Highly luminescent S, N co-doped graphene quantum dots with broad visible absorption bands for visible light photocatalysts

A pH-responsive novel delivery system utilizing carbon quantum dots loaded with PT2385 for targeted inhibition of HIF-2α in the treatment of osteoarthritis

BACKGROUND

Osteoarthritis (OA) is a progressive joint disorder marked by the degradation of cartilage. Elevated concentrations of hypoxia-inducible factor-2α (HIF-2α) are intricately linked to the pathological development of OA. PT2385 has demonstrated effective inhibition of HIF-2α, thereby potentially impeding the initial advancement of OA. Nevertheless, challenges persist, including limited penetration into the deeper layers of cartilage, issues related to charge rejection, and a heightened rate of clearance from the joint. These constraints necessitate further consideration and exploration.

METHODS

It has been demonstrated that PT2385 exhibits efficient inhibition of HIF-2α expression, thereby contributing to the delay in the progression of osteoarthritis. The pH-responsive attributes of carbon quantum dots, specifically those employing m-phenylenediamine (m-CQDs) coated with bovine serum albumin (BSA), have been systematically evaluated. In both in vitro settings involving cartilage explants and in vivo experiments, the efficacy of BSA-m-CQDs-PT2385 (BCP) has been confirmed in facilitating the transport of PT2385 to the middle and deep layers of cartilage. Furthermore, the BCP system demonstrates controlled drug release contingent upon alterations in environmental pH.

RESULTS

While the use of PT2385 alone provides protective effects on chondrocytes within an inflamed environment, there exists an opportunity for further enhancement in its efficacy when administered via intra-articular injection. The BCP formulation, characterized by appropriate particle size and charge, facilitates seamless penetration into cartilage tissue. Additionally, BCP demonstrates the capability to release drugs in response to changes in environmental pH. In vitro experiments reveal that BCP effectively inhibits Hif-2α expression and catabolic factors in chondrocytes. Notably, cartilage explants and in vivo experiments indicate that BCP surpasses PT2385 alone in inhibiting the expression of HIF-2α and matrix metalloproteinase 13, particularly in the middle and deep layers.

CONCLUSIONS

The BCP drug delivery system exhibits selective release of PT2385 in response to pH changes occurring during the progression of osteoarthritis (OA), thereby inhibiting HIF-2α expression deep within the cartilage. The use of BCP significantly augments the capacity of PT2385 to retard both cartilage degeneration and the progression of osteoarthritis. Consequently, BCP as an innovative approach utilizing m-CQDs to deliver PT2385 into articular cartilage, shows potential for treating osteoarthritis.This strategy opens new avenues for osteoarthritis treatment.

Fabrication and Efficient Interfacial Assembly of Bright Red-Emitting Carbon Quantum Dots for Security-Warning Textiles

Carbon quantum dots (CQDs) have attracted more attentions due to their multiple performances. However, the fabrication of long-wavelength emitting CQDs with aliphatic precursors still remains a challenge, mainly because it is difficult to generate large sp2 domains to reduce energy gap, which is not conducive to a redshift of the luminescence peak. Hereon, by regulating the pH of citric acid and thiourea mixture, a N, S co-doped CQD emitting bright red fluorescence at 635 nm is successfully fabricated through the solvothermal reaction under acidic condition, achieving a high quantum yield of 32.66%. Solvatochromic effects of the CQDs are discussed through theoretical equations and models, which confirm that the hydrogen-bonding interaction dominates the fluorescence emission behavior of CQDs in polar solvents. Besides, a feasible strategy is proposed to prepare an anti-counterfeiting textile via the deposition of red-emitting CQDs onto cotton fibers, through rapidly evaporating the preferred organic solvent. As expected, the CQD-decorated textiles exhibit encouraging anti-counterfeiting and security-warning functions, along with underwater and long-distance detectability, washability, and sun resistance. It is worth noting that the present work is innovative in realizing the application of red-light-emitting CQDs in the fields of security-warning textiles.

Carbon Dot Synthesis and Purification: Trends, Challenges and Recommendations

Carbon dots (CDs) have rapidly emerged as a new family of carbon-based nanomaterials since their initial discovery two decades ago. Numerous appealing properties, such as precursor and synthesis process flexibility, tunable photoluminescence, and good biocompatibility, have enabled their widespread applications in sensing, catalysis, energy, and biomedical fields. As the field expands, notable efforts have recently focused on mechanistically elucidating the structural formation and optical behavior of CDs. However, the absence of "clean" CDs presents a major obstacle to achieving a solid understanding of these aspects. Often, the claimed CDs are, in fact, a mixture of small molecules, oligomers, nano-sized aggregates, or even microparticles. Such coexistence of impurities markedly impacts the physicochemical properties of resulting CD-based mixtures, hampering the resolution of key mechanistic questions. Here, we aim to address this fundamental shortcoming of the field, going beyond the customary focus of the existing reviews that predominantly cover synthesis, optical performance, and application prospects. We begin with an overview of CD synthesis and then thoroughly examine the purification methods, including filtration, dialysis, electrophoresis, and chromatography. The insights provided here will guide the researchers towards obtaining high-quality CDs, employing proper combinations of available tools, and ultimately paving the way for more demanding applications.

Fabrication of a ratiometric fluorescent probe based on Tb3+ doped dual-emitting carbon dots for the detection of cytochrome c

Cytochrome c (Cyt-c) was commonly an intrinsic biomarker for a variety of cellular characteristics, such as respiration, energy levels, and apoptosis. Herein, a simple fluorescence sensor was constructed for the detection of Cyt-c in buffer and real serum samples. The carbon dots doped with Tb3+ on the premise of 1-(2-pyridylazo)-2-naphthol (PAN) were fabricated and used as a dual-emission ratiometric fluorescent probe for detecting Cyt-c based on the internal filtering effect (IFE). As a fluorescent probe for ultra-sensitive detection, Cyt-c was quantitatively detected at different concentrations from 1 to 1000 nM. The fluorescent detection method for Cyt-c showed a good linear relationship from 1 to 50 nM, and the limit of detection (LOD) was 0.35 nM. In the recovery range of 101.27-103.39 % in human serum samples, the relative standard deviation (RSD) was less than 3.27 % (n = 3). In the end, the possible structures of CDs were predicted by DFT theoretical simulation calculations. All the results proved the ability of carbon dots as fluorescent probes to detect biomarkers and the application prospects in bioanalysis.

Selective dual sensing strategy for free and vitamin D3 micelles in food samples based on S,N-GQDs photoinduced electron transfer

A reliable nanotechnological sensing strategy, based on an S,N-co-doped graphene quantum dot (GQD) platform, has been developed to distinctly detect two key variants of vitamin D3, specifically the free (VD3) and the nanoencapsulated form (VD3Ms). For this purpose, food-grade vitamin D3 micelles were self-assembled using a low-energy procedure (droplet size: 49.6 nm, polydispersity index: 0.34, ζ-potential: -33 mV, encapsulation efficiency: 90 %) with an innovative surfactant mixture (Tween 60 and quillaja saponin). Herein, four fluorescent nanoprobes were also synthesized and thoroughly characterized: S,N-co-doped GQDs, α-cyclodextrin-GQDs, β-cyclodextrin-GQDs, and γ-cyclodextrin-GQDs. The goal was to achieve a selective dual sensing strategy for free VD3 and VD3Ms by exploiting their distinctive quenching behaviors. Thus, the four nanosensors allowed the individual sensing of both targets to be performed (except α-CD-GQD for VD3Ms), but S,N-GQDs were finally selected due to selectivity and sensitivity (quantum yield, QY= 0.76) criteria. This choice led to a photoinduced electron transfer (PET) mechanism associated with static quenching, where differentiation was evidenced through a displayed 13-nm hypsochromic (blue) shift when interacting with VD3Ms. The reliability of this dual approach was demonstrated through an extensive evaluation of analytical performance characteristics. The feasibility and accuracy were proven in commercial food preparations and nutritional supplements containing declared nanoencapsulated and raw VD3, whose results were validated by a paired Student's t-test comparison with a UV-Vis method. To the best of our knowledge, this represents the first non-destructive analytical approach addressing the groundbreaking foodomic trend to distinctly detect different bioactive forms of vitamin D3, while also preserving their native nanostructures as a chemical challenge, thus providing reliable information about their final stability and bioavailability.

A review on synthesis, properties, and biomedical applications of graphene quantum dots (GQDs)

A new type of 0-dimensional carbon-based materials called graphene quantum dots (GQDs) is gaining significant attention as a non-toxic and eco-friendly nanomaterial. GQDs are nanomaterials composed of sp2hybridized carbon domains and functional groups, with their lateral size less than 10 nm. The unique and exceptional physical, chemical, and optical properties arising from the combination of graphene structure and quantum confinement effect due to their nano-size make GQDs more intriguing than other nanomaterials. Particularly, the low toxicity and high solubility derived from the carbon core and abundant edge functional groups offer significant advantages for the application of GQDs in the biomedical field. In this review, we summarize various synthetic methods for preparing GQDs and important factors influencing the physical, chemical, optical, and biological properties of GQDs. Furthermore, the recent application of GQDs in the biomedical field, including biosensor, bioimaging, drug delivery, and therapeutics are discussed. Through this, we provide a brief insight on the tremendous potential of GQDs in biomedical applications and the challenges that need to be overcome in the future.

Simultaneous electrochemical determination of uric acid and hypoxanthine at a TiO2/graphene quantum dot-modified electrode

A TiO2/graphene quantum dots composite (TiO2/GQDs) obtained by in situ synthesis of GQDs, derived from coffee grounds, and peroxo titanium complexes was used as electrode modifier in the simultaneous electrochemical determination of uric acid and hypoxanthine. The TiO2/GQDs material was characterized by photoluminescence, X-ray diffraction, Raman spectroscopy, high-resolution transmission electron microscopy, and energy-dispersive X-ray mapping. The TiO2/GQDs-GCE exhibits better electrochemical activity for uric acid and hypoxanthine than GQDs/GCE or TiO2/GCE in differential pulse voltammetry (DPV) measurements. Under optimized conditions, the calibration plots were linear in the range from 1.00 to 15.26 μM for both uric acid and hypoxanthine. The limits of detection of this method were 0.58 and 0.68 μM for uric acid and hypoxanthine, respectively. The proposed DPV method was employed to determine uric acid and hypoxanthine in urine samples with acceptable recovery rates.

A highly effective peroxidase-mimic nanozyme of S, N-carbon dot-decorated cerium organic framework-based colorimetric detection of Hg2+ ion and thiophanate methyl

In this study, we proposed a colorimetric probe as S, N-carbon dot-decorated Ce-MOF (S, N-CD@Ce-MOF) for the dual detection of mercury and thiophanate methyl (TM), which are simultaneously present pollutants in the environment and foodstuffs. These pollutants cause serious threats to human health, such as carcinogenicity and neurovirulence. Herein, we synthesized S, N-CD@Ce-MOF using the hydrothermal method and applied it to a "turn-off-on" probe to detect mercury and TM using the colorimetric method in water and food samples. S, N-CD@Ce-MOF shows excellent peroxidase activity by catalyzing the chromogenic substrate of 3,3',5,5'-tetramethylbenzidine (TMB), resulting in deep blue-colored oxidized TMB product (ox TMB) in the presence of H2O2 with a UV absorption wavelength at 654 nm. However, the addition of Hg(II) ions prohibits the oxidation of TMB by an electron transfer effect and easily binds with -S, -N-containing sites on the surface of carbon dots, obstructing the catalytic active sites and decreasing catalytic efficiency with weak UV absorption at 654 nm as a "turn-off". Subsequently, the addition of TM to the above sensing solution as a "turn-on" was triggered by the TM-Hg complex formation and permitted TMB oxidation with a strong absorption peak at 654 nm. Furthermore, this proposed sensor demonstrates a superior linear response to mercury ions and TM in the ranges from 0 to 15 μM and 0 to 14 μM, respectively. The developed colorimetric assay exhibits good sensitivity and selectivity against various possible interferences. Furthermore, we found that the limits of detection for Hg2+ and TM were as low as 0.01 μM and 0.03 μM, respectively. The developed sensor provides various benefits, such as cost-effectiveness, simplicity without a complex detection process, and naked-eye detection. Consequently, our proposed colorimetric technique worked well for the detection of Hg2+ in real water samples and TM in real apple and tomato juice.

Fentogram electrochemical detection of HIV RNA based on graphene quantum dots and gold nanoparticles

This work reports the construction of an HIV-specific genosensor through the modification of carbon screen-printed electrodes (CSPE) with graphene quantum dots decorated with L-cysteine and gold nanoparticles (cys-GQDs/AuNps). Cys-GQDs were characterized by FT-IR and UV-vis spectra and electronic properties of the modified electrodes were evaluated by cyclic voltammetry and electrochemical impedance spectroscopy. The modification of the electrode surface with cys-GQDs and AuNps increased the electrochemical performance of the electrode, improving the electron transfer of the anionic redox probe [Fe(CN)6]3-/4- on the electrochemical platform. When compared to the bare surface, the modified electrode showed a 1.7 times increase in effective electrode area and a 29 times decrease in charge transfer resistance. The genosensor response was performed by differential pulse voltammetry, monitoring the current response of the anionic redox probe, confirmed with real genomic RNA samples, making it possible to detect 1 fg/mL. In addition, the genosensor maintained its response for 60 days at room temperature. This new genosensor platform for early detection of HIV, based on the modification of the electrode surface with cys-GQDs and AuNps, discriminates between HIV-negative and positive samples, showing a low detection limit, as well as good specificity and stability, which are relevant properties for commercial application of biosensors.

Strategic Way of Synthesizing Heteroatom-Doped Carbon Nano-onions Using Waste Chicken Fat Oil for Energy Storage Devices

An easy way of synthesizing low-cost carbon nanomaterials without the need for high-temperature processing approach is critical for energy storage applications because the demand has increased for affordable, long-term, and environmentally friendly synthesized carbon-based materials. Herein, we synthesized multilayered graphitic carbon nano-onions (CNOs) using an oil-wick flame pyrolysis approach, employing biowaste (chicken fat) oil as a cost-effective precursor. The prepared CNOs can provide enhanced ion movement and less resistance for electron transport by interconnecting CNO particles with one another. Furthermore, heteroatom (S,N)-doped CNOs (h-CNOs) were synthesized to optimize the hydrophilic and conductive properties of carbon materials, which eventually exalted the capacitive charge transfer kinetics. The h-CNOs demonstrated superior, highest specific capacitance of 261 F/g, while the undoped CNOs showed a capacitance of 180.6 F/g at a current density of 1 A/g. In addition to capacitance, the h-CNOs also demonstrated a rate capability of 69% and a good cycling stability of 97.5% under high current densities. An asymmetric supercapacitor was fabricated using the h-CNOs as the negative and MnCo2S4 (MCS) as the positive electrode. The device showed high energy and power performance of 32.8 Wh/kg and 7350 W/kg, respectively, with a capacitance retention of 97% over 5000 cycles. Considering the facile strategic way to produce novel carbonaceous materials derived from biowaste oil (chicken fat oil), this could be considered a potential advantage for commercial energy storage devices and may open the door to producing inexpensive, industrially revolutionizing energy storage devices.

Visual detection of H2O2 and glucose by HBcAb-HRP fluorescence-enhanced CdTe QDs/CDs ratiometric fluorescence sensing platform

This study presents the development of a sensitive and simple enhanced ratiometric fluorescence sensing platform in the consist of CdTe quantum dots (QDs), carbon dots (CDs), and hepatitis B core antibody labeled with horseradish peroxidase (HBcAb-HRP) for the visual analysis of H2O2 and glucose. The sulfur atoms in HBcAb-HRP have a strong affinity for Cd(II), which effectively enhances the fluorescence intensity of the CdTe QDs due to the generation of more radiative centers at the CdTe/Cd-SR complex. In the presence of H2O2, the Cd-S bonds are oxidized to form disulfide products and results in linear fluorescence quenching, while CDs maintain stable. Becasue glucose can be converted into H2O2 with the aid of glucose oxidase, this sensing platform can also be used for analyzing glucose. The detection limits for H2O2 and glucose are 2.9 μmol L-1 with RSD of 2.6% and 1.6 μmol L-1 with RSD of 2.4% respectively. In addition, under UV lamp irradiation, the orange-yellow CdTe QDs gradually quench with increasing H2O2 and glucose, while the blue CDs remain unchanged. A color change from orange-yellow to blue enables a visual semi-quantitative determination of H2O2 in commercial contact lens solution and glucose in human serum without any pretreatment. Thus, this CdTe QDs/CDs ratiometric sensing platform has significant potential for the rapid analysis of H2O2 and glucose in actual application.

Tumor diagnosis using carbon-based quantum dots: Detection based on the hallmarks of cancer

Carbon-based quantum dots (CQDs) have been shown to have promising application value in tumor diagnosis. Their use, however, is severely hindered by the complicated nature of the nanostructures in the CQDs. Furthermore, it seems impossible to formulate the mechanisms involved using the inadequate theoretical frameworks that are currently available for CQDs. In this review, we re-consider the structure-property relationships of CQDs and summarize the current state of development of CQDs-based tumor diagnosis based on biological theories that are fully developed. The advantages and deficiencies of recent research on CQDs-based tumor diagnosis are thus explained in terms of the manifestation of nine essential changes in cell physiology. This review makes significant progress in addressing related problems encountered with other nanomaterials.

n-Type Fullerene-Carbon Dots: Synthesis and Electrochemical and Photophysical Properties

The covalent incorporation of C60 and C70 derivatives of the well-known n-type organic semiconductor PCBM ([6,6]-phenyl-C61-butyric acid methyl ester) onto carbon dots (CD) is described. Morphological and structural characterization reveal combined features of both pristine starting materials (CD and PCBM). Electrochemical investigations evidenced the existence of additional reduction processes to that of CD or PCBM precursors, showing rich electron-acceptor capabilities, with multistep processes in an affordable and narrow electrochemical window (ca. 1.5 V). Electronic communication in the obtained nanoconjugated species were derived from steady-state absorption and emission spectroscopies, which showed bathochromically shifted absorptions and emissions well entering the red region. Finally, the lower fluorescence quantum yield of CD-PCBM nanoconjugates, compared with CD, and the fast decay of the observed emission of CD, support the existence of an electronic communication between both CD and PCBM units in the excited state.

Engineering functionalization and properties of graphene quantum dots (GQDs) with controllable synthesis for energy and display applications

Graphene quantum dots (GQDs), a new type of 0D nanomaterial, are composed of a graphene lattice with sp2 bonding carbon core and characterized by their abundant edges and wide surface area. This unique structure imparts excellent electrical properties and exceptional physicochemical adsorption capabilities to GQDs. Additionally, the reduction in dimensionality of graphene leads to an open band gap in GQDs, resulting in their unique optical properties. The functional groups and dopants in GQDs are key factors that allow the modulation of these characteristics. So, controlling the functionalization level of GQDs is crucial for understanding their characteristics and further application. This review provides an overview of the properties and structure of GQDs and summarizes recent developments in research that focus on their controllable synthesis, involving functional groups and doping. Additionally, we provide a comprehensive and focused explanation of how GQDs have been advantageously applied in recent years, particularly in the fields of energy storage devices and displays.

N,Si co-doped GQDs: Facile green preparation and application in visual identifying dihydroxybenzene isomers and selective quantification of catechol, hydroquinone and antioxidants

A green economical procedure for preparing N,Si co-doped graphene quantum dots (N,Si-GQDs) using waste toners and ethylene diamine was reported, which not only minimizes waste and promotes recycling but also offers an alternative method for producing N,Si-GQDs. At a pH of 8.5, hydroquinone and catechol underwent oxidation in the presence of air, resulting in the formation of diquinones, specifically p-phenyldiquinone and o-phenyldiquinone. Resorcinol, on the other hand, was converted into monoquinone. The interaction between diquinones and N,Si-GQDs caused a linear fluorescence quenching effect when catechol and hydroquinone were present. However, this effect was minimal in the case of resorcinol. Furthermore, the antioxidants glutathione (GSH) and ascorbic acid (AA) were observed to disrupt the redox equilibrium of catechol and o-phenyldiquinone, leading to the activation of fluorescence. Conversely, hydroquinone and p-phenyldiquinone, due to the highly stable and symmetrical structure of p-phenyldiquinone, did not exhibit this fluorescence activation. Based on the described "Off-On" sensor system, it was possible to visually identify dihydroxybenzene isomers and selectively quantify catechol and hydroquinone in environmental samples, as well as GSH and AA in human serum. The method detection limits were 0.93, 1.35, 2.34, and 1.37 μM for catechol, hydroquinone, GSH, and AA, respectively. In conclusion, the presented procedure offers several advantages, including environmental friendliness, cost-effectiveness, and a means of recycling waste toners. It also demonstrates the successful synthesis of N,Si-GQDs, as well as the potential for their application in the "Off-On" sensor system for the detection and quantification of various analytes.

Development of aptasensor for chlorpyrifos detection using paper-based screen-printed electrode

Novel Carbon quantum dots-graphite composite ink-based Screen-printed electrodes (CQDs/SPEs) were used to assemble a highly sensitive electrochemical aptasensor against chlorpyrifos (CPF). The aptasensor showed a broad linear range from 1 pM (0.445 ng/ml) to 500 nM (0.22 mg/ml) with a detection limit (LOD) 0.834 pM (0.37 ng/ml); sensitivity 21.39 μA pM-1 cm- 2 and with good linearity of R2 = 0.973. Moreover, the aptasensor's showed better selectivity among few other pesticides. Further, the aptasensor electrode showed high stability for five months when stored at 4 °C. In the final step, the aptasensor's ability to identify CPF in real samples was evaluated on spiked potato (Solanum tuberosum) extract samples. Potato extract spiked with CPF in the electrochemical aptasensing platform showed excellent linearity of R2 = 0.981. The developed aptasensor showed good response to without spiked potato extract with increasing volumes. Hence, the developed aptasensor demonstrated reasonable applicability in real food and agriculture samples.

Molecularly designed and synthesized of bright blue nitrogen-doped lignin-derived carbon dots applied in printable anti-counterfeiting

With the increased demand for green and sustainable development, the research of advanced biomass-based carbon dots (CDs) has drawn growing attention. Herein, a one-step green solvent integration strategy-assisted solvothermal method to preparing CDs from hydrolyzed lignin and ethylenediamine (EDA) in formamide (FA) was developed. The Schiff reaction between FA and EDA contributes to the formation of -C-N groups, further inducing the high photoluminescence quantum yield (up to 42.69 %)，obviously higher than NCDs prepared in H2O, EtOH and DMF systems (corresponding to H-NCDs, E-NCDs and D-NCDs, respectively). The analysis of structure, composition, photoluminescence (PL) behaviors and DFT calculations showed that F-NCDs have main blue fluorescent emission peak from 410 to 455 nm under 330-390 nm excitation due to the small sp2 structure in carbon core, and the large sp2 conjugated clusters and CO group related surface states leaded to the long wavelength emission. The F-NCDs with excellent optical properties was further used for preparing fluorescent film and invisible anti-counterfeiting ink, which exhibited outstanding fluorescence even at different temperatures and aging times. We provided a facile way for green facile preparation of lignin-based CDs and their sustainable anti-counterfeiting application.

Sustainable synthesis of lignin-derived carbon dots with visible pH response for Fe3+ detection and bioimaging

Synthesis of lignin-based carbon dots (LCDs) with high quantum yield (QY), stable fluorescence properties and biocompatibility has been a challenge. Here, we propose an improved two-step strategy for producing high-quality LCDs from enzymatic hydrolysis lignin (EHL). The p-aminobenzenesulfonic acid used in the strategy not only provides nitrogen and sulfur elements, but also tailors the disordered three-dimensional structure of EHL. The successful co-doping of N and S elements favors the reduction of the optical energy bandgap (Eg), resulting in a high QY of 45.05% for LCDs. The LCDs exhibited superior selectivity and sensitivity for Fe3+ with a limit of detection (LOD) of 0.15 μM when Fe3+ concentration was 50-500 μM. In addition, LCDs demonstrated significant fluorescence in HepG2 cells and HepG2 cells loaded with LCDs at a concentration of 80 μg/mL showed good viability, suggesting that they are suitable for in vivo applications. The luminescent centers of LCDs change during pH regulation and thus show a special visual response to pH changes, making them have great potential for detecting metabolism in living cells. This work provides a novel and low-cost method for fabricating sustainable fluorescent probes for chemical sensing and bioimaging.

Facile synthesis of S, N-co-doped carbon dots for bio-imaging, Fe3+ detection and DFT calculation

Turning waste into wealth, herein, two highly fluorescent N and S co-doped carbon dots (N, S-CDs-A and N, S-CDs-B) were synthesized by the hydrothermal reaction of contaminant reactive red 2 (RR2) and L-cysteine or L-methionine, respectively. The detailed morphology and structure of N, S-CDs were characterized by XRD, Raman spectrum, FTIR spectra, TEM, HRTEM, AFM and XPS. The maximum fluorescent of N, S-CDs-A and N, S-CDs-B are 565 and 615 nm under different excitation wavelengths with moderate fluorescence intensity of 14.0 % and 6.3 %, respectively. The microstructure models of N, S-CDs-A and N, S-CDs-B, which were induced by FT-IR, XPS and element analysis, had been applied in DFT calculation. The result indicated that the doping of S and N is beneficial to obtain the red-shift of fluorescent spectra. Both N, S-CDs-A and N, S-CDs-B showed highly sensitive and selective to Fe3+. N, S-CDs-A can also detect Al3+ ion with high sensitivity and selectivity. Finally, N, S-CDs-B was successfully applied in cell imaging.

Utilizing Atmospheric Carbon Dioxide and Sunlight in Graphene Quantum Dot-Based Nano-Biohybrid Organisms for Making Carbon-Negative and Carbon-Neutral Products

Increasing emissions of greenhouse gases compounded with legacy emissions in the earth's atmosphere poses an existential threat to human survival. One potential solution is creating carbon-negative and carbon-neutral materials, specifically for commodities used heavily throughout the globe, using a low-cost, scalable, and technologically and economically feasible process that can be deployed without the need for extensive infrastructure or skill requirements. Here, we demonstrate that nickel-functionalized graphene quantum dots (GQDs) can effectively couple to nonphotosynthetic bacteria at a cellular, molecular, and optoelectronic level, creating nanobiohybrid organisms (nanorgs) that enable the utilization of sunlight to convert carbon dioxide, air, and water into high-value-added chemicals such as ammonia (NH3), ethylene (C2H4), isopropanol (IPA), 2,3-butanediol (BDO), C11-C15 methyl ketones (MKs), and degradable bioplastics poly hydroxybutyrate (PHB) with high efficiency and selectivity. We demonstrate a high turnover number (TON) of up to 108 (mol of product per mol of cells), ease of application, facile scalability (demonstrated using a 30 L tank in a lab), and sustainable generation of carbon nanomaterials from recovered bacteria for creating nanorgs without the use of any toxic chemicals or materials. These findings can have important implications for the further development of sustainable processes for making carbon-negative materials using nanorgs.

From Pristine to Heteroatom-Doped Graphene Quantum Dots: An Essential Review and Prospects for Future Research

Graphene quantum dots (GQDs) are carbon-based zero-dimensional materials that have received considerable scientific interest due to their exceptional optical, electrical, and optoelectrical properties. Their unique electronic band structures, influenced by quantum confinement and edge effects, differentiate the physical and optical characteristics of GQDs from other carbon nanostructures. Additionally, GQDs can be synthesized using various top-down and bottom-up approaches, distinguishing them from other carbon nanomaterials. This review discusses recent advancements in GQD research, focusing on their synthesis and functionalization for potential applications. Particularly, various methods for synthesizing functionalized GQDs using different doping routes are comprehensively reviewed. Based on previous reports, current challenges and future directions for GQDs research are discussed in detail herein.

Nitrogen-Doped Graphene Quantum Dot-Passivated δ-Phase CsPbI3: A Water-Stable Photocatalytic Adjuvant to Degrade Rhodamine B

Inorganic halide perovskite CsPbI3 is highly promising in the photocatalytic field for its strong absorption of UV and visible light. Among the crystal phases of CsPbI3, the δ-phase as the most aqueous stability; however, directly using it in water is still not applicable, thus limiting its dye photodegradation applications in aqueous solutions. Via adopting nitrogen-doped graphene quantum dots (NGQDs) as surfactants to prepare δ-phase CsPbI3 nanocrystals, we obtained a water-stable material, NGQDs-CsPbI3. Such a material can be well dispersed in water for a month without obvious deterioration. High-resolution transmission electron microscopy and X-ray diffractometer characterizations showed that NGQDs-CsPbI3 is also a δ-phase CsPbI3 after NGQD coating. The ultraviolet-visible absorption spectra indicated that compared to δ-CsPbI3, NGQDs-CsPbI3 has an obvious absorption enhancement of visible light, especially near the wavelength around 521 nm. The good dispersity and improved visible-light absorption of NGQDs-CsPbI3 benefit their aqueous photocatalytic applications. NGQDs-CsPbI3 alone can photodegrade 67% rhodamine B (RhB) in water, while after compositing with TiO2, NGQDs-CsPbI3/TiO2 exhibits excellent visible-light photocatalytic ability, namely, it photodegraded 96% RhB in 4 h. The strong absorption of NGQDs-CsPbI3 in the visible region and effective transfer of photogenerated carriers from NGQDs-CsPbI3 to TiO2 play the key roles in dye photodegradation. We highlight NGQDs-CsPbI3 as a water-stable halide perovskite material and effective photocatalytic adjuvant.

N- and S-codoped carbon quantum dots for enhancing fluorescence sensing of trace Hg2

Carbon-quantum-dot-based fluorescence sensing of Hg2+ is a well-known cost-effective tactic with fast response and high sensitivity, while rationally constructing heteroatom-doped carbon quantum dots with improved fluorescence sensing performances through tuning the electronic and chemical structures of the reactive site still remains a challenging project for monitoring trace Hg2+ in aquatic ecosystems to avoid harm resulting from its high toxicity, nonbiodegradabilty and accumulative effects on human health. Herein, intriguing N,S-codoped carbon quantum dots were synthesized via a facile one-step hydrothermal procedure. As an admirable fluorescent probe with plentiful heteroatom-related functional groups, these N,S-codoped carbon quantum dots can exhibit an absolute fluorescence quantum yield as high as 11.6%, excellent solubility and stability over three months, remarkable sensitivity for Hg2+ detection with an attractive detection limit of 0.27 μg L-1 and admirable selectivity for Hg2+ against thirteen other metal ions. Density functional theory calculations reveal that electron-enriched meta-S of the unique graphitic N with homocyclic meta-thiophene sulfur structure can regulate this N site to have more electrons and preferable affinity towards Hg, hence achieving enhanced fluorescence quenching due to greater charge transfer from N to Hg after the coordination interaction. This strategy provides a promising avenue for precisely designing purpose-made quantum dots with the dedicated fluorescence sensing applications.

Carbon Dots Derived from Traditional Chinese Medicines with Bioactivities: A Rising Star in Clinical Treatment

In the field of carbon nanomaterials, carbon dots (CDs) have become a preferable choice in biomedical applications. Based on the concept of green chemistry, CDs derived from traditional Chinese medicines (TCMs) have attracted extensive attention, including TCM charcoal drugs, TCM extracts, and TCM small molecules. The design and preparation of CDs from TCMs (TCMs-CDs) can improve the inherent characteristics of TCMs, such as solubility, particle size distribution, and so on. Compared with other precursor materials, TCMs-CDs have outstanding intrinsic bioactivities and potential pharmacological effects. However, the research of TCMs-CDs in biomedicine is not comprehensive, and their mechanisms have not been understood deeply either. In this review, we will provide concise insights into the recent development of TCMs-CDs, with a major focus on their preparation, formation, precursors, and bioactivities. Then we will discuss the perfect transformation from TCMs to TCMs-CDs. Finally, we discuss the opportunities and challenges for the application of TCMs-CDs in clinical treatment.

Design of a Synthetic Strategy to Achieve Enhanced Fluorescent Carbon Dots with Sulfur and Nitrogen Codoping and Its Multifunctional Applications

Here, a rational strategy to achieve multifunctional N, S codoped carbon dots (N, S-CDs) is reported, aiming to improve the photoluminescence quantum yields (PLQYs) of the CDs. The synthesized N, S-CDs have excellent stability and emission properties independent of excitation wavelength. Through the introduction of S element doping, the fluorescence emission of CDs is red-shifted from 430 to 545 nm, and the corresponding PLQYs can be greatly enhanced from 11.2% to 65.1%. It is found that the doping of S elements causes an increase in the size of CDs and an elevated graphite N content, which may be the key factors to cause the redshift of fluorescence emission. Furthermore, the introduction of S element also serves to suppress the nonradiative transitions, which may be responsible for the elevated PLQYs. Besides, the synthesized N, S-CDs have certain solvent effect and can be applied to detect water content in organic solvents, and have strong sensitivity to alkaline environment. More importantly, the N, S-CDs can be used to achieve an "on-off-on" dual detection mode between Zr4+ and NO2 - . In addition, N, S-CDs combinedwith polyvinylpyrrolidone (PVP) can also be utilized as fluorescent inks for anti-counterfeiting applications.

Efficient photoelectrochemical aptasensing of di-2-ethylhexyl phthalate in environmental samples based on N, S co-doped graphene quantum dots/TiO2 nanorods

An efficient photoelectrochemical (PEC) sensing platform was developed for detection of di-2-ethylhexyl phthalate (DEHP) based on nitrogen and sulfur co-doped graphene quantum dots/TiO₂ nanorods (N, S-GQDs/TiO₂ NRs) coupling with exonuclease I (Exo I)-assisted target recycling for remarkable signal amplification. N, S-GQDs uniformly grown on TiO₂ NRs by simple hydrothermal method showed high electron-hole separation efficiency and superior photoelectric performance, which was explored as the photoactive substrate for anchoring anti-DEHP aptamer and its complementary DNA (cDNA). With the addition of DEHP, aptamer molecules fell from the electrode surface owing to the specific recognition of aptamer to DEHP, resulting in the increment of photocurrent signal. At this moment, Exo I could stimulate aptamer hydrolysis in the aptamer-DEHP complexes, so that DEHP was released from the complexes to take part in the next reaction cycling, which remarkably increasing the photocurrent response and achieving signal amplification. The designed PEC sensing platform exhibited excellent analytical performance for DEHP with a low detection limit of 0.1 pg L^-1. Also, its applications in real samples were further investigated in detail. Thus, the established method would provide a simple and efficient tool for DEHP or other pollutants monitoring in the environment.

One-Pot Synthesis of Nitrogen-Doped Graphene Quantum Dots and Their Applications in Bioimaging and Detecting Copper Ions in Living Cells

Two natural carbon sources, glutamic acid and tyrosine, were used to fabricate strong green emission nitrogen-doped graphene quantum dots (N-GQDs) with the one-pot pyrolysis method. The morphology of the prepared GQDs has been characterized by high-resolution transmission electron microscopy, showing a well-displayed crystalline structure with a lattice spacing of 0.262 nm. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy were used to analyze the surface functional groups and elemental composition, suggesting that the N-GQDs have active carboxylic and amino functional groups. Meanwhile, photoluminescence and ultraviolet-visible (UV-vis) spectroscopy were used to evaluate the optical properties of GQDs; the prepared N-GQDs show an excitation-dependent fluorescence behavior with a maximum excitation/emission wavelength at 460/522 nm, respectively. N-GQDs showed good photostability and the fluorescence intensity quenched about 10% after irradiating 2800 s in the experiment of time kinetic analysis. The MTT assay was utilized to assess the viability of N-GQDs; good biocompatibility with a relatively high quantum yield of 12% demonstrated the potential for serving as bioimaging agents. Besides, the selectivity study on metal ions indicates that the N-GQDs could be used in Cu2+ detection. The linear range is from 0.1 to 10 μM with a limit of detection of 0.06 μM. Overall, these proposed N-GQDs with one-pot synthesis showed their promising potential in cell imaging and Cu2+ monitoring applications involved in the biological environment.

Adenosine/β-Cyclodextrin-Based Metal-Organic Frameworks as a Potential Material for Cancer Therapy

Recently, researchers have employed metal-organic frameworks (MOFs) for loading pharmaceutically important substances. MOFs are a novel class of porous class of materials formed by the self-assembly of organic ligands and metal ions, creating a network structure. The current investigation effectively achieves the loading of adenosine (ADN) into a metal-organic framework based on cyclodextrin (CD) using a solvent diffusion method. The composite material, referred to as ADN:β-CD-K MOFs, is created by loading ADN into beta-cyclodextrin (β-CD) with the addition of K⁺ salts. This study delves into the detailed examination of the interaction between ADN and β-CD in the form of MOFs. The focus is primarily on investigating the hydrogen bonding interaction and energy parameters through the aid of semi-empirical quantum mechanical computations. The analysis of peaks that are associated with the ADN-loaded ICs (inclusion complexes) within the MOFs indicates that ADN becomes incorporated into a partially amorphous state. Observations from SEM images reveal well-defined crystalline structures within the MOFs. Interestingly, when ADN is absent from the MOFs, smaller and irregularly shaped crystals are formed. This could potentially be attributed to the MOF manufacturing process. Furthermore, this study explores the additional cross-linking of β-CD with K through the coupling of -OH on the β-CD-K MOFs. The findings corroborate the results obtained from FT-IR analysis, suggesting that β-CD plays a crucial role as a seed in the creation of β-CD-K MOFs. Furthermore, the cytotoxicity of the MOFs is assessed in vitro using MDA-MB-231 cells (human breast cancer cells).

Synthesis of Multiple Emission Carbon Dots from Dihydroxybenzoic Acid via Decarboxylation Process

Carbon dots (CDs), as a new zero-dimensional carbon-based nanomaterial with desirable optical properties, exhibit great potential for many application fields. However, the preparation technique of multiple emission CDs with high yield is difficult and complex. Therefore, exploring the large-scale and straightforward synthesis of multicolor CDs from a simple carbon source is necessary. In this work, the solvent-free method prepares a series of multicolor emission CDs from dihydroxybenzoic acid (DHBA). The maximum emission wavelengths are 408, 445, 553, 580, and 610 nm, respectively, covering the visible light region. The 2,4- and 2,6-CDs possess the longer emission wavelength caused by the 2,4-, and 2,6-DHBA easily undergo decarboxylation to form the larger sp² domain graphitized structure. These CDs incorporated with g-C₃N₄ can significantly improve the photocatalytic water-splitting hydrogen production rate by extending the visible light absorption and enhancing the charge separation efficiency. The long-wavelength emission CDs can further enhance photocatalytic activity primarily by improving visible light absorption efficiency.

Bisphenol A Imprinted Electrochemical Sensor Based on Graphene Quantum Dots with Boron Functionalized g-C3N4 in Food Samples

A molecular imprinted electrochemical sensor based on boron-functionalized graphitic carbon nitride (B-g-C₃N₄) and graphene quantum dots (GQDs) was presented for selective determination of bisphenol A (BPA). In particular, by combining the selectivity and high stability properties, which are the most important advantages of molecular imprinted polymers, and the highly sensitive properties of GQDs/B-g-C₃N₄ nanocomposite, a highly selective and sensitive analytical method was developed for BPA analysis. Firstly, GQDs/B-g-C₃N₄ nanocomposite was characterized by using microscopic, spectroscopic, and electrochemical techniques. This novel molecular imprinted electrochemical sensor for BPA detection demonstrated a linearity of 1.0 × 10^-11-1.0 × 10^-9 M and a low detection limit (LOD, 3.0 × 10^-12 M). BPA-imprinted polymer on GQDs/B-g-C₃N₄ nanocomposite also showed good stability, repeatability and selectivity in food samples.

An Efficient Green Approach to Constructing Adenine Sulfate-Derived Multicolor Sulfur- and Nitrogen-Codoped Carbon Dots and Their Bioimaging Applications

A cost-effective and environmentally friendly approach is proposed for producing N- and S-codoped multicolor-emission carbon dots (N- and S-codoped MCDs) at a mild reaction temperature (150 °C) and relatively short time (3 h). In this process, adenine sulfate acts as a novel precursor and doping agent, effectively reacting with other reagents such as citric acid, para-aminosalicylic acid, and ortho-phenylenediamine, even during solvent-free pyrolysis. The distinctive structures of reagents lead to the increased amount of graphitic nitrogen and sulfur doping in the N- and S-codoped MCDs. Notably, the obtained N- and S-codoped MCDs exhibit considerable fluorescence intensities, and their emission color can be adjusted from blue to yellow. The observed tunable photoluminescence can be attributed to variations in the surface state and the amount of N and S contents. Furthermore, due to the favorable optical properties, good water solubility and biocompatibility, and low cytotoxicity, these N- and S-codoped MCDs, especially green carbon dots, are successfully applied as fluorescent probes for bioimaging. The affordable and environmentally friendly synthesis method employed to create N- and S-codoped MCDs, combined with their remarkable optical properties, offers a promising avenue for their use in various fields, particularly in biomedical applications.

Nitrogen-doped graphene quantum dot-based portable fluorescent sensors for the sensitive detection of Fe3+ and ATP with logic gate operation

Adenosine triphosphate (ATP) and Fe³⁺ are important "signaling molecules" in living organisms, and their abnormal concentrations can be used for the early diagnosis of degenerative diseases. Therefore, the development of a sensitive and accurate fluorescent sensor is essential for detecting these signaling molecules in biological matrices. Herein, nitrogen-doped graphene quantum dots (N-GQDs) with cyan fluorescence emission were prepared by thermal cleavage of graphene oxide (GO) with N,N-dimethylformamide (DMF) as a solvent. The synergistic effect of static quenching and internal filtration enabled the selective quenching of N-GQD fluorescence by Fe³⁺. With the introduction of ATP, Fe³⁺ in the N-GQDs-Fe³⁺ system formed a more stable complex with ATP via the Fe-O-P bond, thus restoring the fluorescence of the N-GQDs. Fe³⁺ and ATP were detected in the linear ranges of 0-34 μM and 0-10 μM with the limits of detection (LOD) of 2.38 nM and 1.16 nM, respectively. In addition to monitoring Fe³⁺ and ATP in mouse serum and urine, the proposed method was also successfully applied for cytoplasmic imaging of 4T1 cells and in vivo imaging of freshwater shrimps. Moreover, the fluorescence and solution color change-based "AND" logic gate was successfully demonstrated in the biological matrix. Importantly, a complete sensing system was constructed by combining the N-GQDs with hydrogel kits and fluorescent flexible films. Thus, the prepared N-GQDs can be expected to serve as a valuable analytical tool for monitoring Fe³⁺ and ATP concentrations in biological matrices.

S,N-GQD sensitization effect on the improvement of ZnO nanopencil photoelectrochemical properties

ZnO photoanodes in photoelectrochemical (PEC) water splitting for green-hydrogen production are limited due to the large bandgap that is only confined to UV light. One of the strategies for broadening the photo absorption range and improving light harvesting is to modify a one-dimensional (1D) nanostructure to a three-dimensional (3D) ZnO superstructure coupling with a narrow-bandgap material, in this case, a graphene quantum dot photosensitizer. Herein, we studied the effect of sulfur and nitrogen co-doped graphene quantum dot (S,N-GQD) sensitization on the surface of ZnO nanopencil (ZnO NPc) to give a photoanode in the visible light spectrum. In addition, the photo energy harvesting between the 3D-ZnO and 1D-ZnO, as represented by neat ZnO NPc and ZnO nanorods (ZnO NRs), was also compared. Several instruments, including SEM-EDS, FTIR, and XRD revealed the successful loading of S,N-GQDs on the ZnO NPc surfaces through the layer-by-layer assembly technique. The advantages are S,N-GQDs's band gap energy (2.92 eV) decreasing ZnO NPc's band gap value from 3.169 eV to 3.155 eV after being composited with S,N-GQDs and facilitating the generation of electron-hole pairs for PEC activity under visible light irradiation. Furthermore, the electronic properties of ZnO NPc/S,N-GQDs were improved significantly over those of bare ZnO NPc and ZnO NR. The PEC measurements revealed that the ZnO NPc/S,N-GQDs stood out with a maximum current density of 1.82 mA cm^-2 at +1.2 V (vs. Ag/AgCl), representing a 153% and 357% improvement over the bare ZnO NPc (1.19 mA cm^-2) and the ZnO NR (0.51 mA cm^-2), respectively. These results suggest that ZnO NPc/S,N-GQDs could have potential for water splitting applications.

Supramolecular β-Cyclodextrin-Quercetin Based Metal-Organic Frameworks as an Efficient Antibiofilm and Antifungal Agent

The loading of drugs or medicinally active compounds has recently been performed using metal-organic frameworks (MOFs), which are thought to be a new type of porous material in which organic ligands and metal ions can self-assemble to form a network structure. The quercetin (QRC) loading and biofilm application on a cyclodextrin-based metal-organic framework via a solvent diffusion approach is successfully accomplished in the current study. The antibacterial plant flavonoid QRC is loaded onto β-CD-K MOFs to create the composite containing inclusion complexes (ICs) and denoted as QRC:β-CD-K MOFs. The shifting in the chemical shift values of QRC in the MOFs may be the reason for the interaction of QRC with the β-CD-K MOFs. The binding energies and relative contents of MOFs are considerably changed after the formation of QRC:β-CD-K MOFs, suggesting that the interactions took place during the loading of QRC. Confocal laser scanning microscopy (CLSM) showed a reduction in the formation of biofilm. The results of the cell aggregation and hyphal growth are consistent with the antibiofilm activity that is found in the treatment group. Therefore, QRC:β-CD-K MOFs had no effect on the growth of planktonic cells while inhibiting the development of hyphae and biofilm in C. albicans DAY185. This study creates new opportunities for supramolecular β-CD-based MOF development for use in biological research and pharmaceutical production.

Nitrogen-, Sulfur-, and Fluorine-Codoped Carbon Dots with Low Excitation Potential and High Electrochemiluminescence Efficiency for Sensitive Detection of Matrix Metalloproteinase-2

In this study, nitrogen-, sulfur-, and fluorine-codoped carbon dots (NSF-CDs) with high electrochemiluminescence (ECL) efficiency were developed as novel emitters to fabricate an ECL biosensor for sensitive detection of matrix metalloproteinase 2 (MMP-2). Impressively, compared to previously reported CDs, NSF-CDs with narrow band gap not only decreased the excitation voltage to reduce the side reaction and the damage on biomolecules but also had hydrogen bonds to vastly enhance the ECL efficiency. Furthermore, an improved exonuclease III (Exo III)-assisted nucleic acid amplification method was established to convert trace MMP-2 into a mass of output DNA, which greatly improved the target conversion efficiency and ECL signal. Hence, the ECL biosensor has realized the sensitive detection of MMP-2 proteins from 10 fg/mL to 10 ng/mL with a limit of detection of 6.83 fg/mL and has been successfully applied in the detection of MMP-2 from Hela and MCF-7 cancer cells. This strategy offered neoteric CDs as ECL emitters for sensitive testing of biomarkers in medical research.

Carbon dots with aggregation-induced emission enhancement (AIEE) for detection of Zr4+/ Hf4+ and PTP1B activity

The frequent use of Zirconium (Zr) and Hafnium (Hf) in modern industries may result in serious environment issues, and thus developing analytical methods to facilitate the control of these two resembled metal elements is urgently needed. However, up to now, rapidly and conveniently detecting Zr⁴⁺ and Hf⁴⁺ is still full of challenge. In this study, nitrogen and sulfur co-doped carbon dots (N, S-Cdots) with aggregation-induced emission enhancement (AIEE) were prepared and used for turn-on detection of Zr⁴⁺ and Hf⁴⁺ within 10 min. The photoluminescent intensity of N, S-Cdots showed a good linear correlation with Zr⁴⁺ and Hf⁴⁺concentrations ranging from 0 to 30 μM with the limit of detection (LOD) of 0.47 and 0.53 μM, respectively. Furthermore, this fluorometric assay was successfully used for quantitative analysis of Zr⁴⁺ and Hf⁴⁺ in real water samples with satisfactory recoveries in the range of 91.16-108.50% and 90.28-106.49%, respectively. Finally, the developed N, S-Cdots sensing system was used for assay PTP1B activity and screening its inhibitor with Zr⁴⁺ as the medium. Our work demonstrated that the as-prepared N, S-Cdots with AIEE can offer a simple and reliable alternative for rapid detection of Zr⁴⁺ and Hf⁴⁺ in water samples, in addition to being potential useful in phosphatase analysis and drug discovery.

Carbon Dots Based Photoinduced Reactions: Advances and Perspective

Seeking clean energy as an alternative to traditional fossil fuels is the inevitable choice to realize the sustainable development of the society. Photocatalytic technique is considered a promising energy conversion approach to store the abundant solar energy into other wieldy energy carriers like chemical energy. Carbon dots, as a class of fascinating carbon nanomaterials, have already become the hotspots in numerous photoelectric researching fields and particularly drawn keen interests as metal-free photocatalysts owing to strong UV-vis optical absorption, tunable energy-level configuration, superior charge transfer ability, excellent physicochemical stability, facile fabrication, low toxicity, and high solubility. In this review, the classification, microstructures, general synthetic methods, optical and photoelectrical properties of carbon dots are systematically summarized. In addition, recent advances of carbon dots based photoinduced reactions including photodegradation, photocatalytic hydrogen generation, CO2 conversion, N2 fixation, and photochemical synthesis are highlighted in detail, deep insights into the roles of carbon dots in various systems combining with the photocatalytic mechanisms are provided. Finally, several critical issues remaining in photocatalysis field are also proposed.

Emerging Trends of Carbon-Based Quantum Dots: Nanoarchitectonics and Applications

Carbon-based quantum dots (QDs) have emerged as a fascinating class of advanced materials with a unique combination of optoelectronic, biocompatible, and catalytic characteristics, apt for a plethora of applications ranging from electronic to photoelectrochemical devices. Recent research works have established carbon-based QDs for those frontline applications through improvements in materials design, processing, and device stability. This review broadly presents the recent progress in the synthesis of carbon-based QDs, including carbon QDs, graphene QDs, graphitic carbon nitride QDs and their heterostructures, as well as their salient applications. The synthesis methods of carbon-based QDs are first introduced, followed by an extensive discussion of the dependence of the device performance on the intrinsic properties and nanostructures of carbon-based QDs, aiming to present the general strategies for device designing with optimal performance. Furthermore, diverse applications of carbon-based QDs are presented, with an emphasis on the relationship between band alignment, charge transfer, and performance improvement. Among the applications discussed in this review, much focus is given to photo and electrocatalytic, energy storage and conversion, and bioapplications, which pose a grand challenge for rational materials and device designs. Finally, a summary is presented, and existing challenges and future directions are elaborated.

Effect of hetero-atom doping on the electrocatalytic properties of graphene quantum dots for oxygen reduction reaction

Oxygen reduction is an important reaction involved in a diverse variety of energy storage devices and also in many chemical and biological processes. However, the high cost of suitable catalysts like platinum, rhodium, and iridium proves to be a major obstacle for its commercialization. Consequently, many new materials have emerged in recent years such as various forms of carbon, carbides, nitrides, core–shell particles, Mxenes, and transition metal complexes as alternatives to platinum and other noble metals for oxygen reduction reaction (ORR). Among these, Graphene Quantum Dots (GQDs) as metal-free alternatives have captured universal attention, since electrocatalytic properties can be tuned not only by size and functionalization but by heteroatom doping also. We discuss electrocatalytic properties of GQDs (approximate size 3–5 nm) with specific dopants such as N and S focusing on their synergistic effects of co-doping, prepared by solvothermal routes. Cyclic Voltammetry shows benefits of doping as lowering of the onset potentials while steady-state Galvanostatic Tafel polarization measurements show a clear difference in the apparent Tafel slope, along with enhanced exchange current densities, suggesting higher rate constants.

Codoping g-C3N4 with boron and graphene quantum dots: Enhancement of charge transfer for ultrasensitive and selective photoelectrochemical detection of dopamine

The development of superior photoelectrochemical (PEC) sensors for biosensing has become a major objective of PEC research. However, conventional PEC-active materials are typically constrained by a weak photocurrent response owing to their limited surface-active sites and high electron-hole recombination rate. Here, a boron and graphene quantum dots codoped g-C₃N₄ (named GBCN) as PEC sensor for highly sensitive dopamine (DA) detection was fabricated. GBCN exhibited the greatest photocurrent response and PEC activity compared to free g-C₃N₄ and g-C₃N₄ doped with boron. The proposed PEC sensor for DA determination exhibited a broad linear range (0.001-800 μM) and a low detection limit (0.96 nM). In particular, a sensitivity up to 10.3771 μA/μM/cm² was seen in the case of GBCN. The high PEC activity can be attributed to the following factors: (1) the boron and graphene quantum dots co-doping significantly increased the specific surface area of g-C₃N₄, providing more adsorption sites for DA; (2) the dopants extended the absorption intensity of g-C₃N₄, red-shifting the absorption from 470 to 540 nm; and (3) the synergism of boron and graphene quantum dots efficiently boosted the photogenerated electrons migration from the conduction band of g-C₃N₄ to graphene quantum dots, facilitating charge separation. In addition, GBCN also exhibited good anti-interference ability and stability. This research may shed light on the creation of a highly sensitive and selective PEC platform for detecting biomolecules.

Colorimetric and Fluorescent Sensing of Copper Ions in Water through o-Phenylenediamine-Derived Carbon Dots

Fluorescent nitrogen and sulfur co-doped carbon dots (NSCDs) were synthesized using a simple one-step hydrothermal method starting from o-phenylenediamine (OPD) and ammonium sulfide. The prepared NSCDs presented a selective dual optical response to Cu(II) in water through the arising of an absorption band at 660 nm and simultaneous fluorescence enhancement at 564 nm. The first effect was attributed to formation of cuprammonium complexes through coordination with amino functional groups of NSCDs. Alternatively, fluorescence enhancement can be explained by the oxidation of residual OPD bound to NSCDs. Both absorbance and fluorescence showed a linear increase with an increase of Cu(II) concentration in the range 1-100 µM, with the lowest detection limit of 100 nM and 1 µM, respectively. NSCDs were successfully incorporated in a hydrogel agarose matrix for easier handling and application to sensing. The formation of cuprammonium complexes was strongly hampered in an agarose matrix while oxidation of OPD was still effective. As a result, color variations could be perceived both under white light and UV light for concentrations as low as 10 µM. Since these color changes were similarly perceived in tap and lake water samples, the present method could be a promising candidate for simple, cost-effective visual monitoring of copper onsite.

Synthesis of graphene derivatives from asphaltenes and effect of carbonization temperature on their structural parameters

A method for synthesizing graphene derivatives from asphaltene is proposed in this work. The graphene derivatives are mainly composed of few-layer graphene-like nano-sheets of randomly distributed heteroatoms; mainly sulfur and nitrogen. The proposed method is based on a thermal treatment in which asphaltene is carbonized in a rotating quartz-tube furnace under an inert atmosphere at a temperature in the range of 400-950 °C. Asphaltenes from different origins were employed to verify the synthesis method. The results indicate that graphene derivatives obtained at high carbonization temperature have similar structural parameters, despite the evident differences in parent asphaltenes structures and compositions. The transformation of asphaltene to graphene derivatives mainly occurred due to three factors: the reduction in the average number of aromatic layers (n), the expansion in aromatic sheet diameter (L _a), and the elimination of alkyl side chains. The reduction in the number of aromatic sheets per stack is primarily ascribed to thermal exfoliation, while the increase in the aromatic sheet diameter is attributed to secondary reactions in the aromatic core of asphaltene. The elimination of side chains, on the other hand, is mainly credited to thermal cracking. The quantification of defect density (L _D) in the graphene derivatives suggests an association between defects and heteroatoms presence.

Graphene quantum dots: A comprehensive overview

Because of their prospective applications and exceptional features, graphene quantum dots (GQDs) have gotten a lot of recognition as a new class of fluorescent carbon materials. One of the carbon family’s newest superstars is the GQD. Due to its exceptional optoelectrical qualities, it has sparked a lot of curiosity since its debut in 2008. Two of the most important traits are a band gap that is not zero, biocompatibility, and highly changeable characteristics. GQDs have several important characteristics. GQDs have shown potential in a variety of fields, for instance, catalysis, sensing, energy devices, drug delivery, bioimaging, photothermal, and photodynamic therapy. Because this area constantly evolves, it is vital to recognize emerging GQD concerns in the current breakthroughs, primarily since some specific uses and developments in the case of GQDs synthesis have not been thoroughly investigated through previous studies. The current results in the properties, synthesis, as well as benefits of GQDs are discussed in this review study. As per the findings of this research, the GQD’s future investigation is boundless, mainly if the approaching investigation focuses on purifying simplicity and environmentally friendly synthesis, as well as boosting photoluminescence quantum output and manufacturing output of GQDs.

Microwave synthesis of boron- and nitrogen-codoped graphene quantum dots and their detection to pesticides and metal ions

Through developing a highly efficient solid-phase microwave-assisted (SPMA) synthesis technique, we were able to synthesize graphene quantum dots (GQDs) that were doped with nitrogen and boron atoms. The as-synthesized GQDs were employed as sensing probes for detecting pesticides and iron ions within aqueous solutions. The SPMA approach is very versatile for in-situ doping of multiple atoms within the graphitic structure of GQDs. The maximal B/C and N/C atomic ratios within the GQD structures were reached as high as 28.6 and 86.4 at.%, respectively. For the B-/N-codoped GQDs, the N dopants comprises of pyrrolic/pyridinic N and graphitic N, whereas the B doping mainly involves two bonding types (i.e., B₄C and BCO₂) inserted into or decorated on the GQD skeleton structure. Based on the analysis of the Stern-Volmer plots, the B-/N-codoped GQDs can be employed as probing nanomaterials toward Fe²⁺ and paraquat detection thanks to their incredible sensitivity throughout the photoluminescent quenching. The PL quenching mechanism of GQDs is usually governed by the GQD‒(paraquat)_x intermediates formation and the resulting π-π stacking that can easily quench and aggregate. The findings of this work pave the pathway to engineering the chemical compositions as well as the crystalline structures of GQDs, used for energy and other sensing devices.

Carbon-Based Nanomaterials for Catalytic Wastewater Treatment: A Review

Carbon-based nanomaterials (CBM) have shown great potential for various environmental applications because of their physical and chemical properties. The unique hybridization properties of CBMs allow for the tailored manipulation of their structures and morphologies. However, owing to poor solar light absorption, and the rapid recombination of photogenerated electron-hole pairs, pristine carbon materials typically have unsatisfactory photocatalytic performances and practical applications. The main challenge in this field is the design of economical, environmentally friendly, and effective photocatalysts. Combining carbonaceous materials with carbonaceous semiconductors of different structures results in unique properties in carbon-based catalysts, which offers a promising approach to achieving efficient application. Here, we review the contribution of CBMs with different dimensions, to the catalytic removal of organic pollutants from wastewater by catalyzing the Fenton reaction and photocatalytic processes. This review, therefore, aims to provide an appropriate direction for empowering improvements in ongoing research work, which will boost future applications and contribute to overcoming the existing limitations in this field.

Determination of trace amount of iron cations using electrochemical methods at N, S doped GQD modified electrode

In this work, nitrogen and sulfur co-doped graphene quantum dot-modified glassy carbon electrodes (N, S-GQD/GCE) were used for the recognition of iron cations in aqueous solutions. The dissolved cations are detected based on the faradaic reduction or oxidation current of Fe(III) and Fe(II) obtained at the N, S-GQD/GCE surface. Cyclic voltammetry (CV), square wave voltammetry (SWV), and hydrodynamic amperometry are used as suitable electrochemical techniques for studying electrochemical behavior and determination of Fe cations. Based on the obtained results, it is concluded that the presence of free electrons in the structure of N, S-GQD could facilitate electron transfer reaction between Fe(III) and electrode surface which with increased surface area results in increased sensitivity and lower limit of detection. By performing suitable experiments, the best condition for preparing the modified electrode and determining Fe(III) was selected. Under optimized conditions, the amperometric response is linear from 1 to 100 nM of Fe(III) with a detection limit of 0.23 nM. The validity of the method and applicability of the sensor is successfully tested by the determination of Fe(III) in drug and water real samples. This sensor opened a new platform based on doped nanoparticles for highly sensitive and selective detection of analytes.

The Formation Process and Mechanism of Carbon Dots Prepared from Aromatic Compounds as Precursors: A Review

Fluorescent carbon dots are a novel type of nanomaterial. Due to their excellent optical properties, they have extensive application prospects in many fields. Studying the formation process and fluorescence mechanism of CDs will assist scientists in understanding the synthesis of CDs and guide more profound applications. Due to their conjugated structures, aromatic compounds have been continuously used to synthesize CDs, with emissions ranging from blue to NIR. There is a lack of a systematic summary of the formation process and fluorescence mechanism of aromatic precursors to form CDs. In this review, the formation process of CDs is first categorized into three main classes according to the precursor types of aromatic compounds: amines, phenols, and polycyclics. And then, the fluorescence mechanism of CDs synthesized from aromatic compounds is summarized. The challenges and prospects are proposed in the last section.

Applications of Fluorescent Carbon Dots as Photocatalysts: A Review

Carbon dots (CDs) have attracted considerable interest from the scientific community due to their exceptional properties, such as high photoluminescence, broadband absorption, low toxicity, water solubility and (photo)chemical stability. As a result, they have been applied in several fields, such as sensing, bioimaging, artificial lighting and catalysis. In particular, CDs may act as sole photocatalysts or as part of photocatalytic nanocomposites. This study aims to provide a comprehensive review on the use of CDs as sole photocatalysts in the areas of hydrogen production via water splitting, photodegradation of organic pollutants and photoreduction and metal removal from wastewaters. Furthermore, key limitations preventing a wider use of CDs as photocatalysts are pointed out. It is our hope that this review will serve as a basis on which researchers may find useful information to develop sustainable methodologies for the synthesis and use of photocatalytic CDs.

Fabrication of white light emitting diodes via high yield surface passivated carbon quantum dots doped with terbium

Exploiting the unique characteristics of various materials to create novel hybrid materials opens up innovative possibilities for cutting-edge applications across numerous fields. Here, we have synthesized novel surface functionalized photoluminescent carbon quantum dots (CQDs) doped with a rare-earth element (Tb³⁺) for white light emitting diodes. High quantum yield CQDs were produced utilizing Plumeria leaves as a precursor using a one-step hydrothermal approach, and further, its optical characterization was thoroughly investigated. Herein, the functionalized CQDs demonstrate excitation-independent electroluminescence performance. The UV-LED chip and functionalized CQD were combined to create a device that emits cold white light with Commission Internationale de L'Eclairage coordinates of (0.33, 0.34), a corresponding correlated color temperature of 4995 K and color rendering index of 84.2.

Facile synthesis of graphene quantum dots with red emission and high quantum yield

Preparation of GQDs for application in cell imaging.