Advances in Hierarchical Inorganic Nanostructures for Efficient Solar Energy Harvesting Systems

The urgent need to address the global energy and environmental crisis necessitates the development of efficient solar-power harvesting systems. Among the promising candidates, hierarchical inorganic nanostructures stand out due to their exceptional attributes, including a high specific surface area, abundant active sites, and tunable optoelectronic properties. In this comprehensive review, we delve into the fundamental principles underlying various solar energy harvesting technologies, including dye-sensitized solar cells (DSSCs), photocatalytic, photoelectrocatalytic (water splitting), and photothermal (water purification) systems, providing a foundational understanding of their operation. Thereafter, the discussion is focused on recent advancements in the synthesis, design, and development of hierarchical nanostructures composed of diverse inorganic material combinations, tailored for each of these solar energy harvesting systems. We meticulously elaborate on the distinct synthesis methods and conditions employed to fine-tune the morphological features of these hierarchical nanostructures. Furthermore, this review offers profound insights into critical aspects such as electron transfer mechanisms, band gap engineering, the creation of hetero-hybrid structures to optimize interface chemistry through diverse synthesis approaches, and precise adjustments of structural features. Beyond elucidating the scientific fundamentals, this review explores the large-scale applications of the aforementioned solar harvesting systems. Additionally, it addresses the existing challenges and outlines the prospects for achieving heightened solar-energy conversion efficiency.

Enhanced optical and electrochemical properties of FeBTC MOF modified TiO2 photoanode for DSSCs application

In this work, iron based 1, 3, 5-tricarboxylic acid (FeBTC) was prepared via microwave-assisted method and incorporated into TiO2 via ultrasonic assisted method. The TiO2-FeBTC nanocomposites were characterized by XRD, FTIR, Raman, BET, FESEM, HRTEM, TGA, UV‒vis DRS and PL to understand their crystallographic, surface morphology, and optical characteristics. The Raman spectra showed a blue shift of Eg, A1g, and B1g peaks upon incorporation of FeBTC MOF onto TiO2. HRTEM and XRD analysis confirmed a mixture of TiO2 nanospheres and hexagonal FeBTC MOF morphologies with high crystallinity. The incorporation of FeBTC onto TiO2 improved the surface area as confirmed by BET results, which resulted in improved absorption in the visible region as a results of reduced bandgap energy from 3.2 to 2.84 eV. The PL results showed a reduced intensity for TiO2-FeBTC (6%) sample, indicating improved separation of electron hole pairs and reduced recombination rate. After fabrication of the TiO2-FeBTC MOF photoanode, the charge transfer kinetics were enhanced at TiO2-FeBTC MOF (6%) with Rp value of 966 Ω, as given by EIS studies. This led to high performance due to low charge resistance. Hence, high power conversion efficiency (PCE) value of 0.538% for TiO2-FeBTC (6%) was achieved, in comparison with other loadings. This was attributed to a relatively high surface area which allowed more charge shuttling and thus better electrical response. Conversely, upon increasing the FeBTC MOF loading to 8%, significant reduction in efficiency (0.478%) was obtained, which was attributed to sluggish charge transfer and fast electron-hole pair recombination rate. The TiO2-FeBTC (6%) may be a good candidate for use in DSSCs as a photoanode materials for improved efficiency.

Computational Discovery of Intermolecular Singlet Fission Materials Using Many-Body Perturbation Theory

Intermolecular singlet fission (SF) is the conversion of a photogenerated singlet exciton into two triplet excitons residing on different molecules. SF has the potential to enhance the conversion efficiency of solar cells by harvesting two charge carriers from one high-energy photon, whose surplus energy would otherwise be lost to heat. The development of commercial SF-augmented modules is hindered by the limited selection of molecular crystals that exhibit intermolecular SF in the solid state. Computational exploration may accelerate the discovery of new SF materials. The GW approximation and Bethe-Salpeter equation (GW+BSE) within the framework of many-body perturbation theory is the current state-of-the-art method for calculating the excited-state properties of molecular crystals with periodic boundary conditions. In this Review, we discuss the usage of GW+BSE to assess candidate SF materials as well as its combination with low-cost physical or machine learned models in materials discovery workflows. We demonstrate three successful strategies for the discovery of new SF materials: (i) functionalization of known materials to tune their properties, (ii) finding potential polymorphs with improved crystal packing, and (iii) exploring new classes of materials. In addition, three new candidate SF materials are proposed here, which have not been published previously.

Advancements and Prospects in Perovskite Solar Cells: From Hybrid to All-Inorganic Materials

Hybrid perovskites, materials composed of metals and organic substances in their structure, have emerged as potential materials for the new generation of photovoltaic cells due to a unique combination of optical, excitonic and electrical properties. Inspired by sensitization techniques on TiO2 substrates (DSSC), CH3NH3PbBr3 and CH3NH3PbI3 perovskites were studied as a light-absorbing layer as well as an electron-hole pair generator. Photovoltaic cells based on per-ovskites have electron and hole transport layers (ETL and HTL, respectively), separated by an ac-tive layer composed of perovskite itself. Major advances subsequently came in the preparation methods of these devices and the development of different architectures, which resulted in an efficiency exceeding 23% in less than 10 years. Problems with stability are the main barrier to the large-scale production of hybrid perovskites. Partially or fully inorganic perovskites appear promising to circumvent the instability problem, among which the black perovskite phase CsPbI3 (α-CsPbI3) can be highlighted. In more advanced studies, a partial or total substitution of Pb by Ge, Sn, Sb, Bi, Cu or Ti is proposed to mitigate potential toxicity problems and maintain device efficiency.

A Comprehensive Review on Perovskite Solar Cells Integrated Photo-supercapacitors and Perovskites-Based Electrochemical Supercapacitors

Perovskite solar cells (PSCs) have rapidly become a prevalent photovoltaic technology owing to their simple structure, low processing cost, and remarkable increase in solar-to-electric power conversion efficiency (PCE). However, the intermittent nature of solar radiation induces some technical and financial challenges for its practical applications as a reliable power source. To address this issue, the integration of PSCs with supercapacitors (SCs) in the form of integrated photo-supercapacitors (IPSs) has gathered significant attention. This integration can balance energy availability and demand, reduce energy wastage, and stabilize power output for portable and wearable electronics. Meanwhile, the excellent optoelectronic properties with mixed electronic and ionic conductivity of metal halide perovskites (MHPs) have expanded their application as electrode and electrolyte materials for SCs and photo-supercapacitors (PSs) applications. This review provides an all-inclusive summary of the current state-of-the-art research progress of PSCs-IPSs and MHPs-based SCs and PSs by highlighting their basics and integration approaches. It also discusses the challenges and prospects of these materials and technologies.

Designing of fluorine-substituted benzodithiophene-based small molecules with efficient photovoltaic parameters

In this study, four hole-transporting materials (JY-M1, JY-M2, JY-M3, and JY-M4) are designed by modifying benzothiadiazole-based core with diphenylamine-based carbazole via acceptors through thiophene linkers. The designed molecules exhibited deeper HOMO energy with smaller energy gaps than the reference JY molecule which enhance their hole mobility. The absorption spectra of the JY-M1, JY-M2, JY-M3, and JY-M4 molecules are located at 380 nm to 407 nm in the gaseous phase and 397 nm to 433 nm in the solvent phase, which is red-shifted and higher than the reference molecule, demonstrating that designed molecules possess improved light absorption properties and enhanced effective hole transfer. The dipole moments of the designed molecules (14.74 D to 26.12 D) indicate a greater ability for charge separation, solubility and will be beneficial to produce multilayer films. Moreover, the results of hole reorganization energy (0.38198 eV to 0.45304 eV) and charge transfer integral (0.14315 eV to 0.14665 eV) of designing molecules show improved hole mobility and lower recombination losses compared to the JY molecule. Overall, we suggested that the structural modifications in the designed molecules contributed to their enhanced efficiency in converting light energy into electrical energy and have the potential for utilization in solar devices, paving the way for future advancements in the field of photovoltaics.

A comprehensive review of the current progresses and material advances in perovskite solar cells

Recently, perovskite solar cells (PSCs) have attracted ample consideration from the photovoltaic community owing to their continually-increasing power conversion efficiency (PCE), viable solution-processed methods, and inexpensive materials ingredients. Over the past few years, the performance of perovskite-based devices has exceeded 25% due to superior perovskite films achieved using low-temperature synthesis procedures along with evolving appropriate interface and electrode-materials. The current review provides comprehensive knowledge to enhance the performance and materials advances for perovskite solar cells. The latest progress in terms of perovskite crystal structure, device construction, fabrication procedures, and challenges are thoroughly discussed. Also discussed are the different layers such as ETLs and buffer-layers employed in perovskite solar-cells, seeing their transmittance, carrier mobility, and band gap potentials in commercialization. Generally, this review delivers a critical assessment of the improvements, prospects, and trials of PSCs.

Palladium-Catalyzed Direct (Het)arylation Reactions of Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole and 4,8-Dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole)

Palladium-catalyzed direct (het)arylation reactions of strongly electron-withdrawing tricyclic benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) and its 4,8-dibromo derivative were studied; the conditions for the selective formation of mono- and bis-aryl derivatives were found. The reaction of 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) with thiophenes in the presence of palladium acetate as a catalyst and potassium pivalate as a base, depending on the conditions used, selectively gave both mono- and bis-thienylated benzo-bis-thiadiazoles in low to moderate yields; arenes were found to be inactive in these reactions. It was discovered that direct C-H arylation of benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole with bromo(iodo)arenes and -thiophenes in the presence of Pd(OAc)2 and di-tert-butyl(methyl)phosphonium tetrafluoroborate salt is a powerful tool for the selective formation of 4-mono- and 4,8-di(het)arylated benzo-bis-thiadiazoles. Oxidative double C-H hetarylation of benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole with thiophenes in the presence of Pd(OAc)₂ and silver (I) oxide in DMSO was successfully employed to prepare bis-thienylbenzo-bis-thiadiazoles in moderate yields.

Role of a corrugated Dion-Jacobson 2D perovskite as an additive in 3D MAPbBr3 perovskite-based light emitting diodes

Metal halide perovskites represent an intriguing class of materials, and a very promising approach to tune the properties of optoelectronic devices and improve their performance involves the implementation of architectures based on mixed 3D and 2D perovskites. In this work, we investigated the use of a corrugated 2D Dion-Jacobson perovskite as an additive to a classical 3D MAPbBr3 perovskite for applications in light-emitting diodes. Taking advantage of the properties of this emerging class of materials, we studied the effect of a 2D 2-(dimethylamino)ethylamine (DMEN)-based perovskite on the morphological, photophysical, and optoelectronic properties of 3D perovskite thin films. We used α-DMEN perovskite both in a mixture with MAPbBr3 creating mixed 2D/3D phases and as a passivating thin layer deposited on the top of a 3D perovskite polycrystalline film. We observed a beneficial modulation of the thin film surface, a blue shift in the emission spectrum, and enhanced device performance.

Green Energy by Hydrogen Production from Water Splitting, Water Oxidation Catalysis and Acceptorless Dehydrogenative Coupling

In this review, we want to explain how the burning of fossil fuels is pushing us towards green energy. Actually, for a long time, we have believed that everything is profitable, that resources are unlimited and there are no consequences. However, the reality is often disappointing. The use of non-renewable resources, the excessive waste production and the abandonment of the task of recycling has created a fragile thread that, once broken, may never restore itself. Metaphors aside, we are talking about our planet, the Earth, and its unique ability to host life, including ourselves. Our world has its balance; when the wind erodes a mountain, a beach appears, or when a fire devastates an area, eventually new life emerges from the ashes. However, humans have been distorting this balance for decades. Our evolving way of living has increased the number of resources that each person consumes, whether food, shelter, or energy; we have overworked everything to exhaustion. Scientists worldwide have already said actively and passively that we are facing one of the biggest problems ever: climate change. This is unsustainable and we must try to revert it, or, if we are too late, slow it down as much as possible. To make this happen, there are many possible methods. In this review, we investigate catalysts for using water as an energy source, or, instead of water, alcohols. On the other hand, the recycling of gases such as CO2 and N2O is also addressed, but we also observe non-catalytic means of generating energy through solar cell production.

Recent Criterion on Stability Enhancement of Perovskite Solar Cells

Perovskite solar cells (PSCs) have captured the attention of the global energy research community in recent years by showing an exponential augmentation in their performance and stability. The supremacy of the light-harvesting efficiency and wider band gap of perovskite sensitizers have led to these devices being compared with the most outstanding rival silicon-based solar cells. Nevertheless, there are some issues such as their poor lifetime stability, considerable J–V hysteresis, and the toxicity of the conventional constituent materials which restrict their prevalence in the marketplace. The poor stability of PSCs with regard to humidity, UV radiation, oxygen and heat especially limits their industrial application. This review focuses on the in-depth studies of different direct and indirect parameters of PSC device instability. The mechanism for device degradation for several parameters and the complementary materials showing promising results are systematically analyzed. The main objective of this work is to review the effectual strategies of enhancing the stability of PSCs. Several important factors such as material engineering, novel device structure design, hole-transporting materials (HTMs), electron-transporting materials (ETMs), electrode materials preparation, and encapsulation methods that need to be taken care of in order to improve the stability of PSCs are discussed extensively. Conclusively, this review discusses some opportunities for the commercialization of PSCs with high efficiency and stability.

The evolution of triphenylamine hole transport materials for efficient perovskite solar cells

In recent years, the dramatic increase in power conversion efficiency (PCE) coupled with a decrease in the total cost of third-generation solar cells has led to a significant increase in the collaborative research efforts of academic and industrial researchers. Such interdisciplinary studies have afforded novel materials, which in many cases are now ready to be brought to the marketplace. Within this framework, the field of perovskite solar cells (PSCs) is currently an important area of research due to their extraordinary light-harvesting properties. In particular, PSCs prepared via facile synthetic procedures, containing hole transport materials (HTMs) with versatile triphenylamine (TPA) structural cores, amenable to functionalization, have become a focus of intense global research activity. To optimize the efficiency of the solar cells to achieve efficiencies closer to rival silicon-based technology, TPA building blocks must exhibit favourable electrochemical, photophysical, and photochemical properties that can be chemically tuned in a rational manner. Although PSCs based on TPA building blocks exhibit attractive properties such as high-power efficiencies, a reduction in their synthetic costs coupled with higher stabilities and environmental considerations still need to be addressed. Considering the above, a detailed summary of the most promising compounds and current methodologies employed to overcome the remaining challenges in this field is provided. The objective of this review is to provide guidance to readers on exploring new avenues for the discovery of efficient TPA derivatives, to aid in the future development and advancement of TPA-based PSCs for commercial applications.

Fabrication of Flexible Quasi-Interdigitated Back-Contact Perovskite Solar Cells

Perovskites are a promising class of semiconductor materials, which are being studied intensively for their applications in emerging new flexible optoelectronic devices. In this paper, device manufacturing and characterization of quasi-interdigitated back-contact perovskite solar cells fabricated on flexible substrates are studied. The photovoltaic parameters of the prepared flexible quasi-interdigitated back-contact perovskite solar cells (FQIBC PSCs) are obtained for the front- and rear-side illumination options. The dependences of the device’s open-circuit potential and short-circuit current on the illumination intensity are investigated to determine the main recombination pathways in the devices. Spectral response analysis of the devices demonstrates that the optical transmission losses can be minimized when FQIBC PSCs are illuminated from the front-side. Optoelectronic simulations are used to rationalize the experimental results. It is determined that the obtained FQIBC PSCs have high surface recombination losses, which hinder the device performance. The findings demonstrate a process for the fabrication of flexible back-contact PSCs and provide some directions for device performance improvements.

Dimensional Optimization of TiO2 Nanodisk Photonic Crystals on Lead Iodide (MAPbI3) Perovskite Solar Cells by Using FDTD Simulations

Perovskite solar cells (PSC) are currently exhibiting reproducible high efficiency, low-cost manufacturing, and scalable electron transport layers (ETL), which are becoming increasingly important. The application of photonic crystals (PC) on solar cells has been proven to enhance light harvesting and lead solar cells to adjust the propagation and distribution of photons. In this paper, the optimization of a two-dimensional nanodisk PC introduced in ETL with an organic-inorganic lead-iodide perovskite (methylammonium lead-iodide, MAPbI3) as the absorber layer was studied. A finite-difference time-domain (FDTD) simulation was used to evaluate the optical performance of PSC with various lattice constants and a radius of nanodisk photonic crystals. According to the simulation, the optimum lattice constant and PC radius applied to ETL are 500 nm and 225 nm, respectively. This optimum design enhances PSC absorption performance by more than 94% of incident light.

On the Shape-Selected, Ligand-Free Preparation of Hybrid Perovskite (CH3NH3PbBr3) Microcrystals and Their Suitability as Model-System for Single-Crystal Studies of Optoelectronic Properties

Hybrid perovskite materials are one of the most promising candidates for optoelectronic applications, e.g., solar cells and LEDs, which can be produced at low cost compared to established materials. Although this field of research has seen a huge upsurge in the past decade, there is a major lack in understanding the underlying processes, such as shape-property relationships and the role of defects. Our aerosol-assisted synthesis pathway offers the possibility to obtain methylammonium lead bromide (MAPbBr₃) microcrystals from a liquid single source precursor. The differently shaped particles are aligned on several substrates, without using a directing agent or other additives. The obtained particles show good stability under dry conditions. This allows us to characterize these materials and their pure surfaces at the single-crystal level using time- and spatially resolved methods, without any influences of size-dependent effects. By optimizing the precursor for the aerosol process, we were able to eliminate any purification steps and use the materials as processed. In addition, we performed theoretical simulations to deepen the understanding of the underlying processes in the formation of the different crystal facets and their specific properties. The model system presented provides insights into the shape-related properties of MAPbBr₃ single crystals and their directed but ligand-free synthesis.

Fullerenes Enhance Self-Assembly and Electron Injection of Photosystem I in Biophotovoltaic Devices

This paper describes the fabrication of microfluidic devices with a focus on controlling the orientation of photosystem I (PSI) complexes, which directly affects the performance of biophotovoltaic devices by maximizing the efficiency of the extraction of electron/hole pairs from the complexes. The surface chemistry of the electrode on which the complexes assemble plays a critical role in their orientation. We compared the degree of orientation on self-assembled monolayers of phenyl-C61-butyric acid and a custom peptide on nanostructured gold electrodes. Biophotovoltaic devices fabricated with the C61 fulleroid exhibit significantly improved performance and reproducibility compared to those utilizing the peptide, yielding a 1.6-fold increase in efficiency. In addition, the C61-based devices were more stable under continuous illumination. Our findings show that fulleroids, which are well-known acceptor materials in organic photovoltaic devices, facilitate the extraction of electrons from PSI complexes without sacrificing control over the orientation of the complexes, highlighting this combination of traditional organic semiconductors with biomolecules as a viable approach to coopting natural photosynthetic systems for use in solar cells.

Designing small organic non-fullerene acceptor molecules with diflorobenzene or quinoline core and dithiophene donor moiety through density functional theory

The non-fullerene acceptors A1-A5 with diflourobenzene or quinoline core (bridge) unit, donor cyclopenta[1,2-b:3,4-b']dithiophene unit and 2-(2-methylene-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile as acceptor unit with additional phenyl, fulvene or thieno[3,2-d]pyrimidinyl 5-oxide groups have been designed through DFT calculations. The optimization of molecular geometries were performed with density functional theory (DFT) at B3LYP 6-31G (d,p) level of theory. The frontier molecular orbital (FMO) energies, band gap energies and dipole moments (ground and excited state) have been calculated to probe the photovoltaic properties. The band gap (1.42-2.01 eV) and dipole moment values (5.5-18. Debye) showed that these designed acceptors are good candidates for organic solar cells. Time-Dependent Density Functional Theory (TD-DFT) results showed λmax (wave length at maximum absorption) value (611-837 nm), oscillator strength (f) and excitation energies (1.50-2.02 eV) in gas phase and in CHCl3 solvent (1.48-1.89 eV) using integral equation formalism variant (IEFPCM) model. The λmax in CHCl3 showed marginal red shift for all designed acceptors compared with gas phase absorption. The partial density of states (PDOS) has been plotted by using multiwfn which showed that all the designed molecules have more electronic distribution at the donor moiety and lowest at the central bridge. The reorganization energies of electron (λe) (0.0007 eV to 0.017 eV), and the hole reorganization energy values (0.0003 eV to - 0.0403 eV) were smaller which suggested that higher charged motilities. The blends of acceptors A1-A5 with donor polymer D1 provided open circuit voltage (Voc) and ∆HOMO off-set of the HOMO of donor and acceptors. These blends showed 1.04 to 1.5 eV values of Voc and 0 to 0.38 eV ∆HOMO off set values of the donor-acceptor bends which indicate improved performance of the cell. Finally, the blend of D1-A4 was used for the study of distribution of HOMO and LUMO. The HOMO were found distributed on the donor polymer (D1) while the A4 acceptor was found with LUMO distribution. Based on λmax values, and band gap energies (Eg), excitation energies (Ex), reorganization energies; the A3 and A4 will prove good acceptor molecules for the development of organic solar cells.

Application of quantum dots in perovskite solar cells

Perovskite solar cells (PSCs) are important candidates for next-generation thin-film photovoltaic technology due to their superior performance in energy harvesting. At present, their photoelectric conversion efficiencies (PCEs) are comparable to those of silicon-based solar cells. PSCs usually have a multi-layer structure. Therefore, they face the problem that the energy levels between adjacent layers often mismatch each other. Meanwhile, large numbers of defects are often introduced due to the solution preparation procedures. Furthermore, the perovskite is prone to degradation under ultraviolet (UV) irradiation. These problems could degrade the efficiency and stability of PSCs. In order to solve these problems, quantum dots (QDs), a kind of low-dimensional semiconductor material, have been recently introduced into PSCs as charge transport materials, interfacial modification materials, dopants and luminescent down-shifting materials. By these strategies, the energy alignment and interfacial conditions are improved, the defects are efficiently passivated, and the instability of perovskite under UV irradiation is suppressed. So the device efficiency and stability are both improved. In this paper, we overview the recent progress of QDs' utilizations in PSCs.

Green Synthesis and Applications of ZnO and TiO2 Nanostructures

Over the last two decades, oxide nanostructures have been continuously evaluated and used in many technological applications. The advancement of the controlled synthesis approach to design desired morphology is a fundamental key to the discipline of material science and nanotechnology. These nanostructures can be prepared via different physical and chemical methods; however, a green and ecofriendly synthesis approach is a promising way to produce these nanostructures with desired properties with less risk of hazardous chemicals. In this regard, ZnO and TiO2 nanostructures are prominent candidates for various applications. Moreover, they are more efficient, non-toxic, and cost-effective. This review mainly focuses on the recent state-of-the-art advancements in the green synthesis approach for ZnO and TiO2 nanostructures and their applications. The first section summarizes the green synthesis approach to synthesize ZnO and TiO2 nanostructures via different routes such as solvothermal, hydrothermal, co-precipitation, and sol-gel using biological systems that are based on the principles of green chemistry. The second section demonstrates the application of ZnO and TiO2 nanostructures. The review also discusses the problems and future perspectives of green synthesis methods and the related issues posed and overlooked by the scientific community on the green approach to nanostructure oxides.

Bioinspired scaffolds that sequester lead ions in physically damaged high efficiency perovskite solar cells

Hydroxyapatite nanoparticles (HAP NPs) are blended with TiO2 NPs to prepare mixed mesoporous scaffolds which are used to prepare high efficiency perovskite solar cells (PSCs) with a best power conversion efficiency (PCE) of 20.98%. HAP not only increases the PCE but also limits the concentration of Pb released in water from intentionally broken PSCs by ion sequestration thereby potentially offering a promising in-device fail-safe system.

Fullerene Desymmetrization as a Means to Achieve Single-Enantiomer Electron Acceptors with Maximized Chiroptical Responsiveness

Solubilized fullerene derivatives have revolutionized the development of organic photovoltaic devices, acting as excellent electron acceptors. The addition of solubilizing addends to the fullerene cage results in a large number of isomers, which are generally employed as isomeric mixtures. Moreover, a significant number of these isomers are chiral, which further adds to the isomeric complexity. The opportunities presented by single-isomer, and particularly single-enantiomer, fullerenes in organic electronic materials and devices are poorly understood however. Here, ten pairs of enantiomers are separated from the 19 structural isomers of bis[60]phenyl-C61-butyric acid methyl ester, using them to elucidate important chiroptical relationships and demonstrating their application to a circularly polarized light (CPL)-detecting device. Larger chiroptical responses are found, occurring through the inherent chirality of the fullerene. When used in a single-enantiomer organic field-effect transistor, the potential to discriminate CPL with a fast light response time and with a very high photocurrent dissymmetry factor (g_ph  = 1.27 ± 0.06) is demonstrated. This study thus provides key strategies to design fullerenes with large chiroptical responses for use as chiral components of organic electronic devices. It is anticipated that this data will position chiral fullerenes as an exciting material class for the growing field of chiral electronic technologies.

Electrically Enhanced Transition Metal Dichalcogenides as Charge Transport Layers in Metallophthalocyanine-Based Solar Cells

Transitional metal dichalcogenides (TMDs), such as molybdenum disulfide (MoS2) have found application in photovoltaic cells as a charge transporting layer due to their high carrier mobility, chemical stability, and flexibility. In this research, a photovoltaic device was fabricated consisting of copper phthalocyanine (CuPc) as the active layer, exfoliated and Au-doped MoS2, which are n-type and p-type as electron and hole transport layers, respectively. XRD studies showed prominent peaks at (002) and other weak reflections at (100), (103), (006), and (105) planes corresponding to those of bulky MoS2. The only maintained reflection at (002) was weakened for the exfoliated MoS2 compared to the bulk, which confirmed that the material was highly exfoliated. Additional peaks at (111) and (200) planes were observed for the Au doped MoS2. The interlayer spacing (d002) was calculated to be 0.62 nm for the trigonal prismatic MoS2 with the space group P6m2. Raman spectroscopy showed that theE 2 1 g (393 cm-1) and A1g (409 cm-1) peaks for exfoliated MoS2 are closer to each other compared to their bulk counterparts (378 and 408 cm-1, respectively) hence confirming exfoliation. Raman spectroscopy also confirmed doping of MoS2 by Au as the Au-S peak was observed at 320 cm-1. Exfoliation was further confirmed by SEM as when moving from bulky to exfoliated MoS2, a single nanosheet was observed. Doping was further proven by EDS, which detected Au in the sample suggesting the yield of a p-type Au-MoS2. The fabricated device had the architecture: Glass/FTO/Au-MoS2/CuPc/MoS2/Au. A quadratic relationship between I-V was observed suggesting little rectification from the device. Illuminated I-V characterization verified that the device was sensitive and absorbed visible light. Upon illumination, the device was able to absorb photons to create electron-hole pairs and it was evident that semipermeable junctions were formed between Au-MoS2/CuPc and CuPc/MoS2 as holes and electrons were extracted and separated at respective junctions generating current from light. This study indicates that the exfoliated and Au-MoS2 could be employed as an electron transporting layer (ETL) and hole transporting layer (HTL), respectively in fabricating photovoltaic devices.

Photocatalytic H2 Production from Water by Metal-free Dye-sensitized TiO2 Semiconductors: The Role and Development Process of Organic Sensitizers

The utilization of solar energy to produce hydrogen from water is showing increased importance and desirability in the field of artificial photosynthesis to produce clean and sustainable fuels. In a typical three-component dye-sensitized semiconductor system for photocatalysis, the dye sensitizer plays an essential role of energy antenna for harvesting visible light and promoting the reduction reaction to generate hydrogen. In recent decades, a lot of attention has focused on metal-free organic sensitizers, which have the advantages of low cost, high molar extinction coefficient, good modifiability and, most importantly, ability to avoid the use of noble metal ions. This Review enumerates the design strategies, specific properties and photocatalytic performances of metal-free sensitizers in the past 30 years and concludes their evolution process. The advantages of different types of metal-free sensitizers are highlighted and the instructively enlightening experiences are systematic summarized.

Systematic review elucidating the generations and classifications of solar cells contributing towards environmental sustainability integration

Rapid escalation in energy demand and pressure over finite fossil fuels reserves with augmenting urbanization and industrialization points towards adoption of cleaner, sustainable and eco-friendly sources to be employed. Solar cell devices known for efficient conversion of solar energy to electrical energy have been attracting scientific community due to their remarkable conformity with the principles of green chemistry. The future candidacy of solar cells is expressed by their efficient conversion. Such a great potential associated with solar cells has instigated research since many decades leading to the emergence of a wide myriad of solar cells devices with novel constituent materials, designs and architecture reflected in form of three generations of the solar cells. Considering the cleaner and sustainability aspects of the solar energy, current review has systematically compiled different generations of solar cells signifying the advancements in terms of architecture and compositional parameters. In addition to the chronological progression of solar cells, current review has also focused on the innovations done in improvement of solar cells. In terms of efficiency and stability, photovoltaic community is eager to achieve augmented efficiencies and stabilities for using solar cells as an alternative to the conventional fossil fuels.

Potential environmental risk of solar cells: Current knowledge and future challenges

Photovoltaic (PV) technology such as solar cells and devices convert solar energy directly into electricity. Compared to fossil fuels, solar energy is considered a key form of renewable energy in terms of reducing energy-related greenhouse gas emissions and mitigating climate change. To date, the development and improvement of PV technologies has received substantial attention; however, their potential environmental risks remain unknown. Therefore, this review focuses on the potential risks of leachates derived from solar cell devices. We collect scientific literature on toxicity and leaching potential, tabulate the existing data, and discuss related challenges. Insufficient toxicity and environmental risk information currently exists. However, it is known that lead (PbI₂), tin (SnI₂), cadmium, silicon, and copper, which are major ingredients in solar cells, are harmful to the ecosystem and human health if discharged from broken products in landfills or after environmental disasters. Several research directions and policy initiatives for minimizing the environmental risks of PV technology are suggested. This review contributes to both solar energy and environmental science research.

Open-Circuit Voltage of Organic Photovoltaics: A Time-Dependent and Unrestricted DFT Study in a P3HT/PCBM Complex

Solar cells based on blends of poly(3-hexylthiophene) and [6,6]-phenyl-C61-butyric acid methyl ester, P3HT/PCMB, constitute one of the most efficient polymer photovoltaic cell types. One of the main factors that determine the efficiency of the solar cells is the open-circuit voltage, V_OC. In this work, we provide an analysis of the parameters affecting the V_OC in a P3HT/PCBM complex. Electronic transitions, excited states, and electron transfer parameters are evaluated under the classical Marcus formalism via the time-dependent and unrestricted CAM-B3LYP/6-31G* methods. The charge-recombination driving force is found to mainly affect the charge-recombination rate constant and, in turn, V_OC. Even though other parameters also determine the value of V_OC like density of states, dimensions of the cell, and microstructure of the donor/acceptor interface, the current work highlights the understanding attained by modeling charge-transfer parameters. The analysis reported here encourage further quantum-chemical investigations in organic photovoltaics with the aim of estimating and improving V_OC, such that more efficient organic solar cells may be predicted.

A novel low-bandgap pyridazine thiadiazole-based conjugated polymer with deep molecular orbital levels

A pyridazine thiadiazole acceptor (PzT) has been utilised in the synthesis of a novel low band-gap D–A copolymer PTTPz.

Tetrahedral amorphous carbon prepared filter cathodic vacuum arc for hole transport layers in perovskite solar cells and quantum dots LEDs

(ta-C) films coated through the filtered cathodic vacuum arc (FCVA) process as a hole transport layer (HTL) for perovskite solar cells (PSCs) and quantum dot light-emitting diodes (QDLEDs). The p-type ta-C film has several remarkable features, including ease of fabrication without the need for thermal annealing, reasonable electrical conductivity, optical transmittance, and a high work function. X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy examinations show that the electrical properties (sp³/sp² hybridized bond) and work function of the ta-C HTL are appropriate for PSCs and QDLEDs. In addition, in order to correlate the performance of the devices, the optical, surface morphological, and structural properties of the FCVA-grown ta-C films with different thicknesses (5 ~ 20 nm) deposited on the ITO anode are investigated in detail. The optimized ta-C film with a thickness of 5 nm deposited on the ITO anode had a sheet resistance of 10.33 Ω^-2, a resistivity of 1.34 × 10^-4 Ω cm, and an optical transmittance of 88.97%. Compared to the reference PSC with p-NiO HTL, the PSC with 5 nm thick ta-C HTL yielded a higher power conversion efficiency (PCE, 10.53%) due to its improved fill factor. Further, the performance of QDLEDs with 5 nm thick ta-C hole injection layers (HIL) showed better than the performance of QDLEDs with different ta-C thicknesses. It is concluded that ta-C films have the potential to serve as HTL and HIL in next-generation PSCs and QDLEDs.

Spontaneous Complexation of Fullerene Aggregates on Nanodiamond Aggregates and Their Enhanced Photocurrent Generation

Supramolecular composites composed of fullerene C₆₀ and carbon nanodiamond (ND) were constructed through spontaneous complexation of C₆₀ aggregates onto the surface of ND aggregates in N-methylpyrrolidone (NMP). The resulting C₆₀ -ND composite was assembled onto a nanostructured SnO₂ electrode by an electrophoretic deposition method. Formation of the C₆₀ -ND composite was confirmed by dynamic light scattering (DLS) and field-emission scanning electron microscopy (FESEM). The C₆₀ -ND composite on the SnO₂ electrode showed high incident photon-to-current efficiencies (IPCEs) in the visible region as compared with the single component system of C₆₀ or ND. The improved photocurrent generation of the C₆₀ -ND composite may result from the photoinduced charge separation at the interface between C₆₀ and ND. These results obtained here will provide valuable information on the design of optoelectronic devices based on all-nanocarbon materials.

Solution Processing Dependent Bulk Heterojunction Nanomorphology of P3HT/PCBM Thin Films

Mixtures of poly(3-hexyl-thiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) have been widely employed as donor and acceptor materials, respectively, for the active layer of the bulk heterojunction (BHJ) organic solar cells. Experiments are able to provide only limited insights on the dynamics of blend morphology of these organic materials because of the challenges in extracting microstructural characterization amidst the poor contrast in electron microscopy. We present results from coarse-grained molecular dynamics simulations (CGMD) describing the morphological evolution of P3HT/PCBM active layer under solution processing in chlorobenzene (CB). We examine the impact of various processing parameters such as weight ratio, degree of polymerization (DOP), thermal annealing, and preheating on the BHJ active layers using morphological characterizations from atomic trajectories. Simulated diffraction patterns are compared with experimental results of X-ray diffraction and Small Angle X-ray Scattering (SAXS). Both simulated scattering and experimental X-ray diffraction and X-ray scattering measurements reveal increase in crystallinity for P3HT upon annealing until PCBM weight fraction ∼50%. The solubility of PCBM being greater in CB than that of P3HT facilitates the phase separation of the polymer during early stages of solvent evaporation. An increase in the average size of the P3HT domain relative to the preannealed morphology, is due to phase segregation and crystallization of the polymer upon annealing. Percolation for PCBM remains unchanged until PCBM constitutes at least one-half of the composition. Although 1.0:2.0 weight ratio is predicted to be ideal for balanced charge transport, 1.0:1.0 weight ratio is the most beneficial of overall power conversion based on exciton generation and charge separation at the interface. DOP of P3HT molecules is another important design variable as larger P3HT molecules tend to entangle more often deteriorating molecular order of P3HT phase in the active layer. Preheating the ternary mixture of P3HT, PCBM, and CB modifies the structural order and morphology of the BHJ due to changes in PCBM diffusion into the P3HT phase.

Powering the Environmental Internet of Things

The Internet of Things (IoT) is a constantly-evolving area of research and touches almost every aspect of life in the modern world. As technology moves forward, it is becoming increasingly important for these IoT devices for environmental sensing to become self-powered to enable long-term operation. This paper provides an outlook on the current state-of-the-art in terms of energy harvesting for these low-power devices. An analytical approach is taken, first defining types of environments in which energy-harvesters operate, before exploring both well-known and novel energy harvesting techniques and their uses in modern-day sensing.

ZnO:Ga-graded ITO electrodes to control interface between PCBM and ITO in planar perovskite solar cells

Ga-doped ZnO (GZO)-graded layer, facilitating electron extraction from electron transport layer, was integrated on the surface of transparent indium tin oxide (ITO) cathode by using graded sputtering technique to improve the performance of planar n-i-p perovskite solar cells (PSCs). The thickness of graded GZO layer was controlled to optimize GZO-indium tin oxide (ITO) combined electrode for planar n-i-p PSCs. At optimized graded thickness of 15 nm, the GZO-ITO combined electrode showed an optical transmittance of 95%, a resistivity of 2.3 × 10^-4 Ohm cm, a sheet resistance of 15.6 Ohm/square, and work function of 4.23 eV, which is well matched with the 4.0-eV lowest unoccupied molecular orbital of [6,6]-phenyl-C₆₁-butyric acid methyl ester. Owing to enhanced extraction of electron by the graded GZO, the n-i-p PSC with GZO-ITO combined electrode showed higher power conversion efficiency (PCE) of 9.67% than the PCE (5.25%) of PSC with only ITO electrode without GZO-graded layer. In addition, the GZO integrated-ITO electrode acts as transparent electrode and electron extraction layer simultaneously due to graded mixing of the GZO at the surface region of ITO electrode.

A zwitterionic polymer as an interfacial layer for efficient and stable perovskite solar cells

Perovskite solar cells have been rapidly developed in the past ten years. It was demonstrated that the interfacial layer plays an important role in device performance of perovskite solar cells. In this study, we report utilization of a photoinitiation-crosslinked zwitterionic polymer, namely dextran with carboxybetaine modified by methacrylate (Dex-CB-MA), as an interfacial layer to improve the film morphology of the CH₃NH₃PbI₃ photoactive layer and the interfacial contact between the poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) hole extraction layer and CH₃NH₃PbI₃ photoactive layer. It is found that the Dex-CB-MA thin layer forms a better band alignment between the PEDOT:PSS hole extraction layer and CH₃NH₃PbI₃ photoactive layer, and improves the crystallization of the CH₃NH₃PbI₃ photoactive layer, resulting in efficient charge carrier transport. As a result, perovskite solar cells with the PEDOT:PSS/Dex-CB-MA hole extraction layer exhibit more than 30% enhancement in efficiency and dramatically boosted stability as compared with that with the PEDOT:PSS hole extraction layer. Our studies provide an effective and facile way to fabricate stable perovskite solar cells with high power conversion efficiency.

The zwitterionic polymer, Dex-CB-MA thin layer forms a better band alignment between the PEDOT:PSS hole extraction layer and CH₃NH₃PbI₃ photoactive layer, and improve the crystallization of CH₃NH₃PbI₃ photoactive layer, resulting in efficient charge carrier transport.

The Impact of Hybrid Compositional Film/Structure on Organic⁻Inorganic Perovskite Solar Cells

Perovskite solar cells (PSCs) have been intensively investigated over the last several years. Unprecedented progress has been made in improving their power conversion efficiency; however, the stability of perovskite materials and devices remains a major obstacle for the future commercialization of PSCs. In this review, recent progress in PSCs is summarized in terms of the hybridization of compositions and device architectures for PSCs, with special attention paid to device stability. A brief history of the development of PSCs is given, and their chemical structures, optoelectronic properties, and the different types of device architectures are discussed. Then, perovskite composition engineering is reviewed in detail, with particular emphasis on the cationic components and their impact on film morphology, the optoelectronic properties, device performance, and stability. In addition, the impact of two-dimensional and/or one-dimensional and nanostructured perovskites on structural and device stability is surveyed. Finally, a future outlook is proposed for potential resolutions to overcome the current issues.

Surface structure, optoelectronic properties and charge transport in ZnO nanocrystal/MDMO-PPV multilayer films

Blends of semiconducting nanocrystals and conjugated polymers continue to attract major research interest because of their potential applications in optoelectronic devices, such as solar cells, photodetectors and light-emitting diodes. In this study we investigate the surface structure, morphological and optoelectronic properties of multilayer films constructed from ZnO nanocrystals (NCs) and poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV). The effects of layer number and ZnO concentration (C_ZnO) used on the multilayer film properties are investigated. An optimised solvent blend enabled well-controlled layers to be sequentially spin coated and the construction of multilayer films containing six ZnO NC (Z) and MDMO-PPV (M) layers (denoted as (ZM)₆). Contact angle data showed a strong dependence on C_ZnO and indicated distinct differences in the coverage of MDMO-PPV by the ZnO NCs. UV-visible spectroscopy showed that the MDMO-PPV absorption increased linearly with the number of layers in the films and demonstrates highly tuneable light absorption. Photoluminescence spectra showed reversible quenching as well as a surprising red-shift of the MDMO-PPV emission peak. Solar cells were constructed to probe vertical photo-generated charge transport. The measurements showed that (ZM)₆ devices prepared using C_ZnO = 14.0 mg mL^-1 had a remarkably high open circuit voltage of ∼800 mV. The device power conversion efficiency was similar to that of a control bilayer device prepared using a much thicker MDMO-PPV layer. The results of this study provide insight into the structure-optoelectronic property relationships of new semiconducting multilayer films which should also apply to other semiconducting NC/polymer combinations.

Structural Identification of 19 Purified Isomers of the OPV Acceptor Material bisPCBM by 13C NMR and UV-Vis Absorption Spectroscopy and High-Performance Liquid Chromatography

The molecular structures of 19 purified isomers of bis-phenyl-C₆₂-butyric acid methyl ester were identified by a combination of ¹³C NMR and UV-vis absorption spectroscopies and high-performance liquid chromatography (HPLC) retention time analysis. All 19 isomers are dicyclopropafullerenes (none are homofullerenes). There were seven isomers with C₁ molecular point-group symmetry, four with C _s, six with C₂, one with C_{2 v}, and one with C_{2 h} symmetry. The C_{2 h}, C_{2 v}, and all five nonequatorial C₁ isomers were unambiguously assigned to their respective HPLC fractions. For the other 12 isomers, the ¹³C NMR and UV-vis spectra placed them in six groups of two same-symmetry isomers. On the basis of the widely spaced HPLC retention times of the two isomers within each of these six groups, and the empirical inverse correlation between retention time and addend spacing, each isomer was assigned to its corresponding HPLC fraction. In addition, the missing trans-1 isomer was found, purified, and characterized.

A novel and cost effective CZTS hole transport material applied in perovskite solar cells

CZTS nano-particles are synthesized under ambient condition and applied as low-cost and sustainable inorganic HTM in Perovskite solar cells.

Unique cohesive nature of the β1-isomer of [70]PCBM fullerene on structures and photovoltaic performances of bulk heterojunction films with PffBT4T-2OD polymers

Decreasing the amount of a diastereomer of β-[70]PCBM with high aggregation tendency improved the performances of OPV devices with PffBT4T-2OD:[70]PCBM films.

Probing photoinduced electron-transfer in graphene-dye hybrid materials for DSSC

We investigated the photophysical properties of a newly synthesized hybrid material composed of a triphenylamine dye covalently bound to reduced graphene oxide, potentially relevant as a stable photosensitizer in dye-sensitized solar cells. The photophysical characterization has been carried out by means of fluorescence quenching and fluorescence lifetime measurements, complemented by Electron Paramagnetic Resonance (EPR) spectroscopy, aimed at the detailed description of the photoinduced processes occurring in the hybrid and in the mixed hybrid/N-doped TiO₂ material. The combined optical/magnetic study unequivocally demonstrates a fast quenching of the dye excited state in the isolated hybrid and an efficient electron transfer to N-doped titania nanopowders. In the latter case, a metastable radical cation on the dye moiety is photogenerated and the corresponding negative charge, an electron, is trapped in defect sites of the doped semiconductor oxide. The spin distribution in the stable radical has been determined by EPR spectroscopy and correlated with DFT calculations.