Engineering of biomimetic nanofibrous matrices for drug delivery and tissue engineering

Design of Collagen and Gelatin-based Electrospun Fibers for Biomedical Purposes: An Overview

Collagen and gelatin are essential natural biopolymers commonly utilized in biomaterials and tissue engineering because of their excellent physicochemical and biocompatibility properties. They can be used either in combination with other biomacromolecules or particles or even exclusively for the enhancement of bone regeneration or for the development of biomimetic scaffolds. Collagen or gelatin derivatives can be transformed into nanofibrous materials with porous micro- or nanostructures and superior mechanical properties and biocompatibility using electrospinning technology. Specific attention was recently paid to electrospun mats of such biopolymers, due to their high ratio of surface area to volume, as well as their biocompatibility, biodegradability, and low immunogenicity. The fiber mats with submicro- and nanometer scale can replicate the extracellular matrix structure of human tissues and organs, making them highly suitable for use in tissue engineering due to their exceptional bioaffinity. The drawbacks may include rapid degradation and complete dissolution in aqueous media. The use of gelatin/collagen electrospun nanofibers in this form is thus greatly restricted for biomedicine. Therefore, the cross-linking of these fibers is necessary for controlling their aqueous solubility. This led to enhanced biological characteristics of the fibers, rendering them excellent options for various biomedical uses. The objective of this review is to highlight the key research related to the electrospinning of collagen and gelatin, as well as their applications in the biomedical field. The review features a detailed examination of the electrospinning fiber mats, showcasing their varying structures and performances resulting from diverse solvents, electrospinning processes, and cross-linking methods. Judiciously selected examples from literature will be presented to demonstrate major advantages of such biofibers. The current developments and difficulties in this area of research are also being addressed.

Research Progress of Design Drugs and Composite Biomaterials in Bone Tissue Engineering

Bone, like most organs, has the ability to heal naturally and can be repaired slowly when it is slightly injured. However, in the case of bone defects caused by diseases or large shocks, surgical intervention and treatment of bone substitutes are needed, and drugs are actively matched to promote osteogenesis or prevent infection. Oral administration or injection for systemic therapy is a common way of administration in clinic, although it is not suitable for the long treatment cycle of bone tissue, and the drugs cannot exert the greatest effect or even produce toxic and side effects. In order to solve this problem, the structure or carrier simulating natural bone tissue is constructed to control the loading or release of the preparation with osteogenic potential, thus accelerating the repair of bone defect. Bioactive materials provide potential advantages for bone tissue regeneration, such as physical support, cell coverage and growth factors. In this review, we discuss the application of bone scaffolds with different structural characteristics made of polymers, ceramics and other composite materials in bone regeneration engineering and drug release, and look forward to its prospect.

Nanofibers in Ocular Drug Targeting and Tissue Engineering: Their Importance, Advantages, Advances, and Future Perspectives

Nanofibers are frequently encountered in daily life as a modern material with a wide range of applications. The important advantages of production techniques, such as being easy, cost effective, and industrially applicable are important factors in the preference for nanofibers. Nanofibers, which have a broad scope of use in the field of health, are preferred both in drug delivery systems and tissue engineering. Due to the biocompatible materials used in their construction, they are also frequently preferred in ocular applications. The fact that they have a long drug release time as a drug delivery system and have been used in corneal tissue studies, which have been successfully developed in tissue engineering, stand out as important advantages of nanofibers. This review examines nanofibers, their production techniques and general information, nanofiber-based ocular drug delivery systems, and tissue engineering concepts in detail.

Electrohydrodynamic Techniques for the Manufacture and/or Immobilization of Vesicles

The development of accurate drug delivery systems is one of the main challenges in the biomedical field. A huge variety of structures, such as vesicles, nanoparticles, and nanofibers, have been proposed as carriers for bioactive agents, aiming for precision in administration and dosage, safety, and bioavailability. This review covers the use of electrohydrodynamic techniques both for the immobilization and for the synthesis of vesicles in a non-conventional way. The state of the art discusses the most recent advances in this field as well as the advantages and limitations of electrospun and electrosprayed amphiphilic structures as precursor templates for the in situ vesicle self-assembly. Finally, the perspectives and challenges of combined strategies for the development of advanced structures for the delivery of bioactive agents are analyzed.

Gelatin-based electrospun and lyophilized scaffolds with nano scale feature for bone tissue engineering application: review

The rebuilding of the normal functioning of the damaged human body bone tissue is one of the main objectives of bone tissue engineering (BTE). Fabricated scaffolds are mostly treated as artificial supports and as materials for regeneration of neo bone tissues and must closely biomimetic the native extracellular matrix of bone. The materials used for developing scaffolds should be biodegradable, nontoxic, and biocompatible. For the resurrection of bone disorder, specifically natural and synthetic polymers such as chitosan, PCL, gelatin, PGA, PLA, PLGA, etc. meet the requirements for serving their functions as artificial bone substitute materials. Gelatin is one of the potential candidates which could be blended with other polymers or composites to improve its physicochemical, mechanical, and biological performances as a bone graft. Scaffolds are produced by several methods including electrospinning, self-assembly, freeze-drying, phase separation, fiber drawing, template synthesis, etc. Among them, freeze-drying and electrospinning are among the popular, simplest, versatile, and cost-effective techniques. The design and preparation of freeze-dried and electrospun scaffolds are of intense research over the last two decades. Freeze-dried and electrospun scaffolds offer a distinctive architecture at the micro to nano range with desired porosity and pore interconnectivity for selective movement of small biomolecules and play its role as an appropriate matrix very similar to the natural bone extracellular matrix. This review focuses on the properties and functionalization of gelatin-based polymer and its composite in the form of bone scaffolds fabricated primarily using lyophilization and electrospinning technique and their applications in BTE.

Chitosan films and scaffolds for regenerative medicine applications: A review

Over the last years, chitosan has demonstrated unparalleled characteristics for regenerative medicine applications. Beside excellent antimicrobial and wound healing properties, this polysaccharide biopolymer offers favorable characteristics such as biocompatibility, biodegradability, and film and fiber-forming capabilities. Having plentiful active amine groups, chitosan can be also readily modified to provide auxiliary features for growing demands in regenerative medicine, which is constantly confronted with new problems, necessitating the creation of biocompatible, immunogenic and biodegradable film/scaffold composites. A new look at the chitosan composites structure/activity/application tradeoff is the primary focus of the current review, which can help researchers to detect the bottlenecks and overcome the shortcomings that arose from this intersection. In the current review, the most recent advances in chitosan films and scaffolds in terms of preparation techniques and modifying methods for improving their functional properties, in three major biomedical fields i.e., tissue engineering, wound healing, and drug delivery are surveyed and discussed.

Smart Cargo Delivery System based on Mesoporous Nanoparticles for Bone Disease Diagnosis and Treatment

Bone diseases constitute a major issue for modern societies as a consequence of progressive aging. Advantages such as open mesoporous channel, high specific surface area, ease of surface modification, and multifunctional integration are the driving forces for the application of mesoporous nanoparticles (MNs) in bone disease diagnosis and treatment. To achieve better therapeutic effects, it is necessary to understand the properties of MNs and cargo delivery mechanisms, which are the foundation and key in the design of MNs. The main types and characteristics of MNs for bone regeneration, such as mesoporous silica (mSiO2 ), mesoporous hydroxyapatite (mHAP), mesoporous calcium phosphates (mCaPs) are introduced. Additionally, the relationship between the cargo release mechanisms and bone regeneration of MNs-based nanocarriers is elucidated in detail. Particularly, MNs-based smart cargo transport strategies such as sustained cargo release, stimuli-responsive (e.g., pH, photo, ultrasound, and multi-stimuli) controllable delivery, and specific bone-targeted therapy for bone disease diagnosis and treatment are analyzed and discussed in depth. Lastly, the conclusions and outlook about the design and development of MNs-based cargo delivery systems in diagnosis and treatment for bone tissue engineering are provided to inspire new ideas and attract researchers' attention from multidisciplinary areas spanning chemistry, materials science, and biomedicine.

Nanofibrous Foams of Poly(3-hydroxybutyrate)/Cellulose Nanocrystal Composite Fabricated Using Nonsolvent-Induced Phase Separation

In this study, we fabricated nanofibrous foams of neat poly(3-hydroxybutyrate) (PHB) and PHB/cellulose nanocrystal (CNC) nanocomposite using nonsolvent-induced phase separation (NIPS) followed by solvent extraction. Two different nonsolvents, tetrahydrofuran (THF) and 1,4-dioxane (Diox), in combination with the solvent, chloroform (CF), were used for NIPS. The parameters of NIPS-derived crystallization kinetics were calculated using Avrami analysis of time-dependent infrared spectral measurements. The lower viscosity and poorer PHB affinity of THF than those of Diox resulted in rapid crystallization and gelation rate, which in turn resulted in higher strength of the foam. The mechanical reinforcement by the incorporation of CNCs was achieved for the composite foam prepared in Diox/CF but not in THF/CF, owing to the relatively better dispersion of the CNCs in Diox than that in THF. A rapid rate of NIPS-derived crystallization and gelation was achieved in THF/CF with the incorporation of CNCs, indicating the effective crystal nucleation of CNCs. However, the presence of CNCs deaccelerated the crystallization in Diox/CF, indicating that the inhibition effect of PHB mobility became more dominant than the nucleation effect of CNCs; this was because the CNC dispersion became more homogeneous in Diox/CF. In vitro cell viability assays exhibited excellent cytocompatibility of the foams, thereby showing potential for use in biomedical applications.

Nonsolvent-induced phase separation of poly(3-hydroxybutyrate) and poly(hydroxybutyrate-co-hydroxyvalerate) blend as a facile platform to fabricate versatile nanofiber gels: Aero-, hydro-, and oleogels

We demonstrated a strategy to prepare different types of 3-D nanofibrous polymeric gels, including hydro-, aero-, and oleogels by nonsolvent-induced phase separation (NIPS). NIPS-derived gel monoliths of poly(3-hydroxybutyrate) (PHB) and poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) blends were converted into hydrogels and aerogels by solvent exchange and freeze-drying, respectively. The high hydrophobicity and porosity of the nanofibrous PHB/PHBV aerogels enabled them to absorb various oils and swell to 20-30 times their own weight. The pseudo-second-order model was successfully used to describe the oil absorption behavior, and the obtained absorption rate constant increased with increasing PHBV content. The oil-swollen aerogels were highly elastic, thereby indicating that NIPS-derived aerogels are an excellent template for the fabrication of oleogels. With an increase in the PHBV ratio, the gels exhibited reduced modulus and collapse strength but increased collapse strain, thereby revealing higher ductility by compression. The rapid separation and re-binding of the liquid phase entrapped in the nanofiber network resulted in the unique thixotropic properties of the hydro- and oleogels. Indomethacin, a hydrophobic model drug, was successfully incorporated into injectable self-healing oleogels containing soybean oil and aerogels. These gels exhibited excellent cytocompatibility, and a better sustained drug release was observed for the oleogels compared to the aerogels.

Construction of a nanofiber network within 3D printed scaffolds for vascularized bone regeneration

3D printed scaffolds with micro and nano architectures that facilitate cell growth and migration were prepared, and the scaffolds allowed deferoxamine release to accelerate bone formation.

3-D macro/microporous-nanofibrous bacterial cellulose scaffolds seeded with BMP-2 preconditioned mesenchymal stem cells exhibit remarkable potential for bone tissue engineering

Bone repair using BMP-2 is a promising therapeutic approach in clinical practices, however, high dosages required to be effective pose issues of cost and safety. The present study explores the potential of low dose BMP-2 treatment via tissue engineering approach, which amalgamates 3-D macro/microporous-nanofibrous bacterial cellulose (mNBC) scaffolds and low dose BMP-2 primed murine mesenchymal stem cells (C3H10T1/2 cells). Initial studies on cell-scaffold interaction using unprimed C3H10T1/2 cells confirmed that scaffolds provided a propitious environment for cell adhesion, growth, and infiltration, owing to its ECM-mimicking nano-micro-macro architecture. Osteogenic studies were conducted by preconditioning the cells with 50 ng/mL BMP-2 for 15 min, followed by culturing on mNBC scaffolds for up to three weeks. The results showed an early onset and significantly enhanced bone matrix secretion and maturation in the scaffolds seeded with BMP-2 primed cells compared to the unprimed ones. Moreover, mNBC scaffolds alone were able to facilitate the mineralization of cells to some extent. These findings suggest that, with the aid of 'osteoinduction' from low dose BMP-2 priming of stem cells and 'osteoconduction' from nano-macro/micro topography of mNBC scaffolds, a cost-effective bone tissue engineering strategy can be designed for quick and excellent in vivo osseointegration.

Biomimetic Membranes of Methacrylated Gelatin/Nanohydroxyapatite/Poly(l-Lactic Acid) for Enhanced Bone Regeneration

Nanofibrous poly(l-lactic acid) (PLLA) membrane-simulated extracellular matrices (ECMs) can be used in the biomedical field. However, the hydrophobic nature and poor osteoinductive property of PLLA limit its application in guided bone regeneration (GBR). In this work, a methacrylated gelatin/nano-HA (GelMA/nHA) complex was first synthesized in situ and then introduced into PLLA to fabricate biomimetic GelMA/nHA/PLLA membranes, mimicking the nanofibrous architecture and composition of ECMs by electrospinning and photocrosslinking. Compared to PLLA and GelMA/PLLA membranes, the novel GelMA/nHA/PLLA membranes demonstrated better tensile, hydrophilic, water sorption, and degradation properties. An in vitro biological evaluation indicated that the membranes promoted human bone marrow-derived mesenchymal stem cell (hBMSC) proliferation, adhesion, and osteogenic differentiation. Critical-sized defects in rat models were used to evaluate the bone regeneration performances of the three kinds of membranes in vivo, and the GelMA/nHA/PLLA membranes demonstrated excellent osteogenic regeneration potential. Therefore, GelMA/nHA/PLLA membranes have wide application prospects in bioengineering applications such as GBR treatment.

Fabrication of vascular smooth muscle-like tissues based on self-organization of circumferentially aligned cells in microengineered hydrogels

Circumferential alignment of vascular smooth muscle cells (vSMCs) is critical to form an in vivo-like vascular smooth muscle layer in vitro. Although many techniques to elicit such an alignment on 3D substrates have been demonstrated, it remains a challenge to recapitulate the circumferential cellular alignment of vascular smooth muscle tissues in 3D hydrogels. Here, we propose a spring-like gelatin methacrylate (GelMA) structure formed by semi-automated reeling of a core-shell microfiber at the micro-scale. The resulting structures facilitate circumferential alignment and self-organization of encapsulated human mesenchymal stem cells (MSCs) into multilayer spring-like cellular structures. Based on the permeable tubular lumens of these structures, a perfusion culture micro-system is developed to further facilitate the vSMC differentiation of MSCs under the effect of TGF-β1. We also evaluated the MSC contraction-induced shrinkage of the resulting cellular structures. These results demonstrate the successful in vitro regeneration of vascular smooth muscle (vSM)-like tissues in 3D environments. Compared with the substrate surface, the porous structure in hydrogels is more similar to cell microenvironments in vivo. Thus, this approach may be used to develop an in vitro model for the study of vascular tissue regeneration and the mechanism of vascular remolding during hypertension.

A new method for the preparation of three-layer vascular stents: a preliminary study on the preparation of biomimetic three-layer vascular stents using a three-stage electrospun membrane

There is an urgent need to design a tissue-engineered vascular graft that exhibits good biocompatibility and sufficient mechanical strength to repair and facilitate regeneration of defective vascular tissue. It is generally accepted that multi-layer stents can be used to simulate the structure and function of natural blood vessels. Here, we developed a new three-layer tubular graft that is rolled from a single Poly(L-lactide-co-caprolactone) electrospun membrane. We used a new electrospinning technique to place three different structures on a single electrospun membrane such that the stent is comprised of three different layers. The inner layer is dense and suitable for endothelial cell growth, the middle layer is a parallel loose structure suitable for smooth muscle cell growth, and the outer layer is a parallel structure with sparse alternating texture suitable for both smooth muscle cell growth and structural support. The vascular stent has good tensile strength. At the same time, endothelial cells and smooth muscle cells readily proliferate on the material in vitro. In particular, smooth muscle cells grow in parallel on the middle and outer materials. In vivo, all layers of the vascular graft were infiltrated by cells within one week of subcutaneous implantation, indicative of favorable biocompatibility. After a week of subcutaneous implantation, the vascular stent was orthotopically transplanted into the abdominal aorta of Sprague Dawley rats. After ten weeks of transplantation, ultrasound imaging of the abdomen showed vascular patency. The vascular stent was endothelialized, smooth muscle cells readily proliferated, and a large amount of elastic fibers were formed. Therefore, our specially designed tri-layer vascular graft may be of significant benefit in vascular reconstruction.

Porous Poly(3-hydroxybutyrate) Scaffolds Prepared by Non-Solvent-Induced Phase Separation for Tissue Engineering

Highly porous poly(3-hydroxybutyrate) (PHB) scaffolds were fabricated using non-solvent-induced phase separation with chloroform as the solvent and tetrahydrofuran as the non-solvent. The microporosity, nanofiber morphology, and mechanical strength of the scaffolds were adjusted by varying the fabrication parameters, such as the polymer concentration and solvent composition. The influence of these parameters on the structure and morphology of PHB organogels and scaffolds was elucidated using small-angle neutron scattering and scanning electron microscopy. The organogels and scaffolds in this study have a complex hierarchical structure, extending over a wide range of length scales. In vitro viability assays were performed using the human keratinocyte cell line (HaCaT), and all PHB scaffolds demonstrated the excellent cell viability. Microporosity had the greatest impact on HaCaT cell proliferation on PHB scaffolds, which was determined after a 3-day incubation period with scaffolds of different morphologies and mechanical properties. The superior cell viability and the controlled scaffold properties and morphologies suggested PHB scaffolds fabricated by non-solvent-induced phase separation using chloroform and tetrahydrofuran as promising biomaterials for the applications of tissue engineering, particularly of epidermal engineering.

Electronic Supplementary Material

Supplementary material is available in the online version of this article at 10.1007/s13233-020-8109-x.

The synergetic effect of bioactive molecule-loaded electrospun core-shell fibres for reconstruction of critical-sized calvarial bone defect-The effect of synergetic release on bone Formation

OBJECTIVES

Bone regeneration is a complex process modulated by multiple growth factors and hormones during long regeneration period; thus, designing biomaterials with the capacity to deliver multiple bioactive molecules and obtain sustained release has gained an increasing popularity in recent years. This study is aimed to evaluate the effect of a novel core-shell electrospun fibre loaded with dexamethasone (DEX) and bone morphogenetic protein-2 (BMP-2) on bone regeneration.

MATERIALS AND METHODS

The core-shell electrospun fibres were fabricated by coaxial electrospinning technology, which were composed of poly-D, L-lactide (PLA) shell and poly (ethylene glycol) (PEG) core embedded with BMP-2 and DEX-loaded micelles. Morphology, hydrophilicity, gradation, release profile of BMP-2 and DEX, and cytological behaviour on bone marrow mesenchymal stem cells (BMSCs) were characterized. Furthermore, the effect on bone regeneration was evaluated via critical-sized calvarial defect model.

RESULTS

The electrospun fibres were featured by the core-shell fibrous architecture and a suitable degradation rate. The sustained release of DEX and BMP-2 was up to 562 hours. The osteogenic gene expression and calcium deposition of BMSCs were significantly enhanced, indicating the osteoinduction capacity of electrospun fibres. This core-shell fibre could accelerate repair of calvarial defects in vivo via synergistic effect.

CONCLUSIONS

This core-shell electrospun fibre loaded with DEX and BMP-2 can act synergistically to enhance bone regeneration, which stands as a strong potential candidate for repairing bone defects.

Naturally Drug-Loaded Chitin: Isolation and Applications

Naturally occurring three-dimensional (3D) biopolymer-based matrices that can be used in different biomedical applications are sustainable alternatives to various artificial 3D materials. For this purpose, chitin-based structures from marine sponges are very promising substitutes. Marine sponges from the order Verongiida (class Demospongiae) are typical examples of demosponges with well-developed chitinous skeletons. In particular, species belonging to the family Ianthellidae possess chitinous, flat, fan-like fibrous skeletons with a unique, microporous 3D architecture that makes them particularly interesting for applications. In this work, we focus our attention on the demosponge Ianthella flabelliformis (Linnaeus, 1759) for simultaneous extraction of both naturally occurring ("ready-to-use") chitin scaffolds, and biologically active bromotyrosines which are recognized as potential antibiotic, antitumor, and marine antifouling substances. We show that selected bromotyrosines are located within pigmental cells which, however, are localized within chitinous skeletal fibers of I. flabelliformis. A two-step reaction provides two products: treatment with methanol extracts the bromotyrosine compounds bastadin 25 and araplysillin-I N20 sulfamate, and a subsequent treatment with acetic acid and sodium hydroxide exposes the 3D chitinous scaffold. This scaffold is a mesh-like structure, which retains its capillary network, and its use as a potential drug delivery biomaterial was examined for the first time. The results demonstrate that sponge-derived chitin scaffolds, impregnated with decamethoxine, effectively inhibit growth of the human pathogen Staphylococcus aureus in an agar diffusion assay.

Drug therapies and delivery mechanisms to treat perturbed skin wound healing

Acute wound healing is an orderly process of four overlapping events: haemostasis, inflammation, proliferation and remodelling. A drug delivery system with a temporal control of release could promote each of these events sequentially. However, acute wound healing normally proceeds very well in healthy individuals and there is little need to promote it. In the elderly and diabetics however, healing is often slow and wounds can become chronic and we need to promote their healing. Targeting the events of acute wound healing would not be appropriate for a chronic wound, which have stalled in the proinflammatory phase. They also have many additional problems such as poor circulation, low oxygen, high levels of leukocytes, high reactive oxygen species, high levels of proteolytic enzymes, high levels of proinflammatory cytokines, bacterial infection and high pH. The future challenge will be to tackle each of these negative factors to create a wound environment conducive to healing.

14-3-3ε protein-immobilized PCL-HA electrospun scaffolds with enhanced osteogenicity

Adipose-derived mesenchymal stem cells (ASCs) accelerate the osteointegration of bone grafts and improve the efficiency in the formation of uniform bone tissue, providing a practical and clinically attractive approach in bone tissue regeneration. In this work, the effect of nanofibrous biomimetic matrices composed of poly(ε-caprolactone) (PCL), nanometric hydroxyapatite (nHA) particles and 14-3-3 protein isoform epsilon on the initial stages of human ASCs (hASCs) osteogenic differentiation was investigated. The cells were characterized by flow cytometry and induction to differentiation to adipogenic and osteogenic lineages. The isolated hASCs were induced to differentiate to osteoblasts over all scaffolds, and adhesion and viability of the hASCs were found to be similar. However, the activity of alkaline phosphatase (ALP) as early osteogenic marker in the PCL-nHA/protein scaffold was four times higher than in PCL-nHA and more than five times than the measured in neat PCL.

Effects and efficacy of different sterilization and disinfection methods on electrospun drug delivery systems

Microbiological quality of a pharmaceutical product is an essential requirement ensuring patient safety, thus effective sterilization/disinfection methods need to be found. The aim of this study was to evaluate the efficacy of different sterilization/disinfection methods on drug-loaded electrospun matrices and the impact of these treatments on the functionality related characteristics of these matrices. The sterilization efficacy of gamma-irradiation, ultraviolet-irradiation, in situ generated chlorine gas and low-pressure argon plasma treatment were evaluated on two different chloramphenicol-loaded electrospun matrices using pristine polycaprolactone (PCL) as a carrier polymer or PCL in combination with polyethylene oxide. Drug stability, solid state properties, morphology, mechanical properties, swelling, biodegradation and drug release kinetics were studied before and after the treatments. It was shown that all tested methods help to reduce bioburden and only plasma treated matrices were not sterile. At the same time drug degradation after the treatment can be considerable and depends not only on the susceptibility of the drug to degradation, but also on matrix properties (e.g. the nature of carrier polymers). Even though no morphological changes were observed, gamma sterilization increased the hardness and elasticity of PCL matrices as a result of increased crystallinity of the polymer. Plasma treatment was able to significantly enhance water absorption to otherwise hydrophobic PCL/CAM matrix and had tremendous impact on its drug release kinetics as the drug was instantly released from otherwise prolonged release formulation.

Orthogonally "Clickable" Biodegradable Nanofibers: Tailoring Biomaterials for Specific Protein Immobilization

Multifunctionalizable polymeric nanofibers can be tailored for various biomedical applications by selective conjugation of small molecules and bioactive ligands. This study reports the design, synthesis, and application of novel biodegradable polyester-based nanofibers bearing metal-free "clickable" handles. Polylactide-based polymers were synthesized using organo-catalyzed ring-opening polymerization to contain "clickable" chain-end functional groups that specifically react through radical or nucleophilic thiol-ene reactions. A furan-protected maleimide-containing hydroxyl-bearing initiator yielded polymers containing strained oxanorbornene unit at their chain end. In addition, postpolymerization thermal treatment provides maleimide end group-containing polymers. Solution electrospinning method was utilized to obtain bead-free nanofibers. Efficient conjugation on these nanofibers was demonstrated using metal-free conjugation reactions. It was observed that polylactide nanofibers undergo extensive biofouling, which limits their possible utilization for specific biomolecular immobilization. To alleviate this problem, polymers were modified to contain two orthogonally reactive functional groups, namely, the oxanorbornene unit and an azide group at their chain ends. The former reactive handle was used for conjugation of poly(ethylene glycol) chains to impart hydrophilicity and thus an antibiofouling ability, whereas the azide group undergoes strain-promoted azide-alkyne cycloaddition to install a protein-binding ligand such as biotin. These nanofibers were able to specifically immobilize the protein streptavidin with minimal nonspecific adsorption.

Sintered electrospun polycaprolactone for controlled model drug delivery

Electrospinning has been used widely for drug delivery applications due to its versatility and ease of modification of spun fiber properties. Net drug loading and release is typically limited by the inherent surface-area of the sample. In a relatively novel approach, sintering of electrospun fiber was used to create a capsule favoring long-term delivery. We showed that electrospun polycaprolactone (PCL) retained its initial morphology out to 1042 days of in vitro exposure, illustrating its potential for extended performance. Sintering decreased the electrospun pore size by 10- and 28-fold following 56 and 57 °C exposures, respectively. At 58 and 59 °C, the PCL capsules lost all apparent surface porosity, but entrapped pores were observed in the 58 °C cross-section. The use of Rhodamine B (RhB, 479.02 g mol^-1), Rose Bengal (RB, 1017.64 g mol^-1) and albumin-fluorescein isothiocyanate conjugate from bovine serum (BSA-FITC, ~66,000 g mol^-1) as model compounds demonstrated that release (RhB > RB ≫ BSA-FITC) is controlled both by molecular weight and available porosity. Interestingly, the ranking of release following sintering was 57 > 56 > 59 > 58 °C; COMSOL simulations explored the effects of capsule wall thickness and porosity on release rate. It was hypothesized that model drug adsorption on the available fiber surface-area (57 versus 56 °C) and entrapped porosity (59 versus 58 °C) could have also attributed to the observed ranking of release rates. While the 56 and 57 °C exposures allowed the bulk of the release to occur in <1 day, the capsules sintered at 58 and 59 °C exhibited release that continued after 12 days of exposure.

Magnetic-Plasmonic Heterodimer Nanoparticles: Designing Contemporarily Features for Emerging Biomedical Diagnosis and Treatments

Magnetic-plasmonic heterodimer nanostructures synergistically present excellent magnetic and plasmonic characteristics in a unique platform as a multipurpose medium for recently invented biomedical applications, such as magnetic hyperthermia, photothermal therapy, drug delivery, bioimaging, and biosensing. In this review, we briefly outline the less-known aspects of heterodimers, including electronic composition, interfacial morphology, critical properties, and present concrete examples of recent progress in synthesis and applications. With a focus on emerging features and performance of heterodimers in biomedical applications, this review provides a comprehensive perspective of novel achievements and suggests a fruitful framework for future research.

Electrospun Polylactic Acid Based Nanofibers for Biomedical Applications

Electrospinning technique has excellent advantages such as tunable functionality, thin fibers with large surface areas, ease of processing and good physical properties. Electrospinning provides wide usage area with these advantages in biomedical applications. Polylactic acid (PLA) is a biodegradable and biocompatible polymer, so it can be used in various biomedical applications. PLA can be easily electrospun from solution by using different kinds of conventional solvents. Electrospun PLA based nanofibers are used in many biomedical applications such as drug delivery, scaffold for tissue engineering, dressings for wound healing, dental applications etc. This review focuses on electrospun PLA based nanofibers used in biomedical applications in recent years. Future perspectives of electrospun PLA based fibers are also discussed in the last part.

Polyelectrolyte-Stabilised Magnetic-Plasmonic Nanocomposites

In this work, new magnetic-plasmonic nanocomposites have been developed through the use of two complementary polyelectrolytes⁻polystyrene sulfonate (PSS) and poly(allylamine hydrochloride) (PAH). PSS, a negatively charged polyelectrolyte, was utilized as a stabiliser for magnetite nanoparticles, and PAH, a positively charged polyelectrolyte, was used to stabilize gold nanoparticles. The combination of these two entities resulted in a magnetic-plasmonic nanocomposite that is highly reproducible and scalable. This approach was found to work for a variety of PSS concentrations. The produced magnetic-plasmonic nanomaterials have been characterized by vibrational sample magnetometry (VSM), transmission electron microscopy (TEM) and UV-Vis spectroscopy. These nanocomposite materials have the potential to be used in a variety of biological applications including bioseparation and biosensing.

Porous nanofibrous scaffold incorporated with S1P loaded mesoporous silica nanoparticles and BMP-2 encapsulated PLGA microspheres for enhancing angiogenesis and osteogenesis

Repair of bone defects remains a major clinical challenge due to inadequate or abnormal vascularization in bone substitutes, which commonly leads to inferior bone formation or bone nonunion. Therefore, healing of bone defects requires the coordinated processes of angiogenesis and osteogenesis. In this study, sphingosine-1-phosphate (S1P) was initially loaded into mesoporous silica nanoparticles (MSNs) to form angiogenic microcarriers, which were subsequently embedded into porous nanofibrous poly-l-lactide (PLLA) scaffolds during a thermally induced phase separation (TIPS) process, while bone morphogenetic protein-2 (BMP-2) was encapsulated into poly(lactic-co-glycolic acid) (PLGA) microspheres to obtain osteogenic microcarriers, which were then integrated onto a MSNs/PLLA nanofibrous scaffold by a post seeding method. The osteogenic and angiogenic activities of the resulting dual-bioactive factor containing scaffolds were evaluated both in vitro and in vivo. The simulated drug release studies indicated that both bioactive factors will be released simultaneously and continuously from the fabricated composite scaffold. Moreover, the ectopic bone formation results showed that the sustained release of S1P and BMP-2 from the composite scaffold resulted in a synergistic effect on blood vessel formation and bone regeneration. Taken together, the results showed the promising application of the dual-bioactive factor loaded nanofibrous scaffold for enhanced bone regeneration.

Fabrication of heterogeneous porous bilayered nanofibrous vascular grafts by two-step phase separation technique

Innterconnected porous architecture is critical for tissue engineering scaffold as well as biomimetic nanofibrous structure. In addition, a paradigm shift is recently taking place in the scaffold design from homogeneous porous scaffold to heterogeneous porous scaffold for the complex tissues. In this study, a versatile and simple one-pot method, dual phase separation, is developed to fabricate macroporous nanofibrous scaffold by phase separating the mixture solutions of immiscible polymer blends without using porogens. The macropores in the scaffold are interconnected, and their size can be tuned by the polymer blend ratio. Moreover, benefiting from the easy operation of dual phase separation technique, an innovative, versatile and facile two-step phase separation method is developed to fabricate heterogeneous porous layered nanofibrous scaffolds with different shapes, such as bilayered tubular scaffold and tri-layered cylindrical scaffold. The bilayered tubular nanofibrous scaffold composed of poly(l-lactic acid) (PLLA)/poly(l-lactide-co-ε-caprolactone) (PLCL) microporous inner layer and PLLA/poly(ε-caprolactone) (PCL) macroporous outer layer matches simultaneously the functional growth of endothelial cells (ECs) and smooth muscle cells (SMCs), and shows the favorable performance for potential small diameter blood vessel application. Therefore, this study provides the novel and facile strategies to fabricate macroporous nanofibrous scaffold and heterogeneous porous layered nanofibrous scaffold for tissue engineering applications.

STATEMENT OF SIGNIFICANCE

The fabrication of porous tissue engineering scaffold made of non-water-soluble polymer commonly requires the use of porogen materials. This is complex and time-consuming, resulting in greater difficulty to prepare heterogeneous porous layered scaffold for multifunctional tissues repair, such as blood vessel and osteochondral tissue. Herein, a novel, versatile and simple one-pot dual phase separation technique is developed for the first time to fabricate porous scaffold without using porogens. Simultaneously, it also endows the resultant scaffold with the biomimetic nanofibrous architecture. Based on the easy operation of this dual phase separation technique, a facile two-step phase separation method is also put forward for the first time and applied in fabricating heterogeneous porous layered nanofibrous scaffold for tissue engineering applications.

Dual temperature and pH responsive nanofiber formulations prepared by electrospinning

We report a dual-responsive drug delivery system prepared by electrospinning. Blend fibers of poly(N-vinylcaprolactam) (PNVCL) and ethyl cellulose (EC) were first prepared, with the aim of developing thermoresponsive sustained release formulations. Eudragit L100-based fibers were then generated to yield pH-sensitive materials. Attempts to produce three-polymer fibers of EC, PNVCL and Eudragit were unsuccessful, and therefore hybrid mats containing two fiber populations (one made of PNVCL/EC, one comprising Eudragit) were instead fabricated by twin-jet electrospinning. Analogous drug-loaded versions of all the formulations were also prepared containing ketoprofen (KET). The fibers were largely smooth and homogeneous, and the addition of KET did not affect their morphology. The PNVCL-containing fiber mats changed from being hydrophilic to hydrophobic when the temperature was increased through the lower critical solution temperature of 33 °C. In vitro drug release profiles showed that the hybrid fiber mats were able to combine the properties of the three polymers, exhibiting both pH-sensitive and thermosensitive properties with sustained release. In addition, they were found to be nontoxic and suitable for cell growth. This study therefore demonstrates that PNVCL/EC/KET-Eudragit/KET multicomponent fiber mats comprise effective and biocompatible materials for targeted drug delivery.

Fabrication of curcumin-loaded mesoporous silica incorporated polyvinyl pyrrolidone nanofibers for rapid hemostasis and antibacterial treatment

A new hemostasis material composed of curcumin-loaded mesoporous silica and polyvinyl pyrrolidone nanofibers with rapid hemostasis and antibacterial ability.

Current advances in electrospun gelatin-based scaffolds for tissue engineering applications

The development of biomimetic highly-porous scaffolds is essential for successful tissue engineering. Electrospun nanofibers are highly versatile platforms for a broad range of applications in different research areas. In the biomedical field, micro/nanoscale fibrous structures have gained great interest for wound dressings, drug delivery systems, soft and hard-tissue engineering scaffolds, enzyme immobilization, among other healthcare applications. In this mini-review, electrospun gelatin-based scaffolds for a variety of tissue engineering applications, such as bone, cartilage, skin, nerve, and ocular and vascular tissue engineering, are reviewed and discussed. Gelatin blends with natural or synthetic polymers exhibit physicochemical, biomechanical, and biocompatibility properties very attractive for scaffolding. Current advances and challenges on this research field are presented.

Pigmented Silk Nanofibrous Composite for Skeletal Muscle Tissue Engineering

Skeletal muscle tissue engineering (SMTE) employs designed biomaterial scaffolds for promoting myogenic differentiation of myoblasts to functional myotubes. Oxidative stress plays a significant role in the biocompatibility of biomaterials as well as in the fate of myoblasts during myogenesis and is also associated with pathological conditions such as myotonic dystrophy. The inherent electrical excitability of muscle cells inspired the use of electroactive scaffolds for SMTE. Conducting polymers attracted the attention of researchers for their use in muscle tissue engineering. However, poor biocompatibility, biodegradability and development of oxidative stress associated immunogenic response limits the extensive use of synthetic conducting polymers for SMTE. In order to address the limitations of synthetic polymers, intrinsically electroactive and antioxidant silk fibroin/melanin composite films and electrospun fiber mats were fabricated and evaluated as scaffolds for promoting myogenesis in vitro. Melanin incorporation modulated the thermal stability, electrical conductivity of scaffolds, fiber alignment in electrospun mats and imparted good antioxidant properties to the scaffolds. The composite electrospun scaffolds promoted myoblast assembly and differentiation into uniformly aligned high aspect ratio myotubes. The results highlight the significance of scaffold topography along with conductivity in promoting myogenesis and the potential application of silk nanofibrous composite as electoractive platform for SMTE.

Electrophoretic Deposition of Dexamethasone-Loaded Mesoporous Silica Nanoparticles onto Poly(L-Lactic Acid)/Poly(ε-Caprolactone) Composite Scaffold for Bone Tissue Engineering

The incorporation of microcarriers as drug delivery vehicles into polymeric scaffold for bone regeneration has aroused increasing interest. In this study, the aminated mesoporous silica nanoparticles (MSNs-NH2) were prepared and used as microcarriers for dexamethasone (DEX) loading. Poly(l-lactic acid)/poly(ε-caprolactone) (PLLA/PCL) nanofibrous scaffold was fabricated via thermally induced phase separation (TIPS) and served as template, onto which the drug-loaded MSNs-NH2 nanoparticles were deposited by electrophoretic deposition (EPD). The physicochemical and release properties of the prepared scaffolds (DEX@MSNs-NH2/PLLA/PCL) were examined, and their osteogenic activities were also evaluated through in vitro and in vivo studies. The release of DEX from the scaffolds revealed an initial rapid release followed by a slower and sustained one. The in vitro results indicated that the DEX@MSNs-NH2/PLLA/PCL scaffold exhibited good biocompatibility to rat bone marrow-derived mesenchymal stem cells (BMSCs). Also, BMSCs cultured on the DEX@MSNs-NH2/PLLA/PCL scaffold exhibited a higher degree of osteogenic differentiation than those cultured on PLLA/PCL and MSNs-NH2/PLLA/PCL scaffolds, in terms of alkaline phosphatase (ALP) activity, mineralized matrix formation, and osteocalcin (OCN) expression. Furthermore, the in vivo results in a calvarial defect model of Sprague-Dawley (SD) rats demonstrated that the DEX@MSNs-NH2/PLLA/PCL scaffold could significantly promote calvarial defect healing compared with the PLLA/PCL scaffold. Thus, the EPD technique provides a convenient way to incorporate osteogenic agents-containing microcarriers to polymer scaffold, and thus, prepared composite scaffold could be a potential candidate for bone tissue engineering application due to its capacity for delivery of osteogenic agents.

Fabrication and characterization of a collagen coated electrospun poly(3-hydroxybutyric acid)–gelatin nanofibrous scaffold as a soft bio-mimetic material for skin tissue engineering applications

The collagen coated nanofibrous scaffold mimics the function of the extra cellular matrix with good biocompatibility, cell adhesion, cell proliferation and aids to provide as a promising tool in skin tissue engineering application.

Electrospinning of natural polymers for advanced wound care: towards responsive and adaptive dressings

Nanofibrous dressings produced by electrospinning proteins and polysaccharides are highly promising candidates in promoting wound healing and skin regeneration.

BMP-2 Derived Peptide and Dexamethasone Incorporated Mesoporous Silica Nanoparticles for Enhanced Osteogenic Differentiation of Bone Mesenchymal Stem Cells

Bone morphogenetic protein-2 (BMP-2), a growth factor that induces osteoblast differentiation and promotes bone regeneration, has been extensively investigated in bone tissue engineering. The peptides of bioactive domains, corresponding to residues 73-92 of BMP-2 become an alternative to reduce adverse side effects caused by the use of high doses of BMP-2 protein. In this study, BMP-2 peptide functionalized mesoporous silica nanoparticles (MSNs-pep) were synthesized by covalently grafting BMP-2 peptide on the surface of nanoparticles via an aminosilane linker, and dexamethasone (DEX) was then loaded into the channel of MSNs to construct nanoparticulate osteogenic delivery systems (DEX@MSNs-pep). The in vitro cell viability of MSNs-pep was tested with bone mesenchymal stem cells (BMSCs) exposure to different particle concentrations, revealing that the functionalized MSNs had better cytocompatibility than their bare counterparts, and the cellular uptake efficiency of MSNs-pep was remarkably larger than that of bare MSNs. The in vitro results also show that the MSNs-pep promoted osteogenic differentiation of BMSCs in terms of the levels of alkaline phosphatase (ALP) activity, calcium deposition, and expression of bone-related protein. Moreover, the osteogenic differentiation of BMSCs can be further enhanced by incorporating of DEX into MSNs-pep. After intramuscular implantation in rats for 3 weeks, the computed tomography (CT) images and histological examination indicate that this nanoparticulate osteogenic delivery system induces effective osteoblast differentiation and bone regeneration in vivo. Collectively, the BMP-2 peptide and DEX incorporated MSNs can act synergistically to enhance osteogenic differentiation of BMSCs, which have potential applications in bone tissue engineering.

Thin and ordered hydrogel films deposited through electrospinning technique; a simple and efficient support for organic bilayers

Thermal behavior of Dipalmitoylphosphatidylcholine (DPPC) bilayers deposited over hydrogel fibers was examined. Thus, membrane stability, water absorption-release, phase transitions and phase transition temperatures were studied through different methods during heating cycles. Hydrogel films were realized using an oligomer mixture (HEMA-PEGDA575/photo-initiator) with adequate viscosity. Then, the fibers were deposited over silicon wafers (hydrophilic substrate) through electrospinning technique using four different voltages: 15, 20, 25 and 30 kV. The films were then exposed to UV light, favoring polymer chain crosslinking and interactions between hydrogel and substrate. For samples deposited at 20 and 25 kV, hierarchical wrinkle folds were observed at surface level, their arrangement distribution depends directly on thickness and associated point defects. DPPC bilayers were then placed over hydrogel scaffold using Langmuir-Blodgett technique. Field emission scanning electron microscopy (FE-SEM) analysis were used to investigate sample surface, micrographies show homogeneous layer formation with chain polymer order/disorder related to applied voltage during hydrogel deposition process, among other parameters. According to the results obtained, it is possible to conclude that the oligomer deposited at 20 kV produce thin homogenous films (~40 nm) with enhanced ability to absorb water and release it in a controlled way during heating cycles. These scaffold properties confer to DPPC membrane thermal stability, which allow an easy detection of phase(s) and phase transitions. Thermal behavior was also studied via Atomic Force Microscopy (roughness analysis). Contact angle measurements corroborate system wettability, supporting the theory that hydrogel thin films act as DPPC membrane enhancers for thermal stability against external stimuli.

A biomimetic 3D microtubule-orientated poly(lactide-co-glycolide) scaffold with interconnected pores for tissue engineering

An ideal tissue engineering scaffold should imitate physical and biochemical cues of natural extracellular matrix and have interconnected porous structures with high porosity to provide adequate space for cell seeding, growth and proliferation, as well as nutrient delivery and metabolized product elimination. In this study, we examined the feasibility of fabricating microtubule-orientated poly(lactide-co-glycolide) (PLGA) scaffolds with interconnected pores (denoted as MOIP-PLGA) by an improved thermal-induced phase separation technique. We successfully constructed MOIP-PLGA using 1,4-dioxane as the first solvent and benzene or water with lower freezing point as the second solvent. Especially, when water was used, the MOIP-PLGA had higher porosity and it could guide rabbit aortic smooth muscle cells (SMCs) to better grow along the microtubule direction of the scaffold. Comparing with microtubule-orientated scaffold without interconnected pores (denoted as MONIP-PLGA), the proliferation and viability of SMCs cultured on MOIP-PLGA were higher. Moreover, basic fibroblast growth factor could be effectively bound on MOIP-PLGA by a plasma treatment technique and the growth factor could be slowly released in vitro, maintaining bioactivity.

Mesoporous silica-layered biopolymer hybrid nanofibrous scaffold: a novel nanobiomatrix platform for therapeutics delivery and bone regeneration

Nanoscale scaffolds that characterize high bioactivity and the ability to deliver biomolecules provide a 3D microenvironment that controls and stimulates desired cellular responses and subsequent tissue reaction. Herein novel nanofibrous hybrid scaffolds of polycaprolactone shelled with mesoporous silica (PCL@MS) were developed. In this hybrid system, the silica shell provides an active biointerface, while the 3D nanoscale fibrous structure provides cell-stimulating matrix cues suitable for bone regeneration. The electrospun PCL nanofibers were coated with MS at controlled thicknesses via a sol-gel approach. The MS shell improved surface wettability and ionic reactions, involving substantial formation of bone-like mineral apatite in body-simulated medium. The MS-layered hybrid nanofibers showed a significant improvement in mechanical properties, in terms of both tensile strength and elastic modulus, as well as in nanomechanical surface behavior, which is favorable for hard tissue repair. Attachment, growth, and proliferation of rat mesenchymal stem cells were significantly improved on the hybrid scaffolds, and their osteogenic differentiation and subsequent mineralization were highly up-regulated by the hybrid scaffolds. Furthermore, the mesoporous surface of the hybrid scaffolds enabled the loading of a series of bioactive molecules, including small drugs and proteins at high levels. The release of these molecules was sustainable over a long-term period, indicating the capability of the hybrid scaffolds to deliver therapeutic molecules. Taken together, the multifunctional hybrid nanofibrous scaffolds are considered to be promising therapeutic platforms for stimulating stem cells and for the repair and regeneration of bone.