Improving the particulate matter filtration, antibacterial, and degradation properties of electrospinning poly(lactic acid) membranes with ZIF-8@chitosan

In order to improve the filtration efficiency of electrospinning poly(lactic acid) (PLA) membrane on particulate matter (PM), endow the membrane with good antibacterial properties, and accelerate the degradation effect of PLA materials in natural water and soil environments, ZIF-8@chitosan (ZIF-8@CS) was prepared by in situ growth method and was combined with PLA to manufacture the PLA/ZIF-8@CS electrospinning membranes. The PLA/ZIF-8@CS (3 wt%) membrane exhibited filtration efficiencies of 96.79 % for PM2.5 and 91.21 % for PM10, which were significantly higher than that of PP melt-blown cloth. Due to the inherently positive charge and the synergistic interaction between CS and ZIF-8, the antibacterial rates of PLA/ZIF-8@CS membranes were up to 100 % for E. coli and S. aureus after contact for 8 h. The addition of ZIF-8@CS in the membranes also influenced the degradation behavior of PLA/ZIF-8@CS membranes evidently.

Comparing Conventional and Advanced Approaches for Heavy Metal Removal in Wastewater Treatment: An In-Depth Review Emphasizing Filter-Based Strategies

Various industrial activities release heavy metal ions into the environment, which represent one of the major toxic pollutants owing to their severe effects on the environment, humans, and all living species. Despite several technological advances and breakthroughs, wastewater treatment remains a critical global issue. Traditional techniques are dedicated to extracting heavy metal ions from diverse wastewater origins, encompassing coagulation/flocculation, precipitation, flotation, and ion exchange. Their cost, side toxicity, or ineffectiveness often limit their large-scale use. Due to their adaptable design, simple operation, and reasonable cost, membrane filtration and adsorption have proven their efficiency in removing metals from wastewater. Recently, adsorption-based filters have appeared promising in treating water. Within this range, filters incorporating natural, synthetic, or hybrid adsorbents present an appealing alternative to conventional approaches. This review aims to list and describe the conventional and advanced wastewater treatment methods by comparing their efficiency, cost, and environmental impact. Adsorption-based filters were highlighted due to the significant advantages they can provide.

Adsorptive removal of heavy metals from aqueous solutions: Progress of adsorbents development and their effectiveness

Increased levels of heavy metals (HMs) in aquatic environments poses serious health and ecological concerns. Hence, several approaches have been proposed to eliminate/reduce the levels of HMs before the discharge/reuse of HMs-contaminated waters. Adsorption is one of the most attractive processes for water decontamination; however, the efficiency of this process greatly depends on the choice of adsorbent. Therefore, the key aim of this article is to review the progress in the development and application of different classes of conventional and emerging adsorbents for the abatement of HMs from contaminated waters. Adsorbents that are based on activated carbon, natural materials, microbial, clay minerals, layered double hydroxides (LDHs), nano-zerovalent iron (nZVI), graphene, carbon nanotubes (CNTs), metal organic frameworks (MOFs), and zeolitic imidazolate frameworks (ZIFs) are critically reviewed, with more emphasis on the last four adsorbents and their nanocomposites since they have the potential to significantly boost the HMs removal efficiency from contaminated waters. Furthermore, the optimal process conditions to achieve efficient performance are discussed. Additionally, adsorption isotherm, kinetics, thermodynamics, mechanisms, and effects of varying adsorption process parameters have been introduced. Moreover, heavy metal removal driven by other processes such as oxidation, reduction, and precipitation that might concurrently occur in parallel with adsorption have been reviewed. The application of adsorption for the treatment of real wastewater has been also reviewed. Finally, challenges, limitations and potential areas for improvements in the adsorptive removal of HMs from contaminated waters are identified and discussed. Thus, this article serves as a comprehensive reference for the recent developments in the field of adsorptive removal of heavy metals from wastewater. The proposed future research work at the end of this review could help in addressing some of the key limitations facing this technology, and create a platform for boosting the efficiency of the adsorptive removal of heavy metals.

Effective Technique and Mechanism for Simultaneous Adsorption of As(III/V) from Wastewater by Fe-ZIF-8@MXene

Arsenic (As) contamination of surface water has become a global concern, especially for the third world countries, and it is imperative to develop advanced materials and an effective treatment method to address the issue. In this paper, iron doped ZIF-8@MXene (Fe-ZIF-8@MXene) was prepared as a potential adsorbent to effectively and simultaneously remove As(III/V) from wastewater. To investigate this, Fe-ZIF-8@MXene was characterized before and after the removal of mixed As(III/V). The results of Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), specific surface area (BET) and point of zero charge (pHpzc) showed that Fe-ZIF-8@MXene was prepared successfully and kept a stable structure after As(III) and As(V) adsorption. The particle size of Fe-ZIF-8@MXene was in the range of 0.5 μm to 2.5 μm, where its BET was 531.7 m2/g. For both contaminants, adsorption was found to follow pseudo-second-order kinetics and was best-fitted by the Langmuir adsorption model with correlation coefficients (R2) of 0.998 and 0.997, for As(III) and As(V), respectively. The adsorbent was then applied to remove As from two actual water samples, giving maximum removal rates of 91.07% and 98.96% for As(III) and As(V), respectively. Finally, removal mechanisms for As(III/V) by Fe-ZIF-8@MXene were also explored. During the adsorption, multiple complexes were formed under the effect of its abundant surface functional groups involving multiple mechanisms, which included Van der Waals force, surface adsorption, chemical complexation and electrostatic interactions. In conclusion, this study demonstrated that Fe-ZIF-8@MXene was an advanced and reusable material for simultaneous removal of As(III/V) in wastewater.

Removal of sarafloxacin from aqueous solution through Ni/Al-layered double hydroxide@ZIF-8

In recent years, excessive amounts of drugs such as antibiotics have been used to combat COVID-19 and newly discovered viruses. This has led to the production and release of significant amounts of drugs and their metabolites as toxic pollutants in aquatic systems. Therefore, pharmaceutical wastes must be removed efficiently before entering the environment and entering water sources. In this research, Ni/Al-LDH@ZIF-8 nanocomposite was synthesized from layered double hydroxides and metal-organic frameworks and used to remove the antibiotic sarafloxacin (SRF) in the aqueous medium. The work aimed to develop the performance and combine the features of the adsorbent compounds such as high surface area, adjustable porosity, and low-density structure. Different methods implemented to analyze the nanocomposite, such as Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. The experiment utilized the central composite design to evaluate statistics and the response level method to optimize the factors affecting the absorption process. The initial concentration of SRF, adsorbent dose, pH, and contact time were considered in this experiment. The results showed an increase in the removal efficiency of SRF to 97%. Statistical studies showed that the optimal adsorption conditions are as follows: initial concentration of SRF 40 mg·L-1, pH 6.3, adsorbent dose of Ni/Al-LDH@ZIF-8 49 mg, and contact time of 44 min. According to the model of isotherms parameters, the adsorption process is more consistence with the Freundlich model with the absorption capacity of 79.7 mg·g-1. The pseudo-second-order model described the adsorption kinetics data.

Graphical abstract

Enhanced adsorption and removal of Cd(II) from aqueous solution by amino-functionalized ZIF-8

Zeolite imidazolate framework-8 (ZIF-8), which is a special subgroup of metal-organic frameworks (MOFs), was synthesized and modified by ethylenediamine (ZIF-8-EDA) to prepare an efficient adsorbent for the high sorption of Cd2+ ions from solution. The synthesized and modified ZIF-8 (ZIF-8-EDA) were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM) analysis. The optimum conditions for dosage of adsorbent, initial ion concentration, pH, and contact time were 0.05 g/l, 50 mg/l, 6, and 60 min, respectively, for cadmium ion sorption from aqueous solutions with a removal efficiency of 89.7% for ZIF-8 and 93.5% for ZIF-8-EDA. Adsorption kinetics and equilibrium data were analyzed using the Langmuir and Freundlich equations. The Langmuir model fitted the equilibrium data better than the Freundlich model. According to the Langmuir equation, the maximum uptake for the cadmium ions was 294.11(mg/g). The calculated thermodynamic parameters (ΔG°, ΔH°, and ΔS°) indicated that the adsorption process was feasible, spontaneous, and endothermic at 20-50 °C. Based on the results, the amino functionalized ZIF-8 had improved adsorption performance due to the replacing of the starting linker with organic ligands that had effective functional groups, leading to chemical coordination due to the interaction of metal ions with the non-bonding pair of electrons on the N atoms of the amino functional group. The selectivity toward metal ion adsorption by ZIF-8-EDA was Cd2+ > Pb2+ > Ni2+‏.

MOFs Modulate Copper Trafficking in Tumor Cells for Bioorthogonal Therapy

In situ drug synthesis using the copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction has attracted considerable attention in tumor therapy because of its satisfactory effectiveness and reduced side-effects. However, the exogenous addition of copper catalysts can cause cytotoxicity and has hampered biomedical applications in vivo. Here, we design and synthesize a metal-organic framework (MOF) to mimic copper chaperone, which can selectively modulate copper trafficking for bioorthogonal synthesis with no need of exogenous addition of copper catalysts. Like copper chaperones, the prepared ZIF-8 copper chaperone mimics specifically bind copper ions through the formation of coordination bonds. Moreover, the copper is unloaded under the acidic environment due to the dissipation of the coordination interactions between metal ions and ligands. In this way, the cancer cell-targeted copper chaperone mimics can selectively transport copper ions into cells. Regulation of intracellular copper trafficking may inspire constructing bioorthogonal catalysis system with reduced metal cytotoxicity in live cells.

Combining emulsion electrospinning with surface functionalization to fabricate multistructural PLA/CS@ZIF-8 nanofiber membranes toward pH-responsive dual drug delivery

Developing of the multifunctional polymeric carrier for controlled drug release is still one of most challenging task. In this work, a pH-responsive dual drug delivery system was designed and prepared based on the zeolitic imidazolate framework-8 (ZIF-8). The poly(lactic acid)/chitosan (PLA/CS) core-shell nanofiber membranes by emulsion electrospinning, which the hydrophilic drug (Astragalus Polysacharin, APS) was encapsulated in the CS core and the hydrophobic drug (Camptothecin, CPT) was loaded into the PLA shell, respectively. Subsequently, ZIF-8 nanoparticles served as the protective layer were immobilized on the surface of PLA/CS to form multi-structural PLA/CS@ZIF-8 nanofiber membranes. In vitro drug release of nanofiber membranes were studied in the acidic and neutral medium, respectively. The results were that the hydrophilicity and surface roughness of nanofiber membranes rose with increasing of 2-MIM concentrations. The nanofiber membranes also had excellent pH-responsive and controlled release property. Furthermore, the drug release of PLA/CS@ZIF-8 for either APS or CPT were all carried out in a coexisting manner of diffusion and skeleton corrosion. In addition, in vitro cytotoxicity assay indicated nanofiber membranes with good cytocompatibility. Therefore, the multi-structured PLA/CS@ZIF-8 nanofiber membranes has been used as a potential pH-responsive dual drug release system.

Engineered yeasts and lignocellulosic biomaterials: shaping a new dimension for biorefinery and global bioeconomy

The next milestone of synthetic biology research relies on the development of customized microbes for specific industrial purposes. Metabolic pathways of an organism, for example, depict its chemical repertoire and its genetic makeup. If genes controlling such pathways can be identified, scientists can decide to enhance or rewrite them for different purposes depending on the organism and the desired metabolites. The lignocellulosic biorefinery has achieved good progress over the past few years with potential impact on global bioeconomy. This principle aims to produce different bio-based products like biochemical(s) or biofuel(s) from plant biomass under microbial actions. Meanwhile, yeasts have proven very useful for different biotechnological applications. Hence, their potentials in genetic/metabolic engineering can be fully explored for lignocellulosic biorefineries. For instance, the secretion of enzymes above the natural limit (aided by genetic engineering) would speed-up the down-line processes in lignocellulosic biorefineries and the cost. Thus, the next milestone would greatly require the development of synthetic yeasts with much more efficient metabolic capacities to achieve basic requirements for particular biorefinery. This review gave comprehensive overview of lignocellulosic biomaterials and their importance in bioeconomy. Many researchers have demonstrated the engineering of several ligninolytic enzymes in heterologous yeast hosts. However, there are still many factors needing to be well understood like the secretion time, titter value, thermal stability, pH tolerance, and reactivity of the recombinant enzymes. Here, we give a detailed account of the potentials of engineered yeasts being discussed, as well as the constraints associated with their development and applications.

Effects of ZIF-L Morphology on PI@PDA@PEI/ZIF-L Composite Membrane's Adsorption and Separation Properties for Heavy Metal Ions

Composite polymolecular separation membranes were prepared by combining multi-branched ZIF-L with high-porosity electrospinning nanofibers PI. Meanwhile, PDA and PEI were introduced into the membrane in order to improve its adhesion. The new membrane is called the "PI@PDA@PEI/ZIF-L-4" composite membrane. Compared with the PI@PDA@PEI/ZIF-8 composite membrane, the new membrane's filtration rates for heavy metal ions such as Cd2+, Cr3+, and Pb2+ were increased by 7.0%, 6.6%, and 9.3%, respectively. Furthermore, the new membrane has a permeability of up to 1140.0 L·m-2·h-1·bar-1, and displayed a very stable performance after four repeated uses. The separation mechanism of the PI@PDA@PEI/ZIF-L composite membrane was analyzed further in order to provide a basis to support the production of separation membranes with a high barrier rate and high flux.

Bioinspired Cu(II) Defect Sites in ZIF-8 for Selective Methane Oxidation

Activating the C-H bonds of alkanes without further oxidation to more thermodynamically stable products, CO and CO2, is a long-sought goal of catalytic chemistry. Inspired by the monocopper active site of methane monooxygenase, we synthesized a Cu-doped ZIF-8 metal-organic framework with 25% Cu and 75% Zn in the nodes and activated it by heating to 200 °C and dosing in a stepwise fashion with O2, methane, and steam. We found that it does oxidize methane to methanol and formaldehyde. The catalysis persists through at least five cycles, and beyond the third cycle, the selectivity improves to the extent that no CO2 can be detected. Experimental characterization and analysis were carried out by PXRD, DRUV-vis, SEM, and XAS (XANES and EXAFS). The reaction is postulated to proceed at open-coordination copper sites generated by defects, and the mechanism of methanol production was explicated by density functional calculations with the revMO6-L exchange-correlation functional. The calculations reveal a catalytic cycle of oxygen-activated CuI involving the conversion of two molecules of CH4 to two molecules of CH3OH by a sequence of hydrogen atom transfer reactions and rebound steps. For most steps in the cycle, the reaction is more favored by singlet species than by triplets.

Ion solvation as a predictor of lanthanide adsorption structures and energetics in alumina nanopores

Adsorption reactions at solid-water interfaces define elemental fate and transport and enable contaminant clean-up, water purification, and chemical separations. For nanoparticles and nanopores, nanoconfinement may lead to unexpected and hard-to-predict products and energetics of adsorption, compared to analogous unconfined surfaces. Here we use X-ray absorption fine structure spectroscopy and operando flow microcalorimetry to determine nanoconfinement effects on the energetics and local coordination environment of trivalent lanthanides adsorbed on Al2O3 surfaces. We show that the nanoconfinement effects on adsorption become more pronounced as the hydration free energy, ΔGhydr, of a lanthanide decreases. Neodymium (Nd3+) has the least exothermic ΔGhydr (-3336 kJ·mol-1) and forms mostly outer-sphere complexes on unconfined Al2O3 surfaces but shifts to inner-sphere complexes within the 4 nm Al2O3 pores. Lutetium (Lu3+) has the most exothermic ΔGhydr (-3589 kJ·mol-1) and forms inner-sphere adsorption complexes regardless of whether Al2O3 surfaces are nanoconfined. Importantly, the energetics of adsorption is exothermic in nanopores only, and becomes endothermic with increasing surface coverage. Changes to the energetics and products of adsorption in nanopores are ion-specific, even within chemically similar trivalent lanthanide series, and can be predicted by considering the hydration energies of adsorbing ions.

Glucose-driven transformable complex eliminates biofilm and alleviates inflamm-aging for diabetic periodontitis therapy

Diabetic periodontitis is a major complication of diabetes, which has a deep involvement in teeth loss and more serious systematic diseases, including Alzheimer's disease, atherosclerosis and cancers. Diabetic periodontitis is difficult to treat because of recalcitrant infection and hyperglycemia-induced tissue dysfunction. Current treatments fail to completely eliminate infection due to the diffusion-reaction inhibition of biofilm, and ignore the tissue dysfunction. Here, we design a glucose-driven transformable complex, composed of calcium alginate (CaAlg) hydrogel shell and Zeolitic imidazolate framework-8 (ZIF-8) core encapsulating Glucose oxidase (GOx)/Catalase (CAT) and Minocycline (MINO), named as CaAlg@MINO/GOx/CAT/ZIF-8 (CMGCZ). The reaction product of glucose-scavenging, gluconic acid, could dissolve ZIF-8 core and transform CMGCZ from inflexible to flexible, facilitating the complex to overcome the diffusion-reaction inhibition of biofilm. Meanwhile, reduced glucose concentration could ameliorate the pyroptosis of macrophages to decrease the secretion of pro-inflammatory factors, thereby reducing inflamm-aging to alleviate periodontal dysfunction.

Effective adsorptive removal of sulfamethoxazole (SMX) from aqueous solution by ZIF-8 derived adsorbent ZC-0.5

Efficient removal of antibiotics from the aquatic environment is urgently needed due to their obstinate accumulation and non-biodegradability. In this study, a mesoporous carbon material (ZC-0.5) was successfully synthesized for the adsorption of sulfamethoxazole (SMX), one of the major antibiotics for the treatment of human and animal infections. ZIF-8 as the precursor of ZC-0.5, specifically, using cetyl trimethyl ammonium bromide (CTAB) and sodium laurate (SL) as dual templates and carbonizing at 800 ℃. This novel adsorbent exhibited a high proportion of mesopore (75.64%) and a large specific surface area (1459.73 m²·g^-1). The adsorption experiment examined the reusability of ZC-0.5 and that it could retain superior maximum adsorption capacities (167.45 mg∙L^-1) after five cycles of adsorption and desorption. The adsorption process satisfied the pseudo-second-order kinetic (PSO) and mixed first- and second-order kinetic (MOE). It also satisfied the Freundlich and Sips isotherm models. Moreover, thermodynamic calculation indicated the adsorption process was spontaneous, endothermal, and entropy-increasing. Furthermore, plausible adsorption mechanisms were explained through van der Waals force, electrostatic interaction, hydrophobic force, π-π interaction, and hydrogen bond. This work offers a new efficient adsorbent for antibiotic elimination.

Application of ZIF-8 nanocomposite membrane in microbial desalination cells for simultaneous heavy metal removal and biofouling prevention

Microbial desalination cells (MDC) syndicate the advantage of physical separation by using membranes to create conditions required for Bioelectrochemical processes for the treatment of various domestic and industrial wastewater, while simultaneously desalinating saline water and generating bioenergy. However, since the introduction of this technology, heavy metal removal has been a challenge, and membrane fouling has become a major bottleneck limiting the optimum performance and efficiency of this technology. This study incorporated the use of ZIF-8 nanocomposite membrane via phase inversion mechanism in MDC for simultaneous heavy metal removal and membrane biofouling prevention. The study was conducted in two MDC systems; MDC-Control (without the ZIF-8 nanocomposite membrane) and MDC with ZIF-8 nanocomposite membrane. The results from the experiment shown that maximum removal efficiency of 85.7%, 84.3%, 84.0%, and 90.61% was obtained for Cu²⁺, Zn²⁺, Pb^2+, and Cd²⁺ respectively in MDC-ZIF-8, while MDC control showed 54.17%, 59.71%, 51.94%, and 54.17%. The results were well fitted to the Langmuir adsorption isotherm with correlation coefficients (R²) > 0.99 in all cases for MDC-ZIF-8. A maximum adsorption capacity (Q_max) of 292 mg g^-1 was attained for all four metal ions in MDC-ZIF-8. Besides, after 38 days of continuous operation with two complete desalination for both systems, the SEM-EDS characterization analysis, polarization characteristics, and power generation revealed antifouling characteristics of ZIF-8 nanocomposite membrane incorporated in MDC. The integration of the ZIF-8 nanocomposite membrane proved to be simultaneously efficient in biofouling prevention and heavy metal removal without jeopardizing the system's ability for wastewater treatment, bioelectricity generation, and desalination processes.

The simultaneous removal of co-contaminants pyrene and Cu (II) from aqueous solutions by Fe/Mn bimetallic functionalized mesoporous silica

In recent years, the co-contamination of heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) has attracted more and more attention, and finding efficient and coordinated removal method has been the hot focus. In this study, Fe/Mn-SBA15 bimetallic mesoporous silica adsorbent (Fe/Mn-SBA15) was prepared by hydrothermal method with the functional groups Fe and Mn simultaneously doped into the framework structure of SBA15. Fe/Mn-SBA15 was systematically characterized by XRD, TEM, and BET and used in removal of typical PAHs-pyrene and heavy metal-Cu (II) from aqueous solutions simultaneously. The single and binary adsorption behaviors were studied by kinetics, isotherm, pH, and ionic strength. The results showed that the functional groups of Fe and Mn were successfully loaded into the structure of SBA15 and the prepared adsorbent was still a typical mesoporous adsorbent. The adsorption of pyrene and Cu (II) onto Fe/Mn-SBA15 was fast and the adsorption equilibrium was achieved in 100 min. The Langmuir model fitted the adsorption isotherm better and the maximum adsorption capacities for pyrene and Cu (II) were 120 mg/g and 10.52 mg/g, respectively. The increase of ionic strength could enhance and decrease the adsorption capacity of pyrene and Cu (II), which may be attributed to salting-out effect and potassium competitive. With the increase of pH values, the negative charge on the surface of the adsorbent increased, resulting in the decrease and increase of adsorption capacity of pyrene and Cu (II) onto Fe/Mn-SBA15. In addition, Fe/Mn-SBA15 was found to have a synergistic effect on the adsorption of pyrene and Cu (II). This result is mainly due to the formation of hydration complex by pyrene-Cu (II) through cation-π interaction, which increases the adsorption capacity by occupying each other's adsorption sites of adsorbent. This study provides a new method for the synergistic removal of PAHs and HMs from aqueous solutions.

Carbon dioxide-enhanced metal release from kerogen

Heavy metals released from kerogen to produced water during oil/gas extraction have caused major enviromental concerns. To curtail water usage and production in an operation and to use the same process for carbon sequestration, supercritical CO₂ (scCO₂) has been suggested as a fracking fluid or an oil/gas recovery agent. It has been shown previously that injection of scCO₂ into a reservoir may cause several chemical and physical changes to the reservoir properties including pore surface wettability, gas sorption capacity, and transport properties. Using molecular dynamics simulations, we here demonstrate that injection of scCO₂ might lead to desorption of physically adsorbed metals from kerogen structures. This process on one hand may impact the quality of produced water. On the other hand, it may enhance metal recovery if this process is used for in-situ extraction of critical metals from shale or other organic carbon-rich formations such as coal.

Decorating metal organic framework on nickel foam for efficient Cu2+ removal based on adsorption and electrochemistry

The removal of heavy metal ions in wastewater has a great significance to human health and environment protection. Metal organic framework possesses high surface area, rich porosity, tunable pore size and abundant active sites. However, the intrinsic aggregation and fragility of MOF nanoparticles make its poor adsorption and undesirable reusage. Herein, a facile and unique hot-pressing method is adopted to decorate the MOF nanoparticles on nickel foam (ZIF-8/NF), which simultaneously serves as self-supporting substrate of ZIF-8 nanoparticles and electrode of a self-powered multifunctional purification system. In adsorption, the ZIF-8/NF composite presents high Cu²⁺ removal rate of 49.5% with the concentration of 10 mg/100 ml. More importantly, integrating with electrochemistry, the Cu²⁺ removal rate of the ZIF-8/NF composite reaches 54.7% in 5 min. The superior performance is attributed to the comprehensive effects of ion exchange, chemical bonding and physical adsorption. Moreover, the low-cost, fast and scalable preparation contributes to commercially fabricate MOF nanoparticles on self-supported substrate to treat wastewater with high efficiency and good recyclability.

Highly stable cellulose nanofiber/polyacrylamide aerogel via in-situ physical/chemical double crosslinking for highly efficient Cu(II) ions removal

Water pollution by heavy metal ions is a global concern due to detrimental effects on the ecological environment and human health. To solve the problem of the stability and recyclability of the traditional adsorbents, we proposed three-dimensional lamellar porous cellulose nanofiber/polyacrylamide composite aerogel with outstanding pollutants adsorption, easy regeneration, and multiple recycling. The aerogel adsorbent was prepared by a two-step method via facile in-situ physical/chemical double cross-linking and freeze-drying processes. The resulting aerogels showed good thermal stability, superior water stability and excellent adsorption properties, with a maximum Langmuir adsorption capacity for Cu(II) ions up to 240 mg g^-1 due to the in-situ physical/chemical combination of anionic polyacrylamide and carbonylated cellulose nanofibers. The adsorption mechanism was the electrostatic attraction, chelating effect and complex formation driving forces for the fast and efficient adsorption of Cu(II) ions. The removal efficiency of the aerogels for Cu(II) remained above 80% after 10 adsorption/regeneration cycles, suggesting its outstanding recyclability. The proposed aerogel adsorbent shows noteworthy potential for the practical treatment of heavy metal ion wastewater.

Sonochemical Preparation of a Magnet-Responsive Fe3O4@ZIF-8 Adsorbent for Efficient Cu2+ Removal

This work presents a novel approach to synthesizing magnetic core-shell nanocomposites, consisting of magnetic nanoparticles and a metal-organic framework, for environmental applications. The synthesis is based on the encapsulation of magnetic Fe₃O₄ nanoparticles with microporous zeolitic imidazolate framework-8 (ZIF-8) nanocrystals via ultrasonic activation under a continuous supply of precursor solutions. This sonochemical approach is proven to be a fast, cost-effective, and controllable route for the preparation of magnet-responsive Fe₃O₄@ZIF-8 nanoparticles with a core-shell structure. The functional nanomaterial possesses a high content of ZIF-8 and combined micro/mesoporosity, and thus can be used as adsorbents that can be easily separated using a magnet. In particular, the sonochemically prepared Fe₃O₄@ZIF-8 exhibits significant adsorption performance for the removal of copper ions from water: a short adsorption time (10 min), high maximum uptake capacity (345 mg g⁻¹), and excellent removal efficiency (95.3%). These performances are interpreted and discussed based on the materials characteristics of Fe₃O₄@ZIF-8 established by microscopy, gas sorption, X-ray diffraction, and thermal analysis.

Novel easily separable core–shell Fe3O4/PVP/ZIF-8 nanostructure adsorbent: optimization of phosphorus removal from Fosfomycin pharmaceutical wastewater

The synthesis of an easily separable novel core–shell Fe3O4/PVP/ZIF-8 nanostructure adsorbent and its usage for Fosfomycin pharmaceutical wastewater treatment.

Biological remediation technologies for dyes and heavy metals in wastewater treatment: New insight

The pollution of the environment caused by dyes and heavy metals emitted by industries has become a worldwide problem. The development of efficient, environmentally acceptable, and cost-effective methods of wastewater treatment containing dyes and heavy metals is critical. Biologically based techniques for treating effluents are fascinating since they provide several benefits over standard treatment methods. This review assesses the most recent developments in the use of biological based techniques to remove dyes and heavy metals from wastewater. The remediation of dyes and heavy metals by diverse microorganisms such as algae, bacteria, fungi and enzymes are depicted in detail. Ongoing biological method's advances, scientific prospects, problems, and the future prognosis are all highlighted. This review is useful for gaining a better integrated view of biological based wastewater treatment and for speeding future research on the function of biological methods in water purification applications.

A sensor array based on DNA-wrapped bimetallic zeolitic imidazolate frameworks for detection of ATP hydrolysis products

Most current biosensors were designed for the detection of individual analytes, or a group of chemically similar analytes. We reason that sensors designed to track both reactants and products might be useful for following chemical reactions. Adenosine triphosphate (ATP) is a key biomolecule that participates in various biochemical reactions, and its hydrolysis plays a fundamental role in life. ATP can be converted to adenosine diphosphate (ADP) and inorganic phosphate (Pi) via the dephosphorylation process. ATP can also be hydrolyzed to adenosine monophosphate (AMP) and pyrophosphate (PPi) through depyrophosphorylation, depending on where the bond is cleaved. The detection of ATP-related hydrolysates would enable a better understanding of the different reaction pathways with a high level of robustness and confidence. Herein, we prepared a fluorescent sensor array based on a series of bimetallic zeolite imidazole frameworks M/ZIF-8 (M = Ni, Mn, Cu) and ZIF-67 to discriminate ATP hydrolysis and detect ATP hydrolysis related analytes. A fluorescently-labeled DNA oligonucleotide was used for signaling. Interestingly, Cu/ZIF-8 exhibited an ultrahigh selectivity for recognizing pyrophosphate with a detection limit of 2.5 μM. Moreover, the practicality of this sensor array was demonstrated in fetal bovine serum, clearly discriminating ATP hydrolysis products.

Recent advances in the application of water-stable metal-organic frameworks: Adsorption and photocatalytic reduction of heavy metal in water

Heavy metals pollution in water is a global environmental issue, which has threatened the human health and environment. Thus, it is important to remove them under practical water environment. In recent years, metal-organic frameworks (MOFs) with water-stable properties have attracted wide interest with regard to the capture of hazardous heavy metal ions in water. In this review, the synthesis strategy and postsynthesis modification preparation methods are first summarized for water-stable MOFs (WMOFs), and then the recent advances on the adsorption and photocatalytic reduction of heavy metal ions in water by WMOFs are reviewed. In contrast to the conventional adsorption materials, WMOFs not only have excellent adsorption properties, but also lead to photocatalytic reduction of heavy metal ions. WMOFs have coupling and synergistic effects on the adsorption and photocatalysis of heavy metal ions in water, which make it more effective in treating single pollutants or different pollutants. In addition, by introducing appropriate functional groups into MOFs or synthesizing MOF-based composites, the stability and ability to remove heavy metal ions of MOFs can be effectively enhanced. Although WMOFs and WMOF-based composites have made great progress in removing heavy metal ions from water, they still face many problems and challenges, and their application potential needs to be further improved in future research. Finally, this review aims at promoting the development and practical application of heavy metal ions removal in water by WMOFs.

Adsorption of cupric, cadmium and cobalt ions from the aqueous stream using the composite of iron(II,III) oxide and zeolitic imidazole framework-8

In recent research, the composite of Fe₃O₄ and metal-organic frameworks have shown great potential in removing potentially toxic metals from water. We conducted the adsorption studies of potentially toxic metal ions (Cu²⁺, Co²⁺ and Cd²⁺) using the composite of Fe₃O₄ and zeolitic imidazole framework-8 (Fe₃O₄@ZIF-8) for the first time. The solvothermal technique was used to synthesize the Fe₃O₄. The magnetic ZIF-8 offers high thermal stability, greater adsorption surface, good removability, and high chemical and thermal stability. Characterization techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR) were used to characterize the synthesized samples. The SEM and XRD results revealed the high purity and structural integrity of ZIF-8 crystallites. To remove potentially toxic metals (Cu²⁺, Co²⁺ and Cd²⁺), the influence of adsorbent dosage, contact time, pH, and adsorbate concentration on the adsorption performance of Fe₃O₄@ZIF-8 was investigated. The Langmuir isotherm accurately represented the adsorption processes, with absorption magnitudes of Fe₃O₄@ZIF-8 determined to be 46.82 mg g^-1, 71.29 mg g^-1 and 54.49 mg g^-1 for Cu²⁺, Co²⁺ and Cd²⁺, respectively. According to the adsorption mechanism analysis, the primary Cu²⁺, Co²⁺ and Cd²⁺ removal methods of Fe₃O₄@ZIF-8 were ion exchange and coordination bonds. The uptake capacity of Cu²⁺, Co²⁺ and Cd²⁺ solution by Fe₃O₄@ZIF-8 were not significantly affected by the presence of counter ions. The material exhibited superior regenerative properties for Cu²⁺, Co²⁺ and Cd²⁺ ions from water for up to three cycles. This study concluded that the Fe₃O₄@ZIF-8 could be a viable candidate for eliminating potentially toxic metals (Cu²⁺, Co²⁺ and Cd²⁺).

Application of zeolitic imidazolate framework for hexavalent chromium removal: A feasibility and mechanism study

The mechanisms and effectiveness of using zeolitic imidazolate framework (ZIF-8) [a sub-family of metal-organic framework (MOF)] particles on hexavalent chromium [Cr(VI)] removal were evaluated. The ultrasonic mixing method was applied for the preparation of ZIF-8, and chemicals used for ZIF-8 synthesis included ammonium hydroxide, zinc nitrate hexahydrate, and 2-methylimidazole. ZIF-8 particle had a clear rhombic dodecahedron morphology shape and a strong peak intensity with high crystallinity. The adsorption capacity (AC) of ZIF-8 was 30.3 mg of Cr(VI)/g of ZIF-8 [Cr(VI) = 50 mg/L]. The AC of Cr(VI) raised to 34.3 mg/g under acidic conditions (pH = 5), and the AC dropped to below 13.7 mg/g with a pH range from 7 to 11. It could be because of the competitive effects between CrO₄ ^2- and hydroxide ions for adsorption locations of ZIF-8. Cr(VI) removal relied on the amount of Cr(VI) adsorbed on the particles of ZIF-8, and the mechanisms of Cr(VI) adsorption by ZIF-8 included chemical/physical processes and the rate-limiting step was the chemical adsorption. A fraction of sorbed Cr(VI) was reduced to Cr(III), and thus, ZIF-8 could serve as a reducing agent during Cr(VI) reduction. Cr(VI) was removed effectively from the water phase by ZIF-8 via adsorption and reduction mechanisms. PRACTITIONER POINTS: ZIF-8 particles had an adsorption capacity of 30.33 mg of Cr(VI)/g of ZIF-8. Cr(VI) sorption by ZIF-8 has chemical (rate-limiting step) and physical processes. ZIF-8 can serve as a reducing agent for Cr(VI) reduction. Cr(VI) can be removed by ZIF-8 via the adsorption and reduction mechanisms.

Fabrication of in situ ZIF-67 grown on alginate hydrogels and its application for enhancing Cu (II) adsorption from aqueous solutions

Synthesizing high uniform metal-organic frameworks grown on natural biomass such as sodium alginate (ALG), which can efficiently remove metal ions from aqueous solution, is a challenging project. A simple and eco-friendly method of preparing ALG@ZIF-67 hydrogels by in situ synthesis of ZIF-67 onto ALG hydrogels was established. Combining the virtues of ALG with abundant hydroxyl and carboxyl groups and ZIF-67 with excellent porous structure, the obtained ALG@ZIF-67 hydrogels have excellent adsorption for Cu²⁺ (153.63 mg/g), which was much higher than that of pure ALG hydrogels (111.79 mg/g). The methodology showed that the adsorption process was in accord with the Langmuir isotherm adsorption model (R² = 0.9972) and pseudo-second-order kinetic model (R² = 0.9822). The thermodynamic experiments demonstrated that Cu (II) was absorbed by hydrogel with an endothermic and spontaneous process. The competitive adsorption experiment results of ALG@ZIF-67 hydrogel indicated that the absorption capacity of Cu (II) was higher than that of Cd (II), Ni (II), Zn (II) and Mn (II). Moreover, the ALG@ZIF-67 hydrogels still had excellent reusability after five adsorption-desorption cycles. The results indicated that the ALG@ZIF-67 hydrogels had the advantages of low cost, easy preparation, and environment friendly.

Adsorptive removal of heavy metals from battery industry effluent using MOF incorporated polymeric beads: A combined experimental and modeling approach

In this study, the metal organic framework (MOF) ZIF-8 was investigated as potential adsorbent for heavy metal ions. The MOF powder was used further to prepare mixed matrix beads (MMBs) using polysulfone as the base material. Both the MOF powder and the MMBs were characterized using Field emission scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller (BET) analyzer and zetasizer. Adsorption capacity of the MMBs were 164-220 mg/g for Pb and 92-161 mg/g for Cd. A fundamental pore diffusion-adsorption model was used to predict the batch kinetics for both single and multicomponent cases and effective pore diffusivities and mass transfer coefficients were determined. Mutual interactions among heavy metals were quantified using interaction parameters. ZIF-8, incorporated in the PSF matrix, plays the predominant role in capturing the metal ions through surface complexation with the NH and metal-OH groups. A first principle-based model involving convection, diffusion and adsorption was used to quantify the breakthrough behavior for the continuous fixed bed column using the MMBs. The column performance was tested with battery industry effluent. The saturated beads were suitably regenerated using 0.1(M) HCl solution. Finally, the model parameters were used for scaling up of the columns.

Sustainable Application of ZIF-8 for Heavy-Metal Removal in Aqueous Solutions

Water is life, and clean-water demand is increasing daily as a result of rapid population growth and industrial evolution. Nevertheless, due to the inadequate supply and availability of new water sources, there is a need for effective, sustainable removal of contaminants for wastewater reuse. Several treatment approaches that include chemical, physical, and biological methods have been thoroughly tested, with biological treatment being regarded as the most cost-effective and environmentally friendly method. However, the presence of heavy metals and complicated chemicals that are nonbiodegradable limits the use of this cost-effective approach. In this paper, we review the sustainable application of a cheap, water-stable metal-organic framework, the zeolitic imidazolate framework (ZIF-8), with an easier synthesis approach for heavy-metal removal in aqueous solutions. In this review, we discuss the removal efficiency in terms of adsorption capacity, describe the underlying mechanism behind the adsorption capacity of ZIF-8, present a sustainable synthesis approach, and make vital suggestions to aid in the future application of ZIF-8 for the removal of heavy metals.

Metal-organic frameworks based adsorbents: A review from removal perspective of various environmental contaminants from wastewater

Rapidly increasing water contamination has turned into a major threat globally. The pollutants such as organic and inorganic compounds, heavy metals, and biological organisms are among the major contributor to water pollution. Therefore, the removal of these contaminants has attracted the researchers a lot. Various methodologies are being carried out for the purpose. Among them, the metal-organic frameworks (MOFs) with several active sites and tailorable porous architectures as adsorbents or photocatalytic removal agents is a fast-growing class of coordination chemistry to remove these agents from water. To date, numerous approaches dealing with water treatment including conservative and advanced technologies have been presented. This article thoroughly reviews the application of MOFs toward how to remove the toxic agents from water. The leading objective is to present up-to-date information and references regarding MOFs based materials toward wastewater treatment applications.

Highly recyclable cysteamine-modified acid-resistant MOFs for enhancing Hg (II) removal from water

Thiol-functionalized metal-organic frameworks (MIL-101-SH and UiO-66-SH) were synthesized by a post-synthetic modification method as the proper adsorbents for Hg (II) removal from water. This facile method for the synthesis of UiO-66-SH was developed via a condensation reaction between cysteamine and carboxyl groups present in the framework of UiO-66-COOH. MIL-101 was functionalized by grafting amine group of cysteamine on coordinatively unsaturated chromium ions centres, yielding to MIL-101-SH adsorbents. These two types of thiol-functionalized MOFs samples by cysteamine-modified were characterized by XRD, XPS, FTIR and N₂ adsorption-desorption isotherms respectively, which prove the successful modification of the thiol groups. The maximum adsorption capacities of mercury ions for UiO-66-SH and MIL-101-SH adsorbents were 110 and 250 mg/g at pH of 5, respectively. Moreover, the acidic medium could effectively elute Hg (II) and the adsorbents can be well reusable.