Terminal halogen-containing rod-like liquid crystals: Synthesis, self-assembly, photophysical and mechanochromism properties

Five series of cyanostilbene-based rod-like liquid crystals containing one different terminal atom (H, F, Cl, Br and I) at one end and one terminal aliphatic chain with different numbers of carbon atoms at the other end were reported by Suzuki coupling and Knoevenagel reactions. The influence of terminal halogen atoms and terminal chain length on the self-assembly, AIE behavior, temperature-dependent emission and mechanochromism behavior was explored by POM, DSC, XRD, SEM, absorption spectra and emission spectra. All the compounds are enantiotropic liquid crystals. The lowest non-halogen substituted homologue exhibited solo N phase, but the higher non-halogen substituted homologues exhibited mesogenic transition from SmA phase to N phase upon rising temperature. All the lowest halogen substituted homologues exhibited mesogenic transition from SmA phase to N phase upon rising temperature and all the higher homologues only exhibited SmA. The distinct mesogenic phase transition could be attributed to the intermolecular interaction produced by terminal halogen and the rigidity of the terminal aliphatic chain. All the non-halogen substituted compounds and halogen substituted compounds with smaller terminal halogen atom (F, Cl and Br atom) exhibited AIE behaviors, whereas the iodinated compounds exhibited extremely weak emission in solution and aggregated states due to the heavy atoms effect. These compounds also exhibited distinct solid-state emission with blue or cyan fluorescence, which could be quenched by increasing temperature. The reversible mechanochromism behavior was also achieved in all the compounds. The mechanical force induced quench in emission in non-halogen substituted compounds and halogen substituted compounds with smaller terminal halogen atom (F, Cl and Br atom), whereas enhancement in iodinated compounds. The reversible mechanochromism behavior endowed these compounds with potential applications in rewritable paper and anti-counterfeiting. The interesting properties in these liquid crystals would be attributed to the balance of the halogen-halogen interactions, heavy atom effect, steric-hindrance effect and chain length. These investigations would be helpful to understand the relationship between chemical structures and properties.

A supramolecular host matrix for preserving fluorescence in the solid-state

Fluorescent materials find numerous applications in light-based devices, but their utilization is severely affected by concentration caused quenching of fluorescence, the extreme form of which is the total loss of fluorescence in the solid state. Introduction of bulky substituents remains the most frequently applied fluorescence revival strategy, but requires multi-step synthetic modifications. We have demonstrated a simple one step supramolecular gel-based strategy to preserve the fluorescence in the solid state.

A Ligand-Directed Spatial Regulation to Structural and Functional Tunability in Aggregation-Induced Emission Luminogen-Functionalized Organic-Inorganic Nanoassemblies

Aggregation-induced emission luminogen (AIEgen)-functionalized organic-inorganic hybrid nanoparticles (OINPs) are an emerging category of multifunctional nanomaterials with vast potential applications. The spatial arrangement and positioning of AIEgens and inorganic compounds in AIEgen-functionalized OINPs determine the structures, properties, and functionalities of the self-assembled nanomaterials. In this work, a facile and general emulsion self-assembly tactic for synthesizing well-defined AIEgen-functionalized OINPs is proposed by coassembling alkane chain-functionalized inorganic nanoparticles with hydrophobic organic AIEgens. As a proof of concept, the self-assembly and structural evolution of plasmonic-fluorescent hybrid nanoparticles (PFNPs) from concentric circle to core shell and then to Janus structures is demonstrated by using alkane chain-modified AuNPs and AIEgens as building blocks. The spatial position of AuNPs in the signal nanocomposite is controlled by varying the alkane ligand length and density on the AuNP surface. The mechanism behind the formation of various PFNP nanostructures is also elucidated through experiments and theoretical simulation. The obtained PFNPs with diverse structures exhibit spatially tunable optical and photothermal properties for advanced applications in multicolor and multimode immunolabeling and photothermal sterilization. This work presents an innovative synthetic approach of constructing AIEgen-functionalized OINPs with diverse structures, compositions, and functionalities, thereby championing the progressive development of these OINPs.

A New Theranostic Platform Against Gram-Positive Bacteria Based on Near-Infrared-Emissive Aggregation-Induced Emission Nanoparticles

Infections induced by Gram-positive bacteria pose a great threat to public health. Antibiotic therapy, as the first chosen strategy against Gram-positive bacteria, is inevitably associated with antibiotic resistance selection. Novel therapeutic strategies for the discrimination and inactivation of Gram-positive bacteria are thus needed. Here, a specific type of aggregation-induced emission luminogen (AIEgen) with near-infrared fluorescence emission as a novel antibiotic-free therapeutic strategy against Gram-positive bacteria is proposed. With the combination of a positively charged group into a highly twisted architecture, self-assembled AIEgens (AIE nanoparticles (NPs)) at a relatively low concentration (5 µm) exhibited specific binding and photothermal effect against living Gram-positive bacteria both in vitro and in vivo. Moreover, toxicity assays demonstrated excellent biocompatibility of AIE NPs at this concentration. All these properties make the AIE NPs as a novel generation of theranostic platform for combating Gram-positive bacteria and highlight their promising potential for in vivo tracing of such bacteria.

Highly Luminescent TCNQ in Melamine

Optical properties of molecules change drastically as a result of interactions with surrounding environments as observed in solutions, clusters, and aggregates. Here, we make 7,7,8,8-tetracyanoquinodimethane (TCNQ) highly luminescent by encapsulating it in crystalline melamine. Colored single crystals are synthesized by slow evaporation of aqueous tetrahydrofuran solutions of melamine and TCNQ. Single-crystal X-ray diffraction reveals the lattice structure of pure melamine, meaning that the color is of impurities. Both mass spectrometry and UV-vis spectroscopy combined with density-functional theory calculations elucidate that the impurity species are neutral TCNQ and its oxidation product, dicyano-p-toluoyl cyanide anion (DCTC-), whose concentrations in a melamine crystal can be controlled by adjusting the molar ratio between melamine and TCNQ in the precursor solution. Fluorescence excitation-emission wavelength mappings on the precursor solutions illustrate dominant emissions from DCTC- while the emission from TCNQ is quenched by the resonance energy transfer to DCTC-. On the contrary, TCNQ in crystalline melamine is a bright fluorophore whose emission wavelength centered at 450 nm with internal quantum yields as high as 19% and slow fluorescence lifetimes of about 2 ns. The method of encapsulating molecules into transparent melamine would make many other molecules fluorescent in solids.

Synthesis of Intrinsically-Fluorescent Aliphatic Tautomeric Polymers for Proton-Conductivity, Dual-State Emission, and Sensing/Oxidation-Reduction of Metal Ions

Herein, fluorescent conducting tautomeric polymers (FCTPs) are developed by polymerizing 2-methylprop-2-enoic acid (MPEA), methyl-2-methylpropenoate (MMP), N-(propan-2-yl)prop-2-enamide (PPE), and in situ-anchored 3-(N-(propan-2-yl)prop-2-enamido)-2-methylpropanoic acid (PPEMPA). Among as-synthesized FCTPs, the most promising characteristics in FCTP3 are confirmed by NMR and Fourier transform infrared (FTIR) spectroscopies, luminescence enhancements, and computational studies. In FCTP3, ─C(═O)NH─, -C(═O)N<, ─C(═O)OH, and ─C(═O)OCH3 subluminophores are identified by theoretical calculations and experimental analyses. These subluminophores facilitate redox characteristics, solid state emissions, aggregation-enhanced emissions (AEEs), excited-state intramolecular proton transfer (ESIPT), and conductivities in FCTP3. The ESIPT-associated dual emission/AEEs of FCTP3 are elucidated by time correlated single photon counting (TCSPC) investigation, solvent polarity effects, concentration-dependent emissions, dynamic light scattering (DLS) measurements, field emission scanning electron microscopy images, and computational calculations. The cyclic voltammetry measurements of FCTP3 indicate cumulative redox efficacy of ─C(═O)OH, ─C(═O)NH─/-C(═O)N<, ─C(─O─)═NH+─/─C(─O─)═N+, and ─C(═N)OH functionalities. In FCTP3, ESIPT-associated dual-emission enable in the selective detection of Cr(III)/Cu(II) at λem1/λem2 with the limit of detection of 0.0343/0.079 ppb. The preferential interaction of Cr(III)/Cu(II) with FCTP3 (amide)/FCTP3 (imidol) and oxidation/reduction of Cr(III)/Cu(II) to Cr(VI)/Cu(I) are further supported by NMR-titration; FTIR and X-ray photoelectron spectroscopy analyses; TCSPC/electrochemical/DLS measurement; alongside theoretical calculations. The proton conductivity of FCTP3 is explored by electrochemical impedance spectroscopy and I-V measurements.

Manipulation of aurophilicity in constructed clusters of gold(I) complexes with boosted luminescence and smart responsiveness

High-performance luminescent gold(I) complexes have attracted considerable attention due to their potential applications in various fields, but their construction is a significantly challenging task. Herein, we designed and synthesized a series of novel dinuclear gold(I) complexes 1-4 based on 1,2-bis(diphenylphosphino)benzene and 1,4-bis(diphenylphosphino)benzene frameworks, where para-substitutions of benzene ring were employed for comparison and bulky t-butyl groups were introduced into carbazole ligands to assist flexibly regulating the aurophilicity. Among them, the structure of complex 1 was confirmed by single-crystal X-ray diffraction, and all the complexes exhibited typical aggregation-induced emission characteristics. Due to the construction of intramolecular aurophilicity and the formation of molecular clusters, noticeable enhancement of the luminescent efficiency was achieved for the core complex 1. Together with the introduction of flexible t-butyl groups, good responsiveness towards external mechanical force and solvent vapors were also realized. Moreover, the specific bioimaging ability of complex 1 towards cancer cells was demonstrated. Thus, this work presents the crucial capability of aurophilic manipulation in tuning the luminescence and smart behaviors of gold complexes, and it will open a new route to developing high-performance luminescent materials.

Selective Detection of Primary Aromatic Amines through Enhanced Luminescence of a 2D + 2D Inclined Polycatenated Microporous Nitro-Functionalized Metal-Organic Framework

Detection and sensing of amines through enhanced fluorescence emission are always challenging in aqueous solution. The range of different Lewis basicities, shapes, and sizes as well as the different structural arrangements of amines is responsible for their less specificity in aqueous solution. Here, we have designed a highly fluorescent emissive 2D + 2D → 3D inclined polycatenated NO2-functionalized flexible metal-organic framework (MOF) for selective segregation of electron-rich aromatic primary amines from electron-deficient amines in aqueous solution, showing different emission behaviors. The inclined polycatenated 2D + 2D → 3D MOF having an asymmetric unit {[Cd(dim)(2-nta)(H2O)](H2O)(MeOH)}n (1) has been synthesized by a slow diffusion process and characterized thoroughly by single-crystal and powder X-ray diffraction (PXRD) as well as other physicochemical methods. The desolvated species of 1 (Ref. MOF) is found to be stable and has been characterized by PXRD and adsorption study. The fluorescence profile of the Ref. MOF shows selective enhancement in the presence of electron-rich primary aromatic amines, while the same shows quenching for electron-deficient amines in aqueous solution. The Ref. MOF reported here consists of flexible space between two 2D layers that is responsible for different orientations for different analyte primary aromatic amines (PAAs) with different sizes. The above findings are also supported by time-resolved fluorescence spectroscopy. The respective fluorescence enhancement and quenching have been explained by the interaction between the CB of the host MOF and LUMO of guest amines. Therefore, this work presents an operable method for the sensing of PAAs using a single compound, which is a polycatenated MOF.

Degradation and mechanism of PFOA by peroxymonosulfate activated by nitrogen-doped carbon foam-anchored nZVI in aqueous solutions

Perfluorooctanoic acid (PFOA) is an emerging pollutant that is non-biodegradable and presents severe environmental and human health risks. In this study, we present an effective and mild approach for PFOA degradation that involves the use of nitrogen-doped carbon foam anchored with nanoscale zero-valent iron (nZVI@NCF) to activate low concentration peroxymonosulfate (PMS) for the treatment. The nZVI@NCF/PMS system efficiently removed 84.4% of PFOA (2.4 μM). The active sites of nZVI@NCF including Fe0 (110) and graphitic nitrogen played crucial roles in the degradation. Electrochemical analyses and density functional theory calculations revealed that nZVI@NCF acted as an electronic donor, transferring electrons to both PMS and PFOA during the reaction. By further analyzing the electron paramagnetic resonance and byproducts, it was determined that electron transfer and singlet oxygen were responsible for PFOA degradation. Three degradation pathways involving decarboxylation and surface reduction of PFOA in the nZVI@NCF/PMS system were determined. Finding from this study indicate that nZVI@NCF/PMS systems are effective in degrading PFOA and thus present a promising persulfate-advanced oxidation process technology for PFAS treatment.

Rofecoxib derivatives as NIR fluorescent probes for mitochondrial viscosity and in vivo imaging of Aβ plaques

Alzheimer's disease (AD) is a multifaceted neurodegenerative disorder for which the underlying causes remain largely unknown. Therefore, the development of imaging agents capable of detecting biomarkers associated with this disease is crucial. Dual-functional probes are particularly important as they can track two biomarkers at the same time and examine their interaction. Herein, Two red-emissive dual-functional fluorescent probes, RC-1 and RA-2, have been designed and synthesized based on the Rofecoxib scaffold. When probes (RC-1 and RA-2) are in viscous media or bound to Aβ aggregates, there is a dramatic enhancement in fluorescence emission due to the constraint of the twisted intramolecular charge transfer effect (TICT). RC-1 with ideal blood-brain barrier (BBB) penetrability enables visualization of Aβ plaques in vivo AD mice. These results suggest that RC-1 and RA-2 have the potential to serve as powerful fluorescence imaging agents for Aβ and mitochondria-related pathology in AD.

Self-Assembled Tamoxifen-Selective Fluorescent Nanomaterials Driven by Molecular Structural Similarity

Most supramolecular systems were discovered by using a trial-and-error approach, leading to numerous synthetic efforts to obtain optimal supramolecular building blocks for selective guest encapsulation. Here, we report a simple coassembly strategy for preparing tamoxifen-selective supramolecular nanomaterials in an aqueous solution. The synthetic amphiphile molecule, 1,1,2,2-tetraphenylethylene (TPE), promotes large tamoxifen aggregate disassembly into smaller, discrete aggregates such as ribbon-like and micellar assemblies in coassembled solutions, enhancing the solubility and dispersion. The TPE moiety exhibits enhanced emission upon tamoxifen interaction, enabling the observation of the coassembled species in an aqueous solution for cell imaging. The tamoxifen-selective fluorescent micelles in the presence of a 1:1 molar ratio of TPE derivative with tamoxifen show enhanced tamoxifen absorption and anticancer effects against MCF-7 breast cancer cells. These supramolecular approaches, based on the coassembly of building blocks with molecular structural similarity, can provide a novel strategy for the efficient development of selective molecular carriers with enhanced biological activities.

Synthesis of an aggregation-induced emission (AIE) dye with pH-sensitivity based on tetraphenylethylene-pyridine for fluorescent nanoparticles and its applications in bioimaging and in vitro anti-tumor effect

In this contribution, a novel AIE monomers 2-(4-styrylphenyl)- 1,2-diphenylvinyl)styryl)pyridine (SDVPY) with smart fluorescent pH-sensitivity basing on tetraphenylethylene-pyridine were successfully synthesized for the first time, subsequently, a series of amphiphilic copolymers PEG-PY were achieved by reversible addition-fragmentation chain transfer (RAFT) polymerization of SDVPY and poly(ethylene glycol) methacrylate (PEGMA), which would self-assemble in water solution to form core-shell nanoparticles (PEG-PY FONs) with about 150 nm diameter. The PEG-PY FONs showed obvious fluorescence response to Fe3+, HCO3- and CO32- ions in aqueous solution owing to their smart pH-sensitivity and AIE characteristics, and their maximum emission wavelength could reversibly change from 525 nm to 624 nm. The as-prepared PEG-PY FONs showed also prospective application in cells imaging with the variable fluorescence for different pH cells micro-environment. When PEG-PY copolymers self-assembled with the anti-tumor drug paclitaxel (PTX), the obtained PY-PTX FONs could effectively deliver and release PTX with pH-sensitivity, and could be easily internalized by A549 cells and located at the cytoplasm with high cytotoxicity, which was further confirmed by the Calcein-AM/PI staining of dead and alive A549 cells. Moreover, the flow cytometry results indicated that the PY-PTX FONs could obviously induce the apoptosis of A549 cells, which further showed the great potential of PY-PTX FONs in the application of tumors therapy.

A 3D nanoscale optical disk memory with petabit capacity

High-capacity storage technologies are needed to meet our ever-growing data demands1,2. However, data centres based on major storage technologies such as semiconductor flash devices and hard disk drives have high energy burdens, high operation costs and short lifespans2,3. Optical data storage (ODS) presents a promising solution for cost-effective long-term archival data storage. Nonetheless, ODS has been limited by its low capacity and the challenge of increasing its areal density4,5. Here, to address these issues, we increase the capacity of ODS to the petabit level by extending the planar recording architecture to three dimensions with hundreds of layers, meanwhile breaking the optical diffraction limit barrier of the recorded spots. We develop an optical recording medium based on a photoresist film doped with aggregation-induced emission dye, which can be optically stimulated by femtosecond laser beams. This film is highly transparent and uniform, and the aggregation-induced emission phenomenon provides the storage mechanism. It can also be inhibited by another deactivating beam, resulting in a recording spot with a super-resolution scale. This technology makes it possible to achieve exabit-level storage by stacking nanoscale disks into arrays, which is essential in big data centres with limited space.

AIE-based ratiometric fluorescent probe for mercury ion, medium-dependent fluorescence color change and optimized sensitivity in solid state

A new AIE-based luminogen TPES, as a ratiometric fluorescence probe for mercury(II) was readily synthesized. The probe combined the advantages of the outstanding specificity of Hg2+-triggered deprotection reaction of thioketal and the brilliant emission of AIEgens in aggregated state. Once encountered aqueous Hg2+, fluorescent color of TPES in THF-H2O (fw = 98%) altered from blue to green rapidly, while other metal cations gave no interference to the probe. And the mechanism of this chemosensor was carefully verified by 1H NMR analysis, FTIR and MS spectra. As expected, TPES exhibits excellent selectivity and sensitivity towards Hg2+ in the solid state. When using filter paper as the solid medium, the fabricated test strips could signify Hg2+ ions with the LOD as 1 × 10-5 M (Hg2+ in aqueous solution), accompanied with a distinct emitting altered from blue to green. Furthermore, by changing the medium from filter paper to silica gel plate, a more significant fluorescence alteration from blue to yellow was achieved, and the LOD was further optimized to 1 × 10-6 M as discerned by naked-eye.

Pressure-induced luminescence evolution of 3,3'-diamino-4,4'-azofurazan: Role of restricting chemical bond vibration and conformational modification

The luminescence and electronic structure of 3,3'-Diamino-4,4'-azofurazan (DAAzF) were studied under high pressure conditions through experimental and calculation approaches. The transition of π* → π was primarily responsible for DAAzF's broad light emission. Upon applying pressure to DAAzF, high-pressure-stiffened hydrogen-bond interactions enable the restriction of the stretching vibration of NH2 group. The reduced energy loss through nonradiative rotational relaxation and molecular motions lead to a ∼20 times luminescent enhancement of DAAzF from 1 atm to 8.9 GPa. With the further strengthening of interlayer hydrogen bond interactions at higher pressure, the deviation of hydrogen atoms in amino groups from the molecular plane lessens the radiation transition efficiency. In addition, the bending of the C-C-N=N bond further leads to molecular conformation changes at approximately 20.7 GPa, which induces an abrupt redshift and moderate quenching of the luminescence. Furthermore, the band gap of DAAzF is significantly influenced by pressure. As the color undergoes a transition from yellow to red, and becomes darker as the pressure increases, the absorption edge shifted towards red. At 3.4, 9, and 21 GPa, three conformational variations were identified in conjunction with electronic structural alterations.

Capturing Doublet Intermediate Emitters by Chemically Crosslinking Confinement towards Spatiotemporal Encryption

Photoluminescence is one of the most meticulous ways to manipulate light energy. Typical photoluminescent emitters are mostly stable substances with a pure photophysical process of spontaneous photon-emission from their excited states. Intermediate emitters are elusive attributing to their synchronous energy transfer process including photophysical and incomplete photochemical pathways. An intermediate emitter containing radicals is more difficult to be observed due to its inherent chemical reactivity. Here, these challenges are overcome by spontaneously formed space limitations in polymer crosslinking networks meanwhile chemically active intermediates are captured. These doublet intermediates exhibit unique long-wavelength emissions under chemically crosslinking confinement conditions, and their luminous mechanism provides a novel perspective for designing intermediate emitters with liquid-crystal character and photoresponsive features towards spatiotemporal encryption, promising for the detection of photochemical reactions and the development of fascinating luminescent systems.

A Photoactivatable Luminescent Motif through Ring-Flipping Isomerization for Multiple Photopatterning

Photoactivatable luminescent materials have garnered enormous attention in the field of intelligent responsive materials, yet their design and applications remain challenging due to the limited variety of photoactivatable motifs. In the work described herein, we discovered a new photoactivatable luminescent motif that underwent ring-flipping isomerization under UV irradiation. The emission of this motif exhibited a rapid transformation from dark yellow to bright green, accompanied by a significant enhancement of quantum yield from 1.9% to 34.2%. Experimental and theoretical studies revealed that the effective intramolecular motion (EIM) was crucial to the distinct luminescence performance between two isomers. In addition, polymers containing this motif were achieved through a one-pot alkyne polymerization, exhibiting both photofluorochromic and photo-cross-linking properties. Furthermore, multiple types of photopatterning, including luminescent encryption, fluorescent grayscale imaging, and high-resolution photolithographic patterns, were realized. This work developed a new photoactivatable luminescent motif and demonstrated its potential applications in both small molecules and macromolecules, which will help in the future design of photoactivatable luminescent materials.

Aggregation-Induced Emission via the Restriction of the Intramolecular Vibration Mechanism of Pinacol Lanthanide Complexes

Pinacol lanthanide complexes PyraLn (Ln = Dy and Tb) with the restriction of intramolecular vibration were obtained for the first time via an in situ solvothermal coordination-catalyzed tandem reaction using cheap and simple starting materials, thereby avoiding complex, time-consuming, and expensive conventional organic synthesis strategies. A high-resolution electrospray ionization mass spectrometry (HRESI-MS) analysis confirmed the stability of PyraLn in an organic solution. The formation process of PyraLn was monitored in detail using time-dependent HRESI-MS, which allowed for proposing a mechanism for the formation of pinacol complexes via in situ tandem reactions under one-pot coordination-catalyzed conditions. The PyraLn complexes constructed using a pinacol ligand with a butterfly configuration exhibited distinct aggregation-induced emission (AIE) behavior, with the αAIE value as high as 60.42 according to the AIE titration curve. In addition, the PyraLn complexes in the aggregated state exhibit a rapid photoresponse to various 3d metal ions with low detection limits. These findings provide fast, facile, and high-yield access to dynamic, smart lanthanide complex emissions with bright emission and facilitate the rational construction of molecular machines for artificial intelligence.

Exploring Various Photochemical Processes in Optical Sensing of Pesticides by Luminescent Nanomaterials: A Concise Discussion on Challenges and Recent Advancements

Food safety is a burning global issue in this present era. The prevalence of harmful food additives and contaminants in everyday food is a significant cause for concern as they can adversely affect human health. More particularly, among the different food contaminants, the use of excessive pesticides in agricultural products is severely hazardous. So, the optical detection of residual pesticides is an effective strategy to counter the hazardous effect and ensure food safety. In this perspective, nanomaterials have played a leading role in defending the open threat against food safety instigated by the reckless use of pesticides. Now, nanomaterial-based optical detection of pesticides has reached full pace and needs an inclusive discussion. This Review covers the advancement of photoprocess-based optical detection of pesticides categorically using nanomaterials. Here, we have thoroughly dissected the photoprocesses (aggregation and aggregation-induced emission (AIE), charge transfer and intramolecular charge transfer (ICT), electron transfer and photoinduced electron transfer (PET), fluorescence resonance energy transfer (FRET), hydrogen bonding, and inner filter effect) and categorically demarcated their significant role in the optical detection of pesticides by luminescent nanomaterials over the last few years.

Recent progress on polymerization-induced emission

The aggregate luminescence behaviors of polymeric luminescent materials have been attracting great attention. However, the importance of the polymerization process on luminescence, namely, polymerization-induced emission (PIE), has rarely been overviewed. In this review, recent advances in polymerization with PIE effects are summarized, including PIE with aromatic rings based on one-/two-/multi-component polymerizations, and PIE without aromatic rings according to disparate mechanisms of polymerizations. Typical examples are selected to elaborate the basic design principles, as well as the properties and potential applications of the luminous polymers. Moreover, the challenges and perspectives in this area are also discussed.

Branched Copolymers with Tunable Clusteroluminescence in High Quantum Yield

A novel type of fluorescence without large conjugated structures called clusteroluminescence (CL) has attracted a great deal of attention in recent years. Despite its many advantages, the emerging CL still encounters difficulties of low quantum yield (QY) and preliminary mechanisms. In this work, the branched structure was introduced into poly(maleic anhydride-alt-vinyl acetate) by chain transfer monomer. The emission wavelength of the branched copolymers is red-shifted with the increase of branching degree, and the absolute QY of solids can reach up to 29.87%. Further characterizations reveal that the branched structure can improve the flexibility of polymer chains, thereby promoting the intrachain interactions of subgroups. Furthermore, in the case of branched anhydride copolymers, the equilibrium between intrachain interactions and nonradiative transitions holds a crucial significance in determining the QY. This endeavor not only offers new insights into the mechanism of CL but also presents a novel approach to surmount the low QY of anhydride copolymers, thus broadening the horizons of CLgens to unexplored domains.

Functionalized Fluorescent Organic Nanoparticles Based AIE Enabling Effectively Targeting Cancer Cell Imaging

We report a fluorescent dye TM by incorporating the tetraphenylethylene (TPE) and cholesterol components into perylene bisimides (PBI) derivative. Fluorescence emission spectrum shows that the dye has stable red emission and aggregation-induced emission (AIE) characteristics. The incorporation of cholesterol components triggers TM to show induced chirality through supramolecular self-assembly. The cRGD-functionalized nanoparticles were prepared by encapsulating fluorescent dyes with amphiphilic polymer matrix. The functionalized fluorescent organic nanoparticles exhibit excellent biocompatibility, large Stokes' shift and good photostability, which make them effective fluorescent probes for targeting cancer cells with high fluorescence contrast.

Tunable Fluorescence and Morphology of Aggregates Built from a Mechanically Bonded Amphiphilic Bistable [2]Rotaxane

Advanced Organic Chemical Materials Co-constructed Mechanically bonded amphiphiles (MBAs), also known as mechanically interlocked molecules (MIMs), have emerged as an important kind of functional building block for the construction of artificial molecular machines and soft materials. Herein, a novel MBA, i. e., bistable [2]rotaxane H2 was designed and synthesized. In the solution state, H2 demonstrated pH and metal ion-responsive emissions due to the presence of a distance-dependent photoinduced electron transfer (PET) process and the fluorescence resonance energy transfer (FRET) process, respectively. Importantly, the amphiphilic feature of H2 has endowed it with unique self-assembly capability, and nanospheres were obtained in a mixed H2 O/CH3 CN solvent. Moreover, the morphology of H2 aggregates can be tuned from nanospheres to vesicles due to the pH-controlled shuttling motion-induced alternation of H2 amphiphilicity. Interestingly, larger spheres with novel pearl-chain-like structures from H2 were observed after adding stoichiometric Zn2+ . In particular, H2 shows pH-responsive emissions in its aggregation state, allowing the visualization of the shuttling movement by just naked eyes. It is assumed that the well-designed [2]rotaxane, and particularly the proposed concept of MBA shown here, will further enrich the families of MIMs, offering prospects for synthesizing more MIMs with novel assembly capabilities and bottom-up building dynamic smart materials with unprecedented functions.

Triphenylamine-Based N,O-Bidentate BF2 -Enolimine Initiator for Three-Arm Star Polymethacrylates with Dual-State Fluorescent Emission

Three-arm star polymethacrylates with dual-phase (solution and solid-state) fluorescent emission have been synthesized via atom transfer radical polymerization (ATRP) using a triphenylamine-derived organboron complex (TAPA-BKI-3Br) as initiator. The as-synthesized three-arm star polymethacrylates exhibited bright emission in both solution and the solid states due to the highly twisted structure and intramolecular charge transfer (ICT) effect of TAPA-BKI core, as well as the steric effect and restriction of intramolecular motions from the polymer arms. And the polymer chains have an important influence on the photophysical behavior of the as-synthesized three-arm star polymethacrylates in the aggregated state.

Molecular torsion controls the excited state relaxation pathways of multibranched tetraphenylpyrazines: effect of substitution of morpholine vs. phenoxazine

Multibranched donor-acceptor derivatives exhibiting desirable photophysical properties are efficiently used in optoelectronic devices, in which the excited state relaxation dynamics of the derivatives control the efficiency of the devices. Here, the effect of intramolecular torsion on the excited state relaxation dynamics of tetraphenylpyrazine (TPP) derivatives in non-polar (toluene) and polar (THF) solvents is investigated by substituting the electron donor of morpholine (TPP-4MOP) and phenoxazine (TPP-4PHO) leading to the planar and twisted configurations, respectively, using femtosecond and nanosecond transient absorption spectroscopy. In the steady state, TPP-4MOP showed feeble emission (ΦF ∼0.03) due to the weak donor by the delocalization of electron density supported by theoretical optimization. The TPP-4PHO exhibited strong emission (ΦF ∼0.18) in toluene compared to that in THF, in which it showed a large Stokes shift (∼9691 cm-1) with low fluorescence quantum yield (ΦF ∼0.01). The observation of large Stokes shifts, inherent nature and theoretical calculations of TPP-4PHO suggest the twisting of the dihedral angle between tetraphenylpyrazine and phenoxazine in the excited state leading to the twisted intramolecular charge transfer state (TICT). The femtosecond and nanosecond transient absorption and picosecond time-resolved emission spectra of TPP-4PHO revealed the signature of the existence of both the partial TICT and TICT states in THF leading to the triplet state. Whereas in the case of TPP-4MOP, the transient absorption spectra showed the formation of the triplet state from the local excited state without the involvement of the TICT state. Aggregation studies of TPP-4PHO in a THF and water mixture reflect the elimination of the TICT state by the restriction of intramolecular torsion in the aggregates leading to an increase of 12-fold of the fluorescence intensity along with shifting of the maximum towards the blue region. These studies revealed that the excited state relaxation pathways of the derivatives are controlled by polarity-dependent torsional motion.

Aggregation behaviour of pyrene-based luminescent materials, from molecular design and optical properties to application

Molecular aggregates are self-assembled from multiple molecules via weak intermolecular interactions, and new chemical and physical properties can emerge compared to their individual molecule. With the development of aggregate science, much research has focused on the study of the luminescence behaviour of aggregates rather than single molecules. Pyrene as a classical fluorophore has attracted great attention due to its diverse luminescence behavior depending on the solution state, molecular packing pattern as well as morphology, resulting in wide potential applications. For example, pyrene prefers to emit monomer emission in dilute solution but tends to form a dimer via π-π stacking in the aggregation state, resulting in red-shifted emission with quenched fluorescence and quantum yield. Over the past two decades, much effort has been devoted to developing novel pyrene-based fluorescent molecules and determining the luminescence mechanism for potential applications. Since the concept of "aggregation-induced emission (AIE)" was proposed by Tang et al. in 2001, aggregate science has been established, and the aggregated luminescence behaviour of pyrene-based materials has been extensively investigated. New pyrene-based emitters have been designed and synthesized not only to investigate the relationships between the molecular structure and properties and advanced applications but also to examine the effect of the aggregate morphology on their optical and electronic properties. Indeed, new aggregated pyrene-based molecules have emerged with unique properties, such as circularly polarized luminescence, excellent fluorescence and phosphorescence and electroluminescence, ultra-high mobility, etc. These properties are independent of their molecular constituents and allow for a number of cutting-edge technological applications, such as chemosensors, organic light-emitting diodes, organic field effect transistors, organic solar cells, Li-batteries, etc. Reviews published to-date have mainly concentrated on summarizing the molecular design and multi-functional applications of pyrene-based fluorophores, whereas the aggregation behaviour of pyrene-based luminescent materials has received very little attention. The majority of the multi-functional applications of pyrene molecules are not only closely related to their molecular structures, but also to the packing model they adopt in the aggregated state. In this review, we will summarize the intriguing optoelectronic properties of pyrene-based luminescent materials boosted by aggregation behaviour, and systematically establish the relationship between the molecular structure, aggregation states, and optoelectronic properties. This review will provide a new perspective for understanding the luminescence and electronic transition mechanism of pyrene-based materials and will facilitate further development of pyrene chemistry.

Tetraphenylethene-Based Cross-Linked Conjugated Polymer Nanoparticles for Efficient Detection of 2,4,6-Trinitrophenol in Aqueous Phase

The cross-linked conjugated polymer poly(tetraphenylethene-co-biphenyl) (PTPEBP) nanoparticles were prepared by Suzuki-miniemulsion polymerization. The structure, morphology, and pore characteristics of PTPEBP nanoparticles were characterized by FTIR, NMR, SEM, and nitrogen adsorption and desorption measurements. PTPEBP presents a spherical nanoparticle morphology with a particle size of 56 nm; the specific surface area is 69.1 m2/g, and the distribution of the pore size is centered at about 2.5 nm. Due to the introduction of the tetraphenylethene unit, the fluorescence quantum yield of the PTPEBP nanoparticles reaches 8.14% in aqueous dispersion. Combining the porosity and nanoparticle morphology, the fluorescence sensing detection toward nitroaromatic explosives in the pure aqueous phase has been realized. The Stern-Volmer quenching constant for 2,4,6-trinitrophenol (TNP) detection is 2.50 × 104 M-1, the limit of detection is 1.07 μM, and the limit of quantification is 3.57 μM. Importantly, the detection effect of PTPEBP nanoparticles toward TNP did not change significantly after adding other nitroaromatic compounds, indicating that the anti-interference and selectivity for TNP detection in aqueous media is remarkable. In addition, the spike recovery test demonstrates the potential of PTPEBP nanoparticles for detecting TNP in natural environmental water samples.

Impact of polymer chain packing and crystallization on the emission behavior of curcumin-embedded poly(L-lactide)s

The development of biodegradable and biocompatible fluorescent materials with tunable emission in the solid state has become increasingly relevant for smart packaging and biomedical applications. Molecular packing and conformations play a critical role in tuning the solid-state photophysical properties of fluorescent materials. In this work, tunable emission of bioactive curcumin was achieved through the manipulation of the crystallization conditions and the polymorphic form of covalently linked poly(L-lactide) in the curcumin-embedded poly(L-lactide) (curcumin-PLLA). In the melt-crystallized curcumin-PLLA, with the increase in the isothermal crystallization temperature, a bathochromic shift in the fluorescence of curcumin-PLLA was observed due to the change in the intramolecular conjugation length of curcumin. The change in the isothermal crystallization temperature of curcumin-PLLA resulted in the rotation of the terminal phenyl rings of curcumin with respect to the central keto-enol group due to the covalently linked helical PLLA chains. In addition, solvent-induced single crystals and a gel of curcumin-PLLA were prepared and the influence of the polymorphic form of PLLA on the emission behavior of curcumin-PLLA was investigated. The results suggest that the polymer chain packing, crystallization conditions, morphology, and polymorphic form could play an influential role in dictating the fluorescence properties of fluorophore-embedded polymers.

A Cascade Strategy Boosting Hydroxyl Radical Generation with Aggregation-Induced Emission Photosensitizers-Albumin Complex for Photodynamic Therapy

Effective photodynamic therapy (PDT) requires photosensitizers (PSs) to massively generate type I reactive oxygen species (ROS) in a less oxygen-dependent manner in the hypoxia tumor microenvironment. Herein, we present a cascade strategy to boost type I ROS, especially hydroxyl radical (OH·-), generation with an aggregation-induced emission (AIE) photosensitizer-albumin complex for hypoxia-tolerant PDT. The cationic AIE PS TPAQ-Py-PF6 (TPA = triphenylamine, Q = anthraquinone, Py = pyridine) contains three important moieties to cooperatively enhance free radical generation: the AIE-active TPA unit ensures the effective triplet exciton generation in aggregate, the anthraquinone moiety possesses the redox cycling ability to promote electron transfer, while the cationic methylpyridinium cation further increases intramolecular charge transfer and electron separation processes. Inserting the cationic TPAQ-Py-PF6 into the hydrophobic domain of bovine serum albumin nanoparticles (BSA NPs) could greatly immobilize its molecular geometry to further increase triplet exciton generation, while the electron-rich microenvironment of BSA ultimately leads to OH·- generation. Both experimental and theoretical results confirm the effectiveness of our molecular cationization and BSA immobilization cascade strategy for enhancing OH·- generation. In vitro and in vivo experiments validate the excellent antitumor PDT performance of BSA NPs, superior to the conventional polymeric encapsulation approach. Such a multidimensional cascade strategy for specially boosting OH·- generation shall hold great potential in hypoxia-tolerant PDT and related antitumor applications.

Interfacial Passivation Enormously Enhances Electroluminescence of Triphenylphosphine Cu4 I4 Cube

Defect is one of the key factors limiting optoelectronic performances of organic-inorganic hybrid systems. Although high-efficiency bidentate ligands based electroluminescent (EL) clusters reported, until present, only few EL clusters based on monodentate ligands are realized since their structural instability induces more surface/interface defects. Herein, this bottleneck is first overcome in virtue of interfacial passivation by electron transporting layers (ETL). Through using TmPyPB with meta-linked pyridines as ETL, photoluminescent (PL) and EL quantum efficiencies of the simplest monophosphine Cu4 I4 cube [TPP]4 Cu4 I4 are greatly improved by ≈2 and 23 folds, respectively, as well as ≈200 folds increased luminance, corresponding to a huge leap from nearly unlighted (<20 nits) to highly bright (>3000 nits). The passivation effect of TmPyPB on surface defects of cluster layer is embodied as preventing interfacial charge trapping and suppressing exciton nonradiation.

Reversible and Turn-On Fluorescence Detection of Phosphate in Aqueous Solution and Living Cell Imaging by Supramolecular Metallacycles with AIE-Active Ligands

Luminescent supramolecular metallacycles have attracted great interest as a new promising class of sensing substrates. In this work, two tetraphenylethene (TPE)-based diimidazole and dipyrazole ligands with the aggregation-induced emission (AIE) feature were designed for the construction of supramolecular tetragonal metallacycles 1-4 with two 90° mononuclear [(bpy)M]2+ or dinuclear [(bpy)2M2]4+ acceptors (bpy = 2,2'-dipyridine; M = Pd, Pt), in which the fluorescence can be quenched to an "off" state due to the ligand-to-metal charge transfer (LMCT). Metallacycle 1 was utilized as a fluorescence sensor for phosphate (PO43-) detection in aqueous solution by means of disassembly, leading to the release of the ligand. Additionally, the metallacycle can be regenerated through self-assembly via the introduction of Pd(II) acceptors. PO43- was detected using TPE-based metallacycles over a wide concentration range, with a detection limit as low as 2.1 × 10-8 M. Furthermore, sensor 1 also presented the semiquantitative visual detection ability for PO43- in the test paper mode via fluorescence changes. The aforementioned studies not only enhance the current research on fluorescent materials but also offer a strategy for the creation of stimuli-responsive supramolecular coordination complexes.

Advancements in Biosensors Based on the Assembles of Small Organic Molecules and Peptides

Over the past few decades, molecular self-assembly has witnessed tremendous progress in a variety of biosensing and biomedical applications. In particular, self-assembled nanostructures of small organic molecules and peptides with intriguing characteristics (e.g., structure tailoring, facile processability, and excellent biocompatibility) have shown outstanding potential in the development of various biosensors. In this review, we introduced the unique properties of self-assembled nanostructures with small organic molecules and peptides for biosensing applications. We first discussed the applications of such nanostructures in electrochemical biosensors as electrode supports for enzymes and cells and as signal labels with a large number of electroactive units for signal amplification. Secondly, the utilization of fluorescent nanomaterials by self-assembled dyes or peptides was introduced. Thereinto, typical examples based on target-responsive aggregation-induced emission and decomposition-induced fluorescent enhancement were discussed. Finally, the applications of self-assembled nanomaterials in the colorimetric assays were summarized. We also briefly addressed the challenges and future prospects of biosensors based on self-assembled nanostructures.

Inherently Fluorescent Peanut-Shaped Polymersomes for Active Cargo Transportation

Nanomotors have been extensively explored for various applications in nanomedicine, especially in cargo transportation. Motile properties enable them to deliver pharmaceutical ingredients more efficiently to the targeted site. However, it still remains a challenge to design motor systems that are therapeutically active and can also be effectively traced when taken up by cells. Here, we designed a nanomotor with integrated fluorescence and therapeutic potential based on biodegradable polymersomes equipped with aggregation-induced emission (AIE) agents. The AIE segments provided the polymersomes with autofluorescence, facilitating the visualization of cell uptake. Furthermore, the membrane structure enabled the reshaping of the AIE polymersomes into asymmetric, peanut-shaped polymersomes. Upon laser irradiation, these peanut polymersomes not only displayed fluorescence, but also produced reactive oxygen species (ROS). Because of their specific shape, the ROS gradient induced motility in these particles. As ROS is also used for cancer cell treatment, the peanut polymersomes not only acted as delivery vehicles but also as therapeutic agents. As an integrated platform, these peanut polymersomes therefore represent an interesting delivery system with biomedical potential.

Aggregates-based fluorescence sensing technology for food hazard detection: Principles, improvement strategies, and applications

Aggregates often exhibit modified or completely new properties compared with their molecular elements, making them an extraordinarily advantageous form of materials. The fluorescence signal change characteristics resulting from molecular aggregation endow aggregates with high sensitivity and broad applicability. In molecular aggregates, the photoluminescence properties at the molecular level can be annihilated or elevated, leading to aggregation-causing quenching (ACQ) or aggregation-induced emission (AIE) effects. This change in photoluminescence properties can be intelligently introduced in food hazard detection. Recognition units can combine with the aggregate-based sensor by joining the aggregation process, endowing the sensor with the high specificity of analytes (such as mycotoxins, pathogens, and complex organic molecules). In this review, aggregation mechanisms, structural characteristics of fluorescent materials (including ACQ/AIE-activated), and their applications in food hazard detection (with/without recognition units) are summarized. Because the design of aggregate-based sensors may be influenced by the properties of their components, the sensing mechanisms of different fluorescent materials were described separately. Details of fluorescent materials, including conventional organic dyes, carbon nanomaterials, quantum dots, polymers and polymer-based nanostructures and metal nanoclusters, and recognition units, such as aptamer, antibody, molecular imprinting, and host-guest recognition, are discussed. In addition, future trends of developing aggregate-based fluorescence sensing technology in monitoring food hazards are also proposed.

Phase-Separating Peptides Recruiting Aggregation-Induced Emission Fluorogen for Rapid E. coli Detection

Rationally designed biomolecular condensates have found applications primarily as drug-delivery systems, thanks to their ability to self-assemble under physico-chemical triggers (such as temperature, pH, or ionic strength) and to concomitantly trap client molecules with exceptionally high efficiency (>99%). However, their potential in (bio)sensing applications remains unexplored. Here, we describe a simple and rapid assay to detect E. coli by combining phase-separating peptide condensates containing a protease recognition site, within which an aggregation-induced emission (AIE)-fluorogen is recruited. The recruited AIE-fluorogen's fluorescence is easily detected with the naked eye when the samples are viewed under UV-A light. In the presence of E. coli, the bacteria's outer membrane protease (OmpT) cleaves the phase-separating peptides at the encoded protease recognition site, resulting in two shorter peptide fragments incapable of liquid-liquid phase separation. As a result, no condensates are formed and the fluorogen remains non-fluorescent. The assay feasibility was first tested with recombinant OmpT reconstituted in detergent micelles and subsequently confirmed with E. coli K-12. In its current format, the assay can detect E. coli K-12 (10⁸ CFU) within 2 h in spiked water samples and 1-10 CFU/mL with the addition of a 6-7 h pre-culture step. In comparison, most commercially available E. coli detection kits can take anywhere from 8 to 24 h to report their results. Optimizing the peptides for OmpT's catalytic activity can significantly improve the detection limit and assay time. Besides detecting E. coli, the assay can be adapted to detect other Gram-negative bacteria as well as proteases having diagnostic relevance.

Mitochondria-Targeted Fluorescent Nanoparticles with Large Stokes Shift for Long-Term BioImaging

Mitochondria (MITO) play a significant role in various physiological processes and are a key organelle associated with different human diseases including cancer, diabetes mellitus, atherosclerosis, Alzheimer's disease, etc. Thus, detecting the activity of MITO in real time is becoming more and more important. Herein, a novel class of amphiphilic aggregation-induced emission (AIE) active probe fluorescence (AC-QC nanoparticles) based on a quinoxalinone scaffold was developed for imaging MITO. AC-QC nanoparticles possess an excellent ability to monitor MITO in real-time. This probe demonstrated the following advantages: (1) lower cytotoxicity; (2) superior photostability; and (3) good performance in long-term imaging in vitro. Each result of these indicates that self-assembled AC-QC nanoparticles can be used as effective and promising MITO-targeted fluorescent probes.

A Brain-Targeting NIR-II Ferroptosis System: Effective Visualization and Oncotherapy for Orthotopic Glioblastoma

Near-infrared-II (NIR-II) ferroptosis activators offer promising potentials in in vivo theranostics of deep tumors, such as glioma. However, most cases are nonvisual iron-based systems that are blind for in vivo precise theranostic study. Additionally, the iron species and their associated nonspecific activations might trigger undesired detrimental effects on normal cells. Considering gold (Au) is an essential cofactor for life and it can specifically bind to tumor cells, Au(I)-based NIR-II ferroptosis nanoparticles (TBTP-Au NPs) for brain-targeted orthotopic glioblastoma theranostics are innovatively constructed. It achieves the real-time visual monitoring of both the BBB penetration and the glioblastoma targeting processes. Moreover, it is first validated that the released TBTP-Au specifically activates the effective heme oxygenase-1-regulated ferroptosis of glioma cells to greatly extend the survival time of glioma-bearing mice. This new ferroptosis mechanism based on Au(I) may open a new way for the fabrication of advanced and high-specificity visual anticancer drugs for clinical trials.

BODIPY as a Multifunctional Theranostic Reagent in Biomedicine: Self-Assembly, Properties, and Applications

The use of boron dipyrromethene (BODIPY) in biomedicine is reviewed. To open, its synthesis and regulatory strategies are summarized, and inspiring cutting-edge work in post-functionalization strategies is highlighted. A brief overview of assembly model of BODIPY is then provided: BODIPY is introduced as a promising building block for the formation of single- and multicomponent self-assembled systems, including nanostructures suitable for aqueous environments, thereby showing the great development potential of supramolecular assembly in biomedicine applications. The frontier progress of BODIPY in biomedical application is thereafter described, supported by examples of the frontiers of biomedical applications of BODIPY-containing smart materials: it mainly involves the application of materials based on BODIPY building blocks and their assemblies in fluorescence bioimaging, photoacoustic imaging, disease treatment including photodynamic therapy, photothermal therapy, and immunotherapy. Lastly, not only the current status of the BODIPY family in the biomedical field but also the challenges worth considering are summarized. At the same time, insights into the future development prospects of biomedically applicable BODIPY are provided.

Julolidine based red emitting ESIPT/AIE active material showing luminescence beyond excimer emission: An "on-off" emission response to Cu2

A new julolidine-fluorene based excited state intramolecular proton transfer (ESIPT)/aggregate induced emission (AIE) active Schiff-base (JDF) has been synthesized and evaluated for its photophysical properties in solution and aggregated/solid states. The correlation between the emission behavior and the solid state crystal packing structure revealed the interplay of ESIPT coupled excimer reaction occurring in the solid state, which is one of the rare examples reported so far. For a comprehensive comparison, we synthesized a non-ESIPT methyl derivative (JDF-Me) of JDF capable of showing excimer emission only in the solid state. Further, JDF exhibits normal as well as keto emission in solution, upon addition of water, its poor solvent, that promotes aggregation, the fluorescence emission shows the preponderance of the excimer band in the low energy region. It was also interesting to note that in the solid state (thin films), JDF shows emission beyond the excimer emission, which is wavelength dependent. This is attributed to the formation of diverse clusters leading to the extended delocalization beyond excimers, and represents a clustering-triggered emission ascribing bright red color to the solid JDF. Such mélange of emission characteristics of JDF are responsible for the multicolor emission covering a broad range of electromagnetic spectrum, which is demonstrated by the confocal microscopy images of the JDF recorded in different states. Further, in its aggregated state, JDF recognized Cu²⁺ ions, selectively, manifested in the form of emission quenching via the interaction of Cu²⁺ ions with the oxygen and nitrogen atoms of JDF inhibiting the excimer formation.

Multicomponent synthesis of chromophores – The one-pot approach to functional π-systems

Multicomponent reactions, conducted in a domino, sequential or consecutive fashion, have not only considerably enhanced synthetic efficiency as one-pot methodology, but they have also become an enabling tool for interdisciplinary research. The highly diversity-oriented nature of the synthetic concept allows accessing huge structural and functional space. Already some decades ago this has been recognized for life sciences, in particular, lead finding and exploration in pharma and agricultural chemistry. The quest for novel functional materials has also opened the field for diversity-oriented syntheses of functional π-systems, i.e. dyes for photonic and electronic applications based on their electronic properties. This review summarizes recent developments in MCR syntheses of functional chromophores highlighting syntheses following either the framework forming scaffold approach by establishing connectivity between chromophores or the chromogenic chromophore approach by de novo formation of chromophore of interest. Both approaches warrant rapid access to molecular functional π-systems, i.e. chromophores, fluorophores, and electrophores for various applications.

Controlling the Fluorescence Performance of AIE Polymers by Controlling the Polymer Microstructure

Aggregation-induced emission (AIE) polymers with expected emission wavelength/color and fluorescence efficiency are valuable in applications. However, most AIE polymers exhibit irregular emission wavelength/color changes compared to the original AIE monomers. Here, we report the synthesis of AIE polymers with unchanged emission wavelength by ring-opening (co)polymerizations of 4-(triphenylethenyl)phenoxymethyloxirane (TPEO) and other epoxides or phthalic anhydride. The chemical structures/physical properties of all (co)polymers were characterized by NMR, SEC, MALDI-TOF, and DSC. The co-polyether microstructures were revealed by calculating the reactivity ratios and visualized by Monte Carlo simulation. The photoluminescence quantum yields of all the (co)polymers were determined in the solid state. We systematically correlated the fluorescence performance with molecular weights, crystallinity, monomer compositions, glass transition temperatures, side lengths, and flexibility/rigidity.

Simultaneous Sensing of Ammonia and Temperatures Using A Dual-mode Freshness Indicator Based on Au/Cu Nanoclusters for Packaged Seafood

Seafood is highly perishable and monitoring its freshness this thus an important issue. For the first time, the current study developed a dual-mode freshness indicator based on d-penicillamine capped bimetallic gold/copper nanoclusters (DPA-Au/CuNCs) as a response probe for simultaneous monitoring of ammonia and temperatures to assess seafood freshness. Results indicated that the prepared DPA-Au/CuNCs have good sensitivity toward ammonia, with a limit of detection of 0.14 ppm. The indicator as a gas sensor for ammonia vapour detection exhibited highly recognizable fluorescence colour changes and the variations from white to yellow were observed with increasing storage temperature under natural light. For confirming its practical applications, the indicator was used to simultaneously monitor ammonia and temperatures during the storage of shrimp and fish, showing good potential for practical applications in evaluating seafood freshness for the food industry.

Multifunctional Fluorescent Main-Chain Charged Polyelectrolytes Synthesized by Cascade C-H Activation/Annulation Polymerizations

Fluorescent polyelectrolytes have attracted enormous attention as functional polymer materials. In contrast with the widely studied conjugated polyelectrolytes with ionic groups in side chains, fluorescent main-chain charged polyelectrolytes (MCCPs) have rarely been explored due to the large synthetic difficulty. Herein, we develop a facile and atom-economical N-heterocyclic carbene-directed cascade C-H activation/annulation polymerization strategy that can transform readily available imidazolium substrates and internal diynes into multifunctional fluorescent MCCPs with complex structures and high molecular weights (absolute Mn up to 135 600) in nearly quantitative yields. The presence of multisubstituted polycyclic N-heteroaromatic cations in polymer backbones endow the obtained MCCPs with excellent solution processability, high thermal stability, and dual-state efficient fluorescence in both solution and aggregate states. Benefiting from the strong electron-withdrawing capability of the cationic heterocycles in main chains, multicolored aggregate-state fluorescence can be readily achieved by modifying the substituents around the cationic ring-fused core. Taking advantage of the good photosensitivity of the fluorescent MCCP thin films, multiscale and high-resolution fluorescent photopatterns with different colors can be facilely prepared with potential applications in optical display devices and anticounterfeiting systems. Moreover, the strong electrostatic interactions of these cationic MCCPs with anionic polyelectrolytes enable them to form multicolored fluorescent interfacial polyelectrolyte complexation microfibers with directly visualized internal structures. Such flexible microfibers can be further made into diversified forms of fiber-based macroscopic patterns or painting.

A Dynamic Supramolecular H-bonding Network with Orthogonally Tunable Clusteroluminescence

Enabling dynamically tunable emissive systems offers opportunities for constructing smart materials. Clusteroluminescence, as unconventional luminescence, has attracted increasing attention in both fundamental and applied sciences. Herein, we report a supramolecular poly(disulfides) network with tunable clusteroluminescence. The reticular H-bonds synergize the rigidity and mobility of dynamic networks, and endow the resulting materials with mechanical adaptivity and robustness, simultaneously enabling efficient clusteroluminescence and phosphorescence at 77 K. Orthogonally tunable luminescence are achieved in two manners, i.e., slow backbone disulfide exchange and fast side-chain metal coordination. Further exploration of the reprocessability and chemical closed-loop recycling of intrinsic dynamic networks for sustainable materials is feasible. We foresee that the synergistic strategy of dynamic chemistry offers a novel pathway and potential opportunities for smart emissive materials.

Pillar[5]arene Derivatives Embedded with Aggregation-Induced Emission Luminogens and Their Fluorescence Regulation

Through McMurry coupling reaction, three meso-position functionalized pillar[5]arene derivatives (H-1, H-2, and H-3) have been successfully prepared by embedding aggregation-induced emission luminogens (AIEgens, diphenyldibenzofulvene (DPDBF) and tetraphenylethylene (TPE)) into the skeleton of supramolecular macrocycles. H-1, bearing [1₅ ]paracyclophane ([1₅ ]PCP) and DPDBF moiety, exhibits yellow emission and demonstrates obvious AIE effect. In order to further improve the host-guest properties of this type of structure, H-2 and H-3 are prepared by replacing the [1₅ ]PCP moiety with pillar[5]arene backbone, both of which show significant AIE effect and excellent host-guest complexation properties with pyrazine salt guest G-1 and 1,4-dicyanobutane G-2. Our findings indicate that G-1 can decrease the fluorescence intensity of the AIE macrocycles, while G-2 can increase their fluorescence intensity in solution.

A Platinum(II)-Based Molecular Cage with Aggregation-Induced Emission for Enzymatic Photocyclization of Alkynylaniline

Enzymes facilitate chemical conversions through the collective activity of aggregated components, but the marriage of aggregation-induced emission (AIE) with molecular containers to emulate enzymatic conversion remains challenging. Herein, we report a new approach to construct a Pt^II -based octahedral cage with AIE characteristics for the photocyclization of alkynylaniline by restricting the rotation of the pendant phenyl rings peripheral to the Pt^II corner. With the presence of water, the C-H⋅⋅⋅π interactions involving the triphenylphosphine fragments resulted in aggregation of the molecular cages into spherical particles and significantly enhanced the Pt^II -based luminescence. The kinetically inert Pt-NP chelator, with highly differentiated redox potentials in the ground and excited states, and the efficient coordination activation of the platinum corner facilitated excellent catalysis of the photocyclization of alkynylaniline. The enzymatic kinetics and the advantages of binding and activating substrates in an aqueous medium provide a new avenue to develop mimics for efficient photosynthesis.