Naphthalimide-based light-induced nitric oxide-releasing nanoscale vesicles with visual detection and cytotoxicity studies

The therapeutic potential of nitric oxide (NO) has been receiving increasing interest, but achieving controlled release under physiological conditions remains challenging. Herein, we report a colorimetric and fluorescence responsive naphthalimide-based amphiphilic N-nitroso-based NO donor (Nap-NO) and its NO-releasing behavior. Nap-NO was incorporated into phospholipid nanovesicles to make it biocompatible and water-soluble. Light-induced NO-releasing behavior and emission changes were monitored via UV-vis, colorimetric detection, IR (Infrared) spectroscopy studies, and Griess assay. The Nap-NO donor within the 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)-cholesterol vesicles exhibited a slower release rate, with a significantly extended half-life as compared to the only DOPC vesicles. Incorporating the Nap-NO into alginate hydrogel beads enables a simple, visual detection of NO release through color and emission changes. Bioimaging experiments within the HCT cell line reveal the use of the new NO donor for fluorescent bio-imaging and clearly illustrate their proficiency in killing cancer cells upon NO delivery in the presence of light.

Regulation of Nitric Oxide (NO) Release by Membrane Fluidity in Ruthenium Nitrosyl Complex-Embedded Phospholipid Vesicles

Incorporating water-insoluble nitric oxide (NO)-releasing molecules into biocompatible vesicles may allow for the tunable control of NO release on a specific target site. In vesicles, membrane fluidity plays an important role and influences the final therapeutic efficiency of drugs loaded into the vesicles. Hence, we aimed to investigate the effect of lipid fluidity on the NO release behavior of the photo-controllable ruthenium nitrosyl (Ru-NO) complex. In this regard, a new photoactive ruthenium nitrosyl complex (L.Ru-NO) with amphiphilic terpyridine ligand was synthesized and characterized in detail. L.Ru-NO was incorporated with commercial phospholipids to form nanoscale vesicles L.Ru-NO@Lip. The photoactive {Ru-NO}⁶ type complex released NO in the organic solvent CH₃CN and aqueous liposome solution by irradiating under low-intensity blue light (λ = 410 nm, 3 W). To demonstrate the effect of lipid structure and fluidity on NO release, four different liposome systems L.Ru-NO@Lip1-4 were prepared by using phospholipids such as DOPC, DSPC, DPPC, and DMPC having different chain lengths and saturation. The NO-releasing abilities of these liposomes in aqueous medium were studied by UV-vis spectrum, colorimetric Greiss, and fluorescent DAF assay. The results show that the rate of NO release could be easily tuned by varying the lipid fluidity. The effect of temperature and pH on NO release was also studied. Further, the complex L.Ru-NO and liposomes L.Ru-NO@Lip1 were assayed as an antibacterial agent against the strains of bacteria Escherichia coli and Staphylococcus aureus.

A smartphone-integrated light-up lanthanide fluorescent probe for the visual and ratiometric detection of total phosphorus in human urine and environmental water samples

Phosphate (Pi) plays an essential role in aquatic ecosystems as well as in physiological processes. Here, a dual-emission probe for the sensitive, specific and visual analysis of Pi is fabricated by coordinating Eu³⁺ with luminol and 2,6-pyridinedicarboxylic acid (DPA). Pi can significantly enhance the characteristic fluorescence of Eu³⁺ at 615 nm by promoting energy transfer from DPA to Eu³⁺ and reducing the quenching effect of water molecule, luminol with inherent emission at 423 nm further enhances the Eu³⁺ fluorescence. Accordingly, ratiometric detection of Pi can be achieved with the fluorescence ratio F₆₁₅/F₄₂₃ as a function of Pi concentration. Linearity between F₆₁₅/F₄₂₃ and Pi concentration in the range of 0.1-25 μM is shown, and the limit of detection (LOD, 3σ/K) for Pi is 0.027 µM. In addition, a continuous change in the fluorescence color of the probe from blue to red is observed with increasing Pi concentration under a UV lamp, and a smartphone-based visual method is used for the convenient and effective semi-quantitative determination of Pi. The dual-emission probe has been successfully applied to ratiometric and visual analysis of Pi in human urine and environmental water samples, and adequate results are obtained.

Molecular Probes, Chemosensors, and Nanosensors for Optical Detection of Biorelevant Molecules and Ions in Aqueous Media and Biofluids

Synthetic molecular probes, chemosensors, and nanosensors used in combination with innovative assay protocols hold great potential for the development of robust, low-cost, and fast-responding sensors that are applicable in biofluids (urine, blood, and saliva). Particularly, the development of sensors for metabolites, neurotransmitters, drugs, and inorganic ions is highly desirable due to a lack of suitable biosensors. In addition, the monitoring and analysis of metabolic and signaling networks in cells and organisms by optical probes and chemosensors is becoming increasingly important in molecular biology and medicine. Thus, new perspectives for personalized diagnostics, theranostics, and biochemical/medical research will be unlocked when standing limitations of artificial binders and receptors are overcome. In this review, we survey synthetic sensing systems that have promising (future) application potential for the detection of small molecules, cations, and anions in aqueous media and biofluids. Special attention was given to sensing systems that provide a readily measurable optical signal through dynamic covalent chemistry, supramolecular host-guest interactions, or nanoparticles featuring plasmonic effects. This review shall also enable the reader to evaluate the current performance of molecular probes, chemosensors, and nanosensors in terms of sensitivity and selectivity with respect to practical requirement, and thereby inspiring new ideas for the development of further advanced systems.

A Remarkable Fluorescence Quenching Based Amplification in ATP Detection through Signal Transduction in Self-Assembled Multivalent Aggregates

Signal transduction is essential for the survival of living organisms, because it allows them to respond to the changes in external environments. In artificial systems, signal transduction has been exploited for the highly sensitive detection of analytes. Herein, a remarkable signal transduction, upon ATP binding, in the multivalent fibrillar nanoaggregates of anthracene conjugated imidazolium receptors is reported. The aggregates of one particular amphiphilic receptor sensed ATP in high pm concentrations with one ATP molecule essentially quenching the emission of thousands of receptors. A cooperative merging of the multivalent binding and signal transduction led to this superquenching and translated to an outstanding enhancement of more than a millionfold in the sensitivity of ATP detection by the nanoaggregates; in comparison to the "molecular" imidazolium receptors. Furthermore, an exceptional selectivity to ATP over other nucleotides was demonstrated.

Artificial Signal Transduction

Communication between and inside cells as well as their response to external stimuli relies on elaborated systems of signal transduction. They all require a directional transmission across membranes, often realized by primary messenger docking onto external receptor units and subsequent internalization of the signal in form of a released second messenger. This in turn starts a cascade of events which ultimately control all functions of the living cell. Although signal transduction is a fundamental biological process realized by supramolecular recognition and multiplication events with small molecules, chemists have just begun to invent artificial models which allow to study the underlying rules, and one day perhaps to rescue damaged transduction systems in nature. This review summarizes the exciting pioneering efforts of chemists to create simple models for the basic principles of signal transduction across a membrane. It starts with first attempts to establish molecular recognition events on liposomes with embedded receptor amphiphiles and moves on to simple transmembrane signaling across lipid bilayers. More elaborated systems step by step incorporate more elements of cell signaling, such as primary and secondary messenger or a useful cellular response such as cargo release.

Supramolecular Chemistry in the Biomembrane

The combination of supramolecular functional systems with biomolecular chemistry has been a fruitful exercise for decades, leading to a greater understanding of biomolecules and to a great variety of applications, for example, in drug delivery and sensing. Within these developments, the phospholipid bilayer membrane, surrounding live cells, with all its functions has also intrigued supramolecular chemists. Herein, recent efforts from the supramolecular chemistry community to mimic natural functions of lipid membranes, such as sensing, molecular recognition, membrane fusion, signal transduction, and gated transport, are reviewed.

Luminescent and Chiroptical Properties of 1 : 1 Eu (III) : Tetracycline Species Probed by Circularly Polarized Luminescence

This study investigates the significantly different luminescent and chiroptical properties of tetracycline (TC) when coordinated to Eu(III). The approach involves understanding the 1) speciation of TC and 2) conformation and species formed between Eu(III) and TC in a ratio of 1 : 1 in a dimethylformamide (DMF) solution and as a function of the pH value. By identifying the conformational changes of the various 1 : 1 Eu(III) : TC species, the results from this study explain information on the local microenvironment about the Eu(III) metal center. In particular, ⁵ D₀ ←⁷ F₀ Eu(III) laser excitation spectroscopy was employed to distinguish the different types of species found in solution in order to understand the interaction between Eu(III) and TC. On the other hand, circularly polarized luminescence (CPL) spectroscopy was used to understand the structural changes within the 1 : 1 Eu(III) : TC complex that could be related to the chirality of the Eu(III)-containing species. The CPL spectrum serves as a "fingerprint" to indicate the conformational changes within the 1 : 1 Eu(III) : TC complex as a result of the chiroptical signal arising from the various Eu(III) : TC species.

Highly sensitive and selective fluorescent detection of phosphate in water environment by a functionalized coordination polymer

Phosphate, due to its somatotrophic effect on organisms, can cause severe eutrophication with excessive content in water. Conventional methods for phosphate detection, which are based on complicated instruments, are time-consuming. Here we report a luminescent lanthanide functionalized coordination polymer (Eu@BUC-14) by doping Eu³⁺ cations to BUC-14 nanocrystals. This Eu³⁺ functionalized hybrid (Eu@BUC-14) presents excellent luminescence features of Eu³⁺ ion that originated from efficient energy transfer from the ligand. The detection results show that Eu@BUC-14 is a highly efficient luminescent probe for phosphate detection in aqueous solutions, exhibiting high sensitivity with a low detection limit of 0.88 μM and a short response time of within 5 min. More significantly, Eu@BUC-14 has a high specificity for PO₄^3- over fifteen other pollutant anions and eleven metal cations. The sensing mechanism is proposed via an in-depth analysis of the interaction between PO₄^3- and Eu³⁺. Simultaneously, it displays high adsorption ability toward PO₄^3- (57.9 mg P/g), making it an outstanding multifunctional material. And the adsorption process plays an important role in preconcentration of PO₄^3- which can lead to a quick fluorescent response with high quenching efficiency. The practicality of Eu@BUC-14 was also validated by sensing PO₄^3- in real environment water samples.

Surfactant Aggregates Encapsulating and Modulating: An Effective Way to Generate Selective and Discriminative Fluorescent Sensors

The heterogeneous structure and dynamic balancing nature of surfactant aggregates make them attractive in developing fluorescent sensors. They can provide a number of advantages, e.g., enhanced fluorescence stability and quantum yield, detection capability in aqueous solutions, and easy operation. Thus, various strategies have been used to construct surfactant aggregate-based fluorescent sensors. Surfactant aggregates play various roles in different strategies and realize multiple sensing behaviors. Many new functions have been discovered for surfactant aggregates in constructing fluorescent sensors. In this feature article, we briefly summarize the development of surfactant aggregate-based fluorescent sensors and their applications in three different types of sensing: selective sensing, multiple analyte sensing, and cross-reactive sensing. For each type of sensing, the design strategies and the roles of surfactant aggregates are particularly introduced. An understanding of these aspects will help to expand the applications of surfactant assemblies in the sensing field.

Selective Sensing of Tyrosine Phosphorylation in Peptides Using Terbium(III) Complexes

Phosphorylation of tyrosine residues in proteins, as well as their dephosphorylation, is closely related to various diseases. However, this phosphorylation is usually accompanied by more abundant phosphorylation of serine and threonine residues in the proteins and covers only 0.05% of the total phosphorylation. Accordingly, highly selective detection of phosphorylated tyrosine in proteins is an urgent subject. In this review, recent developments in this field are described. Monomeric and binuclear Tb(III) complexes, which emit notable luminescence only in the presence of phosphotyrosine (pTyr), have been developed. There, the benzene ring of pTyr functions as an antenna and transfers its photoexcitation energy to the Tb(III) ion as the emission center. Even in the coexistence of phosphoserine (pSer) and phosphothreonine (pThr), pTyr can be efficintly detected with high selectivity. Simply by adding these Tb(III) complexes to the solutions, phosphorylation of tyrosine in peptides by protein tyrosine kinases and dephosphorylation by protein tyrosine phosphatases can be successfully visualized in a real-time fashion. Furthermore, the activities of various inhibitors on these enzymes are quantitatively evaluated, indicating a strong potential of the method for efficient screening of eminent inhibitors from a number of candidates.

Fluorescence quenching in β-cyclodextrin vesicles: membrane confinement and host-guest interactions

Fluorescent β-cyclodextrin vesicles (β-CDV) that display host cavities available for host-guest interactions at the vesicle surface were prepared by incorporation of the hydrophobic spirobifluorene-based dye 1 into the membrane of unilamellar vesicles. Fluorescence quenching of dye 1 was observed in the presence of different quenchers. Methyl viologen 2 does not quench dye 1 because it does not bind to β-CDV. 4-Nitrophenol 3 and 4-nitrophenol covalently connected to adamantane 4 quench the fluorescence of dye 1 in neutral solution, but by different mechanisms according to lifetime measurements. The quenching efficiency of 3 is pH dependent due to the presence of the phenolate form. Competition experiments with excess host and guest showed that 3 is likely to diffuse in and out of the membrane, while 4 forms an inclusion complex with β-CDV leading to close contact and efficient quenching. Our findings confirm that this dynamic supramolecular system is a versatile model to investigate quenching and recognition processes in bilayer membranes.

Fluorescent asymmetric bis-ureas for pyrophosphate recognition in pure water

Three fluorescent asymmetric bis-urea receptors (L1-L3) have been synthesised. The binding properties of L1-L3 towards different anions (fluoride, acetate, hydrogencarbonate, dihydrogen phosphate, and hydrogen pyrophosphate HPpi(3-)) have been studied by means of (1)H-NMR, UV-Vis and fluorescence spectroscopy, single crystal X-ray diffraction, and theoretical calculations. In particular, a remarkable affinity for HPpi(3-) has been observed in the case L1 (DMSO-d6/0.5% H2O) which also acts as a fluorimetric chemosensor for this anion. Interestingly, when L1 is included in cetyltrimethylammonium (CTAB) micelles, hydrogen pyrophosphate recognition can also be achieved in pure water.

A postsynthetically modified MOF hybrid as a ratiometric fluorescent sensor for anion recognition and detection

MIL-125(Ti)-AM-Eu, which is derive from MIL-125(Ti)-NH₂ by covalent postsynthetic modification, is synthesized and exhibit excellent photoluminescence features. It have been designed to be a ratiometric fluorescent sensor (I_L/I_Eu) for sensitively detecting phosphate and oxalate with a proposed dual-readout orthogonal identification pattern.

Vesicular aptasensor for the detection of thrombin

Self-assembled phospholipid vesicles are functionalized with thrombin-binding aptamers using a thiol-click reaction. The resulting aptasensors signal the binding of the analyte to the vesicle surface by changes of the emission properties of membrane co-embedded reporter dyes.

Preparation of luminescent chemosensors by post-functionalization of vesicle surfaces

A variety of luminescent chemosensors is obtained by post-functionalization of self-assembled phospholipid vesicles with receptor units ranging from metal complexes to aptamers.

Thiacalix[4]arene-functionalized vesicles as phosphorescent indicators for pyridoxine detection in aqueous solution

Luminescent DPPC vesicles, decorated by new amphiphilic tetracarboxylate derivatives ofp-tert-butylthiacalix[4]arene with Tb(iii) were used for the selective detection of pyridoxine hydrochloride.

Tb(III)-doped silica nanoparticles for sensing: effect of interfacial interactions on substrate-induced luminescent response

The present work introduces the easy modification of the water-in-oil microemulsion procedure aimed at the doping of the Tb(III) complexes within core or shell zones of the silica nanoparticles (SNs), which are designated as "core-shell", "shell", and "core". The dye molecules, chelating ligands, and copper ions were applied as the quenchers of Tb(III)-centered luminescence through dynamic or/and static mechanisms. The binding of the quenchers at the silica/water interface results in the quenching of the Tb(III) complexes within SNs, which, in turn, is greatly dependent on the synthetic procedure. The luminescence of "core" SNs remains unchanged under the binding of the quenchers at the silica/water interface. The quenching through dynamic mechanism is more significant for "core-shell" and "shell" than for "core" SNs. Thus, both "core-shell" and "shell" SNs have enough percentage of the Tb(III) complexes located close to the interface for efficient quenching through the energy transfer. The quenching through the ion or ligand exchange is most efficient for "core-shell" SNs due to the greatest percentage of the Tb(III) complexes at the silica/water interface, which correlates with the used synthetic procedure. The highlighted regularities introduce the applicability of "core-shell" SNs used as silica beads for phosphatidylcholine bilayers in sensing their permeability toward the quenching ions.

Luminescent vesicular nanointerface: a highly selective and sensitive "turn-on" sensor for guanosine triphosphate

A novel amphiphilic Tb(3+) complex (TbL(3+)(I)) consisting of a +3 charged head and a hydrophobic alkyl chain has been developed. It spontaneously self-assembles in water and forms stable vesicles at neutral pH. TbL(3+)(I) has no aromatic groups (functioning as an antenna), and its intrinsic luminescence is thus minimized. These features lead to the self-assembling TbL(3+)(I) receptor molecules demonstrating an increased luminescence intensity upon binding of nucleotides. Upon addition of guanosine triphosphate (GTP), the luminescence from Tb(3+) was notably promoted (127-fold), as the light energy absorbed by the guanine group of GTP was efficiently transferred to the Tb(3+) center. In the case of guanosine diphosphate (GDP) and guanosine monophosphate (GMP), respectively, 78-fold and 43-fold increases in luminescence intensity were observed. This enhancement was less significant than that observed for GTP, due to fewer negative charges on GDP and GMP. No other nucleotides or the tested nonphosphorylated nucleosides affected the luminescence intensity to any notable extent. In marked contrast, all tested nucleotides, including guanine nucleotides, barely promoted the luminescence of molecularly dispersed receptors, TbL(3+)(II), indicating that the confinement and organization of molecules in a nanointerface play vital roles in improving the performance of a sensing system. This Tb(3+) complex nanointerface is successfully used for monitoring the GTP-to-GDP conversion.