Susceptibility of non-enveloped DNA- and RNA-type viruses to photodynamic inactivation

Wastewater disinfection with photodynamic treatment and evaluation of its ecotoxicological effects

Research has demonstrated the presence of viruses in wastewater (WW), which can remain viable for a long period, posing potential health risks. Conventional WW treatment methods involving UV light, chlorine and ozone efficiently reduce microbial concentrations, however, they produce hazardous byproducts and microbial resistance that are detrimental to human health and the ecosystem. Hence, there is a need for novel disinfection techniques. Antimicrobial Photodynamic Inactivation (PDI) emerges as a promising strategy, utilizing photosensitizers (PS), light, and dioxygen to inactivate viruses. This study aims to assess the efficacy of PDI by testing methylene blue (MB) and the cationic porphyrin TMPyP as PSs, along a low energy consuming white light source (LED) at an irradiance of 50 mW/cm2, for the inactivation of bacteriophage Phi6. Phi6 serves as an enveloped RNA-viruses surrogate model in WW. PDI experiments were conducted in a buffer solution (PBS) and real WW matrices (filtered and non-filtered). Considering the environmental release of the treated effluents, this research also evaluated the ecotoxicity of the resulting solution (post-PDI treatment effluent) on the model organism Daphnia magna, following the Organisation for Economic Cooperation and Development (OECD) immobilization technical 202 guideline. Daphnids were exposed to WW containing the tested PS at different concentrations and dilutions (accounting for the dilution factor during WW release into receiving waters) over 48 h. The results indicate that PDI with MB efficiently inactivated the model virus in the different aqueous matrices, achieving reductions superior to 8 log10 PFU/mL, after treatments of 5 min in PBS and of ca. 90 min in WW. Daphnids survival increased when subjected to the PDI-treated WW with MB, considering the dilution factor. Overall, the effectiveness of PDI in eliminating viruses in WW, the fading of the toxic effects on daphnids after MB' irradiation and the rapid dilution effect upon WW release in the environment highlight the possibility of using MB in WW PDI-disinfection.

Photophysical properties of Radachlorin photosensitizer in solutions of different pH, viscosity and polarity

We present a thorough experimental investigation of fluorescence properties of Radachlorin photosensitizer in solutions of different acidity, viscosity and polarity. Experiments were performed using time-resolved fluorescence lifetime imaging and time-resolved analysis of polarized fluorescence. Variations of solution acidity resulted in considerable changes of Radachlorin fluorescence quantum yield and lifetime in the pH range from 4 to 7, but did not affect the rotational diffusion time, and almost did not change the quantum yield and characteristic times of singlet oxygen phosphorescence. Variations of solution polarity and viscosity were achieved by changing ethanol or methanol fraction in aqueous solution. The decrease of solution polarity resulted in nonlinear rise of Radachlorin fluorescence quantum yield and lifetime up to alcohol concentration of 50%-65%, as well as in considerable rise of singlet oxygen quantum yield and significant changes in characteristic times of its phosphorescence. Variations of solution viscosity resulted in changes of rotational diffusion time of Radachlorin molecules, which appeared to be in perfect correlation with methanol solution viscosity. Good correspondence with ethanol solution viscosity was observed only up to 50% alcohol fraction. Deviations of rotational diffusion time of Radachlorin molecules from direct proportionality with solution viscosity at higher ethanol concentrations were suggested to be due to different solvation conditions. The data obtained can give important reference points for analysis of microenvironment of Radachlorin molecules, their intracellular localization and performance in singlet oxygen generation.

Performance comparison of photodynamic antimicrobial chemotherapy with visible-light-activated organic dyes: Rose bengal, crystal violet, methylene blue, and toluidine blue O

This study evaluated the photobiocidal performance of four widely distributed visible-light-activated (VLA) dyes against two bacteria (Staphylococcus epidermidis and Escherichia coli) and two bacteriophages (phages MS2 and phi 6): rose bengal (RB), crystal violet, methylene blue, and toluidine blue O (TBO). The photobiocidal performance of each dye depended on the relationship between the type of dye and microorganism. Gram-negative E. coli and the non-enveloped structure of phage MS2 showed more resistance to the photobiocidal reaction than Gram-positive S. epidermidis and the enveloped structure of phage phi 6. RB had the highest potential to yield reactive oxygen species. However, the photobiocidal performance of RB was dependent on the magnitude of the surface charge of the microorganisms; for example, anionic RB induced a negative surface charge and thus electrical repulsion. On the other hand, the photobiocidal performance of TBO was observed to be less affected by the microorganism type. The comparative results presented in our study have significant implications for selecting photodynamic antimicrobial chemotherapy (PACT) dyes suitable for specific situations and purposes. Furthermore, they contribute to the advancement of PACT-related technologies by enhancing their applicability and scalability.

Multicomponent Molecular Systems Based on Porphyrins, 1,3,5-Triazine and Carboranes: Synthesis and Characterization

2,4,6-Trichloro-1,3,5-triazine (cyanuric chloride) is an excellent coupling reagent for the preparation of highly structured multifunctional molecules. Three component systems based on porphyrin, cyanuric chloride and carborane clusters were prepared by a one-pot stepwise amination of cyanuric chloride with 5-(4-aminophenyl)-10,15,20-triphenylporphyrin, followed by replacement of the remaining chlorine atoms with carborane S- or N-nucleophiles. Some variants of 1,3,5-triazine derivatives containing porphyrin, carborane and residues of biologically active compounds such as maleimide, glycine methyl ester as well as thioglycolic acid, mercaptoethanol and hexafluoroisopropanol were also prepared. A careful control of the reaction temperature during the substitution reactions will allow the synthesis of desired compounds in a good to high yields. The structures of synthesized compounds were determined with UV-vis, IR, 1H NMR, 11B NMR, MALDI-TOF or LC-MS spectroscopic data. The dark and photocytotoxicity as well as intracellular localization and photoinduced cell death for compounds 8, 9, 17, 18 and 24 were evaluated.

Photoinactivation of Phage Phi6 as a SARS-CoV-2 Model in Wastewater: Evidence of Efficacy and Safety

The last two years have been marked by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic. This virus is found in the intestinal tract; it reaches wastewater systems and, consequently, the natural receiving water bodies. As such, inefficiently treated wastewater (WW) can be a means of contamination. The currently used methods for the disinfection of WW can lead to the formation of toxic compounds and can be expensive or inefficient. As such, new and alternative approaches must be considered, namely, photodynamic inactivation (PDI). In this work, the bacteriophage φ6 (or, simply, phage φ6), which has been used as a suitable model for enveloped RNA viruses, such as coronaviruses (CoVs), was used as a model of SARS-CoV-2. Firstly, to understand the virus's survival in the environment, phage φ6 was subjected to different laboratory-controlled environmental conditions (temperature, pH, salinity, and solar and UV-B irradiation), and its persistence over time was assessed. Second, to assess the efficiency of PDI towards the virus, assays were performed in both phosphate-buffered saline (PBS), a commonly used aqueous matrix, and a secondarily treated WW (a real WW matrix). Third, as WW is generally discharged into the marine environment after treatment, the safety of PDI-treated WW was assessed through the determination of the viability of native marine water microorganisms after their contact with the PDI-treated effluent. Overall, the results showed that, when used as a surrogate for SARS-CoV-2, phage φ6 remains viable in different environmental conditions for a considerable period. Moreover, PDI proved to be an efficient approach in the inactivation of the viruses, and the PDI-treated effluent showed no toxicity to native aquatic microorganisms under realistic dilution conditions, thus endorsing PDI as an efficient and safe tertiary WW disinfection method. Although all studies were performed with phage φ6, which is considered a suitable model of SARS-CoV-2, further studies using SARS-CoV-2 are necessary; nevertheless, the findings show the potential of PDI for controlling SARS-CoV-2 in WW.

Singlet oxygen generation in aerosol jet and on biological surfaces

The paper presents steady-state and time-resolved experiments on photophysical processes associated with photodynamic inactivation of infections provided by nebulization of Radachlorin photosensitizer solution. As models of surfaces subjected to photodynamic inactivation we used glass, plant leaf, mushroom cap peel and superficial fascia of chicken and salmon skin flaps. The oxygen content in the photosensitizer solution was varied by blowing with atmospheric air and with pure oxygen. It was shown that singlet oxygen was generated efficiently in the aerosol jet and that its amount increased noticeably at higher oxygen concentrations. The kinetics of photosensitizer photobleaching on different surfaces were found to be significantly different with characteristic decay times varying from seconds for leaf and glass to minutes for fascial flaps. This observation was attributed to much faster oxygen depletion on rough crumbly surfaces of biological samples due to effective oxidation reactions occurred. The singlet oxygen generation and degradation times, and the relative quantum yield were determined on different surfaces by recording time-resolved phosphorescence at about 1270 nm under normoxic and hyperoxic conditions and analyzed on the basis of the set of master equations. The results obtained provide reference marks for choosing optimal irradiation durations for photodynamic inactivation of pathogenic infectious agents (bacteria, mycobacteria, fungi, viruses) on mucous membranes, including the tracheobronchial tree.

Photodynamic viral inactivation: Recent advances and potential applications

Antibiotic-resistant bacteria, which are growing at a frightening rate worldwide, has put the world on a long-standing alert. The COVID-19 health crisis reinforced the pressing need to address a fast-developing pandemic. To mitigate these health emergencies and prevent economic collapse, cheap, practical, and easily applicable infection control techniques are essential worldwide. Application of light in the form of photodynamic action on microorganisms and viruses has been growing and is now successfully applied in several areas. The efficacy of this approach has been demonstrated in the fight against viruses, prompting additional efforts to advance the technique, including safety use protocols. In particular, its application to suppress respiratory tract infections and to provide decontamination of fluids, such as blood plasma and others, can become an inexpensive alternative strategy in the fight against viral and bacterial infections. Diverse early treatment methods based on photodynamic action enable an accelerated response to emerging threats prior to the availability of preventative drugs. In this review, we evaluate a vast number of photodynamic demonstrations and first-principle proofs carried out on viral control, revealing its potential and encouraging its rapid development toward safe clinical practice. This review highlights the main research trends and, as a futuristic exercise, anticipates potential situations where photodynamic treatment can provide a readily available solution.

A Comparison of Porphyrin Photosensitizers in Photodynamic Inactivation of RNA and DNA Bacteriophages

Effective broad-spectrum antiviral treatments are in dire need as disinfectants and therapeutic alternatives. One such method of disinfection is photodynamic inactivation, which involves the production of reactive oxygen species from dissolved oxygen in response to light-stimulated photosensitizers. This study evaluated the efficacy of functionalized porphyrin compounds for photodynamic inactivation of bacteriophages as human virus surrogates. A blue-light light emitting diode (LED) lamp was used to activate porphyrin compounds in aqueous solution (phosphate buffer). The DNA bacteriophages ΦX174 and P22 were more resistant to porphyrin TMPyP photodynamic inactivation than RNA bacteriophage fr, with increasing rates of inactivation in the order: ΦX174 << P22 << fr. Bacteriophage ΦX174 was therefore considered a resistant virus suitable for the evaluation of three additional porphyrins. These porphyrins were synthesized from TMPyP by inclusion of a central palladium ion (PdT4) and/or the addition of a hydrophobic C14 chain (PdC14 or C14). While the inactivation rate of bacteriophage ΦX174 via TMPyP was similar to previous reports of resistant viruses, ΦX174 inactivation increased by a factor of approximately 2.5 using the metalloporphyrins PdT4 and PdC14. The order of porphyrin effectiveness was TMPyP < C14 < PdT4 < PdC14, indicating that both Pd²⁺ ligation and C14 functionalization aided virus inactivation.

Light-based technologies for management of COVID-19 pandemic crisis

The global dissemination of the novel coronavirus disease (COVID-19) has accelerated the need for the implementation of effective antimicrobial strategies to target the causative agent SARS-CoV-2. Light-based technologies have a demonstrable broad range of activity over standard chemotherapeutic antimicrobials and conventional disinfectants, negligible emergence of resistance, and the capability to modulate the host immune response. This perspective article identifies the benefits, challenges, and pitfalls of repurposing light-based strategies to combat the emergence of COVID-19 pandemic.

The Application of Porphyrins and Their Analogues for Inactivation of Viruses

The problem of treating viral infections is extremely relevant due to both the emergence of new viral diseases and to the low effectiveness of existing approaches to the treatment of known viral infections. This review focuses on the application of porphyrin, chlorin, and phthalocyanine series for combating viral infections by chemical and photochemical inactivation methods. The purpose of this review paper is to summarize the main approaches developed to date in the chemical and photodynamic inactivation of human and animal viruses using porphyrins and their analogues and to analyze and discuss the information on viral targets and antiviral activity of porphyrins, chlorins, of their conjugates with organic/inorganic compounds obtained in the last 10–15 years in order to identify the most promising areas.

Water-soluble tetra-cationic porphyrins display virucidal activity against Bovine adenovirus and Bovine alphaherpesvirus 1

Porphyrins are photoactive compounds that can absorb the energy of light and transfer it to oxygen molecules, producing reactive oxygen species (ROS). Once produced, ROS may alter biological molecules and cellular mechanisms, leading to cell apoptosis or inactivation of microorganisms, such as bacteria, fungi, and viruses. Therefore, the objective of this study was to evaluate the in vitro virucidal activity of six tetra-cationic porphyrins against two bovine viruses (Bovine alphaherpesvirus 1, BoHV-1, enveloped; and Bovine adenovirus, BAV, non-enveloped). For this, viral suspensions were incubated with each porphyrin (H₂TMeP, ZnTMeP, and CuTMeP at 4.0 μM, NiTMeP at 5.0 μM, and CoClTMeP and MnClTMeP at 1.0 μM) and exposed to white-light irradiation for 0, 60, 120, and 180 min (BAV) or 0, 30, 60, 90, and 120 min (BoHV-1). Then, the remaining viral titers were determined by limiting dilution and compared with the control (virus + porphyrins without light exposition). The porphyrins H₂TMeP and ZnTMeP showed the highest virucidal activity against both viruses. ZnTMeP inactivated BoHV-1 after 30 min of photoactivation and H₂TMeP after 60 min. The BAV was photo-inactivated by both porphyrins at 180 min of white-light exposition. CuTMeP, NiTMeP, and CoClTMeP porphyrins had weak virucidal activity against BoHV-1 and MnClTMeP showed no virucidal activity against both viruses. These results indicated that free-base H₂TMeP and ZnTMeP porphyrins present virucidal activity against non-enveloped and enveloped viruses, opening the possibility for their use to inactivate viruses on surfaces, biological substrates, and solutions.

Antimicrobial Photodynamic Therapy in the Control of COVID-19

Antimicrobial photodynamic therapy (aPDT), using well known, safe and cost-effective photosensitizers, such as phenothiazines, e.g., methylene blue (MB), or porphyrins, e.g., protoporphyrin-IX (PP-IX), might help to mitigate the COVID-19 either to prevent infections or to develop photoactive fabrics (e.g., masks, suits, gloves) to disinfect surfaces, air and wastewater, under artificial light and/or natural sunlight.

Trends and targets in antiviral phototherapy

Photodynamic therapy (PDT) is a well-established treatment option in the treatment of certain cancerous and pre-cancerous lesions. Though best-known for its application in tumor therapy, historically the photodynamic effect was first demonstrated against bacteria at the beginning of the 20^th century. Today, in light of spreading antibiotic resistance and the rise of new infections, this photodynamic inactivation (PDI) of microbes, such as bacteria, fungi, and viruses, is gaining considerable attention. This review focuses on the PDI of viruses as an alternative treatment in antiviral therapy, but also as a means of viral decontamination, covering mainly the literature of the last decade. The PDI of viruses shares the general action mechanism of photodynamic applications: the irradiation of a dye with light and the subsequent generation of reactive oxygen species (ROS) which are the effective phototoxic agents damaging virus targets by reacting with viral nucleic acids, lipids and proteins. Interestingly, a light-independent antiviral activity has also been found for some of these dyes. This review covers the compound classes employed in the PDI of viruses and their various areas of use. In the medical area, currently two fields stand out in which the PDI of viruses has found broader application: the purification of blood products and the treatment of human papilloma virus manifestations. However, the PDI of viruses has also found interest in such diverse areas as water and surface decontamination, and biosafety.

Water Disinfection in Rural Areas Demands Unconventional Solar Technologies

Providing access to safe drinking water is a prerequisite for protecting public health. Vast improvements in drinking water quality have been witnessed during the last century, particularly in urban areas, thanks to the successful implementation of large, centralized water treatment plants and the distribution of treated water via underground networks of pipes. Nevertheless, infection by waterborne pathogens through the consumption of biologically unsafe drinking water remains one of the most significant causes of morbidity and mortality in developing rural areas. In these areas, the construction of centralized water treatment and distribution systems is impractical due to high capital costs and lack of existing infrastructure. Improving drinking water quality in developing rural areas demands a paradigm shift to unconventional, innovative water disinfection strategies that are low cost and simple to implement and maintain, while also requiring minimal infrastructure. The implementation of point-of-use (POU) disinfection techniques at the household- or community-scale is the most promising intervention strategy for producing immediate health benefits in the most vulnerable rural populations. Among POU techniques, solar-driven processes are considered particularly instrumental to this strategy, as developing rural areas that lack safe drinking water typically receive higher than average surface sunlight irradiation. Materials that can efficiently harvest sunlight to produce disinfecting agents are pivotal for surpassing the disinfection performance of conventional POU techniques. In this account, we highlight recent advances in materials and processes that can harness sunlight to disinfect water. We describe the physicochemical properties and molecular disinfection mechanisms for four categories of disinfectants that can be generated by harvesting sunlight: heat, germicidal UV radiation, strong oxidants, and mild oxidants. Our recent work in developing materials-based solar disinfection technologies is discussed in detail, with particular focus on the materials' mechanistic functions and their modes of action for inactivation of three common types of waterborne pathogens (i.e., bacteria, virus, and protozoa). We conclude that different solar disinfection technologies should be applied depending on the source water quality and target pathogen due to significant variations on susceptibility of microbial components to disparate disinfectants. In addition, we expect that ample research opportunities exist on reactor design and process engineering for scale-up and improved performance of these solar materials, while accounting for the infrastructure demand and capital input. Although the practical implementation of new treatment techniques will face social and economic challenges that cannot be overlooked, novel technologies such as these can play a pivotal role in reducing water borne disease burden in rural communities in the developing world.

Advances in aPDT based on the combination of a porphyrinic formulation with potassium iodide: Effectiveness on bacteria and fungi planktonic/biofilm forms and viruses

The increasing world-wide rate of antibiotic resistance as well as the capacity of microorganisms to form biofilms, have led to a higher incidence of mortal infections that require alternative methods for their control. Antimicrobial photodynamic therapy (aPDT) emerged as an effective solution against resistant strains. The present work aims to evaluate the aPDT efficiency of a photosensitizer (PS) based on a low-cost formulation constituted by five cationic porphyrins (FORM) and its potentiation effect by KI on a broad spectrum of microorganisms under white light (380–700 nm, 25 W/m[Formula: see text]. The aPDT assays were performed with different concentrations of FORM (0.1 to 5.0 [Formula: see text]M) and 100 mM of KI on planktonic and biofilm forms of gram-positive (methicillin resistant Staphylococcus aureus–MRSA) and gram-negative (Escherichia coli resistant to chloramphenicol and ampicillin) bacteria, of the fungi Candida albicans and on a T4-like bacteriophage as a mammalian virus model. The results indicate that the FORM alone is an efficient PS to photoinactivate not only gram-negative and gram-positive bacteria, but also C. albicans, in planktonic and biofilm forms, and T4-like phage at low concentrations (<5.0 [Formula: see text]M). The presence of KI enhanced the photodynamic effect of this FORM for all microorganisms on the planktonic form, allowing the reduction of PS concentration and treatment time. The results also show that the combination FORM/KI is highly efficient in the elimination of already well-established biofilms of E. coli,S. aureus and C. albicans. This effect is probably associated with longer-lived iodine reactive species produced during the aPDT treatment.

Blue Light Disinfection in Hospital Infection Control: Advantages, Drawbacks, and Pitfalls

Hospital acquired infections (HAIs) are a serious problem that potentially affects millions of patients whenever in contact with hospital settings. Worsening the panorama is the emergence of antimicrobial resistance by most microorganisms implicated in HAIs. Therefore, the improvement of the actual surveillance methods and the discovery of alternative approaches with novel modes of action is vital to overcome the threats created by the emergence of such resistances. Light therapy modalities represent a viable and effective alternative to the conventional antimicrobial treatment and can be preponderant in the control of HAIs, even against multidrug resistant organisms (MDROs). This review will initially focus on the actual state of HAIs and MDROs and which methods are currently available to fight them, which is followed by the exploration of antimicrobial photodynamic therapy (aPDT) and antimicrobial blue light therapy (aBLT) as alternative approaches to control microorganisms involved in HAIs. The advantages and drawbacks of BLT relatively to aPDT and conventional antimicrobial drugs as well as its potential applications to destroy microorganisms in the healthcare setting will also be discussed.

Curcumin-mediated photodynamic inactivation (PDI) against DH5α contaminated in oysters and cellular toxicological evaluation of PDI-treated oysters

The objective of this study was to evaluate the bactericidal effect of curcumin (CUR)-mediated photodynamic inactivation (PDI) against Escherichia coli DH5α in vitro and in oysters, then further investigate the edible security of PDI-treated oysters based on cellular toxicological methods. First, DH5α cells were irradiated by a 470 nm LED light source with an energy density of 3.6 J/cm². Colony forming units (CFU) were counted and the viability of DH5α cells was calculated after treatment with CUR-mediated PDI. Intracellular production of reactive oxygen species (ROS) was studied by measuring the fluorescence of 2, 7-dichlorofluorescein (DCF) using a flow cytometry. Membrane permeability was measured using confocal laser scanning microscopy (CLSM) with propidium iodide (PI) staining. After that, the bactericidal effect of CUR-mediated PDI was evaluated in oysters which were pre-contaminated with DH5α cells. Finally, cellular toxicology of PDI-treated oysters was evaluated through morphological observation, 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay, DNA ladder assay, and nuclear staining. Results showed that the viability of DH5α was significantly decreased in a CUR concentration-dependent manner and resulted in an approximately 3.5-log reduction at the concentration of 20 μM. After treatment with CUR-mediated PDI (20 μM, 3.6 J/cm²), the ROS level in DH5α cells and the membrane permeability markedly increased. Our data demonstrated that CUR-mediated PDI had a good decontamination effect against DH5α contaminated in oysters. After incubation with PDI-treated oysters, fibroblasts L929 cell morphology, MTT absorbance and cell apoptosis had no obvious changes. Our findings preliminarily demonstrated that CUR-mediated PDI-treated oysters had no cytotoxicity to fibroblasts.

Edible Dye-Enhanced Solar Disinfection with Safety Indication

The rural developing world faces disproportional inequity in drinking water access, where point-of-use water treatment technologies often fail to achieve adequate levels of pathogen removal, especially for viruses. Solar disinfection (SODIS) is practiced because of its universal applicability and low implementation cost, though the excessively long treatment time and lack of safety indication hinder wider implementation. This study presents an enhanced SODIS scheme that utilizes erythrosine-a common food dye-as a photosensitizer to produce singlet oxygen for virus inactivation and to indicate the completion of water disinfection through photobleaching color change. Experimental results and predictions based on global solar irradiance data suggest that over 99.99% inactivation could be achieved within 5 min in the majority of developing countries, reducing the time for SODIS by 2 orders of magnitude. Preserving the low cost of traditional SODIS, erythrosine embodies edible dye-enhanced SODIS, an efficient water disinfection method that could potentially be used by governments and non-governmental organizations to improve drinking water quality in rural developing communities.

Indirect and direct damage to genomic DNA induced by 5,10,15-tris(1-methylpyridinium-4-yl)-20-(pentafluorophenyl)porphyrin upon photodynamic action

Photodynamic inactivation has been proposed as an efficient antimicrobial treatment for localized infections. Even though it is generally accepted that the cell wall and membrane components are the main targets of the photodynamic process, the importance of the nucleic acids as photodynamic targets is not yet fully understood. In this study, we investigated the photodamage of the genomic nucleic acids of the Gram negative bacterium Escherichia coli, using 5,10,15-tris(1-methylpyridinium-4-yl)-20-(pentafluorophenyl)porphyrin tri-iodide (Tri-Py[Formula: see text]-Me-PF) as photosensitizing agent. We tested, for the first time, the indirect photodamage effects on genomic DNA extracted from photosensitized bacteria and compared it with the direct effects on genomic DNA extracted from non-photosensitized cells, treated in otherwise similar experimental conditions. The results suggest that DNA does not seem to be a major target of photodynamic inactivation, once direct exposure to photosensitization does not damage DNA and does not significantly alter DNA concentration. The decrease in DNA concentration observed during the indirect exposure to photosensitization is directly related with the reduction of the concentration of bacterial cells. However, RNA synthesis was severely affected, once an indirect effect on proteins involved in the transcription process may cause a marked decrease in the RNA pool.

Photodynamic inactivation of Escherichia coli with cationic ammonium Zn(ii) phthalocyanines

The aim of this work was the development of a family of novel water soluble zinc(ii) phthalocyanines (Pc) for the photodynamic inactivation of Gram-negative bacteria.

Influence of external bacterial structures on the efficiency of photodynamic inactivation by a cationic porphyrin

The main targets of photodynamic inactivation (PDI) are the external bacterial structures, cytoplasmic membrane and cell wall. In this work it was evaluated how the external bacterial structures influence the PDI efficiency. To reach this objective 8 bacteria with distinct external structures were selected; 4 Gram-negative bacteria (Escherichia coli, with typical Gram-negative external structures; Aeromonas salmonicida, Aeromonas hydrophila both with an S-layer and Rhodopirellula sp., with a peptidoglycan-less proteinaceous cell wall and with cytoplasm compartmentalization) and 4 Gram-positive bacteria (Staphylococcus aureus, with typical Gram-positive external structures; Truepera radiovictrix, Deinococcus geothermalis and Deinococcus radiodurans, all with thick cell walls that give them Gram-positive stains, but including a second complex multi-layered membrane and structurally analogous to that of Gram-negative bacteria). The studies were performed in the presence of 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetraiodide (Tetra-Py(+)-Me) at 5.0 μM with white light (40 W m(-2)). The susceptibility of each bacteria to PDI by Tetra-Py(+)-Me was dependent on bacteria external structures. Although all Gram-positive bacteria were inactivated to the detection limit (reduction of ∼8 log) after 60-180 min of irradiation, the inactivation followed distinct patterns. Among the Gram-negative bacteria, E. coli was the only species to be inactivated to the detection limit (∼8 log after 180 min). The efficiency of inactivation of the two species of Aeromonas was similar (reduction of ∼5-6 log after 270 min). Rhodopirellula was less susceptible (reduction of ∼4 log after 270 min). As previously observed, the Gram-positive bacteria are more easily inactivated than Gram-negative strains, and this is even true for T. radiovictrix, D. geothermalis and D. radiodurans, which have a complex multi-layered cell wall. The results support the theory that the outer cell structures are major bacterial targets for PDI. Moreover, the chemical composition of the external structures has a stronger effect on PDI efficiency than complexity and the number of layers of the external coating, and lipids seem to be an important target of PDI.

Photodynamic inactivation of biofilm: taking a lightly colored approach to stubborn infection

Microbial biofilms are responsible for a variety of microbial infections in different parts of the body, such as urinary tract infections, catheter infections, middle-ear infections, gingivitis, caries, periodontitis, orthopedic implants, and so on. The microbial biofilm cells have properties and gene expression patterns distinct from planktonic cells, including phenotypic variations in enzymic activity, cell wall composition and surface structure, which increase the resistance to antibiotics and other antimicrobial treatments. There is consequently an urgent need for new approaches to attack biofilm-associated microorganisms, and antimicrobial photodynamic therapy (aPDT) may be a promising candidate. aPDT involves the combination of a nontoxic dye and low-intensity visible light which, in the presence of oxygen, produces cytotoxic reactive oxygen species. It has been demonstrated that many biofilms are susceptible to aPDT, particularly in dental disease. This review will focus on aspects of aPDT that are designed to increase efficiency against biofilms modalities to enhance penetration of photosensitizer into biofilm, and a combination of aPDT with biofilm-disrupting agents.

Involvement of type I and type II mechanisms on the photoinactivation of non-enveloped DNA and RNA bacteriophages

Microbial photodynamic inactivation (PDI), involving the use of a photosensitizer (PS), light and molecular oxygen, with the subsequent production of reactive oxygen species (ROS), has been considered a promising and effective technology for viral inactivation. Although singlet oxygen is generally accepted as the main damaging species in PDI, ROS like free radicals may also be involved in the process, inducing damages to proteins, lipids, nucleic acids and other molecular structures. In this study, the relative importance of each mechanism (type I and type II) on the photoinactivation of non-enveloped DNA (T4-like phage) and RNA (Qβ phage) viruses was evaluated. For this purpose, two cationic porphyrins (Tri-Py(+)-Me-PF and Tetra-Py(+)-Me) and four different ROS scavengers were used. The scavenging effect of sodium azide and L-histidine (singlet oxygen quenchers) and of D-mannitol and L-cysteine (free radical scavengers) was assessed by exposure of both phages (T4-like and Qβ) to each cationic porphyrin (5.0μM for T4-like phage and 0.5μM for Qβ phage) and white light (40Wm(-2)) in the presence of different concentrations of the scavengers (5, 10, 50 and 100mM). Sodium azide and L-histidine gave the best protection, reducing the phototoxic effect of Tri-Py(+)-Me-PF on T4-like phage respectively by 80% and 72% and in the presence of Tetra-Py(+)-Me by 90% and 78%. Free radical scavengers D-mannitol and L-cysteine did not significantly reduce the rate of T4-like phage photoinactivation (around 20% protection, for both PS). The sodium azide protection on Qβ phage photoinactivation, in the presence of Tri-Py(+)-Me-PF, was lower (39%) when compared with T4-like phage. D-mannitol did not exert on Qβ phage any protective effect after 90min of irradiation. The effect of the simultaneous presence of singlet oxygen and free radicals scavengers at 100mM confirmed that singlet oxygen (type II mechanism) is clearly the main ROS involved in T4-like and Qβ phages photoinactivation by these two cationic PS. As RNA-type phages are more easily photoinactivated when compared with DNA-type ones, the protection conferred by the scavengers during the PDI process is lower and this should be taken into account when the main mechanism involved in PDI of different viruses is to be studied.