Recent developments in reversible photoregulation of oligonucleotide structure and function

Deciphering the shape selective conformational equilibrium of E- and Z-locked azobenzene-tetraethylammonium ion in regulating photo-switchable K+-ion channel blocking

The search for photo-switchable optopharmacological agents that can block ion channels has been a prevalent area owing to its prime advantages of reversibility and specificity over the traditional blockers. However, the quest for a higher blocking ability shown by a less stable photo-isomer to perfectly suit the requirement of the optopharmacological agents is still ongoing. To date, only a marginal improvement in terms of blocking ability is observed by the less stable E-isomer of para-substituted locked azobenzene with TEA (LAB-TEA) for the K+-ion channel. Thus, rationalization of the limitation for achieving high activity by the E-isomer is rather essential to aid the improvement of the efficiency of photoswitchable blocker drugs. Herein, we report a molecular-level analysis on the mechanism of blocking by E- and Z-LAB-TEA with the bacterial KcsA K+-ion channel using Molecular Dynamics (MD) simulation and Quantum Mechanical (QM) calculations. The positively charged TEA fragment engages in stronger electrostatic interactions, while the neutral LAB fragment engages in weaker dispersive interactions. The binding free energy calculated by Molecular Mechanics Poisson-Boltzmann Surface Area (MMPBSA) for E-LAB-TEA (-22.3 kcal mol-1) shows less thermodynamic preference for binding with K+-ion channels than Z-LAB-TEA (-21.6 kcal mol-1) corroborating the experimental observation. The correlation between the structure and the binding ability of E- and Z-isomers of LAB-TEA indicates that the channel gate is narrow and acts as a bottleneck for the entry of the binder molecule inside the large cavity. Upon irradiation, the Z-isomer converts into a less stable but long and planar E-isomer (ΔE of photoisomerism = 7.0 kcal mol-1, at SA2-CASPT2(6,4)/6-31+G(d)//CASSCF(6,4)/6-31+G(d)), which is structurally more suitable to fit into the narrow channel gate rather than the curved and non-planar Z-LAB-TEA. Thus, a reduction in the ionic current is observed owing to the preferential entry and subsequent blocking by E-LAB-TEA. Discontinuing the irradiation leads to conversion to the Z-isomer, the curved nature of which hinders its spontaneous release outside the cavity, thereby contributing only a small increase in the ionic current.

Radiation-Induced Molecular Processes in DNA: A Perspective on Gas-Phase Interaction Studies

Studying the direct effects of DNA irradiation is essential for understanding the impact of radiation on biological systems. Gas-phase interactions are especially well suited to uncover the molecular mechanisms underlying these direct effects. Only relatively recently, isolated DNA oligonucleotides were irradiated by ionizing particles such as VUV or X-ray photons or ion beams, and ionic products were analyzed by mass spectrometry. This article provides a comprehensive review of primarily experimental investigations in this field over the past decade, emphasizing the description of processes such as ionization, fragmentation, charge and hydrogen transfer triggered by photoabsorption or ion collision, and the recent progress made thanks to specific atomic photoabsorption. Then, we outline ongoing experimental developments notably involving ion-mobility spectrometry, crossed beams or time-resolved measurements. The discussion extends to potential research directions for the future.

Photoresponsive heparin ionic complexes toward controllable therapeutic efficacy of anticoagulation

Controllable heparin-release is of great importance and necessity for the precise anticoagulant regulation. Efforts have been made on designing heparin-releasing systems, while, it remains a great challenge for gaining the external-stimuli responsive heparin-release in either intravenous or catheter delivery. In this study, an azobenzene-containing ammonium surfactant is designed and synthesized for the fabrication of photoresponsive heparin ionic complexes through the electrostatic complexation with heparin. Under the assistance of photoinduced trans-cis isomerization of azobenzene, the obtained heparin materials perform reversible athermal phase transition between ordered crystalline and isotropic liquid state at room temperature. Compared to the ordered state, the formation of isotropic state can effectively improve the dissolving of heparin from ionic materials in aqueous condition, which realizes the photo-modulation on the concentration of free heparin molecules. With good biocompatibility, such a heparin-releasing system addresses photoresponsive anticoagulation in both in vitro and in vivo biological studies, confirming its great potential clinical values. This work provides a new designing strategy for gaining anticoagulant regulation by light, also opening new opportunities for the development of photoresponsive drugs and biomedical materials based on biomolecules.

ATP/azobenzene-guanidinium self-assembly into fluorescent and multi-stimuli-responsive supramolecular aggregates

Building stimuli-responsive supramolecular systems is a way for chemists to achieve spatio-temporal control over complex systems as well as a promising strategy for applications ranging from sensing to drug-delivery. For its large spectrum of biological and biomedical implications, adenosine 5'-triphosphate (ATP) is a particularly interesting target for such a purpose but photoresponsive ATP-based systems have mainly been relying on covalent modification of ATP. Here, we show that simply mixing ATP with AzoDiGua, an azobenzene-guanidium compound with photodependent nucleotide binding affinity, results in the spontaneous self-assembly of the two non-fluorescent compounds into photoreversible, micrometer-sized and fluorescent aggregates. Obtained in water at room temperature and physiological pH, these supramolecular structures are dynamic and respond to several chemical, physical and biological stimuli. The presence of azobenzene allows a fast and photoreversible control of their assembly. ATP chelating properties to metal dications enable ion-triggered disassembly and fluorescence control with valence-selectivity. Finally, the supramolecular aggregates are disassembled by alkaline phosphatase in a few minutes at room temperature, resulting in enzymatic control of fluorescence. These results highlight the interest of using a photoswitchable nucleotide binding partner as a self-assembly brick to build highly responsive supramolecular entities involving biological targets without the need to covalently modify them.

Recent Advances in Photoswitchable Fluorescent and Colorimetric Probes

In recent years, significant advancements have been made in the research of photoswitchable probes. These probes undergo reversible structural and electronic changes upon light exposure, thus exhibiting vast potential in molecular detection, biological imaging, material science, and information storage. Through precisely engineered molecular structures, the photoswitchable probes can toggle between "on" and "off" states at specific wavelengths, enabling highly sensitive and selective detection of targeted analytes. This review systematically presents photoswitchable fluorescent and colorimetric probes built on various molecular photoswitches, primarily focusing on the types involving photoswitching in their detection and/or signal response processes. It begins with an analysis of various molecular photoswitches, including their photophysical properties, photoisomerization and photochromic mechanisms, and fundamental design concepts for constructing photoswitchable probes. The article then elaborates on the applications of these probes in detecting diverse targets, including cations, anions, small molecules, and biomacromolecules. Finally, it offers perspectives on the current state and future development of photoswitchable probes. This review aims to provide a clear introduction for researchers in the field and guidance for the design and application of new, efficient fluorescent and colorimetric probes.

RNA Control via Redox-Responsive Acylation

Incorporating stimuli-responsive components into RNA constructs provides precise spatiotemporal control over RNA structures and functions. Despite considerable advancements, the utilization of redox-responsive stimuli for the activation of caged RNAs remains scarce. In this context, we present a novel strategy that leverages post-synthetic acylation coupled with redox-responsive chemistry to exert control over RNA. To achieve this, we design and synthesize a series of acylating reagents specifically tailored for introducing disulfide-containing acyl adducts into the 2'-OH groups of RNA ("cloaking"). Our data reveal that these acyl moieties can be readily appended, effectively blocking RNA catalytic activity and folding. We also demonstrate the traceless release and reactivation of caged RNAs ("uncloaking") through reducing stimuli. By employing this strategy, RNA exhibits rapid cellular uptake, effective distribution and activation in the cytosol without lysosomal entrapment. We anticipate that our methodology will be accessible to laboratories engaged in RNA biology and holds promise as a versatile platform for RNA-based applications.

All-visible-light-driven stiff-stilbene photoswitches

Molecular photoswitches are potent tools to construct dynamic functional systems and responsive materials that can be controlled in a non-invasive manner. As P-type photoswitches, stiff-stilbenes attract increasing interest, owing to their superiority in quantum yield, significant geometric differences between isomers, excellent thermostability and robust switching behavior. Nevertheless, the UV-light-triggered photoisomerization of stiff-stilbenes has been a main drawback for decades as UV light is potentially harmful and has low penetration depth. Here, we provided a series of para-formylated stiff-stilbenes by Rieche ortho-formylation to achieve all-visible-light-responsiveness. Additional phenolic groups provide access to late-stage chemical modification facilitating design of molecules responsive to visible light. Remarkably, the photoisomerization of aldehyde-appended stiff-stilbenes could be fully manipulated using visible light, accompanied by a high photostationary state (PSS) distribution. These features render them excellent candidates for future visible-light-controllable smart materials and dynamic systems.

DNA liquid crystals with AIE effect toward humidity-indicating biomaterials

In this study, by fabricating DNA doped with tetraphenylethene-containing ammonium surfactant, the resulting solvent-free DNA ionic complex could undergo a humidity-induced phase change that could be well tracked by the fluorescence signal of the surfactant. Taking advantage of the humidity-induced change in fluorescence, the reported ionic DNA complex could accurately indicate the humidity in real time.

Control of Photoisomerization Kinetics via Multistage Switching in Bimetallic Ru(II)-Terpyridine Complexes

In this study, we carried out detailed experimental and theoretical investigation on photophysical, electrochemical, and photoisomerization behaviors of a new array of luminescent binuclear Ru(II) complexes derived from a phenylene-vinylene-substituted terpyridyl ligand possessing RT lifetimes within 60.3-410.5 ns. The complexes experienced trans-to-cis isomerization in MeCN on irradiation with visible light, accompanied by significant changes in their absorption and emission spectral profiles. The reverse cis-to-trans process is also possible with the use of ultraviolet (UV) light. On conversion from trans to cis isomers, the emission intensity increases substantially, while for the reverse process, luminescence quenching occurs. Thus, "off-on" and "on-off" emission switching is facilitated upon treatment with visible and UV light alternatively. By the use of chemical oxidants (ceric ammonium nitrate and potassium permanganate) and reductants (metallic sodium) as well as light of appropriate wavelengths, multistate switching phenomena involving reversible oxidation-reduction and trans-cis isomerization have been achieved. Interestingly, the rate of this multistate photoswitching process becomes much faster compared to only two-state trans-cis isomerization of these complexes. Density functional theory (DFT) and time-dependent-DFT (TD-DFT) calculations are also performed to obtain a clear picture of the electronic environment of the complexes and also for the appropriate assignment of absorption and emission spectral bands.

Site-Selective Photo-Crosslinking of Stilbene Pairs in a DNA Duplex Mediated by Ruthenium Photocatalyst

We herein report a method for site-selective photo-crosslinking of a DNA duplex. A stilbene pair was introduced into a DNA duplex and a ruthenium complex was conjugated with a triplex-forming oligonucleotide. We demonstrated that [2+2] photocycloaddition of the stilbene pair occurred upon irradiation with visible light when the ruthenium complex was in close proximity due to triplex formation. No reaction occurred when the ruthenium complex was not in proximity to the stilbene pair. The wavelength of visible light used was of lower energy than the wavelength of UV light necessary for direct excitation of stilbene. Quantum chemical calculation indicated that ruthenium complex catalyzed the photocycloaddition via triplet-triplet energy transfer. Site selectivity of this photo-crosslinking system was evaluated using a DNA duplex bearing two stilbene pairs as a substrate; we showed that the site of crosslinking was precisely regulated by the sequence of the oligonucleotide linked to the ruthenium complex. Since this method does not require orthogonal photoresponsive molecules, it will be useful in construction of complex photoresponsive DNA circuits, nanodevices and biological tools.

Phototriggered Equilibrated and Transient Orthogonally Operating Constitutional Dynamic Networks Guiding Biocatalytic Cascades

The photochemical deprotection of structurally engineered o-nitrobenzylphosphate-caged hairpin nucleic acids is introduced as a versatile method to evolve constitutional dynamic networks, CDNs. The photogenerated CDNs, in the presence of fuel strands, interact with auxiliary CDNs, resulting in their dynamically equilibrated reconfiguration. By modification of the constituents associated with the auxiliary CDNs with glucose oxidase (GOx)/horseradish peroxidase (HRP) or the lactate dehydrogenase (LDH)/nicotinamide adenine dinucleotide (NAD+) cofactor, the photogenerated CDN drives the orthogonal operation upregulated/downregulated operation of the GOx/HRP and LDH/NAD+ biocatalytic cascade in the conjugate mixture of auxiliary CDNs. Also, the photogenerated CDN was applied to control the reconfiguration of coupled CDNs, leading to upregulated/downregulated formation of the antithrombin aptamer units, resulting in the dictated inhibition of thrombin activity (fibrinogen coagulation). Moreover, a reaction module consisting of GOx/HRP-modified o-nitrobenzyl phosphate-caged DNA hairpins, photoresponsive caged auxiliary duplexes, and nickase leads upon irradiation to the emergence of a transient, dissipative CDN activating in the presence of two alternate auxiliary triggers, achieving transient operation of up- and downregulated GOx/HRP biocatalytic cascades.

Photochromic biomaterials: Synthesis and fluorescence properties of spiroxanthenes-grafted alginate derivatives

Herein, we reported a general and green synthetic strategy for photochromic functional alginate derivatives grafting with isoindolinone spiroxanthenes. Under mild condition, diverse 2-aminoalkyl isoindolinone spiroxanthene derivatives have been prepared from organic photochromic isobenzofuranone spiroxanthenes (including rhodamine B, rhodamine 6G and fluorescein), and grafted on alginate chains through amidation reaction using diamine as a linkage with water as a green solvent at room temperature. The photochromic properties of the fluorophores-modified polymers and the effect of pH value have been explored. Under acid conditions, the spiroisoindolinone rings of alginate derivatives are opened resulting in showing absorption bands and fluorescence with orange to green emission, while the alginate derivatives turned to colourless under basic conditions which is reversibly. In addition to biodegradability and biocompatibility, the polymers exhibit good film-forming properties simultaneously. The films and fibers produced from the alginate derivatives also project good fluorescence properties.

Photochromic Nucleosides and Oligonucleotides

Photochromism is a reversible phenomenon wherein a material undergoes a change in color upon exposure to light. In organic photochromes, this effect often results from light-induced isomerization reactions, leading to alterations in either the spatial orientation or electronic properties of the photochrome. The incorporation of photochromic moieties into biomolecules, such as proteins or nucleic acids, has become a prevalent approach to render these biomolecules responsive to light stimuli. Utilizing light as a trigger for the manipulation of biomolecular structure and function offers numerous advantages compared to other stimuli, such as chemical or electrical treatments, due to its non-invasive nature. Consequently, light proves particularly advantageous in cellular and tissue applications. In this review, we emphasize recent advancements in the field of photochromic nucleosides and oligonucleotides. We provide an overview of the design principles of different classes of photochromes, synthetic strategies, critical analytical challenges, as well as structure-property relationships. The applications of photochromic nucleic acid derivatives encompass diverse domains, ranging from the precise photoregulation of gene expression to the controlled modulation of the three-dimensional structures of oligonucleotides and the development of DNA-based fluorescence modulators. Moreover, we present a future perspective on potential modifications and applications.

Visible Light Control over the Cytolytic Activity of a Toxic Pore-Forming Protein

Enabling control over the bioactivity of proteins with light, along with the principles of photopharmacology, has the potential to generate safe and targeted medical treatments. Installing light sensitivity in a protein can be achieved through its covalent modification with a molecular photoswitch. The general challenge in this approach is the need for the use of low energy visible light for the regulation of bioactivity. In this study, we report visible light control over the cytolytic activity of a protein. A water-soluble visible-light-operated tetra-ortho-fluoro-azobenzene photoswitch was synthesized by utilizing the nucleophilic aromatic substitution reaction for installing a solubilizing sulfonate group onto the electron-poor photoswitch structure. The azobenzene was attached to two cysteine mutants of the pore-forming protein fragaceatoxin C (FraC), and their respective activities were evaluated on red blood cells. For both mutants, the green-light-irradiated sample, containing predominantly the cis-azobenzene isomer, was more active compared to the blue-light-irradiated sample. Ultimately, the same modulation of the cytolytic activity pattern was observed toward a hypopharyngeal squamous cell carcinoma. These results constitute the first case of using low energy visible light to control the biological activity of a toxic protein.

Phenolylazoindole scaffold for facilely synthesized and bis-functional photoswitches combining controllable fluorescence and antifungal properties using theoretical methods

Functionalization is a major challenge for the application of photoswitches. With the aim to develop novel bis-functional azo photoswitches with stationary photophysical properties, a series of phenolylazoindole derivatives were designed, synthesized, and characterized via NMR spectroscopy studies and high-resolution mass spectrometry (HRMS). Herein, UV/Vis and 1H NMR spectra revealed that the photostationary state (PSS) proportions for PSScis and PSStrans were 76-80% and 68-81%, respectively. Furthermore, the thermal half-lives (t1/2) of compounds A2-A4 and B2 ranged from 0.9 to 5.3 h, affected by the diverse substituents at the R1 and R2 positions. The results indicated that azo photoswitches based on the phenolylazoindole scaffold had stationary photophysical properties and wouldn't be excessively affected by modifying the functional groups. Compounds A4 and B2, which were modified with an aryl group, also exhibited fluorescence emission properties (the quantum yields of A4 and B2 were 2.32% and 13.34%) through the modification of the flexible conjugated structure (benzene) at the R2 position. Significantly, compound C1 was obtained via modification with a pharmacophore in order to acquire antifungal activities against three plant fungi, Rhizoctonia solani (R. solani), Botrytis cinerea (B. cinerea), and Fusarium graminearum (F. graminearum). Strikingly, the inhibitory activity of the cis-isomer of compound C1towards R. solani (53.3%) was significantly better than that of the trans-isomer (34.2%) at 50 μg mL-1. In order to further reveal the antifungal mechanism, molecular docking simulations demonstrated that compound C1 effectively integrates into the cavity of succinate dehydrogenase (SDH); the optically controlled cis-isomer showed a lower binding energy with SDH than that of the trans-isomer. This research confirmed that phenolylazoindole photoswitches can be appropriately applied as molecular regulatory devices and functional photoswitch molecules via bis-functionalization.

Light-Driven Membrane Assembly, Shape-Shifting, and Tissue Formation in Chemically Responsive Synthetic Cells

Living systems create remarkable complexity from a limited repertoire of biological building blocks by controlling assembly dynamics at the molecular, cellular, and multicellular level. An open question is whether simplified synthetic cells can gain similar complex functionality by being driven away from equilibrium. Here, we describe a dynamic synthetic cell system assembled using artificial lipids that are responsive to both light and chemical stimuli. Irradiation of disordered aggregates of lipids leads to the spontaneous emergence of giant cell-like vesicles, which revert to aggregates when illumination is turned off. Under irradiation, the synthetic cell membranes can interact with chemical building blocks, remodeling their composition and forming new structures that prevent the membranes from undergoing retrograde aggregation processes. The remodeled light-responsive synthetic cells reversibly alter their shape under irradiation, transitioning from spheres to rodlike shapes, mimicking energy-dependent functions normally restricted to living materials. In the presence of noncovalently interacting multivalent polymers, light-driven shape changes can be used to trigger vesicle cross-linking, leading to the formation of functional synthetic tissues. By controlling light and chemical inputs, the stepwise, one-pot transformation of lipid aggregates to multivesicular synthetic tissues is feasible. Our results suggest a rationale for why even early protocells may have required and evolved simple mechanisms to harness environmental energy sources to coordinate hierarchical assembly processes.

Photo-Lipids: Light-Sensitive Nano-Switches to Control Membrane Properties

Biological membranes are described as a complex mixture of lipids and proteins organized according to thermodynamic principles. This chemical and spatial complexity can lead to specialized functional membrane domains enriched with specific lipids and proteins. The interaction between lipids and proteins restricts their lateral diffusion and range of motion, thus altering their function. One approach to investigating these membrane properties is to use chemically accessible probes. In particular, photo-lipids, which contain a light-sensitive azobenzene moiety that changes its configuration from trans- to cis- upon light irradiation, have recently gained popularity for modifying membrane properties. These azobenzene-derived lipids serve as nanotools for manipulating lipid membranes in vitro and in vivo. Here, we will discuss the use of these compounds in artificial and biological membranes as well as their application in drug delivery. We will focus mainly on changes in the membrane's physical properties as well as lipid membrane domains in phase-separated liquid-ordered/liquid-disordered bilayers driven by light, and how these changes in membrane physical properties alter transmembrane protein function.

Photo-Controlled Nano-Supramolecular Size and Reversible Luminescent Behaviors Based on Cucurbit[7]uril Cascaded Assembly

Supramolecular luminescent material with switchable behavior and photo-induced aggregation with emission enhancement is a current research hot spot. Herein, a size-tunable nano-supramolecular assembly with reversible photoluminescent behavior was constructed by noncovalent polymerization of diarylethene-bridged bis(coumarin) derivative (DAE-CO), cucurbit[7]uril (CB[7]), and β-cyclodextrin-grafted hyaluronic acid (HACD). Benefiting from the macrocyclic confinement effect, the guest molecule DAE-CO was included into the cavity of CB[7] to give enhanced fluorescence emission of the resulting DAE-CO⊂CB[7]2 with longer lifetime at 432 nm to 1.43 ns, thereby further enhancing fluorescence output and lifetime (1.46 ns) when further assembled with HACD, compared with the free DAE-CO (0.95 ns). In addition, DAE-CO, DAE-CO⊂CB[7]2, and DAE-CO⊂CB[7]2&HACD all possessed characteristics of aggregation-induced emission and reversible photo-switched structural interconversion, exhibiting an obvious photophysical activation phenomenon of self-aggregation into larger nanoparticles with increase in fluorescence emission intensity, lifetime, and size after irradiation, which could be increased step by step with the alternating irradiation of 254 nm (5 min) or >600 nm (30 s) repeated 7 times. These supramolecular assemblies were successfully used in the tumor cells' targeted imaging and anti-counterfeiting because of the capability of HACD for recognizing specific receptors overexpressed on the surface of tumor cells and the excellent photo-regulated switch ability of DAE-CO, providing an approach of constructing photo-induced emission-enhanced luminescent materials.

Photoswitchable molecular glue for RNA: reversible photocontrol of structure and function of the ribozyme

Single-stranded RNA folds into a variety of secondary and higher-order structures. Distributions and dynamics of multiple RNA conformations are responsible for the biological function of RNA. We here developed a photoswitchable molecular glue for RNA, which could reversibly control the association of two unpaired RNA regions in response to light stimuli. The photoswitchable molecular glue, NCTA, is an RNA-binding ligand possessing a photoisomerizable azobenzene moiety. Z-NCTA is an active ligand for the target RNA containing 5'-WGG-3'/5'-WGG-3' (W = U or A) site and stabilizes its hybridized state, while its isomer E-NCTA is not. Photoreversible isomerization of NCTA enabled control of the secondary and tertiary structure of the target RNA. The RNA-cleaving activity of hammerhead ribozyme, where appropriate RNA folding is necessary, could be reversibly regulated by photoirradiation in cells treated with NCTA, demonstrating precise photocontrol of RNA structure and function by the photoswitchable molecular glue.

Controlled destabilization of caged circularized DNA oligonucleotides predicted by replica exchange molecular dynamics simulations

Spatiotemporal control is a critical issue in the design of strategies for the photoregulation of oligonucleotide activity. Efficient uncaging, i.e., activation by removal of photolabile protecting groups (PPGs), often necessitates multiple PPGs. An alternative approach is based on circularization strategies, exemplified by intrasequential circularization, also denoted photo-tethering, as introduced in [Seyfried et al., Angew. Chem., Int. Ed., 2017, 56, 359]. Here, we develop a computational protocol, relying on replica exchange molecular dynamics (REMD), in order to characterize the destabilization of a series of circularized, caged DNA oligonucleotides addressed in the aforementioned study. For these medium-sized (32 nt) oligonucleotides, melting temperatures are computed, whose trend is in good agreement with experiment, exhibiting a large destabilization and, hence, reduction of the melting temperature of the order of ΔTm ∼ 30 K as compared with the native species. The analysis of free energy landscapes confirms the destabilization pattern experienced by the circularized oligonucleotides. The present study underscores that computational protocols that capture controlled destabilization and uncaging of oligonucleotides are promising as predictive tools in the tailored photocontrol of nucleic acids.

Synthesis of an Ortho-Functionalized Tetrafluorinated Azobenzene Phosphoramidite for Incorporation into a Tetrafluorinated Azobenzene-Containing siRNA for Photocontrolled Gene Silencing

This article presents the detailed synthesis and characterization protocols for an ortho-functionalized tetrafluorinated azobenzene containing siRNA, which has photoswitchable properties. To design this tetrafluorinated azobenzene scaffold, several synthetic steps are performed to generate a symmetrical tetrafluorinated azobenzene diol. This diol is treated with dimethoxytrityl chloride (DMT-Cl) to protect one of the alcohols. Next, the DMT-protected tetrafluorinated monoalcohol is phosphitylated to afford the DMT-phosphoramidite building block used for solid-phase synthesis. This paper also contains the detailed biophysical characterization, biological testing, and photo-switching protocols of an ortho-functionalized fluorinated azobenzene containing siRNA (F-siRNA), which has photoswitchable properties that can be controlled with visible light. First, the F-siRNA was characterized by annealing the sense and antisense strands together and then measuring the circular dichroism (CD) profile and melting temperature (Tm ) of the duplexes. Second, biological testing of the F-siRNA is performed in cell culture to determine their gene silencing efficacy. Finally, their gene-silencing activities are measured after exposure to green light to inactivate the F-siRNA, followed by blue light, which reactivates the F-siRNA. The F-siRNA can be kept inactive for up to 72 hr and reactivated at any time within this 72-hr window. © 2023 Wiley Periodicals LLC.

Photo-Controlled Self-Assembly of Nanoparticles: A Promising Strategy for Development of Novel Structures

Photo-controlled self-assembly of nanoparticles (NPs) is an advanced and promising approach to address a series of material issues from the molecular level to the nano/micro scale, owing to the fact that light stimulus is typically precise and rapid, and can provide contactless spatial and temporal control. The traditional photo-controlled assembly of NPs is based on photochemical processes through NPs modified by photo-responsive molecules, which are realized through the change in chemical structure under irradiation. Moreover, photoexcitation-induced assembly of NPs is another promising physical strategy, and such a strategy aims to employ molecular conformational change in the excited state (rather than the chemical structure) to drive molecular motion and assembly. The exploration and control of NP assembly through such a photo-controlled strategy can open a new paradigm for scientists to deal with "bottom-up" behaviors and develop unprecedented optoelectronic functional materials.

Application of intelligent responsive DNA self-assembling nanomaterials in drug delivery

Smart nanomaterials are nano-scaled materials that respond in a controllable and reversible way to external physical or chemical stimuli. DNA self-assembly is an effective way to construct smart nanomaterials with precise structure, diverse functions and wide applications. Among them, static structures such as DNA polyhedron, DNA nanocages and DNA hydrogels, as well as dynamic reactions such as catalytic hairpin reaction, hybridization chain reaction and rolling circle amplification, can serve as the basis for building smart nanomaterials. Due to the advantages of DNA, such as good biocompatibility, simple synthesis, rational design, and good stability, these materials have attracted increasing attention in the fields of pharmaceuticals and biology. Based on their specific response design, DNA self-assembled smart nanomaterials can deliver a variety of drugs, including small molecules, nucleic acids, proteins and other drugs; and they play important roles in enhancing cellular uptake, resisting enzymatic degradation, controlling drug release, and so on. This review focuses on different assembly methods of DNA self-assembled smart nanomaterials, therapeutic strategies based on various intelligent responses, and their applications in drug delivery. Finally, the opportunities and challenges of smart nanomaterials based on DNA self-assembly are summarized.

Metal-mediated DNA strand displacement and molecular device operations based on base-pair switching of 5-hydroxyuracil nucleobases

Rational design of self-assembled DNA nanostructures has become one of the fastest-growing research areas in molecular science. Particular attention is focused on the development of dynamic DNA nanodevices whose configuration and function are regulated by specific chemical inputs. Herein, we demonstrate the concept of metal-mediated base-pair switching to induce inter- and intramolecular DNA strand displacement in a metal-responsive manner. The 5-hydroxyuracil (UOH) nucleobase is employed as a metal-responsive unit, forming both a hydrogen-bonded UOH-A base pair and a metal-mediated UOH-GdIII-UOH base pair. Metal-mediated strand displacement reactions are demonstrated under isothermal conditions based on the base-pair switching between UOH-A and UOH-GdIII-UOH. Furthermore, metal-responsive DNA tweezers and allosteric DNAzymes are developed as typical models for DNA nanodevices simply by incorporating UOH bases into the sequence. The metal-mediated base-pair switching will become a versatile strategy for constructing stimuli-responsive DNA nanostructures, expanding the scope of dynamic DNA nanotechnology.

Modulating Secondary Structure Motifs Through Photo-Labile Peptide Staples

Peptide-protein interactions (PPIs) are facilitated by the well-defined three-dimensional structure of bioactive peptides, interesting compounds for the development of new therapeutic agents. Their secondary structure and thus their propensity to engage in PPIs can be influenced by the introduction of peptide staples on the side chains. In particular, light-controlled staples based on azobenzene photoswitches and their structural influence on helical peptides have been studied extensively. In contrast, photolabile staples bearing photocages as a structural key motif, have mainly been used to block supramolecular interactions. Their influence on the secondary structure of the target peptide is under-investigated. Thus, in this study we use a combination of spectroscopic techniques and in silico simulations to systematically study a series of helical peptides with varying length of the photo-labile staple to obtain a detailed insight into the structure-property relationship in such photoresponsive biomolecules.

Light-Driven and Metal-Organic Framework Synergetic Loaded DNA Tetrahedral Amplifier for Exonuclease III-Powered All-in-One Biosensing and Chemotherapy in Live Biosystems

As a result of inaccurate biosensing and difficult synergetic loading, it is challenging to further impel DNA amplifiers to perform therapeutic application. Herein, we introduce some innovative solutions. First, a smart light-driven biosensing concept based on embedding nucleic acid modules with a simple photocleavage-linker is proposed. In this system, the target identification component is exposed on irradiation with ultraviolet light, thus avoiding an always-on biosensing response during biological delivery. Further, in addition to providing controlled spatiotemporal behavior and precise biosensing information, a metal-organic framework is used for the synergetic loading of doxorubicin in the internal pores, whereafter a rigid DNA tetrahedron-sustained exonuclease III-powered biosensing system is attached to prevent drug leakage and enhance resistance to enzymatic degradation. By selecting a next-generation breast cancer correlative noncoding microRNA biomarker (miRNA-21) as a model low-abundance analyte, a highly sensitive in vitro detection ability even allowing to distinguish single-base mismatching is demonstrated. Moreover, the all-in-one DNA amplifier shows excellent bioimaging competence and good chemotherapy efficacy in live biosystems. These findings will drive research into the use of DNA amplifiers in diagnosis and therapy integrated fields.

Photoswitchable Inhibitors to Optically Control Specific Kinase Activity

Potent and selective small-molecule inhibitors are valuable tools to elucidate the functions of protein kinases within complex signaling networks. Incorporation of a photoswitchable moiety into the inhibitor scaffold offers the opportunity to steer inhibitor potency with temporal precision, while the challenge of selective inhibition can often be addressed by employing a chemical genetic approach, termed the analog-sensitive method. Here, we combine the perks of these two approaches and report photoswitchable azopyrazoles to target calcium-dependent protein kinase 1 (CDPK1) from Toxoplasma gondii, a kinase naturally susceptible to analog-sensitive kinase inhibitors due to its glycine gatekeeper residue. The most promising azopyrazoles display favorable photochemical properties, thermal stability, and a substantial difference in IC50 values between both photostationary states. Consequently, the CDPK1 kinase reaction can be controlled dynamically and reversibly by applying light of different wavelengths. Inhibition of CDPK1 by the azopyrazoles drastically relies on the nature of the gatekeeper residue as a successive increase in gatekeeper size causes a concurrent loss of inhibitory activity. Furthermore, two photoswitchable inhibitors exhibit activity against T. gondii and Cryptosporidium parvum infection in a cell culture model, making them a promising addition to the toolbox for dissecting the role of CDPK1 in the infectious cycle with high temporal control. Overall, this work merges the benefits of the analog-sensitive approach and photopharmacology without compromising inhibitory potency and thus holds great promise for application to other protein kinases in the future.

Diestervinyl-functionalized acceptor-acceptor type dithienylethenes with efficient photochromic performance

Exploring novel dithienylethenes (DTEs) with efficient photochromism has drawn increasing attention in virtue of the potential applications for photoelectric functional materials. In this contribution, we presented two novel acceptor-acceptor (A-A) type DTE derivatives (4a and 4b) by incorporating the diestervinyl moieties with strong electron-withdrawing capacity into two sides of DTE skeleton. The corresponding structures were well confirmed by the NMR (¹H and ¹³C) and HRMS. When irradiated alternately with ultraviolet and visible light, 4a and 4b showed efficient photochromism in toluene, chloroform and DMSO, clearly implying a solvent-dependence feature. Moreover, excellent photoswitching behaviors were also observed in the poly(methyl methacrylate) (PMMA) film. The density functional theory (DFT) calculations suggested that strong Acceptor-Acceptor effect plays a dominative role in the efficient photochromic performance. Hence, this study will provide a useful guidance for developing high-performance DTE derivatives in multi-media.

Cascaded, Feedback-Driven, and Spatially Localized Emergence of Constitutional Dynamic Networks Driven by Enzyme-Free Catalytic DNA Circuits

The enzyme-free catalytic hairpin assembly (CHA) process is introduced as a functional reaction module for guided, high-throughput, emergence, and evolution of constitutional dynamic networks, CDNs, from a set of nucleic acids. The process is applied to assemble networks of variable complexities, functionalities, and spatial confinement, and the systems provide possible mechanistic pathways for the evolution of dynamic networks under prebiotic conditions. Subjecting a set of four or six structurally engineered hairpins to a promoter P₁ leads to the CHA-guided emergence of a [2 × 2] CDN or the evolution of a [3 × 3] CDN, respectively. Reacting of a set of branched three-arm DNA-hairpin-functionalized junctions to the promoter strand activates the CHA-induced emergence of a three-dimensional (3D) CDN framework emulating native gene regulatory networks. In addition, activation of a two-layer CHA cascade circuit or a cross-catalytic CHA circuit and cascaded driving feedback-driven evolution of CDNs are demonstrated. Also, subjecting a four-hairpin-modified DNA tetrahedron nanostructure to an auxiliary promoter strand simulates the evolution of a dynamically equilibrated DNA tetrahedron-based CDN that undergoes secondary fueled dynamic reconfiguration. Finally, the effective permeation of DNA tetrahedron structures into cells is utilized to integrate the four-hairpin-functionalized tetrahedron reaction module into cells. The spatially localized miRNA-triggered CHA evolution and reconfiguration of CDNs allowed the logic-gated imaging of intracellular RNAs. Beyond the bioanalytical applications of the systems, the study introduces possible mechanistic pathways for the evolution of functional networks under prebiotic conditions.

Nonlinear Optical Properties and Phototunable Absorption of a Substituted Dihydroazulene-Vinylheptafulvene Pair of Photochromes

Quantum calculations were used to study UV-vis absorption properties and nonlinear optical characteristics of a variety of substituted dihydroazulene (DHA)/vinylheptafulvene (VHF) photoswitches. The absorption properties are substantially based on the position and nature of the substituent. In general, electron-donating groups cause red shifts compared to the parent compound. Any electron-withdrawing group, on the other hand, would generate a blue shift. Furthermore, the steric effect at some positions is accountable for the loss of planarity and, as a response, a decrease in electronic conjugation within the molecule, which in most cases result in blue shifts in maximum absorption. The purpose of this research is to investigate the influence of substitution at the seven-membered ring of the DHA/VHF system on the absorption spectra and nonlinear optical characteristics of dihydroazulene photoswitches. UV-vis spectra and hyperpolarizability are determined since a prospective photoswitch should have a minimum overlap of absorption spectra from both isomers. Furthermore, the differential in hyperpolarizability between DHA and VHF is critical for practical applications.

Photoexcitation-Induced Assembly: A Bottom-Up Physical Strategy for Driving Molecular Motion and Phase Evolution

ConspectusIn the field of molecular assembly, photodriven self-assembly is a smart and crucial strategy to regulate the molecular orderliness, multiscale structure, and optoelectronic properties. Traditionally, photodriven self-assembly is based on photochemical processes, through molecular structural change induced by photoreactions. Despite great progress in the photochemical self-assembly, there still exists disadvantages (e.g., the photoconversion rate never reaches 100% with the possible side reactions). Therefore, the photoinduced nanostructure and morphology are often difficult to predict due to insufficient phase transition or defects. In contrast, the physical processes based on photoexcitation are straightforward and can fully utilize photons to avoid the drawbacks of photochemistry. The photoexcitation strategy excludes the change of molecular structure, only utilizing the molecular conformational change from the ground state to excited state. Then, the excited state conformation is employed to drive molecular movement and aggregation, further promoting the synergistic assembly or phase transition of the entire material system. The regulation and exploration of molecular assembly upon photoexcitation can open up a new paradigm to deal with the "bottom-up" behavior and develop unprecedented optoelectronic functional materials.This Account starts with a brief introduction to the problems faced by photocontrolled self-assembly and presents the photoexcitation-induced assembly (PEIA) strategy. Then, we focus on exploring PEIA strategy based on persulfurated arenes as the prototype. The molecular conformational transition of persulfurated arenes from the ground state to the excited state is conducive to the formation of intermolecular interactions, successively driving molecular motion, aggregation, and assembly. Next, we describe our progress in exploring PEIA of persulfurated arenes at the molecular level and then demonstrate that the PEIA of persulfurated arenes can synergistically drive molecular motion and phase transition in various block copolymer systems. Moreover, we provide the potential applications of PEIA in dynamic visual imaging, information encryption, and surface property regulation. Finally, an outlook on further development of PEIA is prospected.

Multicolor Adjustable B-N Molecular Switches: Simple, Efficient, Portable, and Visual Identification of Butanol Isomers

As intelligent probes, dynamic and controllable molecular switches are useful tools for probing and intervening in life processes. However, the types and properties of molecular switches are still relatively single and often can only make two actions: "off" and "on". Therefore, the development of novel molecular switches with multiple colors and multiple instructions is very challenging. Herein, we propose a novel strategy based on the instability of the Lewis acid-base pair (boron (B) and nitrogen (N)), such as introducing the Schiff base (C═N) group into the aminoborane skeleton and preparing the novel molecular switches BN-HDZ and BN-HDZ-N. These two molecules were found to have good multicolor fluorescence switching capability for methanol. Surprisingly, the compound BN-HDZ-N shows unprecedented visual identification for the butanol isomers and could be made into a portable strip for simple and rapid visual identification of the four isomers of butanol, promising an alternative to conventional Lucas reagents. This provides a novel strategy for the design and fabrication of novel multicolor-tunable molecular switches with visual identification of isomers.

Photoresponsive Supramolecular Polymers: From Light-Controlled Small Molecules to Smart Materials

Photoresponsive supramolecular polymers are well-organized assemblies based on highly oriented and reversible noncovalent interactions containing photosensitive molecules as (co-)monomers. They have attracted increasing interest in smart materials and dynamic systems with precisely controllable functions, such as light-driven soft actuators, photoresponsive fluorescent anticounterfeiting and light-triggered electronic devices. The present review discusses light-activated molecules used in photoresponsive supramolecular polymers with their main photo-induced changes, e.g., geometry, dipole moment, and chirality. Based on these distinct changes, supramolecular polymers formed by light-activated molecules exhibit photoresponsive disassembly and reassembly. As a consequence, photo-induced supramolecular polymerization, "depolymerization," and regulation of the lengths and topologies are observed. Moreover, the light-controlled functions of supramolecular polymers, such as actuation, emission, and chirality transfer along length scales, are highlighted. Furthermore, a perspective on challenges and future opportunities is presented. Besides the challenge of moving from harmful UV light to visible/near IR light avoiding fatigue, and enabling biomedical applications, future opportunities include light-controlled supramolecular actuators with helical motion, light-modulated information transmission, optically recyclable materials, and multi-stimuli-responsive supramolecular systems.

Controlling DNA nanodevices with light-switchable buffers

Control over synthetic DNA-based nanodevices can be achieved with a variety of physical and chemical stimuli. Actuation with light, however, is as advantageous as difficult to implement without modifying DNA strands with photo-switchable groups. Herein, we show that DNA nanodevices can be controlled using visible light in photo-switchable aqueous buffer solutions in a reversible and highly programmable fashion. The strategy presented here is non-invasive and allows the remote control with visible light of complex operations of DNA-based nanodevices such as the reversible release/loading of cargo molecules.

Metal-dependent base pairing of bifacial iminodiacetic acid-modified uracil bases for switching DNA hybridization partner

Dynamic control of DNA assembly by external stimuli has received increasing attention in recent years. Dynamic ligand exchange in metal complexes can be a central element in the structural and functional transformation of DNA assemblies. In this study, N,N-dicarboxymethyl-5-aminouracil (dcaU) nucleoside with an iminodiacetic acid (IDA) ligand at the 5-position of the uracil base has been developed as a bifacial nucleoside that can form both hydrogen-bonded and metal-mediated base pairs. Metal complexation study of dcaU nucleosides revealed their ability to form a 2:1 complex with a GdIII ion at the monomeric level. The characteristics of base pairing of dcaU nucleosides were then examined inside DNA duplexes. The results revealed that the formation of the metal-mediated dcaU-GdIII-dcaU pair significantly stabilized the DNA duplex containing one dcaU-dcaU mismatch (ΔT m = +16.1 °C). In contrast, a duplex containing a hydrogen-bonded dcaU-A pair was destabilized in the presence of GdIII (ΔT m = -3.5 °C). The GdIII-dependent base pairing of dcaU bases was applied to control the hybridization preference of DNA in response to metal ions. The hybridization partner of a dcaU-containing strand was reversibly exchanged by the addition and removal of GdIII ions. Since the incorporation of a single dcaU base can switch the hybridization behavior of DNA, the bifacial dcaU base would be a versatile building block for imparting metal responsiveness to DNA assemblies, allowing the rational design of dynamic DNA systems.

Modulating the Lifetime of DNA Motifs Using Visible Light and Small Molecules

Here we regulate the formation of dissipative assemblies built from DNA using a merocyanine photoacid that responds to visible light. The operation of our system and the relative distribution of species within it are controlled by irradiation time, initial pH value, and the concentration of a small-molecule binder that inhibits the reaction cycle. This approach is modular, does not require DNA modification, and can be used for several DNA sequences and lengths. Our system design allows for waste-free control of dissipative DNA nanotechnology, toward the generation of nonequilibrium, life-like nanodevices.

Thermal and (Thermo-Reversible) Photochemical Cycloisomerization of 1H-2-Benzo[c]oxocins: From Synthetic Applications to the Development of a New T-Type Molecular Photoswitch

A novel T-type molecular photoswitch based on the reversible cyclization of 1H-2-benzo[c]oxocins to dihydro-4H-cyclobuta[c]isochromenes has been developed. The switching mechanism involves a light-triggered ring-contraction of 8-membered 1H-2-benzo[c]oxocins to 4,6-fused O-heterocyclic dihydro-4H-cyclobuta[c]isochromene ring systems, with reversion back to the 1H-2-benzo[c]oxocin state accessible through heating. Both processes are unidirectional and proceed with good efficiency, with switching properties─including reversibility and half-life time─easily adjusted via structural functionalization. Our new molecular-switching platform exhibits independence from solvent polarity, originating from its neutral-charge switching mechanism, a property highly sought-after for biological applications. The photoinduced ring-contraction involves a [2+2] conjugated-diene cyclization that obeys the Woodward-Hoffmann rules. In contrast, the reverse process initiates via a thermal ring-opening (T > 60 °C) to produce the original 8-membered 1H-2-benzo[c]oxocins, which is thermally forbidden according to the Woodward-Hoffmann rules. The thermal ring-opening is likely to proceed via an ortho-quinodimethane (o-QDM) intermediate, and the corresponding switching mechanisms are supported by experimental observations and density functional theory calculations. Other transformations of 1H-2-benzo[c]oxocins were found upon altering reaction conditions: prolonged heating of the 1H-2-benzo[c]oxocins at a significantly elevated temperature (72 h at 120 °C), with the resulting dihydronaphthalenes formed via the o-QDM intermediate. These reactions also proceed with good chemoselectivities, providing new synthetic protocols for motifs found in several bioactive molecules, but are otherwise difficult to access.

DNA-Based Molecular Machines

Artificial molecular machines have found widespread applications ranging from fundamental studies to biomedicine. More recent advances in exploiting unique physical and chemical properties of DNA have led to the development of DNA-based artificial molecular machines. The unprecedented programmability of DNA provides a powerful means to design complex and sophisticated DNA-based molecular machines that can exert mechanical force or motion to realize complex tasks in a controllable, modular fashion. This Perspective highlights the potential and strategies to construct artificial molecular machines using double-stranded DNA, functional nucleic acids, and DNA frameworks, which enable improved control over reaction pathways and motion behaviors. We also outline the challenges and opportunities of using DNA-based molecular machines for biophysics, biosensing, and biocomputing.

Phototunable Absorption and Nonlinear Optical Properties of Thermally Stable Dihydroazulene-Vinylheptafulvene Photochrome Pair

The UV-vis absorption characteristics and nonlinear optical properties of a series of substituted dihydroazulene (DHA)/vinylheptafulvene (VHF) photoswitches are investigated by applying quantum calculations. Introduction of substituents at the seven-membered ring resulted in significant changes in their absorption properties depending on the nature and position of the substituent. Electron-donating groups at positions 5, 6, 7, and 8 generally exhibited red shifts with respect to the parent compound. However, the steric effect at positions 8a and 4 is responsible for the loss of planarity and conjugation, which generally leads to blue shifts. In contrast, any electron-withdrawing group, particularly at positions 8a and 4, would cause a blue shift. The presence of bulky groups at position 8a results in a loss of planarity and, as a result, a decrease in electronic conjugation within the molecule, resulting in a blue shift in the maximum absorption. When it comes to halogens, the red shift is directly correlated to the nucleophilicity; the higher the nucleophilicity, the larger the red shift. Regarding hyperpolarizability, the charge separation induces higher hyperpolarizabilities for all substituted VHFs compared to the corresponding DHAs, resulting in a much higher NLO response. In addition, for all DHA and VHF, the highest values of hyperpolarizabilities are calculated for 6-substituted systems. Finally, the objective of this detailed theoretical investigation is to continue exploring the photophysical properties of DHA-VHF through structural modifications.

Action of the Photochrome Glyght on GABAergic Synaptic Transmission in Mouse Brain Slices

Glyght is a new photochromic compound described as an effective modulator of glycine receptors at heterologous expression, in brain slices and in zebrafish larvae. Glyght also caused weak inhibition of GABA_A-mediated currents in a cell line expressing α1/β2/γ2 GABA_A receptors. However, the effects of Glyght on GABAergic transmission in the brain have not been analysed, which does not allow a sufficiently comprehensive assessment of the effects of the compound on the nervous system. Therefore, in this study using whole-cell patch-clamp recording, we analysed the Glyght (100 µM) action on evoked GABAergic inhibitory postsynaptic currents (eIPSCs) in mice hippocampal slices. Two populations of cells were found: the first responded by reducing the GABAergic eIPSCs’ amplitude, whereas the second showed no sensitivity to the compound. Glyght did not affect the ionic currents’ amplitude induced by GABA application, suggesting the absence of action on postsynaptic GABA receptors. Additionally, Glyght had no impact on the paired-pulse modulation of GABAergic eIPSCs, indicating that Glyght does not modulate the neurotransmitter release mechanisms. In the presence of strychnine, an antagonist of glycine receptors, the Glyght effect on GABAergic synaptic transmission was absent. Our results suggest that Glyght can modulate GABAergic synaptic transmission via action on extrasynaptic glycine receptors.

Dynamic Catalysis Guided by Nucleic Acid Networks and DNA Nanostructures

Nucleic acid networks conjugated to native enzymes and supramolecular DNA nanostructures modified with enzymes or DNAzymes act as functional reaction modules for guiding dynamic catalytic transformations. These systems are exemplified with the assembly of constitutional dynamic networks (CDNs) composed of nucleic acid-functionalized enzymes, as constituents, undergoing triggered structural reconfiguration, leading to dynamically switched biocatalytic cascades. By coupling two nucleic acid/enzyme networks, the intercommunicated feedback-driven dynamic biocatalytic operation of the system is demonstrated. In addition, the tailoring of a nucleic acid/enzyme reaction network driving a dissipative, transient, biocatalytic cascade is introduced as a model system for out-of-equilibrium dynamically modulated biocatalytic transformation in nature. Also, supramolecular nucleic acid machines or DNA nanostructures, modified with DNAzyme or enzyme constituents, act as functional reaction modules driving temporal dynamic catalysis. The design of dynamic supramolecular machines is exemplified with the introduction of an interlocked two-ring catenane device that is dynamically reversibly switched between two states operating two different DNAzymes, and with the tailoring of a DNA-tweezers device functionalized with enzyme/DNAzyme constituents that guides the dynamic ON/OFF operation of a biocatalytic cascade by opening and closing the molecular device. In addition, DNA origami nanostructures provide functional scaffolds for the programmed positioning of enzymes or DNAzyme for the switchable operation of catalytic transformations. This is introduced by the tailored functionalization of the edges of origami tiles with nucleic acids guiding the switchable formation of DNAzyme catalysts through the dimerization/separation of the tiles. In addition, the programmed deposition of two-enzyme/cofactor constituents on the origami raft allowed the dynamic photochemical activation of the cofactor-mediated biocatalytic cascade on the spatially biocatalytic assembly on the scaffold. Furthermore, photoinduced "mechanical" switchable and reversible unlocking and closing of nanoholes in the origami frameworks allow the "ON" and "OFF" operation of DNAzyme units in the nanoholes, confined environments. The future challenges and potential applications of dynamic nucleic acid/enzyme and DNAzyme conjugates are discussed in the conclusion paragraph.

Linear and Nonlinear Optical Properties of Azobenzene Derivatives Modified with an (Amino)naphthalene Moiety

The design of two-photon absorbing azobenzene (AB) derivatives has received much attention; however, the two-photon absorption (2PA) properties of bis-conjugated azobenzene systems are relatively less explored. Here, we present the synthesis of six azobenzene derivatives and three bis-azobenzenes substituted (or not) at para position(s) with one or two amino group(s). Their linear and nonlinear absorption properties are studied experimentally and theoretically. The switching behavior and thermal stability of the Z-isomer are studied for unsubstituted mono- (1a, 2a) and bis-azobenzene (3a) compounds, showing that when the length of the π system increases, the half-life of the Z-isomer decreases. Moreover, along with the increase of π-conjugation, the photochromic characteristics are impaired and the photostationary state (PSS) related to E-Z photoisomerization is composed of 89% of the Z-isomer for 2a and 26% of the Z-isomer for 3a. Importantly, the 2PA cross-section increases almost five-fold on extending the π-conjugation (2a vs 3a) and by about one order of magnitude when comparing two systems: the unsubstituted π-electron one (2a, 3a) with D-π-D (2c, 3c). This work clarifies the contribution of π-conjugation and substituent effects to the linear and nonlinear optical properties of mono- and bis-azobenzene compounds based on the experimental and theoretical approaches.

Stepping Out of the Blue: From Visible to Near-IR Triggered Photoswitches

Light offers unique opportunities for controlling the activity of materials and biosystems with high spatiotemporal resolution. Molecular photoswitches are chromophores that undergo reversible isomerization between different states upon irradiation with light, allowing a convenient means to control their influence over the system of interest. However, a significant limitation of classical photoswitches is the requirement to initiate the switching in one or both directions using deleterious UV light with poor tissue penetration. Red-shifted photoswitches are hence in high demand and have attracted keen recent research interest. In this Review, we highlight recent progress towards the development of visible- and NIR-activated photoswitches characterized by distinct photochromic reaction mechanisms. We hope to inspire further endeavors in this field, allowing the full potential of these tools in biotechnology and materials chemistry applications to be realized.

Dithienylethene-Bridged Fluoroquinolone Derivatives for Imaging-Guided Reversible Control of Antibacterial Activity

The emerging field of photopharmacology has offered a promising alternative to guard against the bacterial resistance by effectively avoiding antibiotic accumulation in the body or environment. However, the degradation, toxicity, and thermal reversibility have always been an ongoing concern for potential applications of azobenzene-based photopharmacology. Developing novel photopharmacological agents based on a more matched switch is highly in demand and remains a major challenge. Herein, two novel dithienylethene-bridged dual-fluoroquinolone derivatives have been developed by introducing two fluoroquinolone drugs into both ends of the dithienylethene (DTE) switch, in which the fluoroquinolone acts as a fluorophore except for the pharmacodynamic component. For comparison, two monofluoroquinolone-DTE hybrids were also prepared by a similar strategy. As expected, these resultant DTE-based antibacterial agents displayed efficient photochromism and fluorescence switching behavior in dimethyl sulfoxide. Moreover, improved antibacterial activities compared to those of monofluoroquinolone derivatives and a maximum fourfold active difference against Escherichia coli (E. coli) for open and closed isomers and photoswitchable bacterial imaging for Staphylococcus aureus and E. coli were observed. The molecular docking to DNA gyrase gave a rationale for the discrepancies in antibacterial activity for both isomers. Therefore, these fluoroquinolone derivatives can act as interesting imaging-guided photopharmacological agents for further in vivo studies.

Fabricating and Modulating Robust Multi-Photoaddressable Systems with the Derivatives of Diarylethylene and Donor-Acceptor Stenhouse Adducts

Multi-photoaddressable systems (MPSs) belong to complex systems, which are comprised of more than one photoswitching molecule and can respond to different wavelengths of light simultaneously. While MPSs have been extensively applied in various fields, there are also some challenges, such as the deficiency of the wavelength-selective control and the interference from the poor thermodynamic stability of used photoswitching molecules. Herein, we reported two robust MPSs (MPS1/2) consisting of diarylethylene derivative (DAE) and different donor-acceptor Stenhouse adducts (DASAs), in which both opened and closed forms of DAE and opened forms of DASAs are thermodynamically stable. MPS1/2 enable fully reversible cyclic photoswitching with improved thermal interference resistance. Moreover, MPS2 also shows a favorable property in PMMA films and has been applied in multicolor display. It is expected that the prepared MPSs could be used in more fields such as information storage and reading and encoding light.

Photoresponsive Small Molecule Inhibitors for the Remote Control of Enzyme Activity

The development of new and effective therapeutics is reliant on the ability to study the underlying mechanisms of potential drug targets in live cells and multicellular systems. A persistent challenge in many drug development programmes is poor selectivity, which can obscure the mechanisms involved and lead to poorly understood modes of action. In efforts to improve our understanding of these complex processes, small molecule inhibitors have been developed in which their OFF/ON therapeutic activity can be toggled using light. Photopharmacology is devoted to using light to modulate drugs. Herein, we highlight the recent progress made towards the development of light‐responsive small molecule inhibitors of selected enzymatic targets. Given the size of this field, literature from 2015 onwards has been reviewed.

Upconversion Luminescence-Initiated and GSH-Responsive Self-Driven DNA Motor for Automatic Operation in Living Cells and In Vivo

In light of the worthy design flexibility and the good signal amplification capacity, the recently developed DNA motor (especially the DNA walker)-based fluorescent biosensors can offer an admirable choice for realizing bioimaging. However, this attractive biosensing strategy not only has the disadvantage of uncontrollable initiation but also usually demands the supplement of exogenous driving forces. To handle the above obstacles, some rewarding solutions are proposed here. First, on the surface of an 808 nm near-infrared light-excited low-heat upconversion nanoparticle, a special ultraviolet upconversion luminescence-initiated three-dimensional (3D) walking behavior is performed by embedding a photocleavage linker into the sensing elements, and such light-controlled target recognition can perfectly overcome the pre-triggering of the biosensor during the biological delivery to significantly boost the sensing precision. After that, a peculiar self-driven walking pattern is constructed by employing MnO₂ nanosheets as an additional nanovector to physically absorb the sensing frame, for which the reduction of the widespread glutathione in the biological medium can bring about sufficient self-supplied Mn²⁺ to guarantee the walking efficiency. By selecting an underlying next-generation broad-spectrum cancer biomarker (survivin messenger RNA) as the model target, we obtain that the newly formed autonomous 3D DNA motor shows a commendable sensitivity (where the limit of detection is down to 0.51 pM) and even an outstanding specificity for distinguishing single-base mismatching. Beyond this sound assay performance, our sensing approach is capable of working as a powerful imaging platform for accurately operating in various living specimens such as cells and bodies, showing a favorable diagnostic ability for cancer care.