Enzymatic etching of gold nanorods by horseradish peroxidase and application to blood glucose detection

Plasmonic nanoparticle etching-based optical sensors: current status and future prospects

Plasmonic nanoparticles are an emerging tool for developing label-free multicolorimetric sensors for biosensing and chemosensing applications. The color absorbed by nanoparticles from visible light is influenced by their size, shape, orientation, and interparticle distance. Differently sized and shaped gold and silver nanoparticles exhibit a wide range of colors, aiding in the development of label-free sensors. Etching is the process of oxidizing nanoparticles, which alters their aspect ratio, shape, plasmonic peak, and outward appearance. It is typically used to create sensitive sensing platforms. Through etching, analytes could be detected in a simple, sensitive, and selective manner. The multicolor readout of nanoparticle etching-based multicolorimetric sensors can overcome the limitations of conventional colorimetric assays and improve the accuracy of visual inspection. This review discusses different approaches for target sensing using nanoparticle etching strategies like direct etching, enzyme-mediated etching, chemical reaction-driven etching, and anti-etching-based sensors and their mechanisms. In the future, etching strategies could be modified into portable sensing devices to detect a variety of analytes, which will aid in the development of on-time, in situ, and point-of-care sensing systems.

TMB+-mediated etching of urchin-like gold nanostructures for colorimetric sensing

The morphology-dependent localized surface plasmon resonance of gold nanostructures has been widely utilized for designing sensors. One method relies on the color change of gold nanoparticles upon etching. In previous work, TMB2+oxidized from 3,3',5,5'-tetramethylbenzidine (TMB) was found to etch gold nanorods (AuNRs), leading to a spectrum of different colors. However, the preparation of TMB2+needs the addition of a strong acid and other harsh conditions. Herein, a new colorimetric biosensing platform was developed using urchin-like gold nanoparticles (AuNUs). Compared with AuNRs, the etching of AuNUs can happen under mild conditions by TMB+at pH 6, protecting enzymes and proteins from denaturation. The role of CTAB surfactant was dissected, and its bromide ions were found to be involved in the etching process. Based on these observations, a one-step colorimetric detection of H2O2was realized by using horseradish peroxidase and H2O2to oxidize TMB. Within 30 min, this system achieved a detection limit of 80 nM H2O2. This work offered fundamental insights into the etching of anisotropic gold nanostructures and optimized the etching conditions. These advancements hold promise for broader applications in biosensing and analytical chemistry.

Fast and Facile Etching of Gold Nanorods by N-Halosuccinimides: Toward Multicolorimetric Identification and Quantification of 20 Natural Amino Acids

Gold nanorods (AuNRs) have recently become fascinating chromophores in the field of colorimetric sensing because of their eye-catching rainbow colors along with the high dimensionality of their optical profile. The etching of AuNRs using an analyte-sensitive oxidizing agent is particularly an attractive tool not only for adjusting their plasmonic behavior through altering their aspect ratio but also for correlating the observed signal with the identity and concentration of the analyte. However, the deployment of this strategy in the field of sensing has been seriously hindered by various factors ranging from slow etching kinetics and the need for nonambient temperatures to low degrees of controllability along with the high toxicity of the etchants. To resolve these challenges, the present study aims to introduce the outstanding potentials of two inexpensive mild oxidants comprising N-bromosuccinimide (NBS) and N-chlorosuccinimide (NCS) in the highly fast and controllable etching of AuNRs at room temperature. By controlling the concentration of the etchant and the pH of the medium, the longitudinal and transversal peaks could be well adjusted with nanometer precision. In an attempt to elucidate the etching mechanism, the effects of various parameters including the etchant concentration and pH, as well as the kinetics of the etching process were thoroughly investigated. After all, the capability of NBS in decarboxylating the amino acids was further exploited in the design of an all-inclusive multicolorimetric sensor array based on the etching of AuNRs for the sensitive quantification and highly accurate discrimination of all 20 amino acids in the micromolar range. To this end, the acquired data set was analyzed by two machine learning techniques including partial least-squares regression (PLSR) and linear discriminant analysis (LDA). The versatility of N-halosuccinimide reactions with various categories of organic compounds underlies ample opportunities for the design of diverse multicolorimetric sensors, further glamorizing the prospect of this approach.

Plasmonic nanoparticle's anti-aggregation application in sensor development for water and wastewater analysis

Colorimetric sensors have emerged as a powerful tool in the detection of water pollutants. Plasmonic nanoparticles use localized surface plasmon resonance (LSPR)-based colorimetric sensing. LSPR-based sensing can be accomplished through different strategies such as etching, growth, aggregation, and anti-aggregation. Based on these strategies, various sensors have been developed. This review focuses on the newly developed anti-aggregation-based strategy of plasmonic nanoparticles. Sensors based on this strategy have attracted increasing interest because of their exciting properties of high sensitivity, selectivity, and applicability. This review highlights LSPR-based anti-aggregation sensors, their classification, and role of plasmonic nanoparticles in these sensors for the detection of water pollutants. The anti-aggregation based sensing of major water pollutants such as heavy metal ions, anions, and small organic molecules has been summarized herein. This review also provides some personal insights into current challenges associated with anti-aggregation strategy of LSPR-based colorimetric sensors and proposes future research directions.

Plate-Like Colloidal Metal Nanoparticles

The pseudo-two-dimensional (2D) morphology of plate-like metal nanoparticles makes them one of the most anisotropic, mechanistically understood, and tunable structures available. Although well-known for their superior plasmonic properties, recent progress in the 2D growth of various other materials has led to an increasingly diverse family of plate-like metal nanoparticles, giving rise to numerous appealing properties and applications. In this review, we summarize recent progress on the solution-phase growth of colloidal plate-like metal nanoparticles, including plasmonic and other metals, with an emphasis on mechanistic insights for different synthetic strategies, the crystallographic habits of different metals, and the use of nanoplates as scaffolds for the synthesis of other derivative structures. We additionally highlight representative self-assembly techniques and provide a brief overview on the attractive properties and unique versatility benefiting from the 2D morphology. Finally, we share our opinions on the existing challenges and future perspectives for plate-like metal nanomaterials.

Gold nanoparticle formation as an indicator of enzymatic methods: colorimetric l-phenylalanine determination

An enzymatic-colorimetric method has been developed based on the reaction between l-phenylalanine (l-Phe) and the l-amino acid oxidase (LAAO) in the presence of Au(III), which has led to the formation of gold nanoparticles. The intensity of the localized surface plasmon resonance (LSPR) band of the generated nanoparticles (550 nm) can be related to the concentration of l-Phe in the sample. The mechanism of the LAAO-l-Phe enzyme reaction in the presence of Au(III) has been studied through the evaluation and optimization of experimental conditions. These studies have reinforced the hypothesis that the catalytic center of the enzyme helps the Au(III) reduction and, thanks to the protein, the Au⁰ form is stabilized as gold nanoparticles (AuNPs). In the calibration study, a sigmoidal relationship between the concentration of the substrate and the LSPR of the nanoparticles was observed. The linearization of the signal has allowed the determination of l-Phe in the range from 17 to 500 µM with an RSD% (150 μM) of 4.8% (n = 3). The method is free of other amino acid interference normally found in blood plasma. These highly competitive results open the possibility of further development of a rapid method for l-Phe determination based on colorimetry.

Combination of the lateral-flow immunoassay with multicolor gold nanorod etching for the semi-quantitative detection of digoxin

We demonstrated the first ever combination of the lateral-flow immunoassay (LFA) with gold nanorod etching to achieve a multicolor readout where the changes in color hue are more easily discernible than changes in intensity of a single color.

Pseudoequilibrium between Etching and Selective Grain Growth: Chemical Conversion of a Randomly Oriented Au Film into a (111)-Oriented Ultrathin Au Film

Metal thin films with a specific orientation play vital roles in electronics, catalysts, and epitaxial templates. Although oriented metal films have been produced in the recent years, ultrathin oriented metal films (<10 nm) have not been achieved owing to the interfacial instability of the ultrathin films during the thermal annealing process. This study investigates chemical conversion of randomly oriented multigrain Au ultrathin films into (111)-oriented Au ultrathin films. A novel chemical process, termed pseudoequilibrium of etching and selective grain growth, is presented for the chemical conversion by using a quaternary ammonium halide. The reaction variables (reaction time, reaction temperature, species of halide ions) for the chemical conversion process are systematically investigated. This study reveals the in-plane rotational degeneracy in the Au(111) thin film epitaxially grown on a Si(111) substrate. The chemical process can be applied to a broad range of thicknesses from 9 to 100 nm.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Application of Au or Ag nanomaterials for colorimetric detection of glucose

In recent years, Au and Ag nanomaterials have been widely used in the determination of glucose owing to their specific properties such as large specific surface area, high extinction coefficient, strong localized surface plasmon resonance effect and enzyme-mimicking activity. Compared with other methods, colorimetric determination of glucose with Au or Ag nanomaterials features the advantages of simple operation, low cost and easy observation. In this review, several typical synthesis methods of Au and Ag nanomaterials are introduced. Strategies for the colorimetric determination of glucose by Au or Ag nanomaterials are elaborated. The challenges and prospects of the application of Au or Ag nanomaterials for colorimetric detection of glucose are also discussed.

Modulation of Gold Nanorod Growth via the Proteolysis of Dithiol Peptides for Enzymatic Biomarker Detection

Gold nanorods possess optical properties that are tunable and highly sensitive to variations in their aspect ratio (length/width). Therefore, the development of a sensing platform where the gold nanorod morphology (i.e., aspect ratio) is modulated in response to an analyte holds promise in achieving ultralow detection limits. Here, we use a dithiol peptide as an enzyme substrate during nanorod growth. The sensing mechanism is enabled by the substrate design, where the dithiol peptide contains an enzyme cleavage site in-between cysteine amino acids. When cleaved, the peptide dramatically impacts gold nanorod growth and the resulting optical properties. We demonstrate that the optical response can be correlated with enzyme concentration and achieve a 45 pM limit of detection. Furthermore, we extend this sensing platform to colorimetrically detect tumor-associated inhibitors in a biologically relevant medium. Overall, these results present a subnanomolar method to detect proteases that are critical biomarkers found in cancers, infectious diseases, and inflammatory disorders.

Iodide-Mediated Rapid and Sensitive Surface Etching of Gold Nanostars for Biosensing

Iodide-mediated surface etching can tailor the surface plasmon resonance of gold nanostars through etching of the high-energy facets of the nanoparticle protrusions in a rapid and sensitive way. By exploring the underlying mechanisms of this etching and the key parameters influencing it (such as iodide, oxygen, pH, and temperature), we show its potential in a sensitive biosensing system. Horseradish peroxidase-catalyzed oxidation of iodide enables control of the etching of gold nanostars to spherical gold nanoparticles, where the resulting spectral shift in the surface plasmon resonance yields a distinct color change of the solution. We further develop this enzyme-modulated surface etching of gold nanostars into a versatile platform for plasmonic immunoassays, where a high sensitivity is possible by signal amplification via magnetic beads and click chemistry.

Nanosensors for Visual Detection of Glucose in Biofluids: Are We Ready for Instrument-Free Home-Testing?

Making frequent large-scale screenings for several diseases economically affordable would represent a real breakthrough in healthcare. One of the most promising routes to pursue such an objective is developing rapid, non-invasive, and cost-effective home-testing devices. As a first step toward a diagnostic revolution, glycemia self-monitoring represents a solid base to start exploring new diagnostic strategies. Glucose self-monitoring is improving people's life quality in recent years; however, current approaches still present vast room for improvement. In most cases, they still involve invasive sampling processes (i.e., finger-prick), quite discomforting for frequent measurements, or implantable devices which are costly and commonly dedicated to selected chronic patients, thus precluding large-scale monitoring. Thanks to their unique physicochemical properties, nanoparticles hold great promises for the development of rapid colorimetric devices. Here, we overview and analyze the main instrument-free nanosensing strategies reported so far for glucose detection, highlighting their advantages/disadvantages in view of their implementation as cost-effective rapid home-testing devices, including the potential use of alternative non-invasive biofluids as samples sources.

A multi-colorimetric immunosensor for visual detection of ochratoxin A by mimetic enzyme etching of gold nanobipyramids

A multi-colorimetric immunosensor basing on the mimetic enzyme etching of gold nanobipyramids (Au NBPs) was established to detect ochratoxin A (OTA). Octahedral Cu₂O nanoparticles were successfully synthesized through a selective surface stabilization strategy, which can exhibit a peroxidase-like ability to oxidize 3,3',5,5'-tetramethylbenzidine (TMB). Au NBPs can be etched by the product, TMB²⁺, to form a significant longitudinal peak blue shift of local surface plasmon resonance. During the construction of the immunosensor, the microplate was coated with dopamine to immobilized OTA antigens, followed by the immunoreaction of OTA antibody and the Cu₂O-labled secondary antibody. A linear relationship can be found between the local surface plasmon resonance (LSPR) peak changes with the logarithm of OTA concentration in a wide range from 1 ng/L to 5 μg/L, while the detection limit was 0.47 ng/L. Meanwhile, the approximate OTA concentration can be conveniently and intuitively observed by the vivid color changes. Benefiting from the high specificity, the proposed multi-colorimetric immunoassay detection of OTA in millet samples was achieved, indicating the available potential of the immunoassay for the determination of OTA in real samples.

Chemical sensing with Au and Ag nanoparticles

Noble metal nanoparticles (NPs) are ideal scaffolds for the fabrication of sensing devices because of their high surface-to-volume ratio combined with their unique optical and electrical properties which are extremely sensitive to changes in the environment. Such characteristics guarantee high sensitivity in sensing processes. Metal NPs can be decorated with ad hoc molecular building blocks which can act as receptors of specific analytes. By pursuing this strategy, and by taking full advantage of the specificity of supramolecular recognition events, highly selective sensing devices can be fabricated. Besides, noble metal NPs can also be a pivotal element for the fabrication of chemical nose/tongue sensors to target complex mixtures of analytes. This review highlights the most enlightening strategies developed during the last decade, towards the fabrication of chemical sensors with either optical or electrical readout combining high sensitivity and selectivity, along with fast response and full reversibility, with special attention to approaches that enable efficient environmental and health monitoring.

Pd nanoparticles as a plasmonic material: synthesis, optical properties and applications

This review provides an overview of current progress in Pd nanoparticles supporting localized surface plasmon resonance and their applications. We begin by analyzing briefly the optical properties of Pd putting particular focus on outlining the origin of its size- and shape-dependent LSPR, high refractive index sensitivity, and high absorption contribution. The differences in the optical behavior with Au and Ag, the primary plasmonic materials, are highlighted. The main strategies to synthesize Pd nanoparticles, pure or hybrid, with well-defined optical properties are then reviewed. In this section, we include only those works that carry out the study of the optical properties of the nanoparticles. The applications of plasmonic Pd nanoparticles are also discussed in detail. This review is concluded with a section devoted to the future perspectives highlighting the most relevant challenges to be addressed to take Pd nanoparticles from the laboratory to real applications.

Selective shortening of gold nanorods: when surface functionalization dictates the reactivity of nanostructures

The selective shortening of gold nanorods (NRs) is a directional etching process that has been intensively studied by UV-Vis spectroscopy because of its direct impact on the optical response of these plasmonic nanostructures. Here, liquid-cell transmission electron microscopy is exploited to visualize this peculiar corrosion process at the nanoscale and study the impacts of reaction kinetics on the etching mechanisms. In situ imaging reveals that anisotropic etching requires a chemical environment with a low etching power to make the tips of NRs the only reaction site for the oxidation process. Then, aberration-corrected TEM and atomistic simulations were combined to demonstrate that the disparity between the reactivity of the body and the ends of NRs does not derive from their crystal structure but results from an inhomogeneous surface functionalization. In a general manner, this work highlights the necessity to consider the organic/inorganic natures of nanostructures to understand their chemical reactivity.

Ultrasensitive Visual Detection of Glucose in Urine Based on the Iodide-Promoted Etching of Gold Bipyramids

Blood glucose monitoring is an essential but painful component of diabetes management, so it is urgent to develop simple, convenient, and noninvasive glucose monitoring methods as alternatives. Because the glucose level in urine is directly related to the blood glucose, urine can be an alternative for blood glucose monitoring. Herein, we report the development of a new and highly sensitive noninvasive colorimetric assay to detect the glucose content in urine samples using gold bipyramids (GBPs). The principle of this method is to utilize hydrogen peroxide (H₂O₂), the oxidation product of glucose, to etch GBPs, where the urine glucose will be quantified based on the displacement of the absorption peak of GBPs. The unique morphology (sharp tips) and etching mechanism (from tips) of GBPs determine the high sensitivity of this assay. Under optimal conditions, this colorimetric assay shows a dynamic range of 0.5-250 μM and a detection limit of 0.34 μM for artificial urine samples. This detection capability is ideal when sample dilution is necessary. Another advantage is that the color change of the GBP solution in this assay is convenient for the visual readout of the urine glucose semiquantitatively by the naked eye. Furthermore, it has been demonstrated here that the iodide ion has the horseradish peroxidase (HRP) activity and can be used alone to promote the reduction reaction of H₂O₂, which eliminates the use of HRP enzymes, simplifies the reaction, and reduces costs. The role of iodide ions has been studied and mainly attributed as a catalyst with I₂ as the reaction intermediate, which reduced the activation energy for the reduction of H₂O₂.

Enzyme-like electrocatalysis from 2D gold nanograss-nanocube assemblies

Nanotechnology's rapid development of nanostructured materials with disruptive material properties has inspired research for their use as electrocatalysts to potentially substitute enzymes. Herein, a novel electrocatalytic nanomaterial was constructed by growing gold nanograss (AuNG) on 2D nanoassemblies of gold nanocubes (AuNC). The resulting structure (NG@NC) was used for the detection of H₂O₂via its electrochemical reduction. The NG@NC electrode displayed a large active surface area, resulting in improved electron transfer efficiency. On the nanoscale, AuNG maintained its structure, providing high stability and reproducibility of the sensing platform. Our nanostructured electrode showed excellent catalytic activity towards H₂O₂ at an applied potential of -0.5 V vs Ag/AgCl. This facilitated H₂O₂ detection with excellent selectivity in an environment like human urine, and a linear response from 50 µM to 30 mM, with a sensitivity of 100.66 ± 4.0 μA mM^-1 cm^-2. The NG@NC-based sensor hence shows great potential in nonenzymatic electrochemical sensing.

A colorimetric immunosensor for determination of foodborne bacteria using rotating immunomagnetic separation, gold nanorod indication, and click chemistry amplification

A colorimetric immunosensor was developed for the determination of Salmonella Typhimurium using rotating magnetic separation, gold nanorod (GNR) indication, and click chemistry amplification. The target bacteria were first separated from large-volume sample using a rotating magnetic field and a small amount (50 μg) of immunomagnetic nanoparticles (MNPs), resulting in the forming of magnetic bacteria. Then, the magnetic bacteria were conjugated with catalase (CAT)-labeled antibodies, which were synthesized using trans-cyclooctene/1,2,4,5-tetrazine click chemistry reaction, resulting in the forming of enzymatic bacteria. Then the CATs on the enzymatic bacteria were used to decompose an excessive amount of hydrogen peroxide (H₂O₂), the remaining H₂O₂ was mixed with horseradish peroxidase to etch the GNRs, resulting in color change and absorbance peak shift of the GNRs. Finally, the peak shift was measured and analyzed for the quantitative determination of target bacteria. This immunosensor was able to detect Salmonella Typhimurium with a linear range of 10¹-10⁵ CFU mL^-1 in 3 h with a low detection limit of 35 CFU mL^-1. The mean recovery for Salmonella Typhimurium in spiked chicken samples was 109%. Graphical abstractSchematic representation of a colorimetric immunosensor for the determination of Salmonella Typhimurium as low as 35 CFU mL^-1 using rotating magnetic separation of Salmonella from a large-volume sample, click chemistry reaction of catalase with antibodies for signal amplification, and HRP-mediated gold nanorod etching for result indication.

Biomineralization synthesis of a near-infrared fluorescent nanoprobe for direct glucose sensing in whole blood

A near-infrared (NIR) fluorescent nanoprobe that enables to circumvent the interference of background absorption and fluorescence in whole blood was developed for the direct sensing of blood glucose. Here, NIR fluorescent protein (iRFP) and glucose oxidase (GOx) were collectively deployed as the templates for the biomineralization of Mn2+ to prepare a NIR fluorescent nanoprobe (iRFP-GOx-MnO2 nanoparticles, iRGMs), in which the fluorescence of iRFP was effectively quenched by MnO2via energy transfer. When the iRGMs were mixed with whole blood samples, GOx can convert blood glucose into gluconic acid, as well as H2O2, which will reduce MnO2 and decompose the iRGMs. As a result, the NIR fluorescence of iRFPs was restored, providing a fluorometric assay for the direct detection of blood glucose. Owing to the high efficiency of the cascade reaction and the low background interference of the NIR fluorescence signal, accurate and rapid analysis of the glucose levels in whole blood samples was achieved using the iRGMs. Moreover, an iRGM-based paper device that only requires 5 microliters of samples was also demonstrated in the direct assay of blood glucose without any pretreatment, affording an alternative approach for the accurate monitoring of blood glucose levels.

Precisely tuning the longitudinal localized surface plasmon resonance of gold nanorods via additive-regulated overgrowth

An additive-regulated overgrowth strategy for preparing gold nanorods with precise longitudinal localized surface plasmon resonance is proposed.

Colorimetric adenosine assay based on the self-assembly of aptamer-functionalized gold nanorods

A colorimetric method is presented for ultrasensitive determination of adenosine. The assay is based on side-by-side self-assembly of aptamer-functionalized gold nanorods (Au NRs). It relies on the fact that the conjugation of the helper DNA predominantly occurs at the terminal ends of the Au NRs rather than at their sides. The adenosine aptamers consist of two pieces of ssDNA (termed C1 and C2) that were individually attached to the sides of Au NRs. In the presence of adenosine, it will be captured by C1 and C2 to form a stable sandwich structure. As a result, a side-to-side assembly of the Au NRs occurs. If the adenosine concentration is increased, the absorbance of the Au NRs at 742 nm gradually decreases, and the color changes from brick red to dark brown. Response is linear range in the 10 pM to 5 nM adenosine concentration range, and the detection limit is as low as 3.3 pM. Adenosine analogues such as uridine and cytidine do not interfere. The method was used to quantify adenosine in serum samples at concentrations as low as 10 pM. Graphical abstractSchematic representation of an effective colorimetric method for adenosine detection based on target adenosine-induced side-by-side self-assembly of gold nanorods (Au NRs).

Gold Nanoparticle-Based Colorimetric Strategies for Chemical and Biological Sensing Applications

Gold nanoparticles are popularly used in biological and chemical sensors and their applications owing to their fascinating chemical, optical, and catalytic properties. Particularly, the use of gold nanoparticles is widespread in colorimetric assays because of their simple, cost-effective fabrication, and ease of use. More importantly, the gold nanoparticle sensor response is a visual change in color, which allows easy interpretation of results. Therefore, many studies of gold nanoparticle-based colorimetric methods have been reported, and some review articles published over the past years. Most reviews focus exclusively on a single gold nanoparticle-based colorimetric technique for one analyte of interest. In this review, we focus on the current developments in different colorimetric assay designs for the sensing of various chemical and biological samples. We summarize and classify the sensing strategies and mechanism analyses of gold nanoparticle-based detection. Additionally, typical examples of recently developed gold nanoparticle-based colorimetric methods and their applications in the detection of various analytes are presented and discussed comprehensively.

Label-free gold nanorods sensor array for colorimetric detection and discrimination of biothiols in human urine samples

Biothiols play important roles in regulating redox balance in biological systems, but their discrimination is challengeable. In this work, a colorimetric nanosensing array for biothiols was established, which was composed of gold nanorods (AuNRs) and metal ions (Hg²⁺, Pb²⁺, Cu²⁺, Ag⁺). By employing label-free AuNRs as the colorimetric probe, and the color and spectral changes of AuNRs as the output signal, principal component analysis (PCA) was applied to processing the signal and generating a clustering map. Due to the different binding affinity between biothiols and metal ions, AuNRs exhibited a unique pattern to form a fingerprint-like colorimetric array, which was able to discriminate five biothiols by the naked eyes. This strategy combines PCA and sensor array to achieve rapid and accurate discrimination and detection of biothiols. In addition, the method shows the great potential in analysis of biothiols in human urine samples.

Ferrocene-Modified Polyelectrolyte Film-Coated Electrode and Its Application in Glucose Detection

A polyelectrolyte film-coated electrode for the quantitative detection of glucose was reported. Carbon nanotubes, graphene oxide and polyelectrolyte with a ferrocenyl group were used to modify an enzyme electrode to facilitate the electron transfer between glucose oxidase and the electrode. Cyclic voltammetry and amperometric methods were adopted to investigate the effects of different polyelectrolytes and carbon nanomaterials on the electrochemical properties of enzyme electrodes. The results indicate that the ferrocenyl groups on a polyelectrolyte skeleton act as a mediator between the redox center of glucose oxidase and the electrode, which efficiently enhances the electron transfer between a glassy carbon electrode and glucose oxidase. The calibration curve of the sensor shows a linear range from 0.2 to 5 mM for glucose response. The sensor can achieve 95% of the steady-state current within 10 s. The electrodes also present high operational stability and long-term storage stability.

Interfacial engineering of carbon dots with benzenediboronic acid for fluorescent biosensing

Glucose assay is highly important in clinical diagnostics of diabetes. Herein, we engineered the surface of carbon dots by complexation with functional ligand and constructed fluorescent biosensors for the detection of hydrogen peroxide and glucose. In this study, benzenediboronic acid is conjugated to the surface of citric acid-derived carbon dots through formation of boronate complexes with the nanoparticles. The oxidation of benzenediboronic acid with hydrogen peroxide effectively quenches fluorescence of carbon dots through electron transfer process. The sensing performance of the system according to different engineered surfaces of carbon dots was studied by using carbon dots derived from various precursors and different benzenediboronic acid analogues. As a simple mix-and-detect strategy, this system is facilely applied for glucose sensing as hydrogen peroxide is the product catalyzed by glucose oxidase. The benzenediboronic acid-conjugated carbon dots derived from citric acid act as excellent optical probes for sensitive analysis of glucose with detection limit of 0.4 μM. This sensing system shows great selectivity toward interferent species such as analogues of glucose, and can be used to determine glucose in human serum. Engineering the surface of carbon dots by complexation with ligand of interest provides a feasible way to facilitate the development of biological applications.

Time-resolved visual detection of heparin by accelerated etching of gold nanorods

Plasmonic gold nanorods are promising and sensitive light scattering probes, which can reach the single particle level. Herein, we present the light scattering properties of gold nanorods for time-resolved visual detection of heparin based on the rapid etching of gold nanorods under dark-field microscopy.

Gold nanoparticle etching induced by an enzymatic-like reaction for the colorimetric detection of hydrogen peroxide and glucose

A rapid colorimetric method for the sensitive and selective detection of H₂O₂ and glucose was developed based on the etching of AuNPs.

DNA flower-encapsulated horseradish peroxidase with enhanced biocatalytic activity synthesized by an isothermal one-pot method based on rolling circle amplification

DNA nanotechnology has been developed to construct a variety of functional two- and three-dimensional structures for versatile applications. Rolling circle amplification (RCA) has become prominent in the assembly of DNA-inorganic composites with hierarchical structures and attractive properties. Here, we demonstrate a one-pot method to directly encapsulate horseradish peroxidase (HRP) in DNA flowers (DFs) during RCA. The growing DNA strands and Mg₂PPi crystals lead to the construction of porous DFs, which provide sufficient interaction sites for spontaneously incorporating HRP molecules into DFs with high loading capacity and good stability. Furthermore, in comparison with free HRP, the DNA flower-encapsulated HRP (termed HRP-DFs) demonstrate enhanced enzymatic activity, which can efficiently biocatalyze the H₂O₂-mediated etching of gold nanorods (AuNRs) to generate distinct color changes since the longitudinal localized surface plasmon resonance (LSPR) frequency of AuNRs is highly sensitive to the changes in the AuNR aspect ratio. Through rationally incorporating the complementary thrombin aptamer sequence into the circular template, the synthesized HRP-DF composites are readily used as amplified labels for visual and colorimetric detection of thrombin with ultrahigh sensitivity and excellent selectivity. Therefore, our proposed strategy for direct encapsulation of enzyme molecules into DNA structures shows considerable potential applications in biosensing, biocatalysis, and point-of-care diagnostics.

The Many "Facets" of Halide Ions in the Chemistry of Colloidal Inorganic Nanocrystals

Over the years, scientists have identified various synthetic "handles" while developing wet chemical protocols for achieving a high level of shape and compositional complexity in colloidal nanomaterials. Halide ions have emerged as one such handle which serve as important surface active species that regulate nanocrystal (NC) growth and concomitant physicochemical properties. Halide ions affect the NC growth kinetics through several means, including selective binding on crystal facets, complexation with the precursors, and oxidative etching. On the other hand, their presence on the surfaces of semiconducting NCs stimulates interesting changes in the intrinsic electronic structure and interparticle communication in the NC solids eventually assembled from them. Then again, halide ions also induce optoelectronic tunability in NCs where they form part of the core, through sheer composition variation. In this review, we describe these roles of halide ions in the growth of nanostructures and the physical changes introduced by them and thereafter demonstrate the commonality of these effects across different classes of nanomaterials.

Colorimetric and visual detection of mercury(II) based on the suppression of the interaction of dithiothreitol with agar-stabilized silver-coated gold nanoparticles

A colorimetric and visual method is described for the determination of mercury(II) ion. A gel consisting of agar-stabilized silver-coated gold nanoparticles (Au@Ag NPs) was prepared. The reaction with dithiothreitol (DTT) via thiol-Ag chemistry results in an orange to purple color change of the gel. However, in the presence of Hg(II), the reaction of DTT with the silver shells is suppressed due to the strong thiophilicity of Hg(II). The color of the gel changes from purple to red to orange in the presence of increasing concentrations of Hg(II). The Au@Ag NPs therefore are a viable optical probe for Hg(II) which can be detected in concentration as low as 78 nM via dual-wavelength ratiometric absorbance (A₃₉₀/A₅₂₀), and at 1 μM levels with bare eyes. The use of agar as a support is mandatory to prevent the aggregation of the NPs and also improves selectivity. The method was applied to the analysis of spiked samples, and recoveries ranged between 96.3 and 104%. The assay is easy, inexpensive, and in our perception represents an attractive tool for on-site visual detection of Hg(II). Graphical abstract Schematic of the assay. With increasing concentrations of Hg(II), the oxidative etching of silver shells caused by dithiothreitol (DTT) is gradually inhibited, and the color of agar-stabilized Au@Ag NP gel varies from purple to red, and finally to orange. This can be used for visual detection of Hg(II).

Biosensing strategies based on enzymatic reactions and nanoparticles

Application of new nanomaterials to detection of enzymatic activities allows the development of new sensitive and selective bioanalytical assays based on enzymes for recognition and signal amplification.

Colorimetric determination of ferrous ion via morphology transition of gold nanorods

A colorimetric method is described for the determination of ferrous ion (Fe²⁺) with high sensitivity and selectivity. The method is based on catalytic etching of gold nanorod (NR). In an acid condition, Fe²⁺ reacts with H₂O₂ to produce superoxide radical (O₂^•-) that etches gold NRs from the low energy surface along the longitudinal direction preferentially. As a result, the changes in the absorption spectrum and color of gold NR can be measured and also can be detected visually. Under the optimal conditions, the assay has very low detection limit (13.5 nM) and a linear response in a concentration range of 75 to 1 μM. The method was applied to the determination of Fe²⁺ in spiked samples of fetal bovine serum and also transferred to a kind of test stripe for use in fast practical applications. A unique colorimetric sensing method is demonstrated for the colorimetric detection of Fe²⁺, again based on the oxidation of gold nanorods which leads to the blue-shift of the absorption. Graphical abstract A unique colorimetric sensing method was shown for the colorimetric detection of Fe²⁺. Fe²⁺reacts with H₂O₂ to generate superoxide radical that oxidize gold nanorods. This leads to a color change from blue-green to pink.