On-Surface Fabrication toward Polar 2D Macromolecular Crystals

Polar 2D macromolecular structures have attracted significant attention because of their ferroelectricity and ferro-magnetism. However, it is challenging to synthesize them experimentally because dipoles or spins of these macromolecules tend to cancel each other. So far, there has been no successful strategy for assembling macromolecules in a unidirectional manner, achieving stereoregular polymerization on metal surfaces, and creating polar 2D polymer crystals. Recent progress in molecular assembly, on-surface polymer synthesis, and direct control of molecules using electric field applications provides an opportunity to develop such strategies. In this regard, we first review past studies on chiral and achiral molecular assembly, on-surface polymer synthesis, and orientation control of polar molecules. Then, we discuss our newly developed approach called "vectorial on-surface synthesis", which is based on "dynamic chirality" of compass precursors, stereoselective polymerization, and favorable interchain interactions originating from CH-π interactions. Finally, we conclude with a prospective outlook.

Kinetic control over the chiral-selectivity in the formation of organometallic polymers on a Ag(110) surface

Methods to control chiral-selectivity in molecular reactions through external inputs are of importance, both from a fundamental and technological point of view. Here, the self-assembly of prochiral 6,12-dibromochrysene monomers on Ag(110) is studied using scanning tunneling microscopy. Deposition of the monomers on a substrate held at room temperature leads to the formation of 1D achiral organometallic polymers. When the monomers are instead deposited on a substrate held at 373 K, homochiral organometallic polymers consisting of either the left- or right-handed enantiomer are formed. Post-deposition annealing of room temperature deposited samples at >373 K does not transform the achiral 1D organometallic polymers into homochiral ones and thus, does not yield the same final structure as if depositing onto a substrate held at the same elevated temperature. Furthermore, annealing promotes neither the formation of 1D covalently-coupled polymers nor the formation of graphene nanoribbons. Our results identify substrate temperature as an important factor in on-surface chiral synthesis, thereby demonstrating the importance of considering kinetic effects and the decisive role they can play in structure formation.

On-Surface Two-Dimensional Polymerization: Advances, Challenges, and Prospects

Two-dimensional polymers (2DPs) are molecularly thin networks consisting of monomers covalently linked in at least two directions in the molecular plane. Because of the unique structural features and emergent physicochemical properties, 2DPs promise application potentials in catalysis, chemical sensing, and organic electronic devices. On-surface synthesis is of great interest to fabricate 2DPs with atomic precision, and the properties of the 2DPs can be characterized in situ through scanning probe techniques. In this Perspective, we first introduce the recent developments of on-surface 2D polymerization, including the design principle, the synthetic reactions, and the factors affecting the synthesis of 2DPs on surface. Then, we summarize some major challenges in this field, including the fabrication of high-quality 2DPs and the study of the intrinsic electronic properties of 2DPs, and we discuss some of the available solutions to address these issues.

On-Surface Synthesis of Self-Assembled Covalently Linked Wavy Chains with Site-Selective Conformational Switching

Conformational arrangements in polymers on surfaces determine the overall shape as well as the potential properties. It is generally believed that conformational diversity leads to uncontrollable or disordered structures in on-surface synthesis. However, in this study, we obtain two well-ordered self-assembled covalently linked wavy chains with site-selective conformational switching via the Ullmann reaction of 1,2-bis(3-bromophenyl)ethane with multiple conformations on Ag(111). Two kinds of wavy chains exhibit distinct conformational arrangements, where chain I contains one repeating unit conformation of -cis-trans1-cis-trans1-cis-cis-trans1-, while the adjacent parallel parts in wavy chain II have two different conformational arrangements of -cis-cis-trans1- and -cis-cis-trans2-. Wavy chains coassemble with dissociated bromine atoms, suggesting that the Br···H-C interactions between Br atoms and molecular chains are crucial for the construction of ordered wavy chains. High-resolution scanning tunneling microscopy is employed to reveal the surface reaction process at the molecular scale. In depth growth mechanism analysis combined with density functional theory calculations unveils that the substrate also plays an important role in the fabrication of well-ordered wavy chains. The present work extends the surface reaction of conformational flexible precursors.

Molecular insight into on-surface chemistry of an organometallic polymer

A molecular investigation of Cu-elimination and subsequent C-C coupling of DCTP (4,4''-dichloro-1,1':3',1''-terphenyl)-Cu organometallic (OM) polymers on Cu(111) is conducted by scanning tunneling microscopy and spectroscopy, revealing that the Cu adatoms embedded in the DCTP-Cu chains are located at the hollow and bridge sites on the Cu(111) surface. The difference in the catalytic activities of these surface sites leads to stepwise elimination of Cu adatoms in the OM chains. Moreover, the interchain interaction plays an important role in the Cu-elimination process of the DCTP-Cu chains as well. The interchain steric hindrance, on the one hand, induces the formation of Cu-eliminated intermediates that are scarcely observed in other Ullmann coupling systems, and on the other hand, promotes the cooperative Cu-elimination and C-C coupling of the OM segments in neighboring chains. These findings demonstrate the key role of the molecule-substrate and intermolecular interactions in mediating the reaction processes of the extended molecular systems on the surface.

Surface-Assisted Synthesis of N-Containing π-Conjugated Polymers

On-surface synthesis has recently emerged as a powerful strategy to design conjugated polymers previously precluded in conventional solution chemistry. Here, an N-containing pentacene-based precursor (tetraazapentacene) is ex-professo synthesized endowed with terminal dibromomethylene (:CBr₂ ) groups to steer homocoupling via dehalogenation on metallic supports. Combined scanning probe microscopy investigations complemented by theoretical calculations reveal how the substrate selection drives different reaction mechanisms. On Ag(111) the dissociation of bromine atoms at room temperature triggers the homocoupling of tetraazapentacene units together with the binding of silver adatoms to the nitrogen atoms of the monomers giving rise to a N-containing conjugated coordination polymer (P1). Subsequently, P1 undergoes ladderization at 200 °C, affording a pyrrolopyrrole-bridged conjugated polymer (P2). On Au(111) the formation of the intermediate polymer P1 is not observed and, instead, after annealing at 100 °C, the conjugated ladder polymer P2 is obtained, revealing the crucial role of metal adatoms on Ag(111) as compared to Au(111). Finally, on Ag(100) the loss of :CBr2 groups affords the formation of tetraazapentacene monomers, which coexist with polymer P1. Our results contribute to introduce protocols for the synthesis of N-containing conjugated polymers, illustrating the selective role of the metallic support in the underlying reaction mechanisms.

On-Surface Synthesis of Polypyridine: Strain Enforces Extended Linear Chains

Strain-induced on-surface transformations provide an appealing route to steer the selectivity towards desired products. Here, we demonstrate the selective on-surface synthesis of extended all-trans poly(2,6-pyridine) chains on Au(111). By combining high-resolution scanning tunneling and atomic force microscopy, we revealed the detailed chemical structure of the reaction products. Density functional theory calculations indicate that the synthesis of extended covalent structures is energetically favored over the formation of macrocycles, due to the minimization of internal strain. Our results consolidate the exploitation of internal strain relief as a driving force to promote selective on-surface reactions.

Surface-assisted fabrication of low-dimensional carbon-based nanoarchitectures

On-surface synthesis, as an alternative to traditional in-solution synthesis, has become an emerging research field and attracted extensive attention over the past decade due to its ability to fabricate nanoarchitectures with exotic properties. Compared to wet chemistry, the on-surface synthesis conducted on atomically flat solid surfaces under ultrahigh vacuum exhibits unprecedented characteristics and advantages, opening novel reaction pathways for chemical synthesis. Various low-dimensional nanostructures have been fabricated on solid surfaces (mostly metal surfaces) based on this newly developed approach. This paper reviews the classic and latest works regarding carbon-based low-dimensional nanostructures since the arrival of on-surface synthesis era. These nanostructures are categorized into zero-, one- and two-dimensional classes and each class is composed of numerous sub-nanostructures. For certain specific nanostructures, comprehensive reports are given, including precursor design, substrate choice, synthetic strategies and so forth. We hope that our review will shed light on the fabrication of some significant nanostructures in this young and promising scientific area.

The Macrocycle versus Chain Competition in On-Surface Polymerization: Insights from Reactions of 1,3-Dibromoazulene on Cu(111)

Ring/chain competition in oligomerization reactions represents a long‐standing topic of synthetic chemistry and was treated extensively for solution reactions but is not well‐understood for the two‐dimensional confinement of surface reactions. Here, the kinetic and thermodynamic principles of ring/chain competition in on‐surface synthesis are addressed by scanning tunneling microscopy, X‐ray photoelectron spectroscopy, and Monte Carlo simulations applied to azulene‐based organometallic oligomers on Cu(111). Analysis of experiments and simulations reveals how the ring/chain ratio can be controlled through variation of coverage and temperature. At room temperature, non‐equilibrium conditions prevail and kinetic control leads to preferential formation of the entropically favored chains. In contrast, high‐temperature equilibrium conditions are associated with thermodynamic control, resulting in increased yields of the energetically favored rings. The optimum conditions for ring formation include the lowest possible temperature within the regime of thermodynamic control and a low coverage. The general implications are discussed and compared to the solution case.

Theoretical Modeling of the Surface-Guided Self-Assembly of Functional Molecules

Directing the self-assembly of organic building blocks with 2D templates has been a promising method to create molecular superstructures having unique physicochemical properties. In this work the on-surface self-assembly of simple ditopic functional molecules confined inside periodic nanotemplates was modeled by means of the lattice Monte Carlo simulation method. Two types of confinement, that is honeycomb porous networks and parallel grooves of controlled diameter and width were used in the calculations. Additionally, the effect of (pro)chirality of the adsorbing molecules on the outcome of the templated self-assembly was examined. To that end, enantiopure and racemic assemblies were studied and the resulting structures were identified and classified. The obtained findings demonstrated that suitable tuning of the structural parameters of the templates enables directing the self-assembly towards linear and cyclic aggregates with controlled size. Moreover, chiral resolution of the molecular conformers using honeycomb networks with adjusted pore size was found possible. Our theoretical predictions can be helpful in designing structured surfaces to direct self-assembly and polymerization of organic functional building blocks.

Impact of the reaction pathway on the final product in on-surface synthesis

On-surface synthesis provides a very promising strategy for creating stable functional structures on surfaces. In the past, classical reactions known from solution synthesis have been successfully transferred onto a surface. Due to the presence of the surface, on-surface synthesis provides the potential of directing the reaction pathway in a manner that might not be accessible in classical solution synthesis. In this work, we present evidence for an acetylene polymerization from a terminal alkyne monomer deposited onto calcite (10.4). Strikingly, although the dimer forms on the surface as well, we find no indication for diacetylene polymerization. This is in sharp contrast to what is observed when directly depositing the dimers on the surface. The different pathways are linked to the specific arrangement of the dimers on the surface. When forming stripes along the [-4-21] direction, the diacetylene polymerization is prohibited, while when arranged in stripes aligned along the [010] direction, the dimers can undergo diacetylene polymerization. Our work thus constitutes a demonstration for controlling the specific reaction pathway in on-surface synthesis by the presence of the surface.

Dissymmetric On-Surface Dehalogenation Reaction Steered by Preformed Self-Assembled Structure

Ullmann coupling of 4,4″-dibromo-p-terphenyl (DBTP) thermally catalyzed on a Ag(111) surface was studied by scanning tunneling microscopy. Detailed experimental measurement shows that the Ullmann coupling reaction pathways of DBTP molecules can be controlled by pre-self-assembly, and the dissymmetric dehalogenation reaction is realized. Moreover, self-assembly of the reactants in a rectangular network undergoes a dissymmetric debromination transfer to a newly observed rhombic network formed by organometallic dimers prior to the formation of longer symmetric organometallic intermediates on a Ag(111) surface, while the ladder assembled phase is more likely to induce the symmetric debromination reaction and converts into the symmetric organometallic intermediate. These findings help us to understand the essentials of the dissymmetric dehalogenation reaction that originated from a symmetric compound and pave new avenues for advancing the emerging field of on-surface synthesis.

On-Surface Synthesis within a Porphyrin Nanoring Template

On-surface synthesis provides a route for the production of 1D and 2D covalently bonded polymeric structures. Such reactions are confined to the surface of a substrate and the catalytic properties of the substrate are often utilised to initiate the reaction. Recent studies have focused on the properties of various crystallographic planes of metallic substrates, as well as native surface features such as step-edges, in an effort to provide control over the pathway of the reaction and the resultant products. An alternative approach is to template the catalytic surface with a porous molecular overlayer; giving rise to well-defined surface regions within which an on-surface reaction may be confined. Here we present a methodology where macromolecular templates are used to confine an on-surface reaction. Cyclic porphyrin polymers, nanorings - consisting of 40 porphyrin units with internal diameter 13 nm, are used to form a template on a Au(111) surface, and an on-surface Ullmann-type coupling reaction is initiated within the nanoring template. The surface confined template and covalently coupled reaction products are investigated and characterised with scanning tunnelling microscopy.

On-Surface Synthesis of One-Dimensional Carbon-Based Nanostructures via C-X and C-H Activation Reactions

The past decades have witnessed the emergence of low-dimensional carbon-based nanostructures owing to their unique properties and various subsequent applications. It is of fundamental importance to explore ways to achieve atomically precise fabrication of these interesting structures. The newly developed on-surface synthesis approach provides an efficient strategy for this challenging issue, demonstrating the potential of atomically precise preparation of low-dimensional nanostructures. Up to now, the formation of various surface nanostructures, especially carbon-based ones, such as graphene nanoribbons (GNRs), kinds of organic (organometallic) chains and films, have been achieved via on-surface synthesis strategy, in which in-depth understanding of the reaction mechanism has also been explored. This review article will provide a general overview on the formation of one-dimensional carbon-based nanostructures via on-surface synthesis method. In this review, only a part of the on-surface chemical reactions (specifically, C-X (X=Cl, Br, I) and C-H activation reactions) under ultra-high vacuum conditions will be covered.

Balancing Noncovalent Interactions in the Self-Assembly of Nonplanar Aromatic Carboxylic Acid MOF Linkers at the Solution/Solid Interface: HOPG vs Au(111)

This study explores directed noncovalent bonding in the self-assembly of nonplanar aromatic carboxylic acids on gold and graphite surfaces. It is the first step in developing a new design strategy to create two-dimensional surface metal-organic frameworks (SURFMOFs). The acid molecules used are tetraphenylethene-based and are typically employed in the synthesis of three-dimensional (3D) MOF crystalline solids. They include tetraphenylethene tetracarboxylic acid, tetraphenylethene bisphenyl carboxylic acid, and tetraphenylethene tetrakis-phenyl carboxylic acid. The two-dimensional structures formed from these molecules on highly ordered pyrolytic graphite (HOPG) and Au(111) are studied by scanning tunneling microscopy in a solution environment. The process of monolayer formation and final surface linker structures are found to be strongly dependent on the combination of the molecule and substrate used and are discussed in terms of intermolecular and molecule-substrate interactions, bonding geometry, and symmetry of the acid molecules. In the case of linker self-assembly on HOPG, the molecule-substrate interactions play a significant role in the resulting surface structure. When the acid molecules are adsorbed on Au(111), the intermolecular interactions tend to dominate over the weaker molecule-substrate bonding. Additionally, the interplay of π-π interactions and hydrogen bonding that directs the surface self-assembly on different supports can be modified by varying the linker concentration. This is particularly applicable for the case of the acid molecules adsorbing on the Au(111) substrate. Precise control over predesigned surface structures and orientation of the nonplanar aromatic carboxylic linkers open up an exciting prospect for manipulating the direction of SURFMOF growth in two dimensions and potentially in 3D.

Controlling a Chemical Coupling Reaction on a Surface: Tools and Strategies for On-Surface Synthesis

On-surface synthesis is appearing as an extremely promising research field aimed at creating new organic materials. A large number of chemical reactions have been successfully demonstrated to take place directly on surfaces through unusual reaction mechanisms. In some cases the reaction conditions can be properly tuned to steer the formation of the reaction products. It is thus possible to control the initiation step of the reaction and its degree of advancement (the kinetics, the reaction yield); the nature of the reaction products (selectivity control, particularly in the case of competing processes); as well as the structure, position, and orientation of the covalent compounds, or the quality of the as-formed networks in terms of order and extension. The aim of our review is thus to provide an extensive description of all tools and strategies reported to date and to put them into perspective. We specifically define the different approaches available and group them into a few general categories. In the last part, we demonstrate the effective maturation of the on-surface synthesis field by reporting systems that are getting closer to application-relevant levels thanks to the use of advanced control strategies.

Remote functionalization in surface-assisted dehalogenation by conformational mechanics: organometallic self-assembly of 3,3',5,5'-tetrabromo-2,2',4,4',6,6'-hexafluorobiphenyl on Ag(111)

Even though the surface-assisted dehalogenative coupling constitutes the most abundant protocol in on-surface synthesis, its full potential will only become visible if selectivity issues with polybrominated precursors are comprehensively understood, opening new venues for both organometallic self-assembly and on-surface polymerization. Using the 3,3',5,5'-tetrabromo-2,2',4,4',6,6'-hexafluorobiphenyl (Br4F6BP) at Ag(111), we demonstrate a remote site-selective functionalization at room temperature and a marked temperature difference in double- vs. quadruple activation, both phenomena caused by conformational mechanical effects of the precursor-surface ensemble. The submolecularly resolved structural characterization was achieved by Scanning Tunneling Microscopy, the chemical state was quantitatively assessed by X-ray Photoelectron Spectroscopy, and the analysis of the experimental signatures was supported through first-principles Density-Functional Theory calculations. The non-planarity of the various structures at the surface was specifically probed by additional Near Edge X-ray Absorption Fine Structure experiments. Upon progressive heating, Br4F6BP on Ag(111) shows the following unprecedented phenomena: (1) formation of regular organometallic 1D chains via remote site-selective 3,5'-didebromination; (2) a marked temperature difference in double- vs. quadruple activation; (3) an organometallic self-assembly based on reversibility of C-Ag-C linkages with a thus far unknown polymorphism affording both hexagonal and rectangular 2D networks; (4) extraordinary thermal stability of the organometallic networks. Controlled covalent coupling at the previously Br-functionalized sites was not achieved for the Br4F6BP precursor, in contrast to the comparatively studied non-fluorinated analogue.

Organometallic ring vs. chain formation beyond kinetic control: steering their equilibrium in two-dimensional confinement

Two-dimensional confinement enables thermodynamic control over the competition between macrocycle and chain formation.

An On-Surface Reaction Confined within a Porous Molecular Template

On-surface reactions based on metal-catalysed Ullmann coupling have been successfully employed to synthesise a wide variety of covalently coupled structures. Substrate chemistry and topology are both known to effect the progression of an on-surface reaction; offering routes to control efficiency and selectivity. Here, we detail ultra-high vacuum scanning probe microscopy experiments showing that templating a catalytically active surface, via a supramolecular template, influences the reaction pathway of an on-surface Ullmann-type coupling reaction by inhibiting one potential intermediate structure and stabilising another.

Ullmann Coupling Reactions on Ag(111) and Ag(110); Substrate Influence on the Formation of Covalently Coupled Products and Intermediate Metal-Organic Structures

On-surface reactions based on Ullmann coupling are known to proceed on coinage-metal substrates (e.g. Au, Ag, Cu), with the chemistry of the surface strongly influencing the reaction progression. In addition, the topography of the surface may be expected to affect the local adsorption geometry of the reactants as well as the intermediate and final structures. Here, we investigate the effect of two different surface facets of silver, Ag(111) and Ag(110) on the formation of organometallic and covalent structures for Ullmann-type coupling reactions. Deposition of 4,4”-diiodo-m-terphenyl molecules onto either Ag(111) or Ag(110) surfaces leads to the scission of C-I bonds followed by the formation of organometallic zigzag structures, consisting of molecules connected by coordination bonds to Ag adatoms. The covalently coupled product is formed by annealing each surface, leading to the removal of Ag atoms and the formation of covalently bonded zigzag poly(m-phenylene) structures. Comparisons of the adsorption model of molecules on each surface before and after annealing reveal that on Ag(111), structures rearrange by rotation and elongation of bonds in order to become commensurate with the surface, whereas for the Ag(110) surface, the similarity in adsorption geometry of the intermediate and final states means that no rotation is required.

On-Surface Pseudo-High-Dilution Synthesis of Macrocycles: Principle and Mechanism

Macrocycles have attracted much attention due to their specific "endless" topology, which results in extraordinary properties compared to related linear (open-chain) molecules. However, challenges still remain in their controlled synthesis with well-defined constitution and geometry. Here, we report the successful application of the (pseudo-)high-dilution method to the conditions of on-surface synthesis in ultrahigh vacuum. This approach leads to high yields (up to 84%) of cyclic hyperbenzene ([18]-honeycombene) via an Ullmann-type reaction from 4,4″-dibromo-meta-terphenyl (DMTP) as precursor on a Ag(111) surface. The mechanism of macrocycle formation was explored in detail using scanning tunneling microscopy and X-ray photoemission spectroscopy. We propose that the dominant pathway for hyperbenzene (MTP)₆ formation is the stepwise desilverization of an organometallic (MTP-Ag)₆ macrocycle, which forms via cyclization of (MTP-Ag)₆ chains under pseudo-high-dilution conditions. The high probability of cyclization on the stage of the organometallic phase results from the reversibility of the C-Ag bond. The case is different from that in solution, in which cyclization typically occurs on the stage of a covalently bonded open-chain precursor. This difference in the cyclization mechanism on a surface compared to that in solution stems mainly from the 2D confinement exerted by the surface template, which hinders the flipping of chain segments necessary for cyclization.

Highly Selective Synthesis of cis-Enediynes on a Ag(111) Surface

Cis-enediyne-type compounds have received much attention as potent antitumor antibiotics. The conventional synthesis of cis-enediynes in solution typically involves multiple steps and various side reactions. For the first time, selective one-step synthesis of cis-enediyne from a single reactant is reported on a Ag(111) surface with a yield up to 90 %. High selectivity for the formation of cis-enediyne originates from the steric effect posed by weak intermolecular interactions, which protect the cis-enediyne from further reaction. A series of comparative experiments and DFT-based transition-state calculations support the findings. The described synthetic approach for directing reaction pathways on-surface may illuminate potential syntheses of other unstable organic compounds.