Relating nanomaterial properties and microbial toxicity

Engineering of bespoke photosensitiser-microbe interfaces for enhanced semi-artificial photosynthesis

Biohybrid systems for solar fuel production integrate artificial light-harvesting materials with biological catalysts such as microbes. In this perspective, we discuss the rational design of the abiotic-biotic interface in biohybrid systems by reviewing microbes and synthetic light-harvesting materials, as well as presenting various approaches to coupling these two components together. To maximise performance and scalability of such semi-artificial systems, we emphasise that the interfacial design requires consideration of two important aspects: attachment and electron transfer. It is our perspective that rational design of this photosensitiser-microbe interface is required for scalable solar fuel production. The design and assembly of a biohybrid with a well-defined electron transfer pathway allows mechanistic characterisation and optimisation for maximum efficiency. Introduction of additional catalysts to the system can close the redox cycle, omitting the need for sacrificial electron donors. Studies that electronically couple light-harvesters to well-defined biological entities, such as emerging photosensitiser-enzyme hybrids, provide valuable knowledge for the strategic design of whole-cell biohybrids. Exploring the interactions between light-harvesters and redox proteins can guide coupling strategies when translated into larger, more complex microbial systems.

Global analysis of the perturbation effects of metal-based nanoparticles on soil nitrogen cycling

Although studies have investigated the effects of metal-based nanoparticles (MNPs) on soil biogeochemical processes, the results obtained thus far are highly variable. Moreover, we do not yet understand how the impact of MNPs is affected by experimental design and environmental conditions. Herein, we conducted a global analysis to synthesize the effects of MNPs on 17 variables associated with soil nitrogen (N) cycling from 62 studies. Our results showed that MNPs generally exerted inhibitory effects on N-cycling process rates, N-related enzyme activities, and microbial variables. The response of soil N cycling varied with MNP type, and exposure dose was the most decisive factor for the variations in the responses of N-cycling process rates and enzyme activities. Notably, Ag/Ag2 S and CuO had dose-dependent inhibitory effects on ammonia oxidation rates, while CuO and Zn/ZnO showed hormetic effects on nitrification and denitrification rates, respectively. Other experimental design factors (e.g., MNP size and exposure duration) also regulated the effect of MNPs on soil N cycling, and specific MNPs, such as Ag/Ag2 S, exerted stronger effects during long-term (>28 days) exposure. Environmental conditions, including soil pH, organic carbon, texture, and presence/absence of plants, significantly influenced MNP toxicity. For instance, the effects of Ag/Ag2 S on the ammonia oxidation rate and the activity of leucine aminopeptidase were more potent in acid (pH <6), organic matter-limited (organic carbon content ≤10 g kg-1 ), and coarser soils. Overall, these results provide new insights into the general mechanisms by which MNPs alter soil N processes in different environments and underscore the urgent need to perform multivariate and long-term in situ trials in simulated natural environments.

Exploration and Evaluation of Secondary Metabolites from Trichoderma harzianum: GC-MS Analysis, Phytochemical Profiling, Antifungal and Antioxidant Activity Assessment

In this study, we investigated in vitro the potential of Trichoderma harzianum to produce bioactive secondary metabolites that can be used as alternatives to synthetic compounds. The study focused on analyzing two extracts of T. harzianum using ethyl acetate and n-butanol solvents with different polarities. The extracts were examined using phytochemical analysis to determine the content of polyphenols, flavonoids, tannins, and alkaloids. Thin-layer chromatography (TLC) and Gas chromatography-mass spectroscopy (GC-MS) analysis were used to profile volatile organic metabolites (VOCs) present in the extracts. Furthermore, the extracts were tested for their antifungal ability using the poison food technique. For measuring antioxidant activity, the 1,1-diphenyl-2-picryl-hydrazyl (DPPH) test was used. Trichoderma harzianum was shown to have a significantly high content of tannins and alkaloids, with a noticeable difference between the two extracts. GC-MS analysis identified 33 potential compounds with numerous benefits that could be used in agriculture and the medicinal industry. Moreover, strong antifungal activity was identified against Sclerotinia sclerotiorum by 94.44%, Alternaria sp. by 77.04%, and Fusarium solani by 51.48; similarly, the IC₅₀ of antioxidant activity was estimated for ethyl acetate extract by 71.47% and n-butanol extract by 56.01%. This leads to the conclusion that Trichoderma harzianum VOCs play a significant role as an antifungal and antioxidant agent when taking into account the advantageous bioactive chemicals noted in the extracts. However, to our knowledge, this is the first study in Algeria presenting detailed phytochemical analysis and GC-MS profiling of Trichoderma harzianum for two extracts, ethyl acetate and n-butanol.

Nanotechnology: A promising strategy for the control of parasitic infections

Annually 3.5 billion people are affected by the parasitic infections that results around 200,000 deaths per annum. Major diseases occur due to the neglected tropical parasites. Variety of methods have been used to treat the parasitic infections but now these methods have become ineffective due to the development of resistance in the parasites and some other side effects of traditional treatment methods. Previous methods include use of chemotherapeutic agents and ethnobotanicals for the treatment of parasites. Parasites have developed resistance against the chemotherapeutic agents. A major problem related to Ethnobotanicals is the unequal availability of drug at the target site which is responsible for the low efficacy of drug. Nanotechnology technology involves the manipulation of matter on a nanoscale level and has the potential to enhance the efficacy and safety of existing drugs, develop new treatments, and improve diagnostic methods for parasitic infections. Nanoparticles can be designed to selectively target parasites while minimizing toxicity to the host, and they can also be used to improve drug delivery and increase drug stability. Some important nanotechnology-based tools for parasitic control include nanoparticle-based drug delivery, nanoparticle diagnostics, nanoparticle vaccines, nanoparticle insecticides. Nanotechnology has the potential to revolutionize the field of parasitic control by providing new methods for detection, prevention and treatment of parasitic infections. This review discusses the current state of nanotechnology-based approaches for controlling parasitic infections and highlights their potential to revolutionize the field of parasitology.

microRNA Detection via Nanostructured Biochips for Early Cancer Diagnostics

MicroRNA (miRNA) are constituted of approximately 22 nucleotides and play an important role in the regulation of many physiological functions and diseases. In the last 10 years, an increasing interest has been recorded in studying the expression profile of miRNAs in cancer. Real time-quantitative polymerase chain reaction (RT-qPCR), microarrays, and small RNA sequencing represent the gold standard techniques used in the last 30 years as detection methods. The advent of nanotechnology has allowed the fabrication of nanostructured biosensors which are widely exploited in the diagnostic field. Nanostructured biosensors offer many advantages: (i) their small size allows the construction of portable, wearable, and low-cost products; (ii) the large surface-volume ratio enables the loading of a great number of biorecognition elements (e.g., probes, receptors); and (iii) direct contact of the recognition element with the analyte increases the sensitivity and specificity inducing low limits of detection (LOD). In this review, the role of nanostructured biosensors in miRNA detection is explored, focusing on electrochemical and optical sensing. In particular, four types of nanomaterials (metallic nanoparticles, graphene oxide, quantum dots, and nanostructured polymers) are reported for both detection strategies with the aim to show their distinct properties and applications.

Analytical methods for assessing antimicrobial activity of nanomaterials in complex media: advances, challenges, and perspectives

Assessing the antimicrobial activity of engineered nanomaterials (ENMs), especially in realistic scenarios, is of great significance for both basic research and applications. Multiple analytical methods are available for analysis via off-line or on-line measurements. Real-world samples are often complex with inorganic and organic components, which complicates the measurements of microbial viability and/or metabolic activity. This article highlights the recent advances achieved in analytical methods including typical applications and specifics regarding their accuracy, cost, efficiency, and user-friendliness. Methodological drawbacks, technique gaps, and future perspectives are also discussed. This review aims to help researchers select suitable methods for gaining insight into antimicrobial activities of targeted ENMs in artificial and natural complex matrices.

Fighting Phytopathogens with Engineered Inorganic-Based Nanoparticles

The development of effective and ecofriendly agrochemicals, including bactericides, fungicides, insecticides, and nematicides, to control pests and prevent plant diseases remains a key challenge. Nanotechnology has provided opportunities for the use of nanomaterials as components in the development of anti-phytopathogenic agents. Indeed, inorganic-based nanoparticles (INPs) are among the promising ones. They may play an effective role in targeting and killing microbes via diverse mechanisms, such as deposition on the microbe surface, destabilization of cell walls and membranes by released metal ions, and the induction of a toxic mechanism mediated by the production of reactive oxygen species. Considering the lack of new agrochemicals with novel mechanisms of action, it is of particular interest to determine and precisely depict which types of INPs are able to induce antimicrobial activity with no phytotoxicity effects, and which microbe species are affected. Therefore, this review aims to provide an update on the latest advances in research focusing on the study of several types of engineered INPs, that are well characterized (size, shape, composition, and surface features) and show promising reactivity against assorted species (bacteria, fungus, virus). Since effective strategies for plant protection and plant disease management are urgently needed, INPs can be an excellent alternative to chemical agrochemical agents as indicated by the present studies.

Sustainable Bioengineering of Gold Structured Wide-Area Supported Catalysts for Hand-Recyclable Ultra-Efficient Heterogeneous Catalysis

Metal nanoparticles grafted within inert and porous wide-area supports are emerging as recyclable, sustainable catalysts for modern industry applications. Here, we bioengineered gold nanoparticle-based supported catalysts by utilizing the innate metal binding and reductive potential of eggshell as a sustainable strategy. Variable hand-recyclable wide-area three-dimensional catalysts between ∼80 ± 7 and 0.5 ± 0.1 cm² are generated simply by controlling the size of the support. The catalyst possessed high-temperature stability (300 °C) and compatibility toward polar and nonpolar solvents, electrolytes, acids, and bases facilitating ultra-efficient catalysis of accordingly suspended substrates. Validation was done by large-volume (2.8 liters) dye detoxification, gram-scale hydrogenation of nitroarene, and the synthesis of propargylamine. Moreover, persistent recyclability, monitoring of reaction kinetics, and product intermediates are possible due to physical retrievability and interchangeability of the catalyst. Finally, the bionature of the support permits ∼76.9 ± 8% recovery of noble gold simply by immersing in a royal solution. Our naturally created, low-cost, scalable, hand-recyclable, and resilient supported mega-catalyst dwarfs most challenges for large-scale metal-based heterogeneous catalysis.

Nano-pollution: Why it should worry us

Nanoparticles are immensely diverse both in terms of quality and sources of emission into the environment. Nowadays, nanotechnologies are developing and growing at a rapid pace without specific rules and regulations, leading to a severe effect on environment and affecting the labours in outdoor and indoor workplaces. The continue and enormous use of NPs for industrial and commercial purposes, has put a pressing need to think whether the increasing use of these NPs could overcome the severe environmental effects and unknown human health risks. Only a few studies have been carried out to assess the toxic effect of these NPs resulting from their direct or indirect exposure. There is in an increasing clamour to consider environmental implications of NPs and to monitor the outcome of NP during use in biological testing. There remain many open questions for consideration. An adequate research is required to determine the real toxic effect of these NPs on environment and human health. In this review, we have discussed the negative effects of NPs on environment and biosphere at large and the future research required.

Preparation, characterization and food packaging application of nano ZnO@Xylan/quaternized xylan/polyvinyl alcohol composite films

Xylan could be considered as a good potential candidate for food packaging film because of the vast source and biodegradability, however, its application was restricted by the drawbacks of poor film-forming property, humidity sensitivity, weak mechanical strength and poor antibacterial property. In this paper, xylan was firstly modified by quaternization to improve the film-forming property, then ZnO nanoparticles encapsulated by xylan (nano ZnO@Xylan) was prepared by nanoprecipitation method, finally a series of biodegradable composite films were prepared using quaternized xylan and polyvinyl alcohol with incorporation of nano ZnO@Xylan. The surface morphology, molecular structure and crystallography structure of the films were characterized. The addition of nano ZnO@Xylan decreased water vapor permeability and solubility, meanwhile obviously increased the ultraviolet shielding performance as well as the antibacterial properties of the films. The bacteriostasis rate of the films against E. coli and S. aureus reached up to 99 %. Furthermore, the preservation time of cherry tomatoes covered with ZnO@Xylan/QX/PVA films was extended to at least 21 days. In conclusion, all the results ensure that the fabricated composite films have considerable promising application in the food packaging industry.

Nanoparticles: Synthesis and Their Role as Potential Drug Candidates for the Treatment of Parasitic Diseases

Protozoa, helminths and ectoparasites are the major groups of parasites distributed worldwide. Currently, these parasites are treated with chemotherapeutic antiprotozoal drugs, anti-helminthic and anti-ectoparasitic agents, but, with the passage of time, resistance to these drugs has developed due to overuse. In this scenario, nanoparticles are proving to be a major breakthrough in the treatment and control of parasitic diseases. In the last decade, there has been enormous development in the field of nanomedicine for parasitic control. Gold and silver nanoparticles have shown promising results in the treatments of various types of parasitic infections. These nanoparticles are synthesized through the use of various conventional and molecular technologies and have shown great efficacy. They work in different ways, that include damaging the parasite membrane, DNA (Deoxyribonucleic acid) disruption, protein synthesis inhibition and free-radical formation. These agents are effective against intracellular parasites as well. Other nanoparticles, such as iron, nickel, zinc and platinum, have also shown good results in the treatment and control of parasitic infections. It is hoped that this research subject will become the future of modern drug development. This review summarizes the methods that are used to synthesize nanoparticles and their possible mechanisms of action against parasites.

Combatting persisted and biofilm antimicrobial resistant bacterial by using nanoparticles

Some bacteria can withstand the existence of an antibiotic without undergoing any genetic changes. They are neither cysts nor spores and are one of the causes of disease recurrence, accounting for about 1% of the biofilm. There are numerous approaches to eradication and combating biofilm-forming organisms. Nanotechnology is one of them, and it has shown promising results against persister cells. In the review, we go over the persister cell and biofilm in extensive detail. This includes the biofilm formation cycle, antibiotic resistance, and treatment with various nanoparticles. Furthermore, the gene-level mechanism of persister cell formation and its therapeutic interventions with nanoparticles were discussed.

Effects of copper oxide nanoparticles on Salix growth, soil enzyme activity and microbial community composition in a wetland mesocosm

A model wetland with Salix was established to investigate the effects of CuO nanoparticles (NPs; the equivalent amount of Cu at 0, 100 and 500 mg/kg) on plant, soil enzyme activity and microbial community. Ionic Cu (100, 500 mg/kg) and bulk-sized CuO particles (BPs, 500 mg/kg) were included as controls. The results suggested the CuO NPs at 500 mg/kg and ionic Cu treatments inhibited the plant growth, while CuO NPs at 100 mg/kg and CuO BPs at 500 mg/kg played a facilitating role. CuO NPs significantly decreased the activities of peroxidase and polyphenol oxidase, while ionic Cu treatments increased peroxidase activity, BPs and ionic Cu (500 mg/kg) increased the polyphenol oxidase activity. Bacterial community richness and diversity were reduced in all Cu treatments; however, CuO NPs and BPs at 500 mg/kg significantly increased the richness and diversity of fungal community.Soil microbial community was significantly altered by Cu types and dose. In comparison with ionic Cu and CuO BPs, CuO NPs uniquely enriched the microbial community and the fungal families.Overall, it demonstrate that both particle size and dose regulate the impact of CuO on wetland ecology, which deepens our understanding on the ecological risks of CuO NPs in freshwater forested wetland.

Nanowaste: Another Future Waste, Its Sources, Release Mechanism, and Removal Strategies in the Environment

Nanowaste is defined as waste derived from materials with at least one dimension in the 1–100 nm range. The nanomaterials containing products are considered as “nanoproducts” and they can lead to the development of nanomaterial-containing waste, also termed as “nanowaste”. The increased production and consumption of these engineered nanomaterials (ENMs) and nanoproducts that generate enormous amounts of nanowaste have raised serious concerns about their fate, behavior, and ultimate disposal in the environment. It is of the utmost importance that nanowaste is disposed of in an appropriate manner to avoid an adverse impact on human health and the environment. The unique properties of ENMs, combined with an inadequate understanding of appropriate treatment techniques for many forms of nanowaste, makes nanowaste disposal a complex task. Presently, there is a lack of available information on the optimized standards for identifying, monitoring, and managing nanowaste. Therefore, this review highlights concerns about nanowaste as future waste that need to be addressed. The review focuses on ENMs waste (in the form of NP, nanotubes, nanowires, and quantum dots) generated from the manufacture of a wide variety of nanoproducts that end up as nanowaste and adversely affect the environment. Furthermore, the review considers different types of ENMs in waste streams and environmental compartments (i.e., soil, water, and air). Detailed studies are still required to identify data gaps and implement strategies to remove and control this future waste.

Polyphenol effects on CuO-nanoparticle-mediated DNA damage, reactive oxygen species generation, and fibroblast cell death

The ability of ten polyphenolic antioxidants to prevent CuO nanoparticle (NPCuO) and H2O2-mediated DNA damage and cytotoxicity was investigated. Five of the polyphenols (MEPCA, PREGA, MEGA, ECG, and EGCG) prevent NPCuO/H2O2-mediated DNA damage (IC50 values of 7.5-800 μM), three have no effect (PCA, VA, and EC), and two (GA and EGC) result in increased DNA damage. Most polyphenols had similar antioxidant/prooxidant activity in the presence of NPCuO or free copper ions. Electron paramagnetic resonance (EPR) spectroscopy of reactive oxygen species (ROS) generated by NPCuO/H2O2 in the presence of representative polyphenols correlate with results of DNA damage studies: in the presence of NPCuO/H2O2, MEPCA prevents ROS formation, VA has no effect on ROS levels, and EGC increases ROS levels. EPR results with CuO nanoparticles washed to remove dissolved copper in solution (wCuO) in the presence of H2O2/ascorbate suggest that MEPCA prevents ROS formation on the nanoparticle surface in addition to preventing ROS formation from dissolved copper. In mouse fibroblast (L929) cells, combining NPCuO with H2O2 results in significantly greater cytotoxicity than observed for either component alone. After 3 h incubation with MEPCA or MEGA, the viability loss in L929 cells induced by NPCuO/H2O2 challenge was significantly rescued at physiologically relevant polyphenol levels (1 μM). These studies show that polyphenols can protect DNA and inhibit cytotoxicity generated by NPCuO under oxidative stress conditions.

Responses of bacterial communities and antibiotic resistance genes to nano-cellulose addition during pig manure composting

Treatment with exogenous additives during composting can help to alleviate the accumulation of antibiotic resistance genes (ARGs) caused by the direct application of pig manure to farmland. In addition, nano-cellulose has an excellent capacity for adsorbing pollutants. Thus, the effects of adding 300, 600, and 900 mg/kg nano-cellulose to compost on the bacterial communities, mobile genetic elements (MGEs), and ARGs were determined in this study. After composting, treatment with nano-cellulose significantly reduced the relative abundance of ARGs, which was lowest in the compost product with 600 mg/kg added nano-cellulose. Nano-cellulose inhibited the rebound in ARGs from the cooling period to the maturity period, and weakened the selective pressure of heavy metals on microorganisms by passivating bio-Cu. The results also showed that MGEs explained most of the changes in the abundances of ARGs, and MGEs had direct effects on ARGs. The addition of 600 mg/kg nano-cellulose reduced the abundances of bacterial genera associated with ermQ, tetG, and other genes, and the number of links (16) between ARGs and MGEs was lowest in the treatment with 600 mg/kg added nano-cellulose. Therefore, adding 600 mg/kg nano-cellulose reduced the abundances of ARGs by affecting host bacteria and MGEs. The results obtained in this study demonstrate the positive effect of nano-cellulose on ARG pollution in poultry manure, where adding 600 mg/kg nano-cellulose was most effective at reducing the abundances of ARGs.

Nanomagnet-facilitated pharmaco-compatibility for cancer diagnostics: Underlying risks and the emergence of ultrasmall nanomagnets

Cancer therapy is a fast-emerging biomedical paradigm that elevates the diagnostic and therapeutic potential of a nanovector for identification, monitoring, targeting, and post-treatment response analysis. Nanovectors of superparamagnetic iron oxide nanoparticles (SPION) are of tremendous significance in cancer therapy because of their inherited high surface area, high reactivity, biocompatibility, superior contrast, and magnetic and photo-inducibility properties. In addition to a brief introduction, we summarize various progressive aspects of nanomagnets pertaining to their production with an emphasis on sustainable biomimetic approaches. Post-synthesis particulate and surface alterations in terms of pharmaco-affinity, liquid accessibility, and biocompatibility to facilitate cancer therapy are highlighted. SPION parameters including particle contrast, core-fusions, surface area, reactivity, photosensitivity, photodynamics, and photothermal properties, which facilitate diverse cancer diagnostics, are discussed. We also elaborate on the concept of magnetism to selectively focus chemotherapeutics on tumors, cell sorting, purification of bioentities, and elimination of toxins. Finally, while addressing the toxicity of nanomaterials, the advent of ultrasmall nanomagnets as a healthier alternative with superior properties and compatible cellular interactions is reviewed. In summary, these discussions spotlight the versatility and integration of multi-tasking nanomagnets and ultrasmall nanomagnets for diverse cancer theragnostics.

•

SPION synthesis with ascribed prominence on sustainable procedures.

•

Particulate species, composition, and surface alteration-enabled theragnostics are highlighted.

•

Inherent properties of SPIONs facilitating cancer diagnostics are elaborated.

•

Magnetism-based “chemotherapeutics,” cell-sorting, and bioentity purification are emphasized.

•

Emergence of ultrasmall SPIONs as a healthier option is summarized.

Rapid bacterial elimination achieved by sonodynamic Au@Cu2O hybrid nanocubes

Although efforts have been devoted to develop new antibacterial agents and techniques, the challenge of bacterial infection remains unresolved and is even increasing. Sonodynamic therapy (SDT) driven by ultrasound (US) has demonstrated effectiveness in terms of penetration and it can help to clinically address the problem of deep tissue bacterial infection. In recent years, a variety of sonosensitizers, which were originally designed for photodynamic therapy, have been adopted for SDT. Yet, their unstable chemical stability and ineffective electron-hole separation are not favorable for clinical applications. Hence, we designed a new type of antibacterial sonosensitizer-namely, Au@Cu₂O hybrid nanocubes-in which an interfacial Schottky junction was built between a p-type semiconductor Cu₂O and a noble metal Au. When US stimulation was applied, the electrons from Cu₂O could be excited at the junction and transferred to Au. Since the formed Schottky barrier could block the backflow of US-excited electrons, a prolonged electron-hole separation can be successfully established. Additionally, because of the boosted sonocatalytic activity, the Au@Cu₂O hybrid nanocubes could produce a large amount of reactive oxygen species (ROS), which are subject to US stimulation. Furthermore, we found that the sonocatalytic activity of the Au@Cu₂O hybrid nanocubes could be reinforced by increasing the amount of Au, enabling 99.67% of Staphylococcus aureus (S. aureus) to be killed by US stimulation for 15 minutes. The cytocompatibility of Au@Cu₂O hybrid nanocubes was improved by a red blood cell membrane (RBC) coating over the surface, and the membrane did not sacrifice its superior antibacterial properties.

Copper/Carbon Core/Shell Nanoparticles: A Potential Material to Control the Fish Pathogen Saprolegnia parasitica

Copper-based fungicides have a long history of usage in agriculture and aquaculture. With the rapid development of metal-based nanoparticles, copper-based nanoparticles have attracted attention as a potential material for prevention and control of Saprolegnia parasitica. The present study investigated the effectiveness of copper/carbon core/shell nanoparticles (CCCSNs) and a commercial CCCSNs filter product (COPPERWARE®) against S. parasitica in a recirculating system. Results showed that the growth of agar plugs with mycelium was significantly suppressed after exposure to both CCCSNs powder and COPPERWARE® filters. Even the lowest concentration of CCCSNs used in our study (i.e., 100 mg/mL) exhibited significant inhibitory effects on S. parasitica. The smallest quantity of the filter product COPPERWARE® (3.75 × 3.7 × 1.2 cm, 2.58 g) used in our aquarium study also demonstrated significant inhibition compared with the control group. However, we observed leaching of copper into the water especially when larger quantities of COPPERWARE® were used. Water turbidity issues were also observed in tanks with the filter material. Besides these issues, which should be further investigated if the product is to be used on aquatic species sensitive to copper, CCCSNs has promising potential for water disinfection.

A universal automated method for determining the bacteriostatic activity of nanomaterials

The lack of analytical strategies to directly determine the bacteriostatic activity of nanomaterials in complex aqueous media (e.g., environmentally relevant scenarios) seriously hampers the harvest of reliable data for nanomaterial risk assessment. Here, we created an automated phenotypic method based on a developed multi-channel contactless conductometric sensor. Bacterial growth kinetics of E. coli and S. aureus were determined via on-line monitoring of conductivity changes in simple media (e.g., liquid LB broth) and complex media (e.g., relevant river water and seawater samples with diverse pH, salinity, conductivity, turbidity, chemical oxygen demand and total suspended solids). The high temporal resolution growth curves provide detailed information on the bacteria inhibition of the model nanomaterial - Au nanospheres, Au nanorods, Ag nanospheres and Ag nanocubes - at each growth stage, thus enabling users to directly obtain minimum inhibitory concentrations. The method highlights the advantages of universality, simplicity and affordability. It opens up possibilities for the development of a powerful analytical platform for researches in the field of nanoscience, e.g. to assess ecotoxicity of nanomaterials.

Fenton-like reaction driving the degradation and uptake of multi-walled carbon nanotubes mediated by bacterium

Carbon nanotubes (CNTs) have been widely studied because of their potential applications. The increasing applications of CNTs and less known of their environmental fates rise concerns about their safety. In this study, the biotransformation of multi-walled carbon nanotubes (MWCNTs) by Labrys sp. WJW was investigated. Within 16 days, qPCR analysis showed that cell numbers increased 4.92 ± 0.36 folds using 100 mg/L MWCNTs as the sole carbon source. The biotransformation of MWCNTs, which led to morphology and functional group change, was evidenced by transmission electron microscopy and X-ray photoelectron spectroscopy analyses. Raman spectra illustrated that more defects and disordered carbon appeared on MWCNTs during incubation. The underlying biotransformation mechanism of MWCNTs through an extracellular bacterial Fenton-like reaction was demonstrated. In this bacteria-mediated reaction, the OH production was induced by reduction of H₂O₂ involved a continuous cycle of Fe(II)/Fe(III). Bacterial biotransformation of MWCNTs will provide new insights into the understanding of CNTs bioremediation processes.

Expatiating the impact of anthropogenic aspects and climatic factors on long-term soil monitoring and management

This article is an extensive collection of scientific literature related to the impact of fertilizers on soil microbial and enzymatic activity. Due to the significance of technology in quantitative and qualitative evaluation of agricultural production, this is a basic problem for the present and future of mankind, where the scientific data being of utmost importance related to the topic. The comparison, including pedo-enzymological evaluation of minerals along with organic fertilization, highlights significant differences between mineral and organic fertilizers, confirming the superiority of complex mineral-organic fertilization. Enzymatic indicators that describe and define the soil quality resulted from enzymatic activities value and provide valuable information regarding the soil fertility status. Moreover, soil enzyme responds to soil management as well as to environmental pollutants. Changes of environmental conditions and pollutants like heavy metals and other toxic substances result in a shift in the biological activity of the soil. These changes can destabilize the soil system and cause a decrease in the nutrient pools. To ensure the improvement of fertilization techniques, the properties of nanoparticles are exploited that can efficiently release nutrients to plant cells. Numerous researches were performed in order to follow the long-term effects of incorporating nanofertilizers into the soil, obtaining an exhaustive overview of this new technology over the development of sustainable agriculture.

Antibacterial Assessment of Zinc Sulfide Nanoparticles against Streptococcus pyogenes and Acinetobacter baumannii

BACKGROUND

Due to the appearance of resistant bacterial strains against the antimicrobial drugs and the reduced efficiency of these valuable resources, the health of a community and the economies of countries have been threatened.

OBJECTIVE

In this study, the antibacterial assessment of zinc sulfide nanoparticles (ZnS NPs) against Streptococcus pyogenes and Acinetobacter baumannii has been performed.

METHODS

ZnS NPs were synthesized through a co-precipitation method using polyvinylpyrrolidone (PVP), polyvinyl alcohol (PVA) and polyethylene glycol (PEG-4000). The size and morphology of the synthesized ZnS NPs were determined by a scanning electron microscope (SEM) and it was found that the average size of the applied NPs was about 70 nm. In order to evaluate the antibacterial effect of the synthesized ZnS NPs, various concentrations (50μg/mL, 100 μg/mL and 150 μg/mL) of ZnS NPs were prepared. Antibacterial assessments were performed through the disc diffusion method in Mueller Hinton Agar (MHA) culture medium and also the optical density (OD) method was performed by a UV-Vis spectrophotometer in Trypticase™ Soy Broth (TSB) medium. Then, in order to compare the antibacterial effects of the applied NPs, several commercial antibiotics including penicillin, amikacin, ceftazidime and primaxin were used.

RESULTS

The achieved results indicated that the antibacterial effects of ZnS NPs had a direct relation along with the concentrations and the concentration of 150 μg/mL showed the highest antibacterial effect in comparison with others. In addition, the ZnS NPs were more effective on Acinetobacter baumannii.

CONCLUSION

The findings of this research suggest a novel approach against antibiotic resistance.

Pulling the Brakes on Fast and Furious Multiple Drug-Resistant (MDR) Bacteria

Life-threatening bacterial infections have been managed by antibiotics for years and have significantly improved the wellbeing and lifetime of humans. However, bacteria have always been one step ahead by inactivating the antimicrobial agent chemically or by producing certain enzymes. The alarming universal occurrence of multidrug-resistant (MDR) bacteria has compelled researchers to find alternative treatments for MDR infections. This is a menace where conventional chemotherapies are no longer promising, but several novel approaches could help. Our current review article discusses the novel approaches that can combat MDR bacteria: starting off with potential nanoparticles (NPs) that efficiently interact with microorganisms causing fatal changes in the morphology and structure of these cells; nanophotothermal therapy using inorganic NPs like AuNPs to destroy pathogenic bacterial cells; bacteriophage therapy against which bacteria develop less resistance; combination drugs that act on dissimilar targets in distinctive pathways; probiotics therapy by the secretion of antibacterial chemicals; blockage of quorum sensing signals stopping bacterial colonization, and vaccination against resistant bacterial strains along with virulence factors. All these techniques show us a promising future in the fight against MDR bacteria, which remains the greatest challenge in public health care.

Extraction of Graphene Nanostructures from Colocasia esculenta and Nelumbo nucifera Leaves and Surface Functionalization with Tin Oxide: Evaluation of Their Antibacterial Properties

Expeditious evolution of antimicrobial resistance in recent years has been identified as a growing concern by various health organizations around the world. Herein, facile and environmentally benign production of highly antibacterial carbonaceous nanomaterials from Colocasia esculenta and Nelumbo nucifera leaves is reported. After carbonization and oxidative treatment, smaller graphene domains are formed in Colocasia esculenta derivatives, whereas larger sheetlike structures are observed in the case of Nelumbo nucifera. Smaller particle size makes quantum confinement effects more prominent, as is evident in fine-tuning of the photoluminescence emission after each stage of treatment. The influence of precursor materials on the antibacterial properties of the nanosystems is also demonstrated. When microbiocidal activity was tested against model bacteria Pseudomonas aeruginosa, the nanocomposite derived from Colocasia esculenta leaves showed higher activity than the antibiotic drug clarithromycin (control) with a measured zone of inhibition of 40±0.5 mm. This is one of the highest values reported in comparison with plant-based carbon-silver nanosystems. Quantitative analysis revealed that the nanocomposite obtained from Colocasia esculenta leaves has antimicrobial efficacy equivalent to those of commercial antibiotic drugs and is able to eradicate bacteria at much lower concentrations than that obtained from Nelumbo nucifera leaves.

Nanotechnology in agriculture: Current status, challenges and future opportunities

Nanotechnology has shown promising potential to promote sustainable agriculture. This article reviews the recent developments on applications of nanotechnology in agriculture including crop production and protection with emphasis on nanofertilizers, nanopesticides, nanobiosensors and nano-enabled remediation strategies for contaminated soils. Nanomaterials play an important role regarding the fate, mobility and toxicity of soil pollutants and are essential part of different biotic and abiotic remediation strategies. Efficiency and fate of nanomaterials is strongly dictated by their properties and interactions with soil constituents which is also critically discussed in this review. Investigations into the remediation applications and fate of nanoparticles in soil remain scarce and are mostly limited to laboratory studies. Once entered in the soil system, nanomaterials may affect the soil quality and plant growth which is discussed in context of their effects on nutrient release in target soils, soil biota, soil organic matter and plant morphological and physiological responses. The mechanisms involved in uptake and translocation of nanomaterials within plants and associated defense mechanisms have also been discussed. Future research directions have been identified to promote the research into sustainable development of nano-enabled agriculture.

Quantum dot interactions with and toxicity to Shewanella oneidensis MR-1

Combining abiotic photosensitisers such as quantum dots (QDs) with non-photosynthetic bacteria presents an intriguing concept into the design of artificial photosynthetic organisms and solar-driven fuel production. Shewanella oneidensis MR-1 (MR-1) is a versatile bacterium concerning respiration, metabolism and biocatalysis, and is a promising organism for artificial photosynthesis as the bacterium's synthetic and catalytic ability provides a potential system for bacterial biohydrogen production. MR-1's hydrogenases are present in the periplasmatic space. It follows that for photoenergised electrons to reach these enzymes, QDs will need to be able to enter the periplasm, or electrons need to enter the periplasm via the Mtr pathway that is responsible for MR-1's extracellular electron transfer ability. As a step towards this goal, various QDs were tested for their photo-reducing potential, nanotoxicology and further for their interaction with MR-1. CdTe/CdS/TGA, CdTe/CdS/Cysteamine, a commercial, negatively charged CdTe and CuInS₂/ZnS/PMAL QDs were examined. The photoreduction potential of the QDs was confirmed by measuring their ability to photoreduce methyl viologen with different sacrificial electron donors. The commercial CdTe and CuInS₂/ZnS/PMAL QDs showed no toxicity towards MR-1 as evaluated by a colony-forming units method and a fluorescence viability assay. Only the commercial negatively charged CdTe QDs showed good interaction with MR-1. With transmission electron microscopy, QDs were observed both in the cytoplasm and periplasm. These results inform on the possibilities and bottlenecks when developing bionanotechnological systems for the photosynthetic production of biohydrogen by MR-1.

MoS2 nanoparticles induce behavioral alteration and oxidative stress mediated cellular toxicity in the social insect Oecophylla smaragdina (Asian weaver ant)

The study evaluates molybdenum disulfide (MoS₂) nanoparticles (NPs) induced oxidative stress during cellular toxicity in an invertebrate in vivo system, the weaver ant. The lethal concentration was checked and LC₅₀ was obtained as 50 µg/mL. Feeding assay and the photoluminescence activity confirmed the ingestion of MoS₂ NPs by the organism. Behavioral assays showed altered grooming behavior in the MoS₂ NP fed ants. A drastic decrease in the hemocyte count in the MoS₂ NP fed ants revealed the anti-proliferative role of MoS₂. This was further confirmed by 5-bromo-2'-deoxyuridine (BrdU) labeling assay. MoS₂ NPs induced apoptotic activity was also observed in the hemocytes by acridine orange/ethidium bromide (AO/EB) staining. The level of oxidative stress during cellular toxicity was observed. An increased reactive oxygen species (ROS) level was observed in the MoS₂ NP fed ants when compared to the control group. The increased activity of superoxide dismutase (SOD) and the lipid peroxidation (LPO) product were observed. While, the activities of catalase (CAT) and glutathione-s-transferase (GST) and the glutathione content (GSH) were decreased by MoS₂ NPs. The transcript levels of SODs, CAT and GST were up regulated in the treated group. Our results suggest that MoS₂ NPs induced oxidative stress mediates the cellular toxicity in the foragers of the weaver ant.

Metal-Based Nanostructures/PLGA Nanocomposites: Antimicrobial Activity, Cytotoxicity, and Their Biomedical Applications

Among the different synthetic polymers developed for biomedical applications, poly(lactic-co-glycolic acid) (PLGA) has attracted considerable attention because of its excellent biocompatibility and biodegradability. Nanocomposites based on PLGA and metal-based nanostructures (MNSs) have been employed extensively as an efficient strategy to improve the structural and functional properties of PLGA polymer. The MNSs have been used to impart new properties to PLGA, such as antimicrobial properties and labeling. In the present review, the different strategies available for the fabrication of MNS/PLGA nanocomposites and their applications in the biomedical field will be discussed, beginning with a description of the preparation routes, antimicrobial activity, and cytotoxicity concerns of MNS/PLGA nanocomposites. The biomedical applications of these nanocomposites, such as carriers and scaffolds in tissue regeneration and other therapies are subsequently reviewed. In addition, the potential advantages of using MNS/PLGA nanocomposites in treatment illnesses are analyzed based on in vitro and in vivo studies, to support the potential of these nanocomposites in future research in the biomedical field.

Effect of TiO2-nanoparticles on copper toxicity to bacteria: role of bacterial surface

The impact of titanium dioxide nanoparticles (nano-TiO₂) on the aquatic environment is an important issue due to their increasing application. Although nano-TiO₂ was reported to show an effect on heavy metal toxicity to aquatic organisms, the underlying mechanism is not well understood. In this study, two bacterial species (Bacillus thuringiensis (B. thuringiensis) and Bacillus megaterium (B. megaterium)) from sediment were selected to study the effects of nano-TiO₂ on copper toxicity. Nano-TiO₂ was found to inhibit the growth of B. thuringiensis and enhance the oxidative stress damage caused by copper, whereas these effects were not observed for B. megaterium. Transmission electron microscopy and flow cytometry showed that B. thuringiensis has stronger association ability to nano-TiO₂ than B. megaterium. The existence of the S-layer on the surface of B. thuringiensis might be the possible reason, leading to the difference in copper toxicity. This indicates that the characteristics of bacterial surfaces might be important to the toxicity responses of nanoparticles.

Different surface characteristics of bacteria, for example, S-layer or exopolysaccharides, might lead to different effects of nanomaterials on metal toxicity.

Complexation and fluorescence behavior of proflavin with chemically engineered amine capped carbon nanodots and its subsequent release into DNA environments

Amine capped carbon dots are prepared by pyrolysis of citric acid. Probable excited-state interactions between PF and CNDs have been studied. A controlled release of PF into ctDNA by CNDs shows their utility as an efficient drug delivery agent.

Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry

Failure of dental treatments is mainly due to the biofilm accumulated on the dental materials. Many investigations have been conducted on the advancements of antimicrobial dental materials. Polymeric and inorganic nanoscopical agents are capable of inhibiting microorganism proliferation. Applying them as fillers in dental materials can achieve enhanced microbicidal ability. The present review provides a broad overview on the state-of-the-art research in the field of antimicrobial fillers which have been adopted for incorporation into dental materials over the last 5 years. The antibacterial agents and applications are described, with the aim of providing information for future investigations. STATEMENT OF SIGNIFICANCE: Microbial infection is the primary cause of dental treatment failure. The present review provides an overview on the state-of-art in the field of antimicrobial nanoscopical or polymeric fillers that have been applied in dental materials. Trends in the biotechnological development of these antimicrobial fillers over the last 5 years are reviewed to provide a backdrop for further advancement in this field of research.

Toxicity of ZnO/TiO2 -conjugated carbon-based nanohybrids on the coastal marine alga Thalassiosira pseudonana

Increasing consumption of metal-oxide nanoparticles (NPs) and carbon-based nanomaterials has caused significant concern about their potential hazards in aquatic environments. The release of NPs into aquatic environments could result in adsorption of NPs on microorganisms. While metal-oxide NP-conjugated carbon-based nanohybrids (NHs) may exhibit enhanced toxicity toward microorganisms due to their large surface area and the generation of reactive oxygen species (ROS), there is a lack of information regarding the ecotoxicological effects of NHs on marine diatom algae, which are an indicator of marine pollution. Moreover, there is scant information on toxicity mechanisms of NHs on aquatic organisms. In this study, four NHs (ie, ZnO-conjugated graphene oxide [GO], ZnO-conjugated carbon nanotubes [CNTs], TiO₂ -conjugated GO, and TiO₂ -conjugated CNT) that were synthesized by a hydrothermal method were investigated for their toxicity effects on a Thalassiosira pseudonana marine diatom. The in vitro cellular viability and ROS formation employed at the concentration ranges of 50 and 100 mg/L of NHs over 72 hours revealed that ZnO-GO had the most negative effect on T. pseudonana. The primary mechanism identified was the generation of ROS and GO-induced dispersion that caused electrostatic repulsion, preventing aggregation, and an increase in surface areas of NHs. In contrast to GO-induced dispersion, large aggregates were observed in ZnO/TiO₂ -conjugated CNT-based NHs. The scanning electron microscopy images suggest that NHs covered algae cells and interacted with them (shading effects); this reduced light availability for photosynthesis. Detailed in vitro toxicity effects and mechanisms that cause high adverse acute toxicity on T. pseudonana were unveiled; this implied concerns about potential hazards of these mechanisms in aquatic ecosystems.

Recent Interventions for Nanotechnology Based Drug Products: Insights into the Regulatory Aspects

BACKGROUND

Nanotechnology has been one of the most prominent forefront grounds in several traditional research areas of science and technology, and development of medicines at nanoscale can be reflected by the tremendous surge in market interest. Present outlook: Its applications include various research areas of medicine, drug delivery technology, diagnostic devices, tissue engineering and gene therapy. Along with immense advances, this technology comes with major limitations including potential immune reactivity and complex characterization of these products. Regulatory challenges: The lack of a proper regulatory perspective due to infidelities in scientific findings have led to further uncertainties and vagueness of the nanoscale domain, particularly its safety implications. Guideline scenario: Early development pathways and regulations should be a top-notch priority to help researchers fail faster and more economically. This would facilitate the peaking utility of these materials in medicine without compromising public health and environmental integrity. This review attempts to emphasize the regulatory rationales of key considerations in nanotechnology along with a portray of the present scenario.

Structural transformation and potential toxicity of iron-based deposits in drinking water distribution systems

Discoloration events in drinking water distribution systems (DWDSs) are usually considered an aesthetic issue rather than a health concern, and the potential toxicity of the iron-based particles resuspended from deposits in DWDSs has not been a focus. More importantly, it has not been recognized that the iron-based particles may have structural transformation under the complex condition in DWDSs which would further increase their adverse effects. In the present study, iron particle-dominated loose deposits, which were collected from a real DWDSs through pipe flushing, were firstly found to possess obvious toxicity to human liver cells. To further evaluate the potential harms of the deposits, FeOOH crystals (which is one of the most representative components in the deposits of DWDSs) were grown with different types of coexisting matters which may emerge in DWDSs. Results showed that the FeOOH had obvious structure transformation with coexisting matters which further influenced their toxicity: the samples with sharp surfaces had higher toxicity than those with smooth surfaces. Interestingly, although the FeOOH particles formed with perfluorooctanoic acid (FeOOH-PFOA) did not have the sharpest surface or smallest particle size among all the samples, they demonstrated the highest toxicity with strong generation of reactive oxygen species. Experimental and theoretical studies verified that PFOA induced the electron migration around Fe in FeOOH-PFOA particles. The FeOOH-PFOA not only was able to capture electrons directly from DNA, but also generated ROS from O₂ using DNA as an electron donor which might greatly enhance the oxidative damage to cells. This study would broaden the understanding of the potential harms of deposits in DWDSs.

Core-composite mediated separation of diverse nanoparticles to purity

A generalized method for sorting nanoparticles based on their cores does not exist; it is an immediate necessity, and an approach incorporating cost-effectiveness and biocompatibility is in demand. Therefore, an efficient method for the separation of various mixed core-compositions or dissimilar metallic nanoparticles to their pure forms at the nano-bio interface was developed. Various simple core-combinations of monodispersed nanoparticles with dual cores, including silver plus gold, iron oxide plus gold and platinum plus gold, to the complex three-set core-combinations of platinum plus gold plus silver and platinum plus iron plus gold were sorted using step-gradient centrifugation in a sucrose suspension. Viscosity mediated differential terminal velocities of the nanoparticles permitted diversified dragging at different gradients allowing separation. Stability, purity and properties of the nanoparticles during separation were evaluated based on visual confirmation and by employing advanced instrumentations. Moreover, theoretical studies validated our experimental observations, revealing the roles of various parameters, such as the viscosity of sucrose, the density of the particles and the velocity and duration of centrifugation, involved during the separation process. This remarkably rapid, cost-efficient and sustainable strategy can be adapted to separate other cores of nanoparticles for various biomedical research purposes, primarily to understand nanoparticle induced toxicity and particle fate and transformations in natural biotic environments.

Re-Potentiation of β-Lactam Antibiotic by Synergistic Combination with Biogenic Copper Oxide Nanocubes against Biofilm Forming Multidrug-Resistant Bacteria

Biofilm-associated tissue and device infection is a major threat to therapy. The present work aims to potentiate β-lactam antibiotics with biologically synthesized copper oxide nanoparticles. The synergistic combination of amoxyclav with copper oxide nanoparticles was investigated by checkerboard assay and time-kill assay against bacteria isolated from a burn wound and a urinary catheter. The control of biofilm formation and extracellular polymeric substance production by the synergistic combination was quantified in well plate assay. The effect of copper oxide nanoparticles on the viability of human dermal fibroblasts was evaluated. The minimum inhibitory concentration and minimum bactericidal concentration of amoxyclav were 70 μg/mL and 140 μg/mL, respectively, against Proteus mirabilis and 50 μg/mL and 100 μg/mL, respectively, against Staphylococcus aureus. The synergistic combination of amoxyclav with copper oxide nanoparticles reduced the minimum inhibitory concentration of amoxyclav by 16-fold against P. mirabilis and 32-fold against S. aureus. Above 17.5 μg/mL, amoxyclav exhibited additive activity with copper oxide nanoparticles against P. mirabilis. The time-kill assay showed the efficacy of the synergistic combination on the complete inhibition of P. mirabilis and S. aureus within 20 h and 24 h, respectively, whereas amoxyclav and copper oxide nanoparticles did not inhibit P. mirabilis and S. aureus until 48 h. The synergistic combination of amoxyclav with copper oxide nanoparticles significantly reduced the biofilm formed by P. mirabilis and S. aureus by 85% and 93%, respectively. The concentration of proteins, carbohydrates, and DNA in extracellular polymeric substances of the biofilm was significantly reduced by the synergistic combination of amoxyclav and copper oxide nanoparticles. The fibroblast cells cultured in the presence of copper oxide nanoparticles showed normal morphology with 99.47% viability. No cytopathic effect was observed. Thus, the study demonstrated the re-potentiation of amoxyclav by copper oxide nanoparticles.

Functional sustainability of periphytic biofilms in organic matter and Cu2+ removal during prolonged exposure to TiO2 nanoparticles

Responses of microbial communities to nanotoxicity in aquatic ecosystems are largely unknown, particularly with respect to relationship between community dynamics and functions. Here, periphytic biofilms were selected as a model of species-rich microbial communities to elucidate their responses when exposed to titanium dioxide nanoparticles (TiO₂-NPs). Especially, the relationships between the functions (e.g. organic matter and Cu²⁺ removal) and community dynamics after long-term exposure to TiO₂-NPs were assessed systematically. After 5days exposure to TiO₂-NPs (5mgL^-1), periphytic biofilms showed sustainable functions in pollutant removal and strong plasticity in defensing the toxic disturbance of TiO₂-NPs, including photosynthesis and carbon metabolic diversity. The sustainable pollutant removal functions of periphytic biofilms were attributed to their functional redundancy. Specifically, periphytic biofilms altered their composition with cyanobacteria, Sphingobacteriia and Spirochaetes being the newly dominant taxa, and changed the carbon substrate utilization pattern to maintain high photosynthesis and metabolic rates. Moreover, extracellular polymeric substances (EPS) especially proteins were overproduced to bind the NPs and thereby reduce the nanotoxicity. The information obtained in this study may greatly help to understand the interactions between microbial community dynamics and function under NPs exposure conditions and functional redundancy is an important mechanism of periphytic biofilms to maintain sustainable functions.

Shape-dependent antimicrobial activities of silver nanoparticles

Purpose: An important application of silver nanoparticles (Ag NPs) is their use as an antimicrobial and wound dressing material. The aim of this study is to investigate the morphological dependence on the antimicrobial activity and cellular response of Ag NPs. Materials and methods: Ag NPs of various shapes were synthesized in an aqueous solution using a simple method. The morphology of the synthesized Ag NPs was observed via TEM imaging. The antimicrobial activity of the Ag NPs with different morphologies was evaluated against various microorganisms (Escherichia coli [E. coli], Staphylococcus aureus [S. aureus], Pseudomonas aeruginosa [P. aeruginosa]). The antimicrobial activity of the Ag NPs was also examined according to the concentration in terms of the growth rate of E. coli. Results: The TEM images indicated that the Ag NPs with different morphologies (sphere, disk and triangular plate) had been successfully synthesized. The antimicrobial activity obtained from the inhibition zone was in the order of spherical Ag NPs > disk Ag NPs > triangular plate Ag NPs. In contrast, fibroblast cells grew well in all types of Ag NPs when the cell viability was evaluated via an MTT assay. An inductively coupled plasma mass assay showed that the difference in the antimicrobial activities of the Ag NPs was closely associated with the difference in the release rate of the Ag ions due to the difference in the surface area of the Ag NPs. Conclusion: The morphological dependence of the antimicrobial activity of the Ag NPs can be explained by the difference in the Ag ion release depending on the shape. Therefore, it will be possible to control the antimicrobial activity by controlling the shape and size of the Ag NPs.

Effects of Nanoparticles on Plant Growth-Promoting Bacteria in Indian Agricultural Soil

Soil bacteria are some of the key players affecting plant productivity. Soil today is exposed to emerging contaminants like metal engineered nanoparticles. The objective of this study was to evaluate the toxicological effects of silver and zinc oxide nanoparticles on bacteria classified as plant growth-promoting bacteria. Three types of bacteria—nitrogen fixers, phosphate solubilizers, and biofilm formers—were exposed to engineered nanoparticles. Initially, the effect of silver and zinc oxide nanoparticles was determined on pure cultures of the bacteria. These nanoparticles were then applied to soil to assess changes in composition of bacterial communities. Impacts of the nanoparticles were analyzed using Illumina MiSeq sequencing of 16S rRNA genes. In the soil used, relative abundances of the dominant and agriculturally significant phyla, namely, Proteobacteria, Actinobacteria, and Firmicutes, were altered in the presence of silver nanoparticles. Silver nanoparticles changed the abundance of the three phyla by 25 to 45%. Zinc oxide nanoparticles showed negligible effects at the phylum level. Thus, silver nanoparticles may impact bacterial communities in soil, and this in turn may influence processes carried out by soil bacteria.

Quantitative Mapping of Oxidative Stress Response to Lithium Cobalt Oxide Nanoparticles in Single Cells Using Multiplexed in Situ Gene Expression Analysis

Engineered nanoparticles (NPs) can negatively impact biological systems through induced generation of reactive oxygen species (ROS). Overproduced ROS cause biochemical damage and hence need to be effectively buffered by a sophisticated cellular oxidative stress response system. How this complex cellular system, which consists of multiple enzymes, responds to NP-induced ROS is largely unknown. Here, we apply a single cell analysis to quantitatively evaluate 10 key ROS responsive genes simultaneously to understand how the cell prioritizes tasks and reallocates resources in response to NP-induced oxidative stress. We focus on rainbow trout gill epithelial cells-a model cell type for environmental exposure-and their response to the massive generation of ROS induced by lithium cobalt oxide (LCO) NPs, which are extensively used as cathode materials in lithium ion batteries. Using multiplexed fluctuation localization imaging-based fluorescence in situ hybridization (fliFISH) in single cells, we found a shift in the expression of oxidative stress response genes with initial increase in genes targeting superoxide species, followed by increase in genes targeting peroxide and hydroxyl species. In contrast, Li⁺ and Co²⁺, at concentrations expected to be shed from the NPs, did not induce ROS generation but showed a potent inhibition of transcription for all 10 stress response genes. Taken together, our findings suggest a "two-hit" model for LCO NP toxicity, where the intact LCO NPs induce high levels of ROS that elicit sequential engagement of stress response genes, while the released metal ions suppress the expression of these genes. Consequently, these effects synergistically drive the exposed cells to become more vulnerable to ROS stress and damage.

Nanomaterials and microbes' interactions: a contemporary overview

Use of nanomaterials in the field of science and technology includes different fields in food industry, medicine, agriculture and cosmetics. Nanoparticle-based sensors have wide range of applications in food industry for identification and detection of chemical contaminants, pathogenic bacteria, toxins and fungal toxins from food materials with high specificity and sensitivity. Nanoparticle-microbe interactions play a significant role in disease treatment in the form of antimicrobial agents. The inhibitory mechanism of nanoparticles against different bacteria and fungi includes release of metal ions that interacts with cellular components through various pathways including reactive oxygen species (ROS) generation, pore formation in cell membranes, cell wall damage, DNA damage, and cell cycle arrest and ultimately inhibits the growth of cells. Nanoparticle-based therapies are growing to study the therapeutic treatments of plant diseases and to prevent the growth of phytopathogens leading to the growing utilization of engineered nanomaterials. Hence, with this background, the present review focuses thoroughly on detailed actions and responses of nanomaterials against different bacteria and fungi as well as food sensing and storage.

Nanotoxicity of engineered nanomaterials (ENMs) to environmentally relevant beneficial soil bacteria - a critical review

Deposition of engineered nanomaterials (ENMs) in various environmental compartments is projected to continue rising exponentially. Terrestrial environments are expected to be the largest repository for environmentally released ENMs. Because ENMs are enriched in biosolids during wastewater treatment, agriculturally applied biosolids facilitate ENM exposure of key soil micro-organisms, such as plant growth-promoting rhizobacteria (PGPR). The ecological ramifications of increasing levels of ENM exposure of terrestrial micro-organisms are not clearly understood, but a growing body of research has investigated the toxicity of ENMs to various soil bacteria using a myriad of toxicity end-points and experimental procedures. This review explores what is known regarding ENM toxicity to important soil bacteria, with a focus on ENMs which are expected to accumulate in terrestrial ecosystems at the highest concentrations and pose the greatest potential threat to soil micro-organisms having potential indirect detrimental effects on plant growth. Knowledge gaps in the fundamental understanding of nanotoxicity to bacteria are identified, including the role of physicochemical properties of ENMs in toxicity responses, particularly in agriculturally relevant micro-organisms. Strategies for improving the impact of future research through the implementation of in-depth ENM characterization and use of necessary experimental controls are proposed. The future of nanotoxicological research employing microbial ecoreceptors is also explored, highlighting the need for continued research utilizing bacterial isolates while concurrently expanding efforts to study ENM-bacteria interactions in more complex environmentally relevant media, e.g. soil. Additionally, the particular importance of future work to extensively examine nanotoxicity in the context of bacterial ecosystem function, especially of plant growth-promoting agents, is proposed.