Enhancing ozone catalytic decomposition through acid treatment of α-MnO2 for improved activity and humidity resistance

Post-etching method using dilute acid solutions is an effective technology to modulate the surface compositions of metal-oxide catalysts. Here the α-MnO2 catalyst treated with 0.1 mol/L nitric acid exhibits higher ozone decomposition activity at high relative humidity than the counterpart treated with acetic acid. Besides the increases in surface area and lattice dislocation, the improved activity can be due to relatively higher Mn valence on the surface and newly-formed Brønsted acid sites adjacent to oxygen vacancies. The remnant nitro species deposited on the catalyst by nitric acid treatment is ideal hydrophobic groups at ambient conditions. The decomposition route is also proposed based on the DRIFTS and DFT calculations: ozone is facile to adsorb on the oxygen vacancy, and the protonic H of Brønsted acid sites bonds to the terminal oxygen of ozone to accelerate its cleavage to O2, reducing the reaction energy barrier of O2 desorption.

Synthesis Ag-Hollandite by mild route for highly efficient ozone decomposition

Catalytic ozone (O3) decomposition is a promising technology for curbing indoor O3 pollution, whereas its application is limited by the stability and moisture resistance of heterogeneous catalysts. Ag-Hollandite is a capable solution, but its facile synthesis still lacks systematic investigation. In this study, Ag-Hollandite catalysts were prepared using AgMnO4 as the precursor by reflux (AMO-Re), hydrothermal (AMO-HT), and homogeneous (AMO-HR) methods, respectively. The as-prepared samples showed excellent stability under moisture conditions, with the optimal one maintaining an O3 conversion rate of 99.19 % after 100 h. In the characterization results, Ramsdellite (R-MnO2) was identified as an intermediate species in the synthesis. AMO-HR exhibits higher activity due to enhanced active site exposure and weakened adsorption towards *OO species, while reduced surface hydroxyl content was a crucial factor for moisture resistance. This study aims to contribute insights for preparing catalysts by a facile method.

Cation-Induced Self-Assembly of α-MnO2 Nanowires into High-Purity Self-Standing Three-Dimensional Network Aerogels for Catalytic Decomposition of Carcinogenic Formaldehyde at Ambient Temperature

Formaldehyde (HCHO), a ubiquitous gaseous pollutant in indoor environments, threatens human health under long-term exposure, necessitating its effective elimination. Due to its advantages in enhancing mass transfer and effectively exposing active sites, aerogels with a three-dimensional (3D) interconnected network structure are expected to achieve efficient and stable decomposition of HCHO at ambient temperature. However, how to realize the self-assembly of transition metal oxides to construct high-purity 3D network aerogels is still a huge challenge. Herein, the cation-induced self-assembly strategy was developed to construct high-purity self-standing 3D network manganese dioxide aerogels. The interaction between cations and the surface groups of nanowires is crucial for successful self-assembly, which leads to the cross-winding of nanowires with each other, forming a 3D-structured network. The K+-induced 3D-MnO2 exhibited excellent catalytic performance for HCHO, which could continuously and steadily decompose HCHO into CO2 and H2O at ambient temperature. Thanks to the 3D interconnected network structure, on the one hand, it provides a large specific surface area and porosity, reducing mass transfer resistance and promoting the adsorption of HCHO and O2 molecules. On the other hand, it is more important to fully expose the active sites, which can generate more surface active oxygen species and achieve effective recycling and regeneration. Importantly, 3D-MnO2 has a strong ability to capture and activate water molecules in the atmosphere, which could be further involved in the replenishment of the consumed hydroxyl groups. This study proposes a strategy for self-assembly of transition metal oxides through cation-induction, which provides a new catalyst design approach for the room temperature decomposition of VOCs.

Efficient Ozone Elimination Over MnO2 via Double Moisture-Resistance Protection of Active Carbon and CeO2

The widespread ozone (O3) pollution is extremely hazardous to human health and ecosystems. Catalytic decomposition into O2 is the most promising method to eliminate ambient O3, while the fast deactivation of catalysts under humid conditions remains the primary challenge for their application. Herein, we elaborately developed a splendidly active and stable Mn-based catalyst with double hydrophobic protection of active carbon (AC) and CeO2 (CeMn@AC), which possessed abundant interfacial oxygen vacancies and excellent desorption of peroxide intermediates (O22-). Under extremely humid (RH = 90%) conditions and a high space velocity of 1200 L h-1 g-1, the optimized CeMn@AC achieved nearly 100% O3 conversion (140 h) at 5 ppm, showing unprecedented catalytic activity and moisture resistance toward O3 decomposition. In situ DRIFTS and theory calculations confirmed that the exceptional moisture resistance of CeMn@AC was ascribed to the double protection effect of AC and CeO2, which cooperatively prevented the competitive adsorption of H2O molecules and their accumulation on the active sites of MnO2. AC provided a hydrophobic reaction environment, and CeO2 further alleviated moisture deterioration of the MnO2 particles exposed on the catalyst surface via the moisture-resistant oxygen vacancies of MnO2-CeO2 crystal boundaries. This work offers a simple and efficient strategy for designing moisture-resistant materials and facilitates the practical application of the O3 decomposition catalysts in various environments.

Effect of Interlayer Anions on NiFe Layered Double Hydroxides for Catalytic Ozone Decomposition

NiFe layered double hydroxides (NiFe-LDH) exhibited an outstanding performance and promising application potential for removing ozone. However, the effect of interlayer anions on ozone removal remains ambiguous. Here, a series of NiFe-LDH with different interlayer anions (F-, Cl-, Br-, NO3-, CO32-, and SO42-) were prepared to investigate the effect of the interlayer anion on ozone removal for the first time. It was found that the interlayer anions are a key factor affecting the water resistance of the NiFe-LDH catalyst under moist conditions. NiFe-LDH-CO32- exhibited the best water resistance, which was much better than that of NiFe-LDH containing other interlayer anions. The in situ DIRFTS demonstrates that the carbonates in the interlayer of NiFe-LDH-CO32- will undergo coordination changes through the interaction with water molecules under moist conditions, exposing new metal sites. As a result, the newly exposed metal sites could activate water molecules into hydroxyl groups that act as active sites for catalyzing ozone decomposition. This work provides a new insight into the interlayer anions of LDH, which is important for the design and development of LDH catalysts with excellent ozone removal properties.

Enhanced water resistance mechanism in Ag-Hollandite for catalytic ozone decomposition

Catalytic ozone (O3) decomposition at ambient temperature is an efficient method to mitigate O3 pollution. However, practical application is hindered by the poor water resistance of catalysts. Herein, Ag-Hollandite (Ag-HMO) with varying Ag+ content was synthesized. Catalysts with more Ag+ exhibited improved efficiency and water-resistance, with the optimal one maintaining 98% O3 conversion at 70% relative humidity (RH) within 8 h. Physicochemical characterizations revealed that Ag+ had entered the tunnel of OMS-2, facilitating oxygen species removal. Notably, enhanced H2O desorption and the complete inhibition of chemisorbed water formation on Ag-HMO were the primary reasons for its high-efficiency O3 conversion across a wide humidity range. The underlying mechanism arises from the charge redistribution induced by the Ag-O interaction within the tunnel, which reduces acidity and modulates hydrophilicity. This study aims to contribute insights for designing catalysts with higher water-resistance.

Myriophyllum Biochar-Supported Mn/Mg Nano-Composites as Efficient Periodate Activators to Enhance Triphenyl Phosphate Removal from Wastewater

Transition metals and their oxide compounds exhibit excellent chemical reactivity; however, their easy agglomeration and high cost limit their catalysis applications. In this study, an interpolation structure of a Myriophyllum verticillatum L. biochar-supported Mn/Mg composite (Mn/Mg@MV) was prepared to degrade triphenyl phosphate (TPhP) from wastewater through the activating periodate (PI) process. Interestingly, the Mn/Mg@MV composite showed strong radical self-producing capacities. The Mn/Mg@MV system degraded 93.34% TPhP (pH 5, 10 μM) within 150 min. The experimental results confirmed that the predominant role of IO3· and the auxiliary ·OH jointly contributed to the TPhP degradation. In addition, the TPhP pollutants were degraded to various intermediates and subsequent Mg mineral phase mineralization via mechanisms like interfacial processes and radical oxidation. DFT theoretical calculations further indicated that the synergy between Mn and Mg induced the charge transfer of the carbon-based surface, leading to the formation of an ·OH radical-enriched surface and enhancing the multivariate interface process of ·OH, IO3, and Mn(VII) to TPhP degradation, resulting in the further formation of Mg PO4 mineralization.

Highly efficient removal of ozone by amorphous manganese oxides synthesized with a simple hydrothermal method

Amorphous manganese oxides (MnOx) were synthesized by facile hydrothermal reactions between potassium permanganate and manganese acetate. Synthesis parameters, including hydrothermal time and temperature and molar ratio of precursors, significantly affected the ozone removal performance and structure property of MnOx. Amorphous MnOx-1.5, which was prepared at the Mn2+/Mn7+ molar ratio of 1.5 under hydrothermal conditions of 120°C and 2 hr, showed the highest ozone removal rate of 93% after 480 min at the room temperature, RH (relative humidity) = 80% and WHSV (weight hourly space velocity) = 600 L/(g·hr). The morphology, composition and structure of catalysts were investigated with X-ray diffractometer (XRD), Raman spectra, N2 physisorption, field emission scanning electron microscope (FESEM), X-ray photoelectron spectroscopy (XPS), H2 temperature-programmed reduction (H2-TPR), O2 temperature-programmed desorption (O2-TPD) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS). It was confirmed that high catalytic activity of amorphous MnOx for ozone removal was mainly ascribed to its abundant oxygen vacancies, high oxygen mobility and large specific surface area.

Functional Ag-EDTA-modified MnO2 nanocoral reef for rapid removal of hazardous copper from wastewater

A novel MnO2@EDTA-Ag nanocoral reef was constructed via a simplified redox reaction followed by EDTA and Ag nanoparticles impregnation to capture hazardous copper (II) from wastewater. A comprehensive characterization of the synthesized materials was conducted. The morphology of MnO2@EDTA-Ag in the form of a nanocoral reef was constructed of two-dimensional nanoplatelets and nanorod-like nanostructures. The optimal adsorption conditions proposed by the Plackett-Burman design (PBD) that would provide a removal % of 99.95 were pH 5.5, a contact time of 32.0 min, a Cu(II) concentration of 11.2 mg L-1, an adsorbent dose of 0.05 g, and a temperature of 40.3 °C. The loading of Ag nanoparticles onto MnO2@EDTA improved the adsorption capability of MnO2@EDTA-Ag. Additionally, the recyclability of MnO2@EDTA-Ag nanocoral reef was maintained at 80% after three adsorption-desorption cycles, and there was no significant change in the XRD analysis before and after the recycling process, implying its stability. It was found that nanocoral reef-assisted EDTA formed a chelation/complexation reaction between COO- groups and C-N bonds of EDTA with Cu(II) ions. In addition, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis proved the synergistic effect of the electrostatic interaction and chelation/complexation was responsible for the removal mechanism of Cu(II). Also, the results demonstrated no significant variation in MnO2@EDTA-Ag removal efficiency for all the tested real water samples, revealing its efficacy in wastewater treatment. Therefore, the current study suggests that MnO2@EDTA-Ag has substantial potential to be used as a feasible adsorbent for probable hazardous metals remediation.

Low-temperature catalytic oxidation of PCDD/Fs over MnCeCoOx/PPS catalytic filter

Catalytic destruction of nitrogen oxides (NOx) combined with dust removal technique has attracted much attention, yet the application in the solid waste incineration air pollution control process is still lacking due to the complex flue gas atmosphere. In this work, the Mn-Ce-Co-Ox catalyst-coated polyphenylene sulfide (PPS) filter fiber with efficient dust removal and low-temperature polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) destruction has been prepared with a redox-precipitation method. The catalyst was uniformly grown around the PPS fiber with appropriate catalyst loading. The effects of several key operating parameters (e.g., reaction temperature, catalyst loading amount, and filtration velocity) on the catalytic efficiency were comprehensively investigated. The results show that the Mn-Ce-Co-Ox/PPS has a decomposition yield of 78.0% in PCDD/Fs and 96% in nitric oxide (NO) conversion at 200 °C. The poisoned catalytic filter exhibits a removal efficiency of 88.6% for PCDD/Fs. In addition, the catalytic filter can completely reject particles smaller than 1.0 μm with a low filtration resistance. Therefore, this efficient and energy-conserving catalytic filter shows promising applications in flue gas pollution treatments.

Target-prepared sludge biochar-derived synergistic Mn and N/O induces high-performance periodate activation for reactive iodine radicals generation towards ofloxacin degradation

Converting waste activated sludge into catalysts for the removal of antibiotics in water fulfils the dual purpose of waste-to-resource and hazardous pollution elimination. In this study, sludge-derived biochar (SDB) for efficient periodate (PI) activation was first prepared via one-step pyrolysis of potassium permanganate-polyhexamethylenebiguanide conditioned sludge without additional modification. The SDB (750 °C)-PI system degraded 100% ofloxacin (OFL, 41.5 μM) within 6 min and was almost undisturbed by inorganic ions or humic acids. The experimental results confirmed that the predominant role of reactive iodine species (RIS) and the auxiliary involvement of singlet oxygen (1O2) jointly contributed to the OFL degradation. Theoretical calculations further indicated that the synergy between Mn and N/O induced local charge redistribution and improved electron transfer capability of SDB, leading to the formation of electron-rich Mn sites and enhanced Mn(II)↔Mn(III)↔Mn(IV) redox to promote PI activation. More importantly, the enhanced adsorption and charge transfer of PI on the Mn site of the Mn-N/O-C structures induced the I-O bond stretching and the rapid generation of RIS. This study offered a cost-effective strategy for developing SDB-based catalysts, further advancing the comprehension of sludge management and the intricate mechanisms underlying RIS formation in PI-advanced oxidation processes.

Cerium-modified amorphous manganese oxides for efficient catalytic removal of ozone

Manganese-based catalysts were widely developed for catalytic removal of ozone, and the low stability and water inactivation are major challenges. To improve removal performance of ozone, three methods were applied to modify amorphous manganese oxides, including acidification, calcination and Ce modification. The physiochemical properties of prepared samples were characterized, and the catalytic activity for ozone removal was evaluated. All modification methods can promote the removal of ozone by amorphous manganese oxides, and Ce modification showed the most significant enhancement. It was confirmed that the introduction of Ce markedly changed the amount and property of oxygen vacancies in amorphous manganese oxides. Superior catalytic activity of Ce-MnO_x can be ascribed to its more content and enhanced formation ability of oxygen vacancies, larger specific surface area and higher oxygen mobility. Furthermore, the durability tests under high relative humidity (80%) determined that Ce-MnO_x showed excellent stability and water resistance. These demonstrate the promising potential of amorphously Ce-modified manganese oxides for catalytic removal of ozone.

Cu Species-Modified OMS-2 Materials for Enhancing Ozone Catalytic Decomposition under Humid Conditions

Manganese oxide octahedral molecular sieves (OMS-2) exhibit an excellent performance in ozone catalytic decomposition in dry atmosphere conditions, which however is severely limited by deactivation in humid conditions. Herein, it was found that the OMS-2 materials modified with Cu species could obviously improve both the ozone decomposition activity and water resistance. Based on the characterization results, it was found that these CuO_x/OMS-2 catalysts exhibited dispersed CuO_x nanosheets attached and located at the external surface accompanied with ionic Cu species entering the MnO₆ octahedral framework of OMS-2. In addition, it was demonstrated that the main reason for the promotion of ozone catalytic decomposition could be ascribed to the combined effect of different Cu species in these catalysts. On the one hand, ionic Cu entered the MnO₆ octahedral framework of OMS-2 near the catalyst surface and substituted ionic Mn species, resulting in an enhanced mobility of surface oxygen species and formation of more oxygen vacancies, which act as the active sites for ozone decomposition. On the other hand, the CuO_x nanosheets could serve as non-oxygen vacancy sites for H₂O adsorption, which could alleviate the catalyst deactivation to some extent caused by the occupancy of H₂O on surface oxygen vacancies. Finally, different reaction pathways for ozone catalytic decomposition over OMS-2 and CuO_x/OMS-2 under humid conditions were proposed. The findings in this work may shed new light on the design of highly efficient catalysts for ozone decomposition with improved water resistance.

Coordination-Controlled Catalytic Activity of Cobalt Oxides for Ozone Decomposition

Nowadays, it is still elusive and challenging to discover the active sites of cobalt (Co) cations in different coordination structures, though Co-based oxides show their great potency in catalytic ozone elimination for air cleaning. Herein, different Co-based oxides are controllably synthesized including hexagonal wurtzite CoO-W with Co²⁺ in tetrahedral coordination (Co_Td²⁺) and CoAl spinel with dominant Co_Td²⁺, cubic rock salt CoO-R with Co²⁺ in octahedral coordination (Co_Oh²⁺), MgCo spinel with dominant Co³⁺ in octahedral coordination (Co_Oh³⁺), and Co₃O₄ with mixed Co_Td²⁺ and Co_Oh³⁺. The valences are proved by X-ray photoelectron spectroscopy, and the coordinations are verified by X-ray absorption fine structure analysis. The ozone decomposition performances are Co_Oh³⁺ ∼ Co_Oh²⁺ ≫ Co_Td²⁺, and Co_Oh³⁺ and Co_Oh²⁺ show a lower apparent activation energy of ∼42-44 kJ/mol than Co_Td²⁺ (∼55 kJ/mol). In specific, MgCo shows the highest decomposition efficiency of 95% toward 100 ppm ozone at a high space velocity of 1,200,000 mL/gh, which still retains at 80% after a long-term running of 36 h at room temperature. The high activity is explained by the d-orbital splitting in the octahedral coordination, favoring the electron transfer in ozone decomposition reactions, which is also verified by the simulation. These results show the promising prospect of the coordination tuning of Co-based oxides for highly active ozone decomposition catalysts.

Oxidative Cleavage and Ammoxidation of Unsaturated Hydrocarbons via Heterogeneous Auto-Tandem Catalysis

The oxidative cleavage and functionalization of unsaturated C-C bonds are important processes for synthesis of carbonyl compounds from hydrocarbon feedstocks, yet there has been no report of direct amidation of unsaturated hydrocarbons via an oxidative cleavage of unsaturated C-C bonds with molecular oxygen as an environmentally benign oxidant. Herein, for the first time, we describe a manganese oxide-catalyzed auto-tandem catalysis strategy that enables direct synthesis of amides from unsaturated hydrocarbons by coupling oxidative cleavage with amidation. With oxygen as an oxidant and ammonia as a nitrogen source, a wide range of structurally diverse mono- and multisubstituted activated and unactivated alkenes or alkynes can smoothly undergo unsaturated C-C bond cleavage to deliver one- or multiple-carbon shorter amides. Moreover, a slight modification of the reaction conditions also allows for the direct synthesis of sterically hindered nitriles from alkenes or alkynes. This protocol features excellent functional group tolerance, a broad substrate scope, flexible late-stage functionalization, facile scalability, and a cost-effective and recyclable catalyst. Detailed characterizations reveal that the high activity and selectivity of the manganese oxides are attributed to the large specific surface area, abundant oxygen vacancies, better reducibility, and moderate acid sites. Mechanistic studies and density functional theory calculations indicate that the reaction proceeds through divergent pathways depending on the structure of substrates.

Electron transfer enhancing the Mn(II)/Mn(III) cycle in MnO/CN towards catalytic ozonation of atrazine via a synergistic effect between MnO and CN

In this study, manganese oxide (MnO) dispersed on CN (Mn-nCN) was fabricated as a catalyst in heterogeneous catalytic ozonation (HCO), achieving excellent catalytic performance on refractory organic pollutant degradation via the synergistic effects between MnO and CN. The study demonstrated that the C-N-Mn and C-O-Mn bonds constructed in the catalyst linking MnO and CN created the synergistic effects which could overcome typical problems, such as metal leaching etc. The C-N-Mn and C-O-Mn bonds could promote electron transfer from cation-π reactions to form electron-rich Mn(II) sites and electron-poor CN sites. The electron-rich Mn(II) sites as active sites supplied electrons to ozone which then further evolved into reactive oxygen species (ROS). The electron-poor CN sites captured electrons from the pollutant intermediate radicals to electron-rich Mn(II) sites via cation-π reactions with the help of C-N-Mn and C-O-Mn bonds, which promote the redox reactions of Mn. The surface hydroxyl groups also participated in ozone decomposition and ROS production. Additionally, ^•OH was the dominant ROS of the Mn-nCN HCO processes. This study presents the excellent HCO performance of Mn-nCN, as well as provides views on the electron transfer route between the catalyst, pollutant and ozone, which is crucial for the design of the catalyst.

Different degradation mechanisms of low-concentration ozone for MIL-100(Fe) and MIL-100(Mn) over wide humidity fluctuation

The synergistic control of ozone and fine particulate matter is a research hotspot in the current environmental fields. Among the ozone removal, wide humidity fluctuation and low concentration dynamic adsorption are two thorny problems. In this work, MIL-100(Fe) and MIL-100(Mn), synthesized by hydrothermal and solvothermal methods respectively, were selected to investigate the degradation of flowing ozone pollutants. The samples showed different ozone degradation mechanisms, namely photocatalytic degradation and normal temperature degradation. Notably, MIL-100(Fe) exhibited more outstanding photocatalytic activity than MIL-100(Mn), while the normal temperature catalytic efficiency of MIL-100(Mn) was much superior to MIL-100(Fe). For different humidity conditions, MIL-100(Fe) has the optimal photocatalytic performance at 10% humidity, which is 38%, while MIL-100(Mn) has basically no change in normal temperature catalytic degradation efficiency at different humidity levels of 10-90%. Furthermore, the degradation mechanism was proposed by in-situ DRIFTS and ESR, which was significantly correlated with oxygen vacancy and photogenerated electron efficiency. By the aid of Temperature Programmed Desorption (TPD), a large quantity of Lewis acid sites was detected in MIL-100(Mn), which was the critical factor that the selected materials could maintain excellent normal temperature degradation performance under high humidity. This work will expand the practical application of ozone removal and improve the degradation efficiency.

Highly stable and efficient calcined γ-Al2O3 catalysts loaded with MnOx-CeOx for the ozonation of oxytetracycline

Catalytic ozonation with supported metal oxides is a promising strategy for addressing refractory pollutants in wastewater. In this study, γ-Al2O3 supported MnOx-CeOx catalysts (MC1, MC2, and MC3) obtained at different calcination temperatures (400 °C, 550 °C, and 700 °C) were applied as effective catalysts for ozonation and explored the feasibility of the treatment of oxytetracycline (OTC) wastewater. Comparatively, the MC2 possessed the highest molar ratios of Mn3+/Mn4+ (1.60) and Ce3+/Ce4+ (0.96), the largest surface area (273.8 m2 g-1) with a petal-shaped structure, and most abundant surface hydroxyls (3.78 mmol g-1). These physicochemical characteristics benefited the surface reaction and resulted in the acceleration of ozone decomposition, electron transfer, and •OH generation, thereby improving the catalyst's adsorption ability and catalytic activity. The combination with MC2 increased the OTC and COD removal of the ozonation process from 59.1% and 29.0% to 94.7% and 83.3% in 25 min, respectively. By employing electron paramagnetic resonance (EPR) and radical quenching experiments, it was verified that •OH species generation promoted the mineralization of OTC. The possible degradation pathways of OTC were investigated through mass spectrometry, and the route consisted of dehydration, deamination, and demethylation. Moreover, during a 12-day continuous experiment, MC2 catalyst exhibited excellent reusability and catalytic stability, with COD removal efficiencies above 80%.

Exploring an electric-aid ozone decomposition mode to enhance water resistance over manganese oxide monolith catalyst under high humidity

In this work, a facile, green, and effective reaction mode of electric-aid ozone decomposition (EAOD) was developed over a manganese-based monolith catalyst for eliminating ozone under high humidity. The catalyst was prepared by directly growing α-MnO₂ nanorods on Al honeycomb substrate (MnO₂/Al) via a simple hydrothermal process, and the EAOD mode was performed just by connecting the MnO₂/Al monolith catalyst with a DC power supply during ozone decomposition reaction. In the EAOD mode reaction, the MnO₂/Al catalyst exhibited a stable ozone conversion efficiency of over 82 % and excellent stability over 720 min under a relative humidity of 90%, well beyond the performance of catalyst in the conventional ozone decomposition reaction without the help of electric aid. Here, the water evaporation by the external electric field generated from the EAOD mode hinders the competitive adsorption of water vapor on the active sites of MnO₂/Al catalyst, consequently enhances its water resistance. Moreover, increasing input electric current of the DC power supply could further improve the catalytic activity and stability of the monolith catalyst for ozone decomposition in EAOD mode reaction.

Engineering Amorphous/Crystalline Structure of Manganese Oxide for Superior Oxygen Catalytic Performance in Rechargeable Zinc-Air Batteries

Although amorphous materials are popular in oxygen electrocatalysis, their performance requires further improvement to meet the need for rechargeable zinc-air batteries. In this work, an amorphous/crystalline layered manganese oxide (ACMO) was designed, and its unique amorphous/crystalline homogeneous structure activated its oxygen reduction activity with a positive half-wave potential of 0.81 V and oxygen evolution activity with a moderate overpotential of 407 mV at 10 mA cm^-2 . Moreover, the amorphous/crystalline structure endowed ACMO with excellent stability. While employed as the air-electrode material for rechargeable zinc-air batteries, ACMO overcame the poor cycling stability of manganese oxide and cycled stably for 1000 cycles (≈17 days) at 10 mA cm^-2 . Besides, it delivered a high power density of 159.7 mW cm^-2 and a narrow voltage gap of 0.66 V. This work gives an insight into designing oxide materials with amorphous/crystalline structure and feasible guidance for harmonizing electrochemical activity and stability.

In-situ utilization of membrane foulants (FeOx+MnOx) for the efficient membrane cleaning

Preoxidation-ultrafiltration process is an effective method for Fe²⁺ and Mn²⁺removal, in which Fe²⁺ (Mn²⁺) are firstly oxidized to FeO_x (MnO_x), then collected by the ultrafiltration membrane. However, the simultaneous presence of Fe²⁺, Mn²⁺, and organics in feed can cause severe membrane fouling, which inhibits the overall performance of this method prominently. In this study, a novel FeO_x+MnO_x+H₂O₂ membrane cleaning method is proposed based on the idea of turning in-situ generated membrane foulants, i.e., FeO_x+MnO_x, into the catalysts for membrane cleaning. The results demonstrate that the FeO_x+MnO_x+H₂O₂ system can achieve more than 95% membrane flux recovery and remove almost all irreversible membrane foulants within only 5 min and with only 0.5%wt% H₂O₂ solution. The outstanding performance of the system is mainly attributed to the catalytic decomposition of H₂O₂ to generate both highly reactive radicals, such as hydroxyl radicals (·OH), and abundant oxygen. In addition, when the membrane is loaded by only MnO_x, polyaluminium chloride (PAC) as the coagulator demonstrates prominent influence on the performance of membrane cleaning. However, PAC makes almost no contribution to membrane cleaning when the membrane is loaded by FeO_x. This is because coagulation induced by PAC exerts more prominent impact on the particle size distribution of MnO_x than that of FeO_x. In conclusion, the catalytic decomposition of H₂O₂ by in-situ generated FeO_x+MnO_x is a promising advanced oxidation process to achieve outstanding membrane cleaning performance under the condition of low H₂O₂ concentration and no extra dosage of catalysts. The novel membrane cleaning system exhibits high potential for the practical membrane treatment processes to treat water with high contents of Fe and Mn.

Mesoporous poorly crystalline α-Fe2O3 with abundant oxygen vacancies and acid sites for ozone decomposition

In this work, mesoporous poorly crystalline hematite (α-Fe₂O₃) was prepared using mesoporous silica (KIT-6) functionalized with 3-[(2-aminoethyl)amino]propyltrimethoxysilane as a hard template (SMPC-α-Fe₂O₃). The disordered atomic arrangement structure of SMPC-α-Fe₂O₃ promoted the formation of oxygen vacancies, which was confirmed using X-ray photoelectron spectroscopy (XPS), O₂-temperature-programmed desorption (TPD), H₂-temperature-programmed reduction (TPR), and in situ diffuse reflectance infrared Fourier transform (DRIFT) analyses. Density functional theory calculations (DFT) also proved that reducing the crystallinity of α-Fe₂O₃ decreased the formation energy of oxygen vacancies. TPD and in situ DRIFT analyses of NH₃ adsorption suggested that the surface acidity of SMPC-α-Fe₂O₃ was considerably higher than those of mesoporous poorly crystalline α-Fe₂O₃ (MPC-α-Fe₂O₃) and highly crystalline α-Fe₂O₃ (HC-α-Fe₂O₃). The oxygen vacancies and acid sites formed on α-Fe₂O₃ surface are beneficial for ozone (O₃) decomposition. Compared with MPC-α-Fe₂O₃ and HC-α-Fe₂O₃, SMPC-α-Fe₂O₃ exhibited a higher removal efficiency for 200-ppm O₃ at a space velocity of 720 L g^-1 h^-1 at 25 ± 2 °C under dry conditions. Additionally, in situ DRIFT and XPS results suggested that the accumulation of peroxide (O₂^2-) and the conversion of O₂^2- to lattice oxygen over the oxygen vacancies caused catalyst deactivation. However, O₂^2- could be desorbed completely by continuous N₂ purging at approximately 350 °C. This study provides significant insights for developing highly active α-Fe₂O₃ catalysts for O₃ decomposition.

Catalytic ozonation of VOCs at low temperature: A comprehensive review

VOCs abatement has attracted increasing interest because of the detrimental effects on both atmospheric environment and human beings of VOCs. The assistance of ozone has enabled efficient VOCs removal at low temperature. Thereby, catalytic ozonation is considered as one of the most feasible and effective methods for VOCs elimination. This work systematically reviews the emerging advances of catalytic ozonation of different VOCs (i.e., aromatic hydrocarbons, oxygenated VOCs, chlorinated VOCs, sulfur-containing VOCs, and saturated alkanes) over various functional catalysts. General reaction mechanism of catalytic ozonation including both Langmuir-Hinshelwood and Mars-van-Krevelen mechanisms was proposed depending on the reactive oxygen species involving the reactions. The influence of reaction conditions (water vapor and temperature) is fully discussed. This review also introduces the enhanced VOCs oxidation via catalytic ozonation in the ozone-generating systems including plasma and vacuum ultraviolet. Lastly, the existing challenges of VOCs catalytic ozonation are presented, and the perspective of this technology is envisioned.

Engineering of Mn3O4@Ag microspheres assembled from nanosheets for superior O3 decomposition

A topochemical transformation route was designed for synthesis of Mn3O4 nanospheres using β-MnOOH as the precursor. Ag nanoparticles were doped via an in situ redox reaction to obtain Mn3O4@Ag-NF, which displayed an enhanced performance for O3 elimination.

A flexible self-healing Zn3V2O7(OH)2·2H2O-based Zn-ion battery under continuous folding and twisting

Engineering flexible and self-healing batteries is significant for wearable electronics. Here, we develop a flexible self-healing Zn-ion battery with a three-dimensional Zn3V2O7(OH)2·2H2O cathode working with polyvinyl alcohol and Zn2+/Mn2+ ions-based...

Enhanced activity and water tolerance promoted by Ce on MnO/ZSM-5 for ozone decomposition

Catalytic decomposition is a promising way to eliminate ozone using manganese oxides. However, water-induced deactivation of the catalysts remains a challenge for further application. In this work, a series of Ce-promoted MnO supported on ZSM-5 (Mn-xCe/ZSM-5) were developed for ozone decomposition, which exhibited superior catalytic performance. The catalysts were characterized by multiple techniques. It is indicated that MnO was highly dispersed on ZSM-5 (Mn/ZSM-5), accounting for the high performance of ozone decomposition. Addition of Ce in Mn/ZSM-5 formed abundant redox pairs that promoted electron transfer, and thus exhibited superior ozone decomposition activity. Mn-3Ce/ZSM-5 with medium Ce loading showed the maximum activity by exposing the most active sites. Furthermore, Mn-3Ce/ZSM-5 was highly water-resistant in comparison with Mn/ZSM-5 by modulating the surface acidic property to be beneficial for the water desorption. This work provides an efficient and facile way to fabricate Ce-promoted Mn with low valence for effective and stable decomposition of ozone at room temperature.

Encapsulate α-MnO2 nanofiber within graphene layer to tune surface electronic structure for efficient ozone decomposition

Major challenges encountered when developing manganese-based materials for ozone decomposition are related to the low stability and water inactivation. To solve these problems, a hierarchical structure consisted of graphene encapsulating α-MnO₂ nanofiber was developed. The optimized catalyst exhibited a stable ozone conversion efficiency of 80% and excellent stability over 100 h under a relative humidity (RH) of 20%. Even though the RH increased to 50%, the ozone conversion also reached 70%, well beyond the performance of α-MnO₂ nanofiber. Here, surface graphite carbon was activated by capturing the electron from inner unsaturated Mn atoms. The excellent stability originated from the moderate local work function, which compromised the reaction barriers in the adsorption of ozone molecule and the desorption of the intermediate oxygen species. The hydrophobic graphene shells hindered the chemisorption of water vapour, consequently enhanced its water resistance. This work offered insights for catalyst design and would promote the practical application of manganese-based catalysts in ozone decomposition.

Ozone is a major air pollutant, but its elimination is challenging. Here the authors encapsulate defective α-MnO₂ nanofiber within ultrathin graphene shells to construct a hierarchical MnO₂@graphene catalyst for ozone decomposition that possesses high activity and stability under humid conditions.

Facile Synthesis of Birnessite δ-MnO2 and Carbon Nanotube Composites as Effective Catalysts for Li-CO2 Batteries

Li-CO₂ batteries are one type of promising energy storage and conversion devices to capture and utilize the greenhouse gas CO₂, mitigating global temperature rise and climate change. Catalysts that could effectively decompose the discharge product, Li₂CO₃, are essential for high-performance Li-CO₂ batteries. Benefiting from the interconnected porous structure, favorable oxygen vacancy, and the synergistic effects between the carbon nanotube (CNT) and layered birnessite δ-MnO₂, our Li-CO₂ cathodes with the as-prepared CNT@δ-MnO₂ catalyst can efficiently afford a large reaction surface area and abundant active sites, provide sufficient electron/Li⁺ transport pathways, and facilitate electrolyte infiltration and CO₂ diffusion, demonstrating low overpotential and superior cycling stability, which have been proven by both experimental characterization and theoretical computation. It is expected that this work can provide guidance for the design and synthesis of high-performance electrochemical catalysts for Li-CO₂ batteries.

A Self-Healing Flexible Quasi-Solid Zinc-Ion Battery Using All-In-One Electrodes

Self-healing and flexibility are significant for many emerging applications of secondary batteries, which have attracted broad attention. Herein, a self-healing flexible quasi-solid Zn-ion battery composing of flexible all-in-one cathode (VS2 nanosheets growing on carbon cloth) and anode (electrochemically deposited Zn nanowires), and a self-healing hydrogel electrolyte, is presented. The free-standing all-in-one electrodes enable a high capacity and robust structure during flexible transformation of the battery, and the hydrogel electrolyte possesses a good self-healing performance. The presented battery remains as a high retention potential even after healing from being cut into six pieces. When bending at 60°, 90°, and 180°, the battery capacities remain 124, 125, and 114 mAh g-1, respectively, cycling at a current density of 50 mA g-1. Moreover, after cutting and healing twice, the battery still delivers a stable capacity, indicating a potential use of self-healing and wearable electronics.

Synthesis of MnO2 derived from spent lithium-ion batteries via advanced oxidation and its application in VOCs oxidation

In this work, manganese is selectively and efficiently recovered from spent lithium-ion batteries via advanced oxidation by using potassium permanganate and ozone, and the transition metal-doped α-MnO₂ and β-MnO₂ are one-step prepared for catalytic oxidation of VOCs. The recovery rate of manganese can be approximately 100% while the recovery efficiency of cobalt, nickel, and lithium is less than 15%, 2%, and 1%, respectively. Compared with pure α-MnO₂ and β-MnO₂, transition metal-doped α-MnO₂ and β-MnO₂ exhibit better catalytic performance in toluene and formaldehyde removal attributed to their lower crystallinity, more defects, larger specific surface area, more oxygen vacancies, and better low-temperature redox ability. Besides, the introduction of the appropriate proportion of cobalt or nickel into MnO₂ can significantly improve its catalytic activity. Furthermore, the TD/GC-MS result indicates that toluene may be oxidized in the sequence of toluene - benzyl alcohol - benzaldehyde-benzoic acid - acetic acid, 2-cyclohexen-1-one, 4-hydroxy-, cyclopent-4-ene-1,3-dione - carbon dioxide. This method provides a route for the resource utilization of spent LIBs and the synthesis of MnO₂.

Perovskite CaZrO3 for efficient ozonation treatment of organic pollutants in wastewater

The presence of oxygen vacancy on the surface of CaZrO₃ accelerates the decomposition of ozone and generates reactive oxygen substances to act on the mineralization of m-cresol.

Exploring an efficient manganese oxide catalyst for ozone decomposition and its deactivation induced by water vapor

A series of MnO_x catalysts supported by carbon spheres were prepared by calcining mixtures of manganese acetate and carbon spheres under a nitrogen atmosphere, and their performance for ozone decomposition under high humidity conditions (RH = 90%) was evaluated.

Degradation of gaseous unsymmetrical dimethylhydrazine by vacuum ultraviolet coupled with MnO2

Enhanced degradation of gaseous UDMH under VUV irradiation by catalytic ozonation with MnO₂.

Nanostructured manganese oxides as highly active catalysts for enhanced hydrolysis of bis(4-nitrophenyl)phosphate and catalytic decomposition of methanol

The nanostructured manganese oxides (MnOx) exhibited high catalytic activities for hydrolysis of phosphate diester-based substrate bis(4-nitrophenyl)phosphate and decomposition of methanol to carbon monoxide and hydrogen as a potential alternative fuel.

Recent advances in catalytic decomposition of ozone

Ozone (O₃), as a harmful air pollutant, has been of wide concern. Safe, efficient, and economical O₃ removal methods urgently need to be developed. Catalytic decomposition is the most promising method for O₃ removal, especially at room temperature or even subzero temperatures. Great efforts have been made to develop high-efficiency catalysts for O₃ decomposition that can operate at low temperatures, high space velocity and high humidity. First, this review describes the general reaction mechanism of O₃ decomposition on noble metal and transition metal oxide catalysts. Then, progress on the O₃ decomposition performance of various catalysts in the past 30 years is summarized in detail. The main focus is the O₃ decomposition performance of manganese oxides, which are divided into supported manganese oxides and non-supported manganese oxides. Methods to improve the activity, stability, and humidity resistance of manganese oxide catalysts for O₃ decomposition are also summarized. The deactivation mechanisms of manganese oxides under dry and humid conditions are discussed. The O₃ decomposition performance of monolithic catalysts is also summarized from the perspective of industrial applications. Finally, the future development directions and prospects of O₃ catalytic decomposition technology are put forward.

Melt-spun modified poly (styrene-co-butyl acrylate) fiber as a carrier to support manganese oxide and its application in dye wastewater decolorization

Polymer fiber, a kind of versatile material, has been widely used in many fields. However, emerging applications still urge us to develop some new kinds of fibers. Advanced oxidation processes (AOPs) have created a promising prospect for organic wastewater decontamination; thus, it is of important significance to design a kind of special fiber that can be applied in AOPs. In this work, a viable route is proposed to fabricate manganese oxide-supporting melt-spun modified poly (styrene-co-butyl acrylate) fiber, and the prepared fiber has an excellent activity to catalyze H₂O₂ and O₃ to decolorize dye-containing water. The results show that the decolorization of a cationic blue solution can be completely accomplished within 10 min with the prepared fiber as a catalyst, and its decolorization efficiency can reach up to 96.2% within 40 min. The concentration of total organic carbon can decrease from 20.3 to 12.3 mg/L. The prepared fiber can be reused five times without any loss in decolorization efficiency. Compared with other manganese oxide-based catalysts reported in the literature, the prepared fiber also shows many advantages in decolorizing methylene blue such as easy separation, mild reaction condition, and high decolorization efficiency. Therefore, we are confident that the fiber introduced in this study will exhibit a great application potential in the field of dye wastewater treatment.

Electrostatic Air Filtration by Multifunctional Dielectric Heterocaking Filters with Ultralow Pressure Drop

In air filtration, for creating healthy indoor air, there is an intrinsic conflict between high filtration efficiency and low wind pressure drop. In this study, we overcame this conflict by developing new dielectric heterocaking (HC) filters, in which high relative dielectric constant (ε_r) materials were heterogeneously loaded on traditional polymer fibers. The dielectric HC filters in an electrostatic polarizing field generate a great amount of charges on their surface, leading to a strong attraction to precharged aerosol particles, and result in high filtration efficiency. Observing via a charged coupled device camera, the migration speed of aerosol smoke particles toward the polarized HC fiber exceeded those toward the unpolarized HC fiber by a factor of 6. We loaded high-ε_r HCs including manganese dioxide (MnO₂), activated carbon, zinc oxide (ZnO), copper oxide (CuO), and barium titanate (BaTiO₃) on polyurethane foams using a fast and large-scale roll-to-roll gel squeezing method. Based on the experimental results, when HCs had a ε_r larger than 5.1, an increased ε_r did not benefit electrostatic filtration efficiency for aerosol particles much, but resulted in a larger net ozone production. We suggested a MnO₂-HC filter for efficient and multifunctional filtration of indoor particles, ambient ozone, and formaldehyde with only 3.8 Pa pressure drop at 1.1 m/s filtration velocity. This efficient and cost-effective dielectric HC filter opens a new avenue for the design of multifunctional filters, which will facilitate its large-scale production and commercial application in the ventilation system for healthy buildings.

Detrimental role of residual surface acid ions on ozone decomposition over Ce-modified γ-MnO2 under humid conditions

In the study, the catalyst precursors of Ce-modified γ-MnO₂ were washed with deionized water until the pH value of the supernatant was 1, 2, 4 and 7, and the obtained catalysts were named accordingly. Under space velocity of 300,000 hr^-1, the ozone conversion over the pH = 7 catalyst under dry conditions and relative humidity of 65% over a period of 6 hr was 100% and 96%, respectively. However, the ozone decomposition activity of the pH = 2 and 4 catalysts distinctly decreased under relative humidity of 65% compared to that under dry conditions. Detailed physical and chemical characterization demonstrated that the residual sulfate ions on the pH = 2 and 4 catalysts decreased their hydrophobicity and then restrained humid ozone decomposition activity. The pH = 2 and 4 catalysts had inferior resistance to high space velocity under dry conditions, because the residual sulfate ion on their surface reduced their adsorption capacity for ozone molecules and increased their apparent activation energies, which was proved by temperature programmed desorption of O₂ and kinetic experiments. Long-term activity testing, X-ray photoelectron spectroscopy and density functional theory calculations revealed that there were two kinds of oxygen vacancies on the manganese dioxide catalysts, one of which more easily adsorbed oxygen species and then became deactivated. This study revealed the detrimental effect of surface acid ions on the activity of catalysts under humid and dry atmospheres, and provided guidance for the development of highly efficient catalysts for ozone decomposition.

Gram-scale synthesis of ultra-fine Cu2O for highly efficient ozone decomposition

Dozens of grams of ultra-fine Cu₂O with efficient ozone decomposition was prepared by a facile liquid phase reduction method at room temperature.

Porous manganese oxides synthesized with natural products at room temperature: a superior humidity-tolerant catalyst for ozone decomposition

Porous cerium-doped manganese oxides have been facilely synthesized with dopamine and exhibit prominent activity and humidity tolerance for O₃ decomposition.

Unravelling the efficient catalytic performance of ozone decomposition over nitrogen-doped manganese oxide catalysts under high humidity

Nitrogen-doped Mn species, coated with a carbon layer of several nanometers in thickness, for enhanced water vapor resistance.