Enhanced Congo red dye removal from aqueous solutions using iron nanoparticles: adsorption, kinetics, and equilibrium studies

Removal of dyes from wastewater using Eucalyptus wood fiber loaded nanoscale zero-valent iron: Characterization and removal mechanism

Wood fiber as a natural and renewable material has low cost and plenty of functional groups, which owns the ability to adsorb dyes. In order to improve the application performance of wood fiber in dye-pollution wastewater, Eucalyptus wood fiber loaded nanoscale zero-valent iron (EWF-nZVI) was developed to give EWF magnetism and the ability to degrade dyes. EWF-nZVI was characterized via FTIR, XRD, zeta potential, VSM, SEM-EDS and XPS. Results showed that EWF-nZVI owned a strong magnetism of 96.51 emu/g. The dye removal process of EWF-nZVI was more in line with the pseudo-second-order kinetics model. In addition, the Langmuir isotherm model fitting results showed that the maximum removal capacities of Congo red and Rhodamine B by EWF-nZVI were 714.29 mg/g and 68.49 mg/g at 328 K, respectively. After five adsorption-desorption cycles, the regeneration efficiencies of Congo red and Rhodamine B were 74 % and 42 % in turn. The dye removal mechanisms of EWF-nZVI included redox degradation (Congo red and Rhodamine B) and electrostatic adsorption (Congo red). In summary, EWF-nZVI is a promising biomass-based material with high dye removal capacities. This work is beneficial to promote the large-scale application of wood fiber in water treatment.

Tecoma stans floral extract-mediated synthesis of MgFe2O4/ZnO nanoparticles for adsorption and photocatalytic degradation of coomassie brilliant blue dye

Toxic organic dyes-containing wastewater treatment by adsorption and photocatalytic techniques is widely applied, but adsorbents and photocatalysts are often synthesized through chemical methods, leading to secondary pollution by released chemicals. Here, we report a benign method using Tecoma stans floral extract to produce MgFe2O4/ZnO (MGFOZ) nanoparticles for adsorption and photocatalytic degradation of coomassie brilliant blue (CBB) dye. Green MGFOZ owned a surface area of 9.65 m2/g and an average grain size of 54 nm. This bio-based nanomaterial showed higher removal percentage and better recyclability (up to five cycles) than green MgFe2O4 and ZnO nanoparticles. CBB adsorption by MGFOZ was examined by kinetic and isotherm models with better fittings of Bangham and Langmuir or Temkin. RSM-based optimization was conducted to reach an actual adsorption capacity of 147.68 mg/g. Moreover, MGFOZ/visible light system showed a degradation efficiency of 89% CBB dye after 120 min. CBB adsorption can be controlled by both physisorption and chemisorption while •O2- and •OH radicals are responsible for photo-degradation of CBB dye. This study suggested that MGFOZ can be a promising adsorbent and catalyst for removal of organic dyes in water.

Piper chaba Stem Extract Facilitated the Synthesis of Iron Oxide Nanoparticles as an Adsorbent to Remove Congo Red Dye

In this study, a straightforward, eco-friendly, and facile method for synthesizing iron oxide nanoparticles (IONPs) utilizing Piper chaba steam extract as a reducing and stabilizing agent has been demonstrated. The formation of stable IONPs coated with organic moieties was confirmed from UV-vis, FTIR, and EDX spectroscopy and DLS analysis. The produced IONPs are sufficiently crystalline to be superparamagnetic having a saturation magnetization value of 58 emu/g, and their spherical form and size of 9 nm were verified by XRD, VSM, SEM, and TEM investigations. In addition, the synthesized IONPs exhibited notable effectiveness in the removal of Congo Red (CR) dye with a maximum adsorption capacity of 88 mg/g. The adsorption kinetics followed pseudo-second-order kinetics, meaning the adsorption of CR on IONPs is mostly controlled by chemisorption. The adsorption isotherms of CR on the surface of IONPs follow the Langmuir isotherm model, indicating the monolayer adsorption on the homogeneous surface of IONPs through adsorbate-adsorbent interaction. The IONPs have revealed good potential for their reusability, with the adsorption efficiency remaining at about 85% after five adsorption-desorption cycles. The large-scale, safe, and cost-effective manufacturing of IONPs is made possible by this environmentally friendly process.

Adsorption of contaminants by nanomaterials synthesized by green and conventional routes: a critical review

Nanomaterials, due to their large surface area and selectivity, have stood out as an alternative for the adsorption of contaminants from water and effluents. Synthesized from green or traditional protocols, the main advantages and disadvantages of green nanomaterials are the elimination of the use of toxic chemicals and difficulty of reproducing the preparation of nanomaterials, respectively, while traditional nanomaterials have the main advantage of being able to prepare nanomaterials with well-defined morphological properties and the disadvantage of using potentially toxic chemicals. Thus, based on the particularities of green and conventional nanomaterials, this review aims to fill a gap in the literature on the comparison of the synthesis, morphology, and application of these nanomaterials in the adsorption of contaminants in water. Focusing on the adsorption of heavy metals, pesticides, pharmaceuticals, dyes, polyaromatic hydrocarbons, and phenol derivatives in water, for the first time, a review article explored and compared how chemical and morphological changes in nanoadsorbents synthesized by green and conventional protocols affect performance in the adsorption of contaminants in water. Despite advances in the area, there is still a lack of review articles on the topic.

Nanoarchitectonics of Bimetallic MOF@Lab-Grade Flexible Filter Papers: An Approach Towards Real-Time Water Decontamination and Circular Economy

This study presents a novel approach to decontaminate ferrocyanide-contaminated wastewater. The work effectively demonstrates the use of bimetallic Mo/Zr-UiO-66 as a super-adsorbent for rapid sequestration of Prussian blue, a frequently found iron complex in cyanide-contaminated soils/groundwater. The exceptional performance of Mo/Zr-UiO-66 is attributed to the insertion of secondary metallic sites, which deliver synergistic effects, benefiting the inherent qualities of the framework. Moreover, to extend the industrial applications of metal-organic frameworks (MOFs) in real-world scenarios, an approach is delivered to structure the nanocrystalline powders into MOF-based macrostructures. The work demonstrates an interfacial process to develop continuous MOF nanostructures on ordinary laboratory-grade filter papers. The novelty of the work lies in the development of robust free-standing filtration materials to purify PB dye-contaminated water. Additionally, the work embraces a circular economy concept to address problems related to resource scarcity, excessive waste production, and maintenance of economic benefits. Consequently, the PB dye-loaded adsorbent waste is re-employed for the adsorption of heavy metals (Pb2+ and Cd2+ ). Simultaneously, the study aims to address the problems related to the real-time handling of powdered adsorbents, and the generation of ecologically harmful secondary waste, thereby, progressing toward a more sustainable system.

Emerging micropollutants in aquatic ecosystems and nanotechnology-based removal alternatives: A review

There is a significant concern about the accessibility of uncontaminated and safe drinking water, a fundamental necessity for human beings. This concern is attributed to the toxic micropollutants from several emission sources, including industrial toxins, agricultural runoff, wastewater discharges, sewer overflows, landfills, algal blooms and microbiota. Emerging micropollutants (EMs) encompass a broad spectrum of compounds, including pharmaceutically active chemicals, personal care products, pesticides, industrial chemicals, steroid hormones, toxic nanomaterials, microplastics, heavy metals, and microorganisms. The pervasive and enduring nature of EMs has resulted in a detrimental impact on global urban water systems. Of late, these contaminants are receiving more attention due to their inherent potential to generate environmental toxicity and adverse health effects on humans and aquatic life. Although little progress has been made in discovering removal methodologies for EMs, a basic categorization procedure is required to identify and restrict the EMs to tackle the problem of these emerging contaminants. The present review paper provides a crude classification of EMs and their associated negative impact on aquatic life. Furthermore, it delves into various nanotechnology-based approaches as effective solutions to address the challenge of removing EMs from water, thereby ensuring potable drinking water. To conclude, this review paper addresses the challenges associated with the commercialization of nanomaterial, such as toxicity, high cost, inadequate government policies, and incompatibility with the present water purification system and recommends crucial directions for further research that should be pursued.

Synthesis & fabrication of O-linked polymeric hybrids for recovery of textile dyes: Closed loop economy

Dyes are an important resource employed for the production systems in textile, paper, paint and leather industry. An estimate of 200,000 tons of dyes are discharged as textile effluent each year worldwide. It becomes imperative to recover these dyes by treating the effluents using economically viable routes. The present research was undertaken with the objective to attain zero emission and zero waste through development of novel polymeric hybrids as adsorbents. For this purpose, metal moieties (Al3+, Si4+, Ti4+ and Zr4+) were hybridized with polyacrylic acid, and cellulose acetate for the uptake of selected dyes under optimized parameters. The structural elucidation of four synthesized hybrids (MP-Al, MP-Si, MP-Ti and MP-Zr) by FTIR, EDX and TGA confirmed O-linked grafting of metal moieties with polymers and thermally stable porous materials. SEM micrographic images displayed void spaces providing channels for effective adsorption. The batch experiments demonstrated removal of malachite green (77-96%) and congo red (70-82%) upon contact of initial 45 min on polymeric hybrids On the other hand, pristine polyacrylic acid and cellulose acetate showed remarkably low removal of dyes. The adsorption mechanism is proposed as physical in nature following type II isotherm. Further, Langmuir and Ho's pseudo second order fitness was evaluated. In order to determine the economic viability of the present research, the real textile dyes were recovered in three consecutive cycles of adsorption and chemical treatment of hybrids. The results propose a system with positive impact on economy by maximum utilization of hybrids as adsorbents and recovery of textile dyes for reuse in textile processing.

An economical electrocoagulation process of a hazardous anionic azo dye wastewater with the combination of recycled electrodes and solar energy

The energy and electrode costs are the restrictions of applying electrocoagulation (EC) in wastewater treatment and many attempts have been made to decrease these costs. In this study, an economical EC was investigated to treat a hazardous anionic azo dye wastewater (DW) that threatens the environment and human health. Firstly, an electrode for EC process was produced from recycled aluminum cans (RACs) by remelting in an induction melting furnace. The performance of the RAC electrodes in the EC was evaluated for COD, color removal, and the EC operating parameters such as initial pH, current density (CD), and electrolysis time. Response surface methodology which is based on central composite design (RSM-CCD) was used for the optimization of the process parameters which were found to be pH 3.96, CD 15 mA/cm², and electrolysis time 45 min. The maximum COD and color removal values were determined as 98.87% and 99.07%, respectively. The characterization of electrodes and the EC sludge was conducted by XRD, SEM, and EDS analyses for the optimum variables. In addition, the corrosion test was conducted to determine the theoretical lifetime of the electrodes. The results showed that the RAC electrodes show an extended lifetime as compared to their counterparts. Secondly, the energy cost required to treat DW in the EC was aimed to decrease by using solar panels (PV), and the optimum number of PV for the EC was determined by the MATLAB/Simulink. Consequently, the EC with low treatment cost was proposed for the treatment of DW. An economical and efficient EC process for waste management and energy policies was investigated in the present study which will be instrumental in the emergence of new understandings.

Synthesizing nanoparticles of zinc and copper ferrites and examining their potential to remove various organic dyes through comparative studies of kinetics, isotherms, and thermodynamics

Nanoparticles of zinc ferrite (ZnFe₂O₄) and copper ferrite (CuFe₂O₄) were synthesized, and characterized, and these materials were applied for removal of organic dyes of alizarin yellow R (AYR), thiazole yellow G (TYG), Congo red (CR), and methyl orange (MO) from industrial wastewater through adsorption technique. Synthesis of ZnFe₂O₄ and CuFe₂O₄ was achieved through chemical co-precipitation method. These nanomaterials were characterized for physicochemical properties using XRD, FTIR, BET, VSM, DLS, Zeta-potential, and FESEM-EDX analytical instruments. BET surface areas of ZnFe₂O₄ and CuFe₂O₄ were 85.88 m²/g and 41.81 m²/g, respectively. Adsorption-influencing parameters including effect of solution pH, adsorbent quantity, initial concentration of dye pollutant, and contact time were examined. Acidic medium of the solution favored higher percentage of removal of dyes in wastewater. Out of different isotherms, Langmuir equilibrium isotherm showed the best fit with experimental data, indicating monolayer adsorption in the treatment process. The maximum monolayer adsorption capacities were found as 54.58, 37.01, 29.81, and 26.83 mg/g with ZnFe₂O₄, and 46.38, 30.06, 21.94, and 20.83 mg/g with CuFe₂O₄ for AYR, TYG, CR, and MO dyes, respectively. From kinetics analysis of the results, it was inferred that pseudo-second-order kinetics were fitting well with better values of coefficient of determination (R²). The removal of four organic dyes from wastewater through adsorption technique using nanoparticles of ZnFe₂O₄ and CuFe₂O₄ was observed to be spontaneous and exothermic. From this experimental investigation, it has been inferred that magnetically separable ZnFe₂O₄ and CuFe₂O₄ could be a viable option in removal of organic dyes from industrial wastewater.

The high efficient Sb(III) removal by cauliflower like amorphous nanoscale zero-valent iron (A-nZVI)

In this study, cauliflower like amorphous nanoscale zero-valent iron (A-nZVI) was prepared and its performance on the removal of Sb(III) was investigated and compared with that of nZVI. The results indicated that the removal of Sb(III) by nZVI and A-nZVI followed the pseudo-second-order kinetic model and Langmuir isotherm model, but the removal of Sb(III) by A-nZVI was more stable and its removal capacity (558.2 mg/g) is much higher than that of nZVI (91.3 mg/g). Moreover, the effects of initial Sb(III) concentration, initial pH and anions such as Cl^-, NO₃^-, SO₄^2-, PO₄^3-, and AsO₄^3- were also investigated. A-nZVI showed extremely high selectivity towards Sb(III) in that 500 mg/L of AsO₄^3- and PO₄^3- shows little impact on its removal, while the removal of Sb(III) by nZVI was almost inhibited under the same condition. The combination of SEM-EDS, XPS, XRD and FTIR revealed the removal of Sb(III) by nZVI and A-nZVI were synergistic effects of oxidation and adsorption, but less Sb(III) (39.5%) was oxidized by A-nZVI. More γ-FeOOH and γ-Fe₂O₃ were formed at the surface of A-nZVI during the reaction. Both oxides have high affinity toward Sb(III), which might cause the higher removal capacity and selectivity for the removal of Sb(III) by A-nZVI. In conclusion, A-nZVI showed great potential for the remediation of Sb(III) in groundwater.

Efficient extraction of U(VI) from uranium enrichment process wastewater by amine-aminophosphonate-modified polyacrylonitrile fibers

The enrichment and recovery of U(VI) from low-level radioactive wastewater in the process of uranium enrichment is important for the sustainable development of nuclear energy and environmental protection. Herein, a novel amine-aminophosphonate bifunctionalized polyacrylonitrile fiber (AAP-PAN), was prepared for the extraction of U(VI) from simulated and real uranium-containing process wastewater. The AAP-PAN fiber demonstrated a maximum adsorption capacity of 313.6 mg g^-1 at pH = 6.0 and 318 K in the batch experiments. During the dynamic column experiment, over 99.99% removal of U(VI) could be achieved by the fiber using multi-ion simulated solution and real wastewater with an excellent saturation adsorption capacity of 132.0 mg g^-1 and 72.5 mg g^-1, respectively. It also exhibited an outstanding reusability for at least 5 cycles of adsorption process. The mechanism for U(VI) removal was studied by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis in the assist of simulation calculation. It suggested that the amine and aminophosphonate groups can easily bind uranyl ions due to U(VI) is more likely to combine with oxygen atoms of CO and PO, respectively.

Construction of a 3D Metal-Organic Framework and Its Composite for Water Remediation via Selective Adsorption and Photocatalytic Degradation of Hazardous Dye

In this work, a new bimetallic Na(I)-Zn(II) metal-organic framework (MOF), formulated as [Na₂Zn₃(btc)₂(μ-HCOO)₂(μ-H₂O)₈] _n (1) (H₃btc = benzene tricarboxylic acid), and its composite (ZnO@1) have been successfully synthesized using solvothermal and mechanochemical solid grinding methods. 1 and ZnO@1 were characterized by diffraction [single-crystal X-ray diffraction (XRD) and powder XRD], spectroscopic (ultraviolet-visible diffuse reflectance spectroscopy and Fourier transform infrared spectroscopy), microscopic (transmission electron microscopy), and thermal (thermogravimetric analysis) methods. The surface area and porosity of 1 were determined using a Brunauer-Emmett-Teller analyzer. Single-crystal diffraction of 1 confirms that Na1 and Zn2 have octahedral coordination environments, whereas Zn1 has a tetrahedral coordination geometry. Topological simplification of 1 shows a 3,6-connected kgd net. Na(I)-Zn(II) MOF (1) is crystallized with slight porosity and exhibits good tendency toward the encapsulation of zinc oxide nanoparticles (ZnO NPs). The photocatalytic behaviors of 1 and its composite (ZnO@1) were investigated over MB dye under sunlight illumination with promising degradation efficiencies of 93.69% for 1 and 97.53% for ZnO@1 in 80 min.

Preparation of amine-functionalized lignins for the selective adsorption of Methylene blue and Congo red

Research on low-cost bio-adsorbents for the removal of harmful substances from effluents has recently attracted significant attention. In this study, three types of amino-silane-modified lignins (ASLs) with primary, secondary, and tertiary amine groups were prepared, and their adsorption behavior toward cationic and anionic dyes was investigated. Chemical structural analyses indicated that the three amino-silane reagents resulted in different molecular self-assembly structures on the lignin surface. The ASLs exhibited enhanced thermal stabilities and increased surface areas with different surface charges in different pH ranges. Owing to the high density of primary, secondary, and tertiary amine groups, the ASLs exhibited excellent adsorption capacities for cationic and anionic dyes. Additionally, they selectively adsorb anionic and cationic dyes according to the pH conditions. The ASL with primary amine had the highest adsorption capacity for Methylene blue and Congo red, reaching 187.27 and 293.26 mg·g^-1, respectively, followed by ASLs with the secondary amine and tertiary amine. All adsorption processes followed the Langmuir and Temkin isotherms and had pseudo-second-order kinetics. The hypothesized adsorption mechanism mainly involves electrostatic interaction, NH-π interaction, hydrogen bonding interaction and π-π interaction.

Chitosan capped trimetallic nanoparticles: Synthesis and their Congo red adsorbing activities

Chitosan capped Fe⁰-based Fe-Pd-Ir (Chi-Fe-Pd-Ir) tri-metallic nanoparticles were fabricated using metal displacement method in presence of sodium borohydride. The preliminary indications of Fe⁰ production were the appearance of pale yellow color with ferric nitrate, NaBH₄, and chitosan. Chitosan was detected by using ninhydrin color test, thermal gravimetric analysis and measurement of relative viscosity. The average molecular weight of chitosan and Chi-Fe-Pd-Ir decreased with increased potassium persulfate concentration. Chi-Fe-Pd-Ir used as an adsorbent for the removal of Congo red. The sorption equilibrium data were fitted into Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherms (DRK). The maximum monolayer adsorption capacity (Q⁰_max), and sorption intensity (n) were estimated to be 93.4 mg/g and 2.0, respectively, from Langmuir and Freundlich adsorption isotherm models. The mean free energy was calculated by using DRK isotherm to be 0.15 kJ/mol. Sorption parameters indicate that the Congo red adsorbed on the surface of Chi-Fe-Pd-Ir through monolayer formation via physisorption process. The adsorption of CR on Chi-Fe-Pd-Ir was in good agreement with the Langmuir adsorption isotherm and pseudo-second-order kinetic model. Protonated amino group of chitosan was also responsible for the adsorption of anionic CR along with the Fe-Pd-Ir NPs.

Adsorptive potential of iron oxide based nanocomposite for the sequestration of Congo red from aqueous solution

The ability of polypyrrole-Iron oxide-seaweed nanocomposite has been tested for the removal of congo red from aqueous solution. The characteristics of nanocomposite after adsorption of Congo red (CR) have been analyzed. FTIR results authorized the involvement of various functional groups in the adsorption of CR. The change in morphology of nanocomposite was analyzed using scanning electron microscope (SEM). TEM and BET analysis were performed to characterize the nanocomposite. The effect of various parameters namely pH, adsorbent dosage, initial dye concentration, adsorption time and temperature are studied. The optimum condition for the effective removal of CR are: pH-3, initial CR concentration- 40 mg/L, nanocomposite dosage- 20 mg, contact time-40 min and temperature-40^οC. Adsorption isotherm studies and kinetic studies were done. Langmuir isotherm fits with the experimental data very well with high coefficient of determination (R² = 0.98) and maximum dye uptake of 500 mg/g is reported. In kinetic studies, pseudo second order model was obeyed (R² = 0.994). Thermodynamic properties were determined and found that the nature of process is spontaneous, endothermic and increased in randomness. The mechanism of sorption was proposed. Desorption studies were carried out and showed that the nanocomposite could be effectively reused up to five cycles. Thus the outcomes proved that the polypyrrole-iron oxide-seaweed nanocomposite to be an operative, recyclable and low-cost adsorbent for the treatment of dye bearing water.

Synthesis of new Zn-decorated metal-organic frameworks for enhanced removal of carcinogenic textile dye: equilibrium and kinetic modeling studies

This paper describes the synthesis and characterization of Zn²⁺ decorated (adipic and terephthalic acid as linkers) piperazine-based metal-organic framework (P-MOFs) and their extraction behavior toward the Chicago sky blue (CSB) dye. The formation of Zn²⁺-decorated P-MOFs was confirmed by FT-IR spectroscopy, energy-dispersive spectroscopy, X-ray diffraction, BET surface area analysis and TGA. Adsorption behavior of the synthesized P-MOFs was explored through solid-phase adsorption (batch method) prior to UV-Vis spectrophotometric determination. Adsorption parameters, including adsorbent dosage, pH of solution, dye concentration, and time, were optimized. Excellent percentage removal of 94% and 95% for AP-Zn-MOF and TP-Zn-MOF, respectively, was achieved at pH 7.5. Kinetics studies indicated that the synthesized adsorbents AP-Zn-MOF and TP-Zn-MOF followed the pseudo-second-order rate model with R² value 0.9989. The Freundlich isotherm with high R² value as compared to Langmuir isotherm indicated that CSB adsorption for the synthesized MOFs follows multilayer adsorption.

Cerium based UiO-66 MOF as a multipollutant adsorbent for universal water purification

Herein, we demonstrate the use of cerium (Ce)-UiO-66 metal organic framework (MOF) for the removal of a variety of potentially toxic pollutants. The Ce-UiO-66 MOF, with similar framework topologies to Zr-UiO-66, has not been explored for its adsorptive properties in water remediation. The replacement of Zr metal center with Ce yields a MOF that can be synthesized in shorter durations with lesser energy consumptions and with excellent multipollutant adsorption properties. Further, the Ce-UiO-66 MOF was also studied for its adsorption abilities in the binary component system. Interestingly, the adsorbent showed higher adsorption capacities in the presence of other pollutants. Removal studies for other potentially toxic anionic and cationic dyes showed that the Ce-UiO-66 MOF has a wide range of contaminant removal abilities. Investigations of individual adsorption capacities revealed that the Ce-UiO-66 MOF has a maximum adsorption capacity of 793.7 mg/g for congo red (CR), 110 mg/g for methylene blue (MB), 66.1 mg/g for fluoride (F^-), 30 mg/g for Cr⁶⁺ and 485.4 mg/g for the pharmaceutical waste diclofenac sodium (DCF). To imply the practical applications of the Ce-UiO-66 MOF we have also demonstrated an adaptable filter that could separate all the potentially toxic pollutants.

Optimizing Fe-Based Metal-Organic Frameworks through Ligand Conformation Regulation for Efficient Dye Adsorption and C2 H2 /CO2 Separation

Regulating the structure of metal-organic frameworks (MOFs) by adjusting the ligands reasonably is expected to enhance the interaction of MOFs on special molecules/ions, which has significant application value for the selective adsorption of guest molecules. Herein, two tricarboxylic ligands H₃ L-Cl and H₃ L-NH₂ were designed and synthesized based on the ligand H₃ TTCA by replacing part of the benzene rings with C=C bonds and modifying the chlorine and amino groups on the 4-position of the benzene ring. Two 3D Fe-MOFs (UPC-60-Cl and UPC-60-NH₂ ) with the new topology types were constructed. As the C=C bonds of the ligands have flexible torsion angles, UPC-60-Cl features three types of irregular 2D channels, while UPC-60-NH₂ has a cage with two types of windows on the surface. The synergistic effect of unique channels and modification of functional groups endows UPC-60-Cl and UPC-60-NH₂ with high adsorption capacity for organic dyes. Compound UPC-60-Cl shows high adsorption capacity for CV (147.2 mg g^-1 ), RHB (100.3 mg g^-1 ), and MO (220.9 mg g^-1 ), whereas UPC-60-NH₂ exhibits selective adsorption of MO (158.7 mg g^-1 ). Meanwhile, based on the diverse pore structure and modification of active sites, UPC-60-Cl and UPC-60-NH₂ show the selective separation of equimolar C₂ H₂ /CO₂ . Therefore, reasonable regulation of organic ligands plays a significant role in guiding the structure diversification and performance improvement of MOFs.

Nanomodified sugarcane bagasse biosorbent: synthesis, characterization, and application for Cu(II) removal from aqueous medium

Biosorption is a technique widely used in the remediation of contaminated effluents, and its main advantages are its easy applicability, high efficiency rate, versatility, and its economic viability. Associated with nanotechnology, this work proposes the use of nanocomposites of sugarcane bagasse (SB) and ferromagnetic nanoparticles (Fe₃O₄) in the removal of metallic ions present in contaminated water. SB is a promising adsorbent material since it is an abundant agricultural residue, easily accessed. By using the coprecipitation method, two nanocomposites were obtained from in natura (SB-NP) or acid-treated (MSB-NP) sugarcane bagasse. These materials were synthetized by impregnation of Fe₃O₄ to gain paramagnetic properties and to facilitate the removal of the contaminant-containing adsorbent. The characterization of the nanocomposites was performed using pH_PCZ, FTIR, XRD, and SEM/EDS techniques, to evaluate the synthesis efficiency and investigate the morphology of the materials. The efficiency of magnetite impregnation on the SB was assessed by SEM/EDS and XRD, while the main functional groups (carbonyl, carboxyl, hydroxyl, amine, amide, and nitrate) responsible for adsorption were found by FTIR. In the surface charge characterization by pH_PCZ sorption of dyes, it was found that negative charges are predominant. The pH_PCZ for SB-NP and MSB-NP was 5.95 and 5.59, respectively, and the chosen Cu(II) adsorption pH was 6.2 ± 0.1. The adsorption equilibrium was reached between 10 and 60 min of contact time. The maximum experimental sorption capacity (SC_exp) was 2.53 ± 0.09 (SB-NP) and 2.61 ± 0.01 mg/g (MSB-NP). The isotherm models applied to the experimental data were Langmuir, Freundlich, Sips, Temkin, and Dubinin-Radushkevich, and Temkin best described the adsorption phenomena for Cu(II) by SB-NP (r² = 0.9976 and χ² = 3.965) and MSB-NP (r² = 0.9990 and χ² = 1.816). Reuse cycles of the nanocomposites were also performed employing ten cycles of sorption using 50 mg/L Cu(II) solutions, after which the materials showed SC_exp = 7.47 ± 0.04 mg/g (SB-NP) and 7.82 ± 0.04 mg/g (MSB-NP). Therefore, the investigated materials exhibited promising results to be used as biosorbents in the remediation of effluents contaminated with toxic metal ions, such as copper.

Equilibrium and Kinetic Study of Anionic and Cationic Pollutants Remediation by Limestone-Chitosan-Alginate Nanocomposite from Aqueous Solution

In this work, low-cost and readily available limestone was converted into nanolimestone chitosan and mixed with alginate powder and precipitate to form a triple nanocomposite, namely limestone—chitosan–alginate (NLS/Cs/Alg.), which was used as an adsorbent for the removal of brilliant green (BG) and Congo red (CR) dyes in aqueous solutions. The adsorption studies were conducted under varying parameters, including contact time, temperature, concentration, and pH. The NLS/Cs/Alg. was characterized by SEM, FTIR, BET, and TEM techniques. The SEM images revealed that the NLS/Cs/Alg. surface structure had interconnected pores, which could easily trap the pollutants. The BET analysis established the surface area to be 20.45 m²/g. The recorded maximum experimental adsorption capacities were 2250 and 2020 mg/g for CR and BG, respectively. The adsorption processes had a good fit to the kinetic pseudo second order, which suggests that the removal mechanism was controlled by physical adsorption. The CR and BG equilibrium data had a good fit for the Freundlich isotherm, suggesting that adsorption processes occurred on the heterogeneous surface with a multilayer formation on the NLS/Cs/Alg. at equilibrium. The enthalpy change (ΔH⁰) was 37.7 KJ mol⁻¹ for CR and 8.71 KJ mol⁻¹ for BG, while the entropy change (ΔS⁰) was 89.1 J K⁻¹ mol⁻¹ for CR and 79.1 J K⁻¹ mol⁻¹ BG, indicating that the adsorption process was endothermic and spontaneous in nature.

Highly efficient adsorption and immobilization of U(VI) from aqueous solution by alkalized MXene-supported nanoscale zero-valent iron

A novel composite of zero-valent iron nanoparticles supported on alkalized Ti₃C₂T_x nanoflakes (nZVI/Alk-Ti₃C₂T_x) was constructed by an in-situ growth method for simultaneous adsorption and reduction U(VI) from aqueous solution in anoxic conditions. The effect of various factors such as adsorbent dose, pH, ionic strength, contact time, initial U(VI) concentration and environmental media were comprehensively investigated by batch experiments. Benefiting from the good dispersion uniformity of nZVI on MXene substrates, nZVI/Alk-Ti₃C₂T_x exhibited rapid removal kinetics, excellent selectivity, 100% removal efficiency and up to 1315 mg g^-1 uptake capacity for U(VI) capture. In the presence of mimic groundwater, 1.0 mM NaHCO₃ and 10 mg L^-1 humic acid, the removal percentages of U(VI) by the composites could reach 95.1%, 88.9% and 69.5%, respectively. The reaction mechanism between U(VI) and nZVI/Alk-Ti₃C₂T_x has been clarified based on FTIR, XANES, XPS and XRD analysis. Depending on the consumption of reactive nZVI in the composites and the solution pH, the elimination of U(VI) could be realized by different pathways including reductive immobilization in the form of UO₂, inner-sphere surface complexation and hydrolysis precipitation. The present study illustrates that the nZVI/Alk-Ti₃C₂T_x composite may be an efficient scavenger for radioactive wastewater purification in environmental remediation.

Adsorption of Anionic Dyes Using a Poly(styrene-block-4-vinylpyridine) Block Copolymer Organogel

An organogel was prepared by chemically cross-linking a poly(styrene-block-4-vinylpyridine) diblock copolymer using dibromododecane in dimethylformamide. Analysis of the prominent structure peak in small-angle X-ray scattering along with the results of light scattering and rheological profile suggests the bridging of the spherical micelles to one another to form an interconnected network after gelation. The use of this organogel as a selective adsorbent for removing anionic dyes from individual aqueous dye solutions and in a mixture of cationic and anionic dye solutions has shown more than 90% removal of the anionic dyes within 2 h. The regeneration and reusability studies showed that even after 20 cycles, the adsorption property of the organogel holds extremely well still beyond 90%. These results are indicative of the potential use of poly(styrene-block-4-vinylpyridine) organogel for the anionic ions removal in wastewater treatment.

Effect of aspect ratio on the chirality of gold nanorods prepared through conventional seed-mediated growth method

In this work, three kinds of gold nanorods (AuNRs) with different aspect ratios were synthesized through conventional seed-mediated growth method, and the chirality of these AuNRs were characterized by circular dichroism (CD) spectroscopy. The results showed that the AuNRs with bigger aspect ratio had larger chirality. The AuNRs with different aspect ratios were applied to distinguish the enantiomers of 19 kinds of α-amino acids. It was found that AuNRs with bigger aspect ratio exhibited the stronger chiral recognition ability. As a proof-of-principle, the AuNRs with the aspect ratio of 4.8 were used to quantitatively recognize enantiomers of valine. Furthermore, the microcalorimetry was applied to study the interaction of AuNRs with amino acid enantiomers. This work provides one method to improve the chiral recognition ability of AuNRs by optimizing the aspect ratio of AuNRs, and helps people better understand the intrinsic chirality of nanostructures.

Adsorptive removal of gallic acid from aqueous solution onto magnetic ion exchange resin

Finding an appropriate adsorbent with high adsorption capacity, quick adsorption kinetics and easy regeneration was crucial to the removal of gallic acid (GA) from water and wastewater. Our aims were to investigate whether a magnetic ion exchange (MIEX) resin had the three merits mentioned above, and investigate the feasibility of GA adsorption on MIEX resin, and the adsorption kinetics, equilibrium, thermodynamics, regeneration and mechanism using batch tests. The uptake of GA increased with increasing GA concentration. The GA concentration influenced the time needed to reach equilibrium, but the adsorption could be completed within 120 min. Elevating temperature facilitated the GA removal. The removal percent remained above 95.0% at pH 5.0-11.0. Carbonate and bicarbonate promoted the GA removal; conversely chloride, sulfate and nitrate restrained the GA removal significantly. The adsorption kinetics could be fitted well with the pseudo second-order model, and the film diffusion governed the whole adsorption rate. The equilibrium data followed the Redlich-Peterson isotherm model. The adsorption was a spontaneous, endothermic and entropy driven process. The ion exchange dominated the removal mechanism. The spent MIEX resin was well regenerated by sodium chloride. Therefore, MIEX resin is a potential adsorbent for removing GA quickly and efficiently from water and wastewater.

Selective removal of anionic dyes with exceptionally high adsorption capacity and removal of dichromate (Cr2O72-) anion using Ni-Co-S/CTAB nanocomposites and its adsorption mechanism

An adsorbent Ni-Co-S/CTAB nanocomposites have been synthesized at low temperature in aqueous medium using nickel acetate, cobalt acetate, thioacetamide and hexadecyltrimethyl ammonium bromide (CTAB) as reagents. The nanocomposites exhibited exceptionally high adsorption capacity towards anionic adsorbates with high selectivity. The maximum adsorption capacity of nanocomposites were 1995.02 mg g^-1 for Congo red (CR), 2223.15 mg g^-1 for Methyl orange (MO) anionic dyes and 790.69 mg g^-1 for Cr₂O₇^2- metal anion. They exhibit negligible adsorption ability towards cationic dyes 2.33 mg g^-1 for MB and 42.05 mg g^-1 for RhB. The nanocomposite is able to adsorb anionic dyes from a binary mixture of cationic and anionic dyes with high separation factor. It also shows good results with synthetic effluents. The removal of adsorbates followed modified Zhu and Gu isotherm model. FTIR and Zeta-potential measurement confirmed that electrostatic interactions are predominating factor for the adsorption of anionic adsorbates followed by hydrophobic interactions between adsorbates. Moreover, ethanol is used to regenerate the adsorbent and reused up to five times with good adsorption capacities. Thus, the nanocomposite can be used as an efficient adsorbent for the removal and seperation of anionic adsorbates from binary mixtures as well as synthetic effluents.

Acid Red 66 Dye Removal from Aqueous Solution by Fe/C-based Composites: Adsorption, Kinetics and Thermodynamic Studies

The presence of synthetic dyes in water causes serious environmental issues owing to the low water quality, toxicity to environment and human carcinogenic effects. Adsorption has emerged as simple and environmental benign processes for wastewater treatment. This work reports the use of porous Fe-based composites as adsorbents for Acid Red 66 dye removal in an aqueous solution. The porous FeC and Fe/FeC solids were prepared by hydrothermal methods using iron sulfates and sucrose as precursors. The physicochemical properties of the solids were evaluated through X-ray diffraction (XRD), Scanning electron microscopy coupled with Energy dispersive spectroscopy (SEM-EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared s (FTIR), Raman and Mössbauer spectroscopies, nitrogen adsorption–desorption isotherms, Electron Paramagnetic Resonance (EPR) and magnetic saturation techniques. Results indicated that the Fe species holds magnetic properties and formed well dispersed Fe₃O₄ nanoparticles on a carbon layer in FeC nanocomposite. Adding iron to the previous solid resulted in the formation of γ-Fe₂O₃ coating on the FeC type structure as in Fe/FeC composite. The highest dye adsorption capacity was 15.5 mg·g⁻¹ for FeC nanocomposite at 25 °C with the isotherms fitting well with the Langmuir model. The removal efficiency of 98.4% was obtained with a pristine Fe sample under similar experimental conditions.

One-step synthesis of Cu(II) metal-organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(II)-based metal-organic gel (Cu-MOG) with a nanoporous 3D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.

Feasibility of nanoscale zero-valent iron (nZVI) for enhanced biological treatment of organic dyes

Biodegradation of recalcitrant organic contaminants such as organic dyes is a fundamental challenge in wastewater treatment. We report herein the integration of nanoscale zero-valent iron (nZVI) with membrane bioreactors (nZVI-bio system) to achieve enhanced degradation of Congo red (CR) in wastewater. nZVI pretreatment converts the large and bio-recalcitrant CR molecules into smaller and more biodegradable organic compounds in continuous flow stirred tank reactors (CFSTR). A nZVI-bio system was experimented continuously for 52 d with a color removal efficiency of 99% and a reduction of chemical oxygen demand (COD) from 167 mg L^-1 to less than 70 mg L^-1. However, a conventional biotreatment system treating identical wastewater achieved color removal efficiency of just 30-70% and the COD reduction to 116 mg L^-1. This suggests that integrated nZVI-bio system has potential for the treatment of recalcitrant organic dyes. On-line measurements of pH and redox potential in the CSFTR can be conveniently used to monitor and regulate treatment performance.

In-situ prepared ZnO-ZnFe2O4 with 1-D nanofiber network structure: An effective adsorbent for toxic dye effluent treatment

Current research on ZnFe₂O₄-based adsorbents rely mainly on its surface charge to remove Congo red (CR). However, the weak charge of ZnFe₂O₄ due its normal spinel structure makes this approach inefficient as evident from its low activity. Considering the potential of ZnFe₂O₄ as a low cost nontoxic adsorbent, it is important to improve its activity. Herein, we present an in-situ prepared 1-D ZnO-ZnFe₂O₄ with a heterojunction which adsorbs CR chemically instead of the generic physisorption. While its 1-D structure allows very low adsorbent loading to be employed. Together, these two unique properties make 1-D ZnO-ZnFe₂O₄ ˜3.3x more effective at treating CR effluent than reported ZnFe₂O₄-based adsorbents. The chemisorption reaction involves chelating/bridging bidentate bonding between sulfonic groups on CR and ZnO-ZnFe₂O₄ heterojunction. Its potency is regulated by the ZnO content of the composite which suggest a synergistic effect between the metal oxides phases. Interestingly, spent 1-D ZnO-ZnFe₂O₄ can be regenerated in NaOH solution and retains ˜75% of its adsorption capacity even after repeated use. These findings provide key insights into how interfacial interactions in mixed metal oxide composites and their morphology affect dye adsorption. This information may be useful to develop high performing adsorbents from metal oxides in general.

Fabrication of Atom Probe Tomography Specimens from Nanoparticles Using a Fusible Bi-In-Sn Alloy as an Embedding Medium

We propose a new method for preparing atom probe tomography specimens from nanoparticles using a fusible bismuth-indium-tin alloy as an embedding medium. Iron nanoparticles synthesized by the sodium borohydride reduction method were chosen as a model system. The as-synthesized iron nanoparticles were embedded within the fusible alloy using focused ion beam milling and ion-milled to needle-shaped atom probe specimens under cryogenic conditions. An atom probe analysis revealed boron atoms in a detected iron nanoparticle, indicating that boron from the sodium borohydride reductant was incorporated into the nanoparticle during its synthesis.

New multifunctional 3D porous metal–organic framework with selective gas adsorption, efficient chemical fixation of CO2 and dye adsorption

A new porous Mn(ii)-based MOF was obtained. The studies indicated it exhibits an effective storage capacity for CO₂, highly efficient catalyst behavior for epoxides with different substituents and rapid adsorption behavior of different dyes.

Three hierarchical porous magnesium borate microspheres: a serial preparation strategy, growth mechanism and excellent adsorption behavior for Congo red

The 3D hierarchical porous 7MgO·2B₂O₃·7H₂O (MBH) microspheres were prepared by a phase transformation of chloropinnoite firstly, and anhydrous α-3MgO·B₂O₃ (MBA) microspheres were obtained by thermal conversion of 7MgO·2B₂O₃·7H₂O, and then β-3MgO·B₂O₃ (MBB) microspheres were obtained by phase conversion of α-3MgO·B₂O₃. All samples were characterized by XRD, FT-IR, TG and SEM. The microsphere nanostructures with a hierarchical porous structure were assembled by nanosheets with a thickness of 20–30 nm, and the growth mechanisms were also proposed. By using N₂ adsorption–desorption, the specific surface areas were measured as 103.62 m² g⁻¹ for MBH and 46.10 m² g⁻¹ for MBA. They exhibited excellent selective adsorption performance for Congo red (CR) with maximum adsorption capacities of 202.84 and 170.07 mg g⁻¹ respectively, and the corresponding adsorption mechanisms were also investigated. The adsorption processes were well fitted with the pseudo-second-order rate equation and Langmuir adsorption model. In addition, the corresponding adsorption thermodynamic parameters were also calculated. It is necessary to highlight that the hierarchical porous microspheres could be considered as promising candidates for removal of CR dye pollutants.

Three 3D hierarchical porous 7MgO·2B₂O₃·7H₂O and 3MgO·B₂O₃ microspheres assembled by nanosheets have been prepared by a serial preparation strategy. They exhibited excellent selective adsorption performance for Congo red with high adsorption capacities.

Superb adsorption capacity of biochar derived from leather shavings for Congo red

Research on biochar for removal of dyes has been a hot topic because of its excellent eco-friendly and economical properties. In this study, leather shavings biochar (LSB) with high adsorption capacity was prepared and tested with Congo red as a model dye for adsorption. The research results show that the as-prepared biochar exhibits a porous structure, with a high specific surface area (2365 m2 g-1), and it would be beneficial for removing Congo red from effluents. More interestingly, adsorption capacity of LSB for Congo red was enhanced by chromium compounds on the surface of biochar through chelation and electrostatic interactions. Chelation occured between the chromium compounds and amino groups of Congo red. Adsorption data for Congo red on the biochar were successfully described by Langmuir isotherm and the pseudo-second order kinetics model. Langmuir maximum adsorption capacity of LSB at 30 °C reached 1916 mg g-1, which is much higher than that of conventional activated carbon (AC). Recycling experiment shows that LSB has a potential market for removing Congo red.

Template-free synthesis of nanoparticle-built MgO and Zn-doped MgO hollow microspheres with superior performance for Congo red adsorption from water

A template-free route was developed to synthesize MgO and Zn-doped MgO hollow microspheres with ultrahigh adsorption performances and excellent reusability.

Hierarchically porous SiO2/C hollow microspheres: a highly efficient adsorbent for Congo Red removal

Hierarchically porous SiO₂/C hollow microspheres (HPSCHMs) were synthesized by a hydrothermal and NaOH-etching combined route. The adsorption performance of the prepared HPSCHMs was investigated to remove Congo Red (CR) in aqueous solution. The results show that the synthesized composite possesses a hollow microspherical structure with hierarchical pores and a diameter of about 100–200 nm, and its surface area is up to 1154 m² g⁻¹. This material exhibits a remarkable adsorption performance for CR in solution, and its maximum adsorption amount for CR can reach up to 2512 mg g⁻¹. It shows faster adsorption and much higher adsorption capacity than the commercial AC and γ-Al₂O₃ samples under the same conditions. The studies of the kinetics and thermodynamics indicate that the adsorption of CR on the PHSCHM sample obeys the pseudo-second order model well and belongs to physisorption. The adsorption activation energy is about 7.72 kJ mol⁻¹. In view of the hierarchically meso–macroporous structure, large surface area and pore volume, the HPSCHM material could be a promising adsorbent for removal of pollutants, and it could also be used as a catalyst support.

Hierarchically porous SiO₂/C hollow microspheres (HPSCHMs) were synthesized. Its surface area is up to 1154 m² g^–1. Hierarchically porous structure facilitates diffusion of adsorbate. Its maximum adsorption amount for Congo Red is up to 2512 mg g^–1.