Insight into the Rate-Determining Step in Photocatalytic Z-Scheme Overall Water Splitting by Employing A Series of Perovskite RTaON2 (R = Pr, Nd, Sm, and Gd) as Model Photocatalysts

Photocatalysis is an intricate process that involves a multitude of physical and chemical factors operating across diverse temporal and spatial scales. Identifying the dominant factors that influence photocatalyst performance is one of the central challenges in the field. Here, we synthesized a series of perovskite RTaON2 semiconductors with different A-site rare earth atoms (R = Pr, Nd, Sm, and Gd) as model photocatalysts to discuss the influence of the A-site modulation on their local structures as well as both physical and chemical properties and to get insight into the rate-determining step in photocatalytic Z-scheme overall water splitting (OWS). It is interesting to find that, with a decreasing ionic radius of the A-site cations, the RTaON2 compounds exhibit continuous blue shift of light absorption and a concomitant reduction in the lifetime of photogenerated carriers, revealing a significant influence of A-site atoms on the light absorption and charge separation processes. On the other hand, the A-site atomic substitution was revealed to significantly modulate the valence band positions as well as surface oxidation kinetics. By employing the Pt-modified RTaON2 as H2-evolving photocatalysts, the activity of photocatalytic Z-scheme OWS for hydrogen production on them is found to be determined by its surface oxidation process instead of light absorption or charge separation. Our results give the first experimental demonstration of the rate-determining step during the photocatalytic Z-scheme OWS processes, as should be instructive for the design and development of other efficient solar-to-chemical energy conversion systems.

Preparation and Application of a Novel S-Scheme Nanoheterojunction Photocatalyst (LaNi0.6Fe0.4O3/g-C3N4)

Rapid recombination of photogenerated electrons and holes affects the performance of a semiconductor device and limits the efficiency of photocatalytic water splitting for hydrogen production. The use of an S-scheme nanoscale heterojunction catalyst for the separation of photogenerated charge carriers is a feasible approach to achieve high-efficiency photocatalytic hydrogen evolution. Therefore, we synthesized a three-dimensional S-scheme nanoscale heterojunction catalyst (LaNi0.6Fe0.4O3/g-C3N4) and investigated its activity in photocatalytic water splitting. An analysis of the band structure (XPS, UPS, and Mott-Schottky) indicated effective interfacial charge transfer in an S-scheme nanoscale heterojunction composed of two n-type semiconductors. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) spectroscopy confirmed that the light-induced charge transfer followed the S-scheme mechanism. Based on the capture test (EPR) of •OH free radicals, it can be seen that the enhanced activity is attributed to the S-scheme carrier migration mechanism in heterojunction, which promotes the rapid adsorption of H+ by the abundant amino sites in g-C3N4, thus effectively generating H2. The 2D/2D LaNi0.6Fe0.4O3/g-C3N4 heterojunction has a good interface and produces a built-in electric field, improving the separation of e- and h+ while increasing the oxygen vacancy. The synergistic effect of the heterostructure and oxygen vacancy makes the photocatalyst significantly better than LaNi0.6Fe0.4O3 and g-C3N4 in visible light. The hydrogen evolution rate of the composite catalyst (LaNi0.6Fe0.4O3/g-C3N4-70 wt %) was 34.50 mmol·h-1·g-1, which was 40.6 times and 9.2 times higher than that of the catalysts (LaNiO3 and g-C3N4), respectively. After 25 h of cyclic testing, the catalyst (LaNi0.6Fe0.4O3/g-C3N4-70 wt %) composite material still exhibited excellent hydrogen evolution performance and photostability. It was confirmed that the synergistic effect between abundant active sites, enriched oxygen vacancies, and 2D/2D heterojunctions improved the photoinduced carrier separation and the light absorption efficiency of visible light. This study opens up new possibilities for the logical design of efficient photodecomposition using 2D/2D heterojunctions combined with oxygen vacancies.

Recent progress in defect-engineered metal oxides for photocatalytic environmental remediation

Rapid industrial advancement over the last few decades has led to an alarming increase in pollution levels in the ecosystem. Among the primary pollutants, harmful organic dyes and pharmaceutical drugs are directly released by industries into the water bodies which serves as a major cause of environmental deterioration. This warns of a severe need to find some sustainable strategies to overcome these increasing levels of water pollution and eliminate the pollutants before being exposed to the environment. Photocatalysis is a well-established strategy in the field of pollutant degradation and various metal oxides have been proven to exhibit excellent physicochemical properties which makes them a potential candidate for environmental remediation. Further, with the aim of rapid industrialization of photocatalytic pollutant degradation technology, constant efforts have been made to increase the photocatalytic activity of various metal oxides. One such strategy is the introduction of defects into the lattice of the parent catalyst through doping or vacancy which plays a major role in enhancing the catalytic activity and achieving excellent degradation rates. This review provides a comprehensive analysis of defects and their role in altering the photocatalytic activity of the material. Various defect-rich metal oxides like binary oxides, perovskite oxides, and spinel oxides have been summarized for their application in pollutant degradation. Finally, a summary of existing research, followed by the existing challenges along with the potential countermeasures has been provided to pave a path for the future studies and industrialization of this promising field.

Catalyzing Artificial Photosynthesis with TiO2 Heterostructures and Hybrids: Emerging Trends in a Classical yet Contemporary Photocatalyst

Titanium dioxide (TiO2) stands out as a versatile transition-metal oxide with applications ranging from energy conversion/storage and environmental remediation to sensors and optoelectronics. While extensively researched for these emerging applications, TiO2 has also achieved commercial success in various fields including paints, inks, pharmaceuticals, food additives, and advanced medicine. Thanks to the tunability of their structural, morphological, optical, and electronic characteristics, TiO2 nanomaterials are among the most researched engineering materials. Besides these inherent advantages, the low cost, low toxicity, and biocompatibility of TiO2 nanomaterials position them as a sustainable choice of functional materials for energy conversion. Although TiO2 is a classical photocatalyst well-known for its structural stability and high surface activity, TiO2-based photocatalysis is still an active area of research particularly in the context of catalyzing artificial photosynthesis. This review provides a comprehensive overview of the latest developments and emerging trends in TiO2 heterostructures and hybrids for artificial photosynthesis. It begins by discussing the common synthesis methods for TiO2 nanomaterials, including hydrothermal synthesis and sol-gel synthesis. It then delves into TiO2 nanomaterials and their photocatalytic mechanisms, highlighting the key advancements that have been made in recent years. The strategies to enhance the photocatalytic efficiency of TiO2, including surface modification, doping modulation, heterojunction construction, and synergy of composite materials, with a specific emphasis on their applications in artificial photosynthesis, are discussed. TiO2-based heterostructures and hybrids present exciting opportunities for catalyzing solar fuel production, organic degradation, and CO2 reduction via artificial photosynthesis. This review offers an overview of the latest trends and advancements, while also highlighting the ongoing challenges and prospects for future developments in this classical yet rapidly evolving field.

Thermally Induced Lattice-Defective Oxygen Breathing in Perovskite-Structure Stannates with High-Contrast Reversible Thermochromism

Inorganic thermochromic materials exhibit a tunable color gamut and a wide chromatic temperature range, indicating their potential for intelligent adaptive applications in thermal warning, temperature indication, thermal regulation, and interactive light-to-thermal energy conversion. However, most metal-oxide-based thermochromic materials show weak chromaticity adaption with the change of temperature, which needs further understanding of the microscopic principle to clarify the potential route to improve the contrast and identifiability for fabricating better thermochromic materials. Using perovskite-structure (AMO3) alkaline earth metal stannate (Ba1-xSrxSnO3, 0.0 ≤ x ≤ 1.0) as a model system, this paper reports for the first time the mechanism of the properties of thermally induced defect-enhanced charge transfer-type (CTT) thermochromic materials and the strategy for regulating their thermochromic properties by A-site cations. BaSnO3 exhibits continuously reversible thermochromic properties with high contrast from weak light yellow (b* = 11) to strong bright yellow (b* = 58) between room temperature and 550 °C. In-situ high-temperature X-ray diffraction (in-situ XRD), in-situ UV-vis absorption spectroscopy (in-situ UV-vis), thermogravimetric (TG), and electron paramagnetic resonance (EPR) spectra indicate that this excellent thermochromic phenomenon is attributed to the weakening of Sn-O bond hybridization at high temperatures, as well as the formation of a large number of oxygen vacancies at the top of the valence band, and the enhanced charge transfer resulting from the generation of impurity levels in the Sn2+ 5s2 intermediate. Replacing Ba2+ by Sr2+ in Ba1-xSrxSnO3 successfully tuned the thermochromic properties, which is attributed to the Sr2+ doping level-directed oxygen defect concentration and deoxygenation rate. The demonstrated defect-enhanced charge transfer behavior promotes a feasible route for lattice oxygen-mediated thermochromic materials and provides a fundamental relationship between thermally induced defects and colorimetry.

Improving the Oxygen Evolution Reaction: Exsolved Cobalt Nanoparticles on Titanate Perovskite Catalyst

Perovskites are an important class of oxygen evolution reaction (OER) catalysts due to highly tunable compositions and adaptable characteristics. However, perovskite-based catalysts can have limited atom utilization efficiency due to large particle size, resulting in low mass activity. Herein, Cobalt nanoparticles are exsolved from La0.2+2x Ca0.7-2x Ti1-x Cox O3 perovskite and applied in OER. Upon reduction in the 5% H2 /N2 atmosphere at 800 °C for 2 h, the Co exsolved perovskite catalyst (R-LCTCo0.11) exhibits optimal OER performance. The mass activity of R-LCTCo0.11 reaches ≈1700 mA mg-1 at an overpotential of 450 mV, which is 17 times and 3 times higher than that of LCTCo0.11 (97 mA mg-1 ) and R-Mix (560 mA mg-1 ) catalysts respectively, surpassing the benchmark catalyst RuO2 (42.7 mA mg-1 of oxide at η = 470 mV). Electrochemical impedance spectroscopy (EIS) data reveals that R-LCTCo0.11 has the lowest charge transfer resistance (Rct  = 58 Ω), demonstrating the highest catalytic and kinetic activity for OER. Furthermore, this catalyst shows high stability during an accelerated durability test of 10 h electrolysis and 1000 cycles cyclic voltammetry (CV). This work demonstrates that nanoparticle exsolution from a doped perovskite is an effective strategy for improving the atom utilization efficiency in OER.

Effect of synthesis methodologies upon the photocatalytic performance of Bi0.5Na0.5TiO3 for pollutant degradation

In the face of mounting environmental concerns, we must seek out innovative solutions for remediation. Using nanomaterials to degrade organic pollutants in water under ambient visible light holds great promise as a safe, cost-efficient, and effective approach to addressing pollution in our water bodies. The development of novel materials capable of such pollution degradation is desired to preserve the environment. In this study, Bi0.5Na0.5TiO3 (BNT) nanoparticles are synthesized through hydrothermal and solid-state routes, and their physicochemical properties are compared to assess their photocatalytic performance. The results of the characterization studies indicate that the hydrothermally synthesized nanoparticles outperformed the solid-state synthesized counterparts in terms of photocatalytic performance. The photocatalytic degradation of Rhodamine blue dye under ambient light exposure is examined at various dye concentrations and catalyst dosages. BNT nanoparticles demonstrated excellent photocatalytic properties, stability, and recyclability, making them a promising candidate for various photocatalytic applications. The findings of this study could pave the way for the development of sustainable and environmentally friendly photocatalytic technologies for water remediation.

Active learning guides discovery of a champion four-metal perovskite oxide for oxygen evolution electrocatalysis

Multi-metal oxides in general and perovskite oxides in particular have attracted considerable attention as oxygen evolution electrocatalysts. Although numerous theoretical studies have been undertaken, the most promising perovskite-based catalysts continue to emerge from human-driven experimental campaigns rather than data-driven machine learning protocols, which are often limited by the scarcity of experimental data on which to train the models. This work promises to break this impasse by demonstrating that active learning on even small datasets-but supplemented by informative structural-characterization data and coupled with closed-loop experimentation-can yield materials of outstanding performance. The model we develop not only reproduces several non-obvious and actively studied experimental trends but also identifies a composition of a perovskite oxide electrocatalyst exhibiting an intrinsic overpotential at 10 mA cm-2oxide of 391 mV, which is among the lowest known of four-metal perovskite oxides.

Strategies for improving the stability of perovskite for photocatalysis: A review of recent progress

Photocatalysis is currently a hot research field, which provides promising processes to produce green energy sources and other useful products, thus eventually benefiting carbon emission reduction and leading to a low-carbon future. The development and application of stable and efficient photocatalytic materials is one of the main technical bottlenecks in the field of photocatalysis. Perovskite has excellent performance in the fields of photocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), carbon dioxide reduction reaction (CO2RR), organic synthesis and pollutant degradation due to its unique structure, flexibility and resulting excellent photoelectric and catalytic properties. The stability problems caused by perovskite's susceptibility to environmental influences hinder its further application in the field of photocatalysis. Therefore, this paper innovatively summarizes and analyzes the existing methods and strategies to improve the stability of perovskite in the field of photocatalysis. Specifically, (i) component engineering, (ii) morphological control, (iii) hybridization and encapsulation are thought to improve the stability of perovskites while improving photocatalytic efficiency. Finally, the challenges and prospects of perovskite photocatalysts are discussed, which provides constructive thinking for the potential application of perovskite photocatalysts.

Energetic Stability and Band-Edge Orbitals of Layered Inorganic Perovskite Compounds for Solar Energy Applications

Halide and oxide perovskite semiconductors (e.g., CsPbI3 and SrTiO3) have been widely studied for solar energy conversion applications. The optoelectronic properties and performance of these compounds can be tuned through the growth of layered perovskite superstructures. While oxides are quite varied in the compositions and geometries taken up by layered perovskites, halides have proven much more limited. In this paper, we use density functional theory calculations and chemical intuition to explore why this is the case. We show that, in general, the thermodynamic stability or instability of layered perovskite superstructures depends on the interplay of their ionic and covalent character and, just as importantly, on the features of other competing phases.

Environmental remediation of hazardous pollutants using MXene-perovskite-based photocatalysts: A review

Photocatalysis utilizing semiconductors offer a cost-effective and promising solution for the removal of pollutants. MXene and perovskites, which possess desirable properties such as a suitable bandgap, stability, and affordability, have emerged as a highly promising material for photocatalytic activity. However, the efficiency of MXene and perovskites is limited by their fast recombination rates and inadequate light harvesting abilities. Nonetheless, several additional modifications have been shown to enhance their performance, thereby warranting further exploration. This study delves into the fundamental principles of reactive species for MXene-perovskites. Various methods of modification of MXene-perovskite-based photocatalysts, including Schottky junction, Z-scheme and S-scheme are analyzed with regard to their operation, differences, identification techniques and reusability. The assemblance of heterojunctions is demonstrated to enhance photocatalytic activity while also suppressing charge carrier recombination. Furthermore, the separation of photocatalysts through magnetic-based methods is also investigated. Consequently, MXene-perovskite-based photocatalysts are seen as an exciting emerging technology that necessitates further research and development.

Ferroelectric polarization reversals in C2N/α-In2Se3 van der Waals heterostructures: a conversion from the traditional type-II to S-scheme

Introduction: Ferroelectric substances, characterized by inherent spontaneous polarization, can boost photocatalytic efficiency by facilitating the separation of photogenerated carriers. However, conventional photocatalysts with perovskite-class ferroelectricity are generally constrained by their 3D arrangement, leading to less accessible active sites for catalysis and a smaller specific surface area compared to a 2D layout. Methods: In my research, I developed a 2D ferroelectric heterostructure consisting of C2N/α-In2Se3. I performed first-principle calculations on the 2D C2N/α-In2Se3 heterostructure, specifically varying the out-of-plane ferroelectric polarization directions. I primarily focused on C2N/α-In2Se3 (I) and C2N/α-In2Se3 (II) heterostructures. Results: My findings revealed that reversing the ferroelectric polarization of the 2D α-In2Se3 layer in the heterostructures led to a transition from the conventional type-II [C2N/α-In2Se3 (I)] to an S-scheme [C2N/α-In2Se3 (II)]. The S-scheme heterostructure [C2N/α-In2Se3 (II)] demonstrated a high optical absorption rate of 17% in visible light, marking it as a promising photocatalytic material. Discussion: This research underscores the significance of ferroelectric polarization in facilitating charge transfer within heterogeneous structures. It provides a theoretical perspective for developing enhanced S-scheme photocatalysts, highlighting the potential of 2D ferroelectric heterostructures in photocatalytic applications.

Synergistically Enhanced Photocatalytic Degradation by Coupling Slow-Photon Effect with Z-Scheme Charge Transfer in CdS QDs/IO-TiO2 Heterojunction

Lower light absorption and faster carrier recombination are significant challenges in photocatalysis. This study introduces a novel approach to address these challenges by anchoring cadmium sulfide quantum dots (CdS QDs) on inverse opal (IO)-TiO₂, which increases light absorption and promotes carriers' separation by coupling slow-photon effect with Z-scheme charge transfer. Specifically, the IO-TiO₂ was created by etching a polystyrene opal template, which resulted in a periodic structure that enhances light absorption by reflecting light in the stop band. The size of CdS quantum dots (QDs) was regulated to achieve appropriate alignment of energy bands between CdS QDs and IO-TiO₂, promoting carrier transfer through alterations in charge transfer modes and resulting in synergistic-amplified photocatalysis. Theoretical simulations and electrochemical investigations demonstrated the coexistence of slow-photon effects and Z-scheme transfer. The system's photodegradation performance was tested using rhodamine B as a model. This novel hierarchical structure of the Z-scheme heterojunction exhibits degradability 7.82 and 4.34 times greater than pristine CdS QDs and IO-TiO₂, respectively. This study serves as a source of inspiration for enhancing the photocatalytic capabilities of IO-TiO₂ and broadening its scope of potential applications.

Synthesis and Structure of the Double-Layered Sillén-Aurivillius Perovskite Oxychloride La2.1Bi2.9Ti2O11Cl as a Potential Photocatalyst for Stable Visible Light Solar Water Splitting

Exploring photocatalysts for solar water splitting is a relevant step toward sustainable hydrogen production. Sillén-Aurivillius-type compounds have proven to be a promising material class for photocatalytic and photoelectrochemical water splitting with the advantage of visible light activity coupled to enhanced stability because of their unique electronic structure. Especially, double- and multilayered Sillén-Aurivillius compounds [An-1BnO3n+1][Bi2O2]2Xm, with A and B being cations and X a halogen anion, offer a great variety in material composition and properties. Yet, research in this field is limited to only a few compounds, all of them containing mainly Ta5+ or Nb5+ as cations. This work takes advantage of the outstanding properties of Ti4+ demonstrated in the context of photocatalytic water splitting. A fully titanium-based oxychloride, La2.1Bi2.9Ti2O11Cl, with a double-layered Sillén-Aurivillius intergrowth structure is fabricated via a facile one-step solid-state synthesis. A detailed crystal structure analysis is performed via powder X-ray diffraction and correlated to density functional theory calculations, providing a detailed understanding of the site occupancies in the unit cell. The chemical composition and the morphology are studied using scanning and transmission electron microscopy together with energy-dispersive X-ray analysis. The capability of the compound to absorb visible light is demonstrated by UV-vis spectroscopy and analyzed by electronic structure calculations. The activity toward the hydrogen and the oxygen evolution reaction is evaluated by measuring anodic and cathodic photocurrent densities, oxygen evolution rates, and incident-current-to-photon efficiencies. Thanks to the incorporation of Ti4+, this Sillén-Aurivillius-type compound enables best-in-class photoelectrochemical water splitting performance at the oxygen evolution side under visible light irradiation. Thus, this work highlights the potential of Ti-containing Sillén-Aurivillius-type compounds as stable photocatalysts for visible light-driven solar water splitting.

Porphyrin-Based Covalent Organic Frameworks: Design, Synthesis, Photoelectric Conversion Mechanism, and Applications

Photosynthesis occurs in high plants, and certain organisms show brilliant technology in converting solar light to chemical energy and producing carbohydrates from carbon dioxide (CO₂). Mimicking the mechanism of natural photosynthesis is receiving wide-ranging attention for the development of novel materials capable of photo-to-electric, photo-to-chemical, and photocatalytic transformations. Porphyrin, possessing a similar highly conjugated core ring structure to chlorophyll and flexible physical and chemical properties, has become one of the most investigated photosensitizers. Chemical modification and self-assembly of molecules as well as constructing porphyrin-based metal (covalent) organic frameworks are often used to improve its solar light utilization and electron transfer rate. Especially porphyrin-based covalent organic frameworks (COFs) in which porphyrin molecules are connected by covalent bonds combine the structural advantages of organic frameworks with light-capturing properties of porphyrins and exhibit great potential in light-responsive materials. Porphyrin-based COFs are expected to have high solar light utilization, fast charge separation/transfer performance, excellent structural stability, and novel steric selectivity by special molecular design. In this paper, we reviewed the research progress of porphyrin-based COFs in the design, synthesis, properties, and applications. We focused on the intrinsic relationship between the structure and properties, especially the photoelectric conversion properties and charge transfer mechanism of porphyrin-based COFs, and tried to provide more valuable information for the design of advanced photosensitizers. The applications of porphyrin-based COFs in photocatalysis and phototherapy were emphasized based on their special structure design and light-to-electric (or light-to-heat) conversion control.

Cocatalyst loaded Al-SrTiO3 cubes for Congo red dye photo-degradation under wide range of light

The continued pollution, waste, and unequal distribution of the limited amount of fresh water on earth are pushing the world into water scarcity crisis. Consequently, development of revolutionary, cost-effective, and efficient techniques for water purification is essential. Herein, molten flux method was used for the preparation of micro-sized Al-doped SrTiO₃ photocatalyst loaded with RhCr₂O₃ and CoOOH cocatalysts via simple impregnation method for the photo-assisted degradation of Congo red dye under UV and visible irradiation compared with P25 standard photocatalyst. In addition, photoelectrochemical analysis was conducted to reveal the separation and transfer efficiency of the photogenerated e^-/h⁺ pairs playing the key role in photocatalysis. SEM and TEM analyses revealed that both P25 and the pristine SrTiO₃ have spherical shapes, while Al-doped SrTiO₃ and the sample loaded with cocatalysts have cubic shapes with a relatively higher particle size reaching 145 nm. In addition, the lowest bandgap is due to Al⁺³ ion doping and excessive surface oxygen vacancies, as confirmed by both UV-Vis diffuse-reflectance and XPS analyses. The loading of the cocatalysts resulted in a change in the bandgap from n-type (pristine SrTiO₃ and Al-SrTiO₃) into p-type (cocatalyst loaded sample) as exhibited by Mott-Schottky plots. Besides, the cocatalyst-loaded sample exhibited good performance stability after 5 cycles of the photocatalytic removal of Congo red dye. OH^· radical was the primary species responsible for CR degradation as confirmed by experiments with radical scavengers. The observed performance of the prepared samples under both UV and visible light could foster the ongoing efforts towards more efficient photocatalysts for water purification.

High-Entropy Perovskites for Energy Conversion and Storage: Design, Synthesis, and Potential Applications

Perovskites have shown tremendous promise as functional materials for several energy conversion and storage technologies, including rechargeable batteries, (electro)catalysts, fuel cells, and solar cells. Due to their excellent operational stability and performance, high-entropy perovskites (HEPs) have emerged as a new type of perovskite framework. Herein, this work reviews the recent progress in the development of HEPs, including synthesis methods and applications. Effective strategies for the design of HEPs through atomistic computations are also surveyed. Finally, an outlook of this field provides guidance for the development of new and improved HEPs.

Assembly of copper-clusters into a framework: enhancing the structural stability and photocatalytic HER performance

We synthesized a novel Cu₈ cluster and employed it as a building block to further obtain a copper cluster-based MOF material (CCMOF). Compared with the Cu₈ cluster precursor, the periodically constructed CCMOF exhibited better structural stability, and showed enhanced photocatalytic H₂ evolution performance due to efficient mass/charge transportation benefitting from the ordered porous framework structure. This two-step grafting construction strategy is of great significance to the exploration of copper clusters in catalytic applications.

Polymeric ionic liquid-based formulations for the fabrication of highly stable perovskite nanocrystal composites for photocatalytic applications

Halide perovskite nanocrystals (PNCs) have emerged as potential visible-light photocatalysts because of their outstanding intrinsic properties, including high absorption coefficient and tolerance to defects, which reduces non-radiative recombination, and high oxidizing/reducing power coming from their tuneable band structure. Nevertheless, their sensitivity to humidity, light, heat and water represents a great challenge that limits their applications in solar driven photocatalytic applications. Herein, we demonstrate the synergistic potential of embedding PNCs into polymeric ionic liquids (PILs@PS) to fabricate suitable composites for photodegradation of organic dyes. In this context, the stability of the PNCs after polymeric encapsulation was enhanced, showing better light, moisture, water and thermal stability compared to pristine PNCs for around 200 days.

Increasing the Efficiency of Photocatalytic Water Splitting via Introducing Intermediate Bands

Photocatalytic water splitting is a potential way to utilize solar energy. To be practically useful, it is important to have a high solar-to-hydrogen (STH) efficiency. In this study, we propose a conceptually new photocatalytic water splitting model based on intermediate bands (IBs). In this new model, introducing IBs within the band gap can significantly increase the STH efficiency limit (from 30.7% to 48.1% without an overpotential and from 13.4% to 36.2% with overpotentials) compared to that in conventional single-band gap photocatalytic water splitting. First-principles calculations indicate that N-doped TiO₂, Bi-doped TiO₂, and P-doped ZnO have suitable IBs that can be used to construct IB photocatalytic water splitting systems. The STH efficiency limits of these three doped systems are 10.0%, 12.0%, and 19.0%, respectively, while those of pristine TiO₂ and ZnO without IB are only 0.9% and 1.6%, respectively. The IB photocatalytic water splitting model proposed in this study opens a new avenue for photocatalytic water splitting design.

Luminescence nanothermometry using a trivalent lanthanide co-doped perovskite

This study investigates in detail the laser-mediated upconversion emission and temperature-sensing capability of (Ca_0.99-a Yb_0.01Er _a )TiO₃. Samples were prepared at different concentrations to observe the effect of erbium on upconversion while increasing its concentration and keeping all the other parameters constant. Doping is a widespread technological process which involves incorporating an element called a dopant in a lower ratio to the host lattice to derive hybrid materials with desired properties. The (Ca_0.99-a Yb_0.01Er _a )TiO₃ perovskite nanoparticles were synthesized via a sol-gel technique. The frequency upconversion was performed using a 980 nm laser diode excitation source. X-ray diffractometry (XRD) confirmed that the synthesized samples are crystalline in nature and have an orthorhombic structure. The temperature-sensing ability was examined using the fluorescence intensity ratio (FIR) algorithm of two emission bands (²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2) of the Er³⁺ ion. Temperature-dependent upconversion luminescence is observed over a broad temperature range of 298-623 K. The maximum sensor sensitivity obtained is 6.71 × 10^-3 K^-1 at 110°.

Atomistic Description of the Impact of Spacer Selection on Two-Dimensional (2D) Perovskites: A Case Study of 2D Ruddlesden-Popper CsPbI3 Analogues

Inorganic CsPbI₃ perovskites have become desirable for use in photovoltaic devices due to their excellent optoelectronic properties and increased resilience to thermal degradation compared to organic-inorganic perovskites. An effective strategy for improving both the performance and the phase stability of CsPbI₃-based perovskites is through introducing a diverse set of spacing cations separating inorganic layers in their two-dimensional (2D) analogues. In this work, CsPbI₃-based 2D Ruddlesden-Popper perovskites were investigated using three aromatic spacers, 2-thiophenemethylamine (ThMA), 2-thiopheneformamidine (ThFA), and benzylammonium, fluorinated through para substitution (pFBA). Our findings highlight the importance of the local bonding environment between organic spacers and the PbI₆ octahedra. Additionally, we demonstrated the importance of energetic alignment between electronic states on spacing cations and inorganic layers for optoelectronic applications. Furthermore, thermoelectric performance was investigated revealing a preference for p-type ThFA and n-type ThMA and pFBA configurations.

Layered Perovskites BaLnnInnO3n+1 (n = 1, 2) for Electrochemical Applications: A Mini Review

Modern humanity is facing many challenges, such as declining reserves of fossil energy resources and their increasing prices, climate change and an increase in the number of respiratory diseases including COVID-19. This causes an urgent need to create advanced energy materials and technologies to support the sustainable development of renewable energy systems including hydrogen energy. Layered perovskites have many attractions due to their physical and chemical properties. The structure of such compounds contains perovskite layers divided by layers with different frameworks, which provide their properties' features. Proton-conduction layered perovskites open up a novel structural class of protonic conductors, potentially suitable for application in such hydrogen energy devices as protonic ceramic electrolysis cells and protonic ceramic fuel cells. In this mini review, the special features of proton transport in the novel class of proton conductors BaLn_nIn_nO_3n+1 (n = 1, 2) with a layered perovskite structure are observed and general regularities are discussed.

Perovskite LaNiO3/Ag3PO4 heterojunction photocatalyst for the degradation of dyes

Pristine lanthanum nickelate (LaNiO₃), silver phosphate (Ag₃PO₄) and perovskite lanthanum nickelate silver phosphate composites (LaNiO₃/Ag₃PO₄) were prepared using the facile hydrothermal method. Three composites were synthesized by varying the percentage of LaNiO₃ in Ag₃PO₄. The physical properties of as-prepared samples were studied by powder X-ray diffraction (pXRD), Fourier-transform infrared (FT-IR), Scanning electron microscopy (SEM) and Energy-dispersive X-ray (EDX). Among all synthesized photocatalysts, 5%LaNiO₃/Ag₃PO₄ composite has been proved to be an excellent visible light photocatalyst for the degradation of dyes i.e., rhodamine B (RhB) and methyl orange (MO). The photocatalytic activity and stability of Ag₃PO₄ were also enhanced by introducing LaNiO₃ in Ag₃PO₄ heterojunction formation. Complete photodegradation of 50 mg/L of RhB and MO solutions using 25 mg of 5%LaNiO₃/Ag₃PO₄ photocatalyst was observed in just 20 min. Photodegradation of RhB and MO using 5%LaNiO₃/Ag₃PO₄ catalyst follows first-order kinetics with rate constants of 0.213 and 0.1804 min^-1, respectively. Perovskite LaNiO₃/Ag₃PO₄ photocatalyst showed the highest stability up to five cycles. The photodegradation mechanism suggests that the holes ( h ⁺) and superoxide anion radicals O 2   • - plays a main role in the dye degradation of RhB and MO.

A lead-free Cs2ZnCl4 perovskite nanocrystals fluorescent probe for highly selective detection of norfloxacin

The abuse of antibiotics would seriously affect human health and has become of worldwide critical concern, thus it is urgent to develop an environmentally friendly and nontoxic fluorescent probe for antibiotics sensing. In this work, a lead-free Cs₂ZnCl₄ perovskite nanocrystals (PNCs) probe was fabricated for sensing norfloxacin (NOR) employing a modified ligand-assisted reprecipitation method. The prepared Cs₂ZnCl₄ PNCs probe had strong blue emission around 440 nm, and the characteristics of PNCs were systematically characterized by X-ray photoelectric spectroscopy (XPS), Fourier transforms infrared spectroscopy (FTIR), transmission electron microscope (TEM) and powder X-ray diffraction (XRD). The results revealed that the fluorescence intensity of the Cs₂ZnCl₄ PNCs was significantly enhanced after the introduction of norfloxacin. The Cs₂ZnCl₄ PNCs can be used as a fluorescent probe to selectively and sensitively detect norfloxacin in the concentration range from 0.2 to 50.0 μM, with a correlation coefficient (R²) of 0.9954 and the limit of detection (LOD, 3σ) of 0.1499 µM. The preparation and application of a lead-free perovskite fluorescent probe for norfloxacin would promote the application of perovskite fluorescent probes in biochemical assays.

Optimizing the semiconductor–metal-single-atom interaction for photocatalytic reactivity

Metal single-atom (MSA) catalysts with 100% metal atom utilization and unique electronic properties are attractive cocatalysts for efficient photocatalysis when coupled with semiconductors. Owing to the absence of a metal-metal bond, MSA sites are exclusively coordinated with the semiconductor photocatalyst, featuring a chemical-bond-driven tunable interaction between the semiconductor and the metal single atom. This semiconductor-MSA interaction is a platform that can facilitate the separation/transfer of photogenerated charge carriers and promote the subsequent catalytic reactions. In this Review, we first introduce the fundamental physicochemistry related to the semiconductor-MSA interaction. We highlight the ligand effect on the electronic structures, catalytic properties and functional mechanisms of the MSA cocatalyst through the semiconductor-MSA interaction. Then, we categorize the state-of-the-art experimental and theoretical strategies for the construction of the efficient semiconductor-MSA interaction at the atomic scale for a wide range of photocatalytic reactions. The examples described include photocatalytic water splitting, CO₂ reduction and organic synthesis. We end by outlining strategies on how to further advance the semiconductor-MSA interaction for complex photocatalytic reactions involving multiple elementary steps. We provide atomic and electronic-scale insights into the working mechanisms of the semiconductor-MSA interaction and guidance for the design of high-performance semiconductor-MSA interface photocatalytic systems.

Proton Transport in the Gadolinium-Doped Layered Perovskite BaLaInO4

Materials capable for use in energy generation have been actively investigated recently. Thermoelectrics, photovoltaics and electronic/ionic conductors are considered as a part of the modern energy system. Layered perovskites have many attractions, as materials with high conductivity. Gadolinium-doped layered perovskite BaLaInO4 was obtained and investigated for the first time. The high values of conductivity were proved. The composition BaLa0.9Gd0.1InO4 demonstrates predominantly protonic transport under wet air and low temperatures (<400 °C). The doping by rare earth metals of layered perovskite is a prospective method for significantly improving conductivity.

Bias-free solar hydrogen production at 19.8 mA cm-2 using perovskite photocathode and lignocellulosic biomass

Solar hydrogen production is one of the ultimate technologies needed to realize a carbon-neutral, sustainable society. However, an energy-intensive water oxidation half-reaction together with the poor performance of conventional inorganic photocatalysts have been big hurdles for practical solar hydrogen production. Here we present a photoelectrochemical cell with a record high photocurrent density of 19.8 mA cm^-2 for hydrogen production by utilizing a high-performance organic-inorganic halide perovskite as a panchromatic absorber and lignocellulosic biomass as an alternative source of electrons working at lower potentials. In addition, value-added chemicals such as vanillin and acetovanillone are produced via the selective depolymerization of lignin in lignocellulosic biomass while cellulose remains close to intact for further utilization. This study paves the way to improve solar hydrogen productivity and simultaneously realize the effective use of lignocellulosic biomass.

Oxygen Ion and Proton Transport in Alkali-Earth Doped Layered Perovskites Based on BaLa2In2O7

Inorganic materials with layered perovskite structures have a wide range of physical and chemical properties. Layered perovskites based on BaLanInnO3n+1 (n = 1, 2) were recently investigated as protonic conductors. This work focused on the oxygen ion and proton transport (ionic conductivity and mobility) in alkali-earth (Sr2+, Ba2+)-doped layered perovskites based on BaLa2In2O7. It is shown that in the dry air conditions, the nature of conductivity is mixed oxygen–hole, despite the dopant nature. Doping leads to the increase in the conductivity values by up to ~1.5 orders of magnitude. The most proton-conductive BaLa1.7Ba0.3In2O6.85 and BaLa1.7Sr0.15In2O6.925 samples are characterized by the conductivity values 1.2·10−4 S/cm and 0.7·10−4 S/cm at 500 °C under wet air, respectively. The layered perovskites with Ruddlesden-Popper structure, containing two layers of perovskite blocks, are the prospective proton-conducting materials and further material science searches among this class of materials is relevant.

Photocatalytic Water Splitting Promoted by 2D and 3D Porphyrin Covalent Organic Polymers Synthesized by Suzuki-Miyaura Carbon-Carbon Coupling

This work deals with the synthesis of metal-free and porphyrin-based covalent organic polymers (COPs) by the Suzuki-Miyaura coupling carbon-carbon bond forming reaction to study the photocatalytic overall water splitting performance. Apart from using 5,10,15,20-Tetrakis-(4-bromophenyl)porphyrin, we have chosen different cross-linker monomers to induce 2-dimensional (2D) or 3-dimensional (3D) and different rigidity in their resulting polymeric molecular structure. The synthesised COPs were extensively characterised to reveal that the dimensionality and flexibility of the molecular structure play an intense role in the physical, photochemical, and electronic properties of the polymers. Photoinduced excited state of the COPs was evaluated by nanosecond time-resolved laser transient absorption spectroscopy (TAS) by analysing excited state kinetics and quenching experiments, photocurrent density measurements and photocatalytic deposition of Ru³⁺ to RuO_2, and photocatalysis. In summary, TAS experiments demonstrated that the transient excited state of these polymers has two decay kinetics and exhibit strong interaction with water molecules. Moreover, photocurrent and photocatalytic deposition experiments proved that charges are photoinduced and are found across the COP molecular network, but more important charges can migrate from the surface of the COP to the medium. Among the various COPs tested, COP-3 that has a flexible and 3D molecular structure reached the best photocatalytic performances, achieving a photocatalytic yield of 0.4 mmol H₂ × g_COP-3^-1 after 3 h irradiation.

Sn1/3Na2/3Sn(OH)6 Perovskite with Sn4+/Na+ Disorder for Photocatalytic Degradation of 2,4-Dichlorophenol

Cation disorder in hydroxide-based perovskites remains relatively under-researched. In this work, novel hydroxide-based perovskite Sn_1/3Na_2/3Sn(OH)₆ was first fabricated by a direct hydrothermal method, and its ability to photodegrade 2,4-dichlorophenol was evaluated. The synthesized photocatalyst is isostructural with MSn(OH)₆ (M = Mg, Ca, Sr, Mn, Fe, Co, Ni, or Zn), where the M site is occupied by disordered Sn⁴⁺/Na⁺. Sn_1/3Na_2/3Sn(OH)₆ exhibits outstanding photocatalytic activity under ultraviolet light. Specifically, 99% of 2,4-DCP is photodegraded in 40 min, with approximately 94% of its total chlorine content converted to Cl^- anions. Radical trapping experiments indicated that superoxide radical anions (·O₂^-) play a critical role during the photocatalytic process. Finally, liquid chromatography-tandem mass spectrometry was conducted to monitor the photocatalytic intermediates. Overall, our findings demonstrate that hydroxide-based perovskites with cation disorder show promise for application in photocatalysis.

Machine Learning for Electrocatalyst and Photocatalyst Design and Discovery

Electrocatalysts and photocatalysts are key to a sustainable future, generating clean fuels, reducing the impact of global warming, and providing solutions to environmental pollution. Improved processes for catalyst design and a better understanding of electro/photocatalytic processes are essential for improving catalyst effectiveness. Recent advances in data science and artificial intelligence have great potential to accelerate electrocatalysis and photocatalysis research, particularly the rapid exploration of large materials chemistry spaces through machine learning. Here a comprehensive introduction to, and critical review of, machine learning techniques used in electrocatalysis and photocatalysis research are provided. Sources of electro/photocatalyst data and current approaches to representing these materials by mathematical features are described, the most commonly used machine learning methods summarized, and the quality and utility of electro/photocatalyst models evaluated. Illustrations of how machine learning models are applied to novel electro/photocatalyst discovery and used to elucidate electrocatalytic or photocatalytic reaction mechanisms are provided. The review offers a guide for materials scientists on the selection of machine learning methods for electrocatalysis and photocatalysis research. The application of machine learning to catalysis science represents a paradigm shift in the way advanced, next-generation catalysts will be designed and synthesized.

Amplified Spontaneous Emission from Thermally Evaporated High-Quality Thin Films of CsPb(Br1-xYx)3 (Y = I, Cl) Perovskites

As a wavelength-tunable lasing material, perovskites are now generating a lot of scientific attention. Conventional solution-processed CsPbX₃ perovskite films sometimes suffer unavoidable pinhole defects and poor surface morphology, severely limiting their performance on amplified spontaneous emission (ASE) and lasing application. Herein, a thermal evaporation approach is explored in our work to achieve a uniform and high-coverage CsPb(Br_1-xY_x)₃ (Y = I, Cl) perovskites polycrystalline thin film. The ASE of these films was studied using a picosecond laser system. The ASE profile increases rapidly over the narrow peak in relation to the laser pump intensity, confirming the development of stimulated emission. ASE began when the energy density threshold was reached and ranged between 25 and 170 μJ/cm² per pulse for perovskite materials when replacing I with Br and then Cl. This work emphasizes the notable optical properties of high-quality perovskite thin films, leading to possible accessible uses in optoelectronic applications.

Strain Engineering: A Boosting Strategy for Photocatalysis

Whilst the photocatalytic technique is considered to be one of the most significant routes to address the energy crisis and global environmental challenges, the solar-to-chemical conversion efficiency is still far from satisfying practical industrial requirements, which can be traced to the suboptimal bandgap and electronic structure of photocatalysts. Strain engineering is a universal scheme that can finely tailor the bandgap and electronic structure of materials, hence supplying a novel avenue to boost their photocatalytic performance. Accordingly, to explore promising directions for certain breakthroughs in strained photocatalysts, an overview on the recent advances of strain engineering from the basics of strain effect, creations of strained materials, as well as characterizations and simulations of strain level is provided. Besides, the potential applications of strain engineering in photocatalysis are summarized, and a vision for the future controllable-electronic-structure photocatalysts by strain engineering is also given. Finally, perspectives on the challenges for future strain-promoted photocatalysis are discussed, placing emphasis on the creation and decoupling of strain effect, and the modification of theoretical frameworks.

Potential Application of Perovskite Structure for Water Treatment: Effects of Band Gap, Band Edges, and Lifetime of Charge Carrier for Photocatalysis

Perovskite structures have attracted scientific interest as a promising alternative for water treatment due to their unique structural, high oxidation activity, electronic stability, and optical properties. In addition, the photocatalytic activity of perovskite structures is higher than that of many transition metal compounds. A critical property that determines the high-performance photocatalytic and optical properties is the band gap, lifetime of carrier charge, and band edges relative to the redox potential. Thus, the synthesis/processing and study of the effect on the band gap, lifetime of carrier charge, and band edges relative to the redox potential in the development of high-performance photocatalysts for water treatment are critical. This review presents the basic physical principles of optical band gaps, their band gap tunability, potentials, and limitations in the applications for the water treatment. Furthermore, it reports recent advances in the synthesis process and comparatively examines the band gap effect in the photocatalytic response. In addition to the synthesis, the physical mechanisms associated with the change in the band gap have been discussed. Finally, the conclusions of this review, along with the current challenges of perovskites for photocatalysis, are presented.

Halide perovskites and perovskite related materials for particle radiation detection

Radiation detectors are widely used in physics, materials science, chemistry, and biology. Halide perovskites are known for their superior properties including tunable bandgaps and chemical compositions, high defect tolerance, solution-processable synthesis of films and crystals, and high carrier diffusion length. Recently, halide perovskites have attracted enormous interest as particle radiation detectors for both charged (α and β) and uncharged (neutrons) particles. Solid-state detectors based on single crystal perovskites can detect α particles and thermal neutrons with energy-resolved spectra. Halide perovskite scintillators are also able to detect β particles and fast neutrons. In this review, we briefly introduce the fundamentals of radiation detection and summarize the recent progress on halide perovskite detectors for particle radiation.

Encapsulation-Led Adsorption of Neutral Dyes and Complete Photodegradation of Cationic Dyes and Antipsychotic Drugs by Lanthanide-Based Macrocycles

Molecular architectures offering large cavities can accommodate guest molecules, while their compositional engineering allows tunability of the band gap to support photocatalysis using visible light. In this work, two lanthanide (Ln)-based macrocycles, synthesized using a cobalt-based metalloligand and offering large rectangular cavities, exhibited selective adsorption of neutral dyes over both anionic and cationic dyes. Both Ln macrocycles illustrated complete photodegradation of cationic dyes using visible light without the use of any oxidant. Both Ln macrocycles exhibited complete photodegradation of not only cationic dyes but also a few phenothiazine-based antipsychotic drugs. Photocatalysis involved the generation of reactive oxygen species (ROS), which was corroborated with the band gap of two Ln macrocycles. These results were supported by radical scavenger studies and the quantitative estimation of superoxide and hydroxyl radicals. Complete photodegradation of both dyes and drugs was confirmed by spectral studies, while the generation of CO₂ and N₂ gases was established by gas chromatography. Importantly, Ln macrocycles were able to distinguish between the neutral dyes that were quantitatively adsorbed and the cationic dyes/drugs that were completely photodegraded.