Oil fingerprinting analysis using commercial solid phase extraction (SPE) cartridge and gas chromatography-mass spectrometry (GC-MS)

Evaluating the reliability of solid phase extraction techniques for hydrocarbon analysis by GC-MS

Saturate and aromatic compounds are essential in the petroleum industry for assessing the thermal maturity of source rocks and oils, which is critical for basin modeling and sweet-spot mapping. These compounds also play a role in environmental applications, such as oil spill fingerprinting and biogeochemistry. However, the analysis of these compounds by gas chromatography-mass spectrometry (GC-MS) requires meticulous and time-consuming separation processes. Traditional methods like normal-phase liquid column chromatography (LCC) involve large volumes of harmful solvents. This study evaluates the effectiveness of five different sorbents using solid-phase extraction (SPE) techniques-neutral Si, SiOH, Ag-ion, neutral Al, and Ag-ion mixed with activated silica-compared to LCC. The goal was to discern differences in peak resolution, concentration, and isomer ratios of saturate and aromatic compounds for thermal maturity and source rock assessments. The results show that SiOH, neutral Si, and neutral Al do not fully separate aromatic compounds from the saturate fraction, sometimes leaving 40-100% of aromatics within the saturate fraction. Ag-ion mixed with activated silica provided the best separation, resulting in up to 23 times higher aromatic concentration than SiOH. This method is more reliable for quantifying both saturate and aromatic compounds, increases the efficiency of hydrocarbon evaluations, and reduces solvent consumption by 63%, offering a more sustainable approach to hydrocarbon analysis.

Parallel quantitation of salt dioctyl sodium sulfosuccinate (DOSS) and fingerprinting analysis of dispersed oil in aqueous samples

In many jurisdictions, dispersants are included in contingency plans as a viable countermeasure that can help reduce the overall environmental impact of marine oil spills. When used, it is imperative to monitor the progression of dispersant and oil to assess their environmental fate and behaviour. Amphiphilic salt dioctyl sodium sulfosuccinate (DOSS) is the major effective component of the most commonly available dispersants, such as Corexit® EC9500A. Without proper sample preparation, dispersed oil in water samples could interfere with the accurate analysis of DOSS and easily contaminate the LC-MS system. In this work, solid phase extraction (SPE) weak anion exchange (WAX) cartridges were used to separate oil and DOSS in aqueous samples. DOSS was accurately determined by liquid chromatography coupled with a high resolution Orbitrap mass spectrometer (LC-HRMS). Oil fingerprinting analysis was conducted and total petroleum hydrocarbons (TPHs), polycyclic aromatic hydrocarbons (PAHs), and petroleum biomarkers were determined by gas chromatography-flame ionization detection (GC-FID) and mass spectrometry (GC-MS). This SPE-LC/GC-MS method was used for the analysis of oil-dispersant water samples containing a mixture of Corexit® EC9500A and a selection of crude oils and refined petroleum products. Nearly a 100% DOSS recovery was obtained for various oil-surfactant conditions. Parallel quantitation of oils with dispersants was achieved using this method. A portion of the TPH loss was possibly attributed to oil retained by the SPE column. Chemical fingerprints and diagnostic ratios of target compounds in recovered dispersed oil overall remain unchanged compared with those of all studied oils.

Microorganisms as Bio-SPE Materials for Extraction of Pharmaceutical Drugs: Mechanism of Extraction

In solid-phase extraction (SPE), the extraction materials depend on the physicochemical interactions to obtain the target analytes from complex systems. However, many matrix interferences existing in real samples influence the extraction efficiency through these common interactions. Therefore, extraction materials based on more special interactions for biological systems need to be developed. In this work, live microorganisms including Escherichia coli and Staphylococcus aureus were considered as the potential biological SPE (bio-SPE) materials with their biological functions in the live state. To study the enrichment and selectivity of the bio-SPE, four antibacterial drugs and two non-antibacterial drugs were employed as the target analytes. The enrichment factor (EF) was used as the evaluation index. The results showed that when using chlorpheniramine (CPM) and ofloxacin (OFLO), the enrichment capacity of E. coli was better than that of S. aureus. When extracting a single analyte, the enrichment ability of E. coli for CPM was significantly higher than other analytes, and the EF was 8.5. In a mixture solution of antibacterial analytes, OFLO could be enriched mostly by E. coli. However, in the mixture solution of antibacterial and non-antibacterial analytes, CPM was enriched more than that of antibacterial analytes. In real rat plasma, bio-SPE using live E. coli could obviously extract CPM, while traditional liquid-liquid extraction could not. The confocal microscopy results showed that the extraction mechanism may not only depend on the surface adsorption of bacteria with analytes but also on the uptake into bacteria. This provides a valuable basis for the development of more biological separation materials based on biological interactions.

Spectroscopic Fingerprinting of Organic Material Extracted from Tight Chalk Core Samples of the North Sea

The detailed chemical composition of crude oil in subsurface reservoirs provides important information about reservoir connectivity and can potentially play a very important role for the understanding of recovery processes. Relying on studying produced oil samples alone to understand the rock-fluid and fluid-fluid interactions is insufficient as the heavier polar components may be retained by tight reservoirs and not produced. These heavy and polar compounds that constitute the resin and asphaltene fractions of crude oil are typically present in low concentrations and yet are determining for the physical-chemical properties of the oil because of their polarity. In order to obtain a fingerprint analysis of oils including polar compounds from different wells, the oil content of drill cores has been extracted and analyzed. Infrared spectroscopy has been used to perform chemical fingerprinting of the oil extracted from drill cores sampled in different geographical locations of the Danish North Sea. Statistical analysis has been employed to identify the chemical differences within the sample set and explore the link between chemical composition and geographic location of the sample. A principal component analysis, based on spectral peak fitting in the 1800-1400 cm^-1 range, has allowed for statistical grouping of the samples and identified the primary chemical feature characteristic of these groups. Statistically significant differences in the quantities of polar oxygen- and nitrogen-containing compounds were found between the oil wells. The results of this analysis have been used as guidelines and reference to establish an express statistical approach based on the full-range infrared spectra for a further expansion of the sample set. The chemical information presented in this work is discussed in relation to oil fingerprinting and geochemical analysis.

Quantitative analysis of PAH compounds in DWH crude oil and their effects on Caenorhabditis elegans germ cell apoptosis, associated with CYP450s upregulation

The Deepwater Horizon (DWH) oil spill marked the largest environmental oil spill in human history, where it was estimated a large amount of the polycyclic aromatic hydrocarbons (PAHs) were released with crude oil into the environment. In this study, common PAH compounds were quantitatively determined in crude oil from the DWH spill by gas chromatography-mass spectroscopy (GC-MS). Twelve PAH compounds were identified and quantified from a 100× dilution of DWH crude oil: naphthalene (7800 ng/mL), acenaphthylene (590 ng/mL), acenaphtehen (540 ng/mL), fluorene (2550 ng/mL), phenanthrene (2910 ng/mL), anthracene (840 ng/mL), fluoranthene (490 ng/mL), pyrene (290 ng/mL), benzo(k) fluoranthene (1050 ng/mL), benzo(b)fluoranthene (1360 ng/mL), dibenz(a,h)anthracene (2560 ng/mL), and benzo(g, h, i) perylene (630 ng/mL). Toxicity assays using the nematode, Caenorhabditis elegans (C. elegans), indicated a single PAH compound naphthalene, exposure increased C. elegans germ cell apoptosis which may adversely affect progeny reproduction. The number of apoptotic germ cells significantly increased from 1.4 to 2.5 when worms were treated with 10 μg/mL of naphthalene and from 1.3 to 2.5 and 3.5 cells in presence of 1 μg/mL and 5 μg/mL of benzo(a)pyrene, respectively. Five CYP450 genes (CYP14A3, CYP35A1, CYP35A2, CYP35A5, and CYP35C1) were significantly upregulated following 500× dilution of dispersed crude oil exposure (p < 0.05). These results suggest that CYP450s may play a role in bioactivation of PAHs in crude oil, resulting in DNA damage related germ cell apoptosis.

Polycyclic aromatic hydrocarbons (PAHs) and putative PAH-degrading bacteria in Galveston Bay, TX (USA), following Hurricane Harvey (2017)

Hurricane Harvey was the wettest hurricane in US history bringing record rainfall and widespread flooding in Houston, TX. The resulting storm- and floodwaters largely emptied into the Galveston Bay. Surface water was collected from 10 stations during five cruises to investigate the concentrations and sources of 16 priority polycyclic aromatic hydrocarbons (PAHs), and relative abundances of PAH-degrading bacteria. Highest PAH levels (102-167 ng/L) were detected during the first sampling event, decreasing to 36-69 ng/L within a week. Four sites had elevated concentrations of carcinogenic benzo[a]pyrene that exceeded the Texas Standard for Surface Water threshold. The highest relative abundances of known PAH-degrading bacteria Burkholderiaceae, Comamonadaceae, and Sphingomonadales were detected during the first and second sampling events. PAH origins were about 60% pyrogenic, 2% petrogenic, and the remainder of mixed sources. This study improves our understanding on the fate, source, and distributions of PAHs in Galveston Bay after an extreme flooding event.

Influence of pressure and dispersant on oil biodegradation by a newly isolated Rhodococcus strain from deep-sea sediments of the gulf of Mexico

A new Rhodococcus strain, capable of degrading crude oil, was isolated from the Gulf of Mexico deep-sea sediment and was investigated for its biodegradation characteristics under atmospheric as well as under deep-sea pressure (1500 m = 15 MPa). Additionally, the effect of dispersant (Corexit EC9500A) addition was studied. Rhodococcus sp. PC20 was shown to degrade 60.5 ± 10.7% of the saturated and aromatic fraction of crude oil at atmospheric pressure and 74.2 ± 9.1% at deep-sea level pressure within 96 h. Degradation rates, especially for monoaromatic hydrocarbons, were significantly higher at elevated pressure compared to atmospheric pressure. This study found a growth inhibiting effect at a dispersant to oil ratio of 1:100 and higher. This effect of the dispersant was enhanced when elevated pressure was applied.

Source apportionment of an epiphytic lichen biomonitor to elucidate the sources and spatial distribution of polycyclic aromatic hydrocarbons in the Athabasca Oil Sands Region, Alberta, Canada

The sources and spatial distribution of polycyclic aromatic hydrocarbons (PAHs) atmospheric deposition in the boreal forests surrounding bitumen production operations in the Athabasca Oil Sands Region (AOSR), Alberta, Canada were investigated as part of a 2014 passive in-situ bioindicator source apportionment study. Epiphytic lichen species Hypogymnia physodes samples (n = 127) were collected within a 150 km radius of the main surface oil sand production operations and analyzed for total sulfur, total nitrogen, forty-three elements, twenty-two PAHs, ten groups of C1-C2-alkyl PAHs and dibenzothiophenes (polycyclic aromatic compounds; PACs), five C1- and C2-alkyldibenzothiophenes, and retene. The ΣPAH + PAC in H. physodes ranged from 54 to 2778 ng g^-1 with a median concentration of 317 ng g^-1. Source apportionment modeling found an eight-factor solution that explained 99% of the measured ΣPAH + PAC lichen concentrations from four anthropogenic oil sands production sources (Petroleum Coke, Haul Road Dust, Stack Emissions, Raw Oil Sand), two local/regional sources (Biomass Combustion, Mobile Source), and two lichen biogeochemical factors. Petroleum Coke and Raw Oil Sand dust were identified as the major contributing sources of ΣPAH + PAC in the AOSR. These two sources accounted for 63% (43.2 μg g^-1) of ΣPAH + PAC deposition to the entire study domain. Of this overall 43.2 μg g^-1 contribution, approximately 90% (39.9 μg g^-1) ΣPAH + PAC was deposited within 25 km of the closest oil sand production facility. Regional sources (Biomass Combustion and Mobile Sources) accounted for 19% of ΣPAH + PAC deposition to the entire study domain, of which 46% was deposited near-field to oil sand production operations. Source identification was improved over a prior lichen-based study in the AOSR through incorporation of PAH and PAC analytes in addition to inorganic analytes.

Silica-based magnetic hybrid nanocomposite for the extraction and preconcentration of some organophosphorus pesticides before gas chromatography

The precise control of pesticide residues in foodstuffs depends significantly on the clean extraction of analytes using specifically designed separation methods. In this study, a one-pot sol-gel process was used for the preparation of a magnetic hybrid silica gel tetraethylortho silicate-cyanopropyltriethoxy silane nanocomposite. The prepared material was characterized using energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, single-point specific surface area, and scanning electron microcopy. The synthesized magnetic hybrid material was used as a solid phase extraction sorbent for the extraction and preconcentration of some organophosphorus pesticides before gas chromatography with a microelectron capture detector. The performance of the proposed magnetic solid-phase extraction technique was validated by linearity (0.05-2 ng/mL), correlation coefficients (r²  = 0.9993-0.9997), limit of detection (0.02-0.06 ng/mL, S/N = 3, n = 3), and intraday (RSD = 1.5-8.7%, n = 3) and interday precision (RSD = 5.5-9.3%, n = 12), while the recovery in real samples and equilibrium adsorption capacity was 72.02-103.84% and 8-20 mg/g, respectively. The magnetic solid-phase extraction based on the hybrid nanocomposite revealed a high enrichment factor, an appropriate dynamic range, and great absorptive ability toward the selected organophosphorus pesticides spiked in real water samples.

Occurrence and toxicological assessment of polycyclic aromatic hydrocarbons (PAHs) in marine sediments under mussel farming influence

The use of marine resources for mussel culture has become increasingly important, particularly on the European Atlantic coast and notably in the Galician Rías in the northwest of Spain. Despite its importance, there is a lack of research and analysis in this area and of the potential problems that it could cause to the environment. This paper details the findings of a study that aimed to find the probable environmental impact of mussel culture activities and to evaluate the polycyclic aromatic hydrocarbon (PAH) content derived from this activity. The Ría de Arousa, where you can find over 70% of all installed rafts in Galicia, was selected for the present study, and nearly 40 marine sediment samples were collected there. The sediments were extracted by ASE (accelerated solvent extraction) procedure, and the quantification of PAHs was performed using gas chromatography coupled to mass spectrometry (GC-MS), with the aid of deuterated PAH internal standards. The total concentration of parental PAHs ranged from 11.66 to 30,272-ng g^-1 dry weight (d.w.), with a mean value of 3907-ng g^-1 d.w.; the concentration of alkyl PAHs varied from 3.72 to 1187-ng g^-1 d.w., with a mean value of 205.1-ng g^-1 d.w. Compositional patterns, principal component analysis (PCA) and hieratical cluster association (HCA) yielded a sediment classification where the mussel raft impact is pointed out. PAH ratios indicated a predominance of combustion sources, except in two samples, located in small harbors. Only one station showed total potential carcinogenic PAH values in the range that would frequently cause negative biological effects, and the toxic equivalent concentrations based on BaP equivalents identified another ten positions where biological effects would occur occasionally.

Influence of biochar and compost on phytoremediation of oil-contaminated soil

The use of pyrolyzed carbon, biochar, as a soil amendment is of potential interest for improving phytoremediation of soil that has been contaminated by petroleum hydrocarbons. To examine this question, the research reported here compared the effects of biochar, plants (mesquite tree seedlings), compost and combinations of these treatments on the rate of biodegradation of oil in a contaminated soil and the population size of oil-degrading bacteria. The presence of mesquite plants significantly enhanced oil degradation in all treatments except when biochar was used as the sole amendment without compost. The greatest extent of oil degradation was achieved in soil planted with mesquite and amended with compost (44% of the light hydrocarbon fraction). Most probable number assays showed that biochar generally reduced the population size of the oil-degrading community. The results of this study suggest that biochar addition to petroleum-contaminated soils does not improve the rate of bioremediation. In contrast, the use of plants and compost additions to soil are confirmed as important bioremediation technologies.

Chemical fingerprinting of naphthenic acids and oil sands process waters-A review of analytical methods for environmental samples

This article provides a review of the routine methods currently utilized for total naphthenic acid analyses. There is a growing need to develop chemical methods that can selectively distinguish compounds found within industrially derived oil sands process affected waters (OSPW) from those derived from the natural weathering of oil sands deposits. Attention is thus given to the characterization of other OSPW components such as oil sands polar organic compounds, PAHs, and heavy metals along with characterization of chemical additives such as polyacrylamide polymers and trace levels of boron species. Environmental samples discussed cover the following matrices: OSPW containments, on-lease interceptor well systems, on- and off-lease groundwater, and river and lake surface waters. There are diverse ranges of methods available for analyses of total naphthenic acids. However, there is a need for inter-laboratory studies to compare their accuracy and precision for routine analyses. Recent advances in high- and medium-resolution mass spectrometry, concomitant with comprehensive mass spectrometry techniques following multi-dimensional chromatography or ion-mobility separations, have allowed for the speciation of monocarboxylic naphthenic acids along with a wide range of other species including humics. The distributions of oil sands polar organic compounds, particularly the sulphur containing species (i.e., OxS and OxS2) may allow for distinguishing sources of OSPW. The ratios of oxygen- (i.e., Ox) and nitrogen-containing species (i.e., NOx, and N2Ox) are useful for differentiating organic components derived from OSPW from natural components found within receiving waters. Synchronous fluorescence spectroscopy also provides a powerful screening technique capable of quickly detecting the presence of aromatic organic acids contained within oil sands naphthenic acid mixtures. Synchronous fluorescence spectroscopy provides diagnostic profiles for OSPW and potentially impacted groundwater that can be compared against reference groundwater and surface water samples. Novel applications of X-ray absorption near edge spectroscopy (XANES) are emerging for speciation of sulphur-containing species (both organic and inorganic components) as well as industrially derived boron-containing species. There is strong potential for an environmental forensics application of XANES for chemical fingerprinting of weathered sulphur-containing species and industrial additives in OSPW.