Comparison between molecular dynamics potentials for simulation of graphene-based nanomaterials for biomedical applications

OBJECTIVE

This article provides a substantial review of recent research and comparison on molecular dynamics potentials to determine which are most suitable for simulating the phenomena in graphene-based nanomaterials (GBNs).

SIGNIFICANCE

GBNs gain significant attention due to their remarkable properties and potential applications, notably in nanomedicine. However, the physical and chemical characteristics toward macromolecules that justify their nanomedical applications are not yet fully understood. The molecular interaction through molecular dynamic simulation offers the benefits for simulating inorganic molecules like GBNs, with necessary adjustments to account for physical and chemical interactions, or thermodynamic conditions.

METHOD

In this review, we explore various molecular dynamics potentials (force fields) used to simulate interactions and phenomena in graphene-based nanomaterials. Additionally, we offer a brief overview of the benefits and drawbacks of each force fields that available for analysis to assess which one is suitable to study the molecular interaction of graphene-based nanomaterials.

RESULT

We identify and compare various molecular dynamics potentials that available for analyzing GBNs, providing insights into their suitability for simulating specific phenomena in graphene-based nanomaterials. The specification of each force fields and its purpose can be used for further application of molecular dynamics simulation on GBNs.

CONCLUSION

GBNs hold significant promise for applications like nanomedicine, but their physical and chemical properties must be thoroughly studied for safe clinical use. Molecular dynamics simulations, using either reactive or non-reactive MD potentials depending on the expected chemical changes, are essential for accurately modeling these properties, requiring careful selection based on the specific application.

Graphene-based nanomaterials applications for agricultural and food sector

In the past decade, graphene-based nanomaterials (GBNs) have been considerably investigated in agriculture due to their exceptionally enriched physicochemical properties. Productivity in the agricultural sector relies significantly on agrochemicals. However, conventional systems suffer from a lack of application efficiency, resulting in environmental pollution and associated problems. Due to high surface area, easy functionalization, high chemical stability, biocompatibility, and ability to adhere to biological structures, GBNs become a promising candidate for agro-delivery carriers. A comprehensive review on developments of GBNs for pesticide delivery, nutrient delivery, food packaging and preservation, and their impacts on plant growth and development are missing in the literature. To address this, here we presented a detailed review on the material design, agrochemicals loading, release or diffusion kinetics, in-vivo applications, and effects of GBNs on plants. The GBNs found to improve the efficacy of existing agrochemicals and food preservatives, aiming to decrease the overall burden of these substances. The incorporation of GBNs in biocompatible and biodegradable polymers is reported to improve their oxygen barrier and mechanical properties for food packaging applications, targeting to reduce the use of petroleum-derived polymers based current food packaging materials, which leads to serious environmental impacts. In the context of plant nanobionics, GBNs has been found to boost the plant growth at low concentrations. Here, recommendations for future research have been deliberated, drawing reference from the relevant area to gain a deeper understanding of the underlying science, and to develop better delivery and packaging applications approaches. Additionally, discussions on recommendations regarding the safe concentration of GBNs for plant nanobionics are presented to facilitate their secure and effective utilization.

Enhancing Membrane Materials for Efficient Li Recycling and Recovery

Rapid uptake of lithium-centric technology, e.g., electric vehicles and large-scale energy storage, is increasing the demand for efficient technologies for lithium extraction from aqueous sources. Among various lithium-extraction technologies, membrane processes hold great promise due to energy efficiency and flexible operation in a continuous process with potential commercial viability. However, membrane separators face challenges such as the extraction efficiency due to the limited selectivity toward lithium relative to other species. Low selectivity can be ascribed to the uncontrollable selective channels and inefficient exclusion functions. However, recent selectivity enhancements for other membrane applications, such as in gas separation and energy storage, suggest that this may also be possible for lithium extraction. This review article focuses on the innovations in the membrane chemistries based on rational design following separation principles and unveiling the theories behind enhanced selectivity. Furthermore, recent progress in membrane-based lithium extraction technologies is summarized with the emphasis on inorganic, organic, and composite materials. The challenges and opportunities for developing the next generation of selective membranes for lithium recovery are also pointed out.

Hourglass-shaped europium cluster-based secondary building unit in metal-organic framework for photocatalytic wastewater purification and sterilization via enhanced reactive oxygen species production

A large number of diseases caused by water pollution have become a global public health issue, and the development and construction of innovative and efficient photocatalytic systems for water remediation is vital to improve water quality and prevent bacteria-induced diseases. Herein, a europium-based metal-organic framework (Eu-MOF) was self-assembled with complex hourglass-shaped Eu9 clusters as secondary building units (SBUs), achieving excellent photoinduced reactive oxygen species (ROS) generation ability. Moreover, Eu-MOF can quickly and efficiently degrade organic dyes and kill a variety of bacteria under low-power light irradiation conditions. Time-dependent scanning electron microscopy (SEM) and infrared absorption spectroscopy (IR) were used for the first time to track the formation process of complex clusters into cluster-based MOFs, and the gradual transformation of amorphous intermediates into crystalline Eu-MOF was clearly tracked. Electrochemical impedance spectroscopy (EIS) results showed that Eu-MOF has a smaller semicircle than the organic ligands, demonstrating its excellent charge separation ability. The excellent ROS generation capacity of Eu-MOF was jointly demonstrated by electron paramagnetic resonance (EPR) spectroscopy and the results obtained using the 2',7'-dichlorodihydrofluorescein (DCFH) indicator. More importantly, using low-power (60 mW/cm2) Xe lamp irradiation, Eu-MOF can almost completely degrade 10 mg/L aqueous solutions of rhodamine B (RhB), methylene blue (MB), and crystal violet (CV) within 30, 90, and 120 min, respectively. In addition, the excellent light-induced ROS production ability of Eu-MOF contributes to its significant cell killing and antibacterial effects. Under light irradiation conditions, Eu-MOF can effectively kill Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), with average inhibition zone sizes of 2.54 ± 0.17 and 2.56 ± 0.08 cm, respectively. This work opens up new horizons for the build of efficient photocatalytic systems based on lanthanide porous materials and promotes the progress of lanthanide MOFs (Ln-MOFs) crystal engineering.

Nanoparticle-Doped Antibacterial and Antifungal Coatings

Antimicrobial polymeric coatings rely not only on their surface functionalities but also on nanoparticles (NPs). Antimicrobial coatings gain their properties from the addition of NPs into a polymeric matrix. NPs that have been used include metal-based NPs, metal oxide NPs, carbon-based nanomaterials, and organic NPs. Copper NPs and silver NPs exhibit antibacterial and antifungal properties. So, when present in coatings, they will release metal ions with the combined effect of having bacteriostatic/bactericidal properties, preventing the growth of pathogens on surfaces covered by these nano-enhanced films. In addition, metal oxide NPs such as titanium dioxide NPs (TiO2 NPs) and zinc oxide NPs (ZnONPs) are used as NPs in antimicrobial polymeric coatings. Under UV irradiation, these NPs show photocatalytic properties that lead to the production of reactive oxygen species (ROS) when exposed to UV radiation. After various forms of nano-carbon materials were successfully developed over the past decade, they and their derivatives from graphite/nanotubes, and composite sheets have been receiving more attention because they share an extremely large surface area, excellent mechanical strength, etc. These NPs not only show the ability to cause oxidative stress but also have the ability to release antimicrobial chemicals under control, resulting in long-lasting antibacterial action. The effectiveness and life spans of the antifouling performance of a variety of polymeric materials have been improved by adding nano-sized particles to those coatings.

Advanced mechanisms and applications of microwave-assisted synthesis of carbon-based materials: a brief review

The interaction of microwave radiation with carbon-based materials induces rapid, instantaneous heating. When combined with the plasma excitation capabilities of microwaves, this property presents novel avenues for synthesizing carbon-based materials that require high temperatures and catalytic activity. This review investigates the response of carbon-based materials to microwave radiation, analyzes the dielectric loss mechanism responsible for heat generation, and details the microwave plasma excitation mechanisms employed in the synthesis and processing of carbon-based materials. Furthermore, the structure of microwave reactors is discussed, followed by a discussion of their diverse applications in both laboratory and industrial settings. Lastly, the review addresses the challenges associated with the practical implementation of microwave technology and explores future development prospects, with a particular focus on the application of microwaves in carbon-based material synthesis.

A Lifetime of Catalytic Micro-/Nanomotors

Microscopic and nanoscopic motors, often referred to as micro-/nanomotors, are autonomous devices capable of converting chemical energy from their surroundings into mechanical motion or forces necessary for propulsion. These devices draw inspiration from natural biomolecular motor proteins, and in recent years, synthetic micro-/nanomotors have attracted significant attention. Among these, catalytic micro-/nanomotors have emerged as a prominent area of research. Despite considerable progress in their design and functionality, several obstacles remain, especially regarding the development of biocompatible materials and fuels, the integration of intelligent control systems, and the translation of these motors into practical applications. Thus, a comprehensive understanding of the current advancements in catalytic micro-/nanomotors is critical. This review aims to provide an in-depth overview of their fabrication techniques, propulsion mechanisms, key influencing factors, control methodologies, and potential applications. Furthermore, we examine their physical and hydrodynamic properties in fluidic environments to optimize propulsion efficiency. Lastly, we evaluate their biosafety and biocompatibility to facilitate their use in biological systems. The review also addresses key challenges and proposes potential solutions to advance their practical deployment.

High-Efficiency Broad-Spectrum Antibacterial Activity of Chitosan/Zinc Ion/Polyoxometalate Composite Films for Water Treatment

The development of multifunctional films with rapidly killing microorganisms and adsorbing residual antibiotics in wastewater remains a challenging endeavor. In this work, the chitosan/zinc ion/polyoxometalate (CS/Zn2+/POM) multifunctional films were prepared by the freeze-drying method using chitosan, ZnO, and POM. Notably, the CS/Zn2+/POM films exhibited excellent bactericidal properties against Gram-positive/negative bacterial strains including Staphylococcus aureus (S. aureus, 99.80%), Escherichia coli (E. coli, 99.82%), and drug-resistant E. coli bacterial strains (kanamycin-resistant E. coli, 87.76% and ampicillin-resistant E. coli, 99.71%). This may be due to the chelation of Zn2+ with CS disrupting the cell membrane and bringing POM into direct contact with bacteria, leading to bacterial death. In addition, the CS/Zn2+/POM films showed good adsorption performance to a tetracycline (TC) solution (adsorption rate 75.2%). Further studies showed that the main process of tetracycline removal by CS/Zn2+/POM films was controlled by a physical adsorption. This POM-based film material has an important potential for the synthesis of broad-spectrum antimicrobial materials for the removal of residual antibiotics from water pollutants such as tetracycline.

A Study on the Effect of Graphene Oxide on Geotechnical Properties of Soil

Edge-oxidized graphene oxide (EOGO) is a nano-sized material that is chemically stable and easily mixed with water due to its hydrophilic properties; thus, it has been used in various engineering fields, particularly for the reinforcement of building and construction materials. In this study, the effect of EOGO in soil reinforcement was investigated. When mixed with soil, it affects the mechanical properties of the soil-GO mixture. Various amounts of the GO (0%, 0.02%, 0.06%, 0.1%) were added into the sand-clay mixture, and their geotechnical properties were evaluated via multiple laboratories testing methods, including a standard Proctor test, direct shear test, compressibility test, and contact angle measurement. The experimental results show that with the addition of EOGO in soil of up to 0.06% EOGO, the compressibility decreases, the shear strength increases, and the maximum dry density (after compaction) increases.

Enhanced Stretchable 2D Metal-Graphene Membranes with Superior Mechanical Properties for Sieving Lithium from Brine

Designing mechanically robust, 2D membranes with elastic properties is crucial for advancing separation technologies, particularly in demanding environments such as saline lakes. Here, an innovative approach, the synthesis of silver nanosheets within graphene oxide (GO) membranes to form a 2D silver-graphene heterojunction, is introduced. This membrane exhibits exceptional mechanical strength (stress tolerance of 4.26 MPa and strain capacity of 123.03%), attributed to the reinforcing effect and ductility of silver nanosheets interacting synergistically with GO layers. Notably, the membrane demonstrates high selectivity for lithium ions in Salt Lake brine (Li⁺/Mg2⁺ ≈ 29.0, Na⁺/Mg2⁺ ≈ 183.3). Through dynamic stretching, the membrane enables precise modulation of ion permeability and selectivity, highlighting its versatility and practicality in complex separation processes. This study marks a significant advancement in membrane design, underscoring its potential in addressing challenges posed by diverse industrial applications, particularly in saline environments.

Pharmaceutical Removal with Photocatalytically Active Nanocomposite Membranes

The advancement of pharmaceutical science has resulted in the development of numerous tailor-made compounds, i.e., pharmaceuticals, tuned for specific drug targets. These compounds are often characterized by their low biodegradability and are commonly excreted to a certain extent unchanged from the human body. Due to their low biodegradability, these compounds represent a significant challenge to wastewater treatment plants. Often, these compounds end up in effluents in the environment. With the advancement of membrane technologies and advanced oxidation processes, photocatalysis in particular, a synergistic approach between the two was recognized and embraced. These hybrid advanced water treatment processes are the focus of this review, specifically the removal of pharmaceuticals from water using a combination of a photocatalyst and pressure membrane process, such as reverse osmosis or nanofiltration employing photocatalytic nanocomposite membranes.

Heavy-Metal Ions Removal and Iodine Capture by Terpyridine Covalent Organic Frameworks

Porous materials are excellent candidates for water remediation in environmental issues. However, it is still a key challenge to design efficient adsorbents for rapid water purification from various heavy metal ions-contaminated wastewater in one step. Here, two robust nitrogen-rich covalent organic frameworks (COFs) bearing terpyridine units on the pore walls by a "bottom-up" strategy are reported. Benefitting from the strong chelation interaction between the terpyridine units and various heavy metal ions, these two terpyridine COFs show excellent removal efficiency and capability for Pb2+, Hg2+, Cu2+, Ag+, Cd2+, Ni2+, and Cr3+ from water. These COFs are shown to remove such heavy metal ions with >90% of contents at one time after the aqueous metal ions mixture is passed through the COF filter. The nitrogen-rich features of the COFs also endow them with the capability of capturing iodine vapors, offering the terpyridine COFs the potential for environmental remediation applications.

Synthesis of chiral graphene structures and their comprehensive applications: a critical review

From a molecular viewpoint, chirality is a crucial factor in biological processes. Enantiomers of a molecule have identical chemical and physical properties, but chiral molecules found in species exist in one enantiomer form throughout life, growth, and evolution. Chiral graphene materials have considerable potential for application in various domains because of their unique structural framework, properties, and controlled synthesis, including chiral creation, segregation, and transmission. This review article provides an in-depth analysis of the synthesis of chiral graphene materials reported over the past decade, including chiral nanoribbons, chiral tunneling, chiral dichroism, chiral recognition, and chiral transfer. The second segment focuses on the diverse applications of chiral graphene in biological engineering, electrochemical sensors, and photodetectors. Finally, we discuss research challenges and potential future uses, along with probable outcomes.

Biomass-Derived Cellulose Acetate Membranes Modified with TiO2/Graphene Oxide for Oil-In-Water Emulsion Treatment

Considering the environmental impact and health risks caused by oily wastewater in the petrochemical industry, it is crucial to develop more efficient separation techniques than traditional methods, such as membrane separation, for treating stable emulsions enriched with natural surfactants. This study investigated the preparation of dense cellulose acetate membranes from a low-cost biomass precursor (Luffa cylindrica) and their modification with graphene oxide (GO) and TiO2 nanoparticles, aiming to obtain a polymeric nanocomposite with good flux characteristics and selectivity for the treatment of oil/water emulsions. The materials obtained were characterized using techniques such as X-ray diffraction, nuclear magnetic resonance spectroscopy, infrared absorption spectroscopy, along with optical and scanning electron microscopy, among others. The membranes were prepared by the casting technique and modified with the above-mentioned nanostructured materials. Flux analyses with petroleum emulsion revealed that membranes modified with GO and TiO2 nanoparticles showed significant improvements in antifouling resistance compared to unmodified membranes. These enhanced properties highlight the potential of modified cellulose acetate membranes for application in industrial wastewater treatment.

A First Principles Study of Lithium Adsorption in Nanoporous Graphene

Recently, nanoporous graphene has attracted great interest in the scientific community. It possesses nano-sized holes; thus, it has a highly accessible surface area for lithium adsorption for energy storage applications. Defective graphene has been extensively studied. However, the lithium adsorption mechanism of nanoporous graphene is not clearly understood yet. Here, we present theoretical investigations on the lithium-ion adsorption mechanism in nanoporous graphene. We perform ab initio electronic structure calculations based on density functional theory. Lithium adsorption in a graphene nanopore is studied and adsorption sites are determined. We also study different lithium-ion distributions in graphene nanopores to determine the best lithium-nanoporous graphene structures for lithium-ion batteries. We show that lithium ions can be adsorbed in a graphene nanopore, even in a single layer of graphene. It is also shown that adding more nanopores to multilayer nanoporous graphene can result in higher Li storage capacity for new-generation lithium-ion batteries.

Heterointerface engineering of MXene: Advanced applications in environmental remediation

Contemporary global industrialization, coupled with the relentless growth of the population, has led to a persistent escalation in the emission and accumulation of various toxic and harmful chemicals in the environment, severely disrupting the ecological balance. The development of efficient environmental cleanup materials is a crucial scientific and technological concern. Since the groundbreaking work on Ti3C2Tx in 2011, there has been a huge growing interest in MXene-based composites developed through heterointerface engineering due to its high surface area, hydrophilicity, eco-friendliness, biocompatibility, easy functionalization, excellent thermal/mechanical properties, metal conductivity and rich electronic density. In the area of environmental remediation, MXene-based composites obtained through heterointerface engineering strategies have the ability to effectively remove and systematically monitor contaminants in comparison to virgin MXene, thanks to the synergistic effects and complementary benefits. Heterointerface engineering strategy increases specific surface area, introduces catalytic sites, constructs heterojunctions/Schottky junctions, and facilitates carrier migration and electron-hole separation. These novel MXene-based composites represent significant advances in MXene research and deserve a comprehensive review. Although several excellent reviews and perspectives on the application of MXene-based composites in environmental remediation have been published, there is still a scarcity of comprehensive and systematic assessments on the reliable data and mechanisms of various MXene-based composite materials for pollutant removal and monitoring. In this focused review, the first part briefly introduces the common preparation strategies and characterization methods of single MXene and MXene-based composites, and the second part details the innovative application of MXene-based composites (involving the amalgamation of MXene with metal oxides, metal sulfide, g-C3N4, layered double hydroxides, metal-organic frameworks, single atom/quantum dots, polymers, etc.) in the field of environmental remediation, including carbon dioxide reduction, nitrogen monoxide and volatile organic compounds removal, antibiotic and heavy metal ions degradation, summarizing the relevant performance and mechanisms. Furthermore, the recent advancements in the utilization of MXene-based composites for the sensing of emerging environmental contaminants (antibiotic and antibiotic resistance genes) are summarized. Finally, an outline of the existing challenges and future prospects on this exciting field was narrated for plausible real-world use. This review will help to inspire the diverse design of MXene-based composites and to advance research related to their application in the environmental sector.

Nanopriming boost seed vigor: Deeper insights into the effect mechanism

Nanopriming, an advanced seed priming technology, is highly praised for its environmental friendliness, safety, and effectiveness in promoting sustainable agriculture. Studies have shown that nanopriming can enhance seed germination by stimulating the expression of aquaporins and increasing amylase production. By applying an appropriate concentration of nanoparticles, seeds can generate reactive oxygen species (ROS), enhance their antioxidant capacity, improve their response to oxidative stress, and enhance their tolerance to both biotic and abiotic stresses. This positive impact extends beyond the seed germination and seedling growth stages, persisting throughout the entire life cycle. This review offers a comprehensive overview of recent research progress in seed priming using various nanoparticles, while also addressing current challenges and future opportunities for sustainable agriculture.

Construction of Pillared-Layer Metal-Organic Frameworks as an All-Visible-Light Switchable Photocatalyst for Aqueous Cr(VI) Reduction

Recently, two-dimensional metal-organic frameworks that are photoactive have shown great potential for efficiently converting solar energy into chemical energy. In this work, we successfully synthesized and designed two M2-MOFs ([Cu(L1)((CH3)2NH)]n (Cu-MOF) and [Zn(L1)(CH3)2NH)]n (Zn-MOF), H2L1 = 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid). Structural analysis suggests that the five-coordinated M(II) ion is surrounded by four oxygen ions from two ligands and one nitrogen atom from one dimethylamine molecule. The ligand spacer acts as a bridge between two SBUs and forms a 2D layer with rhomboid windows. These moieties are arranged in a staggered ABAB pattern, which likely aids in exfoliation. The UV-vis diffuse reflectance spectra (DRS) test shows that when the metal center in the MOF framework is replaced with Cu(II) ions, the light absorption range covers 200-1100 nm, which is much larger than the light absorption range of Zn-MOF. Moreover, the photoelectric current, electrochemical impedance spectra (EIS), and Mott-Schottky tests all indicate that Cu-MOF has better photoelectric properties. When applied to the photocatalytic reduction of Cr(VI), Cu-MOF and Zn-MOF can completely reduce Cr(VI) within 100 min under 450 nm LED light irradiation. Under sunlight irradiation, Cu-MOF can completely reduce Cr(VI) within 40 min, achieving the removal of Cr(VI) ions, which is much faster than the rate of Cr(VI) removal by Zn-MOF.

Algal extracellular polymeric substance compositions drive the binding characteristics, affinity, and phytotoxicity of graphene oxide in water

Graphene oxide (GO, a popular 2D nanomaterial) poses great potential in water treatment arousing considerable attention regarding its fate and risk in aquatic environments. Extracellular polymeric substances (EPS) exist widely in water and play critical roles in biogeochemical processes. However, the influences of complex EPS fractions on the fate and risk of GO remain unknown in water. This study integrates fluorescence excitation-emission matrix-parallel factor, two-dimensional correlation spectroscopy, and biolayer interferometry studies on the binding characteristics and affinity between EPS fractions and GO. The results revealed the preferential binding of fluorescent aromatic protein-like component, fulvic-like component, and non-fluorescent polysaccharide in soluble EPS (S-EPS) and bound EPS (B-EPS) on GO via π-π stacking and electrostatic interaction that contributed to a higher adsorption capacity of S-EPS on GO and weaker affinity than of B-EPS. Moreover, the EPS fractions drive the morphological and structural alterations, and the attenuated colloid stability of GO in water. Notably, GO-EPS induced stronger phytotoxicity (e.g., photosynthetic damage, and membrane lipid remodeling) compared to pristine GO. Metabolic and functional lipid analysis further elucidated the regulation of amino acid, carbohydrate, and lipid metabolism contributed to the persistent phytotoxicity. This work provides insights into the roles and mechanisms of EPS fractions composition in regulating the environmental fate and risk of GO in natural water.

Green synthesis of magnetite iron oxide nanoparticles using Azadirachta indica leaf extract loaded on reduced graphene oxide and degradation of methylene blue

In the current arena, new-generation functional nanomaterials are the key players for smart solutions and applications including environmental decontamination of pollutants. Among the plethora of new-generation nanomaterials, graphene-based nanomaterials and nanocomposites are in the driving seat surpassing their counterparts due to their unique physicochemical characteristics and superior surface chemistry. The purpose of the present research was to synthesize and characterize magnetite iron oxide/reduced graphene oxide nanocomposites (FeNPs/rGO) via a green approach and test its application in the degradation of methylene blue. The modified Hummer's protocol was adopted to synthesize graphene oxide (GO) through a chemical exfoliation approach using a graphitic route. Leaf extract of Azadirachta indica was used as a green reducing agent to reduce GO into reduced graphene oxide (rGO). Then, using the green deposition approach and Azadirachta indica leaf extract, a nanocomposite comprising magnetite iron oxides and reduced graphene oxide i.e., FeNPs/rGO was synthesized. During the synthesis of functionalized FeNPs/rGO, Azadirachta indica leaf extract acted as a reducing, capping, and stabilizing agent. The final synthesized materials were characterized and analyzed using an array of techniques such as scanning electron microscopy (SEM)-energy dispersive X-ray microanalysis (EDX), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction analysis, and UV-visible spectrophotometry. The UV-visible spectrum was used to evaluate the optical characteristics and band gap. Using the FT-IR spectrum, functional groupings were identified in the synthesized graphene-based nanomaterials and nanocomposites. The morphology and elemental analysis of nanomaterials and nanocomposites synthesized via the green deposition process were investigated using SEM-EDX. The GO, rGO, FeNPs, and FeNPs/rGO showed maximum absorption at 232, 265, 395, and 405 nm, respectively. FTIR spectrum showed different functional groups (OH, COOH, C=O), C-O-C) modifying material surfaces. Based on Debye Sherrer's equation, the mean calculated particle size of all synthesized materials was < 100 nm (GO = 60-80, rGO = 90-95, FeNPs = 70-90, Fe/GO = 40-60, and Fe/rGO = 80-85 nm). Graphene-based nanomaterials displayed rough surfaces with clustered and spherical shapes and EDX analysis confirmed the presence of both iron and oxygen in all the nanocomposites. The final nanocomposites produced via the synthetic process degraded approximately 74% of methylene blue. Based on the results, it is plausible to conclude that synthesized FeNPs/rGO nanocomposites can also be used as a potential photocatalyst degrader for other different dye pollutants due to their lower band gap.

Preparation magnetic graphene oxide/diethylenetriamine composite for removal of methylene blue from aqueous solutions

Graphene oxide (GO) and its derivatives have several applications in many areas such as environmental and energy materials, water treatment and biomedical technologies. Because of having various polar groups on its surface, GO is considered as an excellent adsorbent. However, for many applications such as adsorption of pollution from aqueous solutions, chemical functionalization of graphene oxide is often a necessary requirement. In the present study, a new composite from graphene oxide, diethylenetriamine (DETA) and silica coated MnFe2O4 nanoparticles (GO/DETA/MnFe2O4@SiO2) was prepared. The structure, thermal stability and magnetic properties of the composite were studied by FT-IR, XRD, SEM, EDS, VSM and TGA spectroscopic methods. The prepared composite showed magnetic property with a saturation magnetization of 3.0 emu/g. The adsorption properties of GO/DETA/MnFe2O4@SiO2 composite for methylene blue (MB) in aqueous solution were studied using batch method. The effects of important parameters on the surface adsorption process of MB, including pH, contact time, adsorbent dosage and initial dye concentration were investigated. The adsorption isotherm was in accordance with Langmuir model showing surface homogeneity of the adsorbent. According to the Langmuir analysis, the maximum adsorption capacity (qm) of GO/DETA/MnFe2O4@SiO2 composite for MB was found to be 243.91 mg/g. The kinetic studies showed that the adsorption was pseudo first-order process. In addition, the thermodynamic studies indicated the adsorption was spontaneous and endothermic process.

Carbon carrier-based rapid Joule heating technology: a review on the preparation and applications of functional nanomaterials

Compared to conventional heating techniques, the carbon carrier-based rapid Joule heating (CJH) method is a new class of technologies that offer significantly higher heating rates and ultra-high temperatures. Over the past few decades, CJH technology has spawned several techniques with similar principles for different application scenarios, including ultra-fast high temperature sintering (UHS), carbon thermal shock (CTS), and flash Joule heating (FJH), which have been widely used in material preparation research studies. Functional nanomaterials are a popular direction of research today, mainly including nanometallic materials, nanosilica materials, nanoceramic materials and nanocarbon materials. These materials exhibit unique physical, chemical, and biological properties, including a high specific surface area, strength, thermal stability, and biocompatibility, making them ideal for diverse applications across various fields. The CJH method is a remarkable approach to producing functional nanomaterials that has attracted attention for its significant advantages. This paper aims to delve into the fundamental principles of CJH and elucidate the efficient preparation of functional nanomaterials with superior properties using this technique. The paper is organized into three sections, each dedicated to introducing the process and characteristics of CJH technology for the preparation of three distinct material types: carbon-based nanomaterials, inorganic non-metallic materials, and metallic materials. We discuss the distinctions and merits of the CJH method compared to alternative techniques in the preparation of these materials, along with a thorough examination of their properties. Furthermore, the potential applications of these materials are highlighted. In conclusion, this paper concludes with a discussion on the future research trends and development prospects of CJH technology.

Nanomaterials-modified reverse osmosis membranes: a comprehensive review

Because of its great efficiency and widespread application, reverse osmosis (RO) is a popular tool for water desalination and purification. However, traditional RO membranes have a short lifespan due to membrane fouling, deterioration, decreased salt rejection rate, and the low water flux with aging. As a result, membrane modification has received a lot of attention recently, with nanomaterials being extensively researched to improve membrane efficacy and lifespan. Herein, we present an in-depth analysis of recent advances of RO membranes modification utilizing nanomaterials. An overview of the various nanomaterials used for membrane modification, including metal oxides, zeolites, and carbon nanomaterials, is provided. The synthesis techniques and methods of integrating these nanomaterials into RO membranes are also discussed. The impacts of nanomaterial change on the performance of RO membranes are addressed. The underlying mechanisms responsible for RO membrane enhancements by nanomaterials, such as improved surface hydrophilicity, reduced membrane fouling via surface repulsion and anti-adhesion properties, and enhanced structural stability, are discussed. Furthermore, the review provides a critical analysis of the challenges and limitations associated with the use of nanomaterials to modify RO membranes. Overall, this review provides valuable insights into the modification of RO membranes with nanomaterials, providing a full grasp of the benefits, challenges, and future prospects of this challenging topic.

Thermal self-crosslink after etching for regulated preparation of Ti3C2 type MXene membrane and its preliminary gas separation

We present an innovative methodology for the synthesis of MXene membranes through a dual-stage process involving etching and subsequent thermal self-crosslinking. A molar ratio of 1 (Al3+):9 (F-) using HCl/LiF was employed to convert raw Ti3AlC2 (MAX phase) into MXene within 48 h at 40 °C. This procedure predominantly yielded monolayers distinguished by diameters exceeding 500 nm, elevated crystallinity and a high overall yield. Advanced characterization techniques, including FESEM, TEM, HRTEM, AFM, XPS, and FTIR, were utilized. Instrumental analysis confirmed the formation of MXene exhibiting a single-flake morphology with diameters exceeding 500 nm. These monolayers were intact and continuous, with smooth peripheries and a uniform thickness of 2.1 nm. The surfaces were predominantly composed of carbon (C), oxygen (O), and titanium (Ti) atoms, interconnected by chemical bonds such as C-Ti-O, C-Ti-OH, C-C, C-O, and Ti-O. In the subsequent phase, vacuum filtration facilitated the assembly of a self-supporting MXene membrane. Thermal treatment at 170 °C for 30 h resulted in the reinforcement of C-Ti-O bonds within the nanosheets, increasing their prevalence to 43.14 % and 19.47 %, respectively. This thermal regulation reduced the interlayer d-spacing from 4.33 to 3.54 Å, which significantly improved the gas separation efficiency beyond the Knudsen diffusion limit, as demonstrated by the α H 2 / C F 4 value exceeding 23.0.

Comparative Retention Analysis of Intercalated Cations Inside the Interlayer Gallery of Lamellar and Nonlamellar Graphene Oxide Membranes in Reverse Osmosis Process: A Molecular Dynamics Study

Over the past decade, multilayered graphene oxide (GO) membranes have emerged as promising candidates for desalination applications. Despite their potential, a comprehensive understanding of separation mechanisms remains elusive due to the intricate morphology and structural arrangement of interlayer galleries. Moreover, a critical concern of multilayered GO membranes is their susceptibility to swelling within aqueous environments, which hinders their practical implementation. Therefore, this study introduces cation intercalation within GO laminates to elucidate the underlying factors governing swelling behavior and subsequently mitigate it. Moreover, this study performed nonequilibrium molecular dynamics simulations on the cation (Mg2+ or K+)-intercalated lamellar and nonlamellar GO membranes to understand the effect of the arrangement of GO sheets on the retention time of intercalated cations within GO layers, water permeance, and salt rejection mechanism in the reverse osmosis process using cation-intercalated GO membranes. Our results highlight that lamellar GO membranes exhibit higher water permeance, attributed to their well-defined interlayer gallery structure. On the other hand, nonlamellar GO membranes display superior salt rejection due to their complex interlayer gallery structure that impedes salt permeation. Moreover, the structural complexity of nonlamellar GO membranes contributes to greater stability by retention of the more intercalated cations for a longer time within the layers. Furthermore, it is observed that a higher percentage of Mg2+ cations remained inside the GO laminates as compared to K+ cations, hence resulting in the greater stability of the Mg2+-intercalated GO membrane in the aqueous environment.

Nanoscience and nanotechnology for water remediation: an earnest hope toward sustainability

Water pollution and the global freshwater crisis are the most alarming concerns of the 21st century, as they threaten the sustainability and ecological balance of the environment. The growth of global population, climate change, and expansion of industrial processes are the main causes of these issues. Therefore, effective remediation of polluted water by means of detoxification and purification is of paramount importance. To this end, nanoscience and nanotechnology have emerged as viable options that hold tremendous potential toward the advancement of wastewater treatment methods to enhance treatment efficiency along with augmenting water supply via utilization of unconventional water sources. Materials at the nano level have shown great promise toward water treatment applications owing to their unique physicochemical properties. In this focus article, we highlight the role of new fundamental properties at the nano scale and material properties that are drastically increased due to the nano dimension (e.g. volume-surface ratio) and highlight their impact and potential toward water treatment. We identify and discuss how nano-properties could improve the three main domains of water remediation: the identification of pollutants, their adsorption and catalytic degradation. After discussing all the beneficial aspects we further discuss the key challenges associated with nanomaterials for water treatment. Looking at the current state-of-the-art, the potential as well as the challenges of nanomaterials, we believe that in the future we will see a significant impact of these materials on many water remediation strategies.

Iron Nanoparticle-Incorporated Laser-Induced Graphene Filters for Environmental Remediation via an In Situ Electro-Fenton Process

Laser-induced graphene (LIG) has garnered much attention due to its facile and chemically free fabrication technique. Metal nanoparticle incorporation into the LIG matrix can improve its electrical and catalytical properties for environmental application. Here, we demonstrate the fabrication of nanoscale zerovalent iron (nZVI) nanoparticle-incorporated LIG (Fe-LIG) and sulfidized-nanoscale zerovalent iron (S-nZVI) nanoparticle-incorporated LIG (SFe-LIG) surfaces. The sheets were first fabricated to investigate nanoparticle loading, successful incorporation in the LIG matrix, and electrochemical performance as electrodes. Fe-LIG and SFe-LIG sheets showed ∼3-3.5 times more charge density as compared with the control LIG sheet. The XPS and its deconvolution confirmed the presence of nZVI and S-nZVI in the Fe-LIG and SFe-LIG surfaces, which can generate in situ hydroxyl radical (•OH) via iron activation of electrogenerated hydrogen peroxide (H2O2) in short in situ electro-Fenton process. After confirmation of the successful incorporation of iron-based nanoparticles in the LIG matrix, filters were fabricated to demonstrate the application in the flow-through filtration. The Fe-LIG and SFe-LIG filters showed ∼10-30% enhanced methylene blue removal under the application of 2.5 V at ∼1000 LMH flux. The Fe-LIG and SFe-LIG filters also showed complete 6-log bacteria and virus removal at 2.5 and 5 V, respectively, while the LIG filters showed only ∼4-log removal. Such enhanced removal by the Fe-LIG and SFe-LIG filters as compared to LIG filters is attributed to the improved charge density, electrochemical activity, and in situ electro-Fenton process. The study shows the potential to develop catalytic LIG-based surfaces for various applications, including contaminant removal and microbial inactivation.

Innovative Graphene-Based Nanocomposites for Improvement of Electrochemical Sensors: Synthesis, Characterization, and Applications

Graphene, renowned for its exceptional physicochemical attributes, has emerged as a favored substrate for integrating a wide array of inorganic and organic materials in scientific endeavors and innovations. Electrochemical graphene-based nanocomposite sensors have been developed by incorporating diverse nanoparticles into graphene, effectively immobilized onto electrodes through various techniques. These graphene-based nanocomposite sensors have effectively detected and quantified various electroactive species in samples. This review delves into using graphene nanocomposites to fabricate electrochemical sensors, leveraging the exceptional electrical, mechanical, and thermal properties inherent to graphene derivatives. These nanocomposites showcase electrocatalytic activity, substantial surface area, superior electrical conductivity, adsorption capabilities, and notable porosity, which are highly advantageous for sensing applications. A myriad of characterization techniques, including Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), BET surface area analysis, and X-ray diffraction (XRD), have proven effective in exploring the properties of graphene nanocomposites and validating the adjustable formation of these nanomaterials with graphene. The applicability of these sensors across various matrices, encompassing environmental, food, and biological domains, has been evaluated through electrochemical measurements, such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). This review provides a comprehensive overview of synthesis methods, characterization techniques, and sensor applications pertinent to graphene-based nanocomposites. Furthermore, it deliberates on the challenges and future prospects within this burgeoning field.

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

Tailoring Graphite into Subnanometer Graphene

Within the intersection of materials science and nanoscience/technology, extremely downsized (including quantum-sized and subnanometer-sized) materials attract increasing interest. However, the effective and controllable production of extremely downsized materials through physical strategies remains a great challenge. Herein, an all-physical top-down method for the production of sub-1 nm graphene with completely broken lattice is reported. The graphene subnanometer materials (GSNs) with monolayer structures and lateral sizes of ≈0.5 nm are obtained. Compared with their bulk, nanosheets, and quantum sheets, the intrinsic GSNs present extremely enhanced photoluminescence and nonlinear saturation absorption performances, as well as unique carrier behavior. The non-equilibrium states induced by the entirely exposed and broken, intrinsic lattices in sub-1 nm graphene can be determinative to their extreme performances. This work shows the great potential of broken lattice and provides new insights toward subnanometer materials.

Synthesis, characterization, and environmental applications of graphene-coated sand: A review

Global water quality has deteriorated, leaving over 844 million individuals without access to clean drinking water. While sand filters (SF) offer a solution, their limited surface area and adsorption capacity for emerging contaminants remain a challenge. This has prompted the development of new materials such as graphene-coated sand (GCS) to enhance the sand's adsorptive properties. Notably, GCS also possesses inherent anti-bacterial properties and can function as a photocatalyst when exposed to UV and visible light, offering enhanced water purification. This manuscript 1) reviews the synthesis of GCS, detailing the characterization techniques employed to understand its structure, composition, and multifunctional properties and 2) highlights the superior efficacy of GCS in removing contaminants, including metals (>95 % removal of Cd2+, Pb2+, Zn2+, and Cu2+ in low pH environment), sulfides (full removal compared to 26 % removal by raw sand), antibiotics (98 % removal of tetracycline), and bacteria (complete cell membrane destruction), compared to traditional SF. Due to its enhanced performance and multifaceted purification capabilities, GCS presents a promising alternative to SFs, especially in developing countries, aiming to improve water quality and ensure safe drinking water access. To the best of our knowledge, no other work groups the available research on GCS. Furthermore, future research directions should focus on reducing the overall production cost of GCS, exploring surface modification techniques, and expanding the range of contaminants tested by GCS, to fully realize its potential in water purification.

Ion Transport Behavior in van der Waals Gaps of 2D Materials

2D materials, with advantages of atomic thickness and novel physical/chemical characteristics, have emerged as the vital building blocks for advanced lamellar membranes which possess promising potential in energy storage, ion separation, and catalysis. When 2D materials are stacked together, the van der Waals (vdW) force generated between adjacent layered nanosheets induces the construction of an ordered lamellar membrane. By regulating the interlayer spacing down to the nanometer or even sub-nanometer scale, rapid and selective ion transport can be achieved through such vdW gaps. The further improvement and application of qualified 2D materials-based lamellar membranes (2DLMs) can be fulfilled by the rational design of nanochannels and the intelligent micro-environment regulation under different stimuli. Focusing on the newly emerging advances of 2DLMs, in this review, the common top-down and bottom-up synthesis approaches of 2D nanosheets and the design strategy of functional 2DLMs are briefly introduced. Two essential ion transport mechanisms within vdW gaps are also involved. Subsequently, the responsive 2DLMs based on different types of external stimuli and their unique applications in nanofluid transport, membrane-based filters, and energy storage are presented. Based on the above analysis, the existing challenges and future developing prospects of 2DLMs are further proposed.

Gold-Deposited Graphene Nanosheets for Self-Cleaning Graphene Surface-Enhanced Raman Spectroscopy with Superior Charge-Transfer Contribution

The interaction of graphene with metals initiates charge-transfer interaction-induced chemical enhancements, which critically depend on the doping effect from deposited metallic configurations. In this paper, we have explored the gold nanoparticle-decorated monolayer graphene nanosheets for the large graphene-induced Raman enhancement of adsorbed analytes, indicating the surface-enhanced Raman spectroscopy (SERS) capabilities of metal-doped graphene (G-SERS). Here, the systematically sputtered Au thickness optimization procedure revealed noticeable modifications in the graphene Raman spectra and photoluminescence (PL) background quenching, which indicated favorable charge transfer through n-type doping of chemical vapor deposition-grown graphene nanosheets. The highly consistent, individually distributed morphology of the gold nanoislands over graphene nanosheets depicted a reproducibly uniform G-SERS signal with excellent relative standard deviation values (<5%), resulting in the strongest Raman intensity enhancement factors of ∼108 (MB) (methylene blue) and 107 (DPA) (2,6-pyridinedicarboxylic acid) composed of the weakest PL background. The combined charge-transfer-induced chemical enhancement and electromagnetic enhancement from individual Au nanoislands result in a lowering of detectability down to 10-16 M (MB) and 10-11 M (DPA) concentrations with efficient time-dependent signal stability. Additionally, the GAu demonstrated its effective (∼94.4%) photocatalytic degradation capabilities by decomposing MB dye molecules from a concentration of 1 μM to 2.52 fM within 60 min. Therefore, the prominent charge-transfer contribution through controlled Au decoration over graphene nanosheets provides a potential strategy for fabricating superior SERS sensors and photocatalysts exhibiting adequate signal consistency, stability, and photodegradation efficiency through overcoming the limitations of the traditional sensing platforms.

Applications of graphene oxide (GO) in oily wastewater treatment: Recent developments, challenges, and opportunities

The treatment of oily wastewater has become a serious environmental challenge, for which graphene oxide has emerged as a promising material in solving the problem. The ever-growing utilization of graphene oxide (GO) in the treatment of oily wastewater necessitates a constant review. This review article employs a comprehensive literature survey methodology, systematically examining peer-reviewed articles, focusing on, but not entirely limited to, the last five years. Major databases such as EBSCOhost, Scopus, ScienceDirect, Web of Science and Google Scholar were searched using specific keywords related to GO and oily wastewater treatment. The inclusion criteria focused on studies that specifically address the application, efficiency, and mechanisms of GO in treating oily wastewater. The data extracted from these sources were then synthesized to highlight the most important developments, challenges, and prospects in this field. As far as oily wastewater treatment is concerned, the majority of the studies revolve around the use of GO in mitigating fouling in membrane processes, improving the stability, capacity and reusability of sorbents, and enhancing photodegradation by minimizing charge recombination.

Unveiling the contemporary progress of graphene-based nanomaterials with a particular focus on the removal of contaminants from water: a comprehensive review

Water scarcity and pollution pose significant challenges to global environmental sustainability and public health. As these concerns intensify, the quest for innovative and efficient water treatment technologies becomes paramount. In recent years, graphene-based nanomaterials have emerged as frontrunners in this pursuit, showcasing exceptional properties that hold immense promise for addressing water contamination issues. Graphene, a single layer of carbon atoms arranged in a hexagonal lattice, exhibits extraordinary mechanical, electrical, and chemical properties. These inherent characteristics have led to a surge of interest in leveraging graphene derivatives, such as graphene oxide (GO), reduced graphene oxide and functionalized graphene, for water treatment applications. The ability of graphene-based nanomaterials to adsorb, catalyze, and photocatalyze contaminants makes them highly versatile in addressing diverse pollutants present in water sources. This review will delve into the synthesis methods employed for graphene-based nanomaterials and explore the structural modifications and functionalization strategies implemented to increase their pollutant removal performance in water treatment. By offering a critical analysis of existing literature and highlighting recent innovations, it will guide future research toward the rational design and optimization of graphene-based nanomaterials for water decontamination. The exploration of interdisciplinary approaches and cutting-edge technologies underscores the evolving landscape of graphene-based water treatment, fostering a path toward sustainable and scalable solutions. Overall, the authors believe that this review will serve as a valuable resource for researchers, engineers, and policymakers working toward sustainable and effective solutions for water purification.

Advancement in nanomaterials for environmental pollutants remediation: a systematic review on bibliometrics analysis, material types, synthesis pathways, and related mechanisms

Environmental pollution is a major issue that requires effective solutions. Nanomaterials (NMs) have emerged as promising candidates for pollution remediation due to their unique properties. This review paper provides a systematic analysis of the potential of NMs for environmental pollution remediation compared to conventional techniques. It elaborates on several aspects, including conventional and advanced techniques for removing pollutants, classification of NMs (organic, inorganic, and composite base). The efficiency of NMs in remediation of pollutants depends on their dispersion and retention, with each type of NM having different advantages and disadvantages. Various synthesis pathways for NMs, including traditional synthesis (chemical and physical) and biological synthesis pathways, mechanisms of reaction for pollutants removal using NMs, such as adsorption, filtration, disinfection, photocatalysis, and oxidation, also are evaluated. Additionally, this review presents suggestions for future investigation strategies to improve the efficacy of NMs in environmental remediation. The research so far provides strong evidence that NMs could effectively remove contaminants and may be valuable assets for various industrial purposes. However, further research and development are necessary to fully realize this potential, such as exploring new synthesis pathways and improving the dispersion and retention of NMs in the environment. Furthermore, there is a need to compare the efficacy of different types of NMs for remediating specific pollutants. Overall, this review highlights the immense potential of NMs for mitigating environmental pollutants and calls for more research in this direction.

Advances in the synthesis of heteroatom-doped graphene-based materials and their application in sensors, adsorbents and catalysis

In recent years, as a new type of carbon material, graphene has attracted much attention owing to its high conductivity, large specific surface area and excellent chemical stability. After introducing heteroatoms into graphene, the physical, chemical and biological properties of doped graphene are significantly enhanced. This review focuses on synthesis methods for N, B, P and S co-doped graphene and graphene-based composites and comprehensively discusses their recent applications in the fields of sensors, adsorbents and catalysis. The challenges and application prospects of heteroatom doped graphene materials are also proposed. This study provides a reference and guidance for the development and application of new doped graphene materials.

Biomass waste-derived carbon materials for sustainable remediation of polluted environment: A comprehensive review

In response to the growing global concern over environmental pollution, the exploration of sustainable and eco-friendly materials derived from biomass waste has gained significant traction. This comprehensive review seeks to provide a holistic perspective on the utilization of biomass waste as a renewable carbon source, offering insights into the production of environmentally benign and cost-effective carbon-based materials. These materials, including biochar, carbon nanotubes, and graphene, have shown immense promise in the remediation of polluted soils, industrial wastewater, and contaminated groundwater. The review commences by elucidating the intricate processes involved in the synthesis and functionalization of biomass-derived carbon materials, emphasizing their scalability and economic viability. With their distinctive structural attributes, such as high surface areas, porous architectures, and tunable surface functionalities, these materials emerge as versatile tools in addressing environmental challenges. One of the central themes explored in this review is the pivotal role that carbon materials play in adsorption processes, which represent a green and sustainable technology for the removal of a diverse array of pollutants. These encompass noxious organic compounds, heavy metals, and organic matter, encompassing pollutants found in soils, groundwater, and industrial wastewater. The discussion extends to the underlying mechanisms governing adsorption, shedding light on the efficacy and selectivity of carbon-based materials in different environmental contexts. Furthermore, this review delves into multifaceted considerations, spanning the spectrum from biomass and biowaste resources to the properties and applications of carbon materials. This holistic approach aims to equip researchers and practitioners with a comprehensive understanding of the synergistic utilization of these materials, ultimately facilitating effective and affordable strategies for combatting industrial wastewater pollution, soil contamination, and groundwater impurities.

Hazards of polycyclic aromatic hydrocarbons: a review on occurrence, detection, and role of green nanomaterials on the removal of PAH from the water environment

Organic pollutant contamination in the environment is a serious and dangerous issue, especially for developing countries. Among all organic pollutants, polycyclic aromatic hydrocarbons (PAHs) are the more frequently discovered ones in the environment. PAH contamination is caused chiefly by anthropogenic sources, such as the disposal of residential and industrial waste and automobile air emissions. They are gaining interest due to their environmental persistence, toxicity, and probable bioaccumulation. The existence of PAHs may result in damage to the environment and living things, and there is widespread concern about the acute and chronic threats posed by the release of these contaminants. The detection and elimination of PAHs from wastewater have been the focus of numerous technological developments during recent decades. The development of sensitive and economical monitoring systems for detecting these substances has attracted a lot of scientific attention. Using several nanomaterials and nanocomposites is a promising treatment option for the identification and elimination of PAHs in aquatic ecosystems. This review elaborated on the sources of origin, pathogenicity, and widespread occurrence of PAHs. In addition, the paper highlighted the use of nanomaterial-based sensors in detecting PAHs from contaminated sites and nanomaterial-based absorbents in PAH elimination from wastewater. This review also addresses the development of Graphene and Biofunctionalized nanomaterials for the elimination of PAHs from the contaminated sites.

Photocatalytic Antimicrobials: Principles, Design Strategies, and Applications

Nowadays, the increasing emergence of antibiotic-resistant pathogenic microorganisms requires the search for alternative methods that do not cause drug resistance. Phototherapy strategies (PTs) based on the photoresponsive materials have become a new trend in the inactivation of pathogenic microorganisms due to their spatiotemporal controllability and negligible side effects. Among those phototherapy strategies, photocatalytic antimicrobial therapy (PCAT) has emerged as an effective and promising antimicrobial strategy in recent years. In the process of photocatalytic treatment, photocatalytic materials are excited by different wavelengths of lights to produce reactive oxygen species (ROS) or other toxic species for the killing of various pathogenic microbes, such as bacteria, viruses, fungi, parasites, and algae. Therefore, this review timely summarizes the latest progress in the PCAT field, with emphasis on the development of various photocatalytic antimicrobials (PCAMs), the underlying antimicrobial mechanisms, the design strategies, and the multiple practical antimicrobial applications in local infections therapy, personal protective equipment, water purification, antimicrobial coatings, wound dressings, food safety, antibacterial textiles, and air purification. Meanwhile, we also present the challenges and perspectives of widespread practical implementation of PCAT as antimicrobial therapeutics. We hope that as a result of this review, PCAT will flourish and become an effective weapon against pathogenic microorganisms and antibiotic resistance.

Size Effect of Graphene Oxide on Graphene-Aerogel-Supported Au Catalysts for Electrochemical CO2 Reduction

The lateral size of graphene nanosheets plays a critical role in the properties and microstructure of 3D graphene as well as their application as supports of electrocatalysts for CO2 reduction reactions (CRRs). Here, graphene oxide (GO) nanosheets with different lateral sizes (1.5, 5, and 14 µm) were utilized as building blocks for 3D graphene aerogel (GA) to research the size effects of GO on the CRR performances of 3D Au/GA catalysts. It was found that GO-L (14 µm) led to the formation of GA with large pores and a low surface area and that GO-S (1.5 µm) induced the formation of GA with a thicker wall and isolated pores, which were not conducive to the mass transfer of CO2 or its interaction with catalysts. Au/GA constructed with a suitable-sized GO (5 µm) exhibited a hierarchical porous network and the highest surface area and conductivity. As a result, Au/GA-M exhibited the highest Faradaic efficiency (FE) of CO (FECO = 81%) and CO/H2 ratio at -0.82 V (vs. a Reversible Hydrogen Electrode (RHE)). This study indicates that for 3D GA-supported catalysts, there is a balance between the improvement of conductivity, the adsorption capacity of CO2, and the inhibition of the hydrogen evolution reaction (HER) during the CRR, which is related to the lateral size of GO.

Ultrafast Synthesis of Graphene-Embedded Cyclodextrin-Metal-Organic Framework for Supramolecular Selective Absorbency and Supercapacitor Performance

Limited by preparation time and ligand solubility, synthetic protocols for cyclodextrin-based metal-organic framework (CD-MOF), as well as subsequent derived materials with improved stability and properties, still remains a challenge. Herein, an ultrafast, environmentally friendly, and cost-effective microwave method is proposed, which is induced by graphene oxide (GO) to design CD-MOF/GOs. This applicable technique can control the crystal size of CD-MOFs from macro- to nanocrystals. CD-MOF/GOs are investigated as a new type of supramolecular adsorbent. It can selectively adsorb the dye molecule methylene green (MG) owing to the synergistic effect between the hydrophobic nanocavity of CDs, and the abundant O-containing functional groups of GO in the composites. Following high temperature calcination, the resulting N, S co-doped porous carbons derived from CD-MOF/GOs exhibit a high capacitance of 501 F g-1 at 0.5 A g-1 , as well as stable cycling stability with 90.1% capacity retention after 5000 cycles. The porous carbon exhibits good electrochemical performance due to its porous surface containing numerous electrochemically active sites after dye adsorption and carbonization. The design strategy by supramolecular incorporating a variety of active molecules into CD-MOFs optimizes the properties of their derived materials, furthering development toward the fabrication of zeitgeisty and high-performance energy storage devices.

Polycation-Intercalated MXene Membrane with Enhanced Permselective and Anti-Microbial Properties

Two-dimensional (2D) nanomaterial-based membranes feature attractive properties for molecular separation and transport, which exhibit huge potential in various chemical processes. However, the low permeability and bio-fouling of the MXene membrane in water treatment become huge obstacles to its practical application. Herein, a highly permselective and anti-bacterial 2D nanofiltration membrane is fabricated by intercalating a polycation of polydiallyldimethylammonium chloride (PDDA) into the Ti3C2Tx MXene laminar architecture through a facile and patternable electrostatic assembly strategy. As a result, the as-fabricated Ti3C2Tx/PDDA composite membrane exhibits higher water permeance up to 73.4 L m-2 h-1 with a rejection above 94.6% for MgCl2. The resultant membrane simultaneously possesses good resistance to swelling and long-term stability in water environments, even after 8 h. Additionally, the Ti3C2Tx/PDDA membrane also demonstrates a high flux recovery ratio of nearly 96.1% to bovine serum albumin proteins after being cleaned. More importantly, the current membrane shows excellent anti-adhesive and anti-microbial activity against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus), with inhibition rates of 90% and 95% against E. coli and S. aureus, respectively. This holds great potential for the application of the polyelectrolyte-intercalated MXene membrane in serving as a promising platform to separate molecules and/or ions in an aquatic environment.

Multifunctional sodium alginate/chitosan-modified graphene oxide reinforced membrane for simultaneous removal of nanoplastics, emulsified oil, and dyes in water

Membrane technology is widely recognized as an efficient and advanced approach for wastewater treatment. However, the development of environmentally friendly and versatile membranes capable of effectively removing multiple contaminants remains a significant challenge. Inspired by natural magnets, we developed a heterostructured membrane using biomass materials to achieve the efficient removal of multiple contaminants from wastewater. Specifically, a bionic three-layer SA/GO/CS composite membrane was prepared by using sodium alginate (SA) and chitosan (CS) to modify graphene oxide (GO), respectively, and then assembled to both sides of the glass fiber (GF) membrane. The composite membranes achieved 99.87 % and 97.10 % removal of NPs with particle sizes of 500 nm and 50 nm. Moreover, the membrane demonstrated superior separation performance for mixed wastewater, enabling effective treatment of a broad spectrum of contaminants. Additionally, the membrane exhibited excellent stability when exposed to strong acid and alkali environments and demonstrated good recyclability throughout the multiple contaminants removal process. The bionic membrane, prepared using a straightforward method proposed in this study, provides an effective approach for enhanced removal of multiple contaminants in water. These findings contribute to the advancement of eco-friendly and versatile wastewater treatment membranes, opening new possibilities for sustainable water purification technologies.

Hydrothermal Pretreatment of KOH for the Preparation of PAC and Its Adsorption on TC

The environment has been heavily contaminated with tetracycline (TC) due to its excessive use; however, activated carbon possessing well-developed pores can effectively adsorb TC. This study synthesized pinecone-derived activated carbon (PAC) with high specific surface area (1744.659 cm²/g, 1688.427 cm²/g) and high adsorption properties (840.62 mg/g, 827.33 mg/g) via hydrothermal pretreatment methods utilizing pinecones as precursors. The results showed that PAC treated with 6% KOH solution had excellent adsorption properties. It is found that the adsorption process accords with the PSO model, and a large amount of C=C in PAC provides the carrier for π-πEDA interaction. The results of characterization and the isothermal model show that TC plays a key role in the adsorption process of PAC. It is concluded that the adsorption process of TC on PAC prepared by hydrothermal pretreatment is mainly pore filling and π-πEDA interaction, which makes it a promising adsorbent for TC adsorption.

Toxicity and Biotransformation of Carbon-Based Nanomaterials in Marine Microalgae Heterosigma akashiwo

This work is related to the environmental toxicology risk assessment and evaluation of the possible transformation of carbon-based nanomaterials (CNMs) after contact with marine microalgae. The materials used in the study represent common and widely applied multi-walled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO). The toxicity was evaluated as growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species generation changes. The measurement was performed with flow cytometry after 3, 24, 96 h, and 7 days. The biotransformation of nanomaterials was evaluated after 7 days of microalgae cultivation with CNMs by FTIR and Raman spectroscopy. The calculated toxic level (EC50 in mg/L, 96 h) of used CNMs reduced in the following order: CNTs (18.98) > GrO (76.77) > Gr (159.40) > C60 (414.0). Oxidative stress and membrane depolarization were the main toxic action of CNTs and GrO. At the same time, Gr and C60 decreased the toxic action with time and had no negative impact on microalgae after 7 days of exposure even at the concentration of 125 mg/L. Moreover, C60 and Gr after 7 days of contact with microalgae cells obtained structural deformations.

Effects of Graphene Oxide Nanosheets in Freshwater Biofilms

Graphene oxide (GO) properties make it a promising material for graphene-based applications in areas such as biomedicine, agriculture, and the environment. Thus, its production is expected to increase, reaching hundreds of tons every year. One GO final destination is freshwater bodies, possibly affecting the communities of these systems. To clarify the effect that GO may impose in freshwater communities, a fluvial biofilm scraped from submerged river stones was exposed to a range (0.1 to 20 mg/L) of GO concentrations during 96 h. With this approach, we hypothesized that GO can: (1) cause mechanical damage and morphological changes in cell biofilms; (2) interfere with the absorption of light by biofilms; (3) and generate oxidative stress, causing oxidative damage and inducing biochemical and physiological alterations. Our results showed that GO did not inflict mechanical damage. Instead, a positive effect is proposed, linked to the ability of GO to bind cations and increase the micronutrient availability to biofilms. High concentrations of GO increased photosynthetic pigment (chlorophyll a, b, and c, and carotenoids) content as a strategy to capture the available light more effectively as a response to the shading effect. A significant increase in the enzymatic (SOD and GSTs activity) and low molecular weight (lipids and carotenoids) antioxidant response was observed, that efficiently reduced oxidative stress effects, reducing the level of peroxidation, and preserving membrane integrity. Being complex entities, biofilms are more similar to environmental communities and may provide more accurate information to evaluate the impact of GO in aquatic systems.

Cation Exchange Membranes and Process Optimizations in Electrodialysis for Selective Metal Separation: A Review

The selective separation of metal species from various sources is highly desirable in applications such as hydrometallurgy, water treatment, and energy production but also challenging. Monovalent cation exchange membranes (CEMs) show a great potential to selectively separate one metal ion over others of the same or different valences from various effluents in electrodialysis. Selectivity among metal cations is influenced by both the inherent properties of membranes and the design and operating conditions of the electrodialysis process. The research progress and recent advances in membrane development and the implication of the electrodialysis systems on counter-ion selectivity are extensively reviewed in this work, focusing on both structure-property relationships of CEM materials and influences of process conditions and mass transport characteristics of target ions. Key membrane properties, such as charge density, water uptake, and polymer morphology, and strategies for enhancing ion selectivity are discussed. The implications of the boundary layer at the membrane surface are elucidated, where differences in the mass transport of ions at interfaces can be exploited to manipulate the transport ratio of competing counter-ions. Based on the progress, possible future R&D directions are also proposed.