High-Throughput All-Optical Determination of Nanorod Size and Orientation

As a single-particle characterization technique, optical microscopy has transformed our understanding of structure-function relationships of plasmonic nanoparticles, but the need for ex-situ-correlated electron microscopy to obtain structural information handicaps an otherwise exceptional high-throughput technique. Here, we present an all-optical alternative to electron microscopy to accurately and quickly extract structural information about single gold nanorods (Au NRs) using calcite-assisted localization and kinetics (CLocK) microscopy. Color CLocK images of single Au NRs allow scattering from the longitudinal and transverse plasmon modes to be imaged simultaneously, encoding spectral data in CLocK images that can then be extracted to obtain Au NR size and orientation. Moreover, through the use of convolutional neural networks, Au NR length, width, and aspect ratio can be predicted directly from color CLocK images within ∼10% of the true value measured by electron microscopy.

Microlens-Assisted Light-Scattering Imaging of Plasmonic Nanoparticles at the Single Particle Level

We present a microlens-assisted imaging approach to record the scattering light of plasmonic nanoparticles at the single particle level. The microlens can significantly enhance the backscattering of visible light from individual plasmonic nanoparticles by several dozen folds, and single gold nanoparticles with a diameter as low as 60 nm can be imaged under a conventional optical microscope. This can benefit from a significant increase in the scattering intensity afforded by the microlens, meaning that the imaging of gold nanoparticles at a high temporal resolution (up to 5000 Hz) can be achieved, which is fast enough to record single particle adhesion events on the substrate. This research presents a fast and efficient means of acquiring scattering light from plasmonic nanoparticles, which has great potential to develop plasmonic nanoparticle-based biosensors and investigate a wide range of plasmonic nanoparticle-based fast interaction processes.

Synthesis of Controllable Cu Shells on Au Nanoparticles with Electrodeposition: A Systematic in Situ Single Particle Study

Bimetallic Cu on Au nanoparticles with controllable morphology and optical properties were obtained via electrochemical synthesis. In particular, multilobed structures with good homogeneity were achieved through the optimization of experimental parameters such as deposition current, charge transfer, and metal ion concentration. A hyperspectral dark field scattering setup was used to characterize the electrodeposition on a single particle level, with changes in localized surface plasmon resonance frequency correlated with deposition charge transfer and amount of Cu deposited as determined by electron microscopy. This demonstrated the ability to tune morphology and spectra through electrochemical parameters alone. Time-resolved in situ measurements of single particle spectra were obtained, giving an insight into the kinetics of the deposition process. Nucleation of multiple cubes of Cu initially occurs preferentially on the tips of Au nanoparticles, before growing and coalescing to form a multilobed, lumpy shell. Modifying the surface of Au nanoparticles by plasma treatment resulted in thicker and more uniform Cu shells.

Research on photocatalytic CO2 conversion to renewable synthetic fuels based on localized surface plasmon resonance: current progress and future perspectives

Due to its desirable optoelectronic properties, localized surface plasmon resonance (LSPR) can hopefully play a promising role in photocatalytic CO2 reduction reaction (CO2RR). In this review, mechanisms and applications of LSPR effect in this field are introduced in detail.

Multimode Electron Tomography Sheds Light on Synthesis, Structure, and Properties of Complex Metal-Based Nanoparticles

Electron tomography has become a cornerstone technique for the visualization of nanoparticle morphology in three dimensions. However, to obtain in-depth information about a nanoparticle beyond surface faceting and morphology, different electron microscopy signals must be combined. The most notable examples of these combined signals include annular dark-field scanning transmission electron microscopy (ADF-STEM) with different collection angles and the combination of ADF-STEM with energy-dispersive X-ray or electron energy loss spectroscopies. Here, the experimental and computational development of various multimode tomography techniques in connection to the fundamental materials science challenges that multimode tomography has been instrumental to overcoming are summarized. Although the techniques can be applied to a wide variety of compositions, the study is restricted to metal and metal oxide nanoparticles for the sake of simplicity. Current challenges and future directions of multimode tomography are additionally discussed.

Conformational Selectivity of Merocyanine on Nanostructured Silver Films: Surface Enhanced Resonance Raman Scattering (SERRS) and Density Functional Theoretical (DFT) Study

In this study, detailed structural and vibrational analysis of merocyanine has been investigated using Raman, surface enhanced Raman scattering (SERS) and surface-enhanced resonance Raman scattering (SERRS). The Raman, SERS and SERRS studies aided by density functional theoretical (DFT) calculations clearly established the prevalence of the trans- and cis-conformers of the protonated form of merocyanine (MCH⁺) in solid and acetonitrile solution. The binding characteristics of merocyanine adsorbed on nanostructured silver-coated films (SCFs) were investigated using excitation-dependent SERS, concentration-dependent SERRS and DFT studies. The conformers of merocyanine involved in the surface adsorption processes were recognized. The prominent marker bands observed at 1538 (ethylenic C=C stretch) and 1133 cm⁻¹ (pyridinium C-N stretch) in the Raman spectrum of merocyanine in acetonitrile shifted to 1540 and 1126 cm⁻¹, respectively on the nanostructured SCFs. The shift in the marker bands is associated with either the preferential binding of selective conformer or change in resonance equilibrium between the benzenoid and quinoid forms. The excitation wavelength dependent SERS spectrum infers that in addition to the major contribution from the electromagnetic enhancement, chemical (resonance) effect leads to the amplification of the 1540 cm⁻¹ band. The concentration-dependent SERRS study showed maximum enhancement for the nanostructured SCFs functionalized with 1 μM concentration of merocyanine, indicative of monolayer coverage. For lower concentrations of merocyanine, the SERRS signal intensity reduced without any alteration in the peak positions. The SERRS study thus, revealed sub-nanomolar (0.1 nM) sensing of merocyanine using nanostructured SCFs with the analytical enhancement factor (AEF) of ∼ 10¹⁰ for the 1126 cm⁻¹ and 1540 cm⁻¹ Raman bands for MC concentration of 0.1 nM. In this study, combination of SERRS and DFT have clearly established the predominance of trans-MCH⁺ on the nanostructured silver surface with minor contribution from cis-MCH⁺, which remain exclusively bound to the surface via the phenoxyl ring O atom. This conformational surface selectivity of geometrical isomers of merocyanine using nanostructured surfaces can be further explored for energy efficient and economical separation of geometrical isomers.

Characterization of an aerosolized nanoparticle beam beyond the diffraction limit through strong field ionization

The study of nanomaterials is an active area of research for technological applications as well as fundamental science. A common method for studying properties of isolated nanoparticles is by an in-vacuum particle beam produced via an aerodynamic lens. Despite being common practice, characterization of such beams has proven difficult as light scattering detection techniques fail for particles with sizes beyond the diffraction limit. Here we present a new technique for characterizing such nanoparticle beams using strong field ionization. By focusing an ultrafast, mJ-level laser into the particle beam, a nanoparticle within the laser focus is ionized and easily detected by its ejected electrons. This method grants direct access to the nanoparticle density at the location of the focus, and by scanning the focus through the transverse and longitudinal profiles of the particle beam we attain the 3-dimensional particle density distribution for a cylindrically symmetric beam. Further, we show that strong field ionization is effective in detecting spherical nanoparticles as small as 10 nm in diameter. Additionally, this technique is an effective tool in optimizing the particle beam for specific applications. As an example we show that the particle beam density and width can be manipulated by restricting the gas flow into the aerodynamic lens.

Correlating structure, morphology and properties of metal nanostructures by combining single-particle optical spectroscopy and electron microscopy

The nanoscale morphology of metal nanostructures directly defines their optical, catalytic and electronic properties and even small morphological changes can cause significant property variations. On the one hand, this dependence allows for precisely tuning and exploring properties by shape engineering; next to advanced synthesis protocols, post-synthesis modification through tailored laser modification has become an emerging tool to do so. On the other hand, with this interconnection also comes the quest for detailed structure-property correlation and understanding of laser-induced reshaping processes on the individual nanostructure level beyond ensemble averages. With the development of single-particle (ultrafast) optical spectroscopy techniques and advanced electron microscopy such understanding can in principle be gained at the femtosecond temporal and atomic spatial scale, respectively. However, accessing both on the same individual nanostructure is far from straightforward as it requires the combination of optical spectroscopy and electron microscopy. In this Minireview, we highlight key studies from recent years that performed such correlative measurements on the same individual metal nanostructure either in a consecutive ex situ manner or in situ inside the electron microscope. We demonstrate that such a detailed correlation is critical for revealing the full picture of the structure-property relationship and the physics behind light-induced nanostructure modifications. We put emphasis on the advantages and disadvantages of each methodology as well as on the unique information that one can gain only by correlative studies performed on the same individual nanostructure and end with an outlook on possible further development of this field in the near future.

Optical Microscopy Systems for the Detection of Unlabeled Nanoparticles

Label-free detection of nanoparticles is essential for a thorough evaluation of their cellular effects. In particular, nanoparticles intended for medical applications must be carefully analyzed in terms of their interactions with cells, tissues, and organs. Since the labeling causes a strong change in the physicochemical properties and thus also alters the interactions of the particles with the surrounding tissue, the use of fluorescently labeled particles is inadequate to characterize the effects of unlabeled particles. Further, labeling may affect cellular uptake and biocompatibility of nanoparticles. Thus, label-free techniques have been recently developed and implemented to ensure a reliable characterization of nanoparticles.

This review provides an overview of frequently used label-free visualization techniques and highlights recent studies on the development and usage of microscopy systems based on reflectance, darkfield, differential interference contrast, optical coherence, photothermal, holographic, photoacoustic, total internal reflection, surface plasmon resonance, Rayleigh light scattering, hyperspectral and reflectance structured illumination imaging. Using these imaging modalities, there is a strong enhancement in the reliability of experiments concerning cellular uptake and biocompatibility of nanoparticles, which is crucial for preclinical evaluations and future medical applications.

Comparison of Aerosol Pt, Au and Ag Nanoparticles Agglomerates Laser Sintering

In this paper, we investigated the interaction of nanosecond pulsed-periodic infrared (IR) laser radiation at a 50 and 500 Hz repetition rate with aerosol platinum (Pt) and silver (Ag) nanoparticles agglomerates obtained in a spark discharge. Results showed the complete transformation of Pt dendrite-like agglomerates with sizes of 300 nm into individual spherical nanoparticles directly in a gas flow under 1053 nm laser pulses with energy density 3.5 mJ/cm². Notably, the critical energy density required for this process depended on the size distribution and extinction of agglomerates nanoparticles. Based on the extinction cross-section spectra results, Ag nanoparticles exhibit a weaker extinction in the IR region in contrast to Pt, so they were not completely modified even under the pulses with energy density up to 12.7 mJ/cm². The obtained results for Ag and Pt laser sintering were compared with corresponding modification of gold (Au) nanoparticles studied in our previous work. Here we considered the sintering mechanisms for Ag, Pt and Au nanoparticles agglomerates in the aerosol phase and proposed the model of their laser sintering based on one-stage for Pt agglomerates and two-stage shrinkage processes for Au and Ag agglomerates.

Evolution of Electronic State and Properties of Silver Nanoparticles during Their Formation in Aqueous Solution

The electron density of a nanoparticle is a very important characteristic of the properties of a material. This paper describes the formation of silver nanoparticles (NPs) and the variation in the electronic state of an NP's surface upon the reduction in Ag⁺ ions with oxalate ions, induced by UV irradiation. The calculations were based on optical spectrophotometry data. The NPs were characterized using Transmission electron microscopy and Dynamic light scattering. As ~10 nm nanoparticles are formed, the localized surface plasmon resonance (LSPR) band increases in intensity, decreases in width, and shifts to the UV region from 402 to 383 nm. The interband transitions (IBT) band (≤250 nm) increases in intensity, with the band shape and position remaining unchanged. The change in the shape and position of the LSPR band of silver nanoparticles in the course of their formation is attributable to an increasing concentration of free electrons in the particles as a result of a reduction in Ag⁺ ions on the surface and electron injection by CO2- radicals. The ζ-potential of colloids increases with an increase in electron density in silver nuclei. A quantitative relationship between this shift and electron density on the surface was derived on the basis of the Mie-Drude theory. The observed blue shift (19 nm) corresponds to an approximately 10% increase in the concentration of electrons in silver nanoparticles.

Single-nanoparticle spectroelectrochemistry studies enabled by localized surface plasmon resonance

This review describes recent progress of spectroelectrochemistry (SEC) analysis of single metallic nanoparticles (NPs) which have strong surface plasmon resonance properties. Dark-field scattering (DFS), photoluminescence (PL), and electrogenerated chemiluminescence (ECL) are three commonly used optical methods to detect individual NPs and investigate their local redox activities in an electrochemical cell. These SEC methods are highly dependent on a strong light-scattering cross-section of plasmonic metals and their electrocatalytic characteristics. The surface chemistry and the catalyzed reaction mechanism of single NPs and their chemical transformations can be studied using these SEC methods. Recent progress in the experimental design and fundamental understanding of single-NP electrochemistry and catalyzed reactions using DFS, PL, and ECL is described along with selected examples from recent publications in this field. Perspectives on the challenges and possible solutions for these SEC methods and potential new directions are discussed.

Advanced Nanoporous Anodic Alumina-Based Optical Sensors for Biomedical Applications

Close-packed hexagonal array nanopores are widely used both in research and industry. A self-ordered nanoporous structure makes anodic aluminum oxide (AAO) one of the most popular nanomaterials. This paper describes the main formation mechanisms for AAO, the AAO fabrication process, and optical sensor applications. The paper is focused on four types of AAO-based optical biosensor technology: surface-Enhanced Raman Scattering (SERS), surface Plasmon Resonance (SPR), reflectometric Interference Spectroscopy (RIfS), and photoluminescence Spectroscopy (PL). AAO-based optical biosensors feature very good selectivity, specificity, and reusability.

Colloidal particle aggregation: mechanism of assembly studied via constructal theory modeling

The assembly of colloidal particles into ordered structures is of great importance to a variety of nanoscale applications where the precise control and placement of particles is essential. A fundamental understanding of this assembly mechanism is necessary to not only predict, but also to tune the desired properties of a given system. Here, we use constructal theory to develop a theoretical model to explain this mechanism with respect to van der Waals and double layer interactions. Preliminary results show that the particle aggregation behavior depends on the initial lattice configuration and solvent properties. Ultimately, our model provides the first constructal framework for predicting the self-assembly of particles and could be expanded upon to fit a range of colloidal systems.

Imaging Plasmons with Sub-2 nm Spatial Resolution via Tip-Enhanced Four-Wave Mixing

Four-wave mixing at plasmonic tip-sample nanojunctions may be used to visualize plasmonic fields with sub-2 nm spatial resolution under ambient laboratory conditions. We illustrate the latter using a gold-coated atomic force microscopy probe irradiated with a pair of near-infrared femtosecond laser pulses and used to image plasmonic gold nanoplates and silver nanocubes. Through diagnostic polarization-dependent tip-only measurements, we illustrate that the four-wave mixing signal is localized to the tip apex. The apex-bound signal is further enhanced when the tip is located at specific locations near plasmonic nanoparticles. Overall, this work paves the way for visualizing chemical transformations as well as coherent electronic and vibrational dynamics with joint femtosecond temporal and few-nanometer spatial resolution under ambient conditions.

Single plasmonic nanostructures for biomedical diagnosis

The field of single nanoparticle plasmonics has grown enormously. There is no doubt that a wide diversity of the nanoplasmonic techniques and nanostructures represents a tremendous opportunity for fundamental biomedical studies as well as sensing and imaging applications. Single nanoparticle plasmonic biosensors are efficient in label-free single-molecule detection, as well as in monitoring real-time binding events of even several biomolecules. In the present review, we have discussed the prominent advantages and advances in single particle characterization and synthesis as well as new insight into and information on biomedical diagnosis uniquely obtained using single particle approaches. The approaches include the fundamental studies of nanoplasmonic behavior, two typical methods based on refractive index change and characteristic light intensity change, exciting innovations of synthetic strategies for new plasmonic nanostructures, and practical applications using single particle sensing, imaging, and tracking. The basic sphere and rod nanostructures are the focus of extensive investigations in biomedicine, while they can be programmed into algorithmic assemblies for novel plasmonic diagnosis. Design of single nanoparticles for the detection of single biomolecules will have far-reaching consequences in biomedical diagnosis.

Photocatalytic Surface Restructuring in Individual Silver Nanoparticles

Light absorption and scattering by metal nanoparticles can drive catalytic reactions at their surface via the generation of hot charge carriers, elevated temperatures, and focused electromagnetic fields. These photoinduced processes can substantially alter the shape, surface structure, and oxidation state of surface atoms of the nanoparticles and therefore significantly modify their catalytic properties. Information on such local structural and chemical change in plasmonic nanoparticles is however blurred in ensemble experiments, due to the typical large heterogeneity in sample size and shape distributions. Here, we use single-particle dark-field and Raman scattering spectroscopy to elucidate the reshaping and surface restructuring of individual silver nanodisks under plasmon excitation and during photocatalytic CO₂ hydrogenation. We show that silver nanoparticles reshape significantly in inert N₂ atmosphere, due to photothermal effects. Furthermore, by collecting the inelastic scattering during laser irradiation in a reducing gas environment, we observe intermittent light emission from silver clusters transiently formed at the nanoparticle surface. These clusters are likely to modify the photocatalytic activity of silver nanodisks and to enable detection of reaction products by enhancing their Raman signal. Our results highlight the dynamic nature of the catalytic surface of plasmonic silver nanoparticles and demonstrate the power of single-particle spectroscopic techniques to unveil their structure–activity relationship both in situ and in real time.

Review of Integrated Optical Biosensors for Point-Of-Care Applications

This article reviews optical biosensors and their integration with microfluidic channels. The integrated biosensors have the advantages of higher accuracy and sensitivity because they can simultaneously monitor two or more parameters. They can further incorporate many functionalities such as electrical control and signal readout monolithically in a single semiconductor chip, making them ideal candidates for point-of-care testing. In this article, we discuss the applications by specifically looking into point-of-care testing (POCT) using integrated optical sensors. The requirement and future perspective of integrated optical biosensors for POC is addressed.

Silver nanoparticle on aluminum mirror: active spectroscopy and decay rate enhancement

Recent advances in nanotechnology and optics have paved the way for new plasmonic devices. One of them are nanopatch antennas that are simple and, at the same time, effective devices for localizing the electromagnetic field on a scale of less than 10 nm and can be used in photonic integrated circuits as effective sources of photons, including single-photon sources. In the present study, we investigate the radiative characteristics of a submonolayer of colloidal CdSe/CdS quantum dots that form island structures in a resonator: a cubic silver nanoparticle on an aluminum mirror. For detecting plasmonic nanoparticles on glass or metal surfaces, we propose a new technique involving a tunable laser and a confocal microscope. We provide a comparative study of the luminescence enhancement factors for QDs in the NPAs upon off-resonance excitation and at a wavelength close to the resonance; a significant difference in the luminescence enhancement factors (by order of magnitude) is demonstrated. A 60-fold reduction in the spontaneous emission time, as well as an increase in the radiation intensity by a factor of 330, has been obtained in the experiments. The increase in the spontaneous emission rate demonstrated for the quantum dots is explained by the Purcell effect. Full-wave simulations of electromagnetic fields were carried out for the model of the developed nanopatch antenna; luminescence enhancement factors and radiative efficiencies were calculated as well.

Plasmonic Assemblies for Real-Time Single-Molecule Biosensing

Their tunable optical properties and versatile surface functionalization have sparked applications of plasmonic assemblies in the fields of biosensing, nonlinear optics, and photonics. Particularly, in the field of biosensing, rapid advances have occurred in the use of plasmonic assemblies for real-time single-molecule sensing. Compared to individual particles, the use of assemblies as sensors provides stronger signals, more control over the optical properties, and access to a broader range of timescales. In the past years, they have been used to directly reveal single-molecule interactions, mechanical properties, and conformational dynamics. This review summarizes the development of real-time single-molecule sensors built around plasmonic assemblies. First, a brief overview of their optical properties is given, and then recent applications are described. The current challenges in the field and suggestions to overcome those challenges are discussed in detail. Their stability, specificity, and sensitivity as sensors provide a complementary approach to other single-molecule techniques like force spectroscopy and single-molecule fluorescence. In future applications, the impact in real-time sensing on ultralong timescales (hours) and ultrashort timescales (sub-millisecond), time windows that are difficult to access using other techniques, is particularly foreseen.

Shapes, Plasmonic Properties, and Reactivity of Magnesium Nanoparticles

Localized surface plasmon resonances have attracted much attention due to their ability to enhance light-matter interactions and manipulate light at the subwavelength level. Recently, alternatives to the rare and expensive noble metals Ag and Au have been sought for more sustainable and large-scale plasmonic utilization. Mg supports plasmon resonances, is one of the most abundant elements in earth's crust, and is fully biocompatible, making it an attractive framework for plasmonics. This feature article first reports the hexagonal, folded, and kite-like shapes expected theoretically from a modified Wulff construction for single crystal and twinned Mg structures and describes their excellent match with experimental results. Then, the optical response of Mg nanoparticles is overviewed, highlighting Mg's ability to sustain localized surface plasmon resonances across the ultraviolet, visible, and near-infrared electromagnetic ranges. The various resonant modes of hexagons, leading to the highly localized electric field characteristic of plasmonic behavior, are presented numerically and experimentally. The evolution of these modes and the associated field from hexagons to the lower symmetry folded structures is then probed, again by matching simulations, optical, and electron spectroscopy data. Lastly, results demonstrating the opportunities and challenges related to the high chemical reactivity of Mg are discussed, including surface oxide formation and galvanic replacement as a synthetic tool for bimetallics. This Feature Article concludes with a summary of the next steps, open questions, and future directions in the field of Mg nanoplasmonics.

Effect of chemisorbed thiophenols with an electron donating group on surface-enhanced Raman scattering of gold nanorods

Surface-enhanced Raman scattering (SERS) is a powerful technique to amplify the weak Raman scattering intensity by molecules chemisorbed on a metallic surface. Herein, we present the interfacial electronic effect of para-substituted aromatic thiophenols (TPs) with an electron donating group (EDG) on SERS of anisotropic gold nanorods (AuNRs) under resonant conditions. Probe molecules with an EDG showed great SERS enhancement in AuNRs at the resonant excitation wavelength. We found that the SERS enhancement with an EDG is caused by the formation of aggregates through intermolecular interactions among probe molecules, such as dimerization with hydrogen bonding via an amino group (-NH2) of p-aminothiophenol (p-ATP) and hydroxyl group (-OH) of p-mercaptophenol (p-MP), resulting in hot-spots between AuNRs. Furthermore, SERS having a stronger EDG (-NH2, p-ATP) with the Hammett constant of -0.66 exhibited greater enhancement than p-MP having hydroxyl (-OH) groups with the Hammett constant of -0.37. We found that the greater enhancement is ascribed to the temporary formation of a positively charged electron withdrawing group (-NH3+) in p-ATP, unlike p-MP, via the interaction of the lone pair of the amino group (-NH2) with ethanol. Therefore, this investigation provides new insightful experimental observations on SERS enhancement of probe molecules with an EDG.

Ultrafast Photoemission Electron Microscopy: Imaging Plasmons in Space and Time

Plasmonics is a rapidly growing field spanning research and applications across chemistry, physics, optics, energy harvesting, and medicine. Ultrafast photoemission electron microscopy (PEEM) has demonstrated unprecedented power in the characterization of surface plasmons and other electronic excitations, as it uniquely combines the requisite spatial and temporal resolution, making it ideally suited for 3D space and time coherent imaging of the dynamical plasmonic phenomena on the nanofemto scale. The ability to visualize plasmonic fields evolving at the local speed of light on subwavelength scale with optical phase resolution illuminates old phenomena and opens new directions for growth of plasmonics research. In this review, we guide the reader thorough experimental description of PEEM as a characterization tool for both surface plasmon polaritons and localized plasmons and summarize the exciting progress it has opened by the ultrafast imaging of plasmonic phenomena on the nanofemto scale.

Quantitative optical microspectroscopy, electron microscopy, and modelling of individual silver nanocubes reveal surface compositional changes at the nanoscale

The optical response of metal nanoparticles is governed by plasmonic resonances, which depend often intricately on the geometry and composition of the particle and its environment. In this work we describe a method and analysis pipeline unravelling these relations at the single nanoparticle level through a quantitative characterization of the optical and structural properties. It is based on correlating electron microscopy with microspectroscopy measurements of the same particle immersed in media of different refractive indices. The optical measurements quantify the magnitude of both the scattering and the absorption cross sections, while the geometry measured in electron microscopy is used for numerical simulations of the cross section spectra accounting for the experimental conditions. We showcase the method on silver nanocubes of nominal 75 nm edge size. The large amount of information afforded by the quantitative cross section spectra and measuring the same particle in two environments, allows us to identify a specific degradation of the cube surface. We find a layer of tarnish, only a few nanometers thick, a fine surface compositional change of the studied system which would be hardly quantifiable otherwise.

Optical sensors based on silver nanoparticles for determination of pharmaceuticals: An overview of advances in the last decade

This review focuses on optical nanosensors based on silver nanoparticles (Ag NPs) and demonstrates their applications in the determination of pharmaceutical compounds in the last decade. Such optical sensors have received high attention in the analytical field owing to their low cost and simplicity since they do not require any complex or expensive instrumentation. This article reviews Ag NP-based optical methods for the determination of pharmaceutical compounds from 2010 to 2020. The reported optical methods are classified into four types: spectrophotometry, spectrofluorimetry, scattering and chemiluminescence. Ag NPs play different roles in the different sensing platforms used by these methods, the details of which are carefully explained in this review. Moreover, the relevant analytical parameters of the developed methods are categorized by role and tabulated. It is hoped that this review will stimulate further research in this field with similar nanostructures.

Spatio-Spectral Characterization of Multipolar Plasmonic Modes of Au Nanorods via Tip-Enhanced Raman Scattering

Tip-enhanced Raman (TER) spectral images of 4-thiobenzonitrile-coated Au nanorods map the spatial profiles and trace the resonances of dipolar and multipolar plasmonic modes that are characteristic of the imaged particles. For any particular rod, we observe sequential transitions between high-order modes at low frequency shifts and lower-order modes at higher frequencies. We also notice that higher-order modes (up to m = 4) are generally observed for long rods as compared to their shorter analogues, where longitudinal dipolar resonances (m = 1) are observable. In effect, this work adds a new dimension to local optical field mapping via TERS, which we have previously explored. Not only can the magnitudes, vector components, local/nonlocal characters of local optical fields be imaged through molecular TERS, but spatially varying local optical resonances are also direct observables.

Tip-Enhanced Raman Nanospectroscopy of Smooth Spherical Gold Nanoparticles

We record nanoscale-resolved chemical images of thiobenzonitrile (TBN)-functionalized smooth gold nanospheres on silicon via tip-enhanced Raman (TER) nanospectroscopy. The recorded images trace the nascence of the familiar doughnut-shaped scattering profile of nanoparticles on silicon at its origin (the particle surface), which appears as a horseshoe-shaped scattering pattern under our experimental conditions. The local optical field maps are in agreement with their simulated finite-difference time-domain analogues. Analysis of the recorded spectra with the aid of ab-initio-molecular-dynamics-based Raman spectral simulations further suggests that optical rectification and molecular charging take place throughout the course of atomic-force-microscopy-based TER nanoscale chemical imaging.

Surface-enhanced spatially-offset Raman spectroscopy (SESORS) for detection of neurochemicals through the skull at physiologically relevant concentrations

Detection techniques for neurotransmitters that are rapid, label-free, and non-invasive are needed to move towards earlier diagnosis of neurological disease.

High Spatial Resolution Mapping of Localized Surface Plasmon Resonances in Single Gallium Nanoparticles

Plasmonics has emerged as an attractive field driving the development of optical systems in order to control and exploit light-matter interactions. The increasing interest around plasmonic systems is pushing the research of alternative plasmonic materials, spreading the operability range from IR to UV. Within this context, gallium appears as an ideal candidate, potentially active within a broad spectral range (UV-VIS-IR), whose optical properties are scarcely reported. Importantly, the smart design of active plasmonic materials requires their characterization at high spatial and spectral resolution to access the optical fingerprint of individual nanostructures, attainable by transmission electron microscopy techniques (i.e., by means of electron energy-loss spectroscopy, EELS). Therefore, the optical response of individual Ga nanoparticles (NPs) by means of EELS measurements is analyzed, in order to spread the understanding of the plasmonic response of Ga NPs. The results show that single Ga NPs may support several plasmon modes, whose nature is extensively discussed.

Quantitative Measurement of the Optical Cross Sections of Single Nano-objects by Correlative Transmission and Scattering Microspectroscopy

The scattering and absorption of light by nano-objects is a key physical property exploited in many applications, including biosensing and photovoltaics. Yet, its quantification at the single object level is challenging and often requires expensive and complicated techniques. We report a method based on a commercial transmission microscope to measure the optical scattering and absorption cross sections of individual nano-objects. The method applies to microspectroscopy and wide-field image analysis, offering fine spectral information and high throughput sample characterization. Accurate cross-section determination requires detailed modeling of the measurement, which we develop, accounting for the geometry of the illumination and detection as well as for the presence of a sample substrate. We demonstrate the method on three model systems (gold spheres, gold rods, and polystyrene spheres), which include metallic and dielectric particles, spherical and elongated, placed in a homogeneous medium or on a dielectric substrate. Furthermore, by comparing the measured cross sections with numerical simulations, we are able to determine structural parameters of the studied system, such as the particle diameter and aspect ratio. Our method therefore holds the potential to complement electron microscopy as a simpler and cost-effective tool for structural characterization of single nano-objects.

Supercharging Superlocalization Microscopy: How Electrochemical Charging of Plasmonic Nanostructures Uncovers Hidden Heterogeneity

Superlocalization microscopy enables the position of single plasmonic nanoparticles to be determined with <25 nm precision, enabling single-nanoparticle tracking and super-resolution imaging experiments to be conducted with sub-diffraction-limited spatial resolution. In many of these applications, the superlocalized position of the nanoparticle is assumed to correspond to the geometric center of the nanoparticle. However, work reported by Wang and co-workers in this issue of ACS Nano suggests that this assumption can be incorrect, based on studies in which electrochemically charging a nanoparticle leads to reproducible shifts in its scattering center. The shift is believed to originate from nonuniform charge accumulation in the nanoparticle, due to the inherent heterogeneity in nanoparticle surface properties. This Perspective explores the implications of this result, both for using this shift to probe dynamic changes in nanoparticle surface chemistry as well as for exploiting nonuniform charge accumulation to promote site-specific chemical reactions.

Controlled Two-Step Formation of Faceted Perovskite Rare-Earth Scandate Nanoparticles

A general approach to the formation of well-faceted nanoparticles is discussed and successfully applied to the production of several rare-earth scandates. Two steps were used, with higher temperatures first to nucleate the perovskite phase, followed by lower temperatures to smooth the particle surfaces. Exploiting these two different regimes led to smaller nanoparticles with more faceting. This general approach may be tailored to other material systems as a step towards producing shape-controlled nanoparticles for a desired application.

Coupling of Surface Plasmon Modes and Refractive Index Sensitivity of Hollow Silver Nanoprism

Localized surface plasmon (LSP) modes depend strongly on the morphology of nanoparticle and the surrounding dielectric medium. The hollow nanostructure provides a new way to modulate the surface plasmon modes due to the additional cavity surface. In this work, we study systematically the multipolar surface plasmon modes of hollow silver nanoprism (HSN) by simulation of electron energy loss spectroscopy (EELS) spectra based on the boundary element method (BEM). Herein the effects of the cavity size and position are taken into account. The LSP modes of HSNs are compared with those of perfect silver nanoprism (SN). The red-shift behaviors of multipolar modes can be found as increasing the cavity size. Modes A and C have similar red-shift tendency and obey the plasmon ruler equation, which can be explained by dipole-dipole coupling mode. Meanwhile, the degenerate modes will be split by changing the cavity position, and opposite shift tendencies of split degenerate states are observed. These are caused by different coupling nature of degenerate modes. Moreover, high refractive index sensitivity (RIS) can be obtained for HSN by changing the cavity size and position.

High-Pressure Effect on the Optical Extinction of a Single Gold Nanoparticle

When reducing the size of a material from bulk down to nanoscale, the enhanced surface-to-volume ratio and the presence of interfaces make the properties of nano-objects very sensitive not only to confinement effects but also to their local environment. In the optical domain, the latter dependence can be exploited to tune the plasmonic response of metal nanoparticles by controlling their surroundings, notably applying high pressures. To date, only a few optical absorption experiments have demonstrated this feasibility, on ensembles of metal nanoparticles in a diamond anvil cell. Here, we report a nontrivial combination between a spatial modulation spectroscopy microscope and an ultraflat diamond anvil cell, allowing us to quantitatively investigate the high-pressure optical extinction spectrum of an individual nano-object. A large tuning of the surface plasmon resonance of a gold nanobipyramid is experimentally demonstrated up to 10 GPa, in quantitative agreement with finite-element simulations and an analytical model disentangling the impact of metal and local environment dielectric modifications. High-pressure optical characterizations of single nanoparticles allow for the accurate investigation and modeling of size, strain, and environment effects on physical properties of nano-objects and also enable fine-tuned applications in nanocomposites, nanoelectromechanical systems, or nanosensing devices.

Horizontal Plasmonic Ruler Based on the Scattering Far-Field Pattern

A novel method is proposed to detect the horizontal shift of a specific nanoblock relative to a reference nanoblock using surface plasmon modes at nanometer resolution. To accomplish this task, two orthogonal localized surface plasmon resonances were excited within the air gap region between the silver nanoblocks at the respective wavelengths, 890 nm, and 1100 nm. This technique utilized the scattering far-field intensities of the two block nanostructures at the two specific wavelengths at two specific directional spots. The ratio of the scattering intensities at the two spots changed according to the horizontal shift of the block that moved. Correspondingly, this ratio can be used to provide the precise location of the block. This method can be applied to many fields, including label-free bio-sensing, bio-analysis and alignment during nano-fabrication, owing to the high resolution and simplicity of the process.

Single gold bipyramids on a silanized substrate as robust plasmonic sensors for liquid environments

Sensitive, robust and stable sensors are required to bring biosensing techniques from the forefront of research to clinical and commercial settings. To this end, we report on the development of new robust plasmonic sensors consisting of gold nano-bipyramids (BPs) grafted to a glass substrate via silanization, associated with a novel setup based on Spatial Modulation Spectroscopy allowing the measurement of the optical response of individual nano-objects in a liquid environment. We thereby show that changes in the refractive index of the medium around individual silanized BPs can be detected by measuring their plasmonic shift with sensitivities comparable to values reported elsewhere and in good agreement with theoretical calculations. The optical response is furthermore shown to be stable and robust allowing for repeated measurements in different media and storage over many months. This work opens up new perspectives in the field of plasmonic bio-sensing as our setup is readily adaptable to dynamic liquid measurements and a wide range of applications such as the detection of clinically important analytes or pollutants in water.

Homogeneous localized surface plasmon resonance inflection points for enhanced sensitivity and tracking plasmon damping in single gold bipyramids

The most polarizable localized surface plasmon resonance (LSPR) longitudinal mode of anisotropic metallic nanoparticles, such as gold bipyramids (AuBPs), is of high prominence. This optical response has tremendous applications from spectroscopy to photonics and energy devices to sensing. In conventional LSPR-based sensing, broadening and asymmetry in peaks due to chemical and instrument noise hinder obtaining a precise insight on shift positions, accordingly limiting the effectiveness and impact of LSPR sensors. Further, when investigating LSPR properties, utilizing more simplistic frequency dependent dielectric-type models can aberrantly impact the reliability of fundamental properties used for designing and fabricating efficient optical devices. For instance, more approximations can effectively limit screening intra-band and inter-band (IB) electronic transition contributions and other related optical properties. With an aim to find alternative methods to further improve their efficiency, as a first report, we devoted a particular focus on LSPR scattering inflection points (IFs) of single AuBPs. The findings reveal that tracking LSPR IFs exhibit high sensitivity over their counterpart LSPR peak shift locations. In addition, we newly detected IB transition contributions near the resonance energy in the range (1.50 eV-2.00 eV) dominated by intra-band transitions. A small increase in the local RI effectively enhances the LSPR quality factor due to IB transitions. Therefore, while neglecting IB transitions in the range below 2.4 eV can work for local air refractive index (RI), in high local RI media it can be aberrantly underestimated. Demonstrated by the use of the dielectric function based on Kramers-Kronig consistent Lorentz oscillators, our findings are in good agreement with the enhancing RI sensitivity effect. The results of this investigation support the idea that tracking curvature changes of an optical signal can be effectively used for LSPR longitudinal peak RI sensing as well as damping in the local RI environment of a single AuBP.

Magnesium Nanoparticle Plasmonics

Nanoparticles of some metals (Cu/Ag/Au) sustain oscillations of their electron cloud called localized surface plasmon resonances (LSPRs). These resonances can occur at optical frequencies and be driven by light, generating enhanced electric fields and spectacular photon scattering. However, current plasmonic metals are rare, expensive, and have a limited resonant frequency range. Recently, much attention has been focused on earth-abundant Al, but Al nanoparticles cannot resonate in the IR. The earth-abundant Mg nanoparticles reported here surmount this limitation. A colloidal synthesis forms hexagonal nanoplates, reflecting Mg's simple hexagonal lattice. The NPs form a thin self-limiting oxide layer that renders them stable suspended in 2-propanol solution for months and dry in air for at least two week. They sustain LSPRs observable in the far-field by optical scattering spectroscopy. Electron energy loss spectroscopy experiments and simulations reveal multiple size-dependent resonances with energies across the UV, visible, and IR. The symmetry of the modes and their interaction with the underlying substrate are studied using numerical methods. Colloidally synthesized Mg thus offers a route to inexpensive, stable nanoparticles with novel shapes and resonances spanning the entire UV-vis-NIR spectrum, making them a flexible addition to the nanoplasmonics toolbox.

Electromagnetic Nanoparticles for Sensing and Medical Diagnostic Applications

A modeling and design approach is proposed for nanoparticle-based electromagnetic devices. First, the structure properties were analytically studied using Maxwell's equations. The method provides us a robust link between nanoparticles electromagnetic response (amplitude and phase) and their geometrical characteristics (shape, geometry, and dimensions). Secondly, new designs based on "metamaterial" concept are proposed, demonstrating great performances in terms of wide-angle range functionality and multi/wide behavior, compared to conventional devices working at the same frequencies. The approach offers potential applications to build-up new advanced platforms for sensing and medical diagnostics. Therefore, in the final part of the article, some practical examples are reported such as cancer detection, water content measurements, chemical analysis, glucose concentration measurements and blood diseases monitoring.

Mapping the refractive index with single plasmonic nanoantenna

As the size of the state-of-the-art optical devices shrinks to nanoscale, the need for tools allowing mapping the local optical properties at deep sub-diffraction resolution increases. Here we demonstrate successful mapping the variations of the refractive index of a smooth dielectric surface by detecting spectral response of a single spherical-shape Ag nanoparticle optically aligned with a supporting optical fiber axicon microlens. We propose and examine various excitation schemes of the plasmonic nanoantenna to provide efficient interaction of its dipolar and quadrupolar modes with the underlying sample surface and to optimize the mapping resolution and sensitivity. Moreover, we demonstrate an lithography-free approach for fabrication of the scanning probe combining the high-quality fiber microaxicon with the Ag spherical nanoparticle atop. Supporting finite-difference time-domain calculations are undertaken to tailor the interaction of the plasmonic nanoantenna and the underlying dielectric substrate upon various excitation conditions demonstrating good agreement with our experimental findings and explaining the obtained results.

Mechanism of hydrogen adsorption on gold nanoparticles and charge transfer probed by anisotropic surface plasmon resonance

The adsorption of hydrogen on Au nanoparticles (NPs) of size of the order of 10 nm has been investigated by use of localised surface plasmon resonances (LSPR) in the NPs. The samples, formed by Au NPs obtained by oblique angle deposition on glass substrates, display a strong optical dichroism due to two different plasmon resonances dependent on the polarisation of light. This ensured the use of Transmittance Anisotropy Spectroscopy, a sensitive derivative optical technique, which permitted one to measure shifts of the LSPR as small as 0.02 nm upon H adsorption, which are not accessible by conventional plasmonic methods. The measured signal is proportional to the area of the NPs, which shows that H atoms diffuse on their facets. A negative charge transfer from Au to H is clearly demonstrated.

Controlled assembly of metal colloids on dye-doped silica particles to tune the photophysical properties of organic molecules

The additive and optimised assembly of gold nanoparticles on the surface of dye-doped silica enables the modulation of the photophysical behaviour of organic molecules.