmol•L^-1) for the complexes of α-CD with Ca²⁺ or Ni²⁺ were obtained, which were 4.30 and 4.26, respectively.

Zinc oxide end-capped Fe3O4@mSiO2 core-shell nanocarriers as targeted and responsive drug delivery system for chemo-/ions synergistic therapeutics

Multifunctional core-shell nanocarriers based on zinc oxide (ZnO)-gated magnetic mesoporous silica nanoparticles (MMSN) were prepared for cancer treatment through magnetic targeting and pH-triggered controlled drug release. Under an external magnetic field, the MMSN could actively deliver chemotherapeutic agent, daunomycin (DNM), to the targeted sites. At neutral aqueous, the functionalized MMSN could stably accommodate the DNM molecules since the mesopores were capped by the ZnO gatekeepers. In contrast, at the acid intercellular environment, the gatekeepers would be removed to control the release of drugs due to the dissolution of ZnO. Meanwhile, ZnO quantum dots not only rapidly dissolve in an acidic condition of cancer cells but also enhance the anti-cancer effect of Zn2+. An in vitro controlled release proliferation indicated that the acid sensitive ZnO gatekeepers showed well response by the 'on-off' switch of the pores. Cellular experiments against cervical cancer cell (HeLa cells) further showed that functionalized MMSN significantly suppressed cancer cells growth through synergistic effects between the chemotherapy and Zn2+ ions with monitoring the treatment process. These results suggested that the ZnO-gated MMSN platform is a promising approach to serve as a pH-sensitive system for chemotherapies delivery and Zn2+ controlled release for further application in the treatment of various cancers by synergistic effects.

Luminescent nanohybrids based on silica and silylated Ru(II)-Yb(III) heterobinuclear complex: new tools for biological media analysis

Lanthanide (Ln) complexes emitting in the near-infrared (NIR) region have fostered great interest as upcoming optical tags owing to their high spatial and temporal resolution emission as well deeper light penetration in biological tissues for non-invasive monitoring. For use in live-cell imaging, lanthanide complexes with long-wavelength absorption and good brightness are especially critical. Light-harvesting ligands of Ln complexes are typically excited in the ultraviolet region, which in turn trigger simultaneously autofluorescence and long-exposition damage of living systems. The association of d-metalloligands rather than organic chromophores enables the excitation of NIR-emitting Ln complex occurs in the visible region. Taking advantage of the long-lived excited states and intense absorption band in the ultraviolet (UV) to NIR region of Ru(II), we successfully design a dual-emitting (in the visible and NIR region) d-f heterobinuclear complex based on Ru(II) metalloligand and Yb(III) complex. In addition, we developed luminescent nanohybrids by grafting of Ru(II)-Yb(III) heterobinuclear complexes containing silylated ligands on the surface of mesoporous and dense silica matrix. The nanomarkers were successfully applied for imaging of murine melanoma B16-F10 and neonatal human dermal fibroblast HDFn cell cultures by one-photon or two-photon absorption using laser scanning confocal microscopy. Great cellular uptake, low cytotoxicity and the possibility to achieve visible and NIR emission via two-photons excitation show that the nanohybrids are remarkable markers for in vitro and a potential tool for in vivo applications.

Recent Advances in Application of Azobenzenes Grafted on Mesoporous Silica Nanoparticles in Controlled Drug Delivery Systems Using Light as External Stimulus

Hybrid materials based on Mesoporous Silica Nanoparticles (MSN) have attracted plentiful attention due to the versatility of their chemistry, and the field of Drug Delivery Systems (DDS) is not an exception. MSN present desirable biocompatibility, high surface area values, and a well-studied surface reactivity for tailoring a vast diversity of chemical moieties. Particularly important for DDS applications is the use of external stimuli for drug release. In this context, light is an exceptional alternative due to its high degree of spatiotemporal precision and non-invasive character, and a large number of promising DDS based on photoswitchable properties of azobenzenes have been recently reported. This review covers the recent advances in design of DDS using light as an external stimulus mostly based on literature published within last years with an emphasis on usually overlooked underlying chemistry, photophysical properties, and supramolecular complexation of azobenzenes.

An ultrasensitive fluorescence sensor for determination of trace levels of copper in blood samples

A novel SBA-15-based fluorescent sensor, SBA-PI: mesoporous SBA-15 structure modified with iminostilbene groups, was designed, synthesized, and characterized by Fourier transform-infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), low-angle X-ray diffraction techniques (low-angle XRD), and N₂ adsorption-desorption techniques. The SBA-PI as a sensor with a selective behavior for detection of Cu²⁺ comprises iminostilbene carbonyl as the fluorophore group. The SBA-PI sensor displays an excellent fluorescence response in aqueous solutions and the fluorescence intensity quenches remarkably upon addition of Cu²⁺. Other common interfering ions even at high concentration ratio showed either no or very small changes in the fluorescence intensity of SBA-PI in the absence of Cu²⁺. A limit of detection of 8.7 × 10^-9 M for Cu²⁺ indicated that this fluorescence sensor has a high sensitivity and selectivity toward the target copper (II) ion. The fabricated Cu²⁺ sensor was successfully applied for the determination of the Cu²⁺ in human blood samples without any significant interference. With the selective analysis of Cu²⁺ ions down to 0.9 nM in blood, the sensor is a promising and a novel detection candidate for Cu²⁺ and can be applied in the clinical laboratory. A reversibility and accuracy in the fluorescence behavior of the sensor was found in the presence of I^¯ that was described as a masking agent for Cu²⁺. Graphical abstract.

From isolated structures to continuous networks: A categorization of cytoskeleton-based motile engineered biological microstructures

As technology at the small scale is advancing, motile engineered microstructures are becoming useful in drug delivery, biomedicine, and lab-on-a-chip devices. However, traditional engineering methods and materials can be inefficient or functionally inadequate for small-scale applications. Increasingly, researchers are turning to the biology of the cytoskeleton, including microtubules, actin filaments, kinesins, dyneins, myosins, and associated proteins, for both inspiration and solutions. They are engineering structures with components that range from being entirely biological to being entirely synthetic mimics of biology and on scales that range from isotropic continuous networks to single isolated structures. Motile biological microstructures trace their origins from the development of assays used to study the cytoskeleton to the array of structures currently available today. We define 12 types of motile biological microstructures, based on four categories: entirely biological, modular, hybrid, and synthetic, and three scales: networks, clusters, and isolated structures. We highlight some key examples, the unique functionalities, and the potential applications of each microstructure type, and we summarize the quantitative models that enable engineering them. By categorizing the diversity of motile biological microstructures in this way, we aim to establish a framework to classify these structures, define the gaps in current research, and spur ideas to fill those gaps. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Nanotechnology Approaches to Biology > Cells at the Nanoscale Biology-Inspired Nanomaterials > Protein and Virus-Based Structures Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Nanomachines and Other Caps on Mesoporous Silica Nanoparticles for Drug Delivery

Mesoporous silica nanoparticles (MSNs) are delivery vehicles that can carry cargo molecules and release them on command. The particles used in the applications reported in this Account are around 100 nm in diameter (about the size of a virus) and contain 2.5 nm tubular pores with a total volume of about 1 cm³/g. For the biomedical applications discussed here, the cargo is trapped in the pores until the particles are stimulated to release it. The challenges are to get the particles to the site of a disease and then to deliver the cargo on command. We describe methods to do both, and we illustrate the applicability of the particles to cure cancer and intracellular infectious disease. Our first steps were to design multifunctional nanoparticles with properties that allow them to carry and deliver hydrophobic drugs. Many important pharmaceuticals are hydrophobic and cannot reach the diseased sites by themselves. We describe how we modified MSNs to make them dispersible, imagable, and targetable and discuss in vitro studies. We then present examples of surface modifications that allow them to deliver large molecules such as siRNA. In vivo studies of siRNA delivery to treat triple-negative breast and ovarian cancers are presented. The next steps are to attach nanomachines and other types of caps that trap drug molecules but release them when stimulated. We describe nanomachines that respond autonomously (without human intervention) to stimuli specific to disease sites. A versatile type of machine is a nanovalve that is closed at neutral (blood) pH but opens upon acidification that occurs in endolysosomes of cancer cells. Another type of machine, a snap-top cap, is stimulated by reducing agents such as glutathione in the cytosol of cells. Both of these platforms were studied in vitro to deliver antibiotics to infected macrophages and in vivo to cure and kill the intracellular bacteria M. tuberculosis and F. tularensis. The latter is a tier 1 select agent of bioterrorism. Finally, we describe nanomachines for drug delivery that are controlled by externally administered light and magnetic fields. A futuristic dream for nanotherapy is the ability to control a nano-object everywhere in the body. Magnetic fields penetrate completely and have spatial selectivity governed by the size of the field-producing coil. We describe how to control nanovalves with alternating magnetic fields (AMFs) and superparamagnetic cores inside the MSNs. The AMF heats the cores, and temperature-sensitive caps release the cargo. In vitro studies demonstrate dose control of the therapeutic to cause apoptosis without overheating the cells. Nanocarriers have great promise for therapeutic applications, and MSNs that can carry drugs to the site of a disease to produce a high local concentration without premature release and off-target damage may have the capability of realizing this goal.

"Three-Bullets" Loaded Mesoporous Silica Nanoparticles for Combined Photo/Chemotherapy

This contribution reports the design, preparation, photophysical and photochemical characterization, as well as a preliminary biological evaluation of mesoporous silica nanoparticles (MSNs) covalently integrating a nitric oxide (NO) photodonor (NOPD) and a singlet oxygen (¹O₂) photosensitizer (PS) and encapsulating the anticancer doxorubicin (DOX) in a noncovalent fashion. These MSNs bind the NOPD mainly in their inner part and the PS in their outer part in order to judiciously exploit the different diffusion radius of the cytotoxic NO and ¹O₂. Furthermore this silica nanoconstruct has been devised in such a way to permit the selective excitation of the NOPD and the PS with light sources of different energy in the visible window. We demonstrate that the individual photochemical performances of the photoactive components of the MSNs are not mutually affected, and remain unaltered even in the presence of DOX. As a result, the complete nanoconstruct is able to deliver NO and ¹O₂ under blue and green light, respectively, and to release DOX under physiological conditions. Preliminary biological results performed using A375 cancer cells show a good tolerability of the functionalized MSNs in the dark and a potentiated activity of DOX upon irradiation, due to the effect of the NO photoreleased.

Novel photoresponsive cyclicparaphenylenediazenes: structure, strain energy, cis-trans isomerization, and electronic properties

A series of cis-trans isomers of cyclicparaphenylenediazenes (CPPDs) have been designed to explore their potential applications in solar thermal fuels and photoswitchable devices. In this work, three isomers of cis-trans-[3]CPPD, seven isomers of cis-trans-[4]CPPD, eleven isomers of cis-trans-[5]CPPD, and sixteen isomers of cis-trans-[6]CPPD have been proposed using density functional theory (DFT) at the B3LYP/6-31+G(d,p) level of theory. The stability of these CPPDs has been quantified by the homodesmotic reaction approach. Strain energies (SE) indicate that 3-cct, 4-ctct-anti, 5-cctct-anti, and 6-cttttc-anti are stable molecules in their respective CPPDs. The SE and heats of formation of cis-trans-CPPDs were also compared with those of all-cis-CPPDs and all-trans-CPPD isomers. The calculations suggest that cis-trans-CPPDs are more stable than all-cis and all-trans-CPPDs. The SE and also suggest that 3-cct, 4-ctct-anti, 5-cctct-anti, and 6-cttttc-anti are important candidates for laboratory test. The calculated highest occupied molecular orbital (HOMO) to the lowest unoccupied molecular orbital (LUMO) energy gaps of cis-trans-CPPDs indicate that these oligomers are potential materials for the construction of solar cells. Time-dependent (TD) DFT calculations of CPPDs show a characteristic peak in the range of 450 nm to 600 nm, which is consistent with previous studies. The predicted structures, and thermochemical and electronic properties can be a good starting point for the synthesis of CPPD-based photoswitchable and solar fuel cell devices.

New insights towards mesoporous silica nanoparticles as a technological platform for chemotherapeutic drugs delivery

Mesoporous silica nanoparticles (MSNs) displays interesting properties for biomedical applications such as high chemical stability, large surface area and tunable pores diameters and volumes, allowing the incorporation of large amounts of drugs, protecting them from deactivation and degradation processes acting as an excellent nanoplatform for drug delivery. However, the functional MSNs do not present the ability to transport the therapeutics without any leakage until reach the targeted cells causing side effects. On the other hand, the hydroxyls groups available on MSNs surface allows the conjugation of specific molecules which can binds to the overexpressed Enhanced Growth Factor Receptor (EGFR) in many tumors, representing a potential strategy for the cancer treatment. Beyond that, the targeting molecules conjugate onto mesoporous surface increase its cell internalization and act as gatekeepers blocking the mesopores controlling the drug release. In this context, multifunctional MSNs emerge as stimuli-responsive controlled drug delivery systems (CDDS) to overcome drawbacks as low internalization, premature release before to reach the region of interest, several side effects and low effectiveness of the current treatments. This review presents an overview of MSNs fabrication methods and its properties that affects drug delivery as well as stimuli-responsive CDDS for cancer treatment.