Multifold Enhanced Photon Upconversion in a Composite Annihilator System Sensitized by Perovskite Nanocrystals

Photon upconversion via triplet-triplet annihilation (TTA-UC) provides a pathway to overcoming the thermodynamic efficiency limits in single-junction solar cells by allowing the harvesting of sub-bandgap photons. Here, we use mixed halide perovskite nanocrystals (CsPbX3, X = Br/I) as triplet sensitizers, with excitation transfer to 9,10-diphenylanthracene (DPA) and/or 9,10-bis[(triisopropylsilyl)ethynyl]anthracene (TIPS-An) which act as the triplet annihilators. We observe that the upconversion efficiency is five times higher with the combination of both annihilators in a composite system compared to the sum of the individual single-acceptor systems. Our work illustrates the importance of using a composite system of annihilators to enhance TTA upconversion, demonstrated in a perovskite-sensitized system, with promise for a range of potential applications in light-harvesting, biomedical imaging, biosensing, therapeutics, and photocatalysis.

Triplet transfer from PbS quantum dots to tetracene ligands: is faster always better?

Quantum dot-organic semiconductor hybrid materials are gaining increasing attention as spin mixers for applications ranging from solar harvesting to spin memories. Triplet energy transfer between the inorganic quantum dot (QD) and organic semiconductor is a key step to understand in order to develop these applications. Here we report on the triplet energy transfer from PbS QDs to four energetically and structurally similar tetracene ligands. Even with similar ligands we find that the triplet energy transfer dynamics can vary significantly. For TIPS-tetracene derivatives with carboxylic acid, acetic acid and methanethiol anchoring groups on the short pro-cata side we find that triplet transfer occurs through a stepwise process, mediated via a surface state, whereas for monosubstituted TIPS-tetracene derivative 5-(4-benzoic acid)-12-triisopropylsilylethynyl tetracene (BAT) triplet transfer occurs directly, albeit slower, via a Dexter exchange mechanism. Even though triplet transfer is slower with BAT the overall yield is greater, as determined from upconverted emission using rubrene emitters. This work highlights that the surface-mediated transfer mechanism is plagued with parasitic loss pathways and that materials with direct Dexter-like triplet transfer are preferred for high-efficiency applications.

Efficient solid-state infrared-to-visible photon upconversion on atomically thin monolayer semiconductors

Upconverting infrared light into visible light via the triplet-triplet annihilation process in solid state is important for various applications including photovoltaics, photodetection, and bioimaging. Although inorganic semiconductors with broad absorption and negligible exchange energy loss have emerged as promising alternative to molecular sensitizers, currently, they have exclusively suffered from low efficiency and contained toxic elements in near-infrared (NIR)-to-visible upconversion. Here, we report an ultrathin bilayer film for NIR-to-visible upconversion based on atomically thin two-dimensional (2D) monolayer semiconductors. The atomic flatness and strong light absorption of 2D monolayer semiconductors enable ultrafast energy transfer and robust NIR-to-visible emission with a high upconversion quantum yield (1.1 ± 0.2%) at modest incident power (260 mW cm^-2). Increasing layer thickness adversely quenches the upconversion emission, highlighting the 2D advantage. Considering the whole library of 2D semiconductors, the facile large-scale production and the ultrathin solid-state architecture open a new research field for solid-state upconversion applications.

A Sensitizer of Purpose: Generating Triplet Excitons with Semiconductor Nanocrystals

The process of photon upconversion promises importance for many optoelectronic applications, as it can result in higher efficiencies and more effective photon management. Upconversion via triplet-triplet annihilation (TTA) occurs at low incident powers and at high efficiencies, requirements for integration into existing optoelectronic devices. Semiconductor nanocrystals are a diverse class of triplet sensitizers with advantages over traditional molecular sensitizers such as energetic tunability and minimal energy loss during the triplet sensitization process. In this Perspective, we review current progress in semiconductor nanocrystal triplet sensitization, specifically focusing on the nanocrystal, the ligand shell which surrounds the nanocrystal, and progress in solid-state sensitization. Finally, we discuss potential areas of improvement which could result in more efficient upconversion systems sensitized by semiconductor nanocrystals. Specifically, we focus on the development of solid-state TTA upconversion systems, elucidation of the energy transfer mechanisms from nanocrystal to transmitter ligand which underpin the upconversion process and propose novel configurations of nanocrystal-sensitized systems.

Two-dimensional transition metal dichalcogenides as an emerging platform for singlet fission solar cells

Singlet fission, a rapid exciton doubling process via inverse Auger recombination, is recognized as one of the most practical and feasible means for overcoming the Shockley-Queisser limit. Singlet fission solar cells are generally developed by integrating photon downconversion organic semiconductors into conventional photovoltaic devices to break the maximum photovoltaic response of the host semiconductors by virtue of extra triplet excitons. In this regard, proper matching of two different semiconductors and heterointerface engineering are both crucial for highly efficient singlet fission solar cells. Therefore, the aim of this study is to review the prerequisite conditions for efficient triplet transfer at the heterointerfaces and thus highlight the robust spin and valley degrees of freedom of transition metal dichalcogenides with the ultimate goal of stimulating research into next-generation singlet fission solar cells.

The Rise and Future of Discrete Organic-Inorganic Hybrid Nanomaterials

Hybrid nanomaterials (HNs), the combination of organic semiconductor ligands attached to nanocrystal semiconductor quantum dots, have applications that span a range of practical fields, including biology, chemistry, medical imaging, and optoelectronics. Specifically, HNs operate as discrete, tunable systems that can perform prompt fluorescence, energy transfer, singlet fission, upconversion, and/or thermally activated delayed fluorescence. Interest in HNs has naturally grown over the years due to their tunability and broad spectrum of applications. This Review presents a brief introduction to the components of HNs, before expanding on the characterization and applications of HNs. Finally, the future of HN applications is discussed.

Entropy-Powered Endothermic Energy Transfer from CsPbBr3 Nanocrystals for Photon Upconversion

Colloidal semiconductor nanocrystals as triplet photosensitizers are characterized by a negligible intersystem crossing energy loss as compared to that of traditional molecular sensitizers. This property in principle allows for a large apparent anti-Stokes shift in sensitized triplet-triplet annihilation photon upconversion (TTA-UC) for a variety of applications. In previous systems, however, this advantage is largely erased by the energy loss associated with energy transfer from nanocrystals to surface-anchored triplet transmitter molecules. Here we report visible-to-ultraviolet TTA-UC from 473 to 355 nm, corresponding to an apparent anti-Stokes shift of 0.87 eV, with a quantum efficiency that reaches 4.5% (normalized at 100%). The system consists of CsPbBr₃ nanocrystal sensitizers, phenanthrene transmitters, and diphenyloxazole annihilators. Time-resolved spectroscopy reveals that triplet energy transfer from CsPbBr₃ nanocrystals to phenanthrene can be endothermic yet efficient thanks to a sizable entropic gain. This study exemplifies how entropic effects can be harnessed to enhance or control a plethora of applications with nanocrystals as photosensitizers.

Thermodynamics of nanocrystal–ligand binding through isothermal titration calorimetry

Manipulations of nanocrystal (NC) surfaces have propelled the applications of colloidal NCs across various fields such as bioimaging, catalysis, electronics, and sensing applications.

Ultra-small PbS nanocrystals as sensitizers for red-to-blue triplet-fusion upconversion

Photon upconversion is a strategy to generate high-energy excitations from low-energy photon input, enabling advanced architectures for imaging and photochemistry. Here, we show that ultra-small PbS nanocrystals can sensitize red-to-blue triplet-fusion upconversion with a large anti-Stokes shift (ΔE = 1.04 eV), and achieve max-efficiency upconversion at near-solar fluences (I th = 220 mW cm-2) despite endothermic triplet sensitization. This system facilitates the photo-initiated polymerization of methyl methacrylate using only long-wavelength light (λ exc: 637 nm); a demonstration of nanocrystal-sensitized upconversion photochemistry. Time-resolved spectroscopy and kinetic modelling clarify key loss channels, highlighting the benefit of long-lifetime nanocrystal sensitizers, but revealing that many (48%) excitons that reach triplet-extracting carboxyphenylanthracene ligands decay before they can transfer to free-floating acceptors-emphasizing the need to address the reduced lifetimes that we determine for molecular triplets near the nanocrystal surface. Finally, we find that the inferred thermodynamics of triplet sensitization from these ultra-small PbS quantum dots are surprisingly favourable-completing an advantageous suite of properties for upconversion photochemistry-and do not vary significantly across the ensemble, which indicates minimal effects from nanocrystal heterogeneity. Together, our demonstration and study of red-to-blue upconversion using ultra-small PbS nanocrystals in a quasi-equilibrium, mildly endothermic sensitization scheme offer design rules to advance implementations of triplet fusion, especially where large anti-Stokes wavelength shifts are sought.

Interfacial Trap-Assisted Triplet Generation in Lead Halide Perovskite Sensitized Solid-State Upconversion

Photon upconversion via triplet-triplet annihilation (TTA) has promise for overcoming the Shockley-Queisser limit for single-junction solar cells by allowing the utilization of sub-bandgap photons. Recently, bulk perovskites have been employed as sensitizers in solid-state upconversion devices to circumvent poor exciton diffusion in previous nanocrystal (NC)-sensitized devices. However, an in-depth understanding of the underlying photophysics of perovskite-sensitized triplet generation is still lacking due to the difficulty of precisely controlling interfacial properties of fully solution-processed devices. In this study, interfacial properties of upconversion devices are adjusted by a mild surface solvent treatment, specifically altering perovskite surface properties without perturbing the bulk perovskite. Thermal evaporation of the annihilator precludes further solvent contamination. Counterintuitively, devices with more interfacial traps show brighter upconversion. Approximately an order of magnitude difference in upconversion brightness is observed across different interfacial solvent treatments. Sequential charge transfer and interfacial trap-assisted triplet sensitization are demonstrated by comparing upconversion performance, transient photoluminescence dynamics, and magnetic field dependence of the devices. Incomplete triplet conversion from transferred charges and consequent triplet-charge annihilation (TCA) are also observed. The observations highlight the importance of interfacial control and provide guidance for further design and optimization of upconversion devices using perovskites or other semiconductors as sensitizers.

Controlling Thermally Activated Delayed Photoluminescence in CdSe Quantum Dots through Triplet Acceptor Surface Coverage

Quantum-dot/molecule composites (QD/mol) have demonstrated useful photochemical properties for many photonic and optoelectronic applications; however, a comprehensive understanding of these materials remains elusive. This work introduces a series of cadmium(II) selenide/1-pyrenecarboxylic acid (CdSe/PCA) nanomaterials featuring bespoke PCA surface coverage on CdSe585 (coded by the peak of the first exciton absorption band) to glean insight into the QD/mol photophysical behavior. Tailoring the energy gap between the CdSe585 first exciton band (2.1 eV) and the lowest PCA triplet level (T₁ = 2.0 eV) to be nearly isoenergetic, strong thermally activated delayed photoluminescence (TADPL) is observed resulting from reverse triplet-triplet energy transfer. The resultant average decay time constant (τ_obs) of the photoluminescence emanating from CdSe585 is deterministically controlled with surface-bound PCA_n chromophores (n = average number of adsorbed PCA molecules) by shifting the triplet excited state equilibrium from the CdSe585 to the PCA molecular triplet reservoir as a function of n.

Triplet energy migration pathways from PbS quantum dots to surface-anchored polyacenes controlled by charge transfer

Sensitization of molecular triplets using PbS quantum dots (QDs), followed by efficient triplet fusion, has been developed as a novel route to near-infrared-to-visible photon upconversion. Fundamentally, however, the mechanisms of triplet energy transfer (TET) from PbS QDs to surface-anchored polyacence acceptors remain highly debated. Here we study and side-by-side compare the kinetic pathways of TET from photoexcited PbS QDs to surface-anchored tetracene and pentacene derivatives using broad-band transient absorption spectroscopy spanning multiple decades of timescales. We find that the TET pathways are dictated by charge-transfer energetics at the QD/molecule interface. Charge transfer from QDs to tetracene was strongly endothermic, and hence spectroscopy showed one-step transformation from QD excited states to tetracene triplets in 302 ns. In contrast, hole transfer from QDs to pentacene was thermodynamically favoured and was confirmed by the formation of pentacene cation radicals in 13 ps, which subsequently evolved into pentacene triplets through a 101 ns electron transfer process. These results not only are consistent with a recently-established framework of charge-transfer-mediated TET, but also provide a route to manipulate triplet sensitization using lead-salt QDs for efficient upconversion of near-infrared photons.

Prospects of Coupled Organic-Inorganic Nanostructures for Charge and Energy Transfer Applications

We review the field of organic-inorganic nanocomposites with a focus on materials that exhibit a significant degree of electronic coupling across the hybrid interface. These nanocomposites undergo a variety of charge and energy transfer processes, enabling optoelectronic applications in devices which exploit singlet fission, triplet energy harvesting, photon upconversion or hot charge carrier transfer. We discuss the physical chemistry of the most common organic and inorganic components. Based on those we derive synthesis and assembly strategies and design criteria on material and device level with a focus on photovoltaics, spin memories or optical upconverters. We conclude that future research in the field should be directed towards an improved understanding of the binding motif and molecular orientation at the hybrid interface.

Optimal quantum dot size for photovoltaics with fusion

Light fusion increases the efficiency of solar cells by converting photons with lower energy than the bandgap into higher energy photons. The solar cell converts the product photons to current. We use Monte Carlo simulation to predict that lead sulfide (PbS) quantum dot sensitizers will enable fusion with a figure of merit on the mA cm-2 scale, exceeding current records, while enabling silicon cell compatibility. Performance is highly sensitive to quantum dot size, on the order of mA cm-2 nm-1.

Thiol-Anchored TIPS-Tetracene Ligands with Quantitative Triplet Energy Transfer to PbS Quantum Dots and Improved Thermal Stability

Triplet energy transfer between inorganic quantum dots (QDs) and organic materials plays a fundamental role in many optoelectronic applications based on these nanocomposites. Attaching organic molecules to the QD as transmitter ligands has been shown to facilitate transfer both to and from QDs. Here we show that the often disregarded thiol anchoring group can achieve quantitative triplet energy transfer yields in a PbS QD system with 6,11-bis[(triisopropylsilyl)ethynyl]tetracene-2-methylthiol (TET-SH) ligands. We demonstrate efficient triplet transfer in a singlet fission-based photon multiplication system with 5,12-bis[(triisopropylsilyl)ethynyl]tetracene generating triplets in solution that transfer to the PbS QDs via the thiol ligand TET-SH. Importantly, we demonstrate the increased thermal stability of the PbS/TET-SH system, compared to the traditional carboxylic acid counterpart, allowing for higher photoluminescence quantum yields.

High Photon Upconversion Efficiency with Hybrid Triplet Sensitizers by Ultrafast Hole-Routing in Electronic-Doped Nanocrystals

Low-power photon upconversion (UC) based on sensitized triplet-triplet annihilation (sTTA) is considered as the most promising upward wavelength-shifting technique to enhance the light-harvesting capability of solar devices. Colloidal nanocrystals (NCs) with conjugated organic ligands have been recently proposed to extend the limited light-harvesting capability of molecular absorbers. Key to their functioning is efficient energy transfer (ET) from the NC to the triplet state of the ligands that sensitize free annihilator moieties responsible for the upconverted luminescence. The ET efficiency is typically limited by parasitic processes, above all nonradiative hole-transfer to the ligand highest occupied molecular orbital (HOMO). Here, a new exciton-manipulation approach is demonstrated that enables loss-free ET by electronically doping CdSe NCs with gold impurities that introduce a hole-accepting intragap state above the HOMO energy of 9-anthracene acid ligands. Upon photoexcitation, the NC photoholes are rapidly routed to the Au-level, producing a long-lived bound exciton in perfect resonance with the ligand triplet. This hinders hole-transfer leading to ≈100% efficient ET that translates into an upconversion quantum yield as high as ≈12% (≈24% in the normalized definition), which is the highest performance for NC-based upconverters based on sTTA to date and approaches the record efficiency of optimized organic systems.

Experimental study of the size-dependent photoluminescence emission of CBD-grown PbSe nanocrystals on glass

In this work, we study the size-dependent properties of Photoluminescence (PL) emissions of PbSe Nanocrystals (NCs) grown by Chemical Bath Deposition (CBD) method. In previous studies, PL emissions have been tuned by CBD-grown PbSe, and the growth mechanism was dependent on crystalized substrates such as GaAs. In this research, however, PL emissions are controlled over the midinfrared (MIR) range, through PbSe NCs, which are deposited on glass as an amorphous material. This study proposes an alternative approach to control PL emissions, which provides us with more freedom to fabricate low-cost MIR light sources as crucial components in remote sensing and gas analysis. Moreover, in this study, the advantage of the post-thermal method to control the NCs size, compared to the growth temperature, is shown.

Engineering 3D perovskites for photon interconversion applications

In this review, we highlight the current advancements in the field of triplet sensitization by three-dimensional (3D) perovskite nanocrystals and bulk films. First introduced in 2017, 3D perovskite sensitized upconversion (UC) is a young fast-evolving field due to the tunability of the underlying perovskite material. By tuning the perovskite bandgap, visible-to-ultraviolet, near-infrared-to-visible or green-to-blue UC has been realized, which depicts the broad applicability of this material. As this research field is still in its infancy, we hope to stimulate the field by highlighting the advantages of these perovskite nanocrystals and bulk films, as well as shedding light onto the current drawbacks. In particular, the keywords toxicity, reproducibility and stability must be addressed prior to commercialization of the technology. If successful, photon interconversion is a means to increase the achievable efficiency of photovoltaic cells beyond its current limits by increasing the window of useable wavelengths.

Impact of t-butyl substitution in a rubrene emitter for solid state NIR-to-visible photon upconversion

Solid state NIR-to-visible photon upconversion (UC) mediated by triplet-triplet annihilation (TTA) is necessitated by numerous practical applications. Yet, efficient TTA-UC remains a highly challenging task. In this work palladium phthalocyanine-sensitized NIR-to-vis solid UC films based on a popular rubrene emitter are thoroughly studied with the primary focus on revealing the impact of t-butyl substitution in rubrene on the TTA-UC performance. The solution-processed UC films were additionally doped with a small amount of emissive singlet sink tetraphenyldibenzoperiflanthene (DBP) for collecting upconverted singlets from rubrene and in this way diminishing detrimental singlet fission. Irrespective of the excitation conditions used, t-butyl-substituted rubrene (TBR) was found to exhibit enhanced TTA-UC performance as compared to that of rubrene at an optimal emitter doping of 80 wt% in polystyrene films. Explicitly, in the TTA dominated regime attained at high excitation densities, 4-fold higher UC quantum yield (ΦUC) achieved in TBR-based films was caused by the reduced fluorescence concentration quenching mainly due to suppressed singlet fission. Under low light conditions, i.e. in the regime governed by spontaneous triplet decay, even though triplet exciton diffusion was obstructed in TBR films by t-butyl moieties, the subsequently reduced TTA rate was counterbalanced by both suppressed singlet fission and non-radiative triplet quenching, still ensuring higher ΦUC of these films as compared to those of unsubstituted rubrene films.

Triplet-Fusion Upconversion Using a Rigid Tetracene Homodimer

We demonstrate that a structurally rigid, weakly coupled molecular dimer can replace traditional monomeric annihilators for triplet fusion upconversion (TUC) in solution by observing emitted photons (λ = 540 nm) from a norbornyl-bridged tetracene homodimer following excitation of a triplet sensitizer at λ = 730 nm. Intriguingly, steady-state spectroscopy, kinetic simulations, and Stern-Volmer quenching experiments show that the dimer exhibits qualitatively different photophysics than its parent monomer: it is less effective at diffusion-mediated triplet exciton transfer, but it fuses extracted triplets more efficiently. Our results support the development of composite triplet-fusion platforms that go beyond diffusion-mediated triplet extraction, ultimately circumventing the concentration dependence of solution-phase TUC.

Influence of Triplet Diffusion on Lead Halide Perovskite-Sensitized Solid-State Upconversion

The emerging field of lead halide perovskite-sensitized triplet-triplet annihilation (TTA) in rubrene shows great promise in upconversion applications. By rapidly transferring single charge carriers instead of bound triplet states, perovskites enable a high triplet population in rubrene, yielding low I_th values. In this contribution, we investigate the role of the triplet population on the upconverted emission. Interestingly, two independent rates of TTA can be observed, as well as a sharp drop in the visible emission intensity over several seconds. This effect can be attributed to the triplet-density-based diffusion length: (i) at low triplet populations slow diffusion-mediated TTA yields singlets far from the interface and (ii) higher triplet populations lead to rapid TTA close to the perovskite/rubrene interface. Because of the proximity of the strongly absorbing perovskite, the singlet states created closer to the interface undergo stronger back-transfer to the perovskite film and therefore appear to exhibit a lower photoluminescence quantum yield.

A Heterogeneous Kinetics Model for Triplet Exciton Transfer in Solid-State Upconversion

High internal quantum efficiency semiconductor nanocrystal (NC)-based photon upconversion devices are currently based on a single monolayer of active NCs. Devices are therefore limited in their external quantum efficiency based on the low number of photons absorbed. Increasing the number of photons absorbed is expected to increase the upconversion efficiency, yet experimentally increasing the number of layers does not appreciably increase the upconverted light output. We unravel this mystery by combining kinetic modeling and transient photoluminescence spectroscopy. The inherent energetic disorder stemming from the polydispersity of the NCs means that the kinetics are governed by a stochastic transfer matrix. By drawing the rates from a probabilistic distribution and constructing a reaction network with realistic connectivity, we are able to fit complex photoluminescence traces with a very simple model. We use this model to explain the thickness-dependent performance of the upconversion devices and can attribute the reduced efficiencies to the low excitonic diffusivity of the exciton within the NC layers and increased back transfer of the created singlets from the organic annihilator rubrene. We suggest some avenues for overcoming these limitations in future devices.

Preparation and application of solid-state upconversion materials based on sodium polyacrylate

By loading a microemulsion containing both sensitizer and emitter into porous sodium polyacrylate (PAAS), a water-absorbent resin (WAR) upconversion (UC) material was fabricated for photocatalysis applications. This WAR UC material showed a highly efficient UC process in the ambient environment owing to its liquid/solid encapsulation structure. In the application measurement, the UC emission from WAR UC materials can excite the catalyst Pt/WO3 to produce hydroxyl radicals, yielding 7-hydroxycoumarin by reacting with coumarin. In another case, since the band gap of ZnCdS matches the energy of UC emission, hole-electron pairs can be obtained under the UC irradiation and capture electrons from rhodamine B, leading to the degradation of rhodamine B. The maximum of the photocatalysis efficiency can be up to 97%. This work solves the oxygen quenching problem by preparing a triplet-triplet annihilation upconversion (TTA-UC) O/W microemulsion and loading it into PAAS WAR, and opens a new avenue to solid-state devices for TTA-UC. The applications of photocatalytic synthesis and photocatalytic degradation lay a foundation for future practical applications for TTA-UC materials.

Triplet-Triplet Annihilation Upconversion in Broadly Absorbing Layered Film Systems for Sub-Bandgap Photocatalysis

Upconversion (UC) of sub-bandgap photons extends the effective light absorption range of photovoltaic and photocatalytic devices, allowing them to reach higher conversion efficiencies. Recent advances in polymer host materials make it possible to translate triplet-triplet annihilation (TTA)-UC, the UC mechanism most suitable for this purpose, to solid films that can be integrated into devices. The promise of these films is currently limited by the narrow light absorption of TTA-UC sensitizer chromophores, but incorporating multiple sensitizers into layered film systems presents a promising strategy for producing UC materials with broadened light absorption. This strategy is herein applied for photocatalytic air purification, demonstrating its use in a real-world application for the first time. We superimpose optimized red-to-blue and green-to-blue UC films within dual-layer systems and develop a new photocatalyst compatible with their fluorescence emission. By integrating the dual-layer UC film systems with films of this photocatalyst, we produce the first devices that use TTA-UC to harness both red and green sub-bandgap photons for hydroxyl radical generation and photocatalytic degradation of gaseous acetaldehyde, a model volatile organic compound (VOC). Under white light-emitting diode excitation, the dual-layer film systems' broadened light absorption enhances their devices' photocatalytic degradation efficiency, enabling them to degrade twice as much acetaldehyde as their single-sensitizer counterparts. We show that as a result of the different absorption profiles of the two sensitizers, the film order significantly impacts UC fluorescence and VOC degradation. By probing the influence of the excitation light source, excitation geometry, and chromophore spectral overlap on the film systems' UC performance, we propose a framework for the design of multilayer TTA-UC film systems suitable for integration with a variety of photovoltaic and photocatalytic devices.

Photon upconversion utilizing energy beyond the band gap of crystalline silicon with a hybrid TES-ADT/PbS quantum dots system

The recent introduction of inorganic semiconductor quantum dots (QDs) as triplet sensitizers for molecular semiconductors has led to significant interest in harvesting low energy photons, which can then be used for photon upconversion (PUC), via triplet-triplet annihilation (TTA). A key goal is the harvesting of photons from below the bandgap of crystalline silicon 1.12 eV (≈1100 nm) and their upconversion into the visible region. In practice, the systems demonstrated so far have been limited to harvesting photons with energies above 1.2 eV (≈1 μm), due to two reasons: firstly the need to use transmitter ligands which allow efficient energy harvesting from the QD but introduce an energy loss of larger than 200 meV in transmission from the QD to the annihilator, and secondly due to the use of molecules such as tetracene which cannot accept smaller energy than 1.2 eV. Here, we introduce a new strategy to overcome these difficulties by using a low energy triplet annihilator that also harvests excitations efficiently from QDs. Specifically, we show that 5,11-bis(triethylsilylethynyl)anthradithiophene (TES-ADT, triplet energy of 1.08 eV: ca. 1150 nm) functions as a triplet annihilator (20% TTA efficiency) while also rapidly extracting triplet excitons from lead sulfide (PbS) QDs with a rate constant of k = ca. 2 × 10^-8 s^-1 with an excitation at 1064 nm. This rate is consistent with an orbital overlap between TES-ADT and PbS QDs, which we propose is due to the thiophene group of TES-ADT, which enables a close association with the PbS surface, allowing this system to function both as annihilator and transmitter. Our results pave the way for the design of triplet annihilators that can closely associate with the QD surface and harvest low energy excitons with minute losses in energy during the TET process, with the ultimate goal of efficiently utilizing photon energy beyond the bandgap of crystalline silicon.

Colloidal semiconductor nanocrystals in energy transfer reactions

Excitonic energy transfer is a versatile mechanism by which colloidal semiconductor nanocrystals can interact with a variety of nanoscale species. This feature article will discuss the latest research on the key scenarios under which semiconductor nanocrystals can engage in energy transfer with other nanoparticles, organic fluorophores, and plasmonic nanostructures, highlighting potential technological benefits to be gained from such processes.